/******************************************************************************* * * Module Name: utmisc - common utility procedures * ******************************************************************************/ /* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utmisc") /******************************************************************************* * * FUNCTION: acpi_ut_allocate_owner_id * * PARAMETERS: owner_id - Where the new owner ID is returned * * RETURN: Status * * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to * track objects created by the table or method, to be deleted * when the method exits or the table is unloaded. * ******************************************************************************/ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) { acpi_native_uint i; acpi_status status; ACPI_FUNCTION_TRACE("ut_allocate_owner_id"); /* Guard against multiple allocations of ID to the same location */ if (*owner_id) { ACPI_REPORT_ERROR(("Owner ID [%2.2X] already exists\n", *owner_id)); return_ACPI_STATUS(AE_ALREADY_EXISTS); } /* Mutex for the global ID mask */ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Find a free owner ID */ for (i = 0; i < 32; i++) { if (!(acpi_gbl_owner_id_mask & (1 << i))) { ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "Current owner_id mask: %8.8X New ID: %2.2X\n", acpi_gbl_owner_id_mask, (unsigned int)(i + 1))); acpi_gbl_owner_id_mask |= (1 << i); *owner_id = (acpi_owner_id) (i + 1); goto exit; } } /* * If we are here, all owner_ids have been allocated. This probably should * not happen since the IDs are reused after deallocation. The IDs are * allocated upon table load (one per table) and method execution, and * they are released when a table is unloaded or a method completes * execution. */ *owner_id = 0; status = AE_OWNER_ID_LIMIT; ACPI_REPORT_ERROR(("Could not allocate new owner_id (32 max), AE_OWNER_ID_LIMIT\n")); exit: (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ut_release_owner_id * * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_iD * * RETURN: None. No error is returned because we are either exiting a * control method or unloading a table. Either way, we would * ignore any error anyway. * * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 32 * ******************************************************************************/ void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr) { acpi_owner_id owner_id = *owner_id_ptr; acpi_status status; ACPI_FUNCTION_TRACE_U32("ut_release_owner_id", owner_id); /* Always clear the input owner_id (zero is an invalid ID) */ *owner_id_ptr = 0; /* Zero is not a valid owner_iD */ if ((owner_id == 0) || (owner_id > 32)) { ACPI_REPORT_ERROR(("Invalid owner_id: %2.2X\n", owner_id)); return_VOID; } /* Mutex for the global ID mask */ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES); if (ACPI_FAILURE(status)) { return_VOID; } /* Normalize the ID to zero */ owner_id--; /* Free the owner ID only if it is valid */ if (acpi_gbl_owner_id_mask & (1 << owner_id)) { acpi_gbl_owner_id_mask ^= (1 << owner_id); } (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); return_VOID; } /******************************************************************************* * * FUNCTION: acpi_ut_strupr (strupr) * * PARAMETERS: src_string - The source string to convert * * RETURN: None * * DESCRIPTION: Convert string to uppercase * * NOTE: This is not a POSIX function, so it appears here, not in utclib.c * ******************************************************************************/ void acpi_ut_strupr(char *src_string) { char *string; ACPI_FUNCTION_ENTRY(); if (!src_string) { return; } /* Walk entire string, uppercasing the letters */ for (string = src_string; *string; string++) { *string = (char)ACPI_TOUPPER(*string); } return; } /******************************************************************************* * * FUNCTION: acpi_ut_print_string * * PARAMETERS: String - Null terminated ASCII string * max_length - Maximum output length * * RETURN: None * * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape * sequences. * ******************************************************************************/ void acpi_ut_print_string(char *string, u8 max_length) { u32 i; if (!string) { acpi_os_printf("<\"NULL STRING PTR\">"); return; } acpi_os_printf("\""); for (i = 0; string[i] && (i < max_length); i++) { /* Escape sequences */ switch (string[i]) { case 0x07: acpi_os_printf("\\a"); /* BELL */ break; case 0x08: acpi_os_printf("\\b"); /* BACKSPACE */ break; case 0x0C: acpi_os_printf("\\f"); /* FORMFEED */ break; case 0x0A: acpi_os_printf("\\n"); /* LINEFEED */ break; case 0x0D: acpi_os_printf("\\r"); /* CARRIAGE RETURN */ break; case 0x09: acpi_os_printf("\\t"); /* HORIZONTAL