diff options
Diffstat (limited to 'include/linux')
65 files changed, 1115 insertions, 264 deletions
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index cb784579956..ad3b787479a 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -1,6 +1,6 @@ /* * Copyright (C) 2001 Sistina Software (UK) Limited. - * Copyright (C) 2004 Red Hat, Inc. All rights reserved. + * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved. * * This file is released under the LGPL. */ @@ -10,6 +10,8 @@ #ifdef __KERNEL__ +#include <linux/bio.h> + struct dm_target; struct dm_table; struct dm_dev; @@ -250,11 +252,97 @@ void dm_table_event(struct dm_table *t); */ int dm_swap_table(struct mapped_device *md, struct dm_table *t); +/*----------------------------------------------------------------- + * Macros. + *---------------------------------------------------------------*/ +#define DM_NAME "device-mapper" + +#define DMERR(f, arg...) \ + printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg) +#define DMERR_LIMIT(f, arg...) \ + do { \ + if (printk_ratelimit()) \ + printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " \ + f "\n", ## arg); \ + } while (0) + +#define DMWARN(f, arg...) \ + printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg) +#define DMWARN_LIMIT(f, arg...) \ + do { \ + if (printk_ratelimit()) \ + printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " \ + f "\n", ## arg); \ + } while (0) + +#define DMINFO(f, arg...) \ + printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg) +#define DMINFO_LIMIT(f, arg...) \ + do { \ + if (printk_ratelimit()) \ + printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f \ + "\n", ## arg); \ + } while (0) + +#ifdef CONFIG_DM_DEBUG +# define DMDEBUG(f, arg...) \ + printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX " DEBUG: " f "\n", ## arg) +# define DMDEBUG_LIMIT(f, arg...) \ + do { \ + if (printk_ratelimit()) \ + printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX ": " f \ + "\n", ## arg); \ + } while (0) +#else +# define DMDEBUG(f, arg...) do {} while (0) +# define DMDEBUG_LIMIT(f, arg...) do {} while (0) +#endif + +#define DMEMIT(x...) sz += ((sz >= maxlen) ? \ + 0 : scnprintf(result + sz, maxlen - sz, x)) + +#define SECTOR_SHIFT 9 + +/* + * Definitions of return values from target end_io function. + */ +#define DM_ENDIO_INCOMPLETE 1 +#define DM_ENDIO_REQUEUE 2 + +/* + * Definitions of return values from target map function. + */ +#define DM_MAPIO_SUBMITTED 0 +#define DM_MAPIO_REMAPPED 1 +#define DM_MAPIO_REQUEUE DM_ENDIO_REQUEUE + +/* + * Ceiling(n / sz) + */ +#define dm_div_up(n, sz) (((n) + (sz) - 1) / (sz)) + +#define dm_sector_div_up(n, sz) ( \ +{ \ + sector_t _r = ((n) + (sz) - 1); \ + sector_div(_r, (sz)); \ + _r; \ +} \ +) + /* - * Prepare a table for a device that will error all I/O. - * To make it active, call dm_suspend(), dm_swap_table() then dm_resume(). + * ceiling(n / size) * size */ -int dm_create_error_table(struct dm_table **result, struct mapped_device *md); +#define dm_round_up(n, sz) (dm_div_up((n), (sz)) * (sz)) + +static inline sector_t to_sector(unsigned long n) +{ + return (n >> SECTOR_SHIFT); +} + +static inline unsigned long to_bytes(sector_t n) +{ + return (n << SECTOR_SHIFT); +} #endif /* __KERNEL__ */ #endif /* _LINUX_DEVICE_MAPPER_H */ diff --git a/include/linux/dm-dirty-log.h b/include/linux/dm-dirty-log.h new file mode 100644 index 00000000000..600c5fb2daa --- /dev/null +++ b/include/linux/dm-dirty-log.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2003 Sistina Software + * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved. + * + * Device-Mapper dirty region log. + * + * This file is released under the LGPL. + */ + +#ifndef _LINUX_DM_DIRTY_LOG +#define _LINUX_DM_DIRTY_LOG + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/device-mapper.h> + +typedef sector_t region_t; + +struct dm_dirty_log_type; + +struct dm_dirty_log { + struct dm_dirty_log_type *type; + void *context; +}; + +struct dm_dirty_log_type { + const char *name; + struct module *module; + + int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti, + unsigned argc, char **argv); + void (*dtr)(struct dm_dirty_log *log); + + /* + * There are times when we don't want the log to touch + * the disk. + */ + int (*presuspend)(struct dm_dirty_log *log); + int (*postsuspend)(struct dm_dirty_log *log); + int (*resume)(struct dm_dirty_log *log); + + /* + * Retrieves the smallest size of region that the log can + * deal with. + */ + uint32_t (*get_region_size)(struct dm_dirty_log *log); + + /* + * A predicate to say whether a region is clean or not. + * May block. + */ + int (*is_clean)(struct dm_dirty_log *log, region_t region); + + /* + * Returns: 0, 1, -EWOULDBLOCK, < 0 + * + * A predicate function to check the area given by + * [sector, sector + len) is in sync. + * + * If -EWOULDBLOCK is returned the state of the region is + * unknown, typically this will result in a read being + * passed to a daemon to deal with, since a daemon is + * allowed to block. + */ + int (*in_sync)(struct dm_dirty_log *log, region_t region, + int can_block); + + /* + * Flush the current log state (eg, to disk). This + * function may block. + */ + int (*flush)(struct dm_dirty_log *log); + + /* + * Mark an area as clean or dirty. These functions may + * block, though for performance reasons blocking should + * be extremely rare (eg, allocating another chunk of + * memory for some reason). + */ + void (*mark_region)(struct dm_dirty_log *log, region_t region); + void (*clear_region)(struct dm_dirty_log *log, region_t region); + + /* + * Returns: <0 (error), 0 (no region), 1 (region) + * + * The mirrord will need perform recovery on regions of + * the mirror that are in the NOSYNC state. This + * function asks the log to tell the caller about the + * next region that this machine should recover. + * + * Do not confuse this function with 'in_sync()', one + * tells you if an area is synchronised, the other + * assigns recovery work. + */ + int (*get_resync_work)(struct dm_dirty_log *log, region_t *region); + + /* + * This notifies the log that the resync status of a region + * has changed. It also clears the region from the recovering + * list (if present). + */ + void (*set_region_sync)(struct dm_dirty_log *log, + region_t region, int in_sync); + + /* + * Returns the number of regions that are in sync. + */ + region_t (*get_sync_count)(struct dm_dirty_log *log); + + /* + * Support function for mirror status requests. + */ + int (*status)(struct dm_dirty_log *log, status_type_t status_type, + char *result, unsigned maxlen); +}; + +int dm_dirty_log_type_register(struct dm_dirty_log_type *type); +int dm_dirty_log_type_unregister(struct dm_dirty_log_type *type); + +/* + * Make sure you use these two functions, rather than calling + * type->constructor/destructor() directly. + */ +struct dm_dirty_log *dm_dirty_log_create(const char *type_name, + struct dm_target *ti, + unsigned argc, char **argv); +void dm_dirty_log_destroy(struct dm_dirty_log *log); + +#endif /* __KERNEL__ */ +#endif /* _LINUX_DM_DIRTY_LOG_H */ diff --git a/include/linux/dm-io.h b/include/linux/dm-io.h new file mode 100644 index 00000000000..b6bf17ee2f6 --- /dev/null +++ b/include/linux/dm-io.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2003 Sistina Software + * Copyright (C) 2004 - 2008 Red Hat, Inc. All rights reserved. + * + * Device-Mapper low-level I/O. + * + * This file is released under the GPL. + */ + +#ifndef _LINUX_DM_IO_H +#define _LINUX_DM_IO_H + +#ifdef __KERNEL__ + +#include <linux/types.h> + +struct dm_io_region { + struct block_device *bdev; + sector_t sector; + sector_t count; /* If this is zero the region is ignored. */ +}; + +struct page_list { + struct page_list *next; + struct page *page; +}; + +typedef void (*io_notify_fn)(unsigned long error, void *context); + +enum dm_io_mem_type { + DM_IO_PAGE_LIST,/* Page list */ + DM_IO_BVEC, /* Bio vector */ + DM_IO_VMA, /* Virtual memory area */ + DM_IO_KMEM, /* Kernel memory */ +}; + +struct dm_io_memory { + enum dm_io_mem_type type; + + union { + struct page_list *pl; + struct bio_vec *bvec; + void *vma; + void *addr; + } ptr; + + unsigned offset; +}; + +struct dm_io_notify { + io_notify_fn fn; /* Callback for asynchronous requests */ + void *context; /* Passed to callback */ +}; + +/* + * IO request structure + */ +struct dm_io_client; +struct dm_io_request { + int bi_rw; /* READ|WRITE - not READA */ + struct dm_io_memory mem; /* Memory to use for io */ + struct dm_io_notify notify; /* Synchronous if notify.fn is NULL */ + struct dm_io_client *client; /* Client memory handler */ +}; + +/* + * For async io calls, users can alternatively use the dm_io() function below + * and dm_io_client_create() to create private mempools for the client. + * + * Create/destroy may block. + */ +struct dm_io_client *dm_io_client_create(unsigned num_pages); +int dm_io_client_resize(unsigned num_pages, struct dm_io_client *client); +void dm_io_client_destroy(struct dm_io_client *client); + +/* + * IO interface using private per-client pools. + * Each bit in the optional 'sync_error_bits' bitset indicates whether an + * error occurred doing io to the corresponding region. + */ +int dm_io(struct dm_io_request *io_req, unsigned num_regions, + struct dm_io_region *region, unsigned long *sync_error_bits); + +#endif /* __KERNEL__ */ +#endif /* _LINUX_DM_IO_H */ diff --git a/include/linux/dm-kcopyd.h b/include/linux/dm-kcopyd.h new file mode 100644 index 00000000000..5db21631169 --- /dev/null +++ b/include/linux/dm-kcopyd.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2001 - 2003 Sistina Software + * Copyright (C) 2004 - 2008 Red Hat, Inc. All rights reserved. + * + * kcopyd provides a simple interface for copying an area of one + * block-device to one or more other block-devices, either synchronous + * or with an asynchronous completion notification. + * + * This file is released under the GPL. + */ + +#ifndef _LINUX_DM_KCOPYD_H +#define _LINUX_DM_KCOPYD_H + +#ifdef __KERNEL__ + +#include <linux/dm-io.h> + +/* FIXME: make this configurable */ +#define DM_KCOPYD_MAX_REGIONS 8 + +#define DM_KCOPYD_IGNORE_ERROR 1 + +/* + * To use kcopyd you must first create a dm_kcopyd_client object. + */ +struct dm_kcopyd_client; +int dm_kcopyd_client_create(unsigned num_pages, + struct dm_kcopyd_client **result); +void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc); + +/* + * Submit a copy job to kcopyd. This is built on top of the + * previous three fns. + * + * read_err is a boolean, + * write_err is a bitset, with 1 bit for each destination region + */ +typedef void (*dm_kcopyd_notify_fn)(int read_err, unsigned long write_err, + void *context); + +int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from, + unsigned num_dests, struct dm_io_region *dests, + unsigned flags, dm_kcopyd_notify_fn fn, void *context); + +#endif /* __KERNEL__ */ +#endif /* _LINUX_DM_KCOPYD_H */ diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h index c6a2353c4e6..402fb7a8d92 100644 --- a/include/linux/dvb/dmx.h +++ b/include/linux/dvb/dmx.h @@ -39,9 +39,10 @@ typedef enum DMX_OUT_DECODER, /* Streaming directly to decoder. */ DMX_OUT_TAP, /* Output going to a memory buffer */ /* (to be retrieved via the read command).