diff options
| author | wdenk <wdenk> | 2005-01-12 00:38:03 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2005-01-12 00:38:03 +0000 |
| commit | 5a95f6fbd21c542a6df0a41fb827ad7e7c9b17d8 (patch) | |
| tree | 3e01df2db1ded87b4a8ced9ab2011fbf5056bcb8 /board/omap2420h4/mem.c | |
| parent | 289f932c5ff628bf21a05073243071a01a2d3b02 (diff) | |
* Patch by Robin Getz, 13 Oct 2004:
Add standalone application to change SMC91C111 MAC addresses,
see examples/README.smc91111_eeprom
* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
Fix Flash support for ARM Integrator CP.
Diffstat (limited to 'board/omap2420h4/mem.c')
| -rw-r--r-- | board/omap2420h4/mem.c | 22 |
1 files changed, 10 insertions, 12 deletions
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c index 3ce38cc4d..9ae595b3c 100644 --- a/board/omap2420h4/mem.c +++ b/board/omap2420h4/mem.c @@ -74,9 +74,9 @@ void prcm_init(void) if(running_in_sram()){ /* If running fully from SRAM this is OK. The Flash bus drops out for just a little. - * but then comes back. If running from Flash this sequence kills you, thus you need - * to run it using CONFIG_PARTIAL_SRAM. - */ + * but then comes back. If running from Flash this sequence kills you, thus you need + * to run it using CONFIG_PARTIAL_SRAM. + */ __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */ wait_on_value(BIT0|BIT1, BIT0, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */ sdelay(1000); @@ -172,14 +172,13 @@ void do_sdrc_init(u32 offset, u32 early) cpu = get_cpu_type(); /* warning generated, though code generation is correct. this may bite later, - * but is ok for now. there is only so much C code you can do on stack only - * operation. + * but is ok for now. there is only so much C code you can do on stack only + * operation. */ if (cpu == CPU_2422){ sdata = (sdrc_data_t *)&sdrc_2422; pass_type = STACKED; - } - else{ + } else{ sdata = (sdrc_data_t *)&sdrc_2420; pass_type = IP_DDR; } @@ -187,10 +186,10 @@ void do_sdrc_init(u32 offset, u32 early) __asm__ __volatile__("": : :"memory"); /* limit compiler scope */ /* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx. - * If we are running in flash prior to relocation and we use data - * here which is not pc relative we need to get the address correct. - * We need to find the current flash mapping to dress up the initial - * pointer load. As long as this is const data we should be ok. + * If we are running in flash prior to relocation and we use data + * here which is not pc relative we need to get the address correct. + * We need to find the current flash mapping to dress up the initial + * pointer load. As long as this is const data we should be ok. */ if((early) && running_in_flash()){ sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base()); @@ -344,4 +343,3 @@ void gpmc_init(void) __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */ sdelay(2000); } - |