1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
|
/*
* arch/arm/mach-ixp4xx/fsg-setup.c
*
* FSG board-setup
*
* Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
*
* based on ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
* based on nslu2-power.c
* Copyright (C) 2005 Tower Technologies
*
* Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*
*/
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
#include <linux/reboot.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/gpio.h>
static struct flash_platform_data fsg_flash_data = {
.map_name = "cfi_probe",
.width = 2,
};
static struct resource fsg_flash_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device fsg_flash = {
.name = "IXP4XX-Flash",
.id = 0,
.dev = {
.platform_data = &fsg_flash_data,
},
.num_resources = 1,
.resource = &fsg_flash_resource,
};
static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
.sda_pin = FSG_SDA_PIN,
.scl_pin = FSG_SCL_PIN,
};
static struct platform_device fsg_i2c_gpio = {
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = &fsg_i2c_gpio_data,
},
};
static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
{
I2C_BOARD_INFO("isl1208", 0x6f),
},
};
static struct resource fsg_uart_resources[] = {
{
.start = IXP4XX_UART1_BASE_PHYS,
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
},
{
.start = IXP4XX_UART2_BASE_PHYS,
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
}
};
static struct plat_serial8250_port fsg_uart_data[] = {
{
.mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{ }
};
static struct platform_device fsg_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = fsg_uart_data,
},
.num_resources = ARRAY_SIZE(fsg_uart_resources),
.resource = fsg_uart_resources,
};
static struct platform_device fsg_leds = {
.name = "fsg-led",
.id = -1,
};
/* Built-in 10/100 Ethernet MAC interfaces */
static struct eth_plat_info fsg_plat_eth[] = {
{
.phy = 5,
.rxq = 3,
.txreadyq = 20,
}, {
.phy = 4,
.rxq = 4,
.txreadyq = 21,
}
};
static struct platform_device fsg_eth[] = {
{
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev = {
.platform_data = fsg_plat_eth,
},
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev = {
.platform_data = fsg_plat_eth + 1,
},
}
};
static struct platform_device *fsg_devices[] __initdata = {
&fsg_i2c_gpio,
&fsg_flash,
&fsg_leds,
&fsg_eth[0],
&fsg_eth[1],
};
static irqreturn_t fsg_power_handler(int irq, void *dev_id)
{
/* Signal init to do the ctrlaltdel action, this will bypass init if
* it hasn't started and do a kernel_restart.
*/
ctrl_alt_del();
return IRQ_HANDLED;
}
static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
{
/* This is the paper-clip reset which does an emergency reboot. */
printk(KERN_INFO "Restarting system.\n");
machine_restart(NULL);
/* This should never be reached. */
return IRQ_HANDLED;
}
static void __init fsg_init(void)
{
DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
ixp4xx_sys_init();
fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
fsg_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
/* Configure CS2 for operation, 8bit and writable */
*IXP4XX_EXP_CS2 = 0xbfff0002;
i2c_register_board_info(0, fsg_i2c_board_info,
ARRAY_SIZE(fsg_i2c_board_info));
/* This is only useful on a modified machine, but it is valuable
* to have it first in order to see debug messages, and so that
* it does *not* get removed if platform_add_devices fails!
*/
(void)platform_device_register(&fsg_uart);
platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
IRQF_DISABLED | IRQF_TRIGGER_LOW,
"FSG reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
gpio_to_irq(FSG_RB_GPIO));
}
if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
IRQF_DISABLED | IRQF_TRIGGER_LOW,
"FSG power button", NULL) < 0) {
printk(KERN_DEBUG "Power Button IRQ %d not available\n",
gpio_to_irq(FSG_SB_GPIO));
}
/*
* Map in a portion of the flash and read the MAC addresses.
* Since it is stored in BE in the flash itself, we need to
* byteswap it if we're in LE mode.
*/
f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
if (f) {
#ifdef __ARMEB__
int i;
for (i = 0; i < 6; i++) {
fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
}
#else
/*
Endian-swapped reads from unaligned addresses are
required to extract the two MACs from the big-endian
Redboot config area in flash.
*/
fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
#endif
iounmap(f);
}
printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
}
MACHINE_START(FSG, "Freecom FSG-3")
/* Maintainer: www.nslu2-linux.org */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = fsg_init,
MACHINE_END
|