*/ - DMX_OUT_TS_TAP /* Output multiplexed into a new TS */ + DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ /* (to be retrieved by reading from the */ /* logical DVR device). */ + DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ } dmx_output_t; diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index adcbb05b120..de8387b7ceb 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -43,7 +43,7 @@ struct fid { u32 parent_ino; u32 parent_gen; } i32; - __u32 raw[6]; + __u32 raw[0]; }; }; diff --git a/include/linux/fs.h b/include/linux/fs.h index cc2be2cf7d4..6556f2f967e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -973,6 +973,7 @@ extern int do_sync_mapping_range(struct address_space *mapping, loff_t offset, /* fs/locks.c */ extern void locks_init_lock(struct file_lock *); extern void locks_copy_lock(struct file_lock *, struct file_lock *); +extern void __locks_copy_lock(struct file_lock *, const struct file_lock *); extern void locks_remove_posix(struct file *, fl_owner_t); extern void locks_remove_flock(struct file *); extern void posix_test_lock(struct file *, struct file_lock *); diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index b979112f74e..32eb8bbe483 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -125,6 +125,7 @@ #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ #define I2C_HW_B_INTELFB 0x010021 /* intel framebuffer driver */ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ +#define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ /* --- PCF 8584 based algorithms */ #define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index f27d11ab418..529f301d937 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -465,13 +465,19 @@ enum ieee80211_eid { WLAN_EID_TS_DELAY = 43, WLAN_EID_TCLAS_PROCESSING = 44, WLAN_EID_QOS_CAPA = 46, - /* 802.11s */ - WLAN_EID_MESH_CONFIG = 36, /* Pending IEEE 802.11 ANA approval */ - WLAN_EID_MESH_ID = 37, /* Pending IEEE 802.11 ANA approval */ - WLAN_EID_PEER_LINK = 40, /* Pending IEEE 802.11 ANA approval */ - WLAN_EID_PREQ = 53, /* Pending IEEE 802.11 ANA approval */ - WLAN_EID_PREP = 54, /* Pending IEEE 802.11 ANA approval */ - WLAN_EID_PERR = 55, /* Pending IEEE 802.11 ANA approval */ + /* 802.11s + * + * All mesh EID numbers are pending IEEE 802.11 ANA approval. + * The numbers have been incremented from those suggested in + * 802.11s/D2.0 so that MESH_CONFIG does not conflict with + * EXT_SUPP_RATES. + */ + WLAN_EID_MESH_CONFIG = 51, + WLAN_EID_MESH_ID = 52, + WLAN_EID_PEER_LINK = 55, + WLAN_EID_PREQ = 68, + WLAN_EID_PREP = 69, + WLAN_EID_PERR = 70, /* 802.11h */ WLAN_EID_PWR_CONSTRAINT = 32, WLAN_EID_PWR_CAPABILITY = 33, diff --git a/include/linux/input.h b/include/linux/input.h index cae2c35d120..28a094fcfe2 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1025,10 +1025,6 @@ struct ff_effect { * @node: used to place the device onto input_dev_list */ struct input_dev { - /* private: */ - void *private; /* do not use */ - /* public: */ - const char *name; const char *phys; const char *uniq; @@ -1238,12 +1234,12 @@ static inline void input_put_device(struct input_dev *dev) static inline void *input_get_drvdata(struct input_dev *dev) { - return dev->private; + return dev_get_drvdata(&dev->dev); } static inline void input_set_drvdata(struct input_dev *dev, void *data) { - dev->private = data; + dev_set_drvdata(&dev->dev, data); } int __must_check input_register_device(struct input_dev *); diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h index 65c2d70853e..a3c984d780f 100644 --- a/include/linux/keyboard.h +++ b/include/linux/keyboard.h @@ -33,6 +33,7 @@ struct keyboard_notifier_param { struct vc_data *vc; /* VC on which the keyboard press was done */ int down; /* Pressure of the key? */ int shift; /* Current shift mask */ + int ledstate; /* Current led state */ unsigned int value; /* keycode, unicode value or keysym */ }; diff --git a/include/linux/leds.h b/include/linux/leds.h index b07e3d400bd..519df72e939 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -35,8 +35,11 @@ struct led_classdev { #define LED_SUSPENDED (1 << 0) /* Set LED brightness level */ + /* Must not sleep, use a workqueue if needed */ void (*brightness_set)(struct led_classdev *led_cdev, enum led_brightness brightness); + /* Get LED brightness level */ + enum led_brightness (*brightness_get)(struct led_classdev *led_cdev); /* Activate hardware accelerated blink */ int (*blink_set)(struct led_classdev *led_cdev, @@ -126,6 +129,9 @@ struct gpio_led { struct gpio_led_platform_data { int num_leds; struct gpio_led *leds; + int (*gpio_blink_set)(unsigned gpio, + unsigned long *delay_on, + unsigned long *delay_off); }; diff --git a/include/linux/libata.h b/include/linux/libata.h index 07ed56f7a76..395a523d8c3 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -847,7 +847,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap) return ap->ops == &ata_dummy_port_ops; } -extern void sata_print_link_status(struct ata_link *link); extern void ata_port_probe(struct ata_port *); extern int sata_set_spd(struct ata_link *link); extern int ata_std_prereset(struct ata_link *link, unsigned long deadline); diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 4babb2a129a..102d928f720 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -91,6 +91,7 @@ struct nlm_wait; */ #define NLMCLNT_OHSIZE ((__NEW_UTS_LEN) + 10u) struct nlm_rqst { + atomic_t a_count; unsigned int a_flags; /* initial RPC task flags */ struct nlm_host * a_host; /* host handle */ struct nlm_args a_args; /* arguments */ @@ -173,8 +174,10 @@ void nlmclnt_next_cookie(struct nlm_cookie *); /* * Host cache */ -struct nlm_host *nlmclnt_lookup_host(const struct sockaddr_in *, int, int, - const char *, unsigned int); +struct nlm_host *nlmclnt_lookup_host(const struct sockaddr_in *sin, + int proto, u32 version, + const char *hostname, + unsigned int hostname_len); struct nlm_host *nlmsvc_lookup_host(struct svc_rqst *, const char *, unsigned int); struct rpc_clnt * nlm_bind_host(struct nlm_host *); @@ -191,7 +194,7 @@ void nsm_release(struct nsm_handle *); * This is used in garbage collection and resource reclaim * A return value != 0 means destroy the lock/block/share */ -typedef int (*nlm_host_match_fn_t)(struct nlm_host *cur, struct nlm_host *ref); +typedef int (*nlm_host_match_fn_t)(void *cur, struct nlm_host *ref); /* * Server-side lock handling @@ -217,8 +220,13 @@ void nlmsvc_mark_resources(void); void nlmsvc_free_host_resources(struct nlm_host *); void nlmsvc_invalidate_all(void); -static __inline__ struct inode * -nlmsvc_file_inode(struct nlm_file *file) +/* + * Cluster failover support + */ +int nlmsvc_unlock_all_by_sb(struct super_block *sb); +int nlmsvc_unlock_all_by_ip(__be32 server_addr); + +static inline struct inode *nlmsvc_file_inode(struct nlm_file *file) { return file->f_file->f_path.dentry->d_inode; } @@ -226,8 +234,8 @@ nlmsvc_file_inode(struct nlm_file *file) /* * Compare two host addresses (needs modifying for ipv6) */ -static __inline__ int -nlm_cmp_addr(const struct sockaddr_in *sin1, const struct sockaddr_in *sin2) +static inline int nlm_cmp_addr(const struct sockaddr_in *sin1, + const struct sockaddr_in *sin2) { return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr; } @@ -236,8 +244,8 @@ nlm_cmp_addr(const struct sockaddr_in *sin1, const struct sockaddr_in *sin2) * Compare two NLM locks. * When the second lock is of type F_UNLCK, this acts like a wildcard. */ -static __inline__ int -nlm_compare_locks(const struct file_lock *fl1, const struct file_lock *fl2) +static inline int nlm_compare_locks(const struct file_lock *fl1, + const struct file_lock *fl2) { return fl1->fl_pid == fl2->fl_pid && fl1->fl_owner == fl2->fl_owner diff --git a/include/linux/lockd/sm_inter.h b/include/linux/lockd/sm_inter.h index 22a645828f2..5a5448bdb17 100644 --- a/include/linux/lockd/sm_inter.h +++ b/include/linux/lockd/sm_inter.h @@ -19,6 +19,7 @@ #define SM_NOTIFY 6 #define SM_MAXSTRLEN 1024 +#define SM_PRIV_SIZE 16 /* * Arguments for all calls to statd diff --git a/include/linux/meye.h b/include/linux/meye.h index 39fd9c8ddd4..12010ace1f0 100644 --- a/include/linux/meye.h +++ b/include/linux/meye.h @@ -58,7 +58,7 @@ struct meye_params { /* V4L2 private controls */ #define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE -#define V4L2_CID_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) +#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) #define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2) #define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3) #define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4) diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h index 6977780e548..85fd041d44a 100644 --- a/include/linux/mtd/inftl.h +++ b/include/linux/mtd/inftl.h @@ -57,6 +57,11 @@ extern char inftlmountrev[]; void INFTL_dumptables(struct INFTLrecord *s); void INFTL_dumpVUchains(struct INFTLrecord *s); +int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + #endif /* __KERNEL__ */ #endif /* __MTD_INFTL_H__ */ diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h index bcf2fb3fa4a..001eec50cac 100644 --- a/include/linux/mtd/nftl.h +++ b/include/linux/mtd/nftl.h @@ -43,6 +43,11 @@ struct NFTLrecord { int NFTL_mount(struct NFTLrecord *s); int NFTL_formatblock(struct NFTLrecord *s, int block); +int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + #ifndef NFTL_MAJOR #define NFTL_MAJOR 93 #endif diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index fd0a260e070..9aa2a9149b5 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -187,4 +187,7 @@ struct onenand_manufacturers { char *name; }; +int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops); + #endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h index 9667863bd7e..0e37ad07bce 100644 --- a/include/linux/mtd/plat-ram.h +++ b/include/linux/mtd/plat-ram.h @@ -21,8 +21,9 @@ #define PLATRAM_RW (1) struct platdata_mtd_ram { - char *mapname; - char **probes; + const char *mapname; + const char **map_probes; + const char **probes; struct mtd_partition *partitions; int nr_partitions; int bankwidth; diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h index 7f11fa58920..539f3b550ea 100644 --- a/include/linux/nfs3.h +++ b/include/linux/nfs3.h @@ -96,7 +96,7 @@ struct nfs3_fh { #define MOUNTPROC3_UMNTALL 4 -#if defined(__KERNEL__) || defined(NFS_NEED_KERNEL_TYPES) +#if defined(__KERNEL__) /* Number of 32bit words in post_op_attr */ #define NFS3_POST_OP_ATTR_WORDS 22 diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index f4a0e4c218d..27d6a8d98ce 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -430,7 +430,6 @@ extern void nfs_unregister_sysctl(void); /* * linux/fs/nfs/namespace.c */ -extern struct list_head nfs_automount_list; extern const struct inode_operations nfs_mountpoint_inode_operations; extern const struct inode_operations nfs_referral_inode_operations; extern int nfs_mountpoint_expiry_timeout; @@ -466,9 +465,9 @@ extern int nfs_wb_page(struct inode *inode, struct page* page); extern int nfs_wb_page_cancel(struct inode *inode, struct page* page); #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4) extern int nfs_commit_inode(struct inode *, int); -extern struct nfs_write_data *nfs_commit_alloc(void); +extern struct nfs_write_data *nfs_commitdata_alloc(void); extern void nfs_commit_free(struct nfs_write_data *wdata); -extern void nfs_commit_release(void *wdata); +extern void nfs_commitdata_release(void *wdata); #else static inline int nfs_commit_inode(struct inode *inode, int how) diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 3423c6761bf..c9beacd16c0 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -32,6 +32,8 @@ struct nfs_client { const struct nfs_rpc_ops *rpc_ops; /* NFS protocol vector */ int cl_proto; /* Network transport protocol */ + struct rpc_cred *cl_machine_cred; + #ifdef CONFIG_NFS_V4 u64 cl_clientid; /* constant */ nfs4_verifier cl_confirm; @@ -93,6 +95,7 @@ struct nfs_server { unsigned int wpages; /* write size (in pages) */ unsigned int wtmult; /* server disk block size */ unsigned int dtsize; /* readdir size */ + unsigned short port; /* "port=" setting */ unsigned int bsize; /* server block size */ unsigned int acregmin; /* attr cache timeouts */ unsigned int acregmax; @@ -117,6 +120,13 @@ struct nfs_server { atomic_t active; /* Keep trace of any activity to this server */ wait_queue_head_t active_wq; /* Wait for any activity to stop */ + + /* mountd-related mount options */ + struct sockaddr_storage mountd_address; + size_t mountd_addrlen; + u32 mountd_version; + unsigned short mountd_port; + unsigned short mountd_protocol; }; /* Server capabilities */ diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index f301d0b8bab..24263bb8e0b 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -140,6 +140,7 @@ struct nfs_openres { __u32 rflags; struct nfs_fattr * f_attr; struct nfs_fattr * dir_attr; + struct nfs_seqid * seqid; const struct nfs_server *server; int delegation_type; nfs4_stateid delegation; @@ -159,6 +160,7 @@ struct nfs_open_confirmargs { struct nfs_open_confirmres { nfs4_stateid stateid; + struct nfs_seqid * seqid; }; /* @@ -175,6 +177,7 @@ struct nfs_closeargs { struct nfs_closeres { nfs4_stateid stateid; struct nfs_fattr * fattr; + struct nfs_seqid * seqid; const struct nfs_server *server; }; /* @@ -199,7 +202,9 @@ struct nfs_lock_args { }; struct nfs_lock_res { - nfs4_stateid stateid; + nfs4_stateid stateid; + struct nfs_seqid * lock_seqid; + struct nfs_seqid * open_seqid; }; struct nfs_locku_args { @@ -210,7 +215,8 @@ struct nfs_locku_args { }; struct nfs_locku_res { - nfs4_stateid stateid; + nfs4_stateid stateid; + struct nfs_seqid * seqid; }; struct nfs_lockt_args { diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild index e726fc3a437..fc972048e57 100644 --- a/include/linux/nfsd/Kbuild +++ b/include/linux/nfsd/Kbuild @@ -1,6 +1,6 @@ unifdef-y += const.h +unifdef-y += debug.h unifdef-y += export.h +unifdef-y += nfsfh.h unifdef-y += stats.h unifdef-y += syscall.h -unifdef-y += nfsfh.h -unifdef-y += debug.h diff --git a/include/linux/nfsd/cache.h b/include/linux/nfsd/cache.h index 7b5d784cc85..04b355c801d 100644 --- a/include/linux/nfsd/cache.h +++ b/include/linux/nfsd/cache.h @@ -10,7 +10,6 @@ #ifndef NFSCACHE_H #define NFSCACHE_H -#ifdef __KERNEL__ #include <linux/in.h> #include <linux/uio.h> @@ -77,5 +76,4 @@ void nfsd_reply_cache_shutdown(void); int nfsd_cache_lookup(struct svc_rqst *, int); void nfsd_cache_update(struct svc_rqst *, int, __be32 *); -#endif /* __KERNEL__ */ #endif /* NFSCACHE_H */ diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 8caf4c4f64e..41d30c9c9de 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -27,7 +27,6 @@ #define NFSD_VERSION "0.5" #define NFSD_SUPPORTED_MINOR_VERSION 0 -#ifdef __KERNEL__ /* * Special flags for nfsd_permission. These must be different from MAY_READ, * MAY_WRITE, and MAY_EXEC. @@ -56,12 +55,20 @@ extern struct svc_program nfsd_program; extern struct svc_version nfsd_version2, nfsd_version3, nfsd_version4; extern struct svc_serv *nfsd_serv; + +extern struct seq_operations nfs_exports_op; + /* * Function prototypes. */ int nfsd_svc(unsigned short port, int nrservs); int nfsd_dispatch(struct svc_rqst *rqstp, __be32 *statp); +int nfsd_nrthreads(void); +int nfsd_nrpools(void); +int nfsd_get_nrthreads(int n, int *); +int nfsd_set_nrthreads(int n, int *); + /* nfsd/vfs.c */ int fh_lock_parent(struct svc_fh *, struct dentry *); int nfsd_racache_init(int); @@ -322,10 +329,8 @@ extern struct timeval nfssvc_boot; (FATTR4_WORD0_SIZE | FATTR4_WORD0_ACL ) #define NFSD_WRITEABLE_ATTRS_WORD1 \ (FATTR4_WORD1_MODE | FATTR4_WORD1_OWNER | FATTR4_WORD1_OWNER_GROUP \ - | FATTR4_WORD1_TIME_ACCESS_SET | FATTR4_WORD1_TIME_METADATA | FATTR4_WORD1_TIME_MODIFY_SET) + | FATTR4_WORD1_TIME_ACCESS_SET | FATTR4_WORD1_TIME_MODIFY_SET) #endif /* CONFIG_NFSD_V4 */ -#endif /* __KERNEL__ */ - #endif /* LINUX_NFSD_NFSD_H */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 779cbcd65f6..02df20f085f 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -379,6 +379,18 @@ struct phy_driver { }; #define to_phy_driver(d) container_of(d, struct phy_driver, driver) +#define PHY_ANY_ID "MATCH ANY PHY" +#define PHY_ANY_UID 0xffffffff + +/* A Structure for boards to register fixups with the PHY Lib */ +struct phy_fixup { + struct list_head list; + char bus_id[BUS_ID_SIZE]; + u32 phy_uid; + u32 phy_uid_mask; + int (*run)(struct phy_device *phydev); +}; + int phy_read(struct phy_device *phydev, u16 regnum); int phy_write(struct phy_device *phydev, u16 regnum, u16 val); int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); @@ -386,8 +398,8 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); struct phy_device * phy_attach(struct net_device *dev, - const char *phy_id, u32 flags, phy_interface_t interface); -struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, + const char *bus_id, u32 flags, phy_interface_t interface); +struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, void (*handler)(struct net_device *), u32 flags, phy_interface_t interface); void phy_disconnect(struct phy_device *phydev); @@ -427,5 +439,13 @@ void phy_print_status(struct phy_device *phydev); struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id); void phy_device_free(struct phy_device *phydev); +int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)); +int phy_register_fixup_for_id(const char *bus_id, + int (*run)(struct phy_device *)); +int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)); +int phy_scan_fixups(struct phy_device *phydev); + extern struct bus_type mdio_bus_type; #endif /* __PHY_H */ diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index b9e17407900..44c81c74453 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -740,13 +740,13 @@ extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change); extern void rtnl_lock(void); extern void rtnl_unlock(void); extern int rtnl_trylock(void); +extern int rtnl_is_locked(void); extern void rtnetlink_init(void); extern void __rtnl_unlock(void); #define ASSERT_RTNL() do { \ - if (unlikely(rtnl_trylock())) { \ - rtnl_unlock(); \ + if (unlikely(!rtnl_is_locked())) { \ printk(KERN_ERR "RTNL: assertion failed at %s (%d)\n", \ __FILE__, __LINE__); \ dump_stack(); \ diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index 26e4925bc35..632205ccc25 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -85,23 +85,29 @@ static inline int write_tryseqlock(seqlock_t *sl) /* Start of read calculation -- fetch last complete writer token */ static __always_inline unsigned read_seqbegin(const seqlock_t *sl) { - unsigned ret = sl->sequence; + unsigned ret; + +repeat: + ret = sl->sequence; smp_rmb(); + if (unlikely(ret & 1)) { + cpu_relax(); + goto repeat; + } + return ret; } -/* Test if reader processed invalid data. - * If initial values is odd, - * then writer had already started when section was entered - * If sequence value changed - * then writer changed data while in section - * - * Using xor saves one conditional branch. +/* + * Test if reader processed invalid data. + * + * If sequence value changed then writer changed data while in section. */ -static __always_inline int read_seqretry(const seqlock_t *sl, unsigned iv) +static __always_inline int read_seqretry(const seqlock_t *sl, unsigned start) { smp_rmb(); - return (iv & 1) | (sl->sequence ^ iv); + + return (sl->sequence != start); } @@ -122,20 +128,26 @@ typedef struct seqcount { /* Start of read using pointer to a sequence counter only. */ static inline unsigned read_seqcount_begin(const seqcount_t *s) { - unsigned ret = s->sequence; + unsigned ret; + +repeat: + ret = s->sequence; smp_rmb(); + if (unlikely(ret & 1)) { + cpu_relax(); + goto repeat; + } return ret; } -/* Test if reader processed invalid data. - * Equivalent to: iv is odd or sequence number has changed. - * (iv & 1) || (*s != iv) - * Using xor saves one conditional branch. +/* + * Test if reader processed invalid data because sequence number has changed. */ -static inline int read_seqcount_retry(const seqcount_t *s, unsigned iv) +static inline int read_seqcount_retry(const seqcount_t *s, unsigned start) { smp_rmb(); - return (iv & 1) | (s->sequence ^ iv); + + return s->sequence != start; } diff --git a/include/linux/serio.h b/include/linux/serio.h index 9f382501467..95674d97dab 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -211,5 +211,6 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_TOUCHWIN 0x33 #define SERIO_TAOSEVM 0x34 #define SERIO_FUJITSU 0x35 +#define SERIO_ZHENHUA 0x36 #endif diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 334d3141162..daf744017a3 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -14,7 +14,8 @@ enum ads7846_filter { struct ads7846_platform_data { u16 model; /* 7843, 7845, 7846. */ u16 vref_delay_usecs; /* 0 for external vref; etc */ - int keep_vref_on:1; /* set to keep vref on for differential + u16 vref_mv; /* external vref value, milliVolts */ + bool keep_vref_on; /* set to keep vref on for differential * measurements as well */ /* Settling time of the analog signals; a function of Vcc and the diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h index 7a69ca3beba..3f632182d8e 100644 --- a/include/linux/sunrpc/auth.h +++ b/include/linux/sunrpc/auth.h @@ -26,6 +26,7 @@ struct auth_cred { uid_t uid; gid_t gid; struct group_info *group_info; + unsigned char machine_cred : 1; }; /* @@ -59,8 +60,8 @@ struct rpc_cred { /* * Client authentication handle */ -#define RPC_CREDCACHE_NR 8 -#define RPC_CREDCACHE_MASK (RPC_CREDCACHE_NR - 1) +#define RPC_CREDCACHE_HASHBITS 4 +#define RPC_CREDCACHE_NR (1 << RPC_CREDCACHE_HASHBITS) struct rpc_cred_cache { struct hlist_head hashtable[RPC_CREDCACHE_NR]; spinlock_t lock; @@ -89,7 +90,6 @@ struct rpc_auth { /* Flags for rpcauth_lookupcred() */ #define RPCAUTH_LOOKUP_NEW 0x01 /* Accept an uninitialised cred */ -#define RPCAUTH_LOOKUP_ROOTCREDS 0x02 /* This really ought to go! */ /* * Client authentication ops @@ -97,9 +97,7 @@ struct rpc_auth { struct rpc_authops { struct module *owner; rpc_authflavor_t au_flavor; /* flavor (RPC_AUTH_*) */ -#ifdef RPC_DEBUG char * au_name; -#endif struct rpc_auth * (*create)(struct rpc_clnt *, rpc_authflavor_t); void (*destroy)(struct rpc_auth *); @@ -113,6 +111,7 @@ struct rpc_credops { void (*crdestroy)(struct rpc_cred *); int (*crmatch)(struct auth_cred *, struct rpc_cred *, int); + void (*crbind)(struct rpc_task *, struct rpc_cred *); __be32 * (*crmarshal)(struct rpc_task *, __be32 *); int (*crrefresh)(struct rpc_task *); __be32 * (*crvalidate)(struct rpc_task *, __be32 *); @@ -126,9 +125,13 @@ extern const struct rpc_authops authunix_ops; extern const struct rpc_authops authnull_ops; void __init rpc_init_authunix(void); +void __init rpc_init_generic_auth(void); void __init rpcauth_init_module(void); void __exit rpcauth_remove_module(void); +void __exit rpc_destroy_generic_auth(void); +struct rpc_cred * rpc_lookup_cred(void); +struct rpc_cred * rpc_lookup_machine_cred(void); int rpcauth_register(const struct rpc_authops *); int rpcauth_unregister(const struct rpc_authops *); struct rpc_auth * rpcauth_create(rpc_authflavor_t, struct rpc_clnt *); @@ -136,8 +139,8 @@ void rpcauth_release(struct rpc_auth *); struct rpc_cred * rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred *, int); void rpcauth_init_cred(struct rpc_cred *, const struct auth_cred *, struct rpc_auth *, const struct rpc_credops *); struct rpc_cred * rpcauth_lookupcred(struct rpc_auth *, int); -struct rpc_cred * rpcauth_bindcred(struct rpc_task *); -void rpcauth_holdcred(struct rpc_task *); +void rpcauth_bindcred(struct rpc_task *, struct rpc_cred *, int); +void rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *); void put_rpccred(struct rpc_cred *); void rpcauth_unbindcred(struct rpc_task *); __be32 * rpcauth_marshcred(struct rpc_task *, __be32 *); diff --git a/include/linux/sunrpc/auth_gss.h b/include/linux/sunrpc/auth_gss.h index 67658e17a37..fec6899bf35 100644 --- a/include/linux/sunrpc/auth_gss.h +++ b/include/linux/sunrpc/auth_gss.h @@ -84,6 +84,7 @@ struct gss_cred { enum rpc_gss_svc gc_service; struct gss_cl_ctx *gc_ctx; struct gss_upcall_msg *gc_upcall; + unsigned char gc_machine_cred : 1; }; #endif /* __KERNEL__ */ diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 03547d6abee..2d8b211b932 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -120,7 +120,6 @@ struct cache_deferred_req { struct list_head hash; /* on hash chain */ struct list_head recent; /* on fifo */ struct cache_head *item; /* cache item we wait on */ - time_t recv_time; void *owner; /* we might need to discard all defered requests * owned by someone */ void (*revisit)(struct cache_deferred_req *req, diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 129a86e25d2..6fff7f82ef1 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -127,11 +127,12 @@ int rpcb_getport_sync(struct sockaddr_in *, u32, u32, int); void rpcb_getport_async(struct rpc_task *); void rpc_call_start(struct rpc_task *); -int rpc_call_async(struct rpc_clnt *clnt, struct rpc_message *msg, - int flags, const struct rpc_call_ops *tk_ops, +int rpc_call_async(struct rpc_clnt *clnt, + const struct rpc_message *msg, int flags, + const struct rpc_call_ops *tk_ops, void *calldata); -int rpc_call_sync(struct rpc_clnt *clnt, struct rpc_message *msg, - int flags); +int rpc_call_sync(struct rpc_clnt *clnt, + const struct rpc_message *msg, int flags); struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred, int flags); void rpc_restart_call(struct rpc_task *); diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h index 5a4b1e0206e..a10f1fb0bf7 100644 --- a/include/linux/sunrpc/gss_krb5.h +++ b/include/linux/sunrpc/gss_krb5.h @@ -70,8 +70,6 @@ enum seal_alg { SEAL_ALG_DES3KD = 0x0002 }; -#define KRB5_CKSUM_LENGTH 8 - #define CKSUMTYPE_CRC32 0x0001 #define CKSUMTYPE_RSA_MD4 0x0002 #define CKSUMTYPE_RSA_MD4_DES 0x0003 @@ -150,9 +148,9 @@ gss_decrypt_xdr_buf(struct crypto_blkcipher *tfm, struct xdr_buf *inbuf, s32 krb5_make_seq_num(struct crypto_blkcipher *key, int direction, - s32 seqnum, unsigned char *cksum, unsigned char *buf); + u32 seqnum, unsigned char *cksum, unsigned char *buf); s32 krb5_get_seq_num(struct crypto_blkcipher *key, unsigned char *cksum, - unsigned char *buf, int *direction, s32 * seqnum); + unsigned char *buf, int *direction, u32 *seqnum); diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index f689f02e679..d1a5c8c1a0f 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -11,7 +11,6 @@ #include <linux/timer.h> #include <linux/sunrpc/types.h> -#include <linux/rcupdate.h> #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/workqueue.h> @@ -33,7 +32,8 @@ struct rpc_wait_queue; struct rpc_wait { struct list_head list; /* wait queue links */ struct list_head links; /* Links to related tasks */ - struct rpc_wait_queue * rpc_waitq; /* RPC wait queue we're on */ + struct list_head timer_list; /* Timer list */ + unsigned long expires; }; /* @@ -57,33 +57,25 @@ struct rpc_task { __u8 tk_cred_retry; /* - * timeout_fn to be executed by timer bottom half * callback to be executed after waking up * action next procedure for async tasks * tk_ops caller callbacks */ - void (*tk_timeout_fn)(struct rpc_task *); void (*tk_callback)(struct rpc_task *); void (*tk_action)(struct rpc_task *); const struct rpc_call_ops *tk_ops; void * tk_calldata; - /* - * tk_timer is used for async processing by the RPC scheduling - * primitives. You should not access this directly unless - * you have a pathological interest in kernel oopses. - */ - struct timer_list tk_timer; /* kernel timer */ unsigned long tk_timeout; /* timeout for rpc_sleep() */ unsigned short tk_flags; /* misc flags */ unsigned long tk_runstate; /* Task run status */ struct workqueue_struct *tk_workqueue; /* Normally rpciod, but could * be any workqueue */ + struct rpc_wait_queue *tk_waitqueue; /* RPC wait queue we're on */ union { struct work_struct tk_work; /* Async task work queue */ struct rpc_wait tk_wait; /* RPC wait */ - struct rcu_head tk_rcu; /* for task deletion */ } u; unsigned short tk_timeouts; /* maj timeouts */ @@ -123,6 +115,7 @@ struct rpc_task_setup { const struct rpc_message *rpc_message; const struct rpc_call_ops *callback_ops; void *callback_data; + struct workqueue_struct *workqueue; unsigned short flags; signed char priority; }; @@ -147,9 +140,7 @@ struct rpc_task_setup { #define RPC_TASK_RUNNING 0 #define RPC_TASK_QUEUED 1 -#define RPC_TASK_WAKEUP 2 -#define RPC_TASK_HAS_TIMER 3 -#define RPC_TASK_ACTIVE 4 +#define RPC_TASK_ACTIVE 2 #define RPC_IS_RUNNING(t) test_bit(RPC_TASK_RUNNING, &(t)->tk_runstate) #define rpc_set_running(t) set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate) @@ -171,15 +162,6 @@ struct rpc_task_setup { smp_mb__after_clear_bit(); \ } while (0) -#define rpc_start_wakeup(t) \ - (test_and_set_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate) == 0) -#define rpc_finish_wakeup(t) \ - do { \ - smp_mb__before_clear_bit(); \ - clear_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate); \ - smp_mb__after_clear_bit(); \ - } while (0) - #define RPC_IS_ACTIVATED(t) test_bit(RPC_TASK_ACTIVE, &(t)->tk_runstate) /* @@ -192,6 +174,12 @@ struct rpc_task_setup { #define RPC_PRIORITY_HIGH (1) #define RPC_NR_PRIORITY (1 + RPC_PRIORITY_HIGH - RPC_PRIORITY_LOW) +struct rpc_timer { + struct timer_list timer; + struct list_head list; + unsigned long expires; +}; + /* * RPC synchronization objects */ @@ -204,6 +192,7 @@ struct rpc_wait_queue { unsigned char count; /* # task groups remaining serviced so far */ unsigned char nr; /* # tasks remaining for cookie */ unsigned short qlen; /* total # tasks waiting in queue */ + struct rpc_timer timer_list; #ifdef RPC_DEBUG const char * name; #endif @@ -229,9 +218,11 @@ void rpc_killall_tasks(struct rpc_clnt *); void rpc_execute(struct rpc_task *); void rpc_init_priority_wait_queue(struct rpc_wait_queue *, const char *); void rpc_init_wait_queue(struct rpc_wait_queue *, const char *); +void rpc_destroy_wait_queue(struct rpc_wait_queue *); void rpc_sleep_on(struct rpc_wait_queue *, struct rpc_task *, - rpc_action action, rpc_action timer); -void rpc_wake_up_task(struct rpc_task *); + rpc_action action); +void rpc_wake_up_queued_task(struct rpc_wait_queue *, + struct rpc_task *); void rpc_wake_up(struct rpc_wait_queue *); struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *); void rpc_wake_up_status(struct rpc_wait_queue *, int); diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 