/* * linux/arch/arm/plat-omap/gpio.c * * Support functions for OMAP GPIO * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include /* * OMAP1510 GPIO registers */ #define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 #define OMAP1510_GPIO_INT_CONTROL 0x0c #define OMAP1510_GPIO_INT_MASK 0x10 #define OMAP1510_GPIO_INT_STATUS 0x14 #define OMAP1510_GPIO_PIN_CONTROL 0x18 #define OMAP1510_IH_GPIO_BASE 64 /* * OMAP1610 specific GPIO registers */ #define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 #define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 #define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 #define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 #define OMAP1610_GPIO_IRQSTATUS1 0x0018 #define OMAP1610_GPIO_IRQENABLE1 0x001c #define OMAP1610_GPIO_WAKEUPENABLE 0x0028 #define OMAP1610_GPIO_DATAIN 0x002c #define OMAP1610_GPIO_DATAOUT 0x0030 #define OMAP1610_GPIO_DIRECTION 0x0034 #define OMAP1610_GPIO_EDGE_CTRL1 0x0038 #define OMAP1610_GPIO_EDGE_CTRL2 0x003c #define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c #define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 #define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 #define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc #define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* * OMAP730 specific GPIO registers */ #define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 #define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 #define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 #define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 #define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 #define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 #define OMAP730_GPIO_INT_CONTROL 0x0c #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 /* * omap24xx specific GPIO registers */ #define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000 #define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000 #define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000 #define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000 #define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000 #define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000 #define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000 #define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000 #define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000 #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 #define OMAP24XX_GPIO_SYSSTATUS 0x0014 #define OMAP24XX_GPIO_IRQSTATUS1 0x0018 #define OMAP24XX_GPIO_IRQSTATUS2 0x0028 #define OMAP24XX_GPIO_IRQENABLE2 0x002c #define OMAP24XX_GPIO_IRQENABLE1 0x001c #define OMAP24XX_GPIO_CTRL 0x0030 #define OMAP24XX_GPIO_OE 0x0034 #define OMAP24XX_GPIO_DATAIN 0x0038 #define OMAP24XX_GPIO_DATAOUT 0x003c #define OMAP24XX_GPIO_LEVELDETECT0 0x0040 #define OMAP24XX_GPIO_LEVELDETECT1 0x0044 #define OMAP24XX_GPIO_RISINGDETECT 0x0048 #define OMAP24XX_GPIO_FALLINGDETECT 0x004c #define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 #define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 #define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 #define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 #define OMAP24XX_GPIO_CLEARWKUENA 0x0080 #define OMAP24XX_GPIO_SETWKUENA 0x0084 #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 #define OMAP24XX_GPIO_SETDATAOUT 0x0094 /* * omap34xx specific GPIO registers */ #define OMAP34XX_GPIO1_BASE (void __iomem *)0x48310000 #define OMAP34XX_GPIO2_BASE (void __iomem *)0x49050000 #define OMAP34XX_GPIO3_BASE (void __iomem *)0x49052000 #define OMAP34XX_GPIO4_BASE (void __iomem *)0x49054000 #define OMAP34XX_GPIO5_BASE (void __iomem *)0x49056000 #define OMAP34XX_GPIO6_BASE (void __iomem *)0x49058000 struct gpio_bank { void __iomem *base; u16 irq; u16 virtual_irq_start; int method; u32 reserved_map; #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) u32 suspend_wakeup; u32 saved_wakeup; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; u32 saved_datain; u32 saved_fallingdetect; u32 saved_risingdetect; #endif spinlock_t lock; }; #define METHOD_MPUIO 0 #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 #define METHOD_GPIO_24XX 4 #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 }, }; #endif #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } }; #endif #ifdef CONFIG_ARCH_OMAP730 static struct gpio_bank gpio_bank_730[7] = { { OMAP_MPUIO_BASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, }; #endif #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, }; static struct gpio_bank gpio_bank_243x[5] = { { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, }; #endif #ifdef CONFIG_ARCH_OMAP34XX static