From f6d57916db2009bd7e220472200cd131fc010d64 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 10 Oct 2005 22:13:53 +1000 Subject: powerpc: rename powermac files to remove pmac_ prefix Since the files are now in arch/powerpc/platforms/powermac, the pmac_ prefix that they had is redundant. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/pci.c | 1341 +++++++++++++++++++++++++++++++++ 1 file changed, 1341 insertions(+) create mode 100644 arch/powerpc/platforms/powermac/pci.c (limited to 'arch/powerpc/platforms/powermac/pci.c') diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c new file mode 100644 index 00000000000..40bcd3e55af --- /dev/null +++ b/arch/powerpc/platforms/powermac/pci.c @@ -0,0 +1,1341 @@ +/* + * Support for PCI bridges found on Power Macintoshes. + * At present the "bandit" and "chaos" bridges are supported. + * Fortunately you access configuration space in the same + * way with either bridge. + * + * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) + * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static int add_bridge(struct device_node *dev); +extern void pmac_check_ht_link(void); + +/* XXX Could be per-controller, but I don't think we risk anything by + * assuming we won't have both UniNorth and Bandit */ +static int has_uninorth; +#ifdef CONFIG_POWER4 +static struct pci_controller *u3_agp; +#endif /* CONFIG_POWER4 */ + +extern u8 pci_cache_line_size; +extern int pcibios_assign_bus_offset; + +struct device_node *k2_skiplist[2]; + +/* + * Magic constants for enabling cache coherency in the bandit/PSX bridge. + */ +#define BANDIT_DEVID_2 8 +#define BANDIT_REVID 3 + +#define BANDIT_DEVNUM 11 +#define BANDIT_MAGIC 0x50 +#define BANDIT_COHERENT 0x40 + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node != 0;node = node->sibling) { + int * bus_range; + unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = (unsigned int *) get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = (int *) get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int * bus_range; + int len; + + /* Lookup the "bus-range" property for the hose */ + bus_range = (int *) get_property(bridge, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + bridge->full_name); + return; + } + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + +/* + * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. + * + * The "Bandit" version is present in all early PCI PowerMacs, + * and up to the first ones using Grackle. Some machines may + * have 2 bandit controllers (2 PCI busses). + * + * "Chaos" is used in some "Bandit"-type machines as a bridge + * for the separate display bus. It is accessed the same + * way as bandit, but cannot be probed for devices. It therefore + * has its own config access functions. + * + * The "UniNorth" version is present in all Core99 machines + * (iBook, G4, new IMacs, and all the recent Apple machines). + * It contains 3 controllers in one ASIC. + * + * The U3 is the bridge used on G5 machines. It contains an + * AGP bus which is dealt with the old UniNorth access routines + * and a HyperTransport bus which uses its own set of access + * functions. + */ + +#define MACRISC_CFA0(devfn, off) \ + ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ + | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned long)(off)) & 0xFCUL)) + +#define MACRISC_CFA1(bus, devfn, off) \ + ((((unsigned long)(bus)) << 16) \ + |(((unsigned long)(devfn)) << 8) \ + |(((unsigned long)(off)) & 0xFCUL) \ + |1UL) + +static unsigned long macrisc_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, u8 offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + if (dev_fn < (11 << 3)) + return 0; + caddr = MACRISC_CFA0(dev_fn, offset); + } else + caddr = MACRISC_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= has_uninorth ? 