summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2007-10-18Replace __attribute_pure__ with __pureRalf Baechle
To be consistent with the use of attributes in the rest of the kernel replace all use of __attribute_pure__ with __pure and delete the definition of __attribute_pure__. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [SCSI] Remove full sg table memset() [SCSI] ide-scsi: remove usage of sg_last() Fix loop terminating conditions in fill_sg(). [BLOCK] Clear sg entry before filling in blk_rq_map_sg() IA64: iommu uses sg_next with an invalid sg element cciss: disable DMA refetch on Smart Array P600 swiotlb: fix map_sg failure handling SPARC64: fix iommu sg chaining [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17lib/iomap.c:bad_io_access(): print 0x hex prefixRene Herman
Be explicit about printing hex. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17avoid negative (and full-width) shifts in radix-tree.cPeter Lund
Negative shifts are not allowed in C (the result is undefined). Same thing with full-width shifts. It works on most platforms but not on the VAX with gcc 4.0.1 (it results in an "operand reserved" fault). Shifting by more than the width of the value on the left is also not allowed. I think the extra '>> 1' tacked on at the end in the original code was an attempt to work around that. Getting rid of that is an extra feature of this patch. Here's the chapter and verse, taken from the final draft of the C99 standard ("6.5.7 Bitwise shift operators", paragraph 3): "The integer promotions are performed on each of the operands. The type of the result is that of the promoted left operand. If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined." Thank you to Jan-Benedict Glaw, Christoph Hellwig, Maciej Rozycki, Pekka Enberg, Andreas Schwab, and Christoph Lameter for review. Special thanks to Andreas for spotting that my fix only removed half the undefined behaviour. Signed-off-by: Peter Lund <firefly@vax64.dk> Christoph Lameter <clameter@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andreas Schwab <schwab@suse.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: WU Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17handle recursive calls to bust_spinlocks()Jan Beulich
Various architectures may call bust_spinlocks() recursively; the function itself, however, doesn't appear to be meant to be called in this manner. Nevertheless, this doesn't appear to be a problem as long as bust_spinlocks(0) doesn't get called twice in a row (otherwise, unblank_screen() may enter the scheduler). However, at least on i386 die() has been capable of returning (and on other architectures this should really be that way, too) when notify_die() returns NOTIFY_STOP. Short of getting a reply to a respective query, this patch makes bust_spinlocks() increment/decrement oops_in_progress, and wake klogd only when the count drops back to zero. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib/sort.c optimizationSubbaiah Venkata
Hello, I fixed and tested a small bug in lib/sort.c file, heap sort function. The fix avoids unnecessary swap of contents when i is 0 (saves few loads and stores), which happens every time sort function is called. I felt the fix is worth bringing it to your attention given the importance and frequent use of the sort function. Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib/ioremap.c should #include <linux/io.h>Adrian Bunk
Every file should include the headers containing the prototypes for its global functions (in this case ioremap_page_range()). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17argv_split: allow argv_split to handle NULL pointer in argcp parameter ↵Neil Horman
gracefully It would be nice if the argv_split library function could gracefully handle a NULL pointer in the argcp parameter, so as to allow functions using it that did not care about the value of argc to not have to declare a useless variable. This patch accomplishes that. Tested by me, with successful results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Satyam Sharma <satyam@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: floating proportionsPeter Zijlstra
Given a set of objects, floating proportions aims to efficiently give the proportional 'activity' of a single item as compared to the whole set. Where 'activity' is a measure of a temporal property of the items. It is efficient in that it need not inspect any other items of the set in order to provide the answer. It is not even needed to know how many other items there are. It has one parameter, and that is the period of 'time' over which the 'activity' is measured. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_init_irqPeter Zijlstra
provide a way to tell lockdep about percpu_counters that are supposed to be used from irq safe contexts. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_init error handlingPeter Zijlstra
alloc_percpu can fail, propagate that error. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_count_sum()Peter Zijlstra
Provide an accurate version of percpu_counter_read. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_sum_positivePeter Zijlstra
s/percpu_counter_sum/&_positive/ Because its consitent with percpu_counter_read* Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_setPeter Zijlstra
Provide a method to set a percpu counter to a specified value. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: make percpu_counter_add take s64Peter Zijlstra