struct gpio_bank gpio_bank_34xx[6] = { { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, }; #endif static struct gpio_bank *gpio_bank; static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { if (cpu_is_omap15xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1]; } if (cpu_is_omap16xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 4)]; } if (cpu_is_omap730()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 5)]; } if (cpu_is_omap24xx()) return &gpio_bank[gpio >> 5]; if (cpu_is_omap34xx()) return &gpio_bank[gpio >> 5]; } static inline int get_gpio_index(int gpio) { if (cpu_is_omap730()) return gpio & 0x1f; if (cpu_is_omap24xx()) return gpio & 0x1f; if (cpu_is_omap34xx()) return gpio & 0x1f; return gpio & 0x0f; } static inline int gpio_valid(int gpio) { if (gpio < 0) return -1; if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { if (gpio >= OMAP_MAX_GPIO_LINES + 16) return -1; return 0; } if (cpu_is_omap15xx() && gpio < 16) return 0; if ((cpu_is_omap16xx()) && gpio < 64) return 0; if (cpu_is_omap730() && gpio < 192) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; if (cpu_is_omap34xx() && gpio < 160) return 0; return -1; } static int check_gpio(int gpio) { if (unlikely(gpio_valid(gpio)) < 0) { printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); dump_stack(); return -1; } return 0; } static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { void __iomem *reg = bank->base; u32 l; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_IO_CNTL; break; #endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_DIR_CONTROL; break; #endif #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; #endif #ifdef CONFIG_ARCH_OMAP730 case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; #endif default: WARN_ON(1); return; } l = __raw_readl(reg); if (is_input) l |= 1 << gpio; else l &= ~(1 << gpio); __raw_writel(l, reg); } void omap_set_gpio_direction(int gpio, int is_input) { struct gpio_bank *bank; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); spin_lock(&bank->lock); _set_gpio_direction(bank, get_gpio_index(gpio), is_input); spin_unlock(&bank->lock); } static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) { void __iomem *reg = bank->base; u32 l = 0; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; else l &= ~(1 << gpio); break; #endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; else l &= ~(1 << gpio); break; #endif #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: if (enable) reg += OMAP1610_GPIO_SET_DATAOUT; else reg += OMAP1610_GPIO_CLEAR_DATAOUT; l = 1 << gpio; break; #endif #ifdef CONFIG_ARCH_OMAP730 case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; else l &= ~(1 << gpio); break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; else reg += OMAP24XX_GPIO_CLEARDATAOUT; l = 1 << gpio; break; #endif default: WARN_ON(1); return; } __raw_writel(l, reg); } void omap_set_gpio_dataout(int gpio, int enable) { struct gpio_bank *bank; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); spin_lock(&bank->lock); _set_gpio_dataout(bank, get_gpio_index(gpio), enable); spin_unlock(&bank->lock); } int omap_get_gpio_datain(int gpio) { struct gpio_bank *bank; void __iomem *reg; if (check_gpio(gpio) < 0) return -EINVAL; bank = get_gpio_bank(gpio); reg = bank->base; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_INPUT_LATCH; break; #endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_DATA_INPUT; break; #endif #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DATAIN; break; #endif #ifdef CONFIG_ARCH_OMAP730 case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; #endif default: return -EINVAL; } return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; } #define MOD_REG_BIT(reg, bit_mask, set) \ do { \ int l = __raw_readl(base + reg); \ if (set) l |= bit_mask; \ else l &= ~bit_mask; \ __raw_writel(l, base + reg); \ } while(0) void omap_set_gpio_debounce(int gpio, int enable) { struct gpio_bank *bank; void __iomem *reg; u32 val, l = 1 << get_gpio_index(gpio); if (cpu_class_is_omap1()) return; bank = get_gpio_bank(gpio); reg = bank->base; reg += OMAP24XX_GPIO_DEBOUNCE_EN; val = __raw_readl(reg); if (enable) val |= l; else val &= ~l; __raw_writel(val, reg); } EXPORT_SYMBOL(omap_set_gpio_debounce); void omap_set_gpio_debounce_time(int gpio, int enc_time) { struct gpio_bank *bank; void __iomem *reg; if (cpu_class_is_omap1()) return; bank = get_gpio_bank(gpio); reg = bank->base; enc_time &= 0xff; reg += OMAP24XX_GPIO_DEBOUNCE_VAL; __raw_writel(enc_time, reg); } EXPORT_SYMBOL(omap_set_gpio_debounce_time); #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, trigger & __IRQT_LOWLVL); MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, trigger & __IRQT_HIGHLVL); MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, trigger & __IRQT_RISEDGE); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, trigger & __IRQT_FALEDGE); if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (trigger != 0) __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA); else __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); } else { if (trigger != 0) bank->enabled_non_wakeup_gpios |= gpio_bit; else bank->enabled_non_wakeup_gpios &= ~gpio_bit; } /* * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only * level triggering requested. */ } #endif static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *reg = bank->base; u32 l = 0; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; break; #endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; break; #endif #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: if (gpio & 0x08) reg += OMAP1610_GPIO_EDGE_CTRL2; else reg += OMAP1610_GPIO_EDGE_CTRL1; gpio &= 0x07; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); if (trigger & __IRQT_RISEDGE) l |= 2 << (gpio << 1); if (trigger & __IRQT_FALEDGE) l |= 1 << (gpio << 1); if (trigger) /* Enable wake-up during idle for dynamic tick */ __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); else __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif #ifdef CONFIG_ARCH_OMAP730 case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); break; #endif default: goto bad; } __raw_writel(l, reg); return 0; bad: return -EINVAL; } static int gpio_irq_type(unsigned irq, unsigned type) { struct gpio_bank *bank; unsigned gpio; int retval; if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); else gpio = irq - IH_GPIO_BASE; if (check_gpio(gpio) < 0) return -EINVAL; if (type & ~IRQ_TYPE_SENSE_MASK) return -EINVAL; /* OMAP1 allows only only edge triggering */ if (!cpu_class_is_omap2() && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) return -EINVAL; bank = get_irq_chip_data(irq); spin_lock(&bank->lock); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); if (retval == 0) { irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; irq_desc[irq].status |= type; } spin_unlock(&bank->lock); return retval; } static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) { void __iomem *reg = bank->base; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: /* MPUIO irqstatus is reset by reading the status register, * so do nothing here */ return; #endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_STATUS; break; #endif #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif #ifdef CONFIG_ARCH_OMAP730 case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; #endif default: WARN_ON(1); return; } __raw_writel(gpio_mask, reg); /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (cpu_is_omap24xx() || cpu_is_omap34xx()) __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); #endif } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) { _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); } static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) { void __iomem *reg = bank->base; int inv = 0; u32 l; u32 mask; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_MASKIT; mask = 0xffff; inv = 1; break; #endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_MASK; mask = 0xffff; inv = 1; break; #endif #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: reg += OMAP1610_GPIO_IRQENABLE1; mask = 0xffff; break; #endif #ifdef CONFIG_ARCH_OMAP730 case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; break; #endif default: WARN_ON(1); return 0; } l = __raw_readl(reg); if (inv) l = ~l; l &= mask; return l; } static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) { void __iomem *reg = bank->base; u32 l; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_MASKIT; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); else l |= gpio_mask; break; #endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); else l |= gpio_mask; break; #endif #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: if (enable) reg += OMAP1610_GPIO_SET_IRQENABLE1; else reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; l = gpio_mask; break; #endif #ifdef CONFIG_ARCH_OMAP730 case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); else l |= gpio_mask; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; else reg += OMAP24XX_GPIO_CLEARIRQENABLE1; l = gpio_mask; break; #endif default: WARN_ON(1); return; } __raw_writel(l, reg); } static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) { _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); } /* * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. * 1510 does not seem to have a wake-up register. If JTAG is connected * to the target, system will