diff options
| -rw-r--r-- | CHANGELOG | 5 | ||||
| -rw-r--r-- | board/esd/common/cmd_loadpci.c | 123 | ||||
| -rw-r--r-- | board/esd/cpci2dp/Makefile | 2 | ||||
| -rw-r--r-- | board/esd/cpci2dp/cpci2dp.c | 32 | ||||
| -rw-r--r-- | board/esd/pmc405/Makefile | 2 | ||||
| -rw-r--r-- | board/esd/pmc405/pmc405.c | 81 | ||||
| -rw-r--r-- | cpu/ppc4xx/405gp_pci.c | 9 | ||||
| -rw-r--r-- | include/configs/CPCI2DP.h | 10 | ||||
| -rw-r--r-- | include/configs/CPCI405.h | 4 | ||||
| -rw-r--r-- | include/configs/CPCI4052.h | 4 | ||||
| -rw-r--r-- | include/configs/CPCI405AB.h | 4 | ||||
| -rw-r--r-- | include/configs/CPCI405DT.h | 4 | ||||
| -rw-r--r-- | include/configs/PMC405.h | 42 |
13 files changed, 249 insertions, 73 deletions
@@ -2,6 +2,11 @@ Changes since U-Boot 1.1.4: ====================================================================== +* PMC405 and CPCI405: Moved configuration of pci resources + into config file. + PMC405 and CPCI2DP: Added firmware download and booting via pci. + Patch by Matthias Fuchs, 20 Dec 2005 + * Fix 28F256J3A support on PM520 board (without bank-switching only 32 MB can be accessed) diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c new file mode 100644 index 000000000..3478f825c --- /dev/null +++ b/board/esd/common/cmd_loadpci.c @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2005 + * Matthias Fuchs, esd GmbH Germany, matthias.fuchs@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +#if (CONFIG_COMMANDS & CFG_CMD_BSP) + +extern int do_bootm (cmd_tbl_t *, int, int, char *[]); +extern int do_autoscript (cmd_tbl_t *, int, int, char *[]); + +#define ADDRMASK 0xfffff000 + +/* + * Command loadpci: wait for signal from host and boot image. + */ +int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + unsigned int *ptr = 0; + int count = 0; + int count2 = 0; + char addr[16]; + char str[] = "\\|/-"; + char *local_args[2]; + + while(1) { + /* + * Mark sync address + */ + ptr = 0; + memset(ptr, 0, 0x20); + + *ptr = 0xffffffff; + puts("\nWaiting for action from pci host -"); + + /* + * Wait for host to write the start address + */ + while (*ptr == 0xffffffff) { + count++; + if (!(count % 100)) { + count2++; + putc(0x08); /* backspace */ + putc(str[count2 % 4]); + } + + /* Abort if ctrl-c was pressed */ + if (ctrlc()) { + puts("\nAbort\n"); + return 0; + } + + udelay(1000); + } + + printf("\nGot bootcode %08x: ", *ptr); + sprintf(addr, "%08x", *ptr & ADDRMASK); + + switch (*ptr & ~ADDRMASK) { + case 0: + /* + * Boot image via bootm + */ + printf("booting image at addr 0x%s ...\n", addr); + setenv("loadaddr", addr); + + do_bootm (cmdtp, 0, 0, NULL); + break; + + case 1: + /* + * Boot image via autoscr + */ + printf("executing script at addr 0x%s ...\n", addr); + + local_args[0] = addr; + local_args[1] = NULL; + do_autoscript(cmdtp, 0, 1, local_args); + break; + + case 2: + /* + * Call run_cmd + */ + printf("running command at addr 0x%s ...\n", addr); + run_command ((char*)(*ptr & ADDRMASK), 0); + break; + + default: + printf("unhandled boot method\n"); + break; + } + } +} + +U_BOOT_CMD( + loadpci, 1, 1, do_loadpci, + "loadpci - Wait for pci bootcmd and boot it\n", + NULL + ); + +#endif + diff --git a/board/esd/cpci2dp/Makefile b/board/esd/cpci2dp/Makefile index a60495a59..88b0ae343 100644 --- a/board/esd/cpci2dp/Makefile +++ b/board/esd/cpci2dp/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS = $(BOARD).o flash.o ../common/misc.o +OBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index df10c0e6a..2800420e2 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -31,17 +31,15 @@ int board_early_init_f (void) unsigned long cntrl0Reg; /* - * Setup GPIO pins (CS4+CS7 as GPIO) + * Setup GPIO pins */ cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x00900000); + mtdcr(cntrl0, cntrl0Reg | ((CFG_EEPROM_WP | CFG_PB_LED | CFG_SELF_RST | CFG_INTA_FAKE) << 5)); - /* set output pins to high */ - out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP | CFG_PB_LED); - /* INTA# is open drain */ - out32(GPIO0_ODR, CFG_INTA_FAKE); - /* setup for output */ - out32(GPIO0_TCR, CFG_INTA_FAKE | CFG_EEPROM_WP); + /* set output pins to high */ + out32(GPIO0_OR, CFG_EEPROM_WP); + /* setup for output (LED=off) */ + out32(GPIO0_TCR, CFG_EEPROM_WP | CFG_PB_LED); /* * IRQ 0-15 405GP internally generated; active high; level sensitive @@ -130,16 +128,6 @@ long int initdram (int board_type) /* ------------------------------------------------------------------------- */ -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 