summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-04-20net: s390: convert to hw_featuresMichał Mirosław
options.large_send was easy to get rid of. options.checksum_type has deeper roots so is left for later cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: infiniband/hw/nes: convert to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20Staging: convert hv network driver to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19be2net: add code to display default value of tx rate for VFsAjit Khaparde
This change will allow the default value of tx rate to be displayed when ip link show is called on a PF interface. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19be2net: pass domain id to be_cmd_link_status_queryAjit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19be2net: fix be_mcc_compl_process to identify eth_get_stat commandAjit Khaparde
eth_get_statistics and vlan_config command have same opcode. Use opcode subsystem id to differentiate one from other. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19be2net: Add code to display nic speeds other than 1Gbps/10GbpsAjit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19be2net: allow register dump only for PFsAjit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net:bna: fix compile warning of ‘bfa_ioc_smem_pgoff’ defined but not usedShan Wei
Fix the below compile warning: drivers/net/bna/bfa_ioc.c:1922: warning: ‘bfa_ioc_smem_pgoff’ defined but not used Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: forcedeth: fix compile warning of not used nv_set_tso functionShan Wei
Fix the below compile warning: drivers/net/forcedeth.c:4266: warning: ‘nv_set_tso’ defined but not used commit 569e146 converts forcedeth driver to use hw_features. So, implement function of .set_tso is abandoned. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_ethtool.c
2011-04-18net: qlge: convert to hw_featuresMichał Mirosław
Another simple conversion. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: vmxnet3: convert to hw_featuresMichał Mirosław
This also removes private feature flags that were always set to true. You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: vxge: convert to hw_featuresMichał Mirosław
Side effect: ->gro_enable is removed as napi_gro_receive() does the fallback itself. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: chelsio: convert to hw_featuresMichał Mirosław
Also remove flags that were not used or are now redundant to hw_features bits. No device had UDP_CSUM_CAPABLE set. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: s2io: convert to hw_featuresMichał Mirosław
This removes advertising HW_CSUM as driver does not support it. Note: driver advertises TSO6 but not IPV6_CSUM - bug maybe? Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: fix section mismatchesMichał Mirosław
Fix build warnings like the following: WARNING: drivers/net/built-in.o(.data+0x12434): Section mismatch in reference from the variable madgemc_driver to the variable .init.data:madgemc_adapter_ids And add some consts to EISA device ID tables along the way. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18r8169: TSO fixes.Francois Romieu
- the MSS value is actually contained in a 11 bits wide (0x7ff) field. The extra bit in the former MSSMask did encompass the TSO command bit ("LargeSend") as well (0xfff). Oops. - the Tx descriptor layout is not the same through the whole chipset family. The 8169 documentation, the 8168c documentation and Realtek's drivers (8.020.00, 1.019.00, 6.014.00) highlight two layouts: 1. 8169, 8168 up to 8168b (included) and 8101 2. {8102e, 8168c} and beyond - notwithstanding the "first descriptor" and "last descriptor" bits, the same Tx descriptor content is enforced when a packet consists of several descriptors. The chipsets are documented to require it. Credits go to David Dillow <dave@thedillows.org> for the original patch. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek <nic_swsd@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: myri10ge: convert to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jon Mason <jon.mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: dm9000: Fix buildMark Brown
Commit c88fcb (net: dm9000: convert to hw_features) broke the build of the dm9000 driver since it merged functions which use different names for the board info structure used for I/O operations without updating all the references to use the same name. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17bonding, ipv4, ipv6, vlan: Handle NETDEV_BONDING_FAILOVER like ↵Ben Hutchings
NETDEV_NOTIFY_PEERS It is undesirable for the bonding driver to be poking into higher level protocols, and notifiers provide a way to avoid that. This does mean removing the ability to configure reptitition of gratuitous ARPs and unsolicited NAs. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17bnx2x: cosmetics: Using ethtool_cmd_speed() APIDavid Decotigny
This updates bnx2x to use the ethtool_cmd_speed() family of functions (see b11f8d8c in 2.6.27-rc3 aka. "ethtool: Expand ethtool_cmd.speed to 32 bits") to get and set the link speed via ethtool. This allows to avoid manually accessing ethtool_cmd's speed_hi field. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17ip6_pol_route panic: Do not allow VLAN on loopbackKrishna Kumar
Several tests in the ipv6 routing code check IFF_LOOPBACK, and allowing stacking such as VLAN'ing on top of loopback results in a netdevice which reports IFF_LOOPBACK but really isn't the loopback device. Instead of spamming the ipv6 routing code with even more special tests, simply disallow VLAN over loopback. The result of this patch is: # modprobe 8021q # vconfig add lo 43 ERROR: trying to add VLAN #43 to IF -:lo:- error: Operation not supported Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17via-rhine: Assign random MAC address if necessaryJoe Perches