wake up always on GPIO events. While * system is running all registered GPIO interrupts need to have wake-up * enabled. When system is suspended, only selected GPIO interrupts need * to have wake-up enabled. */ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) { switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock(&bank->lock); if (enable) { bank->suspend_wakeup |= (1 << gpio); enable_irq_wake(bank->irq); } else { disable_irq_wake(bank->irq); bank->suspend_wakeup &= ~(1 << gpio); } spin_unlock(&bank->lock); return 0; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (bank->non_wakeup_gpios & (1 << gpio)) { printk(KERN_ERR "Unable to modify wakeup on " "non-wakeup GPIO%d\n", (bank - gpio_bank) * 32 + gpio); return -EINVAL; } spin_lock(&bank->lock); if (enable) { bank->suspend_wakeup |= (1 << gpio); enable_irq_wake(bank->irq); } else { disable_irq_wake(bank->irq); bank->suspend_wakeup &= ~(1 << gpio); } spin_unlock(&bank->lock); return 0; #endif default: printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", bank->method); return -EINVAL; } } static void _reset_gpio(struct gpio_bank *bank, int gpio) { _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ static int gpio_wake_enable(unsigned int irq, unsigned int enable) { unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank; int retval; if (check_gpio(gpio) < 0) return -ENODEV; bank = get_irq_chip_data(irq); retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); return retval; } int omap_request_gpio(int gpio) { struct gpio_bank *bank; if (check_gpio(gpio) < 0) return -EINVAL; bank = get_gpio_bank(gpio); spin_lock(&bank->lock); if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) { printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio); dump_stack(); spin_unlock(&bank->lock); return -1; } bank->reserved_map |= (1 << get_gpio_index(gpio)); /* Set trigger to none. You need to enable the desired trigger with * request_irq() or set_irq_type(). */ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); #ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { void __iomem *reg; /* Claim the pin for MPU */ reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg); } #endif spin_unlock(&bank->lock); return 0; } void omap_free_gpio(int gpio) { struct gpio_bank *bank; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); spin_lock(&bank->lock); if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) { printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio); dump_stack(); spin_unlock(&bank->lock); return; } #ifdef CONFIG_ARCH_OMAP16XX if (bank->method == METHOD_GPIO_1610) { /* Disable wake-up during idle for dynamic tick */ void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; __raw_writel(1 << get_gpio_index(gpio), reg); } #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) { /* Disable wake-up during idle for dynamic tick */ void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; __raw_writel(1 << get_gpio_index(gpio), reg); } #endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _reset_gpio(bank, gpio); spin_unlock(&bank->lock); } /* * We need to unmask the GPIO bank interrupt as soon as possible to * avoid missing GPIO interrupts for other lines in the bank. * Then we need to mask-read-clear-unmask the triggered GPIO lines * in the bank to avoid missing nested interrupts for a GPIO line. * If we wait to unmask individual GPIO lines in the bank after the * line's interrupt handler has been run, we may miss some nested * interrupts. */ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { void __iomem *isr_reg = NULL; u32 isr; unsigned int gpio_irq; struct gpio_bank *bank; u32 retrigger = 0; int unmasked = 0; desc->chip->ack(irq); bank = get_irq_data(irq); #ifdef CONFIG_ARCH_OMAP1 if (bank->method == METHOD_MPUIO) isr_reg = bank->base + OMAP_MPUIO_GPIO_INT; #endif #ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP16XX) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif #ifdef CONFIG_ARCH_OMAP730 if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif while(1) { u32 isr_saved, level_mask = 0; u32 enabled; enabled = _get_gpio_irqbank_mask(bank); isr_saved = isr = __raw_readl(isr_reg) & enabled; if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) isr &= 0x0000ffff; if (cpu_class_is_omap2()) { level_mask = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); level_mask &= enabled; } /* clear edge sensitive interrupts before handler(s) are called so that we don't miss any interrupt occurred while executing them */ _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); _clear_gpio_irqbank(bank, isr_saved & ~level_mask); _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); /* if there is only edge sensitive GPIO pin interrupts configured, we could unmask GPIO bank interrupt immediately */ if (!level_mask && !unmasked) { unmasked = 1; desc->chip->unmask(irq); } isr |= retrigger; retrigger = 0; if (!isr) break; gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { struct irq_desc *d; int irq_mask; if (!