From 55f4fa4e33e90c6b25b4c8ed038392a73b654fef Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 23 Apr 2009 20:10:43 +0200 Subject: Maxim 1586 regulator driver The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/max1586.h | 52 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/regulator/max1586.h (limited to 'include') diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h new file mode 100644 index 00000000000..2056973396b --- /dev/null +++ b/include/linux/regulator/max1586.h @@ -0,0 +1,52 @@ +/* + * max1586.h -- Voltage regulation for the Maxim 1586 + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef REGULATOR_MAX1586 +#define REGULATOR_MAX1586 + +#include + +#define MAX1586_V3 0 +#define MAX1586_V6 1 + +/** + * max1586_subdev_data - regulator data + * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) + * @name: regulator cute name (example for V3: "vcc_core") + * @platform_data: regulator init data (contraints, supplies, ...) + */ +struct max1586_subdev_data { + int id; + char *name; + struct regulator_init_data *platform_data; +}; + +/** + * max1586_platform_data - platform data for max1586 + * @num_subdevs: number of regultors used (may be 1 or 2) + * @subdevs: regulator used + * At most, there will be a regulator for V3 and one for V6 voltages. + */ +struct max1586_platform_data { + int num_subdevs; + struct max1586_subdev_data *subdevs; +}; + +#endif -- cgit v1.2.3 From 1d98cccf7f8b944ba4ea56d14bbb7c2eeee59bfe Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 26 Apr 2009 16:49:39 +0300 Subject: regulator: add userspace-consumer driver The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 10 ++ drivers/regulator/Makefile | 1 + drivers/regulator/userspace-consumer.c | 200 +++++++++++++++++++++++++++ include/linux/regulator/userspace-consumer.h | 25 ++++ 4 files changed, 236 insertions(+) create mode 100644 drivers/regulator/userspace-consumer.c create mode 100644 include/linux/regulator/userspace-consumer.h (limited to 'include') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 707da4d2353..5bec17cf1d5 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -47,6 +47,16 @@ config REGULATOR_VIRTUAL_CONSUMER If unsure, say no. +config REGULATOR_USERSPACE_CONSUMER + tristate "Userspace regulator consumer support" + default n + help + There are some classes of devices that are controlled entirely + from user space. Usersapce consumer driver provides ability to + control power supplies for such devices. + + If unsure, say no. + config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" default n diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 1d7de87a8e1..faf7bcc1af9 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_REGULATOR) += core.o obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o +obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c new file mode 100644 index 00000000000..71fcf9df00f --- /dev/null +++ b/drivers/regulator/userspace-consumer.c @@ -0,0 +1,200 @@ +/* + * userspace-consumer.c + * + * Copyright 2009 CompuLab, Ltd. + * + * Author: Mike Rapoport + * + * Based of virtual consumer driver: + * Copyright 2008 Wolfson Microelectronics PLC. + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include + +struct userspace_consumer_data { + const char *name; + + struct mutex lock; + bool enabled; + + int num_supplies; + struct regulator_bulk_data *supplies; +}; + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct userspace_consumer_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} + +static ssize_t show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct userspace_consumer_data *data = dev_get_drvdata(dev); + + if (data->enabled) + return sprintf(buf, "enabled\n"); + + return sprintf(buf, "disabled\n"); +} + +static ssize_t set_state(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct userspace_consumer_data *data = dev_get_drvdata(dev); + bool enabled; + int ret; + + /* + * sysfs_streq() doesn't need the \n's, but we add them so the strings + * will be shared with show_state(), above. + */ + if (sysfs_streq(buf, "enabled\n") || sysfs_streq(buf, "1")) + enabled = true; + else if (sysfs_streq(buf, "disabled\n") || sysfs_streq(buf, "0")) + enabled = false; + else { + dev_err(dev, "Configuring invalid mode\n"); + return count; + } + + mutex_lock(&data->lock); + if (enabled != data->enabled) { + if (enabled) + ret = regulator_bulk_enable(data->num_supplies, + data->supplies); + else + ret = regulator_bulk_disable(data->num_supplies, + data->supplies); + + if (ret == 0) + data->enabled = enabled; + else + dev_err(dev, "Failed to configure state: %d\n", ret); + } + mutex_unlock(&data->lock); + + return count; +} + +static DEVICE_ATTR(name, 0444, show_name, NULL); +static DEVICE_ATTR(state, 0644, show_state, set_state); + +static struct device_attribute *attributes[] = { + &dev_attr_name, + &dev_attr_state, +}; + +static int regulator_userspace_consumer_probe(struct platform_device *pdev) +{ + struct regulator_userspace_consumer_data *pdata; + struct userspace_consumer_data *drvdata; + int ret, i; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -EINVAL; + + drvdata = kzalloc(sizeof(struct userspace_consumer_data), GFP_KERNEL); + if (drvdata == NULL) + return -ENOMEM; + + drvdata->name = pdata->name; + drvdata->num_supplies = pdata->num_supplies; + drvdata->supplies = pdata->supplies; + + mutex_init(&drvdata->lock); + + ret = regulator_bulk_get(&pdev->dev, drvdata->num_supplies, + drvdata->supplies); + if (ret) { + dev_err(&pdev->dev, "Failed to get supplies: %d\n", ret); + goto err_alloc_supplies; + } + + for (i = 0; i < ARRAY_SIZE(attributes); i++) { + ret = device_create_file(&pdev->dev, attributes[i]); + if (ret != 0) + goto err_create_attrs; + } + + if (pdata->init_on) + ret = regulator_bulk_enable(drvdata->num_supplies, + drvdata->supplies); + + drvdata->enabled = pdata->init_on; + + if (ret) { + dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret); + goto err_create_attrs; + } + + platform_set_drvdata(pdev, drvdata); + + return 0; + +err_create_attrs: + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + + regulator_bulk_free(drvdata->num_supplies, drvdata->supplies); + +err_alloc_supplies: + kfree(drvdata); + return ret; +} + +static int regulator_userspace_consumer_remove(struct platform_device *pdev) +{ + struct userspace_consumer_data *data = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + + if (data->enabled) + regulator_bulk_disable(data->num_supplies, data->supplies); + + regulator_bulk_free(data->num_supplies, data->supplies); + kfree(data); + + return 0; +} + +static struct platform_driver regulator_userspace_consumer_driver = { + .probe = regulator_userspace_consumer_probe, + .remove = regulator_userspace_consumer_remove, + .driver = { + .name = "reg-userspace-consumer", + }, +}; + + +static int __init regulator_userspace_consumer_init(void) +{ + return platform_driver_register(®ulator_userspace_consumer_driver); +} +module_init(regulator_userspace_consumer_init); + +static void __exit regulator_userspace_consumer_exit(void) +{ + platform_driver_unregister(®ulator_userspace_consumer_driver); +} +module_exit(regulator_userspace_consumer_exit); + +MODULE_AUTHOR("Mike Rapoport "); +MODULE_DESCRIPTION("Userspace consumer for voltage and current regulators"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h new file mode 100644 index 00000000000..b4554ce9d4b --- /dev/null +++ b/include/linux/regulator/userspace-consumer.h @@ -0,0 +1,25 @@ +#ifndef __REGULATOR_PLATFORM_CONSUMER_H_ +#define __REGULATOR_PLATFORM_CONSUMER_H_ + +struct regulator_consumer_supply; + +/** + * struct regulator_userspace_consumer_data - line consumer + * initialisation data. + * + * @name: Name for the consumer line + * @num_supplies: Number of supplies feeding the line + * @supplies: Supplies configuration. + * @init_on: Set if the regulators supplying the line should be + * enabled during initialisation + */ +struct regulator_userspace_consumer_data { + const char *name; + + int num_supplies; + struct regulator_bulk_data *supplies; + + bool init_on; +}; + +#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */ -- cgit v1.2.3 From 