From ff065ddd96c233d27322de493fa023357939c888 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 20 Oct 2005 20:53:39 +1000 Subject: powerpc: Merge various powermac-related header files. Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all of these moved from asm-ppc to asm-powerpc. In each case the asm-ppc64 version (if there was one) was just a single line including the asm-ppc version. Signed-off-by: Paul Mackerras --- include/asm-powerpc/uninorth.h | 229 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 include/asm-powerpc/uninorth.h (limited to 'include/asm-powerpc/uninorth.h') diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h new file mode 100644 index 00000000000..f737732c386 --- /dev/null +++ b/include/asm-powerpc/uninorth.h @@ -0,0 +1,229 @@ +/* + * uninorth.h: definitions for using the "UniNorth" host bridge chip + * from Apple. This chip is used on "Core99" machines + * This also includes U2 used on more recent MacRISC2/3 + * machines and U3 (G5) + * + */ +#ifdef __KERNEL__ +#ifndef __ASM_UNINORTH_H__ +#define __ASM_UNINORTH_H__ + +/* + * Uni-N and U3 config space reg. definitions + * + * (Little endian) + */ + +/* Address ranges selection. This one should work with Bandit too */ +/* Not U3 */ +#define UNI_N_ADDR_SELECT 0x48 +#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ +#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ + +/* AGP registers */ +/* Not U3 */ +#define UNI_N_CFG_GART_BASE 0x8c +#define UNI_N_CFG_AGP_BASE 0x90 +#define UNI_N_CFG_GART_CTRL 0x94 +#define UNI_N_CFG_INTERNAL_STATUS 0x98 +#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 + +/* UNI_N_CFG_GART_CTRL bits definitions */ +#define UNI_N_CFG_GART_INVAL 0x00000001 +#define UNI_N_CFG_GART_ENABLE 0x00000100 +#define UNI_N_CFG_GART_2xRESET 0x00010000 +#define UNI_N_CFG_GART_DISSBADET 0x00020000 +/* The following seems to only be used only on U3 */ +#define U3_N_CFG_GART_SYNCMODE 0x00040000 +#define U3_N_CFG_GART_PERFRD 0x00080000 +#define U3_N_CFG_GART_B2BGNT 0x00200000 +#define U3_N_CFG_GART_FASTDDR 0x00400000 + +/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, + * revision 1.5 (x4 AGP) may need further changes. + * + * AGP_BASE register contains the base address of the AGP aperture on + * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, + * even if decoding of this address range is enabled in the address select + * register. Apparently, the only supported bases are 256Mb multiples + * (high 4 bits of that register). + * + * GART_BASE register appear to contain the physical address of the GART + * in system memory in the high address bits (page aligned), and the + * GART size in the low order bits (number of GART pages) + * + * The GART format itself is one 32bits word per physical memory page. + * This word contains, in little-endian format (!!!), the physical address + * of the page in the high bits, and what appears to be an "enable" bit + * in the LSB bit (0) that must be set to 1 when the entry is valid. + * + * Obviously, the GART is not cache coherent and so any change to it + * must be flushed to memory (or maybe just make the GART space non + * cachable). AGP memory itself doens't seem to be cache coherent neither. + * + * In order to invalidate the GART (which is probably necessary to inval + * the bridge internal TLBs), the following sequence has to be written, + * in order, to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * UNI_N_CFG_GART_ENABLE + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET + * UNI_N_CFG_GART_ENABLE + * + * As far as AGP "features" are concerned, it looks like fast write may + * not be supported but this has to be confirmed. + * + * Turning on AGP seem to require a double invalidate operation, one before + * setting the AGP command register, on after. + * + * Turning off AGP seems to require the following sequence: first wait + * for the AGP to be idle by reading the internal status register, then + * write in that order to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * 0 + * UNI_N_CFG_GART_2xRESET + * 0 + */ + +/* + * Uni-N memory mapped reg. definitions + * + * Those registers are Big-Endian !! + * + * Their meaning come from either Darwin and/or from experiments I made with + * the bootrom, I'm not sure about their exact meaning yet + * + */ + +/* Version of the UniNorth chip */ +#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ + +#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ +#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ +#define