i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

1 files changed, 234 insertions, 183 deletions

diff --git a/include/asm-i386/ic/sc520.h b/include/asm-i386/ic/sc520.h
index bf3951665..57c990442 100644
--- a/include/asm-i386/ic/sc520.h
+++ b/include/asm-i386/ic/sc520.h
@@ -24,179 +24,243 @@
 #ifndef _ASM_IC_SC520_H_
 #define _ASM_IC_SC520_H_ 1
 
-/* Memory mapped configuration registers, MMCR */
-#define SC520_REVID		0x0000	/* ElanSC520 Microcontroller Revision ID Register */
-#define SC520_CPUCTL		0x0002	/* Am5x86 CPU Control Register */
-#define SC520_DRCCTL		0x0010	/* SDRAM Control Register */
-#define SC520_DRCTMCTL		0x0012	/* SDRAM Timing Control Register */
-#define SC520_DRCCFG		0x0014	/* SDRAM Bank Configuration Register*/
-#define SC520_DRCBENDADR	0x0018	/* SDRAM Bank 0-3 Ending Address Register*/
-#define SC520_ECCCTL		0x0020	/* ECC Control Register */
-#define SC520_ECCSTA		0x0021	/* ECC Status Register */
-#define SC520_ECCCKBPOS		0x0022	/* ECC Check Bit Position Register */
-#define SC520_ECCSBADD		0x0024	/* ECC Single-Bit Error Address Register */
+#ifndef __ASSEMBLY__
+
+void init_sc520(void);
+unsigned long init_sc520_dram(void);
+
+/* Memory mapped configuration registers */
+typedef struct sc520_mmcr {
+	u16 revid;	/* ElanSC520 microcontroller revision id */
+	u8  cpuctl;	/* am5x86 CPU control  */
+
+	u8  pad_0x003[0x0d];
+
+	u8  drcctl;		/* SDRAM control */
+	u8  pad_0x011[0x01];
+	u8  drctmctl;		/* SDRAM timing control */
+	u8  pad_0x013[0x01];
+	u16 drccfg;		/* SDRAM bank configuration*/
+	u8  pad_0x016[0x02];
+	u32 drcbendadr;		/* SDRAM bank 0-3 ending address*/
+	u8  pad_0x01c[0x04];
+	u8  eccctl;		/* ECC control */
+	u8  eccsta;		/* ECC status */
+	u8  eccckbpos;		/* ECC check bit position */
+	u8  ecccktest;		/* ECC Check Code Test */
+	u32 eccsbadd;		/* ECC single-bit error address */
+	u32 eccmbadd;		/* ECC multi-bit error address */
+
+	u8  pad_0x02c[0x14];
+
+	u8  dbctl;		/* SDRAM buffer control */
+
+	u8  pad_0x041[0x0f];
+
+	u16 bootcsctl;		/* /BOOTCS control */
+	u8  pad_0x052[0x02];
+	u16 romcs1ctl;		/* /ROMCS1 control */
+	u16 romcs2ctl;		/* /ROMCS2 control */
+
+	u8  pad_0x058[0x08];
+
+	u16 hbctl;		/* host bridge control */
+	u16 hbtgtirqctl;	/* host bridge target interrupt control */
+	u16 hbtgtirqsta;	/* host bridge target interrupt status */
+	u16 hbmstirqctl;	/* host bridge target interrupt control */
+	u16 hbmstirqsta;	/* host bridge master interrupt status */
+	u8  pad_0x06a[0x02];
+	u32 mstintadd;		/* host bridge master interrupt address */
+
+	u8  sysarbctl;		/* system arbiter control */
+	u8  pciarbsta;		/* PCI bus arbiter status */
+	u16 sysarbmenb;		/* system arbiter master enable */
+	u32 arbprictl;		/* arbiter priority control */
+
+	u8  pad_0x078[0x08];
+
