Initial revision

3 files changed, 414 insertions, 0 deletions

diff --git a/common/cmd_spi.c b/common/cmd_spi.c
new file mode 100644
index 000000000..ccf9cc287
--- /dev/null
+++ b/common/cmd_spi.c
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2002
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * SPI Read/Write Utilities
+ */
+
+#include <common.h>
+#include <command.h>
+#include <spi.h>
+#include <cmd_spi.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_SPI)
+
+#define MAX_SPI_BYTES	32	/* max number of bytes we can handle */
+
+/*
+ * External table of chip select functions (see the appropriate board
+ * support for the actual definition of the table).
+ */
+extern spi_chipsel_type spi_chipsel[];
+
+
+/*
+ * Values from last command.
+ */
+static int   device;
+static int   bitlen;
+static uchar dout[MAX_SPI_BYTES];
+static uchar din[MAX_SPI_BYTES];
+
+/*
+ * SPI read/write
+ *
+ * Syntax:
+ *   spi {dev} {num_bits} {dout}
+ *     {dev} is the device number for controlling chip select (see TBD)
+ *     {num_bits} is the number of bits to send & receive (base 10)
+ *     {dout} is a hexadecimal string of data to send
+ * The command prints out the hexadecimal string received via SPI.
+ */
+
+int do_spi (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+	char  *cp = 0;
+	uchar tmp;
+	int   j;
+	int   rcode = 0;
+
+	/*
+	 * We use the last specified parameters, unless new ones are
+	 * entered.
+	 */
+
+	if ((flag & CMD_FLAG_REPEAT) == 0)
+	{
+		if (argc >= 2)
+			device = simple_strtoul(argv[1], NULL, 10);
+		if (argc >= 3)
+			bitlen = simple_strtoul(argv[2], NULL, 10);
+		if (argc >= 4)
+		cp = argv[3];
+		for(j = 0; *cp; j++, cp++) {
+			tmp = *cp - '0';
+			if(tmp > 9)
+				tmp -= ('A' - '0') - 10;
+			if(tmp > 15)
+				tmp -= ('a' - 'A');
+			if(tmp > 15) {
+				printf("Conversion error on %c, bailing out.\n", *cp);
+				break;
+			}
+			if((j % 2) == 0)
+				dout[j / 2] = (tmp << 4);
+			else
+				dout[j / 2] |= tmp;
+		}
+	}
+
+printf("spi_chipsel[%d] = %08X\n", device, (uint)spi_chipsel[device]);
+	if(spi_xfer(spi_chipsel[device], bitlen, dout, din) != 0) {
+		printf("Error with the SPI transaction.\n");
+		rcode = 1;
+	} else {
+		cp = din;
+		for(j = 0; j < ((bitlen + 7) / 8); j++) {
+			printf("%02X", *cp++);
+		}
+		printf("\n");
+	}
+
+	return rcode;
+}
+
+#endif	/* CFG_CMD_SPI */
+
diff --git a/common/soft_spi.c b/common/soft_spi.c
new file mode 100644
index 000000000..a5b62f28e
--- /dev/null
+++ b/common/soft_spi.c
@@ -0,0 +1,138 @@
+/*
+ * (C) Copyright 2002
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
+ *
+ * Influenced by code from:
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+
+#if defined(CONFIG_SOFT_SPI)
+
+#define DEBUG_SPI
+
+
+/*-----------------------------------------------------------------------
+ * Definitions
+ */
+
+#ifdef DEBUG_SPI
+#define PRINTD(fmt,args...)	printf (fmt ,##args)
+#else
+#define PRINTD(fmt,args...)
+#endif
+
+
+
+/*=====================================================================*/
+/*                         Public Functions                            */
+/*=====================================================================*/
+
+/*-----------------------------------------------------------------------
+ * Initialization
+ */
+void spi_init (void)
+{
+#ifdef	SPI_INIT
+	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+
+	SPI_INIT;
+#endif
+}
+
+
+/*-----------------------------------------------------------------------
+ * SPI transfer
+ *
+ * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks
+ * "bitlen" bits in the SPI MISO port.  That's just the way SPI works.
+ *
+ * The source of the outgoing bits is the "dout" parameter and the
+ * destination of the input bits is the "din" parameter.  Note that "dout"
+ * and "din" can point to the same memory location, in which case the
+ * input data overwrites the output data (since both are buffered by
+ * temporary variables, this is OK).
+ *
+ * If the chipsel() function is not NULL, it is called with a parameter
+ * of '1' (chip select active) at the start of the transfer and again with
+ * a parameter of '0' at the end of the transfer.
+ *
+ * If the chipsel() function _is_ NULL, it the responsibility of the
+ * caller to make the appropriate chip select active before calling
+ * spi_xfer() and making it inactive after spi_xfer() returns.
+ */
+int  spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+{
+	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	uchar tmpdin  = 0;
+	uchar tmpdout = 0;
+	int   j;
+
+	PRINTD("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
+		(int)chipsel, *(uint *)dout, *(uint *)din, bitlen);
+
+	if(chipsel != NULL) {
+		(*chipsel)(1);	/* select the target chip */
+	}
+
+	for(j = 0; j < bitlen; j++) {
+		/*
+		 * Check if it is time to work on a new byte.
