1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
|
/*
* Copyright (C) ST-Ericsson SA 2011
*
* Battery temperature driver for ab5500
*
* License Terms: GNU General Public License v2
* Authors:
* Johan Palsson <johan.palsson@stericsson.com>
* Karl Komierowski <karl.komierowski@stericsson.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/completion.h>
#include <linux/workqueue.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab5500-bm.h>
#include <linux/mfd/abx500/ab5500-gpadc.h>
#define BTEMP_THERMAL_LOW_LIMIT -10
#define BTEMP_THERMAL_MED_LIMIT 0
#define BTEMP_THERMAL_HIGH_LIMIT_62 62
#define BTEMP_BATCTRL_CURR_SRC_7UA 7
#define BTEMP_BATCTRL_CURR_SRC_15UA 15
#define BTEMP_BATCTRL_CURR_SRC_20UA 20
#define UART_MODE 0x0F
#define BAT_CUR_SRC 0x1F
#define RESIS_ID_MODE 0x03
#define RESET 0x00
#define ADOUT_10K_PULL_UP 0x07
#define to_ab5500_btemp_device_info(x) container_of((x), \
struct ab5500_btemp, btemp_psy);
/**
* struct ab5500_btemp_interrupts - ab5500 interrupts
* @name: name of the interrupt
* @isr function pointer to the isr
*/
struct ab5500_btemp_interrupts {
char *name;
irqreturn_t (*isr)(int irq, void *data);
};
struct ab5500_btemp_events {
bool batt_rem;
bool usb_conn;
};
/**
* struct ab5500_btemp - ab5500 BTEMP device information
* @dev: Pointer to the structure device
* @chip_id: Chip-Id of the AB5500
* @curr_source: What current source we use, in uA
* @bat_temp: Battery temperature in degree Celcius
* @prev_bat_temp Last dispatched battery temperature
* @node: struct of type list_head
* @parent: Pointer to the struct ab5500
* @gpadc: Pointer to the struct gpadc
* @gpadc-auto: Pointer to the struct adc_auto_input
* @pdata: Pointer to the ab5500_btemp platform data
* @bat: Pointer to the ab5500_bm platform data
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
* @btemp_wq: Work queue for measuring the temperature periodically
* @btemp_periodic_work: Work for measuring the temperature periodically
*/
struct ab5500_btemp {
struct device *dev;
u8 chip_id;
int curr_source;
int bat_temp;
int prev_bat_temp;
struct list_head node;
struct ab5500 *parent;
struct ab5500_gpadc *gpadc;
struct adc_auto_input *gpadc_auto;
struct abx500_btemp_platform_data *pdata;
struct abx500_bm_data *bat;
struct power_supply btemp_psy;
struct ab5500_btemp_events events;
struct workqueue_struct *btemp_wq;
struct delayed_work btemp_periodic_work;
};
/* BTEMP power supply properties */
static enum power_supply_property ab5500_btemp_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_TEMP,
};
static LIST_HEAD(ab5500_btemp_list);
struct ab5500_btemp *ab5500_btemp_get(void)
{
struct ab5500_btemp *di;
di = list_first_entry(&ab5500_btemp_list, struct ab5500_btemp, node);
return di;
}
/**
* ab5500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
* @di: pointer to the ab5500_btemp structure
* @v_batctrl: measured batctrl voltage
*
* This function returns the battery resistance that is
* derived from the BATCTRL voltage.
* Returns value in Ohms.
*/
static int ab5500_btemp_batctrl_volt_to_res(struct ab5500_btemp *di,
int v_batctrl)
{
int rbs;
if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) {
/*
* If the battery has internal NTC, we use the current
* source to calculate the resistance, 7uA or 20uA
*/
rbs = v_batctrl * 1000 / di->curr_source;
} else {
/*
* BAT_CTRL is internally
* connected to 1.8V through a 10k resistor
*/
rbs = (10000 * (v_batctrl)) / (1800 - v_batctrl);
}
return rbs;
}
/**
* ab5500_btemp_read_batctrl_voltage() - measure batctrl voltage
* @di: pointer to the ab5500_btemp structure
*
* This function returns the voltage on BATCTRL. Returns value in mV.