Roger Luethi has had several reports of Rhine NICs providing an invalid MAC address. If so, assign a random MAC address so the hardware can still be used. Tested as a standalone interface, as carrier for ppp, and as a bonding slave. Original-patch-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17via_rhine: Use netdev_<level> and pr_<level>Joe Perches
Use the more current logging styles. Add #define DEBUG to make netdev_dbg always active. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: cxgb4{,vf}: convert to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17bnx2x: Fix port identification problemYaniv Rosner
This patch fixes port identification on optic devices when there's no link on the port. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17drivers/net/usb/usbnet.c: Use FIELD_SIZEOF macro in usbnet_init() function.Thiago Farina
Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: ibm_newemac: convert to hw_featuresMichał Mirosław
Side effect: allow toggling of TX offloads. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: greth: convert to hw_featuresMichał Mirosław
Note: Driver modifies its struct net_device_ops. This will break if used for multiple devices that are not all the same (if that HW config is possible). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: niu: convert to hw_featuresMichał Mirosław
Side effect: allow toggling of TX offloads. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: ehea: convert to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: benet: convert to hw_features - fixupMichał Mirosław
Remove be_set_flags() as it's already covered by hw_features. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Ajit Khaparde ajit.khaparde@emulex.com Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: typhoon: convert to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: mv643xx: convert to hw_featuresMichał Mirosław
Side effect: don't reenable RXCSUM on every ifdown/ifup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: tehuti: convert to hw_featuresMichał Mirosław
As a side effect, make TX offloads changeable. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: cxgb3: convert to hw_featuresMichał Mirosław
This removes some of the remnants of LRO -> GRO conversion. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17net: macvlan: convert to hw_featuresMichał Mirosław
Not much of a conversion anyway - macvlan has no way to change the offload settings independently to its base device. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17be2net: Fix unused-but-set variables.David S. Miller
The variables 'tx_min' and 'tx_max' are set but not used in be_set_coalesce(). Similarly for 'region' in be_do_flash(). Just kill them off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: i4l: isdn_tty: Fix unused-but-set variables.David S. Miller
The variable 'fcr' is set but not used in isdn_tty_change_speed(). Just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17bnx2x: Fix set-but-unused variables.David S. Miller
The variable 'rc' is set but unused in bnx2x_timer(). Similarly for 'hc_index_p' in bnx2x_init_sb(), and 'port' in bnx2x_get_hwinfo(). Just kill them off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17bna: Fix set-but-unused variables.David S. Miller
The variable 'pgoff' is set but unused in bfa_nw_ioc_fwver_get() and bfa_ioc_download_fw(). Similarly for 'cmd_h' in bna_mbox_flush_q and the entirety of bna_rit_mod_uninit() is unused since variables are purely set but no action is made using them. Same for 'bna' in bna_rit_create() and 'ret' in bna_rx_create(). Just kill them off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: mISDN: socket: Fix set-but-unused variables.David S. Miller
The variable 'len' is set but unused in data_sock_getsockopt(). The code should use 'len' to validate that the user's socket option is indeed the right size. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: i4l: isdn_net: Fix set-but-unused variables.David S. Miller
The variable 'unused' is set but unused in isdn_net_ciscohdlck_slarp_in(). Just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: i4l: isdn_common: Fix set-but-unused variables.David S. Miller
The variable 'ch' is set but unused in isdn_capi_rec_hl_msg(). Just kill it off. Similarly for 'chidx' in isdn_ioctl() and 'di' in isdn_capi_rec_hl_msg(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: teles_cs: Fix set-but-unused variables.David S. Miller
The variable 'dev' is set but unused in teles_cs_config(). Just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: l3ni1: Fix set-but-unused variables.David S. Miller
The variable 'cause' is set but unused in ni1up(). Just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: l3dss1: Fix set-but-unused variables.David S. Miller
The variable 'cause' is set but unused in dss1up(). Just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: jade: Fix set-but-unused variables.David S. Miller
The variable 'i' is set but unused in JadeVersion(). Just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17isdn: ipacx: Fix set-but-unused variables.David S. Miller
The variable 'cda2_cr' is set but unused in ctrl_complete(). Just kill it off. Keep the cs->readisac() call just in case the register read has side effects. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-12 12:09:25 +0000