5 files changed, 19 insertions, 15 deletions
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index beadb86eeca..3b9311b58b5 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -185,6 +185,8 @@ struct d40_base;
  * @log_def: Default logical channel settings.
  * @lcla: Space for one dst src pair for logical channel transfers.
  * @lcpa: Pointer to dst and src lcpa settings.
+ * @runtime_addr: runtime configured address.
+ * @runtime_direction: runtime configured direction.
  *
  * This struct can either "be" a logical or a physical channel.
  */
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c732d7..be27545f16f 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -353,7 +353,7 @@ static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
 /**
  * nmk_config_pin - configure a pin's mux attributes
  * @cfg: pin confguration
- *
+ * @sleep: Non-zero to apply the sleep mode configuration
  * Configures a pin's mode (alternate function or GPIO), its pull up status,
  * and its sleep mode based on the specified configuration.  The @cfg is
  * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 1af968fc4f1..a885960f7e2 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -135,18 +135,19 @@ struct i2c_nmk_client {
 };
 
 /**
- * struct nmk_i2c_dev - private data structure of the controller
- * @pdev: parent platform device
- * @adap: corresponding I2C adapter
- * @irq: interrupt line for the controller
- * @virtbase: virtual io memory area
- * @clk: hardware i2c block clock
- * @cfg: machine provided controller configuration
- * @cli: holder of client specific data
- * @stop: stop condition
- * @xfer_complete: acknowledge completion for a I2C message
- * @result: controller propogated result
- * @busy: Busy doing transfer
+ * struct nmk_i2c_dev - private data structure of the controller.
+ * @pdev: parent platform device.
+ * @adap: corresponding I2C adapter.
+ * @irq: interrupt line for the controller.
+ * @virtbase: virtual io memory area.
+ * @clk: hardware i2c block clock.
+ * @cfg: machine provided controller configuration.
+ * @cli: holder of client specific data.
+ * @stop: stop condition.
+ * @xfer_complete: acknowledge completion for a I2C message.
+ * @result: controller propogated result.
+ * @regulator: pointer to i2c regulator.
+ * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
 	struct platform_device		*pdev;
@@ -683,7 +684,7 @@ out:
 /**
  * disable_interrupts() - disable the interrupts
  * @dev: private data of controller
- * @irq: interrupt number
+ * @irq: interrupt number.
  */
 static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
 {
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index a791d415e8d..f9abf20975b 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -228,7 +228,7 @@ int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
 EXPORT_SYMBOL_GPL(stmpe_block_write);
 
 /**
- * stmpe_set_altfunc: set the alternate function for STMPE pins
+ * stmpe_set_altfunc()- set the alternate function for STMPE pins
  * @stmpe:	Device to configure
  * @pins:	Bitmask of pins to affect
  * @block:	block to enable alternate functions for
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 0dbdc4e8cd7..e4ee3895658 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -42,6 +42,7 @@ struct stmpe_variant_block {
  * @id_mask:	bits valid in CHIPID register for comparison with id_val
  * @num_gpios:	number of GPIOS
  * @af_bits:	number of bits used to specify the alternate function
+ * @regs: variant specific registers.
  * @blocks:	list of blocks present on this device
  * @num_blocks:	number of blocks present on this device
  * @num_irqs:	number of internal IRQs available on this device