diff options
Diffstat (limited to 'drivers/edac/i7core_edac.c')
-rw-r--r-- | drivers/edac/i7core_edac.c | 104 |
1 files changed, 51 insertions, 53 deletions
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 86af14840b8..72859e87aeb 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -32,9 +32,6 @@ #include "edac_core.h" -/* To use the new pci_[read/write]_config_qword instead of two dword */ -#define USE_QWORD 0 - /* * Alter this version for the module when modifications are made */ @@ -473,7 +470,7 @@ static int get_dimm_config(struct mem_ctl_info *mci, int *csrow, u8 socket) "x%x x 0x%x\n", numdimms(pvt->info.max_dod), numrank(pvt->info.max_dod >> 2), - numbank(pvt->info.max_dod >> 4)); + numbank(pvt->info.max_dod >> 4), numrow(pvt->info.max_dod >> 6), numcol(pvt->info.max_dod >> 9)); @@ -646,7 +643,7 @@ static ssize_t i7core_inject_socket_store(struct mem_ctl_info *mci, int rc; rc = strict_strtoul(data, 10, &value); - if ((rc < 0) || (value > pvt->sockets)) + if ((rc < 0) || (value >= pvt->sockets)) return 0; pvt->inject.section = (u32) value; @@ -803,7 +800,7 @@ static ssize_t i7core_inject_addrmatch_store(struct mem_ctl_info *mci, else return cmd - data; } else if (!strcasecmp(cmd, "dimm")) { - if (value < 4) + if (value < 3) pvt->inject.dimm = value; else return cmd - data; @@ -813,7 +810,7 @@ static ssize_t i7core_inject_addrmatch_store(struct mem_ctl_info *mci, else return cmd - data; } else if (!strcasecmp(cmd, "bank")) { - if (value < 4) + if (value < 32) pvt->inject.bank = value; else return cmd - data; @@ -870,6 +867,28 @@ static ssize_t i7core_inject_addrmatch_show(struct mem_ctl_info *mci, channel, dimm, bank, rank, page, col); } +static int write_and_test(struct pci_dev *dev, int where, u32 val) +{ + u32 read; + int count; + + for (count = 0; count < 10; count++) { + if (count) + msleep (100); + pci_write_config_dword(dev, where, val); + pci_read_config_dword(dev, where, &read); + + if (read == val) + return 0; + } + + debugf0("Error Injection Register 0x%02x: Tried to write 0x%08x, " + "but read: 0x%08x\n", where, val, read); + + return -EINVAL; +} + + /* * This routine prepares the Memory Controller for error injection. * The error will be injected when some process tries to write to the @@ -949,70 +968,49 @@ static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci, else mask |= (pvt->inject.col & 0x3fffL); - /* Unlock writes to registers */ + /* + * bit 0: REPEAT_EN + * bits 1-2: MASK_HALF_CACHELINE + * bit 3: INJECT_ECC + * bit 4: INJECT_ADDR_PARITY + */ + + injectmask = (pvt->inject.type & 1) | + (pvt->inject.section & 0x3) << 1 | + (pvt->inject.type & 0x6) << (3 - 1); + + /* Unlock writes to registers - this register is write only */ pci_write_config_dword(pvt->pci_noncore[pvt->inject.socket], MC_CFG_CONTROL, 0x2); - msleep(100); +#if 0 /* Zeroes error count registers */ pci_write_config_dword(pvt->pci_mcr[pvt->inject.socket][4], MC_TEST_ERR_RCV1, 0); pci_write_config_dword(pvt->pci_mcr[pvt->inject.socket][4], MC_TEST_ERR_RCV0, 0); pvt->ce_count_available[pvt->inject.socket] = 0; +#endif - -#if USE_QWORD - pci_write_config_qword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], + write_and_test(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], MC_CHANNEL_ADDR_MATCH, mask); -#else - pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], - MC_CHANNEL_ADDR_MATCH, mask); - pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], + write_and_test(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L); -#endif -#if 1 -#if USE_QWORD - u64 rdmask; - pci_read_config_qword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], - MC_CHANNEL_ADDR_MATCH, &rdmask); - debugf0("Inject addr match write 0x%016llx, read: 0x%016llx\n", - mask, rdmask); -#else - u32 rdmask1, rdmask2; - - pci_read_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], - MC_CHANNEL_ADDR_MATCH, &rdmask1); - pci_read_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], - MC_CHANNEL_ADDR_MATCH + 4, &rdmask2); - - debugf0("Inject addr match write 0x%016llx, read: 0x%08x 0x%08x\n", - mask, rdmask1, rdmask2); -#endif -#endif - - pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], + write_and_test(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask); + write_and_test(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], + MC_CHANNEL_ERROR_MASK, injectmask); + /* - * bit 0: REPEAT_EN - * bits 1-2: MASK_HALF_CACHELINE - * bit 3: INJECT_ECC - * bit 4: INJECT_ADDR_PARITY + * This is something undocumented, based on my tests + * Without writing 8 to this register, errors aren't injected. Not sure + * why. */ + pci_write_config_dword(pvt->pci_noncore[pvt->inject.socket], + MC_CFG_CONTROL, 8); - injectmask = (pvt->inject.type & 1) | - (pvt->inject.section & 0x3) << 1 | - (pvt->inject.type & 0x6) << (3 - 1); - - pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0], - MC_CHANNEL_ERROR_MASK, injectmask); - -#if 0 - /* lock writes to registers */ - pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, 0); -#endif debugf0("Error inject addr match 0x%016llx, ecc 0x%08x," " inject 0x%08x\n", mask, pvt->inject.eccmask, injectmask); |