805 files changed, 34315 insertions, 7975 deletions

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 000000000..67fed082c
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,13 @@
+*.orig
+*.a
+*.o
+*.depend
+System.map
+/u-boot
+/u-boot.map
+/u-boot.bin
+/u-boot.srec
+/LOG
+/errlog
+/reloc_off
+
diff --git a/CHANGELOG b/CHANGELOG
index 0068947f7..ef5c7ea98 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,1586 @@
+commit 467bcee11fe26ad422f2de971aa70866079870f2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 15:36:18 2007 +0100
+
+    cfi_flash: Add manufacturer-specific fixups
+
+    Run fixups based on the JEDEC manufacturer ID independent of the
+    command set ID.
+
+    This changes current behaviour: Previously, geometry reversal for AMD
+    chips were done based on the command set ID, while they are now done
+    based on the JEDEC manufacturer and device ID.
+
+    Also add fixup for top-boot Atmel chips. A fixup is needed for
+    AT49BV6416(T) too, but since u-boot currently only reads the low byte
+    of the device ID, there's no way to tell it apart from AT49BV642D,
+    which should not have this fixup. Since AT49BV642D support is
+    necessary to get ATNGW100 board support into mainline, I've commented
+    out the fixup for now.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 15:36:17 2007 +0100
+
+    cfi_flash: Add cmdset-specific init functions
+
+    Move things like reading JEDEC IDs and fixing up geometry reversal
+    into separate functions. The geometry reversal fixup is now performed
+    by altering the qry structure directly, which makes the sector init
+    code slightly cleaner.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e23741f4a6d8047520ef0d4971762749b3587d32
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 15:36:16 2007 +0100
+
+    cfi_flash: Read whole QRY structure in one go
+
+    Read out the whole CFI Standard Query structure after successful cfi
+    identification. This allows subsequent code to access this information
+    directly without having to go through flash_read_uchar() and friends.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Dec 17 11:02:44 2007 +0100
+
+    AVR32: Fix logic inversion in disable_interrupts()
+
+    disable_interrupts() should return nonzero if interrupts were
+    _enabled_ before, not disabled.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit acac475212cbedb17b321a363a1c878e2b47b37f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 16:51:22 2007 +0100
+
+    AVR32: Enable interrupts at bootup
+
+    The timer code depends on the timer interrupt to keep track of the
+    upper 32 bits of the cycle counter. This obviously doesn't work when
+    interrupts are disabled the whole time.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9570bcd87f4db255514f43b6701746c412f8fef0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Nov 15 10:03:45 2007 +0100
+
+    AVR32: Fix wrong pin setup for USART3
+
+    As reported by Gerhard Berghofer:
+
+    in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
+    instead of PB18 and PB19.
+
+    which is obviously correct. There's currently no code that uses
+    USART3, but custom boards may run into problems.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Nov 1 12:44:20 2007 +0100
+
+    README: Remove ATSTK1000 daughterboard list
+
+    As noted by Kim Phillips, these lists tend to become out of date.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c81cbbad21cb0ae983e2e796211202234cdc8be2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Tue Oct 30 14:56:36 2007 +0100
+
+    Add ATSTK100[234] to MAINTAINERS
+
+    Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
+    "mother". Also update the entry for ATSTK1000 to be not only about the
+    AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 64ff2357b1727213803591813dbc779c924bf772
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:02:54 2007 +0100
+
+    AVR32: Add support for the ATSTK1004 board
+
+    ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
+    which is a derivative of AT32AP7000.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 667568db157f374b85abd7e03596ddd1f0b25681
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:02:54 2007 +0100
+
+    AVR32: Add support for the ATSTK1003 board
+
+    ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
+    which is a derivative of AT32AP7000.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5fee84a794a51ec830548cda485a770efb018b92
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:23:33 2007 +0100
+
+    AVR32: Make some AT32AP700x peripherals optional
+
+    Add a chip-features file providing definitions of the form
+
+    AT32AP700x_CHIP_HAS_<peripheral>
+
+    to indicate the availability of the given peripheral on the currently
+    selected chip.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 36f28f8a9605ee5dcfa330482cfc62171261af97
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:09:56 2007 +0100
+
+    AVR32: Rename at32ap7000 -> at32ap700x
+
+    The SoC-specific code for all the AT32AP700x CPUs is practically
+    identical; the only difference is that some chips have less features
+    than others. By doing this rename, we can add support for the AP7000
+    derivatives simply by making some features conditional.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Jun 29 18:22:34 2007 +0200
+
+    atmel_mci: Show SR when block read fails
+
+    Show controller status as well as card status when an error occurs
+    during block read.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 12d30aa79779c2aa7a998bbae4c075f822a53004
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:34 2007 +0100
+
+    cfi_flash: Use map_physmem() and unmap_physmem()
+
+    Use map_physmem() and unmap_physmem() to convert from physical to
+    virtual addresses. This gives the arch a chance to provide an uncached
+    mapping for flash accesses.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d7d6936eb29af7cca330937808312aa5f61454d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:33 2007 +0100
+
+    Introduce map_physmem() and unmap_physmem()
+
+    map_physmem() returns a virtual address which can be used to access a
+    given physical address without involving the cache. unmap_physmem()
+    should be called when the virtual address returned by map_physmem() is
+    no longer needed.
+
+    This patch adds a stub implementation which simply returns the
+    physical address cast to a uchar * for all architectures except AVR32,
+    which converts the physical address to an uncached virtual mapping.
+    unmap_physmem() is a no-op on all architectures, but if any
+    architecture needs to do such mappings through the TLB, this is the
+    hook where those TLB entries can be invalidated.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:32 2007 +0100
+
+    cfi_flash: Introduce read and write accessors
+
+    Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
+    them to access the flash memory. This makes it clearer when the flash
+    is actually being accessed; merely dereferencing a volatile pointer
+    looks just like any other kind of access.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 812711ce6b3a386125dcf0d6a59588e461abbb87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:31 2007 +0100
+
+    Implement __raw_{read,write}[bwl] on all architectures
+
+    This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
+    m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
+    from Linux.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Sat Oct 6 18:55:36 2007 +0200
+
+    cfi_flash: Reorder functions and eliminate extra prototypes
+
+    Reorder the functions in cfi_flash.c so that each function only uses
+    functions that have been defined before it. This allows the static
+    prototype declarations near the top to be eliminated and might allow
+    gcc to do a better job inlining functions.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:29 2007 +0100
+
+    cfi_flash: Make some needlessly global functions static
+
+    Make functions not declared in any header file static.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7e5b9b471518c5652febc68ba62b432193d6abf4
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:28 2007 +0100
+
+    cfi_flash: Break long lines
+
+    This patch tries to keep all lines in the cfi_flash driver below 80
+    columns. There are a few lines left which don't fit this requirement
+    because I couldn't find any trivial way to break them (i.e. it would
+    take some restructuring, which I intend to do in a later patch.)
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Tue Dec 11 13:59:57 2007 +0100
+
+    CFI: synchronize command offsets with Linux CFI driver
+
+    Fixes non-working CFI Flash on the Inka4x0 board.
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Dec 7 12:17:34 2007 -0600
+
+    Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+
+    On the MPC85xx boards that have PCIe enable the PCIe errata fix.
+    (MPC8544DS, MPC8548CDS, MPC8568MDS).
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Dec 7 12:04:30 2007 -0600
+
+    Update Freescale MPC85xx ADS/CDS/MDS board config
+
+    * Enabled CONFIG_CMD_ELF
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d435793229ce29a42797c1edc39f5b34f987f91a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Dec 7 04:59:26 2007 -0600
+
+    Handle Asynchronous DDR clock on 85xx
+
+    The MPC8572 introduces the concept of an asynchronous DDR clock with
+    regards to the platform clock.
+
+    Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
+    mode.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:34:28 2007 -0600
+
+    Update Freescale MPC85xx ADS/CDS/MDS board config
+
+    * Removed some misc environment setup
+    * Enabled CONFIG_CMDLINE_EDITING
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:47:44 2007 -0600
+
+    Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:16:18 2007 -0600
+
+    Move the MPC8540 ADS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 870ceac5b3a3486c109396e005af81ae762b5710
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:14:50 2007 -0600
+
+    Move the MPC8560 ADS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:13:47 2007 -0600
+
+    Move the MPC8568 MDS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a853d56c59b33415304531443633808736acfc6e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 02:18:59 2007 -0600
+
+    Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+
+    We already had defines for LAWAR_TRGT_IF_* that we should use
+    rather than creating new ones.  Also, added some missing defines for
+    PCIE targets.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 04db400892da37b76a585e332a0c137954ad2015
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 02:10:09 2007 -0600
+
+    Stop using immap_t on 85xx
+
+    In the future the offsets to various blocks may not be in same location.
+    Move to using CFG_MPC85xx_*_ADDR as the base of the registers
+    instead of getting it via &immap.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2714223f8e04ab3e4133ff65872eef366d90bfea
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 01:23:09 2007 -0600
+
+    Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c480861bf000156e6a3e932c258db59ff2212dd3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 01:06:19 2007 -0600
+
+    Update MPC8568 MDS to use libfdt
+
+    Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Wed Nov 14 15:52:06 2007 -0500
+
+    Add PCI Express support on MPC8568MDS
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b90d25497625b90ffa3f2911a0895ca237556ff5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 00:11:44 2007 -0600
+
+    Update MPC85xx CDS to use libfdt
+
+    Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 28 22:54:27 2007 -0600
+
+    Update MPC8540 ADS to use libfdt
+
+    Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ce715802f6c50dc78b3405b92f184b1e3710519
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 28 22:40:31 2007 -0600
+
+    Update MPC8560 ADS to use libfdt
+
+    Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 28 00:36:33 2007 -0600
+
+    Stop using immap_t for cpm offset on 85xx
+
+    In the future the offsets to various blocks may not be in same location.
+    Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
+    instead of getting it via &immap->im_cpm.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Nov 27 23:25:02 2007 -0600
+
+    Stop using immap_t for guts offset on 85xx
+
+    In the future the offsets to various blocks may not be in same location.
+    Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
+    instead of getting it via &immap->im_gur.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 50c03c8cf494d91cdec39670d95337c743e16ec9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Nov 27 22:42:34 2007 -0600
+
+    Update MPC8544 DS config
+
+    * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
+    * Removed some misc environment setup
+    * Moved to using fdtfile & fdtaddr as fdt env var names
+    * Enabled CONFIG_CMDLINE_EDITING
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit addce57e2e4c49e77ffb2020a84690713bb18b47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 17:12:24 2007 -0600
+
+    Update MPC8544DS to use libfdt
+
+    Updated the MPC8544DS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 00:15:30 2007 -0600
+
+    Add libfdt based ft_cpu_setup for mpc85xx
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Dec 8 08:25:09 2007 +0100
+
+    CFI: Coding style cleanup
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
+Author: Michael Schwingen <michael@schwingen.org>
+Date:	Fri Dec 7 23:35:02 2007 +0100
+
+    CFI: support JEDEC flash roms in CFI-flash framework
+
+    The following patch adds support for non-CFI flash ROMS, by hooking into the
+    CFI flash code and using most of its code, as recently discussed here in the
+    thread "Mixing CFI and non-CFI flashs".
+
+    Signed-off-by: Michael Schwingen <michael@schwingen.org>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c01b17dd856fa120b2970f50d9598546a4927ec3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date:	Wed Nov 28 21:24:50 2007 -0500
+
+    Conditionally compile fdt_fixup_ethernet()
+
+    Fix compiler warnings: On boards that don't have ethernets defined,
+    don't compile fdt_fixup_ethernet().
+
+commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Nov 27 21:59:46 2007 -0600
+
+    Convert boards that set memory node to use fdt_fixup_memory()
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 17:06:15 2007 -0600
+
+    Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+
+    We use a combination of the serialN alias and CONFIG_CONS_INDEX to
+    determine which serial alias we should set linux,stdout-path to.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 14:57:45 2007 -0600
+
+    Add common memory fixup function
+
+    Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 11:19:12 2007 -0600
+
+    Conditionally compile fdt_support.c
+
+    Modify common/Makefile to conditionally compile fdt_support.c based
+    on CONFIG_OF_LIBFDT.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d88e7ba0980773479e1a64badb293116071b7ef0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 10:41:40 2007 -0600
+
+    Fix build breakage due to libfdt import
+
+    The IDS8247 got lost in the update and need an API update
+    do to rename of functions in libfdt.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date:	Fri Nov 23 19:43:20 2007 -0500
+
+    Add spaces around the = in the fdt print format.
+
+    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Dec 7 01:25:38 2007 +0900
+
+    sh: Moved driver of the SuperH dependence
+
+    The composition of the directory in the drivers/ changed.
+    I moved SuperH serial driver and marubun PCMCIA driver.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Dec 6 10:21:19 2007 +0100
+
+    Release v1.3.1
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Dec 6 10:21:03 2007 +0100
+
+    ADS5121 Board: fix compile problem.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Dec 3 00:15:28 2007 +0100
+
+    Prepare for 1.3.1-rc1
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 260eea5676ca46903a335686cc020b29c4ca46fe
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Thu Nov 29 01:21:54 2007 +0900
+
+    sh: Add SuperH boards maintainer to MAINTAINERS file
+
+    Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Thu Nov 29 00:13:04 2007 +0900
+
+    sh: Add ms7750se support in MAKEALL
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c7144373427a178332bf9754131c8c34c52c200a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 27 09:44:53 2007 +0100
+
+    sh: Add sh3 and sh4 support in MAKEALL
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 130080874a3d28450098481a262c5f7c855e908d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Nov 25 02:51:17 2007 +0900
+
+    sh: Add document for SuperH.
+
+    This document is a summary of information concerning SuperH of U-Boot.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Nov 25 02:39:31 2007 +0900
+
+    sh: Add marubun's pcmcia driver
+
+    Marubun pcmcia is a chip for PCMCIA used with SuperH.
+    Of course, this can be used even by other architectures.
+    When use this driver, came to be able to use CompactFlash
+    and Ethernet.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit febd86b969b975289ed948f1ac0eb9722da41ced
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Nov 25 02:32:13 2007 +0900
+
+    sh: Update SuperH SCIF driver
+
+    - Changed volatile unsigned to vu_.
+    - Changed Makefile for kconfig.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Nov 26 19:18:21 2007 +0100
+
+    Cleanup coding style; update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 25 22:39:25 2007 +0100
+
+    MAKEALL: add missing 512x boards in ppc
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a340c325e668ca7386c2276387681720be9c3757
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 25 18:45:47 2007 +0100
+
+    Makefile : fix tags ctags etags with new drivers organization
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 25 18:45:47 2007 +0100
+
+    Makefile : fix tags ctags etags with new drivers organization
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 59829cc189378c142c13d2aa8d9a897d8bef3961
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 21:26:56 2007 +0100
+
+    drivers/mtd : move mtd drivers to drivers/mtd
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 318c0b90431f2648552e5ade78833f42652ce859
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 21:17:55 2007 +0100
+
+    drivers/misc : move misc drivers to drivers/misc
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 33daf5b7858807cb4ce4158c2c56524671c14c08
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 21:13:59 2007 +0100
+
+    drivers/block : move block drivers to drivers/block
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c698dcaa70275eb8814f665b545547cee013892
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 20:59:50 2007 +0100
+
+    drivers/rtc : move rtc drivers to drivers/rtc
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f868cc5a50757d94f36c312395481cb0f187d9e6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 20:14:44 2007 +0100
+
+    drivers/hwmon : move hardware monitor drviers to drivers/hwmon
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 19:46:45 2007 +0100
+
+    drivers/input : move input drivers to drivers/input
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e4558666293364fc3af1c1d9381ca933fa0f1275
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 19:40:11 2007 +0100
+
+    drivers/usb : move usb drivers to drivers/usb
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 24 19:33:38 2007 +0100
+
+    drivers/serial : move serial drivers to drivers/serial
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Nov 21 21:19:24 2007 +0100
+
+    drivers/net : move net drivers to drivers/net
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 352d259130b349fe9593b8dada641bd78a9659e5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 20 20:41:48 2007 +0100
+
+    drivers/video : move video drivers to drivers/video
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 73646217186aa17afc8e305c5f06f06dd335eaad
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 20 20:33:09 2007 +0100
+
+    drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 20 20:28:09 2007 +0100
+
+    drivers/pci : move pci drivers to drivers/pci
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9162352817579840d7802da6d85872b3ca003c97
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date:	Thu Nov 22 17:23:23 2007 -0500
+
+    Fix fdt printing for updated libfdt
+
+    Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
+
+    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 21 13:30:15 2007 -0600
+
+    Add additional fdt fixup helper functions
+
+    Added the following fdt fixup helpers:
+     * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
+     * do_fixup_by_compat{_u32} - Find matching nodes by compat
+
+    The _u32 variants work the same only the property they are setting
+    is know to be a 32-bit integer instead of a byte buffer.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 21 11:11:03 2007 -0600
+
+    Add fdt_fixup_ethernet helper to set mac addresses
+
+    Added a fixup helper that uses aliases to set mac addresses
+    in the device tree based on the bd_t
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dbaf07ce620aab249e3502b20a986234a6af1d3a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 21 14:07:46 2007 -0600
+
+    Fix warnings from import of libfdt
+
+    cmd_fdt.c: In function fdt_print:
+    cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
+    cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
+    cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
+    cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8d04f02f6224e6983f4812ea4da704950ec8539c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Oct 24 11:04:22 2007 -0500
+
+    Update libfdt from device tree compiler (dtc)
+
+    Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
+    the device tree compiler (dtc) project.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e93becf80d732b64aef81b23e8b6ece02c40533d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Sat Nov 3 19:46:28 2007 -0500
+
+    Move do_fixup* for libfdt into common code
+
+    Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
+    into common/fdt_support.c and renamed:
+
+    do_fixup()	-> do_fixup_by_path()
+    do_fixup_u32()	-> do_fixup_by_path_u32()
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f738b4a75998f42a7408defadc9baac7a31c92db
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 25 16:15:07 2007 -0500
+
+    Make no options to fdt print default to '/'
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Oct 24 10:21:57 2007 -0500
+
+    Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
+
+    Removed:
+	fdt_node_is_compatible
+	fdt_find_node_by_type
+	fdt_find_compatible_node
+
+    To ease merge of newer libfdt as we aren't using them anywhere at this time.
+
+    Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
+    reason.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 98e2867cc85409b919f862e6c16026461ec955df
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Wed Nov 21 09:19:37 2007 -0700
+
+    [BUILD] Remove libraries when updating autoconf.mk
+
+    Fix library problems caused by conditional compilation.  Using
+    autoconf.mk to decide which files to compile has caused a problem when
+    changing configuration from one board to another without clearing out
+    the library (*.a) files.
+
+    It used to be that the linker was always passed the same list of .o
+    files when building the .a files.  However, that is not longer true
+    with conditional compilation.  Now, a different board config will have
+    a different file list passed to the linker.  The problem occurs when
+    a library has already been built and the board config is changed.
+
+    Since the linker will update instead of replace a preexisting library,
+    then if the file list changes to remove some object files the old
+    objects will still exist in the library.
+
+    The solution is to remove all old library files when autoconf.mk is
+    made.
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 21 08:49:50 2007 -0600
+
+    [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
+
+    Modify libfdt/Makefile to conditionally compile the *.c files based
+    on the board config.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4a43719a7738712811d822ca8125427b27a55cdc
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:31 2007 -0600
+
+    [BUILD] conditionally compile common/cmd_*.c in common/Makefile
+
+    Modify common/Makefile to conditionally compile the cmd_*.c files based
+    on the board config.
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:31 2007 -0600
+
+    [BUILD] Generate include/autoconf.mk from board config files
+
+    Use cpp and sed to postprocess config.h and import the defined values
+    into include/autoconf.mk.  autoconf.mk is then included by config.mk to
+    give 'make' access to the board configuration.
+
+    Doing this enables conditional compilation at the Makefile level instead
+    of by wrapping every .c file with #ifdef/#endif wrappers.
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 080c646dbf474a109c3f85718fb01ce042a38c45
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 20 20:14:18 2007 +0100
+
+    drivers/i2c : move i2c drivers to drivers/i2c
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9a337ddc154a10a26f117fd147b009abcdeba75a
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Nov 19 22:20:24 2007 +0100
+
+    Prepare for 1.3.0 release.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f30ad49b16bf998b03c1a5228b6c86369d61c258
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Mon Nov 19 10:02:13 2007 -0500
+
+    Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
+
+    CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit f8c320609366176b31104d9bf5e295232e1c7f1d
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date:	Mon Nov 19 11:14:16 2007 +0900
+
+    [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
+
+    lowlevel_init.S: Assembler messages:
+    lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
+
+    Looking at codes, the `memtest' and `clearmem' are intentional mixed
+    use of `global symbols' and `label' for debugging purpose. To make it
+    build, just disable global-symbols-use for now. As a result `memtest'
+    still remains as unused, but leave it be...
+
+    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Nov 19 12:59:14 2007 +0100
+
+    Fix build problems with mp2usb board
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6bf4c686afca1e86e1c384d59218f914605713bf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 18 18:36:11 2007 +0100
+
+    s3c24x0: Fix usb_ohci.c missing in Makefile
+    and usb_ohci.c warning differ in signedness
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6073f61e078da5ddb521b56256bcc36508589883
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 18 12:55:02 2007 +0100
+
+    pb1x00 board: Fix u16 status declaration when PCMCIA is defined
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Nov 18 17:11:09 2007 +0100
+
+    Fix compiler warnings for ARM systems.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Nov 18 16:36:27 2007 +0100
+
+    Fix compiler warnings for PPC systems. Update CHANGELOG.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 17 11:31:10 2007 +0100
+
+    Fix warning differ in signedness in net/net.c and net/nfs.c
+
+commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Nov 17 20:42:45 2007 +0900
+
+    gth2.c: Fix a warning on gth2 build.
+
+    gth2.c: In function 'misc_init_r':
+    gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2309c130aa4c84b91bd874a41269c923eb61b555
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Nov 17 07:58:25 2007 +0100
+
+    Fix warning differ in signedness in common/cmd_scsi.c
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Nov 17 20:05:26 2007 +0900
+
+    [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
+
+    Current trick to pick up GNU assembler minor version does not work with the
+    latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
+    "(GNU Binutils) ".
+
+      $ sde-as --version |grep "GNU assembler"
+      GNU assembler 2.15.94 mipssde-6.02.02-20050602
+      $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
+      2.15.94
+      $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
+      15
+      $
+
+      $ mips-linux-as --version |grep "GNU assembler"
+      GNU assembler (GNU Binutils) 2.18
+      $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
+      (GNU
+      $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
+      (no output)
+      $
+
+    As a result of above, you'll see many noises with such binutils:
+
+      make -C cpu/mips/
+      /bin/sh: line 0: [: : integer expression expected
+      /bin/sh: line 0: [: : integer expression expected
+      make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
+      mips-linux-gcc  -D__ASSEMBLY__ -g  -Os   -D__KERNEL__ -DTEXT_BASE=0xB0000000  -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
+      /bin/sh: line 0: [: : integer expression expected
+      mips-linux-gcc  -D__ASSEMBLY__ -g  -Os   -D__KERNEL__ -DTEXT_BASE=0xB0000000  -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
+      /bin/sh: line 0: [: : integer expression expected
+      mips-linux-gcc -g  -Os   -D__KERNEL__ -DTEXT_BASE=0xB0000000  -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
+      /bin/sh: line 0: [: : integer expression expected
+
+    This patch simplifies the trick and makes it work with both versions of gas.
+    I also replace an expensive `awk (or gawk)' with `cut'.
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16664f72850846e645616da1c0fa5afcd6d15f15
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Nov 17 20:05:26 2007 +0900
+
+    [MIPS] Remove useless instructions for initializing $gp.
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 03c031d5660ea946c39af6e2e16267da857c609f
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Oct 27 15:27:06 2007 +0900
+
+    [MIPS] MIPS 4K core: Coding style cleanups
+
+    No logical changes.
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Nov 17 20:05:20 2007 +0900
+
+    [MIPS] gth2.c: Fix a warning on gth2 build.
+
+    gth2.c: In function 'misc_init_r':
+    gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 4fbd0741b2b6441da10be93e10267122581b7079
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Oct 27 15:22:33 2007 +0900
+
+    [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
+
+    au1x00_eth.c: In function 'au1x00_miiphy_write':
+    au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit f01320459736f156707425cf8112f98606301aa4
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Oct 27 15:00:25 2007 +0900
+
+    [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
+
+    au1x00_eth.c: In function 'au1x00_enet_initialize':
+    au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
+    au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
+    au1x00_eth.c:246: error: for each function it appears in.)
+    au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
+    au1x00_eth.c: In function 'au1x00_miiphy_write':
+    au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
+    make[1]: *** [au1x00_eth.o] Error 1
+
+    Fixed by moving these two functions forward.
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit b09258c5393edd1087c5f39ae68338f16b49f8b3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Oct 27 15:00:25 2007 +0900
+
+    MAKEALL: Added missing pb1000 board
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Oct 27 15:00:24 2007 +0900
+
+    [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sat Oct 27 15:00:24 2007 +0900
+
+    [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 5947f6999aafa7c54c1390983d264a8463dfea8e
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Nov 17 02:34:38 2007 +0100
+
+    Update CHANGELOIG, prepare for -rc4
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
+Author: Luotao Fu <l.fu@pengutronix.de>
+Date:	Wed Nov 14 18:58:33 2007 +0100
+
+    Fix the i2c frequency and default address in rsdproto board
+
+    rsdproto board support has wrong I2C frequency and wrong return value
+    handling.
+
+    Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
+
+commit 429c180edad038f91c989cb14b478228092e7054
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Nov 17 01:45:38 2007 +0100
+
+    powerpc: Backout relocation changes for MPC5121, too.
+
+    Apply Grant Likely's backout to MPC5121 code, too.
+
+    Pointed out by Rafal Jaworowski <raj@semihalf.com>
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Nov 13 22:18:33 2007 -0700
+
+    powerpc: Backout relocation changes.
+
+    Ugh.  I *hate* to back this change out, but these compiler flags don't
+    work for relocation on all versions of GCC.  I've not been able to
+    reproduce the environment in my setup (and hence, not been able to
+    find a combination that *does* work), so I've got no choice but to go
+    back to the old gcc flags and linker script.
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 13 09:11:05 2007 +0100
+
+    Fixed mips_io_port_base build errors.
+
+    This patch has been sent on:
+    - 29 Sep 2007
+
+    Although mips_io_port_base is currently a part of IDE command, it is quite
+    fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
+    it to MIPS general part, and introduce `set_io_port_base()' from Linux.
+
+    This patch is triggered by multiple definition of `mips_io_port_base' build
+    error on gth2 (and tb0229 also needs this fix.)
+
+    board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
+    /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
+    common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
+    make: *** [u-boot] Error 1
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Nov 17 01:30:40 2007 +0100
+
+    Fix a bug in the slave serial programming mode for the Xilinx
+    Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
+    the most significant bit was set, which did not work on any
+    architecture where "char" defaulted to be an unsigned type.
+
+    Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Nov 1 12:23:29 2007 -0500
+
+    86xx: Fix broken variable reference when #def DEBUGing.
+
+    Sometimes you can't reference the DDR2 controller variables.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:	Fri Oct 26 18:32:00 2007 +0800
+
+    make 8610 board use pixis reset
+
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:	Mon Oct 29 19:26:21 2007 +0800
+
+    Unify pixis_reset altbank across board families
+
+    Basically, refactor the CFG_PIXIS_VBOOT_MASK values
+    into the separate board config files.
+
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64bf555465c7926be13e1046ac0d0f05ac72829c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Nov 7 08:19:21 2007 +0100
+
+    Fix warning: pointer targets in assignment differ in signedness
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7a60ee7c6248a958c5757d3660a1702723a2786d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Nov 7 08:19:19 2007 +0100
+
+    Fix warning differ in signedness in common/cmd_ide.c
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4d4faae65e115e327425cd514c1a35146a85166b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:31 2007 -0600
+
+    Group PCI and PCMCIA drivers in drivers/Makefile
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5798f87dc10a496d79d3177b9f5a76488987fd35
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:31 2007 -0600
+
+    Group block/flash drivers in drivers/Makefile
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit df58c81551700f058b44cacf55a7997fa63bfe0a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:31 2007 -0600
+
+    Group USB drivers in drivers/Makefile
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:30 2007 -0600
+
+    Group i2c drivers in drivers/Makefile
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit ec00c76de0e5971273905998d62d6bb119324218
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:30 2007 -0600
+
+    Group console drivers in drivers/Makefile
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 754f230aa01b8c789fc31f8013c2487954073300
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:30 2007 -0600
+
+    Group network drivers in drivers/Makefile
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f0037c56b0d12cd46215124667b9f83d60ef9391
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:30 2007 -0600
+
+    Build: split COBJS value into multiple lines
+
+    This change is in preparation for condtitionial compile support in the
+    build system.  By spliting them all into seperate lines now, subsequent
+    patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
+    be less invasive and easier to review
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Mon Sep 24 09:05:30 2007 -0600
+
+    Add .gitignore files
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+    Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 955413f35f054a82e40042f1dbcf501c6a05719b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Thu Nov 15 08:27:52 2007 -0700
+
+    Revert "Correct relocation fixup for mpc5xx"
+
+    This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e15633888a058aacb31a62d2cf1278e1e4c236ab
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Thu Nov 15 08:24:32 2007 -0700
+
+    Revert "Correct fixup relocation for MPC5xxx"
+
+    This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Thu Nov 15 08:21:04 2007 -0700
+
+    Revert "Correct fixup relocation for mpc8220"
+
+    This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 70922342369e5e39b286fe21e768a239ca07a514
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Thu Nov 15 08:20:57 2007 -0700
+
+    Revert "Correct fixup relocation for mpc824x"
+
+    This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Thu Nov 15 08:20:50 2007 -0700
+
+    Revert "Correct fixup relocation for mpc8260"
+
+    This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Thu Nov 15 08:20:43 2007 -0700
+
+    Revert "Correct fixup relocation for mpc83xx"
+
+    This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Thu Nov 15 08:20:25 2007 -0700
+
+    Revert "[MPC512x] Correct fixup relocation"
+
+    This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Nov 13 08:18:20 2007 +0100
+
+    ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1ce55151c85d068f70317a8d65c61058b891afb4
+Author: Heiko Schocher <hs@denx.de>
+Date:	Tue Nov 13 07:50:29 2007 +0100
+
+    [UC101] SRAM now with 2 MB working.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 8d737a28152ec12873f8544cca1fb39a49e5e693
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Nov 8 12:50:18 2007 -0600
+
+    ColdFire: MCF5329 - Remove reset registers from CCM
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Nov 8 12:31:11 2007 -0600
+
+    ColdFire: MCF5329 - Add Reset structure to immap_5329.h
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Nov 8 12:19:01 2007 -0600
+
+    ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 225a24b5e062ad94627424508ae814f51dbe1a34
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Nov 7 18:00:54 2007 -0600
+
+    ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 248c7c14835f34d5d910b45e5600050e58ca6cab
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Nov 7 17:56:15 2007 -0600
+
+    ColdFire: MCF532x - Update do_reset() using core reset
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Nov 7 17:51:00 2007 -0600
+
+    ColdFire: Update cpu flag for 4.2-xx compiler
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date:	Mon Nov 5 17:39:24 2007 +0800
+
+    Implement general ULi 526x Ethernet driver support in U-boot
+
+    This patch implements general ULi 526x Ethernet driver.
+    Until now, it is the only native Ethernet port on
+    MPC8610HPCD board, but it could be used on other boards
+    with ULi 526x Ethernet port as well.
+
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
+Author: Larry Johnson <lrj@arlinx.com>
+Date:	Thu Nov 1 08:46:50 2007 -0500
+
+    NET: Add Ethernet 1000BASE-X support for PPC4xx
+
+    This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
+    "miiphy_duplex()".	It also adds function "miiphy_is_1000base_x ()", which
+    returns non-zero iff the PHY registers are configured for 1000BASE-X.  The
+    "mii info" command is modified to distinguish between 1000BASE-T and -X.
+
+    Signed-off-by: Larry Johnson <lrj@acm.org>
+    Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 298035df4948b113d29ac0e694717d34b95bc5dc
+Author: Larry Johnson <lrj@arlinx.com>
+Date:	Wed Oct 31 11:21:29 2007 -0500
+
+    NET: Cosmetic changes
+
+    Signed-off-by: Larry Johnson <lrj@acm.org>
+    Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 992742a5b09d9040adbd156fb90756af66ade310
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Nov 3 23:09:27 2007 +0100
+
+    Cleanup coding style; update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
 Author: Bruce Adler <bruce.adler@ccpu.com>
 Date:	Fri Nov 2 13:15:42 2007 -0700
@@ -161,6 +1744,26 @@ Date:	Mon Oct 29 17:40:35 2007 -0400
     Signed-off-by: Justin Flammia <jflammia@savantav.com>
     Signed-off-by: Ben Warren <bwarren@qstreams.com>
 
+commit 31548249decf18a6b877a18436b6139dd483fe4a
+Author: Justin Flammia <jflammia@savantav.com>
+Date:	Mon Oct 29 17:40:35 2007 -0400
+
+    DHCP Client Fix
+
+    This is a multi-part message in MIME format.
+
+    commit e6e505eae94ed721e123e177489291fc4544b7b8
+    Author: Justin Flammia <jflammia@savantav.com>
+    Date:   Mon Oct 29 17:19:03 2007 -0400
+
+	Found a bug in the way the DHCP Request packet is built, where the IP address
+	that is offered by the server is bound to prematurely. This patch is a fix of
+	that bug where the IP address offered by the DHCP server is not used until
+	after the DHCP ACK from the server is received.
+
+    Signed-off-by: Justin Flammia <jflammia@savantav.com>
+    Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
 Date:	Thu Oct 25 17:16:22 2007 -0500
@@ -412,6 +2015,14 @@ Date:	Tue Oct 23 10:22:16 2007 +0100
 
     Move PL01* serial drivers to drivers/serial and adjust Makefiles.
 
+commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Oct 23 10:17:42 2007 +0200
+
+    ppc4xx: lwmon5: Some further GPIO config changes
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
 Author: Vlad Lungu <vlad@comsys.ro>
 Date:	Sun Oct 21 22:10:10 2007 +0900
@@ -1000,6 +2611,56 @@ Date:	Mon Sep 24 00:08:37 2007 +0200
 
     synchronizition with mainline
 
+commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:42:38 2007 +0900
+
+    sh: Add support command of ide with sh
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:38:42 2007 +0900
+
+    sh: Update Makefile
+
+    Add support MS7722SE01 to Makefile.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:31:13 2007 +0900
+
+    sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:19:24 2007 +0900
+
+    sh: Update MS7750SE01 platform
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 516ad760db3553766267ada01b7d5d727faa4bbd
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:17:08 2007 +0900
+
+    sh: Remove comment out code from include/asm-sh/cpu_sh4.h
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b02bad128669e567fce87d8df823b06a0144b8db
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:12:30 2007 +0900
+
+    sh: Update core code of SuperH.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Thu Sep 20 00:04:14 2007 +0200
@@ -7707,6 +9368,24 @@ Date:	Tue May 15 07:55:42 2007 -0700
 
      Fix to compile JSE against 20070514 git of u-boot
 
+commit 69df3c4da0c93017cceb25a366e794570bd0ed98
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date:	Sun May 13 21:01:03 2007 +0900
+
+    sh: MS7750SE support.
+
+    This adds support for the Hitachi MS7750SE.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date:	Sun May 13 20:58:00 2007 +0900
+
+    sh: First support code of SuperH.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
 Author: Stefan Roese <sr@denx.de>
 Date:	Fri May 11 12:01:49 2007 +0200
diff --git a/CREDITS b/CREDITS
index 0953e7b95..13150aec6 100644
--- a/CREDITS
+++ b/CREDITS
@@ -117,7 +117,7 @@ N: Arun Dharankar
 E: ADharankar@ATTBI.Com
 D: threads / scheduler example code
 
-N: Kári Davíðsson
+N: K?ri Dav??sson
 E: kd@flaga.is
 D: FLAGA DM Support
 
@@ -143,7 +143,7 @@ E: info@elste.org
 D: Port for the ModNET50 Board, NET+50 CPU Port
 W: http://www.imms.de
 
-N: Daniel Engström
+N: Daniel Engstr?m
 E: daniel@omicron.se
 D: x86 port, Support for sc520_cdp board
 
@@ -334,7 +334,7 @@ N: Frank Morauf
 E: frank.morauf@salzbrenner.com
 D: Support for Embedded Planet RPX Super Board
 
-N: David Müller
+N: David M?ller
 E: d.mueller@elsoft.ch
 D: Support for Samsung ARM920T SMDK2410 eval board
 
@@ -499,3 +499,8 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
+
+N: Nobuhiro Iwamatsu
+E: iwamatsu@nigauri.org
+D: Support for SuperH, MS7750SE01 and  MS7722SE01 boards.
+W: http://www.nigauri.org/~iwamatsu/
diff --git a/MAINTAINERS b/MAINTAINERS
index b8c1fdc9d..fa0e9ea2d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -146,7 +146,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	CPCI4052		PPC405GP
 	CPCI405AB		PPC405GP
 	CPCI405DT		PPC405GP
-	CPCI440			PPC440GP
 	CPCIISER4		PPC405GP
 	DASA_SIM		IOP480 (PPC401)
 	DP405			PPC405EP
@@ -159,6 +158,7 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	PCI405			PPC405GP
 	PLU405			PPC405EP
 	PMC405			PPC405GP
+	PMC440			PPC440EPx
 	VOH405			PPC405EP
 	VOM405			PPC405EP
 	WUH405			PPC405EP
@@ -204,6 +204,10 @@ Murray Jensen <Murray.Jensen@csiro.au>
 	cogent_mpc8260		MPC8260
 	hymod			MPC8260
 
+Larry Johnson <lrj@acm.org>
+
+	korat			PPC440EPx
+
 Brad Kemp <Brad.Kemp@seranoa.com>
 
 	ppmc8260		MPC8260
@@ -303,8 +307,11 @@ Stefan Roese <sr@denx.de>
 	bamboo			PPC440EP
 	bunbinga		PPC405EP
 	ebony			PPC440GP
+	haleakala		PPC405EXr
 	katmai			PPC440SPe
+	kilauea			PPC405EX
 	lwmon5			PPC440EPx
+	makalu			PPC405EX
 	ocotea			PPC440GX
 	p3p440			PPC440GP
 	pcs440ep		PPC440EP
@@ -630,7 +637,22 @@ Hayden Fraser <Hayden.Fraser@freescale.com>
 
 Haavard Skinnemoen <hskinnemoen@atmel.com>
 
-	ATSTK1000		AT32AP7000
+	ATSTK1000		AT32AP7xxx
+	ATSTK1002		AT32AP7000
+	ATSTK1003		AT32AP7001
+	ATSTK1004		AT32AP7002
+
+#########################################################################
+# SuperH Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Nobuhiro Iwmaatsu <iwamatsu@nigauri.org>
+
+	MS7750SE		SH7750
+	MS7722SE		SH7722
 
 #########################################################################
 # End of MAINTAINERS list						#
diff --git a/MAKEALL b/MAKEALL
index 52f3cd347..9e5982332 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -168,7 +168,6 @@ LIST_4xx="		\
 	CPCI4052	\
 	CPCI405AB	\
 	CPCI405DT	\
-	CPCI440		\
 	CPCIISER4	\
 	CRAYL1		\
 	csb272		\
@@ -180,6 +179,8 @@ LIST_4xx="		\
 	ERIC		\
 	EXBITGEN	\
 	G2000		\
+	haleakala	\
+	haleakala_nand	\
 	hcu4		\
 	hcu5		\
 	HH405		\
@@ -187,8 +188,12 @@ LIST_4xx="		\
 	JSE		\
 	KAREF		\
 	katmai		\
+	kilauea		\
+	kilauea_nand	\
+	korat		\
 	luan		\
 	lwmon5		\
+	makalu		\
 	METROBOX	\
 	MIP405		\
 	MIP405T		\
@@ -203,6 +208,7 @@ LIST_4xx="		\
 	PIP405		\
 	PLU405		\
 	PMC405		\
+	PMC440		\
 	PPChameleonEVB	\
 	rainier		\
 	sbc405		\
@@ -342,6 +348,7 @@ LIST_85xx="		\
 #########################################################################
 
 LIST_86xx="		\
+	MPC8610HPCD	\
 	MPC8641HPCN	\
 	sbc8641d	\
 "
@@ -378,6 +385,7 @@ LIST_7xx="		\
 
 LIST_ppc="		\
 	${LIST_5xx}	\
+	${LIST_512x}	\
 	${LIST_5xxx}	\
 	${LIST_8xx}	\
 	${LIST_8220}	\
@@ -555,6 +563,7 @@ LIST_mips5kc_el=""
 
 LIST_au1xx0_el="	\
 	dbau1550_el	\
+	pb1000		\
 "
 
 LIST_mips_el="			\
@@ -641,6 +650,8 @@ LIST_coldfire="			\
 
 LIST_avr32="		\
 	atstk1002	\
+	atstk1003	\
+	atstk1004	\
 "
 
 #########################################################################
@@ -654,6 +665,23 @@ LIST_blackfin="		\
 	bf561-ezkit	\
 "
 
+#########################################################################
+## SH Systems
+#########################################################################
+
+LIST_sh4="		\
+	ms7750se	\
+	ms7722se	\
+"
+
+LIST_sh3=""
+
+
+LIST_sh="		\
+	${LIST_sh3}	\
+	${LIST_sh4}	\
+"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----
@@ -688,7 +716,9 @@ do
 	mips|mips_el| \
 	nios|nios2| \
 	ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \
-	x86|I486|TSEC)
+	x86|I486|TSEC| \
+	sh|sh4|sh3 \
+	)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
diff --git a/Makefile b/Makefile
index e2a367eaf..8417b0c56 100644
--- a/Makefile
+++ b/Makefile
@@ -23,8 +23,8 @@
 
 VERSION = 1
 PATCHLEVEL = 3
-SUBLEVEL = 0
-EXTRAVERSION = -rc3
+SUBLEVEL = 1
+EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
@@ -152,6 +152,9 @@ endif
 ifeq ($(ARCH),avr32)
 CROSS_COMPILE = avr32-linux-
 endif
+ifeq ($(ARCH),sh)
+CROSS_COMPILE = sh4-linux-
+endif
 endif
 endif
 
@@ -205,22 +208,30 @@ LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs
 	fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
-LIBS += rtc/librtc.a
-LIBS += dtt/libdtt.a
-LIBS += drivers/libdrivers.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
-LIBS += drivers/nand/libnand.a
-LIBS += drivers/nand_legacy/libnand_legacy.a
-LIBS += drivers/onenand/libonenand.a
+LIBS += drivers/block/libblock.a
+LIBS += drivers/hwmon/libhwmon.a
+LIBS += drivers/i2c/libi2c.a
+LIBS += drivers/input/libinput.a
+LIBS += drivers/misc/libmisc.a
+LIBS += drivers/mtd/libmtd.a
+LIBS += drivers/mtd/nand/libnand.a
+LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
+LIBS += drivers/mtd/onenand/libonenand.a
 LIBS += drivers/net/libnet.a
+LIBS += drivers/net/sk98lin/libsk98lin.a
+LIBS += drivers/pci/libpci.a
+LIBS += drivers/pcmcia/libpcmcia.a
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/qe.a
 endif
 ifeq ($(CPU),mpc85xx)
 LIBS += drivers/qe/qe.a
 endif
+LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
-LIBS += drivers/sk98lin/libsk98lin.a
+LIBS += drivers/usb/libusb.a
+LIBS += drivers/video/libvideo.a
 LIBS += post/libpost.a post/drivers/libpostdrivers.a
 LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
 	"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
@@ -323,25 +334,65 @@ env:
 depend dep:	version
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
+TAG_SUBDIRS += include
+TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
+TAG_SUBDIRS += cpu/$(CPU)
+TAG_SUBDIRS += lib_$(ARCH)
+TAG_SUBDIRS += fs/cramfs
+TAG_SUBDIRS += fs/fat
+TAG_SUBDIRS += fs/fdos
+TAG_SUBDIRS += fs/jffs2
+TAG_SUBDIRS += net
+TAG_SUBDIRS += disk
+TAG_SUBDIRS += common
+TAG_SUBDIRS += drivers/bios_emulator
+TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/hwmon
+TAG_SUBDIRS += drivers/i2c
+TAG_SUBDIRS += drivers/input
+TAG_SUBDIRS += drivers/misc
+TAG_SUBDIRS += drivers/mtd
+TAG_SUBDIRS += drivers/mtd/nand
+TAG_SUBDIRS += drivers/mtd/nand_legacy
+TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/net
+TAG_SUBDIRS += drivers/net/sk98lin
+TAG_SUBDIRS += drivers/pci
+TAG_SUBDIRS += drivers/pcmcia
+TAG_SUBDIRS += drivers/qe
+TAG_SUBDIRS += drivers/rtc
+TAG_SUBDIRS += drivers/serial
+TAG_SUBDIRS += drivers/usb
+TAG_SUBDIRS += drivers/video
+
 tags ctags:
-		ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
-				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
-				fs/cramfs fs/fat fs/fdos fs/jffs2 \
-				net disk rtc dtt drivers drivers/sk98lin common \
-			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+		ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+						-name '*.[ch]' -print`
 
 etags:
-		etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
-				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
-				fs/cramfs fs/fat fs/fdos fs/jffs2 \
-				net disk rtc dtt drivers drivers/sk98lin common \
-			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+		etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+						-name '*.[ch]' -print`
 
 $(obj)System.map:	$(obj)u-boot
 		@$(NM) $< | \
 		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 		sort > $(obj)System.map
 
+#
+# Auto-generate the autoconf.mk file (which is included by all makefiles)
+#
+# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
+# the dep file is only include in this top level makefile to determine when
+# to regenerate the autoconf.mk file.
+$(OBJTREE)/include/autoconf.mk: $(obj)include/config.h
+	@echo Generating include/autoconf.mk
+	@# Generate the dependancies
+	@$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep
+	@# Extract the config macros
+	@$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed >> $@
+
+sinclude $(OBJTREE)/include/autoconf.mk.dep
+
 #########################################################################
 else
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
@@ -361,7 +412,8 @@ CHANGELOG:
 
 unconfig:
 	@rm -f $(obj)include/config.h $(obj)include/config.mk \
-		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp
+		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
+		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 
 #========================================================================
 # PowerPC
@@ -1111,9 +1163,6 @@ CPCI405AB_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
 	@echo "BOARD_REVISION = $(@:_config=)"	>> $(obj)include/config.mk
 
-CPCI440_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
-
 CPCIISER4_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
 
@@ -1168,12 +1217,32 @@ KAREF_config: unconfig
 katmai_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
 
+# Kilauea & Haleakala images are identical (recognized via PVR)
+kilauea_config \
+haleakala_config: unconfig
+	@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+
+kilauea_nand_config \
+haleakala_nand_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
+	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
+	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
+korat_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
+
 luan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
 
 lwmon5_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
 
+makalu_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
+
 METROBOX_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
 
@@ -1217,6 +1286,9 @@ PLU405_config:	unconfig
 PMC405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
 
+PMC440_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
+
 PPChameleonEVB_config		\
 PPChameleonEVB_BA_25_config	\
 PPChameleonEVB_ME_25_config	\
@@ -1610,14 +1682,14 @@ TQM8265_AA_config:  unconfig
 	fi; \
 	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
 	echo "... with $${CFREQ}MHz system clock" ; \
-	if [ "$${CACHE}" == "yes" ] ; then \
+	if [ "$${CACHE}" = "yes" ] ; then \
 		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
 		echo "... with L2 Cache support" ; \
 	else \
 		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
 		echo "... without L2 Cache support" ; \
 	fi; \
-	if [ "$${BMODE}" == "60x" ] ; then \
+	if [ "$${BMODE}" = "60x" ] ; then \
 		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
 		echo "... with 60x Bus Mode" ; \
 	else \
@@ -1731,7 +1803,7 @@ M54455EVB_i66_config :	unconfig
 	M54455EVB_i66_config)		FLASH=INTEL; FREQ=66666666;; \
 	esac; \
 	>include/config.h ; \
-	if [ "$${FLASH}" == "INTEL" ] ; then \
+	if [ "$${FLASH}" = "INTEL" ] ; then \
 		echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
@@ -1862,7 +1934,7 @@ TQM834x_config:	unconfig
 #########################################################################
 
 MPC8540ADS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
 
 MPC8540EVAL_config \
 MPC8540EVAL_33_config \
@@ -1886,7 +1958,7 @@ MPC8540EVAL_66_slave_config:      unconfig
 	@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
 
 MPC8560ADS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
 
 MPC8541CDS_legacy_config \
 MPC8541CDS_config:	unconfig
@@ -1896,7 +1968,7 @@ MPC8541CDS_config:	unconfig
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
 		echo "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
+	@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
 
 MPC8544DS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
@@ -1909,7 +1981,7 @@ MPC8548CDS_config:	unconfig
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
 		echo "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
+	@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
 
 MPC8555CDS_legacy_config \
 MPC8555CDS_config:	unconfig
@@ -1919,10 +1991,10 @@ MPC8555CDS_config:	unconfig
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
 		echo "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
+	@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
 
 MPC8568MDS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
 
 PM854_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
@@ -1989,6 +2061,9 @@ TQM8560_config:		unconfig
 ## MPC86xx Systems
 #########################################################################
 
+MPC8610HPCD_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+
 MPC8641HPCN_config:    unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
 
@@ -2610,7 +2685,30 @@ bf561-ezkit_config:	unconfig
 #########################################################################
 
 atstk1002_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1003_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1004_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+#########################################################################
+#########################################################################
+#########################################################################
+
+#########################################################################
+## sh4 (Renesas SuperH)
+#########################################################################
+ms7750se_config: unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7750SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7750se
+
+ms7722se_config :       unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7722SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7722se
 
 #########################################################################
 #########################################################################
diff --git a/README b/README
index 3dad5fc72..26f93c21a 100644
--- a/README
+++ b/README
@@ -235,9 +235,7 @@ The following options need to be configured:
 - Board Type:	Define exactly one, e.g. CONFIG_MPC8540ADS.
 
 - CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
-		Define exactly one of
-		CONFIG_ATSTK1002
-
+		Define exactly one, e.g. CONFIG_ATSTK1002
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
diff --git a/board/ads5121/u-boot.lds b/board/ads5121/u-boot.lds
index 34ceb0fda..038d84955 100644
--- a/board/ads5121/u-boot.lds
+++ b/board/ads5121/u-boot.lds
@@ -51,6 +51,7 @@ SECTIONS
   {
     cpu/mpc512x/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 00c793afd..c4eace580 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -67,13 +67,13 @@ const unsigned char cfg_simulate_spd_eeprom[128] = {
 	0x00,    /* Module data width continued: +0 */
 	0x04,    /* 2.5 Volt */
 	0x75,    /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */
+	0x00,    /* SDRAM Access from clock */
 #ifdef CONFIG_DDR_ECC
 	0x02,    /* ECC ON : 02 OFF : 00 */
 #else
 	0x00,    /* ECC ON : 02 OFF : 00 */
 #endif
-	0x82,    /* refresh Rate Type: Normal (15.625us) + Self refresh */
-	0,
+	0x82,    /* refresh Rate Type: Normal (7.8us) + Self refresh */
 	0,
 	0,
 	0x01,    /* wcsbc = 1 */
diff --git a/board/amcc/bubinga/u-boot.lds b/board/amcc/bubinga/u-boot.lds
index be030923b..b08c9994b 100644
--- a/board/amcc/bubinga/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
index 5a1c5b1af..e32b03069 100644
--- a/board/amcc/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ebony/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index a49066fcc..25c9a22fe 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -24,21 +24,16 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
-#include <asm-ppc/gpio.h>
-
-#include "../cpu/ppc4xx/440spe_pcie.h"
-
-#undef PCIE_ENDPOINT
-/* #define PCIE_ENDPOINT 1 */
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/4xx_pcie.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 int board_early_init_f (void)
 {
 	unsigned long mfr;
@@ -224,10 +219,9 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts*/
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts*/
 
-/* SDR0_MFR should be part of Ethernet init */
-	mfsdr (sdr_mfr, mfr);
-	mfr &= ~SDR0_MFR_ECS_MASK;
-/*	mtsdr(sdr_mfr, mfr); */
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
 
 	mtsdr(SDR0_PFC0, CFG_PFC0);
 
@@ -396,6 +390,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -409,12 +404,13 @@ void pcie_setup_hoses(int busno)
 		if (!katmai_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
- 		if (ppc440spe_init_pcie_endport(i)) {
-#else
-		if (ppc440spe_init_pcie_rootport(i)) {
-#endif
-			printf("PCIE%d: initialization failed\n", i);
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -428,35 +424,33 @@ void pcie_setup_hoses(int busno)
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMSIZE,
-			       PCI_REGION_MEM
-			);
+			       PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
-		ppc440spe_setup_pcie_endpoint(hose, i);
-		/*
-		 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
-		 */
-#else
-		ppc440spe_setup_pcie_rootpoint(hose, i);
-
-		env = getenv ("pciscandelay");
-		if (env != NULL) {
-			delay = simple_strtoul (env, NULL, 10);
-			if (delay > 5)
-				printf ("Warning, expect noticable delay before PCIe"
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
 		}
-
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
 	}
 }
 #endif	/* defined(CONFIG_PCI) */
@@ -541,3 +535,24 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile
new file mode 100644
index 000000000..b8da25ff4
--- /dev/null
+++ b/board/amcc/kilauea/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
new file mode 100644
index 000000000..b2666dd83
--- /dev/null
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk
new file mode 100644
index 000000000..f5800ebe8
--- /dev/null
+++ b/board/amcc/kilauea/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/amcc/kilauea/init.S b/board/amcc/kilauea/init.S
new file mode 100644
index 000000000..43387445b
--- /dev/null
+++ b/board/amcc/kilauea/init.S
@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from UDTech and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=256MByte (6), mode=7 (n*10*8) */
+	mtsdram_as(SDRAM_MB0CF, 0x00006701);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram_as(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram_as(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram_as(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+	blr
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
new file mode 100644
index 000000000..2ee896abd
--- /dev/null
+++ b/board/amcc/kilauea/kilauea.c
@@ -0,0 +1,392 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/*
+	 * Configure FPGA register with PCIe reset
+	 */
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc0);	/* assert PCIe reset */
+	mdelay(50);
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc3);	/* deassert PCIe reset */
+
+	/* Configure 405EX for NAND usage */
+	val = SDR0_CUST0_MUX_NDFC_SEL |
+		SDR0_CUST0_NDFC_ENABLE |
+		SDR0_CUST0_NDFC_BW_8_BIT |
+		SDR0_CUST0_NRB_BUSY |
+		(0x80000000 >> (28 + CFG_NAND_CS));
+	mtsdr(SDR0_CUST0, val);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int board_emac_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+static int board_pcie_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+	u32 pvr = get_pvr();
+
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
+	else
+		printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < board_pcie_count(); i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/kilauea/memory.c b/board/amcc/kilauea/memory.c
new file mode 100644
index 000000000..1d7a3fad9
--- /dev/null
+++ b/board/amcc/kilauea/memory.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif
diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds
new file mode 100644
index 000000000..a5dae0e98
--- /dev/null
+++ b/board/amcc/kilauea/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    /* Align to next NAND block */
+    . = ALIGN(0x4000);
+    common/environment.o  (.ppcenv)
+    /* Keep some space here for redundant env and potential bad env blocks */
+    . = ALIGN(0x10000);
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/kilauea/u-boot.lds b/board/amcc/kilauea/u-boot.lds
new file mode 100644
index 000000000..390b3f397
--- /dev/null
+++ b/board/amcc/kilauea/u-boot.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 0067ce0e7..f964511c5 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -39,6 +39,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  ************************************************************************/
 int board_early_init_f(void)
 {
+	u32 mfr;
+
 	mtebc( pb0ap,  0x03800000 );	/* set chip selects */
 	mtebc( pb0cr,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
 	mtebc( pb1ap,  0x03800000 );
@@ -64,6 +66,10 @@ int board_early_init_f(void)
 	mtdcr( uic0sr, 0x00000000 );	/* clear all interrupts */
 	mtdcr( uic0sr, 0xffffffff );
 
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
+
 	return  0;
 }
 
diff --git a/board/amcc/makalu/Makefile b/board/amcc/makalu/Makefile
new file mode 100644
index 000000000..b8da25ff4
--- /dev/null
+++ b/board/amcc/makalu/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
new file mode 100644
index 000000000..b2666dd83
--- /dev/null
+++ b/board/amcc/makalu/cmd_pll.c
@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
diff --git a/post/board/lwmon5/Makefile b/board/amcc/makalu/config.mk
index c3f54e37b..a46b19724 100644
--- a/post/board/lwmon5/Makefile
+++ b/board/amcc/makalu/config.mk
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002-2007
+# (C) Copyright 2000
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,9 +21,4 @@
 # MA 02111-1307 USA
 #
 
-
-LIB	= libpostlwmon5.a
-
-COBJS	= ecc.o
-
-include $(TOPDIR)/post/rules.mk
+TEXT_BASE = 0xFFFA0000
diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S
new file mode 100644
index 000000000..57c1774e0
--- /dev/null
+++ b/board/amcc/makalu/init.S
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from Senao and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB0CF, 0x00005201);
+
+	/* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR,0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+#endif
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+
+	blr
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
new file mode 100644
index 000000000..15e51f429
--- /dev/null
+++ b/board/amcc/makalu/makalu.c
@@ -0,0 +1,352 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/* Reset PCIe slots */
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 0);
+	udelay(100);
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 1);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Makalu - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < 2; i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/makalu/memory.c b/board/amcc/makalu/memory.c
new file mode 100644
index 000000000..b03b60b8f
--- /dev/null
+++ b/board/amcc/makalu/memory.c
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	/*
+	 * Same as on Kilauea, Makalu generates exception 0x200
+	 * (machine check) after trap_init() in board_init_f,
+	 * when SDRAM is initialized here (late) and d-cache is
+	 * used earlier as INIT_RAM.
+	 * So for now, initialize DDR2 in init.S very early and
+	 * also use it for INIT_RAM. Then this exception doesn't
+	 * occur.
+	 */
+#if 0
+	u32 val;
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram(SDRAM_MB0CF, 0x00005201);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram(SDRAM_MMODE, 0x00000442);
+	mtsdram(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram(SDRAM_INITPLR11, 0x81000442);
+	mtsdram(SDRAM_INITPLR12, 0x81010780);
+	mtsdram(SDRAM_INITPLR13, 0x81010400);
+	mtsdram(SDRAM_INITPLR14, 0x00000000);
+	mtsdram(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram(SDRAM_CODT, 0x0080f837);
+	mtsdram(SDRAM_MODT0, 0x01800000);
+	mtsdram(SDRAM_MODT1, 0x00000000);
+
+	mtsdram(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	do {
+		mfsdram(SDRAM_MCSTAT, val);
+	} while ((val & SDRAM_MCSTAT_MIC_COMP) != SDRAM_MCSTAT_MIC_COMP);
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mfsdram(SDRAM_MCOPT2, val);
+	val |= SDRAM_MCOPT2_DCEN_ENABLE;
+	mtsdram(SDRAM_MCOPT2, val);
+#endif
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif
diff --git a/board/amcc/makalu/u-boot.lds b/board/amcc/makalu/u-boot.lds
new file mode 100644
index 000000000..390b3f397
--- /dev/null
+++ b/board/amcc/makalu/u-boot.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
index 316fee88c..0daca70b7 100644
--- a/board/amcc/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ocotea/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 5fe3af9a0..ff6ae669e 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -20,57 +20,9 @@
  */
 
 #include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
 #include <config.h>
 
-/* General */
-#define TLB_VALID   0x00000200
-#define _256M       0x10000000
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
 /**************************************************************************
  * TLB TABLE
  *
@@ -98,7 +50,11 @@ tlbtab:
 #endif
 
 	/* TLB-entry for DDR SDRAM (Up to 2GB) */
+#ifdef CONFIG_4xx_DCACHE
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+#else
 	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#endif
 
 #ifdef CFG_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h
index 7f847aa2a..6a7bf01ef 100644
--- a/board/amcc/sequoia/sdram.h
+++ b/board/amcc/sequoia/sdram.h
@@ -395,8 +395,8 @@
 #define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
 #define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
 #define DDR0_26_TREF_MASK                 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FFF)
 
 #define DDR0_27                         0x1B
 #define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 4e47ab395..37b4f31b9 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -23,9 +23,11 @@
  */
 
 #include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <ppc440.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <ppc440.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -46,31 +48,31 @@ int board_early_init_f(void)
 	 * Setup the GPIO pins
 	 *-------------------------------------------------------------------*/
 	/* test-only: take GPIO init from pcs440ep ???? in config file */
-	out32(GPIO0_OR, 0x00000000);
-	out32(GPIO0_TCR, 0x0000000f);
-	out32(GPIO0_OSRL, 0x50015400);
-	out32(GPIO0_OSRH, 0x550050aa);
-	out32(GPIO0_TSRL, 0x50015400);
-	out32(GPIO0_TSRH, 0x55005000);
-	out32(GPIO0_ISR1L, 0x50000000);
-	out32(GPIO0_ISR1H, 0x00000000);
-	out32(GPIO0_ISR2L, 0x00000000);
-	out32(GPIO0_ISR2H, 0x00000100);
-	out32(GPIO0_ISR3L, 0x00000000);
-	out32(GPIO0_ISR3H, 0x00000000);
-
-	out32(GPIO1_OR, 0x00000000);
-	out32(GPIO1_TCR, 0xc2000000);
-	out32(GPIO1_OSRL, 0x5c280000);
-	out32(GPIO1_OSRH, 0x00000000);
-	out32(GPIO1_TSRL, 0x0c000000);
-	out32(GPIO1_TSRH, 0x00000000);
-	out32(GPIO1_ISR1L, 0x00005550);
-	out32(GPIO1_ISR1H, 0x00000000);
-	out32(GPIO1_ISR2L, 0x00050000);
-	out32(GPIO1_ISR2H, 0x00000000);
-	out32(GPIO1_ISR3L, 0x01400000);
-	out32(GPIO1_ISR3H, 0x00000000);
+	out_be32((u32 *) GPIO0_OR, 0x00000000);
+	out_be32((u32 *) GPIO0_TCR, 0x0000000f);
+	out_be32((u32 *) GPIO0_OSRL, 0x50015400);
+	out_be32((u32 *) GPIO0_OSRH, 0x550050aa);
+	out_be32((u32 *) GPIO0_TSRL, 0x50015400);
+	out_be32((u32 *) GPIO0_TSRH, 0x55005000);
+	out_be32((u32 *) GPIO0_ISR1L, 0x50000000);
+	out_be32((u32 *) GPIO0_ISR1H, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR2L, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR2H, 0x00000100);
+	out_be32((u32 *) GPIO0_ISR3L, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR3H, 0x00000000);
+
+	out_be32((u32 *) GPIO1_OR, 0x00000000);
+	out_be32((u32 *) GPIO1_TCR, 0xc2000000);
+	out_be32((u32 *) GPIO1_OSRL, 0x5c280000);
+	out_be32((u32 *) GPIO1_OSRH, 0x00000000);
+	out_be32((u32 *) GPIO1_TSRL, 0x0c000000);
+	out_be32((u32 *) GPIO1_TSRH, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR1L, 0x00005550);
+	out_be32((u32 *) GPIO1_ISR1H, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR2L, 0x00050000);
+	out_be32((u32 *) GPIO1_ISR2H, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR3L, 0x01400000);
+	out_be32((u32 *) GPIO1_ISR3H, 0x00000000);
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -100,16 +102,16 @@ int board_early_init_f(void)
 	mtdcr(uic2sr, 0xffffffff);	/* clear all */
 
 	/* 50MHz tmrclk */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
 
 	/* clear write protects */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
 
 	/* enable Ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
 
 	/* enable USB device */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+	out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
 
 	/* select Ethernet pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -583,3 +585,24 @@ int post_hotkeys_pressed(void)
 	return 0;	/* No hotkeys supported */
 }
 #endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds
index be030923b..b08c9994b 100644
--- a/board/amcc/taihu/u-boot.lds
+++ b/board/amcc/taihu/u-boot.lds
@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
index 57b9d1c42..040b8004d 100644
--- a/board/amcc/taishan/showinfo.c
+++ b/board/amcc/taishan/showinfo.c
@@ -33,25 +33,25 @@ void show_reset_reg(void)
 
 	/* read clock regsiter */
 	printf("===== Display reset and initialize register Start =========\n");
-	mfclk(clk_pllc,reg);
+	mfcpr(clk_pllc,reg);
 	printf("cpr_pllc   = %#010x\n",reg);
 
-	mfclk(clk_plld,reg);
+	mfcpr(clk_plld,reg);
 	printf("cpr_plld   = %#010x\n",reg);
 
-	mfclk(clk_primad,reg);
+	mfcpr(clk_primad,reg);
 	printf("cpr_primad = %#010x\n",reg);
 
-	mfclk(clk_primbd,reg);
+	mfcpr(clk_primbd,reg);
 	printf("cpr_primbd = %#010x\n",reg);
 
-	mfclk(clk_opbd,reg);
+	mfcpr(clk_opbd,reg);
 	printf("cpr_opbd   = %#010x\n",reg);
 
-	mfclk(clk_perd,reg);
+	mfcpr(clk_perd,reg);
 	printf("cpr_perd   = %#010x\n",reg);
 
-	mfclk(clk_mald,reg);
+	mfcpr(clk_mald,reg);
 	printf("cpr_mald   = %#010x\n",reg);
 
 	/* read sdr register */
diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds
index 664716ed4..b2be35288 100644
--- a/board/amcc/taishan/u-boot.lds
+++ b/board/amcc/taishan/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/taishan/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/walnut/u-boot.lds b/board/amcc/walnut/u-boot.lds
index 1dcbab5a2..fa75ddecd 100644
--- a/board/amcc/walnut/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds
index a9a7b0af6..978319fd6 100644
--- a/board/amcc/yosemite/u-boot.lds
+++ b/board/amcc/yosemite/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/yosemite/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds
index 9df4f925c..c9cf4dbf8 100644
--- a/board/amcc/yucca/u-boot.lds
+++ b/board/amcc/yucca/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o		(.text)
     board/amcc/yucca/init.o	(.text)
-    cpu/ppc4xx/kgdb.o		(.text)
-    cpu/ppc4xx/traps.o		(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/yucca/u-boot.lds.debug b/board/amcc/yucca/u-boot.lds.debug
deleted file mode 100644
index 474f92216..000000000
--- a/board/amcc/yucca/u-boot.lds.debug
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o		(.text)
-    board/amcc/yucca/init.o	(.text)
-    cpu/ppc4xx/kgdb.o		(.text)
-    cpu/ppc4xx/traps.o		(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index d7cc384ba..52486cc4c 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -27,29 +27,17 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/4xx_pcie.h>
 
 #include "yucca.h"
-#include "../cpu/ppc4xx/440spe_pcie.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#undef PCIE_ENDPOINT
-/* #define PCIE_ENDPOINT 1 */
-
 void fpga_init (void);
 
-void get_sys_info(PPC440_SYS_INFO *board_cfg );
-int compare_to_true(char *str );
-char *remove_l_w_space(char *in_str );
-char *remove_t_w_space(char *in_str );
-int get_console_port(void);
-
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 #define DEBUG_ENV
 #ifdef DEBUG_ENV
 #define DEBUGF(fmt,args...) printf(fmt ,##args)
@@ -541,10 +529,10 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
 
-	/* SDR0_MFR should be part of Ethernet init */
-	mfsdr (sdr_mfr, mfr);
-	mfr &= ~SDR0_MFR_ECS_MASK;
-	/*mtsdr(sdr_mfr, mfr);*/
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
+
 	fpga_init();
 
 	return 0;
@@ -850,6 +838,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -863,14 +852,16 @@ void pcie_setup_hoses(int busno)
 		if (!yucca_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
- 		yucca_setup_pcie_fpga_endpoint(i);
- 		if (ppc440spe_init_pcie_endport(i)) {
-#else
-		yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc440spe_init_pcie_rootport(i)) {
-#endif
-			printf("PCIE%d: initialization failed\n", i);
+		if (is_end_point(i)) {
+			yucca_setup_pcie_fpga_endpoint(i);
+			ret = ppc4xx_init_pcie_endport(i);
+		} else {
+			yucca_setup_pcie_fpga_rootpoint(i);
+			ret = ppc4xx_init_pcie_rootport(i);
+		}
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -884,35 +875,33 @@ void pcie_setup_hoses(int busno)
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMSIZE,
-			PCI_REGION_MEM
-			);
+			PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
-		ppc440spe_setup_pcie_endpoint(hose, i);
-		/*
-		 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
-		 */
-#else
-		ppc440spe_setup_pcie_rootpoint(hose, i);
-
-		env = getenv ("pciscandelay");
-		if (env != NULL) {
-			delay = simple_strtoul (env, NULL, 10);
-			if (delay > 5)
-				printf ("Warning, expect noticable delay before PCIe"
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
-		}
+		if (is_end_point(i)) {
+			ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		 	 */
+		} else {
+			ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv("pciscandelay");
+			if (env != NULL) {
+				delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
 
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
+			/*
+			 * Config access can only go down stream
+		 	 */
+			hose->last_busno = pci_hose_scan(hose);
+			bus = hose->last_busno + 1;
+		}
 	}
 }
 #endif	/* defined(CONFIG_PCI) */
diff --git a/board/amirix/ap1000/u-boot.lds b/board/amirix/ap1000/u-boot.lds
index 109e7fe3e..3d5b57586 100644
--- a/board/amirix/ap1000/u-boot.lds
+++ b/board/amirix/ap1000/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index e2ab5b8e2..79fb71dc7 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -263,7 +263,6 @@ static void ft_blob_update(void *blob, bd_t *bd)
 {
 	int len, ret, nodeoffset = 0;
 	char module_name[MODULE_NAME_MAXLEN] = {0};
-	ulong memory_data[2] = {0};
 
 	compose_module_name(hw_id, module_name);
 	len = strlen(module_name) + 1;
@@ -273,22 +272,12 @@ static void ft_blob_update(void *blob, bd_t *bd)
 	printf("ft_blob_update(): cannot set /model property err:%s\n",
 		fdt_strerror(ret));
 
-	memory_data[0] = cpu_to_be32(bd->bi_memstart);
-	memory_data[1] = cpu_to_be32(bd->bi_memsize);
+	ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
-	nodeoffset = fdt_find_node_by_path (blob, "/memory");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
-					sizeof(memory_data));
-	if (ret < 0)
+	if (ret < 0) {
 		printf("ft_blob_update): cannot set /memory/reg "
 			"property err:%s\n", fdt_strerror(ret));
 	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /memory node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
 }
 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
 
diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds
index d87a39b24..5ce2694cb 100644
--- a/board/cogent/u-boot.lds
+++ b/board/cogent/u-boot.lds
@@ -55,6 +55,7 @@ SECTIONS
   {
     *(.text)
     common/environment.o(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;
diff --git a/board/cray/L1/u-boot.lds b/board/cray/L1/u-boot.lds
index cf4bbb921..6d3e171cc 100644
--- a/board/cray/L1/u-boot.lds
+++ b/board/cray/L1/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     board/cray/L1/init.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/csb272/u-boot.lds b/board/csb272/u-boot.lds
index d75d6d1ce..a664d0f5f 100644
--- a/board/csb272/u-boot.lds
+++ b/board/csb272/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/csb472/u-boot.lds b/board/csb472/u-boot.lds
index 14ac3fb4f..8765016a2 100644
--- a/board/csb472/u-boot.lds
+++ b/board/csb472/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index 481d29187..d40ee62ef 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index d29e8d591..a13eeeb12 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -25,6 +25,7 @@
 #include <command.h>
 #include <asm/au1x00.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 
 long int initdram(int board_type)
 {
@@ -77,6 +78,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #ifdef CONFIG_IDE_PCMCIA
 	/* Enable 3.3 V on slot 0 ( VCC )
 	   No 5V */
diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds
index 9639b81ac..861873272 100644
--- a/board/dbau1x00/u-boot.lds
+++ b/board/dbau1x00/u-boot.lds
@@ -54,10 +54,11 @@ SECTIONS
 
 	.sdata  : { *(.sdata) }
 
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/board/eric/u-boot.lds b/board/eric/u-boot.lds
index 4a0e5b4ae..de51b3f62 100644
--- a/board/eric/u-boot.lds
+++ b/board/eric/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/esd/apc405/u-boot.lds b/board/esd/apc405/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/apc405/u-boot.lds
+++ b/board/esd/apc405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/ar405/u-boot.lds b/board/esd/ar405/u-boot.lds
index 3b9aa7c5d..64293d21a 100644
--- a/board/esd/ar405/u-boot.lds
+++ b/board/esd/ar405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o		(.text)
     cpu/ppc4xx/traps.o		(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/4xx_uart.o		(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o		(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/esd/ash405/u-boot.lds b/board/esd/ash405/u-boot.lds
index 95854f293..b49e3ff9f 100644
--- a/board/esd/ash405/u-boot.lds
+++ b/board/esd/ash405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/canbt/u-boot.lds b/board/esd/canbt/u-boot.lds
index ff15b3fef..aaaccbeae 100644
--- a/board/esd/canbt/u-boot.lds
+++ b/board/esd/canbt/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o		(.text)
     cpu/ppc4xx/traps.o		(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/4xx_uart.o		(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o		(.text)
     common/dlmalloc.o		(.text)
diff --git a/board/esd/cms700/u-boot.lds b/board/esd/cms700/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/cms700/u-boot.lds
+++ b/board/esd/cms700/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index 196171ce5..4116838b2 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 
+#include "asm/io.h"
 #include "lcd.h"
 
 
@@ -45,11 +46,10 @@ void lcd_setup(int lcd, int config)
 		 */
 		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */
 		udelay(10); /* wait 10us */
-		if (config == 1) {
+		if (config == 1)
 			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
-		} else {
+		else
 			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
-		}
 		udelay(10); /* wait 10us */
 		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */
 	} else {
@@ -58,11 +58,10 @@ void lcd_setup(int lcd, int config)
 		 */
 		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */
 		udelay(10); /* wait 10us */
-		if (config == 1) {
+		if (config == 1)
 			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
-		} else {
+		else
 			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
-		}
 		udelay(10); /* wait 10us */
 		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */
 	}
@@ -104,12 +103,10 @@ void lcd_bmp(uchar *logo_bmp)
 			printf("Error: malloc in gunzip failed!\n");
 			return;
 		}
-		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)logo_bmp, &len) != 0) {
+		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)logo_bmp, &len) != 0)
 			return;
-		}
-		if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
+		if (len == CFG_VIDEO_LOGO_MAX_SIZE)
 			printf("Image could be truncated (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
-		}
 
 		/*
 		 * Check for bmp mark 'BM'
@@ -152,9 +149,8 @@ void lcd_bmp(uchar *logo_bmp)
 		break;
 	default:
 		printf("LCD: Unknown bpp (%d) im image!\n", bpp);
-		if ((dst != NULL) && (dst != (uchar *)logo_bmp)) {
+		if ((dst != NULL) && (dst != (uchar *)logo_bmp))
 			free(dst);
-		}
 		return;
 	}
 	printf(" (%d*%d, %dbpp)\n", width, height, bpp);
@@ -212,9 +208,8 @@ void lcd_bmp(uchar *logo_bmp)
 		}
 	}
 
-	if ((dst != NULL) && (dst != (uchar *)logo_bmp)) {
+	if ((dst != NULL) && (dst != (uchar *)logo_bmp))
 		free(dst);
-	}
 }
 
 
@@ -229,10 +224,10 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 	/*
 	 * Detect epson
 	 */
-	lcd_reg[0] = 0x00;
-	lcd_reg[1] = 0x00;
+	out_8(&lcd_reg[0], 0x00);
+	out_8(&lcd_reg[1], 0x00);
 
-	if (lcd_reg[0] == 0x1c) {
+	if (in_8(&lcd_reg[0]) == 0x1c) {
 		/*
 		 * Big epson detected
 		 */
@@ -241,7 +236,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		palette_value = 0x1e4;
 		lcd_depth = 16;
 		puts("LCD:   S1D13806");
-	} else if (lcd_reg[1] == 0x1c) {
+	} else if (in_8(&lcd_reg[1]) == 0x1c) {
 		/*
 		 * Big epson detected (with register swap bug)
 		 */
@@ -250,7 +245,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		palette_value = 0x1e5;
 		lcd_depth = 16;
 		puts("LCD:   S1D13806S");
-	} else if (lcd_reg[0] == 0x18) {
+	} else if (in_8(&lcd_reg[0]) == 0x18) {
 		/*
 		 * Small epson detected (704)
 		 */
@@ -259,7 +254,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		palette_value = 0x17;
 		lcd_depth = 8;
 		puts("LCD:   S1D13704");
-	} else if (lcd_reg[0x10000] == 0x24) {
+	      } else if (in_8(&lcd_reg[0x10000]) == 0x24) {
 		/*
 		 * Small epson detected (705)
 		 */
@@ -277,7 +272,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 	/*
 	 * Setup lcd controller regs
 	 */
-	for (i = 0; i<reg_count; i++) {
+	for (i = 0; i < reg_count; i++) {
 		s1dReg = regs[i].Index;
 		if (reg_byte_swap) {
 			if ((s1dReg & 0x0001) == 0)
diff --git a/board/esd/cpci2dp/u-boot.lds b/board/esd/cpci2dp/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/cpci2dp/u-boot.lds
+++ b/board/esd/cpci2dp/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/cpci405/u-boot.lds b/board/esd/cpci405/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/cpci405/u-boot.lds
+++ b/board/esd/cpci405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/cpci440/cpci440.c b/board/esd/cpci440/cpci440.c
deleted file mode 100644
index 43d8a3b3b..000000000
--- a/board/esd/cpci440/cpci440.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * (C) Copyright 2002
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-extern void lxt971_no_sleep(void);
-
-
-long int fixed_sdram( void );
-
-int board_early_init_f (void)
-{
-	uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr( ebccfga, xbcfg );
-	reg = mfdcr( ebccfgd );
-	mtdcr( ebccfgd, reg | 0x04000000 );	/* Set ATC */
-
-	mtebc( pb0ap, 0x92015480 );	/* FLASH/SRAM */
-	mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */
-	/* test-only: other regs still missing... */
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr( uic0sr, 0xffffffff );    /* clear all */
-	mtdcr( uic0er, 0x00000000 );    /* disable all */
-	mtdcr( uic0cr, 0x00000009 );    /* SMI & UIC1 crit are critical */
-	mtdcr( uic0pr, 0xfffffe13 );    /* per ref-board manual */
-	mtdcr( uic0tr, 0x01c00008 );    /* per ref-board manual */
-	mtdcr( uic0vr, 0x00000001 );    /* int31 highest, base=0x000 */
-	mtdcr( uic0sr, 0xffffffff );    /* clear all */
-
-	mtdcr( uic1sr, 0xffffffff );    /* clear all */
-	mtdcr( uic1er, 0x00000000 );    /* disable all */
-	mtdcr( uic1cr, 0x00000000 );    /* all non-critical */
-	mtdcr( uic1pr, 0xffffe0ff );    /* per ref-board manual */
-	mtdcr( uic1tr, 0x00ffc000 );    /* per ref-board manual */
-	mtdcr( uic1vr, 0x00000001 );    /* int31 highest, base=0x000 */
-	mtdcr( uic1sr, 0xffffffff );    /* clear all */
-
-	return 0;
-}
-
-
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-	get_sys_info(&sysinfo);
-
-	printf("Board: esd CPCI-440\n");
-	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000);
-	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000);
-	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000);
-	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000);
-	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB/1000000);
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
-	return (0);
-}
-
-
-long int initdram (int board_type)
-{
-	long    dram_size = 0;
-
-	dram_size = fixed_sdram();
-	return dram_size;
-}
-
-
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- *
- *  Assumes:    64 MB, non-ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram( void )
-{
-	uint    reg;
-
-#if 1 /* test-only */
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram( mem_uabba, 0x00000000 );   /* ubba=0 (default)             */
-	mtsdram( mem_slio,  0x00000000 );   /* rdre=0 wrre=0 rarw=0         */
-	mtsdram( mem_devopt,0x00000000 );   /* dll=0 ds=0 (normal)          */
-	mtsdram( mem_wddctr,0x40000000 );   /* wrcp=0 dcd=0                 */
-	mtsdram( mem_clktr, 0x40000000 );   /* clkp=1 (90 deg wr) dcdt=0    */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/
-	mtsdram( mem_tr0,  0x410a4012 );/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
-	/* RA=10 RD=3                       */
-	mtsdram( mem_tr1,  0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
-	mtsdram( mem_rtr,  0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB     */
-	mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM    */
-	udelay( 400 );                  /* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit           */
-	for(;;)
-	{
-		mfsdram( mem_mcsts, reg );
-		if( reg & 0x80000000 )
-			break;
-	}
-
-	return( 64 * 1024 * 1024 );      /* 64 MB                           */
-#else
-	return( 32 * 1024 * 1024 );      /* 64 MB                           */
-#endif
-}
diff --git a/board/esd/cpci440/init.S b/board/esd/cpci440/init.S
deleted file mode 100644
index 82f37fd99..000000000
--- a/board/esd/cpci440/init.S
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-*  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X )
-    tlbtab_end
diff --git a/board/esd/cpci440/strataflash.c b/board/esd/cpci440/strataflash.c
deleted file mode 100644
index 2f055c20d..000000000
--- a/board/esd/cpci440/strataflash.c
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * (C) Copyright 2002
- * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-#undef  DEBUG_FLASH
-/*
- * This file implements a Common Flash Interface (CFI) driver for U-Boot.
- * The width of the port and the width of the chips are determined at initialization.
- * These widths are used to calculate the address for access CFI data structures.
- * It has been tested on an Intel Strataflash implementation.
- *
- * References
- * JEDEC Standard JESD68 - Common Flash Interface (CFI)
- * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
- * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
- * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
- *
- * TODO
- * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
- * Add support for other command sets Use the PRI and ALT to determine command set
- * Verify erase and program timeouts.
- */
-
-#define FLASH_CMD_CFI			0x98
-#define FLASH_CMD_READ_ID		0x90
-#define FLASH_CMD_RESET			0xff
-#define FLASH_CMD_BLOCK_ERASE		0x20
-#define FLASH_CMD_ERASE_CONFIRM		0xD0
-#define FLASH_CMD_WRITE			0x40
-#define FLASH_CMD_PROTECT		0x60
-#define FLASH_CMD_PROTECT_SET		0x01
-#define FLASH_CMD_PROTECT_CLEAR		0xD0
-#define FLASH_CMD_CLEAR_STATUS		0x50
-#define FLASH_CMD_WRITE_TO_BUFFER       0xE8
-#define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
-
-#define FLASH_STATUS_DONE		0x80
-#define FLASH_STATUS_ESS		0x40
-#define FLASH_STATUS_ECLBS		0x20
-#define FLASH_STATUS_PSLBS		0x10
-#define FLASH_STATUS_VPENS		0x08
-#define FLASH_STATUS_PSS		0x04
-#define FLASH_STATUS_DPS		0x02
-#define FLASH_STATUS_R			0x01
-#define FLASH_STATUS_PROTECT		0x01
-
-#define FLASH_OFFSET_CFI		0x55
-#define FLASH_OFFSET_CFI_RESP		0x10
-#define FLASH_OFFSET_WTOUT		0x1F
-#define FLASH_OFFSET_WBTOUT             0x20
-#define FLASH_OFFSET_ETOUT		0x21
-#define FLASH_OFFSET_CETOUT             0x22
-#define FLASH_OFFSET_WMAX_TOUT		0x23
-#define FLASH_OFFSET_WBMAX_TOUT         0x24
-#define FLASH_OFFSET_EMAX_TOUT		0x25
-#define FLASH_OFFSET_CEMAX_TOUT         0x26
-#define FLASH_OFFSET_SIZE		0x27
-#define FLASH_OFFSET_INTERFACE          0x28
-#define FLASH_OFFSET_BUFFER_SIZE        0x2A
-#define FLASH_OFFSET_NUM_ERASE_REGIONS	0x2C
-#define FLASH_OFFSET_ERASE_REGIONS	0x2D
-#define FLASH_OFFSET_PROTECT		0x02
-#define FLASH_OFFSET_USER_PROTECTION    0x85
-#define FLASH_OFFSET_INTEL_PROTECTION   0x81
-
-
-#define FLASH_MAN_CFI			0x01000000
-
-
-typedef union {
-	unsigned char c;
-	unsigned short w;
-	unsigned long l;
-} cfiword_t;
-
-typedef union {
-	unsigned char * cp;
-	unsigned short *wp;
-	unsigned long *lp;
-} cfiptr_t;
-
-#define NUM_ERASE_REGIONS 4
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_detect_cfi(flash_info_t * info);
-static ulong flash_get_size (ulong base, int banknum);
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
-#endif
-/*-----------------------------------------------------------------------
- * create an address based on the offset and the port width
- */
-inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
-{
-	return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
-}
-/*-----------------------------------------------------------------------
- * read a character at a port width address
- */
-inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
-{
-	uchar *cp;
-	cp = flash_make_addr(info, 0, offset);
-	return (cp[info->portwidth - 1]);
-}
-
-/*-----------------------------------------------------------------------
- * read a short word by swapping for ppc format.
- */
-ushort flash_read_ushort(flash_info_t * info, int sect,  uchar offset)
-{
-    uchar * addr;
-
-    addr = flash_make_addr(info, sect, offset);
-    return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- * read a long word by picking the least significant byte of each maiximum
- * port size word. Swap for ppc format.
- */
-ulong flash_read_long(flash_info_t * info, int sect,  uchar offset)
-{
-    uchar * addr;
-
-    addr = flash_make_addr(info, sect, offset);
-    return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
-	    (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	unsigned long size;
-	int i;
-	unsigned long  address;
-
-
-	/* The flash is positioned back to back, with the demultiplexing of the chip
-	 * based on the A24 address line.
-	 *
-	 */
-
-	address = CFG_FLASH_BASE;
-	size = 0;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		size += flash_info[i].size = flash_get_size(address, i);
-		address += CFG_FLASH_INCREMENT;
-		if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
-				flash_info[0].size, flash_info[i].size<<20);
-		}
-	}
-
-#if 0 /* test-only */
-	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+monitor_flash_len-1; i++)
-		(void)flash_real_protect(&flash_info[0], i, 1);
-#endif
-#endif
-
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int rcode = 0;
-	int prot;
-	int sect;
-
-	if( info->flash_id != FLASH_MAN_CFI) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-	if ((s_first < 0) || (s_first > s_last)) {
-		printf ("- no sectors to erase\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) { /* not protected */
-			flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
-			flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
-			flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
-
-			if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
-				rcode = 1;
-			} else
-				printf(".");
-		}
-	}
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id != FLASH_MAN_CFI) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	printf("CFI conformant FLASH (%d x %d)",
-	       (info->portwidth	 << 3 ), (info->chipwidth  << 3 ));
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-	printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
-	       info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n");
-		printf (" %08lX%5s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : " "
-			);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong wp;
-	ulong cp;
-	int aln;
-	cfiword_t cword;
-	int i, rc;
-
-	/* get lower aligned address */
-	wp = (addr & ~(info->portwidth - 1));
-
-	/* handle unaligned start */
-	if((aln = addr - wp) != 0) {
-		cword.l = 0;
-		cp = wp;
-		for(i=0;i<aln; ++i, ++cp)
-			flash_add_byte(info, &cword, (*(uchar *)cp));
-
-		for(; (i< info->portwidth) && (cnt > 0) ; i++) {
-			flash_add_byte(info, &cword, *src++);
-			cnt--;
-			cp++;
-		}
-		for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
-			flash_add_byte(info, &cword, (*(uchar *)cp));
-		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
-			return rc;
-		wp = cp;
-	}
-
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-	while(cnt >= info->portwidth) {
-		i = info->buffer_size > cnt? cnt: info->buffer_size;
-		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
-			return rc;
-		wp += i;
-		src += i;
-		cnt -=i;
-	}
-#else
-	/* handle the aligned part */
-	while(cnt >= info->portwidth) {
-		cword.l = 0;
-		for(i = 0; i < info->portwidth; i++) {
-			flash_add_byte(info, &cword, *src++);
-		}
-		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
-			return rc;
-		wp += info->portwidth;
-		cnt -= info->portwidth;
-	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	cword.l = 0;
-	for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
-		flash_add_byte(info, &cword, *src++);
-		--cnt;
-	}
-	for (; i<info->portwidth; ++i, ++cp) {
-		flash_add_byte(info, & cword, (*(uchar *)cp));
-	}
-
-	return flash_write_cfiword(info, wp, cword);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
-{
-	int retcode = 0;
-
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
-	if(prot)
-		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
-	else
-		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
-
-	if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
-					 prot?"protect":"unprotect")) == 0) {
-
-		info->protect[sector] = prot;
-		/* Intel's unprotect unprotects all locking */
-		if(prot == 0) {
-			int i;
-			for(i = 0 ; i<info->sector_count; i++) {
-				if(info->protect[i])
-					flash_real_protect(info, i, 1);
-			}
-		}
-	}
-
-	return retcode;
-}
-/*-----------------------------------------------------------------------
- *  wait for XSR.7 to be set. Time out with an error if it does not.
- *  This routine does not set the flash to read-array mode.
- */
-static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
-{
-	ulong start;
-
-	/* Wait for command completion */
-	start = get_timer (0);
-	while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
-		if (get_timer(start) > info->erase_blk_tout) {
-			printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
-			flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-			return ERR_TIMOUT;
-		}
-	}
-	return ERR_OK;
-}
-/*-----------------------------------------------------------------------
- * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
- * This routine sets the flash to read-array mode.
- */
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
-{
-	int retcode;
-	retcode = flash_status_check(info, sector, tout, prompt);
-	if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
-		retcode = ERR_INVAL;
-		printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
-		if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
-			printf("Command Sequence Error.\n");
-		} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
-			printf("Block Erase Error.\n");
-		        retcode = ERR_NOT_ERASED;
-		} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
-			printf("Locking Error\n");
-		}
-		if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
-			printf("Block locked.\n");
-			retcode = ERR_PROTECTED;
-		}
-		if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
-			printf("Vpp Low Error.\n");
-	}
-	flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-	return retcode;
-}
-/*-----------------------------------------------------------------------
- */
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
-{
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cword->c = c;
-		break;
-	case FLASH_CFI_16BIT:
-		cword->w = (cword->w << 8) | c;
-		break;
-	case FLASH_CFI_32BIT:
-		cword->l = (cword->l << 8) | c;
-	}
-}
-
-
-/*-----------------------------------------------------------------------
- * make a proper sized command based on the port and chip widths
- */
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
-{
-	int i;
-	uchar *cp = (uchar *)cmdbuf;
-	for(i=0; i< info->portwidth; i++)
-		*cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
-}
-
-/*
- * Write a proper sized command to the correct address
- */
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-
-	volatile cfiptr_t addr;
-	cfiword_t cword;
-	addr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		*addr.cp = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		*addr.wp = cword.w;
-		break;
-	case FLASH_CFI_32BIT:
-		*addr.lp = cword.l;
-		break;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-	cptr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = (cptr.cp[0] == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		retval = (cptr.wp[0] == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		retval = (cptr.lp[0] == cword.l);
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
-}
-/*-----------------------------------------------------------------------
- */
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-	cptr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		retval = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		retval = ((cptr.lp[0] & cword.l) == cword.l);
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
-}
-
-/*-----------------------------------------------------------------------
- * detect if flash is compatible with the Common Flash Interface (CFI)
- * http://www.jedec.org/download/search/jesd68.pdf
- *
- */
-static int flash_detect_cfi(flash_info_t * info)
-{
-
-	for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
-	    info->portwidth <<= 1) {
-		for(info->chipwidth =FLASH_CFI_BY8;
-		    info->chipwidth <= info->portwidth;
-		    info->chipwidth <<= 1) {
-			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-			flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
-			if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
-			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
-			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
-				return 1;
-		}
-	}
-	return 0;
-}
-/*
- * The following code cannot be run from FLASH!
- *
- */
-static ulong flash_get_size (ulong base, int banknum)
-{
-	flash_info_t * info = &flash_info[banknum];
-	int i, j;
-	int sect_cnt;
-	unsigned long sector;
-	unsigned long tmp;
-	int size_ratio;
-	uchar num_erase_regions;
-	int  erase_region_size;
-	int  erase_region_count;
-
-	info->start[0] = base;
-
-	if(flash_detect_cfi(info)){
-#ifdef DEBUG_FLASH
-		printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
-#endif
-		size_ratio = info->portwidth / info->chipwidth;
-		num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
-#ifdef DEBUG_FLASH
-		printf("found %d erase regions\n", num_erase_regions);
-#endif
-		sect_cnt = 0;
-		sector = base;
-		for(i = 0 ; i < num_erase_regions; i++) {
-			if(i > NUM_ERASE_REGIONS) {
-				printf("%d erase regions found, only %d used\n",
-				       num_erase_regions, NUM_ERASE_REGIONS);
-				break;
-			}
-			tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
-			erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
-			tmp >>= 16;
-			erase_region_count = (tmp & 0xffff) +1;
-			for(j = 0; j< erase_region_count; j++) {
-				info->start[sect_cnt] = sector;
-				sector += (erase_region_size * size_ratio);
-				info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
-				sect_cnt++;
-			}
-		}
-
-		info->sector_count = sect_cnt;
-		/* multiply the size by the number of chips */
-		info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
-		info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
-		info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
-		info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
-		info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
-		info->flash_id = FLASH_MAN_CFI;
-	}
-
-	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-	return(info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
-{
-
-	cfiptr_t ctladdr;
-	cfiptr_t cptr;
-	int flag;
-
-	ctladdr.cp = flash_make_addr(info, 0, 0);
-	cptr.cp = (uchar *)dest;
-
-
-	/* Check if Flash is (sufficiently) erased */
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		flag = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		flag = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		flag = ((cptr.lp[0] & cword.l)	== cword.l);
-		break;
-	default:
-		return 2;
-	}
-	if(!flag)
-		return 2;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
-
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cptr.cp[0] = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		cptr.wp[0] = cword.w;
-		break;
-	case FLASH_CFI_32BIT:
-		cptr.lp[0] = cword.l;
-		break;
-	}
-
-	/* re-enable interrupts if necessary */
-	if(flag)
-		enable_interrupts();
-
-	return flash_full_status_check(info, 0, info->write_tout, "write");
-}
-
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-
-/* loop through the sectors from the highest address
- * when the passed address is greater or equal to the sector address
- * we have a match
- */
-static int find_sector(flash_info_t *info, ulong addr)
-{
-	int sector;
-	for(sector = info->sector_count - 1; sector >= 0; sector--) {
-		if(addr >= info->start[sector])
-			break;
-	}
-	return sector;
-}
-
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
-{
-
-	int sector;
-	int cnt;
-	int retcode;
-	volatile cfiptr_t src;
-	volatile cfiptr_t dst;
-
-	src.cp = cp;
-	dst.cp = (uchar *)dest;
-	sector = find_sector(info, dest);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
-	if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
-					 "write to buffer")) == ERR_OK) {
-		switch(info->portwidth) {
-		case FLASH_CFI_8BIT:
-			cnt = len;
-			break;
-		case FLASH_CFI_16BIT:
-			cnt = len >> 1;
-			break;
-		case FLASH_CFI_32BIT:
-			cnt = len >> 2;
-			break;
-		default:
-			return ERR_INVAL;
-			break;
-		}
-		flash_write_cmd(info, sector, 0, (uchar)cnt-1);
-		while(cnt-- > 0) {
-			switch(info->portwidth) {
-			case FLASH_CFI_8BIT:
-				*dst.cp++ = *src.cp++;
-				break;
-			case FLASH_CFI_16BIT:
-				*dst.wp++ = *src.wp++;
-				break;
-			case FLASH_CFI_32BIT:
-				*dst.lp++ = *src.lp++;
-				break;
-			default:
-				return ERR_INVAL;
-				break;
-			}
-		}
-		flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
-		retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
-					     "buffer write");
-	}
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	return retcode;
-}
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
diff --git a/board/esd/cpciiser4/u-boot.lds b/board/esd/cpciiser4/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/cpciiser4/u-boot.lds
+++ b/board/esd/cpciiser4/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds
index fef5b5243..497177d97 100644
--- a/board/esd/dasa_sim/u-boot.lds
+++ b/board/esd/dasa_sim/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o		(.text)
     cpu/ppc4xx/traps.o		(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/iop480_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o		(.text)
     common/dlmalloc.o		(.text)
diff --git a/board/esd/dp405/u-boot.lds b/board/esd/dp405/u-boot.lds
index 43f776579..43fe6ca0b 100644
--- a/board/esd/dp405/u-boot.lds
+++ b/board/esd/dp405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/esd/du405/u-boot.lds b/board/esd/du405/u-boot.lds
index 1cf375fef..21c5044b2 100644
--- a/board/esd/du405/u-boot.lds
+++ b/board/esd/du405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/hh405/u-boot.lds b/board/esd/hh405/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/hh405/u-boot.lds
+++ b/board/esd/hh405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/hub405/u-boot.lds b/board/esd/hub405/u-boot.lds
index 98338e935..852e9ede8 100644
--- a/board/esd/hub405/u-boot.lds
+++ b/board/esd/hub405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c
index 4177f68ef..f83dfe870 100644
--- a/board/esd/ocrtc/cmd_ocrtc.c
+++ b/board/esd/ocrtc/cmd_ocrtc.c
@@ -25,7 +25,7 @@
 #include <command.h>
 #include <pci.h>
 #include <pci_ids.h>
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 
 
 #if defined(CONFIG_CMD_BSP)
diff --git a/board/esd/ocrtc/u-boot.lds b/board/esd/ocrtc/u-boot.lds
index 476b4a055..8ff25fa6e 100644
--- a/board/esd/ocrtc/u-boot.lds
+++ b/board/esd/ocrtc/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index 5b5ad8c44..9a0bf1e36 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -27,7 +27,7 @@
 #include <net.h>
 #include <asm/io.h>
 #include <pci.h>
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 #include <asm/processor.h>
 
 #include "pci405.h"
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index e5d2273f0..c4ab07200 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -26,7 +26,7 @@
 #include <command.h>
 #include <malloc.h>
 #include <pci.h>
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 
 #include "pci405.h"
 
diff --git a/board/esd/pci405/u-boot.lds b/board/esd/pci405/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/pci405/u-boot.lds
+++ b/board/esd/pci405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index f026a7ac3..57762b54e 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -109,8 +109,8 @@ int misc_init_f (void)
 
 int misc_init_r (void)
 {
-	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
 	int status;
@@ -184,16 +184,28 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Setup EEPROM write protection
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+
+	/*
 	 * Enable interrupts in exar duart mcr[3]
 	 */
-	*duart0_mcr = 0x08;
-	*duart1_mcr = 0x08;
+	out_8(duart0_mcr, 0x08);
+	out_8(duart1_mcr, 0x08);
 
 	return (0);
 }
@@ -259,3 +271,74 @@ void reset_phy(void)
 	lxt971_no_sleep();
 #endif
 }
+
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *	               0: disable write
+ *		       1: enable write
+ *  Returns:           -1: wrong device address
+ *                      0: dis-/en- able done
+ *		     0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+			break;
+		}
+	}
+	return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		if (state < 0) {
+			puts ("Query of write access state failed.\n");
+		} else {
+			printf ("Write access for device 0x%0x is %sabled.\n",
+				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0) {
+			puts ("Setup of write access state failed.\n");
+		}
+	}
+
+	return state;
+}
+
+U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
+	   "eepwren - Enable / disable / query EEPROM write access\n",
+	   NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */
diff --git a/board/esd/plu405/u-boot.lds b/board/esd/plu405/u-boot.lds
index 43f776579..43fe6ca0b 100644
--- a/board/esd/plu405/u-boot.lds
+++ b/board/esd/plu405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/esd/pmc405/u-boot.lds b/board/esd/pmc405/u-boot.lds
index e84d69ebb..898963c98 100644
--- a/board/esd/pmc405/u-boot.lds
+++ b/board/esd/pmc405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/cpci440/Makefile b/board/esd/pmc440/Makefile
index d13d31c97..4dd9c386c 100644
--- a/board/esd/cpci440/Makefile
+++ b/board/esd/pmc440/Makefile
@@ -22,13 +22,12 @@
 #
 
 include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o strataflash.o ../common/misc.o
+COBJS	= $(BOARD).o cmd_pmc440.o sdram.o fpga.o \
+	../common/cmd_loadpci.o
+
 SOBJS	= init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
@@ -36,7 +35,7 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
new file mode 100644
index 000000000..d588d8ca9
--- /dev/null
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -0,0 +1,558 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/processor.h>
+
+#include "pmc440.h"
+
+int is_monarch(void);
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+int eeprom_write_enable(unsigned dev_addr, int state);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_BSP)
+
+static int got_fifoirq;
+static int got_hcirq;
+
+int fpga_interrupt(u32 arg)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)arg;
+	int rc = -1; /* not for us */
+	u32 status = FPGA_IN32(&fpga->status);
+
+	/* check for interrupt from fifo module */
+	if (status & STATUS_FIFO_ISF) {
+		/* disable this int source */
+		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
+		rc = 0;
+		got_fifoirq = 1; /* trigger backend */
+	}
+
+	if (status & STATUS_HOST_ISF) {
+		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
+		rc = 0;
+		got_hcirq = 1;
+	}
+
+	return rc;
+}
+
+
+int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	got_hcirq = 0;
+
+	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
+	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
+
+	irq_install_handler(IRQ0_FPGA,
+			    (interrupt_handler_t *)fpga_interrupt,
+			    fpga);
+
+	FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE);
+
+	while (!got_hcirq) {
+		/* Abort if ctrl-c was pressed */
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			break;
+		}
+	}
+	if (got_hcirq)
+		printf("Got interrupt!\n");
+
+	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
+	irq_free_handler(IRQ0_FPGA);
+	return 0;
+}
+U_BOOT_CMD(
+	waithci,	1,	1,	do_waithci,
+	"waithci - Wait for host control interrupt\n",
+	NULL
+	);
+
+
+void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
+{
+	u32 ctrl;
+
+	while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) {
+		printf("%5d  %d    %3d  %08x",
+		       (*n)++, f, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
+		       FPGA_IN32(&fpga->fifo[f].data));
+		if (ctrl & FIFO_OVERFLOW) {
+			printf(" OVERFLOW\n");
+			FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW);
+		} else
+			printf("\n");
+	}
+}
+
+
+int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+	int i;
+	int n = 0;
+	u32 ctrl, data, f;
+	char str[] = "\\|/-";
+	int abort = 0;
+	int count = 0;
+	int count2 = 0;
+
+	switch (argc) {
+	case 1:
+		/* print all fifos status information */
+		printf("fifo level status\n");
+		printf("______________________________\n");
+		for (i=0; i<FIFO_COUNT; i++) {
+			ctrl = FPGA_IN32(&fpga->fifo[i].ctrl);
+			printf(" %d    %3d  %s%s%s %s\n",
+			       i, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
+			       ctrl & FIFO_FULL ? "FULL     " : "",
+			       ctrl & FIFO_EMPTY ? "EMPTY    " : "",
+			       ctrl & (FIFO_FULL|FIFO_EMPTY) ? "" : "NOT EMPTY",
+			       ctrl & FIFO_OVERFLOW ? "OVERFLOW" : "");
+		}
+		break;
+
+	case 2:
+		/* completely read out fifo 'n' */
+		if (!strcmp(argv[1],"read")) {
+			printf("  #   fifo level data\n");
+			printf("______________________________\n");
+
+			for (i=0; i<FIFO_COUNT; i++)
+				dump_fifo(fpga, i, &n);
+
+		} else if (!strcmp(argv[1],"wait")) {
+			got_fifoirq = 0;
+
+			irq_install_handler(IRQ0_FPGA,
+					    (interrupt_handler_t *)fpga_interrupt,
+					    fpga);
+
+			printf("  #   fifo level data\n");
+			printf("______________________________\n");
+
+			/* enable all fifo interrupts */
+			FPGA_OUT32(&fpga->hostctrl,
+				   HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
+			for (i=0; i<FIFO_COUNT; i++) {
+				/* enable interrupts from all fifos */
+				FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE);
+			}
+
+			while (1) {
+				/* wait loop */
+				while (!got_fifoirq) {
+					count++;
+					if (!(count % 100)) {
+						count2++;
+						putc(0x08); /* backspace */
+						putc(str[count2 % 4]);
+					}
+
+					/* Abort if ctrl-c was pressed */
+					if ((abort = ctrlc())) {
+						puts("\nAbort\n");
+						break;
+					}
+					udelay(1000);
+				}
+				if (abort)
+					break;
+
+				/* simple fifo backend */
+				if (got_fifoirq) {
+					for (i=0; i<FIFO_COUNT; i++)
+						dump_fifo(fpga, i, &n);
+
+					got_fifoirq = 0;
+					/* unmask global fifo irq */
+					FPGA_OUT32(&fpga->hostctrl,
+						   HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
+				}
+			}
+
+			/* disable all fifo interrupts */
+			FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
+			for (i=0; i<FIFO_COUNT; i++)
+				FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE);
+
+			irq_free_handler(IRQ0_FPGA);
+
+		} else {
+			printf("Usage:\nfifo %s\n", cmdtp->help);
+			return 1;
+		}
+		break;
+
+	case 4:
+	case 5:
+		if (!strcmp(argv[1],"write")) {
+			/* get fifo number or fifo address */
+			f = simple_strtoul(argv[2], NULL, 16);
+
+			/* data paramter */
+			data = simple_strtoul(argv[3], NULL, 16);
+
+			/* get optional count parameter */
+			n = 1;
+			if (argc >= 5)
+				n = (int)simple_strtoul(argv[4], NULL, 10);
+
+			if (f < FIFO_COUNT) {
+				printf("writing %d x %08x to fifo %d\n",
+				       n, data, f);
+				for (i=0; i<n; i++)
+					FPGA_OUT32(&fpga->fifo[f].data, data);
+			} else {
+				printf("writing %d x %08x to fifo port at address %08x\n",
+				       n, data, f);
+				for (i=0; i<n; i++)
+					out32(f, data);
+			}
+		} else {
+			printf("Usage:\nfifo %s\n", cmdtp->help);
+			return 1;
+		}
+		break;
+
+	default:
+		printf("Usage:\nfifo %s\n", cmdtp->help);
+		return 1;
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	fifo,	5,	1,	do_fifo,
+	"fifo    - Fifo module operations\n",
+	"wait\nfifo read\n"
+	"fifo write fifo(0..3) data [cnt=1]\n"
+	"fifo write address(>=4) data [cnt=1]\n"
+	"  - without arguments: print all fifo's status\n"
+	"  - with 'wait' argument: interrupt driven read from all fifos\n"
+	"  - with 'read' argument: read current contents from all fifos\n"
+	"  - with 'write' argument: write 'data' 'cnt' times to 'fifo' or 'address'\n"
+	);
+
+
+int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong sdsdp[5];
+	ulong delay;
+	int count=16;
+
+	if (argc < 2) {
+		printf("Usage:\nsbe %s\n", cmdtp->help);
+		return -1;
+	}
+
+	if (argc > 1) {
+		if (!strcmp(argv[1], "400")) {
+			/* PLB=133MHz, PLB/PCI=4 */
+			printf("Bootstrapping for 400MHz\n");
+			sdsdp[0]=0x8678624e;
+			sdsdp[1]=0x0947a030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else if (!strcmp(argv[1], "533")) {
+			/* PLB=133MHz, PLB/PCI=3 */
+			printf("Bootstrapping for 533MHz\n");
+			sdsdp[0]=0x87788252;
+			sdsdp[1]=0x095fa030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else if (!strcmp(argv[1], "667")) {
+			/* PLB=133MHz, PLB/PCI=4 */
+			printf("Bootstrapping for 667MHz\n");
+			sdsdp[0]=0x8778a256;
+			sdsdp[1]=0x0947a030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else if (!strcmp(argv[1], "test")) {
+			/* TODO: this will replace the 667 MHz config above.
+			 * But it needs some more testing on a real 667 MHz CPU.
+			 */
+			printf("Bootstrapping for test (667MHz PLB=133PLB PLB/PCI=3)\n");
+			sdsdp[0]=0x8778a256;
+			sdsdp[1]=0x095fa030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else {
+			printf("Usage:\nsbe %s\n", cmdtp->help);
+			return -1;
+		}
+	}
+
+	if (argc > 2) {
+		sdsdp[4] = 0;
+		if (argv[2][0]=='1')
+			sdsdp[4]=0x19750100;
+		else if (argv[2][0]=='0')
+			sdsdp[4]=0x19750000;
+		if (sdsdp[4])
+			count += 4;
+	}
+
+	if (argc > 3) {
+		delay = simple_strtoul(argv[3], NULL, 10);
+		if (delay > 20)
+			delay = 20;
+		sdsdp[4] |= delay;
+	}
+
+	printf("Writing boot EEPROM ...\n");
+	if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+				   0, (uchar*)sdsdp, count) != 0)
+		printf("bootstrap_eeprom_write failed\n");
+	else
+		printf("done (dump via 'i2c md 52 0.1 14')\n");
+
+	return 0;
+}
+U_BOOT_CMD(
+	sbe, 4, 0, do_setup_bootstrap_eeprom,
+	"sbe     - setup bootstrap eeprom\n",
+	"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
+	);
+
+
+#if defined(CONFIG_PRAM)
+#include <environment.h>
+extern env_t *env_ptr;
+
+int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u32 memsize;
+	u32 pram, env_base;
+	char *v;
+	u32 param;
+	ulong *lptr;
+
+	memsize = gd->bd->bi_memsize;
+
+	v = getenv("pram");
+	if (v)
+		pram = simple_strtoul(v, NULL, 10);
+	else {
+		printf("Error: pram undefined. Please define pram in KiB\n");
+		return 1;
+	}
+
+	param = memsize - (pram << 10);
+	printf("PARAM: @%08x\n", param);
+
+	memset((void*)param, 0, (pram << 10));
+	env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1));
+	memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE);
+
+	lptr = (ulong*)memsize;
+	*(--lptr) = CFG_ENV_SIZE;
+	*(--lptr) = memsize - env_base;
+	*(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08);
+	*(--lptr) = 0;
+
+	/* make sure data can be accessed through PCI */
+	flush_dcache_range(param, param + (pram << 10) - 1);
+	return 0;
+}
+U_BOOT_CMD(
+	painit,	1,	1,	do_painit,
+	"painit  - prepare PciAccess system\n",
+	NULL
+	);
+#endif /* CONFIG_PRAM */
+
+
+int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("self-reset# asserted\n");
+			out_be32((void*)GPIO0_TCR,
+				 in_be32((void*)GPIO0_TCR) | GPIO0_SELF_RST);
+		} else {
+			/* deassert */
+			printf("self-reset# deasserted\n");
+			out_be32((void*)GPIO0_TCR,
+				 in_be32((void*)GPIO0_TCR) & ~GPIO0_SELF_RST);
+		}
+	} else {
+		printf("self-reset# is %s\n",
+		       in_be32((void*)GPIO0_TCR) & GPIO0_SELF_RST ?
+		       "active" : "inactive");
+	}
+
+	return 0;
+}
+U_BOOT_CMD(
+	selfreset,	2,	1,	do_selfreset,
+	"selfreset- assert self-reset# signal\n",
+	NULL
+	);
+
+
+int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	/* requiers bootet FPGA and PLD_IOEN_N active */
+	if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) {
+		printf("Error: resetout requires a bootet FPGA\n");
+		return -1;
+	}
+
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("PMC-RESETOUT# asserted\n");
+			FPGA_OUT32(&fpga->hostctrl,
+				   HOSTCTRL_PMCRSTOUT_GATE);
+		} else {
+			/* deassert */
+			printf("PMC-RESETOUT# deasserted\n");
+			FPGA_OUT32(&fpga->hostctrl,
+				   HOSTCTRL_PMCRSTOUT_GATE | HOSTCTRL_PMCRSTOUT_FLAG);
+		}
+	} else {
+		printf("PMC-RESETOUT# is %s\n",
+		       FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ?
+		       "inactive" : "active");
+	}
+
+	return 0;
+}
+U_BOOT_CMD(
+	resetout,	2,	1,	do_resetout,
+	"resetout - assert PMC-RESETOUT# signal\n",
+	NULL
+	);
+
+
+int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	if (is_monarch()) {
+		printf("This command is only supported in non-monarch mode\n");
+		return -1;
+	}
+
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("inta# asserted\n");
+			out_be32((void*)GPIO1_TCR,
+				 in_be32((void*)GPIO1_TCR) | GPIO1_INTA_FAKE);
+		} else {
+			/* deassert */
+			printf("inta# deasserted\n");
+			out_be32((void*)GPIO1_TCR,
+				 in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
+		}
+	} else {
+		printf("inta# is %s\n", in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? "active" : "inactive");
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	inta,	2,	1,	do_inta,
+	"inta    - Assert/Deassert or query INTA# state in non-monarch mode\n",
+	NULL
+	);
+
+
+/* test-only */
+int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong pciaddr;
+
+	if (argc > 1) {
+		pciaddr = simple_strtoul(argv[1], NULL, 16);
+
+		pciaddr &= 0xf0000000;
+
+		/* map PCI address at 0xc0000000 in PLB space */
+		out32r(PCIX0_PMM1MA, 0x00000000); /* PMM1 Mask/Attribute - disabled b4 setting */
+		out32r(PCIX0_PMM1LA, 0xc0000000); /* PMM1 Local Address */
+		out32r(PCIX0_PMM1PCILA, pciaddr); /* PMM1 PCI Low Address */
+		out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM1 PCI High Address */
+		out32r(PCIX0_PMM1MA, 0xf0000001); /* 256MB + No prefetching, and enable region */
+	} else {
+		printf("Usage:\npmm %s\n", cmdtp->help);
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	pmm,	2,	1,	do_pmm,
+	"pmm     - Setup pmm[1] registers\n",
+	"<pciaddr> (pciaddr will be aligned to 256MB)\n"
+	);
+
+#if defined(CFG_EEPROM_WREN)
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+		if (state < 0) {
+			puts("Query of write access state failed.\n");
+		} else {
+			printf("Write access for device 0x%0x is %sabled.\n",
+			       CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0) {
+			puts("Setup of write access state failed.\n");
+		}
+	}
+
+	return state;
+}
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+	   "eepwren - Enable / disable / query EEPROM write access\n",
+	   NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+#endif /* CONFIG_CMD_BSP */
diff --git a/board/esd/cpci440/config.mk b/board/esd/pmc440/config.mk
index 8e5f63fe4..e62b8d30e 100644
--- a/board/esd/cpci440/config.mk
+++ b/board/esd/pmc440/config.mk
@@ -20,18 +20,14 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-
 #
-# esd ADCIOP boards
+# AMCC 440EPx Reference Platform (Sequoia) board
 #
 
