Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig

1 files changed, 15 insertions, 12 deletions

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e9dd79149a8..7c5e2112c77 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -283,9 +283,6 @@ static void __init osk_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	osk_init_smc91x();
-	osk_init_cf();
 }
 
 static struct omap_usb_config osk_usb_config __initdata = {
@@ -341,25 +338,28 @@ static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
 	 */
 };
 
-static const int osk_keymap[] = {
+static const unsigned int osk_keymap[] = {
 	/* KEY(col, row, code) */
 	KEY(0, 0, KEY_F1),		/* SW4 */
-	KEY(0, 3, KEY_UP),		/* (sw2/up) */
+	KEY(3, 0, KEY_UP),		/* (sw2/up) */
 	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
-	KEY(1, 2, KEY_LEFT),		/* (sw2/left) */
-	KEY(2, 0, KEY_SPACE),		/* SW3 */
-	KEY(2, 1, KEY_ESC),		/* SW6 */
+	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
+	KEY(0, 2, KEY_SPACE),		/* SW3 */
+	KEY(1, 2, KEY_ESC),		/* SW6 */
 	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
-	KEY(3, 2, KEY_ENTER),		/* (sw2/select) */
+	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
 	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
-	0
+};
+
+static const struct matrix_keymap_data osk_keymap_data = {
+	.keymap		= osk_keymap,
+	.keymap_size	= ARRAY_SIZE(osk_keymap),
 };
 
 static struct omap_kp_platform_data osk_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= (int *) osk_keymap,
-	.keymapsize	= ARRAY_SIZE(osk_keymap),
+	.keymap_data	= &osk_keymap_data,
 	.delay		= 9,
 };
 
@@ -541,6 +541,9 @@ static void __init osk_init(void)
 {
 	u32 l;
 
+	osk_init_smc91x();
+	osk_init_cf();
+
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
 	 * wrong CS3 memory timings. This mainly leads to CRC