64c97552964..4b54c5fdcfd 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -386,7 +386,6 @@ struct svc_serv * svc_create(struct svc_program *, unsigned int, void (*shutdown)(struct svc_serv*)); struct svc_rqst *svc_prepare_thread(struct svc_serv *serv, struct svc_pool *pool); -int svc_create_thread(svc_thread_fn, struct svc_serv *); void svc_exit_thread(struct svc_rqst *); struct svc_serv * svc_create_pooled(struct svc_program *, unsigned int, void (*shutdown)(struct svc_serv*), diff --git a/include/linux/sunrpc/svcauth.h b/include/linux/sunrpc/svcauth.h index 22e1ef8e200..d39dbdc7b10 100644 --- a/include/linux/sunrpc/svcauth.h +++ b/include/linux/sunrpc/svcauth.h @@ -24,6 +24,7 @@ struct svc_cred { }; struct svc_rqst; /* forward decl */ +struct in6_addr; /* Authentication is done in the context of a domain. * @@ -120,10 +121,10 @@ extern void svc_auth_unregister(rpc_authflavor_t flavor); extern struct auth_domain *unix_domain_find(char *name); extern void auth_domain_put(struct auth_domain *item); -extern int auth_unix_add_addr(struct in_addr addr, struct auth_domain *dom); +extern int auth_unix_add_addr(struct in6_addr *addr, struct auth_domain *dom); extern struct auth_domain *auth_domain_lookup(char *name, struct auth_domain *new); extern struct auth_domain *auth_domain_find(char *name); -extern struct auth_domain *auth_unix_lookup(struct in_addr addr); +extern struct auth_domain *auth_unix_lookup(struct in6_addr *addr); extern int auth_unix_forget_old(struct auth_domain *dom); extern void svcauth_unix_purge(void); extern void svcauth_unix_info_release(void *); diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index 206f092ad4c..8cff696dedf 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -26,8 +26,8 @@ struct svc_sock { void (*sk_owspace)(struct sock *); /* private TCP part */ - int sk_reclen; /* length of record */ - int sk_tcplen; /* current read length */ + u32 sk_reclen; /* length of record */ + u32 sk_tcplen; /* current read length */ }; /* diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index b3ff9a815e6..4d80a118d53 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -86,6 +86,10 @@ struct rpc_rqst { unsigned long rq_majortimeo; /* major timeout alarm */ unsigned long rq_timeout; /* Current timeout value */ unsigned int rq_retries; /* # of retries */ + unsigned int rq_connect_cookie; + /* A cookie used to track the + state of the transport + connection */ /* * Partial send handling @@ -152,6 +156,9 @@ struct rpc_xprt { unsigned long connect_timeout, bind_timeout, reestablish_timeout; + unsigned int connect_cookie; /* A cookie that gets bumped + every time the transport + is reconnected */ /* * Disconnection of idle transports @@ -232,7 +239,7 @@ int xprt_unregister_transport(struct xprt_class *type); void xprt_set_retrans_timeout_def(struct rpc_task *task); void xprt_set_retrans_timeout_rtt(struct rpc_task *task); void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status); -void xprt_wait_for_buffer_space(struct rpc_task *task); +void xprt_wait_for_buffer_space(struct rpc_task *task, rpc_action action); void xprt_write_space(struct rpc_xprt *xprt); void xprt_update_rtt(struct rpc_task *task); void xprt_adjust_cwnd(struct rpc_task *task, int result); @@ -241,6 +248,7 @@ void xprt_complete_rqst(struct rpc_task *task, int copied); void xprt_release_rqst_cong(struct rpc_task *task); void xprt_disconnect_done(struct rpc_xprt *xprt); void xprt_force_disconnect(struct rpc_xprt *xprt); +void xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie); /* * Reserved bit positions in xprt->state diff --git a/include/linux/usb.h b/include/linux/usb.h index 583e0481dfa..c08689ea9b4 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -23,6 +23,7 @@ struct usb_device; struct usb_driver; +struct wusb_dev; /*-------------------------------------------------------------------------*/ @@ -341,103 +342,146 @@ struct usb_bus { struct usb_tt; -/* +/** * struct usb_device - kernel's representation of a USB device - * - * FIXME: Write the kerneldoc! - * + * @devnum: device number; address on a USB bus + * @devpath: device ID string for use in messages (e.g., /port/...) + * @state: device state: configured, not attached, etc. + * @speed: device speed: high/full/low (or error) + * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub + * @ttport: device port on that tt hub + * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints + * @parent: our hub, unless we're the root + * @bus: bus we're part of + * @ep0: endpoint 0 data (default control pipe) + * @dev: generic device interface + * @descriptor: USB device descriptor + * @config: all of the device's configs + * @actconfig: the active configuration + * @ep_in: array of IN endpoints + * @ep_out: array of OUT endpoints + * @rawdescriptors: raw descriptors for each config + * @bus_mA: Current available from the bus + * @portnum: parent port number (origin 1) + * @level: number of USB hub ancestors + * @can_submit: URBs may be submitted + * @discon_suspended: disconnected while suspended + * @persist_enabled: USB_PERSIST enabled for this device + * @have_langid: whether string_langid is valid + * @authorized: policy has said we can use it; + * (user space) policy determines if we authorize this device to be + * used or not. By default, wired USB devices are authorized. + * WUSB devices are not, until we authorize them from user space. + * FIXME -- complete doc + * @authenticated: Crypto authentication passed + * @wusb: device is Wireless USB + * @string_langid: language ID for strings + * @product: iProduct string, if present (static) + * @manufacturer: iManufacturer string, if present (static) + * @serial: iSerialNumber string, if present (static) + * @filelist: usbfs files that are open to this device + * @usb_classdev: USB class device that was created for usbfs device + * access from userspace + * @usbfs_dentry: usbfs dentry entry for the device + * @maxchild: number of ports if hub + * @children: child devices - USB devices that are attached to this hub + * @pm_usage_cnt: usage counter for autosuspend + * @quirks: quirks of the whole device + * @urbnum: number of URBs submitted for the whole device + * @active_duration: total time device is not suspended + * @autosuspend: for delayed autosuspends + * @pm_mutex: protects PM operations + * @last_busy: time of last use + * @autosuspend_delay: in jiffies + * @connect_time: time device was first connected + * @auto_pm: autosuspend/resume in progress + * @do_remote_wakeup: remote wakeup should be enabled + * @reset_resume: needs reset instead of resume + * @autosuspend_disabled: autosuspend disabled by the user + * @autoresume_disabled: autoresume disabled by the user + * @skip_sys_resume: skip the next system resume + * + * Notes: * Usbcore drivers should not set usbdev->state directly. Instead use * usb_set_device_state(). - * - * @authorized: (user space) policy determines if we authorize this - * device to be used or not. By default, wired USB - * devices are authorized. WUSB devices are not, until we - * authorize them from user space. FIXME -- complete doc */ struct usb_device { - int devnum; /* Address on USB bus */ - char devpath [16]; /* Use in messages: /port/port/... */ - enum usb_device_state state; /* configured, not attached, etc */ - enum usb_device_speed speed; /* high/full/low (or error) */ + int devnum; + char devpath [16]; + enum usb_device_state state; + enum usb_device_speed speed; - struct usb_tt *tt; /* low/full speed dev, highspeed hub */ - int ttport; /* device port on that tt hub */ + struct usb_tt *tt; + int ttport; - unsigned int toggle[2]; /* one bit for each endpoint - * ([0] = IN, [1] = OUT) */ + unsigned int toggle[2]; - struct usb_device *parent; /* our hub, unless we're the root */ - struct usb_bus *bus; /* Bus we're part of */ + struct usb_device *parent; + struct usb_bus *bus; struct usb_host_endpoint ep0; - struct device dev; /* Generic device interface */ + struct device dev; - struct usb_device_descriptor descriptor;/* Descriptor */ - struct usb_host_config *config; /* All of the configs */ + struct usb_device_descriptor descriptor; + struct usb_host_config *config; - struct usb_host_config *actconfig;/* the active configuration */ + struct usb_host_config *actconfig; struct usb_host_endpoint *ep_in[16]; struct usb_host_endpoint *ep_out[16]; - char **rawdescriptors; /* Raw descriptors for each config */ + char **rawdescriptors; - unsigned short bus_mA; /* Current available from the bus */ - u8 portnum; /* Parent port number (origin 1) */ - u8 level; /* Number of USB hub ancestors */ + unsigned short bus_mA; + u8 portnum; + u8 level; - unsigned can_submit:1; /* URBs may be submitted */ - unsigned discon_suspended:1; /* Disconnected while suspended */ - unsigned have_langid:1; /* whether string_langid is valid */ - unsigned authorized:1; /* Policy has said we can use it */ - unsigned wusb:1; /* Device is Wireless USB */ - int string_langid; /* language ID for strings */ + unsigned can_submit:1; + unsigned discon_suspended:1; + unsigned persist_enabled:1; + unsigned have_langid:1; + unsigned authorized:1; + unsigned authenticated:1; + unsigned wusb:1; + int string_langid; /* static strings from the device */ - char *product; /* iProduct string, if present */ - char *manufacturer; /* iManufacturer string, if present */ - char *serial; /* iSerialNumber string, if present */ + char *product; + char *manufacturer; + char *serial; struct list_head filelist; #ifdef CONFIG_USB_DEVICE_CLASS struct device *usb_classdev; #endif #ifdef CONFIG_USB_DEVICEFS - struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ + struct dentry *usbfs_dentry; #endif - /* - * Child devices - these can be either new devices - * (if this is a hub device), or different instances - * of this same device. - * - * Each instance needs its own set of data structures. - */ - int maxchild; /* Number of ports if hub */ + int maxchild; struct usb_device *children[USB_MAXCHILDREN]; - int pm_usage_cnt; /* usage counter for autosuspend */ - u32 quirks; /* quirks of the whole device */ - atomic_t urbnum; /* number of URBs submitted for - the whole device */ + int pm_usage_cnt; + u32 quirks; + atomic_t urbnum; - unsigned long active_duration; /* total time device is not suspended */ + unsigned long active_duration; #ifdef CONFIG_PM - struct delayed_work autosuspend; /* for delayed autosuspends */ - struct mutex pm_mutex; /* protects