*/
static int ab5500_btemp_read_batctrl_voltage(struct ab5500_btemp *di)
{
int vbtemp;
static int prev;
vbtemp = ab5500_gpadc_convert(di->gpadc, BAT_CTRL);
if (vbtemp < 0) {
dev_err(di->dev,
"%s gpadc conversion failed, using previous value",
__func__);
return prev;
}
prev = vbtemp;
return vbtemp;
}
/**
* ab5500_btemp_curr_source_enable() - enable/disable batctrl current source
* @di: pointer to the ab5500_btemp structure
* @enable: enable or disable the current source
*
* Enable or disable the current sources for the BatCtrl AD channel
*/
static int ab5500_btemp_curr_source_enable(struct ab5500_btemp *di,
bool enable)
{
int ret = 0;
/* Only do this for batteries with internal NTC */
if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB5500_BANK_FG_BATTCOM_ACC, AB5500_UART,
UART_MODE, RESIS_ID_MODE);
if (ret) {
dev_err(di->dev,
"%s failed setting resistance identification mode\n",
__func__);
return ret;
}
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB5500_BANK_FG_BATTCOM_ACC, AB5500_URI,
BAT_CUR_SRC, BAT_CTRL_15U_ENA);
if (ret) {
dev_err(di->dev, "%s failed enabling current source\n",
__func__);
goto disable_curr_source;
}
} else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
dev_dbg(di->dev, "Disable BATCTRL curr source\n");
/* Write 0 to the curr bits */
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB5500_BANK_FG_BATTCOM_ACC, AB5500_URI,
BAT_CUR_SRC, RESET);
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
goto disable_curr_source;
}
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB5500_BANK_FG_BATTCOM_ACC, AB5500_UART,
UART_MODE, RESET);
if (ret) {
dev_err(di->dev, "%s failed disabling force comp\n",
__func__);
}
}
return ret;
disable_curr_source:
/* Write 0 to the curr bits */
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB5500_BANK_FG_BATTCOM_ACC, AB5500_URI,
BAT_CUR_SRC, RESET);
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
}
return ret;
}
/**
* ab5500_btemp_get_batctrl_res() - get battery resistance
* @di: pointer to the ab5500_btemp structure
*
* This function returns the battery pack identification resistance.
* Returns value in Ohms.
*/
static int ab5500_btemp_get_batctrl_res(struct ab5500_btemp *di)
{
int ret;
int batctrl;
int res;
ret = ab5500_btemp_curr_source_enable(di, true);
/* TODO: This delay has to be optimised */
mdelay(1000);
if (ret) {
dev_err(di->dev, "%s curr source enable failed\n", __func__);
return ret;
}
batctrl = ab5500_btemp_read_batctrl_voltage(di);
res = ab5500_btemp_batctrl_volt_to_res(di, batctrl);
ret = ab5500_btemp_curr_source_enable(di, false);
if (ret) {
dev_err(di->dev, "%s curr source disable failed\n", __func__);
return ret;
}
dev_dbg(di->dev, "%s batctrl: %d res: %d ",
__func__, batctrl, res);
return res;
}
/**
* ab5500_btemp_res_to_temp() - resistance to temperature
* @di: pointer to the ab5500_btemp structure
* @tbl: pointer to the resiatance to temperature table
* @tbl_size: size of the resistance to temperature table
* @res: resistance to calculate the temperature from
*
* This function returns the battery temperature in degrees Celcius
* based on the NTC resistance.
*/
static int ab5500_btemp_res_to_temp(struct ab5500_btemp *di,
const struct abx500_res_to_temp *tbl, int tbl_size, int res)
{
int i, temp;
/*
* Calculate the formula for the straight line
* Simple interpolation if we are within
* the resistance table limits, extrapolate
* if resistance is outside the limits.
