diff options
author | wdenk <wdenk> | 2003-07-14 22:13:32 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2003-07-14 22:13:32 +0000 |
commit | 8564acf936726c5568d71e4fa93a0ae9814e0d07 (patch) | |
tree | 05fa981555adf1d333970f3d52d0683008fe3cfb /board/mpc8260ads/flash.c | |
parent | 5702923e23238df6c6f62d53f73863462ae62f4e (diff) |
* Patches by Yuli Barcohen, 13 Jul 2003:
- Correct flash and JFFS2 support for MPC8260ADS
- fix PVR values and clock generation for PowerQUICC II family
(8270/8275/8280)
* Patch by Bernhard Kuhn, 08 Jul 2003:
- add support for M68K targets
* Patch by Ken Chou, 3 Jul:
- Fix PCI config table for A3000
- Fix iobase for natsemi.c
(PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
* Allow to enable "slow" POST routines by key press on power-on
* Fix temperature dependend switching of LCD backlight on LWMON
* Tweak output format for LWMON
Diffstat (limited to 'board/mpc8260ads/flash.c')
-rw-r--r-- | board/mpc8260ads/flash.c | 498 |
1 files changed, 269 insertions, 229 deletions
diff --git a/board/mpc8260ads/flash.c b/board/mpc8260ads/flash.c index d61bfc646..b2e9df243 100644 --- a/board/mpc8260ads/flash.c +++ b/board/mpc8260ads/flash.c @@ -7,6 +7,11 @@ * I started with board/ip860/flash.c and made changes I found in * the MTD project by David Schleef. * + * (C) Copyright 2003 Arabella Software Ltd. + * Yuli Barcohen <yuli@arabellasw.com> + * Re-written to support multi-bank flash SIMMs. + * Added support for real protection and JFFS2. + * * See file CREDITS for list of people who contributed to this * project. * @@ -28,73 +33,119 @@ #include <common.h> +/* Intel-compatible flash ID */ +#define INTEL_COMPAT 0x89898989 +#define INTEL_ALT 0xB0B0B0B0 -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x10101010 +#define INTEL_ERASE 0x20202020 +#define INTEL_CLEAR 0x50505050 +#define INTEL_LOCKBIT 0x60606060 +#define INTEL_PROTECT 0x01010101 +#define INTEL_STATUS 0x70707070 +#define INTEL_READID 0x90909090 +#define INTEL_CONFIRM 0xD0D0D0D0 +#define INTEL_RESET 0xFFFFFFFF -#if defined(CFG_ENV_IS_IN_FLASH) -# ifndef CFG_ENV_ADDR -# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) -# endif -# ifndef CFG_ENV_SIZE -# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE -# endif -# ifndef CFG_ENV_SECT_SIZE -# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE -# endif -#endif +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x80808080 +#define INTEL_OK 0x80808080 -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static int clear_block_lock_bit(vu_long * addr); +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- + * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.) + * Up to 32MB of flash supported (up to 4 banks.) + * BCSR is used for flash presence detect (page 4-65 of the User's Manual) + * + * The following code can not run from flash! */ - unsigned long flash_init (void) { -#ifndef CONFIG_MPC8260ADS - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; -#endif - unsigned long size; - int i; - - /* Init: enable write, - * or we cannot even write flash commands - */ -#ifndef CONFIG_MPC8260ADS - bcsr->bd_ctrl |= BD_CTRL_FLWE; -#endif - - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - - /* set the default sector offset */ + ulong size = 0, sect_start, sect_size = 0, bank_size; + ushort sect_count = 0; + int i, j, nbanks; + vu_long *addr = (vu_long *)CFG_FLASH_BASE; + vu_long *bcsr = (vu_long *)CFG_BCSR; + + switch (bcsr[2] & 0xF) { + case 0: + nbanks = 4; + break; + case 1: + nbanks = 2; + break; + case 2: + nbanks = 1; + break; + default: /* Unsupported configurations */ + nbanks = CFG_MAX_FLASH_BANKS; } - /* Static FLASH Bank configuration here - FIXME XXX */ - - size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size<<20); + if (nbanks > CFG_MAX_FLASH_BANKS) + nbanks = CFG_MAX_FLASH_BANKS; + + for (i = 0; i < nbanks; i++) { + *addr = INTEL_READID; /* Read Intelligent Identifier */ + if ((addr[0] == INTEL_COMPAT) || (addr[0] == INTEL_ALT)) { + switch (addr[1]) { + case SHARP_ID_28F016SCL: + case SHARP_ID_28F016SCZ: + flash_info[i].flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT; + sect_count = 32; + sect_size = 0x40000; + break; + default: + flash_info[i].flash_id = FLASH_UNKNOWN; + sect_count = CFG_MAX_FLASH_SECT; + sect_size = + CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS / CFG_MAX_FLASH_SECT; + } + } + else + flash_info[i].flash_id = FLASH_UNKNOWN; + if (flash_info[i].flash_id == FLASH_UNKNOWN) { + printf("### Unknown flash ID %08lX %08lX at address %08lX ###\n", + addr[0], addr[1], (ulong)addr); + size = 0; + *addr = INTEL_RESET; /* Reset bank to Read Array mode */ + break; + } + flash_info[i].sector_count = sect_count; + flash_info[i].size = bank_size = sect_size * sect_count; + size += bank_size; + sect_start = (ulong)addr; + for (j = 0; j < sect_count; j++) { + addr = (vu_long *)sect_start; + flash_info[i].start[j] = sect_start; + flash_info[i].protect[j] = (addr[2] == 0x01010101); + sect_start += sect_size; + } + *addr = INTEL_RESET; /* Reset bank to Read Array mode */ + addr = (vu_long *)sect_start; } -#ifndef CONFIG_MPC8260ADS - /* Remap FLASH according to real size */ - memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) | - (memctl->memc_br1 & ~(BR_BA_MSK)); -#endif - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size; + if (size == 0) { /* Unknown flash, fill with hard-coded values */ + sect_start = CFG_FLASH_BASE; + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].size = CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS; + flash_info[i].sector_count = sect_count; + for (j = 0; j < sect_count; j++) { + flash_info[i].start[j] = sect_start; + flash_info[i].protect[j] = 0; + sect_start += sect_size; + } + } + size = CFG_FLASH_SIZE; + } + else + for (i = nbanks; i < CFG_MAX_FLASH_BANKS; i++) { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].size = 0; + flash_info[i].sector_count = 0; + } #if CFG_MONITOR_BASE >= CFG_FLASH_BASE /* monitor protection ON by default */ @@ -161,102 +212,6 @@ void flash_print_info (flash_info_t *info) /*----------------------------------------------------------------------- */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - ulong sector_offset; - - /* Write "Intelligent Identifier" command: read Manufacturer ID */ - *addr = 0x90909090; - - value = addr[0] & 0x00FF00FF; - switch (value) { - case MT_MANUFACT: /* SHARP, MT or => Intel */ - case INTEL_ALT_MANU: - info->flash_id = FLASH_MAN_INTEL; - break; - default: - printf("unknown manufacturer: %x\n", (unsigned int)value); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case (INTEL_ID_28F016S): - info->flash_id += FLASH_28F016SV; - info->sector_count = 32; - info->size = 0x00400000; - sector_offset = 0x20000; - break; /* => 2x2 MB */ - - case (INTEL_ID_28F160S3): - info->flash_id += FLASH_28F160S3; - info->sector_count = 32; - info->size = 0x00400000; - sector_offset = 0x20000; - break; /* => 2x2 MB */ - - case (INTEL_ID_28F320S3): - info->flash_id += FLASH_28F320S3; - info->sector_count = 64; - info->size = 0x00800000; - sector_offset = 0x20000; - break; /* => 2x4 MB */ - - case SHARP_ID_28F016SCL: - case SHARP_ID_28F016SCZ: - info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT; - info->sector_count = 32; - info->size = 0x00800000; - sector_offset = 0x40000; - break; /* => 4x2 MB */ - - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += sector_offset; - /* don't know how to check sector protection */ - info->protect[i] = 0; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (vu_long *)info->start[0]; - - *addr = 0xFFFFFF; /* reset bank to read array