Replace MMC/SD driver to fit new framework.

IR265772: MMC driver does not detect SDHC cards.

IR254201: Restructure MMC/SD driver for U8500 board according to the
block device framework in mainline U-Boot.

Changes to mmc framework:
- Multi Block Read support in mmc framework.
- Wrap Multi Block Write/Read to be able to adopt for large transaction.
- Removed incorrect check in EXT CSD for high capacity MMC.
- Corrected check for high capacity SD cards.
- Set MMC buswidth to 8, prio of using 4.

Known limitations/bugs in mmc framework:
- High capacity MMC, will likely not get the correct density.
- High speed is set, whether or not the host supports it or not.

board/st/u8500/mmc_utils:
IMPORTANT FOR DEVELOPERS:
- Removed unessary U-Boot commands which is already supported in
  cmd_fat.
- mmc_read_cmd_file: Read command.txt into bootcmd env from FAT FS in
  SD card.
- write_partition_block: Writes the MBR if it is not already written.

board/st/u8500/mmc_host[c.h]:
- Implements the entire MMC/SD host driver for the PL180 block.
- There is still room for optimization:
	Increase CLK-speed.
	Use  high-speed for SD cards.
	Is GPIO setup correctly for both cards an eMMC.
	EarlyDrop support not fully tested.
	Dynamically turn on voltage/clocks to SD, not always.
	More...

Note:
- Increased read/write performance for eMMC, to around 5.4 MB/s for
  sequential read/write. Earlier measurements was 3.5 MB/s for read and
  2.6 MB/s for write.

ST-Ericsson ID: ER265772, CR267996, ER267993

Change-Id: I921102edbde761407ff5ad476d1bb99f5dc7a2ef
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2288
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com>
Tested-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com>
Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>
Tested-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>

1 files changed, 0 insertions, 43 deletions

diff --git a/board/st/u8500/init_mmc.h b/board/st/u8500/init_mmc.h
deleted file mode 100755
index b66f866f8..000000000
--- a/board/st/u8500/init_mmc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __INIT_MMC_H
-#define __INIT_MMC_H
-#define PUBLIC        /* Extern by default */
-
-#include <common.h>
-
-typedef void    (*t_callback_fct) (u32);
-typedef struct
-{
-    t_callback_fct  fct;
-    u32        param;
-}   t_callback; 
-
-static int init_mmc(void);
-int  init_mmc_fat(void); 
-t_mmc_error mmc_fat_read_file    (char *, u32, u32);
-int mmc_hw_init (void);
-unsigned long mmc_block_read(int dev,unsigned long blknr,lbaint_t blkcnt,void *dest);
-
-
-#endif /* !defined(__INIT_MMC_H) */