diff options
Diffstat (limited to 'drivers/mmc/imxmmc.c')
-rw-r--r-- | drivers/mmc/imxmmc.c | 69 |
1 files changed, 35 insertions, 34 deletions
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 7ca9e95bdf8..fb6565b98f3 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -91,6 +91,8 @@ struct imxmci_host { int dma_allocated; unsigned char actual_bus_width; + + int prev_cmd_code; }; #define IMXMCI_PEND_IRQ_b 0 @@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) * partial FIFO fills and reads. The length has to be rounded up to burst size multiple. * This is required for SCR read at least. */ - if (datasz < 64) { + if (datasz < 512) { host->dma_size = datasz; if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; /* Hack to enable read SCR */ - if(datasz < 16) { - MMC_NOB = 1; - MMC_BLK_LEN = 16; - } + MMC_NOB = 1; + MMC_BLK_LEN = 512; } else { host->dma_dir = DMA_TO_DEVICE; } @@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request * spin_unlock_irqrestore(&host->lock, flags); + if(req && req->cmd) + host->prev_cmd_code = req->cmd->opcode; + host->req = NULL; host->cmd = NULL; host->data = NULL; @@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) { int i; int burst_len; - int flush_len; int trans_done = 0; unsigned int stat = *pstat; @@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n", stat); + udelay(20); /* required for clocks < 8MHz*/ + if(host->dma_dir == DMA_FROM_DEVICE) { imxmci_busy_wait_for_status(host, &stat, STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE, - 20, "imxmci_cpu_driven_data read"); + 50, "imxmci_cpu_driven_data read"); while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && - (host->data_cnt < host->dma_size)) { - if(burst_len >= host->dma_size - host->data_cnt) { - flush_len = burst_len; - burst_len = host->dma_size - host->data_cnt; - flush_len -= burst_len; - host->data_cnt = host->dma_size; - trans_done = 1; - } else { - flush_len = 0; - host->data_cnt += burst_len; - } + (host->data_cnt < 512)) { + + udelay(20); /* required for clocks < 8MHz*/ for(i = burst_len; i>=2 ; i-=2) { - *(host->data_ptr++) = MMC_BUFFER_ACCESS; - udelay(20); /* required for clocks < 8MHz*/ + u16 data; + data = MMC_BUFFER_ACCESS; + udelay(10); /* required for clocks < 8MHz*/ + if(host->data_cnt+2 <= host->dma_size) { + *(host->data_ptr++) = data; + } else { + if(host->data_cnt < host->dma_size) + *(u8*)(host->data_ptr) = data; + } + host->data_cnt += 2; } - if(i == 1) - *(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS; - stat = MMC_STATUS; - /* Flush extra bytes from FIFO */ - while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){ - i = MMC_BUFFER_ACCESS; - stat = MMC_STATUS; - stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */ - } - - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n", - burst_len, stat); + dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n", + host->data_cnt, burst_len, stat); } + + if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) + trans_done = 1; + + if(host->dma_size & 0x1ff) + stat &= ~STATUS_CRC_READ_ERR; + } else { imxmci_busy_wait_for_status(host, &stat, STATUS_APPL_BUFF_FE, @@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data) what, stat, MMC_INT_MASK); dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma)); - dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n", - host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size); + dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n", + host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size); } if(!host->present || timeout) |