percpu_counter is a s64 counter, make _add consitent. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter variable batchPeter Zijlstra
Because the current batch setup has an quadric error bound on the counter, allow for an alternative setup. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_addPeter Zijlstra
s/percpu_counter_mod/percpu_counter_add/ Because its a better name, _mod implies modulo. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17swiotlb: fix map_sg failure handlingFUJITA Tomonori
sg list elements might not be continuous. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
2007-10-16Group short-lived and reclaimable kernel allocationsMel Gorman
This patch marks a number of allocations that are either short-lived such as network buffers or are reclaimable such as inode allocations. When something like updatedb is called, long-lived and unmovable kernel allocations tend to be spread throughout the address space which increases fragmentation. This patch groups these allocations together as much as possible by adding a new MIGRATE_TYPE. The MIGRATE_RECLAIMABLE type is for allocations that can be reclaimed on demand, but not moved. i.e. they can be migrated by deleting them and re-reading the information from elsewhere. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fix the max path calculation in radix-tree.cJeff Moyer
A while back, Nick Piggin introduced a patch to reduce the node memory usage for small files (commit cfd9b7df4abd3257c9e381b0e445817b26a51c0c): -#define RADIX_TREE_MAP_SHIFT 6 +#define RADIX_TREE_MAP_SHIFT (CONFIG_BASE_SMALL ? 4 : 6) Unfortunately, he didn't take into account the fact that the calculation of the maximum path was based on an assumption of having to round up: #define RADIX_TREE_MAX_PATH (RADIX_TREE_INDEX_BITS/RADIX_TREE_MAP_SHIFT + 2) So, if CONFIG_BASE_SMALL is set, you will end up with a RADIX_TREE_MAX_PATH that is one greater than necessary. The practical upshot of this is just a bit of wasted memory (one long in the height_to_maxindex array, an extra pre-allocated radix tree node per cpu, and extra stack usage in a couple of functions), but it seems worth getting right. It's also worth noting that I never build with CONFIG_BASE_SMALL. What I did to test this was duplicate the code in a small user-space program and check the results of the calculations for max path and the contents of the height_to_maxindex array. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16radix-tree: use indirect bitNick Piggin
Rather than sign direct radix-tree pointers with a special bit, sign the indirect one that hangs off the root. This means that, given a lookup_slot operation, the invalid result will be differentiated from the valid (previously, valid results could have the bit either set or clear). This does not affect slot lookups which occur under lock -- they can never return an invalid result. Is needed in future for lockless pagecache. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16radixtree: introduce radix_tree_next_hole()Fengguang Wu
Introduce radix_tree_next_hole(root, index, max_scan) to scan radix tree for the first hole. It will be used in interleaved readahead. The implementation is dumb and obviously correct. It can help debug(and document) the possible smart one in future. Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16slow down printk during bootRandy Dunlap
Optionally add a boot delay after each kernel printk() call, crudely measured in milliseconds, with a maximum delay of 10 seconds per printk. Enable CONFIG_BOOT_PRINTK_DELAY=y and then add (e.g.): "lpj=loops_per_jiffy boot_delay=100" to the kernel command line. It has been useful in cases like "during boot, my machine just reboots or the screen goes black" by slowing down printk, (and adding initcall_debug), we can usually see the last thing that happened before the lights went out which is usually a valuable clue. [akpm@linux-foundation.org: not all architectures implement CONFIG_HZ] [akpm@linux-foundation.org: fix lots of stuff] [bunk@stusta.de: kernel/printk.c: make 2 variables static] [heiko.carstens@de.ibm.com: fix slow down printk on boot compile error] Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16swiotlb: sg chaining supportJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-14more low-hanging fruits - kernel, fs, lib signednessAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits) PCI: merge almost all of pci_32.h and pci_64.h together PCI: X86: Introduce and enable PCI domain support PCI: Add 'nodomains' boot option, and pci_domains_supported global PCI: modify PCI bridge control ISA flag for clarity PCI: use _CRS for PCI resource allocation PCI: avoid P2P prefetch window for expansion ROMs PCI: skip ISA ioresource alignment on some systems PCI: remove transparent bridge sizing pci: write file size to inode on proc bus file write pci: use size stored in proc_dir_entry for proc bus files pci: implement "pci=noaer" PCI: fix IDE legacy mode resources MSI: Use correct data offset for 32-bit MSI in read_msi_msg() PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code PCI: i386: Compaq EVO N800c needs PCI bus renumbering PCI: Remove no longer correct documentation regarding MSI vector assignment PCI: re-enable onboard sound on "MSI K8T Neo2-FIR" PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read ...
