diff options
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index ae676be072a..11bb99d5a74 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -98,18 +98,18 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { * on value present in GpioSel1 to GpioSel6 and AlternatFunction * register. This is the array of 7 configuration settings. * One has to compile time decide these settings. Below is the - * explanation of these setting - * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO + * explaination of these setting + * GpioSel1 = 0x02 => Pin GPIO2 (SysClkReq3) is configured as GPIO * GpioSel2 = 0x9E => Pins GPIO10..13 & GPIO16 are configured as GPIO * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO - * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO + * GpioSel6 = 0x02 => Pin GPIO42 (SysClkReq5) is configured as GPIO * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured * as GPIO then this register selectes the alternate fucntions */ - .config_reg = {0x00, 0x9E, 0x80, 0x01, - 0x7A, 0x00, 0x00}, + .config_reg = {0x02, 0x9E, 0x80, 0x01, + 0x7A, 0x02, 0x00}, }; #ifdef CONFIG_INPUT_AB8500_ACCDET |