summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/bluetooth/hci_ath.c26
-rw-r--r--drivers/char/Kconfig540
-rw-r--r--drivers/char/Makefile24
-rw-r--r--drivers/char/pcmcia/Makefile2
-rw-r--r--drivers/char/pcmcia/synclink_cs.c13
-rw-r--r--drivers/char/ttyprintk.c2
-rw-r--r--drivers/isdn/capi/capi.c10
-rw-r--r--drivers/isdn/gigaset/interface.c12
-rw-r--r--drivers/isdn/gigaset/ser-gigaset.c2
-rw-r--r--drivers/isdn/i4l/isdn_tty.c7
-rw-r--r--drivers/misc/pch_phub.c20
-rw-r--r--drivers/mmc/card/sdio_uart.c4
-rw-r--r--drivers/net/irda/irtty-sir.c2
-rw-r--r--drivers/net/usb/hso.c10
-rw-r--r--drivers/net/wan/pc300_tty.c9
-rw-r--r--drivers/s390/char/keyboard.c4
-rw-r--r--drivers/s390/char/keyboard.h2
-rw-r--r--drivers/s390/char/tty3270.c14
-rw-r--r--drivers/staging/Kconfig4
-rw-r--r--drivers/staging/Makefile2
-rw-r--r--drivers/staging/generic_serial/Kconfig45
-rw-r--r--drivers/staging/generic_serial/Makefile6
-rw-r--r--drivers/staging/generic_serial/TODO6
-rw-r--r--drivers/staging/generic_serial/generic_serial.c (renamed from drivers/char/generic_serial.c)4
-rw-r--r--drivers/staging/generic_serial/rio/Makefile (renamed from drivers/char/rio/Makefile)0
-rw-r--r--drivers/staging/generic_serial/rio/board.h (renamed from drivers/char/rio/board.h)0
-rw-r--r--drivers/staging/generic_serial/rio/cirrus.h (renamed from drivers/char/rio/cirrus.h)0
-rw-r--r--drivers/staging/generic_serial/rio/cmdblk.h (renamed from drivers/char/rio/cmdblk.h)0
-rw-r--r--drivers/staging/generic_serial/rio/cmdpkt.h (renamed from drivers/char/rio/cmdpkt.h)0
-rw-r--r--drivers/staging/generic_serial/rio/daemon.h (renamed from drivers/char/rio/daemon.h)0
-rw-r--r--drivers/staging/generic_serial/rio/errors.h (renamed from drivers/char/rio/errors.h)0
-rw-r--r--drivers/staging/generic_serial/rio/func.h (renamed from drivers/char/rio/func.h)0
-rw-r--r--drivers/staging/generic_serial/rio/host.h (renamed from drivers/char/rio/host.h)0
-rw-r--r--drivers/staging/generic_serial/rio/link.h (renamed from drivers/char/rio/link.h)0
-rw-r--r--drivers/staging/generic_serial/rio/linux_compat.h (renamed from drivers/char/rio/linux_compat.h)0
-rw-r--r--drivers/staging/generic_serial/rio/map.h (renamed from drivers/char/rio/map.h)0
-rw-r--r--drivers/staging/generic_serial/rio/param.h (renamed from drivers/char/rio/param.h)0
-rw-r--r--drivers/staging/generic_serial/rio/parmmap.h (renamed from drivers/char/rio/parmmap.h)0
-rw-r--r--drivers/staging/generic_serial/rio/pci.h (renamed from drivers/char/rio/pci.h)0
-rw-r--r--drivers/staging/generic_serial/rio/phb.h (renamed from drivers/char/rio/phb.h)0
-rw-r--r--drivers/staging/generic_serial/rio/pkt.h (renamed from drivers/char/rio/pkt.h)0
-rw-r--r--drivers/staging/generic_serial/rio/port.h (renamed from drivers/char/rio/port.h)0
-rw-r--r--drivers/staging/generic_serial/rio/protsts.h (renamed from drivers/char/rio/protsts.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rio.h (renamed from drivers/char/rio/rio.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rio_linux.c (renamed from drivers/char/rio/rio_linux.c)0
-rw-r--r--drivers/staging/generic_serial/rio/rio_linux.h (renamed from drivers/char/rio/rio_linux.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rioboard.h (renamed from drivers/char/rio/rioboard.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rioboot.c (renamed from drivers/char/rio/rioboot.c)0
-rw-r--r--drivers/staging/generic_serial/rio/riocmd.c (renamed from drivers/char/rio/riocmd.c)0
-rw-r--r--drivers/staging/generic_serial/rio/rioctrl.c (renamed from drivers/char/rio/rioctrl.c)0
-rw-r--r--drivers/staging/generic_serial/rio/riodrvr.h (renamed from drivers/char/rio/riodrvr.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rioinfo.h (renamed from drivers/char/rio/rioinfo.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rioinit.c (renamed from drivers/char/rio/rioinit.c)0
-rw-r--r--drivers/staging/generic_serial/rio/riointr.c (renamed from drivers/char/rio/riointr.c)0
-rw-r--r--drivers/staging/generic_serial/rio/rioioctl.h (renamed from drivers/char/rio/rioioctl.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rioparam.c (renamed from drivers/char/rio/rioparam.c)0
-rw-r--r--drivers/staging/generic_serial/rio/rioroute.c (renamed from drivers/char/rio/rioroute.c)0
-rw-r--r--drivers/staging/generic_serial/rio/riospace.h (renamed from drivers/char/rio/riospace.h)0
-rw-r--r--drivers/staging/generic_serial/rio/riotable.c (renamed from drivers/char/rio/riotable.c)0
-rw-r--r--drivers/staging/generic_serial/rio/riotty.c (renamed from drivers/char/rio/riotty.c)0
-rw-r--r--drivers/staging/generic_serial/rio/route.h (renamed from drivers/char/rio/route.h)0
-rw-r--r--drivers/staging/generic_serial/rio/rup.h (renamed from drivers/char/rio/rup.h)0
-rw-r--r--drivers/staging/generic_serial/rio/unixrup.h (renamed from drivers/char/rio/unixrup.h)0
-rw-r--r--drivers/staging/generic_serial/ser_a2232.c (renamed from drivers/char/ser_a2232.c)6
-rw-r--r--drivers/staging/generic_serial/ser_a2232.h (renamed from drivers/char/ser_a2232.h)0
-rw-r--r--drivers/staging/generic_serial/ser_a2232fw.ax (renamed from drivers/char/ser_a2232fw.ax)0
-rw-r--r--drivers/staging/generic_serial/ser_a2232fw.h (renamed from drivers/char/ser_a2232fw.h)0
-rw-r--r--drivers/staging/generic_serial/sx.c (renamed from drivers/char/sx.c)8
-rw-r--r--drivers/staging/generic_serial/sx.h (renamed from drivers/char/sx.h)0
-rw-r--r--drivers/staging/generic_serial/sxboards.h (renamed from drivers/char/sxboards.h)0
-rw-r--r--drivers/staging/generic_serial/sxwindow.h (renamed from drivers/char/sxwindow.h)0
-rw-r--r--drivers/staging/generic_serial/vme_scc.c (renamed from drivers/char/vme_scc.c)4
-rw-r--r--drivers/staging/quatech_usb2/quatech_usb2.c6
-rw-r--r--drivers/staging/serqt_usb2/serqt_usb2.c13
-rw-r--r--drivers/staging/tty/Kconfig87
-rw-r--r--drivers/staging/tty/Makefile7
-rw-r--r--drivers/staging/tty/TODO6
-rw-r--r--drivers/staging/tty/cd1865.h (renamed from drivers/char/cd1865.h)0
-rw-r--r--drivers/staging/tty/digi1.h (renamed from drivers/char/digi1.h)0
-rw-r--r--drivers/staging/tty/digiFep1.h (renamed from drivers/char/digiFep1.h)0
-rw-r--r--drivers/staging/tty/digiPCI.h (renamed from drivers/char/digiPCI.h)0
-rw-r--r--drivers/staging/tty/epca.c (renamed from drivers/char/epca.c)16
-rw-r--r--drivers/staging/tty/epca.h (renamed from drivers/char/epca.h)0
-rw-r--r--drivers/staging/tty/epcaconfig.h (renamed from drivers/char/epcaconfig.h)0
-rw-r--r--drivers/staging/tty/ip2/Makefile (renamed from drivers/char/ip2/Makefile)0
-rw-r--r--drivers/staging/tty/ip2/i2cmd.c (renamed from drivers/char/ip2/i2cmd.c)0
-rw-r--r--drivers/staging/tty/ip2/i2cmd.h (renamed from drivers/char/ip2/i2cmd.h)0
-rw-r--r--drivers/staging/tty/ip2/i2ellis.c (renamed from drivers/char/ip2/i2ellis.c)0
-rw-r--r--drivers/staging/tty/ip2/i2ellis.h (renamed from drivers/char/ip2/i2ellis.h)0
-rw-r--r--drivers/staging/tty/ip2/i2hw.h (renamed from drivers/char/ip2/i2hw.h)0
-rw-r--r--drivers/staging/tty/ip2/i2lib.c (renamed from drivers/char/ip2/i2lib.c)0
-rw-r--r--drivers/staging/tty/ip2/i2lib.h (renamed from drivers/char/ip2/i2lib.h)0
-rw-r--r--drivers/staging/tty/ip2/i2pack.h (renamed from drivers/char/ip2/i2pack.h)0
-rw-r--r--drivers/staging/tty/ip2/ip2.h (renamed from drivers/char/ip2/ip2.h)0
-rw-r--r--drivers/staging/tty/ip2/ip2ioctl.h (renamed from drivers/char/ip2/ip2ioctl.h)0
-rw-r--r--drivers/staging/tty/ip2/ip2main.c (renamed from drivers/char/ip2/ip2main.c)12
-rw-r--r--drivers/staging/tty/ip2/ip2trace.h (renamed from drivers/char/ip2/ip2trace.h)0
-rw-r--r--drivers/staging/tty/ip2/ip2types.h (renamed from drivers/char/ip2/ip2types.h)0
-rw-r--r--drivers/staging/tty/istallion.c (renamed from drivers/char/istallion.c)8
-rw-r--r--drivers/staging/tty/riscom8.c (renamed from drivers/char/riscom8.c)8
-rw-r--r--drivers/staging/tty/riscom8.h (renamed from drivers/char/riscom8.h)0
-rw-r--r--drivers/staging/tty/riscom8_reg.h (renamed from drivers/char/riscom8_reg.h)0
-rw-r--r--drivers/staging/tty/serial167.c (renamed from drivers/char/serial167.c)7
-rw-r--r--drivers/staging/tty/specialix.c (renamed from drivers/char/specialix.c)6
-rw-r--r--drivers/staging/tty/specialix_io8.h (renamed from drivers/char/specialix_io8.h)0
-rw-r--r--drivers/staging/tty/stallion.c (renamed from drivers/char/stallion.c)9
-rw-r--r--drivers/tty/Kconfig321
-rw-r--r--drivers/tty/Makefile15
-rw-r--r--drivers/tty/amiserial.c (renamed from drivers/char/amiserial.c)8
-rw-r--r--drivers/tty/bfin_jtag_comm.c (renamed from drivers/char/bfin_jtag_comm.c)0
-rw-r--r--drivers/tty/cyclades.c (renamed from drivers/char/cyclades.c)6
-rw-r--r--drivers/tty/hvc/Kconfig105
-rw-r--r--drivers/tty/hvc/Makefile1
-rw-r--r--drivers/tty/hvc/hvc_bfin_jtag.c105
-rw-r--r--drivers/tty/hvc/hvc_dcc.c43
-rw-r--r--drivers/tty/hvc/hvsi.c6
-rw-r--r--drivers/tty/ipwireless/Makefile (renamed from drivers/char/pcmcia/ipwireless/Makefile)0
-rw-r--r--drivers/tty/ipwireless/hardware.c (renamed from drivers/char/pcmcia/ipwireless/hardware.c)0
-rw-r--r--drivers/tty/ipwireless/hardware.h (renamed from drivers/char/pcmcia/ipwireless/hardware.h)0
-rw-r--r--drivers/tty/ipwireless/main.c (renamed from drivers/char/pcmcia/ipwireless/main.c)0
-rw-r--r--drivers/tty/ipwireless/main.h (renamed from drivers/char/pcmcia/ipwireless/main.h)0
-rw-r--r--drivers/tty/ipwireless/network.c (renamed from drivers/char/pcmcia/ipwireless/network.c)0
-rw-r--r--drivers/tty/ipwireless/network.h (renamed from drivers/char/pcmcia/ipwireless/network.h)0
-rw-r--r--drivers/tty/ipwireless/setup_protocol.h (renamed from drivers/char/pcmcia/ipwireless/setup_protocol.h)0
-rw-r--r--drivers/tty/ipwireless/tty.c (renamed from drivers/char/pcmcia/ipwireless/tty.c)8
-rw-r--r--drivers/tty/ipwireless/tty.h (renamed from drivers/char/pcmcia/ipwireless/tty.h)0
-rw-r--r--drivers/tty/isicom.c (renamed from drivers/char/isicom.c)8
-rw-r--r--drivers/tty/moxa.c (renamed from drivers/char/moxa.c)10
-rw-r--r--drivers/tty/moxa.h (renamed from drivers/char/moxa.h)0
-rw-r--r--drivers/tty/mxser.c (renamed from drivers/char/mxser.c)6
-rw-r--r--drivers/tty/mxser.h (renamed from drivers/char/mxser.h)0
-rw-r--r--drivers/tty/n_gsm.c9
-rw-r--r--drivers/tty/nozomi.c (renamed from drivers/char/nozomi.c)10
-rw-r--r--drivers/tty/pty.c4
-rw-r--r--drivers/tty/rocket.c (renamed from drivers/char/rocket.c)8
-rw-r--r--drivers/tty/rocket.h (renamed from drivers/char/rocket.h)0
-rw-r--r--drivers/tty/rocket_int.h (renamed from drivers/char/rocket_int.h)0
-rw-r--r--drivers/tty/serial/68328serial.c25
-rw-r--r--drivers/tty/serial/68328serial.h1
-rw-r--r--drivers/tty/serial/68360serial.c6
-rw-r--r--drivers/tty/serial/8250.c33
-rw-r--r--drivers/tty/serial/Kconfig31
-rw-r--r--drivers/tty/serial/Makefile2
-rw-r--r--drivers/tty/serial/altera_jtaguart.c85
-rw-r--r--drivers/tty/serial/altera_uart.c22
-rw-r--r--drivers/tty/serial/atmel_serial.c16
-rw-r--r--drivers/tty/serial/bfin_sport_uart.c2
-rw-r--r--drivers/tty/serial/crisv10.c7
-rw-r--r--drivers/tty/serial/ifx6x60.c68
-rw-r--r--drivers/tty/serial/ifx6x60.h6
-rw-r--r--drivers/tty/serial/mfd.c73
-rw-r--r--drivers/tty/serial/mrst_max3110.c2
-rw-r--r--drivers/tty/serial/msm_serial_hs.c1880
-rw-r--r--drivers/tty/serial/msm_smd_tty.c236
-rw-r--r--drivers/tty/serial/of_serial.c18
-rw-r--r--drivers/tty/serial/omap-serial.c11
-rw-r--r--drivers/tty/serial/pch_uart.c329
-rw-r--r--drivers/tty/serial/serial_core.c22
-rw-r--r--drivers/tty/synclink.c (renamed from drivers/char/synclink.c)13
-rw-r--r--drivers/tty/synclink_gt.c (renamed from drivers/char/synclink_gt.c)19
-rw-r--r--drivers/tty/synclinkmp.c (renamed from drivers/char/synclinkmp.c)17
-rw-r--r--drivers/tty/tty_audit.c4
-rw-r--r--drivers/tty/tty_io.c22
-rw-r--r--drivers/tty/tty_ioctl.c14
-rw-r--r--drivers/tty/tty_ldisc.c17
-rw-r--r--drivers/tty/vt/keyboard.c5
-rw-r--r--drivers/tty/vt/vc_screen.c110
-rw-r--r--drivers/tty/vt/vt.c27
-rw-r--r--drivers/tty/vt/vt_ioctl.c12
-rw-r--r--drivers/usb/class/cdc-acm.c6
-rw-r--r--drivers/usb/serial/ark3116.c6
-rw-r--r--drivers/usb/serial/belkin_sa.c8
-rw-r--r--drivers/usb/serial/ch341.c7
-rw-r--r--drivers/usb/serial/cp210x.c19
-rw-r--r--drivers/usb/serial/cypress_m8.c12
-rw-r--r--drivers/usb/serial/digi_acceleport.c14
-rw-r--r--drivers/usb/serial/ftdi_sio.c12
-rw-r--r--drivers/usb/serial/io_edgeport.c12
-rw-r--r--drivers/usb/serial/io_ti.c6
-rw-r--r--drivers/usb/serial/iuu_phoenix.c4
-rw-r--r--drivers/usb/serial/keyspan.c4
-rw-r--r--drivers/usb/serial/keyspan.h5
-rw-r--r--drivers/usb/serial/keyspan_pda.c4
-rw-r--r--drivers/usb/serial/kl5kusb105.c8
-rw-r--r--drivers/usb/serial/kobil_sct.c12
-rw-r--r--drivers/usb/serial/mct_u232.c8
-rw-r--r--drivers/usb/serial/mos7720.c8
-rw-r--r--drivers/usb/serial/mos7840.c6
-rw-r--r--drivers/usb/serial/opticon.c4
-rw-r--r--drivers/usb/serial/oti6858.c12
-rw-r--r--drivers/usb/serial/pl2303.c6
-rw-r--r--drivers/usb/serial/sierra.c4
-rw-r--r--drivers/usb/serial/spcp8x5.c6
-rw-r--r--drivers/usb/serial/ssu100.c6
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c14
-rw-r--r--drivers/usb/serial/usb-serial.c12
-rw-r--r--drivers/usb/serial/usb-wwan.h6
-rw-r--r--drivers/usb/serial/usb_wwan.c6
-rw-r--r--drivers/usb/serial/whiteheat.c12
199 files changed, 3726 insertions, 1304 deletions
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 6a160c17ea9..bd34406faaa 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -51,32 +51,32 @@ struct ath_struct {
static int ath_wakeup_ar3k(struct tty_struct *tty)
{
- struct termios settings;
- int status = tty->driver->ops->tiocmget(tty, NULL);
+ struct ktermios ktermios;
+ int status = tty->driver->ops->tiocmget(tty);
if (status & TIOCM_CTS)
return status;
/* Disable Automatic RTSCTS */
- n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings);
- settings.c_cflag &= ~CRTSCTS;
- n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings);
+ memcpy(&ktermios, tty->termios, sizeof(ktermios));
+ ktermios.c_cflag &= ~CRTSCTS;
+ tty_set_termios(tty, &ktermios);
/* Clear RTS first */
- status = tty->driver->ops->tiocmget(tty, NULL);
- tty->driver->ops->tiocmset(tty, NULL, 0x00, TIOCM_RTS);
+ status = tty->driver->ops->tiocmget(tty);
+ tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
mdelay(20);
/* Set RTS, wake up board */
- status = tty->driver->ops->tiocmget(tty, NULL);
- tty->driver->ops->tiocmset(tty, NULL, TIOCM_RTS, 0x00);
+ status = tty->driver->ops->tiocmget(tty);
+ tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
mdelay(20);
- status = tty->driver->ops->tiocmget(tty, NULL);
+ status = tty->driver->ops->tiocmget(tty);
- n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings);
- settings.c_cflag |= CRTSCTS;
- n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings);
+ /* Disable Automatic RTSCTS */
+ ktermios.c_cflag |= CRTSCTS;
+ status = tty_set_termios(tty, &ktermios);
return status;
}
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b7980a83ce2..04f8b2d083c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -4,89 +4,7 @@
menu "Character devices"
-config VT
- bool "Virtual terminal" if EXPERT
- depends on !S390
- select INPUT
- default y
- ---help---
- If you say Y here, you will get support for terminal devices with
- display and keyboard devices. These are called "virtual" because you
- can run several virtual terminals (also called virtual consoles) on
- one physical terminal. This is rather useful, for example one
- virtual terminal can collect system messages and warnings, another
- one can be used for a text-mode user session, and a third could run
- an X session, all in parallel. Switching between virtual terminals
- is done with certain key combinations, usually Alt-<function key>.
-
- The setterm command ("man setterm") can be used to change the
- properties (such as colors or beeping) of a virtual terminal. The
- man page console_codes(4) ("man console_codes") contains the special
- character sequences that can be used to change those properties
- directly. The fonts used on virtual terminals can be changed with
- the setfont ("man setfont") command and the key bindings are defined
- with the loadkeys ("man loadkeys") command.
-
- You need at least one virtual terminal device in order to make use
- of your keyboard and monitor. Therefore, only people configuring an
- embedded system would want to say N here in order to save some
- memory; the only way to log into such a system is then via a serial
- or network connection.
-
- If unsure, say Y, or else you won't be able to do much with your new
- shiny Linux system :-)
-
-config CONSOLE_TRANSLATIONS
- depends on VT
- default y
- bool "Enable character translations in console" if EXPERT
- ---help---
- This enables support for font mapping and Unicode translation
- on virtual consoles.
-
-config VT_CONSOLE
- bool "Support for console on virtual terminal" if EXPERT
- depends on VT
- default y
- ---help---
- The system console is the device which receives all kernel messages
- and warnings and which allows logins in single user mode. If you
- answer Y here, a virtual terminal (the device used to interact with
- a physical terminal) can be used as system console. This is the most
- common mode of operations, so you should say Y here unless you want
- the kernel messages be output only to a serial port (in which case
- you should say Y to "Console on serial port", below).
-
- If you do say Y here, by default the currently visible virtual
- terminal (/dev/tty0) will be used as system console. You can change
- that with a kernel command line option such as "console=tty3" which
- would use the third virtual terminal as system console. (Try "man
- bootparam" or see the documentation of your boot loader (lilo or
- loadlin) about how to pass options to the kernel at boot time.)
-
- If unsure, say Y.
-
-config HW_CONSOLE
- bool
- depends on VT && !S390 && !UML
- default y
-
-config VT_HW_CONSOLE_BINDING
- bool "Support for binding and unbinding console drivers"
- depends on HW_CONSOLE
- default n
- ---help---
- The virtual terminal is the device that interacts with the physical
- terminal through console drivers. On these systems, at least one
- console driver is loaded. In other configurations, additional console
- drivers may be enabled, such as the framebuffer console. If more than
- 1 console driver is enabled, setting this to 'y' will allow you to
- select the console driver that will serve as the backend for the
- virtual terminals.
-
- See <file:Documentation/console/console.txt> for more
- information. For framebuffer console users, please refer to
- <file:Documentation/fb/fbcon.txt>.
+source "drivers/tty/Kconfig"
config DEVKMEM
bool "/dev/kmem virtual device support"
@@ -97,253 +15,6 @@ config DEVKMEM
kind of kernel debugging operations.
When in doubt, say "N".
-config BFIN_JTAG_COMM
- tristate "Blackfin JTAG Communication"
- depends on BLACKFIN
- help
- Add support for emulating a TTY device over the Blackfin JTAG.
-
- To compile this driver as a module, choose M here: the
- module will be called bfin_jtag_comm.
-
-config BFIN_JTAG_COMM_CONSOLE
- bool "Console on Blackfin JTAG"
- depends on BFIN_JTAG_COMM=y
-
-config SERIAL_NONSTANDARD
- bool "Non-standard serial port support"
- depends on HAS_IOMEM
- ---help---
- Say Y here if you have any non-standard serial boards -- boards
- which aren't supported using the standard "dumb" serial driver.
- This includes intelligent serial boards such as Cyclades,
- Digiboards, etc. These are usually used for systems that need many
- serial ports because they serve many terminals or dial-in
- connections.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about non-standard serial boards.
-
- Most people can say N here.
-
-config COMPUTONE
- tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- ---help---
- This driver supports the entire family of Intelliport II/Plus
- controllers with the exception of the MicroChannel controllers and
- products previous to the Intelliport II. These are multiport cards,
- which give you many serial ports. You would need something like this
- to connect more than two modems to your Linux box, for instance in
- order to become a dial-in server. If you have a card like that, say
- Y here and read <file:Documentation/serial/computone.txt>.
-
- To compile this driver as module, choose M here: the
- module will be called ip2.
-
-config ROCKETPORT
- tristate "Comtrol RocketPort support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- help
- This driver supports Comtrol RocketPort and RocketModem PCI boards.
- These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
- modems. For information about the RocketPort/RocketModem boards
- and this driver read <file:Documentation/serial/rocket.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called rocket.
-
- If you want to compile this driver into the kernel, say Y here. If
- you don't have a Comtrol RocketPort/RocketModem card installed, say N.
-
-config CYCLADES
- tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD && (PCI || ISA)
- select FW_LOADER
- ---help---
- This driver supports Cyclades Z and Y multiserial boards.
- You would need something like this to connect more than two modems to
- your Linux box, for instance in order to become a dial-in server.
-
- For information about the Cyclades-Z card, read
- <file:Documentation/serial/README.cycladesZ>.
-
- To compile this driver as a module, choose M here: the
- module will be called cyclades.
-
- If you haven't heard about it, it's safe to say N.
-
-config CYZ_INTR
- bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
- depends on EXPERIMENTAL && CYCLADES
- help
- The Cyclades-Z family of multiport cards allows 2 (two) driver op
- modes: polling and interrupt. In polling mode, the driver will check
- the status of the Cyclades-Z ports every certain amount of time
- (which is called polling cycle and is configurable). In interrupt
- mode, it will use an interrupt line (IRQ) in order to check the
- status of the Cyclades-Z ports. The default op mode is polling. If
- unsure, say N.
-
-config DIGIEPCA
- tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- ---help---
- This is a driver for Digi International's Xx, Xeve, and Xem series
- of cards which provide multiple serial ports. You would need
- something like this to connect more than two modems to your Linux
- box, for instance in order to become a dial-in server. This driver
- supports the original PC (ISA) boards as well as PCI, and EISA. If
- you have a card like this, say Y here and read the file
- <file:Documentation/serial/digiepca.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called epca.
-
-config MOXA_INTELLIO
- tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- select FW_LOADER
- help
- Say Y here if you have a Moxa Intellio multiport serial card.
-
- To compile this driver as a module, choose M here: the
- module will be called moxa.
-
-config MOXA_SMARTIO
- tristate "Moxa SmartIO support v. 2.0"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
- help
- Say Y here if you have a Moxa SmartIO multiport serial card and/or
- want to help develop a new version of this driver.
-
- This is upgraded (1.9.1) driver from original Moxa drivers with
- changes finally resulting in PCI probing.
-
- This driver can also be built as a module. The module will be called
- mxser. If you want to do that, say M here.
-
-config ISI
- tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD && PCI
- select FW_LOADER
- help
- This is a driver for the Multi-Tech cards which provide several
- serial ports. The driver is experimental and can currently only be
- built as a module. The module will be called isicom.
- If you want to do that, choose M here.
-
-config SYNCLINK
- tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
- help
- Provides support for the SyncLink ISA and PCI multiprotocol serial
- adapters. These adapters support asynchronous and HDLC bit
- synchronous communication up to 10Mbps (PCI adapter).
-
- This driver can only be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclink. If you want to do that, say M
- here.
-
-config SYNCLINKMP
- tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Enable support for the SyncLink Multiport (2 or 4 ports)
- serial adapter, running asynchronous and HDLC communications up
- to 2.048Mbps. Each ports is independently selectable for
- RS-232, V.35, RS-449, RS-530, and X.21
-
- This driver may be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclinkmp. If you want to do that, say M
- here.
-
-config SYNCLINK_GT
- tristate "SyncLink GT/AC support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Support for SyncLink GT and SyncLink AC families of
- synchronous and asynchronous serial adapters
- manufactured by Microgate Systems, Ltd. (www.microgate.com)
-
-config N_HDLC
- tristate "HDLC line discipline support"
- depends on SERIAL_NONSTANDARD
- help
- Allows synchronous HDLC communications with tty device drivers that
- support synchronous HDLC such as the Microgate SyncLink adapter.
-
- This driver can be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called n_hdlc. If you want to do that, say M
- here.
-
-config N_GSM
- tristate "GSM MUX line discipline support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- depends on NET
- help
- This line discipline provides support for the GSM MUX protocol and
- presents the mux as a set of 61 individual tty devices.
-
-config RISCOM8
- tristate "SDL RISCom/8 card support"
- depends on SERIAL_NONSTANDARD
- help
- This is a driver for the SDL Communications RISCom/8 multiport card,
- which gives you many serial ports. You would need something like
- this to connect more than two modems to your Linux box, for instance
- in order to become a dial-in server. If you have a card like that,
- say Y here and read the file <file:Documentation/serial/riscom8.txt>.
-
- Also it's possible to say M here and compile this driver as kernel
- loadable module; the module will be called riscom8.
-
-config SPECIALIX
- tristate "Specialix IO8+ card support"
- depends on SERIAL_NONSTANDARD
- help
- This is a driver for the Specialix IO8+ multiport card (both the
- ISA and the PCI version) which gives you many serial ports. You
- would need something like this to connect more than two modems to
- your Linux box, for instance in order to become a dial-in server.
-
- If you have a card like that, say Y here and read the file
- <file:Documentation/serial/specialix.txt>. Also it's possible to say
- M here and compile this driver as kernel loadable module which will be
- called specialix.
-
-config SX
- tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
- help
- This is a driver for the SX and SI multiport serial cards.
- Please read the file <file:Documentation/serial/sx.txt> for details.
-
- This driver can only be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called sx. If you want to do that, say M here.
-
-config RIO
- tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && BROKEN
- help
- This is a driver for the Specialix RIO, a smart serial card which
- drives an outboard box that can support up to 128 ports. Product
- information is at <http://www.perle.com/support/documentation.html#multiport>.
- There are both ISA and PCI versions.
-
-config RIO_OLDPCI
- bool "Support really old RIO/PCI cards"
- depends on RIO
- help
- Older RIO PCI cards need some initialization-time configuration to
- determine the IRQ and some control addresses. If you have a RIO and
- this doesn't seem to work, try setting this to Y.
-
config STALDRV
bool "Stallion multiport serial support"
depends on SERIAL_NONSTANDARD
@@ -356,54 +27,6 @@ config STALDRV
in this case. If you have never heard about all this, it's safe to
say N.
-config STALLION
- tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV && (ISA || EISA || PCI)
- help
- If you have an EasyIO or EasyConnection 8/32 multiport Stallion
- card, then this is for you; say Y. Make sure to read
- <file:Documentation/serial/stallion.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called stallion.
-
-config ISTALLION
- tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV && (ISA || EISA || PCI)
- help
- If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
- serial multiport card, say Y here. Make sure to read
- <file:Documentation/serial/stallion.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called istallion.
-
-config NOZOMI
- tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
- depends on PCI && EXPERIMENTAL
- help
- If you have a HSDPA driver Broadband Wireless Data Card -
- Globe Trotter PCMCIA card, say Y here.
-
- To compile this driver as a module, choose M here, the module
- will be called nozomi.
-
-config A2232
- tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ZORRO && BROKEN
- ---help---
- This option supports the 2232 7-port serial card shipped with the
- Amiga 2000 and other Zorro-bus machines, dating from 1989. At
- a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
- each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
- ports were connected with 8 pin DIN connectors on the card bracket,
- for which 8 pin to DB25 adapters were supplied. The card also had
- jumpers internally to toggle various pinning configurations.
-
- This driver can be built as a module; but then "generic_serial"
- will also be built as a module. This has to be loaded before
- "ser_a2232". If you want to do this, answer M here.
-
config SGI_SNSC
bool "SGI Altix system controller communication support"
depends on (IA64_SGI_SN2 || IA64_GENERIC)
@@ -428,71 +51,6 @@ config SGI_MBCS
source "drivers/tty/serial/Kconfig"
-config UNIX98_PTYS
- bool "Unix98 PTY support" if EXPERT
- default y
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- All modern Linux systems use the Unix98 ptys. Say Y unless
- you're on an embedded system and want to conserve memory.
-
-config DEVPTS_MULTIPLE_INSTANCES
- bool "Support multiple instances of devpts"
- depends on UNIX98_PTYS
- default n
- ---help---
- Enable support for multiple instances of devpts filesystem.
- If you want to have isolated PTY namespaces (eg: in containers),
- say Y here. Otherwise, say N. If enabled, each mount of devpts
- filesystem with the '-o newinstance' option will create an
- independent PTY namespace.
-
-config LEGACY_PTYS
- bool "Legacy (BSD) PTY support"
- default y
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx
- for masters and /dev/ttyxx for slaves of pseudo
- terminals. This scheme has a number of problems, including
- security. This option enables these legacy devices; on most
- systems, it is safe to say N.
-
-
-config LEGACY_PTY_COUNT
- int "Maximum number of legacy PTY in use"
- depends on LEGACY_PTYS
- range 0 256
- default "256"
- ---help---
- The maximum number of legacy PTYs that can be used at any one time.