mode */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; @@ -292,12 +247,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - /* Make Sure Block Lock Bit is not set. */ - if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){ - return 1; - } - - /* Start erase on unprotected sectors */ for (sect = s_first; sect<=s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ @@ -308,36 +257,26 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); - /* Reset Array */ - *addr = 0xffffffff; /* Clear Status Register */ - *addr = 0x50505050; + *addr = INTEL_CLEAR; /* Single Block Erase Command */ - *addr = 0x20202020; + *addr = INTEL_ERASE; /* Confirm */ - *addr = 0xD0D0D0D0; + *addr = INTEL_CONFIRM; if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { /* Resume Command, as per errata update */ - *addr = 0xD0D0D0D0; + *addr = INTEL_CONFIRM; } /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - while ((*addr & 0x80808080) != 0x80808080) { - if(*addr & 0x20202020){ - printf("Error in Block Erase - Lock Bit may be set!\n"); - printf("Status Register = 0x%X\n", (uint)*addr); - *addr = 0xFFFFFFFF; /* reset bank */ - return 1; - } + while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { printf ("Timeout\n"); - *addr = 0xFFFFFFFF; /* reset bank */ + *addr = INTEL_RESET; /* reset bank */ return 1; } /* show that we're waiting */ @@ -347,8 +286,15 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) } } + if (*addr != INTEL_OK) { + printf("Block erase failed at %08X, CSR=%08X\n", + (uint)addr, (uint)*addr); + *addr = INTEL_RESET; /* reset bank */ + return 1; + } + /* reset to read mode */ - *addr = 0xFFFFFFFF; + *addr = INTEL_RESET; } } @@ -357,6 +303,58 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) } /*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t *info, ulong dest, ulong data) +{ + ulong start; + int rc = 0; + int flag; + vu_long *addr = (vu_long *)dest; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + return (2); + } + + *addr = INTEL_CLEAR; /* Clear status register */ + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Write Command */ + *addr = INTEL_PROGRAM; + + /* Write Data */ + *addr = data; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer (0); + while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + printf("Write timed out\n"); + rc = 1; + break; + } + } + if (*addr != INTEL_OK) { + printf ("Write failed at %08X, CSR=%08X\n", (uint)addr, (uint)*addr); + rc = 1; + } + + *addr = INTEL_RESET; /* Reset to read array mode */ + + return rc; +} + +/*----------------------------------------------------------------------- * Copy memory to flash, returns: * 0 - OK * 1 - write timeout @@ -370,6 +368,8 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) wp = (addr & ~3); /* get lower word aligned address */ + *(vu_long *)wp = INTEL_RESET; /* Reset to read array mode */ + /* * handle unaligned start bytes */ @@ -424,85 +424,125 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) data = (data << 8) | (*(uchar *)cp); } - return (write_word(info, wp, data)); + rc = write_word(info, wp, data); + + return rc; } /*----------------------------------------------------------------------- - * Write a word to Flash, returns: + * Set/Clear sector's lock bit, returns: * 0 - OK - * 1 - write timeout - * 2 - Flash not erased + * 1 - Error (timeout, voltage problems, etc.) */ -static int write_word (flash_info_t *info, ulong dest, ulong data) +int flash_real_protect(flash_info_t *info, long sector, int prot) { - vu_long *addr = (vu_long *)dest; - ulong start, csr; - int flag; + ulong start; + int i; + int rc = 0; + vu_long *addr = (vu_long *)(info->start[sector]); + int flag = disable_interrupts(); + + *addr = INTEL_CLEAR; /* Clear status register */ + if (prot) { /* Set sector lock bit */ + *addr = INTEL_LOCKBIT; /* Sector lock bit */ + *addr = INTEL_PROTECT; /* set */ + } + else { /* Clear sector lock bit */ + *addr = INTEL_LOCKBIT; /* All sectors lock bits */ + *addr = INTEL_CONFIRM; /* clear */ + } - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - return (2); + start = get_timer(0); + while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + printf("Flash lock bit operation timed out\n"); + rc = 1; + break; + } } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - /* Write Command */ - *addr = 0x10101010; + if (*addr != INTEL_OK) { + printf("Flash lock bit operation failed at %08X, CSR=%08X\n", + (uint)addr, (uint)*addr); + rc = 1; + } - /* Write Data */ - *addr = data; + if (!rc) + info->protect[sector] = prot; + + /* + * Clear lock bit command clears all sectors lock bits, so + * we have to restore lock bits of protected sectors. + */ + if (!prot) + for (i = 0; i < info->sector_count; i++) + if (info->protect[i]) { + addr = (vu_long *)(info->start[i]); + *addr = INTEL_LOCKBIT; /* Sector lock bit */ + *addr = INTEL_PROTECT; /* set */ + udelay(CFG_FLASH_LOCK_TOUT * 1000); + } - /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); - /* data polling for D7 */ - start = get_timer (0); - flag = 0; - while (((csr = *addr) & 0x80808080) != 0x80808080) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - flag = 1; - break; - } - } - if (csr & 0x40404040) { - printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr); - flag = 1; - } - - /* Clear Status Registers Command */ - *addr = 0x50505050; - /* Reset to read array mode */ - *addr = 0xFFFFFFFF; + *addr = INTEL_RESET; /* Reset to read array mode */ - return (flag); + return rc; } /*----------------------------------------------------------------------- - * Clear Block Lock Bit, returns: - * 0 - OK - * 1 - Timeout + * Support for flash file system (JFFS2) + * + * We use custom partition info function because we have to fit the + * file system image between first sector (containing hard reset + * configuration word) and the sector containing U-Boot image. Standard + * partition info function does not allow for last sector specification + * and assumes that the file system occupies flash bank up to and + * including bank's last sector. */ +#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CFG_JFFS_CUSTOM_PART) -static int clear_block_lock_bit(vu_long * addr) -{ - ulong start, now; +#ifndef CFG_JFFS2_FIRST_SECTOR +#define CFG_JFFS2_FIRST_SECTOR 0 +#endif +#ifndef CFG_JFFS2_FIRST_BANK +#define CFG_JFFS2_FIRST_BANK 0 +#endif +#ifndef CFG_JFFS2_NUM_BANKS +#define CFG_JFFS2_NUM_BANKS 1 +#endif +#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1) - /* Reset Array */ - *addr = 0xffffffff; - /* Clear Status Register */ - *addr = 0x50505050; +#include <jffs2/jffs2.h> - *addr = 0x60606060; - *addr = 0xd0d0d0d0; +static struct part_info partition; - start = get_timer (0); - while(*addr != 0x80808080){ - if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout on clearing Block Lock Bit\n"); - *addr = 0xFFFFFFFF; /* reset bank */ - return 1; +struct part_info *jffs2_part_info(int part_num) +{ + int i; + + if (part_num == 0) { + if (partition.usr_priv == 0) { + partition.offset = + (unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR]; + for (i = CFG_JFFS2_FIRST_BANK; i <= CFG_JFFS2_LAST_BANK; i++) + partition.size += flash_info[i].size; + partition.size -= + flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR] - + flash_info[CFG_JFFS2_FIRST_BANK].start[0]; +#ifdef CFG_JFFS2_LAST_SECTOR + i = flash_info[CFG_JFFS2_LAST_BANK].sector_count - 1; + partition.size -= + flash_info[CFG_JFFS2_LAST_BANK].start[i] - + flash_info[CFG_JFFS2_LAST_BANK].start[CFG_JFFS2_LAST_SECTOR]; +#endif + + partition.usr_priv = (void *)1; } + return &partition; } return 0; } + +#endif /* JFFS2 */ |