* Patch by Martin Winistoerfer, 23 Mar 2003

  - Add port to MPC555/556 microcontrollers
  - Add support for cmi customer board with
    Intel 28F128J3A, 28F320J3A or 28F640J3A flash.

* Patch by Rick Bronson, 28 Mar 2003:
  - fix common/cmd_nand.c

1 files changed, 256 insertions, 0 deletions

diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
new file mode 100644
index 000000000..e8b3eb5d8
--- /dev/null
+++ b/include/configs/cmi_mpc5xx.h
@@ -0,0 +1,256 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 
+ */
+
+/*
+ * File:		cmi_mpc5xx.h
+ * 
+ * Discription:		Config header file for cmi 
+ * 			board  using an MPC5xx CPU
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_MPC555		1		/* This is an MPC555 CPU		*/
+#define CONFIG_CMI		1		/* Using the customized cmi board 	*/
+
+/* Serial Console Configuration */
+#define	CONFIG_5xx_CONS_SCI1
+#undef	CONFIG_5xx_CONS_SCI2
+
+#define CONFIG_BAUDRATE		57600
+
+#define CONFIG_COMMANDS		(CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | 		\
+				 CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ASKENV |   		\
+				 CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_ENV | CFG_CMD_RUN |	\
+				 CFG_CMD_IMI)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#if 0
+#define CONFIG_BOOTDELAY	-1		/* autoboot disabled			*/
+#else
+#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds		*/
+#endif
+#define CONFIG_BOOTCOMMAND	"go 02034004" 	/* autoboot command			*/
+
+#define CONFIG_BOOTARGS		""		/* Assuming OS Image in 4 flash sector at offset 4004 */
+
+#define CONFIG_WATCHDOG				/* turn on platform specific watchdog 	*/
+
+#define CONFIG_STATUS_LED	1		/* Enable status led */ 
+
+#define CONFIG_LOADS_ECHO	1		/* Echo on for serial download */
+
+/*
+ * Miscellaneous configurable options 
+ */
+
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16	       /* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x000fa000	/* 1 MB in SRAM			*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address		*/
+
+#define	CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
+
+
+/*
+ * Low Level Configuration Settings
+ */
+
+/*
+ * Internal Memory Mapped (This is not the IMMR content)
+ */
+#define CFG_IMMR		0x01000000				/* Physical start adress of internal memory map */
+
+/*
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR	(CFG_IMMR + 0x003f9800)      		/* Physical start adress of internal MPC555 writable RAM */       
+#define	CFG_INIT_RAM_END	(CFG_IMMR + 0x003fffff)       		/* Physical end adress of internal MPC555 used RAM area	*/
+#define	CFG_GBL_DATA_SIZE	64					/* Size in bytes reserved for initial global data */
+#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define	CFG_INIT_SP_ADDR	0x013fa000				/* Physical start adress of inital stack */
+
+/*
+ * Start addresses for the final memory configuration
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000	/* Monitor won't change memory map 			*/
+#define CFG_FLASH_BASE		0x02000000	/* External flash */
+#define PLD_BASE		0x03000000	/* PLD  */
+#define ANYBUS_BASE		0x03010000	/* Anybus Module */
+
+#define CFG_RESET_ADRESS	0x01000000	/* Adress which causes reset */
+#define	CFG_MONITOR_BASE	CFG_FLASH_BASE	/* TEXT_BASE is defined in the board config.mk file. 	*/
+						/* This adress is given to the linker with -Ttext to 	*/
+						/* locate the text section at this adress. 		*/
+#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor				*/
+#define	CFG_MALLOC_LEN		(64 << 10)	/* Reserve 128 kB for malloc()				*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
+
+
+/*-----------------------------------------------------------------------
+ * FLASH organization 
+ *-----------------------------------------------------------------------
+ * 
+ */
+
+#define CFG_MAX_FLASH_BANKS	1		/* Max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	64		/* Max number of sectors on one chip 	*/
+#define CFG_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms) 	*/
+#define CFG_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms) 	*/
+#define CFG_FLASH_PROTECTION    1		/* Physically section protection on	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_OFFSET		0x00020000		/* Environment starts at this adress 	*/
+#define	CFG_ENV_SIZE		0x00010000		/* Set whole sector as env 		*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control			
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWP)		
+#endif	/* CONFIG_WATCHDOG */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF00
+#define CFG_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
+			 SCCR_COM00   | SCCR_DFNL000 | SCCR_DFNH000)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration
+ *-----------------------------------------------------------------------
+ * Data show cycle
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00)		/* Disable data show cycle 	*/
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register
+ *-----------------------------------------------------------------------
+ * Set all bits to 40 Mhz
+ * 
+ */
+#define CFG_OSC_CLK   	((uint)4000000) 	/* Oscillator clock is 4MHz 	*/
+#define CFG_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
+	
+
+/*-----------------------------------------------------------------------
+ * UMCR - UIMB Module Configuration Register
+ *-----------------------------------------------------------------------
+ * 
+ */
+#define CFG_UMCR	(UMCR_FSPEED) 		/* IMB clock same as U-bus 	*/
+
+/*-----------------------------------------------------------------------
+ * ICTRL - I-Bus Support Control Register
+ */
+#define CFG_ICTRL	(ICTRL_ISCT_SER_7) 	/* Take out of serialized mode 	*/ 
+
+/*-----------------------------------------------------------------------
+ * USIU - Memory Controller Register
+ *----------------------------------------------------------------------- 
+ */
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16)		
+#define CFG_OR0_PRELIM		(OR_ADDR_MK_FF | OR_SCY_3)
+#define CFG_BR1_PRELIM		(ANYBUS_BASE)
+#define CFG_OR1_PRELIM		(OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
+#define CFG_BR2_PRELIM		(CFG_SDRAM_BASE | BR_V | BR_PS_32)
+#define CFG_OR2_PRELIM		(OR_ADDR_MK_FF)
+#define CFG_BR3_PRELIM		(PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
+#define CFG_OR3_PRELIM		(OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
+			 	 OR_ACS_10 | OR_ETHR | OR_CSNT)
+
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* We don't realign the flash	*/
+
+/*-----------------------------------------------------------------------
+ * DER - Timer Decrementer 
+ *-----------------------------------------------------------------------
+ * Initialise to zero
+ */
+#define CFG_DER			0x00000000
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01			/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02			/* Software reboot			*/
+
+#endif	/* __CONFIG_H */