0x07 : 0x03; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops macrisc_pci_ops = +{ + macrisc_read_config, + macrisc_write_config +}; + +/* + * Verifiy that a specific (bus, dev_fn) exists on chaos + */ +static int +chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) +{ + struct device_node *np; + u32 *vendor, *device; + + np = pci_busdev_to_OF_node(bus, devfn); + if (np == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + vendor = (u32 *)get_property(np, "vendor-id", NULL); + device = (u32 *)get_property(np, "device-id", NULL); + if (vendor == NULL || device == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10) + && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +static int +chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + int result = chaos_validate_dev(bus, devfn, offset); + if (result == PCIBIOS_BAD_REGISTER_NUMBER) + *val = ~0U; + if (result != PCIBIOS_SUCCESSFUL) + return result; + return macrisc_read_config(bus, devfn, offset, len, val); +} + +static int +chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + int result = chaos_validate_dev(bus, devfn, offset); + if (result != PCIBIOS_SUCCESSFUL) + return result; + return macrisc_write_config(bus, devfn, offset, len, val); +} + +static struct pci_ops chaos_pci_ops = +{ + chaos_read_config, + chaos_write_config +}; + +#ifdef CONFIG_POWER4 + +/* + * These versions of U3 HyperTransport config space access ops do not + * implement self-view of the HT host yet + */ + +/* + * This function deals with some "special cases" devices. + * + * 0 -> No special case + * 1 -> Skip the device but act as if the access was successfull + * (return 0xff's on reads, eventually, cache config space + * accesses in a later version) + * -1 -> Hide the device (unsuccessful acess) + */ +static int u3_ht_skip_device(struct pci_controller *hose, + struct pci_bus *bus, unsigned int devfn) +{ + struct device_node *busdn, *dn; + int i; + + /* We only allow config cycles to devices that are in OF device-tree + * as we are apparently having some weird things going on with some + * revs of K2 on recent G5s + */ + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = hose->arch_data; + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->data && PCI_DN(dn)->devfn == devfn) + break; + if (dn == NULL) + return -1; + + /* + * When a device in K2 is powered down, we die on config + * cycle accesses. Fix that here. + */ + for (i=0; i<2; i++) + if (k2_skiplist[i] == dn) + return 1; + + return 0; +} + +#define U3_HT_CFA0(devfn, off) \ + ((((unsigned long)devfn) << 8) | offset) +#define U3_HT_CFA1(bus, devfn, off) \ + (U3_HT_CFA0(devfn, off) \ + + (((unsigned long)bus) << 16) \ + + 0x01000000UL) + +static unsigned long u3_ht_cfg_access(struct pci_controller* hose, + u8 bus, u8 devfn, u8 offset) +{ + if (bus == hose->first_busno) { + /* For now, we don't self probe U3 HT bridge */ + if (PCI_SLOT(devfn) == 0) + return 0; + return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); + } else + return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + struct device_node *np = pci_busdev_to_OF_node(bus, devfn); + if (np == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + switch (len) { + case 1: + *val = 0xff; break; + case 2: + *val = 0xffff; break; + default: + *val = 0xfffffffful; break; + } + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + struct device_node *np = pci_busdev_to_OF_node(bus, devfn); + if (np == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + u3_ht_read_config, + u3_ht_write_config +}; + +#endif /* CONFIG_POWER4 */ + +/* + * For a bandit bridge, turn on cache coherency if necessary. + * N.B. we could clean this up using the hose ops directly. + */ +static void __init +init_bandit(struct pci_controller *bp) +{ + unsigned int vendev, magic; + int rev; + + /* read the word at offset 0 in config space for device 11 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID); + udelay(2); + vendev = in_le32(bp->cfg_data); + if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) + + PCI_VENDOR_ID_APPLE) { + /* read the revision id */ + out_le32(bp->cfg_addr, + (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID); + udelay(2); + rev = in_8(bp->cfg_data); + if (rev != BANDIT_REVID) + printk(KERN_WARNING + "Unknown revision %d for bandit\n", rev); + } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) { + printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); + return; + } + + /* read the word at offset 0x50 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC); + udelay(2); + magic = in_le32(bp->cfg_data); + if ((magic & BANDIT_COHERENT) != 0) + return; + magic |= BANDIT_COHERENT; + udelay(2); + out_le32(bp->cfg_data, magic); + printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); +} + + +/* + * Tweak the PCI-PCI