*/
if (res > tbl[0].resist)
i = 0;
else if (res <= tbl[tbl_size - 1].resist)
i = tbl_size - 2;
else {
i = 0;
while (!(res <= tbl[i].resist &&
res > tbl[i + 1].resist))
i++;
}
temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) *
(res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
return temp;
}
/**
* ab5500_btemp_measure_temp() - measure battery temperature
* @di: pointer to the ab5500_btemp structure
*
* Returns battery temperature (on success) else the previous temperature
*/
static int ab5500_btemp_measure_temp(struct ab5500_btemp *di)
{
int temp, ret;
static int prev;
int rbat, vntc;
int rntc = 0;
u8 id;
id = di->bat->batt_id;
if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
id != BATTERY_UNKNOWN) {
rbat = ab5500_btemp_get_batctrl_res(di);
if (rbat < 0) {
dev_err(di->dev, "%s get batctrl res failed\n",
__func__);
/*
* Return out-of-range temperature so that
* charging is stopped
*/
return BTEMP_THERMAL_LOW_LIMIT;
}
temp = ab5500_btemp_res_to_temp(di,
di->bat->bat_type[id].r_to_t_tbl,
di->bat->bat_type[id].n_temp_tbl_elements, rbat);
} else {
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB5500_BANK_FG_BATTCOM_ACC, AB5500_UART,
UART_MODE, ADOUT_10K_PULL_UP);
if (ret) {
dev_err(di->dev,
"failed to enable 10k pull up to Vadout\n");
}
vntc = ab5500_gpadc_convert(di->gpadc, BTEMP_BALL);
if (vntc < 0) {
dev_err(di->dev,
"%s gpadc conversion failed,"
" using previous value\n", __func__);
return prev;
}
/*
* The PCB NTC is sourced from 2.75v via a 10kOhm
* resistor.
*/
rntc = 10000 * vntc / (27500 - vntc);
temp = ab5500_btemp_res_to_temp(di,
di->bat->bat_type[id].r_to_t_tbl,
di->bat->bat_type[id].n_temp_tbl_elements, rntc);
prev = temp;
}
dev_dbg(di->dev, "Battery temperature is %d\n", temp);
return temp;
}
/**
* ab5500_btemp_id() - Identify the connected battery
* @di: pointer to the ab5500_btemp structure
*
* This function will try to identify the battery by reading the ID
* resistor. Some brands use a combined ID resistor with a NTC resistor to
* both be able to identify and to read the temperature of it.
*/
static int ab5500_btemp_id(struct ab5500_btemp *di)
{
int res;
u8 i;
di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
di->bat->batt_id = BATTERY_UNKNOWN;
res = ab5500_btemp_get_batctrl_res(di);
if (res < 0) {
dev_err(di->dev, "%s get batctrl res failed\n", __func__);
return -ENXIO;
}
/* BATTERY_UNKNOWN is defined on position 0, skip it! */
for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) {
if ((res <= di->bat->bat_type[i].resis_high) &&
(res >= di->bat->bat_type[i].resis_low)) {
dev_dbg(di->dev, "Battery detected on %s"
" low %d < res %d < high: %d"
" index: %d\n",
di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ?
"BATCTRL" : "BATTEMP",
di->bat->bat_type[i].resis_low, res,
di->bat->bat_type[i].resis_high, i);
di->bat->batt_id = i;
break;
}
}
if (di->bat->batt_id == BATTERY_UNKNOWN) {
dev_warn(di->dev, "Battery identified as unknown"
", resistance %d Ohm\n", res);
return -ENXIO;
}
/*
* We only have to change current source if the
* detected type is Type 1, else we use the 7uA source
*/
if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
di->bat->batt_id == 1) {
dev_dbg(di->dev, "Set BATCTRL current source to 15uA\n");
di->curr_source = BTEMP_BATCTRL_CURR_SRC_15UA;
}
return di->bat->batt_id;
}
/**
* ab5500_btemp_periodic_work() - Measuring the temperature periodically
* @work: pointer to the work_struct structure
*
* Work function for measuring the temperature periodically
*/
static void ab5500_btemp_periodic_work(struct work_struct *work)
{
struct ab5500_btemp *di = container_of(work,
struct ab5500_btemp, btemp_periodic_work.work);
di->bat_temp = ab5500_btemp_measure_temp(di);
if (di->bat_temp != di->prev_bat_temp) {
di->prev_bat_temp = di->bat_temp;
power_supply_changed(&di->btemp_psy);
}
di->bat->temp_now = di->bat_temp;
/* Schedule a new measurement */
queue_delayed_work(di->btemp_wq,