0cbdf7bce5b98807b946d1a96956f30dcae24a50 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 19 May 2009 07:33:55 +0200 Subject: LP3971 PMIC regulator driver (updated and combined version) This patch adds regulator drivers for National Semiconductors LP3971 PMIC. This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/lp3971.c | 562 +++++++++++++++++++++++++++++++++++++++ include/linux/regulator/lp3971.h | 51 ++++ 4 files changed, 621 insertions(+) create mode 100644 drivers/regulator/lp3971.c create mode 100644 include/linux/regulator/lp3971.h (limited to 'include') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 5bec17cf1d5..f4317798e47 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -110,4 +110,11 @@ config REGULATOR_PCF50633 Say Y here to support the voltage regulators and convertors on PCF50633 +config REGULATOR_LP3971 + tristate "National Semiconductors LP3971 PMIC regulator driver" + depends on I2C + help + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3971 PMIC + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index faf7bcc1af9..4d762c4cccf 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o +obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c new file mode 100644 index 00000000000..35abebea4ed --- /dev/null +++ b/drivers/regulator/lp3971.c @@ -0,0 +1,562 @@ +/* + * Regulator driver for National Semiconductors LP3971 PMIC chip + * + * Copyright (C) 2009 Samsung Electronics + * Author: Marek Szyprowski + * + * Based on wm8350.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +struct lp3971 { + struct device *dev; + struct mutex io_lock; + struct i2c_client *i2c; + int num_regulators; + struct regulator_dev **rdev; +}; + +static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg); +static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val); + +#define LP3971_SYS_CONTROL1_REG 0x07 + +/* System control register 1 initial value, + bits 4 and 5 are EPROM programmable */ +#define SYS_CONTROL1_INIT_VAL 0x40 +#define SYS_CONTROL1_INIT_MASK 0xCF + +#define LP3971_BUCK_VOL_ENABLE_REG 0x10 +#define LP3971_BUCK_VOL_CHANGE_REG 0x20 + +/* Voltage control registers shift: + LP3971_BUCK1 -> 0 + LP3971_BUCK2 -> 4 + LP3971_BUCK3 -> 6 +*/ +#define BUCK_VOL_CHANGE_SHIFT(x) (((1 << x) & ~0x01) << 1) +#define BUCK_VOL_CHANGE_FLAG_GO 0x01 +#define BUCK_VOL_CHANGE_FLAG_TARGET 0x02 +#define BUCK_VOL_CHANGE_FLAG_MASK 0x03 + +#define LP3971_BUCK1_BASE 0x23 +#define LP3971_BUCK2_BASE 0x29 +#define LP3971_BUCK3_BASE 0x32 + +const static int buck_base_addr[] = { + LP3971_BUCK1_BASE, + LP3971_BUCK2_BASE, + LP3971_BUCK3_BASE, +}; + +#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x]) +#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1) + +const static int buck_voltage_map[] = { + 0, 800, 850, 900, 950, 1000, 1050, 1100, + 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, + 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800, + 3000, 3300, +}; + +#define BUCK_TARGET_VOL_MASK 0x3f +#define BUCK_TARGET_VOL_MIN_IDX 0x01 +#define BUCK_TARGET_VOL_MAX_IDX 0x19 + +#define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2) + +#define LP3971_LDO_ENABLE_REG 0x12 +#define LP3971_LDO_VOL_CONTR_BASE 0x39 + +/* Voltage control registers: + LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0 + LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0 + LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1 + LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1 + LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2 +*/ +#define LP3971_LDO_VOL_CONTR_REG(x) (LP3971_LDO_VOL_CONTR_BASE + (x >> 1)) + +/* Voltage control registers shift: + LP3971_LDO1 -> 0, LP3971_LDO2 -> 4 + LP3971_LDO3 -> 0, LP3971_LDO4 -> 4 + LP3971_LDO5 -> 0 +*/ +#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2) +#define LDO_VOL_CONTR_MASK 0x0f + +const static int ldo45_voltage_map[] = { + 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, + 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300, +}; + +const static int ldo123_voltage_map[] = { + 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, + 