- The default is 256, and should be more than enough. Embedded
- systems may want to reduce this to save memory.
-
- When not in use, each legacy PTY occupies 12 bytes on 32-bit
- architectures and 24 bytes on 64-bit architectures.
-
config TTY_PRINTK
bool "TTY driver to output user messages via printk"
depends on EXPERT
@@ -612,84 +170,7 @@ config PPDEV
If unsure, say N.
-config HVC_DRIVER
- bool
- help
- Generic "hypervisor virtual console" infrastructure for various
- hypervisors (pSeries, iSeries, Xen, lguest).
- It will automatically be selected if one of the back-end console drivers
- is selected.
-
-config HVC_IRQ
- bool
-
-config HVC_CONSOLE
- bool "pSeries Hypervisor Virtual Console support"
- depends on PPC_PSERIES
- select HVC_DRIVER
- select HVC_IRQ
- help
- pSeries machines when partitioned support a hypervisor virtual
- console. This driver allows each pSeries partition to have a console
- which is accessed via the HMC.
-
-config HVC_ISERIES
- bool "iSeries Hypervisor Virtual Console support"
- depends on PPC_ISERIES
- default y
- select HVC_DRIVER
- select HVC_IRQ
- select VIOPATH
- help
- iSeries machines support a hypervisor virtual console.
-
-config HVC_RTAS
- bool "IBM RTAS Console support"
- depends on PPC_RTAS
- select HVC_DRIVER
- help
- IBM Console device driver which makes use of RTAS
-
-config HVC_BEAT
- bool "Toshiba's Beat Hypervisor Console support"
- depends on PPC_CELLEB
- select HVC_DRIVER
- help
- Toshiba's Cell Reference Set Beat Console device driver
-
-config HVC_IUCV
- bool "z/VM IUCV Hypervisor console support (VM only)"
- depends on S390
- select HVC_DRIVER
- select IUCV
- default y
- help
- This driver provides a Hypervisor console (HVC) back-end to access
- a Linux (console) terminal via a z/VM IUCV communication path.
-
-config HVC_XEN
- bool "Xen Hypervisor Console support"
- depends on XEN
- select HVC_DRIVER
- select HVC_IRQ
- default y
- help
- Xen virtual console device driver
-
-config HVC_UDBG
- bool "udbg based fake hypervisor console"
- depends on PPC && EXPERIMENTAL
- select HVC_DRIVER
- default n
-
-config HVC_DCC
- bool "ARM JTAG DCC console"
- depends on ARM
- select HVC_DRIVER
- help
- This console uses the JTAG DCC on ARM to create a console under the HVC
- driver. This console is used through a JTAG only on ARM. If you don't have
- a JTAG then you probably don't want this option.
+source "drivers/tty/hvc/Kconfig"
config VIRTIO_CONSOLE
tristate "Virtio console"
@@ -707,23 +188,6 @@ config VIRTIO_CONSOLE
the port which can be used by udev scripts to create a
symlink to the device.
-config HVCS
- tristate "IBM Hypervisor Virtual Console Server support"
- depends on PPC_PSERIES && HVC_CONSOLE
- help
- Partitionable IBM Power5 ppc64 machines allow hosting of
- firmware virtual consoles from one Linux partition by
- another Linux partition. This driver allows console data
- from Linux partitions to be accessed through TTY device
- interfaces in the device tree of a Linux partition running
- this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called hvcs. Additionally, this module
- will depend on arch specific APIs exported from hvcserver.ko
- which will also be compiled when this driver is built as a
- module.
-
config IBM_BSR
tristate "IBM POWER Barrier Synchronization Register support"
depends on PPC_PSERIES
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 8238f89f73c..057f65452e7 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -5,31 +5,7 @@
obj-y += mem.o random.o
obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o
obj-y += misc.o
-obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
-obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_ROCKETPORT) += rocket.o
-obj-$(CONFIG_SERIAL167) += serial167.o
-obj-$(CONFIG_CYCLADES) += cyclades.o
-obj-$(CONFIG_STALLION) += stallion.o
-obj-$(CONFIG_ISTALLION) += istallion.o
-obj-$(CONFIG_NOZOMI) += nozomi.o
-obj-$(CONFIG_DIGIEPCA) += epca.o
-obj-$(CONFIG_SPECIALIX) += specialix.o
-obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
-obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
-obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
-obj-$(CONFIG_COMPUTONE) += ip2/
-obj-$(CONFIG_RISCOM8) += riscom8.o
-obj-$(CONFIG_ISI) += isicom.o
-obj-$(CONFIG_SYNCLINK) += synclink.o
-obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
-obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
-obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
-obj-$(CONFIG_SX) += sx.o generic_serial.o
-obj-$(CONFIG_RIO) += rio/ generic_serial.o
obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
obj-$(CONFIG_RAW_DRIVER) += raw.o
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile
index be8f287aa39..0aae20985d5 100644
--- a/drivers/char/pcmcia/Makefile
+++ b/drivers/char/pcmcia/Makefile
@@ -4,8 +4,6 @@
# Makefile for the Linux PCMCIA char device drivers.
#
-obj-y += ipwireless/
-
obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o
obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index eaa41992fbe..beca80bb9bd 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -418,9 +418,9 @@ static void bh_status(MGSLPC_INFO *info);
/*
* ioctl handlers
*/
-static int tiocmget(struct tty_struct *tty, struct file *file);
-static int tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear);
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
@@ -2114,7 +2114,7 @@ static int modem_input_wait(MGSLPC_INFO *info,int arg)
/* return the state of the serial control and status signals
*/
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned int result;
@@ -2139,7 +2139,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
/* set modem control signals (DTR/RTS)
*/
-static int tiocmset(struct tty_struct *tty, struct file *file,
+static int tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
@@ -2222,13 +2222,12 @@ static int mgslpc_get_icount(struct tty_struct *tty,
* Arguments:
*
* tty pointer to tty instance data
- * file pointer to associated file object for device
* cmd IOCTL command code
* arg command argument/context
*
* Return Value: 0 if success, otherwise error code
*/
-static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
+static int mgslpc_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index c40c1612c8a..a1f68af4ccf 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -144,7 +144,7 @@ static int tpk_write_room(struct tty_struct *tty)
/*
* TTY operations ioctl function.
*/
-static int tpk_ioctl(struct tty_struct *tty, struct file *file,
+static int tpk_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct ttyprintk_port *tpkp = tty->driver_data;
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index f80a7c48a35..0d708836703 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1219,16 +1219,10 @@ static int capinc_tty_chars_in_buffer(struct tty_struct *tty)
return mp->outbytes;
}
-static int capinc_tty_ioctl(struct tty_struct *tty, struct file * file,
+static int capinc_tty_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
- int error = 0;
- switch (cmd) {
- default:
- error = n_tty_ioctl_helper(tty, file, cmd, arg);
- break;
- }
- return error;
+ return -ENOIOCTLCMD;
}
static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index bb710d16a52..59de638225f 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -115,15 +115,15 @@ static int if_config(struct cardstate *cs, int *arg)
static int if_open(struct tty_struct *tty, struct file *filp);
static void if_close(struct tty_struct *tty, struct file *filp);
-static int if_ioctl(struct tty_struct *tty, struct file *file,
+static int if_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static int if_write_room(struct tty_struct *tty);
static int if_chars_in_buffer(struct tty_struct *tty);
static void if_throttle(struct tty_struct *tty);
static void if_unthrottle(struct tty_struct *tty);
static void if_set_termios(struct tty_struct *tty, struct ktermios *old);
-static int if_tiocmget(struct tty_struct *tty, struct file *file);
-static int if_tiocmset(struct tty_struct *tty, struct file *file,
+static int if_tiocmget(struct tty_struct *tty);
+static int if_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int if_write(struct tty_struct *tty,
const unsigned char *buf, int count);
@@ -205,7 +205,7 @@ static void if_close(struct tty_struct *tty, struct file *filp)
module_put(cs->driver->owner);
}
-static int if_ioctl(struct tty_struct *tty, struct file *file,
+static int if_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct cardstate *cs;
@@ -280,7 +280,7 @@ static int if_ioctl(struct tty_struct *tty, struct file *file,
return retval;
}
-static int if_tiocmget(struct tty_struct *tty, struct file *file)
+static int if_tiocmget(struct tty_struct *tty)
{
struct cardstate *cs;
int retval;
@@ -303,7 +303,7 @@ static int if_tiocmget(struct tty_struct *tty, struct file *file)
return retval;
}
-static int if_tiocmset(struct tty_struct *tty, struct file *file,
+static int if_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct cardstate *cs;
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 0ef09d0eb96..86a5c4f7775 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -440,7 +440,7 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
if (!set && !clear)
return 0;
gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear);
- return tty->ops->tiocmset(tty, NULL, set, clear);
+ return tty->ops->tiocmset(tty, set, clear);
}
static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index c463162843b..3d88f15aa21 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1345,7 +1345,7 @@ isdn_tty_get_lsr_info(modem_info * info, uint __user * value)
static int
-isdn_tty_tiocmget(struct tty_struct *tty, struct file *file)
+isdn_tty_tiocmget(struct tty_struct *tty)
{
modem_info *info = (modem_info *) tty->driver_data;
u_char control, status;
@@ -1372,7 +1372,7 @@ isdn_tty_tiocmget(struct tty_struct *tty, struct file *file)
}
static int
-isdn_tty_tiocmset(struct tty_struct *tty, struct file *file,
+isdn_tty_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
modem_info *info = (modem_info *) tty->driver_data;
@@ -1413,8 +1413,7 @@ isdn_tty_tiocmset(struct tty_struct *tty, struct file *file,
}
static int
-isdn_tty_ioctl(struct tty_struct *tty, struct file *file,
- uint cmd, ulong arg)
+isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg)
{
modem_info *info = (modem_info *) tty->driver_data;
int retval;
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 98bffc471b1..380ba806495 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -27,6 +27,7 @@
#include <linux/mutex.h>
#include <linux/if_ether.h>
#include <linux/ctype.h>
+#include <linux/dmi.h>
#define PHUB_STATUS 0x00 /* Status Register offset */
#define PHUB_CONTROL 0x04 /* Control Register offset */
@@ -46,6 +47,17 @@
#define PCH_MINOR_NOS 1
#define CLKCFG_CAN_50MHZ 0x12000000
#define CLKCFG_CANCLK_MASK 0xFF000000
+#define CLKCFG_UART_MASK 0xFFFFFF
+
+/* CM-iTC */
+#define CLKCFG_UART_48MHZ (1 << 16)
+#define CLKCFG_BAUDDIV (2 << 20)
+#define CLKCFG_PLL2VCO (8 << 9)
+#define CLKCFG_UARTCLKSEL (1 << 18)
+
+/* Macros for ML7213 */
+#define PCI_VENDOR_ID_ROHM 0x10db
+#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A
/* Macros for ML7213 */
#define PCI_VENDOR_ID_ROHM 0x10db
@@ -618,6 +630,14 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
CLKCFG_CAN_50MHZ,
CLKCFG_CANCLK_MASK);
+ /* quirk for CM-iTC board */
+ if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+ pch_phub_read_modify_write_reg(chip,
+ (unsigned int)CLKCFG_REG_OFFSET,
+ CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV |
+ CLKCFG_PLL2VCO | CLKCFG_UARTCLKSEL,
+ CLKCFG_UART_MASK);
+
/* set the prefech value */
iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
/* set the interrupt delay value */
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index a0716967b7c..c8c9edb3d7c 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -956,7 +956,7 @@ static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
return 0;
}
-static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file)
+static int sdio_uart_tiocmget(struct tty_struct *tty)
{
struct sdio_uart_port *port = tty->driver_data;
int result;
@@ -970,7 +970,7 @@ static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
-static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
+static int sdio_uart_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct sdio_uart_port *port = tty->driver_data;
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index ee1dde52e8f..3352b2443e5 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -167,7 +167,7 @@ static int irtty_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
* let's be careful... Jean II
*/
IRDA_ASSERT(priv->tty->ops->tiocmset != NULL, return -1;);
- priv->tty->ops->tiocmset(priv->tty, NULL, set, clear);
+ priv->tty->ops->tiocmset(priv->tty, set, clear);
return 0;
}
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 6d83812603b..387ca43f26f 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -324,7 +324,7 @@ struct hso_device {
/* Prototypes */
/*****************************************************************************/
/* Serial driver functions */
-static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
+static int hso_serial_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static void ctrl_callback(struct urb *urb);
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
@@ -1335,7 +1335,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
/* done */
if (result)
- hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0);
+ hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
err_out:
mutex_unlock(&serial->parent->mutex);
return result;
@@ -1656,7 +1656,7 @@ static int hso_get_count(struct tty_struct *tty,
}
-static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
+static int hso_serial_tiocmget(struct tty_struct *tty)
{
int retval;
struct hso_serial *serial = get_serial_by_tty(tty);
@@ -1687,7 +1687,7 @@ static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
return retval;
}
-static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
+static int hso_serial_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
int val = 0;
@@ -1730,7 +1730,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
USB_CTRL_SET_TIMEOUT);
}
-static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
+static int hso_serial_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct hso_serial *serial = get_serial_by_tty(tty);
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c
index 515d9b8af01..1c65d1c3387 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/net/wan/pc300_tty.c
@@ -131,9 +131,8 @@ static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx);
static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char);
static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char);
-static int pc300_tiocmset(struct tty_struct *, struct file *,
- unsigned int, unsigned int);
-static int pc300_tiocmget(struct tty_struct *, struct file *);
+static int pc300_tiocmset(struct tty_struct *, unsigned int, unsigned int);
+static int pc300_tiocmget(struct tty_struct *);
/* functions called by PC300 driver */
void cpc_tty_init(pc300dev_t *dev);
@@ -543,7 +542,7 @@ static int cpc_tty_chars_in_buffer(struct tty_struct *tty)
return 0;
}
-static int pc300_tiocmset(struct tty_struct *tty, struct file *file,
+static int pc300_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
st_cpc_tty_area *cpc_tty;
@@ -570,7 +569,7 @@ static int pc300_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int pc300_tiocmget(struct tty_struct *tty, struct file *file)
+static int pc300_tiocmget(struct tty_struct *tty)
{
unsigned int result;
unsigned char status;
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index 5ad44daef73..80658819248 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -455,9 +455,7 @@ do_kdgkb_ioctl(struct kbd_data *kbd, struct kbsentry __user *u_kbs,
return 0;
}
-int
-kbd_ioctl(struct kbd_data *kbd, struct file *file,
- unsigned int cmd, unsigned long arg)
+int kbd_ioctl(struct kbd_data *kbd, unsigned int cmd, unsigned long arg)
{
void __user *argp;
unsigned int ct;
diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h
index 5ccfe9cf126..7e736aaeae6 100644
--- a/drivers/s390/char/keyboard.h
+++ b/drivers/s390/char/keyboard.h
@@ -36,7 +36,7 @@ void kbd_free(struct kbd_data *);
void kbd_ascebc(struct kbd_data *, unsigned char *);
void kbd_keycode(struct kbd_data *, unsigned int);
-int kbd_ioctl(struct kbd_data *, struct file *, unsigned int, unsigned long);
+int kbd_ioctl(struct kbd_data *, unsigned int, unsigned long);
/*
* Helper Functions.
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 911822db614..d33554df2b0 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -1718,9 +1718,8 @@ tty3270_wait_until_sent(struct tty_struct *tty, int timeout)
{
}
-static int
-tty3270_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int tty3270_ioctl(struct tty_struct *tty, unsigned int cmd,
+ unsigned long arg)
{
struct tty3270 *tp;
@@ -1729,13 +1728,12 @@ tty3270_ioctl(struct tty_struct *tty, struct file *file,
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
- return kbd_ioctl(tp->kbd, file, cmd, arg);
+ return kbd_ioctl(tp->kbd, cmd, arg);
}
#ifdef CONFIG_COMPAT
-static long
-tty3270_compat_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long tty3270_compat_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
{
struct tty3270 *tp;
@@ -1744,7 +1742,7 @@ tty3270_compat_ioctl(struct tty_struct *tty, struct file *file,
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
- return kbd_ioctl(tp->kbd, file, cmd, (unsigned long)compat_ptr(arg));
+ return kbd_ioctl(tp->kbd, cmd, (unsigned long)compat_ptr(arg));
}
#endif
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 5c8fcfc42c3..58e4a8e15a0 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -41,6 +41,10 @@ config STAGING_EXCLUDE_BUILD
if !STAGING_EXCLUDE_BUILD
+source "drivers/staging/tty/Kconfig"
+
+source "drivers/staging/generic_serial/Kconfig"
+
source "drivers/staging/et131x/Kconfig"
source "drivers/staging/slicoss/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index d5388631782..ff7372d25c9 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -3,6 +3,8 @@
# fix for build system bug...
obj-$(CONFIG_STAGING) += staging.o
+obj-y += tty/
+obj-y += generic_serial/
obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_VIDEO_GO7007) += go7007/
diff --git a/drivers/staging/generic_serial/Kconfig b/drivers/staging/generic_serial/Kconfig
new file mode 100644
index 00000000000..795daea3775
--- /dev/null
+++ b/drivers/staging/generic_serial/Kconfig
@@ -0,0 +1,45 @@
+config A2232
+ tristate "Commodore A2232 serial support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && ZORRO && BROKEN
+ ---help---
+ This option supports the 2232 7-port serial card shipped with the
+ Amiga 2000 and other Zorro-bus machines, dating from 1989. At
+ a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+ each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+ ports were connected with 8 pin DIN connectors on the card bracket,
+ for which 8 pin to DB25 adapters were supplied. The card also had
+ jumpers internally to toggle various pinning configurations.
+
+ This driver can be built as a module; but then "generic_serial"
+ will also be built as a module. This has to be loaded before
+ "ser_a2232". If you want to do this, answer M here.
+
+config SX
+ tristate "Specialix SX (and SI) card support"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
+ help
+ This is a driver for the SX and SI multiport serial cards.
+ Please read the file <file:Documentation/serial/sx.txt> for details.
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called sx. If you want to do that, say M here.
+
+config RIO
+ tristate "Specialix RIO system support"
+ depends on SERIAL_NONSTANDARD && BROKEN
+ help
+ This is a driver for the Specialix RIO, a smart serial card which
+ drives an outboard box that can support up to 128 ports. Product
+ information is at <http://www.perle.com/support/documentation.html#multiport>.
+ There are both ISA and PCI versions.
+
+config RIO_OLDPCI
+ bool "Support really old RIO/PCI cards"
+ depends on RIO
+ help
+ Older RIO PCI cards need some initialization-time configuration to
+ determine the IRQ and some control addresses. If you have a RIO and
+ this doesn't seem to work, try setting this to Y.
+
+
diff --git a/drivers/staging/generic_serial/Makefile b/drivers/staging/generic_serial/Makefile
new file mode 100644
index 00000000000..ffc90c8b013
--- /dev/null
+++ b/drivers/staging/generic_serial/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
+obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
+obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
+obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
+obj-$(CONFIG_SX) += sx.o generic_serial.o
+obj-$(CONFIG_RIO) += rio/ generic_serial.o
diff --git a/drivers/staging/generic_serial/TODO b/drivers/staging/generic_serial/TODO
new file mode 100644
index 00000000000..88756453ac6
--- /dev/null
+++ b/drivers/staging/generic_serial/TODO
@@ -0,0 +1,6 @@
+These are a few tty/serial drivers that either do not build,
+or work if they do build, or if they seem to work, are for obsolete
+hardware, or are full of unfixable races and no one uses them anymore.
+
+If no one steps up to adopt any of these drivers, they will be removed
+in the 2.6.41 release.
diff --git a/drivers/char/generic_serial.c b/drivers/staging/generic_serial/generic_serial.c
index 5954ee1dc95..466988dbc37 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/staging/generic_serial/generic_serial.c
@@ -566,9 +566,9 @@ void gs_close(struct tty_struct * tty, struct file * filp)
* line status register.
*/
- spin_lock_irqsave(&port->driver_lock, flags);
+ spin_lock(&port->driver_lock);
port->rd->disable_rx_interrupts (port);
- spin_unlock_irqrestore(&port->driver_lock, flags);
+ spin_unlock(&port->driver_lock);
spin_unlock_irqrestore(&port->port.lock, flags);
/* close has no way of returning "EINTR", so discard return value */
diff --git a/drivers/char/rio/Makefile b/drivers/staging/generic_serial/rio/Makefile
index 1661875883f..1661875883f 100644
--- a/drivers/char/rio/Makefile
+++ b/drivers/staging/generic_serial/rio/Makefile
diff --git a/drivers/char/rio/board.h b/drivers/staging/generic_serial/rio/board.h
index bdea633a907..bdea633a907 100644
--- a/drivers/char/rio/board.h
+++ b/drivers/staging/generic_serial/rio/board.h
diff --git a/drivers/char/rio/cirrus.h b/drivers/staging/generic_serial/rio/cirrus.h
index 5ab51679caa..5ab51679caa 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/staging/generic_serial/rio/cirrus.h
diff --git a/drivers/char/rio/cmdblk.h b/drivers/staging/generic_serial/rio/cmdblk.h
index 9ed4f861675..9ed4f861675 100644
--- a/drivers/char/rio/cmdblk.h
+++ b/drivers/staging/generic_serial/rio/cmdblk.h
diff --git a/drivers/char/rio/cmdpkt.h b/drivers/staging/generic_serial/rio/cmdpkt.h
index c1e7a279807..c1e7a279807 100644
--- a/drivers/char/rio/cmdpkt.h
+++ b/drivers/staging/generic_serial/rio/cmdpkt.h
diff --git a/drivers/char/rio/daemon.h b/drivers/staging/generic_serial/rio/daemon.h
index 4af90323fd0..4af90323fd0 100644
--- a/drivers/char/rio/daemon.h
+++ b/drivers/staging/generic_serial/rio/daemon.h
diff --git a/drivers/char/rio/errors.h b/drivers/staging/generic_serial/rio/errors.h
index bdb05234090..bdb05234090 100644
--- a/drivers/char/rio/errors.h
+++ b/drivers/staging/generic_serial/rio/errors.h
diff --git a/drivers/char/rio/func.h b/drivers/staging/generic_serial/rio/func.h
index 078d44f85e4..078d44f85e4 100644
--- a/drivers/char/rio/func.h
+++ b/drivers/staging/generic_serial/rio/func.h
diff --git a/drivers/char/rio/host.h b/drivers/staging/generic_serial/rio/host.h
index 78f24540c22..78f24540c22 100644
--- a/drivers/char/rio/host.h
+++ b/drivers/staging/generic_serial/rio/host.h
diff --git a/drivers/char/rio/link.h b/drivers/staging/generic_serial/rio/link.h
index f3bf11a04d4..f3bf11a04d4 100644
--- a/drivers/char/rio/link.h
+++ b/drivers/staging/generic_serial/rio/link.h
diff --git a/drivers/char/rio/linux_compat.h b/drivers/staging/generic_serial/rio/linux_compat.h
index 34c0d2899ef..34c0d2899ef 100644
--- a/drivers/char/rio/linux_compat.h
+++ b/drivers/staging/generic_serial/rio/linux_compat.h
diff --git a/drivers/char/rio/map.h b/drivers/staging/generic_serial/rio/map.h
index 8366978578c..8366978578c 100644
--- a/drivers/char/rio/map.h
+++ b/drivers/staging/generic_serial/rio/map.h
diff --git a/drivers/char/rio/param.h b/drivers/staging/generic_serial/rio/param.h
index 7e9b6283e8a..7e9b6283e8a 100644
--- a/drivers/char/rio/param.h
+++ b/drivers/staging/generic_serial/rio/param.h
diff --git a/drivers/char/rio/parmmap.h b/drivers/staging/generic_serial/rio/parmmap.h
index acc8fa439df..acc8fa439df 100644
--- a/drivers/char/rio/parmmap.h
+++ b/drivers/staging/generic_serial/rio/parmmap.h
diff --git a/drivers/char/rio/pci.h b/drivers/staging/generic_serial/rio/pci.h
index 6032f913595..6032f913595 100644
--- a/drivers/char/rio/pci.h
+++ b/drivers/staging/generic_serial/rio/pci.h
diff --git a/drivers/char/rio/phb.h b/drivers/staging/generic_serial/rio/phb.h
index a4c48ae4e36..a4c48ae4e36 100644
--- a/drivers/char/rio/phb.h
+++ b/drivers/staging/generic_serial/rio/phb.h
diff --git a/drivers/char/rio/pkt.h b/drivers/staging/generic_serial/rio/pkt.h
index a9458164f02..a9458164f02 100644
--- a/drivers/char/rio/pkt.h
+++ b/drivers/staging/generic_serial/rio/pkt.h
diff --git a/drivers/char/rio/port.h b/drivers/staging/generic_serial/rio/port.h
index 49cf6d15ee5..49cf6d15ee5 100644
--- a/drivers/char/rio/port.h
+++ b/drivers/staging/generic_serial/rio/port.h
diff --git a/drivers/char/rio/protsts.h b/drivers/staging/generic_serial/rio/protsts.h
index 8ab79401d3e..8ab79401d3e 100644
--- a/drivers/char/rio/protsts.h
+++ b/drivers/staging/generic_serial/rio/protsts.h
diff --git a/drivers/char/rio/rio.h b/drivers/staging/generic_serial/rio/rio.h
index 1bf36223a4e..1bf36223a4e 100644
--- a/drivers/char/rio/rio.h
+++ b/drivers/staging/generic_serial/rio/rio.h
diff --git a/drivers/char/rio/rio_linux.c b/drivers/staging/generic_serial/rio/rio_linux.c
index 5e33293d24e..5e33293d24e 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/staging/generic_serial/rio/rio_linux.c
diff --git a/drivers/char/rio/rio_linux.h b/drivers/staging/generic_serial/rio/rio_linux.h
index 7f26cd7c815..7f26cd7c815 100644
--- a/drivers/char/rio/rio_linux.h
+++ b/drivers/staging/generic_serial/rio/rio_linux.h
diff --git a/drivers/char/rio/rioboard.h b/drivers/staging/generic_serial/rio/rioboard.h
index 252230043c8..252230043c8 100644
--- a/drivers/char/rio/rioboard.h
+++ b/drivers/staging/generic_serial/rio/rioboard.h
diff --git a/drivers/char/rio/rioboot.c b/drivers/staging/generic_serial/rio/rioboot.c
index d956dd31600..d956dd31600 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/staging/generic_serial/rio/rioboot.c
diff --git a/drivers/char/rio/riocmd.c b/drivers/staging/generic_serial/rio/riocmd.c
index f121357e5af..f121357e5af 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/staging/generic_serial/rio/riocmd.c
diff --git a/drivers/char/rio/rioctrl.c b/drivers/staging/generic_serial/rio/rioctrl.c
index 780506326a7..780506326a7 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/staging/generic_serial/rio/rioctrl.c
diff --git a/drivers/char/rio/riodrvr.h b/drivers/staging/generic_serial/rio/riodrvr.h
index 0907e711b35..0907e711b35 100644
--- a/drivers/char/rio/riodrvr.h
+++ b/drivers/staging/generic_serial/rio/riodrvr.h
diff --git a/drivers/char/rio/rioinfo.h b/drivers/staging/generic_serial/rio/rioinfo.h
index 42ff1e79d96..42ff1e79d96 100644
--- a/drivers/char/rio/rioinfo.h
+++ b/drivers/staging/generic_serial/rio/rioinfo.h
diff --git a/drivers/char/rio/rioinit.c b/drivers/staging/generic_serial/rio/rioinit.c
index 24a282bb89d..24a282bb89d 100644
--- a/drivers/char/rio/rioinit.c
+++ b/drivers/staging/generic_serial/rio/rioinit.c
diff --git a/drivers/char/rio/riointr.c b/drivers/staging/generic_serial/rio/riointr.c
index 2e71aecae20..2e71aecae20 100644
--- a/drivers/char/rio/riointr.c
+++ b/drivers/staging/generic_serial/rio/riointr.c
diff --git a/drivers/char/rio/rioioctl.h b/drivers/staging/generic_serial/rio/rioioctl.h
index e8af5b30519..e8af5b30519 100644
--- a/drivers/char/rio/rioioctl.h
+++ b/drivers/staging/generic_serial/rio/rioioctl.h
diff --git a/drivers/char/rio/rioparam.c b/drivers/staging/generic_serial/rio/rioparam.c
index 6415f3f32a7..6415f3f32a7 100644
--- a/drivers/char/rio/rioparam.c
+++ b/drivers/staging/generic_serial/rio/rioparam.c
diff --git a/drivers/char/rio/rioroute.c b/drivers/staging/generic_serial/rio/rioroute.c
index f9b936ac339..f9b936ac339 100644
--- a/drivers/char/rio/rioroute.c
+++ b/drivers/staging/generic_serial/rio/rioroute.c
diff --git a/drivers/char/rio/riospace.h b/drivers/staging/generic_serial/rio/riospace.h
index ffb31d4332b..ffb31d4332b 100644
--- a/drivers/char/rio/riospace.h
+++ b/drivers/staging/generic_serial/rio/riospace.h
diff --git a/drivers/char/rio/riotable.c b/drivers/staging/generic_serial/rio/riotable.c
index 3d15802dc0f..3d15802dc0f 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/staging/generic_serial/rio/riotable.c
diff --git a/drivers/char/rio/riotty.c b/drivers/staging/generic_serial/rio/riotty.c
index 8a90393faf3..8a90393faf3 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/staging/generic_serial/rio/riotty.c
diff --git a/drivers/char/rio/route.h b/drivers/staging/generic_serial/rio/route.h
index 46e963771c3..46e963771c3 100644
--- a/drivers/char/rio/route.h
+++ b/drivers/staging/generic_serial/rio/route.h
diff --git a/drivers/char/rio/rup.h b/drivers/staging/generic_serial/rio/rup.h
index 4ae90cb207a..4ae90cb207a 100644
--- a/drivers/char/rio/rup.h
+++ b/drivers/staging/generic_serial/rio/rup.h
diff --git a/drivers/char/rio/unixrup.h b/drivers/staging/generic_serial/rio/unixrup.h
index 7abf0cba0f2..7abf0cba0f2 100644
--- a/drivers/char/rio/unixrup.h
+++ b/drivers/staging/generic_serial/rio/unixrup.h
diff --git a/drivers/char/ser_a2232.c b/drivers/staging/generic_serial/ser_a2232.c
index 9610861d1f5..3f47c2ead8e 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/staging/generic_serial/ser_a2232.c
@@ -133,8 +133,8 @@ static void a2232_hungup(void *ptr);
/* END GENERIC_SERIAL PROTOTYPES */
/* Functions that the TTY driver struct expects */
-static int a2232_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg);
+static int a2232_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg);
static void a2232_throttle(struct tty_struct *tty);
static void a2232_unthrottle(struct tty_struct *tty);
static int a2232_open(struct tty_struct * tty, struct file * filp);
@@ -447,7 +447,7 @@ static void a2232_hungup(void *ptr)
/*** END OF REAL_DRIVER FUNCTIONS ***/
/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-static int a2232_ioctl( struct tty_struct *tty, struct file *file,
+static int a2232_ioctl( struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
diff --git a/drivers/char/ser_a2232.h b/drivers/staging/generic_serial/ser_a2232.h
index bc09eb9e118..bc09eb9e118 100644
--- a/drivers/char/ser_a2232.h
+++ b/drivers/staging/generic_serial/ser_a2232.h
diff --git a/drivers/char/ser_a2232fw.ax b/drivers/staging/generic_serial/ser_a2232fw.ax
index 73643803276..73643803276 100644
--- a/drivers/char/ser_a2232fw.ax
+++ b/drivers/staging/generic_serial/ser_a2232fw.ax
diff --git a/drivers/char/ser_a2232fw.h b/drivers/staging/generic_serial/ser_a2232fw.h
index e09a30acfe5..e09a30acfe5 100644
--- a/drivers/char/ser_a2232fw.h
+++ b/drivers/staging/generic_serial/ser_a2232fw.h
diff --git a/drivers/char/sx.c b/drivers/staging/generic_serial/sx.c
index a786326cea2..1291462bcdd 100644
--- a/drivers/char/sx.c
+++ b/drivers/staging/generic_serial/sx.c
@@ -1873,14 +1873,14 @@ static int sx_break(struct tty_struct *tty, int flag)
return 0;
}
-static int sx_tiocmget(struct tty_struct *tty, struct file *file)
+static int sx_tiocmget(struct tty_struct *tty)
{
struct sx_port *port = tty->driver_data;
return sx_getsignals(port);
}
-static int sx_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int sx_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct sx_port *port = tty->driver_data;
int rts = -1, dtr = -1;
@@ -1899,7 +1899,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+static int sx_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
int rc;
diff --git a/drivers/char/sx.h b/drivers/staging/generic_serial/sx.h
index 87c2defdead..87c2defdead 100644
--- a/drivers/char/sx.h
+++ b/drivers/staging/generic_serial/sx.h
diff --git a/drivers/char/sxboards.h b/drivers/staging/generic_serial/sxboards.h
index 427927dc7db..427927dc7db 100644
--- a/drivers/char/sxboards.h
+++ b/drivers/staging/generic_serial/sxboards.h
diff --git a/drivers/char/sxwindow.h b/drivers/staging/generic_serial/sxwindow.h
index cf01b662aef..cf01b662aef 100644
--- a/drivers/char/sxwindow.h
+++ b/drivers/staging/generic_serial/sxwindow.h
diff --git a/drivers/char/vme_scc.c b/drivers/staging/generic_serial/vme_scc.c
index 12de1202d22..96838640f57 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/staging/generic_serial/vme_scc.c
@@ -75,7 +75,7 @@ static void scc_hungup(void *ptr);
static void scc_close(void *ptr);
static int scc_chars_in_buffer(void * ptr);
static int scc_open(struct tty_struct * tty, struct file * filp);
-static int scc_ioctl(struct tty_struct * tty, struct file * filp,
+static int scc_ioctl(struct tty_struct * tty,
unsigned int cmd, unsigned long arg);
static void scc_throttle(struct tty_struct *tty);
static void scc_unthrottle(struct tty_struct *tty);
@@ -1046,7 +1046,7 @@ static void scc_unthrottle (struct tty_struct * tty)
}
-static int scc_ioctl(struct tty_struct *tty, struct file *file,
+static int scc_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index ed58f482c96..36b18e30271 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -852,7 +852,7 @@ static int qt2_chars_in_buffer(struct tty_struct *tty)
* TIOCMGET and TIOCMSET are filtered off to their own methods before they get
* here, so we don't have to handle them.
