diff options
Diffstat (limited to 'arch/arm/plat-omap')
| -rw-r--r-- | arch/arm/plat-omap/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/plat-omap/devices.c | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/dma.c | 4 | ||||
| -rw-r--r-- | arch/arm/plat-omap/gpio.c | 66 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/flash.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/gpio.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/gpmc.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/irqs.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/onenand.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/smp.h | 36 | ||||
| -rw-r--r-- | arch/arm/plat-omap/iommu.c | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/mcbsp.c | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/omap_device.c | 23 |
13 files changed, 55 insertions, 90 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index cd5f993612f..e9c0efc5d4a 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -12,6 +12,7 @@ choice config ARCH_OMAP1 bool "TI OMAP1" select CLKDEV_LOOKUP + select CLKSRC_MMIO help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 7d9f815cede..ea28f98d5d6 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base); * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ec3b5d9f21..c22217c2ee5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting + * is a chance for CSSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_src_pos(int lch) @@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting + * is a chance for CDSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_dst_pos(int lch) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 971d1863694..bd9e32187ea 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -17,7 +17,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> @@ -755,18 +755,12 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) bank = irq_data_get_irq_chip_data(d); spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); - if (retval == 0) { - struct irq_desc *desc = irq_to_desc(d->irq); - - desc->status &= ~IRQ_TYPE_SENSE_MASK; - desc->status |= type; - } spin_unlock_irqrestore(&bank->lock, flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __set_irq_handler_unlocked(d->irq, handle_level_irq); + __irq_set_handler_locked(d->irq, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __set_irq_handler_unlocked(d->irq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); return retval; } @@ -1146,7 +1140,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) desc->irq_data.chip->irq_ack(&desc->irq_data); - bank = get_irq_data(irq); + bank = irq_get_handler_data(irq); #ifdef CONFIG_ARCH_OMAP1 if (bank->method == METHOD_MPUIO) isr_reg = bank->base + @@ -1270,8 +1264,7 @@ static void gpio_unmask_irq(struct irq_data *d) unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); unsigned int irq_mask = 1 << get_gpio_index(gpio); - struct irq_desc *desc = irq_to_desc(d->irq); - u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + u32 trigger = irqd_get_trigger_type(d); if (trigger) _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); @@ -1379,9 +1372,7 @@ static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { .resume_noirq = omap_mpuio_resume_noirq, }; -/* use platform_driver for this, now that there's no longer any - * point to sys_device (other than not disturbing old code). - */ +/* use platform_driver for this. */ static struct platform_driver omap_mpuio_driver = { .driver = { .name = "mpuio", @@ -1672,19 +1663,17 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank) for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + bank_width; j++) { - struct irq_desc *d = irq_to_desc(j); - - lockdep_set_class(&d->lock, &gpio_lock_class); - set_irq_chip_data(j, bank); + irq_set_lockdep_class(j, &gpio_lock_class); + irq_set_chip_data(j, bank); if (bank_is_mpuio(bank)) - set_irq_chip(j, &mpuio_irq_chip); + irq_set_chip(j, &mpuio_irq_chip); else - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_simple_irq); + irq_set_chip(j, &gpio_irq_chip); + irq_set_handler(j, handle_simple_irq); set_irq_flags(j, IRQF_VALID); } - set_irq_chained_handler(bank->irq, gpio_irq_handler); - set_irq_data(bank->irq, bank); + irq_set_chained_handler(bank->irq, gpio_irq_handler); + irq_set_handler_data(bank->irq, bank); } static int __devinit omap_gpio_probe(struct platform_device *pdev) @@ -1754,7 +1743,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) } #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) -static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) +static int omap_gpio_suspend(void) { int i; @@ -1804,12 +1793,12 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) return 0; } -static int omap_gpio_resume(struct sys_device *dev) +static void omap_gpio_resume(void) { int i; if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return 0; + return; for (i = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; @@ -1845,21 +1834,13 @@ static int omap_gpio_resume(struct sys_device *dev) __raw_writel(bank->saved_wakeup, wake_set); spin_unlock_irqrestore(&bank->lock, flags); } - - return 