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300, +}; + +const static int *ldo_voltage_map[] = { + ldo123_voltage_map, /* LDO1 */ + ldo123_voltage_map, /* LDO2 */ + ldo123_voltage_map, /* LDO3 */ + ldo45_voltage_map, /* LDO4 */ + ldo45_voltage_map, /* LDO5 */ +}; + +#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)]) + +#define LDO_VOL_MIN_IDX 0x00 +#define LDO_VOL_MAX_IDX 0x0f + +static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index) +{ + int ldo = rdev_get_id(dev) - LP3971_LDO1; + return 1000 * LDO_VOL_VALUE_MAP(ldo)[index]; +} + +static int lp3971_ldo_is_enabled(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 mask = 1 << (1 + ldo); + u16 val; + + val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG); + return (val & mask) != 0; +} + +static int lp3971_ldo_enable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 mask = 1 << (1 + ldo); + + return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask); +} + +static int lp3971_ldo_disable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 mask = 1 << (1 + ldo); + + return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0); +} + +static int lp3971_ldo_get_voltage(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 val, reg; + + reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo)); + val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK; + + return 1000 * LDO_VOL_VALUE_MAP(ldo)[val]; +} + +static int lp3971_ldo_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + const int *vol_map = LDO_VOL_VALUE_MAP(ldo); + u16 val; + + if (min_vol < vol_map[LDO_VOL_MIN_IDX] || + min_vol > vol_map[LDO_VOL_MAX_IDX]) + return -EINVAL; + + for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++) + if (vol_map[val] >= min_vol) + break; + + if (vol_map[val] > max_vol) + return -EINVAL; + + return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo), + LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo), val); +} + +static struct regulator_ops lp3971_ldo_ops = { + .list_voltage = lp3971_ldo_list_voltage, + .is_enabled = lp3971_ldo_is_enabled, + .enable = lp3971_ldo_enable, + .disable = lp3971_ldo_disable, + .get_voltage = lp3971_ldo_get_voltage, + .set_voltage = lp3971_ldo_set_voltage, +}; + +static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index) +{ + return 1000 * buck_voltage_map[index]; +} + +static int lp3971_dcdc_is_enabled(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 mask = 1 << (buck * 2); + u16 val; + + val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG); + return (val & mask) != 0; +} + +static int lp3971_dcdc_enable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 mask = 1 << (buck * 2); + + return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask); +} + +static int lp3971_dcdc_disable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 mask = 1 << (buck * 2); + + return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0); +} + +static int lp3971_dcdc_get_voltage(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 reg; + int val; + + reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck)); + reg &= BUCK_TARGET_VOL_MASK; + + if (reg <= BUCK_TARGET_VOL_MAX_IDX) + val = 1000 * buck_voltage_map[reg]; + else { + val = 0; + dev_warn(&dev->dev, "chip reported incorrect voltage value.\n"); + } + + return val; +} + +static int lp3971_dcdc_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + const int *vol_map = buck_voltage_map; + u16 val; + int ret; + + if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] || + min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX]) + return -EINVAL; + + for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX; + val++) + if (vol_map[val] >= min_vol) + break; + + if (vol_map[val] > max_vol) + return -EINVAL; + + ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck), + BUCK_TARGET_VOL_MASK, val); + if (ret) + return ret; + + ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG, + BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck), + BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck)); + if (ret) + return