Age | Commit message (Collapse) | Author |
|
Change-Id: I2fcf46d1fc4b0cd4c61e5be3654c43b80db86015
|
|
Dynamic handling of pins does not work properly if done manually from suspend/resume hooks,
so let's remove it for the time beeing.
ST-Ericsson Linux next: -
ST-Ericsson ID: 369952
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I3b130256b19af7feae9db0e4a1bd72c7856bb88c
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35405
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
Reviewed-by: QABUILD
|
|
ST-Ericsson ID: 368260
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Depends-On: I5307cb7f58fdf890896d641a8e4f49098a90b68e
Change-Id: I9ef4ff1c63f6ec9293ece4013f13cf3caa707d9d
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34307
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
|
|
Enable DMA again now when power save for MMC and DMA is in place.
Patch is tested:
* suspend and resume successfully in Android.
* suspend video playback from sd-card and resume it
successfully in Android.
ST-Ericsson ID: 370129
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4eb9367c3feeb8661e33035d4d3022205b9e924b
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35325
Reviewed-by: Stefan NILSSON9 <stefan.xk.nilsson@stericsson.com>
Tested-by: Stefan NILSSON9 <stefan.xk.nilsson@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Changes needed due to the following commit:
PM: Limit race conditions between runtime PM and system sleep (v2)
Previously it was was possible for drivers doing pm_runtime_suspend
and pm_runtime_put_sync directly from it's suspend callbacks. Now
suspend_noirq shall be used, thus this is implemented for AMBA.
Additionally pm_runtime is now disabled during system suspend,
meaning "pm_runtime_status_suspended" must be used in
suspend|resume_noirq context instead of "pm_runtime_suspended".
Change-Id: Idda935d422884ecb3c4b6f5e415cd2e0077b06c7
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35504
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
|
|
fbdev create use an hmdi specific function. This patch
remove that function and makes fbcreate generic and shared.
ST-Ericsson ID: 369972
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I8a4b148bb6a01cde74fbe7c4fb30e9d7ee77ef68
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35244
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Robert MARKLUND <robert.marklund@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
CONFIG_U8500_CPUIDLE_DEBUG has been renamed to UX500.
Fix the source file so that the code actually gets
built.
ST-Ericsson ID: 370028
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Id2c9019f2e319b9cebd92e268194e0652dbfd265
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35275
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
|
|
cw1200 device has hardware clock control. However on some platforms
it is required to explicitly enable clock for the device.
The patch adds a clock control callback into the platform data.
ST-Ericsson ID: 361990
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ic4cfa86559e0968238dd0f49dd4391354c241f47
Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34294
Reviewed-by: QABUILD
Tested-by: Bartosz MARKOWSKI <bartosz.markowski@tieto.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
With a u9500-100 software, "pins_for_u9500" as well as
"machine_is_hrefv60" returns true. So, if
"machine_is_hrefv60" is tested before "pins_for_u9500",
the u9500 specifics will never be applied.
ST-Ericsson ID: 369957
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I33aacae5948174187dff80a51692938d49184f80
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35238
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Rejane DURAND <rejane.durand@stericsson.com>
Tested-by: Rejane DURAND <rejane.durand@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
There are two parts in this correction.
Firstly, as there is much in common between a U9500 platform
and a U8500 one, all the tests performed to identify a U9500 platform
shall be done before the ones related to U8500. Otherwise,
the platform will be considered as a U8500 one and the GPIOs will
be badly configured.
Secondly, the mapping of WLAN_IRQ has to be changed. On U8500, WLAN_IRQ
is mapped onto GPIO04. On U9500, it is GPIO144 that shall be used.