+	u8  adddecctl;		/* address decode control */
+	u8  pad_0x081[0x01];
+	u16 wpvsta;		/* write-protect violation status */
+	u8  pad_0x084[0x04];
+	u32 par[16];		/* programmable address regions */
+
+	u8  pad_0x0c8[0x0b38];
+
+	u8  gpecho;		/* GP echo mode */
+	u8  gpcsdw;		/* GP chip select data width */
+	u16 gpcsqual;		/* GP chip select qualification */
+	u8  pad_0xc04[0x4];
+	u8  gpcsrt;		/* GP chip select recovery time */
+	u8  gpcspw;		/* GP chip select pulse width */
+	u8  gpcsoff;		/* GP chip select offset */
+	u8  gprdw;		/* GP read pulse width */
+	u8  gprdoff;		/* GP read offset */
+	u8  gpwrw;		/* GP write pulse width */
+	u8  gpwroff;		/* GP write offset */
+	u8  gpalew;		/* GP ale pulse width */
+	u8  gpaleoff;		/* GP ale offset */
+
+	u8  pad_0xc11[0x0f];
+
+	u16 piopfs15_0;		/* PIO15-PIO0 pin function select */
+	u16 piopfs31_16;	/* PIO31-PIO16 pin function select */
+	u8  cspfs;		/* chip select pin function select */
+	u8  pad_0xc25[0x01];
+	u8  clksel;		/* clock select */
+	u8  pad_0xc27[0x01];
+	u16 dsctl;		/* drive strength control */
+	u16 piodir15_0;		/* PIO15-PIO0 direction */
+	u16 piodir31_16;	/* PIO31-PIO16 direction */
+	u8  pad_0xc2e[0x02];
+	u16 piodata15_0	;	/* PIO15-PIO0 data */
+	u16 piodata31_16;	/* PIO31-PIO16 data */
+	u16 pioset15_0;		/* PIO15-PIO0 set */
+	u16 pioset31_16;	/* PIO31-PIO16 set */
+	u16 pioclr15_0;		/* PIO15-PIO0 clear */
+	u16 pioclr31_16;	/* PIO31-PIO16 clear */
+
+	u8  pad_0xc3c[0x24];
+
+	u16 swtmrmilli;		/* software timer millisecond count */
+	u16 swtmrmicro;		/* software timer microsecond count */
+	u8  swtmrcfg;		/* software timer configuration */
+
+	u8  pad_0xc65[0x0b];
+
+	u8  gptmrsta;		/* GP timers status register */
+	u8  pad_0xc71;
+	u16 gptmr0ctl;		/* GP timer 0 mode/control */
+	u16 gptmr0cnt;		/* GP timer 0 count */
+	u16 gptmr0maxcmpa;	/* GP timer 0 maxcount compare A */
+	u16 gptmr0maxcmpb;	/* GP timer 0 maxcount compare B */
+	u16 gptmr1ctl;		/* GP timer 1 mode/control */
+	u16 gptmr1cnt;		/* GP timer 1 count */
+	u16 gptmr1maxcmpa;	/* GP timer 1 maxcount compare A */
+	u16 gptmr1maxcmpb;	/* GP timer 1 maxcount compare B*/
+	u16 gptmr2ctl;		/* GP timer 2 mode/control */
+	u16 gptmr2cnt;		/* GP timer 2 count */
+	u8  pad_0xc86[0x08];
+	u16 gptmr2maxcmpa;	/* GP timer 2 maxcount compare A */
+
+	u8  pad_0xc90[0x20];
+
+	u16 wdtmrctl;		/* watchdog timer control */
+	u16 wdtmrcntl;		/* watchdog timer count low */
+	u16 wdtmrcnth;		/* watchdog timer count high */
+
+	u8  pad_0xcb6[0x0a];
+
+	u8  uart1ctl;		/* UART 1 general control */
+	u8  uart1sta;		/* UART 1 general status */
+	u8  uart1fcrshad;	/* UART 1 FIFO control shadow */
+	u8  pad_0xcc3[0x01];
+	u8  uart2ctl;		/* UART 2 general control */
+	u8  uart2sta;		/* UART 2 general status */
+	u8  uart2fcrshad;	/* UART 2 FIFO control shadow */