&di->btemp_periodic_work,
round_jiffies(20 * HZ));
}
/**
* ab5500_btemp_batt_removal_handler() - battery removal detected
* @irq: interrupt number
* @_di: void pointer that has to address of ab5500_btemp
*
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab5500_btemp_batt_removal_handler(int irq, void *_di)
{
struct ab5500_btemp *di = _di;
dev_err(di->dev, "Battery removal detected!\n");
di->events.batt_rem = true;
power_supply_changed(&di->btemp_psy);
return IRQ_HANDLED;
}
/**
* ab5500_btemp_batt_attach_handler() - battery insertion detected
* @irq: interrupt number
* @_di: void pointer that has to address of ab5500_btemp
*
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab5500_btemp_batt_attach_handler(int irq, void *_di)
{
struct ab5500_btemp *di = _di;
dev_err(di->dev, "Battery attached!\n");
di->events.batt_rem = false;
power_supply_changed(&di->btemp_psy);
return IRQ_HANDLED;
}
/**
* ab5500_btemp_periodic() - Periodic temperature measurements
* @di: pointer to the ab5500_btemp structure
* @enable: enable or disable periodic temperature measurements
*
* Starts of stops periodic temperature measurements. Periodic measurements
* should only be done when a charger is connected.
*/
static void ab5500_btemp_periodic(struct ab5500_btemp *di,
bool enable)
{
dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n",
enable);
if (enable)
queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0);
else
cancel_delayed_work_sync(&di->btemp_periodic_work);
}
/**
* ab5500_btemp_get_property() - get the btemp properties
* @psy: pointer to the power_supply structure
* @psp: pointer to the power_supply_property structure
* @val: pointer to the power_supply_propval union
*
* This function gets called when an application tries to get the btemp
* properties by reading the sysfs files.
* online: presence of the battery
* present: presence of the battery
* technology: battery technology
* temp: battery temperature
* Returns error code in case of failure else 0(on success)
*/
static int ab5500_btemp_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct ab5500_btemp *di;
di = to_ab5500_btemp_device_info(psy);
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
case POWER_SUPPLY_PROP_ONLINE:
if (di->events.batt_rem)
val->intval = 0;
else
val->intval = 1;
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
val->intval = di->bat->bat_type[di->bat->batt_id].name;
break;
case POWER_SUPPLY_PROP_TEMP:
val->intval = di->bat_temp * 10;
break;
default:
return -EINVAL;
}
return 0;
}
static int ab5500_btemp_get_ext_psy_data(struct device *dev, void *data)
{
struct power_supply *psy;
struct power_supply *ext;
struct ab5500_btemp *di;
union power_supply_propval ret;
int i, j;
bool psy_found = false;
psy = (struct power_supply *)data;
ext = dev_get_drvdata(dev);
di = to_ab5500_btemp_device_info(psy);
/*
* For all psy where the name of your driver
* appears in any supplied_to
*/
for (i = 0; i < ext->num_supplicants; i++) {
if (!strcmp(ext->supplied_to[i], psy->name))
psy_found = true;
}
if (!psy_found)
return 0;
/* Go through all properties for the psy */
for (j = 0; j < ext->num_properties; j++) {
enum power_supply_property prop;
prop = ext->properties[j];
if (ext->get_property(ext, prop, &ret))
continue;
switch (prop) {
case POWER_SUPPLY_PROP_PRESENT:
switch (ext->type) {
case POWER_SUPPLY_TYPE_USB:
/* USB disconnected */
if (!ret.intval && di->events.usb_conn) {
di->events.usb_conn = false;
ab5500_btemp_periodic(di,
false);
}
/* USB connected */
else if (ret.intval && !di->events.usb_conn) {
di->events.usb_conn = true;
ab5500_btemp_periodic(di, true);
}
break;
default:
break;
}
break;
default:
break;
}
}
return 0;
}
/**
* ab5500_btemp_external_power_changed() - callback for power supply changes
* @psy: pointer to the structure power_supply
*
* This function is pointing to the function pointer external_power_changed
* of the structure power_supply.