(isr & 1)) continue; d = irq_desc + gpio_irq; /* Don't run the handler if it's already running * or was disabled lazely. */ if (unlikely((d->depth || (d->status & IRQ_INPROGRESS)))) { irq_mask = 1 << (gpio_irq - bank->virtual_irq_start); /* The unmasking will be done by * enable_irq in case it is disabled or * after returning from the handler if * it's already running. */ _enable_gpio_irqbank(bank, irq_mask, 0); if (!d->depth) { /* Level triggered interrupts * won't ever be reentered */ BUG_ON(level_mask & irq_mask); d->status |= IRQ_PENDING; } continue; } desc_handle_irq(gpio_irq, d); if (unlikely((d->status & IRQ_PENDING) && !d->depth)) { irq_mask = 1 << (gpio_irq - bank->virtual_irq_start); d->status &= ~IRQ_PENDING; _enable_gpio_irqbank(bank, irq_mask, 1); retrigger |= irq_mask; } } if (cpu_class_is_omap2()) { /* clear level sensitive interrupts after handler(s) */ _enable_gpio_irqbank(bank, isr_saved & level_mask, 0); _clear_gpio_irqbank(bank, isr_saved & level_mask); _enable_gpio_irqbank(bank, isr_saved & level_mask, 1); } } /* if bank has any level sensitive GPIO pin interrupt configured, we must unmask the bank interrupt only after handler(s) are executed in order to avoid spurious bank interrupt */ if (!unmasked) desc->chip->unmask(irq); } static void gpio_irq_shutdown(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); _reset_gpio(bank, gpio); } static void gpio_ack_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); _clear_gpio_irqstatus(bank, gpio); } static void gpio_mask_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); } static void gpio_unmask_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; unsigned int gpio_idx = get_gpio_index(gpio); struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio_idx, 1); } static struct irq_chip gpio_irq_chip = { .name = "GPIO", .shutdown = gpio_irq_shutdown, .ack = gpio_ack_irq, .mask = gpio_mask_irq, .unmask = gpio_unmask_irq, .set_type = gpio_irq_type, .set_wake = gpio_wake_enable, }; /*---------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP1 /* MPUIO uses the always-on 32k clock */ static void mpuio_ack_irq(unsigned int irq) { /* The ISR is reset automatically, so do nothing here. */ } static void mpuio_mask_irq(unsigned int irq) { unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); } static void mpuio_unmask_irq(unsigned int irq) { unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 1); } static struct irq_chip mpuio_irq_chip = { .name = "MPUIO", .ack = mpuio_ack_irq, .mask = mpuio_mask_irq, .unmask = mpuio_unmask_irq, .set_type = gpio_irq_type, #ifdef CONFIG_ARCH_OMAP16XX /* REVISIT: assuming only 16xx supports MPUIO wake events */ .set_wake = gpio_wake_enable, #endif }; #define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) #ifdef CONFIG_ARCH_OMAP16XX #include static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg) { struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; spin_lock(&bank->lock); bank->saved_wakeup = __raw_readl(mask_reg); __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); spin_unlock(&bank->lock); return 0; } static int omap_mpuio_resume_early(struct platform_device *pdev) { struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; spin_lock(&bank->lock); __raw_writel(bank->saved_wakeup, mask_reg); spin_unlock(&bank->lock); return 0; } /* use platform_driver for this, now that there's no longer any * point to sys_device (other than not disturbing old code). */ static struct platform_driver omap_mpuio_driver = { .suspend_late = omap_mpuio_suspend_late, .resume_early = omap_mpuio_resume_early, .driver = { .name = "mpuio", }, }; static struct platform_device omap_mpuio_device = { .name = "mpuio", .id = -1, .dev = { .driver = &omap_mpuio_driver.driver, } /* could list the /proc/iomem resources */ }; static inline void mpuio_init(void) { platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]); if (platform_driver_register(&omap_mpuio_driver) == 0) (void) platform_device_register(&omap_mpuio_device); } #else static inline void mpuio_init(void) {} #endif /* 16xx */ #else extern struct irq_chip mpuio_irq_chip; #define bank_is_mpuio(bank) 0 static inline void mpuio_init(void) {} #endif /*---------------------------------------------------------------------*/ static int initialized; #if !defined(CONFIG_ARCH_OMAP3) static struct clk * gpio_ick; #endif #if defined(CONFIG_ARCH_OMAP2) static struct clk * gpio_fck; #endif #if