-#TEXT_BASE = 0xFFFE0000
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
-else
-TEXT_BASE = 0xFFFC0000
-#TEXT_BASE = 0x01fc0000
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
diff --git a/board/esd/pmc440/fpga.c b/board/esd/pmc440/fpga.c
new file mode 100644
index 000000000..a35f42bd5
--- /dev/null
+++ b/board/esd/pmc440/fpga.c
@@ -0,0 +1,461 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <spartan2.h>
+#include <spartan3.h>
+#include <command.h>
+#include "fpga.h"
+#include "pmc440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_FPGA)
+
+#define USE_SP_CODE
+
+#ifdef USE_SP_CODE
+Xilinx_Spartan3_Slave_Parallel_fns pmc440_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_init_fn,
+	NULL, /* err */
+	fpga_done_fn,
+	fpga_clk_fn,
+	fpga_cs_fn,
+	fpga_wr_fn,
+	NULL, /* rdata */
+	fpga_wdata_fn,
+	fpga_busy_fn,
+	fpga_abort_fn,
+	fpga_post_config_fn,
+};
+#else
+Xilinx_Spartan3_Slave_Serial_fns pmc440_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+#endif
+
+Xilinx_Spartan2_Slave_Serial_fns ngcc_fpga_fns = {
+	ngcc_fpga_pre_config_fn,
+	ngcc_fpga_pgm_fn,
+	ngcc_fpga_clk_fn,
+	ngcc_fpga_init_fn,
+	ngcc_fpga_done_fn,
+	ngcc_fpga_wr_fn,
+	ngcc_fpga_post_config_fn
+};
+
+Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
+	XILINX_XC3S1200E_DESC(
+#ifdef USE_SP_CODE
+		slave_parallel,
+#else
+		slave_serial,
+#endif
+		(void *)&pmc440_fpga_fns,
+		0),
+	XILINX_XC2S200_DESC(
+		slave_serial,
+		(void *)&ngcc_fpga_fns,
+		0)
+};
+
+
+/*
+ * Set the active-low FPGA reset signal.
+ */
+void fpga_reset(int assert)
+{
+	debug("%s:%d: RESET ", __FUNCTION__, __LINE__);
+	if (assert) {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA);
+		debug("asserted\n");
+	} else {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA);
+		debug("deasserted\n");
+	}
+}
+
+
+/*
+ * Initialize the SelectMap interface.  We assume that the mode and the
+ * initial state of all of the port pins have already been set!
+ */
+void fpga_serialslave_init(void)
+{
+	debug("%s:%d: Initialize serial slave interface\n", __FUNCTION__,
+	      __LINE__);
+	fpga_pgm_fn(FALSE, FALSE, 0);	/* make sure program pin is inactive */
+}
+
+
+/*
+ * Set the FPGA's active-low SelectMap program line to the specified level
+ */
+int fpga_pgm_fn(int assert, int flush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM ",
+	      __FUNCTION__, __LINE__);
+
+	if (assert) {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_PRG);
+		debug("asserted\n");
+	} else {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_PRG);
+		debug("deasserted\n");
+	}
+	return assert;
+}
+
+
+/*
+ * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
+ * asserted (low).
+ */
+int fpga_init_fn(int cookie)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_INIT)
+		return 0;
+	else
+		return 1;
+}
+
+#ifdef USE_SP_CODE
+int fpga_abort_fn(int cookie)
+{
+	return 0;
+}
+
+
+int fpga_cs_fn(int assert_cs, int flush, int cookie)
+{
+	return assert_cs;
+}
+
+
+int fpga_busy_fn(int cookie)
+{
+	return 1;
+}
+#endif
+
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+int fpga_done_fn(int cookie)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_DONE)
+		return 1;
+	else
+		return 0;
+}
+
+
+/*
+ * FPGA pre-configuration function. Just make sure that
+ * FPGA reset is asserted to keep the FPGA from starting up after
+ * configuration.
+ */
+int fpga_pre_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
+	fpga_reset(TRUE);
+
+	/* release init# */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | GPIO0_FPGA_FORCEINIT);
+	/* disable PLD IOs */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_IOEN_N);
+	return 0;
+}
+
+
+/*
+ * FPGA post configuration function. Blip the FPGA reset line and then see if
+ * the FPGA appears to be running.
+ */
+int fpga_post_config_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+	int rc=0;
+	char *s;
+
+	debug("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__);
+
+	/* enable PLD0..7 pins */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_IOEN_N);
+
+	fpga_reset(TRUE);
+	udelay (100);
+	fpga_reset(FALSE);
+	udelay (100);
+
+	FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK);
+
+	/* NGCC only: enable ledlink */
+	if ((s = getenv("bd_type")) && !strcmp(s, "ngcc"))
+		FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
+
+	return rc;
+}
+
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	if (assert_clk)
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_CLK);
+	else
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_CLK);
+
+	return assert_clk;
+}
+
+
+int fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+	if (assert_write)
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA);
+	else
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA);
+
+	return assert_write;
+}
+
+#ifdef USE_SP_CODE
+int fpga_wdata_fn(uchar data, int flush, int cookie)
+{
+	uchar val = data;
+	ulong or = in_be32((void*)GPIO1_OR);
+	int i = 7;
+	do {
+		/* Write data */
+		if (val & 0x80)
+			or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA;
+		else
+			or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA);
+
+		out_be32((void*)GPIO1_OR, or);
+
+		/* Assert the clock */
+		or |= GPIO1_FPGA_CLK;
+		out_be32((void*)GPIO1_OR, or);
+		val <<= 1;
+		i --;
+	} while (i > 0);
+
+	/* Write last data bit (the 8th clock comes from the sp_load() code */
+	if (val & 0x80)
+		or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA;
+	else
+		or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA);
+
+	out_be32((void*)GPIO1_OR, or);
+
+	return 0;
+}
+#endif
+
+#define NGCC_FPGA_PRG  CLOCK_EN
+#define NGCC_FPGA_DATA RESET_OUT
+#define NGCC_FPGA_DONE CLOCK_IN
+#define NGCC_FPGA_INIT IRIGB_R_IN
+#define NGCC_FPGA_CLK  CLOCK_OUT
+
+void ngcc_fpga_serialslave_init(void)
+{
+	debug("%s:%d: Initialize serial slave interface\n",
+	      __FUNCTION__, __LINE__);
+
+	/* make sure program pin is inactive */
+	ngcc_fpga_pgm_fn (FALSE, FALSE, 0);
+}
+
+/*
+ * Set the active-low FPGA reset signal.
+ */
+void ngcc_fpga_reset(int assert)
+{
+	debug("%s:%d: RESET ", __FUNCTION__, __LINE__);
+
+	if (assert) {
+		FPGA_CLRBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N);
+		debug("asserted\n");
+	} else {
+		FPGA_SETBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N);
+		debug("deasserted\n");
+	}
+}
+
+
+/*
+ * Set the FPGA's active-low SelectMap program line to the specified level
+ */
+int ngcc_fpga_pgm_fn(int assert, int flush, int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: FPGA PROGRAM ", __FUNCTION__, __LINE__);
+
+	if (assert) {
+		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_PRG);
+		debug("asserted\n");
+	} else {
+		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_PRG);
+		debug("deasserted\n");
+	}
+
+	return assert;
+}
+
+
+/*
+ * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
+ * asserted (low).
+ */
+int ngcc_fpga_init_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: INIT check... ", __FUNCTION__, __LINE__);
+	if (FPGA_IN32(&fpga->status) & NGCC_FPGA_INIT) {
+		debug("high\n");
+		return 0;
+	} else {
+		debug("low\n");
+		return 1;
+	}
+}
+
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+int ngcc_fpga_done_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: DONE check... ", __FUNCTION__, __LINE__);
+	if (FPGA_IN32(&fpga->status) & NGCC_FPGA_DONE) {
+		debug("DONE high\n");
+		return 1;
+	} else {
+		debug("low\n");
+		return 0;
+	}
+}
+
+
+/*
+ * FPGA pre-configuration function.
+ */
+int ngcc_fpga_pre_config_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
+
+	ngcc_fpga_reset(TRUE);
+	FPGA_CLRBITS(&fpga->ctrla, 0xfffffe00);
+
+	ngcc_fpga_reset(TRUE);
+	return 0;
+}
+
+
+/*
+ * FPGA post configuration function. Blip the FPGA reset line and then see if
+ * the FPGA appears to be running.
+ */
+int ngcc_fpga_post_config_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: NGCC FPGA post configuration\n", __FUNCTION__, __LINE__);
+
+	udelay (100);
+	ngcc_fpga_reset(FALSE);
+
+	FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
+
+	return 0;
+}
+
+
+int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	if (assert_clk)
+		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_CLK);
+	else
+		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_CLK);
+
+	return assert_clk;
+}
+
+
+int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	if (assert_write)
+		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_DATA);
+	else
+		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_DATA);
+
+	return assert_write;
+}
+
+
+/*
+ * Initialize the fpga.  Return 1 on success, 0 on failure.
+ */
+int pmc440_init_fpga(void)
+{
+	char *s;
+
+	debug("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n",
+	      __FUNCTION__, __LINE__, gd->reloc_off);
+	fpga_init(gd->reloc_off);
+
+	fpga_serialslave_init ();
+	debug("%s:%d: Adding fpga 0\n", __FUNCTION__, __LINE__);
+	fpga_add (fpga_xilinx, &fpga[0]);
+
+	/* NGCC only */
+	if ((s = getenv("bd_type")) && !strcmp(s, "ngcc")) {
+		ngcc_fpga_serialslave_init ();
+		debug("%s:%d: Adding fpga 1\n", __FUNCTION__, __LINE__);
+		fpga_add (fpga_xilinx, &fpga[1]);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_FPGA */
diff --git a/board/esd/pmc440/fpga.h b/board/esd/pmc440/fpga.h
new file mode 100644
index 000000000..d61a3cfad
--- /dev/null
+++ b/board/esd/pmc440/fpga.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+extern int pmc440_init_fpga(void);
+
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_init_fn(int cookie);
+extern int fpga_err_fn(int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_cs_fn(int assert_cs, int flush, int cookie);
+extern int fpga_wr_fn(int assert_write, int flush, int cookie);
+extern int fpga_wdata_fn (uchar data, int flush, int cookie);
+extern int fpga_read_data_fn(unsigned char *data, int cookie);
+extern int fpga_write_data_fn(unsigned char data, int flush, int cookie);
+extern int fpga_busy_fn(int cookie);
+extern int fpga_abort_fn(int cookie );
+extern int fpga_pre_config_fn(int cookie );
+extern int fpga_post_config_fn(int cookie );
+
+extern int ngcc_fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int ngcc_fpga_init_fn(int cookie);
+extern int ngcc_fpga_done_fn(int cookie);
+extern int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie);
+extern int ngcc_fpga_pre_config_fn(int cookie );
+extern int ngcc_fpga_post_config_fn(int cookie );
diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S
new file mode 100644
index 000000000..148af71bb
--- /dev/null
+++ b/board/esd/pmc440/init.S
@@ -0,0 +1,122 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
+#include <config.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+#ifndef CONFIG_NAND_SPL
+	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+#else
+	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+	/* TLB-entry for DDR SDRAM (Up to 2GB) */
+#ifdef CONFIG_4xx_DCACHE
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+#else
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#endif
+
+#ifdef CFG_INIT_RAM_DCACHE
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+	/* TLB-entry for PCI Memory */
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+	/* TLB-entries for EBC */
+	/* PMC440 maps EBC to 0xef000000 which is handled by the peripheral
+	 * tlb entry.
+	 * This dummy entry is only for convinience in order not to modify the
+	 * amount of entries. Currently OS/9 relies on this :-)
+	 */
+	tlbentry( 0xc0000000, SZ_256M, 0xc0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for NAND */
+	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for Internal Registers & OCM */
+	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
+
+	/*TLB-entry PCI registers*/
+	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for peripherals */
+	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	/* TLB-entry PCI IO space */
+	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	/* TODO:  what about high IO space */
+	tlbtab_end
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+	/*
+	 * For NAND booting the first TLB has to be reconfigured to full size
+	 * and with caching disabled after running from RAM!
+	 */
+#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	.globl	reconfig_tlb0
+reconfig_tlb0:
+	sync
+	isync
+	addi	r4,r0,0x0000		/* TLB entry #0 */
+	lis	r5,TLB00@h
+	ori	r5,r5,TLB00@l
+	tlbwe	r5,r4,0x0000		/* Save it out */
+	lis	r5,TLB01@h
+	ori	r5,r5,TLB01@l
+	tlbwe	r5,r4,0x0001		/* Save it out */
+	lis	r5,TLB02@h
+	ori	r5,r5,TLB02@l
+	tlbwe	r5,r4,0x0002		/* Save it out */
+	sync
+	isync
+	blr
+#endif
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
new file mode 100644
index 000000000..edf3a140b
--- /dev/null
+++ b/board/esd/pmc440/pmc440.c
@@ -0,0 +1,898 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ * Based on board/amcc/sequoia/sequoia.c
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <ppc440.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <command.h>
+#include <i2c.h>
+#ifdef CONFIG_RESET_PHY_R
+#include <miiphy.h>
+#endif
+#include <serial.h>
+#include "fpga.h"
+#include "pmc440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+ulong flash_get_size(ulong base, int banknum);
+int pci_is_66mhz(void);
+int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+
+
+struct serial_device *default_serial_console(void)
+{
+	uchar buf[4];
+	ulong delay;
+	int i;
+	ulong val;
+
+	/*
+	 * Use default console on P4 when strapping jumper
+	 * is installed (bootstrap option != 'H').
+	 */
+	mfsdr(SDR_PINSTP, val);
+	if (((val & 0xf0000000) >> 29) != 7)
+		return &serial1_device;
+
+	ulong scratchreg = in_be32((void*)GPIO0_ISR3L);
+	if (!(scratchreg & 0x80)) {
+		/* mark scratchreg valid */
+		scratchreg = (scratchreg & 0xffffff00) | 0x80;
+
+		i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4);
+		if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
+			scratchreg |= buf[2];
+
+			/* bringup delay for console */
+			for (delay=0; delay<(1000 * (ulong)buf[3]); delay++) {
+				udelay(1000);
+			}
+		} else
+			scratchreg |= 0x01;
+		out_be32((void*)GPIO0_ISR3L, scratchreg);
+	}
+
+	if (scratchreg & 0x01)
+		return &serial1_device;
+	else
+		return &serial0_device;
+}
+
+int board_early_init_f(void)
+{
+	u32 sdr0_cust0;
+	u32 sdr0_pfc1, sdr0_pfc2;
+	u32 reg;
+
+	/* general EBC configuration (disable EBC timeouts) */
+	mtdcr(ebccfga, xbcfg);
+	mtdcr(ebccfgd, 0xf8400000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the GPIO pins
+	 * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
+	 *-------------------------------------------------------------------*/
+	out32(GPIO0_OR,    0x40000002);
+	out32(GPIO0_TCR,   0x4c90011f);
+	out32(GPIO0_OSRL,  0x28011400);
+	out32(GPIO0_OSRH,  0x55005000);
+	out32(GPIO0_TSRL,  0x08011400);
+	out32(GPIO0_TSRH,  0x55005000);
+	out32(GPIO0_ISR1L, 0x54000000);
+	out32(GPIO0_ISR1H, 0x00000000);
+	out32(GPIO0_ISR2L, 0x44000000);
+	out32(GPIO0_ISR2H, 0x00000100);
+	out32(GPIO0_ISR3L, 0x00000000);
+	out32(GPIO0_ISR3H, 0x00000000);
+
+	out32(GPIO1_OR,    0x80002408);
+	out32(GPIO1_TCR,   0xd6003c08);
+	out32(GPIO1_OSRL,  0x0a5a0000);
+	out32(GPIO1_OSRH,  0x00000000);
+	out32(GPIO1_TSRL,  0x00000000);
+	out32(GPIO1_TSRH,  0x00000000);
+	out32(GPIO1_ISR1L, 0x00005555);
+	out32(GPIO1_ISR1H, 0x40000000);
+	out32(GPIO1_ISR2L, 0x04010000);
+	out32(GPIO1_ISR2H, 0x00000000);
+	out32(GPIO1_ISR3L, 0x01400000);
+	out32(GPIO1_ISR3H, 0x00000000);
+
+	/* patch PLB:PCI divider for 66MHz PCI */
+	mfcpr(clk_spcid, reg);
+	if (pci_is_66mhz() && (reg != 0x02000000)) {
+		mtcpr(clk_spcid, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
+
+		mfcpr(clk_icfg, reg);
+		reg |= CPR0_ICFG_RLI_MASK;
+		mtcpr(clk_icfg, reg);
+
+		mtspr(dbcr0, 0x20000000); /* do chip reset */
+	}
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffff7ef);
+	mtdcr(uic0tr, 0x00000000);
+	mtdcr(uic0vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffc7f5);
+	mtdcr(uic1tr, 0x00000000);
+	mtdcr(uic1vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+	mtdcr(uic2er, 0x00000000);	/* disable all */
+	mtdcr(uic2cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic2pr, 0x27ffffff);
+	mtdcr(uic2tr, 0x00000000);
+	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+
+	/* select Ethernet pins */
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+	mfsdr(SDR0_PFC2, sdr0_pfc2);
+	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+
+	/* enable 2nd IIC */
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
+
+	mtsdr(SDR0_PFC2, sdr0_pfc2);
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+	/* setup NAND FLASH */
+	mfsdr(SDR0_CUST0, sdr0_cust0);
+	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
+		SDR0_CUST0_NDFC_ENABLE		|
+		SDR0_CUST0_NDFC_BW_8_BIT	|
+		SDR0_CUST0_NDFC_ARE_MASK	|
+		(0x80000000 >> (28 + CFG_NAND_CS));
+	mtsdr(SDR0_CUST0, sdr0_cust0);
+
+	return 0;
+}
+
+/*---------------------------------------------------------------------------+
+  | misc_init_r.
+  +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+	uint pbcr;
+	int size_val = 0;
+	u32 reg;
+	unsigned long usb2d0cr = 0;
+	unsigned long usb2phy0cr, usb2h0cr = 0;
+	unsigned long sdr0_pfc1;
+	char *act = getenv("usbact");
+
+	/*
+	 * FLASH stuff...
+	 */
+
+	/* Re-do sizing to get full correct info */
+
+	/* adjust flash start and offset */
+	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+	gd->bd->bi_flashoffset = 0;
+
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+	mtdcr(ebccfga, pb2cr);
+#else
+	mtdcr(ebccfga, pb0cr);
+#endif
+	pbcr = mfdcr(ebccfgd);
+	switch (gd->bd->bi_flashsize) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	case 32 << 20:
+		size_val = 5;
+		break;
+	case 64 << 20:
+		size_val = 6;
+		break;
+	case 128 << 20:
+		size_val = 7;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+	mtdcr(ebccfga, pb2cr);
+#else
+	mtdcr(ebccfga, pb0cr);
+#endif
+	mtdcr(ebccfgd, pbcr);
+
+	/*
+	 * Re-check to get correct base address
+	 */
+	flash_get_size(gd->bd->bi_flashstart, 0);
+
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	/* Env protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    CFG_ENV_ADDR_REDUND,
+			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    &flash_info[0]);
+#endif
+
+	/*
+	 * USB suff...
+	 */
+	if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+	    !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){
+		/* SDR Setting */
+		mfsdr(SDR0_PFC1, sdr0_pfc1);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+
+		/* An 8-bit/60MHz interface is the only possible alternative
+		   when connecting the Device to the PHY */
+		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
+
+		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+
+		mtsdr(SDR0_PFC1, sdr0_pfc1);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+		/*clear resets*/
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x00000000);
+		udelay(1000);
+		mtsdr(SDR0_SRST0, 0x00000000);
+
+		printf("USB:   Host\n");
+
+	} else if ((strcmp(act, "dev") == 0) || (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+		/*-------------------PATCH-------------------------------*/
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+		udelay (1000);
+		mtsdr(SDR0_SRST1, 0x672c6000);
+
+		udelay (1000);
+		mtsdr(SDR0_SRST0, 0x00000080);
+
+		udelay (1000);
+		mtsdr(SDR0_SRST1, 0x60206000);
+
+		*(unsigned int *)(0xe0000350) = 0x00000001;
+
+		udelay (1000);
+		mtsdr(SDR0_SRST1, 0x60306000);
+		/*-------------------PATCH-------------------------------*/
+
+		/* SDR Setting */
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2H0CR, usb2h0cr);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
+		mfsdr(SDR0_PFC1, sdr0_pfc1);
+
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;		/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;		/*0*/
+
+		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;		/*0*/
+
+		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+
+		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;		/*1*/
+
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
+		mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+		/*clear resets*/
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x00000000);
+		udelay(1000);
+		mtsdr(SDR0_SRST0, 0x00000000);
+
+		printf("USB:   Device\n");
+	}
+
+	/*
+	 * Clear PLB4A0_ACR[WRP]
+	 * This fix will make the MAL burst disabling patch for the Linux
+	 * EMAC driver obsolete.
+	 */
+	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+	mtdcr(plb4_acr, reg);
+
+#ifdef CONFIG_FPGA
+	pmc440_init_fpga();
+#endif
+
+	/* turn off POST LED */
+	out_be32((void*)GPIO1_OR,  in_be32((void*)GPIO1_OR) & ~GPIO1_POST_N);
+	/* turn on RUN LED */
+	out_be32((void*)GPIO0_OR,  in_be32((void*)GPIO0_OR) & ~GPIO0_LED_RUN_N);
+	return 0;
+}
+
+int is_monarch(void)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_NONMONARCH)
+		return 0;
+
+	return 1;
+}
+
+int pci_is_66mhz(void)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_M66EN)
+		return 1;
+	return 0;
+}
+
+int board_revision(void)
+{
+	return (int)((in_be32((void*)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
+}
+
+int checkboard(void)
+{
+	puts("Board: esd GmbH - PMC440");
+
+	gd->board_type = board_revision();
+	printf(", Rev 1.%ld, ", gd->board_type);
+
+	if (!is_monarch()) {
+		puts("non-");
+	}
+
+	printf("monarch, PCI=%s MHz\n", pci_is_66mhz() ? "66" : "33");
+	return (0);
+}
+
+
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices. Some OSs rely on this.
+ */
+void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char int_line[] = {IRQ_PCIC, IRQ_PCID, IRQ_PCIA, IRQ_PCIB};
+
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+				   int_line[PCI_DEV(dev) & 0x03]);
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long addr;
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB3 devices to 0.
+	  | Set PLB3 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB4 devices to 0.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*-------------------------------------------------------------------------+
+	  | Set Nebula PLB4 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+#ifdef CONFIG_PCI_PNP
+	hose->fixup_irq = pmc440_pci_fixup_irq;
+#endif
+
+	return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------------+
+	  | PowerPC440EPX PCI Master configuration.
+	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	  |   PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
+	  |   Use byte reversed out routines to handle endianess.
+	  | Make this region non-prefetchable.
+	  +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xc0000001);	/* 1G + No prefetching, and enable region */
+
+	if (!is_monarch()) {
+		/* BAR1: top 64MB of RAM */
+		out32r(PCIX0_PTM1MS, 0xfc000001);	/* Memory Size/Attribute */
+		out32r(PCIX0_PTM1LA, 0x0c000000);       /* Local Addr. Reg */
+	} else {
+		/* BAR1: complete 256MB RAM (TODO: make dynamic) */
+		out32r(PCIX0_PTM1MS, 0xf0000001);	/* Memory Size/Attribute */
+		out32r(PCIX0_PTM1LA, 0x00000000);       /* Local Addr. Reg */
+	}
+
+	/* BAR2: 16 MB FPGA registers */
+	out32r(PCIX0_PTM2MS, 0xff000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0xef000000);	/* Local Addr. Reg */
+
+	if (is_monarch()) {
+		/* BAR2: map FPGA registers behind system memory at 1GB */
+		pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008);
+	}
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+
+#if 0   /* disabled for PMC405 backward compatibility */
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+#endif
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+	if (!is_monarch()) {
+		/* Program the board's subsystem id/classcode */
+		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
+				      CFG_PCI_SUBSYS_ID_NONMONARCH);
+		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
+				      CFG_PCI_CLASSCODE_NONMONARCH);
+
+		/* PCI configuration done: release ERREADY */
+		out_be32((void*)GPIO1_OR,  in_be32((void*)GPIO1_OR)  | GPIO1_PPC_EREADY);
+		out_be32((void*)GPIO1_TCR, in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
+	} else {
+		/* Program the board's subsystem id/classcode */
+		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
+				      CFG_PCI_SUBSYS_ID_MONARCH);
+		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
+				      CFG_PCI_CLASSCODE_MONARCH);
+	}
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*--------------------------------------------------------------------------+
+	  | Write the PowerPC440 EP PCI Configuration regs.
+	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	  +--------------------------------------------------------------------------*/
+	if (is_monarch()) {
+		pci_read_config_word(0, PCI_COMMAND, &temp_short);
+		pci_write_config_word(0, PCI_COMMAND,
+				      temp_short | PCI_COMMAND_MASTER |
+				      PCI_COMMAND_MEMORY);
+	}
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+
+static void wait_for_pci_ready(void)
+{
+	int i;
+	char *s = getenv("pcidelay");
+	if (s) {
+		int ms = simple_strtoul(s, NULL, 10);
+		printf("PCI:   Waiting for %d ms\n", ms);
+		for (i=0; i<ms; i++)
+			udelay(1000);
+	}
+
+	if (!(in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY)) {
+		printf("PCI:   Waiting for EREADY (CTRL-C to skip) ... ");
+		while (1) {
+			if (ctrlc()) {
+				puts("abort\n");
+				break;
+			}
+			if (in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY) {
+				printf("done\n");
+				break;
+			}
+		}
+	}
+}
+
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	char *s = getenv("pciscan");
+	if (s == NULL)
+		if (is_monarch()) {
+			wait_for_pci_ready();
+			return 1;
+		} else
+			return 0;
+	else if (!strcmp(s, "yes"))
+		return 1;
+
+	return 0;
+}
+#endif /* defined(CONFIG_PCI) */
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+	if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0df0);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
+	}
+
+	if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0df0);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
+	}
+}
+#endif
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *	               0: disable write
+ *		       1: enable write
+ *  Returns:           -1: wrong device address
+ *                      0: dis-/en- able done
+ *		     0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+	if ((CFG_I2C_EEPROM_ADDR != dev_addr) && (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO_SINT2. */
+			out32(GPIO0_OR, in32(GPIO0_OR) & ~GPIO0_EP_EEP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO_SINT2. */
+			out32(GPIO0_OR, in32(GPIO0_OR) | GPIO0_EP_EEP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in32(GPIO0_OR) & GPIO0_EP_EEP));
+			break;
+		}
+	}
+	return state;
+}
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+
+#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+	unsigned end = offset + cnt;
+	unsigned blk_off;
+	int rcode = 0;
+
+#if defined(CFG_EEPROM_WREN)
+	eeprom_write_enable(dev_addr, 1);
+#endif
+	/* Write data until done or would cross a write page boundary.
+	 * We must write the address again when changing pages
+	 * because the address counter only increments within a page.
+	 */
+
+	while (offset < end) {
+		unsigned alen, len;
+		unsigned maxlen;
+		uchar addr[2];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 8;		/* block number */
+		addr[1] = blk_off;		/* block offset */
+		alen	= 2;
+		addr[0] |= dev_addr;		/* insert device address */
+
+		len = end - offset;
+
+#define	BOOT_EEPROM_PAGE_SIZE	   (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define	BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
+
+		maxlen = BOOT_EEPROM_PAGE_SIZE - BOOT_EEPROM_PAGE_OFFSET(blk_off);
+		if (maxlen > I2C_RXTX_LEN)
+			maxlen = I2C_RXTX_LEN;
+
+		if (len > maxlen)
+			len = maxlen;
+
+		if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
+			rcode = 1;
+
+		buffer += len;
+		offset += len;
+
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+	}
+#if defined(CFG_EEPROM_WREN)
+	eeprom_write_enable(dev_addr, 0);
+#endif
+	return rcode;
+}
+
+
+int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+	unsigned end = offset + cnt;
+	unsigned blk_off;
+	int rcode = 0;
+
+	/* Read data until done or would cross a page boundary.
+	 * We must write the address again when changing pages
+	 * because the next page may be in a different device.
+	 */
+	while (offset < end) {
+		unsigned alen, len;
+		unsigned maxlen;
+		uchar addr[2];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 8;		/* block number */
+		addr[1] = blk_off;		/* block offset */
+		alen	= 2;
+
+		addr[0] |= dev_addr;		/* insert device address */
+
+		len = end - offset;
+
+		maxlen = 0x100 - blk_off;
+		if (maxlen > I2C_RXTX_LEN)
+			maxlen = I2C_RXTX_LEN;
+		if (len > maxlen)
+			len = maxlen;
+
+		if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
+			rcode = 1;
+		buffer += len;
+		offset += len;
+	}
+
+	return rcode;
+}
+
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+int usb_board_init(void)
+{
+	char *act = getenv("usbact");
+	int i;
+
+	if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+	    !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
+		/* enable power on USB socket */
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+
+	for (i=0; i<1000; i++)
+		udelay(1000);
+
+	return 0;
+}
+
+int usb_board_stop(void)
+{
+	/* disable power on USB socket */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_USB_PWR_N);
+	return 0;
+}
+
+int usb_board_init_fail(void)
+{
+	usb_board_stop();
+	return 0;
+}
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/esd/pmc440/pmc440.h b/board/esd/pmc440/pmc440.h
new file mode 100644
index 000000000..7e70fd1cb
--- /dev/null
+++ b/board/esd/pmc440/pmc440.h
@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PMC440_H__
+#define __PMC440_H__
+
+
+/*-----------------------------------------------------------------------
+ * GPIOs
+ */
+#define GPIO1_INTA_FAKE           (0x80000000 >> (45-32)) /* GPIO45 OD */
+#define GPIO1_NONMONARCH          (0x80000000 >> (63-32)) /* GPIO63 I */
+#define GPIO1_PPC_EREADY          (0x80000000 >> (62-32)) /* GPIO62 I/O */
+#define GPIO1_M66EN               (0x80000000 >> (61-32)) /* GPIO61 I */
+#define GPIO1_POST_N              (0x80000000 >> (60-32)) /* GPIO60 O */
+#define GPIO1_IOEN_N              (0x80000000 >> (50-32)) /* GPIO50 O */
+#define GPIO1_HWID_MASK           (0xf0000000 >> (56-32)) /* GPIO56..59 I */
+
+#define GPIO1_USB_PWR_N           (0x80000000 >> (32-32)) /* GPIO32 I */
+#define GPIO0_LED_RUN_N           (0x80000000 >> 30)      /* GPIO30 O */
+#define GPIO0_EP_EEP              (0x80000000 >> 23)      /* GPIO23 O */
+#define GPIO0_USB_ID              (0x80000000 >> 21)      /* GPIO21 I */
+#define GPIO0_USB_PRSNT           (0x80000000 >> 20)      /* GPIO20 I */
+#define GPIO0_SELF_RST            (0x80000000 >> 6)       /* GPIO6  OD */
+
+/* FPGA programming pin configuration */
+#define GPIO1_FPGA_PRG            (0x80000000 >> (53-32)) /* FPGA program pin (ppc output) */
+#define GPIO1_FPGA_CLK            (0x80000000 >> (51-32)) /* FPGA clk pin (ppc output)     */
+#define GPIO1_FPGA_DATA           (0x80000000 >> (52-32)) /* FPGA data pin (ppc output)    */
+#define GPIO1_FPGA_DONE           (0x80000000 >> (55-32)) /* FPGA done pin (ppc input)     */
+#define GPIO1_FPGA_INIT           (0x80000000 >> (54-32)) /* FPGA init pin (ppc input)     */
+#define GPIO0_FPGA_FORCEINIT      (0x80000000 >> 27)      /* low: force INIT# low */
+
+/*-----------------------------------------------------------------------
+ * FPGA interface
+ */
+#define FPGA_BA CFG_FPGA_BASE0
+#define FPGA_OUT32(p,v) out_be32(((void*)(p)), (v))
+#define FPGA_IN32(p) in_be32((void*)(p))
+#define FPGA_SETBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) | (v))
+#define FPGA_CLRBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) & ~(v))
+
+struct pmc440_fifo_s {
+	u32 data;
+	u32 ctrl;
+};
+
+/* fifo ctrl register */
+#define FIFO_IE              (1 << 15)
+#define FIFO_OVERFLOW        (1 << 10)
+#define FIFO_EMPTY           (1 <<  9)
+#define FIFO_FULL            (1 <<  8)
+#define FIFO_LEVEL_MASK      0x000000ff
+
+#define FIFO_COUNT           4
+
+struct pmc440_fpga_s {
+	u32 ctrla;
+	u32 status;
+	u32 ctrlb;
+	u32 pad1[0x40 / sizeof(u32) - 3];
+	u32 irig_time;                  /* offset: 0x0040 */
+	u32 irig_tod;
+	u32 irig_cf;
+	u32 pad2;
+	u32 irig_rx_time;               /* offset: 0x0050 */
+	u32 pad3[3];
+	u32 hostctrl;                   /* offset: 0x0060 */
+	u32 pad4[0x20 / sizeof(u32) - 1];
+	struct pmc440_fifo_s fifo[FIFO_COUNT]; /* 0x0080..0x009f */
+};
+
+typedef struct pmc440_fpga_s pmc440_fpga_t;
+
+/* ctrl register */
+#define CTRL_HOST_IE         (1 <<  8)
+
+/* outputs */
+#define RESET_EN    (1 << 31)
+#define CLOCK_EN    (1 << 30)
+#define RESET_OUT   (1 << 19)
+#define CLOCK_OUT   (1 << 22)
+#define RESET_OUT   (1 << 19)
+#define IRIGB_R_OUT (1 << 14)
+
+
+/* status register */
+#define STATUS_VERSION_SHIFT 24
+#define STATUS_VERSION_MASK  0xff000000
+#define STATUS_HWREV_SHIFT   20
+#define STATUS_HWREV_MASK    0x00f00000
+
+#define STATUS_CAN_ISF       (1 << 11)
+#define STATUS_CSTM_ISF      (1 << 10)
+#define STATUS_FIFO_ISF      (1 <<  9)
+#define STATUS_HOST_ISF      (1 <<  8)
+
+
+/* inputs */
+#define RESET_IN    (1 << 0)
+#define CLOCK_IN    (1 << 1)
+#define IRIGB_R_IN  (1 << 5)
+
+
+/* hostctrl register */
+#define HOSTCTRL_PMCRSTOUT_GATE (1 <<  17)
+#define HOSTCTRL_PMCRSTOUT_FLAG (1 <<  16)
+#define HOSTCTRL_CSTM1IE_GATE (1 <<  7)
+#define HOSTCTRL_CSTM1IW_FLAG (1 <<  6)
+#define HOSTCTRL_CSTM0IE_GATE (1 <<  5)
+#define HOSTCTRL_CSTM0IW_FLAG (1 <<  4)
+#define HOSTCTRL_FIFOIE_GATE (1 <<  3)
+#define HOSTCTRL_FIFOIE_FLAG (1 <<  2)
+#define HOSTCTRL_HCINT_GATE  (1 <<  1)
+#define HOSTCTRL_HCINT_FLAG  (1 <<  0)
+
+#define NGCC_CTRL_BASE         (CFG_FPGA_BASE0 + 0x80000)
+#define NGCC_CTRL_FPGARST_N    (1 <<  2)
+
+/*-----------------------------------------------------------------------
+ * FPGA to PPC interrupt
+ */
+#define IRQ0_FPGA            (32+28) /* UIC1 - FPGA internal */
+#define IRQ1_FPGA            (32+30) /* UIC1 - custom module */
+#define IRQ2_FPGA            (64+ 3) /* UIC2 - custom module / CAN */
+#define IRQ_ETH0             (64+ 4) /* UIC2 */
+#define IRQ_ETH1             (   27) /* UIC0 */
+#define IRQ_RTC              (64+ 0) /* UIC2 */
+#define IRQ_PCIA             (64+ 1) /* UIC2 */
+#define IRQ_PCIB             (32+18) /* UIC1 */
+#define IRQ_PCIC             (32+19) /* UIC1 */
+#define IRQ_PCID             (32+20) /* UIC1 */
+
+#endif /* __PMC440_H__ */
diff --git a/board/esd/pmc440/sdram.c b/board/esd/pmc440/sdram.c
new file mode 100644
index 000000000..78e2cb42a
--- /dev/null
+++ b/board/esd/pmc440/sdram.c
@@ -0,0 +1,442 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debug output */
+#undef DEBUG
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc440.h>
+
+#include "sdram.h"
+
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
+	defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dlllock.
+ +----------------------------------------------------------------------------*/
+static int wait_for_dlllock(void)
+{
+	unsigned long val;
+	int wait = 0;
+
+	/* -----------------------------------------------------------+
+	 * Wait for the DCC master delay line to finish calibration
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_17);
+	val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+			/* dlllockreg bit on */
+			return 0;
+		else
+			wait++;
+	}
+	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+	debug("Waiting for dlllockreg bit to raise\n");
+
+	return -1;
+}
+#endif
+
+#if defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dram_init_complete.
+ +----------------------------------------------------------------------------*/
+int wait_for_dram_init_complete(void)
+{
+	unsigned long val;
+	int wait = 0;
+
+	/* --------------------------------------------------------------+
+	 * Wait for 'DRAM initialization complete' bit in status register
+	 * -------------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_00);
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+			/* 'DRAM initialization complete' bit */
+			return 0;
+		else
+			wait++;
+	}
+
+	debug("DRAM initialization complete bit in status register did not rise\n");
+
+	return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+/*-----------------------------------------------------------------------------+
+ * denali_core_search_data_eye.
+ +----------------------------------------------------------------------------*/
+void denali_core_search_data_eye(unsigned long memory_size)
+{
+	int k, j;
+	u32 val;
+	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+	volatile u32 *ram_pointer;
+	u32 test[NUM_TRIES] = {
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+	ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
+
+	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+		/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+		/* -----------------------------------------------------------+
+		 * De-assert 'start' parameter.
+		 * ----------------------------------------------------------*/
+		mtdcr(ddrcfga, DDR0_02);
+		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+		mtdcr(ddrcfgd, val);
+
+		/* -----------------------------------------------------------+
+		 * Set 'wr_dqs_shift'
+		 * ----------------------------------------------------------*/
+		mtdcr(ddrcfga, DDR0_09);
+		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+			| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+		mtdcr(ddrcfgd, val);
+
+		/* -----------------------------------------------------------+
+		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+		 * ----------------------------------------------------------*/
+		dqs_out_shift = wr_dqs_shift + 32;
+		mtdcr(ddrcfga, DDR0_22);
+		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+			| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+		mtdcr(ddrcfgd, val);
+
+		passing_cases = 0;
+
+		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+			/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+			/* -----------------------------------------------------------+
+			 * Set 'dll_dqs_delay_X'.
+			 * ----------------------------------------------------------*/
+			/* dll_dqs_delay_0 */
+			mtdcr(ddrcfga, DDR0_17);
+			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+				| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+			mtdcr(ddrcfga, DDR0_18);
+			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+				| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+			mtdcr(ddrcfga, DDR0_19);
+			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+				| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/* -----------------------------------------------------------+
+			 * Assert 'start' parameter.
+			 * ----------------------------------------------------------*/
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/* -----------------------------------------------------------+
+			 * Wait for the DCC master delay line to finish calibration
+			 * ----------------------------------------------------------*/
+			if (wait_for_dlllock() != 0) {
+				printf("dlllock did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			ppcMsync();
+			ppcMbar();
+
+			if (wait_for_dram_init_complete() != 0) {
+				printf("dram init complete did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			udelay(100);  /* wait 100us to ensure init is really completed !!! */
+
+			/* write values */
+			for (j=0; j<NUM_TRIES; j++) {
+				ram_pointer[j] = test[j];
+
+				/* clear any cache at ram location */
+				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+			}
+
+			/* read values back */
+			for (j=0; j<NUM_TRIES; j++) {
+				for (k=0; k<NUM_READS; k++) {
+					/* clear any cache at ram location */
+					__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+					if (ram_pointer[j] != test[j])
+						break;
+				}
+
+				/* read error */
+				if (k != NUM_READS)
+					break;
+			}
+
+			/* See if the dll_dqs_delay_X value passed.*/
+			if (j < NUM_TRIES) {
+				/* Failed */
+				passing_cases = 0;
+				/* break; */
+			} else {
+				/* Passed */
+				if (passing_cases == 0)
+					dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+				passing_cases++;
+				if (passing_cases >= max_passing_cases) {
+					max_passing_cases = passing_cases;
+					wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+					dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+					dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+				}
+			}
+
+			/* -----------------------------------------------------------+
+			 * De-assert 'start' parameter.
+			 * ----------------------------------------------------------*/
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+			mtdcr(ddrcfgd, val);
+
+		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+	/* -----------------------------------------------------------+
+	 * Largest passing window is now detected.
+	 * ----------------------------------------------------------*/
+
+	/* Compute dll_dqs_delay_X value */
+	dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+	debug("DQS calibration - Window detected:\n");
+	debug("max_passing_cases = %d\n", max_passing_cases);
+	debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
+	debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
+	debug("dll_dqs_delay_X window = %d - %d\n",
+	       dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+	/* -----------------------------------------------------------+
+	 * De-assert 'start' parameter.
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+	mtdcr(ddrcfgd, val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'wr_dqs_shift'
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_09);
+	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+		| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_09=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+	 * ----------------------------------------------------------*/
+	dqs_out_shift = wr_dqs_shift + 32;
+	mtdcr(ddrcfga, DDR0_22);
+	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+		| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_22=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'dll_dqs_delay_X'.
+	 * ----------------------------------------------------------*/
+	/* dll_dqs_delay_0 */
+	mtdcr(ddrcfga, DDR0_17);
+	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+		| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_17=0x%08lx\n", val);
+
+	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+	mtdcr(ddrcfga, DDR0_18);
+	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+		| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_18=0x%08lx\n", val);
+
+	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+	mtdcr(ddrcfga, DDR0_19);
+	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+		| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_19=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Assert 'start' parameter.
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+	mtdcr(ddrcfgd, val);
+
+	ppcMsync();
+	ppcMbar();
+
+	/* -----------------------------------------------------------+
+	 * Wait for the DCC master delay line to finish calibration
+	 * ----------------------------------------------------------*/
+	if (wait_for_dlllock() != 0) {
+		printf("dlllock did not occur !!!\n");
+		hang();
+	}
+	ppcMsync();
+	ppcMbar();
+
+	if (wait_for_dram_init_complete() != 0) {
+		printf("dram init complete did not occur !!!\n");
+		hang();
+	}
+	udelay(100);  /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
+#if defined(CONFIG_NAND_SPL)
+/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+ * for the 4k NAND boot image so define bus_frequency to 133MHz here
+ * which is save for the refresh counter setup.
+ */
+#define get_bus_freq(val)	133000000
+#endif
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if !defined(CONFIG_NAND_SPL)
+	ulong speed = get_bus_freq(0);
+#else
+	ulong speed = 133333333;	/* 133MHz is on the safe side	*/
+#endif
+
+	mtsdram(DDR0_02, 0x00000000);
+
+	mtsdram(DDR0_00, 0x0000190A);
+	mtsdram(DDR0_01, 0x01000000);
+	mtsdram(DDR0_03, 0x02030602);
+	mtsdram(DDR0_04, 0x0A020200);
+	mtsdram(DDR0_05, 0x02020308);
+	mtsdram(DDR0_06, 0x0102C812);
+	mtsdram(DDR0_07, 0x000D0100);
+	mtsdram(DDR0_08, 0x02430001);
+	mtsdram(DDR0_09, 0x00011D5F);
+	mtsdram(DDR0_10, 0x00000300);
+	mtsdram(DDR0_11, 0x0027C800);
+	mtsdram(DDR0_12, 0x00000003);
+	mtsdram(DDR0_14, 0x00000000);
+	mtsdram(DDR0_17, 0x19000000);
+	mtsdram(DDR0_18, 0x19191919);
+	mtsdram(DDR0_19, 0x19191919);
+	mtsdram(DDR0_20, 0x0B0B0B0B);
+	mtsdram(DDR0_21, 0x0B0B0B0B);
+	mtsdram(DDR0_22, 0x00267F0B);
+	mtsdram(DDR0_23, 0x00000000);
+	mtsdram(DDR0_24, 0x01010002);
+	if (speed > 133333334)
+		mtsdram(DDR0_26, 0x5B26050C);
+	else
+		mtsdram(DDR0_26, 0x5B260408);
+	mtsdram(DDR0_27, 0x0000682B);
+	mtsdram(DDR0_28, 0x00000000);
+	mtsdram(DDR0_31, 0x00000000);
+	mtsdram(DDR0_42, 0x01000006);
+	mtsdram(DDR0_43, 0x030A0200);
+	mtsdram(DDR0_44, 0x00000003);
+	mtsdram(DDR0_02, 0x00000001);
+
+	wait_for_dlllock();
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+#ifdef CONFIG_DDR_DATA_EYE
+	/* -----------------------------------------------------------+
+	 * Perform data eye search if requested.
+	 * ----------------------------------------------------------*/
+	denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+#endif
+
+	return (CFG_MBYTES_SDRAM << 20);
+}
diff --git a/board/esd/pmc440/sdram.h b/board/esd/pmc440/sdram.h
new file mode 100644
index 000000000..7f847aa2a
--- /dev/null
+++ b/board/esd/pmc440/sdram.h
@@ -0,0 +1,505 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPD_SDRAM_DENALI_H_
+#define _SPD_SDRAM_DENALI_H_
+
+#define ppcMsync	sync
+#define ppcMbar		eieio
+
+/* General definitions */
+#define MAX_SPD_BYTE        128         /* highest SPD byte # to read */
+#define DENALI_REG_NUMBER   45          /* 45 Regs in PPC440EPx Denali Core */
+#define SUPPORTED_DIMMS_NB  7           /* Number of supported DIMM modules types */
+#define SDRAM_NONE          0           /* No DIMM detected in Slot */
+#define MAXRANKS            2           /* 2 ranks maximum */
+
+/* Supported PLB Frequencies */
+#define PLB_FREQ_133MHZ     133333333
+#define PLB_FREQ_152MHZ     152000000
+#define PLB_FREQ_160MHZ     160000000
+#define PLB_FREQ_166MHZ     166666666
+
+/* Denali Core Registers */
+#define SDRAM_DCR_BASE 0x10
+
+#define DDR_DCR_BASE 0x10
+#define ddrcfga  (DDR_DCR_BASE+0x0)   /* DDR configuration address reg */
+#define ddrcfgd  (DDR_DCR_BASE+0x1)   /* DDR configuration data reg    */
+
+/*-----------------------------------------------------------------------------+
+  | Values for ddrcfga register - indirect addressing of these regs
+  +-----------------------------------------------------------------------------*/
+
+#define DDR0_00                         0x00
+#define DDR0_00_INT_ACK_MASK              0x7F000000 /* Write only */
+#define DDR0_00_INT_ACK_ALL               0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n)           ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n)           ((((unsigned long)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK           0x00FF0000 /* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0           0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1           0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2           0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3           0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4           0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5           0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6           0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7           0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK        0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK      0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_01                         0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK     0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n)  ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK     0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n)  ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK    0x00000700 /* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n)               ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n)               ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK             0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON           0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF          0x00000000
+
+#define DDR0_02                         0x02
+#define DDR0_02_MAX_CS_REG_MASK           0x02000000 /* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n)        ((((unsigned long)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n)        ((((unsigned long)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK          0x000F0000 /* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n)       ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK          0x00000F00 /* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n)       ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_02_START_MASK                0x00000001
+#define DDR0_02_START_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+#define DDR0_02_START_OFF                 0x00000000
+#define DDR0_02_START_ON                  0x00000001
+
+#define DDR0_03                         0x03
+#define DDR0_03_BSTLEN_MASK               0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n)            ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n)            ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK               0x00070000
+#define DDR0_03_CASLAT_ENCODE(n)            ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK           0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n)        ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n)        ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK             0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n)          ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n)          ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_04                         0x04
+#define DDR0_04_TRC_MASK                  0x1F000000
+#define DDR0_04_TRC_ENCODE(n)               ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n)               ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK                 0x00070000
+#define DDR0_04_TRRD_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK                 0x00000700
+#define DDR0_04_TRTP_ENCODE(n)              ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n)              ((((unsigned long)(n))>>8)&0x7)
+
+#define DDR0_05                         0x05
+#define DDR0_05_TMRD_MASK                 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n)              ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK                0x00070000
+#define DDR0_05_TEMRS_ENCODE(n)             ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n)             ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK                  0x00000F00
+#define DDR0_05_TRP_ENCODE(n)               ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n)               ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK             0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+
+#define DDR0_06                         0x06
+#define DDR0_06_WRITEINTERP_MASK          0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK                 0x00070000
+#define DDR0_06_TWTR_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK                 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK                 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n)              ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n)              ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_07                         0x07
+#define DDR0_07_NO_CMD_INIT_MASK          0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK                 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n)              ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK    0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK             0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n)          ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_08                         0x08
+#define DDR0_08_WRLAT_MASK                0x07000000
+#define DDR0_08_WRLAT_ENCODE(n)             ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n)             ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK                 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n)              ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK             0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n)          ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n)          ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK     0x00000001
+#define DDR0_08_DDRII_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_09                         0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK  0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK                0x00030000
+#define DDR0_09_RTT_0_ENCODE(n)             ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n)             ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK  0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK         0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n)      ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n)      ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_10                         0x0A
+#define DDR0_10_WRITE_MODEREG_MASK        0x00010000 /* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n)     ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n)     ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK               0x00000300
+#define DDR0_10_CS_MAP_NO_MEM             0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED    0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED    0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n)            ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n)            ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK  0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
+
+#define DDR0_11                         0x0B
+#define DDR0_11_SREFRESH_MASK             0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n)          ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK                0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n)             ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n)             ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK                 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+
+#define DDR0_12                         0x0C
+#define DDR0_12_TCKE_MASK                 0x0000007
+#define DDR0_12_TCKE_ENCODE(n)              ((((unsigned long)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n)              ((((unsigned long)(n))>>0)&0x7)
+
+#define DDR0_13                         0x0D
+
+#define DDR0_14                         0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK      0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n)   ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK                0x00010000
+#define DDR0_14_REDUC_64BITS              0x00000000
+#define DDR0_14_REDUC_32BITS              0x00010000
+#define DDR0_14_REDUC_ENCODE(n)             ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n)             ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK      0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n)   ((((unsigned long)(n))>>8)&0x1)
+
+#define DDR0_15                         0x0F
+
+#define DDR0_16                         0x10
+
+#define DDR0_17                         0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK      0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK           0x00010000 /* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED         0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED       0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n)        ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n)        ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK             0x00007F00 /* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n)          ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n)          ((((unsigned long)(n))>>8)&0x7F)
+
+#define DDR0_18                         0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK      0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK      0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK      0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK      0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_19                         0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK      0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK      0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK      0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK      0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_20                         0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK      0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK      0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK      0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK      0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_21                         0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK      0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK      0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK      0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK      0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_22                         0x16
+/* ECC */
+#define DDR0_22_CTRL_RAW_MASK             0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE      0x00000000 /* ECC not being used */
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY   0x01000000 /* ECC checking is on, but no attempts to correct*/
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM       0x02000000 /* No ECC RAM storage available */
+#define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC checking and correcting on */
+#define DDR0_22_CTRL_RAW_ENCODE(n)          ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n)          ((((unsigned long)(n))>>24)&0x3)
+
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK        0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK     0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n)  ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n)  ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_23                         0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK       0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n)   ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n)   ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK           0x00FF0000 /* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK           0x0000FF00 /* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n)        ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK                  0x00000001 /* Write only */
+#define DDR0_23_FWC_ENCODE(n)               ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_24                         0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK  0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK       0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK       0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK       0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n)    ((((unsigned long)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n)    ((((unsigned long)(n))>>0)&0x3)
+
+#define DDR0_25                         0x19
+#define DDR0_25_VERSION_MASK              0xFFFF0000 /* Read only */
+#define DDR0_25_VERSION_ENCODE(n)           ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n)           ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK  0x000003FF /* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_26                         0x1A
+#define DDR0_26_TRAS_MAX_MASK             0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK                 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_27                         0x1B
+#define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n)         ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n)         ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK                0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n)             ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n)             ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_28                         0x1C
+#define DDR0_28_EMRS3_DATA_MASK           0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n)        ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK           0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_29                         0x1D
+
+#define DDR0_30                         0x1E
+
+#define DDR0_31                         0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK       0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n)    ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n)    ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_32                         0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK    0xFFFFFFFF /* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33                         0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK    0x00000001 /* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_34                         0x22
+#define DDR0_34_ECC_U_ADDR_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35                         0x23
+#define DDR0_35_ECC_U_ADDR_MASK           0x00000001 /* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_36                         0x24
+#define DDR0_36_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37                         0x25
+#define DDR0_37_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38                         0x26
+#define DDR0_38_ECC_C_ADDR_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39                         0x27
+#define DDR0_39_ECC_C_ADDR_MASK           0x00000001 /* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_40                         0x28
+#define DDR0_40_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41                         0x29
+#define DDR0_41_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42                         0x2A
+#define DDR0_42_ADDR_PINS_MASK            0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n)         ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n)         ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK      0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n)   ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n)   ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_43                         0x2B
+#define DDR0_43_TWR_MASK                  0x07000000
+#define DDR0_43_TWR_ENCODE(n)               ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n)               ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK              0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n)           ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n)           ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK          0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n)       ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n)       ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK      0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS     0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS     0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n)   ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_44                         0x2C
+#define DDR0_44_TRCD_MASK                 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n)              ((((unsigned long)(n))>>0)&0xFF)
+
+#endif /* _SPD_SDRAM_DENALI_H_ */
diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds
new file mode 100644
index 000000000..cf2e2b558
--- /dev/null
+++ b/board/esd/pmc440/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    /* Align to next NAND block */
+    . = ALIGN(0x4000);
+    common/environment.o  (.ppcenv)
+    /* Keep some space here for redundant env and potential bad env blocks */
+    . = ALIGN(0x10000);
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/esd/cpci440/u-boot.lds b/board/esd/pmc440/u-boot.lds
index 57220d385..a423f9828 100644
--- a/board/esd/cpci440/u-boot.lds
+++ b/board/esd/pmc440/u-boot.lds
@@ -28,13 +28,11 @@ SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/
 SECTIONS
 {
   .resetvec 0xFFFFFFFC :
-/*  .resetvec 0x01FFFFFC :*/
   {
     *(.resetvec)
   } = 0xffff
 
   .bootpg 0xFFFFF000 :
-/*  .bootpg 0x01FFF000 :*/
   {
     cpu/ppc4xx/start.o	(.bootpg)
   } = 0xffff
@@ -69,20 +67,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/esd/cpci440/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -95,7 +79,6 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
-    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -154,6 +137,9 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
+
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
   _end = . ;
   PROVIDE (end = .);
 }
diff --git a/board/esd/voh405/u-boot.lds b/board/esd/voh405/u-boot.lds
index 43f776579..43fe6ca0b 100644
--- a/board/esd/voh405/u-boot.lds
+++ b/board/esd/voh405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 2857a0bef..87a584979 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/processor.h>
 #include <command.h>
 #include <malloc.h>
@@ -112,11 +113,11 @@ int misc_init_f (void)
 
 int misc_init_r (void)
 {
-	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
-	volatile unsigned short *lcd_contrast =
+	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	unsigned short *lcd_contrast =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
-	volatile unsigned short *lcd_backlight =
+	unsigned short *lcd_backlight =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
@@ -180,25 +181,37 @@ int misc_init_r (void)
 	/*
 	 * Reset FPGA via FPGA_INIT pin
 	 */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~FPGA_INIT);  /* reset low */
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~FPGA_INIT);  /* reset low */
 	udelay(1000); /* wait 1ms */
-	out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_INIT);   /* reset high */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | FPGA_INIT);   /* reset high */
 	udelay(1000); /* wait 1ms */
 
 	/*
 	 * Reset external DUARTs
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Setup EEPROM write protection
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+
+	/*
 	 * Enable interrupts in exar duart mcr[3]
 	 */
-	*duart0_mcr = 0x08;
-	*duart1_mcr = 0x08;
+	out_8(duart0_mcr, 0x08);
+	out_8(duart1_mcr, 0x08);
 
 	/*
 	 * Init lcd interface and display logo
@@ -240,17 +253,23 @@ int misc_init_r (void)
 	/*
 	 * Set invert bit in small lcd controller
 	 */
-	*(unsigned char *)(CFG_LCD_SMALL_REG + 2) |= 0x01;
+	out_8((unsigned char *)(CFG_LCD_SMALL_REG + 2),
+	      in_8((unsigned char *)(CFG_LCD_SMALL_REG + 2)) | 0x01);
 
 	/*
 	 * Set default contrast voltage on epson vga controller
 	 */
-	*lcd_contrast = 0x4646;
+	out_be16(lcd_contrast, 0x4646);
 
 	/*
 	 * Enable backlight
 	 */
-	*lcd_backlight = 0xffff;
+	out_be16(lcd_backlight, 0xffff);
+
+	/*
+	 * Enable external I2C bus
+	 */
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_IIC_ON);
 
 	return (0);
 }
@@ -281,11 +300,6 @@ int checkboard (void)
 
 	putc ('\n');
 
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
 	return 0;
 }
 
@@ -334,3 +348,86 @@ void ide_set_reset(int on)
 	}
 }
 #endif /* CONFIG_IDE_RESET */
+
+#if defined(CONFIG_RESET_PHY_R)
+void reset_phy(void)
+{
+#ifdef CONFIG_LXT971_NO_SLEEP
+
+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
+#endif
+}
+#endif
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *	               0: disable write
+ *		       1: enable write
+ *  Returns:           -1: wrong device address
+ *                      0: dis-/en- able done
+ *		     0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+			break;
+		}
+	}
+	return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		if (state < 0) {
+			puts ("Query of write access state failed.\n");
+		} else {
+			printf ("Write access for device 0x%0x is %sabled.\n",
+				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0) {
+			puts ("Setup of write access state failed.\n");
+		}
+	}
+
+	return state;
+}
+
+U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
+	   "eepwren - Enable / disable / query EEPROM write access\n",
+	   NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */
diff --git a/board/esd/vom405/u-boot.lds b/board/esd/vom405/u-boot.lds
index f7a20d1da..8ba6ad5f7 100644
--- a/board/esd/vom405/u-boot.lds
+++ b/board/esd/vom405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/esd/wuh405/u-boot.lds b/board/esd/wuh405/u-boot.lds
index 95854f293..b49e3ff9f 100644
--- a/board/esd/wuh405/u-boot.lds
+++ b/board/esd/wuh405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/exbitgen/u-boot.lds b/board/exbitgen/u-boot.lds
index d5dea8238..b482aea31 100644
--- a/board/exbitgen/u-boot.lds
+++ b/board/exbitgen/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 44f613e41..9cee9f19b 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -31,7 +31,9 @@ LIB	= $(obj)lib$(VENDOR).a
 
 COBJS	:= sys_eeprom.o	\
 	   pixis.o	\
-	   pq-mds-pib.o
+	   pq-mds-pib.o \
+	   fsl_logo_bmp.o \
+	   fsl_diu_fb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/cds/common/cadmus.c b/board/freescale/common/cadmus.c
index 5f86de5af..5f86de5af 100644
--- a/board/cds/common/cadmus.c
+++ b/board/freescale/common/cadmus.c
diff --git a/board/cds/common/cadmus.h b/board/freescale/common/cadmus.h
index 217ea6425..217ea6425 100644
--- a/board/cds/common/cadmus.h
+++ b/board/freescale/common/cadmus.h
diff --git a/board/cds/common/eeprom.c b/board/freescale/common/eeprom.c
index 5034e0ca2..5034e0ca2 100644
--- a/board/cds/common/eeprom.c
+++ b/board/freescale/common/eeprom.c
diff --git a/board/cds/common/eeprom.h b/board/freescale/common/eeprom.h
index 12a078904..12a078904 100644
--- a/board/cds/common/eeprom.h
+++ b/board/freescale/common/eeprom.h
diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c
new file mode 100644
index 000000000..c1dc48c62
--- /dev/null
+++ b/board/freescale/common/fsl_diu_fb.c
@@ -0,0 +1,624 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <i2c.h>
+#include <malloc.h>
+
+#ifdef CONFIG_FSL_DIU_FB
+
+#include "fsl_diu_fb.h"
+
+
+#ifdef DEBUG
+#define DPRINTF(fmt, args...) printf("%s: " fmt,__FUNCTION__,## args)
+#else
+#define DPRINTF(fmt, args...)
+#endif
+
+
+struct fb_videomode {
+	const char *name;	/* optional */
+	unsigned int refresh;		/* optional */
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int pixclock;
+	unsigned int left_margin;
+	unsigned int right_margin;
+	unsigned int upper_margin;
+	unsigned int lower_margin;
+	unsigned int hsync_len;
+	unsigned int vsync_len;
+	unsigned int sync;
+	unsigned int vmode;
+	unsigned int flag;
+};
+
+#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
+#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+
+/*
+ * These parameters give default parameters
+ * for video output 1024x768,
+ * FIXME - change timing to proper amounts
+ * hsync 31.5kHz, vsync 60Hz
+ */
+static struct fb_videomode fsl_diu_mode_1024 = {
+	.refresh	= 60,
+	.xres		= 1024,
+	.yres		= 768,
+	.pixclock	= 15385,
+	.left_margin	= 160,
+	.right_margin	= 24,
+	.upper_margin	= 29,
+	.lower_margin	= 3,
+	.hsync_len	= 136,
+	.vsync_len	= 6,
+	.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+static struct fb_videomode fsl_diu_mode_1280 = {
+	.name		= "1280x1024-60",
+	.refresh	= 60,
+	.xres		= 1280,
+	.yres		= 1024,
+	.pixclock	= 9375,
+	.left_margin	= 38,
+	.right_margin	= 128,
+	.upper_margin	= 2,
+	.lower_margin	= 7,
+	.hsync_len	= 216,
+	.vsync_len	= 37,
+	.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+/*
+ * These are the fields of area descriptor(in DDR memory) for every plane
+ */
+struct diu_ad {
+	/* Word 0(32-bit) in DDR memory */
+	unsigned int pix_fmt; /* hard coding pixel format */
+	/* Word 1(32-bit) in DDR memory */
+	unsigned int addr;
+	/* Word 2(32-bit) in DDR memory */
+	unsigned int src_size_g_alpha;
+	/* Word 3(32-bit) in DDR memory */
+	unsigned int aoi_size;
+	/* Word 4(32-bit) in DDR memory */
+	unsigned int offset_xyi;
+	/* Word 5(32-bit) in DDR memory */
+	unsigned int offset_xyd;
+	/* Word 6(32-bit) in DDR memory */
+	unsigned int ckmax_r:8;
+	unsigned int ckmax_g:8;
+	unsigned int ckmax_b:8;
+	unsigned int res9:8;
+	/* Word 7(32-bit) in DDR memory */
+	unsigned int ckmin_r:8;
+	unsigned int ckmin_g:8;
+	unsigned int ckmin_b:8;
+	unsigned int res10:8;
+	/* Word 8(32-bit) in DDR memory */
+	unsigned int next_ad;
+	/* Word 9(32-bit) in DDR memory, just for 64-bit aligned */
+	unsigned int res1;
+	unsigned int res2;
+	unsigned int res3;
+}__attribute__ ((packed));
+
+/*
+ * DIU register map
+ */
+struct diu {
+	unsigned int desc[3];
+	unsigned int gamma;
+	unsigned int pallete;
+	unsigned int cursor;
+	unsigned int curs_pos;
+	unsigned int diu_mode;
+	unsigned int bgnd;
+	unsigned int bgnd_wb;
+	unsigned int disp_size;
+	unsigned int wb_size;
+	unsigned int wb_mem_addr;
+	unsigned int hsyn_para;
+	unsigned int vsyn_para;
+	unsigned int syn_pol;
+	unsigned int thresholds;
+	unsigned int int_status;
+	unsigned int int_mask;
+	unsigned int colorbar[8];
+	unsigned int filling;
+	unsigned int plut;
+} __attribute__ ((packed));
+
+struct diu_hw {
+	struct diu *diu_reg;
+	volatile unsigned int mode;		/* DIU operation mode */
+};
+
+struct diu_addr {
+	unsigned char  *  paddr;	/* Virtual address */
+	unsigned int 	   offset;
+};
+
+#define FSL_DIU_BASE_OFFSET	0x2C000	/* Offset of Display Interface Unit */
+
+/*
+ * Modes of operation of DIU
+ */
+#define MFB_MODE0	0	/* DIU off */
+#define MFB_MODE1	1	/* All three planes output to display */
+#define MFB_MODE2	2	/* Plane 1 to display,
+				 * planes 2+3 written back to memory */
+#define MFB_MODE3	3	/* All three planes written back to memory */
+#define MFB_MODE4	4	/* Color bar generation */
+
+#define MAX_CURS		32
+
+
+
+static struct fb_info fsl_fb_info;
+static struct diu_addr gamma, cursor;
+static struct diu_ad fsl_diu_fb_ad __attribute__ ((aligned(32)));
+static struct diu_ad dummy_ad __attribute__ ((aligned(32)));
+static unsigned char *dummy_fb;
+static struct diu_hw dr = {
+	.mode = MFB_MODE1,
+};
+
+int fb_enabled = 0;
+int fb_initialized = 0;
+const int default_xres = 1280;
+const int default_pixel_format = 0x88882317;
+
+static int map_video_memory(struct fb_info *info, unsigned long bytes_align);
+static void enable_lcdc(void);
+static void disable_lcdc(void);
+static int fsl_diu_enable_panel(struct fb_info *info);
+static int fsl_diu_disable_panel(struct fb_info *info);
+static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align);
+static u32 get_busfreq(void);
+
+
+int fsl_diu_init(int xres,
+		 unsigned int pixel_format,
+		 int gamma_fix,
+		 unsigned char *splash_bmp)
+{
+	struct fb_videomode *fsl_diu_mode_db;
+	struct diu_ad *ad = &fsl_diu_fb_ad;
+	struct diu *hw;
+	struct fb_info *info = &fsl_fb_info;
+	struct fb_var_screeninfo *var = &info->var;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile unsigned int *guts_clkdvdr = &gur->clkdvdr;
+	unsigned char *gamma_table_base;
+	unsigned int i, j;
+	unsigned long speed_ccb, temp, pixval;
+
+	DPRINTF("Enter fsl_diu_init\n");
+	dr.diu_reg = (struct diu *) (CFG_IMMR + FSL_DIU_BASE_OFFSET);
+	hw = (struct diu *) dr.diu_reg;
+
+	disable_lcdc();
+
+	if (xres == 1280) {
+		fsl_diu_mode_db = &fsl_diu_mode_1280;
+	} else {
+		fsl_diu_mode_db = &fsl_diu_mode_1024;
+	}
+
+	if (0 == fb_initialized) {
+		allocate_buf(&gamma, 768, 32);
+		DPRINTF("gamma is allocated @ 0x%x\n",
+			(unsigned int)gamma.paddr);
+		allocate_buf(&cursor, MAX_CURS * MAX_CURS * 2, 32);
+		DPRINTF("curosr is allocated @ 0x%x\n",
+			(unsigned int)cursor.paddr);
+
+		/* create a dummy fb and dummy ad */
+		dummy_fb = malloc(64);
+		if (NULL == dummy_fb) {
+			printf("Cannot allocate dummy fb\n");
+			return -1;
+		}
+		dummy_ad.addr = cpu_to_le32((unsigned int)dummy_fb);
+		dummy_ad.pix_fmt = 0x88882317;
+		dummy_ad.src_size_g_alpha = 0x04400000;	/* alpha = 0 */
+		dummy_ad.aoi_size = 0x02000400;
+		dummy_ad.offset_xyi = 0;
+		dummy_ad.offset_xyd = 0;
+		dummy_ad.next_ad = 0;
+		/* Memory allocation for framebuffer */
+		if (map_video_memory(info, 32)) {
+			printf("Unable to allocate fb memory 1\n");
+			return -1;
+		}
+	} else {
+		memset(info->screen_base, 0, info->smem_len);
+	}
+
+	dr.diu_reg->desc[0] = (unsigned int) &dummy_ad;
+	dr.diu_reg->desc[1] = (unsigned int) &dummy_ad;
+	dr.diu_reg->desc[2] = (unsigned int) &dummy_ad;
+	DPRINTF("dummy dr.diu_reg->desc[0] = 0x%x\n", dr.diu_reg->desc[0]);
+	DPRINTF("dummy desc[0] = 0x%x\n", hw->desc[0]);
+
+	/* read mode info */
+	var->xres = fsl_diu_mode_db->xres;
+	var->yres = fsl_diu_mode_db->yres;
+	var->bits_per_pixel = 32;
+	var->pixclock = fsl_diu_mode_db->pixclock;
+	var->left_margin = fsl_diu_mode_db->left_margin;
+	var->right_margin = fsl_diu_mode_db->right_margin;
+	var->upper_margin = fsl_diu_mode_db->upper_margin;
+	var->lower_margin = fsl_diu_mode_db->lower_margin;
+	var->hsync_len = fsl_diu_mode_db->hsync_len;
+	var->vsync_len = fsl_diu_mode_db->vsync_len;
+	var->sync = fsl_diu_mode_db->sync;
+	var->vmode = fsl_diu_mode_db->vmode;
+	info->line_length = var->xres * var->bits_per_pixel / 8;
+	info->logo_size = 0;
+	info->logo_height = 0;
+
+	ad->pix_fmt = pixel_format;
+	ad->addr    = cpu_to_le32((unsigned int)info->screen_base);
+	ad->src_size_g_alpha
+			= cpu_to_le32((var->yres << 12) | var->xres);
+	/* fix me. AOI should not be greater than display size */
+	ad->aoi_size 	= cpu_to_le32(( var->yres << 16) |  var->xres);
+	ad->offset_xyi = 0;
+	ad->offset_xyd = 0;
+
+	/* Disable chroma keying function */
+	ad->ckmax_r = 0;
+	ad->ckmax_g = 0;
+	ad->ckmax_b = 0;
+
+	ad->ckmin_r = 255;
+	ad->ckmin_g = 255;
+	ad->ckmin_b = 255;
+
+	gamma_table_base = gamma.paddr;
+	DPRINTF("gamma_table_base is allocated @ 0x%x\n",
+		(unsigned int)gamma_table_base);
+
+	/* Prep for DIU init  - gamma table */
+
+	for (i = 0; i <= 2; i++)
+		for (j = 0; j <= 255; j++)
+			*gamma_table_base++ = j;
+
+	if (gamma_fix == 1) {	/* fix the gamma */
+		DPRINTF("Fix gamma table\n");
+		gamma_table_base = gamma.paddr;
+		for (i = 0; i < 256*3; i++) {
+			gamma_table_base[i] = (gamma_table_base[i] << 2)
+				| ((gamma_table_base[i] >> 6) & 0x03);
+		}
+	}
+
+	DPRINTF("update-lcdc: HW - %p\n Disabling DIU\n", hw);
+
+	/* Program DIU registers */
+
+	hw->gamma = (unsigned int) gamma.paddr;
+	hw->cursor= (unsigned int) cursor.paddr;
+	hw->bgnd = 0x007F7F7F;				/* BGND */
+	hw->bgnd_wb = 0; 				/* BGND_WB */
+	hw->disp_size = var->yres << 16 | var->xres;	/* DISP SIZE */
+	hw->wb_size = 0;				/* WB SIZE */
+	hw->wb_mem_addr = 0;				/* WB MEM ADDR */
+	hw->hsyn_para = var->left_margin << 22 |	/* BP_H */
+			var->hsync_len << 11   |	/* PW_H */
+			var->right_margin;		/* FP_H */
+	hw->vsyn_para = var->upper_margin << 22 |	/* BP_V */
+			var->vsync_len << 11    |	/* PW_V  */
+			var->lower_margin;		/* FP_V  */
+
+	/* Pixel Clock configuration */
+	DPRINTF("DIU: Bus Frequency = %d\n", get_busfreq());
+	speed_ccb = get_busfreq();
+
+	DPRINTF("DIU pixclock in ps - %d\n", var->pixclock);
+	temp = 1;
+	temp *= 1000000000;
+	temp /= var->pixclock;
+	temp *= 1000;
+	pixval = speed_ccb / temp;
+	DPRINTF("DIU pixval = %lu\n", pixval);
+
+	hw->syn_pol = 0;			/* SYNC SIGNALS POLARITY */
+	hw->thresholds = 0x00037800;		/* The Thresholds */
+	hw->int_status = 0;			/* INTERRUPT STATUS */
+	hw->int_mask = 0;			/* INT MASK */
+	hw->plut = 0x01F5F666;
+
+	/* Modify PXCLK in GUTS CLKDVDR */
+	DPRINTF("DIU: Current value of CLKDVDR = 0x%08x\n", *guts_clkdvdr);
+	temp = *guts_clkdvdr & 0x2000FFFF;
+	*guts_clkdvdr = temp;				/* turn off clock */
+	*guts_clkdvdr = temp | 0x80000000 | ((pixval & 0x1F) << 16);
+	DPRINTF("DIU: Modified value of CLKDVDR = 0x%08x\n", *guts_clkdvdr);
+
+	fb_initialized = 1;
+
+	if (splash_bmp) {
+		info->logo_height = fsl_diu_display_bmp(splash_bmp, 0, 0, 0);
+		info->logo_size = info->logo_height * info->line_length;
+		DPRINTF("logo height %d, logo_size 0x%x\n",
+			info->logo_height,info->logo_size);
+	}
+
+	/* Enable the DIU */
+	fsl_diu_enable_panel(info);
+	enable_lcdc();
+
+	return 0;
+}
+
+char *fsl_fb_open(struct fb_info **info)
+{
+	*info = &fsl_fb_info;
+	return (char *) ((unsigned int)(*info)->screen_base
+			 + (*info)->logo_size);
+}
+
+void fsl_diu_close(void)
+{
+	struct fb_info *info = &fsl_fb_info;
+	fsl_diu_disable_panel(info);
+}
+
+static int fsl_diu_enable_panel(struct fb_info *info)
+{
+	struct diu *hw = dr.diu_reg;
+	struct diu_ad *ad = &fsl_diu_fb_ad;
+
+	DPRINTF("Entered: enable_panel\n");
+	if (hw->desc[0] != (unsigned int)ad)
+		hw->desc[0] = (unsigned int)ad;
+	DPRINTF("desc[0] = 0x%x\n", hw->desc[0]);
+	return 0;
+}
+
+static int fsl_diu_disable_panel(struct fb_info *info)
+{
+	struct diu *hw = dr.diu_reg;
+
+	DPRINTF("Entered: disable_panel\n");
+	if (hw->desc[0] != (unsigned int)&dummy_ad)
+		hw->desc[0] = (unsigned int)&dummy_ad;
+	return 0;
+}
+
+static int map_video_memory(struct fb_info *info, unsigned long bytes_align)
+{
+	unsigned long offset;
+	unsigned long mask;
+
+	DPRINTF("Entered: map_video_memory\n");
+	/* allocate maximum 1280*1024 with 32bpp */
+	info->smem_len = 1280 * 4 *1024 + bytes_align;
+	DPRINTF("MAP_VIDEO_MEMORY: smem_len = %d\n", info->smem_len);
+	info->screen_base = malloc(info->smem_len);
+	if (info->screen_base == NULL) {
+		printf("Unable to allocate fb memory\n");
+		return -1;
+	}
+	info->smem_start = (unsigned int) info->screen_base;
+	mask = bytes_align - 1;
+	offset = (unsigned long)info->screen_base & mask;
+	if (offset) {
+		info->screen_base += offset;
+		info->smem_len = info->smem_len - (bytes_align - offset);
+	} else
+		info->smem_len = info->smem_len - bytes_align;
+
+	info->screen_size = info->smem_len;
+
+	DPRINTF("Allocated fb @ 0x%08lx, size=%d.\n",
+		info->smem_start, info->smem_len);
+
+	return 0;
+}
+
+static void enable_lcdc(void)
+{
+	struct diu *hw = dr.diu_reg;
+
+	DPRINTF("Entered: enable_lcdc, fb_enabled = %d\n", fb_enabled);
+	if (!fb_enabled) {
+		hw->diu_mode = dr.mode;
+		fb_enabled++;
+	}
+	DPRINTF("diu_mode = %d\n", hw->diu_mode);
+}
+
+static void disable_lcdc(void)
+{
+	struct diu *hw = dr.diu_reg;
+
+	DPRINTF("Entered: disable_lcdc, fb_enabled = %d\n", fb_enabled);
+	if (fb_enabled) {
+		hw->diu_mode = 0;
+		fb_enabled = 0;
+	}
+}
+
+static u32 get_busfreq(void)
+{
+	u32 fs_busfreq = 0;
+
+	fs_busfreq = get_bus_freq(0);
+	return fs_busfreq;
+}
+
+/*
+ * Align to 64-bit(8-byte), 32-byte, etc.
+ */
+static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+{
+	u32 offset, ssize;
+	u32 mask;
+
+	DPRINTF("Entered: allocate_buf\n");
+	ssize = size + bytes_align;
+	buf->paddr = malloc(ssize);
+	if (!buf->paddr)
+		return -1;
+
+	memset(buf->paddr, 0, ssize);
+	mask = bytes_align - 1;
+	offset = (u32)buf->paddr & mask;
+	if (offset) {
+		buf->offset = bytes_align - offset;
+		buf->paddr = (unsigned char *) ((u32)buf->paddr + offset);
+	} else
+		buf->offset = 0;
+	return 0;
+}
+
+int fsl_diu_display_bmp(unsigned char *bmp,
+			int xoffset,
+			int yoffset,
+			int transpar)
+{
+	struct fb_info *info = &fsl_fb_info;
+	unsigned char r, g, b;
+	unsigned int *fb_t, val;
+	unsigned char *bitmap;
+	unsigned int palette[256];
+	int width, height, bpp, ncolors, raster, offset, x, y, i, k, cpp;
+
+	if (!bmp) {
+		printf("Must supply a bitmap address\n");
+		return 0;
+	}
+
+	raster = bmp[10] + (bmp[11] << 8) + (bmp[12] << 16) + (bmp[13] << 24);
+	width  = (bmp[21] << 24) | (bmp[20] << 16) | (bmp[19] << 8) | bmp[18];
+	height = (bmp[25] << 24) | (bmp[24] << 16) | (bmp[23] << 8) | bmp[22];
+	bpp  = (bmp[29] <<  8) | (bmp[28]);
+	ncolors = bmp[46] + (bmp[47] << 8) + (bmp[48] << 16) + (bmp[49] << 24);
+	bitmap   = bmp + raster;
+	cpp = info->var.bits_per_pixel / 8;
+
+	DPRINTF("bmp = 0x%08x\n", (unsigned int)bmp);
+	DPRINTF("bitmap = 0x%08x\n", (unsigned int)bitmap);
+	DPRINTF("width = %d\n", width);
+	DPRINTF("height = %d\n", height);
+	DPRINTF("bpp = %d\n", bpp);
+	DPRINTF("ncolors = %d\n", ncolors);
+
+	DPRINTF("xres = %d\n", info->var.xres);
+	DPRINTF("yres = %d\n", info->var.yres);
+	DPRINTF("Screen_base = 0x%x\n", (unsigned int)info->screen_base);
+
+	if (((width+xoffset) > info->var.xres) ||
+	    ((height+yoffset) > info->var.yres)) {
+		printf("bitmap is out of range, image too large or too much offset\n");
+		return 0;
+	}
+	if (bpp < 24) {
+		for (i = 0, offset = 54; i < ncolors; i++, offset += 4)
+			palette[i] = (bmp[offset+2] << 16)
+				+ (bmp[offset+1] << 8) + bmp[offset];
+	}
+
+	switch (bpp) {
+	case 1:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x += 8) {
+				b = *bitmap++;
+				for (k = 0; k < 8; k++) {
+					if (b & 0x80)
+						*fb_t = palette[1];
+					else
+						*fb_t = palette[0];
+					b = b << 1;
+				}
+			}
+			for (i = (width / 2) % 4; i > 0; i--)
+				bitmap++;
+		}
+		break;
+	case 4:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x += 2) {
+				b = *bitmap++;
+				r = (b >> 4) & 0x0F;
+				g =  b & 0x0F;
+				*fb_t++ = palette[r];
+				*fb_t++ = palette[g];
+			}
+			for (i = (width / 2) % 4; i > 0; i--)
+				bitmap++;
+		}
+		break;
+	case 8:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x++) {
+				*fb_t++ = palette[ *bitmap++ ];
+			}
+			for (i = (width / 2) % 4; i > 0; i--)
+				bitmap++;
+		}
+		break;
+	case 24:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x++) {
+				b = *bitmap++;
+				g = *bitmap++;
+				r = *bitmap++;
+				val = (r << 16) + (g << 8) + b;
+				*fb_t++ = val;
+			}
+			for (; (x % 4) != 0; x++)	/* 4-byte alignment */
+				bitmap++;
+		}
+		break;
+	}
+
+	return height;
+}
+
+void fsl_diu_clear_screen(void)
+{
+	struct fb_info *info = &fsl_fb_info;
+
+	memset(info->screen_base, 0, info->smem_len);
+}
+#endif /* CONFIG_FSL_DIU_FB */
diff --git a/board/freescale/common/fsl_diu_fb.h b/board/freescale/common/fsl_diu_fb.h
new file mode 100644
index 000000000..6deba3275
--- /dev/null
+++ b/board/freescale/common/fsl_diu_fb.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+struct fb_var_screeninfo {
+	unsigned int xres;		/* visible resolution		*/
+	unsigned int yres;
+
+	unsigned int bits_per_pixel;	/* guess what			*/
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	unsigned int pixclock;		/* pixel clock in ps (pico seconds) */
+	unsigned int left_margin;	/* time from sync to picture	*/
+	unsigned int right_margin;	/* time from picture to sync	*/
+	unsigned int upper_margin;	/* time from sync to picture	*/
+	unsigned int lower_margin;
+	unsigned int hsync_len;		/* length of horizontal sync	*/
+	unsigned int vsync_len;		/* length of vertical sync	*/
+	unsigned int sync;		/* see FB_SYNC_*		*/
+	unsigned int vmode;		/* see FB_VMODE_*		*/
+	unsigned int rotate;		/* angle we rotate counter clockwise */
+};
+
+struct fb_info {
+	struct fb_var_screeninfo var;	/* Current var */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	unsigned int smem_len;		/* Length of frame buffer mem */
+	unsigned int type;		/* see FB_TYPE_*		*/
+	unsigned int line_length;	/* length of a line in bytes    */
+
+	char *screen_base;
+	unsigned long screen_size;
+	int logo_height;
+	unsigned int logo_size;
+};
+
+
+extern char *fsl_fb_open(struct fb_info **info);
+extern int fsl_diu_init(int xres,
+			unsigned int pixel_format,
+			int gamma_fix,
+			unsigned char *splash_bmp);
+extern void fsl_diu_clear_screen(void);
+extern int fsl_diu_display_bmp(unsigned char *bmp,
+			       int xoffset,
+			       int yoffset,
+			       int transpar);
diff --git a/board/freescale/common/fsl_logo_bmp.c b/board/freescale/common/fsl_logo_bmp.c
new file mode 100644
index 000000000..956dbee9d
--- /dev/null
+++ b/board/freescale/common/fsl_logo_bmp.c
@@ -0,0 +1,878 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*---------------------------------------------------------------------------
+ * FSL_Logo_BMP --
+ *
+ * A 340x128x4bpp BMP logo.
+ *---------------------------------------------------------------------------
+ */
+unsigned int FSL_Logo_BMP[] = {
+0x424d765c,
+0x00000000,0x00007600,0x00002800,0x00006c01,0x00008000,0x00000100,0x04000000,
+0x0000005c,0x0000130b,0x0000130b,0x00001000,0x00000000,0x00000402,0x04000d91,
+0xbc000b51,0x67001536,0x9a000f2a,0x4b005050,0x50009090,0x90000c70,0x92002e2f,
+0x2e00cfcf,0xcf007c82,0x7c00fbfd,0xfb006f70,0x6f00b0b0,0xb00004bd,0xfa000542,
+0xf9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xa9996500,0x0000a999,
+0xa80000aa,0x400006a0,0x00086500,0x86500008,0x699da800,0x0000c999,0x68000056,
+0x5000006a,0x00000a99,0x9a0c6800,0x08699685,0xa5000086,0x99dc4000,0x05999800,
+0x08699dc0,0x0000a600,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000008b,0xbb99bbd4,0x004bbb99,0xbba0009b,0x50000bb4,0x0008b900,
+0x5b90005b,0xbb99bbc0,0x0009bb99,0xbb60005b,0xd00000bb,0x0004bbbb,0xbbb9ba00,
+0x4bbbbbbd,0xbd000cbb,0xb9bbb500,0x0cbbba00,0x5bbb9bbb,0x5000db50,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000006b,0x980006bd,
+0x006b9800,0x89ba006b,0x600009b5,0x0000bb00,0x4bb000bb,0xd00059bc,0x006b9800,
+0x89bd008b,0xb00000db,0x5006bb50,0x089bbd00,0x5bbc086b,0xb9000bb6,0x00059b50,
+0x0cbd0000,0xbb6000c9,0xb500dba0,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000009b,0xa00008bb,0x80bb5000,0x00bb805b,0xd00006ba,
+0x00009b50,0x09b405bb,0x000008bb,0x409bc000,0x049bc009,0xb000006b,0xa009b600,
+0x0009b900,0x5b900005,0xbb005bb0,0x00005bb0,0x08b90005,0xbb00000c,0xb900cbd0,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000005c,
+0x800008bb,0x80bb8000,0x0088008b,0x90000cbd,0x0000dbc0,0x0db505b9,0x0000006d,
+0x50bb8000,0x005b9009,0xb50000cb,0xd00bb500,0x0008bb00,0x8b900000,0x9b50cb90,
+0x000006d5,0x00bb000c,0xbd000000,0x9bc08b90,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00ca9bbb,0x00bb5585,0x8558500b,
+0xb00008b9,0x0000cbd0,0x06ba05bb,0x00000000,0x00bb5000,0x000bb806,0xba00008b,
+0x9009b500,0x00009b50,0x0bb00000,0xdbc05b90,0x00000000,0x009b500c,0xb9000000,
+0xcb900bb0,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0xdbbbbb68,0x009bbbbb,0xbbbbb009,0xb50000bb,0x00008b90,0x05b900bb,
+0x40000000,0x009bc000,0x0009bc0c,0xbd00000b,0xb009ba00,0x00006bc0,0x09b50000,
+0xcb608bb0,0x00000000,0x00dbc008,0xbb000000,0x8bb009b8,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000005,0xbb9c8000,0x00cb9555,
+0xc55bb406,0xba00009b,0x50000bb0,0x08bb009b,0xc0000000,0x00abd000,0x000dbc08,
+0xbb00000d,0xb50cb900,0x0000abd0,0x0dbc0000,0x8b9009b5,0x00000000,0x00cbd000,
+0xbb500000,0x8bb006b6,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000000c,0xbd000059,0xa08bb800,0x008bb00c,0xb90000db,0xa00009b8,
+0x009b40cb,0x90000089,0x900bb800,0x0009bc00,0xbb50000d,0xbc00bb50,0x0000db90,
+0x0cb60000,0x0bb00cb9,0x00000899,0x008b9000,0xab900000,0x8bb00cbb,0x80000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000008,0xb90000ab,
+0x900ab940,0x00ab9008,0xbb60009b,0xbc000bb8,0x009b5009,0xbd00006b,0xb00cbb80,
+0x005bb800,0xdb950009,0xba00cbb5,0x0005bbb0,0x08b90000,0x09b8009b,0xd00006b9,
+0x000bb000,0x09bd0000,0xdb9005bb,0x9c880000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xdb96cdbb,0xc000db96,0xcdbbc000,0xbbb999bb,
+0x6b9dbbb4,0x006bc000,0x9b96cdbb,0xc0006bb6,0xc69bd000,0x6bbb9dbb,0xb50006bb,
+0x96db9bb8,0x00bb0000,0x0dbc0049,0xb9acdbbc,0x069bb995,0x089b9aad,0xbb5000bb,
+0xdbbb0000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x059bbb9c,0x00000c9b,0xbbbc0000,0xd98dbbb6,0x059bbb50,0x00596000,0x0c9bbb9c,
+0x0000089b,0xbbb60000,0xc96c9bbb,0x6000005d,0xbbb9cdbc,0x00998000,0x0c960000,
+0xa9bbb9c0,0x0a9bbb9a,0x000a9bbb,0x950000d9,0x8c9b5000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00008400,0x00000000,0x84000000,
+0x00004800,0x00048000,0x00000000,0x00048800,0x00000000,0x88000000,0x00000880,
+0x00000000,0x08800cb6,0x00000000,0x00000000,0x00488000,0x000ab600,0x00000488,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000005b9,0x00000000,
+0x00000000,0x00000000,0x0005b900,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x000000bb,0x00000000,0x00000000,0x00000000,0x0000bb00,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000a9c00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000009b,
+0x80000000,0x00000000,0x00000000,0x0000cc00,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x000cbd00,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000000db,0x50000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0004c500,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0000005c,0x50000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x008a66d6,0x6a580000,0x00000000,0x00000000,0x000008c6,
+0xd6d6a580,0x00000000,0x00000000,0x000008ca,0x6d6d6a58,0x00000000,0x00000000,
+0x00000004,0x5a6d6da5,0x80000000,0x00000000,0x00008c6d,0x66c50000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x005cad6d,0x6a580000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00033400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000009,
+0x99d9999d,0x50000000,0x00a999d9,0x99960000,0x00000000,0x00000008,0xdbbbbbbb,
+0xbbbb9650,0x00000000,0x00000000,0x008dbbbb,0xbbbbbbb9,0x65000000,0x00000000,
+0x005dbbbb,0xbbbbbbbb,0x96800000,0x00000000,0x00000c9b,0xbbbbbbbb,0xb9640000,
+0x00000000,0x00c9bbbb,0xbbbbbd80,0x00c999d9,0x99980000,0x06999d99,0x99600000,
+0x00000008,0x6bbbbbbb,0xbbbb9d50,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x04ffff30,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000009,0xbbbbbbbb,0xd0000000,0x00cbbbbb,
+0xbbbb0000,0x00000000,0x000004db,0xbbbbbbbb,0xbbbbbbb9,0x50000000,0x00000000,
+0x06bbbbbb,0xbbbbbbbb,0xbb950000,0x00000000,0x59bbbbbb,0xbbbbbbbb,0xbbb95000,
+0x00000000,0x00059bbb,0xbbbbbbbb,0xbbbb6800,0x00000000,0x89bbbbbb,0xbbbbbbb9,
+0x806bbbbb,0xbbb40000,0x0abbbbbb,0xbbb00000,0x0000006b,0xbbbbbbbb,0xbbbbbbb9,
+0x50000000,0x00000000,0x00000000,0x00000000,0x00000004,0xffffffff,0x40000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0000000d,0xbbbbbbbb,0x90000000,0x005bbbbb,0xbbbb8000,0x00000000,0x000089bb,
+0xbbbbbbbb,0xbbbbbbbb,0xbd800000,0x00000008,0x9bbbbbbb,0xbbbbbbbb,0xbbbb9800,
+0x0000000d,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x00cbbbbb,0xbbbbbbbb,
+0xbbbbbbc0,0x00000000,0xdbbbbbbb,0xbbbbbbbb,0xba6bbbbb,0xbbb80000,0x05bbbbbb,
+0xbbb40000,0x000009bb,0xbbbbbbbb,0xbbbbbbbb,0xb9800000,0x00000000,0x00000000,
+0x00000000,0x000004ff,0xffffffff,0xf3400000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x0000000a,0xbbbbbbbb,0xb0000000,
+0x008bbbbb,0xbbbbc000,0x00000000,0x0000bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb950000,
+0x00000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbc0,0x0000089b,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbb98,0x00000000,0x0abbbbbb,0xbbbbbbbb,0xbbbbbbbd,0x4000000c,0xbbbbbbbb,
+0xbbbbbbbb,0xbb9bbbbb,0xbbb80000,0x08bbbbbb,0xbbb50000,0x00049bbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbc0000,0x00000000,0x00000000,0x00000000,0x0004ffff,0xffffffff,
+0xfff30000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000005,0xbbbbbbbb,0xb8000000,0x0009bbbb,0xbbbb6000,0x00000000,
+0x0009bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbc000,0x000000db,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbb6,0x000089bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x80000000,0x8bbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0x95000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbb50000,
+0x00bbbbbb,0xbbb60000,0x0006bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbba000,0x00000000,
+0x00000000,0x00000000,0x043fffff,0xffffffff,0xfffff400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xbbbbbbbb,
+0xbc000000,0x000dbbbb,0xbbbb9000,0x00000000,0x005bbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbc00,0x000008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x60009bbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0x90000000,0x9bbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb80000b,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbc0000,0x009bbbbb,0xbbbd0000,0x008bbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x00000000,0x00000000,0x003fffff,
+0xffffffff,0xfffffff0,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xbbbbbbbb,0xb6000000,0x000abbbb,0xbbbbb000,
+0x00000000,0x009bbbbb,0xbbbbbb65,0x5569bbbb,0xbbbbbbc0,0x00000dbb,0xbbbbbbbb,
+0xb6c5569b,0xbbbbbbbb,0xba08bbbb,0xbbbbbbbb,0x96c55c6b,0xbbbbbbbb,0xb6000005,
+0xbbbbbbbb,0xbbbbbddd,0x9bbbbbbb,0xbbb8004b,0xbbbbbbbb,0xb9655cdb,0xbbbbbbbb,
+0xbbbd0000,0x006bbbbb,0xbbbb0000,0x00dbbbbb,0xbbbbbbdc,0x8c69bbbb,0xbbbbbbc0,
+0x00000000,0x00000000,0x00000000,0x0004ffff,0xffffffff,0xffffffff,0x30000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0xdbbbbbbb,0xb9000000,0x0005bbbb,0xbbbbb800,0x00000000,0x00bbbbbb,0xbbbbd000,
+0x0000cbbb,0xbbbbbbb8,0x00000bbb,0xbbbbbbb9,0x0000000c,0xbbbbbbbb,0xbb5006bb,
+0xbbbbbbd8,0x00000000,0x6bbbbbbb,0xbb400006,0xbbbbbbbb,0xbbb50000,0x08dbbbbb,
+0xbbb9000b,0xbbbbbbbb,0x94000008,0xdbbbbbbb,0xbbb90000,0x00cbbbbb,0xbbbb4000,
+0x00bbbbbb,0xbbbbd400,0x0000cbbb,0xbbbbbbb5,0x00000000,0x00000000,0x00000000,
+0x000004ff,0xffffffff,0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x6bbbbbbb,0xbb000000,0x0008bbbb,
+0xbbbbb500,0x00000000,0x0cbbbbbb,0xbbb90000,0x000008bb,0xbbbbbb95,0x00008bbb,
+0xbbbbbb98,0x00000000,0x49bbbbbb,0xbbc0008d,0xbbbbb500,0x00000000,0x0dbbbbbb,
+0xbbc0000b,0xbbbbbbbb,0xbb800000,0x0005bbbb,0xbb98000b,0xbbbbbbbb,0xc0000000,
+0x06bbbbbb,0xbbbb0000,0x008bbbbb,0xbbbb5000,0x08bbbbbb,0xbbb98000,0x0000089b,
+0xbbbbbbbc,0x00000000,0x00000000,0x00000000,0x00000043,0xffffffff,0xffffffff,
+0xfff34000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x5bbbbbbb,0xbb800000,0x0000bbbb,0xbbbbb600,0x00000000,0x0abbbbbb,
+0xbbb50000,0x00000009,0xbbbbbc00,0x0000cbbb,0xbbbbbbc0,0x00000000,0x089bbbbb,
+0xa0000000,0xc9bb8000,0x00000000,0x05bbbbbb,0xbb90000b,0xbbbbbbbb,0xbc000000,
+0x00005bbb,0x95000009,0xbbbbbbbb,0x50000000,0x009bbbbb,0xbbbb5000,0x000bbbbb,
+0xbbbba000,0x0cbbbbbb,0xbbbc0000,0x00000049,0xbbbbba00,0x00000000,0x00000000,
+0x00000000,0x00000000,0x4fffffff,0xffffffff,0xfffff300,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x8bbbbbbb,0xbb500000,
+0x0000dbbb,0xbbbbb900,0x00000000,0x06bbbbbb,0xbbb00000,0x00000004,0xbbbc0000,
+0x0000abbb,0xbbbbbb40,0x00000000,0x0089bba0,0x00000000,0x00680000,0x00000000,
+0x0abbbbbb,0xbbb0008b,0xbbbbbbbb,0xb8000000,0x00000695,0x0000000c,0xbbbbbbbb,
+0xd0000000,0x008bbbbb,0xbbbbc000,0x0009bbbb,0xbbbbd000,0x0cbbbbbb,0xbbb40000,
+0x00000008,0x9bb60000,0x00000000,0x00000000,0x00000000,0x00000000,0x003fffff,
+0xffffffff,0xffff3400,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0bbbbbbb,0xbb600000,0x00006bbb,0xbbbbb900,0x00000000,
+0x0dbbbbbb,0xbb900000,0x00000000,0x8c000000,0x00006bbb,0xbbbbbb00,0x00000000,
+0x0008a400,0x00000000,0x00000000,0x00000008,0x6bbbbbbb,0xbbb5005b,0xbbbbbbbb,
+0x90000000,0x00000000,0x00000008,0xbbbbbbbb,0xb8000000,0x000dbbbb,0xbbbb6000,
+0x000dbbbb,0xbbbb9000,0x0abbbbbb,0xbbb00000,0x00000000,0x06000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00003fff,0xffffffff,0xfff40000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0dbbbbbb,
+0xbbd00000,0x00005bbb,0xbbbbbb80,0x00000000,0x06bbbbbb,0xbb900000,0x00000000,
+0x00000000,0x0000abbb,0xbbbbbb00,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0005ad9b,0xbbbbbbbb,0xbbb5008b,0xbbbbbbbb,0x90000000,0x00000000,0x00000000,
+0xdbbbbbbb,0xb9500000,0x000cbbbb,0xbbbb9000,0x000cbbbb,0xbbbbb400,0x0cbbbbbb,
+0xbbb00000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000004ff,0xffffffff,0xf4000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x06bbbbbb,0xbbb00000,0x00008bbb,0xbbbbbb50,
+0x00000000,0x06bbbbbb,0xbbb00000,0x00000000,0x00000000,0x0000cbbb,0xbbbbbb00,
+0x00000000,0x00000000,0x00000000,0x00000045,0xd9bbbbbb,0xbbbbbbbb,0xbbb5008b,
+0xbbbbbbbb,0x90000000,0x00000000,0x00000000,0x0bbbbbbb,0xbbb95400,0x0004bbbb,
+0xbbbbb000,0x0008bbbb,0xbbbbb800,0x0cbbbbbb,0xbbb00000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,0xfffffff4,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0cbbbbbb,0xbbb80000,0x00000bbb,0xbbbbbb60,0x00000000,0x0cbbbbbb,0xbbbddddd,
+0xdddddddd,0xdddddddd,0xd8005bbb,0xbbbbbbdd,0xdddddddd,0xdddddddd,0xdddd8000,
+0x00008dbb,0xbbbbbbbb,0xbbbbbbbb,0xbbb4000b,0xbbbbbbbb,0x90000000,0x00000000,
+0x00000000,0x05bbbbbb,0xbbbbbb96,0x5000bbbb,0xbbbbb800,0x0000bbbb,0xbbbbba00,
+0x05bbbbbb,0xbbb9dddd,0xdddddddd,0xdddddddd,0xd8000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x43fff400,0x00000000,0x0007e140,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x08bbbbbb,0xbbb50000,0x000009bb,
+0xbbbbbbd0,0x00000000,0x08bbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb8004bbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbc000,0x0006bbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbd0000b,0xbbbbbbbb,0xb0000000,0x00000000,0x00000000,0x00cbbbbb,0xbbbbbbbb,
+0xbb9c9bbb,0xbbbbbc00,0x00009bbb,0xbbbbbd00,0x00bbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbc000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00440000,
+0x00000000,0x07eeeee2,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00bbbbbb,0xbbba0000,0x000006bb,0xbbbbbbb0,0x00000000,0x00bbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbc000bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbb6000,0x00dbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb980000d,0xbbbbbbbb,0xb0000000,
+0x00000000,0x00000000,0x00089bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbb600,0x0000dbbb,
+0xbbbbb900,0x00bbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb6000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000002,0xeeeeeeee,0x12000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x009bbbbb,0xbbbd0000,
+0x00000cbb,0xbbbbbbb0,0x00000000,0x009bbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xb6000dbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbb6000,0x0cbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0x94000006,0xbbbbbbbb,0xbc000000,0x00000000,0x00000000,0x00000cbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbb900,0x0000cbbb,0xbbbbbb00,0x006bbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xb6000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x000002ee,0xeeeeeeee,0xee140000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x006bbbbb,0xbbb90000,0x000008bb,0xbbbbbbb5,0x00000000,
+0x00abbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb60005bb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbb9000,0x09bbbbbb,0xbbbbbbbb,0xbbbbbb9c,0x00000008,0xbbbbbbbb,
+0xbd000000,0x00000000,0x00000000,0x00000005,0x9bbbbbbb,0xbbbbbbbb,0xbbbbbb00,
+0x00005bbb,0xbbbbbb80,0x00cbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb9000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0002eeee,0xeeeeeeee,
+0xeeee7000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00cbbbbb,
+0xbbbb8000,0x000000bb,0xbbbbbbb6,0x00000000,0x008bbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xb60008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbd000,0x0bbbbbbb,
+0xbbbbbbbb,0xbbb96800,0x00000000,0xbbbbbbbb,0xbb000000,0x00000000,0x00000000,
+0x00000000,0x00cd9bbb,0xbbbbbbbb,0xbbbbbb80,0x00000bbb,0xbbbbbbc0,0x000bbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbd000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x001eeeee,0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x008bbbbb,0xbbbb5000,0x0000009b,0xbbbbbbbb,
+0x00000000,0x0009bbbb,0xbbbb5888,0x88888888,0xcbbbbbbb,0xbd0000db,0xbbbbbbbc,
+0x88888888,0x8885bbbb,0xbbbb9000,0x0bbbbbbb,0xbbbbbb96,0xc8000000,0x00000000,
+0x6bbbbbbb,0xbbc00000,0x00000000,0x00000000,0x00000000,0x0000045c,0x69bbbbbb,
+0xbbbbbbc0,0x000009bb,0xbbbbbb60,0x000dbbbb,0xbbbbc888,0x88888888,0x5bbbbbbb,
+0xb9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0047eeee,
+0xeeeeeeee,0xeeeeeee1,0x40000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000bbbbb,0xbbbba000,0x000000db,0xbbbbbbbb,0xd0000000,0x000cbbbb,0xbbbb6000,
+0x00000000,0x8bbbbbbb,0xb600005b,0xbbbbbbbd,0x00000000,0x0008bbbb,0xbbbbd000,
+0x0bbbbbbb,0xbbb9c000,0x00000000,0x00000000,0x8bbbbbbb,0xbb900000,0x0000000d,
+0x50000000,0x00000000,0x00000000,0x00008dbb,0xbbbbbb60,0x00000dbb,0xbbbbbb90,
+0x0005bbbb,0xbbbbd000,0x00000000,0x8bbbbbbb,0xbd000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000041ee,0xeeeeeeee,0xeeeeeeee,0xe2000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x0009bbbb,0xbbbbd000,0x000000cb,
+0xbbbbbbbb,0xb9500000,0x00009bbb,0xbbbbb800,0x00000000,0x5bbbbbbb,0xb6000009,
+0xbbbbbbbb,0x50000000,0x0008bbbb,0xbbbbd000,0x0dbbbbbb,0xbb980000,0x00000000,
+0x00000000,0x06bbbbbb,0xbbbd0000,0x0000004b,0xb9800000,0x00000000,0x00000000,
+0x00000cbb,0xbbbbbbd0,0x00000abb,0xbbbbbbb0,0x00009bbb,0xbbbbb500,0x00000000,
+0x8bbbbbbb,0xbd000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00043000,
+0x0000002e,0xeeeeeeee,0xeeeeeeee,0xee120000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x000dbbbb,0xbbbb9000,0x0000008b,0xbbbbbbbb,0xbbb9da58,0x0000cbbb,
+0xbbbbb980,0x00000000,0xdbbbbbbb,0xbc000005,0xbbbbbbbb,0xb0000000,0x0006bbbb,
+0xbbbba000,0x0cbbbbbb,0xbbd00000,0x000000cb,0x50000000,0x08bbbbbb,0xbbbb5000,
+0x0000006b,0xbbb60000,0x0006bbbb,0xbbbb6000,0x000008bb,0xbbbbbbb0,0x000005bb,
+0xbbbbbbb8,0x00005bbb,0xbbbbb980,0x00000000,0x6bbbbbbb,0xba000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x043fff30,0x00000000,0x1eeeeeee,0xeeeeeeee,
+0xeeee1400,0x00000000,0x00000000,0x00000000,0x00000000,0x000cbbbb,0xbbbbb000,
+0x0000000b,0xbbbbbbbb,0xbbbbbbbb,0xb50009bb,0xbbbbbb98,0x00000005,0xbbbbbbbb,
+0xb8000000,0xdbbbbbbb,0xbb800000,0x005bbbbb,0xbbbb5000,0x04bbbbbb,0xbbb00000,
+0x000006bb,0xbd800000,0x00cbbbbb,0xbbbbb600,0x00000cbb,0xbbbbb500,0x0005bbbb,
+0xbbbbb400,0x000000bb,0xbbbbbbb4,0x000004bb,0xbbbbbbbc,0x00000dbb,0xbbbbbb95,
+0x00000008,0xbbbbbbbb,0xb5000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x3fffffff,0x40000000,0x04eeeeee,0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,
+0x00000000,0x00000008,0x888cbbbb,0xbbbbbc88,0x88800009,0xbbbbbbbb,0xbbbbbbbb,
+0xba0008bb,0xbbbbbbbb,0x680008ab,0xbbbbbbbb,0x90000000,0x89bbbbbb,0xbbb68000,
+0x0cbbbbbb,0xbbbb0000,0x006bbbbb,0xbbb95000,0x0056bbbb,0xbbb60000,0x0009bbbb,
+0xbbbbbbb6,0x588c9bbb,0xbbbbbb90,0x0000bbbb,0xbbbbbd00,0x000005bb,0xbbbbbbb8,
+0x0000009b,0xbbbbbbb6,0x000000bb,0xbbbbbbbb,0x680000cb,0xbbbbbbbb,0xb0000000,
+0x00000000,0x00000000,0x00000000,0x0000043f,0xffffffff,0xf3000000,0x0002eeee,
+0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,0x00000000,0x0000000b,0xbbbbbbbb,
+0xbbbbbbbb,0xbbb5000d,0xbbbbbbbb,0xbbbbbbbb,0xbd0000cb,0xbbbbbbbb,0xbb999bbb,
+0xbbbbbbbb,0x60000000,0x05bbbbbb,0xbbbbbb99,0xbbbbbbbb,0xbbbd0000,0x008bbbbb,
+0xbbbbbb99,0xbbbbbbbb,0xbbbb9c00,0x00009bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb90,
+0x0000cbbb,0xbbbbbb98,0x000089bb,0xbbbbbbb8,0x0000009b,0xbbbbbbb9,0x0000005b,
+0xbbbbbbbb,0xbbb99bbb,0xbbbbbbbb,0xd0000000,0x00000000,0x00000000,0x00000000,
+0x00003fff,0xffffffff,0xfff30000,0x000001ee,0xeeeeeeee,0xee140000,0x00000000,
+0x00000000,0x00000000,0x00000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbc000a,0xbbbbbbbb,
+0xbbbbbbbb,0xb9000006,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x40000000,0x00abbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbb80000,0x0005bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbd0,
+0x00008bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb50,0x000009bb,0xbbbbbbbb,0x9d99bbbb,
+0xbbbbbbb0,0x0000006b,0xbbbbbbbb,0x00000005,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0x80000000,0x00000000,0x00000000,0x00000000,0x003fffff,0xffffffff,0xfffff400,
+0x00000041,0xeeeeeeee,0x14000000,0x00000000,0x00000000,0x00000000,0x00000006,
+0xbbbbbbbb,0xbbbbbbbb,0xbbb60008,0xbbbbbbbb,0xbbbbbbbb,0xbb000000,0x6bbbbbbb,
+0xbbbbbbbb,0xbbbbbbbc,0x00000000,0x000abbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb600000,
+0x00005bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb50,0x0000049b,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbd00,0x000008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb90,0x0000005b,0xbbbbbbbb,
+0x80000000,0x5bbbbbbb,0xbbbbbbbb,0xbbbbbbb6,0x00005050,0x50500000,0x00000000,
+0x00000000,0x04ffffff,0xffffffff,0xffffff30,0x00000000,0x2eeeee14,0x00000000,
+0x00004400,0x00000000,0x00000000,0x0000000c,0xbbbbbbbb,0xbbbbbbbb,0xbbb90000,
+0xbbbbbbbb,0xbdbbbbbb,0xbb500000,0x05bbbbbb,0xbbbbbbbb,0xbbbbbb90,0x00000000,
+0x00005bbb,0xbbbbbbbb,0xbbbbbbbb,0xb9000000,0x000005bb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbb9000,0x0000000d,0xbbbbbbbb,0xbbbbbbbb,0xbbbb9000,0x0000005b,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbb50,0x0000008b,0xbbbbbbbb,0x50000000,0x05bbbbbb,0xbbbbbbbb,
+0xbbbbbb90,0x0008c068,0x98d00000,0x00000000,0x00000000,0x0004ffff,0xffffffff,
+0xffffffff,0x30000000,0x047e1400,0x00000000,0x0043ff34,0x00000000,0x00000000,
+0x00000008,0xbbbbbbbb,0xbbbbbbbb,0xbbbb0000,0x9bbbbbbb,0xb60a9bbb,0xbbc00000,
+0x008dbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x000000db,0xbbbbbbbb,0xbbbbbbbb,
+0xd8000000,0x0000008d,0xbbbbbbbb,0xbbbbbbbb,0xbb950000,0x00000000,0x59bbbbbb,
+0xbbbbbbbb,0xbbbd0000,0x00000004,0xdbbbbbbb,0xbbbbbbbb,0xbbbbbc00,0x00000009,
+0xbbbbbbbb,0x60000000,0x000dbbbb,0xbbbbbbbb,0xbbbbbd00,0x0008a06a,0xccd00000,
+0x00000000,0x00000000,0x000003ff,0xffffffff,0xffffffff,0xff400000,0x00040000,
+0x00000000,0x03ffffff,0x30000000,0x00000000,0x00000000,0xdddddbbb,0xbbbbbb9d,
+0xdddd8000,0xdbbbbbbb,0xb90005db,0xbb600000,0x00005dbb,0xbbbbbbbb,0xbbb95000,
+0x00000000,0x00000008,0xdbbbbbbb,0xbbbbbb9c,0x00000000,0x00000000,0x59bbbbbb,
+0xbbbbbbbb,0x95000000,0x00000000,0x00c9bbbb,0xbbbbbbbb,0xb9500000,0x00000000,
+0x059bbbbb,0xbbbbbbbb,0xbbb95000,0x00000009,0xbbbbbbbb,0xd0000000,0x00008dbb,
+0xbbbbbbbb,0xbbb9a000,0x0008a0dd,0x06d00000,0x00000000,0x00000000,0x00000043,
+0xffffffff,0xffffffff,0xfff34000,0x00000000,0x00000043,0xffffffff,0xff400000,
+0x00000000,0x00000000,0x000009bb,0xbbbbbbd0,0x00000000,0x8c5555c5,0x55000000,
+0x85500000,0x0000008c,0xd9bbbbbb,0x9d500000,0x00000000,0x00000000,0x00cd9bbb,
+0xbbb9d500,0x00000000,0x00000000,0x004cd9bb,0xbbbb9dc0,0x00000000,0x00000000,
+0x00005cdb,0xbbbbbb9a,0x50000000,0x00000000,0x0008cdbb,0xbbbbbbb9,0xda800000,
+0x00000006,0xbbbbbbbb,0xb0000000,0x0000000c,0xd9bbbbbb,0x9dc00000,0x0086dc6c,
+0x0cd00000,0x00000000,0x00000000,0x00000000,0x4fffffff,0xffffffff,0xfffff300,
+0x00000000,0x000003ff,0xffffffff,0xffff0000,0x00000000,0x00000000,0x00000dbb,
+0xbbbbbb90,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00008840,
+0x00000000,0x00000000,0x00000000,0x00000008,0x84000000,0x00000000,0x00000000,
+0x00000000,0x88400000,0x00000000,0x00000000,0x00000000,0x08880000,0x00000000,
+0x00000000,0x00000000,0x08888000,0x00000000,0x0000000c,0xbbbbbbbb,0xb8000000,
+0x00000000,0x00008880,0x00000000,0x00888480,0x00800000,0x00000000,0x00000000,
+0x00000000,0x003fffff,0xffffffff,0xfffff400,0x00000000,0x0003ffff,0xffffffff,
+0xfffff300,0x00000000,0x00000000,0x00000abb,0xbbbbbbb8,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000008,0xbbbbbbbb,0xb5000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00043fff,0xffffffff,
+0xfff30000,0x00000000,0x003fffff,0xffffffff,0xfffffff4,0x00000000,0x00000000,
+0x000005bb,0xbbbbbbbb,0x58040000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xbbbbbbbb,
+0xba000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x000004ff,0xffffffff,0xf3000000,0x00000000,0x00003fff,
+0xffffffff,0xffffffff,0x30000000,0x00000000,0x000000bb,0xbbbbbbbb,0xbbbbb500,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xdbbbbbbb,0xbd000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000003,
+0xfffffff3,0x00000000,0x00000000,0x000004ff,0xffffffff,0xffffffff,0xff300000,
+0x00000000,0x000000db,0xbbbbbbbb,0xbbbbba00,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x6bbbbbbb,0xb9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x43fff340,0x00000000,0x00021100,
+0x00000003,0xffffffff,0xffffffff,0xffff4000,0x00000000,0x0000008b,0xbbbbbbbb,
+0xbbbbbd00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0xcbbbbbbb,0xbb800000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00430000,0x00000000,0x021eeee2,0x00000000,0x03ffffff,0xffffffff,
+0xfffff300,0x00000000,0x0000000d,0xbbbbbbbb,0xbbbbb900,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x8bbbbbbb,0xbb500000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x1eeeeeee,0x14000000,0x004fffff,0xffffffff,0xffffff30,0x00000000,0x00000000,
+0x9bbbbbbb,0xbbbbbb00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0bbbbbbb,0xbba00000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000041e,0xeeeeeeee,0xee100000,0x00003fff,
+0xffffffff,0xffff3000,0x00000000,0x00000000,0x0dbbbbbb,0xbbbbbb50,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x09bbbbbb,0xbbd00000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00047eee,0xeeeeeeee,0xeeee2000,0x0000003f,0xffffffff,0xff300000,0x00000000,
+0x00000000,0x0059bbbb,0xbbbbbbc0,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x06bbbbbb,
+0xbb900000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x007eeeee,0xeeeeeeee,0xeeeee140,
+0x00000004,0xffffffff,0x30000000,0x00000000,0x00000000,0x00004c66,0xd66a5800,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00808480,0x84800000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0041eeee,0xeeeeeeee,0xeeeeeee7,0x00000000,0x03ffff34,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00002eee,0xeeeeeeee,
+0xeeeeeeee,0xe2000000,0x004f3400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000007e,0xeeeeeeee,0xeeeeeeee,0xee140000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x1eeeeeee,0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x02eeeeee,0xeeeeeeee,0xeeeeee40,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0007eeee,0xeeeeeeee,0xeeeee400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000041ee,0xeeeeeeee,
+0xeee20000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000002e,0xeeeeeeee,0xe2000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x7eeeeee2,0x00000000,0x00000400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x041ee700,0x00000000,0x0003ff30,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00040000,0x00000000,0x04ffffff,0x40000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000004ff,0xffffffff,0xfff30000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0004ffff,0xffffffff,0xfffff400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x004fffff,0xffffffff,0xfffffff4,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00043fff,0xffffffff,0xffffffff,0x30000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000004ff,0xffffffff,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00047700,0x00000003,0xffffffff,0xffffffff,0xffff4000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x001eeee4,0x00000000,
+0x4fffffff,0xffffffff,0xfffff300,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x7eeeeeee,0x14000000,0x004fffff,0xffffffff,0xffffff30,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000007e,0xeeeeeeee,
+0xee200000,0x00003fff,0xffffffff,0xffff3400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00002eee,0xeeeeeeee,0xeeee4000,0x000004ff,0xffffffff,
+0xfff40000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x002eeeee,
+0xeeeeeeee,0xeeeee140,0x00000004,0xffffffff,0xf4000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0041eeee,0xeeeeeeee,0xeeeeeee7,0x00000000,
+0x43fffff4,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00002eee,0xeeeeeeee,0xeeeeeeee,0x12000000,0x004ff400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00004000,0x0000007e,0xeeeeeeee,0xeeeeeeee,
+0xee100000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x004fff40,0x00000004,0x1eeeeeee,0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x4ffffff3,0x00000000,0x02eeeeee,
+0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000043,0xffffffff,0xf3000000,0x0001eeee,0xeeeeeeee,0xeeeee200,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x000043ff,0xffffffff,0xfff40000,
+0x00004eee,0xeeeeeeee,0xeee70000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0043ffff,0xffffffff,0xffff3400,0x0000002e,0xeeeeeeee,0xe7400000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00ffffff,0xffffffff,
+0xffffff30,0x00000000,0x1eeeeee7,0x40000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0003ffff,0xffffffff,0xffffffff,0x40000000,0x04eee140,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000003ff,
+0xffffffff,0xffffffff,0xf3000000,0x00024000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000004f,0xffffffff,0xffffffff,0xfff30000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x3fffffff,0xffffffff,0xfffff400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00ffffff,0xffffffff,
+0xfffff300,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0004ffff,0xffffffff,0xffff3000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000003ff,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000004f,0xffffffff,0x30000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x4fffff30,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x003f3000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000babe
+};
diff --git a/board/cds/common/ft_board.c b/board/freescale/common/ft_board.c
index 3eda1009e..6f221aff2 100644
--- a/board/cds/common/ft_board.c
+++ b/board/freescale/common/ft_board.c
@@ -21,24 +21,29 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 #include "cadmus.h"
 
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-
+#if defined(CONFIG_OF_BOARD_SETUP)
 static void cds_pci_fixup(void *blob)
 {
-	int len;
-	u32 *map;
-	int slot;
-	int i;
+	int node, tmp[2];
+	const char *path;
+	int len, slot, i;
+	u32 *map = NULL;
 
-	map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
-
-	if (!map)
-		map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len);
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			node = fdt_path_offset(blob, path);
+			if (node >= 0) {
+				map = fdt_getprop_w(blob, node, "interrupt-map", &len);
+			}
+		}
+	}
 
 	if (map) {
 		len /= sizeof(u32);
@@ -50,33 +55,18 @@ static void cds_pci_fixup(void *blob)
 			 * changes depending on the slot the carrier card is in.
 			 */
 			map[3] = ((map[3] + slot - 2) % 4) + 1;
-
 			map+=7;
 		}
-	} else {
-		printf("*** Warning - No PCI node found\n");
 	}
 }
-#endif
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 *p;
-	int len;
-
+	ft_cpu_setup(blob, bd);
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
-
 	cds_pci_fixup(blob);
+#endif
 }
 #endif
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index fd99a938c..45dcf4dab 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -207,13 +207,16 @@ void read_from_px_regs_altbank(int set)
 	out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
 }
 
+#ifndef CFG_PIXIS_VBOOT_MASK
+#define CFG_PIXIS_VBOOT_MASK	0x40
+#endif
 
 void set_altbank(void)
 {
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp ^= 0x40;
+	tmp ^= CFG_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }
diff --git a/board/cds/common/via.c b/board/freescale/common/via.c
index 4a63d7794..4a63d7794 100644
--- a/board/cds/common/via.c
+++ b/board/freescale/common/via.c
diff --git a/board/cds/common/via.h b/board/freescale/common/via.h
index 77cfacc52..77cfacc52 100644
--- a/board/cds/common/via.h
+++ b/board/freescale/common/via.h
diff --git a/board/freescale/m54455evb/u-boot.atm b/board/freescale/m54455evb/u-boot.atm
new file mode 100644
index 000000000..bda68e4f8
--- /dev/null
+++ b/board/freescale/m54455evb/u-boot.atm
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5445x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/freescale/m54455evb/u-boot.int b/board/freescale/m54455evb/u-boot.int
new file mode 100644
index 000000000..e480c2922
--- /dev/null
+++ b/board/freescale/m54455evb/u-boot.int
@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5445x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/freescale/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c
index 6bc35c70f..7818a2e1e 100644
--- a/board/freescale/mpc832xemds/pci.c
+++ b/board/freescale/mpc832xemds/pci.c
@@ -269,7 +269,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(hose[0].first_busno);
 		tmp[1] = cpu_to_be32(hose[0].last_busno);
diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c
index ae94a2f38..7bcdccbcc 100644
--- a/board/freescale/mpc8349emds/pci.c
+++ b/board/freescale/mpc8349emds/pci.c
@@ -396,7 +396,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
@@ -408,7 +408,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 				  tmp, sizeof(tmp[0]));
 	}
 #ifdef CONFIG_MPC83XX_PCI2
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c
index 5ca094d4c..a764a6186 100644
--- a/board/freescale/mpc8349itx/pci.c
+++ b/board/freescale/mpc8349itx/pci.c
@@ -342,7 +342,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
@@ -354,7 +354,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 				  tmp, sizeof(tmp[0]));
 	}
 #ifdef CONFIG_MPC83XX_PCI2
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c
index cf7ef9044..f18e532ef 100644
--- a/board/freescale/mpc8360emds/pci.c
+++ b/board/freescale/mpc8360emds/pci.c
@@ -269,7 +269,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(hose[0].first_busno);
 		tmp[1] = cpu_to_be32(hose[0].last_busno);
diff --git a/board/mpc8540ads/Makefile b/board/freescale/mpc8540ads/Makefile
index 29136508f..29136508f 100644
--- a/board/mpc8540ads/Makefile
+++ b/board/freescale/mpc8540ads/Makefile
diff --git a/board/mpc8540ads/config.mk b/board/freescale/mpc8540ads/config.mk
index 92f893197..92f893197 100644
--- a/board/mpc8540ads/config.mk
+++ b/board/freescale/mpc8540ads/config.mk
diff --git a/board/mpc8540ads/init.S b/board/freescale/mpc8540ads/init.S
index 544fde94c..544fde94c 100644
--- a/board/mpc8540ads/init.S
+++ b/board/freescale/mpc8540ads/init.S
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 914e51a76..35f5eeaf0 100644
--- a/board/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -30,11 +30,8 @@
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
 #include <spd.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -77,13 +74,12 @@ initdram(int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
+	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	    uint temp_ddrdll = 0;
 
 	    /*
@@ -125,9 +121,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -186,8 +181,7 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
@@ -282,8 +276,7 @@ int testdram (void)
 long int fixed_sdram (void)
 {
   #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 
 	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
 	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
@@ -331,22 +324,25 @@ pci_init_board(void)
 }
 
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 *p;
-	int len;
+	int node, tmp[2];
+	const char *path;
 
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
 	ft_cpu_setup(blob, bd);
 
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = hose.last_busno - hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
 	}
 }
 #endif
diff --git a/board/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds
index e7a88cfa4..a7c68b364 100644
--- a/board/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -35,7 +35,7 @@ SECTIONS
   .bootpg 0xFFFFF000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-    board/mpc8540ads/init.o (.bootpg)
+    board/freescale/mpc8540ads/init.o (.bootpg)
   } = 0xffff
 
   /* Read-only sections, merged into text segment: */
@@ -65,7 +65,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc85xx/start.o	(.text)
-    board/mpc8540ads/init.o (.text)
+    board/freescale/mpc8540ads/init.o (.text)
     cpu/mpc85xx/traps.o (.text)
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/cds/mpc8541cds/Makefile b/board/freescale/mpc8541cds/Makefile
index 7f5309885..7f5309885 100644
--- a/board/cds/mpc8541cds/Makefile
+++ b/board/freescale/mpc8541cds/Makefile
diff --git a/board/cds/mpc8541cds/config.mk b/board/freescale/mpc8541cds/config.mk
index 17cc8bce9..17cc8bce9 100644
--- a/board/cds/mpc8541cds/config.mk
+++ b/board/freescale/mpc8541cds/config.mk
diff --git a/board/cds/mpc8541cds/init.S b/board/freescale/mpc8541cds/init.S
index 978bda5e4..978bda5e4 100644
--- a/board/cds/mpc8541cds/init.S
+++ b/board/freescale/mpc8541cds/init.S
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 558ba9903..9ab98d4b6 100644
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -28,6 +28,8 @@
 #include <asm/immap_85xx.h>
 #include <ioports.h>
 #include <spd.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #include "../common/cadmus.h"
 #include "../common/eeprom.h"
@@ -203,8 +205,7 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
@@ -250,7 +251,6 @@ long int
 initdram(int board_type)
 {
 	long dram_size = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
@@ -263,7 +263,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur= &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -293,9 +293,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -344,8 +343,7 @@ sdram_init(void)
 #if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
 
 	uint idx;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -506,3 +504,31 @@ pci_init_board(void)
 	pci_mpc85xx_init(hose);
 #endif
 }
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	int node, tmp[2];
+	const char *path;
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI1
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = hose[0].last_busno - hose[0].first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_MPC85XX_PCI2
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = hose[1].last_busno - hose[1].first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+	}
+}
+#endif
diff --git a/board/cds/mpc8555cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds
index 9285928dc..4360d677e 100644
--- a/board/cds/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
   .bootpg 0xFFFFF000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8555cds/init.o (.bootpg)
+    board/freescale/mpc8541cds/init.o (.bootpg)
   } = 0xffff
 
   /* Read-only sections, merged into text segment: */
@@ -64,12 +64,12 @@ SECTIONS
   .text      :
   {
     cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8555cds/init.o (.text)
+    board/freescale/mpc8541cds/init.o (.text)
     cpu/mpc85xx/traps.o (.text)
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
-    drivers/tsec.o (.text)
+    drivers/net/tsec.o (.text)
     cpu/mpc85xx/speed.o (.text)
     cpu/mpc85xx/pci.o (.text)
     common/dlmalloc.o (.text)
diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S
index 68ccba746..084d4b80d 100644
--- a/board/freescale/mpc8544ds/init.S
+++ b/board/freescale/mpc8544ds/init.S
@@ -27,13 +27,6 @@
 #include <config.h>
 #include <mpc85xx.h>
 
-#define LAWAR_TRGT_PCI1		0x00000000
-#define LAWAR_TRGT_PCIE1	0x00200000
-#define LAWAR_TRGT_PCIE2	0x00100000
-#define LAWAR_TRGT_PCIE3	0x00300000
-#define LAWAR_TRGT_LBC		0x00400000
-#define LAWAR_TRGT_DDR		0x00f00000
-
 /*
  * TLB0 and TLB1 Entries
  *
@@ -212,31 +205,31 @@ law_entry:
 	.long (4f-3f)/8
 3:
 	.long	0
-	.long	(LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
+	.long	(LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
 
 	.long	(CFG_PCI1_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
 	.long	(CFG_PCI1_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
 
 	.long	(CFG_LBC_CACHE_BASE>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
 
 	.long	(CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M)
 
 	.long	(CFG_PCIE1_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
 
 	.long	(CFG_PCIE2_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
 	.long	(CFG_PCIE2_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K)
 
 	/* contains both PCIE3 MEM & IO space */
 	.long	(CFG_PCIE3_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M)
 4:
 	entry_end
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 76d909191..66cb536a4 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -29,14 +29,11 @@
 #include <asm/io.h>
 #include <spd.h>
 #include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #include "../common/pixis.h"
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-#endif
-
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
@@ -52,10 +49,9 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-	volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
 
 	if ((uint)&gur->porpllsr != 0xe00e0000) {
 		printf("immap size error %x\n",&gur->porpllsr);
@@ -149,8 +145,7 @@ int first_free_busno=0;
 void
 pci_init_board(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -227,7 +222,7 @@ pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32(CFG_PCIE3_MEM_BASE);
+		in_be32((u32 *)CFG_PCIE3_MEM_BASE);
 	} else {
 		printf ("    PCIE3: disabled\n");
 	}
@@ -508,51 +503,47 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
+
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 *p;
-	int len;
+	int node, tmp[2];
+	const char *path;
 
 	ft_cpu_setup(blob, bd);
 
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
 #ifdef CONFIG_PCI1
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-		debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
-#endif
-#ifdef CONFIG_PCIE1
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-		debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
 #endif
 #ifdef CONFIG_PCIE2
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
-		debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_PCIE1
+		path = fdt_getprop(blob, node, "pci2", NULL);
+		if (path) {
+			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
 #endif
 #ifdef CONFIG_PCIE3
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@b000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;;
-		debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
+		path = fdt_getprop(blob, node, "pci3", NULL);
+		if (path) {
+			tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
 #endif
+	}
 }
 #endif
diff --git a/board/cds/mpc8548cds/Makefile b/board/freescale/mpc8548cds/Makefile
index 7f5309885..7f5309885 100644
--- a/board/cds/mpc8548cds/Makefile
+++ b/board/freescale/mpc8548cds/Makefile
diff --git a/board/cds/mpc8548cds/config.mk b/board/freescale/mpc8548cds/config.mk
index b23bc8737..b23bc8737 100644
--- a/board/cds/mpc8548cds/config.mk
+++ b/board/freescale/mpc8548cds/config.mk
diff --git a/board/cds/mpc8548cds/init.S b/board/freescale/mpc8548cds/init.S
index 72940b035..a83a0952c 100644
--- a/board/cds/mpc8548cds/init.S
+++ b/board/freescale/mpc8548cds/init.S
@@ -28,13 +28,6 @@
 #include <config.h>
 #include <mpc85xx.h>
 
-#define LAWAR_TRGT_PCI1		0x00000000
-#define LAWAR_TRGT_PCI2		0x00100000
-#define LAWAR_TRGT_PCIE		0x00200000
-#define LAWAR_TRGT_RIO		0x00c00000
-#define LAWAR_TRGT_LBC		0x00400000
-#define LAWAR_TRGT_DDR		0x00f00000
-
 /*
  * TLB0 and TLB1 Entries
  *
@@ -232,39 +225,39 @@ law_entry:
 	.long (4f-3f)/8
 3:
 	.long  0
-	.long  (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
+	.long  (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
 
 #ifdef CFG_PCI1_MEM_PHYS
 	.long	(CFG_PCI1_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
 	.long	(CFG_PCI1_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
 #endif
 
 #ifdef CFG_PCI2_MEM_PHYS
 	.long	(CFG_PCI2_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
 	.long	(CFG_PCI2_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
 #endif
 
 #ifdef CFG_PCIE1_MEM_PHYS
 	.long	(CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
 	.long	(CFG_PCIE1_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
 #endif
 
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
 	.long	(CFG_LBC_CACHE_BASE>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
 
 #ifdef CFG_RIO_MEM_PHYS
 	.long	(CFG_RIO_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)
+	.long	LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)
 #endif
 4:
 	entry_end
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 36d7e1ed4..47e2dd86c 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -29,14 +29,13 @@
 #include <asm/immap_fsl_pci.h>
 #include <spd.h>
 #include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #include "../common/cadmus.h"
 #include "../common/eeprom.h"
 #include "../common/via.h"
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
@@ -55,9 +54,8 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
@@ -96,7 +94,6 @@ long int
 initdram(int board_type)
 {
 	long dram_size = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
@@ -109,7 +106,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur= &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -139,9 +136,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -177,8 +173,7 @@ sdram_init(void)
 #if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
 
 	uint idx;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -330,8 +325,7 @@ int first_free_busno=0;
 void
 pci_init_board(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
 
@@ -524,30 +518,30 @@ int last_stage_init(void)
 }
 
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_pci_setup(void *blob, bd_t *bd)
 {
-	u32 *p;
-	int len;
-
+	int node, tmp[2];
+	const char *path;
 
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
 #ifdef CONFIG_PCI1
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-		debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
 #endif
-
 #ifdef CONFIG_PCIE1
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-		debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
 #endif
+	}
 }
 #endif
diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds
index 530ba5a72..ee772d3ae 100644
--- a/board/cds/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
   .bootpg 0xFFFFF000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8548cds/init.o (.bootpg)
+    board/freescale/mpc8548cds/init.o (.bootpg)
   } = 0xffff
 
   /* Read-only sections, merged into text segment: */
@@ -64,12 +64,12 @@ SECTIONS
   .text      :
   {
     cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8548cds/init.o (.text)
+    board/freescale/mpc8548cds/init.o (.text)
     cpu/mpc85xx/traps.o (.text)
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
-    drivers/tsec.o (.text)
+    drivers/net/tsec.o (.text)
     cpu/mpc85xx/speed.o (.text)
     common/dlmalloc.o (.text)
     lib_generic/crc32.o (.text)
diff --git a/board/cds/mpc8555cds/Makefile b/board/freescale/mpc8555cds/Makefile
index 7f5309885..7f5309885 100644
--- a/board/cds/mpc8555cds/Makefile
+++ b/board/freescale/mpc8555cds/Makefile
diff --git a/board/cds/mpc8555cds/config.mk b/board/freescale/mpc8555cds/config.mk
index 5dcaa774d..5dcaa774d 100644
--- a/board/cds/mpc8555cds/config.mk
+++ b/board/freescale/mpc8555cds/config.mk
diff --git a/board/cds/mpc8555cds/init.S b/board/freescale/mpc8555cds/init.S
index 978bda5e4..978bda5e4 100644
--- a/board/cds/mpc8555cds/init.S
+++ b/board/freescale/mpc8555cds/init.S
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 8f1642187..74c220d4f 100644
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -26,6 +26,8 @@
 #include <asm/immap_85xx.h>
 #include <ioports.h>
 #include <spd.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #include "../common/cadmus.h"
 #include "../common/eeprom.h"
@@ -201,8 +203,7 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
@@ -248,7 +249,6 @@ long int
 initdram(int board_type)
 {
 	long dram_size = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
@@ -261,7 +261,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur= &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -291,9 +291,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -342,8 +341,7 @@ sdram_init(void)
 #if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
 
 	uint idx;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -506,3 +504,31 @@ pci_init_board(void)
 	pci_mpc85xx_init(hose);
 #endif
 }
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	int node, tmp[2];
+	const char *path;
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI1
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = hose[0].last_busno - hose[0].first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_MPC85XX_PCI2
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = hose[1].last_busno - hose[1].first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+	}
+}
+#endif
diff --git a/board/cds/mpc8541cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds
index dc87a122a..df21ea86e 100644
--- a/board/cds/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
   .bootpg 0xFFFFF000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8541cds/init.o (.bootpg)
+    board/freescale/mpc8555cds/init.o (.bootpg)
   } = 0xffff
 
   /* Read-only sections, merged into text segment: */
@@ -64,12 +64,12 @@ SECTIONS
   .text      :
   {
     cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8541cds/init.o (.text)
+    board/freescale/mpc8555cds/init.o (.text)
     cpu/mpc85xx/traps.o (.text)
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
-    drivers/tsec.o (.text)
+    drivers/net/tsec.o (.text)
     cpu/mpc85xx/speed.o (.text)
     cpu/mpc85xx/pci.o (.text)
     common/dlmalloc.o (.text)
diff --git a/board/mpc8560ads/Makefile b/board/freescale/mpc8560ads/Makefile
index 29136508f..29136508f 100644
--- a/board/mpc8560ads/Makefile
+++ b/board/freescale/mpc8560ads/Makefile
diff --git a/board/mpc8560ads/config.mk b/board/freescale/mpc8560ads/config.mk
index 9aef2bb16..9aef2bb16 100644
--- a/board/mpc8560ads/config.mk
+++ b/board/freescale/mpc8560ads/config.mk
diff --git a/board/mpc8560ads/init.S b/board/freescale/mpc8560ads/init.S
index 544fde94c..544fde94c 100644
--- a/board/mpc8560ads/init.S
+++ b/board/freescale/mpc8560ads/init.S
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index eef524b45..bb7f11bcc 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -32,10 +32,8 @@
 #include <ioports.h>
 #include <spd.h>
 #include <miiphy.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -278,13 +276,12 @@ initdram(int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
+	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	    uint temp_ddrdll = 0;
 
 	    /*
@@ -326,9 +323,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -387,8 +383,7 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
@@ -483,8 +478,7 @@ int testdram (void)
 long int fixed_sdram (void)
 {
   #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 
 	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
 	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
@@ -548,35 +542,25 @@ pci_init_board(void)
 }
 
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_soc_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-	p = ft_get_prop(blob, "/" OF_SOC "/cpm@e0000000/brg-frequency", &len);
-
-	if (p != NULL)
-		*p = cpu_to_be32(bd->bi_brgfreq);
-
-	p = ft_get_prop(blob,
-			"/" OF_SOC "/cpm@e0000000/scc@91a00/current-speed",
-			&len);
-	if (p != NULL)
-		*p = cpu_to_be32(bd->bi_baudrate);
-
-	p = ft_get_prop(blob,
-			"/" OF_SOC "/cpm@e0000000/scc@91a20/current-speed",
-			&len);
-	if (p != NULL)
-		*p = cpu_to_be32(bd->bi_baudrate);
-}
-
+#if defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
+	int node, tmp[2];
+	const char *path;
+
 	ft_cpu_setup(blob, bd);
-	ft_soc_setup(blob, bd);
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = hose.last_busno - hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+	}
 }
 #endif
diff --git a/board/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds
index 726a153f9..c2cba617e 100644
--- a/board/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -35,7 +35,7 @@ SECTIONS
   .bootpg 0xFFFFF000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-    board/mpc8560ads/init.o (.bootpg)
+    board/freescale/mpc8560ads/init.o (.bootpg)
   } = 0xffff
 
   /* Read-only sections, merged into text segment: */
@@ -65,7 +65,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc85xx/start.o	(.text)
-    board/mpc8560ads/init.o (.text)
+    board/freescale/mpc8560ads/init.o (.text)
     cpu/mpc85xx/commproc.o (.text)
     cpu/mpc85xx/traps.o (.text)
     cpu/mpc85xx/interrupts.o (.text)
diff --git a/board/mpc8568mds/Makefile b/board/freescale/mpc8568mds/Makefile
index a799aa4cc..643fbc041 100644
--- a/board/mpc8568mds/Makefile
+++ b/board/freescale/mpc8568mds/Makefile
@@ -29,9 +29,7 @@ endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o \
-	bcsr.o \
-	ft_board.o
+COBJS	:= $(BOARD).o bcsr.o
 
 SOBJS	:= init.o
 
diff --git a/board/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
index aae0f98e0..aae0f98e0 100644
--- a/board/mpc8568mds/bcsr.c
+++ b/board/freescale/mpc8568mds/bcsr.c
diff --git a/board/mpc8568mds/bcsr.h b/board/freescale/mpc8568mds/bcsr.h
index aefd9bf54..aefd9bf54 100644
--- a/board/mpc8568mds/bcsr.h
+++ b/board/freescale/mpc8568mds/bcsr.h
diff --git a/board/mpc8568mds/config.mk b/board/freescale/mpc8568mds/config.mk
index 021522caf..021522caf 100644
--- a/board/mpc8568mds/config.mk
+++ b/board/freescale/mpc8568mds/config.mk
diff --git a/board/mpc8568mds/init.S b/board/freescale/mpc8568mds/init.S
index 972a7d429..e36036daf 100644
--- a/board/mpc8568mds/init.S
+++ b/board/freescale/mpc8568mds/init.S
@@ -28,7 +28,6 @@
 #include <config.h>
 #include <mpc85xx.h>
 
-
 /*
  * TLB0 and TLB1 Entries
  *
@@ -216,15 +215,14 @@ tlb1_entry:
 #define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
 #define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
-#define LAWBAR2 ((CFG_PEX_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 #define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
 #define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
 
-#define LAWBAR4 ((CFG_PEX_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4  (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_8M))
-
+#define LAWBAR4 ((CFG_PCIE1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4  (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
 
 #define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
 #define LAWAR5	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
diff --git a/board/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 818ff138a..460cb1b27 100644
--- a/board/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -26,9 +26,12 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
 #include <spd.h>
 #include <i2c.h>
 #include <ioports.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #include "bcsr.h"
 
@@ -133,7 +136,6 @@ long int
 initdram(int board_type)
 {
 	long dram_size = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
@@ -146,7 +148,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur= &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -176,9 +178,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -211,8 +212,7 @@ sdram_init(void)
 #if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
 
 	uint idx;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
@@ -337,16 +337,19 @@ static struct pci_config_table pci_mpc8568mds_config_table[] = {
 };
 #endif
 
-static struct pci_controller hose[] = {
-	{
+static struct pci_controller pci1_hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table: pci_mpc8568mds_config_table,
 #endif
-	}
 };
-
 #endif	/* CONFIG_PCI */
 
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif  /* CONFIG_PCIE1 */
+
+int first_free_busno = 0;
+
 /*
  * pib_init() -- Initialize the PCA9555 IO expander on the PIB board
  */
@@ -389,11 +392,164 @@ pib_init(void)
 	asm("eieio");
 }
 
+#ifdef CONFIG_PCI
 void
 pci_init_board(void)
 {
-#ifdef CONFIG_PCI
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+#ifdef CONFIG_PCI1
+{
 	pib_init();
-	pci_mpc85xx_init(hose);
+
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+
+	uint pci_32 = 1;      /* PORDEVSR[15] */
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;       /* PORDEVSR[14] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;   /* PORPLLSR[16] */
+
+	uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+
+	uint pci_speed = 66666000;
+
+	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("    PCI: %d bit, %s MHz, %s, %s, %s\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter"
+			);
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+				CFG_PCI_MEMORY_BUS,
+				CFG_PCI_MEMORY_PHYS,
+				CFG_PCI_MEMORY_SIZE,
+				PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+				CFG_PCI1_MEM_BASE,
+				CFG_PCI1_MEM_PHYS,
+				CFG_PCI1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+				CFG_PCI1_IO_BASE,
+				CFG_PCI1_IO_PHYS,
+				CFG_PCI1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno = hose->last_busno+1;
+		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+	} else {
+	printf ("    PCI: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
 #endif
+
+#ifdef CONFIG_PCIE1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+
+	int pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE connected to slot as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+				CFG_PCI_MEMORY_BUS,
+				CFG_PCI_MEMORY_PHYS,
+				CFG_PCI_MEMORY_SIZE,
+				PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+				CFG_PCIE1_MEM_BASE,
+				CFG_PCIE1_MEM_PHYS,
+				CFG_PCIE1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+				CFG_PCIE1_IO_BASE,
+				CFG_PCIE1_IO_PHYS,
+				CFG_PCIE1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		printf ("PCIE on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+
+		first_free_busno=hose->last_busno+1;
+
+	} else {
+		printf ("    PCIE: disabled\n");
+	}
 }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+}
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	int node, tmp[2];
+	const char *path;
+
+	ft_cpu_setup(blob, bd);
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI1
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_PCIE1
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+	}
+}
+#endif
diff --git a/board/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds
index 71099f6f1..4682041ad 100644
--- a/board/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -37,7 +37,7 @@ SECTIONS
   .bootpg 0xFFFFF000:
   {
 	cpu/mpc85xx/start.o	(.bootpg)
-	board/mpc8568mds/init.o (.bootpg)
+	board/freescale/mpc8568mds/init.o (.bootpg)
   } = 0xffff
 
   /* Read-only sections, merged into text segment: */
@@ -67,7 +67,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc85xx/start.o	(.text)
-    board/mpc8568mds/init.o (.text)
+    board/freescale/mpc8568mds/init.o (.text)
     cpu/mpc85xx/traps.o (.text)
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8610hpcd/Makefile b/board/freescale/mpc8610hpcd/Makefile
new file mode 100644
index 000000000..76087c12a
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/Makefile
@@ -0,0 +1,59 @@
+# Copyright 2007 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o \
+	../common/sys_eeprom.o \
+	../common/pixis.o \
+	mpc8610hpcd_diu.o \
+	../common/fsl_diu_fb.o
+
+SOBJS	:= init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+.PHONY: distclean
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc8610hpcd/config.mk b/board/freescale/mpc8610hpcd/config.mk
new file mode 100644
index 000000000..64ac4dcd7
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/config.mk
@@ -0,0 +1,25 @@
+# Copyright 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xfff00000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8610=1 -maltivec -mabi=altivec -msoft-float -O2
diff --git a/board/freescale/mpc8610hpcd/init.S b/board/freescale/mpc8610hpcd/init.S
new file mode 100644
index 000000000..4d811e137
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/init.S
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <config.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <mpc86xx.h>
+
+#define LAWAR_TRGT_PCI1		0x00000000
+#define LAWAR_TRGT_PCIE1	0x00200000
+#define LAWAR_TRGT_PCIE2	0x00100000
+#define LAWAR_TRGT_LBC		0x00400000
+#define LAWAR_TRGT_DDR		0x00f00000
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
+#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#else
+#define LAWBAR1 0
+#define LAWAR1	((LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xffffff)
+#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR3 ((CFG_PCIE2_MEM_BASE>>12) & 0xffffff)
+#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR4 ((PIXIS_BASE>>12) & 0xffffff)
+#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M))
+
+#define LAWBAR5 ((CFG_PCIE1_IO_PHYS>>12) & 0xffffff)
+#define LAWAR5	(LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+#define LAWBAR6 ((CFG_PCIE2_IO_PHYS>>12) & 0xffffff)
+#define LAWAR6	(LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+#define LAWBAR7 ((CFG_FLASH_BASE >>12) & 0xffffff)
+#define LAWAR7	(LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR8 ((CFG_PCI1_MEM_PHYS>>12) & 0xffffff)
+#define LAWAR8	(LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR9 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff)
+#define LAWAR9	(LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+law_entry:
+	lis	r7,CFG_CCSRBAR@h
+	ori	r7,r7,CFG_CCSRBAR@l
+
+	addi	r4,r7,0
+	addi	r5,r7,0
+
+	/* Skip LAWAR0, start at LAWAR1 */
+	lis	r6,LAWBAR1@h
+	ori	r6,r6,LAWBAR1@l
+	stwu	r6, 0xc28(r4)
+
+	lis	r6,LAWAR1@h
+	ori	r6,r6,LAWAR1@l
+	stwu	r6, 0xc30(r5)
+
+	/* LAWBAR2, LAWAR2 */
+	lis	r6,LAWBAR2@h
+	ori	r6,r6,LAWBAR2@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR2@h
+	ori	r6,r6,LAWAR2@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR3, LAWAR3 */
+	lis	r6,LAWBAR3@h
+	ori	r6,r6,LAWBAR3@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR3@h
+	ori	r6,r6,LAWAR3@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR4, LAWAR4 */
+	lis	r6,LAWBAR4@h
+	ori	r6,r6,LAWBAR4@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR4@h
+	ori	r6,r6,LAWAR4@l
+	stwu	r6, 0x20(r5)
+	/* LAWBAR5, LAWAR5 */
+	lis	r6,LAWBAR5@h
+	ori	r6,r6,LAWBAR5@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR5@h
+	ori	r6,r6,LAWAR5@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR6, LAWAR6 */
+	lis	r6,LAWBAR6@h
+	ori	r6,r6,LAWBAR6@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR6@h
+	ori	r6,r6,LAWAR6@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR7, LAWAR7 */
+	lis	r6,LAWBAR7@h
+	ori	r6,r6,LAWBAR7@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR7@h
+	ori	r6,r6,LAWAR7@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR8, LAWAR8 */
+	lis	r6,LAWBAR8@h
+	ori	r6,r6,LAWBAR8@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR8@h
+	ori	r6,r6,LAWAR8@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR9, LAWAR9 */
+	lis	r6,LAWBAR9@h
+	ori	r6,r6,LAWBAR9@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR9@h
+	ori	r6,r6,LAWAR9@l
+	stwu	r6, 0x20(r5)
+
+	blr
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
new file mode 100644
index 000000000..617881ad0
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -0,0 +1,546 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define DEBUG
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_86xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <spd.h>
+#include <asm/io.h>
+
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+#include "../common/pixis.h"
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+#include "spd_sdram.h"
+#endif
+
+void sdram_init(void);
+long int fixed_sdram(void);
+
+/* called before any console output */
+int board_early_init_f(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+
+	gur->gpiocr |= 0x88aa5500; /* DIU16, IR1, UART0, UART2 */
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	u8 tmp_val, version;
+
+	/*Do not use 8259PIC*/
+	tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
+	out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x80);
+
+	/*For FPGA V7 or higher, set the IRQMAPSEL to 0 to use MAP0 interrupt*/
+	version = in8(PIXIS_BASE + PIXIS_PVER);
+	if(version >= 0x07) {
+		tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
+		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xbf);
+	}
+
+	/* Using this for DIU init before the driver in linux takes over
+	 *  Enable the TFP410 Encoder (I2C address 0x38)
+	 */
+
+	tmp_val = 0xBF;
+	i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+	/* Verify if enabled */
+	tmp_val = 0;
+	i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+	debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+
+	tmp_val = 0x10;
+	i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+	/* Verify if enabled */
+	tmp_val = 0;
+	i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+	debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+
+#ifdef CONFIG_FSL_DIU_FB
+	mpc8610hpcd_diu_init();
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+
+	puts("Board: MPC8610HPCD\n");
+
+	mcm->abcr |= 0x00010000; /* 0 */
+	mcm->hpmr3 = 0x80000008; /* 4c */
+	mcm->hpmr0 = 0;
+	mcm->hpmr1 = 0;
+	mcm->hpmr2 = 0;
+	mcm->hpmr4 = 0;
+	mcm->hpmr5 = 0;
+
+	return 0;
+}
+
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram();
+#else
+	dram_size = fixed_sdram();
+#endif
+
+#if defined(CFG_RAMBOOT)
+	puts(" DDR: ");
+	return dram_size;
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	puts(" DDR: ");
+	return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	puts("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+
+long int fixed_sdram(void)
+{
+#if !defined(CFG_RAMBOOT)
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+	uint d_init;
+
+	ddr->cs0_bnds = 0x0000001f;
+	ddr->cs0_config = 0x80010202;
+
+	ddr->ext_refrec = 0x00000000;
+	ddr->timing_cfg_0 = 0x00260802;
+	ddr->timing_cfg_1 = 0x3935d322;
+	ddr->timing_cfg_2 = 0x14904cc8;
+	ddr->sdram_mode_1 = 0x00480432;
+	ddr->sdram_mode_2 = 0x00000000;
+	ddr->sdram_interval = 0x06180fff; /* 0x06180100; */
+	ddr->sdram_data_init = 0xDEADBEEF;
+	ddr->sdram_clk_cntl = 0x03800000;
+	ddr->sdram_cfg_2 = 0x04400010;
+
+#if defined(CONFIG_DDR_ECC)
+	ddr->err_int_en = 0x0000000d;
+	ddr->err_disable = 0x00000000;
+	ddr->err_sbe = 0x00010000;
+#endif
+	asm("sync;isync");
+
+	udelay(500);
+
+	ddr->sdram_cfg_1 = 0xc3000000; /* 0xe3008000;*/
+
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	d_init = 1;
+	debug("DDR - 1st controller: memory initializing\n");
+	/*
+	 * Poll until memory is initialized.
+	 * 512 Meg at 400 might hit this 200 times or so.
+	 */
+	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
+		udelay(1000);
+
+	debug("DDR: memory initialized\n\n");
+	asm("sync; isync");
+	udelay(500);
+#endif
+
+	return 512 * 1024 * 1024;
+#endif
+	return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+
+#endif
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_fsl86xxads_config_table[] = {
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
+	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				 PCI_ENET0_MEMADDR,
+				 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} },
+	{}
+};
+#endif
+
+
+static struct pci_controller pci1_hose = {
+#ifndef CONFIG_PCI_PNP
+config_table:pci_mpc86xxcts_config_table
+#endif
+};
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+int first_free_busno = 0;
+
+void pci_init_board(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+	printf( " pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+		devdisr, io_sel, host_agent);
+
+
+#ifdef CONFIG_PCIE1
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_configured = (io_sel == 1) || (io_sel == 4);
+	int pcie_ep = (host_agent == 0) || (host_agent == 2) ||
+		(host_agent == 5);
+
+	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
+		printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det)
+			pci->pme_msg_det = 0xffffffff;
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			 CFG_PCI_MEMORY_BUS,
+			 CFG_PCI_MEMORY_PHYS,
+			 CFG_PCI_MEMORY_SIZE,
+			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			 CFG_PCIE1_MEM_BASE,
+			 CFG_PCIE1_MEM_PHYS,
+			 CFG_PCIE1_MEM_SIZE,
+			 PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			 CFG_PCIE1_IO_BASE,
+			 CFG_PCIE1_IO_PHYS,
+			 CFG_PCIE1_IO_SIZE,
+			 PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+				 (int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf(" PCI-Express 1 on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+
+	} else
+		puts(" PCI-Express 1: Disabled\n");
+ }
+#else
+	puts("PCI-Express 1: Disabled\n");
+#endif /* CONFIG_PCIE1 */
+
+
+#ifdef CONFIG_PCIE2
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie2_hose;
+
+	int pcie_configured = (io_sel == 0) || (io_sel == 4);
+	int pcie_ep = (host_agent == 0) || (host_agent == 1) ||
+		(host_agent == 4);
+
+	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) {
+		printf(" PCI-Express 2 connected to slot as %s" \
+			" (base address %x)\n",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det)
+			pci->pme_msg_det = 0xffffffff;
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			 CFG_PCI_MEMORY_BUS,
+			 CFG_PCI_MEMORY_PHYS,
+			 CFG_PCI_MEMORY_SIZE,
+			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			 CFG_PCIE2_MEM_BASE,
+			 CFG_PCIE2_MEM_PHYS,
+			 CFG_PCIE2_MEM_SIZE,
+			 PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			 CFG_PCIE2_IO_BASE,
+			 CFG_PCIE2_IO_PHYS,
+			 CFG_PCIE2_IO_SIZE,
+			 PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+				 (int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf(" PCI-Express 2 on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+	} else
+		puts(" PCI-Express 2: Disabled\n");
+ }
+#else
+	puts("PCI-Express 2: Disabled\n");
+#endif /* CONFIG_PCIE2 */
+
+
+#ifdef CONFIG_PCI1
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+	int pci_agent = (host_agent >= 4) && (host_agent <= 6);
+
+	if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
+		printf(" PCI connected to PCI slots as %s" \
+			" (base address %x)\n",
+			pci_agent ? "Agent" : "Host",
+			(uint)pci);
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			 CFG_PCI_MEMORY_BUS,
+			 CFG_PCI_MEMORY_PHYS,
+			 CFG_PCI_MEMORY_SIZE,
+			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			 CFG_PCI1_MEM_BASE,
+			 CFG_PCI1_MEM_PHYS,
+			 CFG_PCI1_MEM_SIZE,
+			 PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			 CFG_PCI1_IO_BASE,
+			 CFG_PCI1_IO_PHYS,
+			 CFG_PCI1_IO_SIZE,
+			 PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr,
+				 (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf(" PCI on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+
+
+	} else
+		puts(" PCI: Disabled\n");
+ }
+#endif /* CONFIG_PCI1 */
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	ft_cpu_setup(blob, bd);
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
+	}
+
+#ifdef CONFIG_PCI1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+		debug("pci@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+#ifdef CONFIG_PCIE1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+		debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+#ifdef CONFIG_PCIE2
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+		debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+
+}
+#endif
+
+/*
+ * get_board_sys_clk
+ * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
+ */
+
+unsigned long
+get_board_sys_clk(ulong dummy)
+{
+	u8 i;
+	ulong val = 0;
+	ulong a;
+
+	a = PIXIS_BASE + PIXIS_SPD;
+	i = in8(a);
+	i &= 0x07;
+
+	switch (i) {
+	case 0:
+		val = 33333000;
+		break;
+	case 1:
+		val = 39999600;
+		break;
+	case 2:
+		val = 49999500;
+		break;
+	case 3:
+		val = 66666000;
+		break;
+	case 4:
+		val = 83332500;
+		break;
+	case 5:
+		val = 99999000;
+		break;
+	case 6:
+		val = 133332000;
+		break;
+	case 7:
+		val = 166665000;
+		break;
+	}
+
+	return val;
+}
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
new file mode 100644
index 000000000..b70637f94
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_FSL_DIU_FB
+
+#include "../common/pixis.h"
+#include "../common/fsl_diu_fb.h"
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+#include <devices.h>
+#include <video_fb.h>
+#endif
+
+extern unsigned int FSL_Logo_BMP[];
+
+static int xres, yres;
+
+
+void mpc8610hpcd_diu_init(void)
+{
+	char *monitor_port;
+	int gamma_fix;
+	unsigned int pixel_format;
+	unsigned char tmp_val;
+	unsigned char pixis_arch;
+
+	tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
+	pixis_arch = in8(PIXIS_BASE + PIXIS_VER);
+
+	monitor_port = getenv("monitor");
+	if (!strncmp(monitor_port, "0", 1)) {	/* 0 - DVI */
+		xres = 1280;
+		yres = 1024;
+		if (pixis_arch == 0x01)
+			pixel_format = 0x88882317;
+		else
+			pixel_format = 0x88883316;
+		gamma_fix = 0;
+		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
+
+	} else if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */
+		xres = 1024;
+		yres = 768;
+		pixel_format = 0x88883316;
+		gamma_fix = 0;
+		out8(PIXIS_BASE + PIXIS_BRDCFG0, (tmp_val & 0xf7) | 0x10);
+
+	} else if (!strncmp(monitor_port, "2", 1)) { /* 2 - Double link LVDS */
+		xres = 1280;
+		yres = 1024;
+		pixel_format = 0x88883316;
+		gamma_fix = 1;
+		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xe7);
+
+	} else {	/* DVI */
+		xres = 1280;
+		yres = 1024;
+		pixel_format = 0x88882317;
+		gamma_fix = 0;
+		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
+	}
+
+	fsl_diu_init(xres, pixel_format, gamma_fix,
+		     (unsigned char *)FSL_Logo_BMP);
+}
+
+int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp,
+			     int flag, int argc, char *argv[])
+{
+	unsigned int addr;
+
+	if (argc < 2) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (!strncmp(argv[1],"init",4)) {
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+		fsl_diu_clear_screen();
+		drv_video_init();
+#else
+		mpc8610hpcd_diu_init();
+#endif
+	} else {
+		addr = simple_strtoul(argv[1], NULL, 16);
+		fsl_diu_clear_screen();
+		fsl_diu_display_bmp((unsigned char *)addr, 0, 0, 0);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	diufb, CFG_MAXARGS, 1, mpc8610diu_init_show_bmp,
+	"diufb init | addr - Init or Display BMP file\n",
+	"init\n    - initialize DIU\n"
+	"addr\n    - display bmp at address 'addr'\n"
+	);
+
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+
+/*
+ * The Graphic Device
+ */
+GraphicDevice ctfb;
+void *video_hw_init(void)
+{
+	GraphicDevice *pGD = (GraphicDevice *) &ctfb;
+	struct fb_info *info;
+
+	mpc8610hpcd_diu_init();
+
+	/* fill in Graphic device struct */
+	sprintf(pGD->modeIdent,
+		"%dx%dx%d %ldkHz %ldHz",
+		xres, yres, 32, 64, 60);
+
+	pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
+	pGD->winSizeX = xres;
+	pGD->winSizeY = yres - info->logo_height;
+	pGD->plnSizeX = pGD->winSizeX;
+	pGD->plnSizeY = pGD->winSizeY;
+
+	pGD->gdfBytesPP = 4;
+	pGD->gdfIndex = GDF_32BIT_X888RGB;
+
+	pGD->isaBase = 0;
+	pGD->pciBase = 0;
+	pGD->memSize = info->screen_size - info->logo_size;
+
+	/* Cursor Start Address */
+	pGD->dprBase = 0;
+	pGD->vprBase = 0;
+	pGD->cprBase = 0;
+
+	return (void *)pGD;
+}
+
+void video_set_lut (unsigned int index,	/* color number */
+		    unsigned char r,	/* red */
+		    unsigned char g,	/* green */
+		    unsigned char b	/* blue */
+		    )
+{
+	return;
+}
+
+#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
+
+#endif /* CONFIG_FSL_DIU_FB */
diff --git a/board/freescale/mpc8610hpcd/u-boot.lds b/board/freescale/mpc8610hpcd/u-boot.lds
new file mode 100644
index 000000000..ae9c6c4a0
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/u-boot.lds
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+
+SECTIONS
+{
+
+  /* Read-only sections, merged into text segment: */
+  .interp : { *(.interp) }
+  .hash		 : { *(.hash)		}
+  .dynsym	 : { *(.dynsym)		}
+  .dynstr	 : { *(.dynstr)		}
+  .rel.text	 : { *(.rel.text)	}
+  .rela.text	 : { *(.rela.text)	}
+  .rel.data	 : { *(.rel.data)	}
+  .rela.data	 : { *(.rela.data)	}
+  .rel.rodata	 : { *(.rel.rodata)	}
+  .rela.rodata	 : { *(.rela.rodata)	}
+  .rel.got	 : { *(.rel.got)	}
+  .rela.got	 : { *(.rela.got)	}
+  .rel.ctors	 : { *(.rel.ctors)	}
+  .rela.ctors	 : { *(.rela.ctors)	}
+  .rel.dtors	 : { *(.rel.dtors)	}
+  .rela.dtors	 : { *(.rela.dtors)	}
+  .rel.bss	 : { *(.rel.bss)	}
+  .rela.bss	 : { *(.rela.bss)	}
+  .rel.plt	 : { *(.rel.plt)	}
+  .rela.plt	 : { *(.rela.plt)	}
+  .init		 : { *(.init)	}
+  .plt : { *(.plt) }
+  .text :
+  {
+    cpu/mpc86xx/start.o	(.text)
+    board/freescale/mpc8610hpcd/init.o (.bootpg)
+    cpu/mpc86xx/traps.o (.text)
+    cpu/mpc86xx/interrupts.o (.text)
+    cpu/mpc86xx/cpu_init.o (.text)
+    cpu/mpc86xx/cpu.o (.text)
+    cpu/mpc86xx/speed.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini	     : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data	   :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss	     :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 931be9f37..827878939 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -27,11 +27,8 @@
 #include <asm/immap_fsl_pci.h>
 #include <spd.h>
 #include <asm/io.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #include "../common/pixis.h"
 