*/
-static int qt2_ioctl(struct tty_struct *tty, struct file *file,
+static int qt2_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1078,7 +1078,7 @@ static void qt2_set_termios(struct tty_struct *tty,
}
}
-static int qt2_tiocmget(struct tty_struct *tty, struct file *file)
+static int qt2_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
@@ -1121,7 +1121,7 @@ static int qt2_tiocmget(struct tty_struct *tty, struct file *file)
}
}
-static int qt2_tiocmset(struct tty_struct *tty, struct file *file,
+static int qt2_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 27841ef6a56..e0aae86a880 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -1191,7 +1191,7 @@ static int qt_write_room(struct tty_struct *tty)
}
-static int qt_ioctl(struct tty_struct *tty, struct file *file,
+static int qt_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1383,7 +1383,7 @@ static void qt_break(struct tty_struct *tty, int break_state)
static inline int qt_real_tiocmget(struct tty_struct *tty,
struct usb_serial_port *port,
- struct file *file, struct usb_serial *serial)
+ struct usb_serial *serial)
{
u8 mcr;
@@ -1425,7 +1425,6 @@ static inline int qt_real_tiocmget(struct tty_struct *tty,
static inline int qt_real_tiocmset(struct tty_struct *tty,
struct usb_serial_port *port,
- struct file *file,
struct usb_serial *serial,
unsigned int value)
{
@@ -1462,7 +1461,7 @@ static inline int qt_real_tiocmset(struct tty_struct *tty,
return 0;
}
-static int qt_tiocmget(struct tty_struct *tty, struct file *file)
+static int qt_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = get_usb_serial(port, __func__);
@@ -1480,13 +1479,13 @@ static int qt_tiocmget(struct tty_struct *tty, struct file *file)
dbg("%s - port %d\n", __func__, port->number);
dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
- retval = qt_real_tiocmget(tty, port, file, serial);
+ retval = qt_real_tiocmget(tty, port, serial);
spin_unlock_irqrestore(&qt_port->lock, flags);
return retval;
}
-static int qt_tiocmset(struct tty_struct *tty, struct file *file,
+static int qt_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
@@ -1506,7 +1505,7 @@ static int qt_tiocmset(struct tty_struct *tty, struct file *file,
dbg("%s - port %d\n", __func__, port->number);
dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding);
- retval = qt_real_tiocmset(tty, port, file, serial, set);
+ retval = qt_real_tiocmset(tty, port, serial, set);
spin_unlock_irqrestore(&qt_port->lock, flags);
return retval;
diff --git a/drivers/staging/tty/Kconfig b/drivers/staging/tty/Kconfig
new file mode 100644
index 00000000000..77103a07abb
--- /dev/null
+++ b/drivers/staging/tty/Kconfig
@@ -0,0 +1,87 @@
+config STALLION
+ tristate "Stallion EasyIO or EC8/32 support"
+ depends on STALDRV && (ISA || EISA || PCI)
+ help
+ If you have an EasyIO or EasyConnection 8/32 multiport Stallion
+ card, then this is for you; say Y. Make sure to read
+ <file:Documentation/serial/stallion.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stallion.
+
+config ISTALLION
+ tristate "Stallion EC8/64, ONboard, Brumby support"
+ depends on STALDRV && (ISA || EISA || PCI)
+ help
+ If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
+ serial multiport card, say Y here. Make sure to read
+ <file:Documentation/serial/stallion.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called istallion.
+
+config DIGIEPCA
+ tristate "Digiboard Intelligent Async Support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ ---help---
+ This is a driver for Digi International's Xx, Xeve, and Xem series
+ of cards which provide multiple serial ports. You would need
+ something like this to connect more than two modems to your Linux
+ box, for instance in order to become a dial-in server. This driver
+ supports the original PC (ISA) boards as well as PCI, and EISA. If
+ you have a card like this, say Y here and read the file
+ <file:Documentation/serial/digiepca.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called epca.
+
+config RISCOM8
+ tristate "SDL RISCom/8 card support"
+ depends on SERIAL_NONSTANDARD
+ help
+ This is a driver for the SDL Communications RISCom/8 multiport card,
+ which gives you many serial ports. You would need something like
+ this to connect more than two modems to your Linux box, for instance
+ in order to become a dial-in server. If you have a card like that,
+ say Y here and read the file <file:Documentation/serial/riscom8.txt>.
+
+ Also it's possible to say M here and compile this driver as kernel
+ loadable module; the module will be called riscom8.
+
+config SPECIALIX
+ tristate "Specialix IO8+ card support"
+ depends on SERIAL_NONSTANDARD
+ help
+ This is a driver for the Specialix IO8+ multiport card (both the
+ ISA and the PCI version) which gives you many serial ports. You
+ would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ If you have a card like that, say Y here and read the file
+ <file:Documentation/serial/specialix.txt>. Also it's possible to say
+ M here and compile this driver as kernel loadable module which will be
+ called specialix.
+
+config COMPUTONE
+ tristate "Computone IntelliPort Plus serial support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ ---help---
+ This driver supports the entire family of Intelliport II/Plus
+ controllers with the exception of the MicroChannel controllers and
+ products previous to the Intelliport II. These are multiport cards,
+ which give you many serial ports. You would need something like this
+ to connect more than two modems to your Linux box, for instance in
+ order to become a dial-in server. If you have a card like that, say
+ Y here and read <file:Documentation/serial/computone.txt>.
+
+ To compile this driver as module, choose M here: the
+ module will be called ip2.
+
+config SERIAL167
+ bool "CD2401 support for MVME166/7 serial ports"
+ depends on MVME16x
+ help
+ This is the driver for the serial ports on the Motorola MVME166,
+ 167, and 172 boards. Everyone using one of these boards should say
+ Y here.
+
diff --git a/drivers/staging/tty/Makefile b/drivers/staging/tty/Makefile
new file mode 100644
index 00000000000..ac57c105611
--- /dev/null
+++ b/drivers/staging/tty/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_STALLION) += stallion.o
+obj-$(CONFIG_ISTALLION) += istallion.o
+obj-$(CONFIG_DIGIEPCA) += epca.o
+obj-$(CONFIG_SERIAL167) += serial167.o
+obj-$(CONFIG_SPECIALIX) += specialix.o
+obj-$(CONFIG_RISCOM8) += riscom8.o
+obj-$(CONFIG_COMPUTONE) += ip2/
diff --git a/drivers/staging/tty/TODO b/drivers/staging/tty/TODO
new file mode 100644
index 00000000000..88756453ac6
--- /dev/null
+++ b/drivers/staging/tty/TODO
@@ -0,0 +1,6 @@
+These are a few tty/serial drivers that either do not build,
+or work if they do build, or if they seem to work, are for obsolete
+hardware, or are full of unfixable races and no one uses them anymore.
+
+If no one steps up to adopt any of these drivers, they will be removed
+in the 2.6.41 release.
diff --git a/drivers/char/cd1865.h b/drivers/staging/tty/cd1865.h
index 9940966e7a1..9940966e7a1 100644
--- a/drivers/char/cd1865.h
+++ b/drivers/staging/tty/cd1865.h
diff --git a/drivers/char/digi1.h b/drivers/staging/tty/digi1.h
index 94d4eab5d3c..94d4eab5d3c 100644
--- a/drivers/char/digi1.h
+++ b/drivers/staging/tty/digi1.h
diff --git a/drivers/char/digiFep1.h b/drivers/staging/tty/digiFep1.h
index 3c1f1922c79..3c1f1922c79 100644
--- a/drivers/char/digiFep1.h
+++ b/drivers/staging/tty/digiFep1.h
diff --git a/drivers/char/digiPCI.h b/drivers/staging/tty/digiPCI.h
index 6ca7819e506..6ca7819e506 100644
--- a/drivers/char/digiPCI.h
+++ b/drivers/staging/tty/digiPCI.h
diff --git a/drivers/char/epca.c b/drivers/staging/tty/epca.c
index d9df46aa0fb..7ad3638967a 100644
--- a/drivers/char/epca.c
+++ b/drivers/staging/tty/epca.c
@@ -175,9 +175,9 @@ static unsigned termios2digi_i(struct channel *ch, unsigned);
static unsigned termios2digi_c(struct channel *ch, unsigned);
static void epcaparam(struct tty_struct *, struct channel *);
static void receive_data(struct channel *, struct tty_struct *tty);
-static int pc_ioctl(struct tty_struct *, struct file *,
+static int pc_ioctl(struct tty_struct *,
unsigned int, unsigned long);
-static int info_ioctl(struct tty_struct *, struct file *,
+static int info_ioctl(struct tty_struct *,
unsigned int, unsigned long);
static void pc_set_termios(struct tty_struct *, struct ktermios *);
static void do_softint(struct work_struct *work);
@@ -1919,7 +1919,7 @@ static void receive_data(struct channel *ch, struct tty_struct *tty)
tty_schedule_flip(tty);
}
-static int info_ioctl(struct tty_struct *tty, struct file *file,
+static int info_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
@@ -1982,7 +1982,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
-static int pc_tiocmget(struct tty_struct *tty, struct file *file)
+static int pc_tiocmget(struct tty_struct *tty)
{
struct channel *ch = tty->driver_data;
struct board_chan __iomem *bc;
@@ -2015,7 +2015,7 @@ static int pc_tiocmget(struct tty_struct *tty, struct file *file)
return mflag;
}
-static int pc_tiocmset(struct tty_struct *tty, struct file *file,
+static int pc_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct channel *ch = tty->driver_data;
@@ -2057,7 +2057,7 @@ static int pc_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int pc_ioctl(struct tty_struct *tty, struct file *file,
+static int pc_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
digiflow_t dflow;
@@ -2074,14 +2074,14 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
return -EINVAL;
switch (cmd) {
case TIOCMODG:
- mflag = pc_tiocmget(tty, file);
+ mflag = pc_tiocmget(tty);
if (put_user(mflag, (unsigned long __user *)argp))
return -EFAULT;
break;
case TIOCMODS:
if (get_user(mstat, (unsigned __user *)argp))
return -EFAULT;
- return pc_tiocmset(tty, file, mstat, ~mstat);
+ return pc_tiocmset(tty, mstat, ~mstat);
case TIOCSDTR:
spin_lock_irqsave(&epca_lock, flags);
ch->omodem |= ch->m_dtr;
diff --git a/drivers/char/epca.h b/drivers/staging/tty/epca.h
index d414bf2dbf7..d414bf2dbf7 100644
--- a/drivers/char/epca.h
+++ b/drivers/staging/tty/epca.h
diff --git a/drivers/char/epcaconfig.h b/drivers/staging/tty/epcaconfig.h
index 55dec067078..55dec067078 100644
--- a/drivers/char/epcaconfig.h
+++ b/drivers/staging/tty/epcaconfig.h
diff --git a/drivers/char/ip2/Makefile b/drivers/staging/tty/ip2/Makefile
index 7b78e0dfc5b..7b78e0dfc5b 100644
--- a/drivers/char/ip2/Makefile
+++ b/drivers/staging/tty/ip2/Makefile
diff --git a/drivers/char/ip2/i2cmd.c b/drivers/staging/tty/ip2/i2cmd.c
index e7af647800b..e7af647800b 100644
--- a/drivers/char/ip2/i2cmd.c
+++ b/drivers/staging/tty/ip2/i2cmd.c
diff --git a/drivers/char/ip2/i2cmd.h b/drivers/staging/tty/ip2/i2cmd.h
index 29277ec6b8e..29277ec6b8e 100644
--- a/drivers/char/ip2/i2cmd.h
+++ b/drivers/staging/tty/ip2/i2cmd.h
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/staging/tty/ip2/i2ellis.c
index 29db44de399..29db44de399 100644
--- a/drivers/char/ip2/i2ellis.c
+++ b/drivers/staging/tty/ip2/i2ellis.c
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/staging/tty/ip2/i2ellis.h
index fb6df245601..fb6df245601 100644
--- a/drivers/char/ip2/i2ellis.h
+++ b/drivers/staging/tty/ip2/i2ellis.h
diff --git a/drivers/char/ip2/i2hw.h b/drivers/staging/tty/ip2/i2hw.h
index c0ba6c05f0c..c0ba6c05f0c 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/staging/tty/ip2/i2hw.h
diff --git a/drivers/char/ip2/i2lib.c b/drivers/staging/tty/ip2/i2lib.c
index 0d10b89218e..0d10b89218e 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/staging/tty/ip2/i2lib.c
diff --git a/drivers/char/ip2/i2lib.h b/drivers/staging/tty/ip2/i2lib.h
index e559e9bac06..e559e9bac06 100644
--- a/drivers/char/ip2/i2lib.h
+++ b/drivers/staging/tty/ip2/i2lib.h
diff --git a/drivers/char/ip2/i2pack.h b/drivers/staging/tty/ip2/i2pack.h
index 00342a677c9..00342a677c9 100644
--- a/drivers/char/ip2/i2pack.h
+++ b/drivers/staging/tty/ip2/i2pack.h
diff --git a/drivers/char/ip2/ip2.h b/drivers/staging/tty/ip2/ip2.h
index 936ccc53394..936ccc53394 100644
--- a/drivers/char/ip2/ip2.h
+++ b/drivers/staging/tty/ip2/ip2.h
diff --git a/drivers/char/ip2/ip2ioctl.h b/drivers/staging/tty/ip2/ip2ioctl.h
index aa0a9da85e0..aa0a9da85e0 100644
--- a/drivers/char/ip2/ip2ioctl.h
+++ b/drivers/staging/tty/ip2/ip2ioctl.h
diff --git a/drivers/char/ip2/ip2main.c b/drivers/staging/tty/ip2/ip2main.c
index c3a025356b8..ea7a8fb0828 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/staging/tty/ip2/ip2main.c
@@ -173,7 +173,7 @@ static void ip2_flush_chars(PTTY);
static int ip2_write_room(PTTY);
static int ip2_chars_in_buf(PTTY);
static void ip2_flush_buffer(PTTY);
-static int ip2_ioctl(PTTY, struct file *, UINT, ULONG);
+static int ip2_ioctl(PTTY, UINT, ULONG);
static void ip2_set_termios(PTTY, struct ktermios *);
static void ip2_set_line_discipline(PTTY);
static void ip2_throttle(PTTY);
@@ -181,8 +181,8 @@ static void ip2_unthrottle(PTTY);
static void ip2_stop(PTTY);
static void ip2_start(PTTY);
static void ip2_hangup(PTTY);
-static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
-static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
+static int ip2_tiocmget(struct tty_struct *tty);
+static int ip2_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int ip2_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
@@ -2038,7 +2038,7 @@ ip2_stop ( PTTY tty )
/* Device Ioctl Section */
/******************************************************************************/
-static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
+static int ip2_tiocmget(struct tty_struct *tty)
{
i2ChanStrPtr pCh = DevTable[tty->index];
#ifdef ENABLE_DSSNOW
@@ -2085,7 +2085,7 @@ static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
| ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0);
}
-static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
+static int ip2_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
i2ChanStrPtr pCh = DevTable[tty->index];
@@ -2127,7 +2127,7 @@ static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
/* */
/******************************************************************************/
static int
-ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
+ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg )
{
wait_queue_t wait;
i2ChanStrPtr pCh = DevTable[tty->index];
diff --git a/drivers/char/ip2/ip2trace.h b/drivers/staging/tty/ip2/ip2trace.h
index da20435dc8a..da20435dc8a 100644
--- a/drivers/char/ip2/ip2trace.h
+++ b/drivers/staging/tty/ip2/ip2trace.h
diff --git a/drivers/char/ip2/ip2types.h b/drivers/staging/tty/ip2/ip2types.h
index 9d67b260b2f..9d67b260b2f 100644
--- a/drivers/char/ip2/ip2types.h
+++ b/drivers/staging/tty/ip2/ip2types.h
diff --git a/drivers/char/istallion.c b/drivers/staging/tty/istallion.c
index 7c6de4c9245..0b266272ccc 100644
--- a/drivers/char/istallion.c
+++ b/drivers/staging/tty/istallion.c
@@ -603,7 +603,7 @@ static int stli_putchar(struct tty_struct *tty, unsigned char ch);
static void stli_flushchars(struct tty_struct *tty);
static int stli_writeroom(struct tty_struct *tty);
static int stli_charsinbuffer(struct tty_struct *tty);
-static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
static void stli_settermios(struct tty_struct *tty, struct ktermios *old);
static void stli_throttle(struct tty_struct *tty);
static void stli_unthrottle(struct tty_struct *tty);
@@ -1501,7 +1501,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s
/*****************************************************************************/
-static int stli_tiocmget(struct tty_struct *tty, struct file *file)
+static int stli_tiocmget(struct tty_struct *tty)
{
struct stliport *portp = tty->driver_data;
struct stlibrd *brdp;
@@ -1524,7 +1524,7 @@ static int stli_tiocmget(struct tty_struct *tty, struct file *file)
return stli_mktiocm(portp->asig.sigvalue);
}
-static int stli_tiocmset(struct tty_struct *tty, struct file *file,
+static int stli_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct stliport *portp = tty->driver_data;
@@ -1556,7 +1556,7 @@ static int stli_tiocmset(struct tty_struct *tty, struct file *file,
sizeof(asysigs_t), 0);
}
-static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
{
struct stliport *portp;
struct stlibrd *brdp;
diff --git a/drivers/char/riscom8.c b/drivers/staging/tty/riscom8.c
index af4de1fe844..602643a40b4 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/staging/tty/riscom8.c
@@ -1086,7 +1086,7 @@ static int rc_chars_in_buffer(struct tty_struct *tty)
return port->xmit_cnt;
}
-static int rc_tiocmget(struct tty_struct *tty, struct file *file)
+static int rc_tiocmget(struct tty_struct *tty)
{
struct riscom_port *port = tty->driver_data;
struct riscom_board *bp;
@@ -1115,8 +1115,8 @@ static int rc_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
-static int rc_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int rc_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct riscom_port *port = tty->driver_data;
unsigned long flags;
@@ -1236,7 +1236,7 @@ static int rc_get_serial_info(struct riscom_port *port,
return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
-static int rc_ioctl(struct tty_struct *tty, struct file *filp,
+static int rc_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct riscom_port *port = tty->driver_data;
diff --git a/drivers/char/riscom8.h b/drivers/staging/tty/riscom8.h
index c9876b3f971..c9876b3f971 100644
--- a/drivers/char/riscom8.h
+++ b/drivers/staging/tty/riscom8.h
diff --git a/drivers/char/riscom8_reg.h b/drivers/staging/tty/riscom8_reg.h
index a32475ed0d1..a32475ed0d1 100644
--- a/drivers/char/riscom8_reg.h
+++ b/drivers/staging/tty/riscom8_reg.h
diff --git a/drivers/char/serial167.c b/drivers/staging/tty/serial167.c
index 748c3b0ecd8..674af693397 100644
--- a/drivers/char/serial167.c
+++ b/drivers/staging/tty/serial167.c
@@ -1308,7 +1308,7 @@ check_and_exit:
return startup(info);
} /* set_serial_info */
-static int cy_tiocmget(struct tty_struct *tty, struct file *file)
+static int cy_tiocmget(struct tty_struct *tty)
{
struct cyclades_port *info = tty->driver_data;
int channel;
@@ -1331,8 +1331,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
} /* cy_tiocmget */
static int
-cy_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
{
struct cyclades_port *info = tty->driver_data;
int channel;
@@ -1493,7 +1492,7 @@ get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
}
static int
-cy_ioctl(struct tty_struct *tty, struct file *file,
+cy_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct cyclades_port *info = tty->driver_data;
diff --git a/drivers/char/specialix.c b/drivers/staging/tty/specialix.c
index c2bca3f25ef..47e5753f732 100644
--- a/drivers/char/specialix.c
+++ b/drivers/staging/tty/specialix.c
@@ -1737,7 +1737,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty)
return port->xmit_cnt;
}
-static int sx_tiocmget(struct tty_struct *tty, struct file *file)
+static int sx_tiocmget(struct tty_struct *tty)
{
struct specialix_port *port = tty->driver_data;
struct specialix_board *bp;
@@ -1778,7 +1778,7 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
}
-static int sx_tiocmset(struct tty_struct *tty, struct file *file,
+static int sx_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct specialix_port *port = tty->driver_data;
@@ -1928,7 +1928,7 @@ static int sx_get_serial_info(struct specialix_port *port,
}
-static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+static int sx_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct specialix_port *port = tty->driver_data;
diff --git a/drivers/char/specialix_io8.h b/drivers/staging/tty/specialix_io8.h
index c63005274d9..c63005274d9 100644
--- a/drivers/char/specialix_io8.h
+++ b/drivers/staging/tty/specialix_io8.h
diff --git a/drivers/char/stallion.c b/drivers/staging/tty/stallion.c
index 461a5a04551..4fff5cd3b16 100644
--- a/drivers/char/stallion.c
+++ b/drivers/staging/tty/stallion.c
@@ -1094,7 +1094,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
/*****************************************************************************/
-static int stl_tiocmget(struct tty_struct *tty, struct file *file)
+static int stl_tiocmget(struct tty_struct *tty)
{
struct stlport *portp;
@@ -1107,7 +1107,7 @@ static int stl_tiocmget(struct tty_struct *tty, struct file *file)
return stl_getsignals(portp);
}
-static int stl_tiocmset(struct tty_struct *tty, struct file *file,
+static int stl_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct stlport *portp;
@@ -1132,14 +1132,13 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
{
struct stlport *portp;
int rc;
void __user *argp = (void __user *)arg;
- pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd,
- arg);
+ pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg);
portp = tty->driver_data;
if (portp == NULL)
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
new file mode 100644
index 00000000000..3fd7199301b
--- /dev/null
+++ b/drivers/tty/Kconfig
@@ -0,0 +1,321 @@
+config VT
+ bool "Virtual terminal" if EXPERT
+ depends on !S390
+ select INPUT
+ default y
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+ depends on VT
+ default y
+ bool "Enable character translations in console" if EXPERT
+ ---help---
+ This enables support for font mapping and Unicode translation
+ on virtual consoles.
+
+config VT_CONSOLE
+ bool "Support for console on virtual terminal" if EXPERT
+ depends on VT
+ default y
+ ---help---
+ The system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode. If you
+ answer Y here, a virtual terminal (the device used to interact with
+ a physical terminal) can be used as system console. This is the most
+ common mode of operations, so you should say Y here unless you want
+ the kernel messages be output only to a serial port (in which case
+ you should say Y to "Console on serial port", below).
+
+ If you do say Y here, by default the currently visible virtual
+ terminal (/dev/tty0) will be used as system console. You can change
+ that with a kernel command line option such as "console=tty3" which
+ would use the third virtual terminal as system console. (Try "man
+ bootparam" or see the documentation of your boot loader (lilo or
+ loadlin) about how to pass options to the kernel at boot time.)
+
+ If unsure, say Y.
+
+config HW_CONSOLE
+ bool
+ depends on VT && !S390 && !UML
+ default y
+
+config VT_HW_CONSOLE_BINDING
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ default n
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/console/console.txt> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.txt>.
+
+config UNIX98_PTYS
+ bool "Unix98 PTY support" if EXPERT
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx for
+ masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+ has a number of problems. The GNU C library glibc 2.1 and later,
+ however, supports the Unix98 naming standard: in order to acquire a
+ pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+ terminal is then made available to the process and the pseudo
+ terminal slave can be accessed as /dev/pts/<number>. What was
+ traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+ All modern Linux systems use the Unix98 ptys. Say Y unless
+ you're on an embedded system and want to conserve memory.
+
+config DEVPTS_MULTIPLE_INSTANCES
+ bool "Support multiple instances of devpts"
+ depends on UNIX98_PTYS
+ default n
+ ---help---
+ Enable support for multiple instances of devpts filesystem.
+ If you want to have isolated PTY namespaces (eg: in containers),
+ say Y here. Otherwise, say N. If enabled, each mount of devpts
+ filesystem with the '-o newinstance' option will create an
+ independent PTY namespace.
+
+config LEGACY_PTYS
+ bool "Legacy (BSD) PTY support"
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx
+ for masters and /dev/ttyxx for slaves of pseudo
+ terminals. This scheme has a number of problems, including
+ security. This option enables these legacy devices; on most
+ systems, it is safe to say N.
+
+
+config LEGACY_PTY_COUNT
+ int "Maximum number of legacy PTY in use"
+ depends on LEGACY_PTYS
+ range 0 256
+ default "256"
+ ---help---
+ The maximum number of legacy PTYs that can be used at any one time.
+ The default is 256, and should be more than enough. Embedded
+ systems may want to reduce this to save memory.
+
+ When not in use, each legacy PTY occupies 12 bytes on 32-bit
+ architectures and 24 bytes on 64-bit architectures.
+
+config BFIN_JTAG_COMM
+ tristate "Blackfin JTAG Communication"
+ depends on BLACKFIN
+ help
+ Add support for emulating a TTY device over the Blackfin JTAG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+ bool "Console on Blackfin JTAG"
+ depends on BFIN_JTAG_COMM=y
+
+config SERIAL_NONSTANDARD
+ bool "Non-standard serial port support"
+ depends on HAS_IOMEM
+ ---help---
+ Say Y here if you have any non-standard serial boards -- boards
+ which aren't supported using the standard "dumb" serial driver.
+ This includes intelligent serial boards such as Cyclades,
+ Digiboards, etc. These are usually used for systems that need many
+ serial ports because they serve many terminals or dial-in
+ connections.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about non-standard serial boards.
+
+ Most people can say N here.
+
+config ROCKETPORT
+ tristate "Comtrol RocketPort support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ help
+ This driver supports Comtrol RocketPort and RocketModem PCI boards.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/serial/rocket.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rocket.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+ tristate "Cyclades async mux support"
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
+ select FW_LOADER
+ ---help---
+ This driver supports Cyclades Z and Y multiserial boards.
+ You would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ For information about the Cyclades-Z card, read
+ <file:Documentation/serial/README.cycladesZ>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyclades.
+
+ If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+ bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CYCLADES
+ help
+ The Cyclades-Z family of multiport cards allows 2 (two) driver op
+ modes: polling and interrupt. In polling mode, the driver will check
+ the status of the Cyclades-Z ports every certain amount of time
+ (which is called polling cycle and is configurable). In interrupt
+ mode, it will use an interrupt line (IRQ) in order to check the
+ status of the Cyclades-Z ports. The default op mode is polling. If
+ unsure, say N.
+
+config MOXA_INTELLIO
+ tristate "Moxa Intellio support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ select FW_LOADER
+ help
+ Say Y here if you have a Moxa Intellio multiport serial card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxa.
+
+config MOXA_SMARTIO
+ tristate "Moxa SmartIO support v. 2.0"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ This driver can also be built as a module. The module will be called
+ mxser. If you want to do that, say M here.
+
+config SYNCLINK
+ tristate "Microgate SyncLink card support"
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ help
+ Provides support for the SyncLink ISA and PCI multiprotocol serial
+ adapters. These adapters support asynchronous and HDLC bit
+ synchronous communication up to 10Mbps (PCI adapter).
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink. If you want to do that, say M
+ here.
+
+config SYNCLINKMP
+ tristate "SyncLink Multiport support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp. If you want to do that, say M
+ here.
+
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config NOZOMI
+ tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+ depends on PCI && EXPERIMENTAL
+ help
+ If you have a HSDPA driver Broadband Wireless Data Card -
+ Globe Trotter PCMCIA card, say Y here.
+
+ To compile this driver as a module, choose M here, the module
+ will be called nozomi.
+
+config ISI
+ tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && PCI
+ select FW_LOADER
+ help
+ This is a driver for the Multi-Tech cards which provide several
+ serial ports. The driver is experimental and can currently only be
+ built as a module. The module will be called isicom.
+ If you want to do that, choose M here.
+
+config N_HDLC
+ tristate "HDLC line discipline support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Allows synchronous HDLC communications with tty device drivers that
+ support synchronous HDLC such as the Microgate SyncLink adapter.
+
+ This driver can be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called n_hdlc. If you want to do that, say M
+ here.
+
+config N_GSM
+ tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on NET
+ help
+ This line discipline provides support for the GSM MUX protocol and
+ presents the mux as a set of 61 individual tty devices.
+
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 396277216e4..690522fcb33 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -11,3 +11,18 @@ obj-$(CONFIG_R3964) += n_r3964.o
obj-y += vt/
obj-$(CONFIG_HVC_DRIVER) += hvc/
obj-y += serial/
+
+# tty drivers
+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
+obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
+obj-$(CONFIG_CYCLADES) += cyclades.o
+obj-$(CONFIG_ISI) += isicom.o
+obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
+obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
+obj-$(CONFIG_NOZOMI) += nozomi.o
+obj-$(CONFIG_ROCKETPORT) += rocket.o
+obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
+obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
+obj-$(CONFIG_SYNCLINK) += synclink.o
+
+obj-y += ipwireless/
diff --git a/drivers/char/amiserial.c b/drivers/tty/amiserial.c
index 6ee3348bc3e..f214e502247 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1194,7 +1194,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value)
}
-static int rs_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_tiocmget(struct tty_struct *tty)
{
struct async_struct * info = tty->driver_data;
unsigned char control, status;
@@ -1216,8 +1216,8 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file)
| (!(status & SER_CTS) ? TIOCM_CTS : 0);
}
-static int rs_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int rs_tiocmset(struct tty_struct *tty, unsigned int set,
+ unsigned int clear)
{
struct async_struct * info = tty->driver_data;
unsigned long flags;
@@ -1293,7 +1293,7 @@ static int rs_get_icount(struct tty_struct *tty,
return 0;
}
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct async_struct * info = tty->driver_data;
diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 16402445f2b..16402445f2b 100644
--- a/drivers/char/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
diff --git a/drivers/char/cyclades.c b/drivers/tty/cyclades.c
index 4f152c28f40..c99728f0cd9 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -2429,7 +2429,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
return put_user(result, (unsigned long __user *)value);
}
-static int cy_tiocmget(struct tty_struct *tty, struct file *file)
+static int cy_tiocmget(struct tty_struct *tty)
{
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
@@ -2483,7 +2483,7 @@ end:
} /* cy_tiomget */
static int
-cy_tiocmset(struct tty_struct *tty, struct file *file,
+cy_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct cyclades_port *info = tty->driver_data;
@@ -2680,7 +2680,7 @@ static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
* not recognized by the driver, it should return ENOIOCTLCMD.
*/
static int
-cy_ioctl(struct tty_struct *tty, struct file *file,
+cy_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct cyclades_port *info = tty->driver_data;
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
new file mode 100644
index 00000000000..6f2c9809f1f
--- /dev/null
+++ b/drivers/tty/hvc/Kconfig
@@ -0,0 +1,105 @@
+config HVC_DRIVER
+ bool
+ help
+ Generic "hypervisor virtual console" infrastructure for various
+ hypervisors (pSeries, iSeries, Xen, lguest).
+ It will automatically be selected if one of the back-end console drivers
+ is selected.
+
+config HVC_IRQ
+ bool
+
+config HVC_CONSOLE
+ bool "pSeries Hypervisor Virtual Console support"
+ depends on PPC_PSERIES
+ select HVC_DRIVER
+ select HVC_IRQ
+ help
+ pSeries machines when partitioned support a hypervisor virtual
+ console. This driver allows each pSeries partition to have a console
+ which is accessed via the HMC.