ST-Ericsson ID: 368270
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I5880f617c65f7cf4ca9eeabf22a53f7a77c20133
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34320
Reviewed-by: Rejane DURAND <rejane.durand@stericsson.com>
Tested-by: Rejane DURAND <rejane.durand@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Baptiste CHAULOUX <baptiste.chauloux@stericsson.com>
Tested-by: Baptiste CHAULOUX <baptiste.chauloux@stericsson.com>
Reviewed-by: Christophe GUIBOUT <christophe.guibout@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Reads specific DBx500 register in case of kernel crash
and saves it in kernel system memory.
ST-Ericsson ID: 367366
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: N/A
Change-Id: Ib8da2ab5eaad57b780c00aad495c5d689b081460
Signed-off-by: Johan Bjornstedt <johan.palsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34368
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Make device registration more dynamic using mach_is_xxx()
and uib_is_xxx() type of calls instead of having compile
time Kconfig settings. And clean out most unused static
configuration data.
ST-Ericsson ID: 368402
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I37dad7a96017e8f48f77645a4ef417632035651e
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34285
|
|
Remove DSI generic device from u5500 board
since it's no longer used/supported in that config.
ST-Ericsson ID: 368802
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I7b2ef387e1a4333a06d99b9c90cd6c4ad884bd1c
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34407
Reviewed-by: QATOOLS
|
|
DPI display device is no longer used or supported
ST-Ericsson ID: 368801
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: If32b34580ab01c74a2b8b91961d6f267550f8252
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34406
Reviewed-by: QATOOLS
|
|
This patch will enable the lcla in esram feature.
ST-Ericsson ID: 364165
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: If5d86036b8b9ef72863c447f0e400bb4e51b2ab3
Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33924
Reviewed-by: QABUILD
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Replaced by gpio-keyboard implementation.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic6c8ea1d83c4b3d8ad6bbd9aa06ff30213cab6be
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32695
|
|
Update the gpio-keyboard use of hal and proximity sensors to
use the ux500 pin framework.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I409d9734c3995d6cfdfff8c7196624a4f89b3e2d
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32694
|
|
Information only valid to force gpio pins when suspending
was displayed.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I47b9204449a27ddae6a3054b191192aa160917c2
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33864
|
|
Each time debugfs/pins was accessed a small chunch of memory
was lost.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic5752e1d835e2998019a950048ac992b6f9725a6
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34921
|
|
Using power domains for a device and then calling generic
runtime functions will shortcut runtime functions for the
"type", "class" and "bus". For the AMBA bus this needs to
be handled, thus check if bus runtime functions exist and
then use them instead of the generic runtime functions.
Moreover an AMBA device is during probe put in resumed state,
without executing runtime resume hooks. This means the power
domain runtime for AMBA shall during initialization be set to
a resumed state ad default.
Finally replace the ux500 specific suspend|resume_noirq functions
with the those from the AMBA bus.
Change-Id: Id1b9cab5c83063c7937d619ed71b8b54f00ec2b3
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34165
Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com>
|
|
Audio thread sees a significant delay in scheduling, if it get scheduled on the
cpu core1, right after core1 is brought online. Kepping core1 online solves this
problem. Power impact of keeping core1 online is negligible.
ST-Ericsson ID: 361756
ST-Ericsson Linux next: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Change-Id: I9ad0521123689e06906d4f55f25536043eb8fa32
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34624
Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Tested-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
|
|
There is no need to specify upper arm frequency bounds for low-power-audio and
voice-call. CPUFreq's statistics shows that when running at 400MHz, 95% of the
time frequency is not increased for these use-cases. Power figures for these
use-cases show no impact after removing upper bounds. Not having upper bounds
will prevent the CPU from chocking when a audio codec with higher mips
requirements is in use.
Moreover, instead of using lower arm frequency bounds, use PRCMU ARM QOS and
specify the required operating point.
ST-Ericsson ID: 361756
ST-Ericsson Linux next: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I629201af7c3dc143308c92aa4bb88a8341156824
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34278
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
|
|
IRDACLK needs to be requested from the firmware.
IRDACLK and IRRCCLK need to be parented to the SOC1 PLL.