@@ -324,36 +321,47 @@ void pci_init_board(void)
 
 }
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 *p;
-	int len;
+	int node, tmp[2];
+	const char *path;
 
-	ft_cpu_setup(blob, bd);
+	fdt_fixup_ethernet(blob, bd);
 
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "timebase-frequency", bd->bi_busfreq / 4, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "clock-frequency", bd->bi_intfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+			     "bus-frequency", bd->bi_busfreq, 1);
+
+	do_fixup_by_compat_u32(blob, "ns16550",
+			       "clock-frequency", bd->bi_busfreq, 1);
+
+	fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
 #ifdef CONFIG_PCI1
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@8000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-		debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
 #endif
 #ifdef CONFIG_PCI2
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = 0;
-		p[1] = pci2_hose.last_busno - pci2_hose.first_busno;
-		debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
-	}
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
 #endif
+	}
 }
 #endif
 
diff --git a/board/g2000/u-boot.lds b/board/g2000/u-boot.lds
index 43f776579..43fe6ca0b 100644
--- a/board/g2000/u-boot.lds
+++ b/board/g2000/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index ffeaf587b..6da80dc75 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -26,14 +26,13 @@
 #include <asm/au1x00.h>
 #include <asm/addrspace.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 #include <watchdog.h>
 
 #include "ee_access.h"
 
 static int wdi_status = 0;
 
-unsigned long mips_io_port_base = 0;
-
 #define SDRAM_SIZE ((64*1024*1024)-(12*4096))
 
 
@@ -147,6 +146,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #ifdef CONFIG_IDE_PCMCIA
 	/* PCMCIA is on a 36 bit physical address.
 	   We need to map it into a 32 bit addresses */
@@ -429,7 +431,7 @@ int misc_init_r(void){
 	    (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
 		printf ("*** ethernet addr invalid, using default ***\n");
 	} else {
-		setenv ("ethaddr", Rx);
+		setenv ("ethaddr", (char *)Rx);
 	}
 	return (0);
 }
diff --git a/board/gth2/lowlevel_init.S b/board/gth2/lowlevel_init.S
index 983ff704a..eea378a3b 100644
--- a/board/gth2/lowlevel_init.S
+++ b/board/gth2/lowlevel_init.S
@@ -413,7 +413,9 @@ noCacheJump:
 	j clearmem
 	nop
 
+#if 0
 	.globl	memtest
+#endif
 memtest:
 	/* Fill memory with address */
 	li	t0, 0x80000000
@@ -434,7 +436,9 @@ mt1:	lw	t2, 0(t0)
 	bne	t1, zero, mt1
 	nop
 	nop
+#if 0
 	.globl	clearmem
+#endif
 clearmem:
 		/* Clear memory */
 	li	t0, 0x80000000
diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds
index 90432cb88..ce53d9ddb 100644
--- a/board/gth2/u-boot.lds
+++ b/board/gth2/u-boot.lds
@@ -54,9 +54,11 @@ SECTIONS
 
 	.sdata  : { *(.sdata) }
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds
index 9bf0f0938..337a3954d 100644
--- a/board/hymod/u-boot.lds
+++ b/board/hymod/u-boot.lds
@@ -69,6 +69,7 @@ SECTIONS
     common/environment.o(.text)
 
     *(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index b05424d32..7176770f6 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -329,25 +329,14 @@ nand_init (void)
  */
 void ft_blob_update(void *blob, bd_t *bd)
 {
-	int ret, nodeoffset = 0;
-	ulong memory_data[2] = {0};
+	int ret;
 
-	memory_data[0] = cpu_to_be32(bd->bi_memstart);
-	memory_data[1] = cpu_to_be32(bd->bi_memsize);
+	ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
-	nodeoffset = fdt_find_node_by_path (blob, "/memory");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
-					sizeof(memory_data));
-	if (ret < 0)
+	if (ret < 0) {
 		printf("ft_blob_update): cannot set /memory/reg "
 			"property err:%s\n", fdt_strerror(ret));
 	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /memory node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
 }
 
 void ft_board_setup(void *blob, bd_t *bd)
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
index b5d9e0049..dbf0ecc5a 100644
--- a/board/incaip/incaip.c
+++ b/board/incaip/incaip.c
@@ -25,7 +25,7 @@
 #include <command.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
-
+#include <asm/io.h>
 
 extern uint incaip_get_cpuclk(void);
 
@@ -85,7 +85,6 @@ long int initdram(int board_type)
 
 int checkboard (void)
 {
-
 	unsigned long chipid = *INCA_IP_WDT_CHIPID;
 	int part_num;
 
@@ -107,5 +106,7 @@ int checkboard (void)
 
 	printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
index 9639b81ac..861873272 100644
--- a/board/incaip/u-boot.lds
+++ b/board/incaip/u-boot.lds
@@ -54,10 +54,11 @@ SECTIONS
 
 	.sdata  : { *(.sdata) }
 
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh
index 53b0d1e34..4b94d8ff8 100755
--- a/board/integratorap/split_by_variant.sh
+++ b/board/integratorap/split_by_variant.sh
@@ -14,7 +14,7 @@ echo	" 1 /* Integrator/AP	 */"		>> tmp.fil
 cpu="arm_intcm"
 variant="unknown core module"
 
-if [ "$1" == "" ]
+if [ "$1" = "" ]
 then
 	echo "$0:: No parameters - using arm_intcm"
 else
@@ -84,7 +84,7 @@ else
 	esac
 fi
 
-if [ "$cpu" == "arm_intcm" ]
+if [ "$cpu" = "arm_intcm" ]
 then
 	echo "/* Core module undefined/not ported */"	>> tmp.fil
 	echo "#define CONFIG_ARM_INTCM 1"		>> tmp.fil
diff --git a/board/integratorcp/split_by_variant.sh b/board/integratorcp/split_by_variant.sh
index 37ae517fc..79a6a9d55 100755
--- a/board/integratorcp/split_by_variant.sh
+++ b/board/integratorcp/split_by_variant.sh
@@ -12,7 +12,7 @@ echo     " 1 /* Integrator/CP   */"  		>> tmp.fil
 cpu="arm_intcm"
 variant="unknown core module"
 
-if [ "$1" == "" ]
+if [ "$1" = "" ]
 then
 	echo "$0:: No parameters - using arm_intcm"
 else
@@ -79,7 +79,7 @@ else
 
 fi
 
-if [ "$cpu" == "arm_intcm" ]
+if [ "$cpu" = "arm_intcm" ]
 then
 	echo "/* Core module undefined/not ported */"	>> tmp.fil
 	echo "#define CONFIG_ARM_INTCM 1"  		>> tmp.fil
diff --git a/rtc/Makefile b/board/korat/Makefile
index 2e6f3bddd..fa19e6fea 100644
--- a/rtc/Makefile
+++ b/board/korat/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2001-2006
+# (C) Copyright 2002-2007
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -23,24 +23,23 @@
 
 include $(TOPDIR)/config.mk
 
-#CFLAGS += -DDEBUG
+LIB	= $(obj)lib$(BOARD).a
 
-LIB	= $(obj)librtc.a
+COBJS	= $(BOARD).o
+SOBJS	= init.o
 
-COBJS	= date.o   \
-	  bf5xx_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \
-	  ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \
-	  m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \
-	  mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o \
-	  mcfrtc.o
-
-SRCS	:= $(COBJS:.o=.c)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-all:	$(LIB)
+clean:
+	rm -f $(SOBJS) $(OBJS)
 
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
 
 #########################################################################
 
diff --git a/board/korat/config.mk b/board/korat/config.mk
new file mode 100644
index 000000000..39966e03e
--- /dev/null
+++ b/board/korat/config.mk
@@ -0,0 +1,37 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# Korat (PPC440EPx) board
+#
+
+TEXT_BASE = 0xFFFA0000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/korat/init.S b/board/korat/init.S
new file mode 100644
index 000000000..bd0e8b4da
--- /dev/null
+++ b/board/korat/init.S
@@ -0,0 +1,80 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
+#include <config.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.  They are
+	 * generated dynamically in the SPD DDR2 detection routine.
+	 */
+
+#ifdef CFG_INIT_RAM_DCACHE
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+	/* TLB-entry for PCI Memory */
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+	/* TLB-entry for EBC */
+	tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I )
+
+	/* TLB-entry for Internal Registers & OCM */
+	/* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */
+	tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0,  AC_R|AC_W|AC_X|SA_I )
+
+	/*TLB-entry PCI registers*/
+	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|SA_G|SA_I )
+
+	/* TLB-entry for peripherals */
+	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|SA_G|SA_I)
+
+	/* TLB-entry PCI IO Space - from sr@denx.de */
+	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|SA_G|SA_I)
+
+	tlbtab_end
diff --git a/board/korat/korat.c b/board/korat/korat.c
new file mode 100644
index 000000000..7cb9ee11f
--- /dev/null
+++ b/board/korat/korat.c
@@ -0,0 +1,761 @@
+/*
+ * (C) Copyright 2007
+ * Larry Johnson, lrj@acm.org
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm-ppc/io.h>
+#include <i2c.h>
+#include <ppc440.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+
+ulong flash_get_size(ulong base, int banknum);
+
+int board_early_init_f(void)
+{
+	u32 sdr0_pfc1, sdr0_pfc2;
+	u32 gpio0_ir;
+	u32 reg;
+	int eth;
+
+	mtdcr(ebccfga, xbcfg);
+	mtdcr(ebccfgd, 0xb8400000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the GPIO pins
+	 *
+	 * Korat GPIO usage:
+	 *
+	 *                   Init.
+	 * Pin    Source I/O value Function
+	 * ------ ------ --- ----- ---------------------------------
+	 * GPIO00  Alt1  I/O   x   PerAddr07
+	 * GPIO01  Alt1  I/O   x   PerAddr06
+	 * GPIO02  Alt1  I/O   x   PerAddr05
+	 * GPIO03  GPIO   x    x   GPIO03 to expansion bus connector
+	 * GPIO04  GPIO   x    x   GPIO04 to expansion bus connector
+	 * GPIO05  GPIO   x    x   GPIO05 to expansion bus connector
+	 * GPIO06  Alt1   O    x   PerCS1 (2nd NOR flash)
+	 * GPIO07  Alt1   O    x   PerCS2 (CPLD)
+	 * GPIO08  Alt1   O    x   PerCS3 to expansion bus connector
+	 * GPIO09  Alt1   O    x   PerCS4 to expansion bus connector
+	 * GPIO10  Alt1   O    x   PerCS5 to expansion bus connector
+	 * GPIO11  Alt1   I    x   PerErr
+	 * GPIO12  GPIO   O    0   ATMega !Reset
+	 * GPIO13  GPIO   O    1   SPI Atmega !SS
+	 * GPIO14  GPIO   O    1   Write protect EEPROM #1 (0xA8)
+	 * GPIO15  GPIO   O    0   CPU Run LED !On
+	 * GPIO16  Alt1   O    x   GMC1TxD0
+	 * GPIO17  Alt1   O    x   GMC1TxD1
+	 * GPIO18  Alt1   O    x   GMC1TxD2
+	 * GPIO19  Alt1   O    x   GMC1TxD3
+	 * GPIO20  Alt1   O    x   RejectPkt0
+	 * GPIO21  Alt1   O    x   RejectPkt1
+	 * GPIO22  GPIO   I    x   PGOOD_DDR
+	 * GPIO23  Alt1   O    x   SCPD0
+	 * GPIO24  Alt1   O    x   GMC0TxD2
+	 * GPIO25  Alt1   O    x   GMC0TxD3
+	 * GPIO26  GPIO? I/O   x   IIC0SDA (selected in SDR0_PFC4)
+	 * GPIO27  GPIO   O    0   PHY #0 1000BASE-X
+	 * GPIO28  GPIO   O    0   PHY #1 1000BASE-X
+	 * GPIO29  GPIO   I    x   Test jumper !Present
+	 * GPIO30  GPIO   I    x   SFP module #0 !Present
+	 * GPIO31  GPIO   I    x   SFP module #1 !Present
+	 *
+	 * GPIO32  GPIO   O    1   SFP module #0 Tx !Enable
+	 * GPIO33  GPIO   O    1   SFP module #1 Tx !Enable
+	 * GPIO34  Alt2   I    x   !UART1_CTS
+	 * GPIO35  Alt2   O    x   !UART1_RTS
+	 * GPIO36  Alt1   I    x   !UART0_CTS
+	 * GPIO37  Alt1   O    x   !UART0_RTS
+	 * GPIO38  Alt2   O    x   UART1_Tx
+	 * GPIO39  Alt2   I    x   UART1_Rx
+	 * GPIO40  Alt1   I    x   IRQ0 (Ethernet 0)
+	 * GPIO41  Alt1   I    x   IRQ1 (Ethernet 1)
+	 * GPIO42  Alt1   I    x   IRQ2 (PCI interrupt)
+	 * GPIO43  Alt1   I    x   IRQ3 (System Alert from CPLD)
+	 * GPIO44  xxxx   x    x   (grounded through pulldown)
+	 * GPIO45  GPIO   O    0   PHY #0 Enable
+	 * GPIO46  GPIO   O    0   PHY #1 Enable
+	 * GPIO47  GPIO   I    x   Reset switch !Pressed
+	 * GPIO48  GPIO   I    x   Shutdown switch !Pressed
+	 * GPIO49  xxxx   x    x   (reserved for trace port)
+	 *   .      .     .    .               .
+	 *   .      .     .    .               .
+	 *   .      .     .    .               .
+	 * GPIO63  xxxx   x    x   (reserved for trace port)
+	 *-------------------------------------------------------------------*/
+
+	out_be32((u32 *) GPIO0_OR, 0x00060000);
+	out_be32((u32 *) GPIO1_OR, 0xC0000000);
+
+	out_be32((u32 *) GPIO0_OSRL, 0x54055400);
+	out_be32((u32 *) GPIO0_OSRH, 0x55015000);
+	out_be32((u32 *) GPIO1_OSRL, 0x02180000);
+	out_be32((u32 *) GPIO1_OSRH, 0x00000000);
+
+	out_be32((u32 *) GPIO0_TSRL, 0x54055500);
+	out_be32((u32 *) GPIO0_TSRH, 0x00015000);
+	out_be32((u32 *) GPIO1_TSRL, 0x00000000);
+	out_be32((u32 *) GPIO1_TSRH, 0x00000000);
+
+	out_be32((u32 *) GPIO0_TCR, 0x000FF0D8);
+	out_be32((u32 *) GPIO1_TCR, 0xD6060000);
+
+	out_be32((u32 *) GPIO0_ISR1L, 0x54000100);
+	out_be32((u32 *) GPIO0_ISR1H, 0x00500000);
+	out_be32((u32 *) GPIO1_ISR1L, 0x00405500);
+	out_be32((u32 *) GPIO1_ISR1H, 0x00000000);
+
+	out_be32((u32 *) GPIO0_ISR2L, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR2H, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR2L, 0x04010000);
+	out_be32((u32 *) GPIO1_ISR2H, 0x00000000);
+
+	out_be32((u32 *) GPIO0_ISR3L, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR3H, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR3L, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR3H, 0x00000000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffff7ff);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x00000000);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffffff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00000000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+	mtdcr(uic2er, 0x00000000);	/* disable all */
+	mtdcr(uic2cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic2pr, 0xffffffff);	/* per ref-board manual */
+	mtdcr(uic2tr, 0x00000000);	/* per ref-board manual */
+	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+
+	/* take sim card reader and CF controller out of reset */
+	out_8((u8 *) CFG_CPLD_BASE + 0x04, 0x80);
+
+	/* Configure the two Ethernet PHYs.  For each PHY, configure for fiber
+	 * if the SFP module is present, and for copper if it is not present.
+	 */
+	gpio0_ir = in_be32((u32 *) GPIO0_IR);
+	for (eth = 0; eth < 2; ++eth) {
+		if (gpio0_ir & (0x00000001 << (1 - eth))) {
+			/* SFP module not present: configure PHY for copper. */
+			/* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */
+			out_8((u8 *) CFG_CPLD_BASE + 0x06,
+			      in_8((u8 *) CFG_CPLD_BASE + 0x06) |
+			      0x06 << (4 * eth));
+		} else {
+			/* SFP module present: configure PHY for fiber and
+			   enable output */
+			out_be32((u32 *) GPIO0_OR, in_be32((u32 *) GPIO0_OR) |
+				 (0x00000001 << (4 - eth)));
+			out_be32((u32 *) GPIO1_OR, in_be32((u32 *) GPIO1_OR) &
+				 ~(0x00000001 << (31 - eth)));
+		}
+	}
+	/* enable Ethernet: set GPIO45 and GPIO46 to 1 */
+	out_be32((u32 *) GPIO1_OR, in_be32((u32 *) GPIO1_OR) | 0x00060000);
+
+	/* select Ethernet pins */
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+	    SDR0_PFC1_SELECT_CONFIG_4;
+	mfsdr(SDR0_PFC2, sdr0_pfc2);
+	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+	    SDR0_PFC2_SELECT_CONFIG_4;
+	mtsdr(SDR0_PFC2, sdr0_pfc2);
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+	/* PCI arbiter enabled */
+	mfsdr(sdr_pci0, reg);
+	mtsdr(sdr_pci0, 0x80000000 | reg);
+
+	return 0;
+}
+
+static int man_data_read(unsigned int addr)
+{
+	/*
+	 * Read an octet of data from address "addr" in the manufacturer's
+	 * information serial EEPROM, or -1 on error.
+	 */
+	u8 data[2];
+
+	if (0 != i2c_probe(MAN_DATA_EEPROM_ADDR) ||
+	    0 != i2c_read(MAN_DATA_EEPROM_ADDR, addr, 1, data, 1)) {
+		debug("man_data_read(0x%02X) failed\n", addr);
+		return -1;
+	}
+	debug("man_info_read(0x%02X) returned 0x%02X\n", addr, data[0]);
+	return data[0];
+}
+
+static unsigned int man_data_field_addr(unsigned int const field)
+{
+	/*
+	 * The manufacturer's information serial EEPROM contains a sequence of
+	 * zero-delimited fields.  Return the starting address of field "field",
+	 * or 0 on error.
+	 */
+	unsigned addr, i;
+
+	if (0 == field || 'A' != man_data_read(0) || '\0' != man_data_read(1))
+		/* Only format "A" is currently supported */
+		return 0;
+
+	for (addr = 2, i = 1; i < field && addr < 256; ++addr) {
+		if ('\0' == man_data_read(addr))
+			++i;
+	}
+	return (addr < 256) ? addr : 0;
+}
+
+static char *man_data_read_field(char s[], unsigned const field,
+				 unsigned const length)
+{
+	/*
+	 * Place the null-terminated contents of field "field" of length
+	 * "length" from the manufacturer's information serial EEPROM into
+	 * string "s[length + 1]" and return a pointer to s, or return 0 on
+	 * error. In either case the original contents of s[] is not preserved.
+	 */
+	unsigned addr, i;
+
+	addr = man_data_field_addr(field);
+	if (0 == addr || addr + length >= 255)
+		return 0;
+
+	for (i = 0; i < length; ++i) {
+		int const c = man_data_read(addr++);
+
+		if (c <= 0)
+			return 0;
+
+		s[i] = (char)c;
+	}
+	if (0 != man_data_read(addr))
+		return 0;
+
+	s[i] = '\0';
+	return s;
+}
+
+static void set_serial_number(void)
+{
+	/*
+	 * If the environmental variable "serial#" is not set, try to set it
+	 * from the manufacturer's information serial EEPROM.
+	 */
+	char s[MAN_SERIAL_NO_LENGTH + 1];
+
+	if (0 == getenv("serial#") &&
+	    0 != man_data_read_field(s, MAN_SERIAL_NO_FIELD,
+				     MAN_SERIAL_NO_LENGTH))
+		setenv("serial#", s);
+}
+
+static void set_mac_addresses(void)
+{
+	/*
+	 * If the environmental variables "ethaddr" and/or "eth1addr" are not
+	 * set, try to set them from the manufacturer's information serial
+	 * EEPROM.
+	 */
+	char s[MAN_MAC_ADDR_LENGTH + 1];
+
+	if (0 != getenv("ethaddr") && 0 != getenv("eth1addr"))
+		return;
+
+	if (0 == man_data_read_field(s, MAN_MAC_ADDR_FIELD,
+				     MAN_MAC_ADDR_LENGTH))
+		return;
+
+	if (0 == getenv("ethaddr"))
+		setenv("ethaddr", s);
+
+	if (0 == getenv("eth1addr")) {
+		++s[MAN_MAC_ADDR_LENGTH - 1];
+		setenv("eth1addr", s);
+	}
+}
+
+/*---------------------------------------------------------------------------+
+  | misc_init_r.
+  +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+	uint pbcr;
+	int size_val = 0;
+	u32 reg;
+	unsigned long usb2d0cr = 0;
+	unsigned long usb2phy0cr, usb2h0cr = 0;
+	unsigned long sdr0_pfc1;
+	char *act = getenv("usbact");
+
+	/*
+	 * FLASH stuff...
+	 */
+
+	/* Re-do sizing to get full correct info */
+
+	/* adjust flash start and offset */
+	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+	gd->bd->bi_flashoffset = 0;
+
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	switch (gd->bd->bi_flashsize) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	case 32 << 20:
+		size_val = 5;
+		break;
+	case 64 << 20:
+		size_val = 6;
+		break;
+	case 128 << 20:
+		size_val = 7;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+	mtdcr(ebccfga, pb0cr);
+	mtdcr(ebccfgd, pbcr);
+
+	/*
+	 * Re-check to get correct base address
+	 */
+	flash_get_size(gd->bd->bi_flashstart, 0);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff,
+			    &flash_info[0]);
+
+	/* Env protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    CFG_ENV_ADDR_REDUND,
+			    CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1,
+			    &flash_info[0]);
+
+	/*
+	 * USB suff...
+	 */
+	if (act == NULL || strcmp(act, "hostdev") == 0) {
+		/* SDR Setting */
+		mfsdr(SDR0_PFC1, sdr0_pfc1);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;	/*0 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;	/*1 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;	/*1 */
+
+		/* An 8-bit/60MHz interface is the only possible alternative
+		   when connecting the Device to the PHY */
+		usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1 */
+
+		/* To enable the USB 2.0 Device function through the UTMI interface */
+		usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;	/*1 */
+
+		sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;	/*0 */
+
+		mtsdr(SDR0_PFC1, sdr0_pfc1);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+		/*clear resets */
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x00000000);
+		udelay(1000);
+		mtsdr(SDR0_SRST0, 0x00000000);
+
+		printf("USB:   Host(int phy) Device(ext phy)\n");
+
+	} else if (strcmp(act, "dev") == 0) {
+		/*-------------------PATCH-------------------------------*/
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;	/*0 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;	/*1 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;	/*1 */
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x672c6000);
+
+		udelay(1000);
+		mtsdr(SDR0_SRST0, 0x00000080);
+
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x60206000);
+
+		*(unsigned int *)(0xe0000350) = 0x00000001;
+
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x60306000);
+		/*-------------------PATCH-------------------------------*/
+
+		/* SDR Setting */
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2H0CR, usb2h0cr);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
+		mfsdr(SDR0_PFC1, sdr0_pfc1);
+
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;	/*0 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;	/*1 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;	/*0 */
+		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;	/*0 */
+
+		usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;	/*0 */
+
+		usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;	/*0 */
+
+		sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;	/*1 */
+
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
+		mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+		/*clear resets */
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x00000000);
+		udelay(1000);
+		mtsdr(SDR0_SRST0, 0x00000000);
+
+		printf("USB:   Device(int phy)\n");
+	}
+
+	mfsdr(SDR0_SRST1, reg);	/* enable security/kasumi engines */
+	reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
+	mtsdr(SDR0_SRST1, reg);
+
+	/*
+	 * Clear PLB4A0_ACR[WRP]
+	 * This fix will make the MAL burst disabling patch for the Linux
+	 * EMAC driver obsolete.
+	 */
+	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+	mtdcr(plb4_acr, reg);
+
+	set_serial_number();
+	set_mac_addresses();
+	return 0;
+}
+
+int checkboard(void)
+{
+	char const *const s = getenv("serial#");
+	u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0);
+	u32 const gpio0_or = in_be32((u32 *) GPIO0_OR);
+
+	printf("Board: Korat, Rev. %X", rev);
+	if (s != NULL)
+		printf(", serial# %s", s);
+
+	printf(", Ethernet PHY 0: ");
+	if (gpio0_or & 0x00000010)
+		printf("fiber");
+	else
+		printf("copper");
+
+	printf(", PHY 1: ");
+	if (gpio0_or & 0x00000008)
+		printf("fiber");
+	else
+		printf("copper");
+
+	printf(".\n");
+	return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	unsigned long *mem = (unsigned long *)0;
+	const unsigned long kend = (1024 / sizeof(unsigned long));
+	unsigned long k, n;
+
+	mtmsr(0);
+
+	/* TODO: find correct size of SDRAM */
+	for (k = 0; k < CFG_MBYTES_SDRAM;
+	     ++k, mem += (1024 / sizeof(unsigned long))) {
+		if ((k & 1023) == 0)
+			printf("%3d MB\r", k / 1024);
+
+		memset(mem, 0xaaaaaaaa, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0xaaaaaaaa) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+
+		memset(mem, 0x55555555, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0x55555555) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+	}
+	printf("SDRAM test passes\n");
+	return 0;
+}
+#endif /* defined(CFG_DRAM_TEST) */
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long addr;
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB3 devices to 0.
+	  | Set PLB3 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB4 devices to 0.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*-------------------------------------------------------------------------+
+	  | Set Nebula PLB4 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+	return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------------+
+	  | PowerPC440EPX PCI Master configuration.
+	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+	  |   Use byte reversed out routines to handle endianess.
+	  | Make this region non-prefetchable.
+	  +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers for on-board NEC uPD720101 USB controller
+	 *--------------------------------------------------------------------------*/
+	pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*--------------------------------------------------------------------------+
+	  | Write the PowerPC440 EP PCI Configuration regs.
+	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	  +--------------------------------------------------------------------------*/
+	pci_read_config_word(0, PCI_COMMAND, &temp_short);
+	pci_write_config_word(0, PCI_COMMAND,
+			      temp_short | PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY);
+}
+#endif
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* Korat is always configured as host. */
+	return (1);
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;		/* No hotkeys supported */
+}
+#endif
diff --git a/board/korat/u-boot.lds b/board/korat/u-boot.lds
new file mode 100644
index 000000000..a423f9828
--- /dev/null
+++ b/board/korat/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 77f998971..9b24a7e55 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -96,6 +96,23 @@ int board_early_init_f(void)
 
 	gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
 
+	/*
+	 * Reset PHY's:
+	 * The PHY's need a 2nd reset pulse, since the MDIO address is latched
+	 * upon reset, and with the first reset upon powerup, the addresses are
+	 * not latched reliable, since the IRQ line is multiplexed with an
+	 * MDIO address. A 2nd reset at this time will make sure, that the
+	 * correct address is latched.
+	 */
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
 	return 0;
 }
 
@@ -231,15 +248,6 @@ int misc_init_r(void)
 	out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
 
 	/*
-	 * Reset PHY's
-	 */
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
-	udelay(100);
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
-
-	/*
 	 * Init display controller
 	 */
 	/* Setup dot clock (internal PLL, division rate 1/16) */
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index d4547e24c..399da8ae6 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -71,7 +71,7 @@ static u32 is_ecc_enabled(void)
 
 void board_add_ram_info(int use_default)
 {
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 	u32 val;
 
 	if (is_ecc_enabled())
diff --git a/board/lwmon5/sdram.h b/board/lwmon5/sdram.h
index 7f847aa2a..6a7bf01ef 100644
--- a/board/lwmon5/sdram.h
+++ b/board/lwmon5/sdram.h
@@ -395,8 +395,8 @@
 #define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
 #define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
 #define DDR0_26_TREF_MASK                 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FFF)
 
 #define DDR0_27                         0x1B
 #define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
diff --git a/board/ml2/u-boot.lds b/board/ml2/u-boot.lds
index f8e9e3374..26df77bb9 100644
--- a/board/ml2/u-boot.lds
+++ b/board/ml2/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds
index eb4d8e4e2..57358b8a4 100644
--- a/board/mousse/u-boot.lds
+++ b/board/mousse/u-boot.lds
@@ -60,6 +60,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_generic/zlib.o		(.text)
 
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
index 3b3c8ed26..64dfe0930 100644
--- a/board/mpc8540eval/mpc8540eval.c
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -35,8 +35,7 @@ long int fixed_sdram (void);
 int board_pre_init (void)
 {
 #if defined(CONFIG_PCI)
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-	volatile ccsr_pcix_t *pci = &immr->im_pcix;
+	volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
 
 	pci->peer &= 0xffffffdf; /* disable master abort */
 #endif
@@ -68,14 +67,13 @@ long int initdram (int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
 #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur= &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 #endif
 
 #if defined(CONFIG_DDR_DLL)
@@ -138,8 +136,7 @@ long int initdram (int board_type)
 		 * enable errors */
 		uint *p = 0;
 		uint i = 0;
-		volatile immap_t *immap = (immap_t *)CFG_IMMR;
-		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+		volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 		dma_init();
 		for (*p = 0; p < (uint *)(8 * 1024); p++) {
 			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
@@ -222,8 +219,7 @@ int testdram (void)
 long int fixed_sdram (void)
 {
 #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 
 	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
 	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 278ad5c34..8d4cbe852 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -36,11 +36,11 @@
 
 #ifdef CONFIG_PIP405
 #include "../pip405/pip405.h"
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 #endif
 #ifdef CONFIG_MIP405
 #include "../mip405/mip405.h"
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -587,7 +587,7 @@ extern int get_boot_mode(void);
 void video_get_info_str (int line_number, char *info)
 {
 	/* init video info strings for graphic console */
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 	char rev;
 	int i,boot;
 	unsigned long pvr;
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index fd430083e..6f53192ac 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -47,7 +47,7 @@
 #if defined(CONFIG_PIP405)
 #include "../pip405/pip405.h"
 #endif
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 #else /* defined(CONFIG_PATI) */
 #include <mpc5xx.h>
 #endif
diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds
index ad5f2739c..dceb39063 100644
--- a/board/mpl/mip405/u-boot.lds
+++ b/board/mpl/mip405/u-boot.lds
@@ -70,7 +70,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/mpl/pip405/u-boot.lds b/board/mpl/pip405/u-boot.lds
index 11819a4fc..685f90382 100644
--- a/board/mpl/pip405/u-boot.lds
+++ b/board/mpl/pip405/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index 227c49272..90a1b08e2 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -31,7 +31,7 @@
 #include "../common/common_util.h"
 
 #if defined(CONFIG_DRIVER_CS8900)
-#include <../drivers/cs8900.h>
+#include <../drivers/net/cs8900.h>
 
 static uchar cs8900_chksum(ushort data)
 {
diff --git a/board/mpl/vcma9/flash.c b/board/mpl/vcma9/flash.c
index ccfe1768f..d15a19115 100644
--- a/board/mpl/vcma9/flash.c
+++ b/board/mpl/vcma9/flash.c
@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
index 7a3234374..220b7053b 100644
--- a/board/mpl/vcma9/vcma9.h
+++ b/board/mpl/vcma9/vcma9.h
@@ -128,7 +128,7 @@ typedef struct {
 } /*__attribute__((__packed__))*/ VCMA9_PLD;
 
 #define VCMA9_PLD_BASE	0x2C000100
-static inline VCMA9_PLD * const VCMA9_GetBase_PLD(void)
+static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
 {
 	return (VCMA9_PLD * const)VCMA9_PLD_BASE;
 }
diff --git a/board/ms7722se/Makefile b/board/ms7722se/Makefile
new file mode 100644
index 000000000..6dec0136c
--- /dev/null
+++ b/board/ms7722se/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# Copyright (C) 2007
+# Kenati Technologies, Inc.
+#
+# board/ms7722se/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= ms7722se.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/ms7722se/config.mk b/board/ms7722se/config.mk
new file mode 100644
index 000000000..4797d6f8f
--- /dev/null
+++ b/board/ms7722se/config.mk
@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# Copyright (C) 2007
+# Kenati Technologies, Inc.
+#
+# board/ms7722se/config.mk
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S
new file mode 100644
index 000000000..2024e27ff
--- /dev/null
+++ b/board/ms7722se/lowlevel_init.S
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2007
+ * Kenati Technologies, Inc.
+ *
+ * board/ms7722se/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+
+/*
+ *  Board specific low level init code, called _very_ early in the
+ *  startup sequence. Relocation to SDRAM has not happened yet, no
+ *  stack is available, bss section has not been initialised, etc.
+ *
+ *  (Note: As no stack is available, no subroutines can be called...).
+ */
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+
+	mov.l	CCR_A, r1	! Address of Cache Control Register
+	mov.l	CCR_D, r0	! Instruction Cache Invalidate
+	mov.l	r0, @r1
+
+	mov.l	MMUCR_A, r1	! Address of MMU Control Register
+	mov.l	MMUCR_D, r0	! TI == TLB Invalidate bit
+	mov.l	r0, @r1
+
+	mov.l	MSTPCR0_A, r1	! Address of Power Control Register 0
+	mov.l	MSTPCR0_D, r0	!
+	mov.l	r0, @r1
+
+	mov.l	MSTPCR2_A, r1	! Address of Power Control Register 2
+	mov.l	MSTPCR2_D, r0	!
+	mov.l	r0, @r1
+
+	mov.l	SBSCR_A, r1	!
+	mov.w	SBSCR_D, r0	!
+	mov.w	r0, @r1
+
+	mov.l	PSCR_A, r1	!
+	mov.w	PSCR_D, r0	!
+	mov.w	r0, @r1
+
+!	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
+!	mov.w	RWTCSR_D_1, r0	! 0xA507 -> timer_STOP/WDT_CLK=max
+!	mov.w	r0, @r1
+
+	mov.l	RWTCNT_A, r1	! 0xA4520000 (Watchdog Count Register)
+	mov.w	RWTCNT_D, r0	! 0x5A00 -> Clear
+	mov.w	r0, @r1
+
+	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
+	mov.w	RWTCSR_D_2, r0	! 0xA504 -> timer_STOP/CLK=500ms
+	mov.w	r0, @r1
+
+	mov.l	FRQCR_A, r1		! 0xA4150000 Frequency control register
+	mov.l	FRQCR_D, r0	!
+	mov.l	r0, @r1
+
+	mov.l	CCR_A, r1		! Address of Cache Control Register
+	mov.l	CCR_D_2, r0	! ??
+	mov.l	r0, @r1
+
+bsc_init:
+
+	mov.l	PSELA_A, r1
+	mov.w	PSELA_D, r0
+	mov.w	r0, @r1
+
+	mov.l	DRVCR_A, r1
+	mov.w	DRVCR_D, r0
+	mov.w	r0, @r1
+
+	mov.l	PCCR_A, r1
+	mov.w	PCCR_D, r0
+	mov.w	r0, @r1
+
+	mov.l	PECR_A, r1
+	mov.w	PECR_D, r0
+	mov.w	r0, @r1
+
+	mov.l	PJCR_A, r1
+	mov.w	PJCR_D, r0
+	mov.w	r0, @r1
+
+	mov.l	PXCR_A, r1
+	mov.w	PXCR_D, r0
+	mov.w	r0, @r1
+
+	mov.l	CMNCR_A, r1	! CMNCR address -> R1
+	mov.l 	CMNCR_D, r0	! CMNCR data    -> R0
+	mov.l	r0, @r1		! CMNCR set
+
+	mov.l	CS0BCR_A, r1	! CS0BCR address -> R1
+	mov.l 	CS0BCR_D, r0	! CS0BCR data    -> R0
+	mov.l	r0, @r1		! CS0BCR set
+
+	mov.l	CS2BCR_A, r1	! CS2BCR address -> R1
+	mov.l	CS2BCR_D, r0	! CS2BCR data    -> R0
+	mov.l	r0, @r1		! CS2BCR set
+
+	mov.l	CS4BCR_A, r1	! CS4BCR address -> R1
+	mov.l	CS4BCR_D, r0	! CS4BCR data    -> R0
+	mov.l	r0, @r1		! CS4BCR set
+
+	mov.l	CS5ABCR_A, r1	! CS5ABCR address -> R1
+	mov.l 	CS5ABCR_D, r0	! CS5ABCR data    -> R0
+	mov.l	r0, @r1		! CS5ABCR set
+
+	mov.l	CS5BBCR_A, r1	! CS5BBCR address -> R1
+	mov.l 	CS5BBCR_D, r0	! CS5BBCR data    -> R0
+	mov.l	r0, @r1		! CS5BBCR set
+
+	mov.l	CS6ABCR_A, r1	! CS6ABCR address -> R1
+	mov.l 	CS6ABCR_D, r0	! CS6ABCR data    -> R0
+	mov.l	r0, @r1		! CS6ABCR set
+
+	mov.l	CS0WCR_A, r1	! CS0WCR address -> R1
+	mov.l 	CS0WCR_D, r0	! CS0WCR data    -> R0
+	mov.l	r0, @r1		! CS0WCR set
+
+	mov.l	CS2WCR_A, r1	! CS2WCR address -> R1
+	mov.l 	CS2WCR_D, r0	! CS2WCR data    -> R0
+	mov.l	r0, @r1		! CS2WCR set
+
+	mov.l	CS4WCR_A, r1	! CS4WCR address -> R1
+	mov.l 	CS4WCR_D, r0	! CS4WCR data    -> R0
+	mov.l	r0, @r1		! CS4WCR set
+
+	mov.l	CS5AWCR_A, r1	! CS5AWCR address -> R1
+	mov.l 	CS5AWCR_D, r0	! CS5AWCR data    -> R0
+	mov.l	r0, @r1		! CS5AWCR set
+
+	mov.l	CS5BWCR_A, r1	! CS5BWCR address -> R1
+	mov.l 	CS5BWCR_D, r0	! CS5BWCR data    -> R0
+	mov.l	r0, @r1		! CS5BWCR set
+
+	mov.l	CS6AWCR_A, r1	! CS6AWCR address -> R1
+	mov.l 	CS6AWCR_D, r0	! CS6AWCR data    -> R0
+	mov.l	r0, @r1		! CS6AWCR set
+
+	! SDRAM initialization
+	mov.l	SDCR_A, r1	! SB_SDCR address -> R1
+	mov.l	SDCR_D, r0	! SB_SDCR data    -> R0
+	mov.l	r0, @r1		! SB_SDCR set
+
+	mov.l	SDWCR_A, r1	! SB_SDWCR address -> R1
+	mov.l	SDWCR_D, r0	! SB_SDWCR data    -> R0
+	mov.l	r0, @r1		! SB_SDWCR set
+
+	mov.l	SDPCR_A, r1	! SB_SDPCR address -> R1
+	mov.l	SDPCR_D, r0	! SB_SDPCR data    -> R0
+	mov.l	r0, @r1		! SB_SDPCR set
+
+	mov.l	RTCOR_A, r1	! SB_RTCOR address -> R1
+	mov.l	RTCOR_D, r0	! SB_RTCOR data    -> R0
+	mov.l	r0, @r1		! SB_RTCOR set
+
+	mov.l	RTCSR_A, r1	! SB_RTCSR address -> R1
+	mov.l	RTCSR_D, r0	! SB_RTCSR data    -> R0
+	mov.l	r0, @r1		! SB_RTCSR set
+
+	mov.l	SDMR3_A, r1	! SDMR3 address -> R1
+	mov 	#0x00, r0	! SDMR3 data    -> R0
+	mov.b	r0, @r1		! SDMR3 set
+
+	! BL bit off (init = ON)  (?!?)
+
+	stc	sr, r0				! BL bit off(init=ON)
+	mov.l	SR_MASK_D, r1
+	and	r1, r0
+	ldc	r0, sr
+
+	rts
+	mov	#0, r0
+
+	.align	2
+
+CCR_A:		.long	CCR
+MMUCR_A:	.long	MMUCR
+MSTPCR0_A:	.long	MSTPCR0
+MSTPCR2_A:	.long	MSTPCR2
+SBSCR_A:	.long	SBSCR
+PSCR_A:		.long	PSCR
+RWTCSR_A:	.long	RWTCSR
+RWTCNT_A:	.long	RWTCNT
+FRQCR_A:	.long	FRQCR
+
+CCR_D:		.long	0x00000800
+CCR_D_2:	.long	0x00000103
+MMUCR_D:	.long	0x00000004
+MSTPCR0_D:	.long	0x00001001
+MSTPCR2_D:	.long	0xffffffff
+FRQCR_D:	.long	0x07022538
+
+PSELA_A:	.long   0xa405014E
+PSELA_D:	.word   0x0A10
+	.align 2
+
+DRVCR_A:	.long   0xa405018A
+DRVCR_D:	.word   0x0554
+	.align 2
+
+PCCR_A:		.long   0xa4050104
+PCCR_D:		.word   0x8800
+	.align 2
+
+PECR_A:		.long   0xa4050108
+PECR_D:		.word   0x0000
+	.align 2
+
+PJCR_A:		.long   0xa4050110
+PJCR_D:		.word   0x1000
+	.align 2
+
+PXCR_A:		.long   0xa4050148
+PXCR_D:		.word   0x0AAA
+	.align 2
+
+CMNCR_A:	.long	CMNCR
+CMNCR_D:	.long	0x00000013
+CS0BCR_A:	.long	CS0BCR		! Flash bank 1
+CS0BCR_D:	.long	0x24920400
+CS2BCR_A:	.long	CS2BCR		! SRAM
+CS2BCR_D:	.long	0x24920400
+CS4BCR_A:	.long	CS4BCR		! FPGA, PCMCIA, USB, ext slot
+CS4BCR_D:	.long	0x24920400
+CS5ABCR_A:	.long	CS5ABCR		! Ext slot
+CS5ABCR_D:	.long	0x24920400
+CS5BBCR_A:	.long	CS5BBCR		! USB controller
+CS5BBCR_D:	.long	0x24920400
+CS6ABCR_A:	.long	CS6ABCR		! Ethernet
+CS6ABCR_D:	.long	0x24920400
+
+CS0WCR_A:	.long	CS0WCR
+CS0WCR_D:	.long	0x00000300
+CS2WCR_A:	.long	CS2WCR
+CS2WCR_D:	.long	0x00000300
+CS4WCR_A:	.long	CS4WCR
+CS4WCR_D:	.long	0x00000300
+CS5AWCR_A:	.long	CS5AWCR
+CS5AWCR_D:	.long	0x00000300
+CS5BWCR_A:	.long	CS5BWCR
+CS5BWCR_D:	.long	0x00000300
+CS6AWCR_A:	.long	CS6AWCR
+CS6AWCR_D:	.long	0x00000300
+
+SDCR_A:		.long	SBSC_SDCR
+SDCR_D:		.long	0x00020809
+SDWCR_A:	.long	SBSC_SDWCR
+SDWCR_D:	.long	0x00164d0d
+SDPCR_A:	.long	SBSC_SDPCR
+SDPCR_D:	.long	0x00000087
+RTCOR_A:	.long	SBSC_RTCOR
+RTCOR_D:	.long	0xA55A0034
+RTCSR_A:	.long	SBSC_RTCSR
+RTCSR_D:	.long	0xA55A0010
+SDMR3_A:	.long	0xFE500180
+
+	.align	1
+
+SBSCR_D:	.word	0x0040
+PSCR_D:		.word	0x0000
+RWTCSR_D_1:	.word	0xA507
+RWTCSR_D_2:	.word	0xA507
+RWTCNT_D:	.word	0x5A00
+
+SR_MASK_D:	.long	0xEFFFFF0F
diff --git a/board/ms7722se/ms7722se.c b/board/ms7722se/ms7722se.c
new file mode 100644
index 000000000..0d3d55cf5
--- /dev/null
+++ b/board/ms7722se/ms7722se.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2007
+ * Kenati Technologies, Inc.
+ *
+ * board/ms7722se/ms7722se.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#define LED_BASE	0xB0800000
+
+int checkboard(void)
+{
+	puts("BOARD: Hitachi UL MS7722SE\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Setup PTXMD[1:0] for /CS6A */
+	outw(inw(PXCR) & ~0xf000, PXCR);
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_memstart = CFG_SDRAM_BASE;
+	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
+
+void led_set_state (unsigned short value)
+{
+	*((volatile unsigned short *) LED_BASE) = (value & 0xFF);
+}
diff --git a/board/ms7722se/u-boot.lds b/board/ms7722se/u-boot.lds
new file mode 100644
index 000000000..692bc6291
--- /dev/null
+++ b/board/ms7722se/u-boot.lds
@@ -0,0 +1,105 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+	/*
+	   Base address of internal SDRAM is 0x0C000000.
+	   Although size of SDRAM can be either 16 or 32 MBytes,
+	   we assume 16 MBytes (ie ignore upper half if the full
+	   32 MBytes is present).
+
+	   NOTE: This address must match with the definition of
+	   TEXT_BASE in config.mk (in this directory).
+
+	*/
+	. = 0x8C000000 + (64*1024*1024) - (256*1024);
+
+	PROVIDE (reloc_dst = .);
+
+	PROVIDE (_ftext = .);
+	PROVIDE (_fcode = .);
+	PROVIDE (_start = .);
+
+	.text :
+	{
+		cpu/sh4/start.o		(.text)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenv)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenvr)
+		. = ALIGN(8192);
+		*(.text)
+		. = ALIGN(4);
+	} =0xFF
+	PROVIDE (_ecode = .);
+	.rodata :
+	{
+		*(.rodata)
+		. = ALIGN(4);
+	}
+	PROVIDE (_etext = .);
+
+
+	PROVIDE (_fdata = .);
+	.data :
+	{
+		*(.data)
+		. = ALIGN(4);
+	}
+	PROVIDE (_edata = .);
+
+	PROVIDE (_fgot = .);
+	.got :
+	{
+		*(.got)
+		. = ALIGN(4);
+	}
+	PROVIDE (_egot = .);
+
+	PROVIDE (__u_boot_cmd_start = .);
+	.u_boot_cmd :
+	{
+		*(.u_boot_cmd)
+		. = ALIGN(4);
+	}
+	PROVIDE (__u_boot_cmd_end = .);
+
+	PROVIDE (reloc_dst_end = .);
+	/* _reloc_dst_end = .; */
+
+	PROVIDE (bss_start = .);
+	PROVIDE (__bss_start = .);
+	.bss :
+	{
+		*(.bss)
+		. = ALIGN(4);
+	}
+	PROVIDE (bss_end = .);
+
+	PROVIDE (_end = .);
+}
diff --git a/board/ms7750se/Makefile b/board/ms7750se/Makefile
new file mode 100644
index 000000000..f81d56cb4
--- /dev/null
+++ b/board/ms7750se/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= ms7750se.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+	$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#################################################################
diff --git a/board/ms7750se/config.mk b/board/ms7750se/config.mk
new file mode 100644
index 000000000..1eed5802e
--- /dev/null
+++ b/board/ms7750se/config.mk
@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7750se/lowlevel_init.S b/board/ms7750se/lowlevel_init.S
new file mode 100644
index 000000000..d3e3cd5e8
--- /dev/null
+++ b/board/ms7750se/lowlevel_init.S
@@ -0,0 +1,179 @@
+/*
+ modified from SH-IPL+g
+ Renesaso SuperH / Solution Enginge MS775xSE01 BSC setting.
+
+ Support CPU : SH7750/SH7750S/SH7750R/SH7751/SH7751R
+
+ Coyright (c) 2007 Nobuhiro Iwamatsu <iwmatsu@nigauri.org>
+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+*/
+
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+
+#ifdef CONFIG_CPU_SH7751
+#define BCR2_D_VALUE	0x2FFC	   /* Area 1-6 width: 32/32/32/32/32/16 */
+#define WCR1_D_VALUE    0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */
+#ifdef CONFIG_MARUBUN_PCCARD
+#define WCR2_D_VALUE    0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15
+				      A3:2  A2:15 A1:15 A0:6  A0B:7  */
+#else /* CONFIG_MARUBUN_PCCARD */
+#define WCR2_D_VALUE    0x7FFE4FE7 /* A6:3  A6B:7 A5:15 A5B:7 A4:15
+				      A3:2  A2:15 A1:15 A0:6  A0B:7  */
+#endif /* CONFIG_MARUBUN_PCCARD */
+#define WCR3_D_VALUE	0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3
+				      A2: 1-3 A1: 1-3 A0: 0-1 */
+#define RTCOR_D_VALUE	0xA50D	   /* Write code A5, data 0D (~15us?) */
+#define SDMR3_ADDRESS	0xFF940088 /* SDMR3 address on 32-bit bus */
+#define MCR_D1_VALUE	0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, ... */
+#define MCR_D2_VALUE	0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */
+#else /* CONFIG_CPU_SH7751 */
+#define BCR2_D_VALUE	0x2E3C	   /* Area 1-6 width: 32/32/64/16/32/16 */
+#define WCR1_D_VALUE	0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */
+#define WCR2_D_VALUE	0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15
+				      A3:2  A2:15 A1:15 A0:15 A0B:7  */
+#define WCR3_D_VALUE	0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3
+				      A2: 1-3 A1: 1-3 A0: 0-1 */
+#define RTCOR_D_VALUE	0xA510	   /* Write code A5, data 10 (~15us?) */
+#define SDMR3_ADDRESS	0xFF940110 /* SDMR3 address on 64-bit bus */
+#define MCR_D1_VALUE	0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, ... */
+#define MCR_D2_VALUE	0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */
+#endif /* CONFIG_CPU_SH7751 */
+
+	.global lowlevel_init
+	.text
+	.align  2
+
+lowlevel_init:
+
+	mov.l   CCR_A, r1               ! CCR Address
+	mov.l   CCR_D_DISABLE, r0       ! CCR Data
+	mov.l   r0, @r1
+
+init_bsc:
+	mov.l	FRQCR_A,r1	/* FRQCR Address */
+	mov.l	FRQCR_D,r0	/* FRQCR Data */
+	mov.w	r0,@r1
+
+	mov.l	BCR1_A,r1	/* BCR1 Address */
+	mov.l	BCR1_D,r0	/* BCR1 Data */
+	mov.l	r0,@r1
+
+	mov.l	BCR2_A,r1	/* BCR2 Address */
+	mov.l	BCR2_D,r0	/* BCR2 Data */
+	mov.w	r0,@r1
+
+	mov.l	WCR1_A,r1	/* WCR1 Address */
+	mov.l	WCR1_D,r0	/* WCR1 Data */
+	mov.l	r0,@r1
+
+	mov.l	WCR2_A,r1	/* WCR2 Address */
+	mov.l	WCR2_D,r0	/* WCR2 Data */
+	mov.l	r0,@r1
+
+	mov.l	WCR3_A,r1	/* WCR3 Address */
+	mov.l	WCR3_D,r0	/* WCR3 Data */
+	mov.l	r0,@r1
+
+	mov.l	MCR_A,r1	/* MCR Address */
+	mov.l	MCR_D1,r0	/* MCR Data1 */
+	mov.l	r0,@r1
+
+	mov.l	SDMR3_A,r1	/* Set SDRAM mode */
+	mov	#0,r0
+	mov.b	r0,@r1
+
+	! Do you need PCMCIA setting?
+	! If so, please add the lines here...
+
+	mov.l	RTCNT_A,r1	/* RTCNT Address */
+	mov.l	RTCNT_D,r0	/* RTCNT Data */
+	mov.w	r0,@r1
+
+	mov.l	RTCOR_A,r1	/* RTCOR Address */
+	mov.l	RTCOR_D,r0	/* RTCOR Data */
+	mov.w	r0,@r1
+
+	mov.l	RTCSR_A,r1	/* RTCSR Address */
+	mov.l	RTCSR_D,r0	/* RTCSR Data */
+	mov.w	r0,@r1
+
+	mov.l	RFCR_A,r1	/* RFCR Address */
+	mov.l	RFCR_D,r0	/* RFCR Data */
+	mov.w	r0,@r1		/* Clear reflesh counter */
+	/* Wait DRAM refresh 30 times */
+	mov	#30,r3
+1:
+	mov.w	@r1,r0
+	extu.w	r0,r2
+	cmp/hi	r3,r2
+	bf	1b
+
+	mov.l	MCR_A,r1	/* MCR Address */
+	mov.l	MCR_D2,r0	/* MCR Data2 */
+	mov.l	r0,@r1
+
+	mov.l	SDMR3_A,r1	/* Set SDRAM mode */
+	mov	#0,r0
+	mov.b	r0,@r1
+
+	rts
+	 nop
+
+	.align	2
+
+CCR_A:          .long   CCR
+CCR_D_DISABLE:  .long   0x0808
+FRQCR_A:	.long	FRQCR
+FRQCR_D:
+#ifdef CONFIG_CPU_TYPE_R
+		.long	0x00000e1a	/* 12:3:3 */
+#else	/* CONFIG_CPU_TYPE_R */
+#ifdef CONFIG_GOOD_SESH4
+		.long	0x00000e13	/* 6:2:1 */
+#else
+		.long	0x00000e23	/* 6:1:1 */
+#endif
+#endif	/* CONFIG_CPU_TYPE_R */
+
+BCR1_A:		.long	BCR1
+BCR1_D:		.long	0x00000008	/* Area 3 SDRAM */
+BCR2_A:		.long	BCR2
+BCR2_D:		.long	BCR2_D_VALUE	/* Bus width settings */
+WCR1_A:		.long	WCR1
+WCR1_D:		.long	WCR1_D_VALUE	/* Inter-area or turnaround wait states */
+WCR2_A:		.long	WCR2
+WCR2_D:		.long	WCR2_D_VALUE	/* Per-area access and burst wait states */
+WCR3_A:		.long	WCR3
+WCR3_D:		.long	WCR3_D_VALUE	/* Address setup and data hold cycles */
+RTCSR_A:	.long	RTCSR
+RTCSR_D:	.long	0xA518		/* RTCSR Write Code A5h Data 18h */
+RTCNT_A:	.long	RTCNT
+RTCNT_D:	.long	0xA500		/* RTCNT Write Code A5h Data 00h */
+RTCOR_A:	.long	RTCOR
+RTCOR_D:	.long	RTCOR_D_VALUE	/* Set refresh time (about 15us) */
+SDMR3_A:	.long	SDMR3_ADDRESS
+MCR_A:		.long	MCR
+MCR_D1:		.long	MCR_D1_VALUE
+MCR_D2:		.long	MCR_D2_VALUE
+RFCR_A:		.long	RFCR
+RFCR_D:		.long	0xA400		/* RFCR Write Code A4h Data 00h */
diff --git a/board/mpc8568mds/ft_board.c b/board/ms7750se/ms7750se.c
index 36815ccfb..d2d824c5a 100644
--- a/board/mpc8568mds/ft_board.c
+++ b/board/ms7750se/ms7750se.c
@@ -1,5 +1,6 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor.
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -11,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -21,25 +22,30 @@
  */
 
 #include <common.h>
+#include <asm/processor.h>
 
-#include <ft_build.h>
+int checkboard(void)
+{
+	puts("BOARD: SH7750/SH7750S/SH7750R Solution Engine\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
 
-extern void ft_cpu_setup(void *blob, bd_t *bd);
+	gd->bd->bi_memstart = CFG_SDRAM_BASE;
+	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int board_late_init(void)
 {
-	u32 *p;
-	int len;
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p != NULL) {
-		*p++ = cpu_to_be32(bd->bi_memstart);
-		*p = cpu_to_be32(bd->bi_memsize);
-	}
+	return 0;
 }
-#endif /* CONFIG_OF_FLAT_TREE && CONFIG_OF_BOARD_SETUP */
diff --git a/board/ms7750se/u-boot.lds b/board/ms7750se/u-boot.lds
new file mode 100644
index 000000000..692bc6291
--- /dev/null
+++ b/board/ms7750se/u-boot.lds
@@ -0,0 +1,105 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+	/*
+	   Base address of internal SDRAM is 0x0C000000.
+	   Although size of SDRAM can be either 16 or 32 MBytes,
+	   we assume 16 MBytes (ie ignore upper half if the full
+	   32 MBytes is present).
+
+	   NOTE: This address must match with the definition of
+	   TEXT_BASE in config.mk (in this directory).
+
+	*/
+	. = 0x8C000000 + (64*1024*1024) - (256*1024);
+
+	PROVIDE (reloc_dst = .);
+
+	PROVIDE (_ftext = .);
+	PROVIDE (_fcode = .);
+	PROVIDE (_start = .);
+
+	.text :
+	{
+		cpu/sh4/start.o		(.text)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenv)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenvr)
+		. = ALIGN(8192);
+		*(.text)
+		. = ALIGN(4);
+	} =0xFF
+	PROVIDE (_ecode = .);
+	.rodata :
+	{
+		*(.rodata)
+		. = ALIGN(4);
+	}
+	PROVIDE (_etext = .);
+
+
+	PROVIDE (_fdata = .);
+	.data :
+	{
+		*(.data)
+		. = ALIGN(4);
+	}
+	PROVIDE (_edata = .);
+
+	PROVIDE (_fgot = .);
+	.got :
+	{
+		*(.got)
+		. = ALIGN(4);
+	}
+	PROVIDE (_egot = .);
+
+	PROVIDE (__u_boot_cmd_start = .);
+	.u_boot_cmd :
+	{
+		*(.u_boot_cmd)
+		. = ALIGN(4);
+	}
+	PROVIDE (__u_boot_cmd_end = .);
+
+	PROVIDE (reloc_dst_end = .);
+	/* _reloc_dst_end = .; */
+
+	PROVIDE (bss_start = .);
+	PROVIDE (__bss_start = .);
+	.bss :
+	{
+		*(.bss)
+		. = ALIGN(4);
+	}
+	PROVIDE (bss_end = .);
+
+	PROVIDE (_end = .);
+}
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index 9ee9ab599..cbb2839cc 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -72,7 +72,7 @@ void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
 
 void board_add_ram_info(int use_default)
 {
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 	u32 val;
 	mfsdram(DDR0_22, val);
 	val &= DDR0_22_CTRL_RAW_MASK;
diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c
index fef3822aa..0de594b65 100644
--- a/board/netstar/eeprom.c
+++ b/board/netstar/eeprom.c
@@ -26,7 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
 
diff --git a/board/pb1x00/Makefile b/board/pb1x00/Makefile
index f7d58416c..afe02c27c 100644
--- a/board/pb1x00/Makefile
+++ b/board/pb1x00/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	= $(BOARD).o flash.o
-SOBJS	= memsetup.o
+SOBJS	= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/pb1x00/memsetup.S b/board/pb1x00/lowlevel_init.S
index 44f02b955..e851e2fed 100644
--- a/board/pb1x00/memsetup.S
+++ b/board/pb1x00/lowlevel_init.S
@@ -15,8 +15,8 @@
 	.set noreorder
 	.set mips32
 
-	.globl	memsetup
-memsetup:
+	.globl	lowlevel_init
+lowlevel_init:
 	/*
 	 * Step 1) Establish CPU endian mode.
 	 * NOTE: A fair amount of code is necessary on the Pb1000 to
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
index 40ac2a4d7..536c9544f 100644
--- a/board/pb1x00/pb1x00.c
+++ b/board/pb1x00/pb1x00.c
@@ -25,6 +25,7 @@
 #include <command.h>
 #include <asm/au1x00.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 
 long int initdram(int board_type)
 {
@@ -41,7 +42,9 @@ void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
 
 int checkboard (void)
 {
+#if defined(CONFIG_IDE_PCMCIA) && 0
 	u16 status;
+#endif
 	/* volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10); */
 	volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
 	u32 proc_id;
@@ -69,6 +72,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #if defined(CONFIG_IDE_PCMCIA) && 0
 	/* Enable 3.3 V on slot 0 ( VCC )
 	   No 5V */
diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds
index 363d974c4..861873272 100644
--- a/board/pb1x00/u-boot.lds
+++ b/board/pb1x00/u-boot.lds
@@ -54,9 +54,11 @@ SECTIONS
 
 	.sdata  : { *(.sdata) }
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/board/pleb2/flash.c b/board/pleb2/flash.c
index 97271d921..5a1eba6b3 100644
--- a/board/pleb2/flash.c
+++ b/board/pleb2/flash.c
@@ -196,7 +196,7 @@ void flash_print_info (flash_info_t * info)
 	int i;
 	uchar *boottype;
 	uchar *bootletter;
-	uchar *fmt;
+	char *fmt;
 	uchar botbootletter[] = "B";
 	uchar topbootletter[] = "T";
 	uchar botboottype[] = "bottom boot sector";
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index 6ead1d063..999d8b525 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -45,8 +45,7 @@ long int fixed_sdram(void);
 int board_early_init_f (void)
 {
 #if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+    volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
 
     pci->peer &= 0xffffffdf; /* disable master abort */
 #endif
@@ -79,13 +78,12 @@ initdram(int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
+	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	    int i,x;
 
 	    x = 10;
@@ -133,9 +131,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -229,8 +226,7 @@ int testdram (void)
 long int fixed_sdram (void)
 {
   #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 
 	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
 	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index a10075451..bfde6959b 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -232,13 +232,12 @@ initdram(int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 	puts("Initializing\n");
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur= &immap->im_gur;
+	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	    int i,x;
 
 	    x = 10;
@@ -287,9 +286,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -382,8 +380,7 @@ int testdram (void)
 long int fixed_sdram (void)
 {
   #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 
 	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
 	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds
index 4f04089c9..697801e3f 100644
--- a/board/prodrive/alpr/u-boot.lds
+++ b/board/prodrive/alpr/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/prodrive/alpr/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/prodrive/p3p440/u-boot.lds b/board/prodrive/p3p440/u-boot.lds
index 92bb740e4..0540a46e4 100644
--- a/board/prodrive/p3p440/u-boot.lds
+++ b/board/prodrive/p3p440/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/prodrive/p3p440/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/purple/flash.c b/board/purple/flash.c
index 752258080..1baae35eb 100644
--- a/board/purple/flash.c
+++ b/board/purple/flash.c
@@ -299,7 +299,7 @@ void flash_print_info (flash_info_t *info)
 	int i;
 	uchar *boottype;
 	uchar *bootletter;
-	uchar *fmt;
+	char *fmt;
 	uchar botbootletter[] = "B";
 	uchar topbootletter[] = "T";
 	uchar botboottype[] = "bottom boot sector";
diff --git a/board/purple/purple.c b/board/purple/purple.c
index 4c3e5b44b..74718afb4 100644
--- a/board/purple/purple.c
+++ b/board/purple/purple.c
@@ -26,6 +26,7 @@
 #include <asm/inca-ip.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 #include <asm/addrspace.h>
 #include <asm/cacheops.h>
 
@@ -145,6 +146,8 @@ int checkboard (void)
 
 	printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }
 
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
index e7ec012c3..50e7f848e 100644
--- a/board/purple/u-boot.lds
+++ b/board/purple/u-boot.lds
@@ -64,10 +64,11 @@ SECTIONS
 
 	.sdata  : { *(.sdata) }
 
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/board/rsdproto/rsdproto.c b/board/rsdproto/rsdproto.c
index bf4fd5305..312d4b860 100644
--- a/board/rsdproto/rsdproto.c
+++ b/board/rsdproto/rsdproto.c
@@ -210,7 +210,7 @@ void read_RS5C372_time (struct tm *timedate)
 
 #define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
 
-	if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
+	if (! i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
 		timedate->tm_sec = BCD_TO_BIN (buffer[0]);
 		timedate->tm_min = BCD_TO_BIN (buffer[1]);
 		timedate->tm_hour = BCD_TO_BIN (buffer[2]);
@@ -231,7 +231,7 @@ int read_LM84_temp (int address)
 	unsigned char buffer[8];
 	/*int rc;*/
 
-	if (i2c_read (address, 0, 1, buffer, 1)) {
+	if (! i2c_read (address, 0, 1, buffer, 1)) {
 		return (int) buffer[0];
 	} else {
 		/*printf("i2c error %02x\n", rc); */
diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds
index 9bd624809..70fc3a5d2 100644
--- a/board/rsdproto/u-boot.lds
+++ b/board/rsdproto/u-boot.lds
@@ -55,6 +55,7 @@ SECTIONS
   {
     cpu/mpc8260/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     /*. = env_offset; */
   }
diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds
index 9e9e99045..36420ad87 100644
--- a/board/sandburst/karef/u-boot.lds
+++ b/board/sandburst/karef/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
index 47d80fae1..b934c8909 100644
--- a/board/sandburst/karef/u-boot.lds.debug
+++ b/board/sandburst/karef/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds
index a17401af9..e2178d23a 100644
--- a/board/sandburst/metrobox/u-boot.lds
+++ b/board/sandburst/metrobox/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
index fef4c4220..914ff9cd7 100644
--- a/board/sandburst/metrobox/u-boot.lds.debug
+++ b/board/sandburst/metrobox/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c
index f2718f256..0c669e4d7 100644
--- a/board/sbc2410x/flash.c
+++ b/board/sbc2410x/flash.c
@@ -288,7 +288,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;
diff --git a/board/sbc405/u-boot.lds b/board/sbc405/u-boot.lds
index 39fba6168..0c5b8096d 100644
--- a/board/sbc405/u-boot.lds
+++ b/board/sbc405/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index e8b9929e7..47df884ce 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -195,8 +195,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 int board_early_init_f (void)
 {
 #if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+    volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
 
     pci->peer &= 0xfffffffdf; /* disable master abort */
 #endif
@@ -264,16 +263,15 @@ long int initdram (int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 #if 0
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
 #endif /* 0 */
 #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur= &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 #endif
 #if defined(CONFIG_DDR_DLL)
 	uint temp_ddrdll = 0;
@@ -336,8 +334,7 @@ long int initdram (int board_type)
 		 * enable errors */
 		uint *p = 0;
 		uint i = 0;
-		volatile immap_t *immap = (immap_t *)CFG_IMMR;
-		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+		volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 		dma_init();
 		for (*p = 0; p < (uint *)(8 * 1024); p++) {
 			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
@@ -424,8 +421,7 @@ long int fixed_sdram (void)
 #define CFG_DDR_CONTROL 0xc2000000
 
   #ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 
 	ddr->cs0_bnds		= 0x00000007;
 	ddr->cs1_bnds		= 0x0010001f;
diff --git a/board/sc3/u-boot.lds b/board/sc3/u-boot.lds
index dc255d283..05052e558 100644
--- a/board/sc3/u-boot.lds
+++ b/board/sc3/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/smdk2410/flash.c b/board/smdk2410/flash.c
index 993946be9..376930bd3 100644
--- a/board/smdk2410/flash.c
+++ b/board/smdk2410/flash.c
@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;
diff --git a/board/stxgp3/stxgp3.c b/board/stxgp3/stxgp3.c
index a58c043b6..3649acf07 100644
--- a/board/stxgp3/stxgp3.c
+++ b/board/stxgp3/stxgp3.c
@@ -203,8 +203,7 @@ int
 board_early_init_f(void)
 {
 #if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+    volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
 
     pci->peer &= 0xfffffffdf; /* disable master abort */
 #endif
@@ -283,11 +282,10 @@ initdram (int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 
 #if defined(CONFIG_DDR_DLL)
 	{
-		volatile ccsr_gur_t *gur= &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 		uint temp_ddrdll = 0;
 
 		/* Work around to stabilize DDR DLL */
diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c
index 9bacb98d8..e2b38a620 100644
--- a/board/stxssa/stxssa.c
+++ b/board/stxssa/stxssa.c
@@ -252,8 +252,7 @@ int
 board_early_init_f(void)
 {
 #if defined(CONFIG_PCI)
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-	volatile ccsr_pcix_t *pci = &immr->im_pcix;
+	volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
 
 	pci->peer &= 0xffffffdf; /* disable master abort */
 #endif
@@ -302,8 +301,7 @@ initdram (int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-		volatile immap_t *immap = (immap_t *)CFG_IMMR;
-		volatile ccsr_gur_t *gur= &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 		uint temp_ddrdll = 0;
 
 		/* Work around to stabilize DDR DLL */
diff --git a/board/tb0229/tb0229.c b/board/tb0229/tb0229.c
index e7914bd15..61c2e9bd3 100644
--- a/board/tb0229/tb0229.c
+++ b/board/tb0229/tb0229.c
@@ -13,10 +13,9 @@
 #include <command.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
+#include <asm/io.h>
 #include <pci.h>
 
-unsigned long mips_io_port_base = 0;
-
 #if defined(CONFIG_PCI)
 static struct pci_controller hose;
 
@@ -26,17 +25,17 @@ void pci_init_board (void)
 }
 #endif
 
-
 long int initdram(int board_type)
 {
 	return get_ram_size (CFG_SDRAM_BASE, 0x8000000);
 }
 
-
 int checkboard (void)
 {
 	printf("Board: TANBAC TB0229 ");
 	printf("(CPU Speed %d MHz)\n", (int)CPU_CLOCK_RATE/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }
diff --git a/board/tb0229/u-boot.lds b/board/tb0229/u-boot.lds
index b2fa9f22d..c629040a0 100644
--- a/board/tb0229/u-boot.lds
+++ b/board/tb0229/u-boot.lds
@@ -54,10 +54,11 @@ SECTIONS
 
 	.sdata  : { *(.sdata) }
 
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index da4e2281a..f33d17258 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -444,6 +444,8 @@ ulong post_word_load (void)
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {
+	extern int usb_cpu_init(void);
+
 #ifdef CONFIG_PS2MULT
 	ps2mult_early_init();
 #endif /* CONFIG_PS2MULT */
@@ -591,9 +593,9 @@ int last_stage_init (void)
 		disable_ctrlc(1);
 	}
 #endif
+#endif /* !CONFIG_TQM5200S */
 
 	return 0;
-#endif /* !CONFIG_TQM5200S */
 }
 
 #ifdef CONFIG_VIDEO_SM501
diff --git a/board/tqm85xx/sdram.c b/board/tqm85xx/sdram.c
index 9c1f08768..2053adefb 100644
--- a/board/tqm85xx/sdram.c
+++ b/board/tqm85xx/sdram.c
@@ -57,8 +57,7 @@ int cas_latency(void);
 long int sdram_setup(int casl)
 {
 	int i;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ccsr_ddr_t *ddr = &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
 	unsigned long cfg_ddr_timing1;
 	unsigned long cfg_ddr_mode;
 
@@ -150,8 +149,7 @@ long int initdram (int board_type)
 	 * This DLL-Override only used on TQM8540 and TQM8560
 	 */
 	{
-		volatile immap_t *immap = (immap_t *) CFG_IMMR;
-		volatile ccsr_gur_t *gur= &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 		int i,x;
 
 		x = 10;
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index 256c076c7..5d5cb1b75 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -262,8 +262,7 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
-	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
+	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	/*
 	 * Adjust flash start and offset to detected values
@@ -324,9 +323,8 @@ int misc_init_r (void)
  */
 void local_bus_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index db0a7e5eb..4342ebc84 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -33,6 +33,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if !defined(CFG_FLASH_CFI_DRIVER) /* do not use if CFI driver is configured */
+
 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
     && !defined(CONFIG_TQM885D)
 # ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
@@ -828,3 +830,5 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 
 /*-----------------------------------------------------------------------
  */
+
+#endif /* !defined(CFG_FLASH_CFI_DRIVER) */
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index cebdcc076..fcd941e0d 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -37,6 +37,7 @@ static long int dram_size (long int, long int *, long int);
 
 #define	_NOT_USED_	0xFFFFFFFF
 
+/* UPM initialization table for SDRAM: 40, 50, 66 MHz CLKOUT @ CAS latency 2, tWR=2 */
 const uint sdram_table[] =
 {
 	/*
@@ -63,14 +64,14 @@ const uint sdram_table[] =
 	/*
 	 * Single Write. (Offset 18 in UPMA RAM)
 	 */
-	0x1F0DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	0x1F0DFC04, 0xEEABBC00, 0x11B77C04, 0xEFFAFC44,
+	0x1FF5FC47, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
 	 * Burst Write. (Offset 20 in UPMA RAM)
 	 */
 	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */
-					    _NOT_USED_,
+	0xF0AFFC00, 0xF0AFFC04, 0xE1BAFC44, 0x1FF5FC47, /* last */
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
@@ -83,7 +84,7 @@ const uint sdram_table[] =
 	/*
 	 * Exception. (Offset 3c in UPMA RAM)
 	 */
-	0x7FFFFC07, /* last */
+	0xFFFFFC07, /* last */
 		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
 };
 
@@ -183,7 +184,7 @@ long int initdram (int board_type)
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
 	    (board_type != 'M') &&
-	    (board_type != 'D') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'D') ) {	/* only one SDRAM bank on L, M and D modules */
 		memctl->memc_or3 = CFG_OR3_PRELIM;
 		memctl->memc_br3 = CFG_BR3_PRELIM;
 	}
@@ -259,7 +260,7 @@ long int initdram (int board_type)
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
 	    (board_type != 'M') &&
-	    (board_type != 'D') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'D') ) {	/* only one SDRAM bank on L, M and D modules */
 		/*
 		 * Check Bank 1 Memory Size
 		 * use current column settings
diff --git a/board/versatile/split_by_variant.sh b/board/versatile/split_by_variant.sh
index 25461c2c0..ccded7e8c 100755
--- a/board/versatile/split_by_variant.sh
+++ b/board/versatile/split_by_variant.sh
@@ -8,7 +8,7 @@
 
 mkdir -p ${obj}include
 variant=PB926EJ-S
-if [ "$1" == "" ]
+if [ "$1" = "" ]
 then
 	echo "$0:: No parameters - using versatilepb_config"
 	echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c
index 0ad1b666b..d8ea6e573 100644
--- a/board/voiceblue/eeprom.c
+++ b/board/voiceblue/eeprom.c
@@ -26,7 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
 
diff --git a/board/wepep250/flash.c b/board/wepep250/flash.c
index 2a322903d..e2e08f742 100644
--- a/board/wepep250/flash.c
+++ b/board/wepep250/flash.c
@@ -44,6 +44,7 @@
 
 #if ( WEP_FLASH_BUS_WIDTH == 1 )
 #  define FLASH_BUS vu_char
+#  define FLASH_BUS_RET u_char
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  else
@@ -53,6 +54,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 2 )
 #  define FLASH_BUS vu_short
+#  define FLASH_BUS_RET u_short
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -64,6 +66,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 4 )
 #  define FLASH_BUS vu_long
+#  define FLASH_BUS_RET u_long
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -81,7 +84,7 @@
 
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
-static FLASH_BUS flash_status_reg (void)
+static FLASH_BUS_RET flash_status_reg (void)
 {
 
 	FLASH_BUS *addr = (FLASH_BUS *) 0;
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
index 60f0bc24e..58bfac071 100644
--- a/board/xilinx/ml300/ml300.c
+++ b/board/xilinx/ml300/ml300.c
@@ -108,7 +108,7 @@ ulong
 get_PCI_freq(void)
 {
 	ulong val;
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	get_sys_info(&sys_info);
 	val = sys_info.freqPCI;
diff --git a/board/xilinx/ml300/u-boot.lds b/board/xilinx/ml300/u-boot.lds
index b6d748e1d..8c0edb7e4 100644
--- a/board/xilinx/ml300/u-boot.lds
+++ b/board/xilinx/ml300/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)
diff --git a/board/xpedite1k/u-boot.lds b/board/xpedite1k/u-boot.lds
index 0f0863710..748411114 100644
--- a/board/xpedite1k/u-boot.lds
+++ b/board/xpedite1k/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/board/xpedite1k/u-boot.lds.debug b/board/xpedite1k/u-boot.lds.debug
index 506632692..66317933b 100644
--- a/board/xpedite1k/u-boot.lds.debug
+++ b/board/xpedite1k/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
diff --git a/common/Makefile b/common/Makefile
index fde5ad903..7be89a41c 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -27,32 +27,112 @@ LIB	= $(obj)libcommon.a
 
 AOBJS	=
 
-COBJS	= main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \
-	  cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \
-	  cmd_cache.o cmd_console.o \
-	  cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \
-	  cmd_eeprom.o cmd_elf.o cmd_ext2.o \
-	  cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \
-	  cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \
-	  cmd_load.o cmd_log.o \
-	  cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
-	  cmd_nand.o cmd_net.o cmd_nvedit.o \
-	  cmd_onenand.o \
-	  cmd_pci.o cmd_pcmcia.o cmd_portio.o \
-	  cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \
-	  cmd_universe.o cmd_usb.o cmd_vfd.o \
-	  command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
-	  environment.o env_common.o \
-	  env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
-	  env_onenand.o env_nvram.o env_nowhere.o \
-	  exports.o \
-	  fdt_support.o flash.o fpga.o ft_build.o \
-	  hush.o kgdb.o lcd.o lists.o lynxkdi.o \
-	  memsize.o miiphybb.o miiphyutil.o \
-	  s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
-	  usb.o usb_kbd.o usb_storage.o \
-	  virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o
+COBJS-y += main.o
+COBJS-y += ACEX1K.o
+COBJS-y += altera.o
+COBJS-y += bedbug.o
+COBJS-y += circbuf.o
+COBJS-y += cmd_autoscript.o
+COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
+COBJS-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o
+COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
+COBJS-y += cmd_boot.o
+COBJS-y += cmd_bootm.o
+COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o
+COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
+COBJS-$(CONFIG_CMD_DATE) += cmd_date.o
+ifdef CONFIG_4xx
+COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
+endif
+ifdef CONFIG_POST
+COBJS-$(CONFIG_CMD_DIAG) += cmd_diag.o
+endif
+COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o
+COBJS-$(CONFIG_CMD_DOC) += cmd_doc.o
+COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o
+COBJS-y += cmd_eeprom.o
+COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
+COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
+COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
+COBJS-y += cmd_fdc.o
+COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
+COBJS-$(CONFIG_CMD_FDOS) += cmd_fdos.o
+COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o
+ifdef CONFIG_FPGA
+COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
+endif
+COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
+COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
+COBJS-$(CONFIG_CMD_IMMAP) += cmd_immap.o
+COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
+COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
+COBJS-y += cmd_load.o
+COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
+COBJS-y += cmd_mem.o
+COBJS-$(CONFIG_CMD_MII) += cmd_mii.o
+COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
+COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
+COBJS-y += cmd_nand.o
+COBJS-$(CONFIG_CMD_NET) += cmd_net.o
+COBJS-y += cmd_nvedit.o
+COBJS-y += cmd_onenand.o
+ifdef CONFIG_PCI
+COBJS-$(CONFIG_CMD_PCI) += cmd_pci.o
+endif
+COBJS-y += cmd_pcmcia.o
+COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o
+COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
+COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
+COBJS-y += cmd_sata.o
+COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
+COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
+COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
+COBJS-$(CONFIG_CMD_USB) += cmd_usb.o
+COBJS-y += cmd_vfd.o
+COBJS-y += command.o
+COBJS-y += console.o
+COBJS-y += cyclon2.o
+COBJS-y += devices.o
+COBJS-y += dlmalloc.o
+COBJS-y += docecc.o
+COBJS-y += environment.o
+COBJS-y += env_common.o
+COBJS-y += env_nand.o
+COBJS-y += env_dataflash.o
+COBJS-y += env_flash.o
+COBJS-y += env_eeprom.o
+COBJS-y += env_onenand.o
+COBJS-y += env_nvram.o
+COBJS-y += env_nowhere.o
+COBJS-y += exports.o
+COBJS-y += flash.o
+COBJS-y += fpga.o
+COBJS-y += ft_build.o
+COBJS-y += hush.o
+COBJS-y += kgdb.o
+COBJS-y += lcd.o
+COBJS-y += lists.o
+COBJS-y += lynxkdi.o
+COBJS-y += memsize.o
+COBJS-y += miiphybb.o
+COBJS-y += miiphyutil.o
+COBJS-y += s_record.o
+COBJS-y += serial.o
+COBJS-y += soft_i2c.o
+COBJS-y += soft_spi.o
+COBJS-y += spartan2.o
+COBJS-y += spartan3.o
+COBJS-y += usb.o
+COBJS-y += usb_kbd.o
+COBJS-y += usb_storage.o
+COBJS-y += virtex2.o
+COBJS-y += xilinx.o
+COBJS-y += crc16.o
+COBJS-y += xyzModem.o
+COBJS-y += cmd_mac.o
+COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index ef15a006c..d05998366 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -30,7 +30,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_BDI)
 static void print_num(const char *, ulong);
 
 #ifndef CONFIG_ARM	/* PowerPC and other */
@@ -350,4 +349,3 @@ U_BOOT_CMD(
 	"bdinfo  - print Board Info structure\n",
 	NULL
 );
-#endif
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
index 1c3547a1f..94f7e0847 100644
--- a/common/cmd_bedbug.c
+++ b/common/cmd_bedbug.c
@@ -13,8 +13,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_BEDBUG)
-
 #ifndef MAX
 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 #endif
@@ -413,7 +411,6 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
 	    "rdump   - Show registers.\n", " - Show registers.\n");
 /* ====================================================================== */
-#endif
 
 
 /*
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index 241aa8357..907f9a2db 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -31,8 +31,6 @@
 #include <asm/byteorder.h>
 #include <malloc.h>
 
-#if defined(CONFIG_CMD_BMP)
-
 static int bmp_info (ulong addr);
 static int bmp_display (ulong addr, int x, int y);
 
@@ -187,5 +185,3 @@ static int bmp_display(ulong addr, int x, int y)
 # error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
 #endif
 }
-
-#endif /* defined(CONFIG_CMD_BMP) */
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index d8163494e..954672929 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -260,6 +260,8 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (hdr->ih_arch != IH_CPU_NIOS2)
 #elif defined(__PPC__)
 	if (hdr->ih_arch != IH_CPU_PPC)
+#elif defined(__sh__)
+	if (hdr->ih_arch != IH_CPU_SH)
 #else
 # error Unknown CPU type
 #endif
diff --git a/common/cmd_console.c b/common/cmd_console.c
index 5e0f99072..50ddb011c 100644
--- a/common/cmd_console.c
+++ b/common/cmd_console.c
@@ -28,8 +28,6 @@
 #include <command.h>
 #include <devices.h>
 
-#if defined(CONFIG_CMD_CONSOLE)
-
 extern void _do_coninfo (void);
 int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char *argv[])
 {
@@ -67,5 +65,3 @@ U_BOOT_CMD(
 	"coninfo - print console devices and information\n",
 	""
 );
-
-#endif
diff --git a/common/cmd_date.c b/common/cmd_date.c
index 4a4253490..751159847 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -31,8 +31,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_DATE)
-
 const char *weekdays[] = {
 	"Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur",
 };
@@ -210,5 +208,3 @@ U_BOOT_CMD(
 	"  - with numeric argument: set the system date & time\n"
 	"  - with 'reset' argument: reset the RTC\n"
 );
-
-#endif
diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c
index 12fa9db08..a053343ab 100644
--- a/common/cmd_dcr.c
+++ b/common/cmd_dcr.c
@@ -29,8 +29,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
-
 unsigned long get_dcr (unsigned short);
 unsigned long set_dcr (unsigned short, unsigned long);
 
@@ -245,5 +243,3 @@ U_BOOT_CMD(
 	"setidcr - Set a register value via indirect DCR addressing\n",
 	"adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
 );
-
-#endif
diff --git a/common/cmd_diag.c b/common/cmd_diag.c
index cb99b7700..82d5ad313 100644
--- a/common/cmd_diag.c
+++ b/common/cmd_diag.c
@@ -28,8 +28,6 @@
 #include <command.h>
 #include <post.h>
 
-#if defined(CONFIG_CMD_DIAG) && defined(CONFIG_POST)
-
 int do_diag (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned int i;
@@ -76,5 +74,3 @@ U_BOOT_CMD(
 	"diag run [test1 [test2]]\n"
 	"         - run specified tests\n"
 );
-
-#endif
diff --git a/common/cmd_display.c b/common/cmd_display.c
index d19f41281..a29345c6b 100644
--- a/common/cmd_display.c
+++ b/common/cmd_display.c
@@ -24,8 +24,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_DISPLAY)
-
 #undef DEBUG_DISP
 
 #define DISP_SIZE	8
@@ -78,5 +76,3 @@ U_BOOT_CMD(
 	"    - with <string> argument: display <string> on dot matrix display\n"
 	"    - without arguments: clear dot matrix display\n"
 );
-
-#endif
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index d6d3aff8c..3d717c039 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -11,9 +11,6 @@
 #include <command.h>
 #include <malloc.h>
 #include <asm/io.h>
-
-#if defined(CONFIG_CMD_DOC)
-
 #include <linux/mtd/nftl.h>
 #include <linux/mtd/doc2000.h>
 
@@ -1607,5 +1604,3 @@ void doc_probe(unsigned long physadr)
 		puts ("No DiskOnChip found\n");
 	}
 }
-
-#endif
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index 804d467f2..956dc69da 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -25,8 +25,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_DTT)
-
 #include <dtt.h>
 #include <i2c.h>
 
@@ -60,5 +58,3 @@ U_BOOT_CMD(
 	  "dtt     - Digital Thermometer and Thermostat\n",
 	  "        - Read temperature from digital thermometer and thermostat.\n"
 );
-
-#endif
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 63a5593e4..2eb745315 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -23,8 +23,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-#if defined(CONFIG_CMD_ELF)
-
 #ifndef MAX
 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 #endif
@@ -323,5 +321,3 @@ U_BOOT_CMD(
 	"bootvx  - Boot vxWorks from an ELF image\n",
 	" [address] - load address of vxWorks ELF image.\n"
 );
-
-#endif
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index 8bd2b476e..f56940643 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -34,8 +34,6 @@
  */
 #include <common.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_EXT2)
 #include <config.h>
 #include <command.h>
 #include <image.h>
@@ -259,5 +257,3 @@ U_BOOT_CMD(
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
 	"      to address 'addr' from ext2 filesystem\n"
 );
-
-#endif
diff --git a/common/cmd_fat.c b/common/cmd_fat.c
index 54f0f9f9c..9576cdf38 100644
--- a/common/cmd_fat.c
+++ b/common/cmd_fat.c
@@ -30,11 +30,6 @@
 #include <net.h>
 #include <ata.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_FAT)
-
-#undef	DEBUG
-
 #include <fat.h>
 
 
@@ -323,5 +318,3 @@ void hexdump (int cnt, unsigned char *data)
 	}
 }
 #endif	/* NOT_IMPLEMENTED_YET */
-
-#endif
diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c
index f9da98ddc..b3dbd19fa 100644
--- a/common/cmd_fdos.c
+++ b/common/cmd_fdos.c
@@ -31,8 +31,6 @@
 #include <command.h>
 #include <fdc.h>
 
-#if defined(CONFIG_CMD_FDOS)
-
 /*-----------------------------------------------------------------------------
  * do_fdosboot --
  *-----------------------------------------------------------------------------
@@ -153,5 +151,3 @@ U_BOOT_CMD(
 	"fdosls  - list files in a directory\n",
 	"[directory]\n"
 );
-
-#endif
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 571b8f14d..463912653 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -28,9 +28,6 @@
 #include <command.h>
 #include <linux/ctype.h>
 #include <linux/types.h>
-
-#ifdef CONFIG_OF_LIBFDT
-
 #include <asm/global_data.h>
 #include <fdt.h>
 #include <libfdt.h>
@@ -47,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR;
 static int fdt_valid(void);
 static int fdt_parse_prop(char *pathp, char *prop, char *newval,
 	char *data, int *len);
-static int fdt_print(char *pathp, char *prop, int depth);
+static int fdt_print(const char *pathp, char *prop, int depth);
 
 /*
  * Flattened Device Tree command, see the help for parameter definitions.
@@ -78,7 +75,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			/*
 			 * Optional new length
 			 */
-			len =  simple_strtoul(argv[3], NULL, 16);
+			len = simple_strtoul(argv[3], NULL, 16);
 			if (len < fdt_totalsize(fdt)) {
 				printf ("New length %d < existing length %d, "
 					"ignoring.\n",
@@ -165,12 +162,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		pathp = argv[2];
 		nodep = argv[3];
 
-		nodeoffset = fdt_find_node_by_path (fdt, pathp);
+		nodeoffset = fdt_path_offset (fdt, pathp);
 		if (nodeoffset < 0) {
 			/*
 			 * Not found or something else bad happened.
 			 */
-			printf ("libfdt fdt_find_node_by_path() returned %s\n",
+			printf ("libfdt fdt_path_offset() returned %s\n",
 				fdt_strerror(nodeoffset));
 			return 1;
 		}
@@ -205,12 +202,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		prop   = argv[3];
 		newval = argv[4];
 
-		nodeoffset = fdt_find_node_by_path (fdt, pathp);
+		nodeoffset = fdt_path_offset (fdt, pathp);
 		if (nodeoffset < 0) {
 			/*
 			 * Not found or something else bad happened.
 			 */
-			printf ("libfdt fdt_find_node_by_path() returned %s\n",
+			printf ("libfdt fdt_path_offset() returned %s\n",
 				fdt_strerror(nodeoffset));
 			return 1;
 		}
@@ -232,6 +229,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		char *pathp;		/* path */
 		char *prop;		/* property */
 		int  ret;		/* return value */
+		static char root[2] = "/";
 
 		/*
 		 * list is an alias for print, but limited to 1 level
@@ -244,7 +242,10 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		 * Get the starting path.  The root node is an oddball,
 		 * the offset is zero and has no name.
 		 */
-		pathp = argv[2];
+		if (argc == 2)
+			pathp = root;
+		else
+			pathp = argv[2];
 		if (argc > 3)
 			prop = argv[3];
 		else
@@ -265,12 +266,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		 * Get the path.  The root node is an oddball, the offset
 		 * is zero and has no name.
 		 */
-		nodeoffset = fdt_find_node_by_path (fdt, argv[2]);
+		nodeoffset = fdt_path_offset (fdt, argv[2]);
 		if (nodeoffset < 0) {
 			/*
 			 * Not found or something else bad happened.
 			 */
-			printf ("libfdt fdt_find_node_by_path() returned %s\n",
+			printf ("libfdt fdt_path_offset() returned %s\n",
 				fdt_strerror(nodeoffset));
 			return 1;
 		}
@@ -521,21 +522,21 @@ static void print_data(const void *data, int len)
 
 	switch (len) {
 	case 1:	 /* byte */
-		printf("<%02x>", (*(u8 *) data) & 0xff);
+		printf("<0x%02x>", (*(u8 *) data) & 0xff);
 		break;
 	case 2:	 /* half-word */
-		printf("<%04x>", be16_to_cpu(*(u16 *) data) & 0xffff);
+		printf("<0x%04x>", be16_to_cpu(*(u16 *) data) & 0xffff);
 		break;
 	case 4:	 /* word */
-		printf("<%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
+		printf("<0x%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
 		break;
 	case 8:	 /* double-word */
 #if __WORDSIZE == 64
-		printf("<%016llx>", be64_to_cpu(*(uint64_t *) data));
+		printf("<0x%016llx>", be64_to_cpu(*(uint64_t *) data));
 #else
-		printf("<%08x ", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
+		printf("<0x%08x ", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
 		data += 4;
-		printf("%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
+		printf("0x%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
 #endif
 		break;
 	default:		/* anything else... hexdump */
@@ -554,25 +555,25 @@ static void print_data(const void *data, int len)
  * Recursively print (a portion of) the fdt.  The depth parameter
  * determines how deeply nested the fdt is printed.
  */
-static int fdt_print(char *pathp, char *prop, int depth)
+static int fdt_print(const char *pathp, char *prop, int depth)
 {
-	static int offstack[MAX_LEVEL];
 	static char tabs[MAX_LEVEL+1] =
 		"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t"
 		"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t";
-	void *nodep;		/* property node pointer */
+	const void *nodep;	/* property node pointer */
 	int  nodeoffset;	/* node offset from libfdt */
 	int  nextoffset;	/* next node offset from libfdt */
 	uint32_t tag;		/* tag */
 	int  len;		/* length of the property */
 	int  level = 0;		/* keep track of nesting level */
+	const struct fdt_property *fdt_prop;
 
-	nodeoffset = fdt_find_node_by_path (fdt, pathp);
+	nodeoffset = fdt_path_offset (fdt, pathp);
 	if (nodeoffset < 0) {
 		/*
 		 * Not found or something else bad happened.
 		 */
-		printf ("libfdt fdt_find_node_by_path() returned %s\n",
+		printf ("libfdt fdt_path_offset() returned %s\n",
 			fdt_strerror(nodeoffset));
 		return 1;
 	}
@@ -587,7 +588,7 @@ static int fdt_print(char *pathp, char *prop, int depth)
 			printf("%s %s\n", pathp, prop);
 			return 0;
 		} else if (len > 0) {
-			printf("%s=", prop);
+			printf("%s = ", prop);
 			print_data (nodep, len);
 			printf("\n");
 			return 0;
@@ -602,46 +603,53 @@ static int fdt_print(char *pathp, char *prop, int depth)
 	 * The user passed in a node path and no property,
 	 * print the node and all subnodes.
 	 */
-	offstack[0] = nodeoffset;
-
 	while(level >= 0) {
-		tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, &pathp);
+		tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
 		switch(tag) {
 		case FDT_BEGIN_NODE:
-			if(level <= depth)
+			pathp = fdt_get_name(fdt, nodeoffset, NULL);
+			if (level <= depth) {
+				if (pathp == NULL)
+					pathp = "/* NULL pointer error */";
+				if (*pathp == '\0')
+					pathp = "/";	/* root is nameless */
 				printf("%s%s {\n",
 					&tabs[MAX_LEVEL - level], pathp);
+			}
 			level++;
-			offstack[level] = nodeoffset;
 			if (level >= MAX_LEVEL) {
-				printf("Aaaiii <splat> nested too deep. "
-					"Aborting.\n");
+				printf("Nested too deep, aborting.\n");
 				return 1;
 			}
 			break;
 		case FDT_END_NODE:
 			level--;
-			if(level <= depth)
+			if (level <= depth)
 				printf("%s};\n", &tabs[MAX_LEVEL - level]);
 			if (level == 0) {
 				level = -1;		/* exit the loop */
 			}
 			break;
 		case FDT_PROP:
-			nodep = fdt_getprop (fdt, offstack[level], pathp, &len);
+			fdt_prop = fdt_offset_ptr(fdt, nodeoffset,
+					sizeof(*fdt_prop));
+			pathp    = fdt_string(fdt,
+					fdt32_to_cpu(fdt_prop->nameoff));
+			len      = fdt32_to_cpu(fdt_prop->len);
+			nodep    = fdt_prop->data;
 			if (len < 0) {
 				printf ("libfdt fdt_getprop(): %s\n",
 					fdt_strerror(len));
 				return 1;
 			} else if (len == 0) {
 				/* the property has no value */
-				if(level <= depth)
+				if (level <= depth)
 					printf("%s%s;\n",
 						&tabs[MAX_LEVEL - level],
 						pathp);
 			} else {
-				if(level <= depth) {
-					printf("%s%s=",
+				if (level <= depth) {
+					printf("%s%s = ",
 						&tabs[MAX_LEVEL - level],
 						pathp);
 					print_data (nodep, len);
@@ -650,11 +658,12 @@ static int fdt_print(char *pathp, char *prop, int depth)
 			}
 			break;
 		case FDT_NOP:
+			printf("/* NOP */\n", &tabs[MAX_LEVEL - level]);
 			break;
 		case FDT_END:
 			return 1;
 		default:
-			if(level <= depth)
+			if (level <= depth)
 				printf("Unknown tag 0x%08X\n", tag);
 			return 1;
 		}
@@ -692,5 +701,3 @@ U_BOOT_CMD(
 	"          fdt print /cpus \"#address-cells\"\n"
 	"          fdt set   /cpus \"#address-cells\" \"[00 00 00 01]\"\n"
 );
-
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 11c885731..f56443e25 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -31,8 +31,6 @@
 #include <dataflash.h>
 #endif
 
-#if defined(CONFIG_CMD_FLASH)
-
 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 #include <jffs2/jffs2.h>
 
@@ -731,5 +729,3 @@ U_BOOT_CMD(
 #undef	TMP_ERASE
 #undef	TMP_PROT_ON
 #undef	TMP_PROT_OFF
-
-#endif
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index cce23ad70..377a692f7 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -43,8 +43,6 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#if defined (CONFIG_FPGA) && defined(CONFIG_CMD_FPGA)
-
 /* Local functions */
 static void fpga_usage (cmd_tbl_t * cmdtp);
 static int fpga_get_op (char *opstr);
@@ -321,4 +319,3 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
 	    "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
 	    "\tloadmk\tLoad device generated with mkimage\n"
 	    "\tdump\tLoad device to memory buffer\n");
-#endif
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index a684a580e..10cab4609 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -86,9 +86,6 @@
 #include <i2c.h>
 #include <asm/byteorder.h>
 
-#if defined(CONFIG_CMD_I2C)
-
-
 /* Display values from last command.
  * Memory modify remembered values are different from display memory.
  */
@@ -1024,5 +1021,3 @@ U_BOOT_CMD(
 	"      (valid chip values 50..57)\n"
 );
 #endif
-
-#endif
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index bb064eaa0..c38be4f1a 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -54,10 +54,6 @@
 
 #ifndef __PPC__
 #include <asm/io.h>
-#ifdef __MIPS__
-/* Macros depend on this variable */
-unsigned long mips_io_port_base = 0;
-#endif
 #endif
 
 #ifdef CONFIG_IDE_8xx_DIRECT
@@ -72,8 +68,6 @@ DECLARE_GLOBAL_DATA_PTR;
 # define SYNC		/* nothing */
 #endif
 
-#if defined(CONFIG_CMD_IDE)
-
 #ifdef CONFIG_IDE_8xx_DIRECT
 /* Timings for IDE Interface
  *
@@ -892,7 +886,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
 #endif	/* __LITTLE_ENDIAN || CONFIG_AU1X00 */
 
 
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
+#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) || defined(CONFIG_SH)
 static void
 output_data(int dev, ulong *sect_buf, int words)
 {
@@ -944,7 +938,7 @@ output_data(int dev, ulong *sect_buf, int words)
 }
 #endif	/* __PPC__ */
 
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
+#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) || defined(CONFIG_SH)
 static void
 input_data(int dev, ulong *sect_buf, int words)
 {
@@ -1136,9 +1130,9 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 
 	input_swap_data (device, iobuf, ATA_SECTORWORDS);
 
-	ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
-	ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
-	ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
+	ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
+	ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
+	ident_cpy ((unsigned char*)dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
 #ifdef __LITTLE_ENDIAN
 	/*
 	 * firmware revision and model number have Big Endian Byte
@@ -1953,9 +1947,9 @@ static void	atapi_inquiry(block_dev_desc_t * dev_desc)
 		return;
 
 	/* copy device ident strings */
-	ident_cpy(dev_desc->vendor,&iobuf[8],8);
-	ident_cpy(dev_desc->product,&iobuf[16],16);
-	ident_cpy(dev_desc->revision,&iobuf[32],5);
+	ident_cpy((unsigned char*)dev_desc->vendor,&iobuf[8],8);
+	ident_cpy((unsigned char*)dev_desc->product,&iobuf[16],16);
+	ident_cpy((unsigned char*)dev_desc->revision,&iobuf[32],5);
 
 	dev_desc->lun=0;
 	dev_desc->lba=0;
@@ -2085,5 +2079,3 @@ U_BOOT_CMD(
 	"diskboot- boot from IDE device\n",
 	"loadAddr dev:part\n"
 );
-
-#endif
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index ae9575824..d75826977 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -28,8 +28,7 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_IMMAP) && \
-    (defined(CONFIG_8xx) || defined(CONFIG_8260))
+#if defined(CONFIG_8xx) || defined(CONFIG_8260)
 
 #if defined(CONFIG_8xx)
 #include <asm/8xx_immap.h>
@@ -41,9 +40,7 @@
 #include <asm/iopin_8260.h>
 #endif
 
-#if defined(CONFIG_8xx) || defined(CONFIG_8260)
 DECLARE_GLOBAL_DATA_PTR;
-#endif
 
 static void
 unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
index 8e2051714..ce988723c 100644
--- a/common/cmd_itest.c
+++ b/common/cmd_itest.c
@@ -32,8 +32,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_ITEST)
-
 #define EQ	0
 #define NE	1
 #define LT	2
@@ -197,4 +195,3 @@ U_BOOT_CMD(
 	"itest\t- return true/false on integer compare\n",
 	"[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
 );
-#endif
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 513a226c4..efe9eb7be 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -93,9 +93,6 @@
 #include <jffs2/jffs2.h>
 #include <linux/list.h>
 #include <linux/ctype.h>
-
-#if defined(CONFIG_CMD_JFFS2)
-
 #include <cramfs/cramfs_fs.h>
 
 #if defined(CONFIG_CMD_NAND)
@@ -2191,5 +2188,3 @@ U_BOOT_CMD(
 #endif /* #ifdef CONFIG_JFFS2_CMDLINE */
 
 /***************************************************/
-
-#endif
diff --git a/common/cmd_log.c b/common/cmd_log.c
index fba8bd8bf..e593dbedd 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -48,8 +48,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_LOGBUFFER)
-
 /* Local prototypes */
 static void logbuff_putc (const char c);
 static void logbuff_puts (const char *s);
@@ -287,5 +285,3 @@ static int logbuff_printk(const char *line)
 	}
 	return i;
 }
-
-#endif /* (CONFIG_LOGBUFFER) */
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 9d1d87551..5982b76e6 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -29,8 +29,6 @@
 #include <common.h>
 #include <config.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MFSL)
 #include <asm/asm.h>
 
 int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
@@ -413,5 +411,3 @@ U_BOOT_CMD (rspr, 3, 1, do_rspr,
 		" 1 - MSR - Machine status register\n"
 		" 3 - EAR - Exception address register\n"
 		" 5 - ESR - Exception status register\n");
-
-#endif
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 72e11d544..f530a3842 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -27,8 +27,6 @@
 
 #include <common.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MII)
 #include <miiphy.h>
 
 #ifdef CONFIG_TERSE_MII
@@ -112,9 +110,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}
@@ -496,9 +496,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}
@@ -594,5 +596,3 @@ U_BOOT_CMD(
 );
 
 #endif /* CONFIG_TERSE_MII */
-
-#endif
diff --git a/common/cmd_misc.c b/common/cmd_misc.c
index c0c6b8f05..126b538ce 100644
--- a/common/cmd_misc.c
+++ b/common/cmd_misc.c
@@ -27,8 +27,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_MISC)
-
 int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong start = get_timer(0);
@@ -68,5 +66,3 @@ U_BOOT_CMD(
 	"N\n"
 	"    - delay execution for N seconds (N is _decimal_ !!!)\n"
 );
-
-#endif
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 069c6d02a..25c970257 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -23,9 +23,6 @@
 
 #include <common.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MMC)
-
 #include <mmc.h>
 
 int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -42,5 +39,3 @@ U_BOOT_CMD(
 	"mmcinit - init mmc card\n",
 	NULL
 );
-
-#endif
diff --git a/common/cmd_net.c b/common/cmd_net.c
index 0715fbc20..21682c09e 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -28,8 +28,6 @@
 #include <command.h>
 #include <net.h>
 
-#if defined(CONFIG_CMD_NET)
-
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 
 static int netboot_common (proto_t, cmd_tbl_t *, int , char *[]);
@@ -343,5 +341,3 @@ U_BOOT_CMD(
 	"[NTP server IP]\n"
 );
 #endif
-
-#endif
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index 8be6da93f..82d97178f 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -30,16 +30,11 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_PCI
-
 #include <command.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_PCI)
-
 extern int cmd_get_data_size(char* arg, int default_size);
 
 unsigned char	ShortPCIListing = 1;
@@ -564,7 +559,3 @@ U_BOOT_CMD(
 	"pci write[.b, .w, .l] b.d.f address value\n"
 	"    - write to CFG address\n"
 );
-
-#endif
-
-#endif /* CONFIG_PCI */
diff --git a/common/cmd_portio.c b/common/cmd_portio.c
index bfe33e3a8..a06cac016 100644
--- a/common/cmd_portio.c
+++ b/common/cmd_portio.c
@@ -30,8 +30,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_PORTIO)
-
 extern int cmd_get_data_size (char *arg, int default_size);
 
 /* Display values from last command.
@@ -165,5 +163,3 @@ U_BOOT_CMD(
 	"[.b, .w, .l] port\n"
 	"    - read datum from IO port\n"
 );
-
-#endif
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 17e9cd907..bb6aa30d1 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -33,8 +33,6 @@
 #include <mpc5xxx.h>
 #endif
 
-#if defined(CONFIG_CMD_REGINFO)
-
 int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 #if defined(CONFIG_8xx)
@@ -335,9 +333,6 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-#endif
-
-
  /**************************************************/
 
 #if ( defined(CONFIG_8xx)   || defined(CONFIG_405GP) || \
diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
index 1ba392990..b7395d795 100644
--- a/common/cmd_reiser.c
+++ b/common/cmd_reiser.c
@@ -27,8 +27,6 @@
  * Reiserfs support
  */
 #include <common.h>
-
-#if defined(CONFIG_CMD_REISER)
 #include <config.h>
 #include <command.h>
 #include <image.h>
@@ -239,5 +237,3 @@ U_BOOT_CMD(
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
 	"      to address 'addr' from dos filesystem\n"
 );
-
-#endif
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index f56393107..1cdec159f 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -34,8 +34,6 @@
 #include <image.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_SCSI)
-
 #ifdef CONFIG_SCSI_SYM53C8XX
 #define SCSI_VEND_ID	0x1000
 #ifndef CONFIG_SCSI_DEV_ID
@@ -129,9 +127,12 @@ void scsi_scan(int mode)
 			if((modi&0x80)==0x80) /* drive is removable */
 				scsi_dev_desc[scsi_max_devs].removable=TRUE;
 			/* get info for this device */
-			scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].vendor[0],&tempbuff[8],8);
-			scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].product[0],&tempbuff[16],16);
-			scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].revision[0],&tempbuff[32],4);
+			scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0],
+				       &tempbuff[8], 8);
+			scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0],
+				       &tempbuff[16], 16);
+			scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0],
+				       &tempbuff[32], 4);
 			scsi_dev_desc[scsi_max_devs].target=pccb->target;
 			scsi_dev_desc[scsi_max_devs].lun=pccb->lun;
 
@@ -608,5 +609,3 @@ U_BOOT_CMD(
 	"scsiboot- boot from SCSI device\n",
 	"loadAddr dev:part\n"
 );
-
-#endif
diff --git a/common/cmd_spi.c b/common/cmd_spi.c
index 3118d279b..760442214 100644
--- a/common/cmd_spi.c
+++ b/common/cmd_spi.c
@@ -29,8 +29,6 @@
 #include <command.h>
 #include <spi.h>
 
-#if defined(CONFIG_CMD_SPI)
-
 /*-----------------------------------------------------------------------
  * Definitions
  */
@@ -139,5 +137,3 @@ U_BOOT_CMD(
 	"<bit_len> - Number of bits to send (base 10)\n"
 	"<dout>    - Hexadecimal string that gets sent\n"
 );
-
-#endif
diff --git a/common/cmd_universe.c b/common/cmd_universe.c
index 8bf0b1f1e..ea977828a 100644
--- a/common/cmd_universe.c
+++ b/common/cmd_universe.c
@@ -28,8 +28,6 @@
 
 #include <universe.h>
 
-#if defined(CONFIG_CMD_UNIVERSE)
-
 #define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
 #define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042
 
@@ -386,5 +384,3 @@ U_BOOT_CMD(
 	"                                      02 -> D16 Data Width\n"
 	"                                      03 -> D32 Data Width\n"
 );
-
-#endif
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 45e07f175..c6b17c2ab 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -29,9 +29,6 @@
 #include <command.h>
 #include <asm/byteorder.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_USB)
-
 #include <usb.h>
 
 #ifdef CONFIG_USB_STORAGE
@@ -608,12 +605,6 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 1;
 }
 
-
-#endif
-
-
-#if defined(CONFIG_CMD_USB)
-
 #ifdef CONFIG_USB_STORAGE
 U_BOOT_CMD(
 	usb,	5,	1,	do_usb,
@@ -645,4 +636,3 @@ U_BOOT_CMD(
 	"usb  info [dev] - show available USB devices\n"
 );
 #endif
-#endif
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 175d59eb9..b5ee6e960 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -24,13 +24,11 @@
 #include <common.h>
 #include <linux/ctype.h>
 #include <linux/types.h>
-
-#ifdef CONFIG_OF_LIBFDT
-
 #include <asm/global_data.h>
 #include <fdt.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <exports.h>
 
 /*
  * Global data (for the gd->bd)
@@ -44,6 +42,69 @@ struct fdt_header *fdt;
 
 /********************************************************************/
 
+/**
+ * fdt_find_and_setprop: Find a node and set it's property
+ *
+ * @fdt: ptr to device tree
+ * @node: path of node
+ * @prop: property name
+ * @val: ptr to new value
+ * @len: length of new property value
+ * @create: flag to create the property if it doesn't exist
+ *
+ * Convenience function to directly set a property given the path to the node.
+ */
+int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
+			 const void *val, int len, int create)
+{
+	int nodeoff = fdt_path_offset(fdt, node);
+
+	if (nodeoff < 0)
+		return nodeoff;
+
+	if ((!create) && (fdt_get_property(fdt, nodeoff, prop, 0) == NULL))
+		return 0; /* create flag not set; so exit quietly */
+
+	return fdt_setprop(fdt, nodeoff, prop, val, len);
+}
+
+#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
+static int fdt_fixup_stdout(void *fdt, int choosenoff)
+{
+	int err = 0;
+#ifdef CONFIG_CONS_INDEX
+	int node;
+	char sername[9] = { 0 };
+	const char *path;
+
+	sprintf(sername, "serial%d", CONFIG_CONS_INDEX - 1);
+
+	err = node = fdt_path_offset(fdt, "/aliases");
+	if (node >= 0) {
+		int len;
+		path = fdt_getprop(fdt, node, sername, &len);
+		if (path) {
+			char *p = malloc(len);
+			err = -FDT_ERR_NOSPACE;
+			if (p) {
+				memcpy(p, path, len);
+				err = fdt_setprop(fdt, choosenoff,
+					"linux,stdout-path", p, len);
+				free(p);
+			}
+		} else {
+			err = len;
+		}
+	}
+#endif
+	if (err < 0)
+		printf("WARNING: could not set linux,stdout-path %s.\n",
+				fdt_strerror(err));
+
+	return err;
+}
+#endif
+
 int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 {
 	int   nodeoffset;
@@ -58,34 +119,23 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 	}
 
 	if (initrd_start && initrd_end) {
-		struct fdt_reserve_entry re;
-		int  used;
-		int  total;
+		uint64_t addr, size;
+		int  total = fdt_num_mem_rsv(fdt);
 		int  j;
 
-		err = fdt_num_reservemap(fdt, &used, &total);
-		if (err < 0) {
-			printf("fdt_chosen: %s\n", fdt_strerror(err));
-			return err;
-		}
-		if (used >= total) {
-			printf("WARNING: "
-				"no room in the reserved map (%d of %d)\n",
-				used, total);
-			return -1;
-		}
 		/*
 		 * Look for an existing entry and update it.  If we don't find
 		 * the entry, we will j be the next available slot.
 		 */
-		for (j = 0; j < used; j++) {
-			err = fdt_get_reservemap(fdt, j, &re);
-			if (re.address == initrd_start) {
+		for (j = 0; j < total; j++) {
+			err = fdt_get_mem_rsv(fdt, j, &addr, &size);
+			if (addr == initrd_start) {
+				fdt_del_mem_rsv(fdt, j);
 				break;
 			}
 		}
-		err = fdt_replace_reservemap_entry(fdt, j,
-			initrd_start, initrd_end - initrd_start + 1);
+
+		err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start + 1);
 		if (err < 0) {
 			printf("fdt_chosen: %s\n", fdt_strerror(err));
 			return err;
@@ -95,7 +145,7 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 	/*
 	 * Find the "chosen" node.
 	 */
-	nodeoffset = fdt_find_node_by_path (fdt, "/chosen");
+	nodeoffset = fdt_path_offset (fdt, "/chosen");
 
 	/*
 	 * If we have a "chosen" node already the "force the writing"
@@ -145,6 +195,11 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 			printf("WARNING: could not set linux,initrd-end %s.\n",
 				fdt_strerror(err));
 	}
+
+#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
+	err = fdt_fixup_stdout(fdt, nodeoffset);
+#endif
+
 #ifdef OF_STDOUT_PATH
 	err = fdt_setprop(fdt, nodeoffset,
 		"linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
@@ -182,7 +237,7 @@ int fdt_env(void *fdt)
 	 * See if we already have a "u-boot-env" node, delete it if so.
 	 * Then create a new empty node.
 	 */
-	nodeoffset = fdt_find_node_by_path (fdt, "/u-boot-env");
+	nodeoffset = fdt_path_offset (fdt, "/u-boot-env");
 	if (nodeoffset >= 0) {
 		err = fdt_del_node(fdt, nodeoffset);
 		if (err < 0) {
@@ -304,7 +359,7 @@ int fdt_bd_t(void *fdt)
 	 * See if we already have a "bd_t" node, delete it if so.
 	 * Then create a new empty node.
 	 */
-	nodeoffset = fdt_find_node_by_path (fdt, "/bd_t");
+	nodeoffset = fdt_path_offset (fdt, "/bd_t");
 	if (nodeoffset >= 0) {
 		err = fdt_del_node(fdt, nodeoffset);
 		if (err < 0) {
@@ -348,4 +403,208 @@ int fdt_bd_t(void *fdt)
 }
 #endif /* ifdef CONFIG_OF_HAS_BD_T */
 
-#endif /* CONFIG_OF_LIBFDT */
+void do_fixup_by_path(void *fdt, const char *path, const char *prop,
+		      const void *val, int len, int create)
+{
+#if defined(DEBUG)
+	int i;
+	debug("Updating property '%s/%s' = ", node, prop);
+	for (i = 0; i < len; i++)
+		debug(" %.2x", *(u8*)(val+i));
+	debug("\n");
+#endif
+	int rc = fdt_find_and_setprop(fdt, path, prop, val, len, create);
+	if (rc)
+		printf("Unable to update property %s:%s, err=%s\n",
+			path, prop, fdt_strerror(rc));
+}
+
+void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
+			  u32 val, int create)
+{
+	val = cpu_to_fdt32(val);
+	do_fixup_by_path(fdt, path, prop, &val, sizeof(val), create);
+}
+
+void do_fixup_by_prop(void *fdt,
+		      const char *pname, const void *pval, int plen,
+		      const char *prop, const void *val, int len,
+		      int create)
+{
+	int off;
+#if defined(DEBUG)
+	int i;
+	debug("Updating property '%s/%s' = ", node, prop);
+	for (i = 0; i < len; i++)
+		debug(" %.2x", *(u8*)(val+i));
+	debug("\n");
+#endif
+	off = fdt_node_offset_by_prop_value(fdt, -1, pname, pval, plen);
+	while (off != -FDT_ERR_NOTFOUND) {
+		if (create || (fdt_get_property(fdt, off, prop, 0) != NULL))
+			fdt_setprop(fdt, off, prop, val, len);
+		off = fdt_node_offset_by_prop_value(fdt, off, pname, pval, plen);
+	}
+}
+
+void do_fixup_by_prop_u32(void *fdt,
+			  const char *pname, const void *pval, int plen,
+			  const char *prop, u32 val, int create)
+{
+	val = cpu_to_fdt32(val);
+	do_fixup_by_prop(fdt, pname, pval, plen, prop, &val, 4, create);
+}
+
+void do_fixup_by_compat(void *fdt, const char *compat,
+			const char *prop, const void *val, int len, int create)
+{
+	int off = -1;
+#if defined(DEBUG)
+	int i;
+	debug("Updating property '%s/%s' = ", node, prop);
+	for (i = 0; i < len; i++)
+		debug(" %.2x", *(u8*)(val+i));
+	debug("\n");
+#endif
+	off = fdt_node_offset_by_compatible(fdt, -1, compat);
+	while (off != -FDT_ERR_NOTFOUND) {
+		if (create || (fdt_get_property(fdt, off, prop, 0) != NULL))
+			fdt_setprop(fdt, off, prop, val, len);
+		off = fdt_node_offset_by_compatible(fdt, off, compat);
+	}
+}
+
+void do_fixup_by_compat_u32(void *fdt, const char *compat,
+			    const char *prop, u32 val, int create)
+{
+	val = cpu_to_fdt32(val);
+	do_fixup_by_compat(fdt, compat, prop, &val, 4, create);
+}
+
+int fdt_fixup_memory(void *blob, u64 start, u64 size)
+{
+	int err, nodeoffset, len = 0;
+	u8 tmp[16];
+	const u32 *addrcell, *sizecell;
+
+	err = fdt_check_header(blob);
+	if (err < 0) {
+		printf("%s: %s\n", __FUNCTION__, fdt_strerror(err));
+		return err;
+	}
+
+	/* update, or add and update /memory node */
+	nodeoffset = fdt_path_offset(blob, "/memory");
+	if (nodeoffset < 0) {
+		nodeoffset = fdt_add_subnode(blob, 0, "memory");
+		if (nodeoffset < 0)
+			printf("WARNING: could not create /memory: %s.\n",
+					fdt_strerror(nodeoffset));
+		return nodeoffset;
+	}
+	err = fdt_setprop(blob, nodeoffset, "device_type", "memory",
+			sizeof("memory"));
+	if (err < 0) {
+		printf("WARNING: could not set %s %s.\n", "device_type",
+				fdt_strerror(err));
+		return err;
+	}
+
+	addrcell = fdt_getprop(blob, 0, "#address-cells", NULL);
+	/* use shifts and mask to ensure endianness */
+	if ((addrcell) && (*addrcell == 2)) {
+		tmp[0] = (start >> 56) & 0xff;
+		tmp[1] = (start >> 48) & 0xff;
+		tmp[2] = (start >> 40) & 0xff;
+		tmp[3] = (start >> 32) & 0xff;
+		tmp[4] = (start >> 24) & 0xff;
+		tmp[5] = (start >> 16) & 0xff;
+		tmp[6] = (start >>  8) & 0xff;
+		tmp[7] = (start      ) & 0xff;
+		len = 8;
+	} else {
+		tmp[0] = (start >> 24) & 0xff;
+		tmp[1] = (start >> 16) & 0xff;
+		tmp[2] = (start >>  8) & 0xff;
+		tmp[3] = (start      ) & 0xff;
+		len = 4;
+	}
+
+	sizecell = fdt_getprop(blob, 0, "#size-cells", NULL);
+	/* use shifts and mask to ensure endianness */
+	if ((sizecell) && (*sizecell == 2)) {
+		tmp[0+len] = (size >> 56) & 0xff;
+		tmp[1+len] = (size >> 48) & 0xff;
+		tmp[2+len] = (size >> 40) & 0xff;
+		tmp[3+len] = (size >> 32) & 0xff;
+		tmp[4+len] = (size >> 24) & 0xff;
+		tmp[5+len] = (size >> 16) & 0xff;
+		tmp[6+len] = (size >>  8) & 0xff;
+		tmp[7+len] = (size      ) & 0xff;
+		len += 8;
+	} else {
+		tmp[0+len] = (size >> 24) & 0xff;
+		tmp[1+len] = (size >> 16) & 0xff;
+		tmp[2+len] = (size >>  8) & 0xff;
+		tmp[3+len] = (size      ) & 0xff;
+		len += 4;
+	}
+
+	err = fdt_setprop(blob, nodeoffset, "reg", tmp, len);
+	if (err < 0) {
+		printf("WARNING: could not set %s %s.\n",
+				"reg", fdt_strerror(err));
+		return err;
+	}
+	return 0;
+}
+
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+
+void fdt_fixup_ethernet(void *fdt, bd_t *bd)
+{
+	int node;
+	const char *path;
+
+	node = fdt_path_offset(fdt, "/aliases");
+	if (node >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+		path = fdt_getprop(fdt, node, "ethernet0", NULL);
+		if (path) {
+			do_fixup_by_path(fdt, path, "mac-address",
+				bd->bi_enetaddr, 6, 0);
+			do_fixup_by_path(fdt, path, "local-mac-address",
+				bd->bi_enetaddr, 6, 1);
+		}
+#endif
+#if defined(CONFIG_HAS_ETH1)
+		path = fdt_getprop(fdt, node, "ethernet1", NULL);
+		if (path) {
+			do_fixup_by_path(fdt, path, "mac-address",
+				bd->bi_enet1addr, 6, 0);
+			do_fixup_by_path(fdt, path, "local-mac-address",
+				bd->bi_enet1addr, 6, 1);
+		}
+#endif
+#if defined(CONFIG_HAS_ETH2)
+		path = fdt_getprop(fdt, node, "ethernet2", NULL);
+		if (path) {
+			do_fixup_by_path(fdt, path, "mac-address",
+				bd->bi_enet2addr, 6, 0);
+			do_fixup_by_path(fdt, path, "local-mac-address",
+				bd->bi_enet2addr, 6, 1);
+		}
+#endif
+#if defined(CONFIG_HAS_ETH3)
+		path = fdt_getprop(fdt, node, "ethernet3", NULL);
+		if (path) {
+			do_fixup_by_path(fdt, path, "mac-address",
+				bd->bi_enet3addr, 6, 0);
+			do_fixup_by_path(fdt, path, "local-mac-address",
+				bd->bi_enet3addr, 6, 1);
+		}
+#endif
+	}
+}
+#endif
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index c69501fed..281f0b29e 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -49,10 +49,10 @@
 struct mii_dev {
 	struct list_head link;
 	char *name;
-	int (* read)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short *value);
-	int (* write)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short value);
+	int (*read) (char *devname, unsigned char addr,
+		     unsigned char reg, unsigned short *value);
+	int (*write) (char *devname, unsigned char addr,
+		      unsigned char reg, unsigned short value);
 };
 
 static struct list_head mii_devs;
@@ -62,21 +62,21 @@ static struct mii_dev *current_mii;
  *
  * Initialize global data. Need to be called before any other miiphy routine.
  */
-void miiphy_init()
+void miiphy_init ()
 {
-		INIT_LIST_HEAD(&mii_devs);
-		current_mii = NULL;
+	INIT_LIST_HEAD (&mii_devs);
+	current_mii = NULL;
 }
 
 /*****************************************************************************
  *
  * Register read and write MII access routines for the device <name>.
  */
-void miiphy_register(char *name,
-		int (* read)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short *value),
-		int (* write)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short value))
+void miiphy_register (char *name,
+		      int (*read) (char *devname, unsigned char addr,
+				   unsigned char reg, unsigned short *value),
+		      int (*write) (char *devname, unsigned char addr,
+				    unsigned char reg, unsigned short value))
 {
 	struct list_head *entry;
 	struct mii_dev *new_dev;
@@ -84,63 +84,64 @@ void miiphy_register(char *name,
 	unsigned int name_len;
 
 	/* check if we have unique name */
-	list_for_each(entry, &mii_devs) {
-		miidev = list_entry(entry, struct mii_dev, link);
-		if (strcmp(miidev->name, name) == 0) {
-			printf("miiphy_register: non unique device name '%s'\n",
-					name);
+	list_for_each (entry, &mii_devs) {
+		miidev = list_entry (entry, struct mii_dev, link);
+		if (strcmp (miidev->name, name) == 0) {
+			printf ("miiphy_register: non unique device name "
+				"'%s'\n", name);
 			return;
 		}
 	}
 
 	/* allocate memory */
-	name_len = strlen(name);
-	new_dev = (struct mii_dev *)malloc(sizeof(struct mii_dev) + name_len + 1);
+	name_len = strlen (name);
+	new_dev =
+	    (struct mii_dev *)malloc (sizeof (struct mii_dev) + name_len + 1);
 
-	if(new_dev == NULL) {
-		printf("miiphy_register: cannot allocate memory for '%s'\n",
-				name);
+	if (new_dev == NULL) {
+		printf ("miiphy_register: cannot allocate memory for '%s'\n",
+			name);
 		return;
 	}
-	memset(new_dev, 0, sizeof(struct mii_dev) + name_len);
+	memset (new_dev, 0, sizeof (struct mii_dev) + name_len);
 
 	/* initalize mii_dev struct fields */
-	INIT_LIST_HEAD(&new_dev->link);
+	INIT_LIST_HEAD (&new_dev->link);
 	new_dev->read = read;
 	new_dev->write = write;
 	new_dev->name = (char *)(new_dev + 1);
-	strncpy(new_dev->name, name, name_len);
+	strncpy (new_dev->name, name, name_len);
 	new_dev->name[name_len] = '\0';
 
-	debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
-			new_dev->name, new_dev->read, new_dev->write);
+	debug ("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
+	       new_dev->name, new_dev->read, new_dev->write);
 
 	/* add it to the list */
-	list_add_tail(&new_dev->link, &mii_devs);
+	list_add_tail (&new_dev->link, &mii_devs);
 
 	if (!current_mii)
 		current_mii = new_dev;
 }
 
-int miiphy_set_current_dev(char *devname)
+int miiphy_set_current_dev (char *devname)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
 
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			current_mii = dev;
 			return 0;
 		}
 	}
 
-	printf("No such device: %s\n", devname);
+	printf ("No such device: %s\n", devname);
 	return 1;
 }
 
-char *miiphy_get_current_dev()
+char *miiphy_get_current_dev ()
 {
 	if (current_mii)
 		return current_mii->name;
@@ -156,8 +157,8 @@ char *miiphy_get_current_dev()
  * Returns:
  *   0 on success
  */
-int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		unsigned short *value)
+int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+		 unsigned short *value)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
@@ -165,22 +166,22 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
 	int read_ret = 0;
 
 	if (!devname) {
-		printf("NULL device name!\n");
+		printf ("NULL device name!\n");
 		return 1;
 	}
 
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			found_dev = 1;
-			read_ret = dev->read(devname, addr, reg, value);
+			read_ret = dev->read (devname, addr, reg, value);
 			break;
 		}
 	}
 
 	if (found_dev == 0)
-		printf("No such device: %s\n", devname);
+		printf ("No such device: %s\n", devname);
 
 	return ((found_dev) ? read_ret : 1);
 }
@@ -193,8 +194,8 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
  * Returns:
  *   0 on success
  */
-int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-		unsigned short value)
+int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+		  unsigned short value)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
@@ -202,22 +203,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
 	int write_ret = 0;
 
 	if (!devname) {
-		printf("NULL device name!\n");
+		printf ("NULL device name!\n");
 		return 1;
 	}
 
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			found_dev = 1;
-			write_ret = dev->write(devname, addr, reg, value);
+			write_ret = dev->write (devname, addr, reg, value);
 			break;
 		}
 	}
 
 	if (found_dev == 0)
-		printf("No such device: %s\n", devname);
+		printf ("No such device: %s\n", devname);
 
 	return ((found_dev) ? write_ret : 1);
 }
@@ -226,23 +227,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
  *
  * Print out list of registered MII capable devices.
  */
-void miiphy_listdev(void)
+void miiphy_listdev (void)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
 
-	puts("MII devices: ");
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
-		printf("'%s' ", dev->name);
+	puts ("MII devices: ");
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
+		printf ("'%s' ", dev->name);
 	}
-	puts("\n");
+	puts ("\n");
 
 	if (current_mii)
-		printf("Current device: '%s'\n", current_mii->name);
+		printf ("Current device: '%s'\n", current_mii->name);
 }
 
-
 /*****************************************************************************
  *
  * Read the OUI, manufacture's model number, and revision number.
@@ -254,9 +254,7 @@ void miiphy_listdev(void)
  * Returns:
  *   0 on success
  */
-int miiphy_info (char *devname,
-		 unsigned char addr,
-		 unsigned int *oui,
+int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
 		 unsigned char *model, unsigned char *rev)
 {
 	unsigned int reg = 0;
@@ -288,13 +286,12 @@ int miiphy_info (char *devname,
 #ifdef DEBUG
 	printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
 #endif
-	*oui   =                 ( reg >> 10);
-	*model = (unsigned char) ((reg >>  4) & 0x0000003F);
-	*rev   = (unsigned char) ( reg        & 0x0000000F);
+	*oui = (reg >> 10);
+	*model = (unsigned char)((reg >> 4) & 0x0000003F);
+	*rev = (unsigned char)(reg & 0x0000000F);
 	return (0);
 }
 
