From 08a2b3b610a734a6d6e4ff0455eec1241966fcb3 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 24 May 2007 13:52:51 +0200 Subject: USB: whiteheat driver update this is an update of the whiteheat driver. It fixes: - switch from spinlocks to mutexes to prevent sleeping with a spinlock held - locking to stop races with disconnect - error handling for commands that time out Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/whiteheat.c | 92 ++++++++++++++++++++++++------------------ 1 file changed, 52 insertions(+), 40 deletions(-) (limited to 'drivers/usb/serial/whiteheat.c') diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 27c5f8f9a2d..8fd976d728e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -74,6 +74,7 @@ #include #include #include +#include #include #include #include @@ -203,7 +204,7 @@ static struct usb_serial_driver whiteheat_device = { struct whiteheat_command_private { - spinlock_t lock; + struct mutex mutex; __u8 port_running; __u8 command_finished; wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */ @@ -232,6 +233,7 @@ struct whiteheat_private { struct usb_serial_port *port; struct list_head tx_urbs_free; struct list_head tx_urbs_submitted; + struct mutex deathwarrant; }; @@ -425,6 +427,7 @@ static int whiteheat_attach (struct usb_serial *serial) } spin_lock_init(&info->lock); + mutex_init(&info->deathwarrant); info->flags = 0; info->mcr = 0; INIT_WORK(&info->rx_work, rx_data_softint); @@ -495,7 +498,7 @@ static int whiteheat_attach (struct usb_serial *serial) goto no_command_private; } - spin_lock_init(&command_info->lock); + mutex_init(&command_info->mutex); command_info->port_running = 0; init_waitqueue_head(&command_info->wait_command); usb_set_serial_port_data(command_port, command_info); @@ -654,7 +657,6 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp) struct urb *urb; struct list_head *tmp; struct list_head *tmp2; - unsigned long flags; dbg("%s - port %d", __FUNCTION__, port->number); @@ -683,24 +685,32 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp) firm_close(port); +printk(KERN_ERR"Before processing rx_urbs_submitted.\n"); /* shutdown our bulk reads and writes */ - spin_lock_irqsave(&info->lock, flags); + mutex_lock(&info->deathwarrant); + spin_lock_irq(&info->lock); list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; + list_del(tmp); + spin_unlock_irq(&info->lock); usb_kill_urb(urb); - list_move(tmp, &info->rx_urbs_free); + spin_lock_irq(&info->lock); + list_add(tmp, &info->rx_urbs_free); } list_for_each_safe(tmp, tmp2, &info->rx_urb_q) list_move(tmp, &info->rx_urbs_free); - list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) { wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; + list_del(tmp); + spin_unlock_irq(&info->lock); usb_kill_urb(urb); - list_move(tmp, &info->tx_urbs_free); + spin_lock_irq(&info->lock); + list_add(tmp, &info->tx_urbs_free); } - spin_unlock_irqrestore(&info->lock, flags); + spin_unlock_irq(&info->lock); + mutex_unlock(&info->deathwarrant); stop_command_port(port->serial); @@ -872,7 +882,7 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un } -static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { dbg("%s -port %d", __FUNCTION__, port->number); @@ -920,7 +930,7 @@ static int whiteheat_chars_in_buffer(struct usb_serial_port *port) spin_unlock_irqrestore(&info->lock, flags); dbg ("%s - returns %d", __FUNCTION__, chars); - return (chars); + return chars; } @@ -962,7 +972,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port) /***************************************************************************** * Connect Tech's White Heat callback routines *****************************************************************************/ -static void command_port_write_callback (struct urb *urb) +static void command_port_write_callback(struct urb *urb) { dbg("%s", __FUNCTION__); @@ -973,43 +983,43 @@ static void command_port_write_callback (struct urb *urb) } -static void command_port_read_callback (struct urb *urb) +static void command_port_read_callback(struct urb *urb) { struct usb_serial_port *command_port = (struct usb_serial_port *)urb->context; struct whiteheat_command_private *command_info; unsigned char *data = urb->transfer_buffer; int result; - unsigned long flags; dbg("%s", __FUNCTION__); + command_info = usb_get_serial_port_data(command_port); + if (!command_info) { + dbg ("%s - command_info is NULL, exiting.", __FUNCTION__); + return; + } if (urb->status) { dbg("%s - nonzero urb status: %d", __FUNCTION__, urb->status); + if (urb->status != -ENOENT) + command_info->command_finished = WHITEHEAT_CMD_FAILURE; + wake_up(&command_info->wait_command); return; } usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data); - command_info = usb_get_serial_port_data(command_port); - if (!command_info) { - dbg ("%s - command_info