ST-Ericsson ID: 361212
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Id336deda4639729dd5b847c168e52c05393c1bfc
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34593
Reviewed-by: QATOOLS
Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com>
|
|
The first fbdev update in board-xxx-mcde.c is not
needed. Screen will be updated at first fbdev pan.
ST-Ericsson ID: 365249, 361835
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I8055448e9be967530b783734473a32d579ba74fd
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34120
Reviewed-by: QATOOLS
Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Configures the HSI GPIO pins so that they have the correct direction
and level when the platform enters sleep (IOFORCE) and deep sleep
(forced pin configuration).
ST-Ericsson ID: 365658
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Iab2e7af5a1928d2cbdeb8833ab7334112528ac56
Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34610
Reviewed-by: Alex MACRO <alex.macro@stericsson.com>
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
ST-Ericsson Linux next: NA
ST-Ericsson ID: 338703
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Yas Parvizian <yas.parvizian@stericsson.com>
Change-Id: I42cca5d492c04090aa5d1ec1d81b5286cb8efafa
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32380
Tested-by: Christopher BLAIR <chris.blair@stericsson.com>
Reviewed-by: Alex MACRO <alex.macro@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
Add the correct devices which have all the platform data
related to power management.
ST-Ericsson ID: 361345
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I913d85ec7144e1f15e150cb365fbf1fdc54a4b97
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34637
Reviewed-by: QATOOLS
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This patch adds the PLLDSI and the two subclocks dsi{0,1}clk
to the U8500 clock tree.
ST Ericsson ID: 343004, 359227
ST Ericsson FOSS-OUT ID: trivial
Change-Id: I36b5a9b741da293b58ecd0bbeaf5678832104b34
Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34372
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
This patch updates clk_set_rate so that it only works for
disabled clocks, as well as making sure that it doesn't
interfere with itself at another depth of the clock tree.
ST Ericsson ID: 343004, 359227
ST Ericsson FOSS-OUT ID: trivial
Change-Id: I9dbf32f73e89f8f248e51b15097b50975b951a73
Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32967
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
This patch adds the DSI Escape clocks to the U8500
clock tree.
ST Ericsson ID: 343004, 359227
ST Ericsson FOSS-OUT ID: trivial
Change-Id: Ieead87a009fc36ccbfe91fc3e5b23ca431803925
Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32966
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I096faf6e6faa55b875dcac24f08473fadce5378b
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33870
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
|
|
A return value from schedule_delayed_work not equal to zero does not
mean failure, but the code in performance_register assumed so.
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ib8c822fdef98d721d37dcbb2fad278b7b3559610
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34377
Reviewed-by: QATOOLS
Reviewed-by: Per FORLIN <per.forlin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
ST-Ericsson ID: 366044
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Magnus Templing <magnus.templing@stericsson.com>
Change-Id: Ic1fdefcd437b7fb1caec5af43221ed01c8a2a0b7
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34428
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
SD-card, mipi34 and mipi60 IFs can be configured
for modem or ape trace, using u-boot cmd prompt.
STM drv is controlled via kernel environment vars:
Example:
stm.microsd=[none|modem|ape], or
stm.mipi34=[none|modem|ape], or
stm.mipi60=[none|modem|ape]
If trace set to ape, use
stm.stm_ter=N
to init STM_TER reg with decimal value N
(default: N=0).
ST-Ericsson ID: 349677
ST-Ericsson Linux next: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie04e4c004417c4542259e3074f1fa2fd4f00ce6d
Depends-On: I7bbcf263b83338d7b05413dd9dc0ac2ec4880601
Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34160
Reviewed-by: QATOOLS
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
The PRCMU_GPIOCR register modification within
STM driver is implemented via corresponding
API functions.