+
+config HVC_ISERIES
+ bool "iSeries Hypervisor Virtual Console support"
+ depends on PPC_ISERIES
+ default y
+ select HVC_DRIVER
+ select HVC_IRQ
+ select VIOPATH
+ help
+ iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+ bool "IBM RTAS Console support"
+ depends on PPC_RTAS
+ select HVC_DRIVER
+ help
+ IBM Console device driver which makes use of RTAS
+
+config HVC_BEAT
+ bool "Toshiba's Beat Hypervisor Console support"
+ depends on PPC_CELLEB
+ select HVC_DRIVER
+ help
+ Toshiba's Cell Reference Set Beat Console device driver
+
+config HVC_IUCV
+ bool "z/VM IUCV Hypervisor console support (VM only)"
+ depends on S390
+ select HVC_DRIVER
+ select IUCV
+ default y
+ help
+ This driver provides a Hypervisor console (HVC) back-end to access
+ a Linux (console) terminal via a z/VM IUCV communication path.
+
+config HVC_XEN
+ bool "Xen Hypervisor Console support"
+ depends on XEN
+ select HVC_DRIVER
+ select HVC_IRQ
+ default y
+ help
+ Xen virtual console device driver
+
+config HVC_UDBG
+ bool "udbg based fake hypervisor console"
+ depends on PPC && EXPERIMENTAL
+ select HVC_DRIVER
+ default n
+
+config HVC_DCC
+ bool "ARM JTAG DCC console"
+ depends on ARM
+ select HVC_DRIVER
+ help
+ This console uses the JTAG DCC on ARM to create a console under the HVC
+ driver. This console is used through a JTAG only on ARM. If you don't have
+ a JTAG then you probably don't want this option.
+
+config HVC_BFIN_JTAG
+ bool "Blackfin JTAG console"
+ depends on BLACKFIN
+ select HVC_DRIVER
+ help
+ This console uses the Blackfin JTAG to create a console under the
+ the HVC driver. If you don't have JTAG, then you probably don't
+ want this option.
+
+config HVCS
+ tristate "IBM Hypervisor Virtual Console Server support"
+ depends on PPC_PSERIES && HVC_CONSOLE
+ help
+ Partitionable IBM Power5 ppc64 machines allow hosting of
+ firmware virtual consoles from one Linux partition by
+ another Linux partition. This driver allows console data
+ from Linux partitions to be accessed through TTY device
+ interfaces in the device tree of a Linux partition running
+ this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hvcs. Additionally, this module
+ will depend on arch specific APIs exported from hvcserver.ko
+ which will also be compiled when this driver is built as a
+ module.
+
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index d79e7e9bf9d..40a25d93fe5 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_HVC_IRQ) += hvc_irq.o
obj-$(CONFIG_HVC_XEN) += hvc_xen.o
obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o
obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o
+obj-$(CONFIG_HVC_BFIN_JTAG) += hvc_bfin_jtag.o
obj-$(CONFIG_HVCS) += hvcs.o
diff --git a/drivers/tty/hvc/hvc_bfin_jtag.c b/drivers/tty/hvc/hvc_bfin_jtag.c
new file mode 100644
index 00000000000..31d6cc6a77a
--- /dev/null
+++ b/drivers/tty/hvc/hvc_bfin_jtag.c
@@ -0,0 +1,105 @@
+/*
+ * Console via Blackfin JTAG Communication
+ *
+ * Copyright 2008-2011 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include "hvc_console.h"
+
+/* See the Debug/Emulation chapter in the HRM */
+#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */
+#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */
+#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */
+#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */
+
+/* Helper functions to glue the register API to simple C operations */
+static inline uint32_t bfin_write_emudat(uint32_t emudat)
+{
+ __asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+ return emudat;
+}
+
+static inline uint32_t bfin_read_emudat(void)
+{
+ uint32_t emudat;
+ __asm__ __volatile__("%0 = emudat;" : "=d"(emudat));
+ return emudat;
+}
+
+/* Send data to the host */
+static int hvc_bfin_put_chars(uint32_t vt, const char *buf, int count)
+{
+ static uint32_t outbound_len;
+ uint32_t emudat;
+ int ret;
+
+ if (bfin_read_DBGSTAT() & EMUDOF)
+ return 0;
+
+ if (!outbound_len) {
+ outbound_len = count;
+ bfin_write_emudat(outbound_len);
+ return 0;
+ }
+
+ ret = min(outbound_len, (uint32_t)4);
+ memcpy(&emudat, buf, ret);
+ bfin_write_emudat(emudat);
+ outbound_len -= ret;
+
+ return ret;
+}
+
+/* Receive data from the host */
+static int hvc_bfin_get_chars(uint32_t vt, char *buf, int count)
+{
+ static uint32_t inbound_len;
+ uint32_t emudat;
+ int ret;
+
+ if (!(bfin_read_DBGSTAT() & EMUDIF))
+ return 0;
+ emudat = bfin_read_emudat();
+
+ if (!inbound_len) {
+ inbound_len = emudat;
+ return 0;
+ }
+
+ ret = min(inbound_len, (uint32_t)4);
+ memcpy(buf, &emudat, ret);
+ inbound_len -= ret;
+
+ return ret;
+}
+
+/* Glue the HVC layers to the Blackfin layers */
+static const struct hv_ops hvc_bfin_get_put_ops = {
+ .get_chars = hvc_bfin_get_chars,
+ .put_chars = hvc_bfin_put_chars,
+};
+
+static int __init hvc_bfin_console_init(void)
+{
+ hvc_instantiate(0, 0, &hvc_bfin_get_put_ops);
+ return 0;
+}
+console_initcall(hvc_bfin_console_init);
+
+static int __init hvc_bfin_init(void)
+{
+ hvc_alloc(0, 0, &hvc_bfin_get_put_ops, 128);
+ return 0;
+}
+device_initcall(hvc_bfin_init);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 6470f63deb4..435f6facbc2 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -33,54 +33,29 @@
static inline u32 __dcc_getstatus(void)
{
u32 __ret;
-
- asm("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
+ asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
: "=r" (__ret) : : "cc");
return __ret;
}
-#if defined(CONFIG_CPU_V7)
static inline char __dcc_getchar(void)
{
char __c;
- asm("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\
- bne get_wait \n\
- mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
- : "=r" (__c) : : "cc");
-
- return __c;
-}
-#else
-static inline char __dcc_getchar(void)
-{
- char __c;
-
- asm("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
+ asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
: "=r" (__c));
return __c;
}
-#endif
-#if defined(CONFIG_CPU_V7)
-static inline void __dcc_putchar(char c)
-{
- asm("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\
- bcs put_wait \n\
- mcr p14, 0, %0, c0, c5, 0 "
- : : "r" (c) : "cc");
-}
-#else
static inline void __dcc_putchar(char c)
{
- asm("mcr p14, 0, %0, c0, c5, 0 @ write a char"
+ asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
: /* no output register */
: "r" (c));
}
-#endif
static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
{
@@ -90,7 +65,7 @@ static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
while (__dcc_getstatus() & DCC_STATUS_TX)
cpu_relax();
- __dcc_putchar((char)(buf[i] & 0xFF));
+ __dcc_putchar(buf[i]);
}
return count;
@@ -100,15 +75,11 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
{
int i;
- for (i = 0; i < count; ++i) {
- int c = -1;
-
+ for (i = 0; i < count; ++i)
if (__dcc_getstatus() & DCC_STATUS_RX)
- c = __dcc_getchar();
- if (c < 0)
+ buf[i] = __dcc_getchar();
+ else
break;
- buf[i] = c;
- }
return i;
}
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 67a75a502c0..8a8d6373f16 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1095,7 +1095,7 @@ static void hvsi_unthrottle(struct tty_struct *tty)
h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
}
-static int hvsi_tiocmget(struct tty_struct *tty, struct file *file)
+static int hvsi_tiocmget(struct tty_struct *tty)
{
struct hvsi_struct *hp = tty->driver_data;
@@ -1103,8 +1103,8 @@ static int hvsi_tiocmget(struct tty_struct *tty, struct file *file)
return hp->mctrl;
}
-static int hvsi_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int hvsi_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct hvsi_struct *hp = tty->driver_data;
unsigned long flags;
diff --git a/drivers/char/pcmcia/ipwireless/Makefile b/drivers/tty/ipwireless/Makefile
index db80873d7f2..db80873d7f2 100644
--- a/drivers/char/pcmcia/ipwireless/Makefile
+++ b/drivers/tty/ipwireless/Makefile
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index 0aeb5a38d29..0aeb5a38d29 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/tty/ipwireless/hardware.h
index 90a8590e43b..90a8590e43b 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.h
+++ b/drivers/tty/ipwireless/hardware.h
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/tty/ipwireless/main.c
index 444155a305a..444155a305a 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/tty/ipwireless/main.c
diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/tty/ipwireless/main.h
index f2cbb116bcc..f2cbb116bcc 100644
--- a/drivers/char/pcmcia/ipwireless/main.h
+++ b/drivers/tty/ipwireless/main.h
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index f7daeea598e..f7daeea598e 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/tty/ipwireless/network.h
index 561f765b333..561f765b333 100644
--- a/drivers/char/pcmcia/ipwireless/network.h
+++ b/drivers/tty/ipwireless/network.h
diff --git a/drivers/char/pcmcia/ipwireless/setup_protocol.h b/drivers/tty/ipwireless/setup_protocol.h
index 9d6bcc77c73..9d6bcc77c73 100644
--- a/drivers/char/pcmcia/ipwireless/setup_protocol.h
+++ b/drivers/tty/ipwireless/setup_protocol.h
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index f5eb28b6cb0..ef92869502a 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -395,7 +395,7 @@ static int set_control_lines(struct ipw_tty *tty, unsigned int set,
return 0;
}
-static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file)
+static int ipw_tiocmget(struct tty_struct *linux_tty)
{
struct ipw_tty *tty = linux_tty->driver_data;
/* FIXME: Exactly how is the tty object locked here .. */
@@ -410,7 +410,7 @@ static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file)
}
static int
-ipw_tiocmset(struct tty_struct *linux_tty, struct file *file,
+ipw_tiocmset(struct tty_struct *linux_tty,
unsigned int set, unsigned int clear)
{
struct ipw_tty *tty = linux_tty->driver_data;
@@ -425,7 +425,7 @@ ipw_tiocmset(struct tty_struct *linux_tty, struct file *file,
return set_control_lines(tty, set, clear);
}
-static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
+static int ipw_ioctl(struct tty_struct *linux_tty,
unsigned int cmd, unsigned long arg)
{
struct ipw_tty *tty = linux_tty->driver_data;
@@ -484,7 +484,7 @@ static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
return tty_perform_flush(linux_tty, arg);
}
}
- return tty_mode_ioctl(linux_tty, file, cmd , arg);
+ return -ENOIOCTLCMD;
}
static int add_tty(int j,
diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/tty/ipwireless/tty.h
index 747b2d63786..747b2d63786 100644
--- a/drivers/char/pcmcia/ipwireless/tty.h
+++ b/drivers/tty/ipwireless/tty.h
diff --git a/drivers/char/isicom.c b/drivers/tty/isicom.c
index c27e9d21fea..db1cf9c328d 100644
--- a/drivers/char/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1065,7 +1065,7 @@ static int isicom_send_break(struct tty_struct *tty, int length)
return 0;
}
-static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
+static int isicom_tiocmget(struct tty_struct *tty)
{
struct isi_port *port = tty->driver_data;
/* just send the port status */
@@ -1082,8 +1082,8 @@ static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
((status & ISI_RI ) ? TIOCM_RI : 0);
}
-static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int isicom_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct isi_port *port = tty->driver_data;
unsigned long flags;
@@ -1167,7 +1167,7 @@ static int isicom_get_serial_info(struct isi_port *port,
return 0;
}
-static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
+static int isicom_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct isi_port *port = tty->driver_data;
diff --git a/drivers/char/moxa.c b/drivers/tty/moxa.c
index 107b0bd58d1..35b0c38590e 100644
--- a/drivers/char/moxa.c
+++ b/drivers/tty/moxa.c
@@ -199,8 +199,8 @@ static void moxa_set_termios(struct tty_struct *, struct ktermios *);
static void moxa_stop(struct tty_struct *);
static void moxa_start(struct tty_struct *);
static void moxa_hangup(struct tty_struct *);
-static int moxa_tiocmget(struct tty_struct *tty, struct file *file);
-static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
+static int moxa_tiocmget(struct tty_struct *tty);
+static int moxa_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static void moxa_poll(unsigned long);
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
@@ -287,7 +287,7 @@ static void moxa_low_water_check(void __iomem *ofsAddr)
* TTY operations
*/
-static int moxa_ioctl(struct tty_struct *tty, struct file *file,
+static int moxa_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct moxa_port *ch = tty->driver_data;
@@ -1257,7 +1257,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
return chars;
}
-static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
+static int moxa_tiocmget(struct tty_struct *tty)
{
struct moxa_port *ch = tty->driver_data;
int flag = 0, dtr, rts;
@@ -1277,7 +1277,7 @@ static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
return flag;
}
-static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
+static int moxa_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct moxa_port *ch;
diff --git a/drivers/char/moxa.h b/drivers/tty/moxa.h
index 87d16ce57be..87d16ce57be 100644
--- a/drivers/char/moxa.h
+++ b/drivers/tty/moxa.h
diff --git a/drivers/char/mxser.c b/drivers/tty/mxser.c
index dd9d75351cd..d188f378684 100644
--- a/drivers/char/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1320,7 +1320,7 @@ static int mxser_get_lsr_info(struct mxser_port *info,
return put_user(result, value);
}
-static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
+static int mxser_tiocmget(struct tty_struct *tty)
{
struct mxser_port *info = tty->driver_data;
unsigned char control, status;
@@ -1347,7 +1347,7 @@ static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
}
-static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
+static int mxser_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct mxser_port *info = tty->driver_data;
@@ -1655,7 +1655,7 @@ static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
return ret;
}
-static int mxser_ioctl(struct tty_struct *tty, struct file *file,
+static int mxser_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct mxser_port *info = tty->driver_data;
diff --git a/drivers/char/mxser.h b/drivers/tty/mxser.h
index 41878a69203..41878a69203 100644
--- a/drivers/char/mxser.h
+++ b/drivers/tty/mxser.h
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index aa2e5d3eb01..176f63256b3 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1250,8 +1250,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
{
- struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1,
- gsm->ftype|PF);
+ struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
if (msg == NULL)
return;
msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */
@@ -2649,13 +2648,13 @@ static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout)
to do here */
}
-static int gsmtty_tiocmget(struct tty_struct *tty, struct file *filp)
+static int gsmtty_tiocmget(struct tty_struct *tty)
{
struct gsm_dlci *dlci = tty->driver_data;
return dlci->modem_rx;
}
-static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp,
+static int gsmtty_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct gsm_dlci *dlci = tty->driver_data;
@@ -2672,7 +2671,7 @@ static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp,
}
-static int gsmtty_ioctl(struct tty_struct *tty, struct file *filp,
+static int gsmtty_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
diff --git a/drivers/char/nozomi.c b/drivers/tty/nozomi.c
index 294d03e8c61..f4f11164efe 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1514,8 +1514,6 @@ static void __devexit tty_exit(struct nozomi *dc)
DBG1(" ");
- flush_scheduled_work();
-
for (i = 0; i < MAX_PORT; ++i) {
struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port);
if (tty && list_empty(&tty->hangup_work.entry))
@@ -1750,7 +1748,7 @@ static int ntty_write_room(struct tty_struct *tty)
}
/* Gets io control parameters */
-static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
+static int ntty_tiocmget(struct tty_struct *tty)
{
const struct port *port = tty->driver_data;
const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
@@ -1767,8 +1765,8 @@ static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
}
/* Sets io controls parameters */
-static int ntty_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int ntty_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct nozomi *dc = get_dc_by_tty(tty);
unsigned long flags;
@@ -1824,7 +1822,7 @@ static int ntty_tiocgicount(struct tty_struct *tty,
return 0;
}
-static int ntty_ioctl(struct tty_struct *tty, struct file *file,
+static int ntty_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct port *port = tty->driver_data;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 923a4858550..c88029af84d 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -334,7 +334,7 @@ free_mem_out:
return -ENOMEM;
}
-static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
+static int pty_bsd_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
@@ -489,7 +489,7 @@ static struct ctl_table pty_root_table[] = {
};
-static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
+static int pty_unix98_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
diff --git a/drivers/char/rocket.c b/drivers/tty/rocket.c
index 3e4e73a0d7c..3780da8ad12 100644
--- a/drivers/char/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1169,7 +1169,7 @@ static int sGetChanRI(CHANNEL_T * ChP)
* Returns the state of the serial modem control lines. These next 2 functions
* are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
*/
-static int rp_tiocmget(struct tty_struct *tty, struct file *file)
+static int rp_tiocmget(struct tty_struct *tty)
{
struct r_port *info = tty->driver_data;
unsigned int control, result, ChanStatus;
@@ -1189,8 +1189,8 @@ static int rp_tiocmget(struct tty_struct *tty, struct file *file)
/*
* Sets the modem control lines
*/
-static int rp_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int rp_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct r_port *info = tty->driver_data;
@@ -1326,7 +1326,7 @@ static int get_version(struct r_port *info, struct rocket_version __user *retver
}
/* IOCTL call handler into the driver */
-static int rp_ioctl(struct tty_struct *tty, struct file *file,
+static int rp_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct r_port *info = tty->driver_data;
diff --git a/drivers/char/rocket.h b/drivers/tty/rocket.h
index ec863f35f1a..ec863f35f1a 100644
--- a/drivers/char/rocket.h
+++ b/drivers/tty/rocket.h
diff --git a/drivers/char/rocket_int.h b/drivers/tty/rocket_int.h
index 67e0f1e778a..67e0f1e778a 100644
--- a/drivers/char/rocket_int.h
+++ b/drivers/tty/rocket_int.h
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index de0160e3f8c..d5bfd41707e 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work)
#endif
}
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (scheduler tqueue) ->
- * do_serial_hangup() -> tty->hangup() -> rs_hangup()
- *
- */
-static void do_serial_hangup(struct work_struct *work)
-{
- struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup);
- struct tty_struct *tty;
-
- tty = info->tty;
- if (!tty)
- return;
-
- tty_hangup(tty);
-}
-
-
static int startup(struct m68k_serial * info)
{
m68328_uart *uart = &uart_addr[info->line];
@@ -967,7 +945,7 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
local_irq_restore(flags);
}
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
@@ -1347,7 +1325,6 @@ rs68328_init(void)
info->count = 0;
info->blocked_open = 0;
INIT_WORK(&info->tqueue, do_softint);
- INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
info->line = i;
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index 664ceb0a158..8c9c3c0745d 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -159,7 +159,6 @@ struct m68k_serial {
int xmit_tail;
int xmit_cnt;
struct work_struct tqueue;
- struct work_struct tqueue_hangup;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
};
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index bc21eeae8fd..0a3e8787ed5 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value)
}
#endif
-static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_360_tiocmget(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
unsigned int result = 0;
@@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
-static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
+static int rs_360_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
#ifdef modem_control
@@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty,
return 0;
}
-static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_360_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
int error;
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6f7fd..b3b881bc471 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up)
return 0;
}
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+ unsigned char status;
+
+ status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+ if (PRESL(status) == 0x10) {
+ /* already in high speed mode */
+ return 0;
+ } else {
+ status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+ status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
+ serial_outp(up, 0x04, status);
+ }
+ return 1;
+}
+
/*
* We know that the chip has FIFOs. Does it have an EFR? The
* EFR is located in the same register position as the IIR and
@@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up)
quot = serial_dl_read(up);
quot <<= 3;
- status1 = serial_in(up, 0x04); /* EXCR2 */
- status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
- status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
- serial_outp(up, 0x04, status1);
-
- serial_dl_write(up, quot);
+ if (ns16550a_goto_highspeed(up))
+ serial_dl_write(up, quot);
serial_outp(up, UART_LCR, 0);
@@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line)
struct uart_8250_port *up = &serial8250_ports[line];
if (up->capabilities & UART_NATSEMI) {
- unsigned char tmp;
-
/* Ensure it's still in high speed mode */
serial_outp(up, UART_LCR, 0xE0);
- tmp = serial_in(up, 0x04); /* EXCR2 */
- tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
- tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
- serial_outp(up, 0x04, tmp);
+ ns16550a_goto_highspeed(up);
serial_outp(up, UART_LCR, 0);
+ up->port.uartclk = 921600*16;
}
uart_resume_port(&serial8250_reg, &up->port);
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2b8334601c8..d9ccbf82509 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1319,6 +1319,18 @@ config SERIAL_MSM_CONSOLE
depends on SERIAL_MSM=y
select SERIAL_CORE_CONSOLE
+config SERIAL_MSM_HS
+ tristate "MSM UART High Speed: Serial Driver"
+ depends on ARCH_MSM
+ select SERIAL_CORE
+ help
+ If you have a machine based on MSM family of SoCs, you
+ can enable its onboard high speed serial port by enabling
+ this option.
+
+ Choose M here to compile it as a module. The module will be
+ called msm_serial_hs.
+
config SERIAL_VT8500
bool "VIA VT8500 on-chip serial port support"
depends on ARM && ARCH_VT8500
@@ -1588,12 +1600,25 @@ config SERIAL_IFX6X60
Support for the IFX6x60 modem devices on Intel MID platforms.
config SERIAL_PCH_UART
- tristate "Intel EG20T PCH UART"
- depends on PCI && DMADEVICES
+ tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+ depends on PCI
select SERIAL_CORE
- select PCH_DMA
help
This driver is for PCH(Platform controller Hub) UART of Intel EG20T
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+ This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+ Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+ ML7213 is companion chip for Intel Atom E6xx series.
+ ML7213 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_MSM_SMD
+ bool "Enable tty device interface for some SMD ports"
+ default n
+ depends on MSM_SMD
+ help
+ Enables userspace clients to read and write to some streaming SMD
+ ports via tty device interface for MSM chipset.
+
endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8ea92e9c73b..d94dc005c8a 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
+obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
@@ -92,3 +93,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
+obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index f9b49b5ff5e..8f014bb916b 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
-int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
- *platp)
-{
- struct uart_port *port;
- int i;
-
- for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
- port = &altera_jtaguart_ports[i].port;
-
- port->line = i;
- port->type = PORT_ALTERA_JTAGUART;
- port->mapbase = platp[i].mapbase;
- port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
- port->iotype = SERIAL_IO_MEM;
- port->irq = platp[i].irq;
- port->flags = ASYNC_BOOT_AUTOCONF;
- port->ops = &altera_jtaguart_ops;
- }
-
- return 0;
-}
-
#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
static void altera_jtaguart_console_putc(struct console *co, const char c)
{
@@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co,
if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
return -EINVAL;
port = &altera_jtaguart_ports[co->index].port;
- if (port->membase == 0)
+ if (port->membase == NULL)
return -ENODEV;
return 0;
}
@@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
{
struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
- int i;
+ struct resource *res_irq, *res_mem;
+ int i = pdev->id;
- for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
- port = &altera_jtaguart_ports[i].port;
+ /* -1 emphasizes that the platform must have one port, no .N suffix */
+ if (i == -1)
+ i = 0;
- port->line = i;
- port->type = PORT_ALTERA_JTAGUART;
- port->mapbase = platp[i].mapbase;
- port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
- port->iotype = SERIAL_IO_MEM;
- port->irq = platp[i].irq;
- port->ops = &altera_jtaguart_ops;
- port->flags = ASYNC_BOOT_AUTOCONF;
+ if (i >= ALTERA_JTAGUART_MAXPORTS)
+ return -EINVAL;
- uart_add_one_port(&altera_jtaguart_driver, port);
- }
+ port = &altera_jtaguart_ports[i].port;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_mem)
+ port->mapbase = res_mem->start;
+ else if (platp)
+ port->mapbase = platp->mapbase;
+ else
+ return -ENODEV;
+
+ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res_irq)
+ port->irq = res_irq->start;
+ else if (platp)
+ port->irq = platp->irq;
+ else
+ return -ENODEV;
+
+ port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+ if (!port->membase)
+ return -ENOMEM;
+
+ port->line = i;
+ port->type = PORT_ALTERA_JTAGUART;
+ port->iotype = SERIAL_IO_MEM;
+ port->ops = &altera_jtaguart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+
+ uart_add_one_port(&altera_jtaguart_driver, port);
return 0;
}
@@ -454,13 +455,13 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
{
struct uart_port *port;
- int i;
+ int i = pdev->id;
- for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
- port = &altera_jtaguart_ports[i].port;
- if (port)
- uart_remove_one_port(&altera_jtaguart_driver, port);
- }
+ if (i == -1)
+ i = 0;
+
+ port = &altera_jtaguart_ports[i].port;
+ uart_remove_one_port(&altera_jtaguart_driver, port);
return 0;
}
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 721216292a5..3a573528555 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -86,16 +86,12 @@ struct altera_uart {
static u32 altera_uart_readl(struct uart_port *port, int reg)
{
- struct altera_uart_platform_uart *platp = port->private_data;
-
- return readl(port->membase + (reg << platp->bus_shift));
+ return readl(port->membase + (reg << port->regshift));
}
static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
{
- struct altera_uart_platform_uart *platp = port->private_data;
-
- writel(dat, port->membase + (reg << platp->bus_shift));
+ writel(dat, port->membase + (reg << port->regshift));
}
static unsigned int altera_uart_tx_empty(struct uart_port *port)
@@ -546,13 +542,17 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
if (!port->membase)
return -ENOMEM;
+ if (platp)
+ port->regshift = platp->bus_shift;
+ else
+ port->regshift = 0;
+
port->line = i;
port->type = PORT_ALTERA_UART;
port->iotype = SERIAL_IO_MEM;
port->uartclk = platp->uartclk;
port->ops = &altera_uart_ops;
port->flags = UPF_BOOT_AUTOCONF;
- port->private_data = platp;
uart_add_one_port(&altera_uart_driver, port);
@@ -561,9 +561,15 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
static int __devexit altera_uart_remove(struct platform_device *pdev)
{
- struct uart_port *port = &altera_uart_ports[pdev->id].port;
+ struct uart_port *port;
+ int i = pdev->id;
+ if (i == -1)
+ i = 0;
+
+ port = &altera_uart_ports[i].port;
uart_remove_one_port(&altera_uart_driver, port);
+
return 0;
}
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2a1d52fb493..f119d176110 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&port->lock, flags);
}
+static void atmel_set_ldisc(struct uart_port *port, int new)
+{
+ int line = port->line;
+
+ if (line >= port->state->port.tty->driver->num)
+ return;
+
+ if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+ port->flags |= UPF_HARDPPS_CD;
+ atmel_enable_ms(port);
+ } else {
+ port->flags &= ~UPF_HARDPPS_CD;
+ }
+}
+
/*
* Return string describing the specified port
*/
@@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = {
.shutdown = atmel_shutdown,
.flush_buffer = atmel_flush_buffer,
.set_termios = atmel_set_termios,
+ .set_ldisc = atmel_set_ldisc,
.type = atmel_type,
.release_port = atmel_release_port,
.request_port = atmel_request_port,
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e95c524d9d1..c3ec0a61d85 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
sport->port.mapbase = res->start;
sport->port.irq = platform_get_irq(pdev, 0);
- if (sport->port.irq < 0) {
+ if ((int)sport->port.irq < 0) {
dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
ret = -ENOENT;
goto out_error_unmap;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index bcc31f2140a..225123b37f1 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state)
}
static int
-rs_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
unsigned long flags;
@@ -3614,7 +3613,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file,
}
static int
-rs_tiocmget(struct tty_struct *tty, struct file *file)
+rs_tiocmget(struct tty_struct *tty)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
unsigned int result;
@@ -3648,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file)
static int
-rs_ioctl(struct tty_struct *tty, struct file * file,
+rs_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct e100_serial * info = (struct e100_serial *)tty->driver_data;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ab93763862d..8ee5a41d340 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -8,7 +8,7 @@
* Jan Dumon <j.dumon@option.com>
*
* Copyright (C) 2009, 2010 Intel Corp
- * Russ Gorby <richardx.r.gorby@intel.com>
+ * Russ Gorby <russ.gorby@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -67,6 +67,7 @@
#define IFX_SPI_MORE_MASK 0x10
#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */
#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */
+#define IFX_SPI_MODE SPI_MODE_1
#define IFX_SPI_TTY_ID 0
#define IFX_SPI_TIMEOUT_SEC 2
#define IFX_SPI_HEADER_0 (-1)
@@ -76,7 +77,7 @@
static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
/* local variables */
-static int spi_b16 = 1; /* 8 or 16 bit word length */
+static int spi_bpw = 16; /* 8, 16 or 32 bit word length */
static struct tty_driver *tty_drv;
static struct ifx_spi_device *saved_ifx_dev;
static struct lock_class_key ifx_spi_key;
@@ -244,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg)
* Map the signal state into Linux modem flags and report the value
* in Linux terms
*/
-static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
+static int ifx_spi_tiocmget(struct tty_struct *tty)
{
unsigned int value;
struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -262,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
/**
* ifx_spi_tiocmset - set modem bits
* @tty: the tty structure
- * @filp: file handle issuing the request
* @set: bits to set
* @clear: bits to clear
*
@@ -271,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
*
* FIXME: do we need to kick the tranfers when we do this ?
