summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2011-09-19dmaengine/ste_dma40: use AMBA PrimeCell helper macrosLinus Walleij
The DMA40 is not a PrimeCell from ARM, but it still use the same ID registers. So let's utilize the existing macros in the PrimeCell header to identify manufacturer and revision of the IP block instead of reinventing the wheel. Cc: Robert Marklund <robert.marklund@stericsson.com> Cc: Per Forlin <per.forlin@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Change-Id: I2f6fbab5d572ed6655daa16aa07d0a524b68ed26 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/25894 Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Tested-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2011-09-19dmaengine/ste_dma40: allow memory buswidth/burst to be configuredRabin Vincent
Currently the runtime config implementation forces the memory side parameters to be the same as the peripheral side. Allow these to be different, and check for misconfiguration. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Reviewed-by: Per Forlin <per.forlin@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Robert Marklund <robert.marklund@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Change-Id: If3c1c91c8efa54ebbadb98f0c70532413514788c Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/25893 Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Tested-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2011-09-19kernel-doc: fix kernel-doc warningsom prakash
fix the potential kernel-doc warnings ST-Ericsson Linux next: - ST-Ericsson ID: 327425 ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: om prakash <omprakash.pal@stericsson.com> Change-Id: Ibaa302ddbaa8e223b81bd047fceaf7c3b97af491 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23345 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: QATEST Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-09-19dma: Make the cycic alloc NOWAITRobert Marklund
ST-Ericsson Linux next: OK ST-Ericsson ID: 342253 ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Change-Id: I7e792ed1d9d9c04d3af598caf30f1c26744c1183 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/24723 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2011-07-21Revert "Merge remote-tracking branch 'arm-soc/for-next' into linaro-3.0"Nicolas Pitre
This reverts commit c7e0c8535d73f8c5bf760926a2bd71c9840cf2ef, reversing changes made to dfee09c8acf18e84fe197bb5d821d1e4e02d020f. John Stultz reports that Panda doesn't boot anymore and 'git bisect' indicated the merge commit itself as the culprit. The resulting kernel log is: [ 1.734802] OMAP DSS rev 4.0 [ 1.740417] omap_hwmod: dss_core: _wait_target_disable failed [ 1.746429] omap_device: omapdss_dss.-1: new worst case deactivate latency 01 [ 1.755035] omapdss DISPC error: can't get dss_clk [ 1.760101] omapdss_dispc: probe of omapdss_dispc failed with error -2 [ 1.767333] omapdss HDMI error: can't get hdmi_clk [ 1.772399] omapdss_hdmi: probe of omapdss_hdmi failed with error -2 [ 1.780273] ------------[ cut here ]------------ [ 1.785125] WARNING: at drivers/video/omap2/dss/dispc.c:553dispc_runtime_ge) [ 1.793640] Modules linked in: [ 1.796905] ---[ end trace 6fcb132ac310d004 ]--- [ 1.801757] Unable to handle kernel NULL pointer dereference at virtualaddr0 [...] Revert it so a later version of the arm-soc merge result can be used instead.