UNI_N_VERSION_150 0x0011 /* 1.5 */ +#define UNI_N_VERSION_200 0x0024 /* 2.0 */ +#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ +#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ +#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ + +/* This register is used to enable/disable various clocks */ +#define UNI_N_CLOCK_CNTL 0x0020 +#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ +#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ +#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ +#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ + +/* Power Management control */ +#define UNI_N_POWER_MGT 0x0030 +#define UNI_N_POWER_MGT_NORMAL 0x00 +#define UNI_N_POWER_MGT_IDLE2 0x01 +#define UNI_N_POWER_MGT_SLEEP 0x02 + +/* This register is configured by Darwin depending on the UniN + * revision + */ +#define UNI_N_ARB_CTRL 0x0040 +#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 +#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 +#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 +#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 + +/* This one _might_ return the CPU number of the CPU reading it; + * the bootROM decides whether to boot or to sleep/spinloop depending + * on this register beeing 0 or not + */ +#define UNI_N_CPU_NUMBER 0x0050 + +/* This register appear to be read by the bootROM to decide what + * to do on a non-recoverable reset (powerup or wakeup) + */ +#define UNI_N_HWINIT_STATE 0x0070 +#define UNI_N_HWINIT_STATE_SLEEPING 0x01 +#define UNI_N_HWINIT_STATE_RUNNING 0x02 +/* This last bit appear to be used by the bootROM to know the second + * CPU has started and will enter it's sleep loop with IP=0 + */ +#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 + +/* This register controls AACK delay, which is set when 2004 iBook/PowerBook + * is in low speed mode. + */ +#define UNI_N_AACK_DELAY 0x0100 +#define UNI_N_AACK_DELAY_ENABLE 0x00000001 + +/* Clock status for Intrepid */ +#define UNI_N_CLOCK_STOP_STATUS0 0x0150 +#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 +#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 +#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 +#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 +#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 +#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 +#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 +#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 +#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 +#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 +#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 +#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 +#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 +#define UNI_N_CLOCK_STOPPED_32 0x00000004 +#define UNI_N_CLOCK_STOPPED_45 0x00000002 +#define UNI_N_CLOCK_STOPPED_49 0x00000001 + +#define UNI_N_CLOCK_STOP_STATUS1 0x0160 +#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 +#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 +#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 +#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 +#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 +#define UNI_N_CLOCK_STOPPED_FW 0x00004000 +#define UNI_N_CLOCK_STOPPED_GB 0x00002000 +#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 +#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 +#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 +#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 +#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 +#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 +#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 +#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 +#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 +#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 +#define UNI_N_CLOCK_STOPPED_18 0x00000001 + +/* Intrepid registe to OF do-platform-clockspreading */ +#define UNI_N_CLOCK_SPREADING 0x190 + +/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ + + +/* + * U3 specific registers + */ + + +/* U3 Toggle */ +#define U3_TOGGLE_REG 0x00e0 +#define U3_PMC_START_STOP 0x0001 +#define U3_MPIC_RESET 0x0002 +#define U3_MPIC_OUTPUT_ENABLE 0x0004 + +/* U3 API PHY Config 1 */ +#define U3_API_PHY_CONFIG_1 0x23030 + +/* U3 HyperTransport registers */ +#define U3_HT_CONFIG_BASE 0x70000 +#define U3_HT_LINK_COMMAND 0x100 +#define U3_HT_LINK_CONFIG 0x110 +#define U3_HT_LINK_FREQ 0x120 + +#endif /* __ASM_UNINORTH_H__ */ +#endif /* __KERNEL__ */ -- cgit v1.2.3