+
+	u8  pad_0xcc7[0x09];
+
+	u8  ssictl;		/* SSI control */
+	u8  ssixmit;		/* SSI transmit */
+	u8  ssicmd;		/* SSI command */
+	u8  ssista;		/* SSI status */
+	u8  ssircv;		/* SSI receive */
+
+	u8  pad_0xcd5[0x2b];
+
+	u8  picicr;		/* interrupt control */
+	u8  pad_0xd01[0x01];
+	u8  pic_mode[3];	/* PIC interrupt mode */
+	u8  pad_0xd05[0x03];
+	u16 swint16_1;		/* software interrupt 16-1 control */
+	u8  swint22_17;		/* software interrupt 22-17/NMI control */
+	u8  pad_0xd0b[0x05];
+	u16 intpinpol;		/* interrupt pin polarity */
+	u8  pad_0xd12[0x02];
+	u16 pcihostmap;		/* PCI host bridge interrupt mapping */
+	u8  pad_0xd16[0x02];
+	u16 eccmap;		/* ECC interrupt mapping */
+	u8  gp_tmr_int_map[3];	/* GP timer interrupt mapping */
+	u8  pad_0xd1d[0x03];
+	u8  pit_int_map[3];	/* PIT interrupt mapping */
+	u8  pad_0xd23[0x05];
+	u8  uart_int_map[2];	/* UART interrupt mapping */
+	u8  pad_0xd2a[0x06];
+	u8  pci_int_map[4];	/* PCI interrupt mapping (A through D)*/
+	u8  pad_0xd34[0x0c];
+	u8  dmabcintmap;	/* DMA buffer chaining interrupt mapping */
+	u8  ssimap;		/* SSI interrupt mapping register */
+	u8  wdtmap;		/* watchdog timer interrupt mapping */
+	u8  rtcmap;		/* RTC interrupt mapping register */
+	u8  wpvmap;		/* write-protect interrupt mapping */
+	u8  icemap;		/* AMDebug JTAG Rx/Tx interrupt mapping */
+	u8  ferrmap;		/* floating point error interrupt mapping */
+	u8  pad_0xd47[0x09];
+	u8  gp_int_map[11];	/* GP IRQ interrupt mapping */
+
+	u8  pad_0xd5b[0x15];
+
+	u8  sysinfo;		/* system board information */
+	u8  pad_0xd71[0x01];
+	u8  rescfg;		/* reset configuration */
+	u8  pad_0xd73[0x01];
+	u8  ressta;		/* reset status */
+
+	u8  pad_0xd75[0x0b];
+
+	u8  gpdmactl;		/* GP-DMA Control */
+	u8  gpdmammio;		/* GP-DMA memory-mapped I/O */
+	u16 gpdmaextchmapa;	/* GP-DMA resource channel map a */
+	u16 gpdmaextchmapb;	/* GP-DMA resource channel map b */
+	u8  gp_dma_ext_pg_0;	/* GP-DMA channel extended page 0 */
+	u8  gp_dma_ext_pg_1;	/* GP-DMA channel extended page 0 */
+	u8  gp_dma_ext_pg_2;	/* GP-DMA channel extended page 0 */
+	u8  gp_dma_ext_pg_3;	/* GP-DMA channel extended page 0 */
+	u8  gp_dma_ext_pg_5;	/* GP-DMA channel extended page 0 */
+	u8  gp_dma_ext_pg_6;	/* GP-DMA channel extended page 0 */
+	u8  gp_dma_ext_pg_7;	/* GP-DMA channel extended page 0 */
+	u8  pad_0xd8d[0x03];
+	u8  gpdmaexttc3;	/* GP-DMA channel 3 extender transfer count */
+	u8  gpdmaexttc5;	/* GP-DMA channel 5 extender transfer count */
+	u8  gpdmaexttc6;	/* GP-DMA channel 6 extender transfer count */
+	u8  gpdmaexttc7;	/* GP-DMA channel 7 extender transfer count */
+	u8  pad_0xd94[0x4];
+	u8  gpdmabcctl;		/* buffer chaining control */
+	u8  gpdmabcsta;		/* buffer chaining status */
+	u8  gpdmabsintenb;	/* buffer chaining interrupt enable */
