summaryrefslogtreecommitdiff
path: root/arch/sh/boards
AgeCommit message (Collapse)Author
2010-05-31sh: Add support MMCIF for ecovecYusuke Goda
This patch adds MMCIF platform data for the Ecovec board. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-26sh: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/sh/boards/mach-ecovec24/setup.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: disable SD-card write-protection detection on kfr2r09Guennadi Liakhovetski
kfr2r09 board has a micro-SD card slot, therefore card write-protection detection cannot work there, disable it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to migorGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to kfr2r09Guennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to ms7724seGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to ecovecGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: add Video Output Unit (VOU) and AK8813 TV-encoder support to ms7724seGuennadi Liakhovetski
Add platform bindings, GPIO initialisation and allocation and AK8813 reset code to ms7724se. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: add Video Output Unit and AK8813 video encoder support on ecovecGuennadi Liakhovetski
Ecovec uses the AK8813 video envoder similarly to the ms7724se platform with the only difference, that on ecovec GPIOs are used for resetting and powering up and down the chip. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: Check return value of clk_get on ms7724Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: Check return value of clk_get on ecovec24Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: switch boards to clkdevMagnus Damm
This patch converts the remaining board clocks to use clkdev for lookup if needed. The unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-21sh: Move platform smp ops in to their own structure.Paul Mundt
This cribs the MIPS plat_smp_ops approach for wrapping up the platform ops. This will allow for mixing and matching different ops on the same platform in the future. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-19sh: mach-sdk7786: pm_power_off support.Paul Mundt
This wires up power-off support for the SDK7786 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: ms7724: Add tiny-document for soundKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_initKuninori Morimoto
i2c_put_adapter is needed after i2c_get_adapter Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02sh: Fix up ctrl_read/write stragglers in migor setup.Paul Mundt
ctrl_read/writeX are deprecated, this converts them over to their __raw_read/write() counterparts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02sh: audio support for the sh7722 Migo-R boardGuennadi Liakhovetski
Configure SIU port B pins and register the WM8978 audio codec. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26soc-camera: ov772x: Modify buswidth controlKuninori Morimoto
This patch removes "buswidth" struct member, and sets the default buswidth to the natively supported 10 bit. You can select 8 bit buswidth by new flag. This patch also modify ap325rxa/migor setup.c Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26sh: remove dead LED code for migo-r and ms7724seMagnus Damm
CONFIG_PM is always set on SH-Mobile these days so get rid of the unused LED setup code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec build fix for CONFIG_I2C=nMagnus Damm
Allow building the ecovec board support code even though I2C support is disabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec r-standby supportMagnus Damm
This patch adds board specific r-standby resume code for ecovec. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ms7724se r-standby supportMagnus Damm
This patch adds board specific r-standby resume code for ms7724se. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: ms7724: modify scan_timing for KEYSCKuninori Morimoto
KEYSC::SCN register of SH7724 is 3bit. Thus, scan_timing should be 0 - 7 here. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: ms7724: Add sh_sir supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: mach-ecovec24: Add sh_sir supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: sh7724: Update FSI/SPU2 clockKuninori Morimoto
When FSI and Network (= NFS file system) were used at the same time, the I/O of FSI was unstable. This patch updates the SPU2 clock (which is used for FSI) to solve this issue. Special thanks to Jeremy. Signed-off-by: Jeremy Baker <Jeremy.Baker@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: always enable sh7724 vpu_clk and set to 166MHz on EcovecMagnus Damm
Update the sh7724 processor code to always enable vpu_clk. On the Ecovec board, set the vpu_clk to 166 Mhz. The 166MHz setting results in a divide-by-6 setup for vpu_clk and improves the VPU performance compared to the power-on-reset/bootloader configuration. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7724/Ecovec24/KFR2R09/MS7724SE SDHI vector mergeMagnus Damm
Merge the SDHI vectors in the sh7724 INTC table and update the SDHI platform data for Ecovec24, KFR2R09 and MS7724SE. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7723/AP325 SDHI vector mergeMagnus Damm