64 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - #if defined(CFG_EEPROM_WREN) /* Input: <dev_addr> I2C address of EEPROM device to enable. * <state> -1: deliver current state @@ -207,8 +195,8 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", - NULL - ); + eepwren, 2, 0, do_eep_wren, + "eepwren - Enable / disable / query EEPROM write access\n", + NULL + ); #endif /* #if defined(CFG_EEPROM_WREN) */ diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile index 1281be70b..741e4aacd 100644 --- a/board/esd/pmc405/Makefile +++ b/board/esd/pmc405/Makefile @@ -30,7 +30,7 @@ CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -OBJS = $(BOARD).o ../common/misc.o $(CPLD) +OBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD) $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c index 33b5f774d..f9e4d4377 100644 --- a/board/esd/pmc405/pmc405.c +++ b/board/esd/pmc405/pmc405.c @@ -1,6 +1,9 @@ /* * (C) Copyright 2001-2003 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2005 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this * project. @@ -66,16 +69,27 @@ int board_early_init_f (void) mtebc (epcr, 0xa8400000); /* - * Setup GPIO pins (CS6+CS7 as GPIO) + * Setup GPIO pins */ - mtdcr(cntrl0, mfdcr(cntrl0) | 0x00300000); - /* - * Configure GPIO pins + mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_FPGA_INIT | \ + CFG_FPGA_DONE | \ + CFG_XEREADY | \ + CFG_NONMONARCH | \ + CFG_REV1_2) << 5)); + + if (!(in32(GPIO0_IR) & CFG_REV1_2)) { + /* rev 1.2 boards */ + mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_INTA_FAKE | \ + CFG_SELF_RST) << 5)); + } + + out32(GPIO0_OR, 0); + out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA | CFG_XEREADY); /* setup for output */ + + /* - check if rev1_2 is low, then: + * - set/reset CFG_INTA_FAKE/CFG_SELF_RST in TCR to assert INTA# or SELFRST# */ - out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA); /* setup for output */ - out32(GPIO0_OR, 0); /* outputs -> low */ return 0; } @@ -83,11 +97,6 @@ int board_early_init_f (void) /* ------------------------------------------------------------------------- */ -int misc_init_f (void) -{ - return 0; /* dummy implementation */ -} - int misc_init_r (void) { @@ -97,16 +106,30 @@ int misc_init_r (void) gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_XEREADY); /* deassert EREADY# */ return (0); } +ushort pmc405_pci_subsys_deviceid(void) +{ + ulong val; + val = in32(GPIO0_IR); + if (!(val & CFG_REV1_2)) { /* low=rev1.2 */ + if (val & CFG_NONMONARCH) { /* monarch# signal */ + return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH; + } + return CFG_PCI_SUBSYS_DEVICEID_MONARCH; + } + return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH; +} /* * Check Board Identity: */ - int checkboard (void) { + ulong val; + char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); @@ -118,12 +141,18 @@ int checkboard (void) puts(str); } - putc ('\n'); + val = in32(GPIO0_IR); + if (!(val & CFG_REV1_2)) { /* low=rev1.2 */ + puts(" rev1.2 ("); + if (val & CFG_NONMONARCH) { /* monarch# signal */ + puts("non-"); + } + puts("monarch)"); + } else { + puts(" <=rev1.1"); + } - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); + putc ('\n'); return 0; } @@ -145,17 +174,19 @@ long int initdram (int board_type) return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } -/* ------------------------------------------------------------------------- */ -int testdram (void) +/* ------------------------------------------------------------------------- */ +void reset_phy(void) { - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); +#ifdef CONFIG_LXT971_NO_SLEEP - return (0); + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); +#endif } -/* ------------------------------------------------------------------------- */ int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 64431ab13..f6b29e9d6 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -81,6 +81,10 @@ #ifdef CONFIG_PCI +#if defined(CONFIG_PMC405) +ushort pmc405_pci_subsys_deviceid(void); +#endif + /*#define DEBUG*/ /*-----------------------------------------------------------------------------+ @@ -96,13 +100,10 @@ void pci_405gp_init(struct pci_controller *hose) unsigned short temp_short; unsigned long ptmpcila[2] = {CFG_PCI_PTM1PCI, CFG_PCI_PTM2PCI}; #if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405) - unsigned long ptmla[2] = {bd->bi_memstart, bd->bi_flashstart}; - unsigned long ptmms[2] = {~(bd->bi_memsize - 1) | 