+	u8  gpdmabcval;		/* buffer chaining valid */
+	u8  pad_0xd9c[0x04];
+	u16 gpdmanxtaddl3;	/* GP-DMA channel 3 next address low */
+	u16 gpdmanxtaddh3;	/* GP-DMA channel 3 next address high */
+	u16 gpdmanxtaddl5;	/* GP-DMA channel 5 next address low */
+	u16 gpdmanxtaddh5;	/* GP-DMA channel 5 next address high */
+	u16 gpdmanxtaddl6;	/* GP-DMA channel 6 next address low */
+	u16 gpdmanxtaddh6;	/* GP-DMA channel 6 next address high */
+	u16 gpdmanxtaddl7;	/* GP-DMA channel 7 next address low */
+	u16 gpdmanxtaddh7;	/* GP-DMA channel 7 next address high */
+	u16 gpdmanxttcl3;	/* GP-DMA channel 3 next transfer count low */
+	u16 gpdmanxttch3;	/* GP-DMA channel 3 next transfer count high */
+	u16 gpdmanxttcl5;	/* GP-DMA channel 5 next transfer count low */
+	u16 gpdmanxttch5;	/* GP-DMA channel 5 next transfer count high */
+	u16 gpdmanxttcl6;	/* GP-DMA channel 6 next transfer count low */
+	u16 gpdmanxttch6;	/* GP-DMA channel 6 next transfer count high */
+	u16 gpdmanxttcl7;	/* GP-DMA channel 7 next transfer count low */
+	u16 gpdmanxttch7;	/* GP-DMA channel 7 next transfer count high */
+
+	u8  pad_0xdc0[0x0240];
+} sc520_mmcr_t;
+
+extern volatile sc520_mmcr_t *sc520_mmcr;
+
+#endif
+
+/* MMCR Offsets (required for assembler code */
 #define SC520_DBCTL		0x0040	/* SDRAM Buffer Control Register */
-#define SC520_BOOTCSCTL		0x0050	/* /BOOTCS Control Register */
-#define SC520_ROMCS1CTL		0x0054	/* /ROMCS1 Control Register */
-#define SC520_ROMCS2CTL		0x0056	/* /ROMCS2 Control Register */
-#define SC520_HBCTL		0x0060	/* Host Bridge Control Register */
-#define SC520_HBTGTIRQCTL	0x0062	/* Host Bridge Target Interrupt Control Register */
-#define SC520_HBTGTIRQSTA	0x0064	/* Host Bridge Target Interrupt Status Register */
-#define SC520_HBMSTIRQCTL	0x0066	/* Host Bridge Target Interrupt Control Register */
-#define SC520_HBMSTIRQSTA	0x0068	/* Host Bridge Master Interrupt Status Register */
-#define SC520_MSTINTADD		0x006c	/* Host Bridge Master Interrupt Address Register */
-#define SC520_SYSARBCTL		0x0070	/* System Arbiter Control Register */
-#define SC520_PCIARBSTA		0x0071	/* PCI Bus Arbiter Status Register */
-#define SC520_SYSARBMENB	0x0072	/* System Arbiter Master Enable Register */
-#define SC520_ARBPRICTL		0x0074	/* Arbiter Priority Control Register */
-#define SC520_ADDDECCTL		0x0080	/* Address Decode Control Register */
-#define SC520_WPVSTA		0x0082	/* Write-Protect Violation Status Register */
-#define SC520_PAR0		0x0088	/* Programmable Address Region 0 Register */
-#define SC520_PAR1		0x008c	/* Programmable Address Region 1 Register */
-#define SC520_PAR2		0x0090	/* Programmable Address Region 2 Register */
-#define SC520_PAR3		0x0094	/* Programmable Address Region 3 Register */
-#define SC520_PAR4		0x0098	/* Programmable Address Region 4 Register */