TAB */ break; case 0x0B: acpi_os_printf("\\v"); /* VERTICAL TAB */ break; case '\'': /* Single Quote */ case '\"': /* Double Quote */ case '\\': /* Backslash */ acpi_os_printf("\\%c", (int)string[i]); break; default: /* Check for printable character or hex escape */ if (ACPI_IS_PRINT(string[i])) { /* This is a normal character */ acpi_os_printf("%c", (int)string[i]); } else { /* All others will be Hex escapes */ acpi_os_printf("\\x%2.2X", (s32) string[i]); } break; } } acpi_os_printf("\""); if (i == max_length && string[i]) { acpi_os_printf("..."); } } /******************************************************************************* * * FUNCTION: acpi_ut_dword_byte_swap * * PARAMETERS: Value - Value to be converted * * RETURN: u32 integer with bytes swapped * * DESCRIPTION: Convert a 32-bit value to big-endian (swap the bytes) * ******************************************************************************/ u32 acpi_ut_dword_byte_swap(u32 value) { union { u32 value; u8 bytes[4]; } out; union { u32 value; u8 bytes[4]; } in; ACPI_FUNCTION_ENTRY(); in.value = value; out.bytes[0] = in.bytes[3]; out.bytes[1] = in.bytes[2]; out.bytes[2] = in.bytes[1]; out.bytes[3] = in.bytes[0]; return (out.value); } /******************************************************************************* * * FUNCTION: acpi_ut_set_integer_width * * PARAMETERS: Revision From DSDT header * * RETURN: None * * DESCRIPTION: Set the global integer bit width based upon the revision * of the DSDT. For Revision 1 and 0, Integers are 32 bits. * For Revision 2 and above, Integers are 64 bits. Yes, this * makes a difference. * ******************************************************************************/ void acpi_ut_set_integer_width(u8 revision) { if (revision <= 1) { acpi_gbl_integer_bit_width = 32; acpi_gbl_integer_nybble_width = 8; acpi_gbl_integer_byte_width = 4; } else { acpi_gbl_integer_bit_width = 64; acpi_gbl_integer_nybble_width = 16; acpi_gbl_integer_byte_width = 8; } } #ifdef ACPI_DEBUG_OUTPUT /******************************************************************************* * * FUNCTION: acpi_ut_display_init_pathname * * PARAMETERS: Type - Object type of the node * obj_handle - Handle whose pathname will be displayed * Path - Additional path string to be appended. * (NULL if no extra path) * * RETURN: acpi_status * * DESCRIPTION: Display full pathname of an object, DEBUG ONLY * ******************************************************************************/ void acpi_ut_display_init_pathname(u8 type, struct acpi_namespace_node *obj_handle, char *path) { acpi_status status; struct acpi_buffer buffer; ACPI_FUNCTION_ENTRY(); /* Only print the path if the appropriate debug level is enabled */ if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) { return; } /* Get the full pathname to the node */ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; status = acpi_ns_handle_to_pathname(obj_handle, &buffer); if (ACPI_FAILURE(status)) { return; } /* Print what we're doing */ switch (type) { case ACPI_TYPE_METHOD: acpi_os_printf("Executing "); break; default: acpi_os_printf("Initializing "); break; } /* Print the object type and pathname */ acpi_os_printf("%-12s %s", acpi_ut_get_type_name(type), (char *)buffer.pointer); /* Extra path is used to append names like _STA, _INI, etc. */ if (path) { acpi_os_printf(".%s", path); } acpi_os_printf("\n"); ACPI_MEM_FREE(buffer.pointer); } #endif /******************************************************************************* * * FUNCTION: acpi_ut_valid_acpi_name * * PARAMETERS: Name - The name to be examined * * RETURN: TRUE if the name is valid, FALSE otherwise * * DESCRIPTION: Check for a valid ACPI name. Each character must be one of: * 1) Upper case alpha * 2) numeric * 3) underscore * ******************************************************************************/ u8 acpi_ut_valid_acpi_name(u32 name) { char *name_ptr = (char *)&name; char character; acpi_native_uint i; ACPI_FUNCTION_ENTRY(); for (i = 0; i < ACPI_NAME_SIZE; i++) { character = *name_ptr; name_ptr++; if (!