2011-07-07dmaengine: imx-sdma: pass sdma firmware name via platform dataShawn Guo
It is not good to have cpu_name and to_version encoded into sdma firmware name as variables. For example, there are three TOs of imx51 soc, the sdma script never changes since TO1, which means all three TOs of imx51 uses TO1 version of sdma script. But we have to prepare three identical firmwares, sdma-imx51-to1.bin sdma-imx51-to2.bin and sdma-imx51-to3.bin, to have the kernel capable of running on all three TOs. The patch removes cpu_name and to_version from sdma platform data, and instead uses fw_name to pass the firmware name, so that we can pass the TO version where it's relevant and skip it where only one firmware exists. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX dma: Fix burstsize settingsSascha Hauer
dmaengine expects the maxburst parameter in words, not bytes. The imxdma driver and its users do this wrong. Fix this. As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work with imx-dma. This broke the driver with imx-sdma support which correctly takes the maxburst parameter in words. This patch puts the sdma based sound back to work. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-06-14dmaengine: shdma: SH_DMAC_MAX_CHANNELS message fixMagnus Damm
Fix the recently added SH_DMAC_MAX_CHANNELS handling code in 300e5f9 dmaengine: shdma: Fix SH_DMAC_MAX_CHANNELS handling Without this fix the shdma driver outputs silly messages in case SH_DMAC_MAX_CHANNELS happens to match the platform data: sh-dma-engine sh-dma-engine.0: Attempting to register 20 DMA channels when a max imum of 20 are supported. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02dmaengine: shdma: fix a regression: initialise DMA channels for memcpyGuennadi Liakhovetski
A recent patch has introduced a regression, where repeating a memcpy DMA test with shdma module unloading between them skips the DMA channel configuration. Fix this regression by always configuring the channel during its allocation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-31dmaengine: shdma: Fix up fallout from runtime PM changes.Paul Mundt
The runtime PM changes introduce sh_dmae_rst() wrapping via the runtime_resume helper, depending on dev_get_drvdata() to fetch the platform data needed for the DMAOR initialization default at a time where drvdata hasn't yet been established by the probe path, resulting in general probe misery: Unable to handle kernel NULL pointer dereference at virtual address 000000c4 pc = 8025adee *pde = 00000000 Oops: 0000 [#1] Modules linked in: Pid : 1, Comm: swapper CPU : 0 Not tainted (3.0.0-rc1-00012-g9436b4a-dirty #1456) PC is at sh_dmae_rst+0x28/0x86 PR is at sh_dmae_rst+0x22/0x86 PC : 8025adee SP : 9e803d10 SR : 400080f1 TEA : 000000c4 R0 : 000000c4 R1 : 0000fff8 R2 : 00000000 R3 : 00000040 R4 : 000000f0 R5 : 00000000 R6 : 00000000 R7 : 804f184c R8 : 00000000 R9 : 804dd0e8 R10 : 80283204 R11 : ffffffda R12 : 000000a0 R13 : 804dd18c R14 : 9e803d10 MACH: 00000000 MACL: 00008f20 GBR : 00000000 PR : 8025ade8 Call trace: [<8025ae70>] sh_dmae_runtime_resume+0x24/0x34 [<80283238>] pm_generic_runtime_resume+0x34/0x3c [<80283370>] rpm_callback+0x4a/0x7e [<80283efc>] rpm_resume+0x240/0x384 [<80283f54>] rpm_resume+0x298/0x384 [<8028428c>] __pm_runtime_resume+0x44/0x7c [<8038a358>] __ioremap_caller+0x0/0xec [<80284296>] __pm_runtime_resume+0x4e/0x7c [<8038a358>] __ioremap_caller+0x0/0xec [<80666254>] sh_dmae_probe+0x180/0x6a0 [<802803ae>] platform_drv_probe+0x26/0x2e Fix up the ordering accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-28Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (33 commits) x86: poll waiting for I/OAT DMA channel status maintainers: add dma engine tree details dmaengine: add TODO items for future work on dma drivers dmaengine: Add API documentation for slave dma usage dmaengine/dw_dmac: Update maintainer-ship dmaengine: move link order dmaengine/dw_dmac: implement pause and resume in dwc_control dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called dmaengine: at_hdmac: pause: no need to wait for FIFO empty pch_dma: modify pci device table definition pch_dma: Support new device ML7223 IOH pch_dma: Support I2S for ML7213 IOH pch_dma: Fix DMA setting issue pch_dma: modify for checkpatch pch_dma: fix dma direction issue for ML7213 IOH video-in dmaengine: at_hdmac: use descriptor chaining help function dmaengine: at_hdmac: implement pause and resume in atc_control ... Fix up trivial conflict in drivers/dma/dw_dmac.c
2011-05-26x86: poll waiting for I/OAT DMA channel statusDimitri Sivanich
For certain system configurations a 5 usec udelay before checking I/OAT DMA channel status is sometimes not sufficient, resulting in a false failure status and unnecessary freeing of channel resources. Conversely, for many configurations 5 usec is longer than necessary. Loop for up to 20 usec waiting for successful status before failing. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-05-26dmaengine: add TODO items for future work on dma driversVinod Koul
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-05-26mfd: Use mfd cell platform_data for timberdale cells platform bitsSamuel Ortiz
With the addition of a device platform mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25dmaengine/dw_dmac: Update maintainer-shipViresh Kumar