bridge chip on the blue & white G3s. + */ +static void __init +init_p2pbridge(void) +{ + struct device_node *p2pbridge; + struct pci_controller* hose; + u8 bus, devfn; + u16 val; + + /* XXX it would be better here to identify the specific + PCI-PCI bridge chip we have. */ + if ((p2pbridge = find_devices("pci-bridge")) == 0 + || p2pbridge->parent == NULL + || strcmp(p2pbridge->parent->name, "pci") != 0) + return; + if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { + DBG("Can't find PCI infos for PCI<->PCI bridge\n"); + return; + } + /* Warning: At this point, we have not yet renumbered all busses. + * So we must use OF walking to find out hose + */ + hose = pci_find_hose_for_OF_device(p2pbridge); + if (!hose) { + DBG("Can't find hose for PCI<->PCI bridge\n"); + return; + } + if (early_read_config_word(hose, bus, devfn, + PCI_BRIDGE_CONTROL, &val) < 0) { + printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n"); + return; + } + val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; + early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); +} + +/* + * Some Apple desktop machines have a NEC PD720100A USB2 controller + * on the motherboard. Open Firmware, on these, will disable the + * EHCI part of it so it behaves like a pair of OHCI's. This fixup + * code re-enables it ;) + */ +static void __init +fixup_nec_usb2(void) +{ + struct device_node *nec; + + for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) { + struct pci_controller *hose; + u32 data, *prop; + u8 bus, devfn; + + prop = (u32 *)get_property(nec, "vendor-id", NULL); + if (prop == NULL) + continue; + if (0x1033 != *prop) + continue; + prop = (u32 *)get_property(nec, "device-id", NULL); + if (prop == NULL) + continue; + if (0x0035 != *prop) + continue; + prop = (u32 *)get_property(nec, "reg", NULL); + if (prop == NULL) + continue; + devfn = (prop[0] >> 8) & 0xff; + bus = (prop[0] >> 16) & 0xff; + if (PCI_FUNC(devfn) != 0) + continue; + hose = pci_find_hose_for_OF_device(nec); + if (!hose) + continue; + early_read_config_dword(hose, bus, devfn, 0xe4, &data); + if (data & 1UL) { + printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n"); + data &= ~1UL; + early_write_config_dword(hose, bus, devfn, 0xe4, data); + early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE, + nec->intrs[0].line); + } + } +} + +void __init +pmac_find_bridges(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "bandit") == 0 + || strcmp(np->name, "chaos") == 0 + || strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Probe HT last as it relies on the agp resources to be already + * setup + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + init_p2pbridge(); + fixup_nec_usb2(); + + /* We are still having some issues with the Xserve G4, enabling + * some offset between bus number and domains for now when we + * assign all busses should help for now + */ + if (pci_assign_all_busses) + pcibios_assign_bus_offset = 0x10; + +#ifdef CONFIG_POWER4 + /* There is something wrong with DMA on U3/HT. I haven't figured out + * the details yet, but if I set the cache line size to 128 bytes like + * it should, I'm getting memory corruption caused by devices like + * sungem (even without the MWI bit set, but maybe sungem doesn't + * care). Right now, it appears that setting up a 64 bytes line size + * works properly, 64 bytes beeing the max transfer size of HT, I + * suppose this is related the way HT/PCI are hooked together. I still + * need to dive into more specs though to be really sure of what's + * going on. --BenH. + * + * Ok, apparently, it's just that HT can't do more than 64 bytes + * transactions. MWI seem to be meaningless there as well, it may + * be worth nop'ing out pci_set_mwi too though I haven't done that + * yet. + * + * Note that it's a bit different for whatever is in the AGP slot. + * For now, I don't care, but this can become a real issue, we + * should probably hook pci_set_mwi anyway to make sure it sets + * the real cache line size in there. + */ + if (machine_is_compatible("MacRISC4")) + pci_cache_line_size = 16; /* 64 bytes */ + + pmac_check_ht_link(); +#endif /* CONFIG_POWER4 */ +} + +#define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \ + | (((o) & ~3) << 24)) + +#define GRACKLE_PICR1_STG 0x00000040 +#define GRACKLE_PICR1_LOOPSNOOP 