*/
-static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp,
+static int ifx_spi_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -722,9 +722,9 @@ static void ifx_spi_io(unsigned long data)
/* note len is BYTES, not transfers */
ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
ifx_dev->spi_xfer.cs_change = 0;
- ifx_dev->spi_xfer.speed_hz = 12500000;
+ ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
/* ifx_dev->spi_xfer.speed_hz = 390625; */
- ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8;
+ ifx_dev->spi_xfer.bits_per_word = spi_bpw;
ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
@@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data)
/*
* setup dma pointers
*/
- if (ifx_dev->is_6160) {
+ if (ifx_dev->use_dma) {
ifx_dev->spi_msg.is_dma_mapped = 1;
ifx_dev->tx_dma = ifx_dev->tx_bus;
ifx_dev->rx_dma = ifx_dev->rx_bus;
@@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
goto error_ret;
}
- pport->ops = &ifx_tty_port_ops;
tty_port_init(pport);
+ pport->ops = &ifx_tty_port_ops;
ifx_dev->minor = IFX_SPI_TTY_ID;
ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
&ifx_dev->spi_dev->dev);
@@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
{
int ret;
int srdy;
- struct ifx_modem_platform_data *pl_data = NULL;
+ struct ifx_modem_platform_data *pl_data;
struct ifx_spi_device *ifx_dev;
if (saved_ifx_dev) {
@@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
return -ENODEV;
}
+ pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+ if (!pl_data) {
+ dev_err(&spi->dev, "missing platform data!");
+ return -ENODEV;
+ }
+
/* initialize structure to hold our device variables */
ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
if (!ifx_dev) {
@@ -983,14 +989,25 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
init_timer(&ifx_dev->spi_timer);
ifx_dev->spi_timer.function = ifx_spi_timeout;
ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
- ifx_dev->is_6160 = pl_data->is_6160;
+ ifx_dev->modem = pl_data->modem_type;
+ ifx_dev->use_dma = pl_data->use_dma;
+ ifx_dev->max_hz = pl_data->max_hz;
+ /* initialize spi mode, etc */
+ spi->max_speed_hz = ifx_dev->max_hz;
+ spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode);
+ spi->bits_per_word = spi_bpw;
+ ret = spi_setup(spi);
+ if (ret) {
+ dev_err(&spi->dev, "SPI setup wasn't successful %d", ret);
+ return -ENODEV;
+ }
/* ensure SPI protocol flags are initialized to enable transfer */
ifx_dev->spi_more = 0;
ifx_dev->spi_slave_cts = 0;
/*initialize transfer and dma buffers */
- ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+ ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
IFX_SPI_TRANSFER_SIZE,
&ifx_dev->tx_bus,
GFP_KERNEL);
@@ -999,7 +1016,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
ret = -ENOMEM;
goto error_ret;
}
- ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+ ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
IFX_SPI_TRANSFER_SIZE,
&ifx_dev->rx_bus,
GFP_KERNEL);
@@ -1025,18 +1042,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
goto error_ret;
}
- pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
- if (pl_data) {
- ifx_dev->gpio.reset = pl_data->rst_pmu;
- ifx_dev->gpio.po = pl_data->pwr_on;
- ifx_dev->gpio.mrdy = pl_data->mrdy;
- ifx_dev->gpio.srdy = pl_data->srdy;
- ifx_dev->gpio.reset_out = pl_data->rst_out;
- } else {
- dev_err(&spi->dev, "missing platform data!");
- ret = -ENODEV;
- goto error_ret;
- }
+ ifx_dev->gpio.reset = pl_data->rst_pmu;
+ ifx_dev->gpio.po = pl_data->pwr_on;
+ ifx_dev->gpio.mrdy = pl_data->mrdy;
+ ifx_dev->gpio.srdy = pl_data->srdy;
+ ifx_dev->gpio.reset_out = pl_data->rst_out;
dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
@@ -1322,9 +1332,9 @@ static const struct spi_device_id ifx_id_table[] = {
MODULE_DEVICE_TABLE(spi, ifx_id_table);
/* spi operations */
-static const struct spi_driver ifx_spi_driver_6160 = {
+static const struct spi_driver ifx_spi_driver = {
.driver = {
- .name = "ifx6160",
+ .name = DRVNAME,
.bus = &spi_bus_type,
.pm = &ifx_spi_pm,
.owner = THIS_MODULE},
@@ -1346,7 +1356,7 @@ static void __exit ifx_spi_exit(void)
{
/* unregister */
tty_unregister_driver(tty_drv);
- spi_unregister_driver((void *)&ifx_spi_driver_6160);
+ spi_unregister_driver((void *)&ifx_spi_driver);
}
/**
@@ -1388,7 +1398,7 @@ static int __init ifx_spi_init(void)
return result;
}
- result = spi_register_driver((void *)&ifx_spi_driver_6160);
+ result = spi_register_driver((void *)&ifx_spi_driver);
if (result) {
pr_err("%s: spi_register_driver failed(%d)",
DRVNAME, result);
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index deb7b8d977d..e8464baf9e7 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -29,8 +29,6 @@
#define DRVNAME "ifx6x60"
#define TTYNAME "ttyIFX"
-/* #define IFX_THROTTLE_CODE */
-
#define IFX_SPI_MAX_MINORS 1
#define IFX_SPI_TRANSFER_SIZE 2048
#define IFX_SPI_FIFO_SIZE 4096
@@ -88,7 +86,9 @@ struct ifx_spi_device {
dma_addr_t rx_dma;
dma_addr_t tx_dma;
- int is_6160; /* Modem type */
+ int modem; /* Modem type */
+ int use_dma; /* provide dma-able addrs in SPI msg */
+ long max_hz; /* max SPI frequency */
spinlock_t write_lock;
int write_pending;
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index d40010a22ec..c111f36f5d2 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -16,9 +16,7 @@
* 2/3 chan to port 1, 4/5 chan to port 3. Even number chans
* are used for RX, odd chans for TX
*
- * 2. In A0 stepping, UART will not support TX half empty flag
- *
- * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
* asserted, only when the HW is reset the DDCD and DDSR will
* be triggered
*/
@@ -41,8 +39,6 @@
#include <linux/io.h>
#include <linux/debugfs.h>
-#define MFD_HSU_A0_STEPPING 1
-
#define HSU_DMA_BUF_SIZE 2048
#define chan_readl(chan, offset) readl(chan->reg + offset)
@@ -51,7 +47,10 @@
#define mfd_readl(obj, offset) readl(obj->reg + offset)
#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset)
-#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10)
+static int hsu_dma_enable;
+module_param(hsu_dma_enable, int, 0);
+MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \
+bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
struct hsu_dma_buffer {
u8 *buf;
@@ -65,7 +64,6 @@ struct hsu_dma_chan {
enum dma_data_direction dirt;
struct uart_hsu_port *uport;
void __iomem *reg;
- struct timer_list rx_timer; /* only needed by RX channel */
};
struct uart_hsu_port {
@@ -355,8 +353,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf
| (0x1 << 24) /* timeout bit, see HSU Errata 1 */
);
chan_writel(rxc, HSU_CH_CR, 0x3);
-
- mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
}
/* Protected by spin_lock_irqsave(port->lock) */
@@ -420,7 +416,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
chan_writel(chan, HSU_CH_CR, 0x3);
return;
}
- del_timer(&chan->rx_timer);
dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
dbuf->dma_size, DMA_FROM_DEVICE);
@@ -448,8 +443,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
tty_flip_buffer_push(tty);
chan_writel(chan, HSU_CH_CR, 0x3);
- chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
- add_timer(&chan->rx_timer);
}
@@ -551,16 +544,9 @@ static void transmit_chars(struct uart_hsu_port *up)
return;
}
-#ifndef MFD_HSU_A0_STEPPING
+ /* The IRQ is for TX FIFO half-empty */
count = up->port.fifosize / 2;
-#else
- /*
- * A0 only supports fully empty IRQ, and the first char written
- * into it won't clear the EMPT bit, so we may need be cautious
- * by useing a shorter buffer
- */
- count = up->port.fifosize - 4;
-#endif
+
do {
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -769,9 +755,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
/*
* What special to do:
* 1. chose the 64B fifo mode
- * 2. make sure not to select half empty mode for A0 stepping
- * 3. start dma or pio depends on configuration
- * 4. we only allocate dma memory when needed
+ * 2. start dma or pio depends on configuration
+ * 3. we only allocate dma memory when needed
*/
static int serial_hsu_startup(struct uart_port *port)
{
@@ -870,8 +855,6 @@ static void serial_hsu_shutdown(struct uart_port *port)
container_of(port, struct uart_hsu_port, port);
unsigned long flags;
- del_timer_sync(&up->rxc->rx_timer);
-
/* Disable interrupts from this port */
up->ier = 0;
serial_out(up, UART_IER, 0);
@@ -977,10 +960,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
fcr |= UART_FCR_HSU_64B_FIFO;
-#ifdef MFD_HSU_A0_STEPPING
- /* A0 doesn't support half empty IRQ */
- fcr |= UART_FCR_FULL_EMPT_TXI;
-#endif
/*
* Ok, we're now changing the port state. Do it with
@@ -1343,28 +1322,6 @@ err_disable:
return ret;
}
-static void hsu_dma_rx_timeout(unsigned long data)
-{
- struct hsu_dma_chan *chan = (void *)data;
- struct uart_hsu_port *up = chan->uport;
- struct hsu_dma_buffer *dbuf = &up->rxbuf;
- int count = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
-
- if (!count) {
- mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
- goto exit;
- }
-
- hsu_dma_rx(up, 0);
-exit:
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
static void hsu_global_init(void)
{
struct hsu_port *hsu;
@@ -1415,6 +1372,12 @@ static void hsu_global_init(void)
serial_hsu_ports[i] = uport;
uport->index = i;
+
+ if (hsu_dma_enable & (1<<i))
+ uport->use_dma = 1;
+ else
+ uport->use_dma = 0;
+
uport++;
}
@@ -1427,12 +1390,6 @@ static void hsu_global_init(void)
dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
i * HSU_DMA_CHANS_REG_LENGTH;
- /* Work around for RX */
- if (dchan->dirt == DMA_FROM_DEVICE) {
- init_timer(&dchan->rx_timer);
- dchan->rx_timer.function = hsu_dma_rx_timeout;
- dchan->rx_timer.data = (unsigned long)dchan;
- }
dchan++;
}
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index b62857bf2fd..37e13c3d91d 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -51,7 +51,7 @@
struct uart_max3110 {
struct uart_port port;
struct spi_device *spi;
- char name[24];
+ char name[SPI_NAME_SIZE];
wait_queue_head_t wq;
struct task_struct *main_thread;
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
new file mode 100644
index 00000000000..2e7fc9cee9c
--- /dev/null
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -0,0 +1,1880 @@
+/*
+ * MSM 7k/8k High speed uart driver
+ *
+ * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2008 Google Inc.
+ * Modified: Nick Pelly <npelly@google.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * Has optional support for uart power management independent of linux
+ * suspend/resume:
+ *
+ * RX wakeup.
+ * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the
+ * UART RX pin). This should only be used if there is not a wakeup
+ * GPIO on the UART CTS, and the first RX byte is known (for example, with the
+ * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will
+ * always be lost. RTS will be asserted even while the UART is off in this mode
+ * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq.
+ */
+
+#include <linux/module.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/atomic.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <linux/platform_data/msm_serial_hs.h>
+
+/* HSUART Registers */
+#define UARTDM_MR1_ADDR 0x0
+#define UARTDM_MR2_ADDR 0x4
+
+/* Data Mover result codes */
+#define RSLT_FIFO_CNTR_BMSK (0xE << 28)
+#define RSLT_VLD BIT(1)
+
+/* write only register */
+#define UARTDM_CSR_ADDR 0x8
+#define UARTDM_CSR_115200 0xFF
+#define UARTDM_CSR_57600 0xEE
+#define UARTDM_CSR_38400 0xDD
+#define UARTDM_CSR_28800 0xCC
+#define UARTDM_CSR_19200 0xBB
+#define UARTDM_CSR_14400 0xAA
+#define UARTDM_CSR_9600 0x99
+#define UARTDM_CSR_7200 0x88
+#define UARTDM_CSR_4800 0x77
+#define UARTDM_CSR_3600 0x66
+#define UARTDM_CSR_2400 0x55
+#define UARTDM_CSR_1200 0x44
+#define UARTDM_CSR_600 0x33
+#define UARTDM_CSR_300 0x22
+#define UARTDM_CSR_150 0x11
+#define UARTDM_CSR_75 0x00
+
+/* write only register */
+#define UARTDM_TF_ADDR 0x70
+#define UARTDM_TF2_ADDR 0x74
+#define UARTDM_TF3_ADDR 0x78
+#define UARTDM_TF4_ADDR 0x7C
+
+/* write only register */
+#define UARTDM_CR_ADDR 0x10
+#define UARTDM_IMR_ADDR 0x14
+
+#define UARTDM_IPR_ADDR 0x18
+#define UARTDM_TFWR_ADDR 0x1c
+#define UARTDM_RFWR_ADDR 0x20
+#define UARTDM_HCR_ADDR 0x24
+#define UARTDM_DMRX_ADDR 0x34
+#define UARTDM_IRDA_ADDR 0x38
+#define UARTDM_DMEN_ADDR 0x3c
+
+/* UART_DM_NO_CHARS_FOR_TX */
+#define UARTDM_NCF_TX_ADDR 0x40
+
+#define UARTDM_BADR_ADDR 0x44
+
+#define UARTDM_SIM_CFG_ADDR 0x80
+/* Read Only register */
+#define UARTDM_SR_ADDR 0x8
+
+/* Read Only register */
+#define UARTDM_RF_ADDR 0x70
+#define UARTDM_RF2_ADDR 0x74
+#define UARTDM_RF3_ADDR 0x78
+#define UARTDM_RF4_ADDR 0x7C
+
+/* Read Only register */
+#define UARTDM_MISR_ADDR 0x10
+
+/* Read Only register */
+#define UARTDM_ISR_ADDR 0x14
+#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38
+
+#define UARTDM_RXFS_ADDR 0x50
+
+/* Register field Mask Mapping */
+#define UARTDM_SR_PAR_FRAME_BMSK BIT(5)
+#define UARTDM_SR_OVERRUN_BMSK BIT(4)
+#define UARTDM_SR_TXEMT_BMSK BIT(3)
+#define UARTDM_SR_TXRDY_BMSK BIT(2)
+#define UARTDM_SR_RXRDY_BMSK BIT(0)
+
+#define UARTDM_CR_TX_DISABLE_BMSK BIT(3)
+#define UARTDM_CR_RX_DISABLE_BMSK BIT(1)
+#define UARTDM_CR_TX_EN_BMSK BIT(2)
+#define UARTDM_CR_RX_EN_BMSK BIT(0)
+
+/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */
+#define RESET_RX 0x10
+#define RESET_TX 0x20
+#define RESET_ERROR_STATUS 0x30
+#define RESET_BREAK_INT 0x40
+#define START_BREAK 0x50
+#define STOP_BREAK 0x60
+#define RESET_CTS 0x70
+#define RESET_STALE_INT 0x80
+#define RFR_LOW 0xD0
+#define RFR_HIGH 0xE0
+#define CR_PROTECTION_EN 0x100
+#define STALE_EVENT_ENABLE 0x500
+#define STALE_EVENT_DISABLE 0x600
+#define FORCE_STALE_EVENT 0x400
+#define CLEAR_TX_READY 0x300
+#define RESET_TX_ERROR 0x800
+#define RESET_TX_DONE 0x810
+
+#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00
+#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f
+#define UARTDM_MR1_CTS_CTL_BMSK 0x40
+#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80
+
+#define UARTDM_MR2_ERROR_MODE_BMSK 0x40
+#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30
+
+/* bits per character configuration */
+#define FIVE_BPC (0 << 4)
+#define SIX_BPC (1 << 4)
+#define SEVEN_BPC (2 << 4)
+#define EIGHT_BPC (3 << 4)
+
+#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc
+#define STOP_BIT_ONE (1 << 2)
+#define STOP_BIT_TWO (3 << 2)
+
+#define UARTDM_MR2_PARITY_MODE_BMSK 0x3
+
+/* Parity configuration */
+#define NO_PARITY 0x0
+#define EVEN_PARITY 0x1
+#define ODD_PARITY 0x2
+#define SPACE_PARITY 0x3
+
+#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80
+#define UARTDM_IPR_STALE_LSB_BMSK 0x1f
+
+/* These can be used for both ISR and IMR register */
+#define UARTDM_ISR_TX_READY_BMSK BIT(7)
+#define UARTDM_ISR_CURRENT_CTS_BMSK BIT(6)
+#define UARTDM_ISR_DELTA_CTS_BMSK BIT(5)
+#define UARTDM_ISR_RXLEV_BMSK BIT(4)
+#define UARTDM_ISR_RXSTALE_BMSK BIT(3)
+#define UARTDM_ISR_RXBREAK_BMSK BIT(2)
+#define UARTDM_ISR_RXHUNT_BMSK BIT(1)
+#define UARTDM_ISR_TXLEV_BMSK BIT(0)
+
+/* Field definitions for UART_DM_DMEN*/
+#define UARTDM_TX_DM_EN_BMSK 0x1
+#define UARTDM_RX_DM_EN_BMSK 0x2
+
+#define UART_FIFOSIZE 64
+#define UARTCLK 7372800
+
+/* Rx DMA request states */
+enum flush_reason {
+ FLUSH_NONE,
+ FLUSH_DATA_READY,
+ FLUSH_DATA_INVALID, /* values after this indicate invalid data */
+ FLUSH_IGNORE = FLUSH_DATA_INVALID,
+ FLUSH_STOP,
+ FLUSH_SHUTDOWN,
+};
+
+/* UART clock states */
+enum msm_hs_clk_states_e {
+ MSM_HS_CLK_PORT_OFF, /* port not in use */
+ MSM_HS_CLK_OFF, /* clock disabled */
+ MSM_HS_CLK_REQUEST_OFF, /* disable after TX and RX flushed */
+ MSM_HS_CLK_ON, /* clock enabled */
+};
+
+/* Track the forced RXSTALE flush during clock off sequence.
+ * These states are only valid during MSM_HS_CLK_REQUEST_OFF */
+enum msm_hs_clk_req_off_state_e {
+ CLK_REQ_OFF_START,
+ CLK_REQ_OFF_RXSTALE_ISSUED,
+ CLK_REQ_OFF_FLUSH_ISSUED,
+ CLK_REQ_OFF_RXSTALE_FLUSHED,
+};
+
+/**
+ * struct msm_hs_tx
+ * @tx_ready_int_en: ok to dma more tx?
+ * @dma_in_flight: tx dma in progress
+ * @xfer: top level DMA command pointer structure
+ * @command_ptr: third level command struct pointer
+ * @command_ptr_ptr: second level command list struct pointer
+ * @mapped_cmd_ptr: DMA view of third level command struct
+ * @mapped_cmd_ptr_ptr: DMA view of second level command list struct
+ * @tx_count: number of bytes to transfer in DMA transfer
+ * @dma_base: DMA view of UART xmit buffer
+ *
+ * This structure describes a single Tx DMA transaction. MSM DMA
+ * commands have two levels of indirection. The top level command
+ * ptr points to a list of command ptr which in turn points to a
+ * single DMA 'command'. In our case each Tx transaction consists
+ * of a single second level pointer pointing to a 'box type' command.
+ */
+struct msm_hs_tx {
+ unsigned int tx_ready_int_en;
+ unsigned int dma_in_flight;
+ struct msm_dmov_cmd xfer;
+ dmov_box *command_ptr;
+ u32 *command_ptr_ptr;
+ dma_addr_t mapped_cmd_ptr;
+ dma_addr_t mapped_cmd_ptr_ptr;
+ int tx_count;
+ dma_addr_t dma_base;
+};
+
+/**
+ * struct msm_hs_rx
+ * @flush: Rx DMA request state
+ * @xfer: top level DMA command pointer structure
+ * @cmdptr_dmaaddr: DMA view of second level command structure
+ * @command_ptr: third level DMA command pointer structure
+ * @command_ptr_ptr: second level DMA command list pointer
+ * @mapped_cmd_ptr: DMA view of the third level command structure
+ * @wait: wait for DMA completion before shutdown
+ * @buffer: destination buffer for RX DMA
+ * @rbuffer: DMA view of buffer
+ * @pool: dma pool out of which coherent rx buffer is allocated
+ * @tty_work: private work-queue for tty flip buffer push task
+ *
+ * This structure describes a single Rx DMA transaction. Rx DMA
+ * transactions use box mode DMA commands.
+ */
+struct msm_hs_rx {
+ enum flush_reason flush;
+ struct msm_dmov_cmd xfer;
+ dma_addr_t cmdptr_dmaaddr;
+ dmov_box *command_ptr;
+ u32 *command_ptr_ptr;
+ dma_addr_t mapped_cmd_ptr;
+ wait_queue_head_t wait;
+ dma_addr_t rbuffer;
+ unsigned char *buffer;
+ struct dma_pool *pool;
+ struct work_struct tty_work;
+};
+
+/**
+ * struct msm_hs_rx_wakeup
+ * @irq: IRQ line to be configured as interrupt source on Rx activity
+ * @ignore: boolean value. 1 = ignore the wakeup interrupt
+ * @rx_to_inject: extra character to be inserted to Rx tty on wakeup
+ * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character
+ *
+ * This is an optional structure required for UART Rx GPIO IRQ based
+ * wakeup from low power state. UART wakeup can be triggered by RX activity
+ * (using a wakeup GPIO on the UART RX pin). This should only be used if
+ * there is not a wakeup GPIO on the UART CTS, and the first RX byte is
+ * known (eg., with the Bluetooth Texas Instruments HCILL protocol),
+ * since the first RX byte will always be lost. RTS will be asserted even
+ * while the UART is clocked off in this mode of operation.
+ */
+struct msm_hs_rx_wakeup {
+ int irq; /* < 0 indicates low power wakeup disabled */
+ unsigned char ignore;
+ unsigned char inject_rx;
+ char rx_to_inject;
+};
+
+/**
+ * struct msm_hs_port
+ * @uport: embedded uart port structure
+ * @imr_reg: shadow value of UARTDM_IMR
+ * @clk: uart input clock handle
+ * @tx: Tx transaction related data structure
+ * @rx: Rx transaction related data structure
+ * @dma_tx_channel: Tx DMA command channel
+ * @dma_rx_channel Rx DMA command channel
+ * @dma_tx_crci: Tx channel rate control interface number
+ * @dma_rx_crci: Rx channel rate control interface number
+ * @clk_off_timer: Timer to poll DMA event completion before clock off
+ * @clk_off_delay: clk_off_timer poll interval
+ * @clk_state: overall clock state
+ * @clk_req_off_state: post flush clock states
+ * @rx_wakeup: optional rx_wakeup feature related data
+ * @exit_lpm_cb: optional callback to exit low power mode
+ *
+ * Low level serial port structure.
+ */
+struct msm_hs_port {
+ struct uart_port uport;
+ unsigned long imr_reg;
+ struct clk *clk;
+ struct msm_hs_tx tx;
+ struct msm_hs_rx rx;
+
+ int dma_tx_channel;
+ int dma_rx_channel;
+ int dma_tx_crci;
+ int dma_rx_crci;
+
+ struct hrtimer clk_off_timer;
+ ktime_t clk_off_delay;
+ enum msm_hs_clk_states_e clk_state;
+ enum msm_hs_clk_req_off_state_e clk_req_off_state;
+
+ struct msm_hs_rx_wakeup rx_wakeup;
+ void (*exit_lpm_cb)(struct uart_port *);
+};
+
+#define MSM_UARTDM_BURST_SIZE 16 /* DM burst size (in bytes) */
+#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE
+#define UARTDM_RX_BUF_SIZE 512
+
+#define UARTDM_NR 2
+
+static struct msm_hs_port q_uart_port[UARTDM_NR];
+static struct platform_driver msm_serial_hs_platform_driver;
+static struct uart_driver msm_hs_driver;
+static struct uart_ops msm_hs_ops;
+static struct workqueue_struct *msm_hs_workqueue;
+
+#define UARTDM_TO_MSM(uart_port) \
+ container_of((uart_port), struct msm_hs_port, uport)
+
+static unsigned int use_low_power_rx_wakeup(struct msm_hs_port
+ *msm_uport)
+{
+ return (msm_uport->rx_wakeup.irq >= 0);
+}
+
+static unsigned int msm_hs_read(struct uart_port *uport,
+ unsigned int offset)
+{
+ return ioread32(uport->membase + offset);
+}
+
+static void msm_hs_write(struct uart_port *uport, unsigned int offset,
+ unsigned int value)
+{
+ iowrite32(value, uport->membase + offset);
+}
+
+static void msm_hs_release_port(struct uart_port *port)
+{
+ iounmap(port->membase);
+}
+
+static int msm_hs_request_port(struct uart_port *port)
+{
+ port->membase = ioremap(port->mapbase, PAGE_SIZE);
+ if (unlikely(!port->membase))
+ return -ENOMEM;
+
+ /* configure the CR Protection to Enable */
+ msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN);
+ return 0;
+}
+
+static int __devexit msm_hs_remove(struct platform_device *pdev)
+{
+
+ struct msm_hs_port *msm_uport;
+ struct device *dev;
+
+ if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+ printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ msm_uport = &q_uart_port[pdev->id];
+ dev = msm_uport->uport.dev;
+
+ dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box),
+ DMA_TO_DEVICE);
+ dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+ msm_uport->rx.rbuffer);
+ dma_pool_destroy(msm_uport->rx.pool);
+
+ dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *),
+ DMA_TO_DEVICE);
+ dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *),
+ DMA_TO_DEVICE);
+ dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box),
+ DMA_TO_DEVICE);
+
+ uart_remove_one_port(&msm_hs_driver, &msm_uport->uport);
+ clk_put(msm_uport->clk);
+
+ /* Free the tx resources */
+ kfree(msm_uport->tx.command_ptr);
+ kfree(msm_uport->tx.command_ptr_ptr);
+
+ /* Free the rx resources */
+ kfree(msm_uport->rx.command_ptr);
+ kfree(msm_uport->rx.command_ptr_ptr);
+
+ iounmap(msm_uport->uport.membase);
+
+ return 0;
+}
+
+static int msm_hs_init_clk_locked(struct uart_port *uport)
+{
+ int ret;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ ret = clk_enable(msm_uport->clk);
+ if (ret) {
+ printk(KERN_ERR "Error could not turn on UART clk\n");
+ return ret;
+ }
+
+ /* Set up the MREG/NREG/DREG/MNDREG */
+ ret = clk_set_rate(msm_uport->clk, uport->uartclk);
+ if (ret) {
+ printk(KERN_WARNING "Error setting clock rate on UART\n");
+ clk_disable(msm_uport->clk);
+ return ret;
+ }
+
+ msm_uport->clk_state = MSM_HS_CLK_ON;
+ return 0;
+}
+
+/* Enable and Disable clocks (Used for power management) */
+static void msm_hs_pm(struct uart_port *uport, unsigned int state,
+ unsigned int oldstate)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ if (use_low_power_rx_wakeup(msm_uport) ||
+ msm_uport->exit_lpm_cb)
+ return; /* ignore linux PM states,
+ use msm_hs_request_clock API */
+
+ switch (state) {
+ case 0:
+ clk_enable(msm_uport->clk);
+ break;
+ case 3:
+ clk_disable(msm_uport->clk);
+ break;
+ default:
+ dev_err(uport->dev, "msm_serial: Unknown PM state %d\n",
+ state);
+ }
+}
+
+/*
+ * programs the UARTDM_CSR register with correct bit rates
+ *
+ * Interrupts should be disabled before we are called, as
+ * we modify Set Baud rate
+ * Set receive stale interrupt level, dependant on Bit Rate
+ * Goal is to have around 8 ms before indicate stale.
+ * roundup (((Bit Rate * .008) / 10) + 1
+ */
+static void msm_hs_set_bps_locked(struct uart_port *uport,
+ unsigned int bps)
+{
+ unsigned long rxstale;
+ unsigned long data;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ switch (bps) {
+ case 300:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75);
+ rxstale = 1;
+ break;
+ case 600:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150);
+ rxstale = 1;
+ break;
+ case 1200:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300);
+ rxstale = 1;
+ break;
+ case 2400:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600);
+ rxstale = 1;
+ break;
+ case 4800:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200);
+ rxstale = 1;
+ break;
+ case 9600:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+ rxstale = 2;
+ break;
+ case 14400:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600);
+ rxstale = 3;
+ break;
+ case 19200:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800);
+ rxstale = 4;
+ break;
+ case 28800:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200);
+ rxstale = 6;
+ break;
+ case 38400:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600);
+ rxstale = 8;
+ break;
+ case 57600:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400);
+ rxstale = 16;
+ break;
+ case 76800:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200);
+ rxstale = 16;
+ break;
+ case 115200:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800);
+ rxstale = 31;
+ break;
+ case 230400:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600);
+ rxstale = 31;
+ break;
+ case 460800:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+ rxstale = 31;
+ break;
+ case 4000000:
+ case 3686400:
+ case 3200000:
+ case 3500000:
+ case 3000000:
+ case 2500000:
+ case 1500000:
+ case 1152000:
+ case 1000000:
+ case 921600:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+ rxstale = 31;
+ break;
+ default:
+ msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+ /* default to 9600 */
+ bps = 9600;
+ rxstale = 2;
+ break;
+ }
+ if (bps > 460800)
+ uport->uartclk = bps * 16;
+ else
+ uport->uartclk = UARTCLK;
+
+ if (clk_set_rate(msm_uport->clk, uport->uartclk)) {
+ printk(KERN_WARNING "Error setting clock rate on UART\n");
+ return;
+ }
+
+ data = rxstale & UARTDM_IPR_STALE_LSB_BMSK;
+ data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2);
+
+ msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+}
+
+/*
+ * termios : new ktermios
+ * oldtermios: old ktermios previous setting
+ *
+ * Configure the serial port
+ */
+static void msm_hs_set_termios(struct uart_port *uport,
+ struct ktermios *termios,
+ struct ktermios *oldtermios)
+{
+ unsigned int bps;
+ unsigned long data;
+ unsigned long flags;
+ unsigned int c_cflag = termios->c_cflag;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ spin_lock_irqsave(&uport->lock, flags);
+ clk_enable(msm_uport->clk);
+
+ /* 300 is the minimum baud support by the driver */
+ bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000);
+
+ /* Temporary remapping 200 BAUD to 3.2 mbps */
+ if (bps == 200)
+ bps = 3200000;
+
+ msm_hs_set_bps_locked(uport, bps);
+
+ data = msm_hs_read(uport, UARTDM_MR2_ADDR);
+ data &= ~UARTDM_MR2_PARITY_MODE_BMSK;
+ /* set parity */
+ if (PARENB == (c_cflag & PARENB)) {
+ if (PARODD == (c_cflag & PARODD))
+ data |= ODD_PARITY;
+ else if (CMSPAR == (c_cflag & CMSPAR))
+ data |= SPACE_PARITY;
+ else
+ data |= EVEN_PARITY;
+ }
+
+ /* Set bits per char */
+ data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK;
+
+ switch (c_cflag & CSIZE) {
+ case CS5:
+ data |= FIVE_BPC;
+ break;
+ case CS6:
+ data |= SIX_BPC;
+ break;
+ case CS7:
+ data |= SEVEN_BPC;
+ break;
+ default:
+ data |= EIGHT_BPC;
+ break;
+ }
+ /* stop bits */
+ if (c_cflag & CSTOPB) {
+ data |= STOP_BIT_TWO;
+ } else {
+ /* otherwise 1 stop bit */
+ data |= STOP_BIT_ONE;
+ }
+ data |= UARTDM_MR2_ERROR_MODE_BMSK;
+ /* write parity/bits per char/stop bit configuration */
+ msm_hs_write(uport, UARTDM_MR2_ADDR, data);
+
+ /* Configure HW flow control */
+ data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+ data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK);
+
+ if (c_cflag & CRTSCTS) {
+ data |= UARTDM_MR1_CTS_CTL_BMSK;
+ data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+ }
+
+ msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+ uport->ignore_status_mask = termios->c_iflag & INPCK;
+ uport->ignore_status_mask |= termios->c_iflag & IGNPAR;
+ uport->read_status_mask = (termios->c_cflag & CREAD);
+
+ msm_hs_write(uport, UARTDM_IMR_ADDR, 0);
+
+ /* Set Transmit software time out */
+ uart_update_timeout(uport, c_cflag, bps);
+
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+
+ if (msm_uport->rx.flush == FLUSH_NONE) {
+ msm_uport->rx.flush = FLUSH_IGNORE;
+ msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+ }
+
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+ clk_disable(msm_uport->clk);
+ spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/*
+ * Standard API, Transmitter
+ * Any character in the transmit shift register is sent
+ */
+static unsigned int msm_hs_tx_empty(struct uart_port *uport)
+{
+ unsigned int data;
+ unsigned int ret = 0;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ clk_enable(msm_uport->clk);
+
+ data = msm_hs_read(uport, UARTDM_SR_ADDR);
+ if (data & UARTDM_SR_TXEMT_BMSK)
+ ret = TIOCSER_TEMT;
+
+ clk_disable(msm_uport->clk);
+
+ return ret;
+}
+
+/*
+ * Standard API, Stop transmitter.
+ * Any character in the transmit shift register is sent as
+ * well as the current data mover transfer .
+ */
+static void msm_hs_stop_tx_locked(struct uart_port *uport)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ msm_uport->tx.tx_ready_int_en = 0;
+}
+
+/*
+ * Standard API, Stop receiver as soon as possible.
+ *
+ * Function immediately terminates the operation of the
+ * channel receiver and any incoming characters are lost. None
+ * of the receiver status bits are affected by this command and
+ * characters that are already in the receive FIFO there.
+ */
+static void msm_hs_stop_rx_locked(struct uart_port *uport)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+ unsigned int data;
+
+ clk_enable(msm_uport->clk);
+
+ /* disable dlink */
+ data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+ data &= ~UARTDM_RX_DM_EN_BMSK;
+ msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+ /* Disable the receiver */
+ if (msm_uport->rx.flush == FLUSH_NONE)
+ msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+
+ if (msm_uport->rx.flush != FLUSH_SHUTDOWN)
+ msm_uport->rx.flush = FLUSH_STOP;
+
+ clk_disable(msm_uport->clk);
+}
+
+/* Transmit the next chunk of data */
+static void msm_hs_submit_tx_locked(struct uart_port *uport)
+{
+ int left;
+ int tx_count;
+ dma_addr_t src_addr;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+ struct msm_hs_tx *tx = &msm_uport->tx;
+ struct circ_buf *tx_buf = &msm_uport->uport.state->xmit;
+
+ if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) {
+ msm_hs_stop_tx_locked(uport);
+ return;
+ }
+
+ tx->dma_in_flight = 1;
+
+ tx_count = uart_circ_chars_pending(tx_buf);
+
+ if (UARTDM_TX_BUF_SIZE < tx_count)
+ tx_count = UARTDM_TX_BUF_SIZE;
+
+ left = UART_XMIT_SIZE - tx_buf->tail;
+
+ if (tx_count > left)
+ tx_count = left;
+
+ src_addr = tx->dma_base + tx_buf->tail;
+ dma_sync_single_for_device(uport->dev, src_addr, tx_count,
+ DMA_TO_DEVICE);
+
+ tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) |
+ ((tx_count + 15) >> 4);
+ tx->command_ptr->src_row_addr = src_addr;
+
+ dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr,
+ sizeof(dmov_box), DMA_TO_DEVICE);
+
+ *tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr);
+
+ dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr,
+ sizeof(u32 *), DMA_TO_DEVICE);
+
+ /* Save tx_count to use in Callback */
+ tx->tx_count = tx_count;
+ msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count);
+
+ /* Disable the tx_ready interrupt */
+ msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK;
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+ msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer);
+}
+
+/* Start to receive the next chunk of data */
+static void msm_hs_start_rx_locked(struct uart_port *uport)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+ msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE);
+ msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE);
+ msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK;
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+ msm_uport->rx.flush = FLUSH_NONE;
+ msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer);
+
+ /* might have finished RX and be ready to clock off */
+ hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay,
+ HRTIMER_MODE_REL);
+}
+
+/* Enable the transmitter Interrupt */
+static void msm_hs_start_tx_locked(struct uart_port *uport)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ clk_enable(msm_uport->clk);
+
+ if (msm_uport->exit_lpm_cb)
+ msm_uport->exit_lpm_cb(uport);
+
+ if (msm_uport->tx.tx_ready_int_en == 0) {
+ msm_uport->tx.tx_ready_int_en = 1;
+ msm_hs_submit_tx_locked(uport);
+ }
+
+ clk_disable(msm_uport->clk);
+}
+
+/*
+ * This routine is called when we are done with a DMA transfer
+ *
+ * This routine is registered with Data mover when we set
+ * up a Data Mover transfer. It is called from Data mover ISR
+ * when the DMA transfer is done.
