summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-09-03sfc: Removed forced inlining of long functionsBen Hutchings
gcc will automatically inline static functions with only one caller, and may inline other functions depending on the kernel configuration and size of the intermediate code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Cleaned up struct tso_state fieldsBen Hutchings
Squashed nested structures. Renamed remaining_len to out_len, ifc.len to in_len, header_length to header_len. Moved ipv4_id into the group of output variables where it belongs. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Set net_device::vlan_features appropriatelyBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Use explicit bool for boolean variables, parameters and return valuesBen Hutchings
Replace (cond ? 1 : 0) with cond or !!cond as appropriate, and (cond ? 0 : 1) with !cond. Remove some redundant boolean temporaries. Rename one field that looks like a flag but isn't. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Reduce the size of struct efx_tx_bufferBen Hutchings
Remove unmap_addr since it can be calculated from dma_addr, len and unmap_len. This saves 4-16 bytes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Use pci_map_single() to map the skb header when doing TSOBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Don't leak PCI DMA maps in the TSO code when the queue fills upBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Speed up loopback self-testBen Hutchings
Add efx_poll_loopback() function to test for successful completion of test. Change efx_test_loopback() to end the test after 1 ms if efx_poll_loopback() indicates success, and otherwise to wait for 100 ms as before. While we're here, rename efx_{rx,tx}_loopback() to efx_{begin,end}_loopback() which more accurately reflect their purpose. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Self-test reporting cleanupBen Hutchings
Removed log messages that are redundant with calling functions. Fixed bitwise or-ing of return codes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Reduce log level for XGXS lane statusBen Hutchings
This was making noise during 10Xpress self-test. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Reverse the XOFF/XON pause frame control fifo thresholdsBen Hutchings
These were clearly bogus. From: Steve Hodgson <shodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Remove inclusion of workarounds.h from efx.cBen Hutchings
efx.c does not use hardware workarounds. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: XMAC statistics fix-upsBen Hutchings
Exclude assumed size of RX control frames from rx_bad_bytes. Exclude assumed size of TX control frames from tx_good_bytes for consistency with rx_good_bytes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Remove mistaken hardware workaroundBen Hutchings
We believed that some valid SNAP frames were being marked as invalid. In fact this is not the case and no workaround is needed. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Reduce delays in SFE4001 initialisationBen Hutchings
Currently the board initialisation includes 2 delays of 1 second each. Usually it is unnecessary to wait that long, so check before doing so. Correct some of the comments and log messages while we're here. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Avoid mangling error codes in efx_test_loopback()Ben Hutchings
efx_test_loopback() used "|" to combine the results of the RX and TX phases. If both phases fail with different error codes, this results in a bogus error code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Use separate hardware TX queues to select checksum generationBen Hutchings
Checksum generation is an attribute of our hardware TX queues, not TX descriptors. We previously used a single queue and turned checksum generation on or off as requested through ethtool. However, this can result in regenerating checksums in raw packets that should not be modified. We now create 2 hardware TX queues with checksum generation on or off. They are presented to the net core as one queue since it does not know how to select between them. The self-test verifies that a bad checksum is unaltered on the queue with checksum generation off. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Remove unused field efx_channel::reset_workSteve Hodgson
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Change first parameter type of {set,clear}_bit_le() to unsignedBen Hutchings
This means the compiler doesn't need to use real division instructions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sfc: Replace net_dev->priv with netdev_priv(net_dev)Ben Hutchings
Use of the net_device::priv field is deprecated. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-02netlink: Remove compat API for nested attributesThomas Graf
Removes all _nested_compat() functions from the API. The prio qdisc no longer requires them and netem has its own format anyway. Their existance is only confusing. Resend: Also remove the wrapper macro. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/mlme.c
2008-08-29net: Unbreak userspace usage of linux/mroute.hDavid S. Miller
Nothing in linux/pim.h should be exported to userspace. This should fix the XORP build failure reported by Jose Calhariz, the debain package maintainer. Nothing originally in linux/mroute.h was exported to userspace ever, but some of this stuff started to be when it was moved into this new linux/pim.h, and that was wrong. If we didn't provide these definitions for 10 years we can reasonably expect that applications defined this stuff locally or used GLIBC headers providing the protocol definitions. And as such the only result of this can be conflict and userland build breakage. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29pkt_sched: Fix locking of qdisc_root with qdisc_root_sleeping_lock()Jarek Poplawski
Use qdisc_root_sleeping_lock() instead of qdisc_root_lock() where appropriate. The only difference is while dev is deactivated, when currently we can use a sleeping qdisc with the lock of noop_qdisc. This shouldn't be dangerous since after deactivation root lock could be used only by gen_estimator code, but looks wrong anyway. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29ipv6: When we droped a packet, we should return NET_RX_DROP instead of 0Yang Hongyang
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-08-29b43: Rewrite TX power adjustmentMichael Buesch
