/* * linux/arch/arm/mach-omap1/board-voiceblue.c * * Modified from board-generic.c * * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl * * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway). * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern void omap_init_time(void); extern int omap_gpio_init(void); static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), .irq = OMAP_GPIO_IRQ(12), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, .uartclk = 3686400, }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), .irq = OMAP_GPIO_IRQ(13), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, .uartclk = 3686400, }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), .irq = OMAP_GPIO_IRQ(14), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, .uartclk = 3686400, }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), .irq = OMAP_GPIO_IRQ(15), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, .uartclk = 3686400, }, { }, }; static struct platform_device serial_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM1, .dev = { .platform_data = voiceblue_ports, }, }; static int __init ext_uart_init(void) { return platform_device_register(&serial_device); } arch_initcall(ext_uart_init); static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, .end = OMAP_CS2_PHYS + 0x300 + 16, .flags = IORESOURCE_MEM, }, [1] = { .start = OMAP_GPIO_IRQ(8), .end = OMAP_GPIO_IRQ(8), .flags = IORESOURCE_IRQ, }, }; static struct platform_device voiceblue_smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), .resource = voiceblue_smc91x_resources, }; static struct platform_device *voiceblue_devices[] __initdata = { &voiceblue_smc91x_device, }; static struct omap_usb_config voiceblue_usb_config __initdata = { .hmc_mode = 3, .register_host = 1, .register_dev = 1, .pins[0] = 2, .pins[1] = 6, .pins[2] = 6, }; static struct omap_board_config_kernel voiceblue_config[] = { { OMAP_TAG_USB, &voiceblue_usb_config }, }; static void __init voiceblue_init_irq(void) { omap_init_irq(); omap_gpio_init(); } static void __init voiceblue_init(void) { /* There is a good chance board is going up, so enable Power LED * (it is connected through invertor) */ omap_writeb(0x00, OMAP_LPG1_LCR); /* Watchdog */ omap_request_gpio(0); /* smc91x reset */ omap_request_gpio(7); omap_set_gpio_direction(7, 0); omap_set_gpio_dataout(7, 1); udelay(2); /* wait at least 100ns */ omap_set_gpio_dataout(7, 0); mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); /* 16C554 reset*/ omap_request_gpio(6); omap_set_gpio_direction(6, 0); omap_set_gpio_dataout(6, 0); /* 16C554 interrupt pins */ omap_request_gpio(12); omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE); omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE); omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); } static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; static void __init voiceblue_map_io(void) { omap_map_common_io(); omap_serial_init(omap_serial_ports); } #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 static unsigned long machine_state; static int panic_event(struct notifier_block *this, unsigned long event, void *ptr) { if (test_and_set_bit(MACHINE_PANICED, &machine_state)) return NOTIFY_DONE; /* Flash Power LED * (TODO: Enable clock right way (enabled in bootloader already)) */ omap_writeb(0x78, OMAP_LPG1_LCR); return NOTIFY_DONE; } static struct notifier_block panic_block = { .notifier_call = panic_event, }; static int __init setup_notifier(void) { /* Setup panic notifier */ notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } postcore_initcall(setup_notifier); static int wdt_gpio_state; void voiceblue_wdt_enable(void) { omap_set_gpio_direction(0, 0); omap_set_gpio_dataout(0, 0); omap_set_gpio_dataout(0, 1); omap_set_gpio_dataout(0, 0); wdt_gpio_state = 0; } void voiceblue_wdt_disable(void) { omap_set_gpio_dataout(0, 0); omap_set_gpio_dataout(0, 1); omap_set_gpio_dataout(0, 0); omap_set_gpio_direction(0, 1); } void voiceblue_wdt_ping(void) { if (test_bit(MACHINE_REBOOT, &machine_state)) return; wdt_gpio_state = !wdt_gpio_state; omap_set_gpio_dataout(0, wdt_gpio_state); } void voiceblue_reset(void) { set_bit(MACHINE_REBOOT, &machine_state); voiceblue_wdt_enable(); while (1) ; } EXPORT_SYMBOL(voiceblue_wdt_enable); EXPORT_SYMBOL(voiceblue_wdt_disable); EXPORT_SYMBOL(voiceblue_wdt_ping); MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl */ .phys_ram = 0x10000000, .phys_io = 0xfff00000, .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = voiceblue_map_io, .init_irq = voiceblue_init_irq, .init_machine = voiceblue_init, .timer = &omap_timer, MACHINE_END