-#define SC520_PAR5		0x009c	/* Programmable Address Region 5 Register */
-#define SC520_PAR6		0x00a0	/* Programmable Address Region 6 Register */
-#define SC520_PAR7		0x00a4	/* Programmable Address Region 7 Register */
-#define SC520_PAR8		0x00a8	/* Programmable Address Region 8 Register */
-#define SC520_PAR9		0x00ac	/* Programmable Address Region 9 Register */
-#define SC520_PAR10		0x00b0	/* Programmable Address Region 10 Register */
-#define SC520_PAR11		0x00b4	/* Programmable Address Region 11 Register */
-#define SC520_PAR12		0x00b8	/* Programmable Address Region 12 Register */
-#define SC520_PAR13		0x00bc	/* Programmable Address Region 13 Register */
 #define SC520_PAR14		0x00c0	/* Programmable Address Region 14 Register */
 #define SC520_PAR15		0x00c4	/* Programmable Address Region 15 Register */
-#define SC520_GPECHO		0x0c00	/* GP Echo Mode Register */
-#define SC520_GPCSDW		0x0c01	/* GP Chip Select Data Width Register */
-#define SC520_GPCSQUAL		0x0c02	/* GP Chip Select Qualification Register */
-#define SC520_GPCSRT		0x0c08	/* GP Chip Select Recovery Time Register */
-#define SC520_GPCSPW		0x0c09	/* GP Chip Select Pulse Width Register */
-#define SC520_GPCSOFF		0x0c0a	/* GP Chip Select Offset Register */
-#define SC520_GPRDW		0x0c0b	/* GP Read Pulse Width Register */
-#define SC520_GPRDOFF		0x0c0c	/* GP Read Offset Register */
-#define SC520_GPWRW		0x0c0d	/* GP Write Pulse Width Register */
-#define SC520_GPWROFF		0x0c0e	/* GP Write Offset Register */
-#define SC520_GPALEW		0x0c0f	/* GP ALE Pulse Width Register */
-#define SC520_GPALEOFF		0x0c10	/* GP ALE Offset Register */
-#define SC520_PIOPFS15_0	0x0c20	/* PIO15-PIO0 Pin Function Select */
-#define SC520_PIOPFS31_16	0x0c22	/* PIO31-PIO16 Pin Function Select */
-#define SC520_CSPFS		0x0c24	/* Chip Select Pin Function Select */
-#define SC520_CLKSEL		0x0c26	/* Clock Select */
-#define SC520_DSCTL		0x0c28	/* Drive Strength Control */
-#define SC520_PIODIR15_0	0x0c2a	/* PIO15-PIO0 Direction */
-#define SC520_PIODIR31_16	0x0c2c	/* PIO31-PIO16 Direction */
-#define SC520_PIODATA15_0	0x0c30	/* PIO15-PIO0 Data */
-#define SC520_PIODATA31_16	0x0c32	/* PIO31-PIO16 Data */
-#define SC520_PIOSET15_0	0x0c34	/* PIO15-PIO0 Set */
-#define SC520_PIOSET31_16	0x0c36	/* PIO31-PIO16 Set */
-#define SC520_PIOCLR15_0	0x0c38	/* PIO15-PIO0 Clear */
-#define SC520_PIOCLR31_16	0x0c3a	/* PIO31-PIO16 Clear */
-#define SC520_SWTMRMILLI	0x0c60	/* Software Timer Millisecond Count */
-#define SC520_SWTMRMICRO	0x0c62	/* Software Timer Microsecond Count */
-#define SC520_SWTMRCFG		0x0c64	/* Software Timer Configuration */
-#define SC520_GPTMRSTA		0x0c70	/* GP Timers Status Register */
-#define SC520_GPTMR0CTL		0x0c72	/* GP Timer 0 Mode/Control Register */