Nobody is currently maintaining dw_dmac. We are using dw_dmac for SPEAr13xx and are currently maintaining it. After discussing with Vinod, sending this patch to update maintainer-ship of dw_dmac. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-25dmaengine: shdma: Update SH_DMAC_MAX_CHANNELS to 20Magnus Damm
Update SH_DMAC_MAX_CHANNELS to support the 20 DMA channels included in the sh73a0 SY-DMAC hardware. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25dmaengine: shdma: Fix SH_DMAC_MAX_CHANNELS handlingMagnus Damm
Fix the shdma.c handing of SH_DMAC_MAX_CHANNELS to avoid overwriting the chan_irq[] and chan_flag[] arrays in the case of pdata->channel_num is larger than SH_DMAC_MAX_CHANNELS. With this patch applied up to SH_DMAC_MAX_CHANNELS will be used by the shdma.c driver. If more channels are available in the platform data the user will be notified on the console. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25dmaengine: shdma: Make second memory window optionalMagnus Damm
This patch makes the shdma.c driver allow slave operation on DMA hardware mapped with a single I/O-memory window. The dmae_set_dmars() function is adjusted to use the first memory window in case of a missing DMARS window. At probe() time the code is updated to enable DMA_SLAVE only if slave information is passed with the platform data. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23Merge branch 'sh-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Ignore R_SH_NONE module relocations. SH: SE7751: Fix pcibios_map_platform_irq prototype. sh: remove warning and warning_symbol from struct stacktrace_ops sh: wire up sys_sendmmsg. clocksource: sh_tmu: Runtime PM support clocksource: sh_tmu: __clocksource_updatefreq_hz() update clocksource: sh_cmt: Runtime PM support clocksource: sh_cmt: __clocksource_updatefreq_hz() update dmaengine: shdma: synchronize RCU before freeing, simplify spinlock dmaengine: shdma: add runtime- and system-level power management dmaengine: shdma: fix locking sh: sh-sci: sh7377 and sh73a0 build fixes sh: cosmetic improvement: use an existing pointer serial: sh-sci: suspend/resume wakeup support V2 serial: sh-sci: Runtime PM support sh: select IRQ_FORCED_THREADING. sh: intc: Set virtual IRQs as nothread. sh: fixup fpu.o compile order i2c: add a module alias to the sh-mobile driver ALSA: add a module alias to the FSI driver ...
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-22Add appropriate <linux/prefetch.h> include for prefetch usersPaul Gortmaker
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: Paul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23dmaengine: shdma: synchronize RCU before freeing, simplify spinlockGuennadi Liakhovetski
List elements, deleted using list_del_rcu(), cannot be freed without synchronising RCU. Further, the spinlock, used to protect the RCU writer, is called in process context, so, we don't have to save flags. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23dmaengine: shdma: add runtime- and system-level power managementGuennadi Liakhovetski
This patch extends and fixes runtime power management in the shdma driver to support powering down the DMA controller and adds support for system-level suspend and resume. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23dmaengine: shdma: fix lockingGuennadi Liakhovetski
Close multiple theoretical races, especially the one in .device_free_chan_resources(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-19dmaengine: move link orderLinus Walleij
Move the dmaengine subsystem up early in the drivers Makefile so DMA is made available early to all drivers, just like e.g. regulators. Now even regulators can use DMA on the same initlevel. As a result we can bump the ste_dma40 and coh901318 dmaengine drivers down one initlevel to subsys_init(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-18Haavard Skinnemoen has left AtmelJean Delvare
Haavard's e-mail address at Atmel is no longer valid. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-13dmaengine/dw_dmac: implement pause and resume in dwc_controlLinus Walleij
Some peripherals like amba-pl011 needs pause to be implemented in DMA controller drivers. This also returns correct status from dwc_tx_status() in case chan is paused. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable ↵Viresh Kumar
submission from callback dmaengine routines can be called from interrupt context and with interrupts disabled. Whereas spin_unlock_bh can't be called from such contexts. So this patch converts all spin_*_bh routines to irqsave variants. Also, spin_lock() used in tasklet is converted to irqsave variants, as tasklet can be interrupted, and dma requests from such interruptions may also call spin_lock. Now, submission from callbacks are permitted as per dmaengine framework. So we shouldn't hold any locks while calling callbacks. As locks were taken by parent routines, so releasing them before calling callbacks doesn't look clean enough. So, locks are taken inside all routine now, whereever they are required. And dwc_descriptor_complete is always called without taking locks. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than ↵Viresh Kumar
DWC_MAX_COUNT If len passed in sg for slave_sg transfers is greater than DWC_MAX_COUNT, then driver programmes controller incorrectly. This patch adds code to handle this situation by allocation more than one desc for same sg. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is ↵Viresh Kumar
