mgcoge add the board-specific part of the HDLC driver

Signed-off-by: Gary Jennejohn <garyj@denx.de>

2 files changed, 278 insertions, 1 deletions

diff --git a/board/keymile/mgcoge/Makefile b/board/keymile/mgcoge/Makefile
index 0cad8210f..2774a702b 100644
--- a/board/keymile/mgcoge/Makefile
+++ b/board/keymile/mgcoge/Makefile
@@ -28,7 +28,8 @@ endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o ../common/common.o
+COBJS	:= $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
+		mgcoge_hdlc_enet.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/keymile/mgcoge/mgcoge_hdlc_enet.c b/board/keymile/mgcoge/mgcoge_hdlc_enet.c
new file mode 100644
index 000000000..34f04f562
--- /dev/null
+++ b/board/keymile/mgcoge/mgcoge_hdlc_enet.c
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on cpu/mpc8260/ether_scc.c.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+
+#include "../common/keymile_hdlc_enet.h"
+
+char keymile_slot;	/* our slot number in the backplane */
+
+/*
+ * Since, except during initialization, ethact is always HDLC ETHERNET
+ * while we're in the driver, just use serial_printf() everywhere for
+ * output.  This avoids possible conflicts when netconsole is being
+ * used.
+ */
+#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
+
+static int already_inited;
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t txbd;			/* Tx BD */
+    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
+void keymile_hdlc_enet_halt(struct eth_device *);
+extern void keymile_hdlc_enet_init_bds(RTXBD *);
+extern void initCachedNumbers(int);
+
+/* Use SCC1 */
+#define CPM_CR_SCC_PAGE		CPM_CR_SCC1_PAGE
+#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC1_SBLOCK
+#define CMXSCR_MASK		(CMXSCR_GR1|CMXSCR_SC1|\
+					CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define CMXSCR_VALUE		(CMXSCR_RS1CS_CLK11|CMXSCR_TS1CS_CLK11)
+#define MGC_PROFF_HDLC	PROFF_SCC1
+#define MGC_SCC_HDLC	0	/* Index, not number! */
+
+int keymile_hdlc_enet_init(struct eth_device *dev, bd_t *bis)
+{
+	/* int i; */
+	uint dpr;
+	/* volatile cbd_t *bdp; */
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile cpm8260_t *cp = &(im->im_cpm);
+	volatile scc_t *sccp;
+	volatile scc_hdlc_t *hpr;
+	volatile iop8260_t *iop;
+
+	if (already_inited)
+		return 0;
+
+	hpr = (scc_hdlc_t *)(&im->im_dprambase[MGC_PROFF_HDLC]);
+	sccp = (scc_t *)(&im->im_scc[MGC_SCC_HDLC]);
+	iop = &im->im_ioport;
+
+	/*
+	 * Disable receive and transmit just in case.
+	 */
+	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	/*
+	 * Avoid exhausting DPRAM, which would cause a panic.
+	 */
+	if (rtx == NULL) {
+		/* dpr is an offset into dpram */
+		dpr = m8260_cpm_dpalloc(sizeof(RTXBD), 8);
+		rtx = (RTXBD *)&im->im_dprambase[dpr];
+	}
+
+	/* We need the slot number for addressing. */
+	keymile_slot = *(char *)(CONFIG_SYS_SLOT_ID_BASE +
+		CONFIG_SYS_SLOT_ID_OFF) & CONFIG_SYS_SLOT_ID_MASK;
+	/*
+	 * Be consistent with the Linux driver and set
+	 * only enetaddr[0].
+	 *
+	 * Always add 1 to the slot number so that
+	 * there are no problems with an ethaddr which
+	 * is all 0s.  This should be acceptable because
+	 * a board should never have a slot number of 255,
+	 * which is the broadcast address.  The HDLC addressing
+	 * uses only the slot number.
+	 */
+	dev->enetaddr[0] = keymile_slot + 1;
+#ifdef TEST_IT
+	dprintf("slot %d\n", keymile_slot);
+#endif
+
+	/* use pd30, pd31 pins for TXD1, RXD1 respectively */
+	iop->iop_ppard |= (0x80000000 >> 30) | (0x80000000 >> 31);
+	iop->iop_pdird |= (0x80000000 >> 30);
+	iop->iop_psord |= (0x80000000 >> 30);
+
+	/* use pc21 as CLK11 */
+	iop->iop_pparc |= (0x80000000 >> 21);
+	iop->iop_pdirc &= ~(0x80000000 >> 21);