-#define SC520_GPTMR0CNT		0x0c74	/* GP Timer 0 Count Register */
-#define SC520_GPTMR0MAXCMPA	0x0c76	/* GP Timer 0 Maxcount Compare A Register */
-#define SC520_GPTMR0MAXCMPB	0x0c78	/* GP Timer 0 Maxcount Compare B Register */
-#define SC520_GPTMR1CTL		0x0c7a	/* GP Timer 1 Mode/Control Register */
-#define SC520_GPTMR1CNT		0x0c7c	/* GP Timer 1 Count Register */
-#define SC520_GPTMR1MAXCMPA	0x0c7e	/* GP Timer 1 Maxcount Compare Register A */
-#define SC520_GPTMR1MAXCMPB	0x0c80	/* GP Timer 1 Maxcount Compare B Register */
-#define SC520_GPTMR2CTL		0x0c82	/* GP Timer 2 Mode/Control Register */
-#define SC520_GPTMR2CNT		0x0c84	/* GP Timer 2 Count Register */
-#define SC520_GPTMR2MAXCMPA	0x0c8e	/* GP Timer 2 Maxcount Compare A Register */
-#define SC520_WDTMRCTL		0x0cb0	/* Watchdog Timer Control Register */
-#define SC520_WDTMRCNTL		0x0cb2	/* Watchdog Timer Count Low Register */
-#define SC520_WDTMRCNTH		0x0cb4	/* Watchdog Timer Count High Register */
-#define SC520_UART1CTL		0x0cc0	/* UART 1 General Control Register */
-#define SC520_UART1STA		0x0cc1	/* UART 1 General Status Register */
-#define SC520_UART1FCRSHAD	0x0cc2	/* UART 1 FIFO Control Shadow Register */
-#define SC520_UART2CTL		0x0cc4	/* UART 2 General Control Register */
-#define SC520_UART2STA		0x0cc5	/* UART 2 General Status Register */
-#define SC520_UART2FCRSHAD	0x0cc6	/* UART 2 FIFO Control Shadow Register */
-#define SC520_SSICTL		0x0cd0	/* SSI Control */
-#define SC520_SSIXMIT		0x0cd1	/* SSI Transmit */
-#define SC520_SSICMD		0x0cd2	/* SSI Command */
-#define SC520_SSISTA		0x0cd3	/* SSI Status */
-#define SC520_SSIRCV		0x0cd4	/* SSI Receive */
-#define SC520_PICICR		0x0d00	/* Interrupt Control Register */
-#define SC520_MPICMODE		0x0d02	/* Master PIC Interrupt Mode Register */
-#define SC520_SL1PICMODE	0x0d03	/* Slave 1 PIC Interrupt Mode Register */
-#define SC520_SL2PICMODE	0x0d04	/* Slave 2 PIC Interrupt Mode Register */
-#define SC520_SWINT16_1		0x0d08	/* Software Interrupt 16-1 Control Register */
-#define SC520_SWINT22_17	0x0d0a	/* Software Interrupt 22-17/NMI Control Register */
-#define SC520_INTPINPOL		0x0d10	/* Interrupt Pin Polarity Register */
-#define SC520_PCIHOSTMAP	0x0d14	/* PCI Host Bridge Interrupt Mappin Register */
-#define SC520_ECCMAP		0x0d18	/* ECC Interrupt Mapping Register */
-#define SC520_GPTMR0MAP		0x0d1a	/* GP Timer 0 Interrupt Mapping Register */
-#define SC520_GPTMR1MAP		0x0d1b	/* GP Timer 1 Interrupt Mapping Register */
-#define SC520_GPTMR2MAP		0x0d1c	/* GP Timer 2 Interrupt Mapping Register */
-#define SC520_PIT0MAP		0x0d20	/* PIT0 Interrupt Mapping Register */
-#define SC520_PIT1MAP		0x0d21	/* PIT1 Interrupt Mapping Register */
-#define SC520_PIT2MAP		0x0d22	/* PIT2 Interrupt Mapping Register */
-#define SC520_UART1MAP		0x0d28	/* UART 1 Interrupt Mapping Register */