PM operations */ - - unsigned long last_busy; /* time of last use */ - int autosuspend_delay; /* in jiffies */ - unsigned long connect_time; /* time device was first connected */ - - unsigned auto_pm:1; /* autosuspend/resume in progress */ - unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */ - unsigned reset_resume:1; /* needs reset instead of resume */ - unsigned persist_enabled:1; /* USB_PERSIST enabled for this dev */ - unsigned autosuspend_disabled:1; /* autosuspend and autoresume */ - unsigned autoresume_disabled:1; /* disabled by the user */ - unsigned skip_sys_resume:1; /* skip the next system resume */ + struct delayed_work autosuspend; + struct mutex pm_mutex; + + unsigned long last_busy; + int autosuspend_delay; + unsigned long connect_time; + + unsigned auto_pm:1; + unsigned do_remote_wakeup:1; + unsigned reset_resume:1; + unsigned autosuspend_disabled:1; + unsigned autoresume_disabled:1; + unsigned skip_sys_resume:1; #endif + struct wusb_dev *wusb_dev; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) @@ -898,10 +942,11 @@ struct usbdrv_wrap { * and should normally be the same as the module name. * @probe: Called to see if the driver is willing to manage a particular * interface on a device. If it is, probe returns zero and uses - * dev_set_drvdata() to associate driver-specific data with the + * usb_set_intfdata() to associate driver-specific data with the * interface. It may also use usb_set_interface() to specify the * appropriate altsetting. If unwilling to manage the interface, - * return a negative errno value. + * return -ENODEV, if genuine IO errors occured, an appropriate + * negative errno value. * @disconnect: Called when the interface is no longer accessible, usually * because its device has been (or is being) disconnected or the * driver module is being unloaded. @@ -916,10 +961,7 @@ struct usbdrv_wrap { * @pre_reset: Called by usb_reset_composite_device() when the device * is about to be reset. * @post_reset: Called by usb_reset_composite_device() after the device - * has been reset, or in lieu of @resume following a reset-resume - * (i.e., the device is reset instead of being resumed, as might - * happen if power was lost). The second argument tells which is - * the reason. + * has been reset * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set * or your driver's probe function will never get called. @@ -1411,6 +1453,7 @@ extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); +extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor); extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor); extern void usb_unanchor_urb(struct urb *urb); extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, @@ -1661,13 +1704,12 @@ extern void usb_unregister_notify(struct notifier_block *nb); #define dbg(format, arg...) do {} while (0) #endif -#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ - __FILE__ , ## arg) -#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , \ - __FILE__ , ## arg) -#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , \ - __FILE__ , ## arg) - +#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ + format "\n" , ## arg) +#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \ + format "\n" , ## arg) +#define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \ + format "\n" , ## arg) #endif /* __KERNEL__ */ diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index 2dfeef16b22..8cb025fef63 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -50,4 +50,4 @@ struct usb_ac_header_descriptor_##n { \ __u8 baInterfaceNr[n]; \ } __attribute__ ((packed)) -#endif +#endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 94ee4ecf056..71e52f2f6a3 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -6,6 +6,9 @@ * firmware based USB peripherals. */ +#ifndef __LINUX_USB_CDC_H +#define __LINUX_USB_CDC_H + #define USB_CDC_SUBCLASS_ACM 0x02 #define USB_CDC_SUBCLASS_ETHERNET 0x06 #define USB_CDC_SUBCLASS_WHCM 0x08 @@ -221,3 +224,4 @@ struct usb_cdc_notification { __le16 wLength; } __attribute__ ((packed)); +#endif /* __LINUX_USB_CDC_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 6169438ec5a..7e0d3084f76 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -66,8 +66,8 @@ #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 /* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 /* * Standard requests, for the bRequest field of a SETUP packet. @@ -102,10 +102,16 @@ #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 +/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command, + * used by hubs to put ports into a new L1 suspend state, except that it + * forgot to define its number ... + */ + /* * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) + * are at most sixteen features of each type.) Hubs may also support a + * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. */ #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ @@ -180,6 +186,7 @@ struct usb_ctrlrequest { #define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 #define USB_DT_WIRE_ADAPTER 0x21 #define USB_DT_RPIPE 0x22 +#define USB_DT_CS_RADIO_CONTROL 0x23 /* Conventional codes for class-specific descriptors. The convention is * defined in the USB "Common Class" Spec (3.11). Individual class specs @@ -574,7 +581,9 @@ enum usb_device_state { /* NOTE: there are actually four different SUSPENDED * states, returning to POWERED, DEFAULT, ADDRESS, or * CONFIGURED respectively when SOF tokens flow again. + * At this level there's no difference between L1 and L2 + * suspend states. (L2 being original USB 1.1 suspend.) */ }; -#endif /* __LINUX_USB_CH9_H */ +#endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h index 0c5ea1e3eb9..6178fde50f7 100644 --- a/include/linux/usb/g_printer.h +++ b/include/linux/usb/g_printer.h @@ -18,6 +18,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#ifndef __LINUX_USB_G_PRINTER_H +#define __LINUX_USB_G_PRINTER_H #define PRINTER_NOT_ERROR 0x08 #define PRINTER_SELECTED 0x10 @@ -29,3 +31,5 @@ */ #define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) #define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) + +#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index f3295296b43..d8128f7102c 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -846,4 +846,4 @@ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit; -#endif /* __LINUX_USB_GADGET_H */ +#endif /* __LINUX_USB_GADGET_H */ diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h index c291ab1af74..ea45f265ec0 100644 --- a/include/linux/usb/gadgetfs.h +++ b/include/linux/usb/gadgetfs.h @@ -1,11 +1,3 @@ -#ifndef __LINUX_USB_GADGETFS_H -#define __LINUX_USB_GADGETFS_H - -#include <asm/types.h> -#include <asm/ioctl.h> - -#include <linux/usb/ch9.h> - /* * Filesystem based user-mode API to USB Gadget controller hardware * @@ -23,6 +15,14 @@ * then performing data transfers by reading or writing. */ +#ifndef __LINUX_USB_GADGETFS_H +#define __LINUX_USB_GADGETFS_H + +#include <asm/types.h> +#include <asm/ioctl.h> + +#include <linux/usb/ch9.h> + /* * Events are delivered on the ep0 file descriptor, when the user mode driver * reads from this file descriptor after writing the descriptors. Don't diff --git a/include/linux/usb/input.h b/include/linux/usb/input.h index 716e0cc1604..0e010b220e8 100644 --- a/include/linux/usb/input.h +++ b/include/linux/usb/input.h @@ -1,6 +1,3 @@ -#ifndef __USB_INPUT_H -#define __USB_INPUT_H - /* * Copyright (C) 2005 Dmitry Torokhov * @@ -9,6 +6,9 @@ * the Free Software Foundation. */ +#ifndef __LINUX_USB_INPUT_H +#define __LINUX_USB_INPUT_H + #include <linux/usb.h> #include <linux/input.h> #include <asm/byteorder.h> @@ -22,4 +22,4 @@ usb_to_input_id(const struct usb_device *dev, struct input_id *id) id->version = le16_to_cpu(dev->descriptor.bcdDevice); } -#endif +#endif /* __LINUX_USB_INPUT_H */ diff --git a/include/linux/usb/iowarrior.h b/include/linux/usb/iowarrior.h index de6f380e17a..4fd6513d564 100644 --- a/include/linux/usb/iowarrior.h +++ b/include/linux/usb/iowarrior.h @@ -1,5 +1,5 @@ -#ifndef _IOWARRIOR_H_ -#define _IOWARRIOR_H_ +#ifndef __LINUX_USB_IOWARRIOR_H +#define __LINUX_USB_IOWARRIOR_H #define CODEMERCS_MAGIC_NUMBER 0xC0 /* like COde Mercenaries */ @@ -39,4 +39,4 @@ struct iowarrior_info { */ #define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info) -#endif /* _IOWARRIOR_H_ */ +#endif /* __LINUX_USB_IOWARRIOR_H */ diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h index 67d2826f34f..96ca114e88d 100644 --- a/include/linux/usb/isp116x.h +++ b/include/linux/usb/isp116x.h @@ -1,9 +1,11 @@ - /* * Board initialization code should put one of these into dev->platform_data * and place the isp116x onto platform_bus. */ +#ifndef __LINUX_USB_ISP116X_H +#define __LINUX_USB_ISP116X_H + struct isp116x_platform_data { /* Enable internal resistors on downstream ports */ unsigned sel15Kres:1; @@ -27,3 +29,5 @@ struct isp116x_platform_data { */ void (*delay) (struct device *dev, int delay); }; + +#endif /* __LINUX_USB_ISP116X_H */ diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h index 80624c56292..1d104086566 100644 --- a/include/linux/usb/midi.h +++ b/include/linux/usb/midi.h @@ -109,4 +109,4 @@ struct usb_ms_endpoint_descriptor_##n { \ __u8 baAssocJackID[n]; \ } __attribute__ ((packed)) -#endif +#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h index ec897cb844a..96ca549a778 100644 --- a/include/linux/usb/net2280.h +++ b/include/linux/usb/net2280.h @@ -1,11 +1,7 @@ /* * NetChip 2280 high/full speed USB device controller. * Unlike many such controllers, this one talks PCI. - */ -#ifndef __LINUX_USB_NET2280_H -#define __LINUX_USB_NET2280_H - -/* + * * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) * Copyright (C) 2003 David Brownell * @@ -24,6 +20,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#ifndef __LINUX_USB_NET2280_H +#define __LINUX_USB_NET2280_H + /*-------------------------------------------------------------------------*/ /* NET2280 MEMORY MAPPED REGISTERS diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index e007074ebe4..1db25d152ad 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -1,11 +1,13 @@ /* USB OTG (On The Go) defines */ - /* + * * These APIs may be used between USB controllers. USB device drivers * (for either host or peripheral roles) don't use these calls; they * continue to use just usb_device and usb_gadget. */ +#ifndef __LINUX_USB_OTG_H +#define __LINUX_USB_OTG_H /* OTG defines lots of enumeration states