u5500: move pins to separate file

As on 8500.

ST-Ericsson Linux next: -
ST-Ericsson ID: WP257121
ST-Ericsson FOSS-OUT ID: Trivial

Change-Id: I0dd20c6b99559fa4690d2d353553a6ebce7fdb90
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/22357
Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>

Conflicts:

	arch/arm/mach-ux500/Makefile

1 files changed, 1 insertions, 92 deletions

diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 2b86760898e..b9f5fb4468f 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -1,7 +1,6 @@
 /*
  * Copyright (C) ST-Ericsson SA 2010
  *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
  * License terms: GNU General Public License (GPL) version 2
  */
 
@@ -40,95 +39,6 @@
 #include "board-u5500.h"
 
 /*
- * GPIO
- */
-
-static pin_cfg_t u5500_pins[] = {
-	/* I2C */
-	GPIO3_I2C1_SCL	| PIN_INPUT_PULLUP,
-	GPIO4_I2C1_SDA	| PIN_INPUT_PULLUP,
-	GPIO218_I2C2_SCL	| PIN_INPUT_PULLUP,
-	GPIO219_I2C2_SDA	| PIN_INPUT_PULLUP,
-
-	/* Keypad */
-	GPIO128_KP_I0	| PIN_INPUT_PULLUP,
-	GPIO130_KP_I1	| PIN_INPUT_PULLUP,
-	GPIO132_KP_I2	| PIN_INPUT_PULLUP,
-	GPIO134_KP_I3	| PIN_INPUT_PULLUP,
-	GPIO137_KP_O4	| PIN_INPUT_PULLUP,
-	GPIO139_KP_O5	| PIN_INPUT_PULLUP,
-
-	/* MSP */
-	GPIO32_MSP0_TCK		| PIN_INPUT_PULLDOWN,
-	GPIO33_MSP0_TFS		| PIN_INPUT_PULLDOWN,
-	GPIO34_MSP0_TXD		| PIN_INPUT_PULLDOWN,
-	GPIO35_MSP0_RXD		| PIN_INPUT_PULLDOWN,
-	GPIO96_MSP1_TCK		| PIN_INPUT_PULLDOWN,
-	GPIO97_MSP1_TFS		| PIN_INPUT_PULLDOWN,
-	GPIO98_MSP1_TXD		| PIN_INPUT_PULLDOWN,
-	GPIO99_MSP1_RXD		| PIN_INPUT_PULLDOWN,
-	GPIO220_MSP2_TCK	| PIN_OUTPUT_LOW,
-	GPIO221_MSP2_TFS	| PIN_OUTPUT_LOW,
-	GPIO222_MSP2_TXD	| PIN_OUTPUT_LOW,
-
-	/* DISPLAY_ENABLE */
-	GPIO226_GPIO        | PIN_OUTPUT_LOW,
-
-	/* Backlight Enable */
-	GPIO224_GPIO        | PIN_OUTPUT_HIGH,
-
-	/* MMC0 (POP eMMC) */
-	GPIO5_MC0_DAT0		| PIN_INPUT_PULLUP,
-	GPIO6_MC0_DAT1		| PIN_INPUT_PULLUP,
-	GPIO7_MC0_DAT2		| PIN_INPUT_PULLUP,
-	GPIO8_MC0_DAT3		| PIN_INPUT_PULLUP,
-	GPIO9_MC0_DAT4		| PIN_INPUT_PULLUP,
-	GPIO10_MC0_DAT5		| PIN_INPUT_PULLUP,
-	GPIO11_MC0_DAT6		| PIN_INPUT_PULLUP,
-	GPIO12_MC0_DAT7		| PIN_INPUT_PULLUP,
-	GPIO13_MC0_CMD		| PIN_INPUT_PULLUP,
-	GPIO14_MC0_CLK		| PIN_OUTPUT_LOW,
-
-	/* SPI */
-	GPIO167_SPI1_CS0n	| PIN_OUTPUT_HIGH,
-	GPIO168_SPI1_RXD	| PIN_INPUT_PULLDOWN,
-	GPIO169_SPI1_TXD	| PIN_OUTPUT_LOW,
-	GPIO170_SPI1_CLK	| PIN_OUTPUT_LOW,
-
-	/* AB5500 */
-	GPIO78_IRQn,
-
-	/* TOUCH_IRQ */
-	GPIO179_GPIO	| PIN_INPUT_PULLUP,
-
-	/* SDI1 (SD-CARD) */
-	GPIO191_MC1_DAT0	| PIN_INPUT_PULLUP,
-	GPIO192_MC1_DAT1	| PIN_INPUT_PULLUP,
-	GPIO193_MC1_DAT2	| PIN_INPUT_PULLUP,
-	GPIO194_MC1_DAT3	| PIN_INPUT_PULLUP,
-	GPIO195_MC1_CLK		| PIN_OUTPUT_LOW,
-	GPIO196_MC1_CMD		| PIN_INPUT_PULLUP,
-	GPIO197_MC1_CMDDIR	| PIN_OUTPUT_HIGH,
-	GPIO198_MC1_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO199_MC1_DAT0DIR	| PIN_OUTPUT_HIGH,
-	/* SD-CARD detect/levelshifter pins */
-	GPIO180_GPIO		| PIN_INPUT_PULLUP,
-	GPIO227_GPIO,
-	GPIO185_GPIO,
-
-	/* SDI3 (SDIO) */
-	GPIO171_MC3_DAT0	| PIN_INPUT_PULLUP,
-	GPIO172_MC3_DAT1	| PIN_INPUT_PULLUP,
-	GPIO173_MC3_DAT2	| PIN_INPUT_PULLUP,
-	GPIO174_MC3_DAT3	| PIN_INPUT_PULLUP,
-	GPIO175_MC3_CMD		| PIN_INPUT_PULLUP,
-	GPIO176_MC3_CLK		| PIN_OUTPUT_LOW,
-
-	/* Display & HDMI HW sync */
-	GPIO204_LCD_VSI1	| PIN_INPUT_PULLUP,
-};
-
-/*
  * LSM303DLH
  */
 
@@ -419,8 +329,7 @@ static void __init u5500_uart_init(void)
 static void __init u5500_init_machine(void)
 {
 	u5500_init_devices();
-
-	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
+	u5500_pins_init();
 
 	u5500_i2c_init();
 	u5500_msp_init();