From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_cs5530.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) (limited to 'drivers/ata/pata_cs5530.c') diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 29d459be19b..b9fd5388b47 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -37,6 +37,13 @@ #define DRV_NAME "pata_cs5530" #define DRV_VERSION "0.7.1" +static void __iomem *cs5530_port_base(struct ata_port *ap) +{ + unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr; + + return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no); +} + /** * cs5530_set_piomode - PIO setup * @ap: ATA interface @@ -52,19 +59,19 @@ static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} }; - unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + void __iomem *base = cs5530_port_base(ap); u32 tuning; int format; /* Find out which table to use */ - tuning = inl(base + 0x04); + tuning = ioread32(base + 0x04); format = (tuning & 0x80000000UL) ? 1 : 0; /* Now load the right timing register */ if (adev->devno) base += 0x08; - outl(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); + iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); } /** @@ -79,12 +86,12 @@ static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) { - unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + void __iomem *base = cs5530_port_base(ap); u32 tuning, timing = 0; u8 reg; /* Find out which table to use */ - tuning = inl(base + 0x04); + tuning = ioread32(base + 0x04); switch(adev->dma_mode) { case XFER_UDMA_0: @@ -105,20 +112,20 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) /* Merge in the PIO format bit */ timing |= (tuning & 0x80000000UL); if (adev->devno == 0) /* Master */ - outl(timing, base + 0x04); + iowrite32(timing, base + 0x04); else { if (timing & 0x00100000) tuning |= 0x00100000; /* UDMA for both */ else tuning &= ~0x00100000; /* MWDMA for both */ - outl(tuning, base + 0x04); - outl(timing, base + 0x0C); + iowrite32(tuning, base + 0x04); + iowrite32(timing, base + 0x0C); } /* Set the DMA capable bit in the BMDMA area */ - reg = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); reg |= (1 << (5 + adev->devno)); - outb(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); /* Remember the last DMA setup we did */ @@ -210,7 +217,7 @@ static struct ata_port_operations cs5530_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = cs5530_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, -- cgit v1.2.3