TQM85xx: NAND support via local bus UPMB

This patch adds support for NAND FLASH on the TQM8548. It is disabled by
default and can be enabled for the TQM8548 modules. It is now based on
the re-written FSL NAND UPM driver. A patch has been posted earlier today
with the subject:

"NAND FSL UPM: driver re-write using the hwcontrol callback"

Note that the R/B pin is not supported by that module requiring to use
the specified maximum delay time.

Note: With NAND support enabled the size of the U-Boot image exceeds
256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
doubling the image size :-(.

Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

1 files changed, 78 insertions, 3 deletions

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 21551304c..b188adf23 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -55,6 +55,14 @@
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
 
 /*
+ * NAND flash support (disabled by default)
+ *
+ * Warning: NAND support will likely increase the U-Boot image size
+ * to more than 256 KB. Please adjust TEXT_BASE if necessary.
+ */
+#undef CONFIG_NAND
+
+/*
  * MPC8540 and MPC8548 don't have CPM module
  */
 #if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548)
@@ -205,8 +213,8 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256kB for Mon */
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserved for malloc	*/
+#define CFG_MONITOR_LEN		(~TEXT_BASE + 1)/* Reserved for Monitor	*/
+#define CFG_MALLOC_LEN		(384 * 1024)	/* Reserved for malloc	*/
 
 /* Serial Port */
 #if defined(CONFIG_TQM8560)
@@ -253,8 +261,8 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* CAN */
-#ifdef CONFIG_CAN_DRIVER
 #define CFG_CAN_BASE		0xE3000000	/* CAN base address     */
+#ifdef CONFIG_CAN_DRIVER
 #define CFG_CAN_OR_AM		0xFFFF8000	/* 32 KiB address mask  */
 #define CFG_OR2_CAN		(CFG_CAN_OR_AM | OR_UPM_BI)
 #define CFG_BR2_CAN		((CFG_CAN_BASE & BR_BA) | \
@@ -301,6 +309,53 @@
 #define CFG_RIO_MEM_SIZE	0x20000000	/* 512M			*/
 #endif /* CONFIG_PCIE1 */
 
+/* NAND FLASH */
+#ifdef CONFIG_NAND
+
+#undef CFG_NAND_LEGACY
+
+#define CONFIG_NAND_FSL_UPM	1
+
+#define	CONFIG_MTD_NAND_ECC_JFFS2	1	/* use JFFS2 ECC	*/
+
+/* address distance between chip selects */
+#define	CFG_NAND_SELECT_DEVICE	1
+#define	CFG_NAND_CS_DIST	0x200
+
+#define CFG_NAND_SIZE		0x8000
+#define CFG_NAND0_BASE		0xE3010000
+#define CFG_NAND1_BASE		(CFG_NAND0_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND2_BASE		(CFG_NAND1_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND3_BASE		(CFG_NAND2_BASE + CFG_NAND_CS_DIST)
+
+#define CFG_MAX_NAND_DEVICE     2	/* Max number of NAND devices	*/
+#define NAND_MAX_CHIPS		1
+
+#if (CFG_MAX_NAND_DEVICE == 1)
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
+#elif (CFG_MAX_NAND_DEVICE == 2)
+#define	CFG_NAND_QUIET_TEST	1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+			     CFG_NAND1_BASE, \
+}
+#elif (CFG_MAX_NAND_DEVICE == 4)
+#define	CFG_NAND_QUIET_TEST	1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+			     CFG_NAND1_BASE, \
+			     CFG_NAND2_BASE, \
+			     CFG_NAND3_BASE, \
+}
+#endif
+
+/* CS3 for NAND Flash */
+#define CFG_BR3_PRELIM		((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \
+				 BR_MS_UPMB | BR_V)
+#define CFG_OR3_PRELIM		(P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI)
+
+#define NAND_BIG_DELAY_US       25	/* max tR for Samsung devices	*/
+
+#endif /* CONFIG_NAND */
+
 /*
  * General PCI
  * Addresses are mapped 1-1.
@@ -486,6 +541,26 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+#ifdef CONFIG_NAND
+/*
+ * Use NAND-FLash as JFFS2 device
+ */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+
+#define	CONFIG_JFFS2_NAND	1
+
+#ifdef CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nand0=TQM85xx-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=TQM85xx-nand:-"
+#else
+#define CONFIG_JFFS2_DEV 	"nand0"	/* NAND device jffs2 lives on	*/
+#define CONFIG_JFFS2_PART_OFFSET 0	/* start of jffs2 partition	*/
+#define CONFIG_JFFS2_PART_SIZE	0x200000 /* size of jffs2 partition	*/
+#endif /* CONFIG_JFFS2_CMDLINE */
+
+#endif /* CONFIG_NAND */
+
 /*
  * Command line configuration.
  */