+ */
+static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr,
+ unsigned int result,
+ struct msm_dmov_errdata *err)
+{
+ unsigned long flags;
+ struct msm_hs_port *msm_uport;
+
+ /* DMA did not finish properly */
+ WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) &&
+ !(result & RSLT_VLD));
+
+ msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer);
+
+ spin_lock_irqsave(&msm_uport->uport.lock, flags);
+ clk_enable(msm_uport->clk);
+
+ msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK;
+ msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+ clk_disable(msm_uport->clk);
+ spin_unlock_irqrestore(&msm_uport->uport.lock, flags);
+}
+
+/*
+ * This routine is called when we are done with a DMA transfer or the
+ * a flush has been sent to the data mover driver.
+ *
+ * This routine is registered with Data mover when we set up a Data Mover
+ * transfer. It is called from Data mover ISR when the DMA transfer is done.
+ */
+static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr,
+ unsigned int result,
+ struct msm_dmov_errdata *err)
+{
+ int retval;
+ int rx_count;
+ unsigned long status;
+ unsigned int error_f = 0;
+ unsigned long flags;
+ unsigned int flush;
+ struct tty_struct *tty;
+ struct uart_port *uport;
+ struct msm_hs_port *msm_uport;
+
+ msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer);
+ uport = &msm_uport->uport;
+
+ spin_lock_irqsave(&uport->lock, flags);
+ clk_enable(msm_uport->clk);
+
+ tty = uport->state->port.tty;
+
+ msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+
+ status = msm_hs_read(uport, UARTDM_SR_ADDR);
+
+ /* overflow is not connect to data in a FIFO */
+ if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) &&
+ (uport->read_status_mask & CREAD))) {
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ uport->icount.buf_overrun++;
+ error_f = 1;
+ }
+
+ if (!(uport->ignore_status_mask & INPCK))
+ status = status & ~(UARTDM_SR_PAR_FRAME_BMSK);
+
+ if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) {
+ /* Can not tell difference between parity & frame error */
+ uport->icount.parity++;
+ error_f = 1;
+ if (uport->ignore_status_mask & IGNPAR)
+ tty_insert_flip_char(tty, 0, TTY_PARITY);
+ }
+
+ if (error_f)
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+
+ if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED)
+ msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED;
+
+ flush = msm_uport->rx.flush;
+ if (flush == FLUSH_IGNORE)
+ msm_hs_start_rx_locked(uport);
+ if (flush == FLUSH_STOP)
+ msm_uport->rx.flush = FLUSH_SHUTDOWN;
+ if (flush >= FLUSH_DATA_INVALID)
+ goto out;
+
+ rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR);
+
+ if (0 != (uport->read_status_mask & CREAD)) {
+ retval = tty_insert_flip_string(tty, msm_uport->rx.buffer,
+ rx_count);
+ BUG_ON(retval != rx_count);
+ }
+
+ msm_hs_start_rx_locked(uport);
+
+out:
+ clk_disable(msm_uport->clk);
+
+ spin_unlock_irqrestore(&uport->lock, flags);
+
+ if (flush < FLUSH_DATA_INVALID)
+ queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+}
+
+static void msm_hs_tty_flip_buffer_work(struct work_struct *work)
+{
+ struct msm_hs_port *msm_uport =
+ container_of(work, struct msm_hs_port, rx.tty_work);
+ struct tty_struct *tty = msm_uport->uport.state->port.tty;
+
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * Standard API, Current states of modem control inputs
+ *
+ * Since CTS can be handled entirely by HARDWARE we always
+ * indicate clear to send and count on the TX FIFO to block when
+ * it fills up.
+ *
+ * - TIOCM_DCD
+ * - TIOCM_CTS
+ * - TIOCM_DSR
+ * - TIOCM_RI
+ * (Unsupported) DCD and DSR will return them high. RI will return low.
+ */
+static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport)
+{
+ return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
+}
+
+/*
+ * True enables UART auto RFR, which indicates we are ready for data if the RX
+ * buffer is not full. False disables auto RFR, and deasserts RFR to indicate
+ * we are not ready for data. Must be called with UART clock on.
+ */
+static void set_rfr_locked(struct uart_port *uport, int auto_rfr)
+{
+ unsigned int data;
+
+ data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+ if (auto_rfr) {
+ /* enable auto ready-for-receiving */
+ data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+ msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+ } else {
+ /* disable auto ready-for-receiving */
+ data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK;
+ msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+ /* RFR is active low, set high */
+ msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH);
+ }
+}
+
+/*
+ * Standard API, used to set or clear RFR
+ */
+static void msm_hs_set_mctrl_locked(struct uart_port *uport,
+ unsigned int mctrl)
+{
+ unsigned int auto_rfr;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ clk_enable(msm_uport->clk);
+
+ auto_rfr = TIOCM_RTS & mctrl ? 1 : 0;
+ set_rfr_locked(uport, auto_rfr);
+
+ clk_disable(msm_uport->clk);
+}
+
+/* Standard API, Enable modem status (CTS) interrupt */
+static void msm_hs_enable_ms_locked(struct uart_port *uport)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ clk_enable(msm_uport->clk);
+
+ /* Enable DELTA_CTS Interrupt */
+ msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK;
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+ clk_disable(msm_uport->clk);
+
+}
+
+/*
+ * Standard API, Break Signal
+ *
+ * Control the transmission of a break signal. ctl eq 0 => break
+ * signal terminate ctl ne 0 => start break signal
+ */
+static void msm_hs_break_ctl(struct uart_port *uport, int ctl)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ clk_enable(msm_uport->clk);
+ msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK);
+ clk_disable(msm_uport->clk);
+}
+
+static void msm_hs_config_port(struct uart_port *uport, int cfg_flags)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&uport->lock, flags);
+ if (cfg_flags & UART_CONFIG_TYPE) {
+ uport->type = PORT_MSM;
+ msm_hs_request_port(uport);
+ }
+ spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/* Handle CTS changes (Called from interrupt handler) */
+static void msm_hs_handle_delta_cts(struct uart_port *uport)
+{
+ unsigned long flags;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ spin_lock_irqsave(&uport->lock, flags);
+ clk_enable(msm_uport->clk);
+
+ /* clear interrupt */
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+ uport->icount.cts++;
+
+ clk_disable(msm_uport->clk);
+ spin_unlock_irqrestore(&uport->lock, flags);
+
+ /* clear the IOCTL TIOCMIWAIT if called */
+ wake_up_interruptible(&uport->state->port.delta_msr_wait);
+}
+
+/* check if the TX path is flushed, and if so clock off
+ * returns 0 did not clock off, need to retry (still sending final byte)
+ * -1 did not clock off, do not retry
+ * 1 if we clocked off
+ */
+static int msm_hs_check_clock_off_locked(struct uart_port *uport)
+{
+ unsigned long sr_status;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+ struct circ_buf *tx_buf = &uport->state->xmit;
+
+ /* Cancel if tx tty buffer is not empty, dma is in flight,
+ * or tx fifo is not empty, or rx fifo is not empty */
+ if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF ||
+ !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight ||
+ (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) ||
+ !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK)) {
+ return -1;
+ }
+
+ /* Make sure the uart is finished with the last byte */
+ sr_status = msm_hs_read(uport, UARTDM_SR_ADDR);
+ if (!(sr_status & UARTDM_SR_TXEMT_BMSK))
+ return 0; /* retry */
+
+ /* Make sure forced RXSTALE flush complete */
+ switch (msm_uport->clk_req_off_state) {
+ case CLK_REQ_OFF_START:
+ msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED;
+ msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT);
+ return 0; /* RXSTALE flush not complete - retry */
+ case CLK_REQ_OFF_RXSTALE_ISSUED:
+ case CLK_REQ_OFF_FLUSH_ISSUED:
+ return 0; /* RXSTALE flush not complete - retry */
+ case CLK_REQ_OFF_RXSTALE_FLUSHED:
+ break; /* continue */
+ }
+
+ if (msm_uport->rx.flush != FLUSH_SHUTDOWN) {
+ if (msm_uport->rx.flush == FLUSH_NONE)
+ msm_hs_stop_rx_locked(uport);
+ return 0; /* come back later to really clock off */
+ }
+
+ /* we really want to clock off */
+ clk_disable(msm_uport->clk);
+ msm_uport->clk_state = MSM_HS_CLK_OFF;
+
+ if (use_low_power_rx_wakeup(msm_uport)) {
+ msm_uport->rx_wakeup.ignore = 1;
+ enable_irq(msm_uport->rx_wakeup.irq);
+ }
+ return 1;
+}
+
+static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer)
+{
+ unsigned long flags;
+ int ret = HRTIMER_NORESTART;
+ struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port,
+ clk_off_timer);
+ struct uart_port *uport = &msm_uport->uport;
+
+ spin_lock_irqsave(&uport->lock, flags);
+
+ if (!msm_hs_check_clock_off_locked(uport)) {
+ hrtimer_forward_now(timer, msm_uport->clk_off_delay);
+ ret = HRTIMER_RESTART;
+ }
+
+ spin_unlock_irqrestore(&uport->lock, flags);
+
+ return ret;
+}
+
+static irqreturn_t msm_hs_isr(int irq, void *dev)
+{
+ unsigned long flags;
+ unsigned long isr_status;
+ struct msm_hs_port *msm_uport = dev;
+ struct uart_port *uport = &msm_uport->uport;
+ struct circ_buf *tx_buf = &uport->state->xmit;
+ struct msm_hs_tx *tx = &msm_uport->tx;
+ struct msm_hs_rx *rx = &msm_uport->rx;
+
+ spin_lock_irqsave(&uport->lock, flags);
+
+ isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR);
+
+ /* Uart RX starting */
+ if (isr_status & UARTDM_ISR_RXLEV_BMSK) {
+ msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK;
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+ }
+ /* Stale rx interrupt */
+ if (isr_status & UARTDM_ISR_RXSTALE_BMSK) {
+ msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+
+ if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED)
+ msm_uport->clk_req_off_state =
+ CLK_REQ_OFF_FLUSH_ISSUED;
+ if (rx->flush == FLUSH_NONE) {
+ rx->flush = FLUSH_DATA_READY;
+ msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+ }
+ }
+ /* tx ready interrupt */
+ if (isr_status & UARTDM_ISR_TX_READY_BMSK) {
+ /* Clear TX Ready */
+ msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY);
+
+ if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) {
+ msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+ msm_hs_write(uport, UARTDM_IMR_ADDR,
+ msm_uport->imr_reg);
+ }
+
+ /* Complete DMA TX transactions and submit new transactions */
+ tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE;
+
+ tx->dma_in_flight = 0;
+
+ uport->icount.tx += tx->tx_count;
+ if (tx->tx_ready_int_en)
+ msm_hs_submit_tx_locked(uport);
+
+ if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS)
+ uart_write_wakeup(uport);
+ }
+ if (isr_status & UARTDM_ISR_TXLEV_BMSK) {
+ /* TX FIFO is empty */
+ msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK;
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+ if (!msm_hs_check_clock_off_locked(uport))
+ hrtimer_start(&msm_uport->clk_off_timer,
+ msm_uport->clk_off_delay,
+ HRTIMER_MODE_REL);
+ }
+
+ /* Change in CTS interrupt */
+ if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK)
+ msm_hs_handle_delta_cts(uport);
+
+ spin_unlock_irqrestore(&uport->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+void msm_hs_request_clock_off_locked(struct uart_port *uport)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ if (msm_uport->clk_state == MSM_HS_CLK_ON) {
+ msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF;
+ msm_uport->clk_req_off_state = CLK_REQ_OFF_START;
+ if (!use_low_power_rx_wakeup(msm_uport))
+ set_rfr_locked(uport, 0);
+ msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+ }
+}
+
+/**
+ * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart
+ * clock once pending TX is flushed and Rx DMA command is terminated.
+ * @uport: uart_port structure for the device instance.
+ *
+ * This functions puts the device into a partially active low power mode. It
+ * waits to complete all pending tx transactions, flushes ongoing Rx DMA
+ * command and terminates UART side Rx transaction, puts UART HW in non DMA
+ * mode and then clocks off the device. A client calls this when no UART
+ * data is expected. msm_request_clock_on() must be called before any further
+ * UART can be sent or received.
+ */
+void msm_hs_request_clock_off(struct uart_port *uport)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&uport->lock, flags);
+ msm_hs_request_clock_off_locked(uport);
+ spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+void msm_hs_request_clock_on_locked(struct uart_port *uport)
+{
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+ unsigned int data;
+
+ switch (msm_uport->clk_state) {
+ case MSM_HS_CLK_OFF:
+ clk_enable(msm_uport->clk);
+ disable_irq_nosync(msm_uport->rx_wakeup.irq);
+ /* fall-through */
+ case MSM_HS_CLK_REQUEST_OFF:
+ if (msm_uport->rx.flush == FLUSH_STOP ||
+ msm_uport->rx.flush == FLUSH_SHUTDOWN) {
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+ data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+ data |= UARTDM_RX_DM_EN_BMSK;
+ msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+ }
+ hrtimer_try_to_cancel(&msm_uport->clk_off_timer);
+ if (msm_uport->rx.flush == FLUSH_SHUTDOWN)
+ msm_hs_start_rx_locked(uport);
+ if (!use_low_power_rx_wakeup(msm_uport))
+ set_rfr_locked(uport, 1);
+ if (msm_uport->rx.flush == FLUSH_STOP)
+ msm_uport->rx.flush = FLUSH_IGNORE;
+ msm_uport->clk_state = MSM_HS_CLK_ON;
+ break;
+ case MSM_HS_CLK_ON:
+ break;
+ case MSM_HS_CLK_PORT_OFF:
+ break;
+ }
+}
+
+/**
+ * msm_hs_request_clock_on - Switch the device from partially active low
+ * power mode to fully active (i.e. clock on) mode.
+ * @uport: uart_port structure for the device.
+ *
+ * This function switches on the input clock, puts UART HW into DMA mode
+ * and enqueues an Rx DMA command if the device was in partially active
+ * mode. It has no effect if called with the device in inactive state.
+ */
+void msm_hs_request_clock_on(struct uart_port *uport)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&uport->lock, flags);
+ msm_hs_request_clock_on_locked(uport);
+ spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
+{
+ unsigned int wakeup = 0;
+ unsigned long flags;
+ struct msm_hs_port *msm_uport = dev;
+ struct uart_port *uport = &msm_uport->uport;
+ struct tty_struct *tty = NULL;
+
+ spin_lock_irqsave(&uport->lock, flags);
+ if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
+ /* ignore the first irq - it is a pending irq that occured
+ * before enable_irq() */
+ if (msm_uport->rx_wakeup.ignore)
+ msm_uport->rx_wakeup.ignore = 0;
+ else
+ wakeup = 1;
+ }
+
+ if (wakeup) {
+ /* the uart was clocked off during an rx, wake up and
+ * optionally inject char into tty rx */
+ msm_hs_request_clock_on_locked(uport);
+ if (msm_uport->rx_wakeup.inject_rx) {
+ tty = uport->state->port.tty;
+ tty_insert_flip_char(tty,
+ msm_uport->rx_wakeup.rx_to_inject,
+ TTY_NORMAL);
+ queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+ }
+ }
+
+ spin_unlock_irqrestore(&uport->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static const char *msm_hs_type(struct uart_port *port)
+{
+ return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL;
+}
+
+/* Called when port is opened */
+static int msm_hs_startup(struct uart_port *uport)
+{
+ int ret;
+ int rfr_level;
+ unsigned long flags;
+ unsigned int data;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+ struct circ_buf *tx_buf = &uport->state->xmit;
+ struct msm_hs_tx *tx = &msm_uport->tx;
+ struct msm_hs_rx *rx = &msm_uport->rx;
+
+ rfr_level = uport->fifosize;
+ if (rfr_level > 16)
+ rfr_level -= 16;
+
+ tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+
+ /* do not let tty layer execute RX in global workqueue, use a
+ * dedicated workqueue managed by this driver */
+ uport->state->port.tty->low_latency = 1;
+
+ /* turn on uart clk */
+ ret = msm_hs_init_clk_locked(uport);
+ if (unlikely(ret)) {
+ printk(KERN_ERR "Turning uartclk failed!\n");
+ goto err_msm_hs_init_clk;
+ }
+
+ /* Set auto RFR Level */
+ data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+ data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK;
+ data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK;
+ data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2));
+ data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level);
+ msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+ /* Make sure RXSTALE count is non-zero */
+ data = msm_hs_read(uport, UARTDM_IPR_ADDR);
+ if (!data) {
+ data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK;
+ msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+ }
+
+ /* Enable Data Mover Mode */
+ data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK;
+ msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+ /* Reset TX */
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+ msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW);
+ /* Turn on Uart Receiver */
+ msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK);
+
+ /* Turn on Uart Transmitter */
+ msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK);
+
+ /* Initialize the tx */
+ tx->tx_ready_int_en = 0;
+ tx->dma_in_flight = 0;
+
+ tx->xfer.complete_func = msm_hs_dmov_tx_callback;
+ tx->xfer.execute_func = NULL;
+
+ tx->command_ptr->cmd = CMD_LC |
+ CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX;
+
+ tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+ | (MSM_UARTDM_BURST_SIZE);
+
+ tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16);
+
+ tx->command_ptr->dst_row_addr =
+ msm_uport->uport.mapbase + UARTDM_TF_ADDR;
+
+
+ /* Turn on Uart Receive */
+ rx->xfer.complete_func = msm_hs_dmov_rx_callback;
+ rx->xfer.execute_func = NULL;
+
+ rx->command_ptr->cmd = CMD_LC |
+ CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX;
+
+ rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+ | (MSM_UARTDM_BURST_SIZE);
+ rx->command_ptr->row_offset = MSM_UARTDM_BURST_SIZE;
+ rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR;
+
+
+ msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK;
+ /* Enable reading the current CTS, no harm even if CTS is ignored */
+ msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK;
+
+ msm_hs_write(uport, UARTDM_TFWR_ADDR, 0); /* TXLEV on empty TX fifo */
+
+
+ ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH,
+ "msm_hs_uart", msm_uport);
+ if (unlikely(ret)) {
+ printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n");
+ goto err_request_irq;
+ }
+ if (use_low_power_rx_wakeup(msm_uport)) {
+ ret = request_irq(msm_uport->rx_wakeup.irq,
+ msm_hs_rx_wakeup_isr,
+ IRQF_TRIGGER_FALLING,
+ "msm_hs_rx_wakeup", msm_uport);
+ if (unlikely(ret)) {
+ printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n");
+ free_irq(uport->irq, msm_uport);
+ goto err_request_irq;
+ }
+ disable_irq(msm_uport->rx_wakeup.irq);
+ }
+
+ spin_lock_irqsave(&uport->lock, flags);
+
+ msm_hs_write(uport, UARTDM_RFWR_ADDR, 0);
+ msm_hs_start_rx_locked(uport);
+
+ spin_unlock_irqrestore(&uport->lock, flags);
+ ret = pm_runtime_set_active(uport->dev);
+ if (ret)
+ dev_err(uport->dev, "set active error:%d\n", ret);
+ pm_runtime_enable(uport->dev);
+
+ return 0;
+
+err_request_irq:
+err_msm_hs_init_clk:
+ dma_unmap_single(uport->dev, tx->dma_base,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ return ret;
+}
+
+/* Initialize tx and rx data structures */
+static int __devinit uartdm_init_port(struct uart_port *uport)
+{
+ int ret = 0;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+ struct msm_hs_tx *tx = &msm_uport->tx;
+ struct msm_hs_rx *rx = &msm_uport->rx;
+
+ /* Allocate the command pointer. Needs to be 64 bit aligned */
+ tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+ if (!tx->command_ptr)
+ return -ENOMEM;
+
+ tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+ if (!tx->command_ptr_ptr) {
+ ret = -ENOMEM;
+ goto err_tx_command_ptr_ptr;
+ }
+
+ tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr,
+ sizeof(dmov_box), DMA_TO_DEVICE);
+ tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev,
+ tx->command_ptr_ptr,
+ sizeof(u32 *), DMA_TO_DEVICE);
+ tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr);
+
+ init_waitqueue_head(&rx->wait);
+
+ rx->pool = dma_pool_create("rx_buffer_pool", uport->dev,
+ UARTDM_RX_BUF_SIZE, 16, 0);
+ if (!rx->pool) {
+ pr_err("%s(): cannot allocate rx_buffer_pool", __func__);
+ ret = -ENOMEM;
+ goto err_dma_pool_create;
+ }
+
+ rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer);
+ if (!rx->buffer) {
+ pr_err("%s(): cannot allocate rx->buffer", __func__);
+ ret = -ENOMEM;
+ goto err_dma_pool_alloc;
+ }
+
+ /* Allocate the command pointer. Needs to be 64 bit aligned */
+ rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+ if (!rx->command_ptr) {
+ pr_err("%s(): cannot allocate rx->command_ptr", __func__);
+ ret = -ENOMEM;
+ goto err_rx_command_ptr;
+ }
+
+ rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+ if (!rx->command_ptr_ptr) {
+ pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__);
+ ret = -ENOMEM;
+ goto err_rx_command_ptr_ptr;
+ }
+
+ rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) |
+ (UARTDM_RX_BUF_SIZE >> 4);
+
+ rx->command_ptr->dst_row_addr = rx->rbuffer;
+
+ rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr,
+ sizeof(dmov_box), DMA_TO_DEVICE);
+
+ *rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr);
+
+ rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr,
+ sizeof(u32 *), DMA_TO_DEVICE);
+ rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr);
+
+ INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work);
+
+ return ret;
+
+err_rx_command_ptr_ptr:
+ kfree(rx->command_ptr);
+err_rx_command_ptr:
+ dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+ msm_uport->rx.rbuffer);
+err_dma_pool_alloc:
+ dma_pool_destroy(msm_uport->rx.pool);
+err_dma_pool_create:
+ dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr,
+ sizeof(u32 *), DMA_TO_DEVICE);
+ dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr,
+ sizeof(dmov_box), DMA_TO_DEVICE);
+ kfree(msm_uport->tx.command_ptr_ptr);
+err_tx_command_ptr_ptr:
+ kfree(msm_uport->tx.command_ptr);
+ return ret;
+}
+
+static int __devinit msm_hs_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct uart_port *uport;
+ struct msm_hs_port *msm_uport;
+ struct resource *resource;
+ const struct msm_serial_hs_platform_data *pdata =
+ pdev->dev.platform_data;
+
+ if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+ printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ msm_uport = &q_uart_port[pdev->id];
+ uport = &msm_uport->uport;
+
+ uport->dev = &pdev->dev;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return -ENXIO;
+
+ uport->mapbase = resource->start;
+ uport->irq = platform_get_irq(pdev, 0);
+ if (unlikely(uport->irq < 0))
+ return -ENXIO;
+
+ if (unlikely(set_irq_wake(uport->irq, 1)))
+ return -ENXIO;
+
+ if (pdata == NULL || pdata->rx_wakeup_irq < 0)
+ msm_uport->rx_wakeup.irq = -1;
+ else {
+ msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq;
+ msm_uport->rx_wakeup.ignore = 1;
+ msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup;
+ msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject;
+
+ if (unlikely(msm_uport->rx_wakeup.irq < 0))
+ return -ENXIO;
+
+ if (unlikely(set_irq_wake(msm_uport->rx_wakeup.irq, 1)))
+ return -ENXIO;
+ }
+
+ if (pdata == NULL)
+ msm_uport->exit_lpm_cb = NULL;
+ else
+ msm_uport->exit_lpm_cb = pdata->exit_lpm_cb;
+
+ resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+ "uartdm_channels");
+ if (unlikely(!resource))
+ return -ENXIO;
+
+ msm_uport->dma_tx_channel = resource->start;
+ msm_uport->dma_rx_channel = resource->end;
+
+ resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+ "uartdm_crci");
+ if (unlikely(!resource))
+ return -ENXIO;
+
+ msm_uport->dma_tx_crci = resource->start;
+ msm_uport->dma_rx_crci = resource->end;
+
+ uport->iotype = UPIO_MEM;
+ uport->fifosize = UART_FIFOSIZE;
+ uport->ops = &msm_hs_ops;
+ uport->flags = UPF_BOOT_AUTOCONF;
+ uport->uartclk = UARTCLK;
+ msm_uport->imr_reg = 0x0;
+ msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk");
+ if (IS_ERR(msm_uport->clk))
+ return PTR_ERR(msm_uport->clk);
+
+ ret = uartdm_init_port(uport);
+ if (unlikely(ret))
+ return ret;
+
+ msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+ hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ msm_uport->clk_off_timer.function = msm_hs_clk_off_retry;
+ msm_uport->clk_off_delay = ktime_set(0, 1000000); /* 1ms */
+
+ uport->line = pdev->id;
+ return uart_add_one_port(&msm_hs_driver, uport);
+}
+
+static int __init msm_serial_hs_init(void)
+{
+ int ret, i;
+
+ /* Init all UARTS as non-configured */
+ for (i = 0; i < UARTDM_NR; i++)
+ q_uart_port[i].uport.type = PORT_UNKNOWN;
+
+ msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs");
+ if (unlikely(!msm_hs_workqueue))
+ return -ENOMEM;
+
+ ret = uart_register_driver(&msm_hs_driver);
+ if (unlikely(ret)) {
+ printk(KERN_ERR "%s failed to load\n", __func__);
+ goto err_uart_register_driver;
+ }
+
+ ret = platform_driver_register(&msm_serial_hs_platform_driver);
+ if (ret) {
+ printk(KERN_ERR "%s failed to load\n", __func__);
+ goto err_platform_driver_register;
+ }
+
+ return ret;
+
+err_platform_driver_register:
+ uart_unregister_driver(&msm_hs_driver);
+err_uart_register_driver:
+ destroy_workqueue(msm_hs_workqueue);
+ return ret;
+}
+module_init(msm_serial_hs_init);
+
+/*
+ * Called by the upper layer when port is closed.
+ * - Disables the port
+ * - Unhook the ISR
+ */
+static void msm_hs_shutdown(struct uart_port *uport)
+{
+ unsigned long flags;
+ struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+ BUG_ON(msm_uport->rx.flush < FLUSH_STOP);
+
+ spin_lock_irqsave(&uport->lock, flags);
+ clk_enable(msm_uport->clk);
+
+ /* Disable the transmitter */
+ msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK);
+ /* Disable the receiver */
+ msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK);
+
+ pm_runtime_disable(uport->dev);
+ pm_runtime_set_suspended(uport->dev);
+
+ /* Free the interrupt */
+ free_irq(uport->irq, msm_uport);
+ if (use_low_power_rx_wakeup(msm_uport))
+ free_irq(msm_uport->rx_wakeup.irq, msm_uport);
+
+ msm_uport->imr_reg = 0;
+ msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+ wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN);
+
+ clk_disable(msm_uport->clk); /* to balance local clk_enable() */
+ if (msm_uport->clk_state != MSM_HS_CLK_OFF)
+ clk_disable(msm_uport->clk); /* to balance clk_state */
+ msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+
+ dma_unmap_single(uport->dev, msm_uport->tx.dma_base,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+ spin_unlock_irqrestore(&uport->lock, flags);
+
+ if (cancel_work_sync(&msm_uport->rx.tty_work))
+ msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work);
+}
+
+static void __exit msm_serial_hs_exit(void)
+{
+ flush_workqueue(msm_hs_workqueue);
+ destroy_workqueue(msm_hs_workqueue);
+ platform_driver_unregister(&msm_serial_hs_platform_driver);
+ uart_unregister_driver(&msm_hs_driver);
+}
+module_exit(msm_serial_hs_exit);
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_hs_runtime_idle(struct device *dev)
+{
+ /*
+ * returning success from idle results in runtime suspend to be
+ * called
+ */
+ return 0;
+}
+
+static int msm_hs_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev, struct
+ platform_device, dev);
+ struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+ msm_hs_request_clock_on(&msm_uport->uport);
+ return 0;
+}
+
+static int msm_hs_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev, struct
+ platform_device, dev);
+ struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+ msm_hs_request_clock_off(&msm_uport->uport);
+ return 0;
+}
+#else
+#define msm_hs_runtime_idle NULL
+#define msm_hs_runtime_resume NULL
+#define msm_hs_runtime_suspend NULL
+#endif
+
+static const struct dev_pm_ops msm_hs_dev_pm_ops = {
+ .runtime_suspend = msm_hs_runtime_suspend,
+ .runtime_resume = msm_hs_runtime_resume,
+ .runtime_idle = msm_hs_runtime_idle,
+};
+
+static struct platform_driver msm_serial_hs_platform_driver = {
+ .probe = msm_hs_probe,
+ .remove = __devexit_p(msm_hs_remove),
+ .driver = {
+ .name = "msm_serial_hs",
+ .owner = THIS_MODULE,
+ .pm = &msm_hs_dev_pm_ops,
+ },
+};
+
+static struct uart_driver msm_hs_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "msm_serial_hs",
+ .dev_name = "ttyHS",
+ .nr = UARTDM_NR,
+ .cons = 0,
+};
+
+static struct uart_ops msm_hs_ops = {
+ .tx_empty = msm_hs_tx_empty,
+ .set_mctrl = msm_hs_set_mctrl_locked,
+ .get_mctrl = msm_hs_get_mctrl_locked,
+ .stop_tx = msm_hs_stop_tx_locked,
+ .start_tx = msm_hs_start_tx_locked,
+ .stop_rx = msm_hs_stop_rx_locked,
+ .enable_ms = msm_hs_enable_ms_locked,
+ .break_ctl = msm_hs_break_ctl,
+ .startup = msm_hs_startup,
+ .shutdown = msm_hs_shutdown,
+ .set_termios = msm_hs_set_termios,
+ .pm = msm_hs_pm,
+ .type = msm_hs_type,
+ .config_port = msm_hs_config_port,
+ .release_port = msm_hs_release_port,
+ .request_port = msm_hs_request_port,
+};
+
+MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset");
+MODULE_VERSION("1.2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
new file mode 100644
index 00000000000..beeff1e8609
--- /dev/null
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -0,0 +1,236 @@
+/* drivers/tty/serial/msm_smd_tty.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+
+#include <mach/msm_smd.h>
+
+#define MAX_SMD_TTYS 32
+
+struct smd_tty_info {
+ struct tty_port port;
+ smd_channel_t *ch;
+};
+
+struct smd_tty_channel_desc {
+ int id;
+ const char *name;
+};
+
+static struct smd_tty_info smd_tty[MAX_SMD_TTYS];
+
+static const struct smd_tty_channel_desc smd_default_tty_channels[] = {
+ { .id = 0, .name = "SMD_DS" },
+ { .id = 27, .name = "SMD_GPSNMEA" },
+};
+
+static const struct smd_tty_channel_desc *smd_tty_channels =
+ smd_default_tty_channels;
+static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels);
+
+static void smd_tty_notify(void *priv, unsigned event)
+{
+ unsigned char *ptr;
+ int avail;
+ struct smd_tty_info *info = priv;
+ struct tty_struct *tty;
+
+ if (event != SMD_EVENT_DATA)
+ return;
+
+ tty = tty_port_tty_get(&info->port);
+ if (!tty)
+ return;
+
+ for (;;) {
+ if (test_bit(TTY_THROTTLED, &tty->flags))
+ break;
+ avail = smd_read_avail(info->ch);
+ if (avail == 0)
+ break;
+
+ avail = tty_prepare_flip_string(tty, &ptr, avail);
+
+ if (smd_read(info->ch, ptr, avail) != avail) {
+ /* shouldn't be possible since we're in interrupt
+ ** context here and nobody else could 'steal' our
+ ** characters.