ST-Ericsson ID: 349677
ST-Ericsson Linux next: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7bbcf263b83338d7b05413dd9dc0ac2ec4880601
Depends-On: I5d3d0e069b0e8929b99fcfe9cb5e37a950caf716
Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33429
Reviewed-by: QATOOLS
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Removes num_channels, num_dsilinks and num_overlays from mcde
platform data in devices-db5500.c and devices-db8500.c
ST-Ericsson ID: 362765
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Ie345c910660dd2c657e02a3a3e281fd09af0e9bc
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33324
Reviewed-by: QATOOLS
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Based on a patch from Arnd Bergmann this fixes up the build
problem of assigning a non-existing global when the ux500 PRCMU
timer is not linked in by passing its base address to the init
function. We also add a missing <linux/errno.h> inclusion and
staticize the dummy function.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ST-Ericsson ID: 368260
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I87ec2eb27e157433fa12fb4eafc165a6217a869b
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34327
Reviewed-by: QATOOLS
Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Added the possibility to configure SysCl1kReqRfClkBuf - SysClk8ReqRfClkBuf
ST-Ericsson ID: 360052
ST-Ericsson Linux next: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7813ae4a73701d874e39556c60608ff66e1d016d
Signed-off-by: Kennet Wallden <kennet.wallden@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32261
Reviewed-by: Karl-Johan PERNTZ <karl-johan.perntz@stericsson.com>
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
|
|
Fixed problem introduced in commit:
ux500: camera_flash: add platform data for adp1653
Wrong pin configuration was set for camera flash enable pin.
It was set to 22 but should be 21. 22 is SD-card FBCLK pin.
Change-Id: Ibda29d091567a6cbecb6efbbb5ec97c6282f824b
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34324
|
|
Shift the rotation buffer address by 8k to free space for dma lcla area.
Do that for all displays.
ST-Ericsson ID: 364165
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I4bc5b72f6d198f26c7b48572cb3843d18c6b8553
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34168
Reviewed-by: Sylvain BARGE <sylvain.barge@stericsson.com>
Tested-by: Sylvain BARGE <sylvain.barge@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
On WD reboot gic is in some cases decoupled.
ST-Ericsson ID: 364267
Change-Id: Ie818710839a2aad674d93e20fbc5562ce44b4bc5
Signed-off-by: Marcus Danielsson <marcus.danielsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33898
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I860d9221dc79d6e5acd53c514d90a8eac57fb18a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33800
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
mcde_get_main_display is not used in the kernel.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I86b947e1273ba0a7340cee06cfa1d7d732d064b8
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33784
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
This adds the correct supply name for the
Cypress Touchscreen controller
ST-Ericsson ID: 366971
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7b1cc31220059edf946ead080a9ad1321d6277f2
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33832
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
pins.h didn't include <plat/pincfg.h> eventhough it used stuff
from there.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I120b2814118aa43323c95f429793a135af6a68d6
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33424
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Due to problem with multiple insertion of SD card in DMA mode
the dma support for SD cad is disabled temporarily.
ST-Ericsson Id: ER 365282
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic4bf04f5b3a7d4fe8c2e1d18be11308f5e7eb108
Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33785
Reviewed-by: QABUILD
Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Removes sony display driver specific data from board-xxx-mcde.c
ST-Ericsson ID: 321190
ST-Ericsson Linux Next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Ice61906fb359edf5ebd665e066c4b537312cb94b
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32718
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I606e9f3df286e7f8cd383e6840561ab9742d612c
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33680
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
performance.c fails to compile if CONFIG_MMC_BLOCK is not defined, so
place the code that depends on the MMC subsystem within #ifdefs.
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ieb4d560ad1c5089cad2da5ce0f7869dafd1acfe1
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33686
Reviewed-by: QABUILD
Reviewed-by: Per FORLIN <per.forlin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
So that modem logging over UART does not stop when
IOFORCE is enabled.
ST-Ericsson ID: 361345
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I179ebb419b21f84cc047dc06246bc0bfe443fb48
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33758
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|