0; } -static struct sysdev_class omap_gpio_sysclass = { - .name = "gpio", +static struct syscore_ops omap_gpio_syscore_ops = { .suspend = omap_gpio_suspend, .resume = omap_gpio_resume, }; -static struct sys_device omap_gpio_device = { - .id = 0, - .cls = &omap_gpio_sysclass, -}; - #endif #ifdef CONFIG_ARCH_OMAP2PLUS @@ -2117,21 +2098,14 @@ postcore_initcall(omap_gpio_drv_reg); static int __init omap_gpio_sysinit(void) { - int ret = 0; - mpuio_init(); #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) { - if (ret == 0) { - ret = sysdev_class_register(&omap_gpio_sysclass); - if (ret == 0) - ret = sysdev_register(&omap_gpio_device); - } - } + if (cpu_is_omap16xx() || cpu_class_is_omap2()) + register_syscore_ops(&omap_gpio_syscore_ops); #endif - return ret; + return 0; } arch_initcall(omap_gpio_sysinit); diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h index 3e6327016b4..3083195123e 100644 --- a/arch/arm/plat-omap/include/plat/flash.h +++ b/arch/arm/plat-omap/include/plat/flash.h @@ -11,6 +11,6 @@ #include <linux/mtd/map.h> -extern void omap1_set_vpp(struct map_info *map, int enable); +extern void omap1_set_vpp(struct platform_device *pdev, int enable); #endif diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index d6f9fa0f62a..cac2e8ac696 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void); /* Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. * * - * The original OMAP-specfic calls should eventually be removed. + * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 12b31616503..1527929b445 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,7 +90,7 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at begining of spare area as romcode */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ }; diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index d7792837046..5a25098ea7e 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -416,7 +416,7 @@ /* GPMC related */ #define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) -#define OMAP_GPMC_NR_IRQS 7 +#define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h index cbe897ca7f9..2858667d2e4 100644 --- a/arch/arm/plat-omap/include/plat/onenand.h +++ b/arch/arm/plat-omap/include/plat/onenand.h @@ -32,6 +32,7 @@ struct omap_onenand_platform_data { int dma_channel; u8 flags; u8 regulator_can_sleep; + u8 skip_initial_unlocking; }; #define ONENAND_MAX_PARTITIONS 8 diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h deleted file mode 100644 index 7a10257909e..00000000000 --- a/arch/arm/plat-omap/include/plat/smp.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * OMAP4 machine specific smp.h - * - * Copyright (C) 2009 Texas Instruments, Inc. - * - * Author: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * Interface functions needed for the SMP. This file is based on arm - * realview smp platform. - * Copyright (c) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef OMAP_ARCH_SMP_H -#define OMAP_ARCH_SMP_H - -#include <asm/hardware/gic.h> - -/* Needed for secondary core boot */ -extern void omap_secondary_startup(void); -extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); -extern void omap_auxcoreboot_addr(u32 cpu_addr); -extern u32 omap_read_auxcoreboot0(void); - -/* - * We use Soft IRQ1 as the IPI - */ -static inline void smp_cross_call(const struct cpumask *mask, int ipi) -{ - gic_raise_softirq(mask, ipi); -} - -#endif diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 8a51fd58f65..34fc31ee908 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) clk_enable(obj->clk); errs = iommu_report_fault(obj, &da); clk_disable(obj->clk); + if (errs == 0) + return IRQ_HANDLED; /* Fault callback or TLB/PTE Dynamic loading */ if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv)) diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d598d9fd65a..5587acf0eb2 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) /* resend */ return -1; } else { - /* wait for recieve confirmation */ + /* wait for receive confirmation */ int attemps = 0; while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { if (attemps++ > 1000) { diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 9bbda9acb73..a37b8eb65b7 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -536,6 +536,28 @@ int omap_early_device_register(struct omap_device *od) return 0; } +static int _od_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + return omap_device_idle(pdev); +} + +static int _od_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + return omap_device_enable(pdev); +} + +static struct dev_power_domain omap_device_power_domain = { + .ops = { + .runtime_suspend = _od_runtime_suspend, + .runtime_resume = _od_runtime_resume, + USE_PLATFORM_PM_SLEEP_OPS + } +}; + /** * omap_device_register - register an omap_device with one omap_hwmod * @od: struct omap_device * to register @@ -549,6 +571,7 @@ int omap_device_register(struct omap_device *od) pr_debug("omap_device: %s: registering\n", od->pdev.name); od->pdev.dev.parent = &omap_device_parent; + od->pdev.dev.pwr_domain = &omap_device_power_domain; return platform_device_register(&od->pdev); } |