+ */
+ pr_err("OOPS - smd_tty_buffer mismatch?!");
+ }
+
+ tty_flip_buffer_push(tty);
+ }
+
+ /* XXX only when writable and necessary */
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+}
+
+static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+ int i, res = 0;
+ int n = tty->index;
+ const char *name = NULL;
+ struct smd_tty_info *info = smd_tty + n;
+
+ for (i = 0; i < smd_tty_channels_len; i++) {
+ if (smd_tty_channels[i].id == n) {
+ name = smd_tty_channels[i].name;
+ break;
+ }
+ }
+ if (!name)
+ return -ENODEV;
+
+ if (info->ch)
+ smd_kick(info->ch);
+ else
+ res = smd_open(name, &info->ch, info, smd_tty_notify);
+
+ if (!res)
+ tty->driver_data = info;
+
+ return res;
+}
+
+static void smd_tty_port_shutdown(struct tty_port *tport)
+{
+ struct smd_tty_info *info;
+ struct tty_struct *tty = tty_port_tty_get(tport);
+
+ info = tty->driver_data;
+ if (info->ch) {
+ smd_close(info->ch);
+ info->ch = 0;
+ }
+
+ tty->driver_data = 0;
+ tty_kref_put(tty);
+}
+
+static int smd_tty_open(struct tty_struct *tty, struct file *f)
+{
+ struct smd_tty_info *info = smd_tty + tty->index;
+
+ return tty_port_open(&info->port, tty, f);
+}
+
+static void smd_tty_close(struct tty_struct *tty, struct file *f)
+{
+ struct smd_tty_info *info = tty->driver_data;
+
+ tty_port_close(&info->port, tty, f);
+}
+
+static int smd_tty_write(struct tty_struct *tty,
+ const unsigned char *buf, int len)
+{
+ struct smd_tty_info *info = tty->driver_data;
+ int avail;
+
+ /* if we're writing to a packet channel we will
+ ** never be able to write more data than there
+ ** is currently space for
+ */
+ avail = smd_write_avail(info->ch);
+ if (len > avail)
+ len = avail;
+
+ return smd_write(info->ch, buf, len);
+}
+
+static int smd_tty_write_room(struct tty_struct *tty)
+{
+ struct smd_tty_info *info = tty->driver_data;
+ return smd_write_avail(info->ch);
+}
+
+static int smd_tty_chars_in_buffer(struct tty_struct *tty)
+{
+ struct smd_tty_info *info = tty->driver_data;
+ return smd_read_avail(info->ch);
+}
+
+static void smd_tty_unthrottle(struct tty_struct *tty)
+{
+ struct smd_tty_info *info = tty->driver_data;
+ smd_kick(info->ch);
+}
+
+static const struct tty_port_operations smd_tty_port_ops = {
+ .shutdown = smd_tty_port_shutdown,
+ .activate = smd_tty_port_activate,
+};
+
+static const struct tty_operations smd_tty_ops = {
+ .open = smd_tty_open,
+ .close = smd_tty_close,
+ .write = smd_tty_write,
+ .write_room = smd_tty_write_room,
+ .chars_in_buffer = smd_tty_chars_in_buffer,
+ .unthrottle = smd_tty_unthrottle,
+};
+
+static struct tty_driver *smd_tty_driver;
+
+static int __init smd_tty_init(void)
+{
+ int ret, i;
+
+ smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
+ if (smd_tty_driver == 0)
+ return -ENOMEM;
+
+ smd_tty_driver->owner = THIS_MODULE;
+ smd_tty_driver->driver_name = "smd_tty_driver";
+ smd_tty_driver->name = "smd";
+ smd_tty_driver->major = 0;
+ smd_tty_driver->minor_start = 0;
+ smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ smd_tty_driver->init_termios = tty_std_termios;
+ smd_tty_driver->init_termios.c_iflag = 0;
+ smd_tty_driver->init_termios.c_oflag = 0;
+ smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+ smd_tty_driver->init_termios.c_lflag = 0;
+ smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(smd_tty_driver, &smd_tty_ops);
+
+ ret = tty_register_driver(smd_tty_driver);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < smd_tty_channels_len; i++) {
+ tty_port_init(&smd_tty[smd_tty_channels[i].id].port);
+ smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops;
+ tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0);
+ }
+
+ return 0;
+}
+
+module_init(smd_tty_init);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 5c7abe4c94d..6a18ca6ddaa 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -160,17 +160,17 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
* A few common types, add more as needed.
*/
static struct of_device_id __devinitdata of_platform_serial_table[] = {
- { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, },
- { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
- { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
- { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
- { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
- { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, },
+ { .compatible = "ns8250", .data = (void *)PORT_8250, },
+ { .compatible = "ns16450", .data = (void *)PORT_16450, },
+ { .compatible = "ns16550a", .data = (void *)PORT_16550A, },
+ { .compatible = "ns16550", .data = (void *)PORT_16550, },
+ { .compatible = "ns16750", .data = (void *)PORT_16750, },
+ { .compatible = "ns16850", .data = (void *)PORT_16850, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
- { .type = "serial", .compatible = "ibm,qpace-nwp-serial",
- .data = (void *)PORT_NWPSERIAL, },
+ { .compatible = "ibm,qpace-nwp-serial",
+ .data = (void *)PORT_NWPSERIAL, },
#endif
- { .type = "serial", .data = (void *)PORT_UNKNOWN, },
+ { .type = "serial", .data = (void *)PORT_UNKNOWN, },
{ /* end of list */ },
};
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7f2f0105878..763537943a5 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -20,6 +20,10 @@
* this driver as required for the omap-platform.
*/
+#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
@@ -190,7 +194,6 @@ static inline void receive_chars(struct uart_omap_port *up, int *status)
if (up->port.line == up->port.cons->index) {
/* Recover the break flag from console xmit */
lsr |= up->lsr_break_flag;
- up->lsr_break_flag = 0;
}
#endif
if (lsr & UART_LSR_BI)
@@ -517,6 +520,9 @@ static int serial_omap_startup(struct uart_port *port)
up->ier = UART_IER_RLSI | UART_IER_RDI;
serial_out(up, UART_IER, up->ier);
+ /* Enable module level wake up */
+ serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
+
up->port_activity = jiffies;
return 0;
}
@@ -824,9 +830,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
- /* Enable module level wake up */
- serial_out(up, UART_OMAP_WER,
- (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0);
}
static void serial_omap_release_port(struct uart_port *port)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 70a61458ec4..a9ad7f33526 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -21,6 +21,7 @@
#include <linux/serial_core.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/dmi.h>
#include <linux/dmaengine.h>
#include <linux/pch_dma.h>
@@ -40,10 +41,11 @@ enum {
#define PCH_UART_DRIVER_DEVICE "ttyPCH"
-#define PCH_UART_NR_GE_256FIFO 1
-#define PCH_UART_NR_GE_64FIFO 3
-#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO)
-#define PCH_UART_NR PCH_UART_NR_GE
+/* Set the max number of UART port
+ * Intel EG20T PCH: 4 port
+ * OKI SEMICONDUCTOR ML7213 IOH: 3 port
+*/
+#define PCH_UART_NR 4
#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
@@ -192,6 +194,8 @@ enum {
#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
+#define PCI_VENDOR_ID_ROHM 0x10DB
+
struct pch_uart_buffer {
unsigned char *buf;
int size;
@@ -215,6 +219,7 @@ struct eg20t_port {
struct pch_uart_buffer rxbuf;
unsigned int dmsr;
unsigned int fcr;
+ unsigned int mcr;
unsigned int use_dma;
unsigned int use_dma_flag;
struct dma_async_tx_descriptor *desc_tx;
@@ -223,13 +228,44 @@ struct eg20t_port {
struct pch_dma_slave param_rx;
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
- struct scatterlist sg_tx;
+ struct scatterlist *sg_tx_p;
+ int nent;
struct scatterlist sg_rx;
int tx_dma_use;
void *rx_buf_virt;
dma_addr_t rx_buf_dma;
};
+/**
+ * struct pch_uart_driver_data - private data structure for UART-DMA
+ * @port_type: The number of DMA channel
+ * @line_no: UART port line number (0, 1, 2...)
+ */
+struct pch_uart_driver_data {
+ int port_type;
+ int line_no;
+};
+
+enum pch_uart_num_t {
+ pch_et20t_uart0 = 0,
+ pch_et20t_uart1,
+ pch_et20t_uart2,
+ pch_et20t_uart3,
+ pch_ml7213_uart0,
+ pch_ml7213_uart1,
+ pch_ml7213_uart2,
+};
+
+static struct pch_uart_driver_data drv_dat[] = {
+ [pch_et20t_uart0] = {PCH_UART_8LINE, 0},
+ [pch_et20t_uart1] = {PCH_UART_2LINE, 1},
+ [pch_et20t_uart2] = {PCH_UART_2LINE, 2},
+ [pch_et20t_uart3] = {PCH_UART_2LINE, 3},
+ [pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
+ [pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
+ [pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
+};
+
static unsigned int default_baud = 9600;
static const int trigger_level_256[4] = { 1, 64, 128, 224 };
static const int trigger_level_64[4] = { 1, 16, 32, 56 };
@@ -278,7 +314,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
div = DIV_ROUND(priv->base_baud / 16, baud);
if (div < 0 || USHRT_MAX <= div) {
- pr_err("Invalid Baud(div=0x%x)\n", div);
+ dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
return -EINVAL;
}
@@ -286,17 +322,17 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
dlm = ((unsigned int)div >> 8) & 0x00FFU;
if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
- pr_err("Invalid parity(0x%x)\n", parity);
+ dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
return -EINVAL;
}
if (bits & ~PCH_UART_LCR_WLS) {
- pr_err("Invalid bits(0x%x)\n", bits);
+ dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
return -EINVAL;
}
if (stb & ~PCH_UART_LCR_STB) {
- pr_err("Invalid STB(0x%x)\n", stb);
+ dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
return -EINVAL;
}
@@ -304,7 +340,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
lcr |= bits;
lcr |= stb;
- pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
+ dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
__func__, baud, div, lcr, jiffies);
iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
iowrite8(dll, priv->membase + PCH_UART_DLL);
@@ -318,7 +354,8 @@ static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
unsigned int flag)
{
if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
- pr_err("%s:Invalid flag(0x%x)\n", __func__, flag);
+ dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
+ __func__, flag);
return -EINVAL;
}
@@ -337,17 +374,20 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
u8 fcr;
if (dmamode & ~PCH_UART_FCR_DMS) {
- pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode);
+ dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
+ __func__, dmamode);
return -EINVAL;
}
if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
- pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size);
+ dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
+ __func__, fifo_size);
return -EINVAL;
}
if (trigger & ~PCH_UART_FCR_RFTL) {
- pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger);
+ dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
+ __func__, trigger);
return -EINVAL;
}
@@ -386,7 +426,7 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
return get_msr(priv, priv->membase);
}
-static int pch_uart_hal_write(struct eg20t_port *priv,
+static void pch_uart_hal_write(struct eg20t_port *priv,
const unsigned char *buf, int tx_size)
{
int i;
@@ -396,7 +436,6 @@ static int pch_uart_hal_write(struct eg20t_port *priv,
thr = buf[i++];
iowrite8(thr, priv->membase + PCH_UART_THR);
}
- return i;
}
static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
@@ -452,7 +491,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
port = &priv->port;
tty = tty_port_tty_get(&port->state->port);
if (!tty) {
- pr_debug("%s:tty is busy now", __func__);
+ dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
return -EBUSY;
}
@@ -469,8 +508,8 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
struct uart_port *port = &priv->port;
if (port->x_char) {
- pr_debug("%s:X character send %02x (%lu)\n", __func__,
- port->x_char, jiffies);
+ dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
+ __func__, port->x_char, jiffies);
buf[0] = port->x_char;
port->x_char = 0;
ret = 1;
@@ -490,7 +529,7 @@ static int dma_push_rx(struct eg20t_port *priv, int size)
port = &priv->port;
tty = tty_port_tty_get(&port->state->port);
if (!tty) {
- pr_debug("%s:tty is busy now", __func__);
+ dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
return 0;
}
@@ -560,11 +599,13 @@ static void pch_request_dma(struct uart_port *port)
/* Set Tx DMA */
param = &priv->param_tx;
param->dma_dev = &dma_dev->dev;
- param->chan_id = priv->port.line;
+ param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
+
param->tx_reg = port->mapbase + UART_TX;
chan = dma_request_channel(mask, filter, param);
if (!chan) {
- pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__);
+ dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
+ __func__);
return;
}
priv->chan_tx = chan;
@@ -572,11 +613,13 @@ static void pch_request_dma(struct uart_port *port)
/* Set Rx DMA */
param = &priv->param_rx;
param->dma_dev = &dma_dev->dev;
- param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */
+ param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
+
param->rx_reg = port->mapbase + UART_RX;
chan = dma_request_channel(mask, filter, param);
if (!chan) {
- pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__);
+ dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
+ __func__);
dma_release_channel(priv->chan_tx);
return;
}
@@ -592,16 +635,20 @@ static void pch_dma_rx_complete(void *arg)
struct eg20t_port *priv = arg;
struct uart_port *port = &priv->port;
struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+ int count;
if (!tty) {
- pr_debug("%s:tty is busy now", __func__);
+ dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
return;
}
- if (dma_push_rx(priv, priv->trigger_level))
+ dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
+ count = dma_push_rx(priv, priv->trigger_level);
+ if (count)
tty_flip_buffer_push(tty);
-
tty_kref_put(tty);
+ async_tx_ack(priv->desc_rx);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
}
static void pch_dma_tx_complete(void *arg)
@@ -609,16 +656,23 @@ static void pch_dma_tx_complete(void *arg)
struct eg20t_port *priv = arg;
struct uart_port *port = &priv->port;
struct circ_buf *xmit = &port->state->xmit;
+ struct scatterlist *sg = priv->sg_tx_p;
+ int i;
- xmit->tail += sg_dma_len(&priv->sg_tx);
+ for (i = 0; i < priv->nent; i++, sg++) {
+ xmit->tail += sg_dma_len(sg);
+ port->icount.tx += sg_dma_len(sg);
+ }
xmit->tail &= UART_XMIT_SIZE - 1;
- port->icount.tx += sg_dma_len(&priv->sg_tx);
-
async_tx_ack(priv->desc_tx);
+ dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
priv->tx_dma_use = 0;
+ priv->nent = 0;
+ kfree(priv->sg_tx_p);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
}
-static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
+static int pop_tx(struct eg20t_port *priv, int size)
{
int count = 0;
struct uart_port *port = &priv->port;
@@ -631,13 +685,13 @@ static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
int cnt_to_end =
CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
int sz = min(size - count, cnt_to_end);
- memcpy(&buf[count], &xmit->buf[xmit->tail], sz);
+ pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
count += sz;
} while (!uart_circ_empty(xmit) && count < size);
pop_tx_end:
- pr_debug("%d characters. Remained %d characters. (%lu)\n",
+ dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
count, size - count, jiffies);
return count;
@@ -679,7 +733,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
- sg_dma_len(sg) = priv->fifo_size;
+ sg_dma_len(sg) = priv->trigger_level;
sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
@@ -689,7 +743,8 @@ static int dma_handle_rx(struct eg20t_port *priv)
desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
sg, 1, DMA_FROM_DEVICE,
- DMA_PREP_INTERRUPT);
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
if (!desc)
return 0;
@@ -706,14 +761,14 @@ static unsigned int handle_tx(struct eg20t_port *priv)
{
struct uart_port *port = &priv->port;
struct circ_buf *xmit = &port->state->xmit;
- int ret;
int fifo_size;
int tx_size;
int size;
int tx_empty;
if (!priv->start_tx) {
- pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+ dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+ __func__, jiffies);
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
priv->tx_empty = 1;
return 0;
@@ -728,17 +783,21 @@ static unsigned int handle_tx(struct eg20t_port *priv)
fifo_size--;
}
size = min(xmit->head - xmit->tail, fifo_size);
- tx_size = pop_tx(priv, xmit->buf, size);
+ if (size < 0)
+ size = fifo_size;
+
+ tx_size = pop_tx(priv, size);
if (tx_size > 0) {
- ret = pch_uart_hal_write(priv, xmit->buf, tx_size);
- port->icount.tx += ret;
+ port->icount.tx += tx_size;
tx_empty = 0;
}
priv->tx_empty = tx_empty;
- if (tx_empty)
+ if (tx_empty) {
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+ uart_write_wakeup(port);
+ }
return PCH_UART_HANDLED_TX_INT;
}
@@ -747,14 +806,28 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
{
struct uart_port *port = &priv->port;
struct circ_buf *xmit = &port->state->xmit;
- struct scatterlist *sg = &priv->sg_tx;
+ struct scatterlist *sg;
int nent;
int fifo_size;
int tx_empty;
struct dma_async_tx_descriptor *desc;
+ int num;
+ int i;
+ int bytes;
+ int size;
+ int rem;
if (!priv->start_tx) {
- pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+ dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+ __func__, jiffies);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+ priv->tx_empty = 1;
+ return 0;
+ }
+
+ if (priv->tx_dma_use) {
+ dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
+ __func__, jiffies);
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
priv->tx_empty = 1;
return 0;
@@ -769,37 +842,73 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
fifo_size--;
}
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+ bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
+ UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
+ xmit->tail, UART_XMIT_SIZE));
+ if (!bytes) {
+ dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+ uart_write_wakeup(port);
+ return 0;
+ }
+
+ if (bytes > fifo_size) {
+ num = bytes / fifo_size + 1;
+ size = fifo_size;
+ rem = bytes % fifo_size;
+ } else {
+ num = 1;
+ size = bytes;
+ rem = bytes;
+ }
+
+ dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
+ __func__, num, size, rem);
priv->tx_dma_use = 1;
- sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */
+ priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
- sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf),
- UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK);
+ sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
+ sg = priv->sg_tx_p;
- nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE);
+ for (i = 0; i < num; i++, sg++) {
+ if (i == (num - 1))
+ sg_set_page(sg, virt_to_page(xmit->buf),
+ rem, fifo_size * i);
+ else
+ sg_set_page(sg, virt_to_page(xmit->buf),
+ size, fifo_size * i);
+ }
+
+ sg = priv->sg_tx_p;
+ nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
if (!nent) {
- pr_err("%s:dma_map_sg Failed\n", __func__);
+ dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
return 0;
}
-
- sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
- sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
- sg->offset;
- sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail,
- UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
- xmit->tail, UART_XMIT_SIZE));
+ priv->nent = nent;
+
+ for (i = 0; i < nent; i++, sg++) {
+ sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
+ fifo_size * i;
+ sg_dma_address(sg) = (sg_dma_address(sg) &
+ ~(UART_XMIT_SIZE - 1)) + sg->offset;
+ if (i == (nent - 1))
+ sg_dma_len(sg) = rem;
+ else
+ sg_dma_len(sg) = size;
+ }
desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
- sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ priv->sg_tx_p, nent, DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
- pr_err("%s:device_prep_slave_sg Failed\n", __func__);
+ dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n",
+ __func__);
return 0;
}
-
- dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
-
+ dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
priv->desc_tx = desc;
desc->callback = pch_dma_tx_complete;
desc->callback_param = priv;
@@ -854,10 +963,16 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
}
break;
case PCH_UART_IID_RDR: /* Received Data Ready */
- if (priv->use_dma)
+ if (priv->use_dma) {
+ pch_uart_hal_disable_interrupt(priv,
+ PCH_UART_HAL_RX_INT);
ret = dma_handle_rx(priv);
- else
+ if (!ret)
+ pch_uart_hal_enable_interrupt(priv,
+ PCH_UART_HAL_RX_INT);
+ } else {
ret = handle_rx(priv);
+ }
break;
case PCH_UART_IID_RDR_TO: /* Received Data Ready
(FIFO Timeout) */
@@ -874,7 +989,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
ret = PCH_UART_HANDLED_MS_INT;
break;
default: /* Never junp to this label */
- pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies);
+ dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
+ iid, jiffies);
ret = -1;
break;
}
@@ -932,7 +1048,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port)
static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
u32 mcr = 0;
- unsigned int dat;
struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
if (mctrl & TIOCM_DTR)
@@ -942,11 +1057,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_LOOP)
mcr |= UART_MCR_LOOP;
- if (mctrl) {
- dat = pch_uart_get_mctrl(port);
- dat |= mcr;
- iowrite8(dat, priv->membase + UART_MCR);
- }
+ if (priv->mcr & UART_MCR_AFE)
+ mcr |= UART_MCR_AFE;
+
+ if (mctrl)
+ iowrite8(mcr, priv->membase + UART_MCR);
}
static void pch_uart_stop_tx(struct uart_port *port)
@@ -963,9 +1078,13 @@ static void pch_uart_start_tx(struct uart_port *port)
priv = container_of(port, struct eg20t_port, port);
- if (priv->use_dma)
- if (priv->tx_dma_use)
+ if (priv->use_dma) {
+ if (priv->tx_dma_use) {
+ dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
+ __func__);
return;
+ }
+ }
priv->start_tx = 1;
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
@@ -1010,7 +1129,12 @@ static int pch_uart_startup(struct uart_port *port)
priv = container_of(port, struct eg20t_port, port);
priv->tx_empty = 1;
- port->uartclk = priv->base_baud;
+
+ if (port->uartclk)
+ priv->base_baud = port->uartclk;
+ else
+ port->uartclk = priv->base_baud;
+
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
ret = pch_uart_hal_set_line(priv, default_baud,
PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
@@ -1081,7 +1205,8 @@ static void pch_uart_shutdown(struct uart_port *port)
ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
if (ret)
- pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
+ dev_err(priv->port.dev,
+ "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
if (priv->use_dma_flag)
pch_free_dma(port);
@@ -1130,6 +1255,13 @@ static void pch_uart_set_termios(struct uart_port *port,
} else {
parity = PCH_UART_HAL_PARITY_NONE;
}
+
+ /* Only UART0 has auto hardware flow function */
+ if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
+ priv->mcr |= UART_MCR_AFE;
+ else
+ priv->mcr &= ~UART_MCR_AFE;
+
termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
@@ -1202,17 +1334,19 @@ static int pch_uart_verify_port(struct uart_port *port,
priv = container_of(port, struct eg20t_port, port);
if (serinfo->flags & UPF_LOW_LATENCY) {
- pr_info("PCH UART : Use PIO Mode (without DMA)\n");
+ dev_info(priv->port.dev,
+ "PCH UART : Use PIO Mode (without DMA)\n");
priv->use_dma = 0;
serinfo->flags &= ~UPF_LOW_LATENCY;
} else {
#ifndef CONFIG_PCH_DMA
- pr_err("%s : PCH DMA is not Loaded.\n", __func__);
+ dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
+ __func__);
return -EOPNOTSUPP;
#endif
priv->use_dma = 1;
priv->use_dma_flag = 1;
- pr_info("PCH UART : Use DMA Mode\n");
+ dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
}
return 0;
@@ -1249,7 +1383,7 @@ static struct uart_driver pch_uart_driver = {
};
static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
- int port_type)
+ const struct pci_device_id *id)
{
struct eg20t_port *priv;
int ret;
@@ -1257,7 +1391,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
unsigned int mapbase;
unsigned char *rxbuf;
int fifosize, base_baud;
- static int num;
+ int port_type;
+ struct pch_uart_driver_data *board;
+
+ board = &drv_dat[id->driver_data];
+ port_type = board->port_type;
priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
if (priv == NULL)
@@ -1267,14 +1405,18 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
if (!rxbuf)
goto init_port_free_txbuf;
+ base_baud = 1843200; /* 1.8432MHz */
+
+ /* quirk for CM-iTC board */
+ if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+ base_baud = 192000000; /* 192.0MHz */
+
switch (port_type) {
case PORT_UNKNOWN:
- fifosize = 256; /* UART0 */
- base_baud = 1843200; /* 1.8432MHz */
+ fifosize = 256; /* EG20T/ML7213: UART0 */
break;
case PORT_8250:
- fifosize = 64; /* UART1~3 */
- base_baud = 1843200; /* 1.8432MHz */
+ fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
break;
default:
dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
@@ -1302,11 +1444,14 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
priv->port.ops = &pch_uart_ops;
priv->port.flags = UPF_BOOT_AUTOCONF;
priv->port.fifosize = fifosize;
- priv->port.line = num++;
+ priv->port.line = board->line_no;
priv->trigger = PCH_UART_HAL_TRIGGER_M;
+ spin_lock_init(&priv->port.lock);
+
pci_set_drvdata(pdev, priv);
pch_uart_hal_request(pdev, fifosize, base_baud);
+
ret = uart_add_one_port(&pch_uart_driver, &priv->port);
if (ret < 0)
goto init_port_hal_free;
@@ -1377,13 +1522,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev)
static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
- .driver_data = PCH_UART_8LINE},
+ .driver_data = pch_et20t_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_et20t_uart1},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_et20t_uart2},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_et20t_uart3},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
+ .driver_data = pch_ml7213_uart0},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
+ .driver_data = pch_ml7213_uart1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
+ .driver_data = pch_ml7213_uart2},
{0,},
};
@@ -1397,7 +1548,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
if (ret < 0)
goto probe_error;
- priv = pch_uart_init_port(pdev, id->driver_data);
+ priv = pch_uart_init_port(pdev, id);
if (!priv) {
ret = -EBUSY;
goto probe_disable_device;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 460a72d91bb..733fe8e73f0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -905,7 +905,7 @@ static int uart_get_lsr_info(struct tty_struct *tty,
return put_user(result, value);
}
-static int uart_tiocmget(struct tty_struct *tty, struct file *file)
+static int uart_tiocmget(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct tty_port *port = &state->port;
@@ -913,10 +913,8 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
int result = -EIO;
mutex_lock(&port->mutex);
- if ((!file || !tty_hung_up_p(file)) &&
- !(tty->flags & (1 << TTY_IO_ERROR))) {
+ if (!(tty->flags & (1 << TTY_IO_ERROR))) {
result = uport->mctrl;
-
spin_lock_irq(&uport->lock);
result |= uport->ops->get_mctrl(uport);
spin_unlock_irq(&uport->lock);
@@ -927,8 +925,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
}
static int
-uart_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
{
struct uart_state *state = tty->driver_data;
struct uart_port *uport = state->uart_port;
@@ -936,8 +933,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
int ret = -EIO;
mutex_lock(&port->mutex);
- if ((!file || !tty_hung_up_p(file)) &&
- !(tty->flags & (1 << TTY_IO_ERROR))) {
+ if (!(tty->flags & (1 << TTY_IO_ERROR))) {
uart_update_mctrl(uport, set, clear);
ret = 0;
}
@@ -1103,7 +1099,7 @@ static int uart_get_icount(struct tty_struct *tty,
* Called via sys_ioctl. We can use spin_lock_irq() here.
*/
static int
-uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
+uart_ioctl(struct tty_struct *tty, unsigned int cmd,
unsigned long arg)
{
struct uart_state *state = tty->driver_data;
@@ -1156,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
mutex_lock(&port->mutex);
- if (tty_hung_up_p(filp)) {
+ if (tty->flags & (1 << TTY_IO_ERROR)) {
ret = -EIO;
goto out_up;
}
@@ -2064,7 +2060,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
/*
* Re-enable the console device after suspending.
*/
- if (console_suspend_enabled && uart_console(uport)) {
+ if (uart_console(uport)) {
/*
* First try to use the console cflag setting.
*/
@@ -2077,9 +2073,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
if (port->tty && port->tty->termios && termios.c_cflag == 0)
termios = *(port->tty->termios);
- uart_change_pm(state, 0);
uport->ops->set_termios(uport, &termios, NULL);
- console_start(uport->cons);
+ if (console_suspend_enabled)
+ console_start(uport->cons);
}
if (port->flags & ASYNC_SUSPENDED) {
diff --git a/drivers/char/synclink.c b/drivers/tty/synclink.c
index 3a6824f12be..18888d005a0 100644
--- a/drivers/char/synclink.c
+++ b/drivers/tty/synclink.c
@@ -823,8 +823,8 @@ static isr_dispatch_func UscIsrTable[7] =
/*
* ioctl call handlers
*/
-static int tiocmget(struct tty_struct *tty, struct file *file);
-static int tiocmset(struct tty_struct *tty, struct file *file,
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
__user *user_icount);
@@ -2846,7 +2846,7 @@ static int modem_input_wait(struct mgsl_struct *info,int arg)
/* return the state of the serial control and status signals
*/
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned int result;
@@ -2871,8 +2871,8 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
/* set modem control signals (DTR/RTS)
*/
-static int tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
@@ -2962,13 +2962,12 @@ static int msgl_get_icount(struct tty_struct *tty,
* Arguments:
*
* tty pointer to tty instance data
- * file pointer to associated file object for device
* cmd IOCTL command code
* arg command argument/context
*
* Return Value: 0 if success, otherwise error code
*/
-static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
+static int mgsl_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct mgsl_struct * info = tty->driver_data;
diff --git a/drivers/char/synclink_gt.c b/drivers/tty/synclink_gt.c
index d01fffeac95..a35dd549a00 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -154,7 +154,7 @@ static void flush_buffer(struct tty_struct *tty);
static void tx_hold(struct tty_struct *tty);
static void tx_release(struct tty_struct *tty);
-static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
static int chars_in_buffer(struct tty_struct *tty);
static void throttle(struct tty_struct * tty);
static void unthrottle(struct tty_struct * tty);
@@ -512,9 +512,9 @@ static int tx_abort(struct slgt_info *info);
static int rx_enable(struct slgt_info *info, int enable);
static int modem_input_wait(struct slgt_info *info,int arg);
static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
-static int tiocmget(struct tty_struct *tty, struct file *file);
-static int tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear);
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
static int set_break(struct tty_struct *tty, int break_state);
static int get_interface(struct slgt_info *info, int __user *if_mode);
static int set_interface(struct slgt_info *info, int if_mode);
@@ -1030,13 +1030,12 @@ static void tx_release(struct tty_struct *tty)
* Arguments
*
* tty pointer to tty instance data
- * file pointer to associated file object for device
* cmd IOCTL command code
* arg command argument/context
*
* Return 0 if success, otherwise error code
*/
-static int ioctl(struct tty_struct *tty, struct file *file,
+static int ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct slgt_info *info = tty->driver_data;
@@ -1200,7 +1199,7 @@ static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *ne
return 0;
}
-static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
+static long slgt_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct slgt_info *info = tty->driver_data;
@@ -1239,7 +1238,7 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
case MGSL_IOCSIF:
case MGSL_IOCSXSYNC:
case MGSL_IOCSXCTRL:
- rc = ioctl(tty, file, cmd, arg);
+ rc = ioctl(tty, cmd, arg);
break;
}
@@ -3195,7 +3194,7 @@ static int modem_input_wait(struct slgt_info *info,int arg)
/*
* return state of serial control and status signals
*/
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
{
struct slgt_info *info = tty->driver_data;
unsigned int result;
@@ -3223,7 +3222,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
* TIOCMSET = set/clear signal values
* value bit mask for command
*/
-static int tiocmset(struct tty_struct *tty, struct file *file,
+static int tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct slgt_info *info = tty->driver_data;
diff --git a/drivers/char/synclinkmp.c b/drivers/tty/synclinkmp.c
index 2f9eb4b0dec..32734369447 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -520,7 +520,7 @@ static void flush_buffer(struct tty_struct *tty);
static void tx_hold(struct tty_struct *tty);
static void tx_release(struct tty_struct *tty);
-static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
static int chars_in_buffer(struct tty_struct *tty);
static void throttle(struct tty_struct * tty);
static void unthrottle(struct tty_struct * tty);
@@ -546,9 +546,9 @@ static int tx_abort(SLMP_INFO *info);
static int rx_enable(SLMP_INFO *info, int enable);
static int modem_input_wait(SLMP_INFO *info,int arg);
static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
-static int tiocmget(struct tty_struct *tty, struct file *file);
-static int tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear);
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
static int set_break(struct tty_struct *tty, int break_state);
static void add_device(SLMP_INFO *info);
@@ -1248,13 +1248,12 @@ static void tx_release(struct tty_struct *tty)
* Arguments:
*
* tty pointer to tty instance data
- * file pointer to associated file object for device
* cmd IOCTL command code
* arg command argument/context
*
* Return Value: 0 if success, otherwise error code
*/
-static int ioctl(struct tty_struct *tty, struct file *file,
+static int ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
SLMP_INFO *info = tty->driver_data;
@@ -3207,7 +3206,7 @@ static int modem_input_wait(SLMP_INFO *info,int arg)
/* return the state of the serial control and status signals
*/
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
{
SLMP_INFO *info = tty->driver_data;
unsigned int result;
@@ -3232,8 +3231,8 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
/* set modem control signals (DTR/RTS)
*/
-static int tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
SLMP_INFO *info = tty->driver_data;
unsigned long flags;
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index f64582b0f62..7c586692062 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -95,8 +95,10 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid,
{
if (buf->valid == 0)
return;
- if (audit_enabled == 0)
+ if (audit_enabled == 0) {
+ buf->valid = 0;
return;
+ }
tty_audit_log("tty", tsk, loginuid, sessionid, buf->major, buf->minor,
buf->data, buf->valid);
buf->valid = 0;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 0065da4b11c..8ef2d69470e 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2465,12 +2465,12 @@ out:
* Locking: none (up to the driver)
*/
-static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
+static int tty_tiocmget(struct tty_struct *tty, int __user *p)
{
int retval = -EINVAL;
if (tty->ops->tiocmget) {
- retval = tty->ops->tiocmget(tty, file);
+ retval = tty->ops->tiocmget(tty);
if (retval >= 0)
retval = put_user(retval, p);
@@ -2481,7 +2481,6 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
/**
* tty_tiocmset - set modem status
* @tty: tty device
- * @file: user file pointer
* @cmd: command - clear bits, set bits or set all
* @p: pointer to desired bits
*
@@ -2491,7 +2490,7 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
* Locking: none (up to the driver)
*/
-static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
+static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
unsigned __user *p)
{
int retval;
@@ -2518,7 +2517,7 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
}
set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
- return tty->ops->tiocmset(tty, file, set, clear);
+ return tty->ops->tiocmset(tty, set, clear);
}
static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
@@ -2627,6 +2626,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return put_user(tty->ldisc->ops->num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
+ case TIOCVHANGUP:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ tty_vhangup(tty);
+ return 0;
case TIOCGDEV:
{
unsigned int ret = new_encode_dev(tty_devnum(real_tty));
@@ -2655,11 +2659,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return send_break(tty, arg ? arg*100 : 250);
case TIOCMGET:
- return tty_tiocmget(tty, file, p);
+ return tty_tiocmget(tty, p);
case TIOCMSET:
case TIOCMBIC:
case TIOCMBIS:
- return tty_tiocmset(tty, file, cmd, p);
+ return tty_tiocmset(tty, cmd, p);
case TIOCGICOUNT:
retval = tty_tiocgicount(tty, p);
/* For the moment allow fall through to the old method */
@@ -2677,7 +2681,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
break;
}
if (tty->ops->ioctl) {
- retval = (tty->ops->ioctl)(tty, file, cmd, arg);
+ retval = (tty->ops->ioctl)(tty, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
@@ -2705,7 +2709,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
return -EINVAL;
if (tty->ops->compat_ioctl) {
- retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg);
+ retval = (tty->ops->compat_ioctl)(tty, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 0c188997145..1a1135d580a 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -486,7 +486,7 @@ int tty_termios_hw_change(struct ktermios *a, struct ktermios *b)
EXPORT_SYMBOL(tty_termios_hw_change);
/**
- * change_termios - update termios values
+ * tty_set_termios - update termios values
* @tty: tty to update
* @new_termios: desired new value
*
@@ -497,7 +497,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
* Locking: termios_mutex
*/
-static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
+int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
struct ktermios old_termios;
struct tty_ldisc *ld;
@@ -553,7 +553,9 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
tty_ldisc_deref(ld);
}
mutex_unlock(&tty->termios_mutex);
+ return 0;
}
+EXPORT_SYMBOL_GPL(tty_set_termios);
/**
* set_termios - set termios values for a tty
@@ -562,7 +564,7 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
* @opt: option information
*
* Helper function to prepare termios data and run necessary other
- * functions before using change_termios to do the actual changes.