2007-10-12dma_free_coherent() needs irqs enabled (sigh)David Brownell
On at least ARM (and I'm told MIPS too) dma_free_coherent() has a newish call context requirement: unlike its dma_alloc_coherent() sibling, it may not be called with IRQs disabled. (This was new behavior on ARM as of late 2005, caused by ARM SMP updates.) This little surprise can be annoyingly driver-visible. Since it looks like that restriction won't be removed, this patch changes the definition of the API to include that requirement. Also, to help catch nonportable drivers, it updates the x86 and swiotlb versions to include the relevant warnings. (I already observed that it trips on the bus_reset_tasklet of the new firewire_ohci driver.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: David Miller <davem@davemloft.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12kobject: update the copyrightsGreg Kroah-Hartman
I've been hacking on these files for a while now, might as well make it official... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12driver core: remove subsystem_init()Greg Kroah-Hartman
There is only one user of it, and it is only a wrapper for kset_init(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12sysfs: move sysfs file poll implementation to sysfs_open_direntTejun Heo
Sysfs file poll implementation is scattered over sysfs and kobject. Event numbering is done in sysfs_dirent but wait itself is done on kobject. This not only unecessarily bloats both kobject and sysfs_dirent but is also buggy - if a sysfs_dirent is removed while there still are pollers, the associaton betwen the kobject and sysfs_dirent breaks and kobject may be freed with the pollers still sleeping on it. This patch moves whole poll implementation into sysfs_open_dirent. Each time a sysfs_open_dirent is created, event number restarts from 1 and pollers sleep on sysfs_open_dirent. As event sequence number is meaningless without any open file and pollers should have open file and thus sysfs_open_dirent, this ephemeral event counting works and is a saner implementation. This patch fixes the dnagling sleepers bug and reduces the sizes of kobject and sysfs_dirent by one pointer. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: kerneldoc - kobject_uevent_env is not "usually KOBJ_MOVE"Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: exclude kobject_uevent.c for !CONFIG_HOTPLUGKay Sievers
Move uevent specific logic from the core into kobject_uevent.c, which does no longer require to link the unused string array if hotplug is not compiled in. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12sysfs: Remove first pass at shadow directory supportEric W. Biederman
While shadow directories appear to be a good idea, the current scheme of controlling their creation and destruction outside of sysfs appears to be a locking and maintenance nightmare in the face of sysfs directories dynamically coming and going. Which can now occur for directories containing network devices when CONFIG_SYSFS_DEPRECATED is not set. This patch removes everything from the initial shadow directory support that allowed the shadow directory creation to be controlled at a higher level. So except for a few bits of sysfs_rename_dir everything from commit b592fcfe7f06c15ec11774b5be7ce0de3aa86e73 is now gone. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12kobject: remove the static array for the nameGreg Kroah-Hartman
Due to historical reasons, struct kobject contained a static array for the name, and a dynamic pointer in case the name got bigger than the array. That's just dumb, as people didn't always know which variable to reference, even with the accessor for the kobject name. This patch removes the static array, potentially saving a lot of memory as the majority of kobjects do not have a very long name. Thanks to Kay for the idea to do this. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: remove subsys_get()Greg Kroah-Hartman
There are no more subsystems, it's a kset now so remove the function and the only two users, which are in the driver core. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: remove subsys_put()Greg Kroah-Hartman
There are no more subsystems, it's a kset now so remove the function and the only two users, which are in the driver core. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: add CONFIG_UEVENT_HELPER_PATHKay Sievers
The kernel creates a process for every event that is send, even when there is no binary it could execute. We are needlessly creating around 200-300 failing processes during early bootup, until we have the chance to disable it from userspace. This change allows us to disable /sbin/hotplug entirely, if you want to, by setting UEVENT_HELPER_PATH="" in the kernel config. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11[ZLIB]: Fix external builds of zlib_inflate code.David S. Miller
Move zlib_inflate_blob() out into it's own source file, infutil.c, so that things like the powerpc zImage builder in arch/powerpc/boot/Makefile don't end up trying to compile it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-10[ZLIB]: Move bnx2 driver gzip unpacker into zlib.Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Support multiple network namespaces with netlinkEric W. Biederman
Each netlink socket will live in exactly one network namespace, this includes the controlling kernel sockets. This patch updates all of the existing netlink protocols to only support the initial network namespace. Request by clients in other namespaces will get -ECONREFUSED. As they would if the kernel did not have the support for that netlink protocol compiled in. As each netlink protocol is updated to be multiple network namespace safe it can register multiple kernel sockets to acquire a presence in the rest of the network namespaces. The implementation in af_netlink is a simple filter implementation at hash table insertion and hash table look up time. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07Move kasprintf.o to obj-yAlexey Dobriyan
Modulat lguest started giving linking errors MODPOST 1 modules ERROR: "kasprintf" [drivers/lguest/lg.ko] undefined! Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07lockstat: documentationPeter Zijlstra
Provide some documentation for CONFIG_LOCK_STAT. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-03Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-10-03[POWERPC] ppc64: support CONFIG_DEBUG_PREEMPTHugh Dickins
Add CONFIG_DEBUG_PREEMPT support to ppc64: it was useful for testing get_paca() preemption. Cheat a little, just use debug_smp_processor_id() in the debug version of get_paca(): it contains all the right checks and reporting, though get_paca() doesn't really use smp_processor_id(). Use local_paca for what might have been called __raw_get_paca(). Silence harmless warnings from io.h and lparcfg.c with local_paca - it is okay for iseries_lparcfg_data to be referencing shared_proc with preemption enabled: all cpus should show the same value for shared_proc. Why do other architectures need TRACE_IRQFLAGS_SUPPORT for DEBUG_PREEMPT? I don't know, ppc64 appears to get along fine without it. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-25typo fix Kernel config optionDanny ter Haar
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-23Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Run k8t_sound_hostbridge quirk only when needed PCI: disable MSI on RX790 PCI: disable MSI on RD580 PCI: disable MSI on RS690 PCI: make pcie_get_readrq visible in pci.h PCI: lets kill the 'PCI hidden behind bridge' message pci/hotplug/cpqphp_ctrl.c: remove stale BKL use PCI: Document pci_iomap() PCI: quirk_e100_interrupt() called too early PCI: Move prototypes for pci_bus_find_capability to include/linux/pci.h