0x00000010 + +/* N.B. this is called before bridges is initialized, so we can't + use grackle_pcibios_{read,write}_config_dword. */ +static inline void grackle_set_stg(struct pci_controller* bp, int enable) +{ + unsigned int val; + + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + val = in_le32(bp->cfg_data); + val = enable? (val | GRACKLE_PICR1_STG) : + (val & ~GRACKLE_PICR1_STG); + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + out_le32(bp->cfg_data, val); + (void)in_le32(bp->cfg_data); +} + +static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable) +{ + unsigned int val; + + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + val = in_le32(bp->cfg_data); + val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) : + (val & ~GRACKLE_PICR1_LOOPSNOOP); + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + out_le32(bp->cfg_data, val); + (void)in_le32(bp->cfg_data); +} + +static int __init +setup_uninorth(struct pci_controller* hose, struct reg_property* addr) +{ + pci_assign_all_busses = 1; + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + /* We "know" that the bridge at f2000000 has the PCI slots. */ + return addr->address == 0xf2000000; +} + +static void __init +setup_bandit(struct pci_controller* hose, struct reg_property* addr) +{ + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + init_bandit(hose); +} + +static void __init +setup_chaos(struct pci_controller* hose, struct reg_property* addr) +{ + /* assume a `chaos' bridge */ + hose->ops = &chaos_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); +} + +#ifdef CONFIG_POWER4 + +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_busses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u3_agp = hose; +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + struct device_node *np = (struct device_node *)hose->arch_data; + int i, cur; + + hose->ops = &u3_ht_pci_ops; + + /* We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + + /* + * /ht node doesn't expose a "ranges" property, so we "remove" regions that + * have been allocated to AGP. So far, this version of the code doesn't assign + * any of the 0xfxxxxxxx "fine" memory regions to /ht. + * We need to fix that sooner or later by either parsing all child "ranges" + * properties or figuring out the U3 address space decoding logic and + * then read its configuration register (if any). + */ + hose->io_base_phys = 0xf4000000; + hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000); + isa_io_base = (unsigned long) hose->io_base_virt; + hose->io_resource.name = np->full_name; + hose->io_resource.start = 0; + hose->io_resource.end = 0x003fffff; + hose->io_resource.flags = IORESOURCE_IO; + hose->pci_mem_offset = 0; + hose->first_busno = 0; + hose->last_busno = 0xef; + hose->mem_resources[0].name = np->full_name; + hose->mem_resources[0].start = 0x80000000; + hose->mem_resources[0].end = 0xefffffff; + hose->mem_resources[0].flags = IORESOURCE_MEM; + + if (u3_agp == NULL) { + DBG("U3 has no AGP, using full resource range\n"); + return; + } + + /* We "remove" the AGP resources from the resources allocated to HT, that + * is we create "holes". However, that code does assumptions that so far + * happen to be true (cross fingers...), typically that resources in the + * AGP node are properly ordered + */ + cur = 0; + for (i=0; i<3; i++) { + struct resource *res = &u3_agp->mem_resources[i]; + if (res->flags != IORESOURCE_MEM) + continue; + /* We don't care about "fine" resources */ + if (res->start >= 0xf0000000) + continue; + /* Check if it's just a matter of "shrinking" us in one direction */ + if (hose->mem_resources[cur].start == res->start) { + DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", + cur, hose->mem_resources[cur].start, res->end + 1); + hose->mem_resources[cur].start = res->end + 1; + continue; + } + if (hose->mem_resources[cur].end == res->end) { + DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", + cur, hose->mem_resources[cur].end, res->start - 1); + hose->mem_resources[cur].end = res->start - 1; + continue; + } + /* No, it's not the case, we need a hole */ + if (cur == 2) { + /* not enough resources to make a hole, we drop part of the range */ + printk(KERN_WARNING "Running out of resources for /ht host !