* This function gets executed when there is a change in the external power
* supply to the btemp.
*/
static void ab5500_btemp_external_power_changed(struct power_supply *psy)
{
struct ab5500_btemp *di = to_ab5500_btemp_device_info(psy);
class_for_each_device(power_supply_class, NULL,
&di->btemp_psy, ab5500_btemp_get_ext_psy_data);
}
/* ab5500 btemp driver interrupts and their respective isr */
static struct ab5500_btemp_interrupts ab5500_btemp_irq[] = {
{"BATT_REMOVAL", ab5500_btemp_batt_removal_handler},
{"BATT_ATTACH", ab5500_btemp_batt_attach_handler},
};
static int ab5500_btemp_bat_temp_trig(int mux)
{
struct ab5500_btemp *di = ab5500_btemp_get();
if (di->bat_temp < BTEMP_THERMAL_LOW_LIMIT) {
dev_err(di->dev,
"battery temp less than lower threshold (-10 deg cel)\n");
power_supply_changed(&di->btemp_psy);
} else if (di->bat_temp > BTEMP_THERMAL_HIGH_LIMIT_62) {
dev_err(di->dev, "battery temp greater them max threshold\n");
power_supply_changed(&di->btemp_psy);
}
return 0;;
}
static int ab5500_btemp_auto_temp(struct ab5500_btemp *di)
{
struct adc_auto_input *auto_ip;
int ret = 0;
auto_ip = kzalloc(sizeof(struct adc_auto_input), GFP_KERNEL);
if (!auto_ip) {
dev_err(di->dev, "failed to allocate memory\n");
return -ENOMEM;
}
auto_ip->mux = BTEMP_BALL;
auto_ip->freq = MS500;
auto_ip->min = BTEMP_THERMAL_LOW_LIMIT;
auto_ip->max = BTEMP_THERMAL_HIGH_LIMIT_62;
auto_ip->auto_adc_callback = ab5500_btemp_bat_temp_trig;
di->gpadc_auto = auto_ip;
ret = ab5500_gpadc_convert_auto(di->gpadc, di->gpadc_auto);
if (ret)
dev_err(di->dev,
"failed to set auto trigger for battery temp\n");
return ret;
}
#if defined(CONFIG_PM)
static int ab5500_btemp_resume(struct platform_device *pdev)
{
struct ab5500_btemp *di = platform_get_drvdata(pdev);
if (di->events.usb_conn)
ab5500_btemp_periodic(di, true);
return 0;
}
static int ab5500_btemp_suspend(struct platform_device *pdev,
pm_message_t state)
{
struct ab5500_btemp *di = platform_get_drvdata(pdev);
if (di->events.usb_conn)
ab5500_btemp_periodic(di, false);
return 0;
}
#else
#define ab5500_btemp_suspend NULL
#define ab5500_btemp_resume NULL
#endif
static int __devexit ab5500_btemp_remove(struct platform_device *pdev)
{
struct ab5500_btemp *di = platform_get_drvdata(pdev);
int i, irq;
/* Disable interrupts */
for (i = 0; i < ARRAY_SIZE(ab5500_btemp_irq); i++) {
irq = platform_get_irq_byname(pdev, ab5500_btemp_irq[i].name);
free_irq(irq, di);
}
/* Delete the work queue */
destroy_workqueue(di->btemp_wq);
flush_scheduled_work();
power_supply_unregister(&di->btemp_psy);
platform_set_drvdata(pdev, NULL);
kfree(di->gpadc_auto);
kfree(di);
return 0;
}
static int __devinit ab5500_btemp_probe(struct platform_device *pdev)
{
int irq, i, ret = 0;
struct abx500_bm_plat_data *plat_data;
struct ab5500_btemp *di =
kzalloc(sizeof(struct ab5500_btemp), GFP_KERNEL);
if (!di)
return -ENOMEM;
/* get parent data */
di->dev = &pdev->dev;
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab5500_gpadc_get("ab5500-adc.0");
plat_data = pdev->dev.platform_data;
di->pdata = plat_data->btemp;
di->bat = plat_data->battery;
/* get btemp specific platform data */
if (!di->pdata) {
dev_err(di->dev, "no btemp platform data supplied\n");
ret = -EINVAL;
goto free_device_info;
}