Merge the SDHI vectors in the sh7723 INTC table and update the SDHI platform data for AP325. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7722/Migo-R SDHI vector mergeMagnus Damm
Merge the SDHI vectors in the sh7722 INTC table and update the SDHI platform data for Migo-R. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02sh: mach-dreamcast: Convert to sparseirq.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02sh: mach-se: Convert SH7724 solution engine FPGA to sparseirq.Paul Mundt
This uses the new create_irq_nr() to build up the FPGA's desired virtual IRQ mapping and permits us to finally flip on sparseirq for this board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02Merge branch 'sh/stable-updates'Paul Mundt
2010-01-30sh: mach-se: Fix up irq_desc reference.Paul Mundt
The irq_desc needs to be accessed with irq_to_desc(), this fixes up a build error with irq_desc being undefined. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-28sh: mach-titan: Kill off unused PIO port mangling.Paul Mundt
Nothing is using this, kill it off. Fixing up access sizes can be done with trapped I/O for anyone wanting to make use of this for devices that need it, everything else is already pure MMIO. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26sh: Mass ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: Probe system FPGA area mapping.Paul Mundt
This implements dynamic probing for the system FPGA. The system reset controller contains a fixed magic read word in order to identify the FPGA. This just utilizes a simple loop that scans across all of the fixed physical areas (area 0 through area 6) to locate the FPGA. The FPGA also contains register information detailing the area mappings and chip select settings for all of the other blocks, so this needs to be done before we can set up anything else. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: reset controller reboot support.Paul Mundt
This wires up the machine_ops reboot call to use the system reset controller. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: Split out FPGA IRQ controller setup.Paul Mundt
This moves out the FPGA IRQ controller setup code to its own file, in preparation for switching off of IRL mode and having it provide its own irq_chip. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: FPGA updates.Paul Mundt
This does a bit of refactoring of the FPGA management code. The primary FPGA initialization is moved out to its own file in preparation for implementing some of the more complex capabilities, a complete set of register definitions is provided, and all of the existing users in the board code are moved over to use the new interface instead of setting up overlapping mappings. This also corrects the FPGA size, which previously was chomped off at the SDIF control register. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: Fix up sdk7780 and urquell builds.Paul Mundt
These two got broken in the heartbeat private data conversion, fix them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: urquell: Handle EXTAL configuration here, too.Paul Mundt
urquell happens to use the same mode pins and EXTAL configuration as SDK7786, so just copy it over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: mach-sdk7786: Detect/configure/propagate EXTAL.Paul Mundt
This uses the mode pins exposed through the FPGA to work out whether we're driven from EXTAL or not and does the appropriate setup and propagation through the clock framework. This will also -EINVAL out for anyone adding in their own oscillators, forcing proper configuration with the clock framework instead of proceeding on with bogus clock values. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: Convert p3_ioremap() users to ioremap_prot().Paul Mundt
This kills off the ancient p3_ioremap(), converting over to the more generic ioremap_prot() instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: Prevent 64-bit pgprot clobbering across ioremap implementations.Paul Mundt
Presently 'flags' gets passed around a lot between the various ioremap helpers and implementations, which is only 32-bits. In the X2TLB case we use 64-bit pgprots which presently results in the upper 32bits being chopped off (which handily include our read/write/exec permissions). As such, we convert everything internally to using pgprot_t directly and simply convert over with pgprot_val() where needed. With this in place, transparent fixmap utilization for early ioremap works as expected. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18Merge branch 'sh/stable-updates'Paul Mundt
2010-01-18sh: ms7724: Correct sh-eth EEPROM polling timeout.Kuninori Morimoto
This converts the cpu_relax() to a udelay(1), which fixes up issues with the EEPROM polling occasionally timing out. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-16sh: Use ioremap_fixmed to map the SM501 DRAM config registerMatt Fleming
We need to write to the DRAM config register very early and at such an early stage ioremap() is not available. So use ioremap_fixed() to map the register. The reason that we are avoiding using the legacy P2 mapping is that there will come a day when the legacy P2 mappings no longer exist. Signed-off-by: Matt Fleming <matt@console-pimps.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 18:10:23 +0000