((character == '_') || (character >= 'A' && character <= 'Z') || (character >= '0' && character <= '9'))) { return (FALSE); } } return (TRUE); } /******************************************************************************* * * FUNCTION: acpi_ut_valid_acpi_character * * PARAMETERS: Character - The character to be examined * * RETURN: 1 if Character may appear in a name, else 0 * * DESCRIPTION: Check for a printable character * ******************************************************************************/ u8 acpi_ut_valid_acpi_character(char character) { ACPI_FUNCTION_ENTRY(); return ((u8) ((character == '_') || (character >= 'A' && character <= 'Z') || (character >= '0' && character <= '9'))); } /******************************************************************************* * * FUNCTION: acpi_ut_strtoul64 * * PARAMETERS: String - Null terminated string * Base - Radix of the string: 10, 16, or ACPI_ANY_BASE * ret_integer - Where the converted integer is returned * * RETURN: Status and Converted value * * DESCRIPTION: Convert a string into an unsigned value. * NOTE: Does not support Octal strings, not needed. * ******************************************************************************/ acpi_status acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer) { u32 this_digit = 0; acpi_integer return_value = 0; acpi_integer quotient; ACPI_FUNCTION_TRACE("ut_stroul64"); if ((!string) || !(*string)) { goto error_exit; } switch (base) { case ACPI_ANY_BASE: case 10: case 16: break; default: /* Invalid Base */ return_ACPI_STATUS(AE_BAD_PARAMETER); } /* Skip over any white space in the buffer */ while (ACPI_IS_SPACE(*string) || *string == '\t') { string++; } /* * If the input parameter Base is zero, then we need to * determine if it is decimal or hexadecimal: */ if (base == 0) { if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) { base = 16; string += 2; } else { base = 10; } } /* * For hexadecimal base, skip over the leading * 0 or 0x, if they are present. */ if ((base == 16) && (*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) { string += 2; } /* Any string left? */ if (!(*string)) { goto error_exit; } /* Main loop: convert the string to a 64-bit integer */ while (*string) { if (ACPI_IS_DIGIT(*string)) { /* Convert ASCII 0-9 to Decimal value */ this_digit = ((u8) * string) - '0'; } else { if (base == 10) { /* Digit is out of range */ goto error_exit; } this_digit = (u8) ACPI_TOUPPER(*string); if (ACPI_IS_XDIGIT((char)this_digit)) { /* Convert ASCII Hex char to value */ this_digit = this_digit - 'A' + 10; } else { /* * We allow non-hex chars, just stop now, same as end-of-string. * See ACPI spec, string-to-integer conversion. */ break; } } /* Divide the digit into the correct position */ (void) acpi_ut_short_divide((ACPI_INTEGER_MAX - (acpi_integer) this_digit), base, "ient, NULL); if (return_value > quotient) { goto error_exit; } return_value *= base; return_value += this_digit; string++; } /* All done, normal exit */ *ret_integer = return_value; return_ACPI_STATUS(AE_OK); error_exit: /* Base was set/validated above */ if (base == 10) { return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT); } else { return_ACPI_STATUS(AE_BAD_HEX_CONSTANT); } } /******************************************************************************* * * FUNCTION: acpi_ut_create_update_state_and_push * * PARAMETERS: Object - Object to be added to the new state * Action - Increment/Decrement * state_list - List the state will be added to * * RETURN: Status * * DESCRIPTION: Create a new state and push it * ******************************************************************************/ acpi_status acpi_ut_create_update_state_and_push(union acpi_operand_object *object, u16 action, union acpi_generic_state **state_list) { union acpi_generic_state *state; ACPI_FUNCTION_ENTRY(); /* Ignore null objects; these are expected */ if (!object) { return (AE_OK); } state = acpi_ut_create_update_state(object, action); if (!state) { return (AE_NO_MEMORY); } acpi_ut_push_generic_state(state_list, state); return (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ut_walk_package_tree * * PARAMETERS: source_object - The package to walk * target_object - Target object (if package is being copied) * walk_callback - Called once for each package element * Context - Passed to the callback function * * RETURN: Status * * DESCRIPTION: Walk through a package * ******************************************************************************/ acpi_status acpi_ut_walk_package_tree(union acpi_operand_object * source_object, void *target_object, acpi_pkg_callback walk_callback, void *context) { acpi_status status = AE_OK; union acpi_generic_state *state_list = NULL; union acpi_generic_state *state; u32 this_index; union acpi_operand_object *this_source_obj; ACPI_FUNCTION_TRACE("ut_walk_package_tree"); state = acpi_ut_create_pkg_state(source_object, target_object, 0); if (!state) { return_ACPI_STATUS(AE_NO_MEMORY); } while (state) { /* Get one element of the package */ this_index = state->pkg.index; this_source_obj = (union acpi_operand_object *) state->pkg.source_object->package.elements[this_index]; /* * Check for: * 1) An uninitialized package element. It is completely * legal to declare a package and leave it uninitialized * 2) Not an internal object - can be a namespace node instead * 3) Any type other than a package. Packages are handled in else * case below. */ if ((!this_source_obj) || (ACPI_GET_DESCRIPTOR_TYPE(this_source_obj) != ACPI_DESC_TYPE_OPERAND) || (ACPI_GET_OBJECT_TYPE(this_source_obj) != ACPI_TYPE_PACKAGE)) { status = walk_callback(ACPI_COPY_TYPE_SIMPLE, this_source_obj, state, context); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } state->pkg.index++; while (state->pkg.index >= state->pkg.source_object->package.count) { /* * We've handled all of the objects at this level, This means * that we have just completed a package. That package may * have contained one or more packages itself. * * Delete this state and pop the previous state (package). */ acpi_ut_delete_generic_state(state); state = acpi_ut_pop_generic_state(&state_list); /* Finished when there are no more states */ if (!state) { /* * We have handled all of the objects in the top level * package just add the length of the package objects * and exit */ return_ACPI_STATUS(AE_OK); } /* * Go back up a level and move the index past the just * completed package object. */ state->pkg.index++; } } else { /* This is a subobject of type package */ status = walk_callback(ACPI_COPY_TYPE_PACKAGE, this_source_obj, state, context); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* * Push the current state and create a new one * The callback above returned a new target package object. */ acpi_ut_push_generic_state(&state_list, state); state = acpi_ut_create_pkg_state(this_source_obj, state->pkg. this_target_obj, 0); if (!state) { return_ACPI_STATUS(AE_NO_MEMORY); } } } /* We should never get here */ return_ACPI_STATUS(AE_AML_INTERNAL); } /******************************************************************************* * * FUNCTION: acpi_ut_generate_checksum * * PARAMETERS: Buffer - Buffer to be scanned * Length - number of bytes to examine * * RETURN: The generated checksum * * DESCRIPTION: Generate a checksum on a raw buffer * ******************************************************************************/ u8 acpi_ut_generate_checksum(u8 * buffer, u32 length) { u32 i; signed char sum = 0; for (i = 0; i < length; i++) { sum = (signed char)(sum + buffer[i]); } return ((u8) (0 - sum)); } /******************************************************************************* * * FUNCTION: acpi_ut_get_resource_end_tag * * PARAMETERS: obj_desc - The resource template buffer object * * RETURN: Pointer to the end tag * * DESCRIPTION: Find the END_TAG resource descriptor in a resource template * ******************************************************************************/ u8 *acpi_ut_get_resource_end_tag(union acpi_operand_object * obj_desc) { u8 buffer_byte; u8 *buffer; u8 *end_buffer; buffer = obj_desc->buffer.pointer; end_buffer = buffer + obj_desc->buffer.length; while (buffer < end_buffer) { buffer_byte = *buffer; if (buffer_byte & ACPI_RDESC_TYPE_LARGE) { /* Large Descriptor - Length is next 2 bytes */ buffer += ((*(buffer + 1) | (*(buffer + 2) << 8)) + 3); } else { /* Small Descriptor. End Tag will be found here */ if ((buffer_byte & ACPI_RDESC_SMALL_MASK) == ACPI_RDESC_TYPE_END_TAG) { /* Found the end tag descriptor, all done. */ return (buffer); } /* Length is in the header */ buffer += ((buffer_byte & 0x07) + 1); } } /* End tag not found */ return (NULL); } /******************************************************************************* * * FUNCTION: acpi_ut_report_error * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) * component_id - Caller's component ID (for error output) * * RETURN: None * * DESCRIPTION: Print error message * ******************************************************************************/ void acpi_ut_report_error(char *module_name, u32 line_number, u32 component_id) { acpi_os_printf("%8s-%04d: *** Error: ", module_name, line_number); } /******************************************************************************* * * FUNCTION: acpi_ut_report_warning * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) * component_id - Caller's component ID (for error output) * * RETURN: None * * DESCRIPTION: Print warning message * ******************************************************************************/ void acpi_ut_report_warning(char *module_name, u32 line_number, u32 component_id) { acpi_os_printf("%8s-%04d: *** Warning: ", module_name, line_number); } /******************************************************************************* * * FUNCTION: acpi_ut_report_info * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) * component_id - Caller's component ID (for error output) * * RETURN: None * * DESCRIPTION: Print information message * ******************************************************************************/ void acpi_ut_report_info(char *module_name, u32 line_number, u32 component_id) { acpi_os_printf("%8s-%04d: *** Info: ", module_name, line_number); }