/* get battery specific platform data */
if (!di->bat) {
dev_err(di->dev, "no battery platform data supplied\n");
ret = -EINVAL;
goto free_device_info;
}
/* BTEMP supply */
di->btemp_psy.name = "ab5500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
di->btemp_psy.properties = ab5500_btemp_props;
di->btemp_psy.num_properties = ARRAY_SIZE(ab5500_btemp_props);
di->btemp_psy.get_property = ab5500_btemp_get_property;
di->btemp_psy.supplied_to = di->pdata->supplied_to;
di->btemp_psy.num_supplicants = di->pdata->num_supplicants;
di->btemp_psy.external_power_changed =
ab5500_btemp_external_power_changed;
/* Create a work queue for the btemp */
di->btemp_wq =
create_singlethread_workqueue("ab5500_btemp_wq");
if (di->btemp_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
goto free_device_info;
}
/* Init work for measuring temperature periodically */
INIT_DELAYED_WORK_DEFERRABLE(&di->btemp_periodic_work,
ab5500_btemp_periodic_work);
/* Get Chip ID of the ABB ASIC */
ret = abx500_get_chip_id(di->dev);
if (ret < 0) {
dev_err(di->dev, "failed to get chip ID\n");
goto free_btemp_wq;
}
di->chip_id = ret;
dev_dbg(di->dev, "ab5500 CID is: 0x%02x\n",
di->chip_id);
/* Identify the battery */
if (ab5500_btemp_id(di) < 0)
dev_warn(di->dev, "failed to identify the battery\n");
/* Measure temperature once initially */
di->bat_temp = ab5500_btemp_measure_temp(di);
di->bat->temp_now = di->bat_temp;
/* Register BTEMP power supply class */
ret = power_supply_register(di->dev, &di->btemp_psy);
if (ret) {
dev_err(di->dev, "failed to register BTEMP psy\n");
goto free_btemp_wq;
}
/* Register interrupts */
for (i = 0; i < ARRAY_SIZE(ab5500_btemp_irq); i++) {
irq = platform_get_irq_byname(pdev, ab5500_btemp_irq[i].name);
ret = request_threaded_irq(irq, NULL, ab5500_btemp_irq[i].isr,
IRQF_SHARED | IRQF_NO_SUSPEND,
ab5500_btemp_irq[i].name, di);
if (ret) {
dev_err(di->dev, "failed to request %s IRQ %d: %d\n"
, ab5500_btemp_irq[i].name, irq, ret);
goto free_irq;
}
dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
ab5500_btemp_irq[i].name, irq, ret);
}
ret = ab5500_btemp_auto_temp(di);
if (ret) {
dev_err(di->dev,
"failed to register auto trigger for battery temp\n");
goto free_irq;
}
platform_set_drvdata(pdev, di);
dev_info(di->dev, "probe success\n");
return ret;
free_irq:
power_supply_unregister(&di->btemp_psy);
/* We also have to free all successfully registered irqs */
for (i = i - 1; i >= 0; i--) {
irq = platform_get_irq_byname(pdev, ab5500_btemp_irq[i].name);
free_irq(irq, di);
}
free_btemp_wq:
destroy_workqueue(di->btemp_wq);
free_device_info:
kfree(di);
return ret;
}
static struct platform_driver ab5500_btemp_driver = {
.probe = ab5500_btemp_probe,
.remove = __devexit_p(ab5500_btemp_remove),
.suspend = ab5500_btemp_suspend,
.resume = ab5500_btemp_resume,
.driver = {
.name = "ab5500-btemp",
.owner = THIS_MODULE,
},
};
static int __init ab5500_btemp_init(void)
{
return platform_driver_register(&ab5500_btemp_driver);
}
static void __exit ab5500_btemp_exit(void)
{
platform_driver_unregister(&ab5500_btemp_driver);
}
subsys_initcall_sync(ab5500_btemp_init);
module_exit(ab5500_btemp_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
MODULE_ALIAS("platform:ab5500-btemp");
MODULE_DESCRIPTION("AB5500 battery temperature driver");
|