This patch rewrites the TX power recalculation algorithms to scale better with changed enviromnent. If there's low TX traffic, the power will be checked against the desired values every 60 seconds. If there is high TX traffic, the check is redone every 2 seconds. This improves the reaction times a lot and confuses the rate control less. It will also reduce the time it initially takes to tune to a new TX power value. With the old algorithm it could take about 30 to 45 seconds to settle to a new power value. This will happen in about two to four seconds now. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29b43: Implement dynamic PHY APIMichael Buesch
This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rt2x00: Release rt2x00 2.2.1Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rt2x00: skb->data pointer should not include TX descriptorMattias Nissler
Make sure the skb->data pointer points to the frame data, not the TX descriptor. The frame dumping code relies on that. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rt2x00: Add Signal type flagIvo van Doorn
Instead of using the PLCP flag to indicate if the signal value is plcp or the bitrate we should add a new flag to mark the bitrate type explicitely. This is usefull when new types are added later for rt2800. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rt2x00: Initialize txop during conf_tx() callbackIvo van Doorn
The txop parameter is supported by rt61pci and rt73usb, and thus should be written to the register instead of using the fixed value set during initialization. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rt2x00: Only configure hardware when radio is enabledMattias Nissler
Some hardware configuration registers such as antenna and channel configuration can only be written when the radio is enabled. Previously, we didn't consider this, so some configuration items could be set inconsistently after reenabling the radio. This patch changes the config() handler to only reprogram the hardware when the radio is enabled. Configuration changes that are made while the radio is off are postponed until the radio is switched back on. We also leave the radio turned off during initialization and only enable it when requested by mac80211. This allows us to get rid of the DIRTY_CONFIG flag, because the device is now guaranteed to be completely initialized when brought up by mac80211. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rt2x00: Map extra_tx_headroom to DMAIvo van Doorn
If a driver requests additional headroom it should be mapped to DMA as well because it will be send to the hardware as well (as form of extra descriptor). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rt2x00: Fix race conditions in flag handlingIvo van Doorn
Some of the flags should be accessed atomically to prevent race conditions. The flags that are most important are those that can change often and indicate the actual state of the device, queue or queue entry. The big flag rename was done to move all state flags to the same naming type as the other rt2x00dev flags and made sure all places where the flags were used were changed. ;) Thanks to Stephen for most of the queue flags updates, which fixes some of the most obvious consequences of the race conditions. Among those the notorious: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: use the common frame control functionsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: rename rfkill_mutex to rfkill_global_mutexHenrique de Moraes Holschuh
rfkill_mutex and rfkill->mutex are too easy to confuse with each other. Rename rfkill_mutex to rfkill_global_mutex, so that they are easier to tell apart with just one glance. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: add WARN and BUG_ON paranoia (v2)Henrique de Moraes Holschuh
BUG_ON() and WARN() the heck out of buggy drivers calling into the rfkill subsystem. Also switch from WARN_ON(1) to the new descriptive WARN(). Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: add missing line breakFelipe Balbi
Trivial patch adding a missing line break on rfkill_claim_show(). Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.co> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: use strict_strtoul (v2)Henrique de Moraes Holschuh
Switch sysfs parsing to something that actually works properly. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: rc.h cleanupSujith
Use kernel doc syntax for comments and remove a few unused macros. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove sc_lastrx as we don't use it anywhereSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Do not update frame's duration fieldSujith
When AR_DurUpdateEna is set, the frame's duration field is updated by the MAC based on the current rate. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove more dead codeSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Add LED supportVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211/cfg80211: HT capabilities for NEW_STAJouni Malinen
Allow userspace (e.g., hostapd) to set HT capabilities for associated STAs. This is based on a patch from Zhu Yi <yi.zhu@intel.com> (only the NL80211_ATTR_HT_CAPABILITY for NEW_STA part is included here). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29p54pci: rx tasklet refactoringChristian Lamparter
This patch moves the all of p54pci's receiver code out of the bloated interrupt handler routine and into a less critical tasklet. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29p54: redo queue numberingChr
The firmware supports 8 different queues and not only 4. So, let's make some room for further tasks (ap/adhoc support) in this area. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29p54: take tx_queue's lock in rx_frame_sentChr
p54_rx_frame_sent will alter the tx_queue. Therefore we should hold the lock to protect against concurrent p54_assign_address calls. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29p54: fix rssi auto calibrationChristian Lamparter
Ever wondered why the signal was so bad with p54 compared to madwifi, or intel? Well, if you have revision 1 rssi calibration curve points in your EEPROM, then wonder no more. The firmware wants a extra 1 byte padding for every curve point. But someone forgot to put them into the EEPROM's data structure... So now, big question: what happens when we blindly "memcpy" these data points? Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 02:41:58 +0000