\n"); + hose->mem_resources[cur].end = res->start - 1; + continue; + } + cur++; + DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", + cur-1, res->start - 1, cur, res->end + 1); + hose->mem_resources[cur].name = np->full_name; + hose->mem_resources[cur].flags = IORESOURCE_MEM; + hose->mem_resources[cur].start = res->end + 1; + hose->mem_resources[cur].end = hose->mem_resources[cur-1].end; + hose->mem_resources[cur-1].end = res->start - 1; + } +} + +#endif /* CONFIG_POWER4 */ + +void __init +setup_grackle(struct pci_controller *hose) +{ + setup_indirect_pci(hose, 0xfec00000, 0xfee00000); + if (machine_is_compatible("AAPL,PowerBook1998")) + grackle_set_loop_snoop(hose, 1); +#if 0 /* Disabled for now, HW problems ??? */ + grackle_set_stg(hose, 1); +#endif +} + +static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary) +{ + static unsigned int static_lc_ranges[2024]; + unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; + unsigned int size; + int rlen = 0, orig_rlen; + int memno = 0; + struct resource *res; + int np, na = prom_n_addr_cells(dev); + + np = na + 5; + + /* First we try to merge ranges to fix a problem with some pmacs + * that can have more than 3 ranges, fortunately using contiguous + * addresses -- BenH + */ + dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + if (!dt_ranges) + return; + /* lc_ranges = alloc_bootmem(rlen);*/ + lc_ranges = static_lc_ranges; + if (!lc_ranges) + return; /* what can we do here ? */ + memcpy(lc_ranges, dt_ranges, rlen); + orig_rlen = rlen; + + /* Let's work on a copy of the "ranges" property instead of damaging + * the device-tree image in memory + */ + ranges = lc_ranges; + prev = NULL; + while ((rlen -= np * sizeof(unsigned int)) >= 0) { + if (prev) { + if (prev[0] == ranges[0] && prev[1] == ranges[1] && + (prev[2] + prev[na+4]) == ranges[2] && + (prev[na+2] + prev[na+4]) == ranges[na+2]) { + prev[na+4] += ranges[na+4]; + ranges[0] = 0; + ranges += np; + continue; + } + } + prev = ranges; + ranges += np; + } + + /* + * The ranges property is laid out as an array of elements, + * each of which comprises: + * cells 0 - 2: a PCI address + * cells 3 or 3+4: a CPU physical address + * (size depending on dev->n_addr_cells) + * cells 4+5 or 5+6: the size of the range + */ + ranges = lc_ranges; + rlen = orig_rlen; + while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { + res = NULL; + size = ranges[na+4]; + switch (ranges[0] >> 24) { + case 1: /* I/O space */ + if (ranges[2] != 0) + break; + hose->io_base_phys = ranges[na+2]; + /* limit I/O space to 16MB */ + if (size > 0x01000000) + size = 0x01000000; + hose->io_base_virt = ioremap(ranges[na+2], size); + if (primary) + isa_io_base = (unsigned long) hose->io_base_virt; + res = &hose->io_resource; + res->flags = IORESOURCE_IO; + res->start = ranges[2]; + break; + case 2: /* memory space */ + memno = 0; + if (ranges[1] == 0 && ranges[2] == 0 + && ranges[na+4] <= (16 << 20)) { + /* 1st 16MB, i.e. ISA memory area */ +#if 0 + if (primary) + isa_mem_base = ranges[na+2]; +#endif + memno = 1; + } + while (memno < 3 && hose->mem_resources[memno].flags) + ++memno; + if (memno == 0) + hose->pci_mem_offset = ranges[na+2] - ranges[2]; + if (memno < 3) { + res = &hose->mem_resources[memno]; + res->flags = IORESOURCE_MEM; + res->start = ranges[na+2]; + } + break; + } + if (res != NULL) { + res->name = dev->full_name; + res->end = res->start + size - 1; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; + } + ranges += np; + } +} + +/* + * We assume that if we have a G3 powermac, we have one bridge called + * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, + * if we have one or more bandit or chaos bridges, we don't have a MPC106. + */ +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct reg_property *addr; + char* disp_name; + int *bus_range; + int primary = 1; + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + addr = (struct reg_property *) get_property(dev, "reg", &len); + if (addr == NULL || len < sizeof(*addr)) { + printk(KERN_WARNING "Can't use %s: no address\n", + dev->full_name); + return -ENODEV; + } + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + disp_name = NULL; +#ifdef CONFIG_POWER4 + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose, addr); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose, addr); + disp_name = "U3-HT"; + primary = 1; + } else +#endif /* CONFIG_POWER4 */ + if (device_is_compatible(dev, "uni-north")) { + primary = setup_uninorth(hose, addr); + disp_name = "UniNorth"; + } else if (strcmp(dev->name, "pci") == 0) { + /* XXX assume this is a mpc106 (grackle) */ + setup_grackle(hose); + disp_name = "Grackle (MPC106)"; + } else if (strcmp(dev->name, "bandit") == 0) { + setup_bandit(hose, addr); + disp_name = "Bandit"; + } else if (strcmp(dev->name, "chaos") == 0) { + setup_chaos(hose, addr); + disp_name = "Chaos"; + primary = 0; + } + printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n", + disp_name, addr->address, hose->first_busno, hose->last_busno); + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + return 0; +} + +static void __init +pcibios_fixup_OF_interrupts(void) +{ + struct pci_dev* dev = NULL; + + /* + * Open Firmware often doesn't initialize the + * PCI_INTERRUPT_LINE config register properly, so we + * should find the device node and apply the interrupt + * obtained from the OF device-tree + */ + for_each_pci_dev(dev) { + struct device_node *node; + node = pci_device_to_OF_node(dev); + /* this is the node, see if it has interrupts */ + if (node && node->n_intrs > 0) + dev->irq = node->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +void __init +pmac_pcibios_fixup(void) +{ + /* Fixup interrupts according to OF tree */ + pcibios_fixup_OF_interrupts(); +} + +int +pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) +{ + struct device_node* node; + int updatecfg = 0; + int uninorth_child; + + node = pci_device_to_OF_node(dev); + + /* We don't want to enable USB controllers absent from the OF tree + * (iBook second controller) + */ + if (dev->vendor == PCI_VENDOR_ID_APPLE + && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) + && !node) { + printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", + pci_name(dev)); + return -EINVAL; + } + + if (!node) + return 0; + + uninorth_child = node->parent && + device_is_compatible(node->parent, "uni-north"); + + /* Firewire & GMAC were disabled after PCI probe, the driver is + * claiming them, we must re-enable them now. + */ + if (uninorth_child && !strcmp(node->name, "firewire") && + (device_is_compatible(node, "pci106b,18") || + device_is_compatible(node, "pci106b,30") || + device_is_compatible(node, "pci11c1,5811"))) { + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1); + pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1); + updatecfg = 1; + } + if (uninorth_child && !strcmp(node->name, "ethernet") && + device_is_compatible(node, "gmac")) { + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1); + updatecfg = 1; + } + + if (updatecfg) { + u16 cmd; + + /* + * Make sure PCI is correctly configured + * + * We use old pci_bios versions of the function since, by + * default, gmac is not powered up, and so will be absent + * from the kernel initial PCI lookup. + * + * Should be replaced by 2.4 new PCI mechanisms and really + * register the device. + */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; + pci_write_config_word(dev, PCI_COMMAND, cmd); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16); + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size); + } + + return 0; +} + +/* We power down some devices after they have been probed. They'll + * be powered back on later on + */ +void __init +pmac_pcibios_after_init(void) +{ + struct device_node* nd; + +#ifdef CONFIG_BLK_DEV_IDE + struct pci_dev *dev = NULL; + + /* OF fails to initialize IDE controllers on macs + * (and maybe other machines) + * + * Ideally, this should be moved to the IDE layer, but we need + * to check specifically with Andre Hedrick how to do it cleanly + * since the common IDE code seem to care about the fact that the + * BIOS may have disabled a controller. + * + * -- BenH + */ + for_each_pci_dev(dev) { + if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE) + pci_enable_device(dev); + } +#endif /* CONFIG_BLK_DEV_IDE */ + + nd = find_devices("firewire"); + while (nd) { + if (nd->parent && (device_is_compatible(nd, "pci106b,18") || + device_is_compatible(nd, "pci106b,30") || + device_is_compatible(nd, "pci11c1,5811")) + && device_is_compatible(nd->parent, "uni-north")) { + pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); + } + nd = nd->next; + } + nd = find_devices("ethernet"); + while (nd) { + if (nd->parent && device_is_compatible(nd, "gmac") + && device_is_compatible(nd->parent, "uni-north")) + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); + nd = nd->next; + } +} + +#ifdef CONFIG_PPC64 +static void __init pmac_fixup_phb_resources(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; + hose->io_resource.start += offset; + hose->io_resource.end += offset; + printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", + hose->global_number, + hose->io_resource.start, hose->io_resource.end); + } +} + +void __init pmac_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + /* Probe root PCI hosts, that is on U3 the AGP host and the + * HyperTransport host. That one is actually "kept" around + * and actually added last as it's resource management relies + * on the AGP resources to have been setup first + */ + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Now setup the HyperTransport host if we found any + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + /* Fixup the IO resources on our host bridges as the common code + * does it only for childs of the host bridges + */ + pmac_fixup_phb_resources(); + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions hopefully. + */ + if (u3_agp) { + struct device_node *np = u3_agp->arch_data; + PCI_DN(np)->busno = 0xf0; + for (np = np->child; np; np = np->sibling) + PCI_DN(np)->busno = 0xf0; + } + + pmac_check_ht_link(); + + /* Tell pci.c to not use the common resource allocation mecanism */ + pci_probe_only = 1; + + /* Allow all IO */ + io_page_mask = -1; +} +#endif + +#ifdef CONFIG_PPC32 +void pmac_pci_fixup_cardbus(struct pci_dev* dev) +{ + if (_machine != _MACH_Pmac) + return; + /* + * Fix the interrupt routing on the various cardbus bridges + * used on powerbooks + */ + if (dev->vendor != PCI_VENDOR_ID_TI) + return; + if (dev->device == PCI_DEVICE_ID_TI_1130 || + dev->device == PCI_DEVICE_ID_TI_1131) { + u8 val; + /* Enable PCI interrupt */ + if (pci_read_config_byte(dev, 0x91, &val) == 0) + pci_write_config_byte(dev, 0x91, val | 0x30); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } + if (dev->device == PCI_DEVICE_ID_TI_1210 || + dev->device == PCI_DEVICE_ID_TI_1211 || + dev->device == PCI_DEVICE_ID_TI_1410 || + dev->device == PCI_DEVICE_ID_TI_1510) { + u8 val; + /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA + signal out the MFUNC0 pin */ + if (pci_read_config_byte(dev, 0x8c, &val) == 0) + pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus); + +void pmac_pci_fixup_pciata(struct pci_dev* dev) +{ + u8 progif = 0; + + /* + * On PowerMacs, we try to switch any PCI ATA controller to + * fully native mode + */ + if (_machine != _MACH_Pmac) + return; + /* Some controllers don't have the class IDE */ + if (dev->vendor == PCI_VENDOR_ID_PROMISE) + switch(dev->device) { + case PCI_DEVICE_ID_PROMISE_20246: + case PCI_DEVICE_ID_PROMISE_20262: + case PCI_DEVICE_ID_PROMISE_20263: + case PCI_DEVICE_ID_PROMISE_20265: + case PCI_DEVICE_ID_PROMISE_20267: + case PCI_DEVICE_ID_PROMISE_20268: + case PCI_DEVICE_ID_PROMISE_20269: + case PCI_DEVICE_ID_PROMISE_20270: + case PCI_DEVICE_ID_PROMISE_20271: + case PCI_DEVICE_ID_PROMISE_20275: + case PCI_DEVICE_ID_PROMISE_20276: + case PCI_DEVICE_ID_PROMISE_20277: + goto good; + } + /* Others, check PCI class */ + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + good: + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 5) != 5) { + printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev)); + (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); + if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || + (progif & 5) != 5) + printk(KERN_ERR "Rewrite of PROGIF failed !\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); +#endif + +/* + * Disable second function on K2-SATA, it's broken + * and disable IO BARs on first one + */ +static void fixup_k2_sata(struct pci_dev* dev) +{ + int i; + u16 cmd; + + if (PCI_FUNC(dev->devfn) > 0) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 6; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + } + } else { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~PCI_COMMAND_IO; + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 5; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); + -- cgit v1.2.3