ret; + + return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG, + BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck), + 0 << BUCK_VOL_CHANGE_SHIFT(buck)); +} + +static struct regulator_ops lp3971_dcdc_ops = { + .list_voltage = lp3971_dcdc_list_voltage, + .is_enabled = lp3971_dcdc_is_enabled, + .enable = lp3971_dcdc_enable, + .disable = lp3971_dcdc_disable, + .get_voltage = lp3971_dcdc_get_voltage, + .set_voltage = lp3971_dcdc_set_voltage, +}; + +static struct regulator_desc regulators[] = { + { + .name = "LDO1", + .id = LP3971_LDO1, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = LP3971_LDO2, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO3", + .id = LP3971_LDO3, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO4", + .id = LP3971_LDO4, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo45_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO5", + .id = LP3971_LDO5, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo45_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC1", + .id = LP3971_DCDC1, + .ops = &lp3971_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC2", + .id = LP3971_DCDC2, + .ops = &lp3971_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC3", + .id = LP3971_DCDC3, + .ops = &lp3971_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, +}; + +static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count, + u16 *dest) +{ + int ret; + + if (count != 1) + return -EIO; + ret = i2c_smbus_read_byte_data(i2c, reg); + if (ret < 0 || count != 1) + return -EIO; + + *dest = ret; + return 0; +} + +static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count, + const u16 *src) +{ + int ret; + + if (count != 1) + return -EIO; + ret = i2c_smbus_write_byte_data(i2c, reg, *src); + if (ret >= 0) + return 0; + + return ret; +} + +static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg) +{ + u16 val = 0; + + mutex_lock(&lp3971->io_lock); + + lp3971_i2c_read(lp3971->i2c, reg, 1, &val); + + dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg, + (unsigned)val&0xff); + + mutex_unlock(&lp3971->io_lock); + + return val & 0xff; +} + +static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val) +{ + u16 tmp; + int ret; + + mutex_lock(&lp3971->io_lock); + + ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp); + tmp = (tmp & ~mask) | val; + if (ret == 0) { + ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp); + dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg, + (unsigned)val&0xff); + } + mutex_unlock(&lp3971->io_lock); + + return ret; +} + +static int setup_regulators(struct lp3971 *lp3971, + struct lp3971_platform_data *pdata) +{ + int i, err; + int num_regulators = pdata->num_regulators; + lp3971->num_regulators = num_regulators; + lp3971->rdev = kzalloc(sizeof(struct regulator_dev *) * num_regulators, + GFP_KERNEL); + + /* Instantiate the regulators */ + for (i = 0; i < num_regulators; i++) { + int id = pdata->regulators[i].id; + lp3971->rdev[i] = regulator_register(®ulators[id], + lp3971->dev, pdata->regulators[i].initdata, lp3971); + + err = IS_ERR(lp3971->rdev[i]); + if (err) { + dev_err(lp3971->dev, "regulator init failed: %d\n", + err); + goto error; + } + } + + return 0; +error: + for (i = 0; i < num_regulators; i++) + if (lp3971->rdev[i]) + regulator_unregister(lp3971->rdev[i]); + kfree(lp3971->rdev); + lp3971->rdev = NULL; + return err; +} + +static int __devinit lp3971_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct lp3971 *lp3971; + struct lp3971_platform_data *pdata = i2c->dev.platform_data; + int ret; + u16 val; + + lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL); + if (lp3971 == NULL) { + ret = -ENOMEM; + goto err; + } + + lp3971->i2c = i2c; + lp3971->dev = &i2c->dev; + i2c_set_clientdata(i2c, lp3971); + + mutex_init(&lp3971->io_lock); + + /* Detect LP3971 */ + ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val); + if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) + ret = -ENODEV; + if (ret < 0) { + dev_err(&i2c->dev, "failed to detect device\n"); + goto err_detect; + } + + if (pdata) { + ret = setup_regulators(lp3971, pdata); + if (ret < 0) + goto err_detect; + } else + dev_warn(lp3971->dev, "No platform init data supplied\n"); + + return 0; + +err_detect: + i2c_set_clientdata(i2c, NULL); + kfree(lp3971); +err: + return ret; +} + +static int __devexit lp3971_i2c_remove(struct i2c_client *i2c) +{ + struct lp3971 *lp3971 = i2c_get_clientdata(i2c); + int i; + for (i = 0; i < lp3971->num_regulators; i++) + if (lp3971->rdev[i]) + regulator_unregister(lp3971->rdev[i]); + kfree(lp3971->rdev); + i2c_set_clientdata(i2c, NULL); + kfree(lp3971); + + return 0; +} + +static const struct i2c_device_id lp3971_i2c_id[] = { + { "lp3971", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id); + +static struct i2c_driver lp3971_i2c_driver = { + .driver = { + .name = "LP3971", + .owner = THIS_MODULE, + }, + .probe = lp3971_i2c_probe, + .remove = lp3971_i2c_remove, + .id_table = lp3971_i2c_id, +}; + +static int __init lp3971_module_init(void) +{ + int ret = -ENODEV; + + ret = i2c_add_driver(&lp3971_i2c_driver); + if (ret != 0) + pr_err("Failed to register I2C driver: %d\n", ret); + + return ret; +} +module_init(lp3971_module_init); + +static void __exit lp3971_module_exit(void) +{ + i2c_del_driver(&lp3971_i2c_driver); +} +module_exit(lp3971_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marek Szyprowski "); +MODULE_DESCRIPTION("LP3971 PMIC driver"); diff --git a/include/linux/regulator/lp3971.h b/include/linux/regulator/lp3971.h new file mode 100644 index 00000000000..61401649fe7 --- /dev/null +++ b/include/linux/regulator/lp3971.h @@ -0,0 +1,51 @@ +/* + * National Semiconductors LP3971 PMIC chip client interface + * + * Copyright (C) 2009 Samsung Electronics + * Author: Marek Szyprowski + * + * Based on wm8400.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_REGULATOR_LP3971_H +#define __LINUX_REGULATOR_LP3971_H + +#include + +#define LP3971_LDO1 0 +#define LP3971_LDO2 1 +#define LP3971_LDO3 2 +#define LP3971_LDO4 3 +#define LP3971_LDO5 4 + +#define LP3971_DCDC1 5 +#define LP3971_DCDC2 6 +#define LP3971_DCDC3 7 + +#define LP3971_NUM_REGULATORS 8 + +struct lp3971_regulator_subdev { + int id; + struct regulator_init_data *initdata; +}; + +struct lp3971_platform_data { + int num_regulators; + struct lp3971_regulator_subdev *regulators; +}; + +#endif -- cgit v1.2.3 From b110a8fb242bc34e4b7686252899ce0fca956e2c Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 28 May 2009 07:15:16 +0200 Subject: regulator/max1586: support increased V3 voltage range The V3 regulator can be configured with an external resistor connected to the feedback pin (R24 in the data sheet) to increase the voltage range. For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency. Signed-off-by: Philipp Zabel Acked-by: Mark Brown Acked-by: Robert Jarzmik Signed-off-by: Liam Girdwood --- drivers/regulator/max1586.c | 71 ++++++++++++++++++++++++++++----------- include/linux/regulator/max1586.h | 11 ++++++ 2 files changed, 63 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c index bbbb55fcfe8..92799f40c86 100644 --- a/drivers/regulator/max1586.c +++ b/drivers/regulator/max1586.c @@ -29,7 +29,6 @@ #define MAX1586_V3_MIN_UV 700000 #define MAX1586_V3_MAX_UV 1475000 -#define MAX1586_V3_STEP_UV 25000 #define MAX1586_V6_MIN_UV 0 #define MAX1586_V6_MAX_UV 3000000 @@ -37,33 +36,52 @@ #define I2C_V3_SELECT (0 << 5) #define I2C_V6_SELECT (1 << 5) +struct max1586_data { + struct i2c_client *client; + + /* min/max V3 voltage */ + int min_uV; + int max_uV; + + struct regulator_dev *rdev[0]; +}; + /* * V3 voltage * On I2C bus, sending a "x" byte to the max1586 means : * set V3 to 0.700V + (x & 0x1f) * 0.025V + * This voltage can be increased by external resistors + * R24 and R25=100kOhm as described in the data sheet. + * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm */ -static int max1586_v3_calc_voltage(unsigned selector) +static int max1586_v3_calc_voltage(struct max1586_data *max1586, + unsigned selector) { - return MAX1586_V3_MIN_UV + (MAX1586_V3_STEP_UV * selector); + unsigned range_uV = max1586->max_uV - max1586->min_uV; + + return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL); } static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV) { - struct i2c_client *client = rdev_get_drvdata(rdev); + struct max1586_data *max1586 = rdev_get_drvdata(rdev); + struct i2c_client *client = max1586->client; + unsigned range_uV = max1586->max_uV - max1586->min_uV; unsigned selector; u8 v3_prog; - if (min_uV < MAX1586_V3_MIN_UV || min_uV > MAX1586_V3_MAX_UV) - return -EINVAL; - if (max_uV < MAX1586_V3_MIN_UV || max_uV > MAX1586_V3_MAX_UV) + if (min_uV > max1586->max_uV || max_uV < max1586->min_uV) return -EINVAL; + if (min_uV < max1586->min_uV) + min_uV = max1586->min_uV; - selector = (min_uV - MAX1586_V3_MIN_UV) / MAX1586_V3_STEP_UV; - if (max1586_v3_calc_voltage(selector) > max_uV) + selector = ((min_uV - max1586->min_uV) * MAX1586_V3_MAX_VSEL + + range_uV - 1) / range_uV; + if (max1586_v3_calc_voltage(max1586, selector) > max_uV) return -EINVAL; dev_dbg(&client->dev, "changing voltage v3 to %dmv\n", - max1586_v3_calc_voltage(selector) / 1000); + max1586_v3_calc_voltage(max1586, selector) / 1000); v3_prog = I2C_V3_SELECT | (u8) selector; return i2c_smbus_write_byte(client, v3_prog); @@ -71,9 +89,11 @@ static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV) static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector) { + struct max1586_data *max1586 = rdev_get_drvdata(rdev); + if (selector > MAX1586_V3_MAX_VSEL) return -EINVAL; - return max1586_v3_calc_voltage(selector); + return max1586_v3_calc_voltage(max1586, selector); } /* @@ -164,14 +184,25 @@ static int max1586_pmic_probe(struct i2c_client *client, { struct regulator_dev **rdev; struct max1586_platform_data *pdata = client->dev.platform_data; - int i, id, ret = 0; + struct max1586_data *max1586; + int i, id, ret = -ENOMEM; + + max1586 = kzalloc(sizeof(struct max1586_data) + + sizeof(struct regulator_dev *) * (MAX1586_V6 + 1), + GFP_KERNEL); + if (!max1586) + goto out; - rdev = kzalloc(sizeof(struct regulator_dev *) * (MAX1586_V6 + 1), - GFP_KERNEL); - if (!rdev) - return -ENOMEM; + max1586->client = client; - ret = -EINVAL; + if (!pdata->v3_gain) { + ret = -EINVAL; + goto out_unmap; + } + max1586->min_uV = MAX1586_V3_MIN_UV * pdata->v3_gain / 1000000; + max1586->max_uV = MAX1586_V3_MAX_UV * pdata->v3_gain / 1000000; + + rdev = max1586->rdev; for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) { id = pdata->subdevs[i].id; if (!pdata->subdevs[i].platform_data) @@ -182,7 +213,7 @@ static int max1586_pmic_probe(struct i2c_client *client, } rdev[i] = regulator_register(&max1586_reg[id], &client->dev, pdata->subdevs[i].platform_data, - client); + max1586); if (IS_ERR(rdev[i])) { ret = PTR_ERR(rdev[i]); dev_err(&client->dev, "failed to register %s\n", @@ -198,7 +229,9 @@ static int max1586_pmic_probe(struct i2c_client *client, err: while (--i >= 0) regulator_unregister(rdev[i]); - kfree(rdev); +out_unmap: + kfree(max1586); +out: return ret; } diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h index 2056973396b..44563192bf1 100644 --- a/include/linux/regulator/max1586.h +++ b/include/linux/regulator/max1586.h @@ -26,6 +26,12 @@ #define MAX1586_V3 0 #define MAX1586_V6 1 +/* precalculated values for v3_gain */ +#define MAX1586_GAIN_NO_R24 1000000 /* 700000 .. 1475000 mV */ +#define MAX1586_GAIN_R24_3k32 1051098 /* 735768 .. 1550369 mV */ +#define MAX1586_GAIN_R24_5k11 1078648 /* 755053 .. 1591005 mV */ +#define MAX1586_GAIN_R24_7k5 1115432 /* 780802 .. 1645262 mV */ + /** * max1586_subdev_data - regulator data * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) @@ -43,10 +49,15 @@ struct max1586_subdev_data { * @num_subdevs: number of regultors used (may be 1 or 2) * @subdevs: regulator used * At most, there will be a regulator for V3 and one for V6 voltages. + * @v3_gain: gain on the V3 voltage output multiplied by 1e6. + * This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6) + * for an external resistor configuration as described in the + * data sheet (R25=100kOhm). */ struct max1586_platform_data { int num_subdevs; struct max1586_subdev_data *subdevs; + int v3_gain; }; #endif -- cgit v1.2.3