+		 */
+		if((j % 8) == 0) {
+			tmpdout = *dout++;
+			if(j != 0) {
+				*din++ = tmpdin;
+			}
+			tmpdin  = 0;
+		}
+		SPI_SCL(0);
+		SPI_SDA(tmpdout & 0x80);
+		SPI_DELAY;
+		SPI_SCL(1);
+		SPI_DELAY;
+		tmpdin  <<= 1;
+		tmpdin   |= SPI_READ;
+		tmpdout <<= 1;
+	}
+	/*
+	 * If the number of bits isn't a multiple of 8, shift the last
+	 * bits over to left-justify them.  Then store the last byte
+	 * read in.
+	 */
+	if((bitlen % 8) != 0)
+		tmpdin <<= 8 - (bitlen % 8);
+	*din++ = tmpdin;
+
+	SPI_SCL(0);		/* SPI wants the clock left low for idle */
+
+	if(chipsel != NULL) {
+		(*chipsel)(0);	/* deselect the target chip */
+
+	}
+
+	return(0);
+}
+
+#endif	/* CONFIG_SOFT_SPI */
+
diff --git a/cpu/mpc8260/status_led.c b/cpu/mpc8260/status_led.c
new file mode 100644
index 000000000..0174e3991
--- /dev/null
+++ b/cpu/mpc8260/status_led.c
@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <status_led.h>
+
+/*
+ * The purpose of this code is to signal the operational status of a
+ * target which usually boots over the network; while running in
+ * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
+ * message has been received, the LED is turned off. The Linux
+ * kernel, once it is running, will start blinking the LED again,
+ * with another frequency.
+ */
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_STATUS_LED
+
+typedef struct {
+	ulong	mask;
+	int	state;
+	int	period;
+	int	cnt;
+} led_dev_t;
+
+led_dev_t led_dev[] = {
+    {	STATUS_LED_BIT,
+	STATUS_LED_STATE,
+	STATUS_LED_PERIOD,
+	0,
+    },
+#if defined(STATUS_LED_BIT1)
+    {	STATUS_LED_BIT1,
+	STATUS_LED_STATE1,
+	STATUS_LED_PERIOD1,
+	0,
+    },
+#endif
+#if defined(STATUS_LED_BIT2)
+    {	STATUS_LED_BIT2,
+	STATUS_LED_STATE2,
+	STATUS_LED_PERIOD2,
+	0,
+    },
+#endif
+};
+
+#define MAX_LED_DEV	(sizeof(led_dev)/sizeof(led_dev_t))
+
+static int status_led_init_done = 0;
+
+static void status_led_init (void)
+{
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    int i;
+
+    for (i=0; i<MAX_LED_DEV; ++i) {
+	led_dev_t *ld = &led_dev[i];
+
+	immr->STATUS_LED_PAR &= ~(ld->mask);
+#ifdef STATUS_LED_ODR
+	immr->STATUS_LED_ODR &= ~(ld->mask);
+#endif
+#if (STATUS_LED_ACTIVE == 0)
+	if (ld->state == STATUS_LED_ON)
+		immr->STATUS_LED_DAT &= ~(ld->mask);
+	else
+		immr->STATUS_LED_DAT |=   ld->mask ;
+#else
+	if (ld->state == STATUS_LED_ON)
+		immr->STATUS_LED_DAT |=   ld->mask ;
+	else
+		immr->STATUS_LED_DAT &= ~(ld->mask);
+#endif
+	immr->STATUS_LED_DIR |=   ld->mask ;
+    }
+
+    status_led_init_done  = 1;
+}
+
+void status_led_tick (ulong timestamp)
+{
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    int i;
+
+    if (!status_led_init_done)
+	status_led_init();
+
+    for (i=0; i<MAX_LED_DEV; ++i) {
+	led_dev_t *ld = &led_dev[i];
+
+	if (ld->state != STATUS_LED_BLINKING)
+		continue;
+
+	if (++(ld->cnt) >= ld->period) {
+		immr->STATUS_LED_DAT ^= ld->mask;
+		ld->cnt -= ld->period;
+	}
+    }
+}
+
+void status_led_set (int led, int state)
+{
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    led_dev_t *ld;
+
+    if (led < 0 || led >= MAX_LED_DEV)
+	return;
+
+    if (!status_led_init_done)
+	status_led_init();
+
+    ld = &led_dev[led];
+
+    switch (state) {
+    default:
+	return;
+    case STATUS_LED_BLINKING:
+	ld->cnt = 0;		/* always start with full period	*/
+	/* fall through */	/* always start with LED _ON_		*/
+    case STATUS_LED_ON:
+#if (STATUS_LED_ACTIVE == 0)
+	immr->STATUS_LED_DAT &= ~(ld->mask);
+#else
+	immr->STATUS_LED_DAT |=   ld->mask ;
+#endif
+	break;
+    case STATUS_LED_OFF:
+#if (STATUS_LED_ACTIVE == 0)
+	immr->STATUS_LED_DAT |=   ld->mask ;
+#else
+	immr->STATUS_LED_DAT &= ~(ld->mask);
+#endif
+	break;
+    }
+    ld->state = state;
+}
+
+#endif	/* CONFIG_STATUS_LED */