before device reset */ enum usb_otg_state { @@ -129,3 +131,5 @@ otg_start_srp(struct otg_transceiver *otg) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); + +#endif /* __LINUX_USB_OTG_H */ diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 1f999ec8d08..7f6c603db65 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -4,6 +4,9 @@ * belong here. */ +#ifndef __LINUX_USB_QUIRKS_H +#define __LINUX_USB_QUIRKS_H + /* string descriptors must not be fetched using a 255-byte read */ #define USB_QUIRK_STRING_FETCH_255 0x00000001 @@ -12,3 +15,5 @@ /* device can't handle Set-Interface requests */ #define USB_QUIRK_NO_SET_INTF 0x00000004 + +#endif /* __LINUX_USB_QUIRKS_H */ diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h index edc1d4a0e27..29d6458ecb8 100644 --- a/include/linux/usb/rndis_host.h +++ b/include/linux/usb/rndis_host.h @@ -17,10 +17,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - -#ifndef __RNDIS_HOST_H -#define __RNDIS_HOST_H - +#ifndef __LINUX_USB_RNDIS_HOST_H +#define __LINUX_USB_RNDIS_HOST_H /* * CONTROL uses CDC "encapsulated commands" with funky notifications. @@ -270,5 +268,4 @@ extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb); extern struct sk_buff * rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags); -#endif /* __RNDIS_HOST_H */ - +#endif /* __LINUX_USB_RNDIS_HOST_H */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 21b4a1c6f58..8f891cbaf9a 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -10,7 +10,6 @@ * */ - #ifndef __LINUX_USB_SERIAL_H #define __LINUX_USB_SERIAL_H @@ -146,8 +145,6 @@ struct usb_serial { }; #define to_usb_serial(d) container_of(d, struct usb_serial, kref) -#define NUM_DONT_CARE 99 - /* get and set the serial private data pointer helper functions */ static inline void *usb_get_serial_data(struct usb_serial *serial) { @@ -165,18 +162,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * used in the syslog messages when a device is inserted or removed. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. - * @num_interrupt_in: If a device doesn't have this many interrupt-in - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) - * @num_interrupt_out: If a device doesn't have this many interrupt-out - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) - * @num_bulk_in: If a device doesn't have this many bulk-in - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) - * @num_bulk_out: If a device doesn't have this many bulk-out - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) * @num_ports: the number of different ports this device will have. * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It will be called after the probe() @@ -212,10 +197,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) struct usb_serial_driver { const char *description; const struct usb_device_id *id_table; - char num_interrupt_in; - char num_interrupt_out; - char num_bulk_in; - char num_bulk_out; char num_ports; struct list_head driver_list; @@ -340,5 +321,5 @@ static inline void usb_serial_debug_data(int debug, -#endif /* ifdef __LINUX_USB_SERIAL_H */ +#endif /* __LINUX_USB_SERIAL_H */ diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h index 877373da410..3afe4d16fce 100644 --- a/include/linux/usb/sl811.h +++ b/include/linux/usb/sl811.h @@ -1,9 +1,11 @@ - /* * board initialization should put one of these into dev->platform_data * and place the sl811hs onto platform_bus named "sl811-hcd". */ +#ifndef __LINUX_USB_SL811_H +#define __LINUX_USB_SL811_H + struct sl811_platform_data { unsigned can_wakeup:1; @@ -24,3 +26,4 @@ struct sl811_platform_data { /* void (*clock_enable)(struct device *dev, int is_on); */ }; +#endif /* __LINUX_USB_SL811_H */ diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index e0501da3dd1..ba09fe88add 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -19,10 +19,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - -#ifndef __USBNET_H -#define __USBNET_H - +#ifndef __LINUX_USB_USBNET_H +#define __LINUX_USB_USBNET_H /* interface from usbnet core to each USB networking link we handle */ struct usbnet { @@ -211,4 +209,4 @@ extern int usbnet_nway_reset(struct net_device *net); printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \ -#endif /* __USBNET_H */ +#endif /* __LINUX_USB_USBNET_H */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 0a40dfa44c9..d9a3bbe38e6 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -85,6 +85,7 @@ enum { US_DO_ALL_FLAGS }; #define US_SC_LOCKABLE 0x07 /* Password-protected */ #define US_SC_ISD200 0xf0 /* ISD200 ATA */ +#define US_SC_CYP_ATACB 0xf1 /* Cypress ATACB */ #define US_SC_DEVICE 0xff /* Use device's value */ /* Protocols */ diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 17cb108b7db..3118ede2c67 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -77,8 +77,11 @@ struct usbdevfs_connectinfo { unsigned char slow; }; -#define USBDEVFS_URB_SHORT_NOT_OK 1 -#define USBDEVFS_URB_ISO_ASAP 2 +#define USBDEVFS_URB_SHORT_NOT_OK 0x01 +#define USBDEVFS_URB_ISO_ASAP 0x02 +#define USBDEVFS_URB_NO_FSBR 0x20 +#define USBDEVFS_URB_ZERO_PACKET 0x40 +#define USBDEVFS_URB_NO_INTERRUPT 0x80 #define USBDEVFS_URB_TYPE_ISO 0 #define USBDEVFS_URB_TYPE_INTERRUPT 1 diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 17a80177a67..c1411189ba6 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -282,6 +282,7 @@ struct v4l2_pix_format #define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B','G','R','4') /* 32 BGR-8-8-8-8 */ #define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R','G','B','4') /* 32 RGB-8-8-8-8 */ #define V4L2_PIX_FMT_GREY v4l2_fourcc('G','R','E','Y') /* 8 Greyscale */ +#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y','1','6',' ') /* 16 Greyscale */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P','A','L','8') /* 8 8-bit palette */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y','V','U','9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y','V','1','2') /* 12 YVU 4:2:0 */ @@ -308,6 +309,7 @@ struct v4l2_pix_format /* see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B','A','8','1') /* 8 BGBG.. GRGR.. */ +#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B','Y','R','2') /* 16 BGBG.. GRGR.. */ /* compressed formats */ #define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M','J','P','G') /* Motion-JPEG */ @@ -793,6 +795,7 @@ struct v4l2_ext_controls /* Values for ctrl_class field */ #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ +#define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -849,21 +852,37 @@ struct v4l2_querymenu #define V4L2_CID_AUDIO_TREBLE (V4L2_CID_BASE+8) #define V4L2_CID_AUDIO_MUTE (V4L2_CID_BASE+9) #define V4L2_CID_AUDIO_LOUDNESS (V4L2_CID_BASE+10) -#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) +#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) /* Deprecated */ #define V4L2_CID_AUTO_WHITE_BALANCE (V4L2_CID_BASE+12) #define V4L2_CID_DO_WHITE_BALANCE (V4L2_CID_BASE+13) #define V4L2_CID_RED_BALANCE (V4L2_CID_BASE+14) #define V4L2_CID_BLUE_BALANCE (V4L2_CID_BASE+15) #define V4L2_CID_GAMMA (V4L2_CID_BASE+16) -#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* ? Not sure */ +#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* Deprecated */ #define V4L2_CID_EXPOSURE (V4L2_CID_BASE+17) #define V4L2_CID_AUTOGAIN (V4L2_CID_BASE+18) #define V4L2_CID_GAIN (V4L2_CID_BASE+19) #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+24) /* last CID + 1 */ + +/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ +#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22) +#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23) + +#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) +enum v4l2_power_line_frequency { + V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, + V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1, + V4L2_CID_POWER_LINE_FREQUENCY_60HZ = 2, +}; +#define V4L2_CID_HUE_AUTO (V4L2_CID_BASE+25) +#define V4L2_CID_WHITE_BALANCE_TEMPERATURE (V4L2_CID_BASE+26) +#define V4L2_CID_SHARPNESS (V4L2_CID_BASE+27) +#define V4L2_CID_BACKLIGHT_COMPENSATION (V4L2_CID_BASE+28) +#define V4L2_CID_CHROMA_AGC (V4L2_CID_BASE+29) +#define V4L2_CID_COLOR_KILLER (V4L2_CID_BASE+30) +/* last CID + 1 */ +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+31) /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) @@ -1051,6 +1070,32 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type { #define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+10) #define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_MPEG_CX2341X_BASE+11) +/* Camera class control IDs */ +#define V4L2_CID_CAMERA_CLASS_BASE (V4L2_CTRL_CLASS_CAMERA | 0x900) +#define V4L2_CID_CAMERA_CLASS (V4L2_CTRL_CLASS_CAMERA | 1) + +#define V4L2_CID_EXPOSURE_AUTO (V4L2_CID_CAMERA_CLASS_BASE+1) +enum v4l2_exposure_auto_type { + V4L2_EXPOSURE_AUTO = 0, + V4L2_EXPOSURE_MANUAL = 1, + V4L2_EXPOSURE_SHUTTER_PRIORITY = 2, + V4L2_EXPOSURE_APERTURE_PRIORITY = 3 +}; +#define V4L2_CID_EXPOSURE_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+2) +#define V4L2_CID_EXPOSURE_AUTO_PRIORITY (V4L2_CID_CAMERA_CLASS_BASE+3) + +#define V4L2_CID_PAN_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+4) +#define V4L2_CID_TILT_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+5) +#define V4L2_CID_PAN_RESET (V4L2_CID_CAMERA_CLASS_BASE+6) +#define V4L2_CID_TILT_RESET (V4L2_CID_CAMERA_CLASS_BASE+7) + +#define V4L2_CID_PAN_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+8) +#define V4L2_CID_TILT_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+9) + +#define V4L2_CID_FOCUS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+10) +#define V4L2_CID_FOCUS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+11) +#define V4L2_CID_FOCUS_AUTO (V4L2_CID_CAMERA_CLASS_BASE+12) + /* * T U N I N G */ diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h new file mode 100644 index 00000000000..4d13732e9cf --- /dev/null +++ b/include/linux/wm97xx.h @@ -0,0 +1,314 @@ + +/* + * Register bits and API for Wolfson WM97xx series of codecs + */ + +#ifndef _LINUX_WM97XX_H +#define _LINUX_WM97XX_H + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/ac97_codec.h> +#include <sound/initval.h> +#include <linux/types.h> +#include <linux/list.h> +#include <linux/input.h> /* Input device layer */ +#include <linux/platform_device.h> + +/* + * WM97xx AC97 Touchscreen registers + */ +#define AC97_WM97XX_DIGITISER1 0x76 +#define AC97_WM97XX_DIGITISER2 0x78 +#define AC97_WM97XX_DIGITISER_RD 0x7a +#define AC97_WM9713_DIG1 0x74 +#define AC97_WM9713_DIG2 AC97_WM97XX_DIGITISER1 +#define AC97_WM9713_DIG3 AC97_WM97XX_DIGITISER2 + +/* + * WM97xx register bits + */ +#define WM97XX_POLL 0x8000 /* initiate a polling measurement */ +#define WM97XX_ADCSEL_X 0x1000 /* x coord measurement */ +#define WM97XX_ADCSEL_Y 0x2000 /* y coord measurement */ +#define WM97XX_ADCSEL_PRES 0x3000 /* pressure measurement */ +#define WM97XX_ADCSEL_MASK 0x7000 +#define WM97XX_COO 0x0800 /* enable coordinate mode */ +#define WM97XX_CTC 0x0400 /* enable continuous mode */ +#define WM97XX_CM_RATE_93 0x0000 /* 93.75Hz continuous rate */ +#define WM97XX_CM_RATE_187 0x0100 /* 187.5Hz continuous rate */ +#define WM97XX_CM_RATE_375 0x0200 /* 375Hz continuous rate */ +#define WM97XX_CM_RATE_750 0x0300 /* 750Hz continuous rate */ +#define WM97XX_CM_RATE_8K 0x00f0 /* 8kHz continuous rate */ +#define WM97XX_CM_RATE_12K 0x01f0 /* 12kHz continuous rate */ +#define WM97XX_CM_RATE_24K 0x02f0 /* 24kHz continuous rate */ +#define WM97XX_CM_RATE_48K 0x03f0 /* 48kHz continuous rate */ +#define WM97XX_CM_RATE_MASK 0x03f0 +#define WM97XX_RATE(i) (((i & 3) << 8) | ((i & 4) ? 