defined(CONFIG_ARCH_OMAP2430) static struct clk * gpio5_ick; static struct clk * gpio5_fck; #endif #if defined(CONFIG_ARCH_OMAP3) static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS]; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; static int __init _omap_gpio_init(void) { int i; struct gpio_bank *bank; #if defined(CONFIG_ARCH_OMAP3) char clk_name[11]; #endif initialized = 1; #if defined(CONFIG_ARCH_OMAP1) if (cpu_is_omap15xx()) { gpio_ick = clk_get(NULL, "arm_gpio_ck"); if (IS_ERR(gpio_ick)) printk("Could not get arm_gpio_ck\n"); else clk_enable(gpio_ick); } #endif #if defined(CONFIG_ARCH_OMAP2) if (cpu_class_is_omap2()) { gpio_ick = clk_get(NULL, "gpios_ick"); if (IS_ERR(gpio_ick)) printk("Could not get gpios_ick\n"); else clk_enable(gpio_ick); gpio_fck = clk_get(NULL, "gpios_fck"); if (IS_ERR(gpio_fck)) printk("Could not get gpios_fck\n"); else clk_enable(gpio_fck); /* * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK */ #if defined(CONFIG_ARCH_OMAP2430) if (cpu_is_omap2430()) { gpio5_ick = clk_get(NULL, "gpio5_ick"); if (IS_ERR(gpio5_ick)) printk("Could not get gpio5_ick\n"); else clk_enable(gpio5_ick); gpio5_fck = clk_get(NULL, "gpio5_fck"); if (IS_ERR(gpio5_fck)) printk("Could not get gpio5_fck\n"); else clk_enable(gpio5_fck); } #endif } #endif #if defined(CONFIG_ARCH_OMAP3) if (cpu_is_omap34xx()) { for (i = 0; i < OMAP34XX_NR_GPIOS; i++) { sprintf(clk_name, "gpio%d_ick", i + 1); gpio_iclks[i] = clk_get(NULL, clk_name); if (IS_ERR(gpio_iclks[i])) printk(KERN_ERR "Could not get %s\n", clk_name); else clk_enable(gpio_iclks[i]); sprintf(clk_name, "gpio%d_fck", i + 1); gpio_fclks[i] = clk_get(NULL, clk_name); if (IS_ERR(gpio_fclks[i])) printk(KERN_ERR "Could not get %s\n", clk_name); else clk_enable(gpio_fclks[i]); } } #endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; gpio_bank = gpio_bank_1510; } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { u32 rev; gpio_bank_count = 5; gpio_bank = gpio_bank_1610; rev = omap_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) { printk(KERN_INFO "OMAP730 GPIO hardware\n"); gpio_bank_count = 7; gpio_bank = gpio_bank_730; } #endif #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { int rev; gpio_bank_count = 4; gpio_bank = gpio_bank_242x; rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } if (cpu_is_omap243x()) { int rev; gpio_bank_count = 5; gpio_bank = gpio_bank_243x; rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx()) { int rev; gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } #endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; bank = &gpio_bank[i]; bank->reserved_map = 0; bank->base = IO_ADDRESS(bank->base); spin_lock_init(&bank->lock); if (bank_is_mpuio(bank)) omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); } if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) { __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); gpio_count = 32; /* 730 has 32-bit GPIOs */ } #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) { static const u32 non_wakeup_gpios[] = { 0xe203ffc0, 0x08700040 }; __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); if (i < ARRAY_SIZE(non_wakeup_gpios)) bank->non_wakeup_gpios = non_wakeup_gpios[i]; gpio_count = 32; } #endif for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); set_irq_chip_data(j, bank); if (bank_is_mpuio(bank)) set_irq_chip(j, &mpuio_irq_chip); else set_irq_chip(j, &gpio_irq_chip); set_irq_handler(j, handle_simple_irq); set_irq_flags(j, IRQF_VALID); } set_irq_chained_handler(bank->irq, gpio_irq_handler); set_irq_data(bank->irq, bank); } /* Enable system clock for GPIO module. * The CAM_CLK_CTRL *is* really the right place. */ if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); /* Enable autoidle for the OCP interface */ if (cpu_is_omap24xx()) omap_writel(1 << 0, 0x48019010); if (cpu_is_omap34xx()) omap_writel(1 << 0, 0x48306814); return 0; } #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) { int i; if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) return 0; for (i = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; void __iomem *wake_status; void __iomem *wake_clear; void __iomem *wake_set; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; #endif default: continue; } spin_lock(&bank->lock); bank->saved_wakeup = __raw_readl(wake_status); __raw_writel(0xffffffff, wake_clear); __raw_writel(bank->suspend_wakeup, wake_set); spin_unlock(&bank->lock); } return 0; } static int omap_gpio_resume(struct sys_device *dev) { int i; if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) return 0; for (i = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; void __iomem *wake_clear; void __iomem *wake_set; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX case METHOD_GPIO_1610: wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; #endif default: continue; } spin_lock(&bank->lock); __raw_writel(0xffffffff, wake_clear); __raw_writel(bank->saved_wakeup, wake_set); spin_unlock(&bank->lock); } return 0; } static struct sysdev_class omap_gpio_sysclass = { .name = "gpio", .suspend = omap_gpio_suspend, .resume = omap_gpio_resume, }; static struct sys_device omap_gpio_device = { .id = 0, .cls = &omap_gpio_sysclass, }; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static int workaround_enabled; void omap2_gpio_prepare_for_retention(void) { int i, c = 0; /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious * IRQs will be generated. See OMAP2420 Errata item 1.101. */ for (i = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l1, l2; if (!(bank->enabled_non_wakeup_gpios)) continue; #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif bank->saved_fallingdetect = l1; bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif c++; } if (!c) { workaround_enabled = 0; return; } workaround_enabled = 1; } void omap2_gpio_resume_after_retention(void) { int i; if (!workaround_enabled) return; for (i = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l; if (!(bank->enabled_non_wakeup_gpios)) continue; #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif /* Check if any of the non-wakeup interrupt GPIOs have changed * state. If so, generate an IRQ by software. This is * horribly racy, but it's the best we can do to work around * this silicon bug. */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); #endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; if (l) { u32 old0, old1; #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1); #endif } } } #endif /* * This may get called early from board specific init * for boards that have interrupts routed via FPGA. */ int __init omap_gpio_init(void) { if (!initialized) return _omap_gpio_init(); else return 0; } static int __init omap_gpio_sysinit(void) { int ret = 0; if (!initialized) ret = _omap_gpio_init(); mpuio_init(); #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (cpu_is_omap16xx() || cpu_class_is_omap2()) { if (ret == 0) { ret = sysdev_class_register(&omap_gpio_sysclass); if (ret == 0) ret = sysdev_register(&omap_gpio_device); } } #endif return ret; } EXPORT_SYMBOL(omap_request_gpio); EXPORT_SYMBOL(omap_free_gpio); EXPORT_SYMBOL(omap_set_gpio_direction); EXPORT_SYMBOL(omap_set_gpio_dataout); EXPORT_SYMBOL(omap_get_gpio_datain); arch_initcall(omap_gpio_sysinit); #ifdef CONFIG_DEBUG_FS #include #include static int gpio_is_input(struct gpio_bank *bank, int mask) { void __iomem *reg = bank->base; switch (bank->method) { case METHOD_MPUIO: reg += OMAP_MPUIO_IO_CNTL; break; case METHOD_GPIO_1510: reg += OMAP1510_GPIO_DIR_CONTROL; break; case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; } return __raw_readl(reg) & mask; } static int dbg_gpio_show(struct seq_file *s, void *unused) { unsigned i, j, gpio; for (i = 0, gpio = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = gpio_bank + i; unsigned bankwidth = 16; u32 mask = 1; if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); else if (cpu_class_is_omap2() || cpu_is_omap730()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { unsigned irq, value, is_in, irqstat; if (!(bank->reserved_map & mask)) continue; irq = bank->virtual_irq_start + j; value = omap_get_gpio_datain(gpio); is_in = gpio_is_input(bank, mask); if (bank_is_mpuio(bank)) seq_printf(s, "MPUIO %2d: ", j); else seq_printf(s, "GPIO %3d: ", gpio); seq_printf(s, "%s %s", is_in ? "in " : "out", value ? "hi" : "lo"); irqstat = irq_desc[irq].status; if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { char *trigger = NULL; switch (irqstat & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_EDGE_FALLING: trigger = "falling"; break; case IRQ_TYPE_EDGE_RISING: trigger = "rising"; break; case IRQ_TYPE_EDGE_BOTH: trigger = "bothedge"; break; case IRQ_TYPE_LEVEL_LOW: trigger = "low"; break; case IRQ_TYPE_LEVEL_HIGH: trigger = "high"; break; case IRQ_TYPE_NONE: trigger = "(unspecified)"; break; } seq_printf(s, ", irq-%d %s%s", irq, trigger, (bank->suspend_wakeup & mask) ? " wakeup" : ""); } seq_printf(s, "\n"); } if (bank_is_mpuio(bank)) { seq_printf(s, "\n"); gpio = 0; } } return 0; } static int dbg_gpio_open(struct inode *inode, struct file *file) { return single_open(file, dbg_gpio_show, &inode->i_private); } static const struct file_operations debug_fops = { .open = dbg_gpio_open, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; static int __init omap_gpio_debuginit(void) { (void) debugfs_create_file("omap_gpio", S_IRUGO, NULL, NULL, &debug_fops); return 0; } late_initcall(omap_gpio_debuginit); #endif