!DMA_SUCCESS If transfer status is !=DMA_SUCCESS, return total transfer len as residue, instead of zero. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: don't call callback routine in case ↵Viresh Kumar
dmaengine_terminate_all() is called If dmaengine_terminate_all() is called for dma channel, then it doesn't make much sense to call registered callback routine. While in case of success or failure it must be called. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-12dmaengine: at_hdmac: pause: no need to wait for FIFO emptyNicolas Ferre
With the addition of the "pause" feature, an active wait was introduced to check the "FIFO empty" event. This event was not always happening and a timout contition was needed. But, in some cases, this event depend on the peripheral connected to the channel that is paused: FIFO becomes empty if the peripheral consumes data. The timeout is pretty difficult to evaluate. Moreover, this check is not needed. In conclusion, it seems sensible to entirely remove the checking of "FIFO empty" status when pausing. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [commit msg edited for grammer] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: modify pci device table definitionTomoya MORINAGA
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: Support new device ML7223 IOHTomoya MORINAGA
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: Support I2S for ML7213 IOHTomoya MORINAGA
Support I2S device for ML7213 IOH Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: Fix DMA setting issueTomoya MORINAGA
Currently, Direct-Start mode(*) is enabled. Our IOH's devices must not use this mode. This causes unexpected behavior. This patch deletes Direct-Start setting. (*) This mode is used in order for CPU to generate the DMA request. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: modify for checkpatchTomoya MORINAGA
Fix checkpatch warnings. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: fix dma direction issue for ML7213 IOH video-inTomoya MORINAGA
Currently, even-channel number is set as tx direction and odd is set as rx. However, though video-in uses ch6, the direction is not tx but rx. This patch sets video-in's DMA direction correctly. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine: at_hdmac: use descriptor chaining help functionNicolas Ferre
A little function helps to chain descriptors: it is already used in cyclic dma operations, now use it in memcpy and slave_sg preparation functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine: at_hdmac: implement pause and resume in atc_controlNicolas Ferre
Pause and resume controls are useful for audio devices. This also returns correct status from atc_tx_status() in case chan is paused. Idea from dw_dmac patch by Linus Walleij. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine: at_hdmac: set residue as total len in atc_tx_statusNicolas Ferre
If transfer status is !=DMA_SUCCESS, return total transfer len as residue, instead of zero. Idea from dw_dmac patch by Viresh Kumar. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine/ste_dma40: fix introduced warningsPhilippe Langlais
The compiler nowadays moans about possibly non-assigned variable. Fix this by default-assigning 0. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: specialize AHB interfaces to optimize transfersNicolas Ferre
DMA controller has two AHB interfaces on the SOC internal matrix. It is more efficient to specialize each interface as the access to memory can introduce latencies that are not compatible with peripheral accesses requirements. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: remove channel status testing in taskletNicolas Ferre
There is no need to test if channel is enabled in tasklet: - in error path, channel is disabled in interrupt routine - in normal path, this test is performed in sub functions to report a misuse of the engine. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: debug information sg_len for prep_slave_sgNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: add cyclic DMA operation supportNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: modify way to use interruptsNicolas Ferre
Now we use Buffer Transfer Completed interrupts. If we want a chained buffer completed information, we setup the ATC_IEN bit in CTRLB register in the lli. This is done by set_desc_eol() function and used by memcpy/slave_sg functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-04-26treewide: cleanup continuations and remove logging message whitespaceJoe Perches
Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-11Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: dt/fsldma: fix build warning caused by of_platform_device changes spi: Fix race condition in stop_queue() gpio/pch_gpio: Fix output value of pch_gpio_direction_output() gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output() gpio/pca953x: fix error handling path in probe() call
2011-04-10dt/fsldma: fix build warning caused by of_platform_device changesIra W. Snyder
Commit 000061245a6797d542854106463b6b20fbdcb12e, "dt/powerpc: Eliminate users of of_platform_{,un}register_driver" forgot to convert the type of structure passed into platform_device_register() when it was converted from of_platform_device_register. Fix it. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 14:59:06 +0000