-
 /*****************************************************************************
  *
  * Reset the PHY.
@@ -345,104 +342,138 @@ int miiphy_reset (char *devname, unsigned char addr)
 	return (0);
 }
 
-
 /*****************************************************************************
  *
- * Determine the ethernet speed (10/100).
+ * Determine the ethernet speed (10/100/1000).  Return 10 on error.
  */
 int miiphy_speed (char *devname, unsigned char addr)
 {
-	unsigned short reg;
+	u16 bmcr, anlpar;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
-		printf ("PHY 1000BT Status read failed\n");
-	} else {
-		if (reg != 0xFFFF) {
-			if ((reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) !=0) {
-				return (_1000BASET);
-			}
-		}
+	u16 btsr;
+
+	/*
+	 * Check for 1000BASE-X.  If it is supported, then assume that the speed
+	 * is 1000.
+	 */
+	if (miiphy_is_1000base_x (devname, addr)) {
+		return _1000BASET;
+	}
+	/*
+	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+	 */
+	/* Check for 1000BASE-T. */
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+		printf ("PHY 1000BT status");
+		goto miiphy_read_failed;
+	}
+	if (btsr != 0xFFFF &&
+	    (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+		return _1000BASET;
 	}
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
-		puts ("PHY speed read failed, assuming 10bT\n");
-		return (_10BASET);
+	if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+		printf ("PHY speed");
+		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
-	if ((reg & PHY_BMCR_AUTON) != 0) {
+	if (bmcr & PHY_BMCR_AUTON) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
-			puts ("PHY AN speed read failed, assuming 10bT\n");
-			return (_10BASET);
-		}
-		if ((reg & PHY_ANLPAR_100) != 0) {
-			return (_100BASET);
-		} else {
-			return (_10BASET);
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+			printf ("PHY AN speed");
+			goto miiphy_read_failed;
 		}
+		return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET;
 	}
 	/* Get speed from basic control settings. */
-	else if (reg & PHY_BMCR_100MB) {
-		return (_100BASET);
-	} else {
-		return (_10BASET);
-	}
+	return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET;
 
+      miiphy_read_failed:
+	printf (" read failed, assuming 10BASE-T\n");
+	return _10BASET;
 }
 
-
 /*****************************************************************************
  *
- * Determine full/half duplex.
+ * Determine full/half duplex.  Return half on error.
  */
 int miiphy_duplex (char *devname, unsigned char addr)
 {
-	unsigned short reg;
+	u16 bmcr, anlpar;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
-		printf ("PHY 1000BT Status read failed\n");
-	} else {
-		if ( (reg != 0xFFFF) &&
-		     (reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) ) {
-			if ((reg & PHY_1000BTSR_1000FD) !=0) {
-				return (FULL);
-			} else {
-				return (HALF);
-			}
+	u16 btsr;
+
+	/* Check for 1000BASE-X. */
+	if (miiphy_is_1000base_x (devname, addr)) {
+		/* 1000BASE-X */
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+			printf ("1000BASE-X PHY AN duplex");
+			goto miiphy_read_failed;
+		}
+	}
+	/*
+	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+	 */
+	/* Check for 1000BASE-T. */
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+		printf ("PHY 1000BT status");
+		goto miiphy_read_failed;
+	}
+	if (btsr != 0xFFFF) {
+		if (btsr & PHY_1000BTSR_1000FD) {
+			return FULL;
+		} else if (btsr & PHY_1000BTSR_1000HD) {
+			return HALF;
 		}
 	}
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
-		puts ("PHY duplex read failed, assuming half duplex\n");
-		return (HALF);
+	if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+		puts ("PHY duplex");
+		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
-	if ((reg & PHY_BMCR_AUTON) != 0) {
+	if (bmcr & PHY_BMCR_AUTON) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
-			puts ("PHY AN duplex read failed, assuming half duplex\n");
-			return (HALF);
-		}
-
-		if ((reg & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) != 0) {
-			return (FULL);
-		} else {
-			return (HALF);
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+			puts ("PHY AN duplex");
+			goto miiphy_read_failed;
 		}
+		return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ?
+		    FULL : HALF;
 	}
 	/* Get speed from basic control settings. */
-	else if (reg & PHY_BMCR_DPLX) {
-		return (FULL);
-	} else {
-		return (HALF);
-	}
+	return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF;
+
+      miiphy_read_failed:
+	printf (" read failed, assuming half duplex\n");
+	return HALF;
+}
 
+/*****************************************************************************
+ *
+ * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
+ * 1000BASE-T, or on error.
+ */
+int miiphy_is_1000base_x (char *devname, unsigned char addr)
+{
+#if defined(CONFIG_PHY_GIGE)
+	u16 exsr;
+
+	if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) {
+		printf ("PHY extended status read failed, assuming no "
+			"1000BASE-X\n");
+		return 0;
+	}
+	return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH));
+#else
+	return 0;
+#endif
 }
 
 #ifdef CFG_FAULT_ECHO_LINK_DOWN
@@ -455,7 +486,7 @@ int miiphy_link (char *devname, unsigned char addr)
 	unsigned short reg;
 
 	/* dummy read; needed to latch some phys */
-	(void)miiphy_read(devname, addr, PHY_BMSR, &reg);
+	(void)miiphy_read (devname, addr, PHY_BMSR, &reg);
 	if (miiphy_read (devname, addr, PHY_BMSR, &reg)) {
 		puts ("PHY_BMSR read failed, assuming no link\n");
 		return (0);
@@ -469,5 +500,4 @@ int miiphy_link (char *devname, unsigned char addr)
 	}
 }
 #endif
-
 #endif /* CONFIG_MII */
diff --git a/common/serial.c b/common/serial.c
index dee1cc0ab..b9916e2b5 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -41,7 +41,8 @@ struct serial_device *default_serial_console (void)
    || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
 	return &serial_scc_device;
 #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
-   || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+   || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
+   || defined(CONFIG_MPC5xxx)
 #if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL)
 #if (CONFIG_CONS_INDEX==1)
 	return &eserial1_device;
@@ -91,7 +92,8 @@ void serial_initialize (void)
 #endif
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+ || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
+ || defined(CONFIG_MPC5xxx)
 	serial_register(&serial0_device);
 	serial_register(&serial1_device);
 #endif
diff --git a/common/spartan2.c b/common/spartan2.c
index 0fb23b659..06550b985 100644
--- a/common/spartan2.c
+++ b/common/spartan2.c
@@ -516,7 +516,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				(*fn->clk) (FALSE, TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Write data */
-				(*fn->wr) ((val < 0), TRUE, cookie);
+				(*fn->wr) ((val & 0x80), TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Assert the clock */
 				(*fn->clk) (TRUE, TRUE, cookie);
diff --git a/common/spartan3.c b/common/spartan3.c
index c0f2b05e4..f7c4f8cf2 100644
--- a/common/spartan3.c
+++ b/common/spartan3.c
@@ -521,7 +521,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				(*fn->clk) (FALSE, TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Write data */
-				(*fn->wr) ((val < 0), TRUE, cookie);
+				(*fn->wr) ((val & 0x80), TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Assert the clock */
 				(*fn->clk) (TRUE, TRUE, cookie);
diff --git a/common/usb.c b/common/usb.c
index 933afa9e7..4df01eabe 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -53,7 +53,7 @@
 
 #include <usb.h>
 #ifdef CONFIG_4xx
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 #endif
 
 #undef USB_DEBUG
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 0f79f367c..443d78574 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -1195,7 +1195,7 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
 	dev_desc->product[16] = 0;
 	dev_desc->revision[4] = 0;
 #ifdef CONFIG_USB_BIN_FIXUP
-	usb_bin_fixup(dev->descriptor, dev_desc->vendor, dev_desc->product);
+	usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor, (uchar *)dev_desc->product);
 #endif /* CONFIG_USB_BIN_FIXUP */
 	USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]);
 	if(usb_test_unit_ready(pccb,ss)) {
diff --git a/config.mk b/config.mk
index 37d61a0c8..79e5a31b7 100644
--- a/config.mk
+++ b/config.mk
@@ -87,6 +87,9 @@ ifdef	BOARD
 sinclude $(TOPDIR)/board/$(BOARDDIR)/config.mk	# include board specific rules
 endif
 
+# Load generated board configuration
+sinclude $(OBJTREE)/include/autoconf.mk
+
 #########################################################################
 
 CONFIG_SHELL	:= $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index 0ff36c596..1ed9bf307 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(SOC).a
 
 COBJS	= i2c.o interrupts.o serial.o speed.o \
-	  usb.o
+	  usb.o usb_ohci.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index 869ca79d0..4075f2e18 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -498,7 +498,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 		if (ohci->ed_controltail == NULL) {
 			writel (ed, &ohci->regs->ed_controlhead);
 		} else {
-			ohci->ed_controltail->hwNextED = m32_swap (ed);
+			ohci->ed_controltail->hwNextED = (__u32)m32_swap (ed);
 		}
 		ed->ed_prev = ohci->ed_controltail;
 		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
@@ -514,7 +514,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 		if (ohci->ed_bulktail == NULL) {
 			writel (ed, &ohci->regs->ed_bulkhead);
 		} else {
-			ohci->ed_bulktail->hwNextED = m32_swap (ed);
+			ohci->ed_bulktail->hwNextED = (__u32)m32_swap (ed);
 		}
 		ed->ed_prev = ohci->ed_bulktail;
 		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
@@ -606,7 +606,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 		ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
 		/* dummy td; end of td list for ed */
 		td = td_alloc (usb_dev);
-		ed->hwTailP = m32_swap (td);
+		ed->hwTailP = (__u32)m32_swap (td);
 		ed->hwHeadP = ed->hwTailP;
 		ed->state = ED_UNLINK;
 		ed->type = usb_pipetype (pipe);
@@ -663,13 +663,13 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 	if (!len)
 		data = 0;
 
-	td->hwINFO = m32_swap (info);
-	td->hwCBP = m32_swap (data);
+	td->hwINFO = (__u32)m32_swap (info);
+	td->hwCBP = (__u32)m32_swap (data);
 	if (data)
-		td->hwBE = m32_swap (data + len - 1);
+		td->hwBE = (__u32)m32_swap (data + len - 1);
 	else
 		td->hwBE = 0;
-	td->hwNextTD = m32_swap (td_pt);
+	td->hwNextTD = (__u32)m32_swap (td_pt);
 
 	/* append to queue */
 	td->ed->hwTailP = td->hwNextTD;
diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap700x/Makefile
index d27671211..d27671211 100644
--- a/cpu/at32ap/at32ap7000/Makefile
+++ b/cpu/at32ap/at32ap700x/Makefile
diff --git a/cpu/at32ap/at32ap7000/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
index 52f5372a6..859124a91 100644
--- a/cpu/at32ap/at32ap7000/gpio.c
+++ b/cpu/at32ap/at32ap700x/gpio.c
@@ -21,6 +21,7 @@
  */
 #include <common.h>
 
+#include <asm/arch/chip-features.h>
 #include <asm/arch/gpio.h>
 
 /*
@@ -52,6 +53,7 @@ void gpio_enable_ebi(void)
 #endif
 }
 
+#ifdef AT32AP700x_CHIP_HAS_USART
 void gpio_enable_usart0(void)
 {
 	gpio_select_periph_B(GPIO_PIN_PA8, 0);
@@ -72,10 +74,12 @@ void gpio_enable_usart2(void)
 
 void gpio_enable_usart3(void)
 {
+	gpio_select_periph_B(GPIO_PIN_PB17, 0);
 	gpio_select_periph_B(GPIO_PIN_PB18, 0);
-	gpio_select_periph_B(GPIO_PIN_PB19, 0);
 }
+#endif
 
+#ifdef AT32AP700x_CHIP_HAS_MACB
 void gpio_enable_macb0(void)
 {
 	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
@@ -125,7 +129,9 @@ void gpio_enable_macb1(void)
 	gpio_select_periph_B(GPIO_PIN_PD15, 0);	/* SPD	*/
 #endif
 }
+#endif
 
+#ifdef AT32AP700x_CHIP_HAS_MMCI
 void gpio_enable_mmci(void)
 {
 	gpio_select_periph_A(GPIO_PIN_PA10, 0);	/* CLK	 */
@@ -135,3 +141,4 @@ void gpio_enable_mmci(void)
 	gpio_select_periph_A(GPIO_PIN_PA14, 0);	/* DATA2 */
 	gpio_select_periph_A(GPIO_PIN_PA15, 0);	/* DATA3 */
 }
+#endif
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index cf48be10b..f59dfb599 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -198,11 +198,11 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
 
 	/* Put the device into Transfer state */
 	ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
-	if (ret) goto fail;
+	if (ret) goto out;
 
 	/* Set block length */
 	ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
-	if (ret) goto fail;
+	if (ret) goto out;
 
 	pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
 
@@ -211,7 +211,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
 			      start * mmc_blkdev.blksz, resp,
 			      (R1 | NCR | TRCMD_START | TRDIR_READ
 			       | TRTYP_BLOCK));
-		if (ret) goto fail;
+		if (ret) goto out;
 
 		ret = -EIO;
 		wordcount = 0;
@@ -219,7 +219,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
 			do {
 				status = mmci_readl(SR);
 				if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
-					goto fail;
+					goto read_error;
 			} while (!(status & MMCI_BIT(RXRDY)));
 
 			if (status & MMCI_BIT(RXRDY)) {
@@ -244,9 +244,10 @@ out:
 	mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
 	return i;
 
-fail:
+read_error:
 	mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
-	printf("mmc: bread failed, card status = %08x\n", card_status);
+	printf("mmc: bread failed, status = %08x, card status = %08x\n",
+	       status, card_status);
 	goto out;
 }
 
diff --git a/cpu/mcf523x/config.mk b/cpu/mcf523x/config.mk
index ba324a894..93645a31e 100644
--- a/cpu/mcf523x/config.mk
+++ b/cpu/mcf523x/config.mk
@@ -24,4 +24,8 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=5235 -fPIC
+else
 PLATFORM_CPPFLAGS += -m5307 -fPIC
+endif
diff --git a/cpu/mcf52x2/config.mk b/cpu/mcf52x2/config.mk
index 650db8583..f97157d04 100644
--- a/cpu/mcf52x2/config.mk
+++ b/cpu/mcf52x2/config.mk
@@ -24,4 +24,33 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5249=$(shell grep CONFIG_M5249 $(TOPDIR)/include/$(cfg))
+is5253=$(shell grep CONFIG_M5253 $(TOPDIR)/include/$(cfg))
+is5271=$(shell grep CONFIG_M5271 $(TOPDIR)/include/$(cfg))
+is5272=$(shell grep CONFIG_M5272 $(TOPDIR)/include/$(cfg))
+is5282=$(shell grep CONFIG_M5282 $(TOPDIR)/include/$(cfg))
+
+
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+
+ifneq (,$(findstring CONFIG_M5249,$(is5249)))
+PLATFORM_CPPFLAGS += -mcpu=5249
+endif
+ifneq (,$(findstring CONFIG_M5253,$(is5253)))
+PLATFORM_CPPFLAGS += -mcpu=5253
+endif
+ifneq (,$(findstring CONFIG_M5271,$(is5271)))
+PLATFORM_CPPFLAGS += -mcpu=5271
+endif
+ifneq (,$(findstring CONFIG_M5272,$(is5272)))
+PLATFORM_CPPFLAGS += -mcpu=5272
+endif
+ifneq (,$(findstring CONFIG_M5282,$(is5282)))
+PLATFORM_CPPFLAGS += -mcpu=5282
+endif
+
+else
 PLATFORM_CPPFLAGS += -m5307
+endif
diff --git a/cpu/mcf532x/config.mk b/cpu/mcf532x/config.mk
index ba324a894..16a0bc326 100644
--- a/cpu/mcf532x/config.mk
+++ b/cpu/mcf532x/config.mk
@@ -24,4 +24,8 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=5329 -fPIC
+else
 PLATFORM_CPPFLAGS += -m5307 -fPIC
+endif
diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c
index 2f62e956c..89cc8ad93 100644
--- a/cpu/mcf532x/cpu.c
+++ b/cpu/mcf532x/cpu.c
@@ -35,14 +35,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
 {
-	volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
+	volatile rcm_t *rcm = (rcm_t *) (MMAP_RCM);
 
-	wdp->cr = 0;
 	udelay(1000);
-
-	/* enable watchdog, set timeout to 0 and wait */
-	wdp->cr = WTM_WCR_EN;
-	while (1) ;
+	rcm->rcr |= RCM_RCR_SOFTRST;
 
 	/* we don't return! */
 	return 0;
diff --git a/cpu/mcf5445x/config.mk b/cpu/mcf5445x/config.mk
index d0c72fb6b..88433f2f6 100644
--- a/cpu/mcf5445x/config.mk
+++ b/cpu/mcf5445x/config.mk
@@ -24,4 +24,8 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC
+else
 PLATFORM_CPPFLAGS += -m5407 -fPIC
+endif
diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S
index cd989ab62..423583d04 100644
--- a/cpu/mcf5445x/start.S
+++ b/cpu/mcf5445x/start.S
@@ -136,7 +136,7 @@ _start:
 	movec	%d0, %VBR
 
 	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
-	movec	%d0, %RAMBAR0
+	movec	%d0, %RAMBAR1
 
 	/* initialize general use internal ram */
 	move.l #0, %d0
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index b69741ae6..d70c5fe98 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -90,6 +90,65 @@ mac_fifo_t mac_fifo[NO_OF_FIFOS];
 
 #define MAX_WAIT 1000
 
+#if defined(CONFIG_CMD_MII)
+int  au1x00_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short * value)
+{
+	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
+	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
+	u32 mii_control;
+	unsigned int timedout = 20;
+
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_read busy timeout!!\n");
+			return -1;
+		}
+	}
+
+	mii_control = MAC_SET_MII_SELECT_REG(reg) |
+		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
+
+	*mii_control_reg = mii_control;
+
+	timedout = 20;
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_read busy timeout!!\n");
+			return -1;
+		}
+	}
+	*value = *mii_data_reg;
+	return 0;
+}
+
+int  au1x00_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
+{
+	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
+	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
+	u32 mii_control;
+	unsigned int timedout = 20;
+
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_write busy timeout!!\n");
+			return -1;
+		}
+	}
+
+	mii_control = MAC_SET_MII_SELECT_REG(reg) |
+		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
+
+	*mii_data_reg = value;
+	*mii_control_reg = mii_control;
+	return 0;
+}
+#endif
+
 static int au1x00_send(struct eth_device* dev, volatile void *packet, int length){
 	volatile mac_fifo_t *fifo_tx =
 		(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
@@ -249,63 +308,4 @@ int au1x00_enet_initialize(bd_t *bis){
 	return 1;
 }
 
-#if defined(CONFIG_CMD_MII)
-int  au1x00_miiphy_read(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short * value)
-{
-	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
-	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
-	u32 mii_control;
-	unsigned int timedout = 20;
-
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_read busy timeout!!\n");
-			return -1;
-		}
-	}
-
-	mii_control = MAC_SET_MII_SELECT_REG(reg) |
-		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
-
-	*mii_control_reg = mii_control;
-
-	timedout = 20;
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_read busy timeout!!\n");
-			return -1;
-		}
-	}
-	*value = *mii_data_reg;
-	return 0;
-}
-
-int  au1x00_miiphy_write(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
-{
-	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
-	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
-	u32 mii_control;
-	unsigned int timedout = 20;
-
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_write busy timeout!!\n");
-			return;
-		}
-	}
-
-	mii_control = MAC_SET_MII_SELECT_REG(reg) |
-		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
-
-	*mii_data_reg = value;
-	*mii_control_reg = mii_control;
-	return 0;
-}
-#endif
-
 #endif /* CONFIG_AU1X00 */
diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
index aad76e0af..443240e54 100644
--- a/cpu/mips/cache.S
+++ b/cpu/mips/cache.S
@@ -22,7 +22,6 @@
  * MA 02111-1307 USA
  */
 
-
 #include <config.h>
 #include <version.h>
 #include <asm/regdef.h>
@@ -30,13 +29,11 @@
 #include <asm/addrspace.h>
 #include <asm/cacheops.h>
 
-
 	/* 16KB is the maximum size of instruction and data caches on
 	 * MIPS 4K.
 	 */
 #define MIPS_MAX_CACHE_SIZE	0x4000
 
-
 /*
  * cacheop macro to automate cache operations
  * first some helpers...
@@ -131,7 +128,6 @@ mips_cache_reset:
 	li	t4, CFG_CACHELINE_SIZE
 	move	t5, t4
 
-
 	li	v0, MIPS_MAX_CACHE_SIZE
 
 	/* Now clear that much memory starting from zero.
@@ -139,8 +135,8 @@ mips_cache_reset:
 
 	li	a0, KSEG1
 	addu	a1, a0, v0
-
-2:	sw	zero, 0(a0)
+2:
+	sw	zero, 0(a0)
 	sw	zero, 4(a0)
 	sw	zero, 8(a0)
 	sw	zero, 12(a0)
@@ -156,11 +152,11 @@ mips_cache_reset:
 
 	mtc0	zero, CP0_TAGLO
 
-   /*
-    * The caches are probably in an indeterminate state,
-    * so we force good parity into them by doing an
-    * invalidate, load/fill, invalidate for each line.
-    */
+	/*
+	 * The caches are probably in an indeterminate state,
+	 * so we force good parity into them by doing an
+	 * invalidate, load/fill, invalidate for each line.
+	 */
 
 	/* Assume bottom of RAM will generate good parity for the cache.
 	 */
@@ -201,9 +197,9 @@ mips_cache_reset:
 	move	a1, a2
 	icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
 
-	j  ra
-	.end  mips_cache_reset
+	j	ra
 
+	.end	mips_cache_reset
 
 /*******************************************************************************
 *
@@ -220,7 +216,7 @@ dcache_status:
 	andi	v0, v0, 1
 	j	ra
 
-	.end  dcache_status
+	.end	dcache_status
 
 /*******************************************************************************
 *
@@ -237,11 +233,10 @@ dcache_disable:
 	li	t1, -8
 	and	t0, t0, t1
 	ori	t0, t0, CONF_CM_UNCACHED
-	mtc0    t0, CP0_CONFIG
+	mtc0	t0, CP0_CONFIG
 	j	ra
 
-	.end  dcache_disable
-
+	.end	dcache_disable
 
 /*******************************************************************************
 *
@@ -266,4 +261,5 @@ mips_cache_lock:
 	icacheop(a0,a1,a2,a3,0x1d)
 
 	j	ra
+
 	.end	mips_cache_lock
diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
index 487c4eb5d..ad03bd61b 100644
--- a/cpu/mips/config.mk
+++ b/cpu/mips/config.mk
@@ -20,8 +20,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-v=$(shell \
-$(CROSS_COMPILE)as --version|grep "GNU assembler"|awk '{print $$3}'|awk -F . '{print $$2}')
+v=$(shell $(AS) --version |grep "GNU assembler" |cut -d. -f2)
 MIPSFLAGS=$(shell \
 if [ "$v" -lt "14" ]; then \
 	echo "-mcpu=4kc"; \
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
index f48675e99..7559ac657 100644
--- a/cpu/mips/cpu.c
+++ b/cpu/mips/cpu.c
@@ -39,12 +39,12 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-void flush_cache (ulong start_addr, ulong size)
+void flush_cache(ulong start_addr, ulong size)
 {
-
 }
 
-void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ){
+void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
+{
 	write_32bit_cp0_register(CP0_ENTRYLO0, low0);
 	write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
 	write_32bit_cp0_register(CP0_ENTRYLO1, low1);
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index 074d01d2d..c92b16278 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -22,13 +22,11 @@
  * MA 02111-1307 USA
  */
 
-
 #include <config.h>
 #include <version.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 
-
 #define RVECENT(f,n) \
    b f; nop
 #define XVECENT(f,bev) \
@@ -192,7 +190,7 @@ _start:
 	.word	0x00000000
 	.word	0x03e00008
 	.word	0x00000000
-	.word   0x00000000
+	.word	0x00000000
 /* 0xbfc00428 */
 	.word	0xdc870000
 	.word	0xfca70000
@@ -203,7 +201,7 @@ _start:
 	.word	0x00000000
 	.word	0x03e00008
 	.word	0x00000000
-	.word   0x00000000
+	.word	0x00000000
 #endif /* CONFIG_PURPLE */
 	.align 4
 reset:
@@ -235,33 +233,31 @@ reset:
 	mtc0	t0, CP0_CONFIG
 
 	/* Initialize $gp.
-	*/
-	bal     1f
+	 */
+	bal	1f
 	nop
 	.word	_gp
-	1:
-	move    gp, ra
-	lw      t1, 0(ra)
-	move	gp, t1
+1:
+	lw	gp, 0(ra)
 
 #ifdef CONFIG_INCA_IP
 	/* Disable INCA-IP Watchdog.
 	 */
-	la      t9, disable_incaip_wdt
-	jalr    t9
+	la	t9, disable_incaip_wdt
+	jalr	t9
 	nop
 #endif
 
 	/* Initialize any external memory.
 	 */
-	la      t9, lowlevel_init
-	jalr    t9
+	la	t9, lowlevel_init
+	jalr	t9
 	nop
 
 	/* Initialize caches...
 	 */
-	la      t9, mips_cache_reset
-	jalr    t9
+	la	t9, mips_cache_reset
+	jalr	t9
 	nop
 
 	/* ... and enable them.
@@ -269,12 +265,11 @@ reset:
 	li	t0, CONF_CM_CACHABLE_NONCOHERENT
 	mtc0	t0, CP0_CONFIG
 
-
 	/* Set up temporary stack.
 	 */
 	li	a0, CFG_INIT_SP_OFFSET
-	la      t9, mips_cache_lock
-	jalr    t9
+	la	t9, mips_cache_lock
+	jalr	t9
 	nop
 
 	li	t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
@@ -284,7 +279,6 @@ reset:
 	j	t9
 	nop
 
-
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
  *
@@ -298,7 +292,7 @@ reset:
 	.globl	relocate_code
 	.ent	relocate_code
 relocate_code:
-	move	sp, a0		/* Set new stack pointer		*/
+	move	sp, a0		/* Set new stack pointer	*/
 
 	li	t0, CFG_MONITOR_BASE
 	la	t3, in_ram
@@ -312,8 +306,8 @@ relocate_code:
 	 */
 	move	t6, gp
 	sub	gp, CFG_MONITOR_BASE
-	add	gp, a2			/* gp now adjusted		*/
-	sub	t6, gp, t6		/* t6 <-- relocation offset	*/
+	add	gp, a2		/* gp now adjusted		*/
+	sub	t6, gp, t6	/* t6 <-- relocation offset	*/
 
 	/*
 	 * t0 = source address
@@ -329,7 +323,7 @@ relocate_code:
 	sw	t3, 0(t1)
 	addu	t0, 4
 	ble	t0, t2, 1b
-	addu	t1, 4			/* delay slot			*/
+	addu	t1, 4		/* delay slot			*/
 #endif
 
 	/* If caches were enabled, we would have to flush them here.
@@ -376,7 +370,8 @@ in_ram:
 	add	t2, t6
 
 	sub	t1, 4
-1:	addi	t1, 4
+1:
+	addi	t1, 4
 	bltl	t1, t2, 1b
 	sw	zero, 0(t1)	/* delay slot			*/
 
@@ -387,11 +382,10 @@ in_ram:
 
 	.end	relocate_code
 
-
 	/* Exception handlers.
 	 */
 romReserved:
-	b romReserved
+	b	romReserved
 
 romExcHandle:
-	b romExcHandle
+	b	romExcHandle
diff --git a/cpu/mpc512x/config.mk b/cpu/mpc512x/config.mk
index 3259d53a1..8a07c5a3b 100644
--- a/cpu/mpc512x/config.mk
+++ b/cpu/mpc512x/config.mk
@@ -19,7 +19,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
 			-ffixed-r2 -ffixed-r29 -msoft-float -mcpu=603e
diff --git a/cpu/mpc5xx/config.mk b/cpu/mpc5xx/config.mk
index e95b8a1a8..64cd60071 100644
--- a/cpu/mpc5xx/config.mk
+++ b/cpu/mpc5xx/config.mk
@@ -28,7 +28,7 @@
 #
 
 
-PLATFORM_RELFLAGS += 	-fPIC -ffixed-r14 -meabi -mrelocatable
+PLATFORM_RELFLAGS += 	-fPIC -ffixed-r14 -meabi
 
 PLATFORM_CPPFLAGS +=	-DCONFIG_5xx -ffixed-r2 -ffixed-r29 -mpowerpc -msoft-float
 
diff --git a/cpu/mpc5xx/u-boot.lds b/cpu/mpc5xx/u-boot.lds
index 10001b1c1..5b03fef66 100644
--- a/cpu/mpc5xx/u-boot.lds
+++ b/cpu/mpc5xx/u-boot.lds
@@ -59,6 +59,7 @@ SECTIONS
     cpu/mpc5xx/start.o	(.text)
 
     *(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;
diff --git a/cpu/mpc5xxx/config.mk b/cpu/mpc5xxx/config.mk
index 0e861c4a0..0df51babd 100644
--- a/cpu/mpc5xxx/config.mk
+++ b/cpu/mpc5xxx/config.mk
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 -ffixed-r29 \
 		     -mstring -mcpu=603e -mmultiple
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 7f16b92a6..e4d616822 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -35,6 +35,7 @@
 #if defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #include <libfdt_env.h>
+#include <fdt_support.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -114,42 +115,19 @@ unsigned long get_tbclk (void)
 /* ------------------------------------------------------------------------- */
 
 #ifdef CONFIG_OF_LIBFDT
-static void do_fixup(void *fdt, const char *node, const char *prop,
-		     const void *val, int len, int create)
-{
-#if defined(DEBUG)
-	int i;
-	debug("Updating property '%s/%s' = ", node, prop);
-	for (i = 0; i < len; i++)
-		debug(" %.2x", *(u8*)(val+i));
-	debug("\n");
-#endif
-	int rc = fdt_find_and_setprop(fdt, node, prop, val, len, create);
-	if (rc)
-		printf("Unable to update property %s:%s, err=%s\n",
-		       node, prop, fdt_strerror(rc));
-}
-
-static void do_fixup_u32(void *fdt, const char *node, const char *prop,
-			 u32 val, int create)
-{
-	val = cpu_to_fdt32(val);
-	do_fixup(fdt, node, prop, &val, sizeof(val), create);
-}
-
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 	int div = in_8((void*)CFG_MBAR + 0x204) & 0x0020 ? 8 : 4;
 	char * cpu_path = "/cpus/" OF_CPU;
 	char * eth_path = "/" OF_SOC "/ethernet@3000";
 
-	do_fixup_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
-	do_fixup_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
-	do_fixup_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1);
-	do_fixup_u32(blob, "/" OF_SOC, "system-frequency",
-			bd->bi_busfreq*div, 1);
-	do_fixup(blob, eth_path, "mac-address", bd->bi_enetaddr, 6, 0);
-	do_fixup(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0);
+	do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
+	do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
+	do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1);
+	do_fixup_by_path_u32(blob, "/" OF_SOC, "system-frequency",
+				bd->bi_busfreq*div, 1);
+	do_fixup_by_path(blob, eth_path, "mac-address", bd->bi_enetaddr, 6, 0);
+	do_fixup_by_path(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0);
 }
 #endif
diff --git a/cpu/mpc5xxx/u-boot-customlayout.lds b/cpu/mpc5xxx/u-boot-customlayout.lds
index 11079430d..123a14c5a 100644
--- a/cpu/mpc5xxx/u-boot-customlayout.lds
+++ b/cpu/mpc5xxx/u-boot-customlayout.lds
@@ -66,6 +66,7 @@ SECTIONS
     common/environment.o        (.ppcenv)
 
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/cpu/mpc5xxx/u-boot.lds b/cpu/mpc5xxx/u-boot.lds
index a28a3afc7..78818a49e 100644
--- a/cpu/mpc5xxx/u-boot.lds
+++ b/cpu/mpc5xxx/u-boot.lds
@@ -55,6 +55,7 @@ SECTIONS
   {
     cpu/mpc5xxx/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/cpu/mpc8220/config.mk b/cpu/mpc8220/config.mk
index c41cafe97..8e3ba5428 100644
--- a/cpu/mpc8220/config.mk
+++ b/cpu/mpc8220/config.mk
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 -ffixed-r29 \
 		     -mstring -mcpu=603e -mmultiple
diff --git a/cpu/mpc8220/u-boot.lds b/cpu/mpc8220/u-boot.lds
index a199a64f1..889bc77d2 100644
--- a/cpu/mpc8220/u-boot.lds
+++ b/cpu/mpc8220/u-boot.lds
@@ -55,6 +55,7 @@ SECTIONS
   {
     cpu/mpc8220/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/cpu/mpc824x/config.mk b/cpu/mpc824x/config.mk
index 17fdb21d3..66207f435 100644
--- a/cpu/mpc824x/config.mk
+++ b/cpu/mpc824x/config.mk
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing -mrelocatable
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -msoft-float
 
diff --git a/cpu/mpc824x/u-boot.lds b/cpu/mpc824x/u-boot.lds
index 8cbef4aed..c90d1e945 100644
--- a/cpu/mpc824x/u-boot.lds
+++ b/cpu/mpc824x/u-boot.lds
@@ -55,6 +55,7 @@ SECTIONS
   {
     cpu/mpc824x/start.o		(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/cpu/mpc8260/config.mk b/cpu/mpc8260/config.mk
index d401e4ca0..683b6fbf2 100644
--- a/cpu/mpc8260/config.mk
+++ b/cpu/mpc8260/config.mk
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
 
 PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 -ffixed-r29 \
 		     -mstring -mcpu=603e -mmultiple
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index c2b753d6b..55e61a188 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -50,6 +50,7 @@
 #if defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #include <libfdt_env.h>
+#include <fdt_support.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -300,35 +301,12 @@ void watchdog_reset (void)
 
 /* ------------------------------------------------------------------------- */
 #if defined(CONFIG_OF_LIBFDT)
-static void do_fixup(void *fdt, const char *node, const char *prop,
-			const void *val, int len, int create)
-{
-#if defined(DEBUG)
-	int i;
-	debug("Updating property '%s/%s' = ", node, prop);
-	for (i = 0; i < len; i++)
-		debug(" %.2x", *(u8*)(val+i));
-	debug("\n");
-#endif
-	int rc = fdt_find_and_setprop(fdt, node, prop, val, len, create);
-	if (rc)
-		printf("Unable to update property %s:%s, err=%s\n",
-			node, prop, fdt_strerror(rc));
-}
-
-static void do_fixup_u32(void *fdt, const char *node, const char *prop,
-			 u32 val, int create)
-{
-	val = cpu_to_fdt32(val);
-	do_fixup(fdt, node, prop, &val, sizeof(val), create);
-}
-
 void ft_cpu_setup (void *blob, bd_t *bd)
 {
 	char * cpu_path = "/cpus/" OF_CPU;
 
-	do_fixup_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
-	do_fixup_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
+	do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
+	do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
 }
 #endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/mpc8260/u-boot.lds b/cpu/mpc8260/u-boot.lds
index b8abc17d4..3e84f234d 100644
--- a/cpu/mpc8260/u-boot.lds
+++ b/cpu/mpc8260/u-boot.lds
@@ -55,6 +55,7 @@ SECTIONS
   {
     cpu/mpc8260/start.o		(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/cpu/mpc83xx/config.mk b/cpu/mpc83xx/config.mk
index 2ec395d4c..ecf8a60bb 100644
--- a/cpu/mpc83xx/config.mk
+++ b/cpu/mpc83xx/config.mk
@@ -20,7 +20,7 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC83XX -DCONFIG_E300 \
 			-ffixed-r2 -ffixed-r29 -msoft-float
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index e634f0a25..f1ea17d5a 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -35,6 +35,7 @@
 #include <ft_build.h>
 #elif defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
+#include <fdt_support.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -526,10 +527,9 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	int nodeoffset;
 	int err;
 	int j;
-	int tmp[2];
 
 	for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
-		nodeoffset = fdt_find_node_by_path(blob, fixup_props[j].node);
+		nodeoffset = fdt_path_offset(blob, fixup_props[j].node);
 		if (nodeoffset >= 0) {
 			err = fixup_props[j].set_fn(blob, nodeoffset,
 						    fixup_props[j].prop, bd);
@@ -543,21 +543,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 		}
 	}
 
-	/* update, or add and update /memory node */
-	nodeoffset = fdt_find_node_by_path(blob, "/memory");
-	if (nodeoffset < 0) {
-		nodeoffset = fdt_add_subnode(blob, 0, "memory");
-		if (nodeoffset < 0)
-			debug("failed to add /memory node: %s\n",
-			      fdt_strerror(nodeoffset));
-	}
-	if (nodeoffset >= 0) {
-		fdt_setprop(blob, nodeoffset, "device_type",
-			    "memory", sizeof("memory"));
-		tmp[0] = cpu_to_be32(bd->bi_memstart);
-		tmp[1] = cpu_to_be32(bd->bi_memsize);
-		fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
-	}
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #elif defined(CONFIG_OF_FLAT_TREE)
 void
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index 5675afe97..0defb0ec8 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -179,7 +179,7 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	if (pci_num_buses < 1)
 		return;
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
@@ -194,7 +194,7 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	if (pci_num_buses < 2)
 		return;
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds
index ca663bc87..937c87a27 100644
--- a/cpu/mpc83xx/u-boot.lds
+++ b/cpu/mpc83xx/u-boot.lds
@@ -52,6 +52,7 @@ SECTIONS
   {
     cpu/mpc83xx/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 32091fa4e..d179d701b 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -29,8 +29,10 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o resetvec.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o
+	  pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o \
+	  $(COBJS-y)
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c
index 3504d50ca..b0ecd2550 100644
--- a/cpu/mpc85xx/commproc.c
+++ b/cpu/mpc85xx/commproc.c
@@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
 void
 m8560_cpm_reset(void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	volatile ulong count;
 
 	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
@@ -50,11 +50,11 @@ m8560_cpm_reset(void)
 	/*
 	 * Reset CPM
 	 */
-	immr->im_cpm.im_cpm_cp.cpcr = CPM_CR_RST;
+	cpm->im_cpm_cp.cpcr = CPM_CR_RST;
 	count = 0;
 	do {			/* Spin until command processed		*/
 		__asm__ __volatile__ ("eieio");
-	} while ((immr->im_cpm.im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
+	} while ((cpm->im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
 }
 
 /* Allocate some memory from the dual ported ram.
@@ -64,7 +64,7 @@ m8560_cpm_reset(void)
 uint
 m8560_cpm_dpalloc(uint size, uint align)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	uint	retloc;
 	uint	align_mask, off;
 	uint	savebase;
@@ -86,7 +86,7 @@ m8560_cpm_dpalloc(uint size, uint align)
 	retloc = gd->dp_alloc_base;
 	gd->dp_alloc_base += size;
 
-	memset((void *)&(immr->im_cpm.im_dprambase[retloc]), 0, size);
+	memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
 
 	return(retloc);
 }
@@ -120,16 +120,16 @@ m8560_cpm_hostalloc(uint size, uint align)
 void
 m8560_cpm_setbrg(uint brg, uint rate)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	volatile uint	*bp;
 
 	/* This is good enough to get SMCs running.....
 	*/
 	if (brg < 4) {
-		bp = (uint *)&(immr->im_cpm.im_cpm_brg1.brgc1);
+		bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
 	}
 	else {
-		bp = (uint *)&(immr->im_cpm.im_cpm_brg2.brgc5);
+		bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
 		brg -= 4;
 	}
 	bp += brg;
@@ -142,16 +142,16 @@ m8560_cpm_setbrg(uint brg, uint rate)
 void
 m8560_cpm_fastbrg(uint brg, uint rate, int div16)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	volatile uint	*bp;
 
 	/* This is good enough to get SMCs running.....
 	*/
 	if (brg < 4) {
-		bp = (uint *)&(immr->im_cpm.im_cpm_brg1.brgc1);
+		bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
 	}
 	else {
-		bp = (uint *)&(immr->im_cpm.im_cpm_brg2.brgc5);
+		bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
 		brg -= 4;
 	}
 	bp += brg;
@@ -167,14 +167,14 @@ m8560_cpm_fastbrg(uint brg, uint rate, int div16)
 void
 m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	volatile uint	*bp;
 
 	if (brg < 4) {
-		bp = (uint *)&(immr->im_cpm.im_cpm_brg1.brgc1);
+		bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
 	}
 	else {
-		bp = (uint *)&(immr->im_cpm.im_cpm_brg2.brgc5);
+		bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
 		brg -= 4;
 	}
 	bp += brg;
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index bbc54448d..ac8b018b0 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -30,11 +30,6 @@
 #include <command.h>
 #include <asm/cache.h>
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-
 int checkcpu (void)
 {
 	sys_info_t sysinfo;
@@ -44,6 +39,8 @@ int checkcpu (void)
 	uint fam;
 	uint ver;
 	uint major, minor;
+	u32 ddr_ratio;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 
 	svr = get_svr();
 	ver = SVR_VER(svr);
@@ -107,14 +104,25 @@ int checkcpu (void)
 	puts("Clock Configuration:\n");
 	printf("       CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000);
 	printf("CCB:%4lu MHz,\n", sysinfo.freqSystemBus / 1000000);
-	printf("       DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
+
+	ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+	switch (ddr_ratio) {
+	case 0x0:
+		printf("       DDR:%4lu MHz, ", sysinfo.freqDDRBus / 2000000);
+		break;
+	case 0x7:
+		printf("       DDR:%4lu MHz (Synchronous), ", sysinfo.freqDDRBus / 2000000);
+		break;
+	default:
+		printf("       DDR:%4lu MHz (Asynchronous), ", sysinfo.freqDDRBus / 2000000);
+		break;
+	}
 
 #if defined(CFG_LBC_LCRR)
 	lcrr = CFG_LBC_LCRR;
 #else
 	{
-	    volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	    volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	    volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
 
 	    lcrr = lbc->lcrr;
 	}
@@ -214,8 +222,7 @@ reset_85xx_watchdog(void)
 
 #if defined(CONFIG_DDR_ECC)
 void dma_init(void) {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_dma_t *dma = &immap->im_dma;
+	volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
 
 	dma->satr0 = 0x02c40000;
 	dma->datr0 = 0x02c40000;
@@ -225,8 +232,7 @@ void dma_init(void) {
 }
 
 uint dma_check(void) {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_dma_t *dma = &immap->im_dma;
+	volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
 	volatile uint status = dma->sr0;
 
 	/* While the channel is busy, spin */
@@ -245,8 +251,7 @@ uint dma_check(void) {
 }
 
 int dma_xfer(void *dest, uint count, void *src) {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_dma_t *dma = &immap->im_dma;
+	volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
 
 	dma->dar0 = (uint) dest;
 	dma->sar0 = (uint) src;
@@ -258,94 +263,3 @@ int dma_xfer(void *dest, uint count, void *src) {
 	return dma_check();
 }
 #endif
-
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	ulong clock;
-	int len;
-
-	clock = bd->bi_busfreq;
-	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/qe@e0080000/" OF_CPU "/bus-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-#if defined(CONFIG_HAS_ETH0)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enetaddr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#if defined(CONFIG_HAS_ETH1)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet1addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#if defined(CONFIG_HAS_ETH2)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-#ifdef CONFIG_UEC_ETH
-	p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-#endif
-#endif
-
-#if defined(CONFIG_HAS_ETH3)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-#ifdef CONFIG_UEC_ETH
-	p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-#endif
-#endif
-
-}
-#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 79ad20c91..fdb9ecbd5 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -59,7 +59,7 @@ static void config_qe_ioports(void)
 #endif
 
 #ifdef CONFIG_CPM2
-static void config_8560_ioports (volatile immap_t * immr)
+void config_8560_ioports (volatile ccsr_cpm_t * cpm)
 {
 	int portnum;
 
@@ -99,7 +99,7 @@ static void config_8560_ioports (volatile immap_t * immr)
 		}
 
 		if (pmsk != 0) {
-			volatile ioport_t *iop = ioport_addr (immr, portnum);
+			volatile ioport_t *iop = ioport_addr (cpm, portnum);
 			uint tpmsk = ~pmsk;
 
 			/*
@@ -131,8 +131,7 @@ static void config_8560_ioports (volatile immap_t * immr)
 
 void cpu_init_f (void)
 {
-	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
+	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
 	extern void m8560_cpm_reset (void);
 
 	/* Pointer is writable since we allocated a register for it */
@@ -143,7 +142,7 @@ void cpu_init_f (void)
 
 
 #ifdef CONFIG_CPM2
-	config_8560_ioports(immap);
+	config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
 #endif
 
 	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
@@ -222,18 +221,15 @@ void cpu_init_f (void)
 
 int cpu_init_r(void)
 {
-#if defined(CONFIG_CLEAR_LAW0) || defined(CONFIG_L2_CACHE)
-	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
-#endif
 #ifdef CONFIG_CLEAR_LAW0
-	volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
 
 	/* clear alternate boot location LAW (used for sdram, or ddr bank) */
 	ecm->lawar0 = 0;
 #endif
 
 #if defined(CONFIG_L2_CACHE)
-	volatile ccsr_l2cache_t *l2cache = &immap->im_l2cache;
+	volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
 	volatile uint cache_ctl;
 	uint svr, ver;
 	uint l2srbar;
diff --git a/cpu/mpc85xx/ether_fcc.c b/cpu/mpc85xx/ether_fcc.c
index 5b23a80e1..bd62aab9f 100644
--- a/cpu/mpc85xx/ether_fcc.c
+++ b/cpu/mpc85xx/ether_fcc.c
@@ -230,8 +230,8 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 {
     struct ether_fcc_info_s * info = dev->priv;
     int i;
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_cpm_cp_t *cp = &(immr->im_cpm.im_cpm_cp);
+    volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+    volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
     fcc_enet_t *pram_ptr;
     unsigned long mem_addr;
 
@@ -242,35 +242,35 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
     /* 28.9 - (1-2): ioports have been set up already */
 
     /* 28.9 - (3): connect FCC's tx and rx clocks */
-    immr->im_cpm.im_cpm_mux.cmxuar = 0; /* ATM */
-    immr->im_cpm.im_cpm_mux.cmxfcr = (immr->im_cpm.im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
+    cpm->im_cpm_mux.cmxuar = 0; /* ATM */
+    cpm->im_cpm_mux.cmxfcr = (cpm->im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
 							info->cmxfcr_value;
 
     /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, set Mode Ethernet */
     if(info->ether_index == 0) {
-	immr->im_cpm.im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+	cpm->im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
     } else if (info->ether_index == 1) {
-	immr->im_cpm.im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+	cpm->im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
     } else if (info->ether_index == 2) {
-	immr->im_cpm.im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+	cpm->im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
     }
 
     /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */
     if(info->ether_index == 0) {
-	immr->im_cpm.im_cpm_fcc1.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+	cpm->im_cpm_fcc1.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
     } else if (info->ether_index == 1){
-	immr->im_cpm.im_cpm_fcc2.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+	cpm->im_cpm_fcc2.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
     } else if (info->ether_index == 2){
-	immr->im_cpm.im_cpm_fcc3.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+	cpm->im_cpm_fcc3.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
     }
 
     /* 28.9 - (6): FDSR: Ethernet Syn */
     if(info->ether_index == 0) {
-	immr->im_cpm.im_cpm_fcc1.fdsr = 0xD555;
+	cpm->im_cpm_fcc1.fdsr = 0xD555;
     } else if (info->ether_index == 1) {
-	immr->im_cpm.im_cpm_fcc2.fdsr = 0xD555;
+	cpm->im_cpm_fcc2.fdsr = 0xD555;
     } else if (info->ether_index == 2) {
-	immr->im_cpm.im_cpm_fcc3.fdsr = 0xD555;
+	cpm->im_cpm_fcc3.fdsr = 0xD555;
     }
 
     /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
@@ -296,7 +296,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
     rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
 
     /* 28.9 - (7): initialize parameter ram */
-    pram_ptr = (fcc_enet_t *)&(immr->im_cpm.im_dprambase[info->proff_enet]);
+    pram_ptr = (fcc_enet_t *)&(cpm->im_dprambase[info->proff_enet]);
 
     /* clear whole structure to make sure all reserved fields are zero */
     memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
@@ -385,14 +385,14 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
     /* 28.9 - (8)(9): clear out events in FCCE */
     /* 28.9 - (9): FCCM: mask all events */
     if(info->ether_index == 0) {
-	immr->im_cpm.im_cpm_fcc1.fcce = ~0x0;
-	immr->im_cpm.im_cpm_fcc1.fccm = 0;
+	cpm->im_cpm_fcc1.fcce = ~0x0;
+	cpm->im_cpm_fcc1.fccm = 0;
     } else if (info->ether_index == 1) {
-	immr->im_cpm.im_cpm_fcc2.fcce = ~0x0;
-	immr->im_cpm.im_cpm_fcc2.fccm = 0;
+	cpm->im_cpm_fcc2.fcce = ~0x0;
+	cpm->im_cpm_fcc2.fccm = 0;
     } else if (info->ether_index == 2) {
-	immr->im_cpm.im_cpm_fcc3.fcce = ~0x0;
-	immr->im_cpm.im_cpm_fcc3.fccm = 0;
+	cpm->im_cpm_fcc3.fcce = ~0x0;
+	cpm->im_cpm_fcc3.fccm = 0;
     }
 
     /* 28.9 - (10-12): we don't use ethernet interrupts */
@@ -413,11 +413,11 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 
     /* 28.9 - (14): enable tx/rx in gfmr */
     if(info->ether_index == 0) {
-	immr->im_cpm.im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+	cpm->im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
     } else if (info->ether_index == 1) {
-	immr->im_cpm.im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+	cpm->im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
     } else if (info->ether_index == 2) {
-	immr->im_cpm.im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+	cpm->im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
     }
 
     return 1;
@@ -426,15 +426,15 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 static void fec_halt(struct eth_device* dev)
 {
     struct ether_fcc_info_s * info = dev->priv;
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 
     /* write GFMR: disable tx/rx */
     if(info->ether_index == 0) {
-	immr->im_cpm.im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+	cpm->im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
     } else if(info->ether_index == 1) {
-	immr->im_cpm.im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+	cpm->im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
     } else if(info->ether_index == 2) {
-	immr->im_cpm.im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+	cpm->im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
     }
 }
 
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
new file mode 100644
index 000000000..737a6c485
--- /dev/null
+++ b/cpu/mpc85xx/fdt.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+	fdt_fixup_ethernet(blob, bd);
+#endif
+
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+		"timebase-frequency", bd->bi_busfreq / 8, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+		"bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+		"clock-frequency", bd->bi_intfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+		"bus-frequency", bd->bi_busfreq, 1);
+#ifdef CONFIG_QE
+	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+		"bus-frequency", bd->bi_busfreq, 1);
+#endif
+
+#ifdef CFG_NS16550
+	do_fixup_by_compat_u32(blob, "ns16550",
+		"clock-frequency", bd->bi_busfreq, 1);
+#endif
+
+#ifdef CONFIG_CPM2
+	do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
+		"current-speed", bd->bi_baudrate, 1);
+
+	do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+		"clock-frequency", bd->bi_brgfreq, 1);
+#endif
+
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
diff --git a/cpu/mpc85xx/interrupts.c b/cpu/mpc85xx/interrupts.c
index bf737d622..18e5377b3 100644
--- a/cpu/mpc85xx/interrupts.c
+++ b/cpu/mpc85xx/interrupts.c
@@ -80,19 +80,17 @@ int disable_interrupts (void)
 
 int interrupt_init (void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
 
-	immr->im_pic.gcr = MPC85xx_PICGCR_RST;
-	while (immr->im_pic.gcr & MPC85xx_PICGCR_RST);
-	immr->im_pic.gcr = MPC85xx_PICGCR_M;
+	pic->gcr = MPC85xx_PICGCR_RST;
+	while (pic->gcr & MPC85xx_PICGCR_RST);
+	pic->gcr = MPC85xx_PICGCR_M;
 	decrementer_count = get_tbclk() / CFG_HZ;
 	mtspr(SPRN_TCR, TCR_PIE);
 	set_dec (decrementer_count);
 	set_msr (get_msr () | MSR_EE);
 
 #ifdef CONFIG_INTERRUPTS
-	volatile ccsr_pic_t *pic = &immr->im_pic;
-
 	pic->iivpr1 = 0x810002;	/* 50220 enable ecm interrupts */
 	debug("iivpr1@%x = %x\n",&pic->iivpr1, pic->iivpr1);
 
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index db09e45fb..a5060cdec 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -29,10 +29,6 @@
 #include <asm/cpm_85xx.h>
 #include <pci.h>
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
 #if defined(CONFIG_PCI)
 
 static struct pci_controller *pci_hose;
@@ -43,12 +39,11 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	u16 reg16;
 	u32 dev;
 
-	volatile immap_t    *immap = (immap_t *)CFG_CCSRBAR;
-	volatile ccsr_pcix_t *pcix = &immap->im_pcix;
+	volatile ccsr_pcix_t *pcix = (void *)(CFG_MPC85xx_PCIX_ADDR);
 #ifdef CONFIG_MPC85XX_PCI2
-	volatile ccsr_pcix_t *pcix2 = &immap->im_pcix2;
+	volatile ccsr_pcix_t *pcix2 = (void *)(CFG_MPC85xx_PCIX2_ADDR);
 #endif
-	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	struct pci_controller * hose;
 
 	pci_hose = board_hose;
@@ -216,27 +211,4 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	hose->last_busno = pci_hose_scan(hose);
 #endif
 }
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = pci_hose[0].first_busno;
-		p[1] = pci_hose[0].last_busno;
-	}
-
-#ifdef CONFIG_MPC85XX_PCI2
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = pci_hose[1].first_busno;
-		p[1] = pci_hose[1].last_busno;
-	}
-#endif
-}
-#endif /* CONFIG_OF_FLAT_TREE */
 #endif /* CONFIG_PCI */
diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c
index 8878bc531..98075bbe5 100644
--- a/cpu/mpc85xx/qe_io.c
+++ b/cpu/mpc85xx/qe_io.c
@@ -34,9 +34,9 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 	u32			pin_2bit_assign;
 	u32			pin_1bit_mask;
 	u32			tmp_val;
-	volatile immap_t	*im = (volatile immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t 	*gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	volatile par_io_t	*par_io = (volatile par_io_t *)
-						&(im->im_gur.qe_par_io);
+						&(gur->qe_par_io);
 
 	/* Caculate pin location and 2bit mask and dir */
 	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c
index 4e925f8be..7ee3cc823 100644
--- a/cpu/mpc85xx/serial_scc.c
+++ b/cpu/mpc85xx/serial_scc.c
@@ -88,17 +88,17 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int serial_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	volatile ccsr_cpm_scc_t *sp;
 	volatile scc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
-	volatile ccsr_cpm_cp_t *cp = &(im->im_cpm.im_cpm_cp);
+	volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
 	uint	dpaddr;
 
 	/* initialize pointers to SCC */
 
-	sp = (ccsr_cpm_scc_t *) &(im->im_cpm.im_cpm_scc[SCC_INDEX]);
-	up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
+	sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
+	up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
 
 	/* Disable transmitter/receiver.
 	*/
@@ -107,8 +107,8 @@ int serial_init (void)
 	/* put the SCC channel into NMSI (non multiplexd serial interface)
 	 * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
 	 */
-	im->im_cpm.im_cpm_mux.cmxscr = \
-		(im->im_cpm.im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
+	cpm->im_cpm_mux.cmxscr = \
+		(cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
 
 	/* Set up the baud rate generator.
 	*/
@@ -123,7 +123,7 @@ int serial_init (void)
 	/* Set the physical address of the host memory buffers in
 	 * the buffer descriptors.
 	 */
-	rbdf = (cbd_t *)&(im->im_cpm.im_dprambase[dpaddr]);
+	rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
 	rbdf->cbd_bufaddr = (uint) (rbdf+2);
 	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
 	tbdf = rbdf + 1;
@@ -201,14 +201,13 @@ serial_putc(const char c)
 {
 	volatile scc_uart_t	*up;
 	volatile cbd_t		*tbdf;
-	volatile immap_t	*im;
+	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 
 	if (c == '\n')
 		serial_putc ('\r');
 
-	im = (immap_t *)CFG_IMMR;
-	up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
-	tbdf = (cbd_t *)&(im->im_cpm.im_dprambase[up->scc_genscc.scc_tbase]);
+	up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+	tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
 
 	/* Wait for last character to go.
 	 */
@@ -235,12 +234,11 @@ serial_getc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile scc_uart_t	*up;
-	volatile immap_t	*im;
+	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	unsigned char		c;
 
-	im = (immap_t *)CFG_IMMR;
-	up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
-	rbdf = (cbd_t *)&(im->im_cpm.im_dprambase[up->scc_genscc.scc_rbase]);
+	up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+	rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
 
 	/* Wait for character to show up.
 	 */
@@ -260,11 +258,10 @@ serial_tstc()
 {
 	volatile cbd_t		*rbdf;
 	volatile scc_uart_t	*up;
-	volatile immap_t	*im;
+	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 
-	im = (immap_t *)CFG_IMMR;
-	up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
-	rbdf = (cbd_t *)&(im->im_cpm.im_dprambase[up->scc_genscc.scc_rbase]);
+	up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+	rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
 
 	return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
 }
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 5dc223a53..553f736a5 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -53,8 +53,8 @@ picos_to_clk(int picos)
 {
 	int clks;
 
-	clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
-	if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
+	clks = picos / (2000000000 / (get_ddr_freq(0) / 1000));
+	if (picos % (2000000000 / (get_ddr_freq(0) / 1000)) != 0) {
 		clks++;
 	}
 
@@ -171,8 +171,7 @@ unsigned int determine_refresh_rate(unsigned int spd_refresh)
 long int
 spd_sdram(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr = &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
 	spd_eeprom_t spd;
 	unsigned int n_ranks;
 	unsigned int rank_density;
@@ -309,7 +308,7 @@ spd_sdram(void)
 	if ((SVR_VER(get_svr()) == SVR_8548_E) &&
 			(SVR_MJREV(get_svr()) == 1) &&
 			(spd.mem_type == SPD_MEMTYPE_DDR2)) {
-		volatile ccsr_gur_t *gur = &immap->im_gur;
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 		gur->ddrioovcr = (0x80000000	/* Enable */
 				  | 0x10000000);/* VSEL to 1.8V */
 	}
@@ -422,7 +421,7 @@ spd_sdram(void)
 	 * Adjust the CAS Latency to allow for bus speeds that
 	 * are slower than the DDR module.
 	 */
-	busfreq = get_bus_freq(0) / 1000000;	/* MHz */
+	busfreq = get_ddr_freq(0) / 1000000;	/* MHz */
 
 	effective_data_rate = max_data_rate;
 	if (busfreq < 90) {
@@ -1023,8 +1022,7 @@ spd_sdram(void)
 static unsigned int
 setup_laws_and_tlbs(unsigned int memsize)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
 	unsigned int tlb_size;
 	unsigned int law_size;
 	unsigned int ram_tlb_index;
@@ -1130,8 +1128,7 @@ ddr_enable_ecc(unsigned int dram_size)
 {
 	uint *p = 0;
 	uint i = 0;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
 
 	dma_init();
 
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 12359a2d6..27de37afa 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -35,8 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void get_sys_info (sys_info_t * sysInfo)
 {
-	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
 	uint plat_ratio,e500_ratio,half_freqSystemBus;
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
@@ -49,6 +48,15 @@ void get_sys_info (sys_info_t * sysInfo)
 	 * overflow for processor speeds above 2GHz */
 	half_freqSystemBus = sysInfo->freqSystemBus/2;
 	sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
+	sysInfo->freqDDRBus = sysInfo->freqSystemBus;
+
+#ifdef CONFIG_DDR_CLK_FREQ
+	{
+		u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+		if (ddr_ratio != 0x7)
+			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+	}
+#endif
 }
 
 
@@ -56,12 +64,12 @@ int get_clocks (void)
 {
 	sys_info_t sys_info;
 #if defined(CONFIG_CPM2)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
 	uint sccr, dfbrg;
 
 	/* set VCO = 4 * BRG */
-	immap->im_cpm.im_cpm_intctl.sccr &= 0xfffffffc;
-	sccr = immap->im_cpm.im_cpm_intctl.sccr;
+	cpm->im_cpm_intctl.sccr &= 0xfffffffc;
+	sccr = cpm->im_cpm_intctl.sccr;
 	dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
 #endif
 	get_sys_info (&sys_info);
@@ -94,3 +102,19 @@ ulong get_bus_freq (ulong dummy)
 
 	return val;
 }
+
+/********************************************
+ * get_ddr_freq
+ * return ddr bus freq in Hz
+ *********************************************/
+ulong get_ddr_freq (ulong dummy)
+{
+	ulong val;
+
+	sys_info_t sys_info;
+
+	get_sys_info (&sys_info);
+	val = sys_info.freqDDRBus;
+
+	return val;
+}
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index efc80c7ae..2381fb065 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -288,8 +288,8 @@ UnknownException(struct pt_regs *regs)
 void
 ExtIntException(struct pt_regs *regs)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_pic_t *pic = &immap->im_pic;
+	volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
+
 	uint vect;
 
 #if defined(CONFIG_CMD_KGDB)
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index 9456471e8..11354d38d 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -41,6 +41,8 @@ checkcpu(void)
 	uint major, minor;
 	uint lcrr;		/* local bus clock ratio register */
 	uint clkdiv;		/* clock divider portion of lcrr */
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
 
 	puts("Freescale PowerPC\n");
 
@@ -54,8 +56,14 @@ checkcpu(void)
 
 	switch (ver) {
 	case PVR_VER(PVR_86xx):
-		puts("E600");
-		break;
+	{
+		uint msscr0 = mfspr(MSSCR0);
+		printf("E600 Core %d", (msscr0 & 0x20) ? 1 : 0 );
+		if (gur->pordevsr & MPC86xx_PORDEVSR_CORE1TE)
+			puts("\n    Core1Translation Enabled");
+		debug(" (MSSCR0=%x, PORDEVSR=%x)", msscr0, gur->pordevsr);
+	}
+	break;
 	default:
 		puts("Unknown");
 		break;
@@ -76,6 +84,9 @@ checkcpu(void)
 		puts("8641");
 	    }
 	    break;
+	case SVR_8610:
+		puts("8610");
+		break;
 	default:
 		puts("Unknown");
 		break;
@@ -120,7 +131,7 @@ checkcpu(void)
 static inline void
 soft_restart(unsigned long addr)
 {
-#ifndef CONFIG_MPC8641HPCN
+#if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD)
 
 	/*
 	 * SRR0 has system reset vector, SRR1 has default MSR value
@@ -148,7 +159,7 @@ soft_restart(unsigned long addr)
 void
 do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#ifndef CONFIG_MPC8641HPCN
+#if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD)
 
 #ifdef CFG_RESET_ADDRESS
 	ulong addr = CFG_RESET_ADDRESS;
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 059097f51..265e033fb 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -1114,8 +1114,10 @@ spd_sdram(void)
 	int memsize_ddr1 = 0;
 	unsigned int law_size_ddr1;
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
 	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+#ifdef CONFIG_DDR_INTERLEAVE
+	volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
+#endif
 
 #if (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	int memsize_ddr2_dimm1 = 0;
@@ -1270,10 +1272,12 @@ spd_sdram(void)
 		debug("\nDDR: LAWBAR8=0x%08x\n", mcm->lawbar8);
 		debug("DDR: LAWAR8=0x%08x\n", mcm->lawar8);
 	}
+
+	debug("\nMemory size of DDR2 = 0x%08lx\n", memsize_ddr2);
+
 #endif /* CONFIG_NUM_DDR_CONTROLLERS > 1 */
 
-	debug("\nMemory sizes are DDR1 = 0x%08lx, DDR2 = 0x%08lx\n",
-	      memsize_ddr1, memsize_ddr2);
+	debug("\nMemory size of DDR1 = 0x%08lx\n", memsize_ddr1);
 
 	/*
 	 * If neither DDR controller is enabled return 0.
diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c
index 23161ca8c..4f7e8f17d 100644
--- a/cpu/mpc86xx/speed.c
+++ b/cpu/mpc86xx/speed.c
@@ -31,6 +31,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* used in some defintiions of CONFIG_SYS_CLK_FREQ */
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+
 void get_sys_info(sys_info_t *sysInfo)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 101d5f9cb..11b089330 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -259,11 +259,8 @@ int get_clocks_866 (void)
 	 */
 	sccr_reg = immr->im_clkrst.car_sccr;
 	sccr_reg &= ~SCCR_EBDF11;
-#if defined(CONFIG_TQM885D)
-	if (gd->cpu_clk <= 80000000) {
-#else
+
 	if (gd->cpu_clk <= 66000000) {
-#endif
 		sccr_reg |= SCCR_EBDF00;	/* bus division factor = 1 */
 		gd->bus_clk = gd->cpu_clk;
 	} else {
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
index 19c4f764e..42fd7fb87 100644
--- a/cpu/ppc4xx/40x_spd_sdram.c
+++ b/cpu/ppc4xx/40x_spd_sdram.c
@@ -148,7 +148,7 @@ long int spd_sdram(int(read_spd)(uint addr))
 	int t_rc;
 	int min_cas;
 
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 	unsigned long bus_period_x_10;
 
 	/*
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 4a4c6f29e..b9cf5cbfc 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -251,10 +251,10 @@ void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))
  * memory.
  *
  * If at some time this restriction doesn't apply anymore, just define
- * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
  * everything correctly.
  */
-#ifdef CFG_ENABLE_SDRAM_CACHE
+#ifdef CONFIG_4xx_DCACHE
 #define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
 #else
 #define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
@@ -345,7 +345,7 @@ long int spd_sdram(void) {
 	 */
 	check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
 	/*
 	 * Soft-reset SDRAM controller.
 	 */
@@ -645,7 +645,7 @@ static void program_rtr(unsigned long *dimm_populated,
 	unsigned char refresh_rate_type;
 	unsigned long refresh_interval;
 	unsigned long sdram_rtr;
-	PPC440_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	/*
 	 * get the board info
@@ -721,7 +721,7 @@ static void program_tr0(unsigned long *dimm_populated,
 	unsigned long tcyc_2_0_ns_x_10;
 	unsigned long tcyc_reg;
 	unsigned long bus_period_x_10;
-	PPC440_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 	unsigned long residue;
 
 	/*
@@ -1065,7 +1065,7 @@ static void program_tr1(void)
 	unsigned char window_found;
 	unsigned char fail_found;
 	unsigned char pass_found;
-	PPC440_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	/*
 	 * get the board info
@@ -1197,9 +1197,6 @@ static void program_tr1(void)
 	}
 
 	rdclt_average = ((max_start + max_end) >> 1);
-	if (rdclt_average >= 0x60)
-		while (1)
-			;
 
 	if (rdclt_average < 0) {
 		rdclt_average = 0;
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 67ba5bdef..e19929437 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -120,10 +120,10 @@
  * memory.
  *
  * If at some time this restriction doesn't apply anymore, just define
- * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
  * everything correctly.
  */
-#ifdef CFG_ENABLE_SDRAM_CACHE
+#ifdef CONFIG_4xx_DCACHE
 #define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
 #else
 #define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
@@ -623,7 +623,7 @@ static void get_spd_info(unsigned long *dimm_populated,
 
 void board_add_ram_info(int use_default)
 {
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 	u32 val;
 
 	if (is_ecc_enabled())
@@ -741,7 +741,7 @@ static void check_frequency(unsigned long *dimm_populated,
 	unsigned long calc_cycle_time;
 	unsigned long sdram_freq;
 	unsigned long sdr_ddrpll;
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 
 	/*------------------------------------------------------------------
 	 * Get the board configuration info.
@@ -1353,7 +1353,7 @@ static void program_mode(unsigned long *dimm_populated,
 	unsigned long max_4_0_tcyc_ns_x_100;
 	unsigned long max_5_0_tcyc_ns_x_100;
 	unsigned long cycle_time_ns_x_100[3];
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 	unsigned char cas_2_0_available;
 	unsigned char cas_2_5_available;
 	unsigned char cas_3_0_available;
@@ -1640,7 +1640,7 @@ static void program_rtr(unsigned long *dimm_populated,
 			unsigned char *iic0_dimm_addr,
 			unsigned long num_dimm_banks)
 {
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 	unsigned long max_refresh_rate;
 	unsigned long dimm_num;
 	unsigned long refresh_rate_type;
@@ -1737,7 +1737,7 @@ static void program_tr(unsigned long *dimm_populated,
 	unsigned long sdram_freq;
 	unsigned long sdr_ddrpll;
 
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 
 	/*------------------------------------------------------------------
 	 * Get the board configuration info.
@@ -2048,14 +2048,10 @@ static void program_bxcf(unsigned long *dimm_populated,
 	/*------------------------------------------------------------------
 	 * Set the BxCF regs.  First, wipe out the bank config registers.
 	 *-----------------------------------------------------------------*/
-	mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF);
-	mtdcr(SDRAMC_CFGDATA, 0x00000000);
-	mtdcr(SDRAMC_CFGADDR, SDRAM_MB1CF);
-	mtdcr(SDRAMC_CFGDATA, 0x00000000);
-	mtdcr(SDRAMC_CFGADDR, SDRAM_MB2CF);
-	mtdcr(SDRAMC_CFGDATA, 0x00000000);
-	mtdcr(SDRAMC_CFGADDR, SDRAM_MB3CF);
-	mtdcr(SDRAMC_CFGDATA, 0x00000000);
+	mtsdram(SDRAM_MB0CF, 0x00000000);
+	mtsdram(SDRAM_MB1CF, 0x00000000);
+	mtsdram(SDRAM_MB2CF, 0x00000000);
+	mtsdram(SDRAM_MB3CF, 0x00000000);
 
 	mode = SDRAM_BXCF_M_BE_ENABLE;
 
@@ -2107,8 +2103,9 @@ static void program_bxcf(unsigned long *dimm_populated,
 				bank_0_populated = 1;
 
 			for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
-				mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF + ((dimm_num + bank_0_populated + ind_rank) << 2));
-				mtdcr(SDRAMC_CFGDATA, mode);
+				mtsdram(SDRAM_MB0CF +
+					((dimm_num + bank_0_populated + ind_rank) << 2),
+					mode);
 			}
 		}
 	}
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 71a9e372d..bfe0864d1 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -81,6 +81,9 @@
 #include <common.h>
 #include <net.h>
 #include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
 #include <commproc.h>
 #include <ppc4xx.h>
 #include <ppc4xx_enet.h>
@@ -105,7 +108,7 @@
 #endif
 
 #define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */
-#define PHY_AUTONEGOTIATE_TIMEOUT 4000	/* 4000 ms autonegotiate timeout */
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000	/* 5000 ms autonegotiate timeout */
 
 /* Ethernet Transmit and Receive Buffers */
 /* AS.HARNOIS
@@ -133,13 +136,15 @@
 #define BI_PHYMODE_GMII  3
 #define BI_PHYMODE_RTBI  4
 #define BI_PHYMODE_TBI   5
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define BI_PHYMODE_SMII  6
 #define BI_PHYMODE_MII   7
 #endif
 
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || \
-	defined(CONFIG_440GRX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define SDR0_MFR_ETH_CLK_SEL_V(n)	((0x01<<27) / (n+1))
 #endif
 
@@ -156,7 +161,14 @@ struct eth_device *emac0_dev = NULL;
 /*
  * Get count of EMAC devices (doesn't have to be the max. possible number
  * supported by the cpu)
+ *
+ * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
+ * EMAC count is possible. As it is needed for the Kilauea/Haleakala
+ * 405EX/405EXr eval board, using the same binary.
  */
+#if defined(CONFIG_BOARD_EMAC_COUNT)
+#define LAST_EMAC_NUM	board_emac_count()
+#else /* CONFIG_BOARD_EMAC_COUNT */
 #if defined(CONFIG_HAS_ETH3)
 #define LAST_EMAC_NUM	4
 #elif defined(CONFIG_HAS_ETH2)
@@ -166,12 +178,23 @@ struct eth_device *emac0_dev = NULL;
 #else
 #define LAST_EMAC_NUM	1
 #endif
+#endif /* CONFIG_BOARD_EMAC_COUNT */
 
 /* normal boards start with EMAC0 */
 #if !defined(CONFIG_EMAC_NR_START)
 #define CONFIG_EMAC_NR_START	0
 #endif
 
+#if defined(CONFIG_405EX) || defined(CONFIG_440EPX)
+#define ETH_IRQ_NUM(dev)	(VECNUM_ETH0 + ((dev)))
+#else
+#define ETH_IRQ_NUM(dev)	(VECNUM_ETH0 + ((dev) * 2))
+#endif
+
+#define MAL_RX_DESC_SIZE	2048
+#define MAL_TX_DESC_SIZE	2048
+#define MAL_ALLOC_SIZE		(MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE)
+
 /*-----------------------------------------------------------------------------+
  * Prototypes and externals.
  *-----------------------------------------------------------------------------*/
@@ -189,6 +212,8 @@ extern int emac4xx_miiphy_read (char *devname, unsigned char addr,
 extern int emac4xx_miiphy_write (char *devname, unsigned char addr,
 		unsigned char reg, unsigned short value);
 
+int board_emac_count(void);
+
 /*-----------------------------------------------------------------------------+
 | ppc_4xx_eth_halt
 | Disable MAL channel, and EMACn
@@ -197,11 +222,13 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 {
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 	uint32_t failsafe = 10000;
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	unsigned long mfr;
 #endif
 
-	out32 (EMAC_IER + hw_p->hw_addr, 0x00000000);	/* disable emac interrupts */
+	out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000);	/* disable emac interrupts */
 
 	/* 1st reset MAL channel */
 	/* Note: writing a 0 to a channel has no effect */
@@ -221,16 +248,20 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 	}
 
 	/* EMAC RESET */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	/* provide clocks for EMAC internal loopback  */
 	mfsdr (sdr_mfr, mfr);
 	mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
 	mtsdr(sdr_mfr, mfr);
 #endif
 
-	out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+	out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
 
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	/* remove clocks for EMAC internal loopback  */
 	mfsdr (sdr_mfr, mfr);
 	mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
@@ -329,8 +360,8 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	/* Ensure we setup mdio for this devnum and ONLY this devnum */
 	zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
 
-	out32 (ZMII_FER, zmiifer);
-	out32 (RGMII_FER, rmiifer);
+	out_be32((void *)ZMII_FER, zmiifer);
+	out_be32((void *)RGMII_FER, rmiifer);
 
 	return ((int)pfc1);
 }
@@ -348,31 +379,31 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	switch (pfc1) {
 	case SDR0_PFC1_SELECT_CONFIG_2:
 		/* 1 x GMII port */
-		out32 (ZMII_FER, 0x00);
-		out32 (RGMII_FER, 0x00000037);
+		out_be32((void *)ZMII_FER, 0x00);
+		out_be32((void *)RGMII_FER, 0x00000037);
 		bis->bi_phymode[0] = BI_PHYMODE_GMII;
 		bis->bi_phymode[1] = BI_PHYMODE_NONE;
 		break;
 	case SDR0_PFC1_SELECT_CONFIG_4:
 		/* 2 x RGMII ports */
-		out32 (ZMII_FER, 0x00);
-		out32 (RGMII_FER, 0x00000055);
+		out_be32((void *)ZMII_FER, 0x00);
+		out_be32((void *)RGMII_FER, 0x00000055);
 		bis->bi_phymode[0] = BI_PHYMODE_RGMII;
 		bis->bi_phymode[1] = BI_PHYMODE_RGMII;
 		break;
 	case SDR0_PFC1_SELECT_CONFIG_6:
 		/* 2 x SMII ports */
-		out32 (ZMII_FER,
-		       ((ZMII_FER_SMII) << ZMII_FER_V(0)) |
-		       ((ZMII_FER_SMII) << ZMII_FER_V(1)));
-		out32 (RGMII_FER, 0x00000000);
+		out_be32((void *)ZMII_FER,
+			 ((ZMII_FER_SMII) << ZMII_FER_V(0)) |
+			 ((ZMII_FER_SMII) << ZMII_FER_V(1)));
+		out_be32((void *)RGMII_FER, 0x00000000);
 		bis->bi_phymode[0] = BI_PHYMODE_SMII;
 		bis->bi_phymode[1] = BI_PHYMODE_SMII;
 		break;
 	case SDR0_PFC1_SELECT_CONFIG_1_2:
 		/* only 1 x MII supported */
-		out32 (ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0));
-		out32 (RGMII_FER, 0x00000000);
+		out_be32((void *)ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0));
+		out_be32((void *)RGMII_FER, 0x00000000);
 		bis->bi_phymode[0] = BI_PHYMODE_MII;
 		bis->bi_phymode[1] = BI_PHYMODE_NONE;
 		break;
@@ -381,17 +412,55 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	}
 
 	/* Ensure we setup mdio for this devnum and ONLY this devnum */
-	zmiifer = in32 (ZMII_FER);
+	zmiifer = in_be32((void *)ZMII_FER);
 	zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
-	out32 (ZMII_FER, zmiifer);
+	out_be32((void *)ZMII_FER, zmiifer);
 
 	return ((int)0x0);
 }
 #endif	/* CONFIG_440EPX */
 
+#if defined(CONFIG_405EX)
+int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
+{
+	u32 gmiifer = 0;
+
+	/*
+	 * Right now only 2*RGMII is supported. Please extend when needed.
+	 * sr - 2007-09-19
+	 */
+	switch (1) {
+	case 1:
+		/* 2 x RGMII ports */
+		out_be32((void *)RGMII_FER, 0x00000055);
+		bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+		bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+		break;
+	case 2:
+		/* 2 x SMII ports */
+		break;
+	default:
+		break;
+	}
+
+	/* Ensure we setup mdio for this devnum and ONLY this devnum */
+	gmiifer = in_be32((void *)RGMII_FER);
+	gmiifer |= (1 << (19-devnum));
+	out_be32((void *)RGMII_FER, gmiifer);
+
+	return ((int)0x0);
+}
+#endif  /* CONFIG_405EX */
+
+static inline void *malloc_aligned(u32 size, u32 align)
+{
+	return (void *)(((u32)malloc(size + align) + align - 1) &
+			~(align - 1));
+}
+
 static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 {
-	int i, j;
+	int i;
 	unsigned long reg = 0;
 	unsigned long msr;
 	unsigned long speed;
@@ -402,18 +471,22 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	unsigned short reg_short;
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 	sys_info_t sysinfo;
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	int ethgroup = -1;
 #endif
 #endif
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 	unsigned long mfr;
 #endif
-
+	u32 bd_cached;
+	u32 bd_uncached = 0;
 
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 
@@ -426,7 +499,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 	/* Need to get the OPB frequency so we can access the PHY */
 	get_sys_info (&sysinfo);
 #endif
@@ -476,53 +550,57 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	/* NOTE: Therefore, disable all other EMACS, since we handle */
 	/* NOTE: only one emac at a time */
 	reg = 0;
-	out32 (ZMII_FER, 0);
+	out_be32((void *)ZMII_FER, 0);
 	udelay (100);
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
+	out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
 #elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
 #elif defined(CONFIG_440GP)
 	/* set RMII mode */
-	out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
+	out_be32((void *)ZMII_FER, ZMII_RMII | ZMII_MDI0);
 #else
 	if ((devnum == 0) || (devnum == 1)) {
-		out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
+		out_be32((void *)ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
 	} else { /* ((devnum == 2) || (devnum == 3)) */
-		out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
-		out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
-				   (RGMII_FER_RGMII << RGMII_FER_V (3))));
+		out_be32((void *)ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
+		out_be32((void *)RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
+					     (RGMII_FER_RGMII << RGMII_FER_V (3))));
 	}
 #endif
 
-	out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
+	out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
 #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
+#if defined(CONFIG_405EX)
+	ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
+#endif
 
 	__asm__ volatile ("eieio");
 
 	/* reset emac so we have access to the phy */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	/* provide clocks for EMAC internal loopback  */
 	mfsdr (sdr_mfr, mfr);
 	mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
 	mtsdr(sdr_mfr, mfr);
 #endif
 
-	out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
-	__asm__ volatile ("eieio");
+	out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
 
 	failsafe = 1000;
-	while ((in32 (EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) {
+	while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) {
 		udelay (1000);
 		failsafe--;
 	}
 	if (failsafe <= 0)
 		printf("\nProblem resetting EMAC!\n");
 
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	/* remove clocks for EMAC internal loopback  */
 	mfsdr (sdr_mfr, mfr);
 	mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
@@ -531,7 +609,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 	/* Whack the M1 register */
 	mode_reg = 0x0;
 	mode_reg &= ~0x00000038;
@@ -545,7 +624,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	else
 		mode_reg |= EMAC_M1_OBCI_GT100;
 
-	out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
+	out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
 
 	/* wait for PHY to complete auto negotiation */
@@ -591,7 +670,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 
 #if defined(CONFIG_CIS8201_PHY)
 		/*
@@ -702,11 +782,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 #endif
 
 	/* Set ZMII/RGMII speed according to the phy link speed */
-	reg = in32 (ZMII_SSR);
+	reg = in_be32((void *)ZMII_SSR);
 	if ( (speed == 100) || (speed == 1000) )
-		out32 (ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum)));
+		out_be32((void *)ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum)));
 	else
-		out32 (ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
+		out_be32((void *)ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
 
 	if ((devnum == 2) || (devnum == 3)) {
 		if (speed == 1000)
@@ -719,11 +799,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			printf("Error in RGMII Speed\n");
 			return -1;
 		}
-		out32 (RGMII_SSR, reg);
+		out_be32((void *)RGMII_SSR, reg);
 	}
 #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
 
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	if (speed == 1000)
 		reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
 	else if (speed == 100)
@@ -734,13 +815,14 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		printf("Error in RGMII Speed\n");
 		return -1;
 	}
-	out32 (RGMII_SSR, reg);
+	out_be32((void *)RGMII_SSR, reg);
 #endif
 
 	/* set the Mal configuration reg */
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
 	       MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
 #else
@@ -751,91 +833,58 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	}
 #endif
 
-	/* Free "old" buffers */
-	if (hw_p->alloc_tx_buf)
-		free (hw_p->alloc_tx_buf);
-	if (hw_p->alloc_rx_buf)
-		free (hw_p->alloc_rx_buf);
-
 	/*
 	 * Malloc MAL buffer desciptors, make sure they are
 	 * aligned on cache line boundary size
 	 * (401/403/IOP480 = 16, 405 = 32)
 	 * and doesn't cross cache block boundaries.
 	 */
-	hw_p->alloc_tx_buf =
-		(mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_TX_BUFF) +
-				       ((2 * CFG_CACHELINE_SIZE) - 2));
-	if (NULL == hw_p->alloc_tx_buf)
-		return -1;
-	if (((int) hw_p->alloc_tx_buf & CACHELINE_MASK) != 0) {
-		hw_p->tx =
-			(mal_desc_t *) ((int) hw_p->alloc_tx_buf +
-					CFG_CACHELINE_SIZE -
-					((int) hw_p->
-					 alloc_tx_buf & CACHELINE_MASK));
-	} else {
-		hw_p->tx = hw_p->alloc_tx_buf;
-	}
+	if (hw_p->first_init == 0) {
+		debug("*** Allocating descriptor memory ***\n");
 
-	hw_p->alloc_rx_buf =
-		(mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_RX_BUFF) +
-				       ((2 * CFG_CACHELINE_SIZE) - 2));
-	if (NULL == hw_p->alloc_rx_buf) {
-		free(hw_p->alloc_tx_buf);
-		hw_p->alloc_tx_buf = NULL;
-		return -1;
-	}
+		bd_cached = (u32)malloc_aligned(MAL_ALLOC_SIZE, 4096);
+		if (!bd_cached) {
+			printf("%s: Error allocating MAL descriptor buffers!\n");
+			return -1;
+		}
 
-	if (((int) hw_p->alloc_rx_buf & CACHELINE_MASK) != 0) {
-		hw_p->rx =
-			(mal_desc_t *) ((int) hw_p->alloc_rx_buf +
-					CFG_CACHELINE_SIZE -
-					((int) hw_p->
-					 alloc_rx_buf & CACHELINE_MASK));
-	} else {
-		hw_p->rx = hw_p->alloc_rx_buf;
+#ifdef CONFIG_4xx_DCACHE
+		flush_dcache_range(bd_cached, bd_cached + MAL_ALLOC_SIZE);
+		bd_uncached = bis->bi_memsize;
+		program_tlb(bd_cached, bd_uncached, MAL_ALLOC_SIZE,
+			    TLB_WORD2_I_ENABLE);
+#else
+		bd_uncached = bd_cached;
+#endif
+		hw_p->tx_phys = bd_cached;
+		hw_p->rx_phys = bd_cached + MAL_TX_DESC_SIZE;
+		hw_p->tx = (mal_desc_t *)(bd_uncached);
+		hw_p->rx = (mal_desc_t *)(bd_uncached + MAL_TX_DESC_SIZE);
+		debug("hw_p->tx=%08x, hw_p->rx=%08x\n", hw_p->tx, hw_p->rx);
 	}
 
 	for (i = 0; i < NUM_TX_BUFF; i++) {
 		hw_p->tx[i].ctrl = 0;
 		hw_p->tx[i].data_len = 0;
-		if (hw_p->first_init == 0) {
-			hw_p->txbuf_ptr =
-				(char *) malloc (ENET_MAX_MTU_ALIGNED);
-			if (NULL == hw_p->txbuf_ptr) {
-				free(hw_p->alloc_rx_buf);
-				free(hw_p->alloc_tx_buf);
-				hw_p->alloc_rx_buf = NULL;
-				hw_p->alloc_tx_buf = NULL;
-				for(j = 0; j < i; j++) {
-					free(hw_p->tx[i].data_ptr);
-					hw_p->tx[i].data_ptr = NULL;
-				}
-			}
-		}
+		if (hw_p->first_init == 0)
+			hw_p->txbuf_ptr = malloc_aligned(MAL_ALLOC_SIZE,
+							 L1_CACHE_BYTES);
 		hw_p->tx[i].data_ptr = hw_p->txbuf_ptr;
 		if ((NUM_TX_BUFF - 1) == i)
 			hw_p->tx[i].ctrl |= MAL_TX_CTRL_WRAP;
 		hw_p->tx_run[i] = -1;
-#if 0
-		printf ("TX_BUFF %d @ 0x%08lx\n", i,
-			(ulong) hw_p->tx[i].data_ptr);
-#endif
+		debug("TX_BUFF %d @ 0x%08lx\n", i, (u32)hw_p->tx[i].data_ptr);
 	}
 
 	for (i = 0; i < NUM_RX_BUFF; i++) {
 		hw_p->rx[i].ctrl = 0;
 		hw_p->rx[i].data_len = 0;
-		/*	 rx[i].data_ptr = (char *) &rx_buff[i]; */
-		hw_p->rx[i].data_ptr = (char *) NetRxPackets[i];
+		hw_p->rx[i].data_ptr = (char *)NetRxPackets[i];
 		if ((NUM_RX_BUFF - 1) == i)
 			hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP;
 		hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR;
 		hw_p->rx_ready[i] = -1;
-#if 0
-		printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->rx[i].data_ptr);
-#endif
+		debug("RX_BUFF %d @ 0x%08lx\n", i, (u32)hw_p->rx[i].data_ptr);
 	}
 
 	reg = 0x00000000;
@@ -844,7 +893,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	reg = reg << 8;
 	reg |= dev->enetaddr[1];
 
-	out32 (EMAC_IAH + hw_p->hw_addr, reg);
+	out_be32((void *)EMAC_IAH + hw_p->hw_addr, reg);
 
 	reg = 0x00000000;
 	reg |= dev->enetaddr[2];	/* set low address  */
@@ -855,21 +904,21 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	reg = reg << 8;
 	reg |= dev->enetaddr[5];
 
-	out32 (EMAC_IAL + hw_p->hw_addr, reg);
+	out_be32((void *)EMAC_IAL + hw_p->hw_addr, reg);
 
 	switch (devnum) {
 	case 1:
 		/* setup MAL tx & rx channel pointers */
 #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
-		mtdcr (maltxctp2r, hw_p->tx);
+		mtdcr (maltxctp2r, hw_p->tx_phys);
 #else
-		mtdcr (maltxctp1r, hw_p->tx);
+		mtdcr (maltxctp1r, hw_p->tx_phys);
 #endif
 #if defined(CONFIG_440)
 		mtdcr (maltxbattr, 0x0);
 		mtdcr (malrxbattr, 0x0);
 #endif
-		mtdcr (malrxctp1r, hw_p->rx);
+		mtdcr (malrxctp1r, hw_p->rx_phys);
 		/* set RX buffer size */
 		mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
 		break;
@@ -878,17 +927,17 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		/* setup MAL tx & rx channel pointers */
 		mtdcr (maltxbattr, 0x0);
 		mtdcr (malrxbattr, 0x0);
-		mtdcr (maltxctp2r, hw_p->tx);
-		mtdcr (malrxctp2r, hw_p->rx);
+		mtdcr (maltxctp2r, hw_p->tx_phys);
+		mtdcr (malrxctp2r, hw_p->rx_phys);
 		/* set RX buffer size */
 		mtdcr (malrcbs2, ENET_MAX_MTU_ALIGNED / 16);
 		break;
 	case 3:
 		/* setup MAL tx & rx channel pointers */
 		mtdcr (maltxbattr, 0x0);
-		mtdcr (maltxctp3r, hw_p->tx);
+		mtdcr (maltxctp3r, hw_p->tx_phys);
 		mtdcr (malrxbattr, 0x0);
-		mtdcr (malrxctp3r, hw_p->rx);
+		mtdcr (malrxctp3r, hw_p->rx_phys);
 		/* set RX buffer size */
 		mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16);
 		break;
@@ -900,8 +949,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		mtdcr (maltxbattr, 0x0);
 		mtdcr (malrxbattr, 0x0);
 #endif
-		mtdcr (maltxctp0r, hw_p->tx);
-		mtdcr (malrxctp0r, hw_p->rx);
+		mtdcr (maltxctp0r, hw_p->tx_phys);
+		mtdcr (malrxctp0r, hw_p->rx_phys);
 		/* set RX buffer size */
 		mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16);
 		break;
@@ -916,10 +965,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
 
 	/* set transmit enable & receive enable */
-	out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
+	out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
 
 	/* set receive fifo to 4k and tx fifo to 2k */
-	mode_reg = in32 (EMAC_M1 + hw_p->hw_addr);
+	mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr);
 	mode_reg |= EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K;
 
 	/* set speed */
@@ -940,46 +989,46 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	if (duplex == FULL)
 		mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST;
 
-	out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
+	out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
 
 	/* Enable broadcast and indvidual address */
 	/* TBS: enabling runts as some misbehaved nics will send runts */
-	out32 (EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE);
+	out_be32((void *)EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE);
 
 	/* we probably need to set the tx mode1 reg? maybe at tx time */
 
 	/* set transmit request threshold register */
-	out32 (EMAC_TRTR + hw_p->hw_addr, 0x18000000);	/* 256 byte threshold */
+	out_be32((void *)EMAC_TRTR + hw_p->hw_addr, 0x18000000);	/* 256 byte threshold */
 
 	/* set receive	low/high water mark register */
 #if defined(CONFIG_440)
 	/* 440s has a 64 byte burst length */
-	out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
+	out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
 #else
 	/* 405s have a 16 byte burst length */
-	out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000);
+	out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000);
 #endif /* defined(CONFIG_440) */
-	out32 (EMAC_TXM1 + hw_p->hw_addr, 0xf8640000);
+	out_be32((void *)EMAC_TXM1 + hw_p->hw_addr, 0xf8640000);
 
 	/* Set fifo limit entry in tx mode 0 */
-	out32 (EMAC_TXM0 + hw_p->hw_addr, 0x00000003);
+	out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, 0x00000003);
 	/* Frame gap set */
-	out32 (EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008);
+	out_be32((void *)EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008);
 
 	/* Set EMAC IER */
 	hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
 	if (speed == _100BASET)
 		hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE;
 
-	out32 (EMAC_ISR + hw_p->hw_addr, 0xffffffff);	/* clear pending interrupts */
-	out32 (EMAC_IER + hw_p->hw_addr, hw_p->emac_ier);
+	out_be32((void *)EMAC_ISR + hw_p->hw_addr, 0xffffffff);	/* clear pending interrupts */
+	out_be32((void *)EMAC_IER + hw_p->hw_addr, hw_p->emac_ier);
 
 	if (hw_p->first_init == 0) {
 		/*
 		 * Connect interrupt service routines
 		 */
-		irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
-				     (interrupt_handler_t *) enetInt, dev);
+		irq_install_handler(ETH_IRQ_NUM(hw_p->devnum),
+				    (interrupt_handler_t *) enetInt, dev);
 	}
 
 	mtmsr (msr);		/* enable interrupts again */
@@ -1015,6 +1064,7 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 
 	/*   memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */
 	memcpy ((void *) hw_p->txbuf_ptr, (const void *) ptr, len);
+	flush_dcache_range((u32)hw_p->txbuf_ptr, (u32)hw_p->txbuf_ptr + len);
 
 	/*-----------------------------------------------------------------------+
 	 * set TX Buffer busy, and send it
@@ -1030,8 +1080,8 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 
 	__asm__ volatile ("eieio");
 
-	out32 (EMAC_TXM0 + hw_p->hw_addr,
-	       in32 (EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
+	out_be32((void *)EMAC_TXM0 + hw_p->hw_addr,
+		 in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
 #ifdef INFO_4XX_ENET
 	hw_p->stats.pkts_tx++;
 #endif
@@ -1041,7 +1091,7 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 	 *-----------------------------------------------------------------------*/
 	time_start = get_timer (0);
 	while (1) {
-		temp_txm0 = in32 (EMAC_TXM0 + hw_p->hw_addr);
+		temp_txm0 = in_be32((void *)EMAC_TXM0 + hw_p->hw_addr);
 		/* loop until either TINT turns on or 3 seconds elapse */
 		if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) {
 			/* transmit is done, so now check for errors
@@ -1059,7 +1109,7 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 }
 
 
-#if defined (CONFIG_440)
+#if defined (CONFIG_440) || defined(CONFIG_405EX)
 
 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 /*
@@ -1073,7 +1123,8 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 #define UIC0SR		uic0sr
 #endif
 
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define UICMSR_ETHX	uic0msr
 #define UICSR_ETHX	uic0sr
 #else
@@ -1149,7 +1200,7 @@ int enetInt (struct eth_device *dev)
 		/* port by port dispatch of emac interrupts */
 		if (hw_p->devnum == 0) {
 			if (UIC_ETH0 & my_uicmsr_ethx) {	/* look for EMAC errors */
-				emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
 				if ((hw_p->emac_ier & emac_isr) != 0) {
 					emac_err (dev, emac_isr);
 					serviced = 1;
@@ -1168,7 +1219,7 @@ int enetInt (struct eth_device *dev)
 #if !defined(CONFIG_440SP)
 		if (hw_p->devnum == 1) {
 			if (UIC_ETH1 & my_uicmsr_ethx) {	/* look for EMAC errors */
-				emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
 				if ((hw_p->emac_ier & emac_isr) != 0) {
 					emac_err (dev, emac_isr);
 					serviced = 1;
@@ -1186,7 +1237,7 @@ int enetInt (struct eth_device *dev)
 #if defined (CONFIG_440GX)
 		if (hw_p->devnum == 2) {
 			if (UIC_ETH2 & my_uic2msr) {	/* look for EMAC errors */
-				emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
 				if ((hw_p->emac_ier & emac_isr) != 0) {
 					emac_err (dev, emac_isr);
 					serviced = 1;
@@ -1204,7 +1255,7 @@ int enetInt (struct eth_device *dev)
 
 		if (hw_p->devnum == 3) {
 			if (UIC_ETH3 & my_uic2msr) {	/* look for EMAC errors */
-				emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
 				if ((hw_p->emac_ier & emac_isr) != 0) {
 					emac_err (dev, emac_isr);
 					serviced = 1;
@@ -1316,7 +1367,7 @@ int enetInt (struct eth_device *dev)
 		/* port by port dispatch of emac interrupts */
 
 		if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) {	/* look for EMAC errors */
-			emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+			emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
 			if ((hw_p->emac_ier & emac_isr) != 0) {
 				emac_err (dev, emac_isr);
 				serviced = 1;
@@ -1390,7 +1441,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr)
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 
 	printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
-	out32 (EMAC_ISR + hw_p->hw_addr, isr);
+	out_be32((void *)EMAC_ISR + hw_p->hw_addr, isr);
 }
 
 /*-----------------------------------------------------------------------------+
@@ -1513,6 +1564,9 @@ static int ppc_4xx_eth_rx (struct eth_device *dev)
 		/* Pass the packet up to the protocol layers. */
 		/*	 NetReceive(NetRxPackets[rxIdx], length - 4); */
 		/*	 NetReceive(NetRxPackets[i], length); */
+		invalidate_dcache_range((u32)hw_p->rx[user_index].data_ptr,
+					(u32)hw_p->rx[user_index].data_ptr +
+					length - 4);
 		NetReceive (NetRxPackets[user_index], length - 4);
 		/* Free Recv Buffer */
 		hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY;
@@ -1601,7 +1655,11 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 	bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
 	bis->bi_phymode[2] = 2;
 	bis->bi_phymode[3] = 2;
+#endif
 
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 	ppc_4xx_eth_setup_bridge(0, bis);
 #endif
 
@@ -1649,7 +1707,9 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 
 		if (0 == virgin) {
 			/* set the MAL IER ??? names may change with new spec ??? */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 			mal_ier =
 				MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
 				MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ;
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/4xx_pci.c
index 282e7a1ba..a68c419b1 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -72,7 +72,7 @@
 #include <common.h>
 #include <command.h>
 #if !defined(CONFIG_440)
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 #endif
 #include <asm/processor.h>
 #include <pci.h>
@@ -592,4 +592,15 @@ void pci_init_board(void)
 }
 
 #endif /* CONFIG_440 */
+
+#if defined(CONFIG_405EX)
+void pci_init_board(void)
+{
+#ifdef CONFIG_PCI_SCAN_SHOW
+	printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+	pcie_setup_hoses(0);
+}
+#endif /* CONFIG_405EX */
+
 #endif /* CONFIG_PCI */
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index 3eac0ae62..3af9862bf 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -20,15 +20,21 @@
  *
  */
 
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
 #include <asm/processor.h>
 #include <asm-ppc/io.h>
 #include <ppc4xx.h>
 #include <common.h>
 #include <pci.h>
 
-#if defined(CONFIG_440SPE) && defined(CONFIG_PCI)
+#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX)) && \
+    defined(CONFIG_PCI)
 
-#include "440spe_pcie.h"
+#include <asm/4xx_pcie.h>
 
 enum {
 	PTYPE_ENDPOINT		= 0x0,
@@ -40,6 +46,20 @@ enum {
 	LNKW_X8			= 0x8
 };
 
+static int validate_endpoint(struct pci_controller *hose)
+{
+	if (hose->cfg_data == (u8 *)CFG_PCIE0_CFGBASE)
+		return (is_end_point(0));
+	else if (hose->cfg_data == (u8 *)CFG_PCIE1_CFGBASE)
+		return (is_end_point(1));
+#if CFG_PCIE_NR_PORTS > 2
+	else if (hose->cfg_data == (u8 *)CFG_PCIE2_CFGBASE)
+		return (is_end_point(2));
+#endif
+
+	return 0;
+}
+
 static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
 {
 	u8 *base = (u8*)hose->cfg_data;
@@ -50,8 +70,10 @@ static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
 			base = (u8*)CFG_PCIE0_XCFGBASE;
 		if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE)
 			base = (u8*)CFG_PCIE1_XCFGBASE;
+#if CFG_PCIE_NR_PORTS > 2
 		if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE)
 			base = (u8*)CFG_PCIE2_XCFGBASE;
+#endif
 	}
 
 	return base;
@@ -63,8 +85,10 @@ static void pcie_dmer_disable(void)
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
 	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
+#if CFG_PCIE_NR_PORTS > 2
 	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
+#endif
 }
 
 static void pcie_dmer_enable(void)
@@ -73,8 +97,10 @@ static void pcie_dmer_enable(void)
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
 	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
+#if CFG_PCIE_NR_PORTS > 2
 	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
+#endif
 }
 
 static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
@@ -83,6 +109,9 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
 	u8 *address;
 	*val = 0;
 
+	if (validate_endpoint(hose))
+		return 0;		/* No upstream config access */
+
 	/*
 	 * Bus numbers are relative to hose->first_busno
 	 */
@@ -115,6 +144,7 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
 	 */
 	pcie_dmer_disable ();
 
+	debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
 	switch (len) {
 	case 1:
 		*val = in_8(hose->cfg_data + offset);
@@ -137,6 +167,9 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
 
 	u8 *address;
 
+	if (validate_endpoint(hose))
+		return 0;		/* No upstream config access */
+
 	/*
 	 * Bus numbers are relative to hose->first_busno
 	 */
@@ -222,7 +255,8 @@ int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset
 	return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
 }
 
-static void ppc440spe_setup_utl(u32 port) {
+#if defined(CONFIG_440SPE)
+static void ppc4xx_setup_utl(u32 port) {
 
 	volatile void *utl_base = NULL;
 
@@ -333,7 +367,7 @@ static int check_error(void)
 /*
  * Initialize PCI Express core
  */
-int ppc440spe_init_pcie(void)
+int ppc4xx_init_pcie(void)
 {
 	int time_out = 20;
 
@@ -366,13 +400,223 @@ int ppc440spe_init_pcie(void)
 	}
 	return 0;
 }
+#else
+static void ppc4xx_setup_utl(u32 port)
+{
+	u32 utl_base;
+
+	/*
+	 * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CFG_PCIE0_UTLBASE);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CFG_PCIE1_UTLBASE);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+
+		break;
+	}
+	utl_base = (port==0) ? CFG_PCIE0_UTLBASE : CFG_PCIE1_UTLBASE;
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32((u32 *)(utl_base + PEUTL_OUTTR),   0x02000000);
+	out_be32((u32 *)(utl_base + PEUTL_INTR),    0x02000000);
+	out_be32((u32 *)(utl_base + PEUTL_OPDBSZ),  0x04000000);
+	out_be32((u32 *)(utl_base + PEUTL_PBBSZ),   0x21000000);
+	out_be32((u32 *)(utl_base + PEUTL_IPHBSZ),  0x02000000);
+	out_be32((u32 *)(utl_base + PEUTL_IPDBSZ),  0x04000000);
+	out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
+	out_be32((u32 *)(utl_base + PEUTL_PCTL),    0x80800066);
+
+	out_be32((u32 *)(utl_base + PEUTL_PBCTL),   0x0800000c);
+	out_be32((u32 *)(utl_base + PEUTL_RCSTA),
+		 in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
+}
+
+int ppc4xx_init_pcie(void)
+{
+	/*
+	 * Nothing to do on 405EX
+	 */
+	return 0;
+}
+#endif
 
 /*
- *  Yucca board as End point and root point setup
+ * Board-specific pcie initialization
+ * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
+ */
+
+/*
+ * Initialize various parts of the PCI Express core for our port:
+ *
+ * - Set as a root port and enable max width
+ *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+ * - Set up UTL configuration.
+ * - Increase SERDES drive strength to levels suggested by AMCC.
+ * - De-assert RSTPYN, RSTDL and RSTGU.
+ *
+ * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
+ * with default setting 0x11310000. The register has new fields,
+ * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+ * hang.
+ */
+#if defined(CONFIG_440SPE)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+	u32 val = 1 << 24;
+	u32 utlset1;
+
+	if (rootport) {
+		val = PTYPE_ROOT_PORT << 20;
+		utlset1 = 0x21222222;
+	} else {
+		val = PTYPE_LEGACY_ENDPOINT << 20;
+		utlset1 = 0x20222222;
+	}
+
+	if (port == 0)
+		val |= LNKW_X8 << 12;
+	else
+		val |= LNKW_X4 << 12;
+
+	SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+	SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
+	if (!ppc440spe_revB())
+		SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
+	SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
+	SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
+	SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
+	SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
+	if (port == 0) {
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+	}
+	SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
+					    ~(1 << 24 | 1 << 16)) | 1 << 12);
+
+	return 0;
+}
+#endif /* CONFIG_440SPE */
+
+#if defined(CONFIG_405EX)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+	u32 val;
+
+	if (rootport)
+		val = 0x00401000;
+	else
+		val = 0x00101000;
+
+	SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+	SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
+	SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
+	SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
+	SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
+
+	/* Assert the PE0_PHY reset */
+	SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
+	udelay(1000);
+
+	/* deassert the PE0_hotreset */
+	if (is_end_point(port))
+		SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
+	else
+		SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
+
+	/* poll for phy !reset */
+	while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
+		;
+
+	/* deassert the PE0_gpl_utl_reset */
+	SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
+
+	if (port == 0)
+		mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000);  /* guarded on */
+	else
+		mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000);  /* guarded on */
+
+	return 0;
+}
+#endif /* CONFIG_405EX */
+
+int ppc4xx_init_pcie_port_hw(int port, int rootport)
+__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
+
+/*
+ * We map PCI Express configuration access into the 512MB regions
+ *
+ * NOTICE: revB is very strict about PLB real addressess and ranges to
+ * be mapped for config space; it seems to only work with d_nnnn_nnnn
+ * range (hangs the core upon config transaction attempts when set
+ * otherwise) while revA uses c_nnnn_nnnn.
+ *
+ * For revA:
+ *     PCIE0: 0xc_4000_0000
+ *     PCIE1: 0xc_8000_0000
+ *     PCIE2: 0xc_c000_0000
+ *
+ * For revB:
+ *     PCIE0: 0xd_0000_0000
+ *     PCIE1: 0xd_2000_0000
+ *     PCIE2: 0xd_4000_0000
+ *
+ * For 405EX:
+ *     PCIE0: 0xa000_0000
+ *     PCIE1: 0xc000_0000
+ */
+static inline u64 ppc4xx_get_cfgaddr(int port)
+{
+#if defined(CONFIG_405EX)
+	if (port == 0)
+		return (u64)CFG_PCIE0_CFGBASE;
+	else
+		return (u64)CFG_PCIE1_CFGBASE;
+#endif
+#if defined(CONFIG_440SPE)
+	if (ppc440spe_revB()) {
+		switch (port) {
+		default:	/* to satisfy compiler */
+		case 0:
+			return 0x0000000d00000000ULL;
+		case 1:
+			return 0x0000000d20000000ULL;
+		case 2:
+			return 0x0000000d40000000ULL;
+		}
+	} else {
+		switch (port) {
+		default:	/* to satisfy compiler */
+		case 0:
+			return 0x0000000c40000000ULL;
+		case 1:
+			return 0x0000000c80000000ULL;
+		case 2:
+			return 0x0000000cc0000000ULL;
+		}
+	}
+#endif
+}
+
+/*
+ *  4xx boards as end point and root point setup
  *                    and
  *    testing inbound and out bound windows
  *
- *  YUCCA board can be plugged into another yucca board or you can get PCI-E
+ *  4xx boards can be plugged into another 4xx boards or you can get PCI-E
  *  cable which can be used to setup loop back from one port to another port.
  *  Please rememeber that unless there is a endpoint plugged in to root port it
  *  will not initialize. It is the same in case of endpoint , unless there is
@@ -386,110 +630,47 @@ int ppc440spe_init_pcie(void)
  *  /proc/bus/pci/devices. Where you can see the configuration registers
  *  of end point device attached to the port.
  *
- *  Enpoint cofiguration can be verified by connecting Yucca board to any
- *  host or another yucca board. Then try to scan the device. In case of
+ *  Enpoint cofiguration can be verified by connecting 4xx board to any
+ *  host or another 4xx board. Then try to scan the device. In case of
  *  linux use "lspci" or appripriate os command.
  *
- *  How do I verify the inbound and out bound windows ?(yucca to yucca)
+ *  How do I verify the inbound and out bound windows ? (4xx to 4xx)
  *  in this configuration inbound and outbound windows are setup to access
  *  sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
  *  is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
  *  This is waere your POM(PLB out bound memory window) mapped. then
- *  read the data from other yucca board's u-boot prompt at address
+ *  read the data from other 4xx board's u-boot prompt at address
  *  0x9000 0000(SRAM). Data should match.
  *  In case of inbound , write data to u-boot command prompt at 0xb000 0000
  *  which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
  *  data at 0x9000 0000(SRAM).Data should match.
  */
-int ppc440spe_init_pcie_rootport(int port)
+int ppc4xx_init_pcie_port(int port, int rootport)
 {
 	static int core_init;
 	volatile u32 val = 0;
 	int attempts;
+	u64 addr;
+	u32 low, high;
 
 	if (!core_init) {
-		++core_init;
-		if (ppc440spe_init_pcie())
+		if (ppc4xx_init_pcie())
 			return -1;
+		++core_init;
 	}
 
 	/*
-	 * Initialize various parts of the PCI Express core for our port:
-	 *
-	 * - Set as a root port and enable max width
-	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
-	 * - Set up UTL configuration.
-	 * - Increase SERDES drive strength to levels suggested by AMCC.
-	 * - De-assert RSTPYN, RSTDL and RSTGU.
-	 *
-	 * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
-	 * default setting 0x11310000. The register has new fields,
-	 * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
-	 * hang.
+	 * Initialize various parts of the PCI Express core for our port
 	 */
-	switch (port) {
-	case 0:
-		SDR_WRITE(PESDR0_DLPSET,  1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
-
-		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
-		if (!ppc440spe_revB())
-			SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
-		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
-		SDR_WRITE(PESDR0_RCSSET,
-			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
+	ppc4xx_init_pcie_port_hw(port, rootport);
 
-	case 1:
-		SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
-		if (!ppc440spe_revB())
-			SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
-		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR1_RCSSET,
-			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 2:
-		SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
-		if (!ppc440spe_revB())
-			SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
-		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR2_RCSSET,
-			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-	}
 	/*
 	 * Notice: the following delay has critical impact on device
 	 * initialization - if too short (<50ms) the link doesn't get up.
 	 */
 	mdelay(100);
 
-	switch (port) {
-	case 0:
-		val = SDR_READ(PESDR0_RCSSTS);
-		break;
-	case 1:
-		val = SDR_READ(PESDR1_RCSSTS);
-		break;
-	case 2:
-		val = SDR_READ(PESDR2_RCSSTS);
-		break;
-	}
-
+	val = SDR_READ(SDRN_PESDR_RCSSTS(port));
 	if (val & (1 << 20)) {
 		printf("PCIE%d: PGRST failed %08x\n", port, val);
 		return -1;
@@ -498,18 +679,7 @@ int ppc440spe_init_pcie_rootport(int port)
 	/*
 	 * Verify link is up
 	 */
-	val = 0;
-	switch (port) {
-	case 0:
-		val = SDR_READ(PESDR0_LOOP);
-		break;
-	case 1:
-		val = SDR_READ(PESDR1_LOOP);
-		break;
-	case 2:
-		val = SDR_READ(PESDR2_LOOP);
-		break;
-	}
+	val = SDR_READ(SDRN_PESDR_LOOP(port));
 	if (!(val & 0x00001000)) {
 		printf("PCIE%d: link is not up.\n", port);
 		return -1;
@@ -520,331 +690,75 @@ int ppc440spe_init_pcie_rootport(int port)
 	 * We use default settings for revB chip.
 	 */
 	if (!ppc440spe_revB())
-		ppc440spe_setup_utl(port);
+		ppc4xx_setup_utl(port);
 
 	/*
 	 * We map PCI Express configuration access into the 512MB regions
-	 *
-	 * NOTICE: revB is very strict about PLB real addressess and ranges to
-	 * be mapped for config space; it seems to only work with d_nnnn_nnnn
-	 * range (hangs the core upon config transaction attempts when set
-	 * otherwise) while revA uses c_nnnn_nnnn.
-	 *
-	 * For revA:
-	 *     PCIE0: 0xc_4000_0000
-	 *     PCIE1: 0xc_8000_0000
-	 *     PCIE2: 0xc_c000_0000
-	 *
-	 * For revB:
-	 *     PCIE0: 0xd_0000_0000
-	 *     PCIE1: 0xd_2000_0000
-	 *     PCIE2: 0xd_4000_0000
 	 */
+	addr = ppc4xx_get_cfgaddr(port);
+	low = U64_TO_U32_LOW(addr);
+	high = U64_TO_U32_HIGH(addr);
 
 	switch (port) {
 	case 0:
-		if (ppc440spe_revB()) {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
-		} else {
-			/* revA */
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
-		}
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
 		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
 		break;
-
 	case 1:
-		if (ppc440spe_revB()) {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
-		} else {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
-		}
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
 		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
 		break;
-
+#if CFG_PCIE_NR_PORTS > 2
 	case 2:
-		if (ppc440spe_revB()) {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
-		} else {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
-		}
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
 		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
 		break;
+#endif
 	}
 
 	/*
 	 * Check for VC0 active and assert RDY.
 	 */
 	attempts = 10;
-	switch (port) {
-	case 0:
-		while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
-			if (!(attempts--)) {
-				printf("PCIE0: VC0 not active\n");
-				return -1;
-			}
-			mdelay(1000);
-		}
-		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
-		break;
-	case 1:
-		while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
-			if (!(attempts--)) {
-				printf("PCIE1: VC0 not active\n");
-				return -1;
-			}
-			mdelay(1000);
-		}
-
-		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
-		break;
-	case 2:
-		while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
-			if (!(attempts--)) {
-				printf("PCIE2: VC0 not active\n");
-				return -1;
-			}
-			mdelay(1000);
+	while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
+		if (!(attempts--)) {
+			printf("PCIE%d: VC0 not active\n", port);
+			return -1;
 		}
-
-		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
-		break;
+		mdelay(1000);
 	}
+	SDR_WRITE(SDRN_PESDR_RCSSET(port),
+		  SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
 	mdelay(100);
 
 	return 0;
 }
 
-int ppc440spe_init_pcie_endport(int port)
+int ppc4xx_init_pcie_rootport(int port)
 {
-	static int core_init;
-	volatile u32 val = 0;
-	int attempts;
-
-	if (!core_init) {
-		++core_init;
-		if (ppc440spe_init_pcie())
-			return -1;
-	}
-
-	/*
-	 * Initialize various parts of the PCI Express core for our port:
-	 *
-	 * - Set as a end port and enable max width
-	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
-	 * - Set up UTL configuration.
-	 * - Increase SERDES drive strength to levels suggested by AMCC.
-	 * - De-assert RSTPYN, RSTDL and RSTGU.
-	 *
-	 * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
-	 * default setting 0x11310000. The register has new fields,
-	 * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
-	 * hang.
-	 */
-	switch (port) {
-	case 0:
-		SDR_WRITE(PESDR0_DLPSET,  1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X8 << 12);
-
-		SDR_WRITE(PESDR0_UTLSET1, 0x20222222);
-		if (!ppc440spe_revB())
-			SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
-		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
-		SDR_WRITE(PESDR0_RCSSET,
-			(SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 1:
-		SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
-		SDR_WRITE(PESDR1_UTLSET1, 0x20222222);
-		if (!ppc440spe_revB())
-			SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
-		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR1_RCSSET,
-			(SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 2:
-		SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
-		SDR_WRITE(PESDR2_UTLSET1, 0x20222222);
-		if (!ppc440spe_revB())
-			SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
-		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR2_RCSSET,
-			(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-	}
-	/*
-	 * Notice: the following delay has critical impact on device
-	 * initialization - if too short (<50ms) the link doesn't get up.
-	 */
-	mdelay(100);
-
-	switch (port) {
-	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
-	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
-	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
-	}
-
-	if (val & (1 << 20)) {
-		printf("PCIE%d: PGRST failed %08x\n", port, val);
-		return -1;
-	}
-
-	/*
-	 * Verify link is up
-	 */
-	val = 0;
-	switch (port)
-	{
-		case 0:
-			val = SDR_READ(PESDR0_LOOP);
-			break;
-		case 1:
-			val = SDR_READ(PESDR1_LOOP);
-			break;
-		case 2:
-			val = SDR_READ(PESDR2_LOOP);
-			break;
-	}
-	if (!(val & 0x00001000)) {
-		printf("PCIE%d: link is not up.\n", port);
-		return -1;
-	}
-
-	/*
-	 * Setup UTL registers - but only on revA!
-	 * We use default settings for revB chip.
-	 */
-	if (!ppc440spe_revB())
-		ppc440spe_setup_utl(port);
-
-	/*
-	 * We map PCI Express configuration access into the 512MB regions
-	 *
-	 * NOTICE: revB is very strict about PLB real addressess and ranges to
-	 * be mapped for config space; it seems to only work with d_nnnn_nnnn
-	 * range (hangs the core upon config transaction attempts when set
-	 * otherwise) while revA uses c_nnnn_nnnn.
-	 *
-	 * For revA:
-	 *     PCIE0: 0xc_4000_0000
-	 *     PCIE1: 0xc_8000_0000
-	 *     PCIE2: 0xc_c000_0000
-	 *
-	 * For revB:
-	 *     PCIE0: 0xd_0000_0000
-	 *     PCIE1: 0xd_2000_0000
-	 *     PCIE2: 0xd_4000_0000
-	 */
-	switch (port) {
-	case 0:
-		if (ppc440spe_revB()) {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
-		} else {
-			/* revA */
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
-		}
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 1:
-		if (ppc440spe_revB()) {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
-		} else {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
-		}
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 2:
-		if (ppc440spe_revB()) {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
-		} else {
-			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
-			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
-		}
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
-		break;
-	}
-
-	/*
-	 * Check for VC0 active and assert RDY.
-	 */
-	attempts = 10;
-	switch (port) {
-	case 0:
-		while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
-			if (!(attempts--)) {
-				printf("PCIE0: VC0 not active\n");
-				return -1;
-			}
-			mdelay(1000);
-		}
-		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
-		break;
-	case 1:
-		while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
-			if (!(attempts--)) {
-				printf("PCIE1: VC0 not active\n");
-				return -1;
-			}
-			mdelay(1000);
-		}
-
-		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
-		break;
-	case 2:
-		while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
-			if (!(attempts--)) {
-				printf("PCIE2: VC0 not active\n");
-				return -1;
-			}
-			mdelay(1000);
-		}
-
-		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
-		break;
-	}
-	mdelay(100);
+	return ppc4xx_init_pcie_port(port, 1);
+}
 
-	return 0;
+int ppc4xx_init_pcie_endport(int port)
+{
+	return ppc4xx_init_pcie_port(port, 0);
 }
 
-void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
+void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 {
 	volatile void *mbase = NULL;
 	volatile void *rmbase = NULL;
 
 	pci_set_ops(hose,
-		pcie_read_config_byte,
-		pcie_read_config_word,
-		pcie_read_config_dword,
-		pcie_write_config_byte,
-		pcie_write_config_word,
-		pcie_write_config_dword);
+		    pcie_read_config_byte,
+		    pcie_read_config_word,
+		    pcie_read_config_dword,
+		    pcie_write_config_byte,
+		    pcie_write_config_word,
+		    pcie_write_config_dword);
 
 	switch (port) {
 	case 0:
@@ -857,11 +771,13 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 		rmbase = (u32 *)CFG_PCIE1_CFGBASE;
 		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
 		break;
+#if CFG_PCIE_NR_PORTS > 2
 	case 2:
 		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
 		rmbase = (u32 *)CFG_PCIE2_CFGBASE;
 		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
 		break;
+#endif
 	}
 
 	/*
@@ -878,33 +794,53 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 	 * subregions and to enable the outbound translation.
 	 */
 	out_le32(mbase + PECFG_POM0LAH, 0x00000000);
-	out_le32(mbase + PECFG_POM0LAL, 0x00000000);
+	out_le32(mbase + PECFG_POM0LAL, CFG_PCIE_MEMBASE +
+		 port * CFG_PCIE_MEMSIZE);
+	debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
+	      in_le32(mbase + PECFG_POM0LAL));
 
 	switch (port) {
 	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  CFG_PCIE_MEMBASE +
-			port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CFG_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
+		      port * CFG_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
+		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
+		      mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
+		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
 		break;
 	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  (CFG_PCIE_MEMBASE +
-			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CFG_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CFG_PCIE_MEMBASE +
+		      port * CFG_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-			~(CFG_PCIE_MEMSIZE - 1) | 3);
-		break;
+		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
+		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
+		      mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
+		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
+		break;
+#if CFG_PCIE_NR_PORTS > 2
 	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  (CFG_PCIE_MEMBASE +
-			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CFG_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CFG_PCIE_MEMBASE +
+		      port * CFG_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
+		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
+		      mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
+		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
 		break;
+#endif
 	}
 
 	/* Set up 16GB inbound memory window at 0 */
@@ -917,41 +853,26 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 	out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
 	out_le32(mbase + PECFG_PIM0LAL, 0);
 	out_le32(mbase + PECFG_PIM0LAH, 0);
-	out_le32(mbase + PECFG_PIM1LAL,  0x00000000);
-	out_le32(mbase + PECFG_PIM1LAH,  0x00000004);
+	out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+	out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
 	out_le32(mbase + PECFG_PIMEN, 0x1);
 
 	/* Enable I/O, Mem, and Busmaster cycles */
 	out_le16((u16 *)(mbase + PCI_COMMAND),
 		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
 		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	printf("PCIE:%d successfully set as rootpoint\n",port);
 
 	/* Set Device and Vendor Id */
-	switch (port) {
-	case 0:
-		out_le16(mbase + 0x200, 0xaaa0);
-		out_le16(mbase + 0x202, 0xbed0);
-		break;
-	case 1:
-		out_le16(mbase + 0x200, 0xaaa1);
-		out_le16(mbase + 0x202, 0xbed1);
-		break;
-	case 2:
-		out_le16(mbase + 0x200, 0xaaa2);
-		out_le16(mbase + 0x202, 0xbed2);
-		break;
-	default:
-		out_le16(mbase + 0x200, 0xaaa3);
-		out_le16(mbase + 0x202, 0xbed3);
-	}
+	out_le16(mbase + 0x200, 0xaaa0 + port);
+	out_le16(mbase + 0x202, 0xbed0 + port);
 
 	/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
 	out_le32(mbase + 0x208, 0x06040001);
 
+	printf("PCIE%d: successfully set as root-complex\n", port);
 }
 
-int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
+int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
 {
 	volatile void *mbase = NULL;
 	int attempts = 0;
@@ -973,10 +894,12 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
 		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
 		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
 		break;
+#if defined(CFG_PCIE2_CFGBASE)
 	case 2:
 		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
 		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
 		break;
+#endif
 	}
 
 	/*
@@ -990,77 +913,73 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
 
 	switch (port) {
 	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  CFG_PCIE_MEMBASE +
-			port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CFG_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
+		      port * CFG_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
 		break;
 	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  (CFG_PCIE_MEMBASE +
-			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CFG_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CFG_PCIE_MEMBASE +
+		      port * CFG_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
 		break;
+#if CFG_PCIE_NR_PORTS > 2
 	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  (CFG_PCIE_MEMBASE +
-			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CFG_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CFG_PCIE_MEMBASE +
+		      port * CFG_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
 		break;
+#endif
 	}
 
-	/* Set up 16GB inbound memory window at 0 */
+	/* Set up 64MB inbound memory window at 0 */
 	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
 	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
-	out_le32(mbase + PECFG_BAR0LMPA, 0);
-	out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
-	out_le32(mbase + PECFG_PIM0LAH, 0x00000004);	/* pointing to SRAM */
+
+	out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
+	out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
+
+	/* Setup BAR0 */
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
+	out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
+
+	/* Disable BAR1 & BAR2 */
+	out_le32(mbase + PECFG_BAR1MPA, 0);
+	out_le32(mbase + PECFG_BAR2HMPA, 0);
+	out_le32(mbase + PECFG_BAR2LMPA, 0);
+
+	out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CFG_PCIE_INBOUND_BASE));
+	out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CFG_PCIE_INBOUND_BASE));
 	out_le32(mbase + PECFG_PIMEN, 0x1);
 
 	/* Enable I/O, Mem, and Busmaster cycles */
 	out_le16((u16 *)(mbase + PCI_COMMAND),
-		in_le16((u16 *)(mbase + PCI_COMMAND)) |
-		PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	out_le16(mbase + 0x200,0xcaad);			/* Setting vendor ID */
-	out_le16(mbase + 0x202,0xfeed);			/* Setting device ID */
+		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	out_le16(mbase + 0x200, 0xcaad);		/* Setting vendor ID */
+	out_le16(mbase + 0x202, 0xfeed);		/* Setting device ID */
+
+	/* Set Class Code to Processor/PPC */
+	out_le32(mbase + 0x208, 0x0b200001);
+
 	attempts = 10;
-	switch (port) {
-	case 0:
-		while (!(SDR_READ(PESDR0_RCSSTS) & (1 << 8))) {
-			if (!(attempts--)) {
-				printf("PCIE0: BMEN is  not active\n");
-				return -1;
-			}
-			mdelay(1000);
-		}
-		break;
-	case 1:
-		while (!(SDR_READ(PESDR1_RCSSTS) & (1 << 8))) {
-			if (!(attempts--)) {
-				printf("PCIE1: BMEN is not active\n");
-				return -1;
-			}
-			mdelay(1000);
-		}
-		break;
-	case 2:
-		while (!(SDR_READ(PESDR2_RCSSTS) & (1 << 8))) {
-			if (!(attempts--)) {
-				printf("PCIE2: BMEN is  not active\n");
-				return -1;
-			}
-			mdelay(1000);
+	while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
+		if (!(attempts--)) {
+			printf("PCIE%d: BME not active\n", port);
+			return -1;
 		}
-		break;
+		mdelay(1000);
 	}
-	printf("PCIE:%d successfully set as endpoint\n",port);
+
+	printf("PCIE%d: successfully set as endpoint\n", port);
 
 	return 0;
 }
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/4xx_uart.c
index 60712b151..ac2b12b87 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/4xx_uart.c
@@ -20,7 +20,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-/*------------------------------------------------------------------------------+ */
+
 /*
  * This source code has been made available to you by IBM on an AS-IS
  * basis.  Anyone receiving this source is licensed under IBM
@@ -40,14 +40,11 @@
  * COPYRIGHT   I B M   CORPORATION 1995
  * LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
  */
-/*------------------------------------------------------------------------------- */
-/*
- * Travis Sawyer 15 September 2004
- *    Added CONFIG_SERIAL_MULTI support
- */
+
 #include <common.h>
 #include <commproc.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <watchdog.h>
 #include "vecnum.h"
 
@@ -61,212 +58,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/*****************************************************************************/
-#ifdef CONFIG_IOP480
-
-#define SPU_BASE         0x40000000
-
-#define spu_LineStat_rc  0x00	/* Line Status Register (Read/Clear) */
-#define spu_LineStat_w   0x04	/* Line Status Register (Set) */
-#define spu_Handshk_rc   0x08	/* Handshake Status Register (Read/Clear) */
-#define spu_Handshk_w    0x0c	/* Handshake Status Register (Set) */
-#define spu_BRateDivh    0x10	/* Baud rate divisor high */
-#define spu_BRateDivl    0x14	/* Baud rate divisor low */
-#define spu_CtlReg       0x18	/* Control Register */
-#define spu_RxCmd        0x1c	/* Rx Command Register */
-#define spu_TxCmd        0x20	/* Tx Command Register */
-#define spu_RxBuff       0x24	/* Rx data buffer */
-#define spu_TxBuff       0x24	/* Tx data buffer */
-
-/*-----------------------------------------------------------------------------+
-  | Line Status Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncLSRport1           0x40000000
-#define asyncLSRport1set        0x40000004
-#define asyncLSRDataReady             0x80
-#define asyncLSRFramingError          0x40
-#define asyncLSROverrunError          0x20
-#define asyncLSRParityError           0x10
-#define asyncLSRBreakInterrupt        0x08
-#define asyncLSRTxHoldEmpty           0x04
-#define asyncLSRTxShiftEmpty          0x02
-
-/*-----------------------------------------------------------------------------+
-  | Handshake Status Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncHSRport1           0x40000008
-#define asyncHSRport1set        0x4000000c
-#define asyncHSRDsr                   0x80
-#define asyncLSRCts                   0x40
-
-/*-----------------------------------------------------------------------------+
-  | Control Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncCRport1            0x40000018
-#define asyncCRNormal                 0x00
-#define asyncCRLoopback               0x40
-#define asyncCRAutoEcho               0x80
-#define asyncCRDtr                    0x20
-#define asyncCRRts                    0x10
-#define asyncCRWordLength7            0x00
-#define asyncCRWordLength8            0x08
-#define asyncCRParityDisable          0x00
-#define asyncCRParityEnable           0x04
-#define asyncCREvenParity             0x00
-#define asyncCROddParity              0x02
-#define asyncCRStopBitsOne            0x00
-#define asyncCRStopBitsTwo            0x01
-#define asyncCRDisableDtrRts          0x00
-
-/*-----------------------------------------------------------------------------+
-  | Receiver Command Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncRCRport1           0x4000001c
-#define asyncRCRDisable               0x00
-#define asyncRCREnable                0x80
-#define asyncRCRIntDisable            0x00
-#define asyncRCRIntEnabled            0x20
-#define asyncRCRDMACh2                0x40
-#define asyncRCRDMACh3                0x60
-#define asyncRCRErrorInt              0x10
-#define asyncRCRPauseEnable           0x08
-
-/*-----------------------------------------------------------------------------+
-  | Transmitter Command Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncTCRport1           0x40000020
-#define asyncTCRDisable               0x00
-#define asyncTCREnable                0x80
-#define asyncTCRIntDisable            0x00
-#define asyncTCRIntEnabled            0x20
-#define asyncTCRDMACh2                0x40
-#define asyncTCRDMACh3                0x60
-#define asyncTCRTxEmpty               0x10
-#define asyncTCRErrorInt              0x08
-#define asyncTCRStopPause             0x04
-#define asyncTCRBreakGen              0x02
-
-/*-----------------------------------------------------------------------------+
-  | Miscellanies defines.
-  +-----------------------------------------------------------------------------*/
-#define asyncTxBufferport1      0x40000024
-#define asyncRxBufferport1      0x40000024
-#define asyncDLABLsbport1       0x40000014
-#define asyncDLABMsbport1       0x40000010
-#define asyncXOFFchar                 0x13
-#define asyncXONchar                  0x11
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-int serial_init (void)
-{
-	volatile char val;
-	unsigned short br_reg;
-
-	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
-	/*
-	 * Init onboard UART
-	 */
-	out8 (SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
-	out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
-	out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
-	out8 (SPU_BASE + spu_CtlReg, 0x08);	/* Set 8 bits, no parity and 1 stop bit */
-	out8 (SPU_BASE + spu_RxCmd, 0xb0);	/* Enable Rx */
-	out8 (SPU_BASE + spu_TxCmd, 0x9c);	/* Enable Tx */
-	out8 (SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
-	val = in8 (SPU_BASE + spu_RxBuff);	/* Dummy read, to clear receiver */
-
-	return (0);
-}
-
-void serial_setbrg (void)
-{
-	unsigned short br_reg;
-
-	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
-	out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
-	out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
-}
-
-void serial_putc (const char c)
-{
-	if (c == '\n')
-		serial_putc ('\r');
-
-	/* load status from handshake register */
-	if (in8 (SPU_BASE + spu_Handshk_rc) != 00)
-		out8 (SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
-
-	out8 (SPU_BASE + spu_TxBuff, c);	/* Put char */
-
-	while ((in8 (SPU_BASE + spu_LineStat_rc) & 04) != 04) {
-		if (in8 (SPU_BASE + spu_Handshk_rc) != 00)
-			out8 (SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
-	}
-}
-
-void serial_puts (const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-int serial_getc ()
-{
-	unsigned char status = 0;
-
-	while (1) {
-		status = in8 (asyncLSRport1);
-		if ((status & asyncLSRDataReady) != 0x0) {
-			break;
-		}
-		if ((status & ( asyncLSRFramingError |
-				asyncLSROverrunError |
-				asyncLSRParityError  |
-				asyncLSRBreakInterrupt )) != 0) {
-			(void) out8 (asyncLSRport1,
-				     asyncLSRFramingError |
-				     asyncLSROverrunError |
-				     asyncLSRParityError  |
-				     asyncLSRBreakInterrupt );
-		}
-	}
-	return (0x000000ff & (int) in8 (asyncRxBufferport1));
-}
-
-int serial_tstc ()
-{
-	unsigned char status;
-
-	status = in8 (asyncLSRport1);
-	if ((status & asyncLSRDataReady) != 0x0) {
-		return (1);
-	}
-	if ((status & ( asyncLSRFramingError |
-			asyncLSROverrunError |
-			asyncLSRParityError  |
-			asyncLSRBreakInterrupt )) != 0) {
-		(void) out8 (asyncLSRport1,
-			     asyncLSRFramingError |
-			     asyncLSROverrunError |
-			     asyncLSRParityError  |
-			     asyncLSRBreakInterrupt);
-	}
-	return 0;
-}
-
-#endif	/* CONFIG_IOP480 */
-
-/*****************************************************************************/
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
-    defined(CONFIG_440)
+    defined(CONFIG_405EX) || defined(CONFIG_440)
 
 #if defined(CONFIG_440)
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
@@ -318,6 +112,15 @@ int serial_tstc ()
 #define UCR0_UDIV_POS   0
 #define UCR1_UDIV_POS   8
 #define UDIV_MAX        127
+#elif defined(CONFIG_405EX)
+#define UART0_BASE	0xef600200
+#define UART1_BASE	0xef600300
+#define CR0_MASK	0x000000ff
+#define CR0_EXTCLK_ENA	0x00800000
+#define CR0_UDIV_POS	0
+#define UDIV_SUBTRACT	0
+#define UART0_SDR	sdr_uart0
+#define UART1_SDR	sdr_uart1
 #else /* CONFIG_405GP || CONFIG_405CR */
 #define UART0_BASE      0xef600300
 #define UART1_BASE      0xef600400
@@ -336,12 +139,6 @@ int serial_tstc ()
 #define ACTING_UART1_BASE	UART1_BASE
 #endif
 
-#if defined(CONFIG_SERIAL_MULTI)
-#define UART_BASE	dev_base
-#else
-#define UART_BASE	ACTING_UART0_BASE
-#endif
-
 #if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
 #error "External serial clock not supported on AMCC PPC405EP!"
 #endif
@@ -362,7 +159,6 @@ int serial_tstc ()
 /*-----------------------------------------------------------------------------+
   | Line Status Register.
   +-----------------------------------------------------------------------------*/
-/*#define asyncLSRport1           ACTING_UART0_BASE+0x05 */
 #define asyncLSRDataReady1            0x01
 #define asyncLSROverrunError1         0x02
 #define asyncLSRParityError1          0x04
@@ -372,12 +168,6 @@ int serial_tstc ()
 #define asyncLSRTxShiftEmpty1         0x40
 #define asyncLSRRxFifoError1          0x80
 