-#define SC520_UART2MAP		0x0d29	/* UART 2 Interrupt Mapping Register */
-#define SC520_PCIINTAMAP	0x0d30	/* PCI Interrupt A Mapping Register */
-#define SC520_PCIINTBMAP	0x0d31	/* PCI Interrupt B Mapping Register */
-#define SC520_PCIINTCMAP	0x0d32	/* PCI Interrupt C Mapping Register */
-#define SC520_PCIINTDMAP	0x0d33	/* PCI Interrupt D Mapping Register */
-#define SC520_DMABCINTMAP	0x0d40	/* DMA Buffer Chaining Interrupt Mapping Register */
-#define SC520_SSIMAP		0x0d41	/* SSI Interrupt Mapping Register */
-#define SC520_WDTMAP		0x0d42	/* Watchdog Timer Interrupt Mapping Register */
-#define SC520_RTCMAP		0x0d43	/* RTC Interrupt Mapping Register */
-#define SC520_WPVMAP		0x0d44	/* Write-Protect Interrupt Mapping Register */
-#define SC520_ICEMAP		0x0d45	/* AMDebug JTAG RX/TX Interrupt Mapping Register */
-#define SC520_FERRMAP		0x0d46	/* Floating Point Error Interrupt Mapping Register */
-#define SC520_GP0IMAP		0x0d50	/* GPIRQ0 Interrupt Mapping Register */
-#define SC520_GP1IMAP		0x0d51	/* GPIRQ1 Interrupt Mapping Register */
-#define SC520_GP2IMAP		0x0d52	/* GPIRQ2 Interrupt Mapping Register */
-#define SC520_GP3IMAP		0x0d53	/* GPIRQ3 Interrupt Mapping Register */
-#define SC520_GP4IMAP		0x0d54	/* GPIRQ4 Interrupt Mapping Register */
-#define SC520_GP5IMAP		0x0d55	/* GPIRQ5 Interrupt Mapping Register */
-#define SC520_GP6IMAP		0x0d56	/* GPIRQ6 Interrupt Mapping Register */
-#define SC520_GP7IMAP		0x0d57	/* GPIRQ7 Interrupt Mapping Register */
-#define SC520_GP8IMAP		0x0d58	/* GPIRQ8 Interrupt Mapping Register */
-#define SC520_GP9IMAP		0x0d59	/* GPIRQ9 Interrupt Mapping Register */
-#define SC520_GP10IMAP		0x0d5a	/* GPIRQ10 Interrupt Mapping Register */
-#define SC520_SYSINFO		0x0d70	/* System Board Information Register */
-#define SC520_RESCFG		0x0d72	/* Reset Configuration Register */
-#define SC520_RESSTA		0x0d74	/* Reset Status Register */
-#define SC520_GPDMAMMIO		0x0d81	/* GP-DMA Memory-Mapped I/O Register */
-#define SC520_GPDMAEXTCHMAPA	0x0d82	/* GP-DMA Resource Channel Map A */
-#define SC520_GPDMAEXTCHMAPB	0x0d84	/* GP-DMA Resource Channel Map B */
-#define SC520_GPDMAEXTPG0	0x0d86	/* GP-DMA Channel 0 Extended Page */
-#define SC520_GPDMAEXTPG1	0x0d87	/* GP-DMA Channel 1 Extended Page */
-#define SC520_GPDMAEXTPG2	0x0d88	/* GP-DMA Channel 2 Extended Page */
-#define SC520_GPDMAEXTPG3	0x0d89	/* GP-DMA Channel 3 Extended Page */
-#define SC520_GPDMAEXTPG5	0x0d8a	/* GP-DMA Channel 5 Extended Page */
-#define SC520_GPDMAEXTPG6	0x0d8b	/* GP-DMA Channel 6 Extended Page */
-#define SC520_GPDMAEXTPG7	0x0d8c	/* GP-DMA Channel 7 Extended Page */
-#define SC520_GPDMAEXTTC3	0x0d90	/* GP-DMA Channel 3 Extender Transfer count */
-#define SC520_GPDMAEXTTC5	0x0d91	/* GP-DMA Channel 5 Extender Transfer count */