+	iop->iop_psorc &= ~(0x80000000 >> 21);
+
+	/* use pc15 as CTS1 */
+	iop->iop_pparc |= (0x80000000 >> 15);
+	iop->iop_pdirc &= ~(0x80000000 >> 15);
+	iop->iop_psorc &= ~(0x80000000 >> 15);
+
+	/*
+	 * SI clock routing
+	 * use CLK11
+	 * this also connects SCC1 to NMSI
+	 */
+	im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
+		CMXSCR_VALUE;
+
+	/* keymile_rxIdx = 0; */
+
+	/*
+	 * Initialize function code registers for big-endian.
+	 */
+	hpr->sh_genscc.scc_rfcr = CPMFCR_EB;
+	hpr->sh_genscc.scc_tfcr = CPMFCR_EB;
+
+	/*
+	 * Set maximum bytes per receive buffer.
+	 */
+	hpr->sh_genscc.scc_mrblr = MAX_FRAME_LENGTH;
+
+	/* Setup CRC generator values for HDLC */
+	hpr->sh_cmask = 0x0000F0B8;
+	hpr->sh_cpres = 0x0000FFFF;
+
+	/* Initialize all error counters to 0 */
+	hpr->sh_disfc = 0;
+	hpr->sh_crcec = 0;
+	hpr->sh_abtsc = 0;
+	hpr->sh_nmarc = 0;
+	hpr->sh_retrc = 0;
+
+	/* Set maximum frame length size */
+	hpr->sh_mflr = MAX_FRAME_LENGTH;
+
+	/* set to 1 for per frame processing change later if needed */
+	hpr->sh_rfthr = 1;
+
+	hpr->sh_hmask = 0xff;
+
+	hpr->sh_haddr2 = SET_HDLC_UUA(keymile_slot);
+	hpr->sh_haddr3 = hpr->sh_haddr2;
+	hpr->sh_haddr4 = hpr->sh_haddr2;
+	/* broadcast */
+	hpr->sh_haddr1 = HDLC_BCAST;
+
+	hpr->sh_genscc.scc_rbase = (unsigned int) &rtx->rxbd[0];
+	hpr->sh_genscc.scc_tbase = (unsigned int) &rtx->txbd;
+
+#if 0
+	/*
+	 * Initialize the buffer descriptors.
+	 */
+	bdp = &rtx->txbd;
+	bdp->cbd_sc = 0;
+	bdp->cbd_bufaddr = 0;
+	bdp->cbd_sc = BD_SC_WRAP;
+
+	/*
+	 *	Setup RX packet buffers, aligned correctly.
+	 *	Borrowed from net/net.c.
+	 */
+	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
+	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
+	for (i = 1; i < HDLC_PKTBUFSRX; i++)
+		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
+
+	bdp = &rtx->rxbd[0];
+	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
+		bdp->cbd_sc = BD_SC_EMPTY;
+		/* Leave space at the start for INET header. */
+		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
+			INET_HDR_ALIGN);
+		bdp++;
+	}
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+#else
+	keymile_hdlc_enet_init_bds(rtx);
+#endif
+
+	/* Let's re-initialize the channel now.	 We have to do it later
+	 * than the manual describes because we have just now finished
+	 * the BD initialization.
+	 */
+	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
+					0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+	while (cp->cp_cpcr & CPM_CR_FLG);
+
+	sccp->scc_gsmrl = SCC_GSMRL_MODE_HDLC;
+	/* CTSS=1 */
+	sccp->scc_gsmrh = SCC_GSMRH_CTSS;
+	/* NOF=0, RTE=1, DRT=0, BUS=1 */
+	sccp->scc_psmr = ((0x8000 >> 6) | (0x8000 >> 10));
+
+/* loopback for local testing */
+#ifdef GJTEST
+	dprintf("LOOPBACK!\n");
+	sccp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+#endif
+
+	/*
+	 * Disable all interrupts and clear all pending
+	 * events.
+	 */
+	sccp->scc_sccm = 0;
+	sccp->scc_scce = 0xffff;
+
+	/*
+	 * And last, enable the transmit and receive processing.
+	 */
+	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	dprintf("%s: HDLC ENET Version 0.3 on SCC%d\n", dev->name,
+		MGC_SCC_HDLC + 1);
+
+	/*
+	 * We may not get an ARP packet because ARP was already done on
+	 * a different interface, so initialize the cached values now.
+	 */
+	initCachedNumbers(1);
+
+	already_inited = 1;
+
+	return 0;
+}
+
+void keymile_hdlc_enet_halt(struct eth_device *dev)
+{
+#if 0 /* just return, but keep this for reference */
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+	/* maybe should do a graceful stop here? */
+	immr->im_scc[MGC_SCC_HDLC].scc_gsmrl &=
+		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+}
+
+#endif /* CONFIG_MGCOGE_HDLC_ENET */