+ * functions before using tty_set_termios to do the actual changes.
*
* Locking:
* Called functions take ldisc and termios_mutex locks
@@ -620,7 +622,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
return -EINTR;
}
- change_termios(tty, &tmp_termios);
+ tty_set_termios(tty, &tmp_termios);
/* FIXME: Arguably if tmp_termios == tty->termios AND the
actual requested termios was not tmp_termios then we may
@@ -797,7 +799,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
termios.c_ospeed);
#endif
mutex_unlock(&tty->termios_mutex);
- change_termios(tty, &termios);
+ tty_set_termios(tty, &termios);
return 0;
}
#endif
@@ -951,6 +953,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
int ret = 0;
struct ktermios kterm;
+ BUG_ON(file == NULL);
+
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
real_tty = tty->link;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 4214d58276f..c42f402db9b 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -535,6 +535,19 @@ static int tty_ldisc_halt(struct tty_struct *tty)
}
/**
+ * tty_ldisc_flush_works - flush all works of a tty
+ * @tty: tty device to flush works for
+ *
+ * Sync flush all works belonging to @tty.
+ */
+static void tty_ldisc_flush_works(struct tty_struct *tty)
+{
+ flush_work_sync(&tty->hangup_work);
+ flush_work_sync(&tty->SAK_work);
+ flush_delayed_work_sync(&tty->buf.work);
+}
+
+/**
* tty_ldisc_wait_idle - wait for the ldisc to become idle
* @tty: tty to wait for
*
@@ -653,7 +666,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
mutex_unlock(&tty->ldisc_mutex);
- flush_scheduled_work();
+ tty_ldisc_flush_works(tty);
retval = tty_ldisc_wait_idle(tty);
@@ -905,7 +918,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
tty_unlock();
tty_ldisc_halt(tty);
- flush_scheduled_work();
+ tty_ldisc_flush_works(tty);
tty_lock();
mutex_lock(&tty->ldisc_mutex);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index e95d7876ca6..6dd3c68c13a 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -654,7 +654,8 @@ static void k_spec(struct vc_data *vc, unsigned char value, char up_flag)
if (value >= ARRAY_SIZE(fn_handler))
return;
if ((kbd->kbdmode == VC_RAW ||
- kbd->kbdmode == VC_MEDIUMRAW) &&
+ kbd->kbdmode == VC_MEDIUMRAW ||
+ kbd->kbdmode == VC_OFF) &&
value != KVAL(K_SAK))
return; /* SAK is allowed even in raw mode */
fn_handler[value](vc);
@@ -1295,7 +1296,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
if (rc == NOTIFY_STOP)
return;
- if (raw_mode && type != KT_SPEC && type != KT_SHIFT)
+ if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT)
return;
(*k_handler[type])(vc, keysym & 0xff, !down);
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index a672ed192d3..7b3bfbe2e6d 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -28,7 +28,6 @@
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/init.h>
-#include <linux/mutex.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
#include <linux/kbd_kern.h>
@@ -51,6 +50,8 @@
#undef addr
#define HEADER_SIZE 4
+#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE)
+
struct vcs_poll_data {
struct notifier_block notifier;
unsigned int cons_num;
@@ -131,21 +132,45 @@ vcs_poll_data_get(struct file *file)
return poll;
}
+/*
+ * Returns VC for inode.
+ * Must be called with console_lock.
+ */
+static struct vc_data*
+vcs_vc(struct inode *inode, int *viewed)
+{
+ unsigned int currcons = iminor(inode) & 127;
+
+ WARN_CONSOLE_UNLOCKED();
+
+ if (currcons == 0) {
+ currcons = fg_console;
+ if (viewed)
+ *viewed = 1;
+ } else {
+ currcons--;
+ if (viewed)
+ *viewed = 0;
+ }
+ return vc_cons[currcons].d;
+}
+
+/*
+ * Returns size for VC carried by inode.
+ * Must be called with console_lock.
+ */
static int
vcs_size(struct inode *inode)
{
int size;
int minor = iminor(inode);
- int currcons = minor & 127;
struct vc_data *vc;
- if (currcons == 0)
- currcons = fg_console;
- else
- currcons--;
- if (!vc_cons_allocated(currcons))
+ WARN_CONSOLE_UNLOCKED();
+
+ vc = vcs_vc(inode, NULL);
+ if (!vc)
return -ENXIO;
- vc = vc_cons[currcons].d;
size = vc->vc_rows * vc->vc_cols;
@@ -158,11 +183,13 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig)
{
int size;
- mutex_lock(&con_buf_mtx);
+ console_lock();
size = vcs_size(file->f_path.dentry->d_inode);
+ console_unlock();
+ if (size < 0)
+ return size;
switch (orig) {
default:
- mutex_unlock(&con_buf_mtx);
return -EINVAL;
case 2:
offset += size;
@@ -173,11 +200,9 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig)
break;
}
if (offset < 0 || offset > size) {
- mutex_unlock(&con_buf_mtx);
return -EINVAL;
}
file->f_pos = offset;
- mutex_unlock(&con_buf_mtx);
return file->f_pos;
}
@@ -190,12 +215,15 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
struct vc_data *vc;
struct vcs_poll_data *poll;
long pos;
- long viewed, attr, read;
- int col, maxcol;
+ long attr, read;
+ int col, maxcol, viewed;
unsigned short *org = NULL;
ssize_t ret;
+ char *con_buf;
- mutex_lock(&con_buf_mtx);
+ con_buf = (char *) __get_free_page(GFP_KERNEL);
+ if (!con_buf)
+ return -ENOMEM;
pos = *ppos;
@@ -205,18 +233,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
console_lock();
attr = (currcons & 128);
- currcons = (currcons & 127);
- if (currcons == 0) {
- currcons = fg_console;
- viewed = 1;
- } else {
- currcons--;
- viewed = 0;
- }
ret = -ENXIO;
- if (!vc_cons_allocated(currcons))
+ vc = vcs_vc(inode, &viewed);
+ if (!vc)
goto unlock_out;
- vc = vc_cons[currcons].d;
ret = -EINVAL;
if (pos < 0)
@@ -237,6 +257,12 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
* could sleep.
*/
size = vcs_size(inode);
+ if (size < 0) {
+ if (read)
+ break;
+ ret = size;
+ goto unlock_out;
+ }
if (pos >= size)
break;
if (count > size - pos)
@@ -355,7 +381,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
ret = read;
unlock_out:
console_unlock();
- mutex_unlock(&con_buf_mtx);
+ free_page((unsigned long) con_buf);
return ret;
}
@@ -366,13 +392,16 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
unsigned int currcons = iminor(inode);
struct vc_data *vc;
long pos;
- long viewed, attr, size, written;
+ long attr, size, written;
char *con_buf0;
- int col, maxcol;
+ int col, maxcol, viewed;
u16 *org0 = NULL, *org = NULL;
size_t ret;
+ char *con_buf;
- mutex_lock(&con_buf_mtx);
+ con_buf = (char *) __get_free_page(GFP_KERNEL);
+ if (!con_buf)
+ return -ENOMEM;
pos = *ppos;
@@ -382,19 +411,10 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
console_lock();
attr = (currcons & 128);
- currcons = (currcons & 127);
-
- if (currcons == 0) {
- currcons = fg_console;
- viewed = 1;
- } else {
- currcons--;
- viewed = 0;
- }
ret = -ENXIO;
- if (!vc_cons_allocated(currcons))
+ vc = vcs_vc(inode, &viewed);
+ if (!vc)
goto unlock_out;
- vc = vc_cons[currcons].d;
size = vcs_size(inode);
ret = -EINVAL;
@@ -436,6 +456,12 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
* Return data written up to now on failure.
*/
size = vcs_size(inode);
+ if (size < 0) {
+ if (written)
+ break;
+ ret = size;
+ goto unlock_out;
+ }
if (pos >= size)
break;
if (this_round > size - pos)
@@ -543,9 +569,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
unlock_out:
console_unlock();
-
- mutex_unlock(&con_buf_mtx);
-
+ free_page((unsigned long) con_buf);
return ret;
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 147ede3423d..798df6f8911 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2068,18 +2068,6 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
}
}
-/* This is a temporary buffer used to prepare a tty console write
- * so that we can easily avoid touching user space while holding the
- * console spinlock. It is allocated in con_init and is shared by
- * this code and the vc_screen read/write tty calls.
- *
- * We have to allocate this statically in the kernel data section
- * since console_init (and thus con_init) are called before any
- * kernel memory allocation is available.
- */
-char con_buf[CON_BUF_SIZE];
-DEFINE_MUTEX(con_buf_mtx);
-
/* is_double_width() is based on the wcwidth() implementation by
* Markus Kuhn -- 2007-05-26 (Unicode 5.0)
* Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
@@ -2157,10 +2145,10 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
currcons = vc->vc_num;
if (!vc_cons_allocated(currcons)) {
- /* could this happen? */
- printk_once("con_write: tty %d not allocated\n", currcons+1);
- console_unlock();
- return 0;
+ /* could this happen? */
+ pr_warn_once("con_write: tty %d not allocated\n", currcons+1);
+ console_unlock();
+ return 0;
}
himask = vc->vc_hi_font_mask;
@@ -2940,7 +2928,7 @@ static int __init con_init(void)
gotoxy(vc, vc->vc_x, vc->vc_y);
csi_J(vc, 0);
update_screen(vc);
- printk("Console: %s %s %dx%d",
+ pr_info("Console: %s %s %dx%d",
vc->vc_can_do_color ? "colour" : "mono",
display_desc, vc->vc_cols, vc->vc_rows);
printable = 1;
@@ -3103,7 +3091,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last,
clear_buffer_attributes(vc);
}
- printk("Console: switching ");
+ pr_info("Console: switching ");
if (!deflt)
printk("consoles %d-%d ", first+1, last+1);
if (j >= 0) {
@@ -3809,7 +3797,8 @@ void do_unblank_screen(int leaving_gfx)
return;
if (!vc_cons_allocated(fg_console)) {
/* impossible */
- printk("unblank_screen: tty %d not allocated ??\n", fg_console+1);
+ pr_warning("unblank_screen: tty %d not allocated ??\n",
+ fg_console+1);
return;
}
vc = vc_cons[fg_console].d;
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 1235ebda6e1..b6480496531 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -495,7 +495,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
* We handle the console-specific ioctl's here. We allow the
* capability to modify any console, not just the fg_console.
*/
-int vt_ioctl(struct tty_struct *tty, struct file * file,
+int vt_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct vc_data *vc = tty->driver_data;
@@ -688,6 +688,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
kbd->kbdmode = VC_UNICODE;
compute_shiftstate();
break;
+ case K_OFF:
+ kbd->kbdmode = VC_OFF;
+ break;
default:
ret = -EINVAL;
goto out;
@@ -1007,8 +1010,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
if (ret)
break;
/* Commence switch and lock */
- set_console(arg);
+ set_console(vsa.console);
}
+ break;
}
/*
@@ -1491,7 +1495,7 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud,
return 0;
}
-long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+long vt_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct vc_data *vc = tty->driver_data;
@@ -1577,7 +1581,7 @@ out:
fallback:
tty_unlock();
- return vt_ioctl(tty, file, cmd, arg);
+ return vt_ioctl(tty, cmd, arg);
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 4ab49d4eebf..f492a7f2b6e 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -776,7 +776,7 @@ static int acm_tty_break_ctl(struct tty_struct *tty, int state)
return retval;
}
-static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file)
+static int acm_tty_tiocmget(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
@@ -791,7 +791,7 @@ static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file)
TIOCM_CTS;
}
-static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
+static int acm_tty_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct acm *acm = tty->driver_data;
@@ -813,7 +813,7 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
return acm_set_control(acm, acm->ctrlout = newctrl);
}
-static int acm_tty_ioctl(struct tty_struct *tty, struct file *file,
+static int acm_tty_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct acm *acm = tty->driver_data;
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 8f1d4fb19d2..5cdb9d91227 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -431,7 +431,7 @@ static int ark3116_get_icount(struct tty_struct *tty,
return 0;
}
-static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
+static int ark3116_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -485,7 +485,7 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
return -ENOIOCTLCMD;
}
-static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
+static int ark3116_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct ark3116_private *priv = usb_get_serial_port_data(port);
@@ -511,7 +511,7 @@ static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
(ctrl & UART_MCR_OUT2 ? TIOCM_OUT2 : 0);
}
-static int ark3116_tiocmset(struct tty_struct *tty, struct file *file,
+static int ark3116_tiocmset(struct tty_struct *tty,
unsigned set, unsigned clr)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 36df35295db..d6921fa1403 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -100,8 +100,8 @@ static void belkin_sa_process_read_urb(struct urb *urb);
static void belkin_sa_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios * old);
static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
-static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file);
-static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
+static int belkin_sa_tiocmget(struct tty_struct *tty);
+static int belkin_sa_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
@@ -497,7 +497,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
dev_err(&port->dev, "Set break_ctl %d\n", break_state);
}
-static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
+static int belkin_sa_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct belkin_sa_private *priv = usb_get_serial_port_data(port);
@@ -513,7 +513,7 @@ static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
return control_state;
}
-static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
+static int belkin_sa_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 14ac87ee925..6ae1c0688b5 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -432,7 +432,7 @@ out:
kfree(break_reg);
}
-static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
+static int ch341_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -553,8 +553,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
return 0;
}
-/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
-static int ch341_ioctl(struct tty_struct *tty, struct file *file,
+static int ch341_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -573,7 +572,7 @@ static int ch341_ioctl(struct tty_struct *tty, struct file *file,
return -ENOIOCTLCMD;
}
-static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
+static int ch341_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct ch341_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 735ea03157a..4df3e0cecba 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -41,10 +41,9 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
struct ktermios*);
-static int cp210x_tiocmget(struct tty_struct *, struct file *);
-static int cp210x_tiocmset(struct tty_struct *, struct file *,
- unsigned int, unsigned int);
-static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
+static int cp210x_tiocmget(struct tty_struct *);
+static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
unsigned int, unsigned int);
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
@@ -698,14 +697,14 @@ static void cp210x_set_termios(struct tty_struct *tty,
}
-static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
+static int cp210x_tiocmset (struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
- return cp210x_tiocmset_port(port, file, set, clear);
+ return cp210x_tiocmset_port(port, set, clear);
}
-static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
unsigned int set, unsigned int clear)
{
unsigned int control = 0;
@@ -737,12 +736,12 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
{
if (on)
- cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0);
+ cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
else
- cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS);
+ cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
}
-static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
+static int cp210x_tiocmget (struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int control;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 2edf238b00b..987e9bf7bd0 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -169,12 +169,12 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static void cypress_send(struct usb_serial_port *port);
static int cypress_write_room(struct tty_struct *tty);
-static int cypress_ioctl(struct tty_struct *tty, struct file *file,
+static int cypress_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void cypress_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
-static int cypress_tiocmget(struct tty_struct *tty, struct file *file);
-static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
+static int cypress_tiocmget(struct tty_struct *tty);
+static int cypress_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int cypress_chars_in_buffer(struct tty_struct *tty);
static void cypress_throttle(struct tty_struct *tty);
@@ -864,7 +864,7 @@ static int cypress_write_room(struct tty_struct *tty)
}
-static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
+static int cypress_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct cypress_private *priv = usb_get_serial_port_data(port);
@@ -892,7 +892,7 @@ static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
}
-static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
+static int cypress_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -917,7 +917,7 @@ static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
}
-static int cypress_ioctl(struct tty_struct *tty, struct file *file,
+static int cypress_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 666e5a6edd8..86fbba6336c 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -445,11 +445,11 @@ static void digi_rx_unthrottle(struct tty_struct *tty);
static void digi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
static void digi_break_ctl(struct tty_struct *tty, int break_state);
-static int digi_tiocmget(struct tty_struct *tty, struct file *file);
-static int digi_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear);
+static int digi_tiocmget(struct tty_struct *tty);
+static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
+ unsigned int clear);
static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *buf, int count);
+ const unsigned char *buf, int count);
static void digi_write_bulk_callback(struct urb *urb);
static int digi_write_room(struct tty_struct *tty);
static int digi_chars_in_buffer(struct tty_struct *tty);
@@ -1118,7 +1118,7 @@ static void digi_break_ctl(struct tty_struct *tty, int break_state)
}
-static int digi_tiocmget(struct tty_struct *tty, struct file *file)
+static int digi_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct digi_port *priv = usb_get_serial_port_data(port);
@@ -1134,8 +1134,8 @@ static int digi_tiocmget(struct tty_struct *tty, struct file *file)
}
-static int digi_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int digi_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct digi_port *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a75f9298d88..65967b36365 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -866,10 +866,10 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
void *dest, size_t size);
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
-static int ftdi_tiocmget(struct tty_struct *tty, struct file *file);
-static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
+static int ftdi_tiocmget(struct tty_struct *tty);
+static int ftdi_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
-static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
+static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
@@ -2178,7 +2178,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
}
}
-static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
+static int ftdi_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2231,7 +2231,7 @@ out:
return ret;
}
-static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
+static int ftdi_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2239,7 +2239,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
return update_mctrl(port, set, clear);
}
-static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
+static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 76e3e502c23..f1aedfa7c42 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -216,11 +216,11 @@ static void edge_unthrottle(struct tty_struct *tty);
static void edge_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
struct ktermios *old_termios);
-static int edge_ioctl(struct tty_struct *tty, struct file *file,
+static int edge_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void edge_break(struct tty_struct *tty, int break_state);
-static int edge_tiocmget(struct tty_struct *tty, struct file *file);
-static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+static int edge_tiocmget(struct tty_struct *tty);
+static int edge_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int edge_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
@@ -1568,7 +1568,7 @@ static int get_lsr_info(struct edgeport_port *edge_port,
return 0;
}
-static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+static int edge_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1599,7 +1599,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int edge_tiocmget(struct tty_struct *tty, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -1679,7 +1679,7 @@ static int get_serial_info(struct edgeport_port *edge_port,
* SerialIoctl
* this function handles any ioctl calls to the driver
*****************************************************************************/
-static int edge_ioctl(struct tty_struct *tty, struct file *file,
+static int edge_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 22506b095c4..d8434910fa7 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2444,7 +2444,7 @@ static void edge_set_termios(struct tty_struct *tty,
change_port_settings(tty, edge_port, old_termios);
}
-static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+static int edge_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2477,7 +2477,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int edge_tiocmget(struct tty_struct *tty, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -2552,7 +2552,7 @@ static int get_serial_info(struct edgeport_port *edge_port,
return 0;
}
-static int edge_ioctl(struct tty_struct *tty, struct file *file,
+static int edge_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 99b97c04896..6aca631a407 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -150,7 +150,7 @@ static void iuu_release(struct usb_serial *serial)
}
}
-static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
+static int iuu_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -179,7 +179,7 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
* When no card , the reader respond with TIOCM_CD
* This is known as CD autodetect mechanism
*/
-static int iuu_tiocmget(struct tty_struct *tty, struct file *file)
+static int iuu_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct iuu_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 67f41b52657..a442352d7b6 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -301,7 +301,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
keyspan_send_setup(port, 0);
}
-static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
+static int keyspan_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
@@ -317,7 +317,7 @@ static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
return value;
}
-static int keyspan_tiocmset(struct tty_struct *tty, struct file *file,
+static int keyspan_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index ce134dc28dd..13fa1d1cc90 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -58,10 +58,9 @@ static void keyspan_set_termios (struct tty_struct *tty,
struct ktermios *old);
static void keyspan_break_ctl (struct tty_struct *tty,
int break_state);
-static int keyspan_tiocmget (struct tty_struct *tty,
- struct file *file);
+static int keyspan_tiocmget (struct tty_struct *tty);
static int keyspan_tiocmset (struct tty_struct *tty,
- struct file *file, unsigned int set,
+ unsigned int set,
unsigned int clear);
static int keyspan_fake_startup (struct usb_serial *serial);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 7b690f3282a..d5c0c6ab496 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -458,7 +458,7 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial,
return rc;
}
-static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file)
+static int keyspan_pda_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
@@ -479,7 +479,7 @@ static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file)
return value;
}
-static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file,
+static int keyspan_pda_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index e8a65ce45a2..19373cb7c5b 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -68,8 +68,8 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
static void klsi_105_close(struct usb_serial_port *port);
static void klsi_105_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
-static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file);
-static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+static int klsi_105_tiocmget(struct tty_struct *tty);
+static int klsi_105_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static void klsi_105_process_read_urb(struct urb *urb);
static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
@@ -637,7 +637,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
}
#endif
-static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
+static int klsi_105_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct klsi_105_private *priv = usb_get_serial_port_data(port);
@@ -661,7 +661,7 @@ static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
return (int)line_state;
}
-static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+static int klsi_105_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
int retval = -EINVAL;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index b382d9a0274..ddd146300dd 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -75,10 +75,10 @@ static void kobil_close(struct usb_serial_port *port);
static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int kobil_write_room(struct tty_struct *tty);
-static int kobil_ioctl(struct tty_struct *tty, struct file *file,
+static int kobil_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
-static int kobil_tiocmget(struct tty_struct *tty, struct file *file);
-static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
+static int kobil_tiocmget(struct tty_struct *tty);
+static int kobil_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static void kobil_read_int_callback(struct urb *urb);
static void kobil_write_callback(struct urb *purb);
@@ -504,7 +504,7 @@ static int kobil_write_room(struct tty_struct *tty)
}
-static int kobil_tiocmget(struct tty_struct *tty, struct file *file)
+static int kobil_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct kobil_private *priv;
@@ -544,7 +544,7 @@ static int kobil_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
-static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
+static int kobil_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -668,7 +668,7 @@ static void kobil_set_termios(struct tty_struct *tty,
);
}
-static int kobil_ioctl(struct tty_struct *tty, struct file *file,
+static int kobil_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 1e225aacf46..d2c019637e4 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -103,8 +103,8 @@ static void mct_u232_read_int_callback(struct urb *urb);
static void mct_u232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
-static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file);
-static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
+static int mct_u232_tiocmget(struct tty_struct *tty);
+static int mct_u232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int mct_u232_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
@@ -790,7 +790,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
} /* mct_u232_break_ctl */
-static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file)
+static int mct_u232_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -806,7 +806,7 @@ static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file)
return control_state;
}
-static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
+static int mct_u232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index ae506f4ee29..40abedbc594 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1833,7 +1833,7 @@ static int get_lsr_info(struct tty_struct *tty,
return 0;
}
-static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
+static int mos7720_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
@@ -1858,14 +1858,14 @@ static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
-static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
+static int mos7720_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
unsigned int mcr ;
dbg("%s - port %d", __func__, port->number);
- dbg("he was at tiocmget");
+ dbg("he was at tiocmset");
mcr = mos7720_port->shadowMCR;
@@ -1987,7 +1987,7 @@ static int get_serial_info(struct moschip_port *mos7720_port,
return 0;
}
-static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
+static int mos7720_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 5627993f9e4..7b50aa12275 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1644,7 +1644,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
}
}
-static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
+static int mos7840_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7840_port;
@@ -1674,7 +1674,7 @@ static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
-static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
+static int mos7840_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2235,7 +2235,7 @@ static int mos7840_get_icount(struct tty_struct *tty,
* this function handles any ioctl calls to the driver
*****************************************************************************/
-static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
+static int mos7840_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index ce82396fc4e..201f6096844 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -391,7 +391,7 @@ static void opticon_unthrottle(struct tty_struct *tty)
}
}
-static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
+static int opticon_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct opticon_private *priv = usb_get_serial_data(port->serial);
@@ -468,7 +468,7 @@ static int get_serial_info(struct opticon_private *priv,
return 0;
}
-static int opticon_ioctl(struct tty_struct *tty, struct file *file,
+static int opticon_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 73613205be7..4c29e6c2bda 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -135,7 +135,7 @@ static void oti6858_close(struct usb_serial_port *port);
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static void oti6858_init_termios(struct tty_struct *tty);
-static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
+static int oti6858_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void oti6858_read_int_callback(struct urb *urb);
static void oti6858_read_bulk_callback(struct urb *urb);
@@ -144,8 +144,8 @@ static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int oti6858_write_room(struct tty_struct *tty);
static int oti6858_chars_in_buffer(struct tty_struct *tty);
-static int oti6858_tiocmget(struct tty_struct *tty, struct file *file);
-static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
+static int oti6858_tiocmget(struct tty_struct *tty);
+static int oti6858_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int oti6858_startup(struct usb_serial *serial);
static void oti6858_release(struct usb_serial *serial);
@@ -624,7 +624,7 @@ static void oti6858_close(struct usb_serial_port *port)
usb_kill_urb(port->interrupt_in_urb);
}
-static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
+static int oti6858_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -657,7 +657,7 @@ static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int oti6858_tiocmget(struct tty_struct *tty, struct file *file)
+static int oti6858_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct oti6858_private *priv = usb_get_serial_port_data(port);
@@ -728,7 +728,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
return 0;
}
-static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
+static int oti6858_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 08c9181b8e4..30461fcc220 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -505,7 +505,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
return 0;
}
-static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
+static int pl2303_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -531,7 +531,7 @@ static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
return set_control_lines(port->serial->dev, control);
}
-static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
+static int pl2303_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -606,7 +606,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
return 0;
}
-static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
+static int pl2303_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct serial_struct ser;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 5b88b6836a8..d5d136a53b6 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -395,7 +395,7 @@ static void sierra_set_termios(struct tty_struct *tty,
sierra_send_setup(port);
}
-static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
+static int sierra_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int value;
@@ -414,7 +414,7 @@ static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
return value;
}
-static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
+static int sierra_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index cbfb70bffdd..180ea6c7911 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -576,7 +576,7 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
return 0;
}
-static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
+static int spcp8x5_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -595,7 +595,7 @@ static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
return -ENOIOCTLCMD;
}
-static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
+static int spcp8x5_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -618,7 +618,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
}
-static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
+static int spcp8x5_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 8359ec79895..87362e48796 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -439,7 +439,7 @@ static int ssu100_get_icount(struct tty_struct *tty,
-static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
+static int ssu100_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -484,7 +484,7 @@ static int ssu100_attach(struct usb_serial *serial)
return ssu100_initdevice(serial->dev);
}
-static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
+static int ssu100_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_device *dev = port->serial->dev;
@@ -517,7 +517,7 @@ mget_out:
return r;
}
-static int ssu100_tiocmset(struct tty_struct *tty, struct file *file,
+static int ssu100_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a910004f407..c6d92a53008 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -106,14 +106,14 @@ static int ti_write_room(struct tty_struct *tty);
static int ti_chars_in_buffer(struct tty_struct *tty);
static void ti_throttle(struct tty_struct *tty);
static void ti_unthrottle(struct tty_struct *tty);
-static int ti_ioctl(struct tty_struct *tty, struct file *file,
+static int ti_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static int ti_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
static void ti_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
-static int ti_tiocmget(struct tty_struct *tty, struct file *file);
-static int ti_tiocmset(struct tty_struct *tty, struct file *file,
+static int ti_tiocmget(struct tty_struct *tty);
+static int ti_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static void ti_break(struct tty_struct *tty, int break_state);
static void ti_interrupt_callback(struct urb *urb);
@@ -818,7 +818,7 @@ static int ti_get_icount(struct tty_struct *tty,
return 0;
}
-static int ti_ioctl(struct tty_struct *tty, struct file *file,
+static int ti_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1000,7 +1000,7 @@ static void ti_set_termios(struct tty_struct *tty,
}
-static int ti_tiocmget(struct tty_struct *tty, struct file *file)
+static int ti_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
@@ -1033,8 +1033,8 @@ static int ti_tiocmget(struct tty_struct *tty, struct file *file)
}
-static int ti_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int ti_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 2ff90a9c8f4..1c031309ab2 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -406,7 +406,7 @@ static void serial_unthrottle(struct tty_struct *tty)
port->serial->type->unthrottle(tty);
}
-static int serial_ioctl(struct tty_struct *tty, struct file *file,
+static int serial_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
@@ -417,7 +417,7 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file,
/* pass on to the driver specific version of this function
if it is available */
if (port->serial->type->ioctl) {
- retval = port->serial->type->ioctl(tty, file, cmd, arg);
+ retval = port->serial->type->ioctl(tty, cmd, arg);
} else
retval = -ENOIOCTLCMD;
return retval;
@@ -496,18 +496,18 @@ static const struct file_operations serial_proc_fops = {
.release = single_release,
};
-static int serial_tiocmget(struct tty_struct *tty, struct file *file)
+static int serial_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
if (port->serial->type->tiocmget)
- return port->serial->type->tiocmget(tty, file);
+ return port->serial->type->tiocmget(tty);
return -EINVAL;
}
-static int serial_tiocmset(struct tty_struct *tty, struct file *file,
+static int serial_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -515,7 +515,7 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
dbg("%s - port %d", __func__, port->number);
if (port->serial->type->tiocmset)
- return port->serial->type->tiocmset(tty, file, set, clear);
+ return port->serial->type->tiocmset(tty, set, clear);
return -EINVAL;
}
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 3ab77c5d981..c47b6ec0306 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -15,10 +15,10 @@ extern int usb_wwan_write_room(struct tty_struct *tty);
extern void usb_wwan_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
struct ktermios *old);
-extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
-extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+extern int usb_wwan_tiocmget(struct tty_struct *tty);
+extern int usb_wwan_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
-extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+extern int usb_wwan_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
extern int usb_wwan_send_setup(struct usb_serial_port *port);
extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index eb95aecc001..a65ddd54386 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -79,7 +79,7 @@ void usb_wwan_set_termios(struct tty_struct *tty,
}
EXPORT_SYMBOL(usb_wwan_set_termios);
-int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
+int usb_wwan_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int value;
@@ -98,7 +98,7 @@ int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
}
EXPORT_SYMBOL(usb_wwan_tiocmget);
-int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+int usb_wwan_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -178,7 +178,7 @@ static int set_serial_info(struct usb_serial_port *port,
return retval;
}
-int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+int usb_wwan_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 3f9ac88d588..5b073bcc807 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -152,12 +152,12 @@ static int whiteheat_write(struct tty_struct *tty,
struct usb_serial_port *port,
const unsigned char *buf, int count);
static int whiteheat_write_room(struct tty_struct *tty);
-static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+static int whiteheat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void whiteheat_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
-static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file);
-static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
+static int whiteheat_tiocmget(struct tty_struct *tty);
+static int whiteheat_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
static int whiteheat_chars_in_buffer(struct tty_struct *tty);
@@ -833,7 +833,7 @@ static int whiteheat_write_room(struct tty_struct *tty)
return (room);
}
-static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file)
+static int whiteheat_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_private *info = usb_get_serial_port_data(port);
@@ -850,7 +850,7 @@ static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file)
return modem_signals;
}
-static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
+static int whiteheat_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -874,7 +874,7 @@ static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
}
-static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+static int whiteheat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;