-#define SC520_GPDMAEXTTC6	0x0d92	/* GP-DMA Channel 6 Extender Transfer count */
-#define SC520_GPDMAEXTTC7	0x0d93	/* GP-DMA Channel 7 Extender Transfer count */
-#define SC520_GPDMABCCTL	0x0d98	/* Buffer Chaining Control */
-#define SC520_GPDMABCSTA	0x0d99	/* Buffer Chaining Status */
-#define SC520_GPDMABSINTENB	0x0d9a	/* Buffer Chaining Interrupt Enable */
-#define SC520_GPDMABCVAL	0x0d9b	/* Buffer Chaining Valid */
-#define SC520_GPDMANXTADDL3	0x0da0	/* GP-DMA Channel 3 Next Address Low */
-#define SC520_GPDMANXTADDH3	0x0da2	/* GP-DMA Channel 3 Next Address High */
-#define SC520_GPDMANXTADDL5	0x0da4	/* GP-DMA Channel 5 Next Address Low */
-#define SC520_GPDMANXTADDH5	0x0da6	/* GP-DMA Channel 5 Next Address High */
-#define SC520_GPDMANXTADDL6	0x0da8	/* GP-DMA Channel 6 Next Address Low */
-#define SC520_GPDMANXTADDH6	0x0daa	/* GP-DMA Channel 6 Next Address High */
-#define SC520_GPDMANXTADDL7	0x0dac	/* GP-DMA Channel 7 Next Address Low */
-#define SC520_GPDMANXTADDH7	0x0dae	/* GP-DMA Channel 7 Next Address High */
-#define SC520_GPDMANXTTCL3	0x0db0	/* GP-DMA Channel 3 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH3	0x0db2	/* GP-DMA Channel 3 Next Transfer Count High */
-#define SC520_GPDMANXTTCL5	0x0db4	/* GP-DMA Channel 5 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH5	0x0db6	/* GP-DMA Channel 5 Next Transfer Count High */
-#define SC520_GPDMANXTTCL6	0x0db8	/* GP-DMA Channel 6 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH6	0x0dba	/* GP-DMA Channel 6 Next Transfer Count High */
-#define SC520_GPDMANXTTCL7	0x0dbc	/* GP-DMA Channel 7 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH7	0x0dbe	/* GP-DMA Channel 7 Next Transfer Count High */
+#define SC520_SWTMRMILLI	0x0c60  /* Software Timer Millisecond Count */
+#define SC520_SWTMRMICRO	0x0c62  /* Software Timer Microsecond Count */
 
 /* MMCR Register bits (not all of them :) ) */
 
@@ -221,7 +285,6 @@
 #define SSISTA_BSY		0x02	/* SSI Busy */
 #define SSISTA_TC_INT		0x01	/* SSI Transaction Complete Interrupt */
 
-
 /* BITS for SC520_ADDDECCTL: */
 #define WPV_INT_ENB		0x80	/* Write-Protect Violation Interrupt Enable */
 #define IO_HOLE_DEST_PCI	0x10	/* I/O Hole Access Destination */
@@ -233,7 +296,6 @@
 #define SC520_REG_ADDR		0x00000cf8
 #define SC520_REG_DATA		0x00000cfc
 
-
 #define SC520_ISA_MEM_PHYS	0x00000000
 #define SC520_ISA_MEM_BUS	0x00000000
 #define SC520_ISA_MEM_SIZE	0x01000000
@@ -282,15 +344,4 @@
 #define SC520_IRQ14 9
 #define SC520_IRQ15 10
 
-/* utility functions */
-void write_mmcr_byte(u16 mmcr, u8 data);
-void write_mmcr_word(u16 mmcr, u16 data);
-void write_mmcr_long(u16 mmcr, u32 data);
-u8 read_mmcr_byte(u16 mmcr);
-u16 read_mmcr_word(u16 mmcr);
-u32 read_mmcr_long(u16 mmcr);
-
-void init_sc520(void);
-unsigned long init_sc520_dram(void);
-
 #endif