0xf0 : 0)) +#define WM97XX_DELAY(i) ((i << 4) & 0x00f0) /* sample delay times */ +#define WM97XX_DELAY_MASK 0x00f0 +#define WM97XX_SLEN 0x0008 /* slot read back enable */ +#define WM97XX_SLT(i) ((i - 5) & 0x7) /* panel slot (5-11) */ +#define WM97XX_SLT_MASK 0x0007 +#define WM97XX_PRP_DETW 0x4000 /* detect on, digitise off, wake */ +#define WM97XX_PRP_DET 0x8000 /* detect on, digitise off, no wake */ +#define WM97XX_PRP_DET_DIG 0xc000 /* setect on, digitise on */ +#define WM97XX_RPR 0x2000 /* wake up on pen down */ +#define WM97XX_PEN_DOWN 0x8000 /* pen is down */ +#define WM97XX_ADCSRC_MASK 0x7000 /* ADC source mask */ + +#define WM97XX_AUX_ID1 0x8001 +#define WM97XX_AUX_ID2 0x8002 +#define WM97XX_AUX_ID3 0x8003 +#define WM97XX_AUX_ID4 0x8004 + + +/* WM9712 Bits */ +#define WM9712_45W 0x1000 /* set for 5-wire touchscreen */ +#define WM9712_PDEN 0x0800 /* measure only when pen down */ +#define WM9712_WAIT 0x0200 /* wait until adc is read before next sample */ +#define WM9712_PIL 0x0100 /* current used for pressure measurement. set 400uA else 200uA */ +#define WM9712_MASK_HI 0x0040 /* hi on mask pin (47) stops conversions */ +#define WM9712_MASK_EDGE 0x0080 /* rising/falling edge on pin delays sample */ +#define WM9712_MASK_SYNC 0x00c0 /* rising/falling edge on mask initiates sample */ +#define WM9712_RPU(i) (i&0x3f) /* internal pull up on pen detect (64k / rpu) */ +#define WM9712_PD(i) (0x1 << i) /* power management */ + +/* WM9712 Registers */ +#define AC97_WM9712_POWER 0x24 +#define AC97_WM9712_REV 0x58 + +/* WM9705 Bits */ +#define WM9705_PDEN 0x1000 /* measure only when pen is down */ +#define WM9705_PINV 0x0800 /* inverts sense of pen down output */ +#define WM9705_BSEN 0x0400 /* BUSY flag enable, pin47 is 1 when busy */ +#define WM9705_BINV 0x0200 /* invert BUSY (pin47) output */ +#define WM9705_WAIT 0x0100 /* wait until adc is read before next sample */ +#define WM9705_PIL 0x0080 /* current used for pressure measurement. set 400uA else 200uA */ +#define WM9705_PHIZ 0x0040 /* set PHONE and PCBEEP inputs to high impedance */ +#define WM9705_MASK_HI 0x0010 /* hi on mask stops conversions */ +#define WM9705_MASK_EDGE 0x0020 /* rising/falling edge on pin delays sample */ +#define WM9705_MASK_SYNC 0x0030 /* rising/falling edge on mask initiates sample */ +#define WM9705_PDD(i) (i & 0x000f) /* pen detect comparator threshold */ + + +/* WM9713 Bits */ +#define WM9713_PDPOL 0x0400 /* Pen down polarity */ +#define WM9713_POLL 0x0200 /* initiate a polling measurement */ +#define WM9713_CTC 0x0100 /* enable continuous mode */ +#define WM9713_ADCSEL_X 0x0002 /* X measurement */ +#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */ +#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */ +#define WM9713_COO 0x0001 /* enable coordinate mode */ +#define WM9713_PDEN 0x0800 /* measure only when pen down */ +#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */ +#define WM9713_WAIT 0x0200 /* coordinate wait */ + +/* AUX ADC ID's */ +#define TS_COMP1 0x0 +#define TS_COMP2 0x1 +#define TS_BMON 0x2 +#define TS_WIPER 0x3 + +/* ID numbers */ +#define WM97XX_ID1 0x574d +#define WM9712_ID2 0x4c12 +#define WM9705_ID2 0x4c05 +#define WM9713_ID2 0x4c13 + +/* Codec GPIO's */ +#define WM97XX_MAX_GPIO 16 +#define WM97XX_GPIO_1 (1 << 1) +#define WM97XX_GPIO_2 (1 << 2) +#define WM97XX_GPIO_3 (1 << 3) +#define WM97XX_GPIO_4 (1 << 4) +#define WM97XX_GPIO_5 (1 << 5) +#define WM97XX_GPIO_6 (1 << 6) +#define WM97XX_GPIO_7 (1 << 7) +#define WM97XX_GPIO_8 (1 << 8) +#define WM97XX_GPIO_9 (1 << 9) +#define WM97XX_GPIO_10 (1 << 10) +#define WM97XX_GPIO_11 (1 << 11) +#define WM97XX_GPIO_12 (1 << 12) +#define WM97XX_GPIO_13 (1 << 13) +#define WM97XX_GPIO_14 (1 << 14) +#define WM97XX_GPIO_15 (1 << 15) + + +#define AC97_LINK_FRAME 21 /* time in uS for AC97 link frame */ + + +/*---------------- Return codes from sample reading functions ---------------*/ + +/* More data is available; call the sample gathering function again */ +#define RC_AGAIN 0x00000001 +/* The returned sample is valid */ +#define RC_VALID 0x00000002 +/* The pen is up (the first RC_VALID without RC_PENUP means pen is down) */ +#define RC_PENUP 0x00000004 +/* The pen is down (RC_VALID implies RC_PENDOWN, but sometimes it is helpful + to tell the handler that the pen is down but we don't know yet his coords, + so the handler should not sleep or wait for pendown irq) */ +#define RC_PENDOWN 0x00000008 + +/* + * The wm97xx driver provides a private API for writing platform-specific + * drivers. + */ + +/* The structure used to return arch specific sampled data into */ +struct wm97xx_data { + int x; + int y; + int p; +}; + +/* + * Codec GPIO status + */ +enum wm97xx_gpio_status { + WM97XX_GPIO_HIGH, + WM97XX_GPIO_LOW +}; + +/* + * Codec GPIO direction + */ +enum wm97xx_gpio_dir { + WM97XX_GPIO_IN, + WM97XX_GPIO_OUT +}; + +/* + * Codec GPIO polarity + */ +enum wm97xx_gpio_pol { + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_POL_LOW +}; + +/* + * Codec GPIO sticky + */ +enum wm97xx_gpio_sticky { + WM97XX_GPIO_STICKY, + WM97XX_GPIO_NOTSTICKY +}; + +/* + * Codec GPIO wake + */ +enum wm97xx_gpio_wake { + WM97XX_GPIO_WAKE, + WM97XX_GPIO_NOWAKE +}; + +/* + * Digitiser ioctl commands + */ +#define WM97XX_DIG_START 0x1 +#define WM97XX_DIG_STOP 0x2 +#define WM97XX_PHY_INIT 0x3 +#define WM97XX_AUX_PREPARE 0x4 +#define WM97XX_DIG_RESTORE 0x5 + +struct wm97xx; + +extern struct wm97xx_codec_drv wm9705_codec; +extern struct wm97xx_codec_drv wm9712_codec; +extern struct wm97xx_codec_drv wm9713_codec; + +/* + * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs + */ +struct wm97xx_codec_drv { + u16 id; + char *name; + + /* read 1 sample */ + int (*poll_sample) (struct wm97xx *, int adcsel, int *sample); + + /* read X,Y,[P] in poll */ + int (*poll_touch) (struct wm97xx *, struct wm97xx_data *); + + int (*acc_enable) (struct wm97xx *, int enable); + void (*phy_init) (struct wm97xx *); + void (*dig_enable) (struct wm97xx *, int enable); + void (*dig_restore) (struct wm97xx *); + void (*aux_prepare) (struct wm97xx *); +}; + + +/* Machine specific and accelerated touch operations */ +struct wm97xx_mach_ops { + + /* accelerated touch readback - coords are transmited on AC97 link */ + int acc_enabled; + void (*acc_pen_up) (struct wm97xx *); + int (*acc_pen_down) (struct wm97xx *); + int (*acc_startup) (struct wm97xx *); + void (*acc_shutdown) (struct wm97xx *); + + /* interrupt mask control - required for accelerated operation */ + void (*irq_enable) (struct wm97xx *, int enable); + + /* GPIO pin used for accelerated operation */ + int irq_gpio; + + /* pre and post sample - can be used to minimise any analog noise */ + void (*pre_sample) (int); /* function to run before sampling */ + void (*post_sample) (int); /* function to run after sampling */ +}; + +struct wm97xx { + u16 dig[3], id, gpio[6], misc; /* Cached codec registers */ + u16 dig_save[3]; /* saved during aux reading */ + struct wm97xx_codec_drv *codec; /* attached codec driver*/ + struct input_dev *input_dev; /* touchscreen input device */ + struct snd_ac97 *ac97; /* ALSA codec access */ + struct device *dev; /* ALSA device */ + struct platform_device *battery_dev; + struct platform_device *touch_dev; + struct wm97xx_mach_ops *mach_ops; + struct mutex codec_mutex; + struct delayed_work ts_reader; /* Used to poll touchscreen */ + unsigned long ts_reader_interval; /* Current interval for timer */ + unsigned long ts_reader_min_interval; /* Minimum interval */ + unsigned int pen_irq; /* Pen IRQ number in use */ + struct workqueue_struct *ts_workq; + struct work_struct pen_event_work; + u16 acc_slot; /* AC97 slot used for acc touch data */ + u16 acc_rate; /* acc touch data rate */ + unsigned pen_is_down:1; /* Pen is down */ + unsigned aux_waiting:1; /* aux measurement waiting */ + unsigned pen_probably_down:1; /* used in polling mode */ + u16 suspend_mode; /* PRP in suspend mode */ +}; + +/* + * Codec GPIO access (not supported on WM9705) + * This can be used to set/get codec GPIO and Virtual GPIO status. + */ +enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio); +void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio, + enum wm97xx_gpio_status status); +void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, + enum wm97xx_gpio_dir dir, + enum wm97xx_gpio_pol pol, + enum wm97xx_gpio_sticky sticky, + enum wm97xx_gpio_wake wake); + +void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode); + +/* codec AC97 IO access */ +int wm97xx_reg_read(struct wm97xx *wm, u16 reg); +void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val); + +/* aux adc readback */ +int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel); + +/* machine ops */ +int wm97xx_register_mach_ops(struct wm97xx *, struct wm97xx_mach_ops *); +void wm97xx_unregister_mach_ops(struct wm97xx *); + +#endif diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 0c82c80b277..2ca6bae8872 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -97,10 +97,10 @@ struct xfrm_algo { }; struct xfrm_algo_aead { - char alg_name[64]; - int alg_key_len; /* in bits */ - int alg_icv_len; /* in bits */ - char alg_key[0]; + char alg_name[64]; + unsigned int alg_key_len; /* in bits */ + unsigned int alg_icv_len; /* in bits */ + char alg_key[0]; }; struct xfrm_stats { |