1, ~(bd->bi_flashsize - 1) | 1}; char *ptmla_str, *ptmms_str; -#else +#endif unsigned long ptmla[2] = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA}; unsigned long ptmms[2] = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS}; -#endif #if defined(CONFIG_PIP405) || defined (CONFIG_MIP405) unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0}; unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0}; diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 756bb8cea..56fd9a6d3 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -143,8 +143,9 @@ #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x040b /* PCI Device ID: CPCI-2DP */ #define CFG_PCI_CLASSCODE 0x0280 /* PCI Class Code: Network/Other*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ + +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs + PB0/1 */ #define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */ @@ -250,14 +251,15 @@ #define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * GPIO definitions */ #define CFG_EEPROM_WP (0x80000000 >> 13) /* GPIO13 */ +#define CFG_SELF_RST (0x80000000 >> 14) /* GPIO14 */ #define CFG_PB_LED (0x80000000 >> 16) /* GPIO16 */ #define CFG_INTA_FAKE (0x80000000 >> 23) /* GPIO23 */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index d49020db7..efc3adaec 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -151,8 +151,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 13dbe80da..1347f2afc 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -178,8 +178,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index aaaafa94f..9d5281509 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -161,8 +161,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 5cd9aba9e..946a0fd19 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -183,8 +183,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 8bcab0b0f..6e0bd7f23 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -53,9 +53,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_BSP | \ @@ -154,15 +160,24 @@ #define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0408 /* PCI Device ID: PMC-405 */ +#define CFG_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID: Non-Monarch */ +#define CFG_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID: Monarch */ +#define CFG_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid() + #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ + +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#if 1 +#define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs */ +#define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */ +#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ +#else /* old mapping */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ #define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - +#endif /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) @@ -259,7 +274,7 @@ #define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */ #define CAN_BA 0xF0000000 /* CAN Base Address */ #define RTC_BA 0xF0000500 /* RTC Base Address */ -#define CF_BA 0xF0100000 /* CompactFlash Base Address */ +#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */ /* Memory Bank 0 (Flash Bank 0) initialization */ #define CFG_EBC_PB0AP 0x92015480 @@ -273,9 +288,11 @@ #define CFG_EBC_PB2AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ #define CFG_EBC_PB2CR CAN_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ -/* Memory Bank 3 (CompactFlash IDE, FPGA internal) initialization */ -#define CFG_EBC_PB3AP 0x010059C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ -#define CFG_EBC_PB3CR CF_BA | 0x1A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */ +/* Memory Bank 3 -> unused */ + +/* Memory Bank 4 (NVRAM) initialization */ +#define CFG_EBC_PB4AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ +#define CFG_EBC_PB4CR NVRAM_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ /*----------------------------------------------------------------------- * FPGA stuff @@ -293,6 +310,15 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ /*----------------------------------------------------------------------- + * GPIOs + */ +#define CFG_NONMONARCH (0x80000000 >> 14) /* GPIO24 */ +#define CFG_XEREADY (0x80000000 >> 15) /* GPIO15 */ +#define CFG_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */ +#define CFG_SELF_RST (0x80000000 >> 21) /* GPIO21 */ +#define CFG_REV1_2 (0x80000000 >> 23) /* GPIO23 */ + +/*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in data cache) */ |