is NULL, exiting.", __FUNCTION__); - return; - } - spin_lock_irqsave(&command_info->lock, flags); - if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; - wake_up_interruptible(&command_info->wait_command); + wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_CMD_FAILURE) { command_info->command_finished = WHITEHEAT_CMD_FAILURE; - wake_up_interruptible(&command_info->wait_command); + wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_EVENT) { /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ dbg("%s - event received", __FUNCTION__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; - wake_up_interruptible(&command_info->wait_command); + wake_up(&command_info->wait_command); } else { dbg("%s - bad reply from firmware", __FUNCTION__); } @@ -1017,7 +1027,6 @@ static void command_port_read_callback (struct urb *urb) /* Continue trying to always read */ command_port->read_urb->dev = command_port->serial->dev; result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); - spin_unlock_irqrestore(&command_info->lock, flags); if (result) dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); } @@ -1095,20 +1104,20 @@ static void whiteheat_write_callback(struct urb *urb) /***************************************************************************** * Connect Tech's White Heat firmware interface *****************************************************************************/ -static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) +static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_private *info; __u8 *transfer_buffer; int retval = 0; - unsigned long flags; + int t; dbg("%s - command %d", __FUNCTION__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); - spin_lock_irqsave(&command_info->lock, flags); + mutex_lock(&command_info->mutex); command_info->command_finished = false; transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; @@ -1116,18 +1125,17 @@ static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 * memcpy (&transfer_buffer[1], data, datasize); command_port->write_urb->transfer_buffer_length = datasize + 1; command_port->write_urb->dev = port->serial->dev; - retval = usb_submit_urb (command_port->write_urb, GFP_KERNEL); + retval = usb_submit_urb (command_port->write_urb, GFP_NOIO); if (retval) { dbg("%s - submit urb failed", __FUNCTION__); goto exit; } - spin_unlock_irqrestore(&command_info->lock, flags); /* wait for the command to complete */ - wait_event_interruptible_timeout(command_info->wait_command, + t = wait_event_timeout(command_info->wait_command, (bool)command_info->command_finished, COMMAND_TIMEOUT); - - spin_lock_irqsave(&command_info->lock, flags); + if (!t) + usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { dbg("%s - command timed out.", __FUNCTION__); @@ -1152,7 +1160,7 @@ static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 * } exit: - spin_unlock_irqrestore(&command_info->lock, flags); + mutex_unlock(&command_info->mutex); return retval; } @@ -1305,12 +1313,11 @@ static int start_command_port(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; - unsigned long flags; int retval = 0; command_port = serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); - spin_lock_irqsave(&command_info->lock, flags); + mutex_lock(&command_info->mutex); if (!command_info->port_running) { /* Work around HCD bugs */ usb_clear_halt(serial->dev, command_port->read_urb->pipe); @@ -1325,7 +1332,7 @@ static int start_command_port(struct usb_serial *serial) command_info->port_running++; exit: - spin_unlock_irqrestore(&command_info->lock, flags); + mutex_unlock(&command_info->mutex); return retval; } @@ -1334,15 +1341,14 @@ static void stop_command_port(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; - unsigned long flags; command_port = serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); - spin_lock_irqsave(&command_info->lock, flags); + mutex_lock(&command_info->mutex); command_info->port_running--; if (!command_info->port_running) usb_kill_urb(command_port->read_urb); - spin_unlock_irqrestore(&command_info->lock, flags); + mutex_unlock(&command_info->mutex); } @@ -1363,17 +1369,23 @@ static int start_port_read(struct usb_serial_port *port) wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; urb->dev = port->serial->dev; + spin_unlock_irqrestore(&info->lock, flags); retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { + spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->rx_urbs_free); list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; + list_del(tmp); + spin_unlock_irqrestore(&info->lock, flags); usb_kill_urb(urb); - list_move(tmp, &info->rx_urbs_free); + spin_lock_irqsave(&info->lock, flags); + list_add(tmp, &info->rx_urbs_free); } break; } + spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->rx_urbs_submitted); } -- cgit v1.2.3