-/*-----------------------------------------------------------------------------+
-  | Miscellanies defines.
-  +-----------------------------------------------------------------------------*/
-/*#define asyncTxBufferport1      ACTING_UART0_BASE+0x00 */
-/*#define asyncRxBufferport1      ACTING_UART0_BASE+0x00 */
-
 #ifdef CONFIG_SERIAL_SOFTWARE_FIFO
 /*-----------------------------------------------------------------------------+
   | Fifo
@@ -391,7 +181,36 @@ typedef struct {
 volatile static serial_buffer_t buf_info;
 #endif
 
-#if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK)
+static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
+{
+	PPC4xx_SYS_INFO sys_info;
+	u8 val;
+
+	get_sys_info(&sys_info);
+
+	/* Correct UART frequency in bd-info struct now that
+	 * the UART divisor is available
+	 */
+#ifdef CFG_EXT_SERIAL_CLOCK
+	gd->uart_clk = CFG_EXT_SERIAL_CLOCK;
+#else
+	gd->uart_clk = sys_info.freqUART / udiv;
+#endif
+
+	out_8((u8 *)base + UART_LCR, 0x80);	/* set DLAB bit */
+	out_8((u8 *)base + UART_DLL, bdiv);	/* set baudrate divisor */
+	out_8((u8 *)base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+	out_8((u8 *)base + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
+	out_8((u8 *)base + UART_FCR, 0x00);	/* disable FIFO */
+	out_8((u8 *)base + UART_MCR, 0x00);	/* no modem control DTR RTS */
+	val = in_8((u8 *)base + UART_LSR);	/* clear line status */
+	val = in_8((u8 *)base + UART_RBR);	/* read receive buffer */
+	out_8((u8 *)base + UART_SCR, 0x00);	/* set scratchpad */
+	out_8((u8 *)base + UART_IER, 0x00);	/* set interrupt enable reg */
+}
+
+#if (defined(CONFIG_440) || defined(CONFIG_405EX)) &&	\
+    !defined(CFG_EXT_SERIAL_CLOCK)
 static void serial_divs (int baudrate, unsigned long *pudiv,
 			 unsigned short *pbdiv)
 {
@@ -457,8 +276,8 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
 	get_sys_info(&sysinfo);
 
 	plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
-		sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) * sysinfo.pllFbkDiv) /
-		sysinfo.pllFwdDivB);
+					   sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) *
+		    sysinfo.pllFbkDiv) / sysinfo.pllFwdDivB);
 	udiv = 256;			/* Assume lowest possible serial clk */
 	div = plloutb / (16 * baudrate); /* total divisor */
 	umin = (plloutb / get_OPB_freq()) << 1;	/* 2 x OPB divisor */
@@ -496,16 +315,11 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
  */
 
 #if defined(CONFIG_440)
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_init_dev (unsigned long dev_base)
-#else
-int serial_init(void)
-#endif
+int serial_init_dev(unsigned long base)
 {
 	unsigned long reg;
 	unsigned long udiv;
 	unsigned short bdiv;
-	volatile char val;
 #ifdef CFG_EXT_SERIAL_CLOCK
 	unsigned long tmp;
 #endif
@@ -543,36 +357,46 @@ int serial_init(void)
 	MTREG(UART3_SDR, reg);
 #endif
 
-	out8(UART_BASE + UART_LCR, 0x80);	/* set DLAB bit */
-	out8(UART_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
-	out8(UART_BASE + UART_DLM, bdiv >> 8);	/* set baudrate divisor */
-	out8(UART_BASE + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
-	out8(UART_BASE + UART_FCR, 0x00);	/* disable FIFO */
-	out8(UART_BASE + UART_MCR, 0x00);	/* no modem control DTR RTS */
-	val = in8(UART_BASE + UART_LSR);	/* clear line status */
-	val = in8(UART_BASE + UART_RBR);	/* read receive buffer */
-	out8(UART_BASE + UART_SCR, 0x00);	/* set scratchpad */
-	out8(UART_BASE + UART_IER, 0x00);	/* set interrupt enable reg */
+	serial_init_common(base, udiv, bdiv);
 
 	return (0);
 }
 
 #else /* !defined(CONFIG_440) */
 
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_init_dev (unsigned long dev_base)
-#else
-int serial_init (void)
-#endif
+int serial_init_dev (unsigned long base)
 {
 	unsigned long reg;
 	unsigned long tmp;
 	unsigned long clk;
 	unsigned long udiv;
 	unsigned short bdiv;
-	volatile char val;
 
-#if defined(CONFIG_405EZ)
+#ifdef CONFIG_405EX
+	clk = tmp = 0;
+	mfsdr(UART0_SDR, reg);
+	reg &= ~CR0_MASK;
+#ifdef CFG_EXT_SERIAL_CLOCK
+	reg |= CR0_EXTCLK_ENA;
+	udiv = 1;
+	tmp  = gd->baudrate * 16;
+	bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+	serial_divs(gd->baudrate, &udiv, &bdiv);
+#endif
+	reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS;  /* set the UART divisor */
+
+	/*
+	 * Configure input clock to baudrate generator for all
+	 * available serial ports here
+	 */
+	mtsdr(UART0_SDR, reg);
+
+#if defined(UART1_SDR)
+	mtsdr(UART1_SDR, reg);
+#endif
+
+#elif defined(CONFIG_405EZ)
 	serial_divs(gd->baudrate, &udiv, &bdiv);
 	clk = tmp = reg = 0;
 #else
@@ -608,81 +432,44 @@ int serial_init (void)
 #endif /* CONFIG_405EP */
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;
-#endif /* CONFIG_405EZ */
-
-	out8(UART_BASE + UART_LCR, 0x80);	/* set DLAB bit */
-	out8(UART_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
-	out8(UART_BASE + UART_DLM, bdiv >> 8);	/* set baudrate divisor */
-	out8(UART_BASE + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
-	out8(UART_BASE + UART_FCR, 0x00);	/* disable FIFO */
-	out8(UART_BASE + UART_MCR, 0x00);	/* no modem control DTR RTS */
-	val = in8(UART_BASE + UART_LSR);	/* clear line status */
-	val = in8(UART_BASE + UART_RBR);	/* read receive buffer */
-	out8(UART_BASE + UART_SCR, 0x00);	/* set scratchpad */
-	out8(UART_BASE + UART_IER, 0x00);	/* set interrupt enable reg */
+#endif /* CONFIG_405EX */
+
+	serial_init_common(base, udiv, bdiv);
 
 	return (0);
 }
 
 #endif /* if defined(CONFIG_440) */
 
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_setbrg_dev (unsigned long dev_base)
-#else
-void serial_setbrg (void)
-#endif
+void serial_setbrg_dev(unsigned long base)
 {
-#if defined(CONFIG_SERIAL_MULTI)
-	serial_init_dev(dev_base);
-#else
-	serial_init();
-#endif
+	serial_init_dev(base);
 }
 
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_putc_dev (unsigned long dev_base, const char c)
-#else
-void serial_putc (const char c)
-#endif
+void serial_putc_dev(unsigned long base, const char c)
 {
 	int i;
 
 	if (c == '\n')
-#if defined(CONFIG_SERIAL_MULTI)
-		serial_putc_dev (dev_base, '\r');
-#else
-		serial_putc ('\r');
-#endif
+		serial_putc_dev(base, '\r');
 
 	/* check THRE bit, wait for transmiter available */
 	for (i = 1; i < 3500; i++) {
-		if ((in8 (UART_BASE + UART_LSR) & 0x20) == 0x20)
+		if ((in_8((u8 *)base + UART_LSR) & 0x20) == 0x20)
 			break;
 		udelay (100);
 	}
-	out8 (UART_BASE + UART_THR, c);	/* put character out */
+
+	out_8((u8 *)base + UART_THR, c);	/* put character out */
 }
 
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_puts_dev (unsigned long dev_base, const char *s)
-#else
-void serial_puts (const char *s)
-#endif
+void serial_puts_dev (unsigned long base, const char *s)
 {
-	while (*s) {
-#if defined(CONFIG_SERIAL_MULTI)
-		serial_putc_dev (dev_base, *s++);
-#else
-		serial_putc (*s++);
-#endif
-	}
+	while (*s)
+		serial_putc_dev (base, *s++);
 }
 
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_getc_dev (unsigned long dev_base)
-#else
-int serial_getc (void)
-#endif
+int serial_getc_dev (unsigned long base)
 {
 	unsigned char status = 0;
 
@@ -690,46 +477,45 @@ int serial_getc (void)
 #if defined(CONFIG_HW_WATCHDOG)
 		WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
 #endif	/* CONFIG_HW_WATCHDOG */
-		status = in8 (UART_BASE + UART_LSR);
-		if ((status & asyncLSRDataReady1) != 0x0) {
+
+		status = in_8((u8 *)base + UART_LSR);
+		if ((status & asyncLSRDataReady1) != 0x0)
 			break;
-		}
+
 		if ((status & ( asyncLSRFramingError1 |
 				asyncLSROverrunError1 |
 				asyncLSRParityError1  |
 				asyncLSRBreakInterrupt1 )) != 0) {
-			out8 (UART_BASE + UART_LSR,
+			out_8((u8 *)base + UART_LSR,
 			      asyncLSRFramingError1 |
 			      asyncLSROverrunError1 |
 			      asyncLSRParityError1  |
 			      asyncLSRBreakInterrupt1);
 		}
 	}
-	return (0x000000ff & (int) in8 (UART_BASE));
+
+	return (0x000000ff & (int) in_8((u8 *)base));
 }
 
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_tstc_dev (unsigned long dev_base)
-#else
-int serial_tstc (void)
-#endif
+int serial_tstc_dev (unsigned long base)
 {
 	unsigned char status;
 
-	status = in8 (UART_BASE + UART_LSR);
-	if ((status & asyncLSRDataReady1) != 0x0) {
+	status = in_8((u8 *)base + UART_LSR);
+	if ((status & asyncLSRDataReady1) != 0x0)
 		return (1);
-	}
+
 	if ((status & ( asyncLSRFramingError1 |
 			asyncLSROverrunError1 |
 			asyncLSRParityError1  |
 			asyncLSRBreakInterrupt1 )) != 0) {
-		out8 (UART_BASE + UART_LSR,
+		out_8((u8 *)base + UART_LSR,
 		      asyncLSRFramingError1 |
 		      asyncLSROverrunError1 |
 		      asyncLSRParityError1  |
 		      asyncLSRBreakInterrupt1);
 	}
+
 	return 0;
 }
 
@@ -742,11 +528,11 @@ void serial_isr (void *arg)
 	const int rx_get = buf_info.rx_get;
 	int rx_put = buf_info.rx_put;
 
-	if (rx_get <= rx_put) {
+	if (rx_get <= rx_put)
 		space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
-	} else {
+	else
 		space = rx_get - rx_put;
-	}
+
 	while (serial_tstc_dev (ACTING_UART0_BASE)) {
 		c = serial_getc_dev (ACTING_UART0_BASE);
 		if (space) {
@@ -757,8 +543,9 @@ void serial_isr (void *arg)
 			rx_put = 0;
 		if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
 			/* Stop flow by setting RTS inactive */
-			out8 (ACTING_UART0_BASE + UART_MCR,
-			      in8 (ACTING_UART0_BASE + UART_MCR) & (0xFF ^ 0x02));
+			out_8((u8 *)ACTING_UART0_BASE + UART_MCR,
+			      in_8((u8 *)ACTING_UART0_BASE + UART_MCR) &
+			      (0xFF ^ 0x02));
 		}
 	}
 	buf_info.rx_put = rx_put;
@@ -771,35 +558,35 @@ void serial_buffered_init (void)
 	buf_info.rx_put = 0;
 	buf_info.rx_get = 0;
 
-	if (in8 (ACTING_UART0_BASE + UART_MSR) & 0x10) {
+	if (in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)
 		serial_puts ("Check CTS signal present on serial port: OK.\n");
-	} else {
+	else
 		serial_puts ("WARNING: CTS signal not present on serial port.\n");
-	}
 
 	irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
 			      serial_isr /*interrupt_handler_t *handler */ ,
 			      (void *) &buf_info /*void *arg */ );
 
 	/* Enable "RX Data Available" Interrupt on UART */
-	/* out8(ACTING_UART0_BASE + UART_IER, in8(ACTING_UART0_BASE + UART_IER) |0x01); */
-	out8 (ACTING_UART0_BASE + UART_IER, 0x01);
+	out_8(ACTING_UART0_BASE + UART_IER, 0x01);
 	/* Set DTR active */
-	out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x01);
+	out_8(ACTING_UART0_BASE + UART_MCR,
+	      in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x01);
 	/* Start flow by setting RTS active */
-	out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x02);
+	out_8(ACTING_UART0_BASE + UART_MCR,
+	      in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
 	/* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
-	out8 (ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
+	out_8(ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
 }
 
 void serial_buffered_putc (const char c)
 {
 	/* Wait for CTS */
 #if defined(CONFIG_HW_WATCHDOG)
-	while (!(in8 (ACTING_UART0_BASE + UART_MSR) & 0x10))
+	while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10))
 		WATCHDOG_RESET ();
 #else
-	while (!(in8 (ACTING_UART0_BASE + UART_MSR) & 0x10));
+	while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10));
 #endif
 	serial_putc (c);
 }
@@ -828,14 +615,15 @@ int serial_buffered_getc (void)
 	buf_info.rx_get = rx_get;
 
 	rx_put = buf_info.rx_put;
-	if (rx_get <= rx_put) {
+	if (rx_get <= rx_put)
 		space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
-	} else {
+	else
 		space = rx_get - rx_put;
-	}
+
 	if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
 		/* Start flow by setting RTS active */
-		out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x02);
+		out_8(ACTING_UART0_BASE + UART_MCR,
+		      in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
 	}
 
 	return c;
@@ -860,8 +648,8 @@ int serial_buffered_tstc (void)
 #if (CONFIG_KGDB_SER_INDEX & 2)
 void kgdb_serial_init (void)
 {
-	volatile char val;
-	unsigned short br_reg;
+	u8 val;
+	u16 br_reg;
 
 	get_clocks ();
 	br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) +
@@ -869,16 +657,16 @@ void kgdb_serial_init (void)
 	/*
 	 * Init onboard 16550 UART
 	 */
-	out8 (ACTING_UART1_BASE + UART_LCR, 0x80);	/* set DLAB bit */
-	out8 (ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff));	/* set divisor for 9600 baud */
-	out8 (ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8));	/* set divisor for 9600 baud */
-	out8 (ACTING_UART1_BASE + UART_LCR, 0x03);	/* line control 8 bits no parity */
-	out8 (ACTING_UART1_BASE + UART_FCR, 0x00);	/* disable FIFO */
-	out8 (ACTING_UART1_BASE + UART_MCR, 0x00);	/* no modem control DTR RTS */
-	val = in8 (ACTING_UART1_BASE + UART_LSR);	/* clear line status */
-	val = in8 (ACTING_UART1_BASE + UART_RBR);	/* read receive buffer */
-	out8 (ACTING_UART1_BASE + UART_SCR, 0x00);	/* set scratchpad */
-	out8 (ACTING_UART1_BASE + UART_IER, 0x00);	/* set interrupt enable reg */
+	out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x80);	/* set DLAB bit */
+	out_8((u8 *)ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
+	out_8((u8 *)ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
+	out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x03);	/* line control 8 bits no parity */
+	out_8((u8 *)ACTING_UART1_BASE + UART_FCR, 0x00);	/* disable FIFO */
+	out_8((u8 *)ACTING_UART1_BASE + UART_MCR, 0x00);	/* no modem control DTR RTS */
+	val = in_8((u8 *)ACTING_UART1_BASE + UART_LSR);		/* clear line status */
+	val = in_8((u8 *)ACTING_UART1_BASE + UART_RBR);		/* read receive buffer */
+	out_8((u8 *)ACTING_UART1_BASE + UART_SCR, 0x00);	/* set scratchpad */
+	out_8((u8 *)ACTING_UART1_BASE + UART_IER, 0x00);	/* set interrupt enable reg */
 }
 
 void putDebugChar (const char c)
@@ -886,17 +674,16 @@ void putDebugChar (const char c)
 	if (c == '\n')
 		serial_putc ('\r');
 
-	out8 (ACTING_UART1_BASE + UART_THR, c);	/* put character out */
+	out_8((u8 *)ACTING_UART1_BASE + UART_THR, c);	/* put character out */
 
 	/* check THRE bit, wait for transfer done */
-	while ((in8 (ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
+	while ((in_8((u8 *)ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
 }
 
 void putDebugStr (const char *s)
 {
-	while (*s) {
+	while (*s)
 		serial_putc (*s++);
-	}
 }
 
 int getDebugChar (void)
@@ -904,22 +691,23 @@ int getDebugChar (void)
 	unsigned char status = 0;
 
 	while (1) {
-		status = in8 (ACTING_UART1_BASE + UART_LSR);
-		if ((status & asyncLSRDataReady1) != 0x0) {
+		status = in_8((u8 *)ACTING_UART1_BASE + UART_LSR);
+		if ((status & asyncLSRDataReady1) != 0x0)
 			break;
-		}
-		if ((status & ( asyncLSRFramingError1 |
-				asyncLSROverrunError1 |
-				asyncLSRParityError1  |
-				asyncLSRBreakInterrupt1 )) != 0) {
-			out8 (ACTING_UART1_BASE + UART_LSR,
+
+		if ((status & (asyncLSRFramingError1 |
+			       asyncLSROverrunError1 |
+			       asyncLSRParityError1  |
+			       asyncLSRBreakInterrupt1 )) != 0) {
+			out_8((u8 *)ACTING_UART1_BASE + UART_LSR,
 			      asyncLSRFramingError1 |
 			      asyncLSROverrunError1 |
 			      asyncLSRParityError1  |
 			      asyncLSRBreakInterrupt1);
 		}
 	}
-	return (0x000000ff & (int) in8 (ACTING_UART1_BASE));
+
+	return (0x000000ff & (int) in_8((u8 *)ACTING_UART1_BASE));
 }
 
 void kgdb_interruptible (int yes)
@@ -967,10 +755,12 @@ int serial1_init(void)
 {
 	return (serial_init_dev(UART1_BASE));
 }
+
 void serial0_setbrg (void)
 {
 	serial_setbrg_dev(UART0_BASE);
 }
+
 void serial1_setbrg (void)
 {
 	serial_setbrg_dev(UART1_BASE);
@@ -985,6 +775,7 @@ void serial1_putc(const char c)
 {
 	serial_putc_dev(UART1_BASE, c);
 }
+
 void serial0_puts(const char *s)
 {
 	serial_puts_dev(UART0_BASE, s);
@@ -1004,6 +795,7 @@ int serial1_getc(void)
 {
 	return(serial_getc_dev(UART1_BASE));
 }
+
 int serial0_tstc(void)
 {
 	return (serial_tstc_dev(UART0_BASE));
@@ -1037,6 +829,39 @@ struct serial_device serial1_device =
 	serial1_putc,
 	serial1_puts,
 };
+#else
+/*
+ * Wrapper functions
+ */
+int serial_init(void)
+{
+	return serial_init_dev(ACTING_UART0_BASE);
+}
+
+void serial_setbrg(void)
+{
+	serial_setbrg_dev(ACTING_UART0_BASE);
+}
+
+void serial_putc(const char c)
+{
+	serial_putc_dev(ACTING_UART0_BASE, c);
+}
+
+void serial_puts(const char *s)
+{
+	serial_puts_dev(ACTING_UART0_BASE, s);
+}
+
+int serial_getc(void)
+{
+	return serial_getc_dev(ACTING_UART0_BASE);
+}
+
+int serial_tstc(void)
+{
+	return serial_tstc_dev(ACTING_UART0_BASE);
+}
 #endif /* CONFIG_SERIAL_MULTI */
 
 #endif	/* CONFIG_405GP || CONFIG_405CR */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index af9da5b95..178c5c674 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -25,15 +25,40 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).a
 
-START	= start.o resetvec.o kgdb.o
-SOBJS	= dcr.o
-COBJS	= 405gp_pci.o 440spe_pcie.o 4xx_enet.o \
-	  bedbug_405.o commproc.o \
-	  cpu.o cpu_init.o gpio.o i2c.o interrupts.o \
-	  miiphy.o ndfc.o sdram.o serial.o \
-	  40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
-	  tlb.o traps.o usb_ohci.o usb.o usbdev.o \
-	  440spe_pcie.o
+START	:= resetvec.o
+START	+= start.o
+
+SOBJS	:= cache.o
+SOBJS	+= dcr.o
+SOBJS	+= kgdb.o
+
+COBJS	:= 40x_spd_sdram.o
+COBJS	+= 44x_spd_ddr.o
+COBJS	+= 44x_spd_ddr2.o
+COBJS	+= 4xx_enet.o
+COBJS	+= 4xx_pci.o
+COBJS	+= 4xx_pcie.o
+COBJS	+= 4xx_uart.o
+COBJS	+= bedbug_405.o
+COBJS	+= commproc.o
+COBJS	+= cpu.o
+COBJS	+= cpu_init.o
+COBJS	+= denali_data_eye.o
+COBJS	+= denali_spd_ddr2.o
+COBJS	+= fdt.o
+COBJS	+= gpio.o
+COBJS	+= i2c.o
+COBJS	+= interrupts.o
+COBJS	+= iop480_uart.o
+COBJS	+= miiphy.o
+COBJS	+= ndfc.o
+COBJS	+= sdram.o
+COBJS	+= speed.o
+COBJS	+= tlb.o
+COBJS	+= traps.o
+COBJS	+= usb.o
+COBJS	+= usb_ohci.o
+COBJS	+= usbdev.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/ppc4xx/cache.S b/cpu/ppc4xx/cache.S
new file mode 100644
index 000000000..5124dec77
--- /dev/null
+++ b/cpu/ppc4xx/cache.S
@@ -0,0 +1,233 @@
+/*
+ * This file contains miscellaneous low-level functions.
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <config.h>
+#include <config.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/*
+ * Flush instruction cache.
+ */
+_GLOBAL(invalidate_icache)
+	iccci	r0,r0
+	isync
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_BYTES
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+
+1:	dcbf	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+
+1:	dcbi	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+/*
+ * 40x cores have 8K or 16K dcache and 32 byte line size.
+ * 44x has a 32K dcache and 32 byte line size.
+ * 8xx has 1, 2, 4, 8K variants.
+ * For now, cover the worst case of the 44x.
+ * Must be called with external interrupts disabled.
+ */
+#define CACHE_NWAYS     64
+#define CACHE_NLINES    32
+
+_GLOBAL(flush_dcache)
+	li	r4,(2 * CACHE_NWAYS * CACHE_NLINES)
+	mtctr	r4
+	lis	r5,0
+1:	lwz	r3,0(r5)		/* Load one word from every line */
+	addi	r5,r5,L1_CACHE_BYTES
+	bdnz	1b
+	sync
+	blr
+
+_GLOBAL(invalidate_dcache)
+	addi	r6,0,0x0000		/* clear GPR 6 */
+	/* Do loop for # of dcache congruence classes. */
+	lis	r7,(CFG_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha	/* TBS for large sized cache */
+	ori	r7,r7,(CFG_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
+					/* NOTE: dccci invalidates both */
+	mtctr	r7			/* ways in the D cache */
+..dcloop:
+	dccci	0,r6			/* invalidate line */
+	addi	r6,r6,L1_CACHE_BYTES	/* bump to next line */
+	bdnz	..dcloop
+	sync
+	blr
+
+/*
+ * Cache functions.
+ *
+ * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
+ * although for some cache-ralated calls stubs have to be provided to satisfy
+ * symbols resolution.
+ * Icache-related functions are used in POST framework.
+ *
+ */
+#ifdef CONFIG_440
+
+       .globl  dcache_disable
+       .globl  icache_disable
+       .globl  icache_enable
+dcache_disable:
+icache_disable:
+icache_enable:
+	blr
+
+	.globl	dcache_status
+	.globl	icache_status
+dcache_status:
+icache_status:
+	mr	r3,  0
+	blr
+
+#else /* CONFIG_440 */
+
+	.globl	icache_enable
+icache_enable:
+	mflr	r8
+	bl	invalidate_icache
+	mtlr	r8
+	isync
+	addis	r3,r0, 0xc000	      /* set bit 0 */
+	mticcr	r3
+	blr
+
+	.globl	icache_disable
+icache_disable:
+	addis	r3,r0, 0x0000	      /* clear bit 0 */
+	mticcr	r3
+	isync
+	blr
+
+	.globl	icache_status
+icache_status:
+	mficcr	r3
+	srwi	r3, r3, 31	/* >>31 => select bit 0 */
+	blr
+
+	.globl	dcache_enable
+dcache_enable:
+	mflr	r8
+	bl	invalidate_dcache
+	mtlr	r8
+	isync
+	addis	r3,r0, 0x8000	      /* set bit 0 */
+	mtdccr	r3
+	blr
+
+	.globl	dcache_disable
+dcache_disable:
+	mflr	r8
+	bl	flush_dcache
+	mtlr	r8
+	addis	r3,r0, 0x0000	      /* clear bit 0 */
+	mtdccr	r3
+	blr
+
+	.globl	dcache_status
+dcache_status:
+	mfdccr	r3
+	srwi	r3, r3, 31	/* >>31 => select bit 0 */
+	blr
+
+#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index c07bc0c32..9e9c685af 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2006
+ * (C) Copyright 2000-2007
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,22 +37,9 @@
 #include <asm/cache.h>
 #include <ppc4xx.h>
 
-#if !defined(CONFIG_405)
 DECLARE_GLOBAL_DATA_PTR;
-#endif
 
-#if defined(CONFIG_BOARD_RESET)
 void board_reset(void);
-#endif
-
-#if defined(CONFIG_440)
-#define FREQ_EBC		(sys_info.freqEPB)
-#elif defined(CONFIG_405EZ)
-#define FREQ_EBC		((CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / \
-				 sys_info.pllExtBusDiv)
-#else
-#define FREQ_EBC		(sys_info.freqPLB / sys_info.pllExtBusDiv)
-#endif
 
 #if defined(CONFIG_405GP) || \
     defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
@@ -60,7 +47,7 @@ void board_reset(void);
 
 #define PCI_ASYNC
 
-int pci_async_enabled(void)
+static int pci_async_enabled(void)
 {
 #if defined(CONFIG_405GP)
 	return (mfdcr(strap) & PSR_PCI_ASYNC_EN);
@@ -76,8 +63,9 @@ int pci_async_enabled(void)
 }
 #endif
 
-#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && !defined(CONFIG_405)
-int pci_arbiter_enabled(void)
+#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
+    !defined(CONFIG_405) && !defined(CONFIG_405EX)
+static int pci_arbiter_enabled(void)
 {
 #if defined(CONFIG_405GP)
 	return (mfdcr(strap) & PSR_PCI_ARBIT_EN);
@@ -107,14 +95,10 @@ int pci_arbiter_enabled(void)
 }
 #endif
 
-#if defined(CONFIG_405EP) || defined(CONFIG_440GX) || \
-    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-
+#if defined(CONFIG_405EP)
 #define I2C_BOOTROM
 
-int i2c_bootrom_enabled(void)
+static int i2c_bootrom_enabled(void)
 {
 #if defined(CONFIG_405EP)
 	return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
@@ -207,6 +191,21 @@ static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \
 				 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
 #endif
 
+#if defined(CONFIG_405EX)
+#define SDR0_PINSTP_SHIFT	29
+static char *bootstrap_str[] = {
+	"EBC (8 bits)",
+	"EBC (16 bits)",
+	"EBC (16 bits)",
+	"NAND (8 bits)",
+	"NAND (8 bits)",
+	"I2C (Addr 0x54)",
+	"EBC (8 bits)",
+	"I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
 #if defined(SDR0_PINSTP_SHIFT)
 static int bootstrap_option(void)
 {
@@ -219,7 +218,19 @@ static int bootstrap_option(void)
 
 
 #if defined(CONFIG_440)
-static int do_chip_reset(unsigned long sys0, unsigned long sys1);
+static int do_chip_reset (unsigned long sys0, unsigned long sys1)
+{
+	/* Changes to cpc0_sys0 and cpc0_sys1 require chip
+	 * reset.
+	 */
+	mtdcr (cntrl0, mfdcr (cntrl0) | 0x80000000);	/* Set SWE */
+	mtdcr (cpc0_sys0, sys0);
+	mtdcr (cpc0_sys1, sys1);
+	mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000);	/* Clr SWE */
+	mtspr (dbcr0, 0x20000000);	/* Reset the chip */
+
+	return 1;
+}
 #endif
 
 
@@ -241,7 +252,8 @@ int checkcpu (void)
 	puts("AMCC PowerPC 4");
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
-    defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_405EX)
 	puts("05");
 #endif
 #if defined(CONFIG_440)
@@ -293,6 +305,26 @@ int checkcpu (void)
 		puts("EZ Rev. A");
 		break;
 
+	case PVR_405EX1_RA:
+		puts("EX Rev. A");
+		strcpy(addstr, "Security support");
+		break;
+
+	case PVR_405EX2_RA:
+		puts("EX Rev. A");
+		strcpy(addstr, "No Security support");
+		break;
+
+	case PVR_405EXR1_RA:
+		puts("EXr Rev. A");
+		strcpy(addstr, "Security support");
+		break;
+
+	case PVR_405EXR2_RA:
+		puts("EXr Rev. A");
+		strcpy(addstr, "No Security support");
+		break;
+
 #if defined(CONFIG_440)
 	case PVR_440GP_RB:
 		puts("GP Rev. B");
@@ -424,7 +456,7 @@ int checkcpu (void)
 	printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
 		sys_info.freqPLB / 1000000,
 		get_OPB_freq() / 1000000,
-		FREQ_EBC / 1000000);
+		sys_info.freqEBC / 1000000);
 
 	if (addstr[0] != 0)
 		printf("       %s\n", addstr);
@@ -437,7 +469,7 @@ int checkcpu (void)
 	printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
 #endif	/* SDR0_PINSTP_SHIFT */
 
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
 	printf ("       Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
 #endif
 
@@ -450,11 +482,11 @@ int checkcpu (void)
 	}
 #endif
 
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
 	putc('\n');
 #endif
 
-#if defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
 	printf ("       16 kB I-Cache 16 kB D-Cache");
 #elif defined(CONFIG_440)
 	printf ("       32 kB I-Cache 32 kB D-Cache");
@@ -478,7 +510,6 @@ int checkcpu (void)
 	return 0;
 }
 
-#if defined (CONFIG_440SPE)
 int ppc440spe_revB() {
 	unsigned int pvr;
 
@@ -488,7 +519,6 @@ int ppc440spe_revB() {
 	else
 		return 0;
 }
-#endif
 
 /* ------------------------------------------------------------------------- */
 
@@ -510,22 +540,6 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 1;
 }
 
-#if defined(CONFIG_440)
-static int do_chip_reset (unsigned long sys0, unsigned long sys1)
-{
-	/* Changes to cpc0_sys0 and cpc0_sys1 require chip
-	 * reset.
-	 */
-	mtdcr (cntrl0, mfdcr (cntrl0) | 0x80000000);	/* Set SWE */
-	mtdcr (cpc0_sys0, sys0);
-	mtdcr (cpc0_sys1, sys1);
-	mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000);	/* Clr SWE */
-	mtspr (dbcr0, 0x20000000);	/* Reset the chip */
-
-	return 1;
-}
-#endif
-
 
 /*
  * Get timebase clock frequency
@@ -545,16 +559,14 @@ unsigned long get_tbclk (void)
 
 
 #if defined(CONFIG_WATCHDOG)
-void
-watchdog_reset(void)
+void watchdog_reset(void)
 {
 	int re_enable = disable_interrupts();
 	reset_4xx_watchdog();
 	if (re_enable) enable_interrupts();
 }
 
-void
-reset_4xx_watchdog(void)
+void reset_4xx_watchdog(void)
 {
 	/*
 	 * Clear TSR(WIS) bit
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 351da36e8..2e0dd6f06 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2006
+ * (C) Copyright 2000-2007
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -112,7 +112,7 @@ cpu_init_f (void)
 	unsigned long val;
 #endif
 
-#if defined(CONFIG_405EP)
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
@@ -128,17 +128,30 @@ cpu_init_f (void)
 	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
 	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select			*/
 	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+#if defined(CFG_GPIO0_ISR2H)
+	out32(GPIO0_ISR2H, CFG_GPIO0_ISR2H);
+	out32(GPIO0_ISR2L, CFG_GPIO0_ISR2L);
+#endif
+#if defined (CFG_GPIO0_TCR)
 	out32(GPIO0_TCR, CFG_GPIO0_TCR);	/* enable output driver for outputs	*/
+#endif
 
+#if defined (CONFIG_405EP)
 	/*
 	 * Set EMAC noise filter bits
 	 */
 	mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
+
+	/*
+	 * Enable the internal PCI arbiter
+	 */
+	mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+#endif /* CONFIG_405EP */
 #endif /* CONFIG_405EP */
 
-#if defined(CFG_440_GPIO_TABLE)
+#if defined(CFG_4xx_GPIO_TABLE)
 	gpio_set_chip_configuration();
-#endif /* CFG_440_GPIO_TABLE */
+#endif /* CFG_4xx_GPIO_TABLE */
 
 	/*
 	 * External Bus Controller (EBC) Setup
@@ -146,7 +159,7 @@ cpu_init_f (void)
 #if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
 #if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
      defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
-     defined(CONFIG_405))
+     defined(CONFIG_405EX) || defined(CONFIG_405))
 	/*
 	 * Move the next instructions into icache, since these modify the flash
 	 * we are running from!
diff --git a/cpu/ppc4xx/denali_data_eye.c b/cpu/ppc4xx/denali_data_eye.c
new file mode 100644
index 000000000..6c949a0fe
--- /dev/null
+++ b/cpu/ppc4xx/denali_data_eye.c
@@ -0,0 +1,396 @@
+/*
+ * cpu/ppc4xx/denali_data_eye.c
+ * Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj@acm.org>.
+ *
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+/*-----------------------------------------------------------------------------+
+ * denali_wait_for_dlllock.
+ +----------------------------------------------------------------------------*/
+int denali_wait_for_dlllock(void)
+{
+	u32 val;
+	int wait;
+
+	/* -----------------------------------------------------------+
+	 * Wait for the DCC master delay line to finish calibration
+	 * ----------------------------------------------------------*/
+	for (wait = 0; wait != 0xffff; ++wait) {
+		mfsdram(DDR0_17, val);
+		if (DDR0_17_DLLLOCKREG_DECODE(val)) {
+			/* dlllockreg bit on */
+			return 0;
+		}
+	}
+	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+	debug("Waiting for dlllockreg bit to raise\n");
+	return -1;
+}
+
+#if defined(CONFIG_DDR_DATA_EYE)
+#define DDR_DCR_BASE 0x10
+#define ddrcfga  (DDR_DCR_BASE+0x0)	/* DDR configuration address reg */
+#define ddrcfgd  (DDR_DCR_BASE+0x1)	/* DDR configuration data reg    */
+
+/*-----------------------------------------------------------------------------+
+ * wait_for_dram_init_complete.
+ +----------------------------------------------------------------------------*/
+static int wait_for_dram_init_complete(void)
+{
+	unsigned long val;
+	int wait = 0;
+
+	/* --------------------------------------------------------------+
+	 * Wait for 'DRAM initialization complete' bit in status register
+	 * -------------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_00);
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+			/* 'DRAM initialization complete' bit */
+			return 0;
+		else
+			wait++;
+	}
+	debug("DRAM initialization complete bit in status register did not "
+	      "rise\n");
+	return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+/*-----------------------------------------------------------------------------+
+ * denali_core_search_data_eye.
+ +----------------------------------------------------------------------------*/
+/*
+ * Avoid conflict with implementations of denali_core_search_data_eye in board-
+ * specific code.
+ */
+void denali_core_search_data_eye(void)
+    __attribute__ ((weak, alias("__denali_core_search_data_eye")));
+
+void __denali_core_search_data_eye(void)
+{
+	int k, j;
+	u32 val;
+	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+	volatile u32 *ram_pointer;
+	u32 test[NUM_TRIES] = {
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
+	};
+
+	ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
+
+	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+		/* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
+
+		/* -----------------------------------------------------------+
+		 * De-assert 'start' parameter.
+		 * ----------------------------------------------------------*/
+		mtdcr(ddrcfga, DDR0_02);
+		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+		    DDR0_02_START_OFF;
+		mtdcr(ddrcfgd, val);
+
+		/* -----------------------------------------------------------+
+		 * Set 'wr_dqs_shift'
+		 * ----------------------------------------------------------*/
+		mtdcr(ddrcfga, DDR0_09);
+		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) |
+		    DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+		mtdcr(ddrcfgd, val);
+
+		/* -----------------------------------------------------------+
+		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+		 * ----------------------------------------------------------*/
+		dqs_out_shift = wr_dqs_shift + 32;
+		mtdcr(ddrcfga, DDR0_22);
+		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) |
+		    DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+		mtdcr(ddrcfgd, val);
+
+		passing_cases = 0;
+
+		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64;
+		     dll_dqs_delay_X++) {
+			/* for (dll_dqs_delay_X=1; dll_dqs_delay_X<128;
+			   dll_dqs_delay_X++) { */
+			/* -----------------------------------------------------------+
+			 * Set 'dll_dqs_delay_X'.
+			 * ----------------------------------------------------------*/
+			/* dll_dqs_delay_0 */
+			mtdcr(ddrcfga, DDR0_17);
+			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+			    | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+			mtdcr(ddrcfga, DDR0_18);
+			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+			    | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+			    | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+			    | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+			    | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+			mtdcr(ddrcfga, DDR0_19);
+			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+			    | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+			    | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+			    | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+			    | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* clear any ECC errors */
+			mtdcr(ddrcfga, DDR0_00);
+			mtdcr(ddrcfgd,
+			      mfdcr(ddrcfgd) | DDR0_00_INT_ACK_ENCODE(0x3C));
+
+			sync();
+			eieio();
+
+			/* -----------------------------------------------------------+
+			 * Assert 'start' parameter.
+			 * ----------------------------------------------------------*/
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+			    DDR0_02_START_ON;
+			mtdcr(ddrcfgd, val);
+
+			sync();
+			eieio();
+
+			/* -----------------------------------------------------------+
+			 * Wait for the DCC master delay line to finish calibration
+			 * ----------------------------------------------------------*/
+			if (denali_wait_for_dlllock() != 0) {
+				printf("dll lock did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
+				       "%d\n", wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			sync();
+			eieio();
+
+			if (wait_for_dram_init_complete() != 0) {
+				printf("dram init complete did not occur!!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
+				       "%d\n", wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			udelay(100); /* wait 100us to ensure init is really completed !!! */
+
+			/* write values */
+			for (j = 0; j < NUM_TRIES; j++) {
+				ram_pointer[j] = test[j];
+
+				/* clear any cache at ram location */
+			      __asm__("dcbf 0,%0": :"r"(&ram_pointer[j]));
+			}
+
+			/* read values back */
+			for (j = 0; j < NUM_TRIES; j++) {
+				for (k = 0; k < NUM_READS; k++) {
+					/* clear any cache at ram location */
+				      __asm__("dcbf 0,%0": :"r"(&ram_pointer
+					    [j]));
+
+					if (ram_pointer[j] != test[j])
+						break;
+				}
+
+				/* read error */
+				if (k != NUM_READS)
+					break;
+			}
+
+			/* See if the dll_dqs_delay_X value passed. */
+			mtdcr(ddrcfga, DDR0_00);
+			if (j < NUM_TRIES
+			    || (DDR0_00_INT_STATUS_DECODE(mfdcr(ddrcfgd)) &
+				0x3F)) {
+				/* Failed */
+				passing_cases = 0;
+				/* break; */
+			} else {
+				/* Passed */
+				if (passing_cases == 0)
+					dll_dqs_delay_X_sw_val =
+					    dll_dqs_delay_X;
+				passing_cases++;
+				if (passing_cases >= max_passing_cases) {
+					max_passing_cases = passing_cases;
+					wr_dqs_shift_with_max_passing_cases =
+					    wr_dqs_shift;
+					dll_dqs_delay_X_start_window =
+					    dll_dqs_delay_X_sw_val;
+					dll_dqs_delay_X_end_window =
+					    dll_dqs_delay_X;
+				}
+			}
+
+			/* -----------------------------------------------------------+
+			 * De-assert 'start' parameter.
+			 * ----------------------------------------------------------*/
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+			    DDR0_02_START_OFF;
+			mtdcr(ddrcfgd, val);
+		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+	/* -----------------------------------------------------------+
+	 * Largest passing window is now detected.
+	 * ----------------------------------------------------------*/
+
+	/* Compute dll_dqs_delay_X value */
+	dll_dqs_delay_X = (dll_dqs_delay_X_end_window +
+			   dll_dqs_delay_X_start_window) / 2;
+	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+	debug("DQS calibration - Window detected:\n");
+	debug("max_passing_cases = %d\n", max_passing_cases);
+	debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
+	debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
+	debug("dll_dqs_delay_X window = %d - %d\n",
+	      dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+	/* -----------------------------------------------------------+
+	 * De-assert 'start' parameter.
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+	mtdcr(ddrcfgd, val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'wr_dqs_shift'
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_09);
+	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+	    | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_09=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+	 * ----------------------------------------------------------*/
+	dqs_out_shift = wr_dqs_shift + 32;
+	mtdcr(ddrcfga, DDR0_22);
+	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+	    | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_22=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'dll_dqs_delay_X'.
+	 * ----------------------------------------------------------*/
+	/* dll_dqs_delay_0 */
+	mtdcr(ddrcfga, DDR0_17);
+	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+	    | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_17=0x%08lx\n", val);
+
+	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+	mtdcr(ddrcfga, DDR0_18);
+	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+	    | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+	    | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+	    | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+	    | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_18=0x%08lx\n", val);
+
+	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+	mtdcr(ddrcfga, DDR0_19);
+	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+	    | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+	    | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+	    | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+	    | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_19=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Assert 'start' parameter.
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+	mtdcr(ddrcfgd, val);
+
+	sync();
+	eieio();
+
+	/* -----------------------------------------------------------+
+	 * Wait for the DCC master delay line to finish calibration
+	 * ----------------------------------------------------------*/
+	if (denali_wait_for_dlllock() != 0) {
+		printf("dll lock did not occur !!!\n");
+		hang();
+	}
+	sync();
+	eieio();
+
+	if (wait_for_dram_init_complete() != 0) {
+		printf("dram init complete did not occur !!!\n");
+		hang();
+	}
+	udelay(100); /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* defined(CONFIG_DDR_DATA_EYE) */
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
new file mode 100644
index 000000000..825bc2139
--- /dev/null
+++ b/cpu/ppc4xx/denali_spd_ddr2.c
@@ -0,0 +1,1254 @@
+/*
+ * cpu/ppc4xx/denali_spd_ddr2.c
+ * This SPD SDRAM detection code supports AMCC PPC44x CPUs with a Denali-core
+ * DDR2 controller, specifically the 440EPx/GRx.
+ *
+ * (C) Copyright 2007
+ * Larry Johnson, lrj@acm.org.
+ *
+ * Based primarily on cpu/ppc4xx/4xx_spd_ddr2.c, which is...
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT   AMCC   CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_SPD_EEPROM) &&				\
+	(defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
+
+/*-----------------------------------------------------------------------------+
+ * Defines
+ *-----------------------------------------------------------------------------*/
+#ifndef	TRUE
+#define TRUE		1
+#endif
+#ifndef FALSE
+#define FALSE		0
+#endif
+
+#define MAXDIMMS	2
+#define MAXRANKS	2
+
+#define ONE_BILLION	1000000000
+
+#define MULDIV64(m1, m2, d)	(u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
+
+#define DLL_DQS_DELAY	0x19
+#define DLL_DQS_BYPASS	0x0B
+#define DQS_OUT_SHIFT	0x7F
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#if defined(CFG_ENABLE_SDRAM_CACHE)
+#define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
+#endif
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
+extern void dcbz_area(u32 start_address, u32 num_bytes);
+extern void dflush(void);
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang(void)
+{
+	hang();
+}
+void spd_ddr_init_hang(void)
+    __attribute__ ((weak, alias("__spd_ddr_init_hang")));
+
+#if defined(DEBUG)
+static void print_mcsr(void)
+{
+	printf("MCSR = 0x%08X\n", mfspr(SPRN_MCSR));
+}
+
+static void denali_sdram_register_dump(void)
+{
+	unsigned int sdram_data;
+
+	printf("\n  Register Dump:\n");
+	mfsdram(DDR0_00, sdram_data);
+	printf("        DDR0_00 = 0x%08X", sdram_data);
+	mfsdram(DDR0_01, sdram_data);
+	printf("        DDR0_01 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_02, sdram_data);
+	printf("        DDR0_02 = 0x%08X", sdram_data);
+	mfsdram(DDR0_03, sdram_data);
+	printf("        DDR0_03 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_04, sdram_data);
+	printf("        DDR0_04 = 0x%08X", sdram_data);
+	mfsdram(DDR0_05, sdram_data);
+	printf("        DDR0_05 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_06, sdram_data);
+	printf("        DDR0_06 = 0x%08X", sdram_data);
+	mfsdram(DDR0_07, sdram_data);
+	printf("        DDR0_07 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_08, sdram_data);
+	printf("        DDR0_08 = 0x%08X", sdram_data);
+	mfsdram(DDR0_09, sdram_data);
+	printf("        DDR0_09 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_10, sdram_data);
+	printf("        DDR0_10 = 0x%08X", sdram_data);
+	mfsdram(DDR0_11, sdram_data);
+	printf("        DDR0_11 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_12, sdram_data);
+	printf("        DDR0_12 = 0x%08X", sdram_data);
+	mfsdram(DDR0_14, sdram_data);
+	printf("        DDR0_14 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_17, sdram_data);
+	printf("        DDR0_17 = 0x%08X", sdram_data);
+	mfsdram(DDR0_18, sdram_data);
+	printf("        DDR0_18 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_19, sdram_data);
+	printf("        DDR0_19 = 0x%08X", sdram_data);
+	mfsdram(DDR0_20, sdram_data);
+	printf("        DDR0_20 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_21, sdram_data);
+	printf("        DDR0_21 = 0x%08X", sdram_data);
+	mfsdram(DDR0_22, sdram_data);
+	printf("        DDR0_22 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_23, sdram_data);
+	printf("        DDR0_23 = 0x%08X", sdram_data);
+	mfsdram(DDR0_24, sdram_data);
+	printf("        DDR0_24 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_25, sdram_data);
+	printf("        DDR0_25 = 0x%08X", sdram_data);
+	mfsdram(DDR0_26, sdram_data);
+	printf("        DDR0_26 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_27, sdram_data);
+	printf("        DDR0_27 = 0x%08X", sdram_data);
+	mfsdram(DDR0_28, sdram_data);
+	printf("        DDR0_28 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_31, sdram_data);
+	printf("        DDR0_31 = 0x%08X", sdram_data);
+	mfsdram(DDR0_32, sdram_data);
+	printf("        DDR0_32 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_33, sdram_data);
+	printf("        DDR0_33 = 0x%08X", sdram_data);
+	mfsdram(DDR0_34, sdram_data);
+	printf("        DDR0_34 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_35, sdram_data);
+	printf("        DDR0_35 = 0x%08X", sdram_data);
+	mfsdram(DDR0_36, sdram_data);
+	printf("        DDR0_36 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_37, sdram_data);
+	printf("        DDR0_37 = 0x%08X", sdram_data);
+	mfsdram(DDR0_38, sdram_data);
+	printf("        DDR0_38 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_39, sdram_data);
+	printf("        DDR0_39 = 0x%08X", sdram_data);
+	mfsdram(DDR0_40, sdram_data);
+	printf("        DDR0_40 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_41, sdram_data);
+	printf("        DDR0_41 = 0x%08X", sdram_data);
+	mfsdram(DDR0_42, sdram_data);
+	printf("        DDR0_42 = 0x%08X\n", sdram_data);
+	mfsdram(DDR0_43, sdram_data);
+	printf("        DDR0_43 = 0x%08X", sdram_data);
+	mfsdram(DDR0_44, sdram_data);
+	printf("        DDR0_44 = 0x%08X\n", sdram_data);
+}
+#else
+static inline void denali_sdram_register_dump(void)
+{
+}
+
+inline static void print_mcsr(void)
+{
+}
+#endif /* defined(DEBUG) */
+
+static int is_ecc_enabled(void)
+{
+	u32 val;
+
+	mfsdram(DDR0_22, val);
+	return 0x3 == DDR0_22_CTRL_RAW_DECODE(val);
+}
+
+static unsigned char spd_read(u8 chip, unsigned int addr)
+{
+	u8 data[2];
+
+	if (0 != i2c_probe(chip) || 0 != i2c_read(chip, addr, 1, data, 1)) {
+		debug("spd_read(0x%02X, 0x%02X) failed\n", chip, addr);
+		return 0;
+	}
+	debug("spd_read(0x%02X, 0x%02X) returned 0x%02X\n",
+	      chip, addr, data[0]);
+	return data[0];
+}
+
+static unsigned long get_tcyc(unsigned char reg)
+{
+	/*
+	 * Byte 9, et al: Cycle time for CAS Latency=X, is split into two
+	 * nibbles: the higher order nibble (bits 4-7) designates the cycle time
+	 * to a granularity of 1ns; the value presented by the lower order
+	 * nibble (bits 0-3) has a granularity of .1ns and is added to the value
+	 * designated by the higher nibble. In addition, four lines of the lower
+	 * order nibble are assigned to support +.25, +.33, +.66, and +.75.
+	 */
+
+	unsigned char subfield_b = reg & 0x0F;
+
+	switch (subfield_b & 0x0F) {
+	case 0x0:
+	case 0x1:
+	case 0x2:
+	case 0x3:
+	case 0x4:
+	case 0x5:
+	case 0x6:
+	case 0x7:
+	case 0x8:
+	case 0x9:
+		return 1000 * (reg >> 4) + 100 * subfield_b;
+	case 0xA:
+		return 1000 * (reg >> 4) + 250;
+	case 0xB:
+		return 1000 * (reg >> 4) + 333;
+	case 0xC:
+		return 1000 * (reg >> 4) + 667;
+	case 0xD:
+		return 1000 * (reg >> 4) + 750;
+	}
+	return 0;
+}
+
+/*------------------------------------------------------------------
+ * Find the installed DIMMs, make sure that the are DDR2, and fill
+ * in the dimm_ranks array.  Then dimm_ranks[dimm_num] > 0 iff the
+ * DIMM and dimm_num is present.
+ * Note: Because there are only two chip-select lines, it is assumed
+ * that a board with a single socket can support two ranks on that
+ * socket, while a board with two sockets can support only one rank
+ * on each socket.
+ *-----------------------------------------------------------------*/
+static void get_spd_info(unsigned long dimm_ranks[],
+			 unsigned long *ranks,
+			 unsigned char const iic0_dimm_addr[],
+			 unsigned long num_dimm_banks)
+{
+	unsigned long dimm_num;
+	unsigned long dimm_found = FALSE;
+	unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
+	unsigned char num_of_bytes;
+	unsigned char total_size;
+
+	*ranks = 0;
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		num_of_bytes = 0;
+		total_size = 0;
+
+		num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+		total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+		if ((num_of_bytes != 0) && (total_size != 0)) {
+			unsigned char const dimm_type =
+			    spd_read(iic0_dimm_addr[dimm_num], 2);
+
+			unsigned long ranks_on_dimm =
+			    (spd_read(iic0_dimm_addr[dimm_num], 5) & 0x07) + 1;
+
+			if (8 != dimm_type) {
+				switch (dimm_type) {
+				case 1:
+					printf("ERROR: Standard Fast Page Mode "
+					       "DRAM DIMM");
+					break;
+				case 2:
+					printf("ERROR: EDO DIMM");
+					break;
+				case 3:
+					printf("ERROR: Pipelined Nibble DIMM");
+					break;
+				case 4:
+					printf("ERROR: SDRAM DIMM");
+					break;
+				case 5:
+					printf("ERROR: Multiplexed ROM DIMM");
+					break;
+				case 6:
+					printf("ERROR: SGRAM DIMM");
+					break;
+				case 7:
+					printf("ERROR: DDR1 DIMM");
+					break;
+				default:
+					printf("ERROR: Unknown DIMM (type %d)",
+					       (unsigned int)dimm_type);
+					break;
+				}
+				printf(" detected in slot %lu.\n", dimm_num);
+				printf("Only DDR2 SDRAM DIMMs are supported."
+				       "\n");
+				printf("Replace the module with a DDR2 DIMM."
+				       "\n\n");
+				spd_ddr_init_hang();
+			}
+			dimm_found = TRUE;
+			debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
+			      "\n", dimm_num, ranks_on_dimm);
+			if (ranks_on_dimm > max_ranks_per_dimm) {
+				printf("WARNING: DRAM DIMM in slot %lu has %lu "
+				       "ranks.\n");
+				if (1 == max_ranks_per_dimm) {
+					printf("Only one rank will be used.\n");
+				} else {
+					printf
+					    ("Only two ranks will be used.\n");
+				}
+				ranks_on_dimm = max_ranks_per_dimm;
+			}
+			dimm_ranks[dimm_num] = ranks_on_dimm;
+			*ranks += ranks_on_dimm;
+		} else {
+			dimm_ranks[dimm_num] = 0;
+			debug("DIMM slot %lu: Not populated\n", dimm_num);
+		}
+	}
+	if (dimm_found == FALSE) {
+		printf("ERROR: No memory installed.\n");
+		printf("Install at least one DDR2 DIMM.\n\n");
+		spd_ddr_init_hang();
+	}
+	debug("Total number of ranks = %d\n", *ranks);
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that
+ * frequency previously calculated is supported.
+ *-----------------------------------------------------------------*/
+static void check_frequency(unsigned long *dimm_ranks,
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks,
+			    unsigned long sdram_freq)
+{
+	unsigned long dimm_num;
+	unsigned long cycle_time;
+	unsigned long calc_cycle_time;
+
+	/*
+	 * calc_cycle_time is calculated from DDR frequency set by board/chip
+	 * and is expressed in picoseconds to match the way DIMM cycle time is
+	 * calculated below.
+	 */
+	calc_cycle_time = MULDIV64(ONE_BILLION, 1000, sdram_freq);
+
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_ranks[dimm_num]) {
+			cycle_time =
+			    get_tcyc(spd_read(iic0_dimm_addr[dimm_num], 9));
+			debug("cycle_time=%d ps\n", cycle_time);
+
+			if (cycle_time > (calc_cycle_time + 10)) {
+				/*
+				 * the provided sdram cycle_time is too small
+				 * for the available DIMM cycle_time. The
+				 * additionnal 10ps is here to accept a small
+				 * incertainty.
+				 */
+				printf
+				    ("ERROR: DRAM DIMM detected with cycle_time %d ps in "
+				     "slot %d \n while calculated cycle time is %d ps.\n",
+				     (unsigned int)cycle_time,
+				     (unsigned int)dimm_num,
+				     (unsigned int)calc_cycle_time);
+				printf
+				    ("Replace the DIMM, or change DDR frequency via "
+				     "strapping bits.\n\n");
+				spd_ddr_init_hang();
+			}
+		}
+	}
+}
+
+/*------------------------------------------------------------------
+ * This routine gets size information for the installed memory
+ * DIMMs.
+ *-----------------------------------------------------------------*/
+static void get_dimm_size(unsigned long dimm_ranks[],
+			  unsigned char const iic0_dimm_addr[],
+			  unsigned long num_dimm_banks,
+			  unsigned long *const rows,
+			  unsigned long *const banks,
+			  unsigned long *const cols, unsigned long *const width)
+{
+	unsigned long dimm_num;
+
+	*rows = 0;
+	*banks = 0;
+	*cols = 0;
+	*width = 0;
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_ranks[dimm_num]) {
+			unsigned long t;
+
+			/* Rows */
+			t = spd_read(iic0_dimm_addr[dimm_num], 3);
+			if (0 == *rows) {
+				*rows = t;
+			} else if (t != *rows) {
+				printf("ERROR: DRAM DIMM modules do not all "
+				       "have the same number of rows.\n\n");
+				spd_ddr_init_hang();
+			}
+			/* Banks */
+			t = spd_read(iic0_dimm_addr[dimm_num], 17);
+			if (0 == *banks) {
+				*banks = t;
+			} else if (t != *banks) {
+				printf("ERROR: DRAM DIMM modules do not all "
+				       "have the same number of banks.\n\n");
+				spd_ddr_init_hang();
+			}
+			/* Columns */
+			t = spd_read(iic0_dimm_addr[dimm_num], 4);
+			if (0 == *cols) {
+				*cols = t;
+			} else if (t != *cols) {
+				printf("ERROR: DRAM DIMM modules do not all "
+				       "have the same number of columns.\n\n");
+				spd_ddr_init_hang();
+			}
+			/* Data width */
+			t = spd_read(iic0_dimm_addr[dimm_num], 6);
+			if (0 == *width) {
+				*width = t;
+			} else if (t != *width) {
+				printf("ERROR: DRAM DIMM modules do not all "
+				       "have the same data width.\n\n");
+				spd_ddr_init_hang();
+			}
+		}
+	}
+	debug("Number of rows = %d\n", *rows);
+	debug("Number of columns = %d\n", *cols);
+	debug("Number of banks = %d\n", *banks);
+	debug("Data width = %d\n", *width);
+	if (*rows > 14) {
+		printf("ERROR: DRAM DIMM modules have %lu address rows.\n",
+		       *rows);
+		printf("Only modules with 14 or fewer rows are supported.\n\n");
+		spd_ddr_init_hang();
+	}
+	if (4 != *banks && 8 != *banks) {
+		printf("ERROR: DRAM DIMM modules have %lu banks.\n", *banks);
+		printf("Only modules with 4 or 8 banks are supported.\n\n");
+		spd_ddr_init_hang();
+	}
+	if (*cols > 12) {
+		printf("ERROR: DRAM DIMM modules have %lu address columns.\n",
+		       *cols);
+		printf("Only modules with 12 or fewer columns are "
+		       "supported.\n\n");
+		spd_ddr_init_hang();
+	}
+	if (32 != *width && 40 != *width && 64 != *width && 72 != *width) {
+		printf("ERROR: DRAM DIMM modules have a width of %lu bit.\n",
+		       *width);
+		printf("Only modules with widths of 32, 40, 64, and 72 bits "
+		       "are supported.\n\n");
+		spd_ddr_init_hang();
+	}
+}
+
+/*------------------------------------------------------------------
+ * Only 1.8V modules are supported.  This routine verifies this.
+ *-----------------------------------------------------------------*/
+static void check_voltage_type(unsigned long dimm_ranks[],
+			       unsigned char const iic0_dimm_addr[],
+			       unsigned long num_dimm_banks)
+{
+	unsigned long dimm_num;
+	unsigned long voltage_type;
+
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_ranks[dimm_num]) {
+			voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+			if (0x05 != voltage_type) {	/* 1.8V for DDR2 */
+				printf("ERROR: Slot %lu provides 1.8V for DDR2 "
+				       "DIMMs.\n", dimm_num);
+				switch (voltage_type) {
+				case 0x00:
+					printf("This DIMM is 5.0 Volt/TTL.\n");
+					break;
+				case 0x01:
+					printf("This DIMM is LVTTL.\n");
+					break;
+				case 0x02:
+					printf("This DIMM is 1.5 Volt.\n");
+					break;
+				case 0x03:
+					printf("This DIMM is 3.3 Volt/TTL.\n");
+					break;
+				case 0x04:
+					printf("This DIMM is 2.5 Volt.\n");
+					break;
+				default:
+					printf("This DIMM is an unknown "
+					       "voltage.\n");
+					break;
+				}
+				printf("Replace it with a 1.8V DDR2 DIMM.\n\n");
+				spd_ddr_init_hang();
+			}
+		}
+	}
+}
+
+static void program_ddr0_03(unsigned long dimm_ranks[],
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks,
+			    unsigned long sdram_freq,
+			    unsigned long rows, unsigned long *cas_latency)
+{
+	unsigned long dimm_num;
+	unsigned long cas_index;
+	unsigned long cycle_2_0_clk;
+	unsigned long cycle_3_0_clk;
+	unsigned long cycle_4_0_clk;
+	unsigned long cycle_5_0_clk;
+	unsigned long max_2_0_tcyc_ps = 100;
+	unsigned long max_3_0_tcyc_ps = 100;
+	unsigned long max_4_0_tcyc_ps = 100;
+	unsigned long max_5_0_tcyc_ps = 100;
+	unsigned char cas_available = 0x3C;	/* value for DDR2 */
+	u32 ddr0_03 = DDR0_03_BSTLEN_ENCODE(0x2) | DDR0_03_INITAREF_ENCODE(0x2);
+	unsigned int const tcyc_addr[3] = { 9, 23, 25 };
+
+	/*------------------------------------------------------------------
+	 * Get the board configuration info.
+	 *-----------------------------------------------------------------*/
+	debug("sdram_freq = %d\n", sdram_freq);
+
+	/*------------------------------------------------------------------
+	 * Handle the timing.  We need to find the worst case timing of all
+	 * the dimm modules installed.
+	 *-----------------------------------------------------------------*/
+	/* loop through all the DIMM slots on the board */
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		/* If a dimm is installed in a particular slot ... */
+		if (dimm_ranks[dimm_num]) {
+			unsigned char const cas_bit =
+			    spd_read(iic0_dimm_addr[dimm_num], 18);
+			unsigned char cas_mask;
+
+			cas_available &= cas_bit;
+			for (cas_mask = 0x80; cas_mask; cas_mask >>= 1) {
+				if (cas_bit & cas_mask)
+					break;
+			}
+			debug("cas_bit (SPD byte 18) = %02X, cas_mask = %02X\n",
+			      cas_bit, cas_mask);
+
+			for (cas_index = 0; cas_index < 3;
+			     cas_mask >>= 1, cas_index++) {
+				unsigned long cycle_time_ps;
+
+				if (!(cas_available & cas_mask)) {
+					continue;
+				}
+				cycle_time_ps =
+				    get_tcyc(spd_read(iic0_dimm_addr[dimm_num],
+						      tcyc_addr[cas_index]));
+
+				debug("cas_index = %d: cycle_time_ps = %d\n",
+				      cas_index, cycle_time_ps);
+				/*
+				 * DDR2 devices use the following bitmask for CAS latency:
+				 *  Bit   7    6    5    4    3    2    1    0
+				 *       TBD  6.0  5.0  4.0  3.0  2.0  TBD  TBD
+				 */
+				switch (cas_mask) {
+				case 0x20:
+					max_5_0_tcyc_ps =
+					    max(max_5_0_tcyc_ps, cycle_time_ps);
+					break;
+				case 0x10:
+					max_4_0_tcyc_ps =
+					    max(max_4_0_tcyc_ps, cycle_time_ps);
+					break;
+				case 0x08:
+					max_3_0_tcyc_ps =
+					    max(max_3_0_tcyc_ps, cycle_time_ps);
+					break;
+				case 0x04:
+					max_2_0_tcyc_ps =
+					    max(max_2_0_tcyc_ps, cycle_time_ps);
+					break;
+				}
+			}
+		}
+	}
+	debug("cas_available (bit map) = 0x%02X\n", cas_available);
+
+	/*------------------------------------------------------------------
+	 * Set the SDRAM mode, SDRAM_MMODE
+	 *-----------------------------------------------------------------*/
+
+	/* add 10 here because of rounding problems */
+	cycle_2_0_clk = MULDIV64(ONE_BILLION, 1000, max_2_0_tcyc_ps) + 10;
+	cycle_3_0_clk = MULDIV64(ONE_BILLION, 1000, max_3_0_tcyc_ps) + 10;
+	cycle_4_0_clk = MULDIV64(ONE_BILLION, 1000, max_4_0_tcyc_ps) + 10;
+	cycle_5_0_clk = MULDIV64(ONE_BILLION, 1000, max_5_0_tcyc_ps) + 10;
+	debug("cycle_2_0_clk = %d\n", cycle_2_0_clk);
+	debug("cycle_3_0_clk = %d\n", cycle_3_0_clk);
+	debug("cycle_4_0_clk = %d\n", cycle_4_0_clk);
+	debug("cycle_5_0_clk = %d\n", cycle_5_0_clk);
+
+	if ((cas_available & 0x04) && (sdram_freq <= cycle_2_0_clk)) {
+		*cas_latency = 2;
+		ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x2) |
+		    DDR0_03_CASLAT_LIN_ENCODE(0x4);
+	} else if ((cas_available & 0x08) && (sdram_freq <= cycle_3_0_clk)) {
+		*cas_latency = 3;
+		ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x3) |
+		    DDR0_03_CASLAT_LIN_ENCODE(0x6);
+	} else if ((cas_available & 0x10) && (sdram_freq <= cycle_4_0_clk)) {
+		*cas_latency = 4;
+		ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x4) |
+		    DDR0_03_CASLAT_LIN_ENCODE(0x8);
+	} else if ((cas_available & 0x20) && (sdram_freq <= cycle_5_0_clk)) {
+		*cas_latency = 5;
+		ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x5) |
+		    DDR0_03_CASLAT_LIN_ENCODE(0xA);
+	} else {
+		printf("ERROR: Cannot find a supported CAS latency with the "
+		       "installed DIMMs.\n");
+		printf("Only DDR2 DIMMs with CAS latencies of 2.0, 3.0, 4.0, "
+		       "and 5.0 are supported.\n");
+		printf("Make sure the PLB speed is within the supported range "
+		       "of the DIMMs.\n");
+		printf("sdram_freq=%d cycle2=%d cycle3=%d cycle4=%d "
+		       "cycle5=%d\n\n", sdram_freq, cycle_2_0_clk,
+		       cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
+		spd_ddr_init_hang();
+	}
+	debug("CAS latency = %d\n", *cas_latency);
+	mtsdram(DDR0_03, ddr0_03);
+}
+
+static void program_ddr0_04(unsigned long dimm_ranks[],
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks,
+			    unsigned long sdram_freq)
+{
+	unsigned long dimm_num;
+	unsigned long t_rc_ps = 0;
+	unsigned long t_rrd_ps = 0;
+	unsigned long t_rtp_ps = 0;
+	unsigned long t_rc_clk;
+	unsigned long t_rrd_clk;
+	unsigned long t_rtp_clk;
+
+	/*------------------------------------------------------------------
+	 * Handle the timing.  We need to find the worst case timing of all
+	 * the dimm modules installed.
+	 *-----------------------------------------------------------------*/
+	/* loop through all the DIMM slots on the board */
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		/* If a dimm is installed in a particular slot ... */
+		if (dimm_ranks[dimm_num]) {
+			unsigned long ps;
+
+			/* tRC */
+			ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 41);
+			switch (spd_read(iic0_dimm_addr[dimm_num], 40) >> 4) {
+			case 0x1:
+				ps += 250;
+				break;
+			case 0x2:
+				ps += 333;
+				break;
+			case 0x3:
+				ps += 500;
+				break;
+			case 0x4:
+				ps += 667;
+				break;
+			case 0x5:
+				ps += 750;
+				break;
+			}
+			t_rc_ps = max(t_rc_ps, ps);
+			/* tRRD */
+			ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 28);
+			t_rrd_ps = max(t_rrd_ps, ps);
+			/* tRTP */
+			ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 38);
+			t_rtp_ps = max(t_rtp_ps, ps);
+		}
+	}
+	debug("t_rc_ps  = %d\n", t_rc_ps);
+	t_rc_clk = (MULDIV64(sdram_freq, t_rc_ps, ONE_BILLION) + 999) / 1000;
+	debug("t_rrd_ps = %d\n", t_rrd_ps);
+	t_rrd_clk = (MULDIV64(sdram_freq, t_rrd_ps, ONE_BILLION) + 999) / 1000;
+	debug("t_rtp_ps = %d\n", t_rtp_ps);
+	t_rtp_clk = (MULDIV64(sdram_freq, t_rtp_ps, ONE_BILLION) + 999) / 1000;
+	mtsdram(DDR0_04, DDR0_04_TRC_ENCODE(t_rc_clk) |
+		DDR0_04_TRRD_ENCODE(t_rrd_clk) |
+		DDR0_04_TRTP_ENCODE(t_rtp_clk));
+}
+
+static void program_ddr0_05(unsigned long dimm_ranks[],
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks,
+			    unsigned long sdram_freq)
+{
+	unsigned long dimm_num;
+	unsigned long t_rp_ps = 0;
+	unsigned long t_ras_ps = 0;
+	unsigned long t_rp_clk;
+	unsigned long t_ras_clk;
+	u32 ddr0_05 = DDR0_05_TMRD_ENCODE(0x2) | DDR0_05_TEMRS_ENCODE(0x2);
+
+	/*------------------------------------------------------------------
+	 * Handle the timing.  We need to find the worst case timing of all
+	 * the dimm modules installed.
+	 *-----------------------------------------------------------------*/
+	/* loop through all the DIMM slots on the board */
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		/* If a dimm is installed in a particular slot ... */
+		if (dimm_ranks[dimm_num]) {
+			unsigned long ps;
+
+			/* tRP */
+			ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 27);
+			t_rp_ps = max(t_rp_ps, ps);
+			/* tRAS */
+			ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 30);
+			t_ras_ps = max(t_ras_ps, ps);
+		}
+	}
+	debug("t_rp_ps  = %d\n", t_rp_ps);
+	t_rp_clk = (MULDIV64(sdram_freq, t_rp_ps, ONE_BILLION) + 999) / 1000;
+	debug("t_ras_ps = %d\n", t_ras_ps);
+	t_ras_clk = (MULDIV64(sdram_freq, t_ras_ps, ONE_BILLION) + 999) / 1000;
+	mtsdram(DDR0_05, ddr0_05 | DDR0_05_TRP_ENCODE(t_rp_clk) |
+		DDR0_05_TRAS_MIN_ENCODE(t_ras_clk));
+}
+
+static void program_ddr0_06(unsigned long dimm_ranks[],
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks,
+			    unsigned long sdram_freq)
+{
+	unsigned long dimm_num;
+	unsigned char spd_40;
+	unsigned long t_wtr_ps = 0;
+	unsigned long t_rfc_ps = 0;
+	unsigned long t_wtr_clk;
+	unsigned long t_rfc_clk;
+	u32 ddr0_06 =
+	    DDR0_06_WRITEINTERP_ENCODE(0x1) | DDR0_06_TDLL_ENCODE(200);
+
+	/*------------------------------------------------------------------
+	 * Handle the timing.  We need to find the worst case timing of all
+	 * the dimm modules installed.
+	 *-----------------------------------------------------------------*/
+	/* loop through all the DIMM slots on the board */
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		/* If a dimm is installed in a particular slot ... */
+		if (dimm_ranks[dimm_num]) {
+			unsigned long ps;
+
+			/* tWTR */
+			ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 37);
+			t_wtr_ps = max(t_wtr_ps, ps);
+			/* tRFC */
+			ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 42);
+			spd_40 = spd_read(iic0_dimm_addr[dimm_num], 40);
+			ps += 256000 * (spd_40 & 0x01);
+			switch ((spd_40 & 0x0E) >> 1) {
+			case 0x1:
+				ps += 250;
+				break;
+			case 0x2:
+				ps += 333;
+				break;
+			case 0x3:
+				ps += 500;
+				break;
+			case 0x4:
+				ps += 667;
+				break;
+			case 0x5:
+				ps += 750;
+				break;
+			}
+			t_rfc_ps = max(t_rfc_ps, ps);
+		}
+	}
+	debug("t_wtr_ps = %d\n", t_wtr_ps);
+	t_wtr_clk = (MULDIV64(sdram_freq, t_wtr_ps, ONE_BILLION) + 999) / 1000;
+	debug("t_rfc_ps = %d\n", t_rfc_ps);
+	t_rfc_clk = (MULDIV64(sdram_freq, t_rfc_ps, ONE_BILLION) + 999) / 1000;
+	mtsdram(DDR0_06, ddr0_06 | DDR0_06_TWTR_ENCODE(t_wtr_clk) |
+		DDR0_06_TRFC_ENCODE(t_rfc_clk));
+}
+
+static void program_ddr0_10(unsigned long dimm_ranks[], unsigned long ranks)
+{
+	unsigned long csmap;
+
+	if (2 == ranks) {
+		/* Both chip selects in use */
+		csmap = 0x03;
+	} else {
+		/* One chip select in use */
+		csmap = (1 == dimm_ranks[0]) ? 0x1 : 0x2;
+	}
+	mtsdram(DDR0_10, DDR0_10_WRITE_MODEREG_ENCODE(0x0) |
+		DDR0_10_CS_MAP_ENCODE(csmap) |
+		DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(0));
+}
+
+static void program_ddr0_11(unsigned long sdram_freq)
+{
+	unsigned long const t_xsnr_ps = 200000;	/* 200 ns */
+	unsigned long t_xsnr_clk;
+
+	debug("t_xsnr_ps = %d\n", t_xsnr_ps);
+	t_xsnr_clk =
+	    (MULDIV64(sdram_freq, t_xsnr_ps, ONE_BILLION) + 999) / 1000;
+	mtsdram(DDR0_11, DDR0_11_SREFRESH_ENCODE(0) |
+		DDR0_11_TXSNR_ENCODE(t_xsnr_clk) | DDR0_11_TXSR_ENCODE(200));
+}
+
+static void program_ddr0_22(unsigned long dimm_ranks[],
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks, unsigned long width)
+{
+#if defined(CONFIG_DDR_ECC)
+	unsigned long dimm_num;
+	unsigned long ecc_available = width >= 64;
+	u32 ddr0_22 = DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
+	    DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
+	    DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS);
+
+	/* loop through all the DIMM slots on the board */
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		/* If a dimm is installed in a particular slot ... */
+		if (dimm_ranks[dimm_num]) {
+			/* Check for ECC */
+			if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
+				  0x02)) {
+				ecc_available = FALSE;
+			}
+		}
+	}
+	if (ecc_available) {
+		debug("ECC found on all DIMMs present\n");
+		mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x3));
+	} else {
+		debug("ECC not found on some or all DIMMs present\n");
+		mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x0));
+	}
+#else
+	mtsdram(DDR0_22, DDR0_22_CTRL_RAW_ENCODE(0x0) |
+		DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
+		DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
+		DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS));
+#endif /* defined(CONFIG_DDR_ECC) */
+}
+
+static void program_ddr0_24(unsigned long ranks)
+{
+	u32 ddr0_24 = DDR0_24_RTT_PAD_TERMINATION_ENCODE(0x1) |	/* 75 ohm */
+	    DDR0_24_ODT_RD_MAP_CS1_ENCODE(0x0);
+
+	if (2 == ranks) {
+		/* Both chip selects in use */
+		ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x1) |
+		    DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x2);
+	} else {
+		/* One chip select in use */
+		/* One of the two fields added to ddr0_24 is a "don't care" */
+		ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x2) |
+		    DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x1);
+	}
+	mtsdram(DDR0_24, ddr0_24);
+}
+
+static void program_ddr0_26(unsigned long sdram_freq)
+{
+	unsigned long const t_ref_ps = 7800000;	/* 7.8 us. refresh */
+	/* TODO: check definition of tRAS_MAX */
+	unsigned long const t_ras_max_ps = 9 * t_ref_ps;
+	unsigned long t_ras_max_clk;
+	unsigned long t_ref_clk;
+
+	/* Round down t_ras_max_clk and t_ref_clk */
+	debug("t_ras_max_ps = %d\n", t_ras_max_ps);
+	t_ras_max_clk = MULDIV64(sdram_freq, t_ras_max_ps, ONE_BILLION) / 1000;
+	debug("t_ref_ps     = %d\n", t_ref_ps);
+	t_ref_clk = MULDIV64(sdram_freq, t_ref_ps, ONE_BILLION) / 1000;
+	mtsdram(DDR0_26, DDR0_26_TRAS_MAX_ENCODE(t_ras_max_clk) |
+		DDR0_26_TREF_ENCODE(t_ref_clk));
+}
+
+static void program_ddr0_27(unsigned long sdram_freq)
+{
+	unsigned long const t_init_ps = 200000000;	/* 200 us. init */
+	unsigned long t_init_clk;
+
+	debug("t_init_ps = %d\n", t_init_ps);
+	t_init_clk =
+	    (MULDIV64(sdram_freq, t_init_ps, ONE_BILLION) + 999) / 1000;
+	mtsdram(DDR0_27, DDR0_27_EMRS_DATA_ENCODE(0x0000) |
+		DDR0_27_TINIT_ENCODE(t_init_clk));
+}
+
+static void program_ddr0_43(unsigned long dimm_ranks[],
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks,
+			    unsigned long sdram_freq,
+			    unsigned long cols, unsigned long banks)
+{
+	unsigned long dimm_num;
+	unsigned long t_wr_ps = 0;
+	unsigned long t_wr_clk;
+	u32 ddr0_43 = DDR0_43_APREBIT_ENCODE(10) |
+	    DDR0_43_COLUMN_SIZE_ENCODE(12 - cols) |
+	    DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0);
+
+	/*------------------------------------------------------------------
+	 * Handle the timing.  We need to find the worst case timing of all
+	 * the dimm modules installed.
+	 *-----------------------------------------------------------------*/
+	/* loop through all the DIMM slots on the board */
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		/* If a dimm is installed in a particular slot ... */
+		if (dimm_ranks[dimm_num]) {
+			unsigned long ps;
+
+			ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 36);
+			t_wr_ps = max(t_wr_ps, ps);
+		}
+	}
+	debug("t_wr_ps = %d\n", t_wr_ps);
+	t_wr_clk = (MULDIV64(sdram_freq, t_wr_ps, ONE_BILLION) + 999) / 1000;
+	mtsdram(DDR0_43, ddr0_43 | DDR0_43_TWR_ENCODE(t_wr_clk));
+}
+
+static void program_ddr0_44(unsigned long dimm_ranks[],
+			    unsigned char const iic0_dimm_addr[],
+			    unsigned long num_dimm_banks,
+			    unsigned long sdram_freq)
+{
+	unsigned long dimm_num;
+	unsigned long t_rcd_ps = 0;
+	unsigned long t_rcd_clk;
+
+	/*------------------------------------------------------------------
+	 * Handle the timing.  We need to find the worst case timing of all
+	 * the dimm modules installed.
+	 *-----------------------------------------------------------------*/
+	/* loop through all the DIMM slots on the board */
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		/* If a dimm is installed in a particular slot ... */
+		if (dimm_ranks[dimm_num]) {
+			unsigned long ps;
+
+			ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 29);
+			t_rcd_ps = max(t_rcd_ps, ps);
+		}
+	}
+	debug("t_rcd_ps = %d\n", t_rcd_ps);
+	t_rcd_clk = (MULDIV64(sdram_freq, t_rcd_ps, ONE_BILLION) + 999) / 1000;
+	mtsdram(DDR0_44, DDR0_44_TRCD_ENCODE(t_rcd_clk));
+}
+
+/*-----------------------------------------------------------------------------+
+ * initdram.  Initializes the 440EPx/GPx DDR SDRAM controller.
+ * Note: This routine runs from flash with a stack set up in the chip's
+ * sram space.  It is important that the routine does not require .sbss, .bss or
+ * .data sections.  It also cannot call routines that require these sections.
+ *-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function:	 initdram
+ * Description:  Configures SDRAM memory banks for DDR operation.
+ *		 Auto Memory Configuration option reads the DDR SDRAM EEPROMs
+ *		 via the IIC bus and then configures the DDR SDRAM memory
+ *		 banks appropriately. If Auto Memory Configuration is
+ *		 not used, it is assumed that no DIMM is plugged
+ *-----------------------------------------------------------------------------*/
+long int initdram(int board_type)
+{
+	unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+	unsigned long dimm_ranks[MAXDIMMS];
+	unsigned long ranks;
+	unsigned long rows;
+	unsigned long banks;
+	unsigned long cols;
+	unsigned long width;
+	unsigned long const sdram_freq = get_bus_freq(0);
+	unsigned long const num_dimm_banks = sizeof(iic0_dimm_addr);	/* on board dimm banks */
+	unsigned long cas_latency = 0;	/* to quiet initialization warning */
+	unsigned long dram_size;
+
+	debug("\nEntering initdram()\n");
+
+	/*------------------------------------------------------------------
+	 * Stop the DDR-SDRAM controller.
+	 *-----------------------------------------------------------------*/
+	mtsdram(DDR0_02, DDR0_02_START_ENCODE(0));
+
+	/*
+	 * Make sure I2C controller is initialized
+	 * before continuing.
+	 */
+	/* switch to correct I2C bus */
+	I2C_SET_BUS(CFG_SPD_BUS_NUM);
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	/*------------------------------------------------------------------
+	 * Clear out the serial presence detect buffers.
+	 * Perform IIC reads from the dimm.  Fill in the spds.
+	 * Check to see if the dimm slots are populated
+	 *-----------------------------------------------------------------*/
+	get_spd_info(dimm_ranks, &ranks, iic0_dimm_addr, num_dimm_banks);
+
+	/*------------------------------------------------------------------
+	 * Check the frequency supported for the dimms plugged.
+	 *-----------------------------------------------------------------*/
+	check_frequency(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+	/*------------------------------------------------------------------
+	 * Check and get size information.
+	 *-----------------------------------------------------------------*/
+	get_dimm_size(dimm_ranks, iic0_dimm_addr, num_dimm_banks, &rows, &banks,
+		      &cols, &width);
+
+	/*------------------------------------------------------------------
+	 * Check the voltage type for the dimms plugged.
+	 *-----------------------------------------------------------------*/
+	check_voltage_type(dimm_ranks, iic0_dimm_addr, num_dimm_banks);
+
+	/*------------------------------------------------------------------
+	 * Program registers for SDRAM controller.
+	 *-----------------------------------------------------------------*/
+	mtsdram(DDR0_00, DDR0_00_DLL_INCREMENT_ENCODE(0x19) |
+		DDR0_00_DLL_START_POINT_DECODE(0x0A));
+
+	mtsdram(DDR0_01, DDR0_01_PLB0_DB_CS_LOWER_ENCODE(0x01) |
+		DDR0_01_PLB0_DB_CS_UPPER_ENCODE(0x00) |
+		DDR0_01_INT_MASK_ENCODE(0xFF));
+
+	program_ddr0_03(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
+			rows, &cas_latency);
+
+	program_ddr0_04(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+	program_ddr0_05(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+	program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+	/*------------------------------------------------------------------
+	 * TODO: tFAW not found in SPD.  Value of 13 taken from Sequoia
+	 * board SDRAM, but may be overly concervate.
+	 *-----------------------------------------------------------------*/
+	mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) |
+		DDR0_07_TFAW_ENCODE(13) |
+		DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) |
+		DDR0_07_AREFRESH_ENCODE(0));
+
+	mtsdram(DDR0_08, DDR0_08_WRLAT_ENCODE(cas_latency - 1) |
+		DDR0_08_TCPD_ENCODE(200) | DDR0_08_DQS_N_EN_ENCODE(0) |
+		DDR0_08_DDRII_ENCODE(1));
+
+	mtsdram(DDR0_09, DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(0x00) |
+		DDR0_09_RTT_0_ENCODE(0x1) |
+		DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(0x1D) |
+		DDR0_09_WR_DQS_SHIFT_ENCODE(DQS_OUT_SHIFT - 0x20));
+
+	program_ddr0_10(dimm_ranks, ranks);
+
+	program_ddr0_11(sdram_freq);
+
+	mtsdram(DDR0_12, DDR0_12_TCKE_ENCODE(3));
+
+	mtsdram(DDR0_14, DDR0_14_DLL_BYPASS_MODE_ENCODE(0) |
+		DDR0_14_REDUC_ENCODE(width <= 40 ? 1 : 0) |
+		DDR0_14_REG_DIMM_ENABLE_ENCODE(0));
+
+	mtsdram(DDR0_17, DDR0_17_DLL_DQS_DELAY_0_ENCODE(DLL_DQS_DELAY));
+
+	mtsdram(DDR0_18, DDR0_18_DLL_DQS_DELAY_4_ENCODE(DLL_DQS_DELAY) |
+		DDR0_18_DLL_DQS_DELAY_3_ENCODE(DLL_DQS_DELAY) |
+		DDR0_18_DLL_DQS_DELAY_2_ENCODE(DLL_DQS_DELAY) |
+		DDR0_18_DLL_DQS_DELAY_1_ENCODE(DLL_DQS_DELAY));
+
+	mtsdram(DDR0_19, DDR0_19_DLL_DQS_DELAY_8_ENCODE(DLL_DQS_DELAY) |
+		DDR0_19_DLL_DQS_DELAY_7_ENCODE(DLL_DQS_DELAY) |
+		DDR0_19_DLL_DQS_DELAY_6_ENCODE(DLL_DQS_DELAY) |
+		DDR0_19_DLL_DQS_DELAY_5_ENCODE(DLL_DQS_DELAY));
+
+	mtsdram(DDR0_20, DDR0_20_DLL_DQS_BYPASS_3_ENCODE(DLL_DQS_BYPASS) |
+		DDR0_20_DLL_DQS_BYPASS_2_ENCODE(DLL_DQS_BYPASS) |
+		DDR0_20_DLL_DQS_BYPASS_1_ENCODE(DLL_DQS_BYPASS) |
+		DDR0_20_DLL_DQS_BYPASS_0_ENCODE(DLL_DQS_BYPASS));
+
+	mtsdram(DDR0_21, DDR0_21_DLL_DQS_BYPASS_7_ENCODE(DLL_DQS_BYPASS) |
+		DDR0_21_DLL_DQS_BYPASS_6_ENCODE(DLL_DQS_BYPASS) |
+		DDR0_21_DLL_DQS_BYPASS_5_ENCODE(DLL_DQS_BYPASS) |
+		DDR0_21_DLL_DQS_BYPASS_4_ENCODE(DLL_DQS_BYPASS));
+
+	program_ddr0_22(dimm_ranks, iic0_dimm_addr, num_dimm_banks, width);
+
+	mtsdram(DDR0_23, DDR0_23_ODT_RD_MAP_CS0_ENCODE(0x0) |
+		DDR0_23_FWC_ENCODE(0));
+
+	program_ddr0_24(ranks);
+
+	program_ddr0_26(sdram_freq);
+
+	program_ddr0_27(sdram_freq);
+
+	mtsdram(DDR0_28, DDR0_28_EMRS3_DATA_ENCODE(0x0000) |
+		DDR0_28_EMRS2_DATA_ENCODE(0x0000));
+
+	mtsdram(DDR0_31, DDR0_31_XOR_CHECK_BITS_ENCODE(0x0000));
+
+	mtsdram(DDR0_42, DDR0_42_ADDR_PINS_DECODE(14 - rows) |
+		DDR0_42_CASLAT_LIN_GATE_ENCODE(2 * cas_latency));
+
+	program_ddr0_43(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
+			cols, banks);
+
+	program_ddr0_44(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+	denali_sdram_register_dump();
+
+	dram_size = (width >= 64) ? 8 : 4;
+	dram_size *= 1 << cols;
+	dram_size *= banks;
+	dram_size *= 1 << rows;
+	dram_size *= ranks;
+	debug("dram_size = %lu\n", dram_size);
+
+	/* Start the SDRAM controler */
+	mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
+	denali_wait_for_dlllock();
+
+#if defined(CONFIG_DDR_DATA_EYE)
+	/* -----------------------------------------------------------+
+	 * Perform data eye search if requested.
+	 * ----------------------------------------------------------*/
+	program_tlb(0, CFG_SDRAM_BASE, dram_size, TLB_WORD2_I_ENABLE);
+	denali_core_search_data_eye();
+	denali_sdram_register_dump();
+	remove_tlb(CFG_SDRAM_BASE, dram_size);
+#endif
+
+#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
+	program_tlb(0, CFG_SDRAM_BASE, dram_size, 0);
+	sync();
+	eieio();
+	/* Zero the memory */
+	debug("Zeroing SDRAM...");
+	dcbz_area(CFG_SDRAM_BASE, dram_size);
+	dflush();
+	debug("Completed\n");
+	sync();
+	eieio();
+	remove_tlb(CFG_SDRAM_BASE, dram_size);
+
+#if defined(CONFIG_DDR_ECC)
+	/*
+	 * If ECC is enabled, clear and enable interrupts
+	 */
+	if (is_ecc_enabled()) {
+		u32 val;
+
+		sync();
+		eieio();
+		/* Clear error status */
+		mfsdram(DDR0_00, val);
+		mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+		/* Set 'int_mask' parameter to functionnal value */
+		mfsdram(DDR0_01, val);
+		mtsdram(DDR0_01, (val & ~DDR0_01_INT_MASK_MASK) |
+			DDR0_01_INT_MASK_ALL_OFF);
+#if defined(CONFIG_DDR_DATA_EYE)
+		/*
+		 * Running denali_core_search_data_eye() when ECC is enabled
+		 * causes non-ECC machine checks.  This clears them.
+		 */
+		print_mcsr();
+		mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
+		print_mcsr();
+#endif
+		sync();
+		eieio();
+	}
+#endif /* defined(CONFIG_DDR_ECC) */
+#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
+
+	program_tlb(0, CFG_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
+	return dram_size;
+}
+
+void board_add_ram_info(int use_default)
+{
+	u32 val;
+
+	printf(" (ECC");
+	if (!is_ecc_enabled()) {
+		printf(" not");
+	}
+	printf(" enabled, %d MHz", (2 * get_bus_freq(0)) / 1000000);
+
+	mfsdram(DDR0_03, val);
+	printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
+}
+#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
new file mode 100644
index 000000000..afcb97406
--- /dev/null
+++ b/cpu/ppc4xx/fdt.c
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+	sys_info_t sys_info;
+
+	get_sys_info(&sys_info);
+
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
+			     bd->bi_intfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
+			     bd->bi_intfreq, 1);
+	do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
+	do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
+	do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
+			     sys_info.freqEBC, 1);
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+	/*
+	 * Setup all baudrates for the UARTs
+	 */
+	do_fixup_by_compat_u32(blob, "ns16550", "clock-frequency", gd->uart_clk, 1);
+
+	/*
+	 * Fixup all ethernet nodes
+	 * Note: aliases in the dts are required for this
+	 */
+	fdt_fixup_ethernet(blob, bd);
+}
+#endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index 50f2fdf11..7b09a2f7d 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -26,8 +26,8 @@
 #include <asm/io.h>
 #include <asm/gpio.h>
 
-#if defined(CFG_440_GPIO_TABLE)
-gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_440_GPIO_TABLE;
+#if defined(CFG_4xx_GPIO_TABLE)
+gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_4xx_GPIO_TABLE;
 #endif
 
 #if defined(GPIO0_OSRL)
@@ -47,7 +47,7 @@ void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
 	}
 
 	if (pin >= GPIO_MAX/2) {
-		offs2 = 0x100;
+		offs2 = 0x4;
 		pin2 = (pin - GPIO_MAX/2) << 1;
 	}
 
@@ -55,10 +55,10 @@ void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
 	mask2 = 0xc0000000 >> (pin2 << 1);
 
 	/* first set TCR to 0 */
-	out32(GPIO0_TCR + offs, in32(GPIO0_TCR + offs) & ~mask);
+	out_be32((void *)GPIO0_TCR + offs, in_be32((void *)GPIO0_TCR + offs) & ~mask);
 
 	if (in_out == GPIO_OUT) {
-		val = in32(GPIO0_OSRL + offs + offs2) & ~mask2;
+		val = in_be32((void *)GPIO0_OSRL + offs + offs2) & ~mask2;
 		switch (gpio_alt) {
 		case GPIO_ALT1:
 			val |= GPIO_ALT1_SEL >> pin2;
@@ -70,20 +70,23 @@ void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
 			val |= GPIO_ALT3_SEL >> pin2;
 			break;
 		}
-		out32(GPIO0_OSRL + offs + offs2, val);
+		out_be32((void *)GPIO0_OSRL + offs + offs2, val);
 
 		/* setup requested output value */
 		if (out_val == GPIO_OUT_0)
-			out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~mask);
+			out_be32((void *)GPIO0_OR + offs,
+				 in_be32((void *)GPIO0_OR + offs) & ~mask);
 		else if (out_val == GPIO_OUT_1)
-			out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) | mask);
+			out_be32((void *)GPIO0_OR + offs,
+				 in_be32((void *)GPIO0_OR + offs) | mask);
 
 		/* now configure TCR to drive output if selected */
-		out32(GPIO0_TCR + offs, in32(GPIO0_TCR + offs) | mask);
+		out_be32((void *)GPIO0_TCR + offs,
+			 in_be32((void *)GPIO0_TCR + offs) | mask);
 	} else {
-		val = in32(GPIO0_ISR1L + offs + offs2) & ~mask2;
+		val = in_be32((void *)GPIO0_ISR1L + offs + offs2) & ~mask2;
 		val |= GPIO_IN_SEL >> pin2;
-		out32(GPIO0_ISR1L + offs + offs2, val);
+		out_be32((void *)GPIO0_ISR1L + offs + offs2, val);
 	}
 }
 #endif /* GPIO_OSRL */
@@ -98,9 +101,11 @@ void gpio_write_bit(int pin, int val)
 	}
 
 	if (val)
-		out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) | GPIO_VAL(pin));
+		out_be32((void *)GPIO0_OR + offs,
+			 in_be32((void *)GPIO0_OR + offs) | GPIO_VAL(pin));
 	else
-		out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~GPIO_VAL(pin));
+		out_be32((void *)GPIO0_OR + offs,
+			 in_be32((void *)GPIO0_OR + offs) & ~GPIO_VAL(pin));
 }
 
 int gpio_read_out_bit(int pin)
@@ -112,10 +117,10 @@ int gpio_read_out_bit(int pin)
 		pin -= GPIO_MAX;
 	}
 
-	return (in32(GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
+	return (in_be32((void *)GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
 }
 
-#if defined(CFG_440_GPIO_TABLE)
+#if defined(CFG_4xx_GPIO_TABLE)
 void gpio_set_chip_configuration(void)
 {
 	unsigned char i=0, j=0, offs=0, gpio_core;
@@ -141,24 +146,24 @@ void gpio_set_chip_configuration(void)
 					break;
 
 				case GPIO_ALT1:
-					reg = in32(GPIO_IS1(core_add+offs))
+					reg = in_be32((void *)GPIO_IS1(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_IN_SEL >> (j*2));
-					out32(GPIO_IS1(core_add+offs), reg);
+					out_be32((void *)GPIO_IS1(core_add+offs), reg);
 					break;
 
 				case GPIO_ALT2:
-					reg = in32(GPIO_IS2(core_add+offs))
+					reg = in_be32((void *)GPIO_IS2(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_IN_SEL >> (j*2));
-					out32(GPIO_IS2(core_add+offs), reg);
+					out_be32((void *)GPIO_IS2(core_add+offs), reg);
 					break;
 
 				case GPIO_ALT3:
-					reg = in32(GPIO_IS3(core_add+offs))
+					reg = in_be32((void *)GPIO_IS3(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_IN_SEL >> (j*2));
-					out32(GPIO_IS3(core_add+offs), reg);
+					out_be32((void *)GPIO_IS3(core_add+offs), reg);
 					break;
 				}
 			}
@@ -168,87 +173,66 @@ void gpio_set_chip_configuration(void)
 
 				switch (gpio_tab[gpio_core][i].alt_nb) {
 				case GPIO_SEL:
-					if (gpio_core == GPIO0) {
-						/*
-						 * Setup output value
-						 * 1 -> high level
-						 * 0 -> low level
-						 * else -> don't touch
-						 */
-						reg = in32(GPIO0_OR);
-						if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
-							reg |= (0x80000000 >> (i));
-						else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
-							reg &= ~(0x80000000 >> (i));
-						out32(GPIO0_OR, reg);
-
-						reg = in32(GPIO0_TCR) | (0x80000000 >> (i));
-						out32(GPIO0_TCR, reg);
-					}
-
-#ifdef GPIO1
-					if (gpio_core == GPIO1) {
-						/*
-						 * Setup output value
-						 * 1 -> high level
-						 * 0 -> low level
-						 * else -> don't touch
-						 */
-						reg = in32(GPIO1_OR);
-						if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
-							reg |= (0x80000000 >> (i));
-						else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
-							reg &= ~(0x80000000 >> (i));
-						out32(GPIO1_OR, reg);
-
-						reg = in32(GPIO1_TCR) | (0x80000000 >> (i));
-						out32(GPIO1_TCR, reg);
-					}
-#endif /* GPIO1 */
-
-					reg = in32(GPIO_OS(core_add+offs))
+					/*
+					 * Setup output value
+					 * 1 -> high level
+					 * 0 -> low level
+					 * else -> don't touch
+					 */
+					reg = in_be32((void *)GPIO_OR(core_add));
+					if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
+						reg |= (0x80000000 >> (i));
+					else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
+						reg &= ~(0x80000000 >> (i));
+					out_be32((void *)GPIO_OR(core_add), reg);
+
+					reg = in_be32((void *)GPIO_TCR(core_add)) |
+						(0x80000000 >> (i));
+					out_be32((void *)GPIO_TCR(core_add), reg);
+
+					reg = in_be32((void *)GPIO_OS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
-					out32(GPIO_OS(core_add+offs), reg);
-					reg = in32(GPIO_TS(core_add+offs))
+					out_be32((void *)GPIO_OS(core_add+offs), reg);
+					reg = in_be32((void *)GPIO_TS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
-					out32(GPIO_TS(core_add+offs), reg);
+					out_be32((void *)GPIO_TS(core_add+offs), reg);
 					break;
 
 				case GPIO_ALT1:
-					reg = in32(GPIO_OS(core_add+offs))
+					reg = in_be32((void *)GPIO_OS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_ALT1_SEL >> (j*2));
-					out32(GPIO_OS(core_add+offs), reg);
-					reg = in32(GPIO_TS(core_add+offs))
+					out_be32((void *)GPIO_OS(core_add+offs), reg);
+					reg = in_be32((void *)GPIO_TS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_ALT1_SEL >> (j*2));
-					out32(GPIO_TS(core_add+offs), reg);
+					out_be32((void *)GPIO_TS(core_add+offs), reg);
 					break;
 
 				case GPIO_ALT2:
-					reg = in32(GPIO_OS(core_add+offs))
+					reg = in_be32((void *)GPIO_OS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_ALT2_SEL >> (j*2));
-					out32(GPIO_OS(core_add+offs), reg);
-					reg = in32(GPIO_TS(core_add+offs))
+					out_be32((void *)GPIO_OS(core_add+offs), reg);
+					reg = in_be32((void *)GPIO_TS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_ALT2_SEL >> (j*2));
-					out32(GPIO_TS(core_add+offs), reg);
+					out_be32((void *)GPIO_TS(core_add+offs), reg);
 					break;
 
 				case GPIO_ALT3:
-					reg = in32(GPIO_OS(core_add+offs))
+					reg = in_be32((void *)GPIO_OS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_ALT3_SEL >> (j*2));
-					out32(GPIO_OS(core_add+offs), reg);
-					reg = in32(GPIO_TS(core_add+offs))
+					out_be32((void *)GPIO_OS(core_add+offs), reg);
+					reg = in_be32((void *)GPIO_TS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
 					reg = reg | (GPIO_ALT3_SEL >> (j*2));
-					out32(GPIO_TS(core_add+offs), reg);
+					out_be32((void *)GPIO_TS(core_add+offs), reg);
 					break;
 				}
 			}
 		}
 	}
 }
-#endif /* CFG_440_GPIO_TABLE */
+#endif /* CFG_4xx_GPIO_TABLE */
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index ca565cc3e..2026cc927 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -52,7 +52,7 @@ struct	irq_action {
 static struct irq_action irq_vecs[32];
 void uic0_interrupt( void * parms); /* UIC0 handler */
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 static struct irq_action irq_vecs1[32]; /* For UIC1 */
 
 void uic1_interrupt( void * parms); /* UIC1 handler */
@@ -116,7 +116,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 		irq_vecs[vec].handler = NULL;
 		irq_vecs[vec].arg = NULL;
 		irq_vecs[vec].count = 0;
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 		irq_vecs1[vec].handler = NULL;
 		irq_vecs1[vec].arg = NULL;
 		irq_vecs1[vec].count = 0;
@@ -172,7 +172,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 	 */
 	set_evpr(0x00000000);
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 #if !defined(CONFIG_440GX)
 	/* Install the UIC1 handlers */
 	irq_install_handler(VECNUM_UIC1NC, uic1_interrupt, 0);
@@ -378,7 +378,7 @@ void uic0_interrupt( void * parms)
 
 #endif /* CONFIG_440GX */
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 /* Handler for UIC1 interrupt */
 void uic1_interrupt( void * parms)
 {
@@ -525,7 +525,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
 	struct irq_action *irqa = irq_vecs;
 	int i = vec;
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	if ((vec > 31) && (vec < 64)) {
@@ -553,7 +553,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
 	irqa[i].handler = handler;
 	irqa[i].arg = arg;
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	if ((vec > 31) && (vec < 64))
@@ -577,7 +577,7 @@ void irq_free_handler (int vec)
 	struct irq_action *irqa = irq_vecs;
 	int i = vec;
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	if ((vec > 31) && (vec < 64)) {
@@ -599,7 +599,7 @@ void irq_free_handler (int vec)
 		vec, irq_vecs[vec].handler);
 #endif
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	if ((vec > 31) && (vec < 64))
@@ -641,7 +641,7 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	int vec;
 
 	printf ("\nInterrupt-Information:\n");
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 	printf ("\nUIC 0\n");
 #endif
 	printf ("Nr  Routine   Arg       Count\n");
@@ -656,7 +656,7 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		}
 	}
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 	printf ("\nUIC 1\n");
 	printf ("Nr  Routine   Arg       Count\n");
 
diff --git a/cpu/ppc4xx/iop480_uart.c b/cpu/ppc4xx/iop480_uart.c
new file mode 100644
index 000000000..8dd226729
--- /dev/null
+++ b/cpu/ppc4xx/iop480_uart.c
@@ -0,0 +1,238 @@
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <watchdog.h>
+#include "vecnum.h"
+
+#ifdef CONFIG_SERIAL_MULTI
+#include <serial.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_IOP480
+
+#define SPU_BASE         0x40000000
+
+#define spu_LineStat_rc  0x00	/* Line Status Register (Read/Clear) */
+#define spu_LineStat_w   0x04	/* Line Status Register (Set) */
+#define spu_Handshk_rc   0x08	/* Handshake Status Register (Read/Clear) */
+#define spu_Handshk_w    0x0c	/* Handshake Status Register (Set) */
+#define spu_BRateDivh    0x10	/* Baud rate divisor high */
+#define spu_BRateDivl    0x14	/* Baud rate divisor low */
+#define spu_CtlReg       0x18	/* Control Register */
+#define spu_RxCmd        0x1c	/* Rx Command Register */
+#define spu_TxCmd        0x20	/* Tx Command Register */
+#define spu_RxBuff       0x24	/* Rx data buffer */
+#define spu_TxBuff       0x24	/* Tx data buffer */
+
+/*-----------------------------------------------------------------------------+
+  | Line Status Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncLSRport1           0x40000000
+#define asyncLSRport1set        0x40000004
+#define asyncLSRDataReady             0x80
+#define asyncLSRFramingError          0x40
+#define asyncLSROverrunError          0x20
+#define asyncLSRParityError           0x10
+#define asyncLSRBreakInterrupt        0x08
+#define asyncLSRTxHoldEmpty           0x04
+#define asyncLSRTxShiftEmpty          0x02
+
+/*-----------------------------------------------------------------------------+
+  | Handshake Status Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncHSRport1           0x40000008
+#define asyncHSRport1set        0x4000000c
+#define asyncHSRDsr                   0x80
+#define asyncLSRCts                   0x40
+
+/*-----------------------------------------------------------------------------+
+  | Control Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncCRport1            0x40000018
+#define asyncCRNormal                 0x00
+#define asyncCRLoopback               0x40
+#define asyncCRAutoEcho               0x80
+#define asyncCRDtr                    0x20
+#define asyncCRRts                    0x10
+#define asyncCRWordLength7            0x00
+#define asyncCRWordLength8            0x08
+#define asyncCRParityDisable          0x00
+#define asyncCRParityEnable           0x04
+#define asyncCREvenParity             0x00
+#define asyncCROddParity              0x02
+#define asyncCRStopBitsOne            0x00
+#define asyncCRStopBitsTwo            0x01
+#define asyncCRDisableDtrRts          0x00
+
+/*-----------------------------------------------------------------------------+
+  | Receiver Command Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncRCRport1           0x4000001c
+#define asyncRCRDisable               0x00
+#define asyncRCREnable                0x80
+#define asyncRCRIntDisable            0x00
+#define asyncRCRIntEnabled            0x20
+#define asyncRCRDMACh2                0x40
+#define asyncRCRDMACh3                0x60
+#define asyncRCRErrorInt              0x10
+#define asyncRCRPauseEnable           0x08
+
+/*-----------------------------------------------------------------------------+
+  | Transmitter Command Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncTCRport1           0x40000020
+#define asyncTCRDisable               0x00
+#define asyncTCREnable                0x80
+#define asyncTCRIntDisable            0x00
+#define asyncTCRIntEnabled            0x20
+#define asyncTCRDMACh2                0x40
+#define asyncTCRDMACh3                0x60
+#define asyncTCRTxEmpty               0x10
+#define asyncTCRErrorInt              0x08
+#define asyncTCRStopPause             0x04
+#define asyncTCRBreakGen              0x02
+
+/*-----------------------------------------------------------------------------+
+  | Miscellanies defines.
+  +-----------------------------------------------------------------------------*/
+#define asyncTxBufferport1      0x40000024
+#define asyncRxBufferport1      0x40000024
+#define asyncDLABLsbport1       0x40000014
+#define asyncDLABMsbport1       0x40000010
+#define asyncXOFFchar                 0x13
+#define asyncXONchar                  0x11
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+int serial_init (void)
+{
+	volatile char val;
+	unsigned short br_reg;
+
+	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+	/*
+	 * Init onboard UART
+	 */
+	out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
+	out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
+	out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
+	out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08);	/* Set 8 bits, no parity and 1 stop bit */
+	out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0);	/* Enable Rx */
+	out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c);	/* Enable Tx */
+	out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
+	val = in_8((u8 *)SPU_BASE + spu_RxBuff);	/* Dummy read, to clear receiver */
+
+	return (0);
+}
+
+void serial_setbrg (void)
+{
+	unsigned short br_reg;
+
+	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+	out_8((u8 *)SPU_BASE + spu_BRateDivl,
+	      (br_reg & 0x00ff)); /* Set baud rate divisor... */
+	out_8((u8 *)SPU_BASE + spu_BRateDivh,
+	      ((br_reg & 0xff00) >> 8)); /* ... */
+}
+
+void serial_putc (const char c)
+{
+	if (c == '\n')
+		serial_putc ('\r');
+
+	/* load status from handshake register */
+	if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
+		out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
+
+	out_8((u8 *)SPU_BASE + spu_TxBuff, c);	/* Put char */
+
+	while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
+		if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
+			out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
+	}
+}
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+int serial_getc ()
+{
+	unsigned char status = 0;
+
+	while (1) {
+		status = in_8((u8 *)asyncLSRport1);
+		if ((status & asyncLSRDataReady) != 0x0) {
+			break;
+		}
+		if ((status & ( asyncLSRFramingError |
+				asyncLSROverrunError |
+				asyncLSRParityError  |
+				asyncLSRBreakInterrupt )) != 0) {
+			(void) out_8((u8 *)asyncLSRport1,
+				     asyncLSRFramingError |
+				     asyncLSROverrunError |
+				     asyncLSRParityError  |
+				     asyncLSRBreakInterrupt );
+		}
+	}
+	return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
+}
+
+int serial_tstc ()
+{
+	unsigned char status;
+
+	status = in_8((u8 *)asyncLSRport1);
+	if ((status & asyncLSRDataReady) != 0x0) {
+		return (1);
+	}
+	if ((status & ( asyncLSRFramingError |
+			asyncLSROverrunError |
+			asyncLSRParityError  |
+			asyncLSRBreakInterrupt )) != 0) {
+		(void) out_8((u8 *)asyncLSRport1,
+			     asyncLSRFramingError |
+			     asyncLSROverrunError |
+			     asyncLSRParityError  |
+			     asyncLSRBreakInterrupt);
+	}
+	return 0;
+}
+
+#endif	/* CONFIG_IOP480 */
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
index 8c4bbf2e4..42b9546d3 100644
--- a/cpu/ppc4xx/kgdb.S
+++ b/cpu/ppc4xx/kgdb.S
@@ -56,21 +56,21 @@ kgdb_flush_cache_all:
 
 	.globl	kgdb_flush_cache_range
 kgdb_flush_cache_range:
-	li	r5,CFG_CACHELINE_SIZE-1
+	li	r5,L1_CACHE_BYTES-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,CFG_CACHELINE_SHIFT
+	srwi.	r4,r4,L1_CACHE_SHIFT
 	beqlr
 	mtctr	r4
 	mr	r6,r3
 1:	dcbst	0,r3
-	addi	r3,r3,CFG_CACHELINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	sync			/* wait for dcbst's to get to ram */
 	mtctr	r4
 2:	icbi	0,r6
-	addi	r6,r6,CFG_CACHELINE_SIZE
+	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	2b
 	SYNC
 	blr
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index 6b9802530..4216f0bd4 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -27,23 +27,11 @@
   |
   |  Author:	 Mark Wisner
   |
-  |  Change Activity-
-  |
-  |  Date	 Description of Change					     BY
-  |  ---------	 ---------------------					     ---
-  |  05-May-99	 Created						     MKW
-  |  01-Jul-99	 Changed clock setting of sta_reg from 66Mhz to 50Mhz to
-  |		 better match OPB speed. Also modified delay times.	     JWB
-  |  29-Jul-99	 Added Full duplex support				     MKW
-  |  24-Aug-99	 Removed printf from dp83843_duplex()			     JWB
-  |  19-Jul-00	 Ported to esd cpci405					     sr
-  |  23-Dec-03	 Ported from miiphy.c to 440GX Travis Sawyer		     TBS
-  |		 <travis.sawyer@sandburst.com>
-  |
   +-----------------------------------------------------------------------------*/
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <ppc_asm.tmpl>
 #include <commproc.h>
 #include <ppc4xx_enet.h>
@@ -60,7 +48,6 @@ void miiphy_dump (char *devname, unsigned char addr)
 	unsigned long i;
 	unsigned short data;
 
-
 	for (i = 0; i < 0x1A; i++) {
 		if (miiphy_read (devname, addr, i, &data)) {
 			printf ("read error for reg %lx\n", i);
@@ -75,15 +62,86 @@ void miiphy_dump (char *devname, unsigned char addr)
 	}			/* end for loop */
 }				/* end dump */
 
-
 /***********************************************************/
 /* (Re)start autonegotiation				   */
 /***********************************************************/
 int phy_setup_aneg (char *devname, unsigned char addr)
 {
-	unsigned short ctl, adv;
+	u16 bmcr;
+
+#if defined(CONFIG_PHY_DYNAMIC_ANEG)
+	/*
+	 * Set up advertisement based on capablilities reported by the PHY.
+	 * This should work for both copper and fiber.
+	 */
+	u16 bmsr;
+#if defined(CONFIG_PHY_GIGE)
+	u16 exsr = 0x0000;
+#endif
+
+	miiphy_read (devname, addr, PHY_BMSR, &bmsr);
+
+#if defined(CONFIG_PHY_GIGE)
+	if (bmsr & PHY_BMSR_EXT_STAT)
+		miiphy_read (devname, addr, PHY_EXSR, &exsr);
+
+	if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
+		/* 1000BASE-X */
+		u16 anar = 0x0000;
+
+		if (exsr & PHY_EXSR_1000XF)
+			anar |= PHY_X_ANLPAR_FD;
+
+		if (exsr & PHY_EXSR_1000XH)
+			anar |= PHY_X_ANLPAR_HD;
+
+		miiphy_write (devname, addr, PHY_ANAR, anar);
+	} else
+#endif
+	{
+		u16 anar, btcr;
+
+		miiphy_read (devname, addr, PHY_ANAR, &anar);
+		anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
+			  PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
+
+		miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
+		btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
+
+		if (bmsr & PHY_BMSR_100T4)
+			anar |= PHY_ANLPAR_T4;
+
+		if (bmsr & PHY_BMSR_100TXF)
+			anar |= PHY_ANLPAR_TXFD;
+
+		if (bmsr & PHY_BMSR_100TXH)
+			anar |= PHY_ANLPAR_TX;
+
+		if (bmsr & PHY_BMSR_10TF)
+			anar |= PHY_ANLPAR_10FD;
+
+		if (bmsr & PHY_BMSR_10TH)
+			anar |= PHY_ANLPAR_10;
+
+		miiphy_write (devname, addr, PHY_ANAR, anar);
+
+#if defined(CONFIG_PHY_GIGE)
+		if (exsr & PHY_EXSR_1000TF)
+			btcr |= PHY_1000BTCR_1000FD;
+
+		if (exsr & PHY_EXSR_1000TH)
+			btcr |= PHY_1000BTCR_1000HD;
+
+		miiphy_write (devname, addr, PHY_1000BTCR, btcr);
+#endif
+	}
+
+#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+	/*
+	 * Set up standard advertisement
+	 */
+	u16 adv;
 
-	/* Setup standard advertise */
 	miiphy_read (devname, addr, PHY_ANAR, &adv);
 	adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
 		PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
@@ -94,15 +152,16 @@ int phy_setup_aneg (char *devname, unsigned char addr)
 	adv |= (0x0300);
 	miiphy_write (devname, addr, PHY_1000BTCR, adv);
 
+#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+
 	/* Start/Restart aneg */
-	miiphy_read (devname, addr, PHY_BMCR, &ctl);
-	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-	miiphy_write (devname, addr, PHY_BMCR, ctl);
+	miiphy_read (devname, addr, PHY_BMCR, &bmcr);
+	bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	miiphy_write (devname, addr, PHY_BMCR, bmcr);
 
 	return 0;
 }
 
-
 /***********************************************************/
 /* read a phy reg and return the value with a rc	   */
 /***********************************************************/
@@ -113,57 +172,70 @@ unsigned int miiphy_getemac_offset (void)
 	unsigned long eoffset;
 
 	/* Need to find out which mdi port we're using */
-	zmii = in32 (ZMII_FER);
+	zmii = in_be32((void *)ZMII_FER);
 
-	if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0))) {
+	if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
 		/* using port 0 */
 		eoffset = 0;
-	} else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1))) {
+
+	else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
 		/* using port 1 */
 		eoffset = 0x100;
-	} else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2))) {
+
+	else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
 		/* using port 2 */
 		eoffset = 0x400;
-	} else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3))) {
+
+	else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
 		/* using port 3 */
 		eoffset = 0x600;
-	} else {
+
+	else {
 		/* None of the mdi ports are enabled! */
 		/* enable port 0 */
 		zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
-		out32 (ZMII_FER, zmii);
+		out_be32((void *)ZMII_FER, zmii);
 		eoffset = 0;
 		/* need to soft reset port 0 */
-		zmii = in32 (EMAC_M0);
+		zmii = in_be32((void *)EMAC_M0);
 		zmii |= EMAC_M0_SRST;
-		out32 (EMAC_M0, zmii);
+		out_be32((void *)EMAC_M0, zmii);
 	}
 
 	return (eoffset);
 #else
+
+#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
+	unsigned long rgmii;
+	int devnum = 1;
+
+	rgmii = in_be32((void *)RGMII_FER);
+	if (rgmii & (1 << (19 - devnum)))
+		return 0x100;
+#endif
+
 	return 0;
 #endif
 }
 
-
-int emac4xx_miiphy_read (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short *value)
+int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+			 unsigned short *value)
 {
 	unsigned long sta_reg;	/* STA scratch area */
 	unsigned long i;
 	unsigned long emac_reg;
 
-
 	emac_reg = miiphy_getemac_offset ();
 	/* see if it is ready for 1000 nsec */
 	i = 0;
 
 	/* see if it is ready for  sec */
-	while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
+	while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) ==
+	       EMAC_STACR_OC_MASK) {
 		udelay (7);
 		if (i > 5) {
 #ifdef ET_DEBUG
-			sta_reg = in32 (EMAC_STACR + emac_reg);
+			sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
 			printf ("read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 			printf ("read err 1\n");
 #endif
@@ -174,11 +246,12 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
 	sta_reg = reg;		/* reg address */
 	/* set clock (50Mhz) and read flags */
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#if defined(CONFIG_IBM_EMAC4_V4)      /* EMAC4 V4 changed bit setting */
-		sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
+#if defined(CONFIG_IBM_EMAC4_V4)	/* EMAC4 V4 changed bit setting */
+	sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
 #else
-		sta_reg |= EMAC_STACR_READ;
+	sta_reg |= EMAC_STACR_READ;
 #endif
 #else
 	sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
@@ -186,49 +259,47 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
 
 #if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
     !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
-    !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+    !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+    !defined(CONFIG_405EX)
 	sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
 #endif
 	sta_reg = sta_reg | (addr << 5);	/* Phy address */
 	sta_reg = sta_reg | EMAC_STACR_OC_MASK;	/* new IBM emac v4 */
-	out32 (EMAC_STACR + emac_reg, sta_reg);
+	out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
 #ifdef ET_DEBUG
 	printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 #endif
 
-	sta_reg = in32 (EMAC_STACR + emac_reg);
+	sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
 #ifdef ET_DEBUG
-		printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
+	printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 #endif
 	i = 0;
 	while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
 		udelay (7);
-		if (i > 5) {
+		if (i > 5)
 			return -1;
-		}
+
 		i++;
-		sta_reg = in32 (EMAC_STACR + emac_reg);
+		sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
 #ifdef ET_DEBUG
 		printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 #endif
 	}
-	if ((sta_reg & EMAC_STACR_PHYE) != 0) {
+	if ((sta_reg & EMAC_STACR_PHYE) != 0)
 		return -1;
-	}
 
-	*value = *(short *) (&sta_reg);
+	*value = *(short *)(&sta_reg);
 	return 0;
 
-
 }				/* phy_read */
 
-
 /***********************************************************/
 /* write a phy reg and return the value with a rc	    */
 /***********************************************************/
 
-int emac4xx_miiphy_write (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
+int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+			  unsigned short value)
 {
 	unsigned long sta_reg;	/* STA scratch area */
 	unsigned long i;
@@ -238,9 +309,11 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
 	/* see if it is ready for 1000 nsec */
 	i = 0;
 
-	while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
+	while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) ==
+	       EMAC_STACR_OC_MASK) {
 		if (i > 5)
 			return -1;
+
 		udelay (7);
 		i++;
 	}
@@ -248,11 +321,12 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
 	sta_reg = reg;		/* reg address */
 	/* set clock (50Mhz) and read flags */
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#if defined(CONFIG_IBM_EMAC4_V4)      /* EMAC4 V4 changed bit setting */
-		sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
+#if defined(CONFIG_IBM_EMAC4_V4)	/* EMAC4 V4 changed bit setting */
+	sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
 #else
-		sta_reg |= EMAC_STACR_WRITE;
+	sta_reg |= EMAC_STACR_WRITE;
 #endif
 #else
 	sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
@@ -260,27 +334,29 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
 
 #if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
     !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
-    !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+    !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+    !defined(CONFIG_405EX)
 	sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;	/* Set clock frequency (PLB freq. dependend) */
 #endif
-	sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */
-	sta_reg = sta_reg | EMAC_STACR_OC_MASK;		/* new IBM emac v4 */
+	sta_reg = sta_reg | ((unsigned long)addr << 5);	/* Phy address */
+	sta_reg = sta_reg | EMAC_STACR_OC_MASK;	/* new IBM emac v4 */
 	memcpy (&sta_reg, &value, 2);	/* put in data */
 
-	out32 (EMAC_STACR + emac_reg, sta_reg);
+	out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
 
 	/* wait for completion */
 	i = 0;
-	sta_reg = in32 (EMAC_STACR + emac_reg);
+	sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
 #ifdef ET_DEBUG
-		printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
+	printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 #endif
 	while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
 		udelay (7);
 		if (i > 5)
 			return -1;
+
 		i++;
-		sta_reg = in32 (EMAC_STACR + emac_reg);
+		sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
 #ifdef ET_DEBUG
 		printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 #endif
@@ -288,6 +364,7 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
 
 	if ((sta_reg & EMAC_STACR_PHYE) != 0)
 		return -1;
+
 	return 0;
 
-}				/* phy_write */
+} /* phy_write */
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 398457726..ec1b38cff 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -34,7 +34,7 @@
 #if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
 	(defined(CONFIG_440EP) || defined(CONFIG_440GR) ||	     \
 	 defined(CONFIG_440EPX) || defined(CONFIG_440GRX) ||	     \
-	 defined(CONFIG_405EZ))
+	 defined(CONFIG_405EZ) || defined(CONFIG_405EX))
 
 #include <nand.h>
 #include <linux/mtd/ndfc.h>
@@ -222,6 +222,7 @@ int board_nand_init(struct nand_chip *nand)
 	 */
 	board_nand_select_device(nand, cs);
 	out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
+
 	return 0;
 }
 
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index da5330a36..90066142d 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2007
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR)
 
-void get_sys_info (PPC405_SYS_INFO * sysInfo)
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 {
 	unsigned long pllmr;
 	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
@@ -162,6 +162,8 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 			sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
 		}
 	}
+
+	sysInfo->freqUART = sysInfo->freqProcessor;
 }
 
 
@@ -173,7 +175,7 @@ ulong get_OPB_freq (void)
 {
 	ulong val = 0;
 
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	get_sys_info (&sys_info);
 	val = sys_info.freqPLB / sys_info.pllOpbDiv;
@@ -189,7 +191,7 @@ ulong get_OPB_freq (void)
 ulong get_PCI_freq (void)
 {
 	ulong val;
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	get_sys_info (&sys_info);
 	val = sys_info.freqPLB / sys_info.pllPciDiv;
@@ -216,7 +218,7 @@ void get_sys_info (sys_info_t *sysInfo)
 	*/
 
 	/* Decode CPR0_PLLD0 for divisors */
-	mfclk(clk_plld, reg);
+	mfcpr(clk_plld, reg);
 	temp = (reg & PLLD_FWDVA_MASK) >> 16;
 	sysInfo->pllFwdDivA = temp ? temp : 16;
 	temp = (reg & PLLD_FWDVB_MASK) >> 8;
@@ -225,19 +227,19 @@ void get_sys_info (sys_info_t *sysInfo)
 	sysInfo->pllFbkDiv = temp ? temp : 32;
 	lfdiv = reg & PLLD_LFBDV_MASK;
 
-	mfclk(clk_opbd, reg);
+	mfcpr(clk_opbd, reg);
 	temp = (reg & OPBDDV_MASK) >> 24;
 	sysInfo->pllOpbDiv = temp ? temp : 4;
 
-	mfclk(clk_perd, reg);
+	mfcpr(clk_perd, reg);
 	temp = (reg & PERDV_MASK) >> 24;
 	sysInfo->pllExtBusDiv = temp ? temp : 8;
 
-	mfclk(clk_primbd, reg);
+	mfcpr(clk_primbd, reg);
 	temp = (reg & PRBDV_MASK) >> 24;
 	prbdv0 = temp ? temp : 8;
 
-	mfclk(clk_spcid, reg);
+	mfcpr(clk_spcid, reg);
 	temp = (reg & SPCID_MASK) >> 24;
 	sysInfo->pllPciDiv = temp ? temp : 4;
 
@@ -246,7 +248,7 @@ void get_sys_info (sys_info_t *sysInfo)
 	temp = (reg & PLLSYS0_SEL_MASK) >> 27;
 	if (temp == 0) { /* PLL output */
 		/* Figure which pll to use */
-		mfclk(clk_pllc, reg);
+		mfcpr(clk_pllc, reg);
 		temp = (reg & PLLC_SRC_MASK) >> 29;
 		if (!temp) /* PLLOUTA */
 			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
@@ -263,8 +265,9 @@ void get_sys_info (sys_info_t *sysInfo)
 	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
 	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
 	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
-	sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+	sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
 	sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+	sysInfo->freqUART = sysInfo->freqPLB;
 
 	/* Figure which timer source to use */
 	if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
@@ -277,6 +280,7 @@ void get_sys_info (sys_info_t *sysInfo)
 	else  /* Internal clock */
 		sysInfo->freqTmrClk = sysInfo->freqProcessor;
 }
+
 /********************************************
  * get_PCI_freq
  * return PCI bus freq in Hz
@@ -317,8 +321,8 @@ void get_sys_info (sys_info_t * sysInfo)
 	if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
 		sysInfo->freqPLB >>= 1;
 	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
-	sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-
+	sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+	sysInfo->freqUART = sysInfo->freqPLB;
 }
 #else
 void get_sys_info (sys_info_t * sysInfo)
@@ -393,7 +397,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
 	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
 	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
-	sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+	sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
 
 #if defined(CONFIG_YUCCA)
 	/* Determine PCI Clock Period */
@@ -403,7 +407,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
 #endif
 
-
+	sysInfo->freqUART = sysInfo->freqPLB;
 }
 
 #endif
@@ -632,7 +636,8 @@ extern void get_sys_info (sys_info_t * sysInfo);
 extern ulong get_PCI_freq (void);
 
 #elif defined(CONFIG_AP1000)
-void get_sys_info (sys_info_t * sysInfo) {
+void get_sys_info (sys_info_t * sysInfo)
+{
 	sysInfo->freqProcessor = 240 * 1000 * 1000;
 	sysInfo->freqPLB = 80 * 1000 * 1000;
 	sysInfo->freqPCI = 33 * 1000 * 1000;
@@ -640,17 +645,16 @@ void get_sys_info (sys_info_t * sysInfo) {
 
 #elif defined(CONFIG_405)
 
-void get_sys_info (sys_info_t * sysInfo) {
-
+void get_sys_info (sys_info_t * sysInfo)
+{
 	sysInfo->freqVCOMhz=3125000;
 	sysInfo->freqProcessor=12*1000*1000;
 	sysInfo->freqPLB=50*1000*1000;
 	sysInfo->freqPCI=66*1000*1000;
-
 }
 
 #elif defined(CONFIG_405EP)
-void get_sys_info (PPC405_SYS_INFO * sysInfo)
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 {
 	unsigned long pllmr0;
 	unsigned long pllmr1;
@@ -678,9 +682,8 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	 * Determine FBK_DIV.
 	 */
 	sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
-	if (sysInfo->pllFbkDiv == 0) {
+	if (sysInfo->pllFbkDiv == 0)
 		sysInfo->pllFbkDiv = 16;
-	}
 
 	/*
 	 * Determine PLB_DIV.
@@ -733,6 +736,10 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	 * Determine PLB clock frequency
 	 */
 	sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
+
+	sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
+
+	sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
 }
 
 
@@ -744,7 +751,7 @@ ulong get_OPB_freq (void)
 {
 	ulong val = 0;
 
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	get_sys_info (&sys_info);
 	val = sys_info.freqPLB / sys_info.pllOpbDiv;
@@ -760,7 +767,7 @@ ulong get_OPB_freq (void)
 ulong get_PCI_freq (void)
 {
 	ulong val;
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	get_sys_info (&sys_info);
 	val = sys_info.freqPLB / sys_info.pllPciDiv;
@@ -768,7 +775,7 @@ ulong get_PCI_freq (void)
 }
 
 #elif defined(CONFIG_405EZ)
-void get_sys_info (PPC405_SYS_INFO * sysInfo)
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 {
 	unsigned long cpr_plld;
 	unsigned long cpr_pllc;
@@ -806,6 +813,7 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	 * Read CPR_PRIMAD register
 	 */
 	mfcpr(cprprimad, cpr_primad);
+
 	/*
 	 * Determine PLB_DIV.
 	 */
@@ -856,6 +864,11 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	 */
 	sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
 		sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
+
+	sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
+		sysInfo->pllExtBusDiv;
+
+	sysInfo->freqUART = sysInfo->freqVCOHz;
 }
 
 /********************************************
@@ -866,7 +879,7 @@ ulong get_OPB_freq (void)
 {
 	ulong val = 0;
 
-	PPC405_SYS_INFO sys_info;
+	PPC4xx_SYS_INFO sys_info;
 
 	get_sys_info (&sys_info);
 	val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv;
@@ -874,13 +887,176 @@ ulong get_OPB_freq (void)
 	return val;
 }
 
+#elif defined(CONFIG_405EX)
+
+/*
+ * TODO: We need to get the CPR registers and calculate these values correctly!!!!
+ *   We need the specs!!!!
+ */
+static unsigned char get_fbdv(unsigned char index)
+{
+	unsigned char ret = 0;
+	/* This is table should be 256 bytes.
+	 * Only take first 52 values.
+	 */
+	unsigned char fbdv_tb[] = {
+		0x00, 0xff, 0x7f, 0xfd,
+		0x7a, 0xf5, 0x6a, 0xd5,
+		0x2a, 0xd4, 0x29, 0xd3,
+		0x26, 0xcc, 0x19, 0xb3,
+		0x67, 0xce, 0x1d, 0xbb,
+		0x77, 0xee, 0x5d, 0xba,
+		0x74, 0xe9, 0x52, 0xa5,
+		0x4b, 0x96, 0x2c, 0xd8,
+		0x31, 0xe3, 0x46, 0x8d,
+		0x1b, 0xb7, 0x6f, 0xde,
+		0x3d, 0xfb, 0x76, 0xed,
+		0x5a, 0xb5, 0x6b, 0xd6,
+		0x2d, 0xdb, 0x36, 0xec,
+
+	};
+
+	if ((index & 0x7f) == 0)
+		return 1;
+	while (ret < sizeof (fbdv_tb)) {
+		if (fbdv_tb[ret] == index)
+			break;
+		ret++;
+	}
+	ret++;
+
+	return ret;
+}
+
+#define PLL_FBK_PLL_LOCAL	0
+#define PLL_FBK_CPU		1
+#define PLL_FBK_PERCLK		5
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+	unsigned long m = 1;
+	unsigned int  tmp;
+	unsigned char fwdva[16] = {
+		1, 2, 14, 9, 4, 11, 16, 13,
+		12, 5, 6, 15, 10, 7, 8, 3,
+	};
+	unsigned char sel, cpudv0, plb2xDiv;
+
+	mfcpr(cpr0_plld, tmp);
+
+	/*
+	 * Determine forward divider A
+	 */
+	sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)];	/* FWDVA */
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
+
+	/*
+	 * Determine PLBDV0
+	 */
+	sysInfo->pllPlbDiv = 2;
+
+	/*
+	 * Determine PERDV0
+	 */
+	mfcpr(cpr0_perd, tmp);
+	tmp = (tmp >> 24) & 0x03;
+	sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
+
+	/*
+	 * Determine OPBDV0
+	 */
+	mfcpr(cpr0_opbd, tmp);
+	tmp = (tmp >> 24) & 0x03;
+	sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
+
+	/* Determine PLB2XDV0 */
+	mfcpr(cpr0_plbd, tmp);
+	tmp = (tmp >> 16) & 0x07;
+	plb2xDiv = (tmp == 0) ? 8 : tmp;
+
+	/* Determine CPUDV0 */
+	mfcpr(cpr0_cpud, tmp);
+	tmp = (tmp >> 24) & 0x07;
+	cpudv0 = (tmp == 0) ? 8 : tmp;
+
+	/* Determine SEL(5:7) in CPR0_PLLC */
+	mfcpr(cpr0_pllc, tmp);
+	sel = (tmp >> 24) & 0x07;
+
+	/*
+	 * Determine the M factor
+	 * PLL local: M = FBDV
+	 * CPU clock: M = FBDV * FWDVA * CPUDV0
+	 * PerClk	: M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
+	 *
+	 */
+	switch (sel) {
+	case PLL_FBK_CPU:
+		m = sysInfo->pllFwdDiv * cpudv0;
+		break;
+	case PLL_FBK_PERCLK:
+		m = sysInfo->pllFwdDiv * plb2xDiv * 2
+			* sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
+		break;
+    	case PLL_FBK_PLL_LOCAL:
+		break;
+	default:
+		printf("%s unknown m\n", __FUNCTION__);
+		return;
+
+	}
+	m *= sysInfo->pllFbkDiv;
+
+	/*
+	 * Determine VCO clock frequency
+	 */
+	sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+		(unsigned long long)sysClkPeriodPs;
+
+	/*
+	 * Determine CPU clock frequency
+	 */
+	sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
+
+	/*
+	 * Determine PLB clock frequency, ddr1x should be the same
+	 */
+	sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
+	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+	sysInfo->freqDDR = sysInfo->freqPLB;
+	sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+	sysInfo->freqUART = sysInfo->freqPLB;
+}
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+	ulong val = 0;
+
+	PPC4xx_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = sys_info.freqPLB / sys_info.pllOpbDiv;
+
+	return val;
+}
+
 #endif
 
 int get_clocks (void)
 {
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
-    defined(CONFIG_440) || defined(CONFIG_405)
+    defined(CONFIG_405EX) || defined(CONFIG_405) || \
+    defined(CONFIG_440)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
@@ -907,7 +1083,8 @@ ulong get_bus_freq (ulong dummy)
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
-    defined(CONFIG_440) || defined(CONFIG_405)
+    defined(CONFIG_405EX) || defined(CONFIG_405) || \
+    defined(CONFIG_440)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 9626b65c8..52601ed70 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -800,7 +800,7 @@ _start:
 	/*----------------------------------------------------------------------- */
 	/* Enable two 128MB cachable regions. */
 	/*----------------------------------------------------------------------- */
-	addis	r1,r0,0x8000
+	addis	r1,r0,0xc000
 	addi	r1,r1,0x0001
 	mticcr	r1			/* instruction cache */
 
@@ -823,12 +823,23 @@ _start:
 /*****************************************************************************/
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
-    defined(CONFIG_405)
+    defined(CONFIG_405EX) || defined(CONFIG_405)
 	/*----------------------------------------------------------------------- */
 	/* Clear and set up some registers. */
 	/*----------------------------------------------------------------------- */
 	addi	r4,r0,0x0000
+#if !defined(CONFIG_405EX)
 	mtspr	sgr,r4
+#else
+	/*
+	 * On 405EX, completely clearing the SGR leads to PPC hangup
+	 * upon PCIe configuration access. The PCIe memory regions
+	 * need to be guarded!
+	 */
+	lis	r3,0x0000
+	ori	r3,r3,0x7FFC
+	mtspr	sgr,r3
+#endif
 	mtspr	dcwr,r4
 	mtesr	r4			/* clear Exception Syndrome Reg */
 	mttcr	r4			/* clear Timer Control Reg */
@@ -851,7 +862,7 @@ _start:
 	/*----------------------------------------------------------------------- */
 	/* Enable two 128MB cachable regions. */
 	/*----------------------------------------------------------------------- */
-	lis	r4,0x8000
+	lis	r4,0xc000
 	ori	r4,r4,0x0001
 	mticcr	r4			/* instruction cache */
 	isync
@@ -860,12 +871,34 @@ _start:
 	ori	r4,r4,0x0000
 	mtdccr	r4			/* data cache */
 
-#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) || defined(CONFIG_405EX)
 	/*----------------------------------------------------------------------- */
 	/* Tune the speed and size for flash CS0  */
 	/*----------------------------------------------------------------------- */
 	bl	ext_bus_cntlr_init
 #endif
+#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
+	/*
+	 * Boards like the Kilauea (405EX) don't have OCM and can't use
+	 * DCache for init-ram. So setup stack here directly after the
+	 * SDRAM is initialized.
+	 */
+	lis	r1, CFG_INIT_RAM_ADDR@h
+	ori	r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
+
+	li	r0, 0			/* Make room for stack frame header and */
+	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
+	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
+	/*
+	 * Set up a dummy frame to store reset vector as return address.
+	 * this causes stack underflow to reset board.
+	 */
+	stwu	r1, -8(r1)		/* Save back chain and move SP */
+	lis	r0, RESET_VECTOR@h	/* Address of reset vector */
+	ori	r0, r0, RESET_VECTOR@l
+	stwu	r1, -8(r1)		/* Save back chain and move SP */
+	stw	r0, +12(r1)		/* Save return addr (underflow vect) */
+#endif /* !(CFG_INIT_DCACHE_CS	|| !CFG_TEM_STACK_OCM) */
 
 #if defined(CONFIG_405EP)
 	/*----------------------------------------------------------------------- */
@@ -983,7 +1016,7 @@ start_ram:
 	ori	r4,r4,0xa000
 	mtdcr	ebccfgd,r4
 
-	/* turn on data chache for this region */
+	/* turn on data cache for this region */
 	lis	r4,0x0080
 	mtdccr	r4
 
@@ -1049,30 +1082,6 @@ start_ram:
 	/*----------------------------------------------------------------------- */
 	bl	sdram_init
 
-	/*
-	 * Setup temporary stack pointer only for boards
-	 * that do not use SDRAM SPD I2C stuff since it
-	 * is already initialized to use DCACHE or OCM
-	 * stacks.
-	 */
-#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
-	lis	r1, CFG_INIT_RAM_ADDR@h
-	ori	r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
-
-	li	r0, 0			/* Make room for stack frame header and */
-	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
-	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
-	/*
-	 * Set up a dummy frame to store reset vector as return address.
-	 * this causes stack underflow to reset board.
-	 */
-	stwu	r1, -8(r1)		/* Save back chain and move SP */
-	lis	r0, RESET_VECTOR@h	/* Address of reset vector */
-	ori	r0, r0, RESET_VECTOR@l
-	stwu	r1, -8(r1)		/* Save back chain and move SP */
-	stw	r0, +12(r1)		/* Save return addr (underflow vect) */
-#endif /* !(CFG_INIT_DCACHE_CS	|| !CFG_TEM_STACK_OCM) */
-
 #ifdef CONFIG_NAND_SPL
 	bl	nand_boot		/* will not return */
 #else
@@ -1211,111 +1220,6 @@ mck_return:
 #endif /* CONFIG_440 */
 
 
-/*
- * Cache functions.
- *
- * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
- * although for some cache-ralated calls stubs have to be provided to satisfy
- * symbols resolution.
- * Icache-related functions are used in POST framework.
- *
- */
-#ifdef CONFIG_440
-       .globl  dcache_disable
-       .globl  icache_disable
-       .globl  icache_enable
-dcache_disable:
-icache_disable:
-icache_enable:
-	blr
-
-	.globl	dcache_status
-	.globl	icache_status
-dcache_status:
-icache_status:
-	mr	r3,  0
-	blr
-#else
-flush_dcache:
-	addis	r9,r0,0x0002		/* set mask for EE and CE msr bits */
-	ori	r9,r9,0x8000
-	mfmsr	r12			/* save msr */
-	andc	r9,r12,r9
-	mtmsr	r9			/* disable EE and CE */
-	addi	r10,r0,0x0001		/* enable data cache for unused memory */
-	mfdccr	r9			/* region 0xF8000000-0xFFFFFFFF via */
-	or	r10,r10,r9		/* bit 31 in dccr */
-	mtdccr	r10
-
-	/* do loop for # of congruence classes. */
-	lis	r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha	/* TBS: for large cache sizes */
-	ori	r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
-	lis	r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */
-	ori	r11,r11,(CFG_DCACHE_SIZE / 2)@l /* D cache set size - 2 way sets */
-	mtctr	r10
-	addi	r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */
-	add	r11,r10,r11		/* add to get to other side of cache line */
-..flush_dcache_loop:
-	lwz	r3,0(r10)		/* least recently used side */
-	lwz	r3,0(r11)		/* the other side */
-	dccci	r0,r11			/* invalidate both sides */
-	addi	r10,r10,CFG_CACHELINE_SIZE /* bump to next line */
-	addi	r11,r11,CFG_CACHELINE_SIZE /* bump to next line */
-	bdnz	..flush_dcache_loop
-	sync				/* allow memory access to complete */
-	mtdccr	r9			/* restore dccr */
-	mtmsr	r12			/* restore msr */
-	blr
-
-	.globl	icache_enable
-icache_enable:
-	mflr	r8
-	bl	invalidate_icache
-	mtlr	r8
-	isync
-	addis	r3,r0, 0x8000	      /* set bit 0 */
-	mticcr	r3
-	blr
-
-	.globl	icache_disable
-icache_disable:
-	addis	r3,r0, 0x0000	      /* clear bit 0 */
-	mticcr	r3
-	isync
-	blr
-
-	.globl	icache_status
-icache_status:
-	mficcr	r3
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
-	blr
-
-	.globl	dcache_enable
-dcache_enable:
-	mflr	r8
-	bl	invalidate_dcache
-	mtlr	r8
-	isync
-	addis	r3,r0, 0x8000	      /* set bit 0 */
-	mtdccr	r3
-	blr
-
-	.globl	dcache_disable
-dcache_disable:
-	mflr	r8
-	bl	flush_dcache
-	mtlr	r8
-	addis	r3,r0, 0x0000	      /* clear bit 0 */
-	mtdccr	r3
-	blr
-
-	.globl	dcache_status
-dcache_status:
-	mfdccr	r3
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
-	blr
-#endif
-
 	.globl get_pvr
 get_pvr:
 	mfspr	r3, PVR
@@ -1421,6 +1325,26 @@ ppcSync:
  */
 	.globl	relocate_code
 relocate_code:
+#ifdef CONFIG_4xx_DCACHE
+	/*
+	 * We need to flush the Init Data before the dcache will be
+	 * invalidated
+	 */
+
+	/* save regs */
+	mr	r9,r3
+	mr	r10,r4
+	mr	r11,r5
+
+	mr	r3,r4
+	addi	r4,r4,0x200	/* should be enough for init data */
+	bl	flush_dcache_range
+
+	/* restore regs */
+	mr	r3,r9
+	mr	r4,r10
+	mr	r5,r11
+#endif
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE)
@@ -1432,7 +1356,11 @@ relocate_code:
 	dccci	0,0			/* Invalidate data cache, now no longer our stack */
 	sync
 	isync
-	addi	r1,r0,0x0000		/* TLB entry #0 */
+#ifdef CFG_TLB_FOR_BOOT_FLASH
+	addi	r1,r0,CFG_TLB_FOR_BOOT_FLASH	/* Use defined TLB */
+#else
+	addi	r1,r0,0x0000		/* Default TLB entry is #0 */
+#endif
 	tlbre	r0,r1,0x0002		/* Read contents */
 	ori	r0,r0,0x0c00		/* Or in the inhibit, write through bit */
 	tlbwe	r0,r1,0x0002		/* Save it out */
@@ -1448,7 +1376,7 @@ relocate_code:
 	ori	r4, r4, CFG_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, L1_CACHE_BYTES		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
@@ -1566,16 +1494,25 @@ clear_bss:
 	lwz	r4,GOT(_end)
 
 	cmplw	0, r3, r4
-	beq	6f
+	beq	7f
 
 	li	r0, 0
-5:
+
+	andi.	r5, r4, 3
+	beq	6f
+	sub	r4, r4, r5
+	mtctr	r5
+	mr	r5, r4
+5:	stb	r0, 0(r5)
+	addi	r5, r5, 1
+	bdnz	5b
+6:
 	stw	r0, 0(r3)
 	addi	r3, r3, 4
 	cmplw	0, r3, r4
-	bne	5b
-6:
+	bne	6b
 
+7:
 	mr	r3, r9		/* Init Data pointer		*/
 	mr	r4, r10		/* Destination Address		*/
 	bl	board_init_r
@@ -1768,23 +1705,6 @@ in32:
 	lwz	3,0x0000(3)
 	blr
 
-invalidate_icache:
-	iccci	r0,r0			/* for 405, iccci invalidates the */
-	blr				/*   entire I cache */
-
-invalidate_dcache:
-	addi	r6,0,0x0000		/* clear GPR 6 */
-	/* Do loop for # of dcache congruence classes. */
-	lis	r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha	/* TBS for large sized cache */
-	ori	r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
-					/* NOTE: dccci invalidates both */
-	mtctr	r7			/* ways in the D cache */
-..dcloop:
-	dccci	0,r6			/* invalidate line */
-	addi	r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
-	bdnz	..dcloop
-	blr
-
 /**************************************************************************/
 /* PPC405EP specific stuff						  */
 /**************************************************************************/
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index 098694caf..ed493f1a7 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -26,6 +26,7 @@
 #if defined(CONFIG_440)
 
 #include <ppc440.h>
+#include <asm/cache.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
 
@@ -42,7 +43,6 @@ void remove_tlb(u32 vaddr, u32 size)
 	u32 tlb_vaddr;
 	u32 tlb_size = 0;
 
-	/* First, find the index of a TLB entry not being used */
 	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
 		tlb_word0_value = mftlb1(i);
 		tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
@@ -96,6 +96,92 @@ void remove_tlb(u32 vaddr, u32 size)
 	asm("isync");
 }
 
+/*
+ * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
+ * This function is used to either turn cache on or off in a specific
+ * memory area.
+ */
+void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
+{
+	int i;
+	u32 tlb_word0_value;
+	u32 tlb_word2_value;
+	u32 tlb_vaddr;
+	u32 tlb_size = 0;
+
+	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+		tlb_word0_value = mftlb1(i);
+		tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+		if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+		    (tlb_vaddr >= vaddr)) {
+			/*
+			 * TLB is enabled and start address is lower or equal
+			 * than the area we are looking for. Now we only have
+			 * to check the size/end address for a match.
+			 */
+			switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+			case TLB_WORD0_SIZE_1KB:
+				tlb_size = 1 << 10;
+				break;
+			case TLB_WORD0_SIZE_4KB:
+				tlb_size = 4 << 10;
+				break;
+			case TLB_WORD0_SIZE_16KB:
+				tlb_size = 16 << 10;
+				break;
+			case TLB_WORD0_SIZE_64KB:
+				tlb_size = 64 << 10;
+				break;
+			case TLB_WORD0_SIZE_256KB:
+				tlb_size = 256 << 10;
+				break;
+			case TLB_WORD0_SIZE_1MB:
+				tlb_size = 1 << 20;
+				break;
+			case TLB_WORD0_SIZE_16MB:
+				tlb_size = 16 << 20;
+				break;
+			case TLB_WORD0_SIZE_256MB:
+				tlb_size = 256 << 20;
+				break;
+			}
+
+			/*
+			 * Now check the end-address if it's in the range
+			 */
+			if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) {
+				/*
+				 * Found a TLB in the range.
+				 * Change cache attribute in tlb2 word.
+				 */
+				tlb_word2_value =
+					TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+					TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+					TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+					TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+					TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+					TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+					TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+					TLB_WORD2_SR_ENABLE;
+
+				/*
+				 * Now either flush or invalidate the dcache
+				 */
+				if (tlb_word2_i_value)
+					flush_dcache();
+				else
+					invalidate_dcache();
+
+				mttlb3(i, tlb_word2_value);
+				asm("iccci 0,0");
+			}
+		}
+	}
+
+	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
+	asm("isync");
+}
+
 static int add_tlb_entry(unsigned long phys_addr,
 			 unsigned long virt_addr,
 			 unsigned long tlb_word0_size_value,
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
index 272ed8c15..cb8d5c7d3 100644
--- a/cpu/ppc4xx/usb.c
+++ b/cpu/ppc4xx/usb.c
@@ -25,25 +25,41 @@
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
 
+#ifdef CONFIG_4xx_DCACHE
+#include <asm/mmu.h>
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 #include "usbdev.h"
 
 int usb_cpu_init(void)
 {
+#ifdef CONFIG_4xx_DCACHE
+	/* disable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
 	usb_dev_init();
 #endif
-
 	return 0;
 }
 
 int usb_cpu_stop(void)
 {
+#ifdef CONFIG_4xx_DCACHE
+	/* enable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
 	return 0;
 }
 
 int usb_cpu_init_fail(void)
 {
+#ifdef CONFIG_4xx_DCACHE
+	/* enable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
 	return 0;
 }
 
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index bddf9e5da..93e51b90c 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -270,6 +270,110 @@
 #define VECNUM_EIR3		30	/* External interrupt 3		*/
 #define VECNUM_EIR4		31	/* External interrupt 4		*/
 
+#elif defined(CONFIG_405EX)
+
+/* UIC 0 */
+#define VECNUM_U0		00
+#define VECNUM_U1		01
+#define VECNUM_IIC0		02
+#define VECNUM_PKA		03
+#define VECNUM_TRNG		04
+#define VECNUM_EBM		05
+#define VECNUM_BGI		06
+#define VECNUM_IIC1		07
+#define VECNUM_SPI		08
+#define VECNUM_EIR0		09
+#define VECNUM_MTE		10	/* MAL Tx EOB */
+#define VECNUM_MRE		11	/* MAL Rx EOB */
+#define VECNUM_DMA0		12
+#define VECNUM_DMA1		13
+#define VECNUM_DMA2		14
+#define VECNUM_DMA3		15
+#define VECNUM_PCIE0AL		16
+#define VECNUM_PCIE0VPD		17
+#define VECNUM_RPCIE0HRST	18
+#define VECNUM_FPCIE0HRST	19
+#define VECNUM_PCIE0TCR		20
+#define VECNUM_PCIEMSI0		21
+#define VECNUM_PCIEMSI1		22
+#define VECNUM_SECURITY		23
+#define VECNUM_ETH0		24
+#define VECNUM_ETH1		25
+#define VECNUM_PCIEMSI2		26
+#define VECNUM_EIR4		27
+#define VECNUM_UIC2NC		28
+#define VECNUM_UIC2C		29
+#define VECNUM_UIC1NC		30
+#define VECNUM_UIC1C		31
+
+/* UIC 1 */
+#define VECNUM_MS		(32 + 00)	/* MAL SERR */
+#define VECNUM_TXDE		(32 + 01)	/* MAL TXDE */
+#define VECNUM_RXDE		(32 + 02)	/* MAL RXDE */
+#define VECNUM_PCIE0BMVC0	(32 + 03)
+#define VECNUM_PCIE0DCRERR	(32 + 04)
+#define VECNUM_EBC		(32 + 05)
+#define VECNUM_NDFC		(32 + 06)
+#define VECNUM_PCEI1DCRERR	(32 + 07)
+#define VECNUM_CT8		(32 + 08)
+#define VECNUM_CT9		(32 + 09)
+#define VECNUM_PCIE1AL		(32 + 10)
+#define VECNUM_PCIE1VPD		(32 + 11)
+#define VECNUM_RPCE1HRST	(32 + 12)
+#define VECNUM_FPCE1HRST	(32 + 13)
+#define VECNUM_PCIE1TCR		(32 + 14)
+#define VECNUM_PCIE1VC0		(32 + 15)
+#define VECNUM_CT3		(32 + 16)
+#define VECNUM_CT4		(32 + 17)
+#define VECNUM_EIR7		(32 + 18)
+#define VECNUM_EIR8		(32 + 19)
+#define VECNUM_EIR9		(32 + 20)
+#define VECNUM_CT5		(32 + 21)
+#define VECNUM_CT6		(32 + 22)
+#define VECNUM_CT7		(32 + 23)
+#define VECNUM_SROM		(32 + 24)	/* SERIAL ROM */
+#define VECNUM_GPTDECPULS	(32 + 25)	/* GPT Decrement pulse */
+#define VECNUM_EIR2		(32 + 26)
+#define VECNUM_EIR5		(32 + 27)
+#define VECNUM_EIR6		(32 + 28)
+#define VECNUM_EMAC0WAKE	(32 + 29)
+#define VECNUM_EIR1		(32 + 30)
+#define VECNUM_EMAC1WAKE	(32 + 31)
+
+/* UIC 2 */
+#define VECNUM_PCIE0INTA	(64 + 00)	/* PCIE0 INTA */
+#define VECNUM_PCIE0INTB	(64 + 01)	/* PCIE0 INTB */
+#define VECNUM_PCIE0INTC	(64 + 02)	/* PCIE0 INTC */
+#define VECNUM_PCIE0INTD	(64 + 03)	/* PCIE0 INTD */
+#define VECNUM_EIR3		(64 + 04)	/* External IRQ 3 */
+#define VECNUM_DDRMCUE		(64 + 05)
+#define VECNUM_DDRMCCE		(64 + 06)
+#define VECNUM_MALINTCOATX0	(64 + 07)	/* Interrupt coalecence TX0 */
+#define VECNUM_MALINTCOATX1	(64 + 08)	/* Interrupt coalecence TX1 */
+#define VECNUM_MALINTCOARX0	(64 + 09)	/* Interrupt coalecence RX0 */
+#define VECNUM_MALINTCOARX1	(64 + 10)	/* Interrupt coalecence RX1 */
+#define VECNUM_PCIE1INTA	(64 + 11)	/* PCIE0 INTA */
+#define VECNUM_PCIE1INTB	(64 + 12)	/* PCIE0 INTB */
+#define VECNUM_PCIE1INTC	(64 + 13)	/* PCIE0 INTC */
+#define VECNUM_PCIE1INTD	(64 + 14)	/* PCIE0 INTD */
+#define VECNUM_RPCIEMSI2	(64 + 15)	/* MSI level 2 */
+#define VECNUM_PCIEMSI3		(64 + 16)	/* MSI level 2 */
+#define VECNUM_PCIEMSI4		(64 + 17)	/* MSI level 2 */
+#define VECNUM_PCIEMSI5		(64 + 18)	/* MSI level 2 */
+#define VECNUM_PCIEMSI6		(64 + 19)	/* MSI level 2 */
+#define VECNUM_PCIEMSI7		(64 + 20)	/* MSI level 2 */
+#define VECNUM_PCIEMSI8		(64 + 21)	/* MSI level 2 */
+#define VECNUM_PCIEMSI9		(64 + 22)	/* MSI level 2 */
+#define VECNUM_PCIEMSI10	(64 + 23)	/* MSI level 2 */
+#define VECNUM_PCIEMSI11	(64 + 24)	/* MSI level 2 */
+#define VECNUM_PCIEMSI12	(64 + 25)	/* MSI level 2 */
+#define VECNUM_PCIEMSI13	(64 + 26)	/* MSI level 2 */
+#define VECNUM_PCIEMSI14	(64 + 27)	/* MSI level 2 */
+#define VECNUM_PCIEMSI15	(64 + 28)	/* MSI level 2 */
+#define VECNUM_PLB4XAHB		(64 + 29)	/* PLBxAHB bridge */
+#define VECNUM_USBWAKE		(64 + 30)	/* USB wakup */
+#define VECNUM_USBOTG		(64 + 31)	/* USB OTG */
+
 #else	/* !CONFIG_405EZ */
 
 #define VECNUM_U0           0           /* UART0                        */
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
index 722d94947..92dd19f95 100644
--- a/cpu/pxa/i2c.c
+++ b/cpu/pxa/i2c.c
@@ -457,7 +457,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 uchar i2c_reg_read (uchar chip, uchar reg)
 {
-	char buf;
+	uchar buf;
 
 	PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
 	i2c_read(chip, reg, 1, &buf, 1);
diff --git a/cpu/sh4/Makefile b/cpu/sh4/Makefile
new file mode 100644
index 000000000..1bb8bd772
--- /dev/null
+++ b/cpu/sh4/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).a
+
+START	= start.o
+OBJS	= cpu.o interrupts.o watchdog.o time.o cache.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/sh4/cache.c b/cpu/sh4/cache.c
new file mode 100644
index 000000000..4e744d714
--- /dev/null
+++ b/cpu/sh4/cache.c
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+/*
+ * Jump to P2 area.
+ * When handling TLB or caches, we need to do it from P2 area.
+ */
+#define jump_to_P2()			\
+  do {					\
+    unsigned long __dummy;		\
+    __asm__ __volatile__(		\
+		"mov.l	1f, %0\n\t"	\
+		"or	%1, %0\n\t"	\
+		"jmp	@%0\n\t"	\
+		" nop\n\t"		\
+		".balign 4\n"		\
+		"1:	.long 2f\n"	\
+		"2:"			\
+		: "=&r" (__dummy)	\
+		: "r" (0x20000000));	\
+  } while (0)
+
+/*
+ * Back to P1 area.
+ */
+#define back_to_P1()					\
+  do {							\
+    unsigned long __dummy;				\
+    __asm__ __volatile__(				\
+		"nop;nop;nop;nop;nop;nop;nop\n\t"	\
+		"mov.l	1f, %0\n\t"			\
+		"jmp	@%0\n\t"			\
+		" nop\n\t"				\
+		".balign 4\n"				\
+		"1:	.long 2f\n"			\
+		"2:"					\
+		: "=&r" (__dummy));			\
+  } while (0)
+
+#define CACHE_VALID       1
+#define CACHE_UPDATED     2
+
+static inline void cache_wback_all(void)
+{
+	unsigned long addr, data, i, j;
+
+	jump_to_P2();
+	for (i = 0; i < CACHE_OC_NUM_ENTRIES; i++){
+		for (j = 0; j < CACHE_OC_NUM_WAYS; j++) {
+      			addr = CACHE_OC_ADDRESS_ARRAY | (j << CACHE_OC_WAY_SHIFT)
+				| (i << CACHE_OC_ENTRY_SHIFT);
+      			data = inl(addr);
+			if (data & CACHE_UPDATED) {
+				data &= ~CACHE_UPDATED;
+				outl(data, addr);
+			}
+		}
+	}
+	back_to_P1();
+}
+
+
+#define CACHE_ENABLE      0
+#define CACHE_DISABLE     1
+
+int cache_control(unsigned int cmd)
+{
+	unsigned long ccr;
+
+	jump_to_P2();
+	ccr = inl(CCR);
+
+	if (ccr & CCR_CACHE_ENABLE)
+		cache_wback_all();
+
+	if (cmd == CACHE_DISABLE)
+		outl(CCR_CACHE_STOP, CCR);
+	else
+		outl(CCR_CACHE_INIT, CCR);
+	back_to_P1();
+
+	return 0;
+}
diff --git a/cpu/sh4/config.mk b/cpu/sh4/config.mk
new file mode 100644
index 000000000..b3feb2a51
--- /dev/null
+++ b/cpu/sh4/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+PLATFORM_CPPFLAGS += -m4-nofpu
+PLATFORM_RELFLAGS += -ffixed-r13
diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c
new file mode 100644
index 000000000..0ebf95180
--- /dev/null
+++ b/cpu/sh4/cpu.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+
+int checkcpu(void)
+{
+	puts("CPU: SH4\n");
+	return 0;
+}
+
+int cpu_init (void)
+{
+	return 0;
+}
+
+int cleanup_before_linux (void)
+{
+	disable_interrupts();
+	return 0;
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	disable_interrupts();
+	reset_cpu (0);
+	return 0;
+}
+
+void flush_cache (unsigned long addr, unsigned long size)
+{
+
+}
+
+void icache_enable (void)
+{
+	cache_control(0);
+}
+
+void icache_disable (void)
+{
+	cache_control(1);
+}
+
+int icache_status (void)
+{
+	return 0;
+}
+
+void dcache_enable (void)
+{
+}
+
+void dcache_disable (void)
+{
+}
+
+int dcache_status (void)
+{
+	return 0;
+}
diff --git a/cpu/sh4/interrupts.c b/cpu/sh4/interrupts.c
new file mode 100644
index 000000000..6988ecc7c
--- /dev/null
+++ b/cpu/sh4/interrupts.c
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int interrupt_init (void)
+{
+	return 0;
+}
+
+void enable_interrupts (void)
+{
+
+}
+
+int disable_interrupts (void){
+	return 0;
+}
diff --git a/cpu/sh4/start.S b/cpu/sh4/start.S
new file mode 100644
index 000000000..a68ebb8c9
--- /dev/null
+++ b/cpu/sh4/start.S
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+	.text
+	.align	2
+
+	.global	_start
+_start:
+	mov.l	._lowlevel_init, r0
+100:	bsrf	r0
+	nop
+
+	bsr	1f
+	nop
+1:	sts	pr, r5
+	mov.l	._reloc_dst, r4
+	add	#(_start-1b), r5
+	mov.l	._reloc_dst_end, r6
+
+2:	mov.l	@r5+, r1
+	mov.l	r1, @r4
+	add	#4, r4
+	cmp/hs	r6, r4
+	bf	2b
+
+	mov.l	._bss_start, r4
+	mov.l	._bss_end, r5
+	mov	#0, r1
+
+3:	mov.l	r1, @r4			/* bss clear */
+	add	#4, r4
+	cmp/hs	r5, r4
+	bf	3b
+
+	mov.l	._gd_init, r13		/* global data */
+	mov.l	._stack_init, r15	/* stack */
+
+	mov.l	._sh_generic_init, r0
+	jsr	@r0
+	nop
+
+loop:
+	bra	loop
+
+	.align	2
+
+._lowlevel_init:	.long	(lowlevel_init - (100b + 4))
+._reloc_dst:		.long	reloc_dst
+._reloc_dst_end:	.long	reloc_dst_end
+._bss_start:		.long	bss_start
+._bss_end:		.long	bss_end
+._gd_init:		.long	(_start - CFG_GBL_DATA_SIZE)
+._stack_init:		.long	(_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16)
+._sh_generic_init:	.long	sh_generic_init
diff --git a/cpu/sh4/time.c b/cpu/sh4/time.c
new file mode 100644
index 000000000..5f8a3a080
--- /dev/null
+++ b/cpu/sh4/time.c
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2007
+ * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#define TMU_MAX_COUNTER (~0UL)
+
+static void tmu_timer_start (unsigned int timer)
+{
+	if (timer > 2)
+		return;
+
+	*((volatile unsigned char *) TSTR) |= (1 << timer);
+}
+
+static void tmu_timer_stop (unsigned int timer)
+{
+	u8 val = *((volatile u8 *)TSTR);
+	if (timer > 2)
+		return;
+	*((volatile unsigned char *)TSTR) = val &~(1 << timer);
+}
+
+int timer_init (void)
+{
+	/* Divide clock by 4 */
+	*(volatile u16 *)TCR0 = 0;
+
+	tmu_timer_stop(0);
+	tmu_timer_start(0);
+	return 0;
+}
+
+/*
+   In theory we should return a true 64bit value (ie something that doesn't
+   overflow). However, we don't. Therefore if TMU runs at fastest rate of
+   6.75 MHz this value will wrap after u-boot has been running for approx
+   10 minutes.
+*/
+unsigned long long get_ticks (void)
+{
+	return (0 - *((volatile u32 *) TCNT0));
+}
+
+unsigned long get_timer (unsigned long base)
+{
+	return ((0 - *((volatile u32 *) TCNT0)) - base);
+}
+
+void set_timer (unsigned long t)
+{
+	*((volatile unsigned int *) TCNT0) = (0 - t);
+}
+
+void reset_timer (void)
+{
+	tmu_timer_stop(0);
+	set_timer (0);
+	tmu_timer_start(0);
+}
+
+void udelay (unsigned long usec)
+{
+	unsigned int start = get_timer (0);
+	unsigned int end = start + (usec * ((CFG_HZ + 500000) / 1000000));
+
+	while (get_timer (0) < end)
+		continue;
+}
+
+unsigned long get_tbclk (void)
+{
+	return CFG_HZ;
+}
diff --git a/cpu/sh4/watchdog.c b/cpu/sh4/watchdog.c
new file mode 100644
index 000000000..346e21714
--- /dev/null
+++ b/cpu/sh4/watchdog.c
@@ -0,0 +1,50 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#define WDT_BASE	WTCNT
+
+static unsigned char cnt_read (void){
+	return *((volatile unsigned char *)(WDT_BASE + 0x00));
+}
+
+static unsigned char csr_read (void){
+	return *((volatile unsigned char *)(WDT_BASE + 0x04));
+}
+
+static void cnt_write (unsigned char value){
+	while (csr_read() & (1 << 5)) {
+		/* delay */
+	}
+	*((volatile unsigned short *)(WDT_BASE + 0x00))
+		= ((unsigned short) value) | 0x5A00;
+}
+
+static void csr_write (unsigned char value){
+	*((volatile unsigned short *)(WDT_BASE + 0x04))
+		= ((unsigned short) value) | 0xA500;
+}
+
+
+int watchdog_init (void){ return 0; }
+
+void reset_cpu (unsigned long ignored)
+{
+	while(1);
+}
diff --git a/disk/Makefile b/disk/Makefile
index 1a929ce6d..f19d18d89 100644
--- a/disk/Makefile
+++ b/disk/Makefile
@@ -27,8 +27,13 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)libdisk.a
 
-COBJS	= part.o part_mac.o part_dos.o part_iso.o part_amiga.o
+COBJS-y += part.o
+COBJS-y += part_mac.o
+COBJS-y += part_dos.o
+COBJS-y += part_iso.o
+COBJS-y += part_amiga.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
new file mode 100644
index 000000000..3ed5cd33c
--- /dev/null
+++ b/doc/README.marubun-pcmcia
@@ -0,0 +1,65 @@
+
+U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
+	Last update 21/11/2007 by Nobuhiro Iwamatsu
+
+========================================================================================
+
+0. What's this?
+    This driver supports MARUBUN MR-SHPC-01.
+	url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
+	(Sorry Japanese only.)
+
+    This chip is used with SuperH well, and adopted by the
+    reference board.
+	ex. * MS7750SE01
+		* MS7722SE01
+		* other
+
+    This chip doesn't support CardBus.
+
+1. base source code
+    The code is based on sources from the Linux kernel
+    	( arch/sh/kernel/cf-enabler.c ).
+
+2. How to use
+    The options you have to specify in the config file are (with the
+    value for my board as an example):
+
+    * CONFIG_MARUBUN_PCCARD
+	If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
+	ex. 	#define CONFIG_MARUBUN_PCCARD
+
+    * CONFIG_PCMCIA_SLOT_A
+    	Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
+	ex.	#define CONFIG_PCMCIA_SLOT_A    1
+
+    * CFG_MARUBUN_MRSHPC
+    	This is MR-SHPC-01 PCMCIA controler base address.
+	You should do the setting matched to your environment.
+	ex.  #define CFG_MARUBUN_MRSHPC 0xb03fffe0
+	     ( for MS7722SE01 environment )
+
+    * CFG_MARUBUN_MW1
+	This is MR-SHPC-01 memory window base address.
+	You should do the setting matched to your environment.
+	ex. #define CFG_MARUBUN_MW1 0xb0400000
+	     ( for MS7722SE01 environment )
+
+    * CFG_MARUBUN_MW1
+	This is MR-SHPC-01 attribute window base address.
+	You should do the setting matched to your environment.
+	ex. #define CFG_MARUBUN_MW2 0xb0500000
+	     ( for MS7722SE01 environment )
+
+    * CFG_MARUBUN_MW1
+	This is MR-SHPC-01 I/O window base address.
+	You should do the setting matched to your environment.
+	ex. #define CFG_MARUBUN_IO  0xb0600000
+	     ( for MS7722SE01 environment )
+
+3. Other
+    * Check Compact Flash only.
+    * Maybe, NE2000 compatible NIC is sure to move.
+
+Copyright (c) 2007
+	Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
diff --git a/doc/README.mpc8610hpcd b/doc/README.mpc8610hpcd
new file mode 100644
index 000000000..949dcb265
--- /dev/null
+++ b/doc/README.mpc8610hpcd
@@ -0,0 +1,67 @@
+Freescale MPC8610HPCD board
+===========================
+
+
+Building U-Boot
+---------------
+
+    $ make MPC8610HPCD_config
+    Configuring for MPC8610HPCD board...
+
+    $ make
+
+
+Flashing U-Boot
+---------------
+The flash is 128M starting at 0xF800_0000.
+
+The alternate image is at 0xFBF0_0000
+The      boot image is at 0xFFF0_0000.
+
+
+To Flash U-Boot into the booting bank:
+
+	tftp 1000000 u-boot.bin
+	protect off all
+	erase fff00000 +$filesize
+	cp.b 1000000 fff00000 $filesize
+
+
+To Flash U-boot into the alternate bank
+
+	tftp 1000000 u-boot.bin
+	erase fbf00000 +$filesize
+	cp.b 1000000 fbf00000 $filesize
+
+
+pixis_reset command
+-------------------
+A new command, "pixis_reset", is introduced to reset mpc8610hpcd board
+using the FPGA sequencer.  When the board restarts, it has the option
+of using either the current or alternate flash bank as the boot
+image, with or without the watchdog timer enabled, and finally with
+or without frequency changes.
+
+Usage is;
+
+	pixis_reset
+	pixis_reset altbank
+	pixis_reset altbank wd
+	pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+	pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+
+Examples;
+
+	/* reset to current bank, like "reset" command */
+	pixis_reset
+
+	/* reset board but use the to alternate flash bank */
+	pixis_reset altbank
+
+	/* reset board, use alternate flash bank with watchdog timer enabled*/
+	pixis_reset altbank wd
+
+	/* reset board to alternate bank with frequency changed.
+	 * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
+	 */
+	pixis-reset altbank cf 40 2.5 10
diff --git a/doc/README.sh b/doc/README.sh
new file mode 100644
index 000000000..075d360e9
--- /dev/null
+++ b/doc/README.sh
@@ -0,0 +1,61 @@
+
+U-Boot for Renesas SuperH
+	Last update 08/10/2007 by Nobuhiro Iwamatsu
+
+================================================================================
+0. What's this?
+	This file contains status information for the port of U-Boot to the
+	Renesas SuperH series of CPUs.
+
+================================================================================
+1. Overview
+	SuperH has an original boot loader. However, source code is dirty, and
+	maintenance is not done.
+	To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
+	started the porting to u-boot in 2007.
+
+================================================================================
+2. Supported CPUs
+
+	2.1. Renesas SH7750/SH7750R
+	2.2. Renesas SH7722
+
+================================================================================
+3. Supported Boards
+
+	3.1. Hitachi UL MS7750SE01/MS7750RSE01
+		Board specific code is in board/ms7750se
+		To use this board, type "make ms7750se_config".
+
+	3.2. Hitachi UL MS7722SE01
+		Board specific code is in board/ms7722se
+		To use this board, type "make ms7722se_config".
+
+	** README **
+		In SuperH, S-record and binary of made u-boot work on the memory.
+		When u-boot is written in the flash, it is necessary to change the
+		address by using 'objcopy'.
+		ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
+
+================================================================================
+4. Compiler
+	You can use the following of u-boot to compile.
+		- SuperH Linux Open site
+			http://www.superh-linux.org/
+		- KPIT GNU tools
+			http://www.kpitgnutools.com/
+
+================================================================================
+5. Future
+	I plan to support the following CPUs and boards.
+		5.1. CPUs
+			- SH7710/SH7712 (SH3)
+			- SH7780(SH4)
+			- SH7785(SH4)
+
+		5.2. Boards
+			- Many boards ;-)
+
+================================================================================
+Copyright (c) 2007
+    Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
diff --git a/drivers/Makefile b/drivers/Makefile
deleted file mode 100755
index d19588f3a..000000000
--- a/drivers/Makefile
+++ /dev/null
@@ -1,73 +0,0 @@
-#
-# (C) Copyright 2000-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-# CFLAGS += -DET_DEBUG -DDEBUG
-
-LIB	= $(obj)libdrivers.a
-
-COBJS	= 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o \
-	  ati_radeon_fb.o atmel_usart.o \
-	  bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
-	  cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
-	  ds1722.o e1000.o eepro100.o enc28j60.o \
-	  fsl_i2c.o fsl_pci_init.o \
-	  i8042.o inca-ip_sw.o isp116x-hcd.o \
-	  keyboard.o ks8695eth.o \
-	  lan91c96.o macb.o mpc8xx_pcmcia.o mw_eeprom.o \
-	  natsemi.o ne2000.o netarm_eth.o netconsole.o \
-	  ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
-	  omap24xx_i2c.o pc_keyb.o \
-	  pci.o pci_auto.o pci_indirect.o \
-	  pcnet.o plb2800_eth.o ps2ser.o ps2mult.o pxa_pcmcia.o \
-	  rpx_pcmcia.o rtl8019.o rtl8139.o rtl8169.o \
-	  s3c4510b_eth.o s3c4510b_uart.o \
-	  sed13806.o sed156x.o \
-	  serial.o serial_max3100.o \
-	  serial_xuartlite.o \
-	  sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
-	  status_led.o sym53c8xx.o systemace.o ahci.o \
-	  ti_pci1410a.o tigon3.o tqm8xx_pcmcia.o tsec.o \
-	  tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
-	  usb_ohci.o \
-	  usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \
-	  usbtty.o \
-	  videomodes.o w83c553f.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-all:	$(LIB)
-
-$(LIB): $(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c
index 8f1d8b29d..cb1b0c1b9 100644
--- a/drivers/bios_emulator/besys.c
+++ b/drivers/bios_emulator/besys.c
@@ -96,7 +96,7 @@ static u8 *BE_memaddr(u32 addr)
 	else if (addr >= 0xFFFF5 && addr < 0xFFFFE) {
 		/* Return a faked BIOS date string for non-x86 machines */
 		DB(printf("BE_memaddr - Returning BIOS date\n");)
-		return BE_biosDate + addr - 0xFFFF5;
+		return (u8 *)(BE_biosDate + addr - 0xFFFF5);
 	} else if (addr == 0xFFFFE) {
 		/* Return system model identifier for non-x86 machines */
 		DB(printf("BE_memaddr - Returning model\n");)
diff --git a/drivers/bios_emulator/biosemu.c b/drivers/bios_emulator/biosemu.c
index ccfc872f7..75ceb458c 100644
--- a/drivers/bios_emulator/biosemu.c
+++ b/drivers/bios_emulator/biosemu.c
@@ -96,7 +96,7 @@ int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, int shared)
 		return 0;
 	}
 
-	M.mem_base = (unsigned long)malloc(memSize);
+	M.mem_base = malloc(memSize);
 
 	if (M.mem_base == NULL){
 		printf("Biosemu:Out of memory!");
@@ -106,7 +106,7 @@ int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, int shared)
 
 	_BE_env.emulateVGA = 0;
 	_BE_env.busmem_base = (unsigned long)malloc(128 * 1024);
-	if (_BE_env.busmem_base == NULL){
+	if ((void *)_BE_env.busmem_base == NULL){
 		printf("Biosemu:Out of memory!");
 		return 0;
 	}
@@ -230,7 +230,7 @@ Cleans up and exits the emulator.
 void X86API BE_exit(void)
 {
 	free(M.mem_base);
-	free(_BE_env.busmem_base);
+	free((void *)_BE_env.busmem_base);
 }
 
 /****************************************************************************
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
new file mode 100644
index 000000000..e069969e6
--- /dev/null
+++ b/drivers/block/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libblock.a
+
+COBJS-y += ahci.o
+COBJS-y += ata_piix.o
+COBJS-y += sil680.o
+COBJS-y += sym53c8xx.o
+COBJS-y += systemace.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/ahci.c b/drivers/block/ahci.c
index 3d82c625a..3d82c625a 100644
--- a/drivers/ahci.c
+++ b/drivers/block/ahci.c
diff --git a/drivers/ata_piix.c b/drivers/block/ata_piix.c
index 42456d7be..42456d7be 100644
--- a/drivers/ata_piix.c
+++ b/drivers/block/ata_piix.c
diff --git a/drivers/sil680.c b/drivers/block/sil680.c
index a6143df4c..a6143df4c 100644
--- a/drivers/sil680.c
+++ b/drivers/block/sil680.c
diff --git a/drivers/sym53c8xx.c b/drivers/block/sym53c8xx.c
index 29eeccd9a..29eeccd9a 100644
--- a/drivers/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
diff --git a/drivers/systemace.c b/drivers/block/systemace.c
index 7d82c27c6..7d82c27c6 100644
--- a/drivers/systemace.c
+++ b/drivers/block/systemace.c
diff --git a/dtt/Makefile b/drivers/hwmon/Makefile
index c6a670af1..32e3f44a9 100644
--- a/dtt/Makefile
+++ b/drivers/hwmon/Makefile
@@ -28,10 +28,17 @@ include $(TOPDIR)/config.mk
 
 #CFLAGS += -DDEBUG
 
-LIB	= $(obj)libdtt.a
+LIB	= $(obj)libhwmon.a
 
-COBJS	= lm75.o ds1621.o adm1021.o lm81.o ds1775.o
+COBJS-y += adm1021.o
+COBJS-y += ds1621.o
+COBJS-y += ds1722.o
+COBJS-y += ds1775.o
+COBJS-y += lm73.o
+COBJS-y += lm75.o
+COBJS-y += lm81.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/dtt/adm1021.c b/drivers/hwmon/adm1021.c
index 9f65cfb27..9f65cfb27 100644
--- a/dtt/adm1021.c
+++ b/drivers/hwmon/adm1021.c
diff --git a/dtt/ds1621.c b/drivers/hwmon/ds1621.c
index 494818131..494818131 100644
--- a/dtt/ds1621.c
+++ b/drivers/hwmon/ds1621.c
diff --git a/drivers/ds1722.c b/drivers/hwmon/ds1722.c
index c19ee0139..c19ee0139 100644
--- a/drivers/ds1722.c
+++ b/drivers/hwmon/ds1722.c
diff --git a/dtt/ds1775.c b/drivers/hwmon/ds1775.c
index e44cee327..0fbb0b42a 100644
--- a/dtt/ds1775.c
+++ b/drivers/hwmon/ds1775.c
@@ -25,7 +25,7 @@
 #include <i2c.h>
 #include <dtt.h>
 
-#define DTT_I2C_DEV_CODE 0x49		/* Dallas Semi's DS1775 device code */
+#define DTT_I2C_DEV_CODE	CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
 
 int dtt_read(int sensor, int reg)
 {
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
new file mode 100644
index 000000000..f9ae01297
--- /dev/null
+++ b/drivers/hwmon/lm73.c
@@ -0,0 +1,181 @@
+/*
+ * (C) Copyright 2007
+ * Larry Johnson, lrj@acm.org
+ *
+ * based on dtt/lm75.c which is ...
+ *
+ * (C) Copyright 2001
+ * Bill Hunter,  Wave 7 Optics, williamhunter@mediaone.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * National Semiconductor LM73 Temperature Sensor
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DTT_LM73
+#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
+	(CFG_EEPROM_PAGE_WRITE_BITS < 1)
+# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM73"
+#endif
+
+#include <i2c.h>
+#include <dtt.h>
+
+/*
+ * Device code
+ */
+#define DTT_I2C_DEV_CODE 0x48	/* National Semi's LM73 device */
+
+int dtt_read(int sensor, int reg)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Validate 'reg' param and get register size.
+	 */
+	switch (reg) {
+	case DTT_CONFIG:
+	case DTT_CONTROL:
+		dlen = 1;
+		break;
+	case DTT_READ_TEMP:
+	case DTT_TEMP_HIGH:
+	case DTT_TEMP_LOW:
+	case DTT_ID:
+		dlen = 2;
+		break;
+	default:
+		return -1;
+	}
+	/*
+	 * Calculate sensor address and register.
+	 */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);	/* calculate LM73 addr */
+	/*
+	 * Now try to read the register.
+	 */
+	if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+		return -1;
+	/*
+	 * Handle 2 byte result.
+	 */
+	if (2 == dlen)
+		return ((int)((short)data[1] + (((short)data[0]) << 8)));
+
+	return (int)data[0];
+} /* dtt_read() */
+
+int dtt_write(int sensor, int reg, int val)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Validate 'reg' param and handle register size
+	 */
+	switch (reg) {
+	case DTT_CONFIG:
+	case DTT_CONTROL:
+		dlen = 1;
+		data[0] = (char)(val & 0xff);
+		break;
+	case DTT_TEMP_HIGH:
+	case DTT_TEMP_LOW:
+		dlen = 2;
+		data[0] = (char)((val >> 8) & 0xff);	/* MSB first */
+		data[1] = (char)(val & 0xff);
+		break;
+	default:
+		return -1;
+	}
+	/*
+	 * Calculate sensor address and register.
+	 */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);	/* calculate LM73 addr */
+	/*
+	 * Write value to register.
+	 */
+	return i2c_write(sensor, reg, 1, data, dlen) != 0;
+} /* dtt_write() */
+
+static int _dtt_init(int sensor)
+{
+	int val;
+
+	/*
+	 * Validate the Identification register
+	 */
+	if (0x0190 != dtt_read(sensor, DTT_ID))
+		return 1;
+	/*
+	 * Setup THIGH (upper-limit) and TLOW (lower-limit) registers
+	 */
+	val = CFG_DTT_MAX_TEMP << 7;
+	if (dtt_write(sensor, DTT_TEMP_HIGH, val))
+		return 1;
+
+	val = CFG_DTT_MIN_TEMP << 7;
+	if (dtt_write(sensor, DTT_TEMP_LOW, val))
+		return 1;
+	/*
+	 * Setup configuraton register
+	 */
+	/* config = alert active low, disabled, and reset */
+	val = 0x64;
+	if (dtt_write(sensor, DTT_CONFIG, val))
+		return 1;
+	/*
+	 * Setup control/status register
+	 */
+	/* control = temp resolution 0.25C */
+	val = 0x00;
+	if (dtt_write(sensor, DTT_CONTROL, val))
+		return 1;
+
+	dtt_read(sensor, DTT_CONTROL);	/* clear temperature flags */
+	return 0;
+} /* _dtt_init() */
+
+int dtt_init(void)
+{
+	int i;
+	unsigned char sensors[] = CONFIG_DTT_SENSORS;
+	const char *const header = "DTT:   ";
+
+	for (i = 0; i < sizeof(sensors); i++) {
+		if (_dtt_init(sensors[i]) != 0)
+			printf("%s%d FAILED INIT\n", header, i + 1);
+		else
+			printf("%s%d is %i C\n", header, i + 1,
+			       dtt_get_temp(sensors[i]));
+	}
+	return 0;
+} /* dtt_init() */
+
+int dtt_get_temp(int sensor)
+{
+	return (dtt_read(sensor, DTT_READ_TEMP) + 0x0040) >> 7;
+} /* dtt_get_temp() */
+
+#endif /* CONFIG_DTT_LM73 */
diff --git a/dtt/lm75.c b/drivers/hwmon/lm75.c
index 63f3b7551..63f3b7551 100644
--- a/dtt/lm75.c
+++ b/drivers/hwmon/lm75.c
diff --git a/dtt/lm81.c b/drivers/hwmon/lm81.c
index 03bc53d58..03bc53d58 100644
--- a/dtt/lm81.c
+++ b/drivers/hwmon/lm81.c
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
new file mode 100644
index 000000000..29d6c03db
--- /dev/null
+++ b/drivers/i2c/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libi2c.a
+
+COBJS-y += fsl_i2c.o
+COBJS-y += omap1510_i2c.o
+COBJS-y += omap24xx_i2c.o
+COBJS-y += tsi108_i2c.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 22485ea91..22485ea91 100644
--- a/drivers/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
diff --git a/drivers/omap1510_i2c.c b/drivers/i2c/omap1510_i2c.c
index 04400fbcd..04400fbcd 100644
--- a/drivers/omap1510_i2c.c
+++ b/drivers/i2c/omap1510_i2c.c
diff --git a/drivers/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 7dab78685..7dab78685 100644
--- a/drivers/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
diff --git a/drivers/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index 3a3b75c39..d6736b047 100644
--- a/drivers/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -276,7 +276,7 @@ int i2c_probe (uchar chip)
 	 * The Tsi108 HW doesn't support sending just the chip address
 	 * and checkong for an <ACK> back.
 	 */
-	return i2c_read (chip, 0, 1, (char *)&tmp, 1);
+	return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
 }
 
 #endif
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
new file mode 100644
index 000000000..df22cf9c6
--- /dev/null
+++ b/drivers/input/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libinput.a
+
+COBJS-y += i8042.o
+COBJS-y += keyboard.o
+COBJS-y += pc_keyb.o ps2ser.o ps2mult.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/i8042.c b/drivers/input/i8042.c
index 22c2a4e3a..22c2a4e3a 100644
--- a/drivers/i8042.c
+++ b/drivers/input/i8042.c
diff --git a/drivers/keyboard.c b/drivers/input/keyboard.c
index 9975202d7..9975202d7 100644
--- a/drivers/keyboard.c
+++ b/drivers/input/keyboard.c
diff --git a/drivers/pc_keyb.c b/drivers/input/pc_keyb.c
index 81d3e9893..81d3e9893 100644
--- a/drivers/pc_keyb.c
+++ b/drivers/input/pc_keyb.c
diff --git a/drivers/ps2mult.c b/drivers/input/ps2mult.c
index 9515a0fbf..9515a0fbf 100644
--- a/drivers/ps2mult.c
+++ b/drivers/input/ps2mult.c
diff --git a/drivers/ps2ser.c b/drivers/input/ps2ser.c
index 4e304f740..4e304f740 100644
--- a/drivers/ps2ser.c
+++ b/drivers/input/ps2ser.c
diff --git a/drivers/nand/Makefile b/drivers/misc/Makefile
index fb0185b99..78cec21fb 100644
--- a/drivers/nand/Makefile
+++ b/drivers/misc/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2006
+# (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -23,10 +23,13 @@
 
 include $(TOPDIR)/config.mk
 
-LIB 	:= $(obj)libnand.a
+LIB 	:= $(obj)libmisc.a
 
-COBJS 	:= nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o nand_util.o
+COBJS-y += ali512x.o
+COBJS-y += ns87308.o
+COBJS-y += status_led.o
 
+COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
 OBJS 	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/ali512x.c b/drivers/misc/ali512x.c
index 7b7edc09a..7b7edc09a 100644
--- a/drivers/ali512x.c
+++ b/drivers/misc/ali512x.c
diff --git a/drivers/ns87308.c b/drivers/misc/ns87308.c
index cf4d3595e..cf4d3595e 100644
--- a/drivers/ns87308.c
+++ b/drivers/misc/ns87308.c
diff --git a/drivers/status_led.c b/drivers/misc/status_led.c
index ddb6c22e8..ddb6c22e8 100644
--- a/drivers/status_led.c
+++ b/drivers/misc/status_led.c
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
new file mode 100644
index 000000000..952e91984
--- /dev/null
+++ b/drivers/mtd/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libmtd.a
+
+COBJS-y += at45.o
+COBJS-y += cfi_flash.o
+COBJS-y += dataflash.o
+COBJS-y += mw_eeprom.o
+COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/at45.c b/drivers/mtd/at45.c
index dac987a43..dac987a43 100644
--- a/drivers/at45.c
+++ b/drivers/mtd/at45.c
diff --git a/drivers/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 5579a1efc..4f61e365e 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -42,9 +42,12 @@
 #ifdef	CFG_FLASH_CFI_DRIVER
 
 /*
- * This file implements a Common Flash Interface (CFI) driver for U-Boot.
- * The width of the port and the width of the chips are determined at initialization.
- * These widths are used to calculate the address for access CFI data structures.
+ * This file implements a Common Flash Interface (CFI) driver for
+ * U-Boot.
+ *
+ * The width of the port and the width of the chips are determined at
+ * initialization.  These widths are used to calculate the address for
+ * access CFI data structures.
  *
  * References
  * JEDEC Standard JESD68 - Common Flash Interface (CFI)
@@ -55,7 +58,7 @@
  * AMD/Spansion Application Note: Migration from Single-byte to Three-byte
  *   Device IDs, Publication Number 25538 Revision A, November 8, 2001
  *
- * define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
+ * Define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
  * reading and writing ... (yes there is such a Hardware).
  */
 
@@ -98,10 +101,6 @@
 #define AMD_STATUS_TOGGLE		0x40
 #define AMD_STATUS_ERROR		0x20
 
-#define AMD_ADDR_ERASE_START	((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
-#define AMD_ADDR_START		((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
-#define AMD_ADDR_ACK		((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA)
-
 #define FLASH_OFFSET_MANUFACTURER_ID	0x00
 #define FLASH_OFFSET_DEVICE_ID		0x01
 #define FLASH_OFFSET_DEVICE_ID2		0x0E
@@ -110,7 +109,8 @@
 #define FLASH_OFFSET_CFI_ALT		0x555
 #define FLASH_OFFSET_CFI_RESP		0x10
 #define FLASH_OFFSET_PRIMARY_VENDOR	0x13
-#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR	0x15	/* extended query table primary addr */
+/* extended query table primary address */
+#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR	0x15
 #define FLASH_OFFSET_WTOUT		0x1F
 #define FLASH_OFFSET_WBTOUT		0x20
 #define FLASH_OFFSET_ETOUT		0x21
@@ -149,16 +149,9 @@ typedef union {
 	unsigned long long ll;
 } cfiword_t;
 
-typedef union {
-	volatile unsigned char *cp;
-	volatile unsigned short *wp;
-	volatile unsigned long *lp;
-	volatile unsigned long long *llp;
-} cfiptr_t;
-
 #define NUM_ERASE_REGIONS	4 /* max. number of erase regions */
 
-static uint flash_offset_cfi[2]={FLASH_OFFSET_CFI,FLASH_OFFSET_CFI_ALT};
+static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
 
 /* use CFG_MAX_FLASH_BANKS_DETECT if defined */
 #ifdef CFG_MAX_FLASH_BANKS_DETECT
@@ -176,46 +169,151 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];		/* FLASH chips info */
 #define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #endif
 
+typedef unsigned long flash_sect_t;
+
+/* CFI standard query structure */
+struct cfi_qry {
+	u8	qry[3];
+	u16	p_id;
+	u16	p_adr;
+	u16	a_id;
+	u16	a_adr;
+	u8	vcc_min;
+	u8	vcc_max;
+	u8	vpp_min;
+	u8	vpp_max;
+	u8	word_write_timeout_typ;
+	u8	buf_write_timeout_typ;
+	u8	block_erase_timeout_typ;
+	u8	chip_erase_timeout_typ;
+	u8	word_write_timeout_max;
+	u8	buf_write_timeout_max;
+	u8	block_erase_timeout_max;
+	u8	chip_erase_timeout_max;
+	u8	dev_size;
+	u16	interface_desc;
+	u16	max_buf_write_size;
+	u8	num_erase_regions;
+	u32	erase_region_info[NUM_ERASE_REGIONS];
+} __attribute__((packed));
+
+struct cfi_pri_hdr {
+	u8	pri[3];
+	u8	major_version;
+	u8	minor_version;
+} __attribute__((packed));
+
+static void flash_write8(u8 value, void *addr)
+{
+	__raw_writeb(value, addr);
+}
+
+static void flash_write16(u16 value, void *addr)
+{
+	__raw_writew(value, addr);
+}
+
+static void flash_write32(u32 value, void *addr)
+{
+	__raw_writel(value, addr);
+}
+
+static void flash_write64(u64 value, void *addr)
+{
+	/* No architectures currently implement __raw_writeq() */
+	*(volatile u64 *)addr = value;
+}
+
+static u8 flash_read8(void *addr)
+{
+	return __raw_readb(addr);
+}
+
+static u16 flash_read16(void *addr)
+{
+	return __raw_readw(addr);
+}
+
+static u32 flash_read32(void *addr)
+{
+	return __raw_readl(addr);
+}
+
+static u64 flash_read64(void *addr)
+{
+	/* No architectures currently implement __raw_readq() */
+	return *(volatile u64 *)addr;
+}
 
 /*-----------------------------------------------------------------------
- * Functions
  */
+#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+static flash_info_t *flash_get_info(ulong base)
+{
+	int i;
+	flash_info_t * info = 0;
 
-typedef unsigned long flash_sect_t;
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		info = & flash_info[i];
+		if (info->size && info->start[0] <= base &&
+		    base <= info->start[0] + info->size - 1)
+			break;
+	}
 
-static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c);
-static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf);
-static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect);
-static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static void flash_read_jedec_ids (flash_info_t * info);
-static int flash_detect_cfi (flash_info_t * info);
-static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword);
-static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
-				    ulong tout, char *prompt);
-ulong flash_get_size (ulong base, int banknum);
-#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-static flash_info_t *flash_get_info(ulong base);
-#endif
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, int len);
+	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
 #endif
 
+unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect)
+{
+	if (sect != (info->sector_count - 1))
+		return info->start[sect + 1] - info->start[sect];
+	else
+		return info->start[0] + info->size - info->start[sect];
+}
+
 /*-----------------------------------------------------------------------
  * create an address based on the offset and the port width
  */
-inline uchar *flash_make_addr (flash_info_t * info, flash_sect_t sect, uint offset)
+static inline void *
+flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
+{
+	unsigned int byte_offset = offset * info->portwidth;
+
+	return map_physmem(info->start[sect] + byte_offset,
+			flash_sector_size(info, sect) - byte_offset,
+			MAP_NOCACHE);
+}
+
+static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
+		unsigned int offset, void *addr)
 {
-	return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
+	unsigned int byte_offset = offset * info->portwidth;
+
+	unmap_physmem(addr, flash_sector_size(info, sect) - byte_offset);
+}
+
+/*-----------------------------------------------------------------------
+ * make a proper sized command based on the port and chip widths
+ */
+static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
+{
+	int i;
+	uchar *cp = (uchar *) cmdbuf;
+
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+	for (i = info->portwidth; i > 0; i--)
+#else
+	for (i = 1; i <= info->portwidth; i++)
+#endif
+		*cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd;
 }
 
 #ifdef DEBUG
 /*-----------------------------------------------------------------------
  * Debug support
  */
-void print_longlong (char *str, unsigned long long data)
+static void print_longlong (char *str, unsigned long long data)
 {
 	int i;
 	char *cp;
@@ -224,28 +322,25 @@ void print_longlong (char *str, unsigned long long data)
 	for (i = 0; i < 8; i++)
 		sprintf (&str[i * 2], "%2.2x", *cp++);
 }
-static void flash_printqry (flash_info_t * info, flash_sect_t sect)
+
+static void flash_printqry (struct cfi_qry *qry)
 {
-	cfiptr_t cptr;
+	u8 *p = (u8 *)qry;
 	int x, y;
 
-	for (x = 0; x < 0x40; x += 16U / info->portwidth) {
-		cptr.cp =
-			flash_make_addr (info, sect,
-					 x + FLASH_OFFSET_CFI_RESP);
-		debug ("%p : ", cptr.cp);
-		for (y = 0; y < 16; y++) {
-			debug ("%2.2x ", cptr.cp[y]);
-		}
-		debug (" ");
+	for (x = 0; x < sizeof(struct cfi_qry); x += 16) {
+		debug("%02x : ", x);
+		for (y = 0; y < 16; y++)
+			debug("%2.2x ", p[x + y]);
+		debug(" ");
 		for (y = 0; y < 16; y++) {
-			if (cptr.cp[y] >= 0x20 && cptr.cp[y] <= 0x7e) {
-				debug ("%c", cptr.cp[y]);
-			} else {
-				debug (".");
-			}
+			unsigned char c = p[x + y];
+			if (c >= 0x20 && c <= 0x7e)
+				debug("%c", c);
+			else
+				debug(".");
 		}
-		debug ("\n");
+		debug("\n");
 	}
 }
 #endif
@@ -254,192 +349,658 @@ static void flash_printqry (flash_info_t * info, flash_sect_t sect)
 /*-----------------------------------------------------------------------
  * read a character at a port width address
  */
-inline uchar flash_read_uchar (flash_info_t * info, uint offset)
+static inline uchar flash_read_uchar (flash_info_t * info, uint offset)
 {
 	uchar *cp;
+	uchar retval;
 
-	cp = flash_make_addr (info, 0, offset);
+	cp = flash_map (info, 0, offset);
 #if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
-	return (cp[0]);
+	retval = flash_read8(cp);
 #else
-	return (cp[info->portwidth - 1]);
+	retval = flash_read8(cp + info->portwidth - 1);
 #endif
+	flash_unmap (info, 0, offset, cp);
+	return retval;
 }
 
 /*-----------------------------------------------------------------------
- * read a short word by swapping for ppc format.
+ * read a long word by picking the least significant byte of each maximum
+ * port size word. Swap for ppc format.
  */
-ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset)
+static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
+			      uint offset)
 {
 	uchar *addr;
-	ushort retval;
+	ulong retval;
 
 #ifdef DEBUG
 	int x;
 #endif
-	addr = flash_make_addr (info, sect, offset);
+	addr = flash_map (info, sect, offset);
 
 #ifdef DEBUG
-	debug ("ushort addr is at %p info->portwidth = %d\n", addr,
+	debug ("long addr is at %p info->portwidth = %d\n", addr,
 	       info->portwidth);
-	for (x = 0; x < 2 * info->portwidth; x++) {
-		debug ("addr[%x] = 0x%x\n", x, addr[x]);
+	for (x = 0; x < 4 * info->portwidth; x++) {
+		debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x));
 	}
 #endif
 #if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
-	retval = ((addr[(info->portwidth)] << 8) | addr[0]);
+	retval = ((flash_read8(addr) << 16) |
+		  (flash_read8(addr + info->portwidth) << 24) |
+		  (flash_read8(addr + 2 * info->portwidth)) |
+		  (flash_read8(addr + 3 * info->portwidth) << 8));
 #else
-	retval = ((addr[(2 * info->portwidth) - 1] << 8) |
-		  addr[info->portwidth - 1]);
+	retval = ((flash_read8(addr + 2 * info->portwidth - 1) << 24) |
+		  (flash_read8(addr + info->portwidth - 1) << 16) |
+		  (flash_read8(addr + 4 * info->portwidth - 1) << 8) |
+		  (flash_read8(addr + 3 * info->portwidth - 1)));
 #endif
+	flash_unmap(info, sect, offset, addr);
 
-	debug ("retval = 0x%x\n", retval);
 	return retval;
 }
 
-/*-----------------------------------------------------------------------
- * read a long word by picking the least significant byte of each maximum
- * port size word. Swap for ppc format.
+/*
+ * Write a proper sized command to the correct address
  */
-ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
+static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
+			     uint offset, uchar cmd)
 {
-	uchar *addr;
-	ulong retval;
 
+	void *addr;
+	cfiword_t cword;
+
+	addr = flash_map (info, sect, offset);
+	flash_make_cmd (info, cmd, &cword);
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr, cmd,
+		       cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		flash_write8(cword.c, addr);
+		break;
+	case FLASH_CFI_16BIT:
+		debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr,
+		       cmd, cword.w,
+		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		flash_write16(cword.w, addr);
+		break;
+	case FLASH_CFI_32BIT:
+		debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr,
+		       cmd, cword.l,
+		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		flash_write32(cword.l, addr);
+		break;
+	case FLASH_CFI_64BIT:
 #ifdef DEBUG
-	int x;
+		{
+			char str[20];
+
+			print_longlong (str, cword.ll);
+
+			debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
+			       addr, cmd, str,
+			       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		}
 #endif
-	addr = flash_make_addr (info, sect, offset);
+		flash_write64(cword.ll, addr);
+		break;
+	}
 
+	/* Ensure all the instructions are fully finished */
+	sync();
+
+	flash_unmap(info, sect, offset, addr);
+}
+
+static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
+{
+	flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_UNLOCK_START);
+	flash_write_cmd (info, sect, info->addr_unlock2, AMD_CMD_UNLOCK_ACK);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_isequal (flash_info_t * info, flash_sect_t sect,
+			  uint offset, uchar cmd)
+{
+	void *addr;
+	cfiword_t cword;
+	int retval;
+
+	addr = flash_map (info, sect, offset);
+	flash_make_cmd (info, cmd, &cword);
+
+	debug ("is= cmd %x(%c) addr %p ", cmd, cmd, addr);
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		debug ("is= %x %x\n", flash_read8(addr), cword.c);
+		retval = (flash_read8(addr) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		debug ("is= %4.4x %4.4x\n", flash_read16(addr), cword.w);
+		retval = (flash_read16(addr) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		debug ("is= %8.8lx %8.8lx\n", flash_read32(addr), cword.l);
+		retval = (flash_read32(addr) == cword.l);
+		break;
+	case FLASH_CFI_64BIT:
 #ifdef DEBUG
-	debug ("long addr is at %p info->portwidth = %d\n", addr,
-	       info->portwidth);
-	for (x = 0; x < 4 * info->portwidth; x++) {
-		debug ("addr[%x] = 0x%x\n", x, addr[x]);
-	}
-#endif
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
-	retval = (addr[0] << 16) | (addr[(info->portwidth)] << 24) |
-		(addr[(2 * info->portwidth)]) | (addr[(3 * info->portwidth)] << 8);
-#else
-	retval = (addr[(2 * info->portwidth) - 1] << 24) |
-		(addr[(info->portwidth) - 1] << 16) |
-		(addr[(4 * info->portwidth) - 1] << 8) |
-		addr[(3 * info->portwidth) - 1];
+		{
+			char str1[20];
+			char str2[20];
+
+			print_longlong (str1, flash_read64(addr));
+			print_longlong (str2, cword.ll);
+			debug ("is= %s %s\n", str1, str2);
+		}
 #endif
+		retval = (flash_read64(addr) == cword.ll);
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	flash_unmap(info, sect, offset, addr);
+
 	return retval;
 }
 
+/*-----------------------------------------------------------------------
+ */
+static int flash_isset (flash_info_t * info, flash_sect_t sect,
+			uint offset, uchar cmd)
+{
+	void *addr;
+	cfiword_t cword;
+	int retval;
+
+	addr = flash_map (info, sect, offset);
+	flash_make_cmd (info, cmd, &cword);
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = ((flash_read8(addr) & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		retval = ((flash_read16(addr) & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		retval = ((flash_read32(addr) & cword.l) == cword.l);
+		break;
+	case FLASH_CFI_64BIT:
+		retval = ((flash_read64(addr) & cword.ll) == cword.ll);
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	flash_unmap(info, sect, offset, addr);
+
+	return retval;
+}
 
 /*-----------------------------------------------------------------------
  */
-unsigned long flash_init (void)
+static int flash_toggle (flash_info_t * info, flash_sect_t sect,
+			 uint offset, uchar cmd)
 {
-	unsigned long size = 0;
-	int i;
+	void *addr;
+	cfiword_t cword;
+	int retval;
 
-#ifdef CFG_FLASH_PROTECTION
-	char *s = getenv("unlock");
+	addr = flash_map (info, sect, offset);
+	flash_make_cmd (info, cmd, &cword);
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = ((flash_read8(addr) & cword.c) !=
+			  (flash_read8(addr) & cword.c));
+		break;
+	case FLASH_CFI_16BIT:
+		retval = ((flash_read16(addr) & cword.w) !=
+			  (flash_read16(addr) & cword.w));
+		break;
+	case FLASH_CFI_32BIT:
+		retval = ((flash_read32(addr) & cword.l) !=
+			  (flash_read32(addr) & cword.l));
+		break;
+	case FLASH_CFI_64BIT:
+		retval = ((flash_read64(addr) & cword.ll) !=
+			  (flash_read64(addr) & cword.ll));
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	flash_unmap(info, sect, offset, addr);
+
+	return retval;
+}
+
+/*
+ * flash_is_busy - check to see if the flash is busy
+ *
+ * This routine checks the status of the chip and returns true if the
+ * chip is busy.
+ */
+static int flash_is_busy (flash_info_t * info, flash_sect_t sect)
+{
+	int retval;
+
+	switch (info->vendor) {
+	case CFI_CMDSET_INTEL_STANDARD:
+	case CFI_CMDSET_INTEL_EXTENDED:
+		retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
+		break;
+	case CFI_CMDSET_AMD_STANDARD:
+	case CFI_CMDSET_AMD_EXTENDED:
+#ifdef CONFIG_FLASH_CFI_LEGACY
+	case CFI_CMDSET_AMD_LEGACY:
 #endif
+		retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE);
+		break;
+	default:
+		retval = 0;
+	}
+	debug ("flash_is_busy: %d\n", retval);
+	return retval;
+}
 
-	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		size += flash_info[i].size = flash_get_size (bank_base[i], i);
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-#ifndef CFG_FLASH_QUIET_TEST
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-				i+1, flash_info[i].size, flash_info[i].size << 20);
-#endif /* CFG_FLASH_QUIET_TEST */
-		}
-#ifdef CFG_FLASH_PROTECTION
-		else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
-			/*
-			 * Only the U-Boot image and it's environment is protected,
-			 * all other sectors are unprotected (unlocked) if flash
-			 * hardware protection is used (CFG_FLASH_PROTECTION) and
-			 * the environment variable "unlock" is set to "yes".
-			 */
-			if (flash_info[i].legacy_unlock) {
-				int k;
+/*-----------------------------------------------------------------------
+ *  wait for XSR.7 to be set. Time out with an error if it does not.
+ *  This routine does not set the flash to read-array mode.
+ */
+static int flash_status_check (flash_info_t * info, flash_sect_t sector,
+			       ulong tout, char *prompt)
+{
+	ulong start;
 
-				/*
-				 * Disable legacy_unlock temporarily, since
-				 * flash_real_protect would relock all other sectors
-				 * again otherwise.
-				 */
-				flash_info[i].legacy_unlock = 0;
+#if CFG_HZ != 1000
+	tout *= CFG_HZ/1000;
+#endif
 
-				/*
-				 * Legacy unlocking (e.g. Intel J3) -> unlock only one
-				 * sector. This will unlock all sectors.
-				 */
-				flash_real_protect (&flash_info[i], 0, 0);
+	/* Wait for command completion */
+	start = get_timer (0);
+	while (flash_is_busy (info, sector)) {
+		if (get_timer (start) > tout) {
+			printf ("Flash %s timeout at address %lx data %lx\n",
+				prompt, info->start[sector],
+				flash_read_long (info, sector, 0));
+			flash_write_cmd (info, sector, 0, info->cmd_reset);
+			return ERR_TIMOUT;
+		}
+		udelay (1);		/* also triggers watchdog */
+	}
+	return ERR_OK;
+}
 
-				flash_info[i].legacy_unlock = 1;
+/*-----------------------------------------------------------------------
+ * Wait for XSR.7 to be set, if it times out print an error, otherwise
+ * do a full status check.
+ *
+ * This routine sets the flash to read-array mode.
+ */
+static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
+				    ulong tout, char *prompt)
+{
+	int retcode;
 
-				/*
-				 * Manually mark other sectors as unlocked (unprotected)
-				 */
-				for (k = 1; k < flash_info[i].sector_count; k++)
-					flash_info[i].protect[k] = 0;
-			} else {
-				/*
-				 * No legancy unlocking -> unlock all sectors
-				 */
-				flash_protect (FLAG_PROTECT_CLEAR,
-					       flash_info[i].start[0],
-					       flash_info[i].start[0] + flash_info[i].size - 1,
-					       &flash_info[i]);
+	retcode = flash_status_check (info, sector, tout, prompt);
+	switch (info->vendor) {
+	case CFI_CMDSET_INTEL_EXTENDED:
+	case CFI_CMDSET_INTEL_STANDARD:
+		if ((retcode == ERR_OK)
+		    && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
+			retcode = ERR_INVAL;
+			printf ("Flash %s error at address %lx\n", prompt,
+				info->start[sector]);
+			if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS |
+					 FLASH_STATUS_PSLBS)) {
+				puts ("Command Sequence Error.\n");
+			} else if (flash_isset (info, sector, 0,
+						FLASH_STATUS_ECLBS)) {
+				puts ("Block Erase Error.\n");
+				retcode = ERR_NOT_ERASED;
+			} else if (flash_isset (info, sector, 0,
+						FLASH_STATUS_PSLBS)) {
+				puts ("Locking Error\n");
 			}
+			if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
+				puts ("Block locked.\n");
+				retcode = ERR_PROTECTED;
+			}
+			if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
+				puts ("Vpp Low Error.\n");
 		}
-#endif /* CFG_FLASH_PROTECTION */
+		flash_write_cmd (info, sector, 0, info->cmd_reset);
+		break;
+	default:
+		break;
 	}
+	return retcode;
+}
 
-	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len  - 1,
-		       flash_get_info(CFG_MONITOR_BASE));
+/*-----------------------------------------------------------------------
+ */
+static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
+{
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+	unsigned short	w;
+	unsigned int	l;
+	unsigned long long ll;
 #endif
 
-	/* Environment protection ON by default */
-#ifdef CFG_ENV_IS_IN_FLASH
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-		       flash_get_info(CFG_ENV_ADDR));
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cword->c = c;
+		break;
+	case FLASH_CFI_16BIT:
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+		w = c;
+		w <<= 8;
+		cword->w = (cword->w >> 8) | w;
+#else
+		cword->w = (cword->w << 8) | c;
 #endif
-
-	/* Redundant environment protection ON by default */
-#ifdef CFG_ENV_ADDR_REDUND
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR_REDUND,
-		       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-		       flash_get_info(CFG_ENV_ADDR_REDUND));
+		break;
+	case FLASH_CFI_32BIT:
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+		l = c;
+		l <<= 24;
+		cword->l = (cword->l >> 8) | l;
+#else
+		cword->l = (cword->l << 8) | c;
 #endif
-	return (size);
+		break;
+	case FLASH_CFI_64BIT:
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+		ll = c;
+		ll <<= 56;
+		cword->ll = (cword->ll >> 8) | ll;
+#else
+		cword->ll = (cword->ll << 8) | c;
+#endif
+		break;
+	}
+}
+
+/* loop through the sectors from the highest address when the passed
+ * address is greater or equal to the sector address we have a match
+ */
+static flash_sect_t find_sector (flash_info_t * info, ulong addr)
+{
+	flash_sect_t sector;
+
+	for (sector = info->sector_count - 1; sector >= 0; sector--) {
+		if (addr >= info->start[sector])
+			break;
+	}
+	return sector;
 }
 
 /*-----------------------------------------------------------------------
  */
-#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-static flash_info_t *flash_get_info(ulong base)
+static int flash_write_cfiword (flash_info_t * info, ulong dest,
+				cfiword_t cword)
 {
-	int i;
-	flash_info_t * info = 0;
+	void *dstaddr;
+	int flag;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->size && info->start[0] <= base &&
-		    base <= info->start[0] + info->size - 1)
+	dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
+
+	/* Check if Flash is (sufficiently) erased */
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		flag = ((flash_read8(dstaddr) & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		flag = ((flash_read16(dstaddr) & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		flag = ((flash_read32(dstaddr) & cword.l) == cword.l);
+		break;
+	case FLASH_CFI_64BIT:
+		flag = ((flash_read64(dstaddr) & cword.ll) == cword.ll);
+		break;
+	default:
+		flag = 0;
+		break;
+	}
+	if (!flag) {
+		unmap_physmem(dstaddr, info->portwidth);
+		return ERR_NOT_ERASED;
+	}
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	switch (info->vendor) {
+	case CFI_CMDSET_INTEL_EXTENDED:
+	case CFI_CMDSET_INTEL_STANDARD:
+		flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+		flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
+		break;
+	case CFI_CMDSET_AMD_EXTENDED:
+	case CFI_CMDSET_AMD_STANDARD:
+#ifdef CONFIG_FLASH_CFI_LEGACY
+	case CFI_CMDSET_AMD_LEGACY:
+#endif
+		flash_unlock_seq (info, 0);
+		flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE);
+		break;
+	}
+
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		flash_write8(cword.c, dstaddr);
+		break;
+	case FLASH_CFI_16BIT:
+		flash_write16(cword.w, dstaddr);
+		break;
+	case FLASH_CFI_32BIT:
+		flash_write32(cword.l, dstaddr);
+		break;
+	case FLASH_CFI_64BIT:
+		flash_write64(cword.ll, dstaddr);
+		break;
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	unmap_physmem(dstaddr, info->portwidth);
+
+	return flash_full_status_check (info, find_sector (info, dest),
+					info->write_tout, "write");
+}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+
+static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
+				  int len)
+{
+	flash_sect_t sector;
+	int cnt;
+	int retcode;
+	void *src = cp;
+	void *dst = map_physmem(dest, len, MAP_NOCACHE);
+	void *dst2 = dst;
+	int flag = 0;
+
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cnt = len;
+		break;
+	case FLASH_CFI_16BIT:
+		cnt = len >> 1;
+		break;
+	case FLASH_CFI_32BIT:
+		cnt = len >> 2;
+		break;
+	case FLASH_CFI_64BIT:
+		cnt = len >> 3;
+		break;
+	default:
+		retcode = ERR_INVAL;
+		goto out_unmap;
+	}
+
+	while ((cnt-- > 0) && (flag == 0)) {
+		switch (info->portwidth) {
+		case FLASH_CFI_8BIT:
+			flag = ((flash_read8(dst2) & flash_read8(src)) ==
+				flash_read8(src));
+			src += 1, dst2 += 1;
 			break;
+		case FLASH_CFI_16BIT:
+			flag = ((flash_read16(dst2) & flash_read16(src)) ==
+				flash_read16(src));
+			src += 2, dst2 += 2;
+			break;
+		case FLASH_CFI_32BIT:
+			flag = ((flash_read32(dst2) & flash_read32(src)) ==
+				flash_read32(src));
+			src += 4, dst2 += 4;
+			break;
+		case FLASH_CFI_64BIT:
+			flag = ((flash_read64(dst2) & flash_read64(src)) ==
+				flash_read64(src));
+			src += 8, dst2 += 8;
+			break;
+		}
+	}
+	if (!flag) {
+		retcode = ERR_NOT_ERASED;
+		goto out_unmap;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	src = cp;
+	sector = find_sector (info, dest);
+
+	switch (info->vendor) {
+	case CFI_CMDSET_INTEL_STANDARD:
+	case CFI_CMDSET_INTEL_EXTENDED:
+		flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+		flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+		retcode = flash_status_check (info, sector,
+					      info->buffer_write_tout,
+					      "write to buffer");
+		if (retcode == ERR_OK) {
+			/* reduce the number of loops by the width of
+			 * the port */
+			switch (info->portwidth) {
+			case FLASH_CFI_8BIT:
+				cnt = len;
+				break;
+			case FLASH_CFI_16BIT:
+				cnt = len >> 1;
+				break;
+			case FLASH_CFI_32BIT:
+				cnt = len >> 2;
+				break;
+			case FLASH_CFI_64BIT:
+				cnt = len >> 3;
+				break;
+			default:
+				retcode = ERR_INVAL;
+				goto out_unmap;
+			}
+			flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+			while (cnt-- > 0) {
+				switch (info->portwidth) {
+				case FLASH_CFI_8BIT:
+					flash_write8(flash_read8(src), dst);
+					src += 1, dst += 1;
+					break;
+				case FLASH_CFI_16BIT:
+					flash_write16(flash_read16(src), dst);
+					src += 2, dst += 2;
+					break;
+				case FLASH_CFI_32BIT:
+					flash_write32(flash_read32(src), dst);
+					src += 4, dst += 4;
+					break;
+				case FLASH_CFI_64BIT:
+					flash_write64(flash_read64(src), dst);
+					src += 8, dst += 8;
+					break;
+				default:
+					retcode = ERR_INVAL;
+					goto out_unmap;
+				}
+			}
+			flash_write_cmd (info, sector, 0,
+					 FLASH_CMD_WRITE_BUFFER_CONFIRM);
+			retcode = flash_full_status_check (
+				info, sector, info->buffer_write_tout,
+				"buffer write");
+		}
+
+		break;
+
+	case CFI_CMDSET_AMD_STANDARD:
+	case CFI_CMDSET_AMD_EXTENDED:
+		flash_unlock_seq(info,0);
+		flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_TO_BUFFER);
+
+		switch (info->portwidth) {
+		case FLASH_CFI_8BIT:
+			cnt = len;
+			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
+			while (cnt-- > 0) {
+				flash_write8(flash_read8(src), dst);
+				src += 1, dst += 1;
+			}
+			break;
+		case FLASH_CFI_16BIT:
+			cnt = len >> 1;
+			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
+			while (cnt-- > 0) {
+				flash_write16(flash_read16(src), dst);
+				src += 2, dst += 2;
+			}
+			break;
+		case FLASH_CFI_32BIT:
+			cnt = len >> 2;
+			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
+			while (cnt-- > 0) {
+				flash_write32(flash_read32(src), dst);
+				src += 4, dst += 4;
+			}
+			break;
+		case FLASH_CFI_64BIT:
+			cnt = len >> 3;
+			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
+			while (cnt-- > 0) {
+				flash_write64(flash_read64(src), dst);
+				src += 8, dst += 8;
+			}
+			break;
+		default:
+			retcode = ERR_INVAL;
+			goto out_unmap;
+		}
+
+		flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
+		retcode = flash_full_status_check (info, sector,
+						   info->buffer_write_tout,
+						   "buffer write");
+		break;
+
+	default:
+		debug ("Unknown Command Set\n");
+		retcode = ERR_INVAL;
+		break;
+	}
+
+out_unmap:
+	unmap_physmem(dst, len);
+	return retcode;
 }
-#endif
+#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+
 
 /*-----------------------------------------------------------------------
  */
@@ -465,7 +1026,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		}
 	}
 	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
 	} else {
 		putc ('\n');
 	}
@@ -476,18 +1038,33 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			switch (info->vendor) {
 			case CFI_CMDSET_INTEL_STANDARD:
 			case CFI_CMDSET_INTEL_EXTENDED:
-				flash_write_cmd (info, sect, 0, FLASH_CMD_CLEAR_STATUS);
-				flash_write_cmd (info, sect, 0, FLASH_CMD_BLOCK_ERASE);
-				flash_write_cmd (info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
+				flash_write_cmd (info, sect, 0,
+						 FLASH_CMD_CLEAR_STATUS);
+				flash_write_cmd (info, sect, 0,
+						 FLASH_CMD_BLOCK_ERASE);
+				flash_write_cmd (info, sect, 0,
+						 FLASH_CMD_ERASE_CONFIRM);
 				break;
 			case CFI_CMDSET_AMD_STANDARD:
 			case CFI_CMDSET_AMD_EXTENDED:
 				flash_unlock_seq (info, sect);
-				flash_write_cmd (info, sect, AMD_ADDR_ERASE_START,
-							AMD_CMD_ERASE_START);
+				flash_write_cmd (info, sect,
+						info->addr_unlock1,
+						AMD_CMD_ERASE_START);
 				flash_unlock_seq (info, sect);
-				flash_write_cmd (info, sect, 0, AMD_CMD_ERASE_SECTOR);
+				flash_write_cmd (info, sect, 0,
+						 AMD_CMD_ERASE_SECTOR);
+				break;
+#ifdef CONFIG_FLASH_CFI_LEGACY
+			case CFI_CMDSET_AMD_LEGACY:
+				flash_unlock_seq (info, 0);
+				flash_write_cmd (info, 0, info->addr_unlock1,
+						AMD_CMD_ERASE_START);
+				flash_unlock_seq (info, 0);
+				flash_write_cmd (info, sect, 0,
+						AMD_CMD_ERASE_SECTOR);
 				break;
+#endif
 			default:
 				debug ("Unkown flash vendor %d\n",
 				       info->vendor);
@@ -516,10 +1093,15 @@ void flash_print_info (flash_info_t * info)
 		return;
 	}
 
-	printf ("CFI conformant FLASH (%d x %d)",
+	printf ("%s FLASH (%d x %d)",
+		info->name,
 		(info->portwidth << 3), (info->chipwidth << 3));
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
+	if (info->size < 1024*1024)
+		printf ("  Size: %ld kB in %d Sectors\n",
+			info->size >> 10, info->sector_count);
+	else
+		printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
 	printf ("  ");
 	switch (info->vendor) {
 		case CFI_CMDSET_INTEL_STANDARD:
@@ -534,6 +1116,11 @@ void flash_print_info (flash_info_t * info)
 		case CFI_CMDSET_AMD_EXTENDED:
 			printf ("AMD Extended");
 			break;
+#ifdef CONFIG_FLASH_CFI_LEGACY
+		case CFI_CMDSET_AMD_LEGACY:
+			printf ("AMD Legacy");
+			break;
+#endif
 		default:
 			printf ("Unknown (%d)", info->vendor);
 			break;
@@ -547,7 +1134,8 @@ void flash_print_info (flash_info_t * info)
 		info->erase_blk_tout,
 		info->write_tout);
 	if (info->buffer_size > 1) {
-		printf ("  Buffer write timeout: %ld ms, buffer size: %d bytes\n",
+		printf ("  Buffer write timeout: %ld ms, "
+			"buffer size: %d bytes\n",
 		info->buffer_write_tout,
 		info->buffer_size);
 	}
@@ -565,10 +1153,7 @@ void flash_print_info (flash_info_t * info)
 		/*
 		 * Check if whole sector is erased
 		 */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
+		size = flash_sector_size(info, i);
 		erased = 1;
 		flash = (volatile unsigned long *) info->start[i];
 		size = size >> 2;	/* divide by 4 for longword access */
@@ -603,7 +1188,7 @@ void flash_print_info (flash_info_t * info)
 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 	ulong wp;
-	ulong cp;
+	uchar *p;
 	int aln;
 	cfiword_t cword;
 	int i, rc;
@@ -612,26 +1197,28 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	int buffered_size;
 #endif
 	/* get lower aligned address */
-	/* get lower aligned address */
 	wp = (addr & ~(info->portwidth - 1));
 
 	/* handle unaligned start */
 	if ((aln = addr - wp) != 0) {
 		cword.l = 0;
-		cp = wp;
-		for (i = 0; i < aln; ++i, ++cp)
-			flash_add_byte (info, &cword, (*(uchar *) cp));
+		p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+		for (i = 0; i < aln; ++i)
+			flash_add_byte (info, &cword, flash_read8(p + i));
 
 		for (; (i < info->portwidth) && (cnt > 0); i++) {
 			flash_add_byte (info, &cword, *src++);
 			cnt--;
-			cp++;
 		}
-		for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
-			flash_add_byte (info, &cword, (*(uchar *) cp));
-		if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
+		for (; (cnt == 0) && (i < info->portwidth); ++i)
+			flash_add_byte (info, &cword, flash_read8(p + i));
+
+		rc = flash_write_cfiword (info, wp, cword);
+		unmap_physmem(p, info->portwidth);
+		if (rc != 0)
 			return rc;
-		wp = cp;
+
+		wp += i;
 	}
 
 	/* handle the aligned part */
@@ -682,13 +1269,14 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	 * handle unaligned tail bytes
 	 */
 	cword.l = 0;
-	for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
+	p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+	for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) {
 		flash_add_byte (info, &cword, *src++);
 		--cnt;
 	}
-	for (; i < info->portwidth; ++i, ++cp) {
-		flash_add_byte (info, &cword, (*(uchar *) cp));
-	}
+	for (; i < info->portwidth; ++i)
+		flash_add_byte (info, &cword, flash_read8(p + i));
+	unmap_physmem(p, info->portwidth);
 
 	return flash_write_cfiword (info, wp, cword);
 }
@@ -740,10 +1328,11 @@ void flash_read_user_serial (flash_info_t * info, void *buffer, int offset,
 	uchar *dst;
 
 	dst = buffer;
-	src = flash_make_addr (info, 0, FLASH_OFFSET_USER_PROTECTION);
+	src = flash_map (info, 0, FLASH_OFFSET_USER_PROTECTION);
 	flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
 	memcpy (dst, src + offset, len);
 	flash_write_cmd (info, 0, 0, info->cmd_reset);
+	flash_unmap(info, 0, FLASH_OFFSET_USER_PROTECTION, src);
 }
 
 /*
@@ -754,418 +1343,310 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
 {
 	uchar *src;
 
-	src = flash_make_addr (info, 0, FLASH_OFFSET_INTEL_PROTECTION);
+	src = flash_map (info, 0, FLASH_OFFSET_INTEL_PROTECTION);
 	flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
 	memcpy (buffer, src + offset, len);
 	flash_write_cmd (info, 0, 0, info->cmd_reset);
+	flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src);
 }
 
 #endif /* CFG_FLASH_PROTECTION */
 
-/*
- * flash_is_busy - check to see if the flash is busy
- * This routine checks the status of the chip and returns true if the chip is busy
+/*-----------------------------------------------------------------------
+ * Reverse the order of the erase regions in the CFI QRY structure.
+ * This is needed for chips that are either a) correctly detected as
+ * top-boot, or b) buggy.
  */
-static int flash_is_busy (flash_info_t * info, flash_sect_t sect)
+static void cfi_reverse_geometry(struct cfi_qry *qry)
 {
-	int retval;
+	unsigned int i, j;
+	u32 tmp;
 
-	switch (info->vendor) {
-	case CFI_CMDSET_INTEL_STANDARD:
-	case CFI_CMDSET_INTEL_EXTENDED:
-		retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
-		break;
-	case CFI_CMDSET_AMD_STANDARD:
-	case CFI_CMDSET_AMD_EXTENDED:
-		retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE);
-		break;
-	default:
-		retval = 0;
+	for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
+		tmp = qry->erase_region_info[i];
+		qry->erase_region_info[i] = qry->erase_region_info[j];
+		qry->erase_region_info[j] = tmp;
 	}
-	debug ("flash_is_busy: %d\n", retval);
-	return retval;
 }
 
 /*-----------------------------------------------------------------------
- *  wait for XSR.7 to be set. Time out with an error if it does not.
- *  This routine does not set the flash to read-array mode.
+ * read jedec ids from device and set corresponding fields in info struct
+ *
+ * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
+ *
  */
-static int flash_status_check (flash_info_t * info, flash_sect_t sector,
-			       ulong tout, char *prompt)
+static void cmdset_intel_read_jedec_ids(flash_info_t *info)
 {
-	ulong start;
-
-#if CFG_HZ != 1000
-	tout *= CFG_HZ/1000;
-#endif
-
-	/* Wait for command completion */
-	start = get_timer (0);
-	while (flash_is_busy (info, sector)) {
-		if (get_timer (start) > tout) {
-			printf ("Flash %s timeout at address %lx data %lx\n",
-				prompt, info->start[sector],
-				flash_read_long (info, sector, 0));
-			flash_write_cmd (info, sector, 0, info->cmd_reset);
-			return ERR_TIMOUT;
-		}
-		udelay (1);		/* also triggers watchdog */
-	}
-	return ERR_OK;
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
+	udelay(1000); /* some flash are slow to respond */
+	info->manufacturer_id = flash_read_uchar (info,
+					FLASH_OFFSET_MANUFACTURER_ID);
+	info->device_id = flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
 }
 
-/*-----------------------------------------------------------------------
- * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
- * This routine sets the flash to read-array mode.
- */
-static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
-				    ulong tout, char *prompt)
+static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
 {
-	int retcode;
+	info->cmd_reset = FLASH_CMD_RESET;
 
-	retcode = flash_status_check (info, sector, tout, prompt);
-	switch (info->vendor) {
-	case CFI_CMDSET_INTEL_EXTENDED:
-	case CFI_CMDSET_INTEL_STANDARD:
-		if ((retcode == ERR_OK)
-		    && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
-			retcode = ERR_INVAL;
-			printf ("Flash %s error at address %lx\n", prompt,
-				info->start[sector]);
-			if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
-				puts ("Command Sequence Error.\n");
-			} else if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS)) {
-				puts ("Block Erase Error.\n");
-				retcode = ERR_NOT_ERASED;
-			} else if (flash_isset (info, sector, 0, FLASH_STATUS_PSLBS)) {
-				puts ("Locking Error\n");
-			}
-			if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
-				puts ("Block locked.\n");
-				retcode = ERR_PROTECTED;
-			}
-			if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
-				puts ("Vpp Low Error.\n");
-		}
-		flash_write_cmd (info, sector, 0, info->cmd_reset);
-		break;
-	default:
-		break;
+	cmdset_intel_read_jedec_ids(info);
+	flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+#ifdef CFG_FLASH_PROTECTION
+	/* read legacy lock/unlock bit from intel flash */
+	if (info->ext_addr) {
+		info->legacy_unlock = flash_read_uchar (info,
+				info->ext_addr + 5) & 0x08;
 	}
-	return retcode;
+#endif
+
+	return 0;
 }
 
-/*-----------------------------------------------------------------------
- */
-static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
+static void cmdset_amd_read_jedec_ids(flash_info_t *info)
 {
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
-	unsigned short	w;
-	unsigned int	l;
-	unsigned long long ll;
-#endif
-
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cword->c = c;
-		break;
-	case FLASH_CFI_16BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
-		w = c;
-		w <<= 8;
-		cword->w = (cword->w >> 8) | w;
-#else
-		cword->w = (cword->w << 8) | c;
-#endif
-		break;
-	case FLASH_CFI_32BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
-		l = c;
-		l <<= 24;
-		cword->l = (cword->l >> 8) | l;
-#else
-		cword->l = (cword->l << 8) | c;
-#endif
-		break;
-	case FLASH_CFI_64BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
-		ll = c;
-		ll <<= 56;
-		cword->ll = (cword->ll >> 8) | ll;
-#else
-		cword->ll = (cword->ll << 8) | c;
-#endif
-		break;
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+	flash_unlock_seq(info, 0);
+	flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
+	udelay(1000); /* some flash are slow to respond */
+	info->manufacturer_id = flash_read_uchar (info,
+					FLASH_OFFSET_MANUFACTURER_ID);
+	info->device_id = flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID);
+	if (info->device_id == 0x7E) {
+		/* AMD 3-byte (expanded) device ids */
+		info->device_id2 = flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID2);
+		info->device_id2 <<= 8;
+		info->device_id2 |= flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID3);
 	}
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
 }
 
-
-/*-----------------------------------------------------------------------
- * make a proper sized command based on the port and chip widths
- */
-static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
+static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
 {
-	int i;
-	uchar *cp = (uchar *) cmdbuf;
+	info->cmd_reset = AMD_CMD_RESET;
 
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
-	for (i = info->portwidth; i > 0; i--)
-#else
-	for (i = 1; i <= info->portwidth; i++)
-#endif
-		*cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd;
+	cmdset_amd_read_jedec_ids(info);
+	flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+	return 0;
 }
 
-/*
- * Write a proper sized command to the correct address
- */
-static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+#ifdef CONFIG_FLASH_CFI_LEGACY
+static void flash_read_jedec_ids (flash_info_t * info)
 {
+	info->manufacturer_id = 0;
+	info->device_id       = 0;
+	info->device_id2      = 0;
 
-	volatile cfiptr_t addr;
-	cfiword_t cword;
-
-	addr.cp = flash_make_addr (info, sect, offset);
-	flash_make_cmd (info, cmd, &cword);
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd,
-		       cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
-		*addr.cp = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp,
-		       cmd, cword.w,
-		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
-		*addr.wp = cword.w;
+	switch (info->vendor) {
+	case CFI_CMDSET_INTEL_STANDARD:
+	case CFI_CMDSET_INTEL_EXTENDED:
+		flash_read_jedec_ids_intel(info);
 		break;
-	case FLASH_CFI_32BIT:
-		debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp,
-		       cmd, cword.l,
-		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
-		*addr.lp = cword.l;
+	case CFI_CMDSET_AMD_STANDARD:
+	case CFI_CMDSET_AMD_EXTENDED:
+		flash_read_jedec_ids_amd(info);
 		break;
-	case FLASH_CFI_64BIT:
-#ifdef DEBUG
-		{
-			char str[20];
-
-			print_longlong (str, cword.ll);
-
-			debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
-			       addr.llp, cmd, str,
-			       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
-		}
-#endif
-		*addr.llp = cword.ll;
+	default:
 		break;
 	}
-
-	/* Ensure all the instructions are fully finished */
-	sync();
-}
-
-static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
-{
-	flash_write_cmd (info, sect, AMD_ADDR_START, AMD_CMD_UNLOCK_START);
-	flash_write_cmd (info, sect, AMD_ADDR_ACK, AMD_CMD_UNLOCK_ACK);
 }
 
 /*-----------------------------------------------------------------------
+ * Call board code to request info about non-CFI flash.
+ * board_flash_get_legacy needs to fill in at least:
+ * info->portwidth, info->chipwidth and info->interface for Jedec probing.
  */
-static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static int flash_detect_legacy(ulong base, int banknum)
 {
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-
-	cptr.cp = flash_make_addr (info, sect, offset);
-	flash_make_cmd (info, cmd, &cword);
+	flash_info_t *info = &flash_info[banknum];
 
-	debug ("is= cmd %x(%c) addr %p ", cmd, cmd, cptr.cp);
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		debug ("is= %x %x\n", cptr.cp[0], cword.c);
-		retval = (cptr.cp[0] == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		debug ("is= %4.4x %4.4x\n", cptr.wp[0], cword.w);
-		retval = (cptr.wp[0] == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		debug ("is= %8.8lx %8.8lx\n", cptr.lp[0], cword.l);
-		retval = (cptr.lp[0] == cword.l);
-		break;
-	case FLASH_CFI_64BIT:
-#ifdef DEBUG
-		{
-			char str1[20];
-			char str2[20];
+	if (board_flash_get_legacy(base, banknum, info)) {
+		/* board code may have filled info completely. If not, we
+		   use JEDEC ID probing. */
+		if (!info->vendor) {
+			int modes[] = {
+				CFI_CMDSET_AMD_STANDARD,
+				CFI_CMDSET_INTEL_STANDARD
+			};
+			int i;
+
+			for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) {
+				info->vendor = modes[i];
+				info->start[0] = base;
+				if (info->portwidth == FLASH_CFI_8BIT
+					&& info->interface == FLASH_CFI_X8X16) {
+					info->addr_unlock1 = 0x2AAA;
+					info->addr_unlock2 = 0x5555;
+				} else {
+					info->addr_unlock1 = 0x5555;
+					info->addr_unlock2 = 0x2AAA;
+				}
+				flash_read_jedec_ids(info);
+				debug("JEDEC PROBE: ID %x %x %x\n",
+						info->manufacturer_id,
+						info->device_id,
+						info->device_id2);
+				if (jedec_flash_match(info, base))
+					break;
+			}
+		}
 
-			print_longlong (str1, cptr.llp[0]);
-			print_longlong (str2, cword.ll);
-			debug ("is= %s %s\n", str1, str2);
+		switch(info->vendor) {
+		case CFI_CMDSET_INTEL_STANDARD:
+		case CFI_CMDSET_INTEL_EXTENDED:
+			info->cmd_reset = FLASH_CMD_RESET;
+			break;
+		case CFI_CMDSET_AMD_STANDARD:
+		case CFI_CMDSET_AMD_EXTENDED:
+		case CFI_CMDSET_AMD_LEGACY:
+			info->cmd_reset = AMD_CMD_RESET;
+			break;
 		}
-#endif
-		retval = (cptr.llp[0] == cword.ll);
-		break;
-	default:
-		retval = 0;
-		break;
+		info->flash_id = FLASH_MAN_CFI;
+		return 1;
 	}
-	return retval;
+	return 0; /* use CFI */
 }
-
-/*-----------------------------------------------------------------------
- */
-static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+#else
+static inline int flash_detect_legacy(ulong base, int banknum)
 {
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-
-	cptr.cp = flash_make_addr (info, sect, offset);
-	flash_make_cmd (info, cmd, &cword);
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		retval = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		retval = ((cptr.lp[0] & cword.l) == cword.l);
-		break;
-	case FLASH_CFI_64BIT:
-		retval = ((cptr.llp[0] & cword.ll) == cword.ll);
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
+	return 0; /* use CFI */
 }
+#endif
 
 /*-----------------------------------------------------------------------
+ * detect if flash is compatible with the Common Flash Interface (CFI)
+ * http://www.jedec.org/download/search/jesd68.pdf
  */
-static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static void flash_read_cfi (flash_info_t *info, void *buf,
+		unsigned int start, size_t len)
 {
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
+	u8 *p = buf;
+	unsigned int i;
 
-	cptr.cp = flash_make_addr (info, sect, offset);
-	flash_make_cmd (info, cmd, &cword);
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = ((cptr.cp[0] & cword.c) != (cptr.cp[0] & cword.c));
-		break;
-	case FLASH_CFI_16BIT:
-		retval = ((cptr.wp[0] & cword.w) != (cptr.wp[0] & cword.w));
-		break;
-	case FLASH_CFI_32BIT:
-		retval = ((cptr.lp[0] & cword.l) != (cptr.lp[0] & cword.l));
-		break;
-	case FLASH_CFI_64BIT:
-		retval = ((cptr.llp[0] & cword.ll) !=
-			  (cptr.llp[0] & cword.ll));
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
+	for (i = 0; i < len; i++)
+		p[i] = flash_read_uchar(info, start + i);
 }
 
-/*-----------------------------------------------------------------------
- * read jedec ids from device and set corresponding fields in info struct
- *
- * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
- *
-*/
-static void flash_read_jedec_ids (flash_info_t * info)
+static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
 {
-	info->manufacturer_id = 0;
-	info->device_id       = 0;
-	info->device_id2      = 0;
+	int cfi_offset;
 
-	switch (info->vendor) {
-	case CFI_CMDSET_INTEL_STANDARD:
-	case CFI_CMDSET_INTEL_EXTENDED:
-		flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-		flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
-		udelay(1000); /* some flash are slow to respond */
-		info->manufacturer_id = flash_read_uchar (info,
-						FLASH_OFFSET_MANUFACTURER_ID);
-		info->device_id = flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID);
-		flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-		break;
-	case CFI_CMDSET_AMD_STANDARD:
-	case CFI_CMDSET_AMD_EXTENDED:
-		flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
-		flash_unlock_seq(info, 0);
-		flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID);
-		udelay(1000); /* some flash are slow to respond */
-		info->manufacturer_id = flash_read_uchar (info,
-						FLASH_OFFSET_MANUFACTURER_ID);
-		info->device_id = flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID);
-		if (info->device_id == 0x7E) {
-			/* AMD 3-byte (expanded) device ids */
-			info->device_id2 = flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID2);
-			info->device_id2 <<= 8;
-			info->device_id2 |= flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID3);
+	flash_write_cmd (info, 0, 0, info->cmd_reset);
+	for (cfi_offset=0;
+	     cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);
+	     cfi_offset++) {
+		flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset],
+				 FLASH_CMD_CFI);
+		if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
+		    && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
+		    && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
+			flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP,
+					sizeof(struct cfi_qry));
+			info->interface	= le16_to_cpu(qry->interface_desc);
+
+			info->cfi_offset = flash_offset_cfi[cfi_offset];
+			debug ("device interface is %d\n",
+			       info->interface);
+			debug ("found port %d chip %d ",
+			       info->portwidth, info->chipwidth);
+			debug ("port %d bits chip %d bits\n",
+			       info->portwidth << CFI_FLASH_SHIFT_WIDTH,
+			       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+
+			/* calculate command offsets as in the Linux driver */
+			info->addr_unlock1 = 0x555;
+			info->addr_unlock2 = 0x2aa;
+
+			/*
+			 * modify the unlock address if we are
+			 * in compatibility mode
+			 */
+			if (	/* x8/x16 in x8 mode */
+				((info->chipwidth == FLASH_CFI_BY8) &&
+					(info->interface == FLASH_CFI_X8X16)) ||
+				/* x16/x32 in x16 mode */
+				((info->chipwidth == FLASH_CFI_BY16) &&
+					(info->interface == FLASH_CFI_X16X32)))
+			{
+				info->addr_unlock1 = 0xaaa;
+				info->addr_unlock2 = 0x555;
+			}
+
+			info->name = "CFI conformant";
+			return 1;
 		}
-		flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
-		break;
-	default:
-		break;
 	}
+
+	return 0;
 }
 
-/*-----------------------------------------------------------------------
- * detect if flash is compatible with the Common Flash Interface (CFI)
- * http://www.jedec.org/download/search/jesd68.pdf
- *
-*/
-static int flash_detect_cfi (flash_info_t * info)
+static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
 {
-	int cfi_offset;
 	debug ("flash detect cfi\n");
 
 	for (info->portwidth = CFG_FLASH_CFI_WIDTH;
 	     info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
 		for (info->chipwidth = FLASH_CFI_BY8;
 		     info->chipwidth <= info->portwidth;
-		     info->chipwidth <<= 1) {
-			flash_write_cmd (info, 0, 0, info->cmd_reset);
-			for (cfi_offset=0; cfi_offset < sizeof(flash_offset_cfi)/sizeof(uint); cfi_offset++) {
-				flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset], FLASH_CMD_CFI);
-				if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
-				 && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
-				 && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
-					info->interface = flash_read_ushort (info, 0, FLASH_OFFSET_INTERFACE);
-					info->cfi_offset=flash_offset_cfi[cfi_offset];
-					debug ("device interface is %d\n",
-						info->interface);
-					debug ("found port %d chip %d ",
-						info->portwidth, info->chipwidth);
-					debug ("port %d bits chip %d bits\n",
-						info->portwidth << CFI_FLASH_SHIFT_WIDTH,
-						info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
-					return 1;
-				}
-			}
-		}
+		     info->chipwidth <<= 1)
+			if (__flash_detect_cfi(info, qry))
+				return 1;
 	}
 	debug ("not found\n");
 	return 0;
 }
 
 /*
+ * Manufacturer-specific quirks. Add workarounds for geometry
+ * reversal, etc. here.
+ */
+static void flash_fixup_amd(flash_info_t *info, struct cfi_qry *qry)
+{
+	/* check if flash geometry needs reversal */
+	if (qry->num_erase_regions > 1) {
+		/* reverse geometry if top boot part */
+		if (info->cfi_version < 0x3131) {
+			/* CFI < 1.1, try to guess from device id */
+			if ((info->device_id & 0x80) != 0)
+				cfi_reverse_geometry(qry);
+		} else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
+			/* CFI >= 1.1, deduct from top/bottom flag */
+			/* note: ext_addr is valid since cfi_version > 0 */
+			cfi_reverse_geometry(qry);
+		}
+	}
+}
+
+static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry)
+{
+	int reverse_geometry = 0;
+
+	/* Check the "top boot" bit in the PRI */
+	if (info->ext_addr && !(flash_read_uchar(info, info->ext_addr + 6) & 1))
+		reverse_geometry = 1;
+
+	/* AT49BV6416(T) list the erase regions in the wrong order.
+	 * However, the device ID is identical with the non-broken
+	 * AT49BV642D since u-boot only reads the low byte (they
+	 * differ in the high byte.) So leave out this fixup for now.
+	 */
+#if 0
+	if (info->device_id == 0xd6 || info->device_id == 0xd2)
+		reverse_geometry = !reverse_geometry;
+#endif
+
+	if (reverse_geometry)
+		cfi_reverse_geometry(qry);
+}
+
+/*
  * The following code cannot be run from FLASH!
  *
  */
@@ -1180,7 +1661,7 @@ ulong flash_get_size (ulong base, int banknum)
 	uchar num_erase_regions;
 	int erase_region_size;
 	int erase_region_count;
-	int geometry_reversed = 0;
+	struct cfi_qry qry;
 
 	info->ext_addr = 0;
 	info->cfi_version = 0;
@@ -1190,56 +1671,50 @@ ulong flash_get_size (ulong base, int banknum)
 
 	info->start[0] = base;
 
-	if (flash_detect_cfi (info)) {
-		info->vendor = flash_read_ushort (info, 0,
-					FLASH_OFFSET_PRIMARY_VENDOR);
-		flash_read_jedec_ids (info);
-		flash_write_cmd (info, 0, info->cfi_offset, FLASH_CMD_CFI);
-		num_erase_regions = flash_read_uchar (info,
-					FLASH_OFFSET_NUM_ERASE_REGIONS);
-		info->ext_addr = flash_read_ushort (info, 0,
-					FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
+	if (flash_detect_cfi (info, &qry)) {
+		info->vendor = le16_to_cpu(qry.p_id);
+		info->ext_addr = le16_to_cpu(qry.p_adr);
+		num_erase_regions = qry.num_erase_regions;
+
 		if (info->ext_addr) {
 			info->cfi_version = (ushort) flash_read_uchar (info,
 						info->ext_addr + 3) << 8;
 			info->cfi_version |= (ushort) flash_read_uchar (info,
 						info->ext_addr + 4);
 		}
+
 #ifdef DEBUG
-		flash_printqry (info, 0);
+		flash_printqry (&qry);
 #endif
+
 		switch (info->vendor) {
 		case CFI_CMDSET_INTEL_STANDARD:
 		case CFI_CMDSET_INTEL_EXTENDED:
-		default:
-			info->cmd_reset = FLASH_CMD_RESET;
-#ifdef CFG_FLASH_PROTECTION
-			/* read legacy lock/unlock bit from intel flash */
-			if (info->ext_addr) {
-				info->legacy_unlock = flash_read_uchar (info,
-						info->ext_addr + 5) & 0x08;
-			}
-#endif
+			cmdset_intel_init(info, &qry);
 			break;
 		case CFI_CMDSET_AMD_STANDARD:
 		case CFI_CMDSET_AMD_EXTENDED:
-			info->cmd_reset = AMD_CMD_RESET;
-			/* check if flash geometry needs reversal */
-			if (num_erase_regions <= 1)
-				break;
-			/* reverse geometry if top boot part */
-			if (info->cfi_version < 0x3131) {
-				/* CFI < 1.1, try to guess from device id */
-				if ((info->device_id & 0x80) != 0) {
-					geometry_reversed = 1;
-				}
-				break;
-			}
-			/* CFI >= 1.1, deduct from top/bottom flag */
-			/* note: ext_addr is valid since cfi_version > 0 */
-			if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
-				geometry_reversed = 1;
-			}
+			cmdset_amd_init(info, &qry);
+			break;
+		default:
+			printf("CFI: Unknown command set 0x%x\n",
+					info->vendor);
+			/*
+			 * Unfortunately, this means we don't know how
+			 * to get the chip back to Read mode. Might
+			 * as well try an Intel-style reset...
+			 */
+			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+			return 0;
+		}
+
+		/* Do manufacturer-specific fixups */
+		switch (info->manufacturer_id) {
+		case 0x0001:
+			flash_fixup_amd(info, &qry);
+			break;
+		case 0x001f:
+			flash_fixup_atmel(info, &qry);
 			break;
 		}
 
@@ -1267,26 +1742,27 @@ ulong flash_get_size (ulong base, int banknum)
 					num_erase_regions, NUM_ERASE_REGIONS);
 				break;
 			}
-			if (geometry_reversed)
-				tmp = flash_read_long (info, 0,
-					       FLASH_OFFSET_ERASE_REGIONS +
-					       (num_erase_regions - 1 - i) * 4);
-			else
-				tmp = flash_read_long (info, 0,
-					       FLASH_OFFSET_ERASE_REGIONS +
-					       i * 4);
+
+			tmp = le32_to_cpu(qry.erase_region_info[i]);
+			debug("erase region %u: 0x%08lx\n", i, tmp);
+
+			erase_region_count = (tmp & 0xffff) + 1;
+			tmp >>= 16;
 			erase_region_size =
 				(tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
-			tmp >>= 16;
-			erase_region_count = (tmp & 0xffff) + 1;
 			debug ("erase_region_count = %d erase_region_size = %d\n",
 				erase_region_count, erase_region_size);
 			for (j = 0; j < erase_region_count; j++) {
+				if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+					printf("ERROR: too many flash sectors\n");
+					break;
+				}
 				info->start[sect_cnt] = sector;
 				sector += (erase_region_size * size_ratio);
 
 				/*
-				 * Only read protection status from supported devices (intel...)
+				 * Only read protection status from
+				 * supported devices (intel...)
 				 */
 				switch (info->vendor) {
 				case CFI_CMDSET_INTEL_EXTENDED:
@@ -1297,7 +1773,8 @@ ulong flash_get_size (ulong base, int banknum)
 							     FLASH_STATUS_PROTECT);
 					break;
 				default:
-					info->protect[sect_cnt] = 0; /* default: not protected */
+					/* default: not protected */
+					info->protect[sect_cnt] = 0;
 				}
 
 				sect_cnt++;
@@ -1305,20 +1782,27 @@ ulong flash_get_size (ulong base, int banknum)
 		}
 
 		info->sector_count = sect_cnt;
+		info->size = 1 << qry.dev_size;
 		/* multiply the size by the number of chips */
-		info->size = (1 << flash_read_uchar (info, FLASH_OFFSET_SIZE)) * size_ratio;
-		info->buffer_size = (1 << flash_read_ushort (info, 0, FLASH_OFFSET_BUFFER_SIZE));
-		tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT);
-		info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT)));
-		tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT)) *
-			(1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT));
-		info->buffer_write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */
-		tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) *
-		      (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT));
-		info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */
+		info->size *= size_ratio;
+		info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size);
+		tmp = 1 << qry.block_erase_timeout_typ;
+		info->erase_blk_tout = tmp *
+			(1 << qry.block_erase_timeout_max);
+		tmp = (1 << qry.buf_write_timeout_typ) *
+			(1 << qry.buf_write_timeout_max);
+
+		/* round up when converting to ms */
+		info->buffer_write_tout = (tmp + 999) / 1000;
+		tmp = (1 << qry.word_write_timeout_typ) *
+			(1 << qry.word_write_timeout_max);
+		/* round up when converting to ms */
+		info->write_tout = (tmp + 999) / 1000;
 		info->flash_id = FLASH_MAN_CFI;
-		if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) {
-			info->portwidth >>= 1;	/* XXX - Need to test on x8/x16 in parallel. */
+		if ((info->interface == FLASH_CFI_X8X16) &&
+		    (info->chipwidth == FLASH_CFI_BY8)) {
+			/* XXX - Need to test on x8/x16 in parallel. */
+			info->portwidth >>= 1;
 		}
 	}
 
@@ -1326,203 +1810,106 @@ ulong flash_get_size (ulong base, int banknum)
 	return (info->size);
 }
 
-/* loop through the sectors from the highest address
- * when the passed address is greater or equal to the sector address
- * we have a match
- */
-static flash_sect_t find_sector (flash_info_t * info, ulong addr)
-{
-	flash_sect_t sector;
-
-	for (sector = info->sector_count - 1; sector >= 0; sector--) {
-		if (addr >= info->start[sector])
-			break;
-	}
-	return sector;
-}
-
 /*-----------------------------------------------------------------------
  */
-static int flash_write_cfiword (flash_info_t * info, ulong dest,
-				cfiword_t cword)
+unsigned long flash_init (void)
 {
-	cfiptr_t ctladdr;
-	cfiptr_t cptr;
-	int flag;
-
-	ctladdr.cp = flash_make_addr (info, 0, 0);
-	cptr.cp = (uchar *) dest;
-
-	/* Check if Flash is (sufficiently) erased */
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		flag = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		flag = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		flag = ((cptr.lp[0] & cword.l) == cword.l);
-		break;
-	case FLASH_CFI_64BIT:
-		flag = ((cptr.llp[0] & cword.ll) == cword.ll);
-		break;
-	default:
-		return 2;
-	}
-	if (!flag)
-		return 2;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
+	unsigned long size = 0;
+	int i;
 
-	switch (info->vendor) {
-	case CFI_CMDSET_INTEL_EXTENDED:
-	case CFI_CMDSET_INTEL_STANDARD:
-		flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
-		flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
-		break;
-	case CFI_CMDSET_AMD_EXTENDED:
-	case CFI_CMDSET_AMD_STANDARD:
-		flash_unlock_seq (info, 0);
-		flash_write_cmd (info, 0, AMD_ADDR_START, AMD_CMD_WRITE);
-		break;
-	}
+#ifdef CFG_FLASH_PROTECTION
+	char *s = getenv("unlock");
+#endif
 
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cptr.cp[0] = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		cptr.wp[0] = cword.w;
-		break;
-	case FLASH_CFI_32BIT:
-		cptr.lp[0] = cword.l;
-		break;
-	case FLASH_CFI_64BIT:
-		cptr.llp[0] = cword.ll;
-		break;
-	}
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
 
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
+		if (!flash_detect_legacy (bank_base[i], i))
+			flash_get_size (bank_base[i], i);
+		size += flash_info[i].size;
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+#ifndef CFG_FLASH_QUIET_TEST
+			printf ("## Unknown FLASH on Bank %d "
+				"- Size = 0x%08lx = %ld MB\n",
+				i+1, flash_info[i].size,
+				flash_info[i].size << 20);
+#endif /* CFG_FLASH_QUIET_TEST */
+		}
+#ifdef CFG_FLASH_PROTECTION
+		else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
+			/*
+			 * Only the U-Boot image and it's environment
+			 * is protected, all other sectors are
+			 * unprotected (unlocked) if flash hardware
+			 * protection is used (CFG_FLASH_PROTECTION)
+			 * and the environment variable "unlock" is
+			 * set to "yes".
+			 */
+			if (flash_info[i].legacy_unlock) {
+				int k;
 
-	return flash_full_status_check (info, find_sector (info, dest),
-					info->write_tout, "write");
-}
+				/*
+				 * Disable legacy_unlock temporarily,
+				 * since flash_real_protect would
+				 * relock all other sectors again
+				 * otherwise.
+				 */
+				flash_info[i].legacy_unlock = 0;
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+				/*
+				 * Legacy unlocking (e.g. Intel J3) ->
+				 * unlock only one sector. This will
+				 * unlock all sectors.
+				 */
+				flash_real_protect (&flash_info[i], 0, 0);
 
-static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
-				  int len)
-{
-	flash_sect_t sector;
-	int cnt;
-	int retcode;
-	volatile cfiptr_t src;
-	volatile cfiptr_t dst;
+				flash_info[i].legacy_unlock = 1;
 
-	switch (info->vendor) {
-	case CFI_CMDSET_INTEL_STANDARD:
-	case CFI_CMDSET_INTEL_EXTENDED:
-		src.cp = cp;
-		dst.cp = (uchar *) dest;
-		sector = find_sector (info, dest);
-		flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-		flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
-		if ((retcode = flash_status_check (info, sector, info->buffer_write_tout,
-						   "write to buffer")) == ERR_OK) {
-			/* reduce the number of loops by the width of the port	*/
-			switch (info->portwidth) {
-			case FLASH_CFI_8BIT:
-				cnt = len;
-				break;
-			case FLASH_CFI_16BIT:
-				cnt = len >> 1;
-				break;
-			case FLASH_CFI_32BIT:
-				cnt = len >> 2;
-				break;
-			case FLASH_CFI_64BIT:
-				cnt = len >> 3;
-				break;
-			default:
-				return ERR_INVAL;
-				break;
-			}
-			flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
-			while (cnt-- > 0) {
-				switch (info->portwidth) {
-				case FLASH_CFI_8BIT:
-					*dst.cp++ = *src.cp++;
-					break;
-				case FLASH_CFI_16BIT:
-					*dst.wp++ = *src.wp++;
-					break;
-				case FLASH_CFI_32BIT:
-					*dst.lp++ = *src.lp++;
-					break;
-				case FLASH_CFI_64BIT:
-					*dst.llp++ = *src.llp++;
-					break;
-				default:
-					return ERR_INVAL;
-					break;
-				}
+				/*
+				 * Manually mark other sectors as
+				 * unlocked (unprotected)
+				 */
+				for (k = 1; k < flash_info[i].sector_count; k++)
+					flash_info[i].protect[k] = 0;
+			} else {
+				/*
+				 * No legancy unlocking -> unlock all sectors
+				 */
+				flash_protect (FLAG_PROTECT_CLEAR,
+					       flash_info[i].start[0],
+					       flash_info[i].start[0]
+					       + flash_info[i].size - 1,
+					       &flash_info[i]);
 			}
-			flash_write_cmd (info, sector, 0,
-					 FLASH_CMD_WRITE_BUFFER_CONFIRM);
-			retcode = flash_full_status_check (info, sector,
-							   info->buffer_write_tout,
-							   "buffer write");
 		}
-		return retcode;
-
-	case CFI_CMDSET_AMD_STANDARD:
-	case CFI_CMDSET_AMD_EXTENDED:
-		src.cp = cp;
-		dst.cp = (uchar *) dest;
-		sector = find_sector (info, dest);
-
-		flash_unlock_seq(info,0);
-		flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_TO_BUFFER);
+#endif /* CFG_FLASH_PROTECTION */
+	}
 
-		switch (info->portwidth) {
-		case FLASH_CFI_8BIT:
-			cnt = len;
-			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
-			while (cnt-- > 0) *dst.cp++ = *src.cp++;
-			break;
-		case FLASH_CFI_16BIT:
-			cnt = len >> 1;
-			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
-			while (cnt-- > 0) *dst.wp++ = *src.wp++;
-			break;
-		case FLASH_CFI_32BIT:
-			cnt = len >> 2;
-			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
-			while (cnt-- > 0) *dst.lp++ = *src.lp++;
-			break;
-		case FLASH_CFI_64BIT:
-			cnt = len >> 3;
-			flash_write_cmd (info, sector, 0,  (uchar) cnt - 1);
-			while (cnt-- > 0) *dst.llp++ = *src.llp++;
-			break;
-		default:
-			return ERR_INVAL;
-		}
+	/* Monitor protection ON by default */
+#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_MONITOR_BASE,
+		       CFG_MONITOR_BASE + monitor_flash_len  - 1,
+		       flash_get_info(CFG_MONITOR_BASE));
+#endif
 
-		flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
-		retcode = flash_full_status_check (info, sector, info->buffer_write_tout,
-						   "buffer write");
-		return retcode;
+	/* Environment protection ON by default */
+#ifdef CFG_ENV_IS_IN_FLASH
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+		       flash_get_info(CFG_ENV_ADDR));
+#endif
 
-	default:
-		debug ("Unknown Command Set\n");
-		return ERR_INVAL;
-	}
+	/* Redundant environment protection ON by default */
+#ifdef CFG_ENV_ADDR_REDUND
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR_REDUND,
+		       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+		       flash_get_info(CFG_ENV_ADDR_REDUND));
+#endif
+	return (size);
 }
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
 
 #endif /* CFG_FLASH_CFI */
diff --git a/drivers/dataflash.c b/drivers/mtd/dataflash.c
index 91903c8c8..91903c8c8 100644
--- a/drivers/dataflash.c
+++ b/drivers/mtd/dataflash.c
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
new file mode 100644
index 000000000..94e87cbf0
--- /dev/null
+++ b/drivers/mtd/jedec_flash.c
@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2007
+ * Michael Schwingen, <michael@schwingen.org>
+ *
+ * based in great part on jedec_probe.c from linux kernel:
+ * (C) 2000 Red Hat. GPL'd.
+ * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* The DEBUG define must be before common to enable debugging */
+/*#define DEBUG*/
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <environment.h>
+
+#define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY
+
+/* Manufacturers */
+#define MANUFACTURER_AMD	0x0001
+#define MANUFACTURER_SST	0x00BF
+
+/* AMD */
+#define AM29DL800BB	0x22C8
+#define AM29DL800BT	0x224A
+
+#define AM29F800BB	0x2258
+#define AM29F800BT	0x22D6
+#define AM29LV400BB	0x22BA
+#define AM29LV400BT	0x22B9
+#define AM29LV800BB	0x225B
+#define AM29LV800BT	0x22DA
+#define AM29LV160DT	0x22C4
+#define AM29LV160DB	0x2249
+#define AM29F017D	0x003D
+#define AM29F016D	0x00AD
+#define AM29F080	0x00D5
+#define AM29F040	0x00A4
+#define AM29LV040B	0x004F
+#define AM29F032B	0x0041
+#define AM29F002T	0x00B0
+
+/* SST */
+#define SST39LF800	0x2781
+#define SST39LF160	0x2782
+#define SST39VF1601	0x234b
+#define SST39LF512	0x00D4
+#define SST39LF010	0x00D5
+#define SST39LF020	0x00D6
+#define SST39LF040	0x00D7
+#define SST39SF010A	0x00B5
+#define SST39SF020A	0x00B6
+
+
+/*
+ * Unlock address sets for AMD command sets.
+ * Intel command sets use the MTD_UADDR_UNNECESSARY.
+ * Each identifier, except MTD_UADDR_UNNECESSARY, and
+ * MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[].
+ * MTD_UADDR_NOT_SUPPORTED must be 0 so that structure
+ * initialization need not require initializing all of the
+ * unlock addresses for all bit widths.
+ */
+enum uaddr {
+	MTD_UADDR_NOT_SUPPORTED = 0,	/* data width not supported */
+	MTD_UADDR_0x0555_0x02AA,
+	MTD_UADDR_0x0555_0x0AAA,
+	MTD_UADDR_0x5555_0x2AAA,
+	MTD_UADDR_0x0AAA_0x0555,
+	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
+	MTD_UADDR_UNNECESSARY,		/* Does not require any address */
+};
+
+
+struct unlock_addr {
+	u32 addr1;
+	u32 addr2;
+};
+
+
+/*
+ * I don't like the fact that the first entry in unlock_addrs[]
+ * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
+ * should not be used.  The  problem is that structures with
+ * initializers have extra fields initialized to 0.  It is _very_
+ * desireable to have the unlock address entries for unsupported
+ * data widths automatically initialized - that means that
+ * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
+ * must go unused.
+ */
+static const struct unlock_addr  unlock_addrs[] = {
+	[MTD_UADDR_NOT_SUPPORTED] = {
+		.addr1 = 0xffff,
+		.addr2 = 0xffff
+	},
+
+	[MTD_UADDR_0x0555_0x02AA] = {
+		.addr1 = 0x0555,
+		.addr2 = 0x02aa
+	},
+
+	[MTD_UADDR_0x0555_0x0AAA] = {
+		.addr1 = 0x0555,
+		.addr2 = 0x0aaa
+	},
+
+	[MTD_UADDR_0x5555_0x2AAA] = {
+		.addr1 = 0x5555,
+		.addr2 = 0x2aaa
+	},
+
+	[MTD_UADDR_0x0AAA_0x0555] = {
+		.addr1 = 0x0AAA,
+		.addr2 = 0x0555
+	},
+
+	[MTD_UADDR_DONT_CARE] = {
+		.addr1 = 0x0000,      /* Doesn't matter which address */
+		.addr2 = 0x0000       /* is used - must be last entry */
+	},
+
+	[MTD_UADDR_UNNECESSARY] = {
+		.addr1 = 0x0000,
+		.addr2 = 0x0000
+	}
+};
+
+
+struct amd_flash_info {
+	const __u16 mfr_id;
+	const __u16 dev_id;
+	const char *name;
+	const int DevSize;
+	const int NumEraseRegions;
+	const int CmdSet;
+	const __u8 uaddr[4];		/* unlock addrs for 8, 16, 32, 64 */
+	const ulong regions[6];
+};
+
+#define ERASEINFO(size,blocks) (size<<8)|(blocks-1)
+
+#define SIZE_64KiB  16
+#define SIZE_128KiB 17
+#define SIZE_256KiB 18
+#define SIZE_512KiB 19
+#define SIZE_1MiB   20
+#define SIZE_2MiB   21
+#define SIZE_4MiB   22
+#define SIZE_8MiB   23
+
+static const struct amd_flash_info jedec_table[] = {
+#ifdef CFG_FLASH_LEGACY_256Kx8
+	{
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39LF020,
+		.name		= "SST 39LF020",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,64),
+		}
+	},
+#endif
+#ifdef CFG_FLASH_LEGACY_512Kx8
+	{
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV040B,
+		.name		= "AMD AM29LV040B",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8),
+		}
+	},
+	{
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39LF040,
+		.name		= "SST 39LF040",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,128),
+		}
+	},
+#endif
+};
+
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+
+static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base)
+{
+	int i,j;
+	int sect_cnt;
+	int size_ratio;
+	int total_size;
+	enum uaddr uaddr_idx;
+
+	size_ratio = info->portwidth / info->chipwidth;
+
+	debug("Found JEDEC Flash: %s\n", jedec_entry->name);
+	info->vendor = jedec_entry->CmdSet;
+	/* Todo: do we need device-specific timeouts? */
+	info->erase_blk_tout = 30000;
+	info->buffer_write_tout = 1000;
+	info->write_tout = 100;
+	info->name = jedec_entry->name;
+
+	/* copy unlock addresses from device table to CFI info struct. This
+	   is just here because the addresses are in the table anyway - if
+	   the flash is not detected due to wrong unlock addresses,
+	   flash_detect_legacy would have to try all of them before we even
+	   get here. */
+	switch(info->chipwidth) {
+	case FLASH_CFI_8BIT:
+		uaddr_idx = jedec_entry->uaddr[0];
+		break;
+	case FLASH_CFI_16BIT:
+		uaddr_idx = jedec_entry->uaddr[1];
+		break;
+	case FLASH_CFI_32BIT:
+		uaddr_idx = jedec_entry->uaddr[2];
+		break;
+	default:
+		uaddr_idx = MTD_UADDR_NOT_SUPPORTED;
+		break;
+	}
+
+	debug("unlock address index %d\n", uaddr_idx);
+	info->addr_unlock1 = unlock_addrs[uaddr_idx].addr1;
+	info->addr_unlock2 = unlock_addrs[uaddr_idx].addr2;
+	debug("unlock addresses are 0x%x/0x%x\n", info->addr_unlock1, info->addr_unlock2);
+
+	sect_cnt = 0;
+	total_size = 0;
+	for (i = 0; i < jedec_entry->NumEraseRegions; i++) {
+		ulong erase_region_size = jedec_entry->regions[i] >> 8;
+		ulong erase_region_count = (jedec_entry->regions[i] & 0xff) + 1;
+
+		total_size += erase_region_size * erase_region_count;
+		debug ("erase_region_count = %d erase_region_size = %d\n",
+		       erase_region_count, erase_region_size);
+		for (j = 0; j < erase_region_count; j++) {
+			if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+				printf("ERROR: too many flash sectors\n");
+				break;
+			}
+			info->start[sect_cnt] = base;
+			base += (erase_region_size * size_ratio);
+			sect_cnt++;
+		}
+	}
+	info->sector_count = sect_cnt;
+	info->size = total_size * size_ratio;
+}
+
+/*-----------------------------------------------------------------------
+ * match jedec ids against table. If a match is found, fill flash_info entry
+ */
+int jedec_flash_match(flash_info_t *info, ulong base)
+{
+	int ret = 0;
+	int i;
+	ulong mask = 0xFFFF;
+	if (info->chipwidth == 1)
+		mask = 0xFF;
+
+	for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
+		if ((jedec_table[i].mfr_id & mask) == (info->manufacturer_id & mask) &&
+		    (jedec_table[i].dev_id & mask) == (info->device_id & mask)) {
+			fill_info(info, &jedec_table[i], base);
+			ret = 1;
+			break;
+		}
+	}
+	return ret;
+}
diff --git a/drivers/mw_eeprom.c b/drivers/mtd/mw_eeprom.c
index 2b3348810..2b3348810 100644
--- a/drivers/mw_eeprom.c
+++ b/drivers/mtd/mw_eeprom.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
new file mode 100644
index 000000000..42864f98f
--- /dev/null
+++ b/drivers/mtd/nand/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libnand.a
+
+COBJS-y += nand.o
+COBJS-y += nand_base.o
+COBJS-y += nand_ids.o
+COBJS-y += nand_ecc.o
+COBJS-y += nand_bbt.o
+COBJS-y += nand_util.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e17af70d0..e17af70d0 100644
--- a/drivers/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
diff --git a/drivers/nand/nand.c b/drivers/mtd/nand/nand.c
index 27b5792bc..27b5792bc 100644
--- a/drivers/nand/nand.c
+++ b/drivers/mtd/nand/nand.c
diff --git a/drivers/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 151f535c5..151f535c5 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
diff --git a/drivers/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 19a9bc2a5..19a9bc2a5 100644
--- a/drivers/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
diff --git a/drivers/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 4c532b079..4c532b079 100644
--- a/drivers/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
diff --git a/drivers/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 6d7e347fb..6d7e347fb 100644
--- a/drivers/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
diff --git a/drivers/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 4fd4e166e..4fd4e166e 100644
--- a/drivers/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
diff --git a/drivers/nand_legacy/Makefile b/drivers/mtd/nand_legacy/Makefile
index 95314d80b..95314d80b 100644
--- a/drivers/nand_legacy/Makefile
+++ b/drivers/mtd/nand_legacy/Makefile
diff --git a/drivers/nand_legacy/nand_legacy.c b/drivers/mtd/nand_legacy/nand_legacy.c
index 49d2ebb67..49d2ebb67 100644
--- a/drivers/nand_legacy/nand_legacy.c
+++ b/drivers/mtd/nand_legacy/nand_legacy.c
diff --git a/drivers/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 204941332..204941332 100644
--- a/drivers/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
diff --git a/drivers/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 7983a4a0d..7983a4a0d 100644
--- a/drivers/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
diff --git a/drivers/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 5a610ee5e..5a610ee5e 100644
--- a/drivers/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
diff --git a/drivers/3c589.c b/drivers/net/3c589.c
index 080b686e2..080b686e2 100644
--- a/drivers/3c589.c
+++ b/drivers/net/3c589.c
diff --git a/drivers/3c589.h b/drivers/net/3c589.h
index 6735bf9f6..6735bf9f6 100644
--- a/drivers/3c589.h
+++ b/drivers/net/3c589.h
diff --git a/drivers/5701rls.c b/drivers/net/5701rls.c
index 86950d0f8..86950d0f8 100644
--- a/drivers/5701rls.c
+++ b/drivers/net/5701rls.c
diff --git a/drivers/5701rls.h b/drivers/net/5701rls.h
index 30b127a42..30b127a42 100644
--- a/drivers/5701rls.h
+++ b/drivers/net/5701rls.h
diff --git a/drivers/8390.h b/drivers/net/8390.h
index f087217ed..f087217ed 100644
--- a/drivers/8390.h
+++ b/drivers/net/8390.h
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 37d69b994..41e1bdeb3 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -25,8 +25,39 @@ include $(TOPDIR)/config.mk
 
 LIB 	:= $(obj)libnet.a
 
-COBJS 	:= mcffec.o
+COBJS-y += 3c589.o
+COBJS-y += bcm570x.o bcm570x_autoneg.o 5701rls.o
+COBJS-y += cs8900.o
+COBJS-y += dc2114x.o
+COBJS-y += dm9000x.o
+COBJS-y += e1000.o
+COBJS-y += eepro100.o
+COBJS-y += enc28j60.o
+COBJS-y += inca-ip_sw.o
+COBJS-y += ks8695eth.o
+COBJS-y += lan91c96.o
+COBJS-y += macb.o
+COBJS-y += mcffec.o
+COBJS-y += natsemi.o
+COBJS-y += ne2000.o
+COBJS-y += netarm_eth.o
+COBJS-y += netconsole.o
+COBJS-y += ns7520_eth.o
+COBJS-y += ns8382x.o
+COBJS-y += ns9750_eth.o
+COBJS-y += pcnet.o
+COBJS-y += plb2800_eth.o
+COBJS-y += rtl8019.o
+COBJS-y += rtl8139.o
+COBJS-y += rtl8169.o
+COBJS-y += s3c4510b_eth.o
+COBJS-y += smc91111.o
+COBJS-y += tigon3.o
+COBJS-y += tsec.o
+COBJS-y += tsi108_eth.o
+COBJS-y += uli526x.o
 
+COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
 OBJS 	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/bcm570x.c b/drivers/net/bcm570x.c
index c8f406422..c8f406422 100644
--- a/drivers/bcm570x.c
+++ b/drivers/net/bcm570x.c
diff --git a/drivers/bcm570x_autoneg.c b/drivers/net/bcm570x_autoneg.c
index 9023796aa..9023796aa 100644
--- a/drivers/bcm570x_autoneg.c
+++ b/drivers/net/bcm570x_autoneg.c
diff --git a/drivers/bcm570x_autoneg.h b/drivers/net/bcm570x_autoneg.h
index 7830944b8..7830944b8 100644
--- a/drivers/bcm570x_autoneg.h
+++ b/drivers/net/bcm570x_autoneg.h
diff --git a/drivers/bcm570x_bits.h b/drivers/net/bcm570x_bits.h
index 615d61e98..615d61e98 100644
--- a/drivers/bcm570x_bits.h
+++ b/drivers/net/bcm570x_bits.h
diff --git a/drivers/bcm570x_debug.h b/drivers/net/bcm570x_debug.h
index 88e209b0f..88e209b0f 100644
--- a/drivers/bcm570x_debug.h
+++ b/drivers/net/bcm570x_debug.h
diff --git a/drivers/bcm570x_lm.h b/drivers/net/bcm570x_lm.h
index 2ea6ca8fa..2ea6ca8fa 100644
--- a/drivers/bcm570x_lm.h
+++ b/drivers/net/bcm570x_lm.h
diff --git a/drivers/bcm570x_mm.h b/drivers/net/bcm570x_mm.h
index ff5302f47..ff5302f47 100644
--- a/drivers/bcm570x_mm.h
+++ b/drivers/net/bcm570x_mm.h
diff --git a/drivers/bcm570x_queue.h b/drivers/net/bcm570x_queue.h
index 336b3caa4..336b3caa4 100644
--- a/drivers/bcm570x_queue.h
+++ b/drivers/net/bcm570x_queue.h
diff --git a/drivers/cs8900.c b/drivers/net/cs8900.c
index 80c4ba21a..80c4ba21a 100644
--- a/drivers/cs8900.c
+++ b/drivers/net/cs8900.c
diff --git a/drivers/cs8900.h b/drivers/net/cs8900.h
index f886d103c..f886d103c 100644
--- a/drivers/cs8900.h
+++ b/drivers/net/cs8900.h
diff --git a/drivers/dc2114x.c b/drivers/net/dc2114x.c
index d5275dceb..d5275dceb 100644
--- a/drivers/dc2114x.c
+++ b/drivers/net/dc2114x.c
diff --git a/drivers/dm9000x.c b/drivers/net/dm9000x.c
index 6131b5c35..6131b5c35 100644
--- a/drivers/dm9000x.c
+++ b/drivers/net/dm9000x.c
diff --git a/drivers/dm9000x.h b/drivers/net/dm9000x.h
index f47ff8cb3..f47ff8cb3 100644
--- a/drivers/dm9000x.h
+++ b/drivers/net/dm9000x.h
diff --git a/drivers/e1000.c b/drivers/net/e1000.c
index f0741da82..f0741da82 100644
--- a/drivers/e1000.c
+++ b/drivers/net/e1000.c
diff --git a/drivers/e1000.h b/drivers/net/e1000.h
index 0fbdc90b1..0fbdc90b1 100644
--- a/drivers/e1000.h
+++ b/drivers/net/e1000.h
diff --git a/drivers/eepro100.c b/drivers/net/eepro100.c
index 738146e66..738146e66 100644
--- a/drivers/eepro100.c
+++ b/drivers/net/eepro100.c
diff --git a/drivers/enc28j60.c b/drivers/net/enc28j60.c
index 98303acee..98303acee 100644
--- a/drivers/enc28j60.c
+++ b/drivers/net/enc28j60.c
diff --git a/drivers/inca-ip_sw.c b/drivers/net/inca-ip_sw.c
index e4aaed6af..e4aaed6af 100644
--- a/drivers/inca-ip_sw.c
+++ b/drivers/net/inca-ip_sw.c
diff --git a/drivers/ks8695eth.c b/drivers/net/ks8695eth.c
index b598dd7f2..b598dd7f2 100644
--- a/drivers/ks8695eth.c
+++ b/drivers/net/ks8695eth.c
diff --git a/drivers/lan91c96.c b/drivers/net/lan91c96.c
index ecdcbd9b3..ecdcbd9b3 100644
--- a/drivers/lan91c96.c
+++ b/drivers/net/lan91c96.c
diff --git a/drivers/lan91c96.h b/drivers/net/lan91c96.h
index 7d33a821f..7d33a821f 100644
--- a/drivers/lan91c96.h
+++ b/drivers/net/lan91c96.h
diff --git a/drivers/macb.c b/drivers/net/macb.c
index 95cdc496c..95cdc496c 100644
--- a/drivers/macb.c
+++ b/drivers/net/macb.c
diff --git a/drivers/macb.h b/drivers/net/macb.h
index c778e4ee4..c778e4ee4 100644
--- a/drivers/macb.h
+++ b/drivers/net/macb.h
diff --git a/drivers/natsemi.c b/drivers/net/natsemi.c
index 075d6c52c..075d6c52c 100644
--- a/drivers/natsemi.c
+++ b/drivers/net/natsemi.c
diff --git a/drivers/ne2000.c b/drivers/net/ne2000.c
index c978d62ef..c978d62ef 100644
--- a/drivers/ne2000.c
+++ b/drivers/net/ne2000.c
diff --git a/drivers/ne2000.h b/drivers/net/ne2000.h
index c13d9f0bb..c13d9f0bb 100644
--- a/drivers/ne2000.h
+++ b/drivers/net/ne2000.h
diff --git a/drivers/netarm_eth.c b/drivers/net/netarm_eth.c
index a99ee5da2..a99ee5da2 100644
--- a/drivers/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
diff --git a/drivers/netarm_eth.h b/drivers/net/netarm_eth.h
index 8edab82da..8edab82da 100644
--- a/drivers/netarm_eth.h
+++ b/drivers/net/netarm_eth.h
diff --git a/drivers/netconsole.c b/drivers/net/netconsole.c
index 69089f92c..69089f92c 100644
--- a/drivers/netconsole.c
+++ b/drivers/net/netconsole.c
diff --git a/drivers/nicext.h b/drivers/net/nicext.h
index 4074972c0..4074972c0 100644
--- a/drivers/nicext.h
+++ b/drivers/net/nicext.h
diff --git a/drivers/ns7520_eth.c b/drivers/net/ns7520_eth.c
index a5a20dfd7..a5a20dfd7 100644
--- a/drivers/ns7520_eth.c
+++ b/drivers/net/ns7520_eth.c
diff --git a/drivers/ns8382x.c b/drivers/net/ns8382x.c
index f8b143a01..f8b143a01 100644
--- a/drivers/ns8382x.c
+++ b/drivers/net/ns8382x.c
diff --git a/drivers/ns9750_eth.c b/drivers/net/ns9750_eth.c
index 067ff8efa..067ff8efa 100644
--- a/drivers/ns9750_eth.c
+++ b/drivers/net/ns9750_eth.c
diff --git a/drivers/pcnet.c b/drivers/net/pcnet.c
index 2af0e8f24..2af0e8f24 100644
--- a/drivers/pcnet.c
+++ b/drivers/net/pcnet.c
diff --git a/drivers/plb2800_eth.c b/drivers/net/plb2800_eth.c
index 0ae5d808a..0ae5d808a 100644
--- a/drivers/plb2800_eth.c
+++ b/drivers/net/plb2800_eth.c
diff --git a/drivers/rtl8019.c b/drivers/net/rtl8019.c
index 409a69f02..409a69f02 100644
--- a/drivers/rtl8019.c
+++ b/drivers/net/rtl8019.c
diff --git a/drivers/rtl8019.h b/drivers/net/rtl8019.h
index 38116ad84..38116ad84 100644
--- a/drivers/rtl8019.h
+++ b/drivers/net/rtl8019.h
diff --git a/drivers/rtl8139.c b/drivers/net/rtl8139.c
index 236718005..236718005 100644
--- a/drivers/rtl8139.c
+++ b/drivers/net/rtl8139.c
diff --git a/drivers/rtl8169.c b/drivers/net/rtl8169.c
index 63ea2cca9..63ea2cca9 100644
--- a/drivers/rtl8169.c
+++ b/drivers/net/rtl8169.c
diff --git a/drivers/s3c4510b_eth.c b/drivers/net/s3c4510b_eth.c
index 48901aa12..3d9066abe 100644
--- a/drivers/s3c4510b_eth.c
+++ b/drivers/net/s3c4510b_eth.c
@@ -175,7 +175,7 @@ s32 eth_send(volatile void *packet, s32 length)
 	}
 
 	/* copy user data into frame data pointer */
-	memcpy((void *)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr),
+	memcpy((void *)((u32)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr)),
 	       (void *)packet,
 	       length);
 
diff --git a/drivers/s3c4510b_eth.h b/drivers/net/s3c4510b_eth.h
index cbddba71a..cbddba71a 100644
--- a/drivers/s3c4510b_eth.h
+++ b/drivers/net/s3c4510b_eth.h
diff --git a/drivers/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
index 7e50b1df9..a7d4a3b7a 100644
--- a/drivers/sk98lin/Makefile
+++ b/drivers/net/sk98lin/Makefile
@@ -29,12 +29,26 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libsk98lin.a
 
-COBJS	:= skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
-		ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
-		skxmac2.o skcsum.o #skproc.o
-
-COBJS	+= uboot_skb.o uboot_drv.o
-
+COBJS-y += skge.o
+COBJS-y += skaddr.o
+COBJS-y += skgehwt.o
+COBJS-y += skgeinit.o
+COBJS-y += skgepnmi.o
+COBJS-y += skgesirq.o
+COBJS-y += ski2c.o
+COBJS-y += sklm80.o
+COBJS-y += skqueue.o
+COBJS-y += skrlmt.o
+COBJS-y += sktimer.o
+COBJS-y += skvpd.o
+COBJS-y += skxmac2.o
+COBJS-y += skcsum.o
+#COBJS-y += skproc.o
+
+COBJS-y += uboot_skb.o
+COBJS-y += uboot_drv.o
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h
index 981a4cab0..981a4cab0 100644
--- a/drivers/sk98lin/h/lm80.h
+++ b/drivers/net/sk98lin/h/lm80.h
diff --git a/drivers/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h
index 711f873e7..711f873e7 100644
--- a/drivers/sk98lin/h/skaddr.h
+++ b/drivers/net/sk98lin/h/skaddr.h
diff --git a/drivers/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h
index 2acae329e..2acae329e 100644
--- a/drivers/sk98lin/h/skcsum.h
+++ b/drivers/net/sk98lin/h/skcsum.h
diff --git a/drivers/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h
index cf5b5ad33..cf5b5ad33 100644
--- a/drivers/sk98lin/h/skdebug.h
+++ b/drivers/net/sk98lin/h/skdebug.h
diff --git a/drivers/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
index af34d7b96..af34d7b96 100644
--- a/drivers/sk98lin/h/skdrv1st.h
+++ b/drivers/net/sk98lin/h/skdrv1st.h
diff --git a/drivers/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
index a311827aa..a311827aa 100644
--- a/drivers/sk98lin/h/skdrv2nd.h
+++ b/drivers/net/sk98lin/h/skdrv2nd.h
diff --git a/drivers/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h
index a454d9daa..a454d9daa 100644
--- a/drivers/sk98lin/h/skerror.h
+++ b/drivers/net/sk98lin/h/skerror.h
diff --git a/drivers/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
index 72ba9ce19..72ba9ce19 100644
--- a/drivers/sk98lin/h/skgedrv.h
+++ b/drivers/net/sk98lin/h/skgedrv.h
diff --git a/drivers/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
index 2c9842767..2c9842767 100644
--- a/drivers/sk98lin/h/skgehw.h
+++ b/drivers/net/sk98lin/h/skgehw.h
diff --git a/drivers/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h
index 8aa9edd71..8aa9edd71 100644
--- a/drivers/sk98lin/h/skgehwt.h
+++ b/drivers/net/sk98lin/h/skgehwt.h
diff --git a/drivers/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
index e639f733c..e639f733c 100644
--- a/drivers/sk98lin/h/skgei2c.h
+++ b/drivers/net/sk98lin/h/skgei2c.h
diff --git a/drivers/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
index cdddef92b..cdddef92b 100644
--- a/drivers/sk98lin/h/skgeinit.h
+++ b/drivers/net/sk98lin/h/skgeinit.h
diff --git a/drivers/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h
index 5c44f4771..5c44f4771 100644
--- a/drivers/sk98lin/h/skgepnm2.h
+++ b/drivers/net/sk98lin/h/skgepnm2.h
diff --git a/drivers/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
index 7532313ba..7532313ba 100644
--- a/drivers/sk98lin/h/skgepnmi.h
+++ b/drivers/net/sk98lin/h/skgepnmi.h
diff --git a/drivers/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h
index fc001b237..fc001b237 100644
--- a/drivers/sk98lin/h/skgesirq.h
+++ b/drivers/net/sk98lin/h/skgesirq.h
diff --git a/drivers/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h
index 5ffaf6ede..5ffaf6ede 100644
--- a/drivers/sk98lin/h/ski2c.h
+++ b/drivers/net/sk98lin/h/ski2c.h
diff --git a/drivers/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h
index bce20a75b..bce20a75b 100644
--- a/drivers/sk98lin/h/skqueue.h
+++ b/drivers/net/sk98lin/h/skqueue.h
diff --git a/drivers/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h
index 04d025b00..04d025b00 100644
--- a/drivers/sk98lin/h/skrlmt.h
+++ b/drivers/net/sk98lin/h/skrlmt.h
diff --git a/drivers/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h
index 36f8ccb6a..36f8ccb6a 100644
--- a/drivers/sk98lin/h/sktimer.h
+++ b/drivers/net/sk98lin/h/sktimer.h
diff --git a/drivers/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h
index e657016e5..e657016e5 100644
--- a/drivers/sk98lin/h/sktypes.h
+++ b/drivers/net/sk98lin/h/sktypes.h
diff --git a/drivers/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h
index ef466857d..ef466857d 100644
--- a/drivers/sk98lin/h/skversion.h
+++ b/drivers/net/sk98lin/h/skversion.h
diff --git a/drivers/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
index 1be34c5a9..1be34c5a9 100644
--- a/drivers/sk98lin/h/skvpd.h
+++ b/drivers/net/sk98lin/h/skvpd.h
diff --git a/drivers/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
index 2ef903a87..2ef903a87 100644
--- a/drivers/sk98lin/h/xmac_ii.h
+++ b/drivers/net/sk98lin/h/xmac_ii.h
diff --git a/drivers/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c
index ed79c049b..ed79c049b 100644
--- a/drivers/sk98lin/skaddr.c
+++ b/drivers/net/sk98lin/skaddr.c
diff --git a/drivers/sk98lin/skcsum.c b/drivers/net/sk98lin/skcsum.c
index a5dc57258..a5dc57258 100644
--- a/drivers/sk98lin/skcsum.c
+++ b/drivers/net/sk98lin/skcsum.c
diff --git a/drivers/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 61a609423..61a609423 100644
--- a/drivers/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
diff --git a/drivers/sk98lin/skgehwt.c b/drivers/net/sk98lin/skgehwt.c
index f8681a8b0..f8681a8b0 100644
--- a/drivers/sk98lin/skgehwt.c
+++ b/drivers/net/sk98lin/skgehwt.c
diff --git a/drivers/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index a18dc0a48..a18dc0a48 100644
--- a/drivers/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
diff --git a/drivers/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c
index 4a9e9e6af..4a9e9e6af 100644
--- a/drivers/sk98lin/skgemib.c
+++ b/drivers/net/sk98lin/skgemib.c
diff --git a/drivers/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index b5d32b04c..b5d32b04c 100644
--- a/drivers/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
diff --git a/drivers/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c
index e5a4f7ec1..e5a4f7ec1 100644
--- a/drivers/sk98lin/skgesirq.c
+++ b/drivers/net/sk98lin/skgesirq.c
diff --git a/drivers/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c
index 2ab635a22..2ab635a22 100644
--- a/drivers/sk98lin/ski2c.c
+++ b/drivers/net/sk98lin/ski2c.c
diff --git a/drivers/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
index 687572b1d..687572b1d 100644
--- a/drivers/sk98lin/sklm80.c
+++ b/drivers/net/sk98lin/sklm80.c
diff --git a/drivers/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c
index 4e340730e..4e340730e 100644
--- a/drivers/sk98lin/skproc.c
+++ b/drivers/net/sk98lin/skproc.c
diff --git a/drivers/sk98lin/skqueue.c b/drivers/net/sk98lin/skqueue.c
index c49baed4f..c49baed4f 100644
--- a/drivers/sk98lin/skqueue.c
+++ b/drivers/net/sk98lin/skqueue.c
diff --git a/drivers/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c
index f8a3b41f0..f8a3b41f0 100644
--- a/drivers/sk98lin/skrlmt.c
+++ b/drivers/net/sk98lin/skrlmt.c
diff --git a/drivers/sk98lin/sktimer.c b/drivers/net/sk98lin/sktimer.c
index 37cd4c9fe..37cd4c9fe 100644
--- a/drivers/sk98lin/sktimer.c
+++ b/drivers/net/sk98lin/sktimer.c
diff --git a/drivers/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c
index 3b81e67df..3b81e67df 100644
--- a/drivers/sk98lin/skvpd.c
+++ b/drivers/net/sk98lin/skvpd.c
diff --git a/drivers/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index e6b5a95d4..e6b5a95d4 100644
--- a/drivers/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
diff --git a/drivers/sk98lin/u-boot_compat.h b/drivers/net/sk98lin/u-boot_compat.h
index 1e385f8ef..1e385f8ef 100644
--- a/drivers/sk98lin/u-boot_compat.h
+++ b/drivers/net/sk98lin/u-boot_compat.h
diff --git a/drivers/sk98lin/uboot_drv.c b/drivers/net/sk98lin/uboot_drv.c
index d02cd1be2..d02cd1be2 100644
--- a/drivers/sk98lin/uboot_drv.c
+++ b/drivers/net/sk98lin/uboot_drv.c
diff --git a/drivers/sk98lin/uboot_skb.c b/drivers/net/sk98lin/uboot_skb.c
index 3a487a8e3..3a487a8e3 100644
--- a/drivers/sk98lin/uboot_skb.c
+++ b/drivers/net/sk98lin/uboot_skb.c
diff --git a/drivers/smc91111.c b/drivers/net/smc91111.c
index 8061f1297..8061f1297 100644
--- a/drivers/smc91111.c
+++ b/drivers/net/smc91111.c
diff --git a/drivers/smc91111.h b/drivers/net/smc91111.h
index d03cbc320..d03cbc320 100644
--- a/drivers/smc91111.h
+++ b/drivers/net/smc91111.h
diff --git a/drivers/tigon3.c b/drivers/net/tigon3.c
index 5f6a4ecd0..5f6a4ecd0 100644
--- a/drivers/tigon3.c
+++ b/drivers/net/tigon3.c
diff --git a/drivers/tigon3.h b/drivers/net/tigon3.h
index c03347fdc..c03347fdc 100644
--- a/drivers/tigon3.h
+++ b/drivers/net/tigon3.h
diff --git a/drivers/tsec.c b/drivers/net/tsec.c
index 7ba8f0cac..ca6284b72 100644
--- a/drivers/tsec.c
+++ b/drivers/net/tsec.c
@@ -117,10 +117,13 @@ struct phy_info *get_phy_info(struct eth_device *dev);
 void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
 static void adjust_link(struct eth_device *dev);
 static void relocate_cmds(void);
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
 static int tsec_miiphy_write(char *devname, unsigned char addr,
 			     unsigned char reg, unsigned short value);
 static int tsec_miiphy_read(char *devname, unsigned char addr,
 			    unsigned char reg, unsigned short *value);
+#endif
 #ifdef CONFIG_MCAST_TFTP
 static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set);
 #endif
diff --git a/drivers/tsec.h b/drivers/net/tsec.h
index 2f0092ad5..2f0092ad5 100644
--- a/drivers/tsec.h
+++ b/drivers/net/tsec.h
diff --git a/drivers/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 524e9daa4..524e9daa4 100644
--- a/drivers/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
new file mode 100644
index 000000000..1267c5798
--- /dev/null
+++ b/drivers/net/uli526x.c
@@ -0,0 +1,996 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Roy Zang <tie-fei.zang@freescale.com>, Sep, 2007
+ *
+ * Description:
+ * ULI 526x Ethernet port driver.
+ * Based on the Linux driver: drivers/net/tulip/uli526x.c
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of  the GNU General  Public License as published by
+ * the Free Software Foundation;  either version 2 of the  License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <miiphy.h>
+
+/* some kernel function compatible define */
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+	defined(CONFIG_ULI526X)
+
+#undef DEBUG
+
+/* Board/System/Debug information/definition */
+#define ULI_VENDOR_ID		0x10B9
+#define ULI5261_DEVICE_ID	0x5261
+#define ULI5263_DEVICE_ID	0x5263
+/* ULi M5261 ID*/
+#define PCI_ULI5261_ID		ULI5261_DEVICE_ID << 16 | ULI_VENDOR_ID
+/* ULi M5263 ID*/
+#define PCI_ULI5263_ID		ULI5263_DEVICE_ID << 16 | ULI_VENDOR_ID
+
+#define ULI526X_IO_SIZE	0x100
+#define TX_DESC_CNT	0x10		/* Allocated Tx descriptors */
+#define RX_DESC_CNT	PKTBUFSRX	/* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT	(TX_DESC_CNT - 2) /* Max TX packet count */
+#define TX_WAKE_DESC_CNT	(TX_DESC_CNT - 3) /* TX wakeup count */
+#define DESC_ALL_CNT		(TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC		0x300
+#define RX_ALLOC_SIZE		PKTSIZE
+#define ULI526X_RESET		1
+#define CR0_DEFAULT		0
+#define CR6_DEFAULT		0x22200000
+#define CR7_DEFAULT		0x180c1
+#define CR15_DEFAULT		0x06		/* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK		0x4302		/* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE		1514
+#define ULI5261_MAX_MULTICAST	14
+#define RX_COPY_SIZE		100
+#define MAX_CHECK_PACKET	0x8000
+
+#define ULI526X_10MHF		0
+#define ULI526X_100MHF		1
+#define ULI526X_10MFD		4
+#define ULI526X_100MFD		5
+#define ULI526X_AUTO		8
+
+#define ULI526X_TXTH_72		0x400000	/* TX TH 72 byte */
+#define ULI526X_TXTH_96		0x404000	/* TX TH 96 byte */
+#define ULI526X_TXTH_128	0x0000		/* TX TH 128 byte */
+#define ULI526X_TXTH_256	0x4000		/* TX TH 256 byte */
+#define ULI526X_TXTH_512	0x8000		/* TX TH 512 byte */
+#define ULI526X_TXTH_1K		0xC000		/* TX TH 1K  byte */
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ		0x4800
+#define CR9_SRCS		0x1
+#define CR9_SRCLK		0x2
+#define CR9_CRDOUT		0x8
+#define SROM_DATA_0		0x0
+#define SROM_DATA_1		0x4
+#define PHY_DATA_1		0x20000
+#define PHY_DATA_0		0x00000
+#define MDCLKH			0x10000
+
+#define PHY_POWER_DOWN	0x800
+
+#define SROM_V41_CODE		0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) do {			\
+	outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr);		\
+	udelay(5);						\
+	outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK, ioaddr);	\
+	udelay(5);						\
+	outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr);		\
+	udelay(5);						\
+	} while (0)
+
+/* Structure/enum declaration */
+
+struct tx_desc {
+	u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+	char *tx_buf_ptr;		/* Data for us */
+	struct tx_desc *next_tx_desc;
+};
+
+struct rx_desc {
+	u32 rdes0, rdes1, rdes2, rdes3;	/* Data for the card */
+	char *rx_buf_ptr;		/* Data for us */
+	struct rx_desc *next_rx_desc;
+};
+
+struct uli526x_board_info {
+	u32 chip_id;	/* Chip vendor/Device ID */
+	pci_dev_t pdev;
+
+	long ioaddr;			/* I/O base address */
+	u32 cr0_data;
+	u32 cr5_data;
+	u32 cr6_data;
+	u32 cr7_data;
+	u32 cr15_data;
+
+	/* pointer for memory physical address */
+	dma_addr_t buf_pool_dma_ptr;	/* Tx buffer pool memory */
+	dma_addr_t buf_pool_dma_start;	/* Tx buffer pool align dword */
+	dma_addr_t desc_pool_dma_ptr;	/* descriptor pool memory */
+	dma_addr_t first_tx_desc_dma;
+	dma_addr_t first_rx_desc_dma;
+
+	/* descriptor pointer */
+	unsigned char *buf_pool_ptr;	/* Tx buffer pool memory */
+	unsigned char *buf_pool_start;	/* Tx buffer pool align dword */
+	unsigned char *desc_pool_ptr;	/* descriptor pool memory */
+	struct tx_desc *first_tx_desc;
+	struct tx_desc *tx_insert_ptr;
+	struct tx_desc *tx_remove_ptr;
+	struct rx_desc *first_rx_desc;
+	struct rx_desc *rx_ready_ptr;	/* packet come pointer */
+	unsigned long tx_packet_cnt;	/* transmitted packet count */
+
+	u16 PHY_reg4;			/* Saved Phyxcer register 4 value */
+
+	u8 media_mode;			/* user specify media mode */
+	u8 op_mode;			/* real work dedia mode */
+	u8 phy_addr;
+
+	/* NIC SROM data */
+	unsigned char srom[128];
+};
+
+enum uli526x_offsets {
+	DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+	DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+	DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+	DCR15 = 0x78
+};
+
+enum uli526x_CR6_bits {
+	CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+	CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+	CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration -- */
+
+static unsigned char uli526x_media_mode = ULI526X_AUTO;
+
+static struct tx_desc desc_pool_array[DESC_ALL_CNT + 0x20]
+	__attribute__ ((aligned(32)));
+static char buf_pool[TX_BUF_ALLOC * TX_DESC_CNT + 4];
+
+/* For module input parameter */
+static int mode = 8;
+
+/* function declaration -- */
+static int uli526x_start_xmit(struct eth_device *dev,
+				volatile void *packet, int length);
+static const struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long, int);
+static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
+static void allocate_rx_buffer(struct uli526x_board_info *);
+static void update_cr6(u32, unsigned long);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 phy_readby_cr10(unsigned long, u8, u8);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_writeby_cr10(unsigned long, u8, u8, u16);
+static void phy_write_1bit(unsigned long, u32, u32);
+static u16 phy_read_1bit(unsigned long, u32);
+static int uli526x_rx_packet(struct eth_device *);
+static void uli526x_free_tx_pkt(struct eth_device *,
+		struct uli526x_board_info *);
+static void uli526x_reuse_buf(struct rx_desc *);
+static void uli526x_init(struct eth_device *);
+static void uli526x_set_phyxcer(struct uli526x_board_info *);
+
+
+static int uli526x_init_one(struct eth_device *, bd_t *);
+static void uli526x_disable(struct eth_device *);
+static void set_mac_addr(struct eth_device *);
+
+static struct pci_device_id uli526x_pci_tbl[] = {
+	{ ULI_VENDOR_ID, ULI5261_DEVICE_ID}, /* 5261 device */
+	{ ULI_VENDOR_ID, ULI5263_DEVICE_ID}, /* 5263 device */
+	{}
+};
+
+/* ULI526X network board routine */
+
+/*
+ *	Search ULI526X board, register it
+ */
+
+int uli526x_initialize(bd_t *bis)
+{
+	pci_dev_t devno;
+	int card_number = 0;
+	struct eth_device *dev;
+	struct uli526x_board_info *db;	/* board information structure */
+
+	u32 iobase;
+	int idx = 0;
+
+	while (1) {
+		/* Find PCI device */
+		devno = pci_find_devices(uli526x_pci_tbl, idx++);
+		if (devno < 0)
+			break;
+
+		pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+		iobase &= ~0xf;
+
+		dev = (struct eth_device *)malloc(sizeof *dev);
+		sprintf(dev->name, "uli526x#%d\n", card_number);
+		db = (struct uli526x_board_info *)
+			malloc(sizeof(struct uli526x_board_info));
+
+		dev->priv = db;
+		db->pdev = devno;
+		dev->iobase = iobase;
+
+		dev->init = uli526x_init_one;
+		dev->halt = uli526x_disable;
+		dev->send = uli526x_start_xmit;
+		dev->recv = uli526x_rx_packet;
+
+		/* init db */
+		db->ioaddr = dev->iobase;
+		/* get chip id */
+
+		pci_read_config_dword(devno, PCI_VENDOR_ID, &db->chip_id);
+#ifdef DEBUG
+		printf("uli526x: uli526x @0x%x\n", iobase);
+		printf("uli526x: chip_id%x\n", db->chip_id);
+#endif
+		eth_register(dev);
+		card_number++;
+		pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
+		udelay(10 * 1000);
+	}
+	return card_number;
+}
+
+static int uli526x_init_one(struct eth_device *dev, bd_t *bis)
+{
+
+	struct uli526x_board_info *db = dev->priv;
+	int i;
+
+	switch (mode) {
+	case ULI526X_10MHF:
+	case ULI526X_100MHF:
+	case ULI526X_10MFD:
+	case ULI526X_100MFD:
+		uli526x_media_mode = mode;
+		break;
+	default:
+		uli526x_media_mode = ULI526X_AUTO;
+		break;
+	}
+
+	/* Allocate Tx/Rx descriptor memory */
+	db->desc_pool_ptr = (uchar *)&desc_pool_array[0];
+	db->desc_pool_dma_ptr = (dma_addr_t)&desc_pool_array[0];
+	if (db->desc_pool_ptr == NULL)
+		return 0;
+
+	db->buf_pool_ptr = &buf_pool[0];
+	db->buf_pool_dma_ptr = (dma_addr_t)&buf_pool[0];
+	if (db->buf_pool_ptr == NULL)
+		return 0;
+
+	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+
+	db->buf_pool_start = db->buf_pool_ptr;
+	db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+#ifdef DEBUG
+	printf("%s(): db->ioaddr= 0x%x\n",
+		__FUNCTION__, db->ioaddr);
+	printf("%s(): media_mode= 0x%x\n",
+		__FUNCTION__, uli526x_media_mode);
+	printf("%s(): db->desc_pool_ptr= 0x%x\n",
+		__FUNCTION__, db->desc_pool_ptr);
+	printf("%s(): db->desc_pool_dma_ptr= 0x%x\n",
+		__FUNCTION__, db->desc_pool_dma_ptr);
+	printf("%s(): db->buf_pool_ptr= 0x%x\n",
+		__FUNCTION__, db->buf_pool_ptr);
+	printf("%s(): db->buf_pool_dma_ptr= 0x%x\n",
+		__FUNCTION__, db->buf_pool_dma_ptr);
+#endif
+
+	/* read 64 word srom data */
+	for (i = 0; i < 64; i++)
+		((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr,
+			i));
+
+	/* Set Node address */
+	if (((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0)
+	/* SROM absent, so write MAC address to ID Table */
+		set_mac_addr(dev);
+	else {		/*Exist SROM*/
+		for (i = 0; i < 6; i++)
+			dev->enetaddr[i] = db->srom[20 + i];
+	}
+#ifdef DEBUG
+	for (i = 0; i < 6; i++)
+		printf("%c%02x", i ? ':' : ' ', dev->enetaddr[i]);
+#endif
+	db->PHY_reg4 = 0x1e0;
+
+	/* system variable init */
+	db->cr6_data = CR6_DEFAULT ;
+	db->cr6_data |= ULI526X_TXTH_256;
+	db->cr0_data = CR0_DEFAULT;
+	uli526x_init(dev);
+	return 1;
+}
+
+static void uli526x_disable(struct eth_device *dev)
+{
+#ifdef DEBUG
+	printf("uli526x_disable\n");
+#endif
+	struct uli526x_board_info *db = dev->priv;
+
+	if (!((inl(db->ioaddr + DCR12)) & 0x8)) {
+		/* Reset & stop ULI526X board */
+		outl(ULI526X_RESET, db->ioaddr + DCR0);
+		udelay(5);
+		phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+		/* reset the board */
+		db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);	/* Disable Tx/Rx */
+		update_cr6(db->cr6_data, dev->iobase);
+		outl(0, dev->iobase + DCR7);		/* Disable Interrupt */
+		outl(inl(dev->iobase + DCR5), dev->iobase + DCR5);
+	}
+}
+
+/*	Initialize ULI526X board
+ *	Reset ULI526X board
+ *	Initialize TX/Rx descriptor chain structure
+ *	Send the set-up frame
+ *	Enable Tx/Rx machine
+ */
+
+static void uli526x_init(struct eth_device *dev)
+{
+
+	struct uli526x_board_info *db = dev->priv;
+	u8	phy_tmp;
+	u16	phy_value;
+	u16 phy_reg_reset;
+
+	/* Reset M526x MAC controller */
+	outl(ULI526X_RESET, db->ioaddr + DCR0);	/* RESET MAC */
+	udelay(100);
+	outl(db->cr0_data, db->ioaddr + DCR0);
+	udelay(5);
+
+	/* Phy addr : In some boards,M5261/M5263 phy address != 1 */
+	db->phy_addr = 1;
+	db->tx_packet_cnt = 0;
+	for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
+		/* peer add */
+		phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
+		if (phy_value != 0xffff && phy_value != 0) {
+			db->phy_addr = phy_tmp;
+			break;
+		}
+	}
+
+#ifdef DEBUG
+	printf("%s(): db->ioaddr= 0x%x\n", __FUNCTION__, db->ioaddr);
+	printf("%s(): db->phy_addr= 0x%x\n", __FUNCTION__, db->phy_addr);
+#endif
+	if (phy_tmp == 32)
+		printf("Can not find the phy address!!!");
+
+	/* Parser SROM and media mode */
+	db->media_mode = uli526x_media_mode;
+
+	if (!(inl(db->ioaddr + DCR12) & 0x8)) {
+		/* Phyxcer capability setting */
+		phy_reg_reset = phy_read(db->ioaddr,
+			db->phy_addr, 0, db->chip_id);
+		phy_reg_reset = (phy_reg_reset | 0x8000);
+		phy_write(db->ioaddr, db->phy_addr, 0,
+			phy_reg_reset, db->chip_id);
+		udelay(500);
+
+		/* Process Phyxcer Media Mode */
+		uli526x_set_phyxcer(db);
+	}
+	/* Media Mode Process */
+	if (!(db->media_mode & ULI526X_AUTO))
+		db->op_mode = db->media_mode; 	/* Force Mode */
+
+	/* Initialize Transmit/Receive decriptor and CR3/4 */
+	uli526x_descriptor_init(db, db->ioaddr);
+
+	/* Init CR6 to program M526X operation */
+	update_cr6(db->cr6_data, db->ioaddr);
+
+	/* Init CR7, interrupt active bit */
+	db->cr7_data = CR7_DEFAULT;
+	outl(db->cr7_data, db->ioaddr + DCR7);
+
+	/* Init CR15, Tx jabber and Rx watchdog timer */
+	outl(db->cr15_data, db->ioaddr + DCR15);
+
+	/* Enable ULI526X Tx/Rx function */
+	db->cr6_data |= CR6_RXSC | CR6_TXSC;
+	update_cr6(db->cr6_data, db->ioaddr);
+	while (!(inl(db->ioaddr + DCR12) & 0x8))
+		udelay(10);
+}
+
+/*
+ *	Hardware start transmission.
+ *	Send a packet to media from the upper layer.
+ */
+
+static int uli526x_start_xmit(struct eth_device *dev,
+				volatile void *packet, int length)
+{
+	struct uli526x_board_info *db = dev->priv;
+	struct tx_desc *txptr;
+	unsigned int len = length;
+	/* Too large packet check */
+	if (len > MAX_PACKET_SIZE) {
+		printf(": big packet = %d\n", len);
+		return 0;
+	}
+
+	/* No Tx resource check, it never happen nromally */
+	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
+		printf("No Tx resource %ld\n", db->tx_packet_cnt);
+		return 0;
+	}
+
+	/* Disable NIC interrupt */
+	outl(0, dev->iobase + DCR7);
+
+	/* transmit this packet */
+	txptr = db->tx_insert_ptr;
+	memcpy((char *)txptr->tx_buf_ptr, (char *)packet, (int)length);
+	txptr->tdes1 = cpu_to_le32(0xe1000000 | length);
+
+	/* Point to next transmit free descriptor */
+	db->tx_insert_ptr = txptr->next_tx_desc;
+
+	/* Transmit Packet Process */
+	if ((db->tx_packet_cnt < TX_DESC_CNT)) {
+		txptr->tdes0 = cpu_to_le32(0x80000000);	/* Set owner bit */
+		db->tx_packet_cnt++;			/* Ready to send */
+		outl(0x1, dev->iobase + DCR1);	/* Issue Tx polling */
+	}
+
+	/* Got ULI526X status */
+	db->cr5_data = inl(db->ioaddr + DCR5);
+	outl(db->cr5_data, db->ioaddr + DCR5);
+
+#ifdef TX_DEBUG
+	printf("%s(): length = 0x%x\n", __FUNCTION__, length);
+	printf("%s(): cr5_data=%x\n", __FUNCTION__, db->cr5_data);
+#endif
+
+	outl(db->cr7_data, dev->iobase + DCR7);
+	uli526x_free_tx_pkt(dev, db);
+
+	return length;
+}
+
+/*
+ *	Free TX resource after TX complete
+ */
+
+static void uli526x_free_tx_pkt(struct eth_device *dev,
+	struct uli526x_board_info *db)
+{
+	struct tx_desc *txptr;
+	u32 tdes0;
+
+	txptr = db->tx_remove_ptr;
+	while (db->tx_packet_cnt) {
+		tdes0 = le32_to_cpu(txptr->tdes0);
+		/* printf(DRV_NAME ": tdes0=%x\n", tdes0); */
+		if (tdes0 & 0x80000000)
+			break;
+
+		/* A packet sent completed */
+		db->tx_packet_cnt--;
+
+		if (tdes0 != 0x7fffffff) {
+#ifdef TX_DEBUG
+			printf("%s()tdes0=%x\n", __FUNCTION__, tdes0);
+#endif
+			if (tdes0 & TDES0_ERR_MASK) {
+				if (tdes0 & 0x0002) {	/* UnderRun */
+					if (!(db->cr6_data & CR6_SFT)) {
+						db->cr6_data = db->cr6_data |
+							CR6_SFT;
+						update_cr6(db->cr6_data,
+							db->ioaddr);
+					}
+				}
+			}
+		}
+
+		txptr = txptr->next_tx_desc;
+	}/* End of while */
+
+	/* Update TX remove pointer to next */
+	db->tx_remove_ptr = txptr;
+}
+
+
+/*
+ *	Receive the come packet and pass to upper layer
+ */
+
+static int uli526x_rx_packet(struct eth_device *dev)
+{
+	struct uli526x_board_info *db = dev->priv;
+	struct rx_desc *rxptr;
+	int rxlen = 0;
+	u32 rdes0;
+
+	rxptr = db->rx_ready_ptr;
+
+	rdes0 = le32_to_cpu(rxptr->rdes0);
+#ifdef RX_DEBUG
+	printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0);
+#endif
+	if (!(rdes0 & 0x80000000)) {	/* packet owner check */
+		if ((rdes0 & 0x300) != 0x300) {
+			/* A packet without First/Last flag */
+			/* reuse this buf */
+			printf("A packet without First/Last flag");
+			uli526x_reuse_buf(rxptr);
+		} else {
+			/* A packet with First/Last flag */
+			rxlen = ((rdes0 >> 16) & 0x3fff) - 4;
+#ifdef RX_DEBUG
+			printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen);
+#endif
+			/* error summary bit check */
+			if (rdes0 & 0x8000) {
+				/* This is a error packet */
+				printf("Eroor: rdes0: %lx\n", rdes0);
+			}
+
+			if (!(rdes0 & 0x8000) ||
+				((db->cr6_data & CR6_PM) && (rxlen > 6))) {
+
+#ifdef RX_DEBUG
+				printf("%s(): rx_skb_ptr =%x\n",
+					__FUNCTION__, rxptr->rx_buf_ptr);
+				printf("%s(): rxlen =%x\n",
+					__FUNCTION__, rxlen);
+
+				printf("%s(): buf addr =%x\n",
+					__FUNCTION__, rxptr->rx_buf_ptr);
+				printf("%s(): rxlen =%x\n",
+					__FUNCTION__, rxlen);
+				int i;
+				for (i = 0; i < 0x20; i++)
+					printf("%s(): data[%x] =%x\n",
+					__FUNCTION__, i, rxptr->rx_buf_ptr[i]);
+#endif
+
+				NetReceive(rxptr->rx_buf_ptr, rxlen);
+				uli526x_reuse_buf(rxptr);
+
+			} else {
+				/* Reuse SKB buffer when the packet is error */
+				printf("Reuse buffer, rdes0");
+				uli526x_reuse_buf(rxptr);
+			}
+		}
+
+		rxptr = rxptr->next_rx_desc;
+	}
+
+	db->rx_ready_ptr = rxptr;
+	return rxlen;
+}
+
+/*
+ *	Reuse the RX buffer
+ */
+
+static void uli526x_reuse_buf(struct rx_desc *rxptr)
+{
+
+	if (!(rxptr->rdes0 & cpu_to_le32(0x80000000)))
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+	else
+		printf("Buffer reuse method error");
+}
+/*
+ *	Initialize transmit/Receive descriptor
+ *	Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void uli526x_descriptor_init(struct uli526x_board_info *db,
+	unsigned long ioaddr)
+{
+	struct tx_desc *tmp_tx;
+	struct rx_desc *tmp_rx;
+	unsigned char *tmp_buf;
+	dma_addr_t tmp_tx_dma, tmp_rx_dma;
+	dma_addr_t tmp_buf_dma;
+	int i;
+	/* tx descriptor start pointer */
+	db->tx_insert_ptr = db->first_tx_desc;
+	db->tx_remove_ptr = db->first_tx_desc;
+
+	outl(db->first_tx_desc_dma, ioaddr + DCR4);     /* TX DESC address */
+
+	/* rx descriptor start pointer */
+	db->first_rx_desc = (void *)db->first_tx_desc +
+		sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->first_rx_desc_dma =  db->first_tx_desc_dma +
+		sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->rx_ready_ptr = db->first_rx_desc;
+	outl(db->first_rx_desc_dma, ioaddr + DCR3);	/* RX DESC address */
+#ifdef DEBUG
+	printf("%s(): db->first_tx_desc= 0x%x\n",
+		__FUNCTION__, db->first_tx_desc);
+	printf("%s(): db->first_rx_desc_dma= 0x%x\n",
+		__FUNCTION__, db->first_rx_desc_dma);
+#endif
+	/* Init Transmit chain */
+	tmp_buf = db->buf_pool_start;
+	tmp_buf_dma = db->buf_pool_dma_start;
+	tmp_tx_dma = db->first_tx_desc_dma;
+	for (tmp_tx = db->first_tx_desc, i = 0;
+			i < TX_DESC_CNT; i++, tmp_tx++) {
+		tmp_tx->tx_buf_ptr = tmp_buf;
+		tmp_tx->tdes0 = cpu_to_le32(0);
+		tmp_tx->tdes1 = cpu_to_le32(0x81000000);	/* IC, chain */
+		tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+		tmp_tx_dma += sizeof(struct tx_desc);
+		tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+		tmp_tx->next_tx_desc = tmp_tx + 1;
+		tmp_buf = tmp_buf + TX_BUF_ALLOC;
+		tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+	}
+	(--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+	tmp_tx->next_tx_desc = db->first_tx_desc;
+
+	 /* Init Receive descriptor chain */
+	tmp_rx_dma = db->first_rx_desc_dma;
+	for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT;
+			i++, tmp_rx++) {
+		tmp_rx->rdes0 = cpu_to_le32(0);
+		tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+		tmp_rx_dma += sizeof(struct rx_desc);
+		tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+		tmp_rx->next_rx_desc = tmp_rx + 1;
+	}
+	(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+	tmp_rx->next_rx_desc = db->first_rx_desc;
+
+	/* pre-allocate Rx buffer */
+	allocate_rx_buffer(db);
+}
+
+/*
+ *	Update CR6 value
+ *	Firstly stop ULI526X, then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+
+	outl(cr6_data, ioaddr + DCR6);
+	udelay(5);
+}
+
+/*
+ *	Allocate rx buffer,
+ */
+
+static void allocate_rx_buffer(struct uli526x_board_info *db)
+{
+	int index;
+	struct rx_desc *rxptr;
+	rxptr = db->first_rx_desc;
+	u32 addr;
+
+	for (index = 0; index < RX_DESC_CNT; index++) {
+		addr = (u32)NetRxPackets[index];
+		addr += (16 - (addr & 15));
+		rxptr->rx_buf_ptr = (char *) addr;
+		rxptr->rdes2 = cpu_to_le32(addr);
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+#ifdef DEBUG
+		printf("%s(): Number 0x%x:\n", __FUNCTION__, index);
+		printf("%s(): addr 0x%x:\n", __FUNCTION__, addr);
+		printf("%s(): rxptr address = 0x%x\n", __FUNCTION__, rxptr);
+		printf("%s(): rxptr buf address = 0x%x\n", \
+			__FUNCTION__, rxptr->rx_buf_ptr);
+		printf("%s(): rdes2  = 0x%x\n", __FUNCTION__, rxptr->rdes2);
+#endif
+		rxptr = rxptr->next_rx_desc;
+	}
+}
+
+/*
+ *	Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+	int i;
+	u16 srom_data = 0;
+	long cr9_ioaddr = ioaddr + DCR9;
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	/* Send the Read Command 110b */
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+	/* Send the offset */
+	for (i = 5; i >= 0; i--) {
+		srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+		SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+	}
+
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	for (i = 16; i > 0; i--) {
+		outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+		udelay(5);
+		srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT)
+			? 1 : 0);
+		outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+		udelay(5);
+	}
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	return srom_data;
+}
+
+/*
+ *	Set 10/100 phyxcer capability
+ *	AUTO mode : phyxcer register4 is NIC capability
+ *	Force mode: phyxcer register4 is the force media
+ */
+
+static void uli526x_set_phyxcer(struct uli526x_board_info *db)
+{
+	u16 phy_reg;
+
+	/* Phyxcer capability setting */
+	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+	if (db->media_mode & ULI526X_AUTO) {
+		/* AUTO Mode */
+		phy_reg |= db->PHY_reg4;
+	} else {
+		/* Force Mode */
+		switch (db->media_mode) {
+		case ULI526X_10MHF: phy_reg |= 0x20; break;
+		case ULI526X_10MFD: phy_reg |= 0x40; break;
+		case ULI526X_100MHF: phy_reg |= 0x80; break;
+		case ULI526X_100MFD: phy_reg |= 0x100; break;
+		}
+
+	}
+
+	/* Write new capability to Phyxcer Reg4 */
+	if (!(phy_reg & 0x01e0)) {
+		phy_reg |= db->PHY_reg4;
+		db->media_mode |= ULI526X_AUTO;
+	}
+	phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+	/* Restart Auto-Negotiation */
+	phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+	udelay(50);
+}
+
+/*
+ *	Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+	u16 phy_data, u32 chip_id)
+{
+	u16 i;
+	unsigned long ioaddr;
+
+	if (chip_id == PCI_ULI5263_ID) {
+		phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
+		return;
+	}
+	/* M5261/M5263 Chip */
+	ioaddr = iobase + DCR9;
+
+	/* Send 33 synchronization clock to Phy controller */
+	for (i = 0; i < 35; i++)
+		phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send start command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send write command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send Phy address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, phy_addr & i ?
+			PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Send register address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, offset & i ?
+			PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* written trasnition */
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+	/* Write a word data to PHY controller */
+	for (i = 0x8000; i > 0; i >>= 1)
+		phy_write_1bit(ioaddr, phy_data & i ?
+			PHY_DATA_1 : PHY_DATA_0, chip_id);
+}
+
+/*
+ *	Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+	int i;
+	u16 phy_data;
+	unsigned long ioaddr;
+
+	if (chip_id == PCI_ULI5263_ID)
+		return phy_readby_cr10(iobase, phy_addr, offset);
+	/* M5261/M5263 Chip */
+	ioaddr = iobase + DCR9;
+
+	/* Send 33 synchronization clock to Phy controller */
+	for (i = 0; i < 35; i++)
+		phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send start command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send read command(10) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+	/* Send Phy address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, phy_addr & i ?
+			PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Send register address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, offset & i ?
+			PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Skip transition state */
+	phy_read_1bit(ioaddr, chip_id);
+
+	/* read 16bit data */
+	for (phy_data = 0, i = 0; i < 16; i++) {
+		phy_data <<= 1;
+		phy_data |= phy_read_1bit(ioaddr, chip_id);
+	}
+
+	return phy_data;
+}
+
+static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
+{
+	unsigned long ioaddr, cr10_value;
+
+	ioaddr = iobase + DCR10;
+	cr10_value = phy_addr;
+	cr10_value = (cr10_value<<5) + offset;
+	cr10_value = (cr10_value<<16) + 0x08000000;
+	outl(cr10_value, ioaddr);
+	udelay(1);
+	while (1) {
+		cr10_value = inl(ioaddr);
+		if (cr10_value & 0x10000000)
+			break;
+	}
+	return (cr10_value&0x0ffff);
+}
+
+static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr,
+	u8 offset, u16 phy_data)
+{
+	unsigned long ioaddr, cr10_value;
+
+	ioaddr = iobase + DCR10;
+	cr10_value = phy_addr;
+	cr10_value = (cr10_value<<5) + offset;
+	cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
+	outl(cr10_value, ioaddr);
+	udelay(1);
+}
+/*
+ *	Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
+{
+	outl(phy_data , ioaddr);			/* MII Clock Low */
+	udelay(1);
+	outl(phy_data  | MDCLKH, ioaddr);	/* MII Clock High */
+	udelay(1);
+	outl(phy_data , ioaddr);			/* MII Clock Low */
+	udelay(1);
+}
+
+/*
+ *	Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
+{
+	u16 phy_data;
+
+	outl(0x50000 , ioaddr);
+	udelay(1);
+	phy_data = (inl(ioaddr) >> 19) & 0x1;
+	outl(0x40000 , ioaddr);
+	udelay(1);
+
+	return phy_data;
+}
+
+/*
+ * Set MAC address to ID Table
+ */
+
+static void set_mac_addr(struct eth_device *dev)
+{
+	int i;
+	u16 addr;
+	struct uli526x_board_info *db = dev->priv;
+	outl(0x10000, db->ioaddr + DCR0);	/* Diagnosis mode */
+	/* Reset dianostic pointer port */
+	outl(0x1c0, db->ioaddr + DCR13);
+	outl(0, db->ioaddr + DCR14);	/* Clear reset port */
+	outl(0x10, db->ioaddr + DCR14);	/* Reset ID Table pointer */
+	outl(0, db->ioaddr + DCR14);	/* Clear reset port */
+	outl(0, db->ioaddr + DCR13);	/* Clear CR13 */
+	/* Select ID Table access port */
+	outl(0x1b0, db->ioaddr + DCR13);
+	/* Read MAC address from CR14 */
+	for (i = 0; i < 3; i++) {
+		addr = dev->enetaddr[2 * i] | (dev->enetaddr[2 * i + 1] << 8);
+		outl(addr, db->ioaddr + DCR14);
+	}
+	/* write end */
+	outl(0, db->ioaddr + DCR13);	/* Clear CR13 */
+	outl(0, db->ioaddr + DCR0);	/* Clear CR0 */
+	udelay(10);
+	return;
+}
+#endif
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
new file mode 100644
index 000000000..fe4583946
--- /dev/null
+++ b/drivers/pci/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libpci.a
+
+COBJS-y += fsl_pci_init.o
+COBJS-y += pci.o
+COBJS-y += pci_auto.o
+COBJS-y += pci_indirect.o
+COBJS-y += tsi108_pci.o
+COBJS-y += w83c553f.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 1e778844a..68e45e17b 100644
--- a/drivers/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -112,6 +112,29 @@ fsl_pci_init(struct pci_controller *hose)
 		pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm);
 		enabled = ltssm >= PCI_LTSSM_L0;
 
+#ifdef CONFIG_FSL_PCIE_RESET
+		if (ltssm == 1) {
+			int i;
+			debug("....PCIe link error. "
+			      "LTSSM=0x%02x.", ltssm);
+			pci->pdb_stat |= 0x08000000; /* assert PCIe reset */
+			temp32 = pci->pdb_stat;
+			udelay(100);
+			debug("  Asserting PCIe reset @%x = %x\n",
+			      &pci->pdb_stat, pci->pdb_stat);
+			pci->pdb_stat &= ~0x08000000; /* clear reset */
+			asm("sync;isync");
+			for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
+				pci_hose_read_config_word(hose, dev, PCI_LTSSM,
+							&ltssm);
+				udelay(1000);
+				debug("....PCIe link error. "
+				      "LTSSM=0x%02x.\n", ltssm);
+			}
+			enabled = ltssm >= PCI_LTSSM_L0;
+		}
+#endif
+
 		if (!enabled) {
 			debug("....PCIE link error.  Skipping scan."
 			      "LTSSM=0x%02x\n", ltssm);
diff --git a/drivers/pci.c b/drivers/pci/pci.c
index 50ca6b0ba..50ca6b0ba 100644
--- a/drivers/pci.c
+++ b/drivers/pci/pci.c
diff --git a/drivers/pci_auto.c b/drivers/pci/pci_auto.c
index acfda83ba..acfda83ba 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci/pci_auto.c
diff --git a/drivers/pci_indirect.c b/drivers/pci/pci_indirect.c
index a8220fb41..a8220fb41 100644
--- a/drivers/pci_indirect.c
+++ b/drivers/pci/pci_indirect.c
diff --git a/drivers/tsi108_pci.c b/drivers/pci/tsi108_pci.c
index 9f606df51..d5f11e42f 100644
--- a/drivers/tsi108_pci.c
+++ b/drivers/pci/tsi108_pci.c
@@ -33,6 +33,9 @@
 #include <pci.h>
 #include <asm/io.h>
 #include <tsi108.h>
+#ifdef CONFIG_OF_FLAT_TREE
+#include <ft_build.h>
+#endif
 
 struct pci_controller local_hose;
 
diff --git a/drivers/w83c553f.c b/drivers/pci/w83c553f.c
index 5d82ed4dd..5d82ed4dd 100644
--- a/drivers/w83c553f.c
+++ b/drivers/pci/w83c553f.c
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
new file mode 100644
index 000000000..bba1ab851
--- /dev/null
+++ b/drivers/pcmcia/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libpcmcia.a
+
+COBJS-y += mpc8xx_pcmcia.o
+COBJS-y += pxa_pcmcia.o
+COBJS-y += rpx_pcmcia.o
+COBJS-y += ti_pci1410a.o
+COBJS-y += tqm8xx_pcmcia.o
+COBJS-y += marubun_pcmcia.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/i82365.c b/drivers/pcmcia/i82365.c
index a40fcf41c..a40fcf41c 100644
--- a/drivers/i82365.c
+++ b/drivers/pcmcia/i82365.c
diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c
new file mode 100644
index 000000000..7b112af92
--- /dev/null
+++ b/drivers/pcmcia/marubun_pcmcia.c
@@ -0,0 +1,113 @@
+/*
+ * Marubun MR-SHPC-01 PCMCIA controller device driver
+ *
+ * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <config.h>
+#include <pcmcia.h>
+#include <asm/io.h>
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	defined(CONFIG_PCMCIA)  \
+	        && (defined(CONFIG_MARUBUN_PCCARD))
+
+/* MR-SHPC-01 register */
+#define MRSHPC_MODE   	(CFG_MARUBUN_MRSHPC + 4)
+#define MRSHPC_OPTION   (CFG_MARUBUN_MRSHPC + 6)
+#define MRSHPC_CSR      (CFG_MARUBUN_MRSHPC + 8)
+#define MRSHPC_ISR      (CFG_MARUBUN_MRSHPC + 10)
+#define MRSHPC_ICR      (CFG_MARUBUN_MRSHPC + 12)
+#define MRSHPC_CPWCR    (CFG_MARUBUN_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (CFG_MARUBUN_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (CFG_MARUBUN_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (CFG_MARUBUN_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (CFG_MARUBUN_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (CFG_MARUBUN_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (CFG_MARUBUN_MRSHPC + 26)
+#define MRSHPC_CDCR     (CFG_MARUBUN_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (CFG_MARUBUN_MRSHPC + 30)
+
+int pcmcia_on (void)
+{
+	printf("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	/* Init */
+	outw( 0x0000 , MRSHPC_MODE );
+
+	if ((inw(MRSHPC_CSR) & 0x000c) == 0){	/* if card detect is true */
+		if ((inw(MRSHPC_CSR) & 0x0080) == 0){
+			outw(0x0674 ,MRSHPC_CPWCR);  /* Card Vcc is 3.3v? */
+		}else{
+			outw(0x0678 ,MRSHPC_CPWCR);  /* Card Vcc is 5V */
+		}
+		udelay( 100000 );   /* wait for power on */
+	}else{
+		return 1;
+	}
+	/*
+	 *	PC-Card window open
+	 *	flag == COMMON/ATTRIBUTE/IO
+	 */
+	/* common window open */
+	outw(0x8a84,MRSHPC_MW0CR1); /* window 0xb8400000 */
+	if ((inw(MRSHPC_CSR) & 0x4000) != 0)
+		outw(0x0b00,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 1 */
+	else
+		outw(0x0300,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 0 */
+
+	/* attribute window open */
+	outw(0x8a85,MRSHPC_MW1CR1); /* window 0xb8500000 */
+	if ((inw(MRSHPC_CSR) & 0x4000) != 0)
+		outw(0x0a00,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 1 */
+	else
+		outw(0x0200,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 0 */
+
+	/* I/O window open */
+	outw(0x8a86,MRSHPC_IOWCR1); /* I/O window 0xb8600000 */
+	outw(0x0008,MRSHPC_CDCR);   /* I/O card mode */
+	if ((inw(MRSHPC_CSR) & 0x4000) != 0)
+		outw(0x0a00,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1 */
+	else
+		outw(0x0200,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0 */
+
+	outw(0x0000,MRSHPC_ISR);
+	outw(0x2000,MRSHPC_ICR);
+	outb(0x00,(CFG_MARUBUN_MW2 + 0x206));
+	outb(0x42,(CFG_MARUBUN_MW2 + 0x200));
+
+	return 0;
+}
+
+int pcmcia_off (void)
+{
+	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	return 0;
+}
+
+#endif /* CONFIG_MARUBUN_PCCARD */
diff --git a/drivers/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 8a34cd305..8a34cd305 100644
--- a/drivers/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
diff --git a/drivers/pxa_pcmcia.c b/drivers/pcmcia/pxa_pcmcia.c
index 6020e4628..6020e4628 100644
--- a/drivers/pxa_pcmcia.c
+++ b/drivers/pcmcia/pxa_pcmcia.c
diff --git a/drivers/rpx_pcmcia.c b/drivers/pcmcia/rpx_pcmcia.c
index c7c425b93..c7c425b93 100644
--- a/drivers/rpx_pcmcia.c
+++ b/drivers/pcmcia/rpx_pcmcia.c
diff --git a/drivers/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c
index 208ca50a7..208ca50a7 100644
--- a/drivers/ti_pci1410a.c
+++ b/drivers/pcmcia/ti_pci1410a.c
diff --git a/drivers/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c
index 132c7a516..132c7a516 100644
--- a/drivers/tqm8xx_pcmcia.c
+++ b/drivers/pcmcia/tqm8xx_pcmcia.c
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
new file mode 100644
index 000000000..e5ee61135
--- /dev/null
+++ b/drivers/rtc/Makefile
@@ -0,0 +1,72 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+#CFLAGS += -DDEBUG
+
+LIB	= $(obj)librtc.a
+
+COBJS-y += date.o
+COBJS-y += bf5xx_rtc.o
+COBJS-y += ds12887.o
+COBJS-y += ds1302.o
+COBJS-y += ds1306.o
+COBJS-y += ds1307.o
+COBJS-y += ds1337.o
+COBJS-y += ds1374.o
+COBJS-y += ds1556.o
+COBJS-y += ds164x.o
+COBJS-y += ds174x.o
+COBJS-y += ds3231.o
+COBJS-y += m41t11.o
+COBJS-y += m41t60.o
+COBJS-y += max6900.o
+COBJS-y += m48t35ax.o
+COBJS-y += mc146818.o
+COBJS-y += mk48t59.o
+COBJS-y += mpc5xxx.o
+COBJS-y += mpc8xx.o
+COBJS-y += pcf8563.o
+COBJS-y += s3c24x0_rtc.o
+COBJS-y += rs5c372.o
+COBJS-y += mcfrtc.o
+COBJS-y += x1205.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/rtc/bf5xx_rtc.c b/drivers/rtc/bf5xx_rtc.c
index 8856bb9b5..8856bb9b5 100644
--- a/rtc/bf5xx_rtc.c
+++ b/drivers/rtc/bf5xx_rtc.c
diff --git a/rtc/date.c b/drivers/rtc/date.c
index a83a7235a..a83a7235a 100644
--- a/rtc/date.c
+++ b/drivers/rtc/date.c
diff --git a/rtc/ds12887.c b/drivers/rtc/ds12887.c
index 84fecf019..84fecf019 100644
--- a/rtc/ds12887.c
+++ b/drivers/rtc/ds12887.c
diff --git a/rtc/ds1302.c b/drivers/rtc/ds1302.c
index 55af1302d..55af1302d 100644
--- a/rtc/ds1302.c
+++ b/drivers/rtc/ds1302.c
diff --git a/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 89e433dab..89e433dab 100644
--- a/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
diff --git a/rtc/ds1307.c b/drivers/rtc/ds1307.c
index c882d7989..c882d7989 100644
--- a/rtc/ds1307.c
+++ b/drivers/rtc/ds1307.c
diff --git a/rtc/ds1337.c b/drivers/rtc/ds1337.c
index c636ac594..c636ac594 100644
--- a/rtc/ds1337.c
+++ b/drivers/rtc/ds1337.c
diff --git a/rtc/ds1374.c b/drivers/rtc/ds1374.c
index e773dd926..e773dd926 100644
--- a/rtc/ds1374.c
+++ b/drivers/rtc/ds1374.c
diff --git a/rtc/ds1556.c b/drivers/rtc/ds1556.c
index 4365cfb98..4365cfb98 100644
--- a/rtc/ds1556.c
+++ b/drivers/rtc/ds1556.c
diff --git a/rtc/ds164x.c b/drivers/rtc/ds164x.c
index bff22b9a0..bff22b9a0 100644
--- a/rtc/ds164x.c
+++ b/drivers/rtc/ds164x.c
diff --git a/rtc/ds174x.c b/drivers/rtc/ds174x.c
index 5f85a6817..5f85a6817 100644
--- a/rtc/ds174x.c
+++ b/drivers/rtc/ds174x.c
diff --git a/rtc/ds3231.c b/drivers/rtc/ds3231.c
index fe11b869f..fe11b869f 100644
--- a/rtc/ds3231.c
+++ b/drivers/rtc/ds3231.c
diff --git a/rtc/m41t11.c b/drivers/rtc/m41t11.c
index 81da33a31..81da33a31 100644
--- a/rtc/m41t11.c
+++ b/drivers/rtc/m41t11.c
diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c
new file mode 100644
index 000000000..7c80143e6
--- /dev/null
+++ b/drivers/rtc/m41t60.c
@@ -0,0 +1,261 @@
+/*
+ * (C) Copyright 2007
+ * Larry Johnson, lrj@acm.org
+ *
+ * based on rtc/m41t11.c which is ...
+ *
+ * (C) Copyright 2002
+ * Andrew May, Viasat Inc, amay@viasat.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * STMicroelectronics M41T60 serial access real-time clock
+ */
+
+/* #define DEBUG 1 */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+#if defined(CONFIG_RTC_M41T60) && defined(CFG_I2C_RTC_ADDR) && \
+	defined(CONFIG_CMD_DATE)
+
+static unsigned bcd2bin(uchar n)
+{
+	return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd(unsigned int n)
+{
+	return (((n / 10) << 4) | (n % 10));
+}
+
+/*
+ * Convert between century and "century bits" (CB1 and CB0).  These routines
+ * assume years are in the range 1900 - 2299.
+ */
+
+static unsigned char year2cb(unsigned const year)
+{
+	if (year < 1900 || year >= 2300)
+		printf("M41T60 RTC: year %d out of range\n", year);
+
+	return (year / 100) & 0x3;
+}
+
+static unsigned cb2year(unsigned const cb)
+{
+	return 1900 + 100 * ((cb + 1) & 0x3);
+}
+
+/*
+ * These are simple defines for the chip local to here so they aren't too
+ * verbose.  DAY/DATE aren't nice but that is how they are on the data sheet.
+ */
+#define RTC_SEC		0x0
+#define RTC_MIN		0x1
+#define RTC_HOUR	0x2
+#define RTC_DAY		0x3
+#define RTC_DATE	0x4
+#define RTC_MONTH	0x5
+#define RTC_YEAR	0x6
+
+#define RTC_REG_CNT	7
+
+#define RTC_CTRL	0x7
+
+#if defined(DEBUG)
+static void rtc_dump(char const *const label)
+{
+	uchar data[8];
+
+	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+		printf("I2C read failed in rtc_dump()\n");
+		return;
+	}
+	printf("RTC dump %s: %02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X\n",
+	       label, data[0], data[1], data[2], data[3],
+	       data[4], data[5], data[6], data[7]);
+}
+#else
+#define rtc_dump(label)
+#endif
+
+static uchar *rtc_validate(void)
+{
+	/*
+	 * This routine uses the OUT bit and the validity of the time values to
+	 * determine whether there has been an initial power-up since the last
+	 * time the routine was run.  It assumes that the OUT bit is not being
+	 * used for any other purpose.
+	 */
+	static const uchar daysInMonth[0x13] = {
+		0x00, 0x31, 0x29, 0x31, 0x30, 0x31, 0x30, 0x31,
+		0x31, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x31, 0x30, 0x31
+	};
+	static uchar data[8];
+	uchar min, date, month, years;
+
+	rtc_dump("begin validate");
+	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+		printf("I2C read failed in rtc_validate()\n");
+		return 0;
+	}
+	/*
+	 * If the OUT bit is "1", there has been a loss of power, so stop the
+	 * oscillator so it can be "kick-started" as per data sheet.
+	 */
+	if (0x00 != (data[RTC_CTRL] & 0x80)) {
+		printf("M41T60 RTC clock lost power.\n");
+		data[RTC_SEC] = 0x80;
+		if (i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) {
+			printf("I2C write failed in rtc_validate()\n");
+			return 0;
+		}
+	}
+	/*
+	 * If the oscillator is stopped or the date is invalid, then reset the
+	 * OUT bit to "0", reset the date registers, and start the oscillator.
+	 */
+	min = data[RTC_MIN] & 0x7F;
+	date = data[RTC_DATE];
+	month = data[RTC_MONTH] & 0x3F;
+	years = data[RTC_YEAR];
+	if (0x59 < data[RTC_SEC] || 0x09 < (data[RTC_SEC] & 0x0F) ||
+	    0x59 < min || 0x09 < (min & 0x0F) ||
+	    0x23 < data[RTC_HOUR] || 0x09 < (data[RTC_HOUR] & 0x0F) ||
+	    0x07 < data[RTC_DAY] || 0x00 == data[RTC_DAY] ||
+	    0x12 < month ||
+	    0x99 < years || 0x09 < (years & 0x0F) ||
+	    daysInMonth[month] < date || 0x09 < (date & 0x0F) || 0x00 == date ||
+	    (0x29 == date && 0x02 == month &&
+	     ((0x00 != (years & 0x03)) ||
+	      (0x00 == years && 0x00 != (data[RTC_MONTH] & 0xC0))))) {
+		printf("Resetting M41T60 RTC clock.\n");
+		/*
+		 * Set to 00:00:00 1900-01-01 (Monday)
+		 */
+		data[RTC_SEC] = 0x00;
+		data[RTC_MIN] &= 0x80;	/* preserve OFIE bit */
+		data[RTC_HOUR] = 0x00;
+		data[RTC_DAY] = 0x02;
+		data[RTC_DATE] = 0x01;
+		data[RTC_MONTH] = 0xC1;
+		data[RTC_YEAR] = 0x00;
+		data[RTC_CTRL] &= 0x7F;	/* reset OUT bit */
+
+		if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+			printf("I2C write failed in rtc_validate()\n");
+			return 0;
+		}
+	}
+	return data;
+}
+
+void rtc_get(struct rtc_time *tmp)
+{
+	uchar const *const data = rtc_validate();
+
+	if (!data)
+		return;
+
+	tmp->tm_sec = bcd2bin(data[RTC_SEC] & 0x7F);
+	tmp->tm_min = bcd2bin(data[RTC_MIN] & 0x7F);
+	tmp->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3F);
+	tmp->tm_mday = bcd2bin(data[RTC_DATE] & 0x3F);
+	tmp->tm_mon = bcd2bin(data[RTC_MONTH] & 0x1F);
+	tmp->tm_year = cb2year(data[RTC_MONTH] >> 6) + bcd2bin(data[RTC_YEAR]);
+	tmp->tm_wday = bcd2bin(data[RTC_DAY] & 0x07) - 1;
+	tmp->tm_yday = 0;
+	tmp->tm_isdst = 0;
+
+	debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	      tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	      tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
+
+void rtc_set(struct rtc_time *tmp)
+{
+	uchar *const data = rtc_validate();
+
+	if (!data)
+		return;
+
+	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	      tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	      tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	data[RTC_SEC] = (data[RTC_SEC] & 0x80) | (bin2bcd(tmp->tm_sec) & 0x7F);
+	data[RTC_MIN] = (data[RTC_MIN] & 0X80) | (bin2bcd(tmp->tm_min) & 0X7F);
+	data[RTC_HOUR] = bin2bcd(tmp->tm_hour) & 0x3F;
+	data[RTC_DATE] = bin2bcd(tmp->tm_mday) & 0x3F;
+	data[RTC_MONTH] = bin2bcd(tmp->tm_mon) & 0x1F;
+	data[RTC_YEAR] = bin2bcd(tmp->tm_year % 100);
+	data[RTC_MONTH] |= year2cb(tmp->tm_year) << 6;
+	data[RTC_DAY] = bin2bcd(tmp->tm_wday + 1) & 0x07;
+	if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) {
+		printf("I2C write failed in rtc_set()\n");
+		return;
+	}
+}
+
+void rtc_reset(void)
+{
+	uchar *const data = rtc_validate();
+	char const *const s = getenv("rtccal");
+
+	if (!data)
+		return;
+
+	rtc_dump("begin reset");
+	/*
+	 * If environmental variable "rtccal" is present, it must be a hex value
+	 * between 0x00 and 0x3F, inclusive.  The five least-significan bits
+	 * represent the calibration magnitude, and the sixth bit the sign bit.
+	 * If these do not match the contents of the hardware register, that
+	 * register is updated.  The value 0x00 imples no correction.  Consult
+	 * the M41T60 documentation for further details.
+	 */
+	if (s) {
+		unsigned long const l = simple_strtoul(s, 0, 16);
+
+		if (l <= 0x3F) {
+			if ((data[RTC_CTRL] & 0x3F) != l) {
+				printf("Setting RTC calibration to 0x%02X\n",
+				       l);
+				data[RTC_CTRL] &= 0xC0;
+				data[RTC_CTRL] |= (uchar) l;
+			}
+		} else
+			printf("environment parameter \"rtccal\" not valid: "
+			       "ignoring\n");
+	}
+	/*
+	 * Turn off frequency test.
+	 */
+	data[RTC_CTRL] &= 0xBF;
+	if (i2c_write(CFG_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) {
+		printf("I2C write failed in rtc_reset()\n");
+		return;
+	}
+	rtc_dump("end reset");
+}
+#endif /* CONFIG_RTC_M41T60 && CFG_I2C_RTC_ADDR && CONFIG_CMD_DATE */
diff --git a/rtc/m48t35ax.c b/drivers/rtc/m48t35ax.c
index 0a0ffa8aa..0a0ffa8aa 100644
--- a/rtc/m48t35ax.c
+++ b/drivers/rtc/m48t35ax.c
diff --git a/rtc/max6900.c b/drivers/rtc/max6900.c
index c75a8e04c..c75a8e04c 100644
--- a/rtc/max6900.c
+++ b/drivers/rtc/max6900.c
diff --git a/rtc/mc146818.c b/drivers/rtc/mc146818.c
index ab377ed73..ab377ed73 100644
--- a/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
diff --git a/rtc/mcfrtc.c b/drivers/rtc/mcfrtc.c
index 27386e586..27386e586 100644
--- a/rtc/mcfrtc.c
+++ b/drivers/rtc/mcfrtc.c
diff --git a/rtc/mk48t59.c b/drivers/rtc/mk48t59.c
index bacdb5b70..bacdb5b70 100644
--- a/rtc/mk48t59.c
+++ b/drivers/rtc/mk48t59.c
diff --git a/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c
index 216386aba..216386aba 100644
--- a/rtc/mpc5xxx.c
+++ b/drivers/rtc/mpc5xxx.c
diff --git a/rtc/mpc8xx.c b/drivers/rtc/mpc8xx.c
index 8d10c0e46..8d10c0e46 100644
--- a/rtc/mpc8xx.c
+++ b/drivers/rtc/mpc8xx.c
diff --git a/rtc/pcf8563.c b/drivers/rtc/pcf8563.c
index 2d73d5d7e..2d73d5d7e 100644
--- a/rtc/pcf8563.c
+++ b/drivers/rtc/pcf8563.c
diff --git a/rtc/rs5c372.c b/drivers/rtc/rs5c372.c
index 3d1346eaa..3d1346eaa 100644
--- a/rtc/rs5c372.c
+++ b/drivers/rtc/rs5c372.c
diff --git a/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
index 7f8b4fad0..7f8b4fad0 100644
--- a/rtc/s3c24x0_rtc.c
+++ b/drivers/rtc/s3c24x0_rtc.c
diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c
new file mode 100644
index 000000000..319f0512c
--- /dev/null
+++ b/drivers/rtc/x1205.c
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * based on a the Linux rtc-x1207.c driver which is:
+ *	Copyright 2004 Karen Spearel
+ *	Copyright 2005 Alessandro Zummo
+ *
+ * Information and datasheet:
+ * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for Xicor/Intersil X1205 RTC
+ */
+
+/* #define	DEBUG	*/
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+#include <bcd.h>
+
+#if defined(CONFIG_RTC_X1205) && defined(CONFIG_CMD_DATE)
+
+#define CCR_SEC			0
+#define CCR_MIN			1
+#define CCR_HOUR		2
+#define CCR_MDAY		3
+#define CCR_MONTH		4
+#define CCR_YEAR		5
+#define CCR_WDAY		6
+#define CCR_Y2K			7
+
+#define X1205_REG_SR		0x3F	/* status register */
+#define X1205_REG_Y2K		0x37
+#define X1205_REG_DW		0x36
+#define X1205_REG_YR		0x35
+#define X1205_REG_MO		0x34
+#define X1205_REG_DT		0x33
+#define X1205_REG_HR		0x32
+#define X1205_REG_MN		0x31
+#define X1205_REG_SC		0x30
+#define X1205_REG_DTR		0x13
+#define X1205_REG_ATR		0x12
+#define X1205_REG_INT		0x11
+#define X1205_REG_0		0x10
+#define X1205_REG_Y2K1		0x0F
+#define X1205_REG_DWA1		0x0E
+#define X1205_REG_YRA1		0x0D
+#define X1205_REG_MOA1		0x0C
+#define X1205_REG_DTA1		0x0B
+#define X1205_REG_HRA1		0x0A
+#define X1205_REG_MNA1		0x09
+#define X1205_REG_SCA1		0x08
+#define X1205_REG_Y2K0		0x07
+#define X1205_REG_DWA0		0x06
+#define X1205_REG_YRA0		0x05
+#define X1205_REG_MOA0		0x04
+#define X1205_REG_DTA0		0x03
+#define X1205_REG_HRA0		0x02
+#define X1205_REG_MNA0		0x01
+#define X1205_REG_SCA0		0x00
+
+#define X1205_CCR_BASE		0x30	/* Base address of CCR */
+#define X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */
+
+#define X1205_SR_RTCF		0x01	/* Clock failure */
+#define X1205_SR_WEL		0x02	/* Write Enable Latch */
+#define X1205_SR_RWEL		0x04	/* Register Write Enable */
+
+#define X1205_DTR_DTR0		0x01
+#define X1205_DTR_DTR1		0x02
+#define X1205_DTR_DTR2		0x04
+
+#define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */
+
+static void rtc_write(int reg, u8 val)
+{
+	i2c_write(CFG_I2C_RTC_ADDR, reg, 2, &val, 1);
+}
+
+/*
+ * In the routines that deal directly with the x1205 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+ * Epoch is initialized as 2000. Time is set to UTC.
+ */
+void rtc_get(struct rtc_time *tm)
+{
+	u8 buf[8];
+
+	i2c_read(CFG_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
+
+	debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+	      "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+	      __FUNCTION__,
+	      buf[0], buf[1], buf[2], buf[3],
+	      buf[4], buf[5], buf[6], buf[7]);
+
+	tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
+	tm->tm_min = BCD2BIN(buf[CCR_MIN]);
+	tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
+	tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
+	tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); /* mon is 0-11 */
+	tm->tm_year = BCD2BIN(buf[CCR_YEAR])
+		+ (BCD2BIN(buf[CCR_Y2K]) * 100);
+	tm->tm_wday = buf[CCR_WDAY];
+
+	debug("%s: tm is secs=%d, mins=%d, hours=%d, "
+	      "mday=%d, mon=%d, year=%d, wday=%d\n",
+	      __FUNCTION__,
+	      tm->tm_sec, tm->tm_min, tm->tm_hour,
+	      tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+}
+
+void rtc_set(struct rtc_time *tm)
+{
+	int i;
+	u8 buf[8];
+
+	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	      tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+	      tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
+	buf[CCR_MIN] = BIN2BCD(tm->tm_min);
+
+	/* set hour and 24hr bit */
+	buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
+
+	buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
+
+	/* month, 1 - 12 */
+	buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
+
+	/* year, since the rtc epoch*/
+	buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
+	buf[CCR_WDAY] = tm->tm_wday & 0x07;
+	buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
+
+	/* this sequence is required to unlock the chip */
+	rtc_write(X1205_REG_SR, X1205_SR_WEL);
+	rtc_write(X1205_REG_SR, X1205_SR_WEL | X1205_SR_RWEL);
+
+	/* write register's data */
+	for (i = 0; i < 8; i++)
+		rtc_write(X1205_CCR_BASE + i, buf[i]);
+
+	rtc_write(X1205_REG_SR, 0);
+}
+
+void rtc_reset(void)
+{
+	/*
+	 * Nothing to do
+	 */
+}
+
+#endif
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 40f3d672e..ee2b78085 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -25,8 +25,20 @@ include $(TOPDIR)/config.mk
 
 LIB 	:= $(obj)libserial.a
 
-COBJS 	:= mcfuart.o serial_pl010.o serial_pl011.o
-
+COBJS-y += atmel_usart.o
+COBJS-y += mcfuart.o
+COBJS-y += ns9750_serial.o
+COBJS-y += ns16550.o
+COBJS-y += s3c4510b_uart.o
+COBJS-y += serial.o
+COBJS-y += serial_max3100.o
+COBJS-y += serial_pl010.o
+COBJS-y += serial_pl011.o
+COBJS-y += serial_xuartlite.o
+COBJS-y += serial_sh.o
+COBJS-y += usbtty.o
+
+COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
 OBJS 	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/atmel_usart.c b/drivers/serial/atmel_usart.c
index f35b99730..f35b99730 100644
--- a/drivers/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
diff --git a/drivers/atmel_usart.h b/drivers/serial/atmel_usart.h
index af3773a99..af3773a99 100644
--- a/drivers/atmel_usart.h
+++ b/drivers/serial/atmel_usart.h
diff --git a/drivers/ns16550.c b/drivers/serial/ns16550.c
index 2429464d8..2429464d8 100644
--- a/drivers/ns16550.c
+++ b/drivers/serial/ns16550.c
diff --git a/drivers/ns9750_serial.c b/drivers/serial/ns9750_serial.c
index 02c0d3952..02c0d3952 100644
--- a/drivers/ns9750_serial.c
+++ b/drivers/serial/ns9750_serial.c
diff --git a/drivers/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c
index ddcd591f8..ddcd591f8 100644
--- a/drivers/s3c4510b_uart.c
+++ b/drivers/serial/s3c4510b_uart.c
diff --git a/drivers/s3c4510b_uart.h b/drivers/serial/s3c4510b_uart.h
index b06c76d84..b06c76d84 100644
--- a/drivers/s3c4510b_uart.h
+++ b/drivers/serial/s3c4510b_uart.h
diff --git a/drivers/serial.c b/drivers/serial/serial.c
index 76425d879..76425d879 100644
--- a/drivers/serial.c
+++ b/drivers/serial/serial.c
diff --git a/drivers/serial_max3100.c b/drivers/serial/serial_max3100.c
index 35c559698..35c559698 100644
--- a/drivers/serial_max3100.c
+++ b/drivers/serial/serial_max3100.c
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
new file mode 100644
index 000000000..ee44ba264
--- /dev/null
+++ b/drivers/serial/serial_sh.c
@@ -0,0 +1,177 @@
+/*
+ * SuperH SCIF device driver.
+ * Copyright (c) 2007 Nobuhiro Iwamatsu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#ifdef CFG_SCIF_CONSOLE
+
+#if defined (CONFIG_CONS_SCIF0)
+#define SCIF_BASE	SCIF0_BASE
+#elif defined (CONFIG_CONS_SCIF1)
+#define SCIF_BASE	SCIF1_BASE
+#else
+#error "Default SCIF doesn't set....."
+#endif
+
+#define SCSMR 	(vu_short *)(SCIF_BASE + 0x0)
+#define SCBRR 	(vu_char  *)(SCIF_BASE + 0x4)
+#define SCSCR 	(vu_short *)(SCIF_BASE + 0x8)
+#define SCFTDR 	(vu_char  *)(SCIF_BASE + 0xC)
+#define SCFSR 	(vu_short *)(SCIF_BASE + 0x10)
+#define SCFRDR 	(vu_char  *)(SCIF_BASE + 0x14)
+#define SCFCR 	(vu_short *)(SCIF_BASE + 0x18)
+#define SCFDR 	(vu_short *)(SCIF_BASE + 0x1C)
+#if defined(CONFIG_SH4A)
+#define SCRFDR	(vu_short *)(SCIF_BASE + 0x20)
+#define SCSPTR	(vu_short *)(SCIF_BASE + 0x24)
+#define SCLSR   (vu_short *)(SCIF_BASE + 0x28)
+#define SCRER	(vu_short *)(SCIF_BASE + 0x2C)
+#elif defined (CONFIG_SH4)
+#define SCSPTR 	(vu_short *)(SCIF_BASE + 0x20)
+#define SCLSR 	(vu_short *)(SCIF_BASE + 0x24)
+#elif defined (CONFIG_SH3)
+#define SCLSR 	(vu_short *)(SCIF_BASE + 0x24)
+#endif
+
+#define SCR_RE 		(1 << 4)
+#define SCR_TE 		(1 << 5)
+#define FCR_RFRST	(1 << 1) /* RFCL */
+#define FCR_TFRST	(1 << 2) /* TFCL */
+#define FSR_DR   	(1 << 0)
+#define FSR_RDF  	(1 << 1)
+#define FSR_FER  	(1 << 3)
+#define FSR_BRK  	(1 << 4)
+#define FSR_FER  	(1 << 3)
+#define FSR_TEND 	(1 << 6)
+#define FSR_ER   	(1 << 7)
+
+/*----------------------------------------------------------------------*/
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int divisor = gd->baudrate * 32;
+
+	*SCBRR = (CONFIG_SYS_CLK_FREQ + (divisor / 2)) /
+						(gd->baudrate * 32) - 1;
+}
+
+int serial_init (void)
+{
+	*SCSCR = (SCR_RE | SCR_TE);
+	*SCSMR = 0 ;
+	*SCSMR = 0;
+	*SCFCR = (FCR_RFRST | FCR_TFRST);
+	*SCFCR;
+	*SCFCR = 0;
+
+	serial_setbrg();
+	return 0;
+}
+
+static int serial_tx_fifo_level (void)
+{
+	return (*SCFDR >> 8) & 0x1F;
+}
+
+static int serial_rx_fifo_level (void)
+{
+	return (*SCFDR >> 0) & 0x1F;
+}
+
+void serial_raw_putc (const char c)
+{
+	unsigned int fsr_bits_to_clear;
+
+	while (1) {
+		if (*SCFSR & FSR_TEND) {		/* Tx fifo is empty */
+			fsr_bits_to_clear = FSR_TEND;
+			break;
+		}
+	}
+
+	*SCFTDR = c;
+	if (fsr_bits_to_clear != 0)
+		*SCFSR &= ~fsr_bits_to_clear;
+}
+
+void serial_putc (const char c)
+{
+	if (c == '\n')
+		serial_raw_putc ('\r');
+	serial_raw_putc (c);
+}
+
+void serial_puts (const char *s)
+{
+	char c;
+	while ((c = *s++) != 0)
+		serial_putc (c);
+}
+
+int serial_tstc (void)
+{
+	return serial_rx_fifo_level() ? 1 : 0;
+}
+
+#define FSR_ERR_CLEAR   0x0063
+#define RDRF_CLEAR      0x00fc
+#define LSR_ORER        1
+void handle_error( void ){
+
+	(void)*SCFSR ;
+	*SCFSR = FSR_ERR_CLEAR ;
+	(void)*SCLSR ;
+	*SCLSR = 0x00 ;
+}
+
+int serial_getc_check( void ){
+	unsigned short status;
+
+	status = *SCFSR ;
+
+	if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK))
+		handle_error();
+	if( *SCLSR & LSR_ORER )
+		handle_error();
+	return (status & ( FSR_DR | FSR_RDF ));
+}
+
+int serial_getc (void)
+{
+	unsigned short status ;
+	char ch;
+	while(!serial_getc_check());
+
+	ch = *SCFRDR;
+	status =  *SCFSR ;
+
+	*SCFSR = RDRF_CLEAR ;
+
+	if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK))
+		handle_error();
+
+	if( *SCLSR & LSR_ORER )
+		handle_error();
+
+	return ch ;
+}
+
+#endif	/* CFG_SCIF_CONSOLE */
diff --git a/drivers/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
index d678ab6b7..d678ab6b7 100644
--- a/drivers/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
diff --git a/drivers/usbtty.c b/drivers/serial/usbtty.c
index a3b50131d..a3b50131d 100644
--- a/drivers/usbtty.c
+++ b/drivers/serial/usbtty.c
diff --git a/drivers/usbtty.h b/drivers/serial/usbtty.h
index 8154e3072..8154e3072 100644
--- a/drivers/usbtty.h
+++ b/drivers/serial/usbtty.h
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
new file mode 100644
index 000000000..f8ea167b1
--- /dev/null
+++ b/drivers/usb/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libusb.a
+
+COBJS-y += isp116x-hcd.o
+COBJS-y += sl811_usb.o
+COBJS-y += usb_ohci.o
+COBJS-y += usbdcore.o
+COBJS-y += usbdcore_ep0.o
+COBJS-y += usbdcore_mpc8xx.o
+COBJS-y += usbdcore_omap1510.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/isp116x-hcd.c b/drivers/usb/isp116x-hcd.c
index b21af10d0..b21af10d0 100644
--- a/drivers/isp116x-hcd.c
+++ b/drivers/usb/isp116x-hcd.c
diff --git a/drivers/isp116x.h b/drivers/usb/isp116x.h
index a3ce3b582..a3ce3b582 100644
--- a/drivers/isp116x.h
+++ b/drivers/usb/isp116x.h
diff --git a/drivers/sl811.h b/drivers/usb/sl811.h
index c1f9f013b..c1f9f013b 100644
--- a/drivers/sl811.h
+++ b/drivers/usb/sl811.h
diff --git a/drivers/sl811_usb.c b/drivers/usb/sl811_usb.c
index b0cdf0bc2..c1f8427c9 100644
--- a/drivers/sl811_usb.c
+++ b/drivers/usb/sl811_usb.c
@@ -41,7 +41,7 @@
 #include <usb.h>
 #include "sl811.h"
 
-#include "../board/kup/common/kup.h"
+#include "../../board/kup/common/kup.h"
 
 #ifdef __PPC__
 # define EIEIO		__asm__ volatile ("eieio")
diff --git a/drivers/usb_ohci.c b/drivers/usb/usb_ohci.c
index 7ddcab63e..cfa384eff 100644
--- a/drivers/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -59,6 +59,10 @@
 #include <usb.h>
 #include "usb_ohci.h"
 
+#ifdef CONFIG_AT91RM9200
+#include <asm/arch/hardware.h>	/* needed for AT91_USB_HOST_BASE */
+#endif
+
 #if defined(CONFIG_ARM920T) || \
     defined(CONFIG_S3C2400) || \
     defined(CONFIG_S3C2410) || \
diff --git a/drivers/usb_ohci.h b/drivers/usb/usb_ohci.h
index 380cb4c92..380cb4c92 100644
--- a/drivers/usb_ohci.h
+++ b/drivers/usb/usb_ohci.h
diff --git a/drivers/usbdcore.c b/drivers/usb/usbdcore.c
index 308c7cecc..308c7cecc 100644
--- a/drivers/usbdcore.c
+++ b/drivers/usb/usbdcore.c
diff --git a/drivers/usbdcore_ep0.c b/drivers/usb/usbdcore_ep0.c
index 1e44f322a..1e44f322a 100644
--- a/drivers/usbdcore_ep0.c
+++ b/drivers/usb/usbdcore_ep0.c
diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c
index d4c409656..d4c409656 100644
--- a/drivers/usbdcore_mpc8xx.c
+++ b/drivers/usb/usbdcore_mpc8xx.c
diff --git a/drivers/usbdcore_omap1510.c b/drivers/usb/usbdcore_omap1510.c
index 84bb936d8..84bb936d8 100644
--- a/drivers/usbdcore_omap1510.c
+++ b/drivers/usb/usbdcore_omap1510.c
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
new file mode 100644
index 000000000..36611ecdd
--- /dev/null
+++ b/drivers/video/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libvideo.a
+
+COBJS-y += ati_radeon_fb.o
+COBJS-y += cfb_console.o
+COBJS-y += ct69000.o
+COBJS-y += sed13806.o
+COBJS-y += sed156x.o
+COBJS-y += sm501.o
+COBJS-y += smiLynxEM.o
+COBJS-y += videomodes.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/ati_ids.h b/drivers/video/ati_ids.h
index 3e72a7dd4..3e72a7dd4 100644
--- a/drivers/ati_ids.h
+++ b/drivers/video/ati_ids.h
diff --git a/drivers/ati_radeon_fb.c b/drivers/video/ati_radeon_fb.c
index c174f37b3..0bdaa1c04 100644
--- a/drivers/ati_radeon_fb.c
+++ b/drivers/video/ati_radeon_fb.c
@@ -300,7 +300,7 @@ typedef struct {
 	u32 val;
 } reg_val;
 
-
+#if 0	/* unused ? -> scheduled for removal */
 /* these common regs are cleared before mode setting so they do not
  * interfere with anything
  */
@@ -316,11 +316,10 @@ static reg_val common_regs[] = {
 	{ CAP0_TRIG_CNTL, 0 },
 	{ CAP1_TRIG_CNTL, 0 },
 };
-
+#endif /* 0 */
 
 void radeon_setmode(void)
 {
-	int i;
 	struct radeon_regs *mode = malloc(sizeof(struct radeon_regs));
 
 	mode->crtc_gen_cntl = 0x03000200;
@@ -351,6 +350,9 @@ void radeon_setmode(void)
 	radeon_write_pll_regs(rinfo, mode);
 }
 
+#include "../bios_emulator/include/biosemu.h"
+extern int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp);
+
 int radeon_probe(struct radeonfb_info *rinfo)
 {
 	pci_dev_t pdev;
diff --git a/drivers/ati_radeon_fb.h b/drivers/video/ati_radeon_fb.h
index b5c4b8b57..b5c4b8b57 100644
--- a/drivers/ati_radeon_fb.h
+++ b/drivers/video/ati_radeon_fb.h
diff --git a/drivers/cfb_console.c b/drivers/video/cfb_console.c
index bcf877194..bcf877194 100644
--- a/drivers/cfb_console.c
+++ b/drivers/video/cfb_console.c
diff --git a/drivers/ct69000.c b/drivers/video/ct69000.c
index 29d82e4c4..29d82e4c4 100644
--- a/drivers/ct69000.c
+++ b/drivers/video/ct69000.c
diff --git a/drivers/sed13806.c b/drivers/video/sed13806.c
index 6996ca805..6996ca805 100644
--- a/drivers/sed13806.c
+++ b/drivers/video/sed13806.c
diff --git a/drivers/sed156x.c b/drivers/video/sed156x.c
index e9d5ed4cc..e9d5ed4cc 100644
--- a/drivers/sed156x.c
+++ b/drivers/video/sed156x.c
diff --git a/drivers/sm501.c b/drivers/video/sm501.c
index 23db02cd1..23db02cd1 100644
--- a/drivers/sm501.c
+++ b/drivers/video/sm501.c
diff --git a/drivers/smiLynxEM.c b/drivers/video/smiLynxEM.c
index 20f9beb01..20f9beb01 100644
--- a/drivers/smiLynxEM.c
+++ b/drivers/video/smiLynxEM.c
diff --git a/drivers/videomodes.c b/drivers/video/videomodes.c
index c81e5bc14..c81e5bc14 100644
--- a/drivers/videomodes.c
+++ b/drivers/video/videomodes.c
diff --git a/drivers/videomodes.h b/drivers/video/videomodes.h
index e2dffe7fe..e2dffe7fe 100644
--- a/drivers/videomodes.h
+++ b/drivers/video/videomodes.h
diff --git a/examples/.gitignore b/examples/.gitignore
new file mode 100644
index 000000000..f54702478
--- /dev/null
+++ b/examples/.gitignore
@@ -0,0 +1,5 @@
+/hello_world
+/interrupt
+/sched
+*.bin
+*.srec
diff --git a/examples/Makefile b/examples/Makefile
index e9b4974be..71a8c7f3a 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -61,6 +61,11 @@ ifeq ($(ARCH),avr32)
 LOAD_ADDR = 0x00000000
 endif
 
+ifeq ($(ARCH),sh)
+LOAD_ADDR = 0x8C000000
+endif
+
+
 include $(TOPDIR)/config.mk
 
 ELF	= hello_world
diff --git a/examples/smc91111_eeprom.c b/examples/smc91111_eeprom.c
index 98e3e86ff..b8a3594e9 100644
--- a/examples/smc91111_eeprom.c
+++ b/examples/smc91111_eeprom.c
@@ -29,7 +29,7 @@
 
 #include <common.h>
 #include <exports.h>
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
 #define EEPROM		0x1;
diff --git a/examples/stubs.c b/examples/stubs.c
index 26df6e06a..571c4d50a 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -132,7 +132,7 @@ gd_t *global_data;
  */
 #define EXPORT_FUNC(x)			\
 	asm volatile (			\
-"       .globl _" #x "\n_"		\
+"	.globl _" #x "\n_"		\
 #x ":\n"				\
 "	P0 = [P5 + %0]\n"		\
 "	P0 = [P0 + %1]\n"		\
@@ -151,6 +151,22 @@ gd_t *global_data;
 		:					\
 		: "i"(offsetof(gd_t, jt)), "i"(XF_ ##x)	\
 		: "r8");
+#elif defined(CONFIG_SH)
+/*
+ * r13 holds the pointer to the global_data. r1 is a call clobbered.
+ */
+#define EXPORT_FUNC(x)					\
+	asm volatile (					\
+		"	.align	2\n"			\
+		"	.globl " #x "\n"		\
+		#x ":\n"				\
+		"	mov	r13, r1\n"		\
+		"	add	%0, r1\n"		\
+		"	add	%1, r1\n"		\
+		"	jmp	@r1\n"			\
+		"	nop\n"				\
+		"	nop\n"				\
+		: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r1");
 #else
 #error stubs definition missing for this architecture
 #endif
diff --git a/fs/jffs2/Makefile b/fs/jffs2/Makefile
index c1357d0aa..a071af1f6 100644
--- a/fs/jffs2/Makefile
+++ b/fs/jffs2/Makefile
@@ -26,9 +26,15 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)libjffs2.a
 
 AOBJS	=
-COBJS	= jffs2_1pass.o compr_rtime.o compr_rubin.o compr_zlib.o mini_inflate.o
-COBJS	+= compr_lzo.o compr_lzari.o
-
+COBJS-y += jffs2_1pass.o
+COBJS-y += compr_rtime.o
+COBJS-y += compr_rubin.o
+COBJS-y += compr_zlib.o
+COBJS-y += mini_inflate.o
+COBJS-y += compr_lzo.o
+COBJS-y += compr_lzari.o
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 
diff --git a/include/.gitignore b/include/.gitignore
new file mode 100644
index 000000000..d8fda80d5
--- /dev/null
+++ b/include/.gitignore
@@ -0,0 +1,6 @@
+/asm
+/asm-ppc/arch
+/bmp_logo.h
+/config.h
+/config.mk
+/version_autogenerated.h
diff --git a/include/405_mal.h b/include/405_mal.h
index 2a421848b..7ea4eb1cc 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -92,7 +92,9 @@
 #define MAL_ESR_PBEI	  0x00000001
       /* ^^			 ^^   */
       /* Mal IER		      */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define MAL_IER_PT	  0x00000080
 #define MAL_IER_PRE	  0x00000040
 #define MAL_IER_PWE	  0x00000020
diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h
index 66b799741..7c79bd153 100644
--- a/include/4xx_i2c.h
+++ b/include/4xx_i2c.h
@@ -43,7 +43,7 @@
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
-#elif defined(CONFIG_440)
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
 /* all remaining 440 variants */
 #define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
 #else
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index 8bb0c4752..b868e38a3 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -24,8 +24,6 @@
 
 #ifndef __ASSEMBLY__
 #include "AT91RM9200.h"
-#else
-#include "AT91RM9200_inc.h"
 #endif
 
 /* Virtual and Physical base address for system peripherals */
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 47c18e7e8..029b7f9ee 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -34,6 +34,32 @@ static inline void sync(void)
 }
 
 /*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+/*
  * Generic virtual read/write.  Note that we don't support half-word
  * read/writes.  We define __arch_*[bl] here, and leave __arch_*w
  * to the architecture specific code.
diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h
new file mode 100644
index 000000000..29b1fd663
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/chip-features.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__
+#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__
+
+/* Currently, all the AP700x chips have these */
+#define AT32AP700x_CHIP_HAS_USART
+#define AT32AP700x_CHIP_HAS_MMCI
+
+/* Only AP7000 has ethernet interface */
+#ifdef CONFIG_AT32AP7000
+#define AT32AP700x_CHIP_HAS_MACB
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
index 7e20d97b7..ea84c0874 100644
--- a/include/asm-avr32/arch-at32ap7000/clk.h
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -22,6 +22,8 @@
 #ifndef __ASM_AVR32_ARCH_CLK_H__
 #define __ASM_AVR32_ARCH_CLK_H__
 
+#include <asm/arch/chip-features.h>
+
 #ifdef CONFIG_PLL
 #define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
 #else
@@ -50,10 +52,13 @@ static inline unsigned long get_sdram_clk_rate(void)
 {
 	return get_hsb_clk_rate();
 }
+#ifdef AT32AP700x_CHIP_HAS_USART
 static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
 {
 	return get_pba_clk_rate();
 }
+#endif
+#ifdef AT32AP700x_CHIP_HAS_USART
 static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
 {
 	return get_pbb_clk_rate();
@@ -62,9 +67,12 @@ static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
 {
 	return get_hsb_clk_rate();
 }
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI
 static inline unsigned long get_mci_clk_rate(void)
 {
 	return get_pbb_clk_rate();
 }
+#endif
 
 #endif /* __ASM_AVR32_ARCH_CLK_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h
index e4812d4d0..b10a3e4f8 100644
--- a/include/asm-avr32/arch-at32ap7000/gpio.h
+++ b/include/asm-avr32/arch-at32ap700x/gpio.h
@@ -22,6 +22,7 @@
 #ifndef __ASM_AVR32_ARCH_GPIO_H__
 #define __ASM_AVR32_ARCH_GPIO_H__
 
+#include <asm/arch/chip-features.h>
 #include <asm/arch/memory-map.h>
 
 #define NR_GPIO_CONTROLLERS	5
@@ -201,12 +202,19 @@ void gpio_select_periph_A(unsigned int pin, int use_pullup);
 void gpio_select_periph_B(unsigned int pin, int use_pullup);
 
 void gpio_enable_ebi(void);
+
+#ifdef AT32AP700x_CHIP_HAS_USART
 void gpio_enable_usart0(void);
 void gpio_enable_usart1(void);
 void gpio_enable_usart2(void);
 void gpio_enable_usart3(void);
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MACB
 void gpio_enable_macb0(void);
 void gpio_enable_macb1(void);
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI
 void gpio_enable_mmci(void);
+#endif
 
 #endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
index b0e787a92..b0e787a92 100644
--- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h
+++ b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
index 5513e88e7..5513e88e7 100644
--- a/include/asm-avr32/arch-at32ap7000/memory-map.h
+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h
index fcfbbb3c6..fcfbbb3c6 100644
--- a/include/asm-avr32/arch-at32ap7000/mmc.h
+++ b/include/asm-avr32/arch-at32ap700x/mmc.h
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index 3c0d56923..ba14674cf 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -93,4 +93,36 @@ static inline void sync(void)
 {
 }
 
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ *
+ * This implementation works for memory below 512MiB (flash, etc.) as
+ * well as above 3.5GiB (internal peripherals.)
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(1 << 7)
+#define MAP_WRBACK	(MAP_WRCOMBINE | (1 << 9))
+#define MAP_WRTHROUGH	(MAP_WRBACK | (1 << 0))
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	if (flags == MAP_WRBACK)
+		return (void *)P1SEGADDR(paddr);
+	else
+		return (void *)P2SEGADDR(paddr);
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long len)
+{
+
+}
+
 #endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index 332d2c643..512e13d1c 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -41,6 +41,32 @@ static inline void sync(void)
 }
 
 /*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+/*
  * These are for ISA/PCI shared memory _only_ and should never be used
  * on any other type of memory, including Zorro memory. They are meant to
  * access the bus in the bus byte order which is little-endian!.
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index e64d788fa..db4f44281 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -205,4 +205,30 @@ static inline void sync(void)
 {
 }
 
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
 #endif
diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h
index 2a3980c13..271c27655 100644
--- a/include/asm-m68k/immap_5329.h
+++ b/include/asm-m68k/immap_5329.h
@@ -57,7 +57,8 @@
 #define MMAP_PWM	0xFC090000
 #define MMAP_EPORT	0xFC094000
 #define MMAP_WDOG	0xFC098000
-#define MMAP_CCM	0xFC0A0000
+#define MMAP_RCM	0xFC0A0000
+#define MMAP_CCM	0xFC0A0004
 #define MMAP_GPIO	0xFC0A4000
 #define MMAP_RTC	0xFC0A8000
 #define MMAP_LCDC	0xFC0AC000
@@ -479,20 +480,22 @@ typedef struct wdog_ctrl {
 
 /*Chip configuration module registers */
 typedef struct ccm_ctrl {
-	u8 rstctrl;		/* 0x00 Reset Controller register */
-	u8 rststat;		/* 0x01 Reset Status register */
-	u16 res1;		/* 0x02 - 0x03 */
-	u16 ccr;		/* 0x04 Chip configuration register */
-	u16 res2;		/* 0x06 */
-	u16 rcon;		/* 0x08 Rreset configuration register */
-	u16 cir;		/* 0x0A Chip identification register */
-	u32 res3;		/* 0x0C */
-	u16 misccr;		/* 0x10 Miscellaneous control register */
-	u16 cdr;		/* 0x12 Clock divider register */
-	u16 uhcsr;		/* 0x14 USB Host controller status register */
-	u16 uocsr;		/* 0x16 USB On-the-Go Controller Status Register */
+	u16 ccr;		/* 0x00 Chip configuration register */
+	u16 res2;		/* 0x02 */
+	u16 rcon;		/* 0x04 Rreset configuration register */
+	u16 cir;		/* 0x06 Chip identification register */
+	u32 res3;		/* 0x08 */
+	u16 misccr;		/* 0x0A Miscellaneous control register */
+	u16 cdr;		/* 0x0C Clock divider register */
+	u16 uhcsr;		/* 0x10 USB Host controller status register */
+	u16 uocsr;		/* 0x12 USB On-the-Go Controller Status Reg */
 } ccm_t;
 
+typedef struct rcm {
+	u8 rcr;
+	u8 rsr;
+} rcm_t;
+
 /* GPIO port registers */
 typedef struct gpio_ctrl {
 	/* Port Output Data Registers */
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index e14a581dc..91d759219 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -28,6 +28,20 @@
 
 #include <asm/byteorder.h>
 
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesirable for some devices.
+ */
+#define __raw_readb(addr) \
+    ({ u8 __v = (*(volatile u8 *) (addr)); __v; })
+#define __raw_readw(addr) \
+    ({ u16 __v = (*(volatile u16 *) (addr)); __v; })
+#define __raw_readl(addr) \
+    ({ u32 __v = (*(volatile u32 *) (addr)); __v; })
+
+#define __raw_writeb(addr,b) (void)((*(volatile u8 *) (addr)) = (b))
+#define __raw_writew(addr,w) (void)((*(volatile u16 *) (addr)) = (w))
+#define __raw_writel(addr,l) (void)((*(volatile u32 *) (addr)) = (l))
+
 #define readb(addr)		in_8((volatile u8 *)(addr))
 #define writeb(b,addr)		out_8((volatile u8 *)(addr), (b))
 #if !defined(__BIG_ENDIAN)
@@ -218,4 +232,31 @@ static inline void sync(void)
 	 * compatibility (CFI driver)
 	 */
 }
+
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
 #endif				/* __ASM_M68K_IO_H__ */
diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h
index cd69fb0b5..3f056511c 100644
--- a/include/asm-m68k/m5329.h
+++ b/include/asm-m68k/m5329.h
@@ -246,6 +246,21 @@
 #define CSCR_BSTW			(0x00000008)
 
 /*********************************************************************
+* Reset Controller Module (RCM)
+*********************************************************************/
+
+/* Bit definitions and macros for RCR */
+#define RCM_RCR_FRCRSTOUT		(0x40)
+#define RCM_RCR_SOFTRST			(0x80)
+
+/* Bit definitions and macros for RSR */
+#define RCM_RSR_LOL			(0x01)
+#define RCM_RSR_WDR_CORE		(0x02)
+#define RCM_RSR_EXT			(0x04)
+#define RCM_RSR_POR			(0x08)
+#define RCM_RSR_SOFT			(0x20)
+
+/*********************************************************************
 * FlexCAN Module (CAN)
 *********************************************************************/
 /* Bit definitions and macros for CAN_CANMCR */
diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h
index 8b886b0b6..b2bfb6926 100644
--- a/include/asm-m68k/m5445x.h
+++ b/include/asm-m68k/m5445x.h
@@ -792,8 +792,8 @@
 #define GPIO_PAR_FEC_FEC0_MASK		(0xF8)
 #define GPIO_PAR_FEC_FEC0_MII		(0x07)
 #define GPIO_PAR_FEC_FEC0_RMII_GPIO	(0x03)
-#define GPIO_PAR_FEC_FEC0_RMII_ATA	(0x02)
-#define GPIO_PAR_FEC_FEC0_ATA		(0x01)
+#define GPIO_PAR_FEC_FEC0_RMII_ULPI	(0x02)
+#define GPIO_PAR_FEC_FEC0_ULPI		(0x01)
 #define GPIO_PAR_FEC_FEC0_GPIO		(0x00)
 
 /* Bit definitions and macros for PAR_DMA */
diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h
index 1c77ade4f..90d18428a 100644
--- a/include/asm-microblaze/io.h
+++ b/include/asm-microblaze/io.h
@@ -129,4 +129,30 @@ static inline void sync(void)
 {
 }
 
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
 #endif /* __MICROBLAZE_IO_H__ */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index cd4d5dc9d..e27d1f159 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -71,7 +71,21 @@
  * instruction, so the lower 16 bits must be zero.  Should be true on
  * on any sane architecture; generic code does not use this assumption.
  */
-extern unsigned long mips_io_port_base;
+extern const unsigned long mips_io_port_base;
+
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases.  So we don't
+ * play quite by the book.  We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue.  Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer.  Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+	* (unsigned long *) &mips_io_port_base = base;
+}
 
 /*
  * Thanks to James van Artsdalen for a better timing-fix than
@@ -451,4 +465,30 @@ static inline void sync(void)
 {
 }
 
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
 #endif /* _ASM_IO_H */
diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h
index d77695abb..6fc339fb0 100644
--- a/include/asm-nios/io.h
+++ b/include/asm-nios/io.h
@@ -23,6 +23,14 @@
 #ifndef __ASM_NIOS_IO_H_
 #define __ASM_NIOS_IO_H_
 
+#define __raw_writeb(v,a)       (*(volatile unsigned char  *)(a) = (v))
+#define __raw_writew(v,a)       (*(volatile unsigned short *)(a) = (v))
+#define __raw_writel(v,a)       (*(volatile unsigned int   *)(a) = (v))
+
+#define __raw_readb(a)          (*(volatile unsigned char  *)(a))
+#define __raw_readw(a)          (*(volatile unsigned short *)(a))
+#define __raw_readl(a)          (*(volatile unsigned int   *)(a))
+
 #define readb(addr)\
 	({unsigned char val;\
 	 asm volatile(  "	pfxio	0		\n"\
@@ -101,4 +109,30 @@ static inline void sync(void)
 {
 }
 
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
 #endif /* __ASM_NIOS_IO_H_ */
diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h
index 5bb532295..a52b95cf2 100644
--- a/include/asm-nios2/io.h
+++ b/include/asm-nios2/io.h
@@ -29,10 +29,44 @@ static inline void sync(void)
 	__asm__ __volatile__ ("sync" : : : "memory");
 }
 
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
 extern unsigned char inb (unsigned char *port);
 extern unsigned short inw (unsigned short *port);
 extern unsigned inl (unsigned port);
 
+#define __raw_writeb(v,a)       (*(volatile unsigned char  *)(a) = (v))
+#define __raw_writew(v,a)       (*(volatile unsigned short *)(a) = (v))
+#define __raw_writel(v,a)       (*(volatile unsigned int   *)(a) = (v))
+
+#define __raw_readb(a)          (*(volatile unsigned char  *)(a))
+#define __raw_readw(a)          (*(volatile unsigned short *)(a))
+#define __raw_readl(a)          (*(volatile unsigned int   *)(a))
+
 #define readb(addr)\
 	({unsigned char val;\
 	 asm volatile( "ldbio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;})
diff --git a/include/405gp_pci.h b/include/asm-ppc/4xx_pci.h
index 3c1adec19..3c1adec19 100644
--- a/include/405gp_pci.h
+++ b/include/asm-ppc/4xx_pci.h
diff --git a/cpu/ppc4xx/440spe_pcie.h b/include/asm-ppc/4xx_pcie.h
index 38745eb79..4c03b050f 100644
--- a/cpu/ppc4xx/440spe_pcie.h
+++ b/include/asm-ppc/4xx_pcie.h
@@ -9,17 +9,38 @@
  */
 
 #include <ppc4xx.h>
-#ifndef __440SPE_PCIE_H
-#define __440SPE_PCIE_H
-
-#define mdelay(n) ({unsigned long __ms=(n); while (__ms--) udelay(1000);})
+#ifndef __4XX_PCIE_H
+#define __4XX_PCIE_H
 
 #define DCRN_SDR0_CFGADDR	0x00e
 #define DCRN_SDR0_CFGDATA	0x00f
 
+#if defined(CONFIG_440SPE)
+#define CFG_PCIE_NR_PORTS	3
+
+#define CFG_PCIE_ADDR_HIGH	0x0000000d
+
 #define DCRN_PCIE0_BASE		0x100
 #define DCRN_PCIE1_BASE		0x120
 #define DCRN_PCIE2_BASE		0x140
+
+#define PCIE0_SDR		0x300
+#define PCIE1_SDR		0x340
+#define PCIE2_SDR		0x370
+#endif
+
+#if defined(CONFIG_405EX)
+#define CFG_PCIE_NR_PORTS	2
+
+#define CFG_PCIE_ADDR_HIGH	0x00000000
+
+#define	DCRN_PCIE0_BASE		0x040
+#define	DCRN_PCIE1_BASE		0x060
+
+#define PCIE0_SDR		0x400
+#define PCIE1_SDR		0x440
+#endif
+
 #define PCIE0			DCRN_PCIE0_BASE
 #define PCIE1			DCRN_PCIE1_BASE
 #define PCIE2			DCRN_PCIE2_BASE
@@ -47,6 +68,28 @@
 #define PESDR0_PLLLCT2		0x03a1
 #define PESDR0_PLLLCT3		0x03a2
 
+/* common regs, at least for 405EX and 440SPe */
+#define SDRN_PESDR_UTLSET1(n)		(sdr_base(n) + 0x00)
+#define SDRN_PESDR_UTLSET2(n)		(sdr_base(n) + 0x01)
+#define SDRN_PESDR_DLPSET(n)		(sdr_base(n) + 0x02)
+#define SDRN_PESDR_LOOP(n)		(sdr_base(n) + 0x03)
+#define SDRN_PESDR_RCSSET(n)		(sdr_base(n) + 0x04)
+#define SDRN_PESDR_RCSSTS(n)		(sdr_base(n) + 0x05)
+
+#if defined(CONFIG_440SPE)
+#define SDRN_PESDR_HSSL0SET1(n)		(sdr_base(n) + 0x06)
+#define SDRN_PESDR_HSSL0SET2(n)		(sdr_base(n) + 0x07)
+#define SDRN_PESDR_HSSL0STS(n)		(sdr_base(n) + 0x08)
+#define SDRN_PESDR_HSSL1SET1(n)		(sdr_base(n) + 0x09)
+#define SDRN_PESDR_HSSL1SET2(n)		(sdr_base(n) + 0x0a)
+#define SDRN_PESDR_HSSL1STS(n)		(sdr_base(n) + 0x0b)
+#define SDRN_PESDR_HSSL2SET1(n)		(sdr_base(n) + 0x0c)
+#define SDRN_PESDR_HSSL2SET2(n)		(sdr_base(n) + 0x0d)
+#define SDRN_PESDR_HSSL2STS(n)		(sdr_base(n) + 0x0e)
+#define SDRN_PESDR_HSSL3SET1(n)		(sdr_base(n) + 0x0f)
+#define SDRN_PESDR_HSSL3SET2(n)		(sdr_base(n) + 0x10)
+#define SDRN_PESDR_HSSL3STS(n)		(sdr_base(n) + 0x11)
+
 #define PESDR0_UTLSET1		0x0300
 #define PESDR0_UTLSET2		0x0301
 #define PESDR0_DLPSET		0x0302
@@ -123,9 +166,44 @@
 #define PESDR2_HSSCTLSET	0x0382
 #define PESDR2_LANE_ABCD	0x0383
 
+#elif defined(CONFIG_405EX)
+
+#define SDRN_PESDR_PHYSET1(n)		(sdr_base(n) + 0x06)
+#define SDRN_PESDR_PHYSET2(n)		(sdr_base(n) + 0x07)
+#define SDRN_PESDR_BIST(n)		(sdr_base(n) + 0x08)
+#define SDRN_PESDR_LPB(n)		(sdr_base(n) + 0x0b)
+#define SDRN_PESDR_PHYSTA(n)		(sdr_base(n) + 0x0c)
+
+#define PESDR0_UTLSET1		0x0400
+#define PESDR0_UTLSET2		0x0401
+#define PESDR0_DLPSET		0x0402
+#define PESDR0_LOOP		0x0403
+#define PESDR0_RCSSET		0x0404
+#define PESDR0_RCSSTS		0x0405
+#define PESDR0_PHYSET1		0x0406
+#define PESDR0_PHYSET2		0x0407
+#define PESDR0_BIST		0x0408
+#define PESDR0_LPB		0x040B
+#define PESDR0_PHYSTA		0x040C
+
+#define PESDR1_UTLSET1		0x0440
+#define PESDR1_UTLSET2		0x0441
+#define PESDR1_DLPSET		0x0442
+#define PESDR1_LOOP		0x0443
+#define PESDR1_RCSSET		0x0444
+#define PESDR1_RCSSTS		0x0445
+#define PESDR1_PHYSET1		0x0446
+#define PESDR1_PHYSET2		0x0447
+#define PESDR1_BIST		0x0448
+#define PESDR1_LPB		0x044B
+#define PESDR1_PHYSTA		0x044C
+
+#endif
+
 /*
  * UTL register offsets
  */
+#define	PEUTL_PBCTL		0x00
 #define PEUTL_PBBSZ		0x20
 #define PEUTL_OPDBSZ		0x68
 #define PEUTL_IPHBSZ		0x70
@@ -133,6 +211,7 @@
 #define PEUTL_OUTTR		0x90
 #define PEUTL_INTR		0x98
 #define PEUTL_PCTL		0xa0
+#define	PEUTL_RCSTA		0xb0
 #define PEUTL_RCIRQEN		0xb8
 
 /*
@@ -141,7 +220,8 @@
 #define PECFG_BAR0LMPA		0x210
 #define PECFG_BAR0HMPA		0x214
 #define PECFG_BAR1MPA		0x218
-#define PECFG_BAR2MPA		0x220
+#define PECFG_BAR2LMPA		0x220
+#define PECFG_BAR2HMPA		0x224
 
 #define PECFG_PIMEN		0x33c
 #define PECFG_PIM0LAL		0x340
@@ -164,11 +244,93 @@
 
 #define GPL_DMER_MASK_DISA	0x02000000
 
-int ppc440spe_init_pcie(void);
-int ppc440spe_init_pcie_rootport(int port);
-void yucca_setup_pcie_fpga_rootpoint(int port);
-void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port);
-int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port);
-int yucca_pcie_card_present(int port);
+#define U64_TO_U32_LOW(val)	((u32)((val) & 0x00000000ffffffffULL))
+#define U64_TO_U32_HIGH(val)	((u32)((val) >> 32))
+
+/*
+ * Prototypes
+ */
+int ppc4xx_init_pcie(void);
+int ppc4xx_init_pcie_rootport(int port);
+int ppc4xx_init_pcie_endport(int port);
+void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port);
+int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port);
 int pcie_hose_scan(struct pci_controller *hose, int bus);
-#endif /* __440SPE_PCIE_H */
+
+/*
+ * Function to determine root port or endport from env variable.
+ */
+static inline int is_end_point(int port)
+{
+	char s[10], *tk;
+	char *pcie_mode = getenv("pcie_mode");
+
+	if (pcie_mode == NULL)
+		return 0;
+
+	strcpy(s, pcie_mode);
+	tk = strtok(s, ":");
+
+	switch (port) {
+	case 0:
+		if (tk != NULL) {
+			if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
+				return 1;
+			else
+				return 0;
+		}
+		else
+			return 0;
+
+	case 1:
+		tk = strtok(NULL, ":");
+		if (tk != NULL) {
+			if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
+				return 1;
+			else
+				return 0;
+		}
+		else
+			return 0;
+
+	case 2:
+		tk = strtok(NULL, ":");
+		if (tk != NULL)
+			tk = strtok(NULL, ":");
+		if (tk != NULL) {
+			if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
+				return 1;
+			else
+				return 0;
+		}
+		else
+			return 0;
+	}
+
+	return 0;
+}
+
+static inline void mdelay(int n)
+{
+	u32 ms = n;
+
+	while (ms--)
+		udelay(1000);
+}
+
+static inline u32 sdr_base(int port)
+{
+	switch (port) {
+	default:	/* to satisfy compiler */
+	case 0:
+		return PCIE0_SDR;
+	case 1:
+		return PCIE1_SDR;
+#if CFG_PCIE_NR_PORTS > 2
+	case 2:
+		return PCIE2_SDR;
+#endif
+	}
+}
+
+#endif /* __4XX_PCIE_H */
diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h
index 5befab4d5..e29bfc2a7 100644
--- a/include/asm-ppc/cache.h
+++ b/include/asm-ppc/cache.h
@@ -8,15 +8,24 @@
 #include <asm/processor.h>
 
 /* bytes per L1 cache line */
-#if !defined(CONFIG_8xx) || defined(CONFIG_8260)
+#if !(defined(CONFIG_8xx) || defined(CONFIG_IOP480))
 #if defined(CONFIG_PPC64BRIDGE)
-#define L1_CACHE_BYTES	128
+#define L1_CACHE_SHIFT	7
 #else
-#define	L1_CACHE_BYTES  32
+#define	L1_CACHE_SHIFT	5
 #endif /* PPC64 */
 #else
-#define	L1_CACHE_BYTES	16
-#endif /* !8xx || 8260 */
+#define	L1_CACHE_SHIFT	4
+#endif /* !(8xx || IOP480) */
+
+#define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
+
+/*
+ * For compatibility reasons support the CFG_CACHELINE_SIZE too
+ */
+#ifndef CFG_CACHELINE_SIZE
+#define CFG_CACHELINE_SIZE	L1_CACHE_BYTES
+#endif
 
 #define	L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
 #define	L1_CACHE_PAGES		8
@@ -35,6 +44,8 @@
 extern void flush_dcache_range(unsigned long start, unsigned long stop);
 extern void clean_dcache_range(unsigned long start, unsigned long stop);
 extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache(void);
+extern void invalidate_dcache(void);
 #ifdef CFG_INIT_RAM_LOCK
 extern void unlock_ram_in_cache(void);
 #endif /* CFG_INIT_RAM_LOCK */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 4676e2c40..05aee7494 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -107,6 +107,9 @@ typedef	struct	global_data {
 	unsigned int	dp_alloc_base;
 	unsigned int	dp_alloc_top;
 #endif
+#if defined(CONFIG_4xx)
+	u32  uart_clk;
+#endif /* CONFIG_4xx */
 #if defined(CFG_GT_6426x)
 	unsigned int	mirror_hack[16];
 #endif
diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h
index c9b6a36b4..d0c3eba88 100644
--- a/include/asm-ppc/gpio.h
+++ b/include/asm-ppc/gpio.h
@@ -21,6 +21,9 @@
  * MA 02111-1307 USA
  */
 
+#ifndef __ASM_PPC_GPIO_H
+#define __ASM_PPC_GPIO_H
+
 /* 4xx PPC's have 2 GPIO controllers */
 #if defined(CONFIG_405EZ) ||					\
 	defined(CONFIG_440EP) || defined(CONFIG_440GR) ||	\
@@ -30,6 +33,36 @@
 #define GPIO_GROUP_MAX	1
 #endif
 
+/* Offsets */
+#define GPIOx_OR	0x00		/* GPIO Output Register */
+#define GPIOx_TCR	0x04		/* GPIO Three-State Control Register */
+#define GPIOx_OSL	0x08		/* GPIO Output Select Register (Bits 0-31) */
+#define GPIOx_OSH	0x0C		/* GPIO Ouput Select Register (Bits 32-63) */
+#define GPIOx_TSL	0x10		/* GPIO Three-State Select Register (Bits 0-31) */
+#define GPIOx_TSH	0x14		/* GPIO Three-State Select Register  (Bits 32-63) */
+#define GPIOx_ODR	0x18		/* GPIO Open drain Register */
+#define GPIOx_IR	0x1C		/* GPIO Input Register */
+#define GPIOx_RR1	0x20		/* GPIO Receive Register 1 */
+#define GPIOx_RR2	0x24		/* GPIO Receive Register 2 */
+#define GPIOx_RR3	0x28		/* GPIO Receive Register 3 */
+#define GPIOx_IS1L	0x30		/* GPIO Input Select Register 1 (Bits 0-31) */
+#define GPIOx_IS1H	0x34		/* GPIO Input Select Register 1 (Bits 32-63) */
+#define GPIOx_IS2L	0x38		/* GPIO Input Select Register 2 (Bits 0-31) */
+#define GPIOx_IS2H	0x3C		/* GPIO Input Select Register 2 (Bits 32-63) */
+#define GPIOx_IS3L	0x40		/* GPIO Input Select Register 3 (Bits 0-31) */
+#define GPIOx_IS3H	0x44		/* GPIO Input Select Register 3 (Bits 32-63) */
+
+#define GPIO_OR(x)	(x+GPIOx_OR)	/* GPIO Output Register */
+#define GPIO_TCR(x)	(x+GPIOx_TCR)	/* GPIO Three-State Control Register */
+#define GPIO_OS(x)	(x+GPIOx_OSL)	/* GPIO Output Select Register High or Low */
+#define GPIO_TS(x)	(x+GPIOx_TSL)	/* GPIO Three-state Control Reg High or Low */
+#define GPIO_IS1(x)	(x+GPIOx_IS1L)	/* GPIO Input register1 High or Low */
+#define GPIO_IS2(x)	(x+GPIOx_IS2L)	/* GPIO Input register2 High or Low */
+#define GPIO_IS3(x)	(x+GPIOx_IS3L)	/* GPIO Input register3 High or Low */
+
+#define GPIO0		0
+#define GPIO1		1
+
 #define GPIO_MAX	32
 #define GPIO_ALT1_SEL	0x40000000
 #define GPIO_ALT2_SEL	0x80000000
@@ -56,3 +89,5 @@ void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
 void gpio_write_bit(int pin, int val);
 int gpio_read_out_bit(int pin);
 void gpio_set_chip_configuration(void);
+
+#endif /* __ASM_PPC_GPIO_H */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 496fc72da..d769d7012 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -720,11 +720,10 @@ typedef struct ccsr_tsec {
 } ccsr_tsec_t;
 
 /*
- * PIC Registers(0x2_6000-0x4_0000-0x8_0000)
+ * PIC Registers(0x4_0000-0x8_0000)
  */
 typedef struct ccsr_pic {
-	char 	res0[106496];	/* 0x26000-0x40000 */
-	char	res1[64];
+	char	res1[64];	/* 0x40000 */
 	uint	ipidr0;		/* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */
 	char	res2[12];
 	uint	ipidr1;		/* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */
@@ -1619,25 +1618,25 @@ typedef struct ccsr_gur {
 
 #define PORDEVSR_PCI	(0x00800000)	/* PCI Mode */
 
-typedef struct immap {
-	ccsr_local_ecm_t	im_local_ecm;
-	ccsr_ddr_t		im_ddr;
-	ccsr_i2c_t		im_i2c;
-	ccsr_duart_t		im_duart;
-	ccsr_lbc_t		im_lbc;
-	ccsr_pcix_t		im_pcix;
-	ccsr_pcix_t		im_pcix2;
-	char			reserved[90112];
-	ccsr_l2cache_t		im_l2cache;
-	ccsr_dma_t		im_dma;
-	ccsr_tsec_t		im_tsec1;
-	ccsr_tsec_t		im_tsec2;
-	ccsr_pic_t		im_pic;
-	ccsr_cpm_t		im_cpm;
-	ccsr_rio_t		im_rio;
-	ccsr_gur_t		im_gur;
-} immap_t;
-
-extern immap_t  *immr;
+#define CFG_MPC85xx_GUTS_OFFSET	(0xE0000)
+#define CFG_MPC85xx_GUTS_ADDR	(CFG_IMMR + CFG_MPC85xx_GUTS_OFFSET)
+#define CFG_MPC85xx_ECM_OFFSET	(0x0000)
+#define CFG_MPC85xx_ECM_ADDR	(CFG_IMMR + CFG_MPC85xx_ECM_OFFSET)
+#define CFG_MPC85xx_DDR_OFFSET	(0x2000)
+#define CFG_MPC85xx_DDR_ADDR	(CFG_IMMR + CFG_MPC85xx_DDR_OFFSET)
+#define CFG_MPC85xx_LBC_OFFSET	(0x5000)
+#define CFG_MPC85xx_LBC_ADDR	(CFG_IMMR + CFG_MPC85xx_LBC_OFFSET)
+#define CFG_MPC85xx_PCIX_OFFSET	(0x8000)
+#define CFG_MPC85xx_PCIX_ADDR	(CFG_IMMR + CFG_MPC85xx_PCIX_OFFSET)
+#define CFG_MPC85xx_PCIX2_OFFSET	(0x9000)
+#define CFG_MPC85xx_PCIX2_ADDR	(CFG_IMMR + CFG_MPC85xx_PCIX2_OFFSET)
+#define CFG_MPC85xx_L2_OFFSET	(0x20000)
+#define CFG_MPC85xx_L2_ADDR	(CFG_IMMR + CFG_MPC85xx_L2_OFFSET)
+#define CFG_MPC85xx_DMA_OFFSET	(0x21000)
+#define CFG_MPC85xx_DMA_ADDR	(CFG_IMMR + CFG_MPC85xx_DMA_OFFSET)
+#define CFG_MPC85xx_PIC_OFFSET	(0x40000)
+#define CFG_MPC85xx_PIC_ADDR	(CFG_IMMR + CFG_MPC85xx_PIC_OFFSET)
+#define CFG_MPC85xx_CPM_OFFSET	(0x80000)
+#define CFG_MPC85xx_CPM_ADDR	(CFG_IMMR + CFG_MPC85xx_CPM_OFFSET)
 
 #endif /*__IMMAP_85xx__*/
diff --git a/include/asm-ppc/immap_fsl_pci.h b/include/asm-ppc/immap_fsl_pci.h
index bd732b668..6715064c9 100644
--- a/include/asm-ppc/immap_fsl_pci.h
+++ b/include/asm-ppc/immap_fsl_pci.h
@@ -144,7 +144,9 @@ typedef struct ccsr_pci {
 	u32	perr_cap1;	/* 0xe2c - PCIE Error Capture Register 1 */
 	u32	perr_cap2;	/* 0xe30 - PCIE Error Capture Register 2 */
 	u32	perr_cap3;	/* 0xe34 - PCIE Error Capture Register 3 */
-	char	res23[456];	/*     (- #x1000 #xe38) 456 */
+	char	res23[200];
+	u32	pdb_stat;	/* 0xf00 - PCIE Debug Status */
+	char	res24[252];
 } ccsr_fsl_pci_t;
 
 #endif /*__IMMAP_fsl_pci__*/
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 11dfa1c57..91c9c1e4c 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -121,13 +121,43 @@ static inline void isync(void)
 #define iobarrier_w()  eieio()
 
 /*
+ * Non ordered and non-swapping "raw" accessors
+ */
+#define __iomem
+#define PCI_FIX_ADDR(addr)	(addr)
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+	*(volatile unsigned char *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+	*(volatile unsigned short *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+	*(volatile unsigned int *)PCI_FIX_ADDR(addr) = v;
+}
+
+/*
  * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
  *
  * Read operations have additional twi & isync to make sure the read
  * is actually performed (i.e. the data has come back) before we start
  * executing any following instructions.
  */
-#define __iomem
 extern inline int in_8(const volatile unsigned char __iomem *addr)
 {
 	int ret;
@@ -208,4 +238,30 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 	__asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
 #endif
diff --git a/include/asm-ppc/iopin_85xx.h b/include/asm-ppc/iopin_85xx.h
index f854df633..daddb554d 100644
--- a/include/asm-ppc/iopin_85xx.h
+++ b/include/asm-ppc/iopin_85xx.h
@@ -23,121 +23,121 @@ typedef struct {
 
 extern __inline__ void iopin_set_high (iopin_t * iopin)
 {
-	volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_low (iopin_t * iopin)
 {
-	volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_high (iopin_t * iopin)
 {
-	volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_low (iopin_t * iopin)
 {
-	volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_out (iopin_t * iopin)
 {
-	volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_in (iopin_t * iopin)
 {
-	volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_out (iopin_t * iopin)
 {
-	volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_in (iopin_t * iopin)
 {
-	volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_odr (iopin_t * iopin)
 {
-	volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_act (iopin_t * iopin)
 {
-	volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_odr (iopin_t * iopin)
 {
-	volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_act (iopin_t * iopin)
 {
-	volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_ded (iopin_t * iopin)
 {
-	volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_gen (iopin_t * iopin)
 {
-	volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_ded (iopin_t * iopin)
 {
-	volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_gen (iopin_t * iopin)
 {
-	volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_opt2 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_opt1 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_opt2 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_opt1 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index b3cfa9b37..b19abe73a 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -413,7 +413,9 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define LAWAR_TRGT_IF_PCI1	0x00000000
 #define LAWAR_TRGT_IF_PCIX	0x00000000
 #define LAWAR_TRGT_IF_PCI2	0x00100000
-#define LAWAR_TRGT_IF_PEX	0x00200000
+#define LAWAR_TRGT_IF_PCIE1	0x00200000
+#define LAWAR_TRGT_IF_PCIE2	0x00100000
+#define LAWAR_TRGT_IF_PCIE3	0x00300000
 #define LAWAR_TRGT_IF_LBC	0x00400000
 #define LAWAR_TRGT_IF_CCSR	0x00800000
 #define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
@@ -648,6 +650,7 @@ unsigned long mftlb3(unsigned long index);
 
 void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
 void remove_tlb(u32 vaddr, u32 size);
+void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value);
 #endif /* __ASSEMBLY__ */
 
 #endif /* CONFIG_440 */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 0a160e251..9fbbdf8c5 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -91,6 +91,11 @@
 
 /* Special Purpose Registers (SPRNs)*/
 
+/* PPC440 Architecture is BOOK-E */
+#ifdef CONFIG_440
+#define CONFIG_BOOKE
+#endif
+
 #define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
 #define SPRN_CTR	0x009	/* Count Register */
 #define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
@@ -765,6 +770,10 @@
 #define PVR_405EP_RA	0x51210950
 #define PVR_405GPR_RB	0x50910951
 #define PVR_405EZ_RA	0x41511460
+#define PVR_405EXR1_RA	0x12911473 /* 405EXr rev A with Security */
+#define PVR_405EXR2_RA	0x12911471 /* 405EXr rev A without Security */
+#define PVR_405EX1_RA	0x12911477 /* 405EX rev A with Security */
+#define PVR_405EX2_RA	0x12911475 /* 405EX rev A without Security */
 #define PVR_440GP_RB	0x40120440
 #define PVR_440GP_RC	0x40120481
 #define PVR_440EP_RA	0x42221850
@@ -875,6 +884,7 @@
 #define SVR_8544_E	0x803C
 #define SVR_8548	0x8031
 #define SVR_8548_E	0x8039
+#define SVR_8610	0x80A0
 #define SVR_8641	0x8090
 #define SVR_8568_E	0x807D
 
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 464f6b575..bd9b6f70d 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -84,6 +84,7 @@ typedef struct bd_info {
     defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || \
     defined(CONFIG_405EZ) || \
+    defined(CONFIG_405EX) || \
     defined(CONFIG_440)
 	unsigned char	bi_s_version[4];	/* Version of this structure */
 	unsigned char	bi_r_version[32];	/* Version of the ROM (AMCC) */
diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h
new file mode 100644
index 000000000..410fba46e
--- /dev/null
+++ b/include/asm-sh/bitops.h
@@ -0,0 +1,151 @@
+#ifndef __ASM_SH_BITOPS_H
+#define __ASM_SH_BITOPS_H
+
+#ifdef __KERNEL__
+#include <asm/irqflags.h>
+/* For __swab32 */
+#include <asm/byteorder.h>
+
+static inline void set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a |= mask;
+	local_irq_restore(flags);
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+static inline void clear_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a ^= mask;
+	local_irq_restore(flags);
+}
+
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bt/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+
+/**
+ * ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline int ffs (int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_BITOPS_H */
diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h
new file mode 100644
index 000000000..25626a076
--- /dev/null
+++ b/include/asm-sh/byteorder.h
@@ -0,0 +1,30 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_SH_BYTEORDER_H_
+#define __ASM_SH_BYTEORDER_H_
+
+#include <config.h>
+#include <asm/types.h>
+
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif
diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h
new file mode 100644
index 000000000..265803956
--- /dev/null
+++ b/include/asm-sh/cpu_sh4.h
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH4_H_
+#define _ASM_CPU_SH4_H_
+
+/* cache control */
+#define CCR_CACHE_STOP   0x00000808
+#define CCR_CACHE_ENABLE 0x00000101
+#define CCR_CACHE_ICI    0x00000800
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf4000000
+#define CACHE_OC_WAY_SHIFT	14
+#define CACHE_OC_NUM_ENTRIES	512
+#define CACHE_OC_ENTRY_SHIFT	5
+
+#if defined (CONFIG_CPU_SH7750)
+#include <asm/cpu_sh7750.h>
+#elif defined (CONFIG_CPU_SH7722)
+#include <asm/cpu_sh7722.h>
+#else
+#error "Unknown SH4 variant"
+#endif
+
+#endif	/* _ASM_CPU_SH4_H_ */
diff --git a/include/asm-sh/cpu_sh7722.h b/include/asm-sh/cpu_sh7722.h
new file mode 100644
index 000000000..13d4a77ed
--- /dev/null
+++ b/include/asm-sh/cpu_sh7722.h
@@ -0,0 +1,1337 @@
+/*
+ * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * SH7722 Internal I/O register
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH7722_H_
+#define _ASM_CPU_SH7722_H_
+
+#define CACHE_OC_NUM_WAYS	4
+#define CCR_CACHE_INIT	0x0000090d
+
+/*	EXP	*/
+#define TRA		0xFF000020
+#define EXPEVT		0xFF000024
+#define INTEVT		0xFF000028
+
+/*	MMU	*/
+#define PTEH		0xFF000000
+#define PTEL		0xFF000004
+#define TTB		0xFF000008
+#define TEA		0xFF00000C
+#define MMUCR		0xFF000010
+#define PASCR		0xFF000070
+#define IRMCR		0xFF000078
+
+/*	CACHE	*/
+#define CCR		0xFF00001C
+#define RAMCR		0xFF000074
+
+/*	XY MEMORY	*/
+#define XSA		0xFF000050
+#define YSA		0xFF000054
+#define XDA		0xFF000058
+#define YDA		0xFF00005C
+#define XPR		0xFF000060
+#define YPR		0xFF000064
+#define XEA		0xFF000068
+#define YEA		0xFF00006C
+
+/*	INTC	*/
+#define ICR0		0xA4140000
+#define ICR1		0xA414001C
+#define INTPRI0		0xA4140010
+#define INTREQ0		0xA4140024
+#define INTMSK0		0xA4140044
+#define INTMSKCLR0	0xA4140064
+#define NMIFCR		0xA41400C0
+#define USERIMASK	0xA4700000
+#define IPRA		0xA4080000
+#define IPRB		0xA4080004
+#define IPRC		0xA4080008
+#define IPRD		0xA408000C
+#define IPRE		0xA4080010
+#define IPRF		0xA4080014
+#define IPRG		0xA4080018
+#define IPRH		0xA408001C
+#define IPRI		0xA4080020
+#define IPRJ		0xA4080024
+#define IPRK		0xA4080028
+#define IPRL		0xA408002C
+#define IMR0		0xA4080080
+#define IMR1		0xA4080084
+#define IMR2		0xA4080088
+#define IMR3		0xA408008C
+#define IMR4		0xA4080090
+#define IMR5		0xA4080094
+#define IMR6		0xA4080098
+#define IMR7		0xA408009C
+#define IMR8		0xA40800A0
+#define IMR9		0xA40800A4
+#define IMR10		0xA40800A8
+#define IMR11		0xA40800AC
+#define IMCR0		0xA40800C0
+#define IMCR1		0xA40800C4
+#define IMCR2		0xA40800C8
+#define IMCR3		0xA40800CC
+#define IMCR4		0xA40800D0
+#define IMCR5		0xA40800D4
+#define IMCR6		0xA40800D8
+#define IMCR7		0xA40800DC
+#define IMCR8		0xA40800E0
+#define IMCR9		0xA40800E4
+#define IMCR10		0xA40800E8
+#define IMCR11		0xA40800EC
+#define MFI_IPRA	0xA40B0000
+#define MFI_IPRB	0xA40B0004
+#define MFI_IPRC	0xA40B0008
+#define MFI_IPRD	0xA40B000C
+#define MFI_IPRE	0xA40B0010
+#define MFI_IPRF	0xA40B0014
+#define MFI_IPRG	0xA40B0018
+#define MFI_IPRH	0xA40B001C
+#define MFI_IPRI	0xA40B0020
+#define MFI_IPRJ	0xA40B0024
+#define MFI_IPRK	0xA40B0028
+#define MFI_IPRL	0xA40B002C
+#define MFI_IMR0	0xA40B0080
+#define MFI_IMR1	0xA40B0084
+#define MFI_IMR2	0xA40B0088
+#define MFI_IMR3	0xA40B008C
+#define MFI_IMR4	0xA40B0090
+#define MFI_IMR5	0xA40B0094
+#define MFI_IMR6	0xA40B0098
+#define MFI_IMR7	0xA40B009C
+#define MFI_IMR8	0xA40B00A0
+#define MFI_IMR9	0xA40B00A4
+#define MFI_IMR10	0xA40B00A8
+#define MFI_IMR11	0xA40B00AC
+#define MFI_IMCR0	0xA40B00C0
+#define MFI_IMCR1	0xA40B00C4
+#define MFI_IMCR2	0xA40B00C8
+#define MFI_IMCR3	0xA40B00CC
+#define MFI_IMCR4	0xA40B00D0
+#define MFI_IMCR5	0xA40B00D4
+#define MFI_IMCR6	0xA40B00D8
+#define MFI_IMCR7	0xA40B00DC
+#define MFI_IMCR8	0xA40B00E0
+#define MFI_IMCR9	0xA40B00E4
+#define MFI_IMCR10	0xA40B00E8
+#define MFI_IMCR11	0xA40B00EC
+
+/*	BSC	*/
+#define CMNCR	    0xFEC10000
+#define	CS0BCR	    0xFEC10004
+#define CS2BCR      0xFEC10008
+#define CS4BCR      0xFEC10010
+#define CS5ABCR     0xFEC10014
+#define CS5BBCR     0xFEC10018
+#define CS6ABCR     0xFEC1001C
+#define CS6BBCR     0xFEC10020
+#define CS0WCR      0xFEC10024
+#define CS2WCR      0xFEC10028
+#define CS4WCR      0xFEC10030
+#define CS5AWCR     0xFEC10034
+#define CS5BWCR     0xFEC10038
+#define CS6AWCR     0xFEC1003C
+#define CS6BWCR     0xFEC10040
+#define RBWTCNT     0xFEC10054
+
+/*	SBSC	*/
+#define SBSC_SDCR   0xFE400008
+#define SBSC_SDWCR  0xFE40000C
+#define SBSC_SDPCR  0xFE400010
+#define SBSC_RTCSR  0xFE400014
+#define SBSC_RTCNT  0xFE400018
+#define SBSC_RTCOR  0xFE40001C
+#define SBSC_RFCR   0xFE400020
+
+/*	DMAC	*/
+#define SAR_0       0xFE008020
+#define DAR_0       0xFE008024
+#define TCR_0       0xFE008028
+#define CHCR_0      0xFE00802C
+#define SAR_1       0xFE008030
+#define DAR_1       0xFE008034
+#define TCR_1       0xFE008038
+#define CHCR_1      0xFE00803C
+#define SAR_2       0xFE008040
+#define DAR_2       0xFE008044
+#define TCR_2       0xFE008048
+#define CHCR_2      0xFE00804C
+#define SAR_3       0xFE008050
+#define DAR_3       0xFE008054
+#define TCR_3       0xFE008058
+#define CHCR_3      0xFE00805C
+#define SAR_4       0xFE008070
+#define DAR_4       0xFE008074
+#define TCR_4       0xFE008078
+#define CHCR_4      0xFE00807C
+#define SAR_5       0xFE008080
+#define DAR_5       0xFE008084
+#define TCR_5       0xFE008088
+#define CHCR_5      0xFE00808C
+#define SARB_0      0xFE008120
+#define DARB_0      0xFE008124
+#define TCRB_0      0xFE008128
+#define SARB_1      0xFE008130
+#define DARB_1      0xFE008134
+#define TCRB_1      0xFE008138
+#define SARB_2      0xFE008140
+#define DARB_2      0xFE008144
+#define TCRB_2      0xFE008148
+#define SARB_3      0xFE008150
+#define DARB_3      0xFE008154
+#define TCRB_3      0xFE008158
+#define DMAOR       0xFE008060
+#define DMARS_0     0xFE009000
+#define DMARS_1     0xFE009004
+#define DMARS_2     0xFE009008
+
+/*	CPG	*/
+#define FRQCR       0xA4150000
+#define VCLKCR      0xA4150004
+#define SCLKACR     0xA4150008
+#define SCLKBCR     0xA415000C
+#define PLLCR       0xA4150024
+#define DLLFRQ      0xA4150050
+
+/*	LOW POWER MODE	*/
+#define STBCR       0xA4150020
+#define MSTPCR0     0xA4150030
+#define MSTPCR1     0xA4150034
+#define MSTPCR2     0xA4150038
+#define BAR         0xA4150040
+
+/*	RWDT	*/
+#define RWTCNT      0xA4520000
+#define RWTCSR      0xA4520004
+#define WTCNT	RWTCNT
+
+
+/*	TMU	*/
+#define TSTR        0xFFD80004
+#define TCOR0       0xFFD80008
+#define TCNT0       0xFFD8000C
+#define TCR0        0xFFD80010
+#define TCOR1       0xFFD80014
+#define TCNT1       0xFFD80018
+#define TCR1        0xFFD8001C
+#define TCOR2       0xFFD80020
+#define TCNT2       0xFFD80024
+#define TCR2        0xFFD80028
+
+/*	TPU	*/
+#define TPU_TSTR    0xA4C90000
+#define TPU_TCR0    0xA4C90010
+#define TPU_TMDR0   0xA4C90014
+#define TPU_TIOR0   0xA4C90018
+#define TPU_TIER0   0xA4C9001C
+#define TPU_TSR0    0xA4C90020
+#define TPU_TCNT0   0xA4C90024
+#define TPU_TGR0A   0xA4C90028
+#define TPU_TGR0B   0xA4C9002C
+#define TPU_TGR0C   0xA4C90030
+#define TPU_TGR0D   0xA4C90034
+#define TPU_TCR1    0xA4C90050
+#define TPU_TMDR1   0xA4C90054
+#define TPU_TIER1   0xA4C9005C
+#define TPU_TSR1    0xA4C90060
+#define TPU_TCNT1   0xA4C90064
+#define TPU_TGR1A   0xA4C90068
+#define TPU_TGR1B   0xA4C9006C
+#define TPU_TGR1C   0xA4C90070
+#define TPU_TGR1D   0xA4C90074
+#define TPU_TCR2    0xA4C90090
+#define TPU_TMDR2   0xA4C90094
+#define TPU_TIER2   0xA4C9009C
+#define TPU_TSR2    0xA4C900A0
+#define TPU_TCNT2   0xA4C900A4
+#define TPU_TGR2A   0xA4C900A8
+#define TPU_TGR2B   0xA4C900AC
+#define TPU_TGR2C   0xA4C900B0
+#define TPU_TGR2D   0xA4C900B4
+#define TPU_TCR3    0xA4C900D0
+#define TPU_TMDR3   0xA4C900D4
+#define TPU_TIER3   0xA4C900DC
+#define TPU_TSR3    0xA4C900E0
+#define TPU_TCNT3   0xA4C900E4
+#define TPU_TGR3A   0xA4C900E8
+#define TPU_TGR3B   0xA4C900EC
+#define TPU_TGR3C   0xA4C900F0
+#define TPU_TGR3D   0xA4C900F4
+
+/*	CMT	*/
+#define CMSTR       0xA44A0000
+#define CMCSR       0xA44A0060
+#define CMCNT       0xA44A0064
+#define CMCOR       0xA44A0068
+
+/*	SIO	*/
+#define SIOMDR      0xA4500000
+#define SIOCTR      0xA4500004
+#define SIOSTBCR0   0xA4500008
+#define SIOSTBCR1   0xA450000C
+#define SIOTDR      0xA4500014
+#define SIORDR      0xA4500018
+#define SIOSTR      0xA450001C
+#define SIOIER      0xA4500020
+#define SIOSCR      0xA4500024
+
+/*	SIOF	*/
+#define SIMDR0      0xA4410000
+#define SISCR0      0xA4410002
+#define SITDAR0     0xA4410004
+#define SIRDAR0     0xA4410006
+#define SICDAR0     0xA4410008
+#define SICTR0      0xA441000C
+#define SIFCTR0     0xA4410010
+#define SISTR0      0xA4410014
+#define SIIER0      0xA4410016
+#define SITDR0      0xA4410020
+#define SIRDR0      0xA4410024
+#define SITCR0      0xA4410028
+#define SIRCR0      0xA441002C
+#define SPICR0      0xA4410030
+#define SIMDR1      0xA4420000
+#define SISCR1      0xA4420002
+#define SITDAR1     0xA4420004
+#define SIRDAR1     0xA4420006
+#define SICDAR1     0xA4420008
+#define SICTR1      0xA442000C
+#define SIFCTR1     0xA4420010
+#define SISTR1      0xA4420014
+#define SIIER1      0xA4420016
+#define SITDR1      0xA4420020
+#define SIRDR1      0xA4420024
+#define SITCR1      0xA4420028
+#define SIRCR1      0xA442002C
+#define SPICR1      0xA4420030
+
+/*	SCIF	*/
+/*
+#define SCSMR       0xFFE00000
+#define SCBRR       0xFFE00004
+#define SCSCR       0xFFE00008
+#define SCFTDR      0xFFE0000C
+#define SCFSR       0xFFE00010
+#define SCFRDR      0xFFE00014
+#define SCFCR       0xFFE00018
+#define SCFDR       0xFFE0001C
+#define SCLSR       0xFFE00024
+#define SCSMR1      0xFFE10000
+#define SCBRR1      0xFFE10004
+#define SCSCR1      0xFFE10008
+#define SCFTDR1     0xFFE1000C
+#define SCFSR1      0xFFE10010
+#define SCFRDR1     0xFFE10014
+#define SCFCR1      0xFFE10018
+#define SCFDR1      0xFFE1001C
+#define SCLSR1      0xFFE10024
+#define SCSMR2      0xFFE20000
+#define SCBRR2      0xFFE20004
+#define SCSCR2      0xFFE20008
+#define SCFTDR2     0xFFE2000C
+#define SCFSR2      0xFFE20010
+#define SCFRDR2     0xFFE20014
+#define SCFCR2      0xFFE20018
+#define SCFDR2      0xFFE2001C
+#define SCLSR2      0xFFE20024
+#define SCSMR3      0xFFE30000
+#define SCBRR3      0xFFE30004
+#define SCSCR3      0xFFE30008
+#define SCFTDR3     0xFFE3000C
+#define SCFSR3      0xFFE30010
+#define SCFRDR3     0xFFE30014
+#define SCFCR3      0xFFE30018
+#define SCFDR3      0xFFE3001C
+#define SCLSR3      0xFFE30024
+*/
+#define SCIF0_BASE  0xFFE00000
+
+/*	SIM	*/
+#define SIM_SCSMR       0xA4490000
+#define SIM_SCBRR       0xA4490002
+#define SIM_SCSCR       0xA4490004
+#define SIM_SCTDR       0xA4490006
+#define SIM_SCSSR       0xA4490008
+#define SIM_SCRDR       0xA449000A
+#define SIM_SCSCMR      0xA449000C
+#define SIM_SCSC2R      0xA449000E
+#define SIM_SCWAIT      0xA4490010
+#define SIM_SCGRD       0xA4490012
+#define SIM_SCSMPL      0xA4490014
+#define SIM_SCDMAEN     0xA4490016
+
+/*	IrDA	*/
+#define IRIF_INIT1      0xA45D0012
+#define IRIF_INIT2      0xA45D0014
+#define IRIF_RINTCLR    0xA45D0016
+#define IRIF_TINTCLR    0xA45D0018
+#define IRIF_SIR0       0xA45D0020
+#define IRIF_SIR1       0xA45D0022
+#define IRIF_SIR2       0xA45D0024
+#define IRIF_SIR3       0xA45D0026
+#define IRIF_SIR_FRM    0xA45D0028
+#define IRIF_SIR_EOF    0xA45D002A
+#define IRIF_SIR_FLG    0xA45D002C
+#define IRIF_SIR_STS2   0xA45D002E
+#define IRIF_UART0      0xA45D0030
+#define IRIF_UART1      0xA45D0032
+#define IRIF_UART2      0xA45D0034
+#define IRIF_UART3      0xA45D0036
+#define IRIF_UART4      0xA45D0038
+#define IRIF_UART5      0xA45D003A
+#define IRIF_UART6      0xA45D003C
+#define IRIF_UART7      0xA45D003E
+#define IRIF_CRC0       0xA45D0040
+#define IRIF_CRC1       0xA45D0042
+#define IRIF_CRC2       0xA45D0044
+#define IRIF_CRC3       0xA45D0046
+#define IRIF_CRC4       0xA45D0048
+
+/*	IIC	*/
+#define ICDR0       0xA4470000
+#define ICCR0       0xA4470004
+#define ICSR0       0xA4470008
+#define ICIC0       0xA447000C
+#define ICCL0       0xA4470010
+#define ICCH0       0xA4470014
+#define ICDR1       0xA4750000
+#define ICCR1       0xA4750004
+#define ICSR1       0xA4750008
+#define ICIC1       0xA475000C
+#define ICCL1       0xA4750010
+#define ICCH1       0xA4750014
+
+/*	FLCTL	*/
+#define FLCMNCR     0xA4530000
+#define FLCMDCR     0xA4530004
+#define FLCMCDR     0xA4530008
+#define FLADR       0xA453000C
+#define FLDATAR     0xA4530010
+#define FLDTCNTR    0xA4530014
+#define FLINTDMACR  0xA4530018
+#define FLBSYTMR    0xA453001C
+#define FLBSYCNT    0xA4530020
+#define FLDTFIFO    0xA4530024
+#define FLECFIFO    0xA4530028
+#define FLTRCR      0xA453002C
+#define FLADR2      0xA453003C
+
+/*	MFI	*/
+#define MFIIDX      0xA4C10000
+#define MFIGSR      0xA4C10004
+#define MFISCR      0xA4C10008
+#define MFIMCR      0xA4C1000C
+#define MFIIICR     0xA4C10010
+#define MFIEICR     0xA4C10014
+#define MFIADR      0xA4C10018
+#define MFIDATA     0xA4C1001C
+#define MFIRCR      0xA4C10020
+#define MFIINTEVT   0xA4C1002C
+#define MFIIMASK    0xA4C10030
+#define MFIBCR      0xA4C10040
+#define MFIADRW     0xA4C10044
+#define MFIADRR     0xA4C10048
+#define MFIDATAW    0xA4C1004C
+#define MFIDATAR    0xA4C10050
+#define MFIMCRW     0xA4C10054
+#define MFIMCRR     0xA4C10058
+#define MFIDNRW     0xA4C1005C
+#define MFIDNRR     0xA4C10060
+#define MFISIZEW    0xA4C10064
+#define MFISIZER    0xA4C10068
+#define MFIDEVCR    0xA4C10038
+#define MFISM4      0xA4C10080
+
+/*	VPU	*/
+#define VP4_CTRL        0xFE900000
+#define VP4_VOL_CTRL    0xFE900004
+#define VP4_IMAGE_SIZE  0xFE900008
+#define VP4_MB_NUM      0xFE90000C
+#define VP4_DWY_ADDR    0xFE900010
+#define VP4_DWC_ADDR    0xFE900014
+#define VP4_D2WY_ADDR   0xFE900018
+#define VP4_D2WC_ADDR   0xFE90001C
+#define VP4_DP1_ADDR    0xFE900020
+#define VP4_DP2_ADDR    0xFE900024
+#define VP4_STRS_ADDR   0xFE900028
+#define VP4_STRE_ADDR   0xFE90002C
+#define VP4_VOP_CTRL    0xFE900030
+#define VP4_VOP_TIME    0xFE900034
+#define VP4_263_CTRL    0xFE900038
+#define VP4_264_CTRL    0xFE90003C
+#define VP4_VLC_CTRL    0xFE900040
+#define VP4_ENDIAN      0xFE900044
+#define VP4_CMD         0xFE900048
+#define VP4_ME_TH1      0xFE90004C
+#define VP4_ME_TH2      0xFE900050
+#define VP4_ME_COSTMB   0xFE900054
+#define VP4_ME_SKIP     0xFE900058
+#define VP4_ME_CTRL     0xFE90005C
+#define VP4_MBRF_CTRL   0xFE900060
+#define VP4_MC_CTRL     0xFE900064
+#define VP4_PRED_CTRL   0xFE900068
+#define VP4_SLC_SIZE    0xFE90006C
+#define VP4_VOP_MINBIT  0xFE900070
+#define VP4_MB_MAXBIT   0xFE900074
+#define VP4_MB_TBIT     0xFE900078
+#define VP4_RCQNT       0xFE90007C
+#define VP4_RCRP        0xFE900080
+#define VP4_RCDJ        0xFE900084
+#define VP4_RCWQ        0xFE900088
+#define VP4_FWD_TIME    0xFE900094
+#define VP4_BWD_TIME    0xFE900098
+#define VP4_PST_TIME    0xFE90009C
+#define VP4_ILTFRAME    0xFE9000A0
+#define VP4_EC_REF      0xFE9000A4
+#define VP4_STATUS      0xFE900100
+#define VP4_IRQ_ENB     0xFE900104
+#define VP4_IRQ_STA     0xFE900108
+#define VP4_VOP_BIT     0xFE90010C
+#define VP4_PRV_BIT     0xFE900110
+#define VP4_SLC_MB      0xFE900114
+#define VP4_QSUM        0xFE900118
+#define VP4_DEC_ERR     0xFE90011C
+#define VP4_ERR_AREA    0xFE900120
+#define VP4_NEXT_CODE   0xFE900124
+#define VP4_MB_ATTR     0xFE900128
+#define VP4_DBMON       0xFE90012C
+#define VP4_DEBUG       0xFE900130
+#define VP4_ERR_DET     0xFE900134
+#define VP4_CLK_STOP    0xFE900138
+#define VP4_MB_SADA     0xFE90013C
+#define VP4_MB_SADR     0xFE900140
+#define VP4_MAT_RAM     0xFE901000
+#define VP4_NC_RAM      0xFE902000
+#define WT              0xFE9020CC
+#define VP4_CPY_ADDR    0xFE902264
+#define VP4_CPC_ADDR    0xFE902268
+#define VP4_R0Y_ADDR    0xFE90226C
+#define VP4_R0C_ADDR    0xFE902270
+#define VP4_R1Y_ADDR    0xFE902274
+#define VP4_R1C_ADDR    0xFE902278
+#define VP4_R2Y_ADDR    0xFE90227C
+#define VP4_R2C_ADDR    0xFE902280
+#define VP4_R3Y_ADDR    0xFE902284
+#define VP4_R3C_ADDR    0xFE902288
+#define VP4_R4Y_ADDR    0xFE90228C
+#define VP4_R4C_ADDR    0xFE902290
+#define VP4_R5Y_ADDR    0xFE902294
+#define VP4_R5C_ADDR    0xFE902298
+#define VP4_R6Y_ADDR    0xFE90229C
+#define VP4_R6C_ADDR    0xFE9022A0
+#define VP4_R7Y_ADDR    0xFE9022A4
+#define VP4_R7C_ADDR    0xFE9022A8
+#define VP4_R8Y_ADDR    0xFE9022AC
+#define VP4_R8C_ADDR    0xFE9022B0
+#define VP4_R9Y_ADDR    0xFE9022B4
+#define VP4_R9C_ADDR    0xFE9022B8
+#define VP4_RAY_ADDR    0xFE9022BC
+#define VP4_RAC_ADDR    0xFE9022C0
+#define VP4_RBY_ADDR    0xFE9022C4
+#define VP4_RBC_ADDR    0xFE9022C8
+#define VP4_RCY_ADDR    0xFE9022CC
+#define VP4_RCC_ADDR    0xFE9022D0
+#define VP4_RDY_ADDR    0xFE9022D4
+#define VP4_RDC_ADDR    0xFE9022D8
+#define VP4_REY_ADDR    0xFE9022DC
+#define VP4_REC_ADDR    0xFE9022E0
+#define VP4_RFY_ADDR    0xFE9022E4
+#define VP4_RFC_ADDR    0xFE9022E8
+
+/*	VIO(CEU)	*/
+#define CAPSR       0xFE910000
+#define CAPCR       0xFE910004
+#define CAMCR       0xFE910008
+#define CMCYR       0xFE91000C
+#define CAMOR       0xFE910010
+#define CAPWR       0xFE910014
+#define CAIFR       0xFE910018
+#define CSTCR       0xFE910020
+#define CSECR       0xFE910024
+#define CRCNTR      0xFE910028
+#define CRCMPR      0xFE91002C
+#define CFLCR       0xFE910030
+#define CFSZR       0xFE910034
+#define CDWDR       0xFE910038
+#define CDAYR       0xFE91003C
+#define CDACR       0xFE910040
+#define CDBYR       0xFE910044
+#define CDBCR       0xFE910048
+#define CBDSR       0xFE91004C
+#define CLFCR       0xFE910060
+#define CDOCR       0xFE910064
+#define CDDCR       0xFE910068
+#define CDDAR       0xFE91006C
+#define CEIER       0xFE910070
+#define CETCR       0xFE910074
+#define CSTSR       0xFE91007C
+#define CSRTR       0xFE910080
+#define CDAYR2      0xFE910090
+#define CDACR2      0xFE910094
+#define CDBYR2      0xFE910098
+#define CDBCR2      0xFE91009C
+
+/*	VIO(VEU)	*/
+#define VESTR       0xFE920000
+#define VESWR       0xFE920010
+#define VESSR       0xFE920014
+#define VSAYR       0xFE920018
+#define VSACR       0xFE92001C
+#define VBSSR       0xFE920020
+#define VEDWR       0xFE920030
+#define VDAYR       0xFE920034
+#define VDACR       0xFE920038
+#define VTRCR       0xFE920050
+#define VRFCR       0xFE920054
+#define VRFSR       0xFE920058
+#define VENHR       0xFE92005C
+#define VFMCR       0xFE920070
+#define VVTCR       0xFE920074
+#define VHTCR       0xFE920078
+#define VAPCR       0xFE920080
+#define VECCR       0xFE920084
+#define VAFXR       0xFE920090
+#define VSWPR       0xFE920094
+#define VEIER       0xFE9200A0
+#define VEVTR       0xFE9200A4
+#define VSTAR       0xFE9200B0
+#define VBSRR       0xFE9200B4
+
+/*	VIO(BEU)	*/
+#define BESTR       0xFE930000
+#define BSMWR1      0xFE930010
+#define BSSZR1      0xFE930014
+#define BSAYR1      0xFE930018
+#define BSACR1      0xFE93001C
+#define BSAAR1      0xFE930020
+#define BSIFR1      0xFE930024
+#define BSMWR2      0xFE930028
+#define BSSZR2      0xFE93002C
+#define BSAYR2      0xFE930030
+#define BSACR2      0xFE930034
+#define BSAAR2      0xFE930038
+#define BSIFR2      0xFE93003C
+#define BSMWR3      0xFE930040
+#define BSSZR3      0xFE930044
+#define BSAYR3      0xFE930048
+#define BSACR3      0xFE93004C
+#define BSAAR3      0xFE930050
+#define BSIFR3      0xFE930054
+#define BTPSR       0xFE930058
+#define BMSMWR1     0xFE930070
+#define BMSSZR1     0xFE930074
+#define BMSAYR1     0xFE930078
+#define BMSACR1     0xFE93007C
+#define BMSMWR2     0xFE930080
+#define BMSSZR2     0xFE930084
+#define BMSAYR2     0xFE930088
+#define BMSACR2     0xFE93008C
+#define BMSMWR3     0xFE930090
+#define BMSSZR3     0xFE930094
+#define BMSAYR3     0xFE930098
+#define BMSACR3     0xFE93009C
+#define BMSMWR4     0xFE9300A0
+#define BMSSZR4     0xFE9300A4
+#define BMSAYR4     0xFE9300A8
+#define BMSACR4     0xFE9300AC
+#define BMSIFR      0xFE9300F0
+#define BBLCR0      0xFE930100
+#define BBLCR1      0xFE930104
+#define BPROCR      0xFE930108
+#define BMWCR0      0xFE93010C
+#define BLOCR1      0xFE930114
+#define BLOCR2      0xFE930118
+#define BLOCR3      0xFE93011C
+#define BMLOCR1     0xFE930120
+#define BMLOCR2     0xFE930124
+#define BMLOCR3     0xFE930128
+#define BMLOCR4     0xFE93012C
+#define BMPCCR1     0xFE930130
+#define BMPCCR2     0xFE930134
+#define BPKFR       0xFE930140
+#define BPCCR0      0xFE930144
+#define BPCCR11     0xFE930148
+#define BPCCR12     0xFE93014C
+#define BPCCR21     0xFE930150
+#define BPCCR22     0xFE930154
+#define BPCCR31     0xFE930158
+#define BPCCR32     0xFE93015C
+#define BDMWR       0xFE930160
+#define BDAYR       0xFE930164
+#define BDACR       0xFE930168
+#define BAFXR       0xFE930180
+#define BSWPR       0xFE930184
+#define BEIER       0xFE930188
+#define BEVTR       0xFE93018C
+#define BRCNTR      0xFE930194
+#define BSTAR       0xFE930198
+#define BBRSTR      0xFE93019C
+#define BRCHR       0xFE9301A0
+#define CLUT        0xFE933000
+
+/*	JPU	*/
+#define JCMOD       0xFEA00000
+#define JCCMD       0xFEA00004
+#define JCSTS       0xFEA00008
+#define JCQTN       0xFEA0000C
+#define JCHTN       0xFEA00010
+#define JCDRIU      0xFEA00014
+#define JCDRID      0xFEA00018
+#define JCVSZU      0xFEA0001C
+#define JCVSZD      0xFEA00020
+#define JCHSZU      0xFEA00024
+#define JCHSZD      0xFEA00028
+#define JCDTCU      0xFEA0002C
+#define JCDTCM      0xFEA00030
+#define JCDTCD      0xFEA00034
+#define JINTE       0xFEA00038
+#define JINTS       0xFEA0003C
+#define JCDERR      0xFEA00040
+#define JCRST       0xFEA00044
+#define JIFCNT      0xFEA00060
+#define JIFECNT     0xFEA00070
+#define JIFESYA1    0xFEA00074
+#define JIFESCA1    0xFEA00078
+#define JIFESYA2    0xFEA0007C
+#define JIFESCA2    0xFEA00080
+#define JIFESMW     0xFEA00084
+#define JIFESVSZ    0xFEA00088
+#define JIFESHSZ    0xFEA0008C
+#define JIFEDA1     0xFEA00090
+#define JIFEDA2     0xFEA00094
+#define JIFEDRSZ    0xFEA00098
+#define JIFDCNT     0xFEA000A0
+#define JIFDSA1     0xFEA000A4
+#define JIFDSA2     0xFEA000A8
+#define JIFDDRSZ    0xFEA000AC
+#define JIFDDMW     0xFEA000B0
+#define JIFDDVSZ    0xFEA000B4
+#define JIFDDHSZ    0xFEA000B8
+#define JIFDDYA1    0xFEA000BC
+#define JIFDDCA1    0xFEA000C0
+#define JIFDDYA2    0xFEA000C4
+#define JIFDDCA2    0xFEA000C8
+#define JCQTBL0     0xFEA10000
+#define JCQTBL1     0xFEA10040
+#define JCQTBL2     0xFEA10080
+#define JCQTBL3     0xFEA100C0
+#define JCHTBD0     0xFEA10100
+#define JCHTBA0     0xFEA10120
+#define JCHTBD1     0xFEA10200
+#define JCHTBA1     0xFEA10220
+
+/*	LCDC	*/
+#define MLDDCKPAT1R 0xFE940400
+#define MLDDCKPAT2R 0xFE940404
+#define SLDDCKPAT1R 0xFE940408
+#define SLDDCKPAT2R 0xFE94040C
+#define LDDCKR      0xFE940410
+#define LDDCKSTPR   0xFE940414
+#define MLDMT1R     0xFE940418
+#define MLDMT2R     0xFE94041C
+#define MLDMT3R     0xFE940420
+#define MLDDFR      0xFE940424
+#define MLDSM1R     0xFE940428
+#define MLDSM2R     0xFE94042C
+#define MLDSA1R     0xFE940430
+#define MLDSA2R     0xFE940434
+#define MLDMLSR     0xFE940438
+#define MLDWBFR     0xFE94043C
+#define MLDWBCNTR   0xFE940440
+#define MLDWBAR     0xFE940444
+#define MLDHCNR     0xFE940448
+#define MLDHSYNR    0xFE94044C
+#define MLDVLNR     0xFE940450
+#define MLDVSYNR    0xFE940454
+#define MLDHPDR     0xFE940458
+#define MLDVPDR     0xFE94045C
+#define MLDPMR      0xFE940460
+#define LDPALCR     0xFE940464
+#define LDINTR      0xFE940468
+#define LDSR        0xFE94046C
+#define LDCNT1R     0xFE940470
+#define LDCNT2R     0xFE940474
+#define LDRCNTR     0xFE940478
+#define LDDDSR      0xFE94047C
+#define LDRCR       0xFE940484
+#define LDCMRKRGBR  0xFE9404C4
+#define LDCMRKCMYR  0xFE9404C8
+#define LDCMRK1R    0xFE9404CC
+#define LDCMRK2R    0xFE9404D0
+#define LDCMGKRGBR  0xFE9404D4
+#define LDCMGKCMYR  0xFE9404D8
+#define LDCMGK1R    0xFE9404DC
+#define LDCMGK2R    0xFE9404E0
+#define LDCMBKRGBR  0xFE9404E4
+#define LDCMBKCMYR  0xFE9404E8
+#define LDCMBK1R    0xFE9404EC
+#define LDCMBK2R    0xFE9404F0
+#define LDCMHKPR    0xFE9404F4
+#define LDCMHKQR    0xFE9404F8
+#define LDCMSELR    0xFE9404FC
+#define LDCMTVR     0xFE940500
+#define LDCMTVSELR  0xFE940504
+#define LDCMDTHR    0xFE940508
+#define LDCMCNTR    0xFE94050C
+#define SLDMT1R     0xFE940600
+#define SLDMT2R     0xFE940604
+#define SLDMT3R     0xFE940608
+#define SLDDFR      0xFE94060C
+#define SLDSM1R     0xFE940610
+#define SLDSM2R     0xFE940614
+#define SLDSA1R     0xFE940618
+#define SLDSA2R     0xFE94061C
+#define SLDMLSR     0xFE940620
+#define SLDHCNR     0xFE940624
+#define SLDHSYNR    0xFE940628
+#define SLDVLNR     0xFE94062C
+#define SLDVSYNR    0xFE940630
+#define SLDHPDR     0xFE940634
+#define SLDVPDR     0xFE940638
+#define SLDPMR      0xFE94063C
+#define LDDWD0R     0xFE940800
+#define LDDWD1R     0xFE940804
+#define LDDWD2R     0xFE940808
+#define LDDWD3R     0xFE94080C
+#define LDDWD4R     0xFE940810
+#define LDDWD5R     0xFE940814
+#define LDDWD6R     0xFE940818
+#define LDDWD7R     0xFE94081C
+#define LDDWD8R     0xFE940820
+#define LDDWD9R     0xFE940824
+#define LDDWDAR     0xFE940828
+#define LDDWDBR     0xFE94082C
+#define LDDWDCR     0xFE940830
+#define LDDWDDR     0xFE940834
+#define LDDWDER     0xFE940838
+#define LDDWDFR     0xFE94083C
+#define LDDRDR      0xFE940840
+#define LDDWAR      0xFE940900
+#define LDDRAR      0xFE940904
+#define LDPR00      0xFE940000
+
+/*	VOU	*/
+#define VOUER       0xFE960000
+#define VOUCR       0xFE960004
+#define VOUSTR      0xFE960008
+#define VOUVCR      0xFE96000C
+#define VOUISR      0xFE960010
+#define VOUBCR      0xFE960014
+#define VOUDPR      0xFE960018
+#define VOUDSR      0xFE96001C
+#define VOUVPR      0xFE960020
+#define VOUIR       0xFE960024
+#define VOUSRR      0xFE960028
+#define VOUMSR      0xFE96002C
+#define VOUHIR      0xFE960030
+#define VOUDFR      0xFE960034
+#define VOUAD1R     0xFE960038
+#define VOUAD2R     0xFE96003C
+#define VOUAIR      0xFE960040
+#define VOUSWR      0xFE960044
+#define VOURCR      0xFE960048
+#define VOURPR      0xFE960050
+
+/*	TSIF	*/
+#define TSCTLR      0xA4C80000
+#define TSPIDR      0xA4C80004
+#define TSCMDR      0xA4C80008
+#define TSSTR       0xA4C8000C
+#define TSTSDR      0xA4C80010
+#define TSBUFCLRR   0xA4C80014
+#define TSINTER     0xA4C80018
+#define TSPSCALER   0xA4C80020
+#define TSPSCALERR  0xA4C80024
+#define TSPCRADCMDR 0xA4C80028
+#define TSPCRADCR   0xA4C8002C
+#define TSTRPCRADCR 0xA4C80030
+#define TSDPCRADCR  0xA4C80034
+
+/*	SIU	*/
+#define IFCTL       0xA454C000
+#define SRCTL       0xA454C004
+#define SFORM       0xA454C008
+#define CKCTL       0xA454C00C
+#define TRDAT       0xA454C010
+#define STFIFO      0xA454C014
+#define DPAK        0xA454C01C
+#define CKREV       0xA454C020
+#define EVNTC       0xA454C028
+#define SBCTL       0xA454C040
+#define SBPSET      0xA454C044
+#define SBBUS       0xA454C048
+#define SBWFLG      0xA454C058
+#define SBRFLG      0xA454C05C
+#define SBWDAT      0xA454C060
+#define SBRDAT      0xA454C064
+#define SBFSTS      0xA454C068
+#define SBDVCA      0xA454C06C
+#define SBDVCB      0xA454C070
+#define SBACTIV     0xA454C074
+#define DMAIA       0xA454C090
+#define DMAIB       0xA454C094
+#define DMAOA       0xA454C098
+#define DMAOB       0xA454C09C
+#define SPLRI       0xA454C0B8
+#define SPRRI       0xA454C0BC
+#define SPURI       0xA454C0C4
+#define SPTIS       0xA454C0C8
+#define SPSTS       0xA454C0CC
+#define SPCTL       0xA454C0D0
+#define SPIRI       0xA454C0D4
+#define SPQCF       0xA454C0D8
+#define SPQCS       0xA454C0DC
+#define SPQCT       0xA454C0E0
+#define DPEAK       0xA454C0F0
+#define DSLPD       0xA454C0F4
+#define DSLLV       0xA454C0F8
+#define BRGASEL     0xA454C100
+#define BRRA        0xA454C104
+#define BRGBSEL     0xA454C108
+#define BRRB        0xA454C10C
+
+/*	USB	*/
+#define IFR0        0xA4480000
+#define ISR0        0xA4480010
+#define IER0        0xA4480020
+#define EPDR0I      0xA4480030
+#define EPDR0O      0xA4480034
+#define EPDR0S      0xA4480038
+#define EPDR1       0xA448003C
+#define EPDR2       0xA4480040
+#define EPDR3       0xA4480044
+#define EPDR4       0xA4480048
+#define EPDR5       0xA448004C
+#define EPDR6       0xA4480050
+#define EPDR7       0xA4480054
+#define EPDR8       0xA4480058
+#define EPDR9       0xA448005C
+#define EPSZ0O      0xA4480080
+#define EPSZ3       0xA4480084
+#define EPSZ6       0xA4480088
+#define EPSZ9       0xA448008C
+#define TRG         0xA44800A0
+#define DASTS       0xA44800A4
+#define FCLR        0xA44800AA
+#define DMA         0xA44800AC
+#define EPSTL       0xA44800B2
+#define CVR         0xA44800B4
+#define TSR         0xA44800B8
+#define CTLR        0xA44800BC
+#define EPIR        0xA44800C0
+#define XVERCR      0xA44800D0
+#define STLMR       0xA44800D4
+
+/*	KEYSC	*/
+#define KYCR1       0xA44B0000
+#define KYCR2       0xA44B0004
+#define KYINDR      0xA44B0008
+#define KYOUTDR     0xA44B000C
+
+/*	MMCIF	*/
+#define CMDR0       0xA4448000
+#define CMDR1       0xA4448001
+#define CMDR2       0xA4448002
+#define CMDR3       0xA4448003
+#define CMDR4       0xA4448004
+#define CMDR5       0xA4448005
+#define CMDSTRT     0xA4448006
+#define OPCR        0xA444800A
+#define CSTR        0xA444800B
+#define INTCR0      0xA444800C
+#define INTCR1      0xA444800D
+#define INTSTR0     0xA444800E
+#define INTSTR1     0xA444800F
+#define CLKON       0xA4448010
+#define CTOCR       0xA4448011
+#define VDCNT       0xA4448012
+#define TBCR        0xA4448014
+#define MODER       0xA4448016
+#define CMDTYR      0xA4448018
+#define RSPTYR      0xA4448019
+#define TBNCR       0xA444801A
+#define RSPR0       0xA4448020
+#define RSPR1       0xA4448021
+#define RSPR2       0xA4448022
+#define RSPR3       0xA4448023
+#define RSPR4       0xA4448024
+#define RSPR5       0xA4448025
+#define RSPR6       0xA4448026
+#define RSPR7       0xA4448027
+#define RSPR8       0xA4448028
+#define RSPR9       0xA4448029
+#define RSPR10      0xA444802A
+#define RSPR11      0xA444802B
+#define RSPR12      0xA444802C
+#define RSPR13      0xA444802D
+#define RSPR14      0xA444802E
+#define RSPR15      0xA444802F
+#define RSPR16      0xA4448030
+#define RSPRD       0xA4448031
+#define DTOUTR      0xA4448032
+#define DR          0xA4448040
+#define FIFOCLR     0xA4448042
+#define DMACR       0xA4448044
+#define INTCR2      0xA4448046
+#define INTSTR2     0xA4448048
+
+/*	Z3D3	*/
+#define DLBI        0xFD980000
+#define DLBD0       0xFD980080
+#define DLBD1       0xFD980100
+#define GEWM        0xFD984000
+#define ICD0        0xFD988000
+#define ICD1        0xFD989000
+#define ICT         0xFD98A000
+#define ILM         0xFD98C000
+#define FLM0        0xFD98C800
+#define FLM1        0xFD98D000
+#define FLUT        0xFD98D800
+#define Z3D_PC      0xFD98E400
+#define Z3D_PCSP    0xFD98E404
+#define Z3D_PAR     0xFD98E408
+#define Z3D_IMADR   0xFD98E40C
+#define Z3D_BTR0    0xFD98E410
+#define Z3D_BTR1    0xFD98E414
+#define Z3D_BTR2    0xFD98E418
+#define Z3D_BTR3    0xFD98E41C
+#define Z3D_LC0     0xFD98E420
+#define Z3D_LC1     0xFD98E424
+#define Z3D_LC2     0xFD98E428
+#define Z3D_LC3     0xFD98E42C
+#define Z3D_FR0     0xFD98E430
+#define Z3D_FR1     0xFD98E434
+#define Z3D_FR2     0xFD98E438
+#define Z3D_SR      0xFD98E440
+#define Z3D_SMDR    0xFD98E444
+#define Z3D_PBIR    0xFD98E448
+#define Z3D_DMDR    0xFD98E44C
+#define Z3D_IREG    0xFD98E460
+#define Z3D_AR00    0xFD98E480
+#define Z3D_AR01    0xFD98E484
+#define Z3D_AR02    0xFD98E488
+#define Z3D_AR03    0xFD98E48C
+#define Z3D_BR00    0xFD98E490
+#define Z3D_BR01    0xFD98E494
+#define Z3D_IXR00   0xFD98E4A0
+#define Z3D_IXR01   0xFD98E4A4
+#define Z3D_IXR02   0xFD98E4A8
+#define Z3D_IXR03   0xFD98E4AC
+#define Z3D_AR10    0xFD98E4C0
+#define Z3D_AR11    0xFD98E4C4
+#define Z3D_AR12    0xFD98E4C8
+#define Z3D_AR13    0xFD98E4CC
+#define Z3D_BR10    0xFD98E4D0
+#define Z3D_BR11    0xFD98E4D4
+#define Z3D_IXR10   0xFD98E4E0
+#define Z3D_IXR11   0xFD98E4E4
+#define Z3D_IXR12   0xFD98E4E8
+#define Z3D_IXR13   0xFD98E4EC
+#define Z3D_AR20    0xFD98E500
+#define Z3D_AR21    0xFD98E504
+#define Z3D_AR22    0xFD98E508
+#define Z3D_AR23    0xFD98E50C
+#define Z3D_BR20    0xFD98E510
+#define Z3D_BR21    0xFD98E514
+#define Z3D_IXR20   0xFD98E520
+#define Z3D_IXR21   0xFD98E524
+#define Z3D_IXR22   0xFD98E528
+#define Z3D_IXR23   0xFD98E52C
+#define Z3D_MR0     0xFD98E540
+#define Z3D_MR1     0xFD98E544
+#define Z3D_MR2     0xFD98E548
+#define Z3D_MR3     0xFD98E54C
+#define Z3D_WORKRST 0xFD98E558
+#define Z3D_WORKWST 0xFD98E55C
+#define Z3D_DBADR   0xFD98E560
+#define Z3D_DLBPRST 0xFD98E564
+#define Z3D_DLBRST  0xFD98E568
+#define Z3D_DLBWST  0xFD98E56C
+#define Z3D_UDR0    0xFD98E570
+#define Z3D_UDR1    0xFD98E574
+#define Z3D_UDR2    0xFD98E578
+#define Z3D_UDR3    0xFD98E57C
+#define Z3D_CCR0    0xFD98E580
+#define Z3D_CCR1    0xFD98E584
+#define Z3D_EXPR    0xFD98E588
+#define Z3D_V0_X    0xFD9A0000
+#define Z3D_V0_Y    0xFD9A0004
+#define Z3D_V0_Z    0xFD9A0008
+#define Z3D_V0_W    0xFD9A000C
+#define Z3D_V0_A    0xFD9A0010
+#define Z3D_V0_R    0xFD9A0014
+#define Z3D_V0_G    0xFD9A0018
+#define Z3D_V0_B    0xFD9A001C
+#define Z3D_V0_F    0xFD9A0020
+#define Z3D_V0_SR   0xFD9A0024
+#define Z3D_V0_SG   0xFD9A0028
+#define Z3D_V0_SB   0xFD9A002C
+#define Z3D_V0_U0   0xFD9A0030
+#define Z3D_V0_V0   0xFD9A0034
+#define Z3D_V0_U1   0xFD9A0038
+#define Z3D_V0_V1   0xFD9A003C
+#define Z3D_V1_X    0xFD9A0080
+#define Z3D_V1_Y    0xFD9A0084
+#define Z3D_V1_Z    0xFD9A0088
+#define Z3D_V1_W    0xFD9A008C
+#define Z3D_V1_A    0xFD9A0090
+#define Z3D_V1_R    0xFD9A0094
+#define Z3D_V1_G    0xFD9A0098
+#define Z3D_V1_B    0xFD9A009C
+#define Z3D_V1_F    0xFD9A00A0
+#define Z3D_V1_SR   0xFD9A00A4
+#define Z3D_V1_SG   0xFD9A00A8
+#define Z3D_V1_SB   0xFD9A00AC
+#define Z3D_V1_U0   0xFD9A00B0
+#define Z3D_V1_V0   0xFD9A00B4
+#define Z3D_V1_U1   0xFD9A00B8
+#define Z3D_V1_V1   0xFD9A00BC
+#define Z3D_V2_X    0xFD9A0100
+#define Z3D_V2_Y    0xFD9A0104
+#define Z3D_V2_Z    0xFD9A0108
+#define Z3D_V2_W    0xFD9A010C
+#define Z3D_V2_A    0xFD9A0110
+#define Z3D_V2_R    0xFD9A0114
+#define Z3D_V2_G    0xFD9A0118
+#define Z3D_V2_B    0xFD9A011C
+#define Z3D_V2_F    0xFD9A0120
+#define Z3D_V2_SR   0xFD9A0124
+#define Z3D_V2_SG   0xFD9A0128
+#define Z3D_V2_SB   0xFD9A012C
+#define Z3D_V2_U0   0xFD9A0130
+#define Z3D_V2_V0   0xFD9A0134
+#define Z3D_V2_U1   0xFD9A0138
+#define Z3D_V2_V1   0xFD9A013C
+#define Z3D_RENDER              0xFD9A0180
+#define Z3D_POLYGON_OFFSET      0xFD9A0184
+#define Z3D_VERTEX_CONTROL      0xFD9A0200
+#define Z3D_STATE_MODE          0xFD9A0204
+#define Z3D_FPU_MODE            0xFD9A0318
+#define Z3D_SCISSOR_MIN         0xFD9A0400
+#define Z3D_SCISSOR_MAX         0xFD9A0404
+#define Z3D_TEXTURE_MODE_A      0xFD9A0408
+#define Z3D_TEXTURE_MODE_B      0xFD9A040C
+#define Z3D_TEXTURE_BASE_HI_A   0xFD9A0418
+#define Z3D_TEXTURE_BASE_LO_A   0xFD9A041C
+#define Z3D_TEXTURE_BASE_HI_B   0xFD9A0420
+#define Z3D_TEXTURE_BASE_LO_B   0xFD9A0424
+#define Z3D_TEXTURE_ALPHA_A0    0xFD9A0438
+#define Z3D_TEXTURE_ALPHA_A1    0xFD9A043C
+#define Z3D_TEXTURE_ALPHA_A2    0xFD9A0440
+#define Z3D_TEXTURE_ALPHA_A3    0xFD9A0444
+#define Z3D_TEXTURE_ALPHA_A4    0xFD9A0448
+#define Z3D_TEXTURE_ALPHA_A5    0xFD9A044C
+#define Z3D_TEXTURE_ALPHA_B0    0xFD9A0450
+#define Z3D_TEXTURE_ALPHA_B1    0xFD9A0454
+#define Z3D_TEXTURE_ALPHA_B2    0xFD9A0458
+#define Z3D_TEXTURE_ALPHA_B3    0xFD9A045C
+#define Z3D_TEXTURE_ALPHA_B4    0xFD9A0460
+#define Z3D_TEXTURE_ALPHA_B5    0xFD9A0464
+#define Z3D_TEXTURE_FLUSH       0xFD9A0498
+#define Z3D_GAMMA_TABLE0        0xFD9A049C
+#define Z3D_GAMMA_TABLE1        0xFD9A04A0
+#define Z3D_GAMMA_TABLE2        0xFD9A04A4
+#define Z3D_ALPHA_TEST              0xFD9A0800
+#define Z3D_STENCIL_TEST            0xFD9A0804
+#define Z3D_DEPTH_ROP_BLEND_DITHER  0xFD9A0808
+#define Z3D_MASK                    0xFD9A080C
+#define Z3D_FBUS_MODE               0xFD9A0810
+#define Z3D_GNT_SET                 0xFD9A0814
+#define Z3D_BETWEEN_TEST            0xFD9A0818
+#define Z3D_FB_BASE                 0xFD9A081C
+#define Z3D_LCD_SIZE                0xFD9A0820
+#define Z3D_FB_FLUSH                0xFD9A0824
+#define Z3D_CACHE_INVALID           0xFD9A0828
+#define Z3D_SC_MODE         0xFD9A0830
+#define Z3D_SC0_MIN         0xFD9A0834
+#define Z3D_SC0_MAX         0xFD9A0838
+#define Z3D_SC1_MIN         0xFD9A083C
+#define Z3D_SC1_MAX         0xFD9A0840
+#define Z3D_SC2_MIN         0xFD9A0844
+#define Z3D_SC2_MAX         0xFD9A0848
+#define Z3D_SC3_MIN         0xFD9A084C
+#define Z3D_SC3_MAX         0xFD9A0850
+#define Z3D_READRESET       0xFD9A0854
+#define Z3D_DET_MIN         0xFD9A0858
+#define Z3D_DET_MAX         0xFD9A085C
+#define Z3D_FB_BASE_SR      0xFD9A0860
+#define Z3D_LCD_SIZE_SR     0xFD9A0864
+#define Z3D_2D_CTRL_STATUS          0xFD9A0C00
+#define Z3D_2D_SIZE                 0xFD9A0C04
+#define Z3D_2D_SRCLOC               0xFD9A0C08
+#define Z3D_2D_DSTLOC               0xFD9A0C0C
+#define Z3D_2D_DMAPORT              0xFD9A0C10
+#define Z3D_2D_CONSTANT_SOURCE0     0xFD9A0C14
+#define Z3D_2D_CONSTANT_SOURCE1     0xFD9A0C18
+#define Z3D_2D_STPCOLOR0            0xFD9A0C1C
+#define Z3D_2D_STPCOLOR1            0xFD9A0C20
+#define Z3D_2D_STPPARAMETER_SET0    0xFD9A0C24
+#define Z3D_2D_STPPARAMETER_SET1    0xFD9A0C28
+#define Z3D_2D_STPPAT_0     0xFD9A0C40
+#define Z3D_2D_STPPAT_1     0xFD9A0C44
+#define Z3D_2D_STPPAT_2     0xFD9A0C48
+#define Z3D_2D_STPPAT_3     0xFD9A0C4C
+#define Z3D_2D_STPPAT_4     0xFD9A0C50
+#define Z3D_2D_STPPAT_5     0xFD9A0C54
+#define Z3D_2D_STPPAT_6     0xFD9A0C58
+#define Z3D_2D_STPPAT_7     0xFD9A0C5C
+#define Z3D_2D_STPPAT_8     0xFD9A0C60
+#define Z3D_2D_STPPAT_9     0xFD9A0C64
+#define Z3D_2D_STPPAT_10    0xFD9A0C68
+#define Z3D_2D_STPPAT_11    0xFD9A0C6C
+#define Z3D_2D_STPPAT_12    0xFD9A0C70
+#define Z3D_2D_STPPAT_13    0xFD9A0C74
+#define Z3D_2D_STPPAT_14    0xFD9A0C78
+#define Z3D_2D_STPPAT_15    0xFD9A0C7C
+#define Z3D_2D_STPPAT_16    0xFD9A0C80
+#define Z3D_2D_STPPAT_17    0xFD9A0C84
+#define Z3D_2D_STPPAT_18    0xFD9A0C88
+#define Z3D_2D_STPPAT_19    0xFD9A0C8C
+#define Z3D_2D_STPPAT_20    0xFD9A0C90
+#define Z3D_2D_STPPAT_21    0xFD9A0C94
+#define Z3D_2D_STPPAT_22    0xFD9A0C98
+#define Z3D_2D_STPPAT_23    0xFD9A0C9C
+#define Z3D_2D_STPPAT_24    0xFD9A0CA0
+#define Z3D_2D_STPPAT_25    0xFD9A0CA4
+#define Z3D_2D_STPPAT_26    0xFD9A0CA8
+#define Z3D_2D_STPPAT_27    0xFD9A0CAC
+#define Z3D_2D_STPPAT_28    0xFD9A0CB0
+#define Z3D_2D_STPPAT_29    0xFD9A0CB4
+#define Z3D_2D_STPPAT_30    0xFD9A0CB8
+#define Z3D_2D_STPPAT_31    0xFD9A0CBC
+#define Z3D_WR_CTRL         0xFD9A1000
+#define Z3D_WR_P0           0xFD9A1004
+#define Z3D_WR_P1           0xFD9A1008
+#define Z3D_WR_P2           0xFD9A100C
+#define Z3D_WR_FGC          0xFD9A1010
+#define Z3D_WR_BGC          0xFD9A1014
+#define Z3D_WR_SZ           0xFD9A1018
+#define Z3D_WR_PATPARAM     0xFD9A101C
+#define Z3D_WR_PAT          0xFD9A1020
+#define Z3D_SYS_STATUS      0xFD9A1400
+#define Z3D_SYS_RESET       0xFD9A1404
+#define Z3D_SYS_CLK         0xFD9A1408
+#define Z3D_SYS_CONF        0xFD9A140C
+#define Z3D_SYS_VERSION     0xFD9A1410
+#define Z3D_SYS_DBINV       0xFD9A1418
+#define Z3D_SYS_I2F_FMT     0xFD9A1420
+#define Z3D_SYS_I2F_SRC     0xFD9A1424
+#define Z3D_SYS_I2F_DST     0xFD9A1428
+#define Z3D_SYS_GBCNT       0xFD9A1430
+#define Z3D_SYS_BSYCNT      0xFD9A1434
+#define Z3D_SYS_INT_STATUS  0xFD9A1450
+#define Z3D_SYS_INT_MASK    0xFD9A1454
+#define Z3D_SYS_INT_CLEAR   0xFD9A1458
+#define TCD0        0xFD9C0000
+#define TCD1        0xFD9C0400
+#define TCD2        0xFD9C0800
+#define TCD3        0xFD9C0C00
+#define TCT0        0xFD9C1000
+#define TCT1        0xFD9C1400
+#define TCT2        0xFD9C1800
+#define TCT3        0xFD9C1C00
+
+/*	PFC	*/
+#define PACR        0xA4050100
+#define PBCR        0xA4050102
+#define PCCR        0xA4050104
+#define PDCR        0xA4050106
+#define PECR        0xA4050108
+#define PFCR        0xA405010A
+#define PGCR        0xA405010C
+#define PHCR        0xA405010E
+#define PJCR        0xA4050110
+#define PKCR        0xA4050112
+#define PLCR        0xA4050114
+#define PMCR        0xA4050116
+#define PNCR        0xA4050118
+#define PQCR        0xA405011A
+#define PRCR        0xA405011C
+#define PSCR        0xA405011E
+#define PTCR        0xA4050140
+#define PUCR        0xA4050142
+#define PVCR        0xA4050144
+#define PWCR        0xA4050146
+#define PXCR        0xA4050148
+#define PYCR        0xA405014A
+#define PZCR        0xA405014C
+#define PSELA       0xA405014E
+#define PSELB       0xA4050150
+#define PSELC       0xA4050152
+#define PSELD       0xA4050154
+#define PSELE       0xA4050156
+#define HIZCRA      0xA4050158
+#define HIZCRB      0xA405015A
+#define HIZCRC      0xA405015C
+#define MSELCR      0xA405015C
+#define PULCR       0xA405015E
+#define DRVCR       0xA4050180
+#define SBSCR       0xA4050182
+#define AUDTHCR     0xA4050184
+#define PSELF       0xA4050186
+
+/*	I/O Port	*/
+#define PADR        0xA4050120
+#define PBDR        0xA4050122
+#define PCDR        0xA4050124
+#define PDDR        0xA4050126
+#define PEDR        0xA4050128
+#define PFDR        0xA405012A
+#define PGDR        0xA405012C
+#define PHDR        0xA405012E
+#define PJDR        0xA4050130
+#define PKDR        0xA4050132
+#define PLDR        0xA4050134
+#define PMDR        0xA4050136
+#define PNDR        0xA4050138
+#define PQDR        0xA405013A
+#define PRDR        0xA405013C
+#define PSDR        0xA405013E
+#define PTDR        0xA4050160
+#define PUDR        0xA4050162
+#define PVDR        0xA4050164
+#define PWDR        0xA4050166
+#define PYDR        0xA4050168
+#define PZDR        0xA405016A
+
+/*	UBC	*/
+#define CBR0        0xFF200000
+#define CRR0        0xFF200004
+#define CAR0        0xFF200008
+#define CAMR0       0xFF20000C
+#define CBR1        0xFF200020
+#define CRR1        0xFF200024
+#define CAR1        0xFF200028
+#define CAMR1       0xFF20002C
+#define CDR1        0xFF200030
+#define CDMR1       0xFF200034
+#define CETR1       0xFF200038
+#define CCMFR       0xFF200600
+#define CBCR        0xFF200620
+
+/*	H-UDI	*/
+#define SDIR        0xFC110000
+#define SDDRH       0xFC110008
+#define SDDRL       0xFC11000A
+#define SDINT       0xFC110018
+
+#endif /* _ASM_CPU_SH7722_H_ */
diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h
new file mode 100644
index 000000000..bb6461a6b
--- /dev/null
+++ b/include/asm-sh/cpu_sh7750.h
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * SH7750/SH7750S/SH7750R/SH7751/SH7751R
+ *  Internal I/O register
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH7750_H_
+#define _ASM_CPU_SH7750_H_
+
+#ifdef CONFIG_CPU_TYPE_R
+#define CACHE_OC_NUM_WAYS     2
+#define CCR_CACHE_INIT   0x8000090d     /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */
+#else
+#define CACHE_OC_NUM_WAYS     1
+#define CCR_CACHE_INIT   0x0000090b
+#endif
+
+/*      OCN     */
+#define PTEH 	0xFF000000
+#define PTEL 	0xFF000004
+#define TTB 	0xFF000008
+#define TEA 	0xFF00000C
+#define MMUCR 	0xFF000010
+#define BASRA 	0xFF000014
+#define BASRB	0xFF000018
+#define CCR	0xFF00001C
+#define TRA 	0xFF000020
+#define EXPEVT 	0xFF000024
+#define INTEVT 	0xFF000028
+#define PTEA 	0xFF000034
+#define QACR0 	0xFF000038
+#define QACR1 	0xFF00003C
+
+/*      UBC     */
+#define BARA 	0xFF200000
+#define BAMRA 	0xFF200004
+#define BBRA 	0xFF200008
+#define BARB 	0xFF20000C
+#define BAMRB 	0xFF200010
+#define BBRB 	0xFF200014
+#define BDRB 	0xFF200018
+#define BDMRB 	0xFF20001C
+#define BRCR 	0xFF200020
+
+/*      BSC     */
+#define BCR1	0xFF800000
+#define BCR2	0xFF800004
+#define BCR3 	0xFF800050
+#define BCR4	0xFE0A00F0
+#define WCR1 	0xFF800008
+#define WCR2 	0xFF80000C
+#define WCR3 	0xFF800010
+#define MCR 	0xFF800014
+#define PCR 	0xFF800018
+#define RTCSR 	0xFF80001C
+#define RTCNT 	0xFF800020
+#define RTCOR 	0xFF800024
+#define RFCR 	0xFF800028
+#define PCTRA 	0xFF80002C
+#define PDTRA 	0xFF800030
+#define PCTRB 	0xFF800040
+#define PDTRB 	0xFF800044
+#define GPIOIC 	0xFF800048
+
+/*      DMAC    */
+#define SAR0 	0xFFA00000
+#define DAR0 	0xFFA00004
+#define DMATCR0 0xFFA00008
+#define CHCR0	0xFFA0000C
+#define SAR1 	0xFFA00010
+#define DAR1 	0xFFA00014
+#define DMATCR1 0xFFA00018
+#define CHCR1 	0xFFA0001C
+#define SAR2 	0xFFA00020
+#define DAR2 	0xFFA00024
+#define DMATCR2 0xFFA00028
+#define CHCR2 	0xFFA0002C
+#define SAR3 	0xFFA00030
+#define DAR3 	0xFFA00034
+#define DMATCR3 0xFFA00038
+#define CHCR3 	0xFFA0003C
+#define DMAOR 	0xFFA00040
+#define SAR4	0xFFA00050
+#define DAR4 	0xFFA00054
+#define DMATCR4 0xFFA00058
+
+/*      CPG     */
+#define FRQCR 	0xFFC00000
+#define STBCR 	0xFFC00004
+#define WTCNT 	0xFFC00008
+#define WTCSR 	0xFFC0000C
+#define STBCR2 	0xFFC00010
+
+/*      RTC     */
+#define R64CNT	0xFFC80000
+#define RSECCNT 0xFFC80004
+#define RMINCNT 0xFFC80008
+#define RHRCNT 	0xFFC8000C
+#define RWKCNT 	0xFFC80010
+#define RDAYCNT 0xFFC80014
+#define RMONCNT 0xFFC80018
+#define RYRCNT 	0xFFC8001C
+#define RSECAR 	0xFFC80020
+#define RMINAR 	0xFFC80024
+#define RHRAR 	0xFFC80028
+#define RWKAR 	0xFFC8002C
+#define RDAYAR 	0xFFC80030
+#define RMONAR 	0xFFC80034
+#define RCR1 	0xFFC80038
+#define RCR2 	0xFFC8003C
+#define RCR3 	0xFFC80050
+#define RYRAR 	0xFFC80054
+
+/*      ICR     */
+#define ICR 	0xFFD00000
+#define IPRA 	0xFFD00004
+#define IPRB 	0xFFD00008
+#define IPRC	0xFFD0000C
+#define IPRD 	0xFFD00010
+#define INTPRI 	0xFE080000
+#define INTREQ	0xFE080020
+#define INTMSK	0xFE080040
+#define INTMSKCL	0xFE080060
+
+/*      CPG     */
+#define CLKSTP		0xFE0A0000
+#define CLKSTPCLR	0xFE0A0008
+
+/*      TMU     */
+#define TSTR2 	0xFE100004
+#define TCOR3 	0xFE100008
+#define TCNT3 	0xFE10000C
+#define TCR3 	0xFE100010
+#define TCOR4 	0xFE100014
+#define TCNT4 	0xFE100018
+#define TCR4 	0xFE10001C
+#define TOCR 	0xFFD80000
+#define TSTR0 	0xFFD80004
+#define TCOR0	0xFFD80008
+#define TCNT0 	0xFFD8000C
+#define TCR0 	0xFFD80010
+#define TCOR1 	0xFFD80014
+#define TCNT1 	0xFFD80018
+#define TCR1 	0xFFD8001C
+#define TCOR2 	0xFFD80020
+#define TCNT2 	0xFFD80024
+#define TCR2 	0xFFD80028
+#define TCPR2 	0xFFD8002C
+#define TSTR	TSTR0
+
+/*      SCI     */
+#define SCSMR1 	0xFFE00000
+#define SCBRR1 	0xFFE00004
+#define SCSCR1 	0xFFE00008
+#define SCTDR1 	0xFFE0000C
+#define SCSSR1 	0xFFE00010
+#define SCRDR1 	0xFFE00014
+#define SCSCMR1 0xFFE00018
+#define SCSPTR1 0xFFE0001C
+#define SCF0_BASE	SCSMR1
+
+/*      SCIF    */
+#define SCSMR2 	0xFFE80000
+#define SCBRR2 	0xFFE80004
+#define SCSCR2 	0xFFE80008
+#define SCFTDR2 0xFFE8000C
+#define SCFSR2 	0xFFE80010
+#define SCFRDR2	0xFFE80014
+#define SCFCR2 	0xFFE80018
+#define SCFDR2 	0xFFE8001C
+#define SCSPTR2	0xFFE80020
+#define SCLSR2 	0xFFE80024
+#define SCIF1_BASE	SCSMR2
+
+/*      H-UDI   */
+#define SDIR 	0xFFF00000
+#define SDDR 	0xFFF00008
+#define SDINT 	0xFFF00014
+
+#endif	/* _ASM_CPU_SH7750_H_ */
diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h
new file mode 100644
index 000000000..0d2c61803
--- /dev/null
+++ b/include/asm-sh/errno.h
@@ -0,0 +1,156 @@
+/*
+ * U-boot - errno.h Error number defines
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _BLACKFIN_ERRNO_H
+#define _BLACKFIN_ERRNO_H
+
+#define	EPERM		1	/* Operation not permitted */
+#define	ENOENT		2	/* No such file or directory */
+#define	ESRCH		3	/* No such process */
+#define	EINTR		4	/* Interrupted system call */
+#define	EIO		5	/* I/O error */
+#define	ENXIO		6	/* No such device or address */
+#define	E2BIG		7	/* Arg list too long */
+#define	ENOEXEC		8	/* Exec format error */
+#define	EBADF		9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+#define	ENOSYS		38	/* Function not implemented */
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale NFS file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+
+#endif
diff --git a/include/asm-sh/global_data.h b/include/asm-sh/global_data.h
new file mode 100644
index 000000000..0a44a34ce
--- /dev/null
+++ b/include/asm-sh/global_data.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef	__ASM_SH_GLOBALDATA_H_
+#define __ASM_SH_GLOBALDATA_H_
+
+typedef	struct global_data
+{
+	bd_t		*bd;
+	unsigned long	flags;
+	unsigned long	baudrate;
+	unsigned long	cpu_clk;	/* CPU clock in Hz! */
+	unsigned long	have_console;	/* serial_init() was called */
+	unsigned long	ram_size;	/* RAM size */
+	unsigned long	reloc_off;	/* Relocation Offset */
+	unsigned long	env_addr;	/* Address  of Environment struct */
+	unsigned long	env_valid;	/* Checksum of Environment valid */
+	void		**jt;		/* Standalone app jump table */
+}gd_t;
+
+#define	GD_FLG_RELOC	0x00001		/* Code was relocated to RAM		*/
+#define	GD_FLG_DEVINIT	0x00002		/* Devices have been initialized	*/
+#define	GD_FLG_SILENT	0x00004		/* Silent mode				*/
+
+#define DECLARE_GLOBAL_DATA_PTR	register gd_t *gd asm ("r13")
+
+#endif /* __ASM_SH_GLOBALDATA_H_ */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
new file mode 100644
index 000000000..03427ad33
--- /dev/null
+++ b/include/asm-sh/io.h
@@ -0,0 +1,231 @@
+/*
+ *  linux/include/asm-sh/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ */
+#ifndef __ASM_SH_IO_H
+#define __ASM_SH_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * Generic virtual read/write.  Note that we don't support half-word
+ * read/writes.  We define __arch_*[bl] here, and leave __arch_*w
+ * to the architecture specific code.
+ */
+#define __arch_getb(a)			(*(volatile unsigned char *)(a))
+#define __arch_getw(a)			(*(volatile unsigned short *)(a))
+#define __arch_getl(a)			(*(volatile unsigned int *)(a))
+
+#define __arch_putb(v,a)		(*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+
+extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
+extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
+extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
+
+extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
+extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
+extern void __raw_readsl(unsigned int addr, void *data, int longlen);
+
+#define __raw_writeb(v,a)		__arch_putb(v,a)
+#define __raw_writew(v,a)		__arch_putw(v,a)
+#define __raw_writel(v,a)		__arch_putl(v,a)
+
+#define __raw_readb(a)			__arch_getb(a)
+#define __raw_readw(a)			__arch_getw(a)
+#define __raw_readl(a)			__arch_getl(a)
+
+/*
+ * The compiler seems to be incapable of optimising constants
+ * properly.  Spell it out to the compiler in some cases.
+ * These are only valid for small values of "off" (< 1<<12)
+ */
+#define __raw_base_writeb(val,base,off)	__arch_base_putb(val,base,off)
+#define __raw_base_writew(val,base,off)	__arch_base_putw(val,base,off)
+#define __raw_base_writel(val,base,off)	__arch_base_putl(val,base,off)
+
+#define __raw_base_readb(base,off)	__arch_base_getb(base,off)
+#define __raw_base_readw(base,off)	__arch_base_getw(base,off)
+#define __raw_base_readl(base,off)	__arch_base_getl(base,off)
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#if 0	/* XXX###XXX */
+#include <asm/arch/io.h>
+#endif	/* XXX###XXX */
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The SH doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#define outb(v,p)               __raw_writeb(v, p)
+#define outw(v,p)               __raw_writew(cpu_to_le16(v),p)
+#define outl(v,p)               __raw_writel(cpu_to_le32(v),p)
+
+#define inb(p)  ({ unsigned int __v = __raw_readb(p); __v; })
+#define inw(p)  ({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; })
+#define inl(p)  ({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; })
+
+#define outsb(p,d,l)			__raw_writesb(p,d,l)
+#define outsw(p,d,l)			__raw_writesw(p,d,l)
+#define outsl(p,d,l)			__raw_writesl(p,d,l)
+
+#define insb(p,d,l)			__raw_readsb(p,d,l)
+#define insw(p,d,l)			__raw_readsw(p,d,l)
+#define insl(p,d,l)			__raw_readsl(p,d,l)
+
+#define outb_p(val,port)		outb((val),(port))
+#define outw_p(val,port)		outw((val),(port))
+#define outl_p(val,port)		outl((val),(port))
+#define inb_p(port)			inb((port))
+#define inw_p(port)			inw((port))
+#define inl_p(port)			inl((port))
+
+#define outsb_p(port,from,len)		outsb(port,from,len)
+#define outsw_p(port,from,len)		outsw(port,from,len)
+#define outsl_p(port,from,len)		outsl(port,from,len)
+#define insb_p(port,to,len)		insb(port,to,len)
+#define insw_p(port,to,len)		insw(port,to,len)
+#define insl_p(port,to,len)		insl(port,to,len)
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * linux/Documentation/IO-mapping.txt.  If you want a
+ * physical address, use __ioremap instead.
+ */
+extern void * __ioremap(unsigned long offset, size_t size, unsigned long flags);
+extern void __iounmap(void *addr);
+
+/*
+ * Generic ioremap support.
+ *
+ * Define:
+ *  iomem_valid_addr(off,size)
+ *  iomem_to_phys(off)
+ */
+#ifdef iomem_valid_addr
+#define __arch_ioremap(off,sz,nocache)				\
+ ({								\
+	unsigned long _off = (off), _size = (sz);		\
+	void *_ret = (void *)0;					\
+	if (iomem_valid_addr(_off, _size))			\
+		_ret = __ioremap(iomem_to_phys(_off),_size,0);	\
+	_ret;							\
+ })
+
+#define __arch_iounmap __iounmap
+#endif
+
+#define ioremap(off,sz)			__arch_ioremap((off),(sz),0)
+#define ioremap_nocache(off,sz)		__arch_ioremap((off),(sz),1)
+#define iounmap(_addr)			__arch_iounmap(_addr)
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ */
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
+extern void consistent_sync(void *vaddr, size_t size, int rw);
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, unsigned long, size_t);
+extern void _memcpy_toio(unsigned long, const void *, size_t);
+extern void _memset_io(unsigned long, int, size_t);
+
+/*
+ * If this architecture has PCI memory IO, then define the read/write
+ * macros.  These should only be used with the cookie passed from
+ * ioremap.
+ */
+#ifdef __mem_pci
+
+#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
+
+#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
+#define writew(v,c)		__raw_writew(cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c)		__raw_writel(cpu_to_le32(v),__mem_pci(c))
+
+#define memset_io(c,v,l)		_memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio(__mem_pci(c),(a),(l))
+
+#define eth_io_copy_and_sum(s,c,l,b) \
+				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+
+static inline int
+check_signature(unsigned long io_addr, const unsigned char *signature,
+		int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+#elif !defined(readb)
+
+#define readb(addr)	__raw_readb(addr)
+#define readw(addr)	__raw_readw(addr)
+#define readl(addr)	__raw_readl(addr)
+#define writeb(v,addr)	__raw_writeb(v, addr)
+#define writew(v,addr)	__raw_writew(v, addr)
+#define writel(v,addr)	__raw_writel(v, addr)
+
+#define check_signature(io,sig,len)	(0)
+
+#endif	/* __mem_pci */
+
+static inline void sync(void)
+{
+}
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_SH_IO_H */
diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h
new file mode 100644
index 000000000..830e5486a
--- /dev/null
+++ b/include/asm-sh/irqflags.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_SH_IRQFLAGS_H
+#define __ASM_SH_IRQFLAGS_H
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+		"stc	r6_bank, %1\n\t"
+		"or	%1, %0\n\t"
+#endif
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x000000f0)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void set_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	%2, %0\n\t"
+		"and	%3, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "r" (0x10000000), "r" (0xffffff0f)
+		: "memory"
+	);
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%2, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x10000000)
+		: "memory"
+	);
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags != 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags, __dummy;
+
+	__asm__ __volatile__ (
+		"stc	sr, %1\n\t"
+		"mov	%1, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		"mov	%1, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags), "=&r" (__dummy)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+#define local_irq_save raw_local_irq_save
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if ((flags & 0xf0) != 0xf0)
+		raw_local_irq_enable();
+}
+#define local_irq_restore raw_local_irq_restore
+
+#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h
new file mode 100644
index 000000000..c9d9fb84f
--- /dev/null
+++ b/include/asm-sh/posix_types.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH_POSIX_TYPES_H
+#define __ASM_SH_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short  __kernel_dev_t;
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
new file mode 100644
index 000000000..bb9a35f64
--- /dev/null
+++ b/include/asm-sh/processor.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SH_PROCESSOR_H_
+#define _ASM_SH_PROCESSOR_H_
+#if defined CONFIG_SH3
+# include <asm/cpu_sh3.h>
+#elif defined (CONFIG_SH4)
+# include <asm/cpu_sh4.h>
+#endif
+#endif
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
new file mode 100644
index 000000000..14cc1aca6
--- /dev/null
+++ b/include/asm-sh/ptrace.h
@@ -0,0 +1,112 @@
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * from linux kernel code.
+ */
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *	 0 - 15 are integer registers
+ *	17 - 22 are control/special registers
+ *	24 - 39 fp registers
+ *	40 - 47 xd registers
+ *	48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *	16 --- program counter (PC)
+ *	22 --- syscall #
+ *	23 --- floating point communication register
+ */
+#define REG_REG0	 0
+#define REG_REG15	15
+
+#define REG_PC		16
+
+#define REG_PR		17
+#define REG_SR		18
+#define REG_GBR      	19
+#define REG_MACH	20
+#define REG_MACL	21
+
+#define REG_SYSCALL	22
+
+#define REG_FPREG0	23
+#define REG_FPREG15	38
+#define REG_XFREG0	39
+#define REG_XFREG15	54
+
+#define REG_FPSCR	55
+#define REG_FPUL	56
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD     0x00000001
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long regs[16];
+	unsigned long pc;
+	unsigned long pr;
+	unsigned long sr;
+	unsigned long gbr;
+	unsigned long mach;
+	unsigned long macl;
+	long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+	unsigned long	a1;
+	unsigned long	a0g;
+	unsigned long	a1g;
+	unsigned long	m0;
+	unsigned long	m1;
+	unsigned long	a0;
+	unsigned long	x0;
+	unsigned long	x1;
+	unsigned long	y0;
+	unsigned long	y1;
+	unsigned long	dsr;
+	unsigned long	rs;
+	unsigned long	re;
+	unsigned long	mod;
+};
+
+#define	PTRACE_GETDSPREGS	55
+#define	PTRACE_SETDSPREGS	56
+
+#ifdef __KERNEL__
+#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+
+#ifdef CONFIG_SH_DSP
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+#else
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(unsigned long)) - 1)
+#endif
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (pc >= 0xa0000000UL && pc < 0xc0000000UL)
+		pc -= 0x20000000;
+	return pc;
+}
+#endif
+
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h
new file mode 100644
index 000000000..27d981b79
--- /dev/null
+++ b/include/asm-sh/string.h
@@ -0,0 +1,162 @@
+#ifndef __ASM_SH_STRING_H
+#define __ASM_SH_STRING_H
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * But consider these trivial functions to be public domain.
+ *
+ * from linux kernel code.
+ */
+
+#ifdef __KERNEL__               /* only set these up for kernel code */
+
+#define __HAVE_ARCH_STRCPY
+static inline char *strcpy(char *__dest, const char *__src)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	__asm__ __volatile__("1:\n\t"
+			     "mov.b	@%1+, %2\n\t"
+			     "mov.b	%2, @%0\n\t"
+			     "cmp/eq	#0, %2\n\t"
+			     "bf/s	1b\n\t"
+			     " add	#1, %0\n\t"
+			     : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+			     : "0" (__dest), "1" (__src)
+			     : "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *__dest, const char *__src, size_t __n)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return __xdest;
+
+	__asm__ __volatile__(
+		"1:\n"
+		"mov.b	@%1+, %2\n\t"
+		"mov.b	%2, @%0\n\t"
+		"cmp/eq	#0, %2\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq	%5,%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0\n"
+		"2:"
+		: "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+		: "0" (__dest), "1" (__src), "r" (__src+__n)
+		: "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *__cs, const char *__ct)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq #0, %3\n\t"
+		"bt	2f\n\t"
+		"cmp/eq %2, %3\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n\t"
+		"sub	%3, %2\n"
+		"2:"
+		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return 0;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq %6, %0\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq #0, %3\n\t"
+		"bt/s	3f\n\t"
+		" cmp/eq %3, %2\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n"
+		"2:\n\t"
+		"sub	%3, %2\n"
+		"3:"
+		:"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct), "r" (__cs+__n)
+		: "t");
+
+	return __res;
+}
+
+#undef __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#undef __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#undef __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#undef __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *__s, int __c, size_t __n);
+
+#undef __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+/* arch/sh/lib/strcasecmp.c */
+extern int strcasecmp(const char *, const char *);
+
+#else                           /* KERNEL */
+
+/*
+ * let user libraries deal with these,
+ * IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY      1
+#define __HAVE_ARCH_STRNCPY     1
+#define __HAVE_ARCH_STRCAT      1
+#define __HAVE_ARCH_STRNCAT     1
+#define __HAVE_ARCH_STRCMP      1
+#define __HAVE_ARCH_STRNCMP     1
+#define __HAVE_ARCH_STRNICMP    1
+#define __HAVE_ARCH_STRCHR      1
+#define __HAVE_ARCH_STRRCHR     1
+#define __HAVE_ARCH_STRSTR      1
+#define __HAVE_ARCH_STRLEN      1
+#define __HAVE_ARCH_STRNLEN     1
+#define __HAVE_ARCH_MEMSET      1
+#define __HAVE_ARCH_MEMCPY      1
+#define __HAVE_ARCH_MEMMOVE     1
+#define __HAVE_ARCH_MEMSCAN     1
+#define __HAVE_ARCH_MEMCMP      1
+#define __HAVE_ARCH_MEMCHR      1
+#define __HAVE_ARCH_STRTOK      1
+
+#endif /* KERNEL */
+#endif /* __ASM_SH_STRING_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
new file mode 100644
index 000000000..b353bc5c3
--- /dev/null
+++ b/include/asm-sh/system.h
@@ -0,0 +1,275 @@
+#ifndef __ASM_SH_SYSTEM_H
+#define __ASM_SH_SYSTEM_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * from linux kernel code.
+ */
+
+#include <linux/irqflags.h>
+#include <asm/types.h>
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+
+#define switch_to(prev, next, last) do {				\
+ struct task_struct *__last;						\
+ register unsigned long *__ts1 __asm__ ("r1") = &prev->thread.sp;	\
+ register unsigned long *__ts2 __asm__ ("r2") = &prev->thread.pc;	\
+ register unsigned long *__ts4 __asm__ ("r4") = (unsigned long *)prev;	\
+ register unsigned long *__ts5 __asm__ ("r5") = (unsigned long *)next;	\
+ register unsigned long *__ts6 __asm__ ("r6") = &next->thread.sp;	\
+ register unsigned long __ts7 __asm__ ("r7") = next->thread.pc;		\
+ __asm__ __volatile__ (".balign 4\n\t" 					\
+		       "stc.l	gbr, @-r15\n\t" 			\
+		       "sts.l	pr, @-r15\n\t" 				\
+		       "mov.l	r8, @-r15\n\t" 				\
+		       "mov.l	r9, @-r15\n\t" 				\
+		       "mov.l	r10, @-r15\n\t" 			\
+		       "mov.l	r11, @-r15\n\t" 			\
+		       "mov.l	r12, @-r15\n\t" 			\
+		       "mov.l	r13, @-r15\n\t" 			\
+		       "mov.l	r14, @-r15\n\t" 			\
+		       "mov.l	r15, @r1	! save SP\n\t"		\
+		       "mov.l	@r6, r15	! change to new stack\n\t" \
+		       "mova	1f, %0\n\t" 				\
+		       "mov.l	%0, @r2		! save PC\n\t" 		\
+		       "mov.l	2f, %0\n\t" 				\
+		       "jmp	@%0		! call __switch_to\n\t" \
+		       " lds	r7, pr		!  with return to new PC\n\t" \
+		       ".balign	4\n"					\
+		       "2:\n\t"						\
+		       ".long	__switch_to\n"				\
+		       "1:\n\t"						\
+		       "mov.l	@r15+, r14\n\t"				\
+		       "mov.l	@r15+, r13\n\t"				\
+		       "mov.l	@r15+, r12\n\t"				\
+		       "mov.l	@r15+, r11\n\t"				\
+		       "mov.l	@r15+, r10\n\t"				\
+		       "mov.l	@r15+, r9\n\t"				\
+		       "mov.l	@r15+, r8\n\t"				\
+		       "lds.l	@r15+, pr\n\t"				\
+		       "ldc.l	@r15+, gbr\n\t"				\
+		       : "=z" (__last)					\
+		       : "r" (__ts1), "r" (__ts2), "r" (__ts4), 	\
+			 "r" (__ts5), "r" (__ts6), "r" (__ts7) 		\
+		       : "r3", "t");					\
+	last = __last;							\
+} while (0)
+
+/*
+ * On SMP systems, when the scheduler does migration-cost autodetection,
+ * it needs a way to flush as much of the CPU's caches as possible.
+ *
+ * TODO: fill this in!
+ */
+static inline void sched_cacheflush(void)
+{
+}
+
+#ifdef CONFIG_CPU_SH4A
+#define __icbi()			\
+{					\
+	unsigned long __addr;		\
+	__addr = 0xa8000000;		\
+	__asm__ __volatile__(		\
+		"icbi   %0\n\t"		\
+		: /* no output */	\
+		: "m" (__m(__addr)));	\
+}
+#endif
+
+static inline unsigned long tas(volatile int *m)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ ("tas.b	@%1\n\t"
+			      "movt	%0"
+			      : "=r" (retval): "r" (m): "t", "memory");
+	return retval;
+}
+
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#ifdef CONFIG_CPU_SH4A
+#define mb()		__asm__ __volatile__ ("synco": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("synco": : :"memory")
+#define ctrl_barrier()	__icbi()
+#define read_barrier_depends()	do { } while(0)
+#else
+#define mb()		__asm__ __volatile__ ("": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("": : :"memory")
+#define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#define read_barrier_depends()	do { } while(0)
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+
+/*
+ * Jump to P2 area.
+ * When handling TLB or caches, we need to do it from P2 area.
+ */
+#define jump_to_P2()			\
+do {					\
+	unsigned long __dummy;		\
+	__asm__ __volatile__(		\
+		"mov.l	1f, %0\n\t"	\
+		"or	%1, %0\n\t"	\
+		"jmp	@%0\n\t"	\
+		" nop\n\t" 		\
+		".balign 4\n"		\
+		"1:	.long 2f\n"	\
+		"2:"			\
+		: "=&r" (__dummy)	\
+		: "r" (0x20000000));	\
+} while (0)
+
+/*
+ * Back to P1 area.
+ */
+#define back_to_P1()					\
+do {							\
+	unsigned long __dummy;				\
+	ctrl_barrier();					\
+	__asm__ __volatile__(				\
+		"mov.l	1f, %0\n\t"			\
+		"jmp	@%0\n\t"			\
+		" nop\n\t"				\
+		".balign 4\n"				\
+		"1:	.long 2f\n"			\
+		"2:"					\
+		: "=&r" (__dummy));			\
+} while (0)
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val & 0xff;
+	local_irq_restore(flags);
+	return retval;
+}
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size)				\
+({							\
+	unsigned long __xchg__res;			\
+	volatile void *__xchg_ptr = (ptr);		\
+	switch (size) {					\
+	case 4:						\
+		__xchg__res = xchg_u32(__xchg_ptr, x);	\
+		break;					\
+	case 1:						\
+		__xchg__res = xchg_u8(__xchg_ptr, x);	\
+		break;					\
+	default:					\
+		__xchg_called_with_bad_pointer();	\
+		__xchg__res = x;			\
+		break;					\
+	}						\
+							\
+	__xchg__res;					\
+})
+
+#define xchg(ptr,x)	\
+	((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
+	unsigned long new)
+{
+	__u32 retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);       /* implies memory barrier  */
+	return retval;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+		unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+extern void *set_exception_table_vec(unsigned int vec, void *handler);
+
+static inline void *set_exception_table_evt(unsigned int evt, void *handler)
+{
+	return set_exception_table_vec(evt >> 5, handler);
+}
+
+/* XXX
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h
new file mode 100644
index 000000000..fd00dbb82
--- /dev/null
+++ b/include/asm-sh/types.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_SH_TYPES_H
+#define __ASM_SH_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_TYPES_H */
diff --git a/include/asm-sh/u-boot.h b/include/asm-sh/u-boot.h
new file mode 100644
index 000000000..b79644cfd
--- /dev/null
+++ b/include/asm-sh/u-boot.h
@@ -0,0 +1,42 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ * NOTE: This header file defines an interface to U-Boot. Including
+ * this (unmodified) header file in another file is considered normal
+ * use of U-Boot, and does *not* fall under the heading of "derived
+ * work".
+ ********************************************************************
+ */
+
+#ifndef __ASM_SH_U_BOOT_H_
+#define __ASM_SH_U_BOOT_H_
+
+typedef struct bd_info {
+	unsigned long   bi_memstart;    /* start of DRAM memory */
+	unsigned long   bi_memsize;     /* size  of DRAM memory in bytes */
+	unsigned long   bi_flashstart;  /* start of FLASH memory */
+	unsigned long   bi_flashsize;   /* size  of FLASH memory */
+	unsigned long   bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long   bi_sramstart;   /* start of SRAM memory */
+	unsigned long   bi_sramsize;    /* size  of SRAM memory */
+	unsigned long   bi_ip_addr;     /* IP Address */
+	unsigned char   bi_enetaddr[6]; /* Ethernet adress */
+	unsigned long   bi_baudrate;    /* Console Baudrate */
+	unsigned long	bi_boot_params; /* where this board expects params */
+} bd_t;
+
+#endif
diff --git a/include/bcd.h b/include/bcd.h
new file mode 100644
index 000000000..c54530812
--- /dev/null
+++ b/include/bcd.h
@@ -0,0 +1,20 @@
+/* Permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+/* macros to translate to/from binary and binary-coded decimal (frequently
+ * found in RTC chips).
+ */
+
+#ifndef _BCD_H
+#define _BCD_H
+
+#define BCD2BIN(val)	(((val) & 0x0f) + ((val)>>4)*10)
+#define BIN2BCD(val)	((((val)/10)<<4) + (val)%10)
+
+/* backwards compat */
+#define BCD_TO_BIN(val) ((val)=BCD2BIN(val))
+#define BIN_TO_BCD(val) ((val)=BIN2BCD(val))
+
+#endif /* _BCD_H */
diff --git a/include/common.h b/include/common.h
index aca281bda..493417f87 100644
--- a/include/common.h
+++ b/include/common.h
@@ -63,19 +63,13 @@ typedef volatile unsigned char	vu_char;
 #endif
 #elif defined(CONFIG_5xx)
 #include <asm/5xx_immap.h>
-#define CONFIG_RELOC_FIXUP_WORKS
 #elif defined(CONFIG_MPC5xxx)
 #include <mpc5xxx.h>
-#define CONFIG_RELOC_FIXUP_WORKS
 #elif defined(CONFIG_MPC512X)
 #include <mpc512x.h>
 #include <asm/immap_512x.h>
-#define CONFIG_RELOC_FIXUP_WORKS
 #elif defined(CONFIG_MPC8220)
 #include <asm/immap_8220.h>
-#define CONFIG_RELOC_FIXUP_WORKS
-#elif defined(CONFIG_824X)
-#define CONFIG_RELOC_FIXUP_WORKS
 #elif defined(CONFIG_8260)
 #if   defined(CONFIG_MPC8247) \
    || defined(CONFIG_MPC8248) \
@@ -87,7 +81,6 @@ typedef volatile unsigned char	vu_char;
 #define CONFIG_MPC8260	1
 #endif
 #include <asm/immap_8260.h>
-#define CONFIG_RELOC_FIXUP_WORKS
 #endif
 #ifdef CONFIG_MPC86xx
 #include <mpc86xx.h>
@@ -100,7 +93,6 @@ typedef volatile unsigned char	vu_char;
 #ifdef CONFIG_MPC83XX
 #include <mpc83xx.h>
 #include <asm/immap_83xx.h>
-#define CONFIG_RELOC_FIXUP_WORKS
 #endif
 #ifdef	CONFIG_4xx
 #include <ppc4xx.h>
@@ -137,20 +129,21 @@ typedef void (interrupt_handler_t)(void *);
 
 /*
  * enable common handling for all TQM8xxL/M boards:
- * - CONFIG_TQM8xxM will be defined for all TQM8xxM and TQM885D boards
+ * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
+ *                  and for the TQM885D board
  */
 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
-    defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) || \
-    defined(CONFIG_TQM885D)
+    defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
 # ifndef CONFIG_TQM8xxM
 #  define CONFIG_TQM8xxM
 # endif
 #endif
 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
     defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
-    defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM)
+    defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
+    defined(CONFIG_TQM885D)
 # ifndef CONFIG_TQM8xxL
 #  define CONFIG_TQM8xxL
 # endif
@@ -266,7 +259,7 @@ void	pciinfo	      (int, int);
     int	   pci_pre_init	       (struct pci_controller * );
 #endif
 
-#if defined(CONFIG_PCI) && defined(CONFIG_440)
+#if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
 #   if defined(CFG_PCI_TARGET_INIT)
 	void	pci_target_init	     (struct pci_controller *);
 #   endif
@@ -274,7 +267,7 @@ void	pciinfo	      (int, int);
 	void	pci_master_init	     (struct pci_controller *);
 #   endif
     int	    is_pci_host		(struct pci_controller *);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_405EX)
    void pcie_setup_hoses(int busno);
 #endif
 #endif
@@ -505,6 +498,7 @@ ulong	get_bus_freq  (ulong);
 #if defined(CONFIG_MPC85xx)
 typedef MPC85xx_SYS_INFO sys_info_t;
 void	get_sys_info  ( sys_info_t * );
+ulong	get_ddr_freq  (ulong);
 #endif
 #if defined(CONFIG_MPC86xx)
 typedef MPC86xx_SYS_INFO sys_info_t;
@@ -513,15 +507,13 @@ void   get_sys_info  ( sys_info_t * );
 
 #if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
 #  if defined(CONFIG_440)
-    typedef PPC440_SYS_INFO sys_info_t;
 #	if defined(CONFIG_440SPE)
 	 unsigned long determine_sysper(void);
 	 unsigned long determine_pci_clock_per(void);
-	 int ppc440spe_revB(void);
 #	endif
-#  else
-    typedef PPC405_SYS_INFO sys_info_t;
 #  endif
+typedef PPC4xx_SYS_INFO sys_info_t;
+int	ppc440spe_revB(void);
 void	get_sys_info  ( sys_info_t * );
 #endif
 
diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
index 46329918e..5d28168fb 100644
--- a/include/configs/ADCIOP.h
+++ b/include/configs/ADCIOP.h
@@ -191,15 +191,6 @@
 #define CFG_ETH_DEV_FN	     0x0000
 #define CFG_ETH_IOBASE	     0x0fff0000
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		2048	/* For PLX IOP480			*/
-#define CFG_CACHELINE_SIZE	16	/* For AMCC 401/403 CPUs		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index d25aa74a4..d490b33bd 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -193,14 +193,6 @@
 #define CFG_ENV_ADDR	    \
     (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 0f301ec0c..50f09b03f 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -213,16 +213,6 @@
 #define CFG_ENV_ADDR_REDUND     0xFFFA0000
 #define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 9adbba954..85c6a992d 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -258,16 +258,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index ae32f6b14..7029dbdde 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -181,15 +181,6 @@
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 21cd9c1f2..285cd5c0e 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -273,16 +273,6 @@
 #define CFG_EEPROM_WREN         1
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 #define CFG_PLD_BASE            0xf0000000
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index a3717b905..58900c309 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -223,16 +223,6 @@
 
 #define CFG_EEPROM_WREN         1
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 1b948f638..bd43e1dc9 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -266,15 +266,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index fb71c5fb0..b248639fd 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -317,16 +317,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 49943195b..1e9597dc6 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -288,16 +288,6 @@
 #define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
 #define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 29f929244..a8029eae9 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -319,16 +319,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
deleted file mode 100644
index 318ada1a4..000000000
--- a/include/configs/CPCI440.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * (C) Copyright 2002
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************
- * board/config_CPCI440.h - configuration for esd CPCI-440 board
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_CPCI440		1	    /* Board is ebony		*/
-#define CONFIG_440GP		1	    /* Specifc GP support	*/
-#define CONFIG_440		1	    /* ... PPC440 family	*/
-#define CONFIG_4xx		1	    /* ... PPC4xx family	*/
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
-#undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
-#define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
-#define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#if 1
-#define CFG_MONITOR_BASE    0xfffc0000	    /* start of monitor		*/
-#else
-#define CFG_MONITOR_BASE    0x01fc0000	    /* start of monitor		*/
-#endif
-#define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
-#define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
-
-#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE  128		    /* num bytes initial data	*/
-
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN	    (192 * 1024)    /* Reserve 192 kB for Mon	*/
-#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#undef CFG_EXT_SERIAL_CLOCK /*	 (1843200 * 6)	 / * Ext clk @ 11.059 MHz */
-#define CONFIG_BAUDRATE		9600
-
-#define CFG_BAUDRATE_TABLE  \
-    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#if 1 /* test-only */
-
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank		*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection		*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#undef CFG_FLASH_BASE
-#define CFG_FLASH_BASE		0xFF800000 /* test-only...*/
-
-#else /* test-only */
-
-#define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	32		    /* sectors per device   */
-
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#if 0 /* test-only */
-#define CFG_ENV_IS_IN_NVRAM	1	    /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
-#undef	CFG_ENV_IS_IN_EEPROM		    /* ... not in EEPROM	*/
-
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-#else
-
-#if 0 /* test-only */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x010	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
-				   /* total size of a CAT24WC16 is 2048 bytes */
-#else
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC16) for environment
- */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
-					/* 16 byte page write mode using*/
-					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-
-#endif
-
-#undef	CONFIG_BOOTARGS
-#undef	CONFIG_BOOTCOMMAND
-
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-#define CONFIG_BAUDRATE		9600
-
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		1	/* PHY address			*/
-#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#undef CONFIG_SPD_EEPROM       /* don't use SPD EEPROM for setup    */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-#if 0 /* test-only */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#endif
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#if 0
-#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
-#define PCI_HOST_FORCE	1		/* configure as pci host	*/
-#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
-
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-					/* resource configuration	*/
-
-#define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
-
-#define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
-
-#define CFG_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
-#endif
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-
-/* Configuration Port location */
-#define CONFIG_PORT_ADDR	0xF0000500
-
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS	0x50
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-#endif	/* __CONFIG_H */
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index c7b623a1d..78b754c19 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -205,15 +205,6 @@
 #define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index a965c125f..2356858d8 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -192,12 +192,6 @@
 #define CFG_MEMTEST_END		(CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
 /* END ENVIRONNEMENT FLASH */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration.  Only used to ..?? clear it, I guess..
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
index 627ea1482..117a1367c 100644
--- a/include/configs/DASA_SIM.h
+++ b/include/configs/DASA_SIM.h
@@ -182,15 +182,6 @@
 #define CFG_PCI9054_DEV_FN   0x0800
 #define CFG_PCI9054_IOBASE   0x0eff0000
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		2048	/* For PLX IOP480			*/
-#define CFG_CACHELINE_SIZE	16	/* For AMCC 401/403 CPUs		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 2eadbea35..912fb2af1 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -242,16 +242,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 5c595f57d..c8bf67fe9 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -232,15 +232,6 @@
 #define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index 5d48d2bbb..dc15b0c34 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -323,14 +323,6 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index a3f38bb3a..251227c7f 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -205,10 +205,6 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-/* Cache configuration */
-#define CFG_DCACHE_SIZE		8192
-#define CFG_CACHELINE_SIZE	32
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 9c713c6c2..c12ce48b6 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -331,16 +331,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 8967b3fc6..18e5b3c28 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -363,16 +363,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's    */
-					/* have only 8kB, 16kB is save here     */
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index 02ae5d005..f8b026212 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -224,11 +224,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 1ff710813..a389d582d 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -257,16 +257,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index ea3b0b4a3..5b40ef6b4 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -279,15 +279,6 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405GPr CPUs	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 3644e4388..816e63ba2 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -281,14 +281,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE	      8192	     /* For AMCC 405 CPUs	*/
-#define CFG_CACHELINE_SIZE    32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 8d7ec5926..d61b49eee 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -346,14 +346,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE	      8192	     /* For AMCC 405 CPUs	*/
-#define CFG_CACHELINE_SIZE    32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 5b526a099..9ddf82b3e 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -258,15 +258,6 @@
 */
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		0x4000	/* For AMCC 405GPr CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * Logbuffer Configuration
  */
 #undef CONFIG_LOGBUFFER 	/* supported but not enabled */
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index f488275f2..66dae2192 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -201,14 +201,6 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index be603ac11..35e1d6306 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -298,13 +298,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8540@0"
-#define OF_SOC			"soc8540@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8540@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 #define CFG_64BIT_VSPRINTF	1
 #define CFG_64BIT_STRTOUL	1
@@ -424,6 +420,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -441,6 +438,7 @@
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 8dda6651e..d2e723789 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8541@0"
-#define OF_SOC			"soc8541@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8541@e0000000/serial@4600"
-#define OF_PCI			"pci@e0008000"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index f580ccade..545a76cc6 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -40,6 +40,7 @@
 #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
 #define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -198,6 +199,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK	0x40    /* Reset altbank mask*/
 
 
 /* define to use L1 as initial stack */
@@ -250,13 +252,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8544@0"
-#define OF_SOC			"soc8544@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8544@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
@@ -409,6 +407,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -425,6 +424,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
@@ -474,10 +474,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ETHADDR	00:E0:0C:02:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR	00:E0:0C:02:01:FD
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR	00:E0:0C:02:02:FD
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR	00:E0:0C:02:03:FD
 #endif
 
 #define CONFIG_IPADDR	192.168.1.251
@@ -487,8 +483,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_BOOTFILE	8544ds/uImage.uboot
 #define CONFIG_UBOOTPATH	8544ds/u-boot.bin	/* TFTP server */
 
-#define CONFIG_SERVERIP	192.168.0.1
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP	192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
 #define CONFIG_NETMASK	255.255.0.0
 
 #define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
@@ -498,65 +494,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_BAUDRATE	115200
 
-#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
-	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e;"		\
-	"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"	\
-	"pci d.w $b.0 56 1;"			\
-	"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;"	\
-	"pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \
-	"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
-	"pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
- "pcie1regs=setenv a e000a; run pciereg\0"	\
- "pcie2regs=setenv a e0009; run pciereg\0"	\
- "pcie3regs=setenv a e000b; run pciereg\0"	\
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie2cfg=setenv b 5; run pciecfg\0" \
- "pcie3cfg=setenv b 0; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0"	\
- "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0"	\
- "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0"	\
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"	\
- "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0"	\
- "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
-#else
-#define	PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
-	"echo e;md ${a}e00 9\0"			\
- "pci1regs=setenv a e0008; run pcireg\0"	\
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
-	"pci d.w $b.0 56 1\0"			\
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
-	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"		\
- "pci1err=setenv a e0008; setenv b 7; run pcierr\0"		\
- "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
-#else
-#define	PCI_ENV ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
-	"md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
-	"echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
@@ -569,29 +506,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  "consoledev=ttyS0\0"				\
  "ramdiskaddr=2000000\0"			\
  "ramdiskfile=8544ds/ramdisk.uboot\0"		\
- "dtbaddr=c00000\0"				\
- "dtbfile=8544ds/mpc8544ds.dtb\0"		\
- "bdev=sda3\0"					\
- "eoi=mw e00400b0 0\0"				\
- "iack=md e00400a0 1\0"				\
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
-	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0"		\
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
-	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0"	\
- "guregs=setenv a e00e0; run gureg\0"		\
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0"		\
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV	\
- PCI_ENV	\
- ENET_ENV
-
+ "fdtaddr=c00000\0"				\
+ "fdtfile=8544ds/mpc8544ds.dtb\0"		\
+ "bdev=sda3\0"
 
 #define CONFIG_NFSBOOTCOMMAND		\
  "setenv bootargs root=/dev/nfs rw "	\
@@ -599,23 +516,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr - $dtbaddr"
-
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND		\
  "setenv bootargs root=/dev/ram rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $ramdiskaddr $ramdiskfile;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr $ramdiskaddr $dtbaddr"
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND		\
  "setenv bootargs root=/dev/$bdev rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr - $dtbaddr"
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 4edc7fd2b..3f382e59a 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -42,6 +42,7 @@
 #undef CONFIG_RIO
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -333,14 +334,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8548@0"
-#define OF_SOC			"soc8548@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8548@e0000000/serial@4600"
-#define OF_PCI			"pci@e0008000"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -483,6 +479,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -495,6 +492,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
@@ -568,72 +566,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_BAUDRATE	115200
 
-#if defined(CONFIG_PCIE1)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
-	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
-	"pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
-	"pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \
-	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\
-	"pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"
-#else
-#define	PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
-	"echo e;md ${a}e00 9\0" \
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \
-	"pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
-	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"
-#else
-#define	PCI_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV1 \
- "pci1regs=setenv a e0008; run pcireg\0" \
- "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \
- "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0"
-#else
-#define	PCI_ENV1 ""
-#endif
-
-#if defined(CONFIG_PCI2)
-#define PCI_ENV2 \
- "pci2regs=setenv a e0009; run pcireg\0" \
- "pci2err=setenv a e0009; setenv b 123; run pcierr\0"	\
- "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0"
-#else
-#define	PCI_ENV2 ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
-	"md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
-	"echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet2regs=setenv a e0025; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0" \
- "enet4regs=setenv a e0027; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
@@ -647,28 +579,7 @@ extern unsigned long get_clock_freq(void);
  "ramdiskaddr=2000000\0"			\
  "ramdiskfile=ramdisk.uboot\0"			\
  "fdtaddr=c00000\0"				\
- "fdtfile=mpc8548cds.dtb\0"			\
- "eoi=mw e00400b0 0\0"				\
- "iack=md e00400a0 1\0"				\
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
-	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0"		\
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
-	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0"	\
- "guregs=setenv a e00e0; run gureg\0"		\
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV \
- PCI_ENV \
- PCI_ENV1 \
- PCI_ENV2 \
- ENET_ENV
+ "fdtfile=mpc8548cds.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND						\
    "setenv bootargs root=/dev/nfs rw "					\
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index c414bf033..90ef3d6b6 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8555@0"
-#define OF_SOC			"soc8555@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8555@e0000000/serial@4600"
-#define OF_PCI			"pci@e0008000"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index a8f362fa1..d4e0de0d3 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -289,13 +289,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8560@0"
-#define OF_SOC			"soc8560@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8560@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -450,6 +446,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -471,6 +468,7 @@
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x1000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 
@@ -525,6 +523,8 @@
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR    192.168.1.253
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 548e1582a..59f490e85 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -33,7 +33,11 @@
 #define CONFIG_MPC8568		1	/* MPC8568 specific */
 #define CONFIG_MPC8568MDS	1	/* MPC8568MDS board specific */
 
-#define CONFIG_PCI
+#define CONFIG_PCI		1	/* Enable PCI/PCIE */
+#define CONFIG_PCI1		1	/* PCI controller */
+#define CONFIG_PCIE1		1	/* PCIE controller */
+#define CONFIG_FSL_PCI_INIT	1	/* use common fsl pci init code */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_QE			/* Enable QE */
 #define CONFIG_ENV_OVERWRITE
@@ -87,6 +91,9 @@ extern unsigned long get_clock_freq(void);
 #define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
+#define CFG_PCI1_ADDR           (CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR          (CFG_CCSRBAR+0xa000)
+
 /*
  * DDR Setup
  */
@@ -290,14 +297,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8568@0"
-#define OF_SOC			"soc8568@e0000000"
-#define OF_QE			"qe@e0080000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8568@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -325,20 +327,15 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI1_IO_PHYS	0xe2000000
 #define CFG_PCI1_IO_SIZE	0x00800000	/* 8M */
 
-#define CFG_PEX_MEM_BASE	0xa0000000
-#define CFG_PEX_MEM_PHYS	CFG_PEX_MEM_BASE
-#define CFG_PEX_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PEX_IO_BASE		0x00000000
-#define CFG_PEX_IO_PHYS		0xe2800000
-#define CFG_PEX_IO_SIZE		0x00800000	/* 8M */
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe2800000
+#define CFG_PCIE1_IO_SIZE	0x00800000	/* 8M */
 
 #define CFG_SRIO_MEM_BASE	0xc0000000
 
-#if defined(CONFIG_PCI)
-
-#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
-
 #ifdef CONFIG_QE
 /*
  * QE UEC ethernet configuration
@@ -377,12 +374,22 @@ extern unsigned long get_clock_freq(void);
 #endif
 #endif /* CONFIG_QE */
 
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS      0x00000000
+#define CFG_PCI_MEMORY_PHYS     0x00000000
+#define CFG_PCI_MEMORY_SIZE     0x80000000
+
 #endif	/* CONFIG_PCI */
 
 #ifndef CONFIG_NET_MULTI
@@ -440,6 +447,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -452,6 +460,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
new file mode 100644
index 000000000..55df5aa10
--- /dev/null
+++ b/include/configs/MPC8610HPCD.h
@@ -0,0 +1,692 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * MPC8610HPCD board configuration file
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MPC86xx		1	/* MPC86xx */
+#define CONFIG_MPC8610		1	/* MPC8610 specific */
+#define CONFIG_MPC8610HPCD	1	/* MPC8610HPCD board specific */
+#define CONFIG_NUM_CPUS		1	/* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
+
+#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
+#ifdef RUN_DIAG
+#define CFG_DIAG_ADDR		0xff800000
+#endif
+
+#define CFG_RESET_ADDRESS	0xfff00100
+
+#define CONFIG_PCI		1	/* Enable PCI/PCIE*/
+#define CONFIG_PCI1		1	/* PCI controler 1 */
+#define CONFIG_PCIE1		1	/* PCIe 1 connected to ULI bridge */
+#define CONFIG_PCIE2		1	/* PCIe 2 connected to slot */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM		/* Use SPD for DDR */
+#undef CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+#undef  CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+#define CONFIG_ALTIVEC		1
+
+/*
+ * L2CR setup -- make sure this is right for your board!
+ */
+#define CFG_L2
+#define L2_INIT		0
+#define L2_ENABLE	(L2CR_L2E |0x00100000 )
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+#define CONFIG_MISC_INIT_R		1
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
+#define CFG_MEMTEST_END		0x00400000
+#define CFG_ALT_MEMTEST
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
+#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
+
+#define CFG_DIU_ADDR		(CFG_CCSRBAR+0x2c000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define MPC86xx_DDR_SDRAM_CLK_CNTL
+
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS1		0x51		/* DDR DIMM */
+#else
+/*
+ * Manually set up DDR1 parameters
+ */
+
+#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+
+#if 0 /* TODO */
+#define CFG_DDR_CS0_BNDS	0x0000000F
+#define CFG_DDR_CS0_CONFIG	0x80010202	/* Enable, no interleaving */
+#define CFG_DDR_EXT_REFRESH	0x00000000
+#define CFG_DDR_TIMING_0	0x00260802
+#define CFG_DDR_TIMING_1	0x3935d322
+#define CFG_DDR_TIMING_2	0x14904cc8
+#define CFG_DDR_MODE_1		0x00480432
+#define CFG_DDR_MODE_2		0x00000000
+#define CFG_DDR_INTERVAL	0x06180100
+#define CFG_DDR_DATA_INIT	0xdeadbeef
+#define CFG_DDR_CLK_CTRL	0x03800000
+#define CFG_DDR_OCD_CTRL	0x00000000
+#define CFG_DDR_OCD_STATUS	0x00000000
+#define CFG_DDR_CONTROL		0xe3008000	/* Type = DDR2 */
+#define CFG_DDR_CONTROL2	0x04400010
+
+#define CFG_DDR_ERR_INT_EN	0x00000000
+#define CFG_DDR_ERR_DIS		0x00000000
+#define CFG_DDR_SBE		0x000f0000
+ /* Not used in fixed_sdram function */
+#define CFG_DDR_MODE		0x00000022
+#define CFG_DDR_CS1_BNDS	0x00000000
+#define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
+#endif
+#endif
+
+#define CFG_ID_EEPROM
+#define ID_EEPROM_ADDR		0x57
+
+
+#define CFG_FLASH_BASE		0xf0000000 /* start of FLASH 128M */
+#define CFG_FLASH_BASE2		0xf8000000
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_BR0_PRELIM		0xf8001001 /* port size 16bit */
+#define CFG_OR0_PRELIM		0xf8006e65 /* 128MB NOR Flash*/
+
+#define CFG_BR1_PRELIM		0xf0001001 /* port size 16bit */
+#define CFG_OR1_PRELIM		0xf8006e65 /* 128MB Promjet */
+#if 0 /* TODO */
+#define CFG_BR2_PRELIM		0xf0000000
+#define CFG_OR2_PRELIM		0xf0000000 /* 256MB NAND Flash - bank 1 */
+#endif
+#define CFG_BR3_PRELIM		0xe8000801 /* port size 8bit */
+#define CFG_OR3_PRELIM		0xfff06ff7 /* 1MB PIXIS area*/
+
+
+#define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
+#define PIXIS_BASE	0xe8000000	/* PIXIS registers */
+#define PIXIS_ID		0x0	/* Board ID at offset 0 */
+#define PIXIS_VER		0x1	/* Board version at offset 1 */
+#define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST		0x4	/* PIXIS Reset Control register */
+#define PIXIS_AUX		0x6	/* PIXIS Auxiliary register; Scratch */
+#define PIXIS_SPD		0x7	/* Register for SYSCLK speed */
+#define PIXIS_BRDCFG0		0x8	/* PIXIS Board Configuration Register0*/
+#define PIXIS_VCTL		0x10	/* VELA Control Register */
+#define PIXIS_VCFGEN0		0x12	/* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1		0x13	/* VELA Config Enable 1 */
+#define PIXIS_VBOOT		0x16	/* VELA VBOOT Register */
+#define PIXIS_VSPEED0		0x17	/* VELA VSpeed 0 */
+#define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
+#define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
+#define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK	0x0C    /* Reset altbank mask*/
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef	CFG_RAMBOOT
+#endif
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_SPD_EEPROM
+#define CFG_SDRAM_SIZE	256
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#ifndef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#else
+#define CFG_INIT_RAM_ADDR	0xe4000000	/* Initial RAM address */
+#endif
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CFG_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree to kernel
+ */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU		"PowerPC,8610@0"
+#define OF_SOC		"soc@e0000000"
+#define OF_TBCLK	(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH	"/soc@e0000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF	1
+#define CFG_64BIT_STRTOUL	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe1000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+/* For RTL8139 */
+#define KSEG1ADDR(x)	({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
+#define _IO_BASE		0x00000000
+
+/* controller 1, Base address 0xa000 */
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/* 1M */
+
+/* controller 2, Base Address 0x9000 */
+#define CFG_PCIE2_MEM_BASE	0x90000000
+#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
+#define CFG_PCIE2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCIE2_IO_BASE	0x00000000	/* reuse mem LAW */
+#define CFG_PCIE2_IO_PHYS	0xe2000000
+#define CFG_PCIE2_IO_SIZE	0x00100000	/* 1M */
+
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_NET
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#define CONFIG_RTL8139
+#define CONFIG_SK98
+#define CONFIG_EEPRO100
+#define CONFIG_TULIP
+#ifdef CONFIG_TULIP
+#define CONFIG_ETHADDR   00:E0:0C:00:00:01
+#endif
+
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_PCI_OHCI		1
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_USB_KEYBOARD	1
+#define CFG_DEVICE_DEREGISTER
+#define CFG_USB_EVENT_POLL	1
+#define CFG_USB_OHCI_SLOT_NAME 	"ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_OHCI_SWAP_REG_ACCESS	1
+
+#if !defined(CONFIG_PCI_PNP)
+#define PCI_ENET0_IOADDR	0xe0000000
+#define PCI_ENET0_MEMADDR	0xe0000000
+#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID	4
+#define CFG_SCSI_MAX_LUN	1
+#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#endif
+
+#endif	/* CONFIG_PCI */
+
+/*
+ * BAT0		2G	Cacheable, non-guarded
+ * 0x0000_0000	2G	DDR
+ */
+#define CFG_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
+#define CFG_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CFG_IBAT0U	CFG_DBAT0U
+
+/*
+ * BAT1		1G	Cache-inhibited, guarded
+ * 0x8000_0000	256M	PCI-1 Memory
+ * 0xa000_0000	256M	PCI-Express 1 Memory
+ * 0x9000_0000	256M	PCI-Express 2 Memory
+ */
+
+#define CFG_DBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U	(CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CFG_IBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U	CFG_DBAT1U
+
+/*
+ * BAT2		16M	Cache-inhibited, guarded
+ * 0xe100_0000	1M	PCI-1 I/O
+ */
+
+#define CFG_DBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U	(CFG_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U	CFG_DBAT2U
+
+/*
+ * BAT3		32M	Cache-inhibited, guarded
+ * 0xe200_0000	1M	PCI-Express 2 I/O
+ * 0xe300_0000	1M	PCI-Express 1 I/O
+ */
+
+#define CFG_DBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	(CFG_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U	CFG_DBAT3U
+
+/*
+ * BAT4		4M	Cache-inhibited, guarded
+ * 0xe000_0000	4M	CCSR
+ */
+#define CFG_DBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U	(CFG_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U	CFG_DBAT4U
+
+/*
+ * BAT5		128K	Cacheable, non-guarded
+ * 0xe400_0000	128K	Init RAM for stack in the CPU DCache (no backing memory)
+ */
+#define CFG_DBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L	CFG_DBAT5L
+#define CFG_IBAT5U	CFG_DBAT5U
+
+/*
+ * BAT6		256M	Cache-inhibited, guarded
+ * 0xf000_0000	256M	FLASH
+ */
+#define CFG_DBAT6L	(CFG_FLASH_BASE	 | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U	(CFG_FLASH_BASE	 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L	(CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	CFG_DBAT6U
+
+/*
+ * BAT7		4M	Cache-inhibited, guarded
+ * 0xe800_0000	4M	PIXIS
+ */
+#define CFG_DBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT7U	(PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT7U	CFG_DBAT7U
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_SECT_SIZE	0x20000	/* 126k (one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+#else
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_CMD_ENV
+#endif
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_USB
+#endif
+
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*DIU Configuration*/
+#define DIU_CONNECT_TO_DVI		/* DIU controller connects to DVI encoder*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_IPADDR		192.168.1.100
+
+#define CONFIG_HOSTNAME		unknown
+#define CONFIG_ROOTPATH		/opt/nfsroot
+#define CONFIG_BOOTFILE		uImage
+#define CONFIG_UBOOTPATH	8610hpcd/u-boot.bin
+
+#define CONFIG_SERVERIP		192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
+#define CONFIG_NETMASK		255.255.255.0
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		1000000
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	115200
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+	"echo e;md ${a}e00 9\0" \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+	"pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
+	"pci w.w $b.0 56 ffff\0"	\
+ "pci1err=setenv a e0008; run pcierr\0"	\
+ "pci1errc=setenv a e0008; run pcierrc\0"
+#else
+#define	PCI_ENV ""
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0"	\
+ "pcie2regs=setenv a e0009; run pciereg\0"	\
+ "pcieerr=md ${a}020 1; md ${a}e00; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"\
+	"pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;"	\
+	"pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;"\
+	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;" \
+	"pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0"		\
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
+ "pcie1err=setenv a e000a; run pcieerr\0"	\
+ "pcie2err=setenv a e0009; run pcieerr\0"	\
+ "pcie1errc=setenv a e000a; run pcieerrc\0"	\
+ "pcie2errc=setenv a e0009; run pcieerrc\0"
+#else
+#define	PCIE_ENV ""
+#endif
+
+#define DMA_ENV \
+ "dma0=mw ${d}104 ffffffff;mw ${d}110 50000;mw ${d}114 $sad0;mw ${d}118 50000;"\
+	"mw ${d}120 $bc0;mw ${d}100 f03c404; mw ${d}11c $dad0; md ${d}100 9\0" \
+ "dma1=mw ${d}184 ffffffff;mw ${d}190 50000;mw ${d}194 $sad1;mw ${d}198 50000;"\
+	"mw ${d}1a0 $bc1;mw ${d}180 f03c404; mw ${d}19c $dad1; md ${d}180 9\0" \
+ "dma2=mw ${d}204 ffffffff;mw ${d}210 50000;mw ${d}214 $sad2;mw ${d}218 50000;"\
+	"mw ${d}220 $bc2;mw ${d}200 f03c404; mw ${d}21c $dad2; md ${d}200 9\0" \
+ "dma3=mw ${d}284 ffffffff;mw ${d}290 50000;mw ${d}294 $sad3;mw ${d}298 50000;"\
+	"mw ${d}2a0 $bc3;mw ${d}280 f03c404; mw ${d}29c $dad3; md ${d}280 9\0"
+
+#ifdef ENV_DEBUG
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "netdev=eth0\0"						\
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+ "tftpflash=tftpboot $loadaddr $uboot; "			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+ "consoledev=ttyS0\0"						\
+ "ramdiskaddr=2000000\0"					\
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0"				\
+ "dtbaddr=c00000\0"						\
+ "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0"				\
+ "bdev=sda3\0"					\
+ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+ "maxcpus=1"	\
+ "eoi=mw e00400b0 0\0"						\
+ "iack=md e00400a0 1\0"						\
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4;" \
+	"md ${a}bf0 4; md ${a}e00 3; md ${a}e20 3; md ${a}e40 7;" \
+	"md ${a}f00 5\0" \
+ "ddr1regs=setenv a e0002; run ddrreg\0" \
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}800 1;" \
+	"md ${a}900 6; md ${a}a00 1; md ${a}b20 3; md ${a}e00 1;" \
+	"md ${a}e60 1; md ${a}ef0 1d\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
+ "mcmreg=md ${a}000 1b; md ${a}bf8 2; md ${a}e00 5\0" \
+ "mcmregs=setenv a e0001; run mcmreg\0" \
+ "diuregs=md e002c000 1d\0" \
+ "dium=mw e002c01c\0" \
+ "diuerr=md e002c014 1\0" \
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \
+ "monitor=0-DVI\0" \
+ "pmregs=md e00e1000 2b\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCI_ENV \
+ PCIE_ENV \
+ DMA_ENV
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS                               \
+ "netdev=eth0\0"                                                \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
+ "consoledev=ttyS0\0"                                           \
+ "ramdiskaddr=2000000\0"                                        \
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0"                         \
+ "dtbaddr=c00000\0"                                             \
+ "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0"                          \
+ "bdev=sda3\0"							\
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\
+ "monitor=0-DVI\0"
+#endif
+
+#define CONFIG_NFSBOOTCOMMAND					\
+ "setenv bootargs root=/dev/nfs rw "				\
+	"nfsroot=$serverip:$rootpath "				\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"		\
+ "tftp $loadaddr $bootfile;"					\
+ "tftp $dtbaddr $dtbfile;"					\
+ "bootm $loadaddr - $dtbaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw "				\
+	"console=$consoledev,$baudrate $othbootargs;"		\
+ "tftp $ramdiskaddr $ramdiskfile;"				\
+ "tftp $loadaddr $bootfile;"					\
+ "tftp $dtbaddr $dtbfile;"					\
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND		\
+ "setenv bootargs root=/dev/$bdev rw "	\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+ "tftp $loadaddr $bootfile;"		\
+ "tftp $dtbaddr $dtbfile;"		\
+ "bootm $loadaddr - $dtbaddr"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index aa6dbc47a..575bbae43 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -38,7 +38,6 @@
 #define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
 #define CONFIG_NUM_CPUS         2       /* Number of CPUs in the system */
 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
-#undef DEBUG
 
 #ifdef RUN_DIAG
 #define CFG_DIAG_ADDR        0xff800000
@@ -201,6 +200,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK	0x40    /* Reset altbank mask*/
 
 #define CFG_MAX_FLASH_BANKS	2		/* number of banks */
 #define CFG_MAX_FLASH_SECT	128		/* sectors per device */
@@ -266,13 +266,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Pass open firmware flat tree to kernel
  */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define OF_CPU		"PowerPC,8641@0"
-#define OF_SOC		"soc8641@f8000000"
-#define OF_TBCLK	(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH	"/soc8641@f8000000/serial@4500"
 
 #define CFG_64BIT_VSPRINTF	1
 #define CFG_64BIT_STRTOUL	1
@@ -644,8 +641,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
    "consoledev=ttyS0\0"                                                 \
    "ramdiskaddr=2000000\0"						\
    "ramdiskfile=your.ramdisk.u-boot\0"                                  \
-   "dtbaddr=c00000\0"						\
-   "dtbfile=mpc8641_hpcn.dtb\0"                                  \
+   "fdtaddr=c00000\0"						\
+   "fdtfile=mpc8641_hpcn.dtb\0"                                  \
    "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
    "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
    "maxcpus=2"
@@ -657,16 +654,16 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "tftp $dtbaddr $dtbfile;"                                          \
-   "bootm $loadaddr - $dtbaddr"
+   "tftp $fdtaddr $fdtfile;"                                          \
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $loadaddr $bootfile;"                                          \
-   "tftp $dtbaddr $dtbfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr $dtbaddr"
+   "tftp $fdtaddr $fdtfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 5840ea25f..94b5bc965 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -222,15 +222,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 937df229f..4e030885f 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -220,15 +220,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index d6e7082f6..e70c0d3d4 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -251,15 +251,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index efa015746..b83520d7c 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -231,15 +231,6 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 652210c19..0bd77c07b 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -288,6 +288,7 @@
 #define CFG_I2C_SLAVE		0x7F
 
 #define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
+#define CFG_EEPROM_WREN         1
 
 /* CAT24WC08/16... */
 #define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
@@ -300,16 +301,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
@@ -389,15 +380,16 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x40000550
+#define CFG_GPIO0_OSRH		0x00000550
 #define CFG_GPIO0_OSRL		0x00000110
 #define CFG_GPIO0_ISR1H		0x00000000
 #define CFG_GPIO0_ISR1L		0x15555445
 #define CFG_GPIO0_TSRH		0x00000000
 #define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0014
+#define CFG_GPIO0_TCR		0x77FE0014
 
 #define CFG_DUART_RST		(0x80000000 >> 14)
+#define CFG_EEPROM_WP		(0x80000000 >> 0)
 
 /*
  * Internal Definitions
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index b29f368f5..adbe8a9fb 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -270,16 +270,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 #define FLASH0_BA	0xFF000000	    /* FLASH 0 Base Address		*/
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
new file mode 100644
index 000000000..3d2ed1e7d
--- /dev/null
+++ b/include/configs/PMC440.h
@@ -0,0 +1,522 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ * Based on the sequoia configuration file.
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * PMC440.h - configuration for esd PMC440 boards
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_440EPX		1	/* Specific PPC440EPx   */
+#define CONFIG_440		1	/* ... PPC440 family    */
+#define CONFIG_4xx		1	/* ... PPC4xx family    */
+
+#define CONFIG_SYS_CLK_FREQ	33333400
+
+#define CONFIG_4xx_DCACHE		/* enable dcache        */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r     */
+#define CONFIG_BOARD_TYPES	1	/* support board types  */
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(384  * 1024)	/* Reserve 384 kB for Monitor   */
+#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserve 256 kB for malloc()  */
+
+#define CONFIG_PRAM		0	/* use pram variable to overwrite */
+
+#define CFG_BOOT_BASE_ADDR	0xf0000000
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0          */
+#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH       */
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_NAND_ADDR		0xd0000000	/* NAND Flash           */
+#define CFG_OCM_BASE		0xe0010000	/* ocm                  */
+#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
+#define CFG_PCI_BASE		0xe0000000	/* Internal PCI regs    */
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory    */
+#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+#define CFG_PCI_MEMSIZE		0x80000000	/* 2GB! */
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals */
+
+#define CFG_USB2D0_BASE		0xe0000100
+#define CFG_USB_DEVICE		0xe0000000
+#define CFG_USB_HOST		0xe0000400
+#define CFG_FPGA_BASE0		0xef000000	/* 32 bit */
+#define CFG_FPGA_BASE1		0xef100000	/* 16 bit */
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
+#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM                  */
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256	/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI	1
+#undef CONFIG_UART1_CONSOLE	/* console on front panel */
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_EEPROM	1	/* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars */
+#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#endif
+
+/*-----------------------------------------------------------------------
+ * RTC
+ *----------------------------------------------------------------------*/
+#define CONFIG_RTC_RX8025
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI		/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER	/* Use common CFI driver        */
+
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip    */
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)      */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)      */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)     */
+#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection        */
+
+#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash        */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector          */
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector     */
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_OFFSET		0	/* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE		0x1000	/* 4096 bytes may be used for env vars */
+#endif
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location                 */
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size                     */
+#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here    */
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr        */
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image   */
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image     */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	512	/* NAND chip page size          */
+#define CFG_NAND_BLOCK_SIZE	(16 << 10) /* NAND chip block size      */
+#define CFG_NAND_PAGE_COUNT	32	/* NAND chip page count         */
+#define CFG_NAND_BAD_BLOCK_POS	5	/* Location of bad block marker */
+#undef CFG_NAND_4_ADDR_CYCLE		/* No fourth addr used (<=32MB) */
+
+#define CFG_NAND_ECCSIZE	256
+#define CFG_NAND_ECCBYTES	3
+#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM	(256)	/* 256MB                        */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DDR_DATA_EYE	/* use DDR2 optimization        */
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
+#define CFG_I2C_SPEED		100000	/* I2C speed and slave address  */
+#define CFG_I2C_SLAVE		0x7F
+
+#define CONFIG_I2C_CMD_TREE	1
+#define CONFIG_I2C_MULTI_BUS	1
+
+#define CFG_I2C_MULTI_EEPROMS
+
+#define CFG_I2C_EEPROM_ADDR		0x54
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS	5
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
+
+#define CFG_EEPROM_WREN			1
+#define CFG_I2C_BOOT_EEPROM_ADDR	0x52
+
+/*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the TMP401
+ */
+#define CONFIG_DTT_SENSORS		{ 0, 1 }
+
+/*
+ * The PMC440 uses a TI TMP401 temperature sensor. This part
+ * is basically compatible to the ADM1021 that is supported
+ * by U-Boot.
+ *
+ * - i2c addr 0x4c
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 70 deg
+ * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
+ */
+#define CONFIG_DTT_ADM1021
+#define CFG_DTT_ADM1021		{ { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
+
+#define CONFIG_PREBOOT		/* enable preboot variable */
+
+#undef	CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME		pmc440
+#define CFG_BOOTFILE		"bootfile=/tftpboot/pmc440/uImage\0"
+#define CFG_ROOTPATH		"rootpath=/opt/eldk_410/ppc_4xx\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CFG_BOOTFILE							\
+	CFG_ROOTPATH							\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+	"nfsroot=${serverip}:${rootpath}\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"		\
+	":${hostname}:${netdev}:off panic=1\0"				\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
+	"flash_nfs=run nfsargs addip addtty;"				\
+	"bootm ${kernel_addr}\0"					\
+	"flash_self=run ramargs addip addtty;"				\
+	"bootm ${kernel_addr} ${ramdisk_addr}\0"			\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	"bootm\0"							\
+	"kernel_addr=FC000000\0"					\
+	"ramdisk_addr=FC180000\0"					\
+	"load=tftp 200000 /tftpboot/pmc440/u-boot.bin\0"		\
+	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+	"cp.b 200000 FFFA0000 60000\0"					\
+	""
+
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds     */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download  */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
+
+#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management           */
+#define CONFIG_PHY_ADDR		0	/* PHY address, See schematics  */
+
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	1
+#define CONFIG_RESET_PHY_R	1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
+
+#define CFG_USB_OHCI_BOARD_INIT 1
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
+#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+/* POST support */
+/* ethernet POST sometimes freezes the CPU.
+ * So disable it for now until issue is solved
+ */
+#if 0
+#define CONFIG_POST		(CFG_POST_MEMORY |	\
+				 CFG_POST_CPU    |	\
+				 CFG_POST_UART   |	\
+				 CFG_POST_I2C    |	\
+				 CFG_POST_CACHE  |	\
+				 CFG_POST_FPU    |	\
+				 CFG_POST_ETHER  |	\
+				 CFG_POST_SPR)
+#else
+#define CONFIG_POST		(CFG_POST_MEMORY |	\
+				 CFG_POST_CPU    |	\
+				 CFG_POST_UART   |	\
+				 CFG_POST_I2C    |	\
+				 CFG_POST_CACHE  |	\
+				 CFG_POST_FPU    |	\
+				 CFG_POST_SPR)
+#endif
+
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+
+/* esd expects pram at end of physical memory.
+ * So no logbuffer at the moment.
+ */
+#if 0
+#define CONFIG_LOGBUFFER
+#endif
+#define CFG_POST_CACHE_ADDR	0x10000000	/* free virtual address     */
+
+#define CFG_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
+
+#define CONFIG_SUPPORT_VFAT
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory         */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt       */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#endif
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS		16	/* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on          */
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM       */
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address      */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
+#define CONFIG_LOOPW		1	/* enable loopw command         */
+#define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CONFIG_AUTOBOOT_KEYED	1
+#define CONFIG_AUTOBOOT_PROMPT	"Press SPACE to abort autoboot in %d seconds\n"
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI		/* include pci support          */
+#define CONFIG_PCI_PNP		/* do (not) pci plug-and-play   */
+#define CFG_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP   */
+#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup  */
+#define CFG_PCI_TARGBASE	0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+/* PCI identification */
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh      */
+#define CFG_PCI_SUBSYS_ID_NONMONARCH 0x0441	/* PCI Device ID: Non-Monarch */
+#define CFG_PCI_SUBSYS_ID_MONARCH 0x0440	/* PCI Device ID: Monarch */
+#define CFG_PCI_CLASSCODE_NONMONARCH	PCI_CLASS_PROCESSOR_POWERPC
+#define CFG_PCI_CLASSCODE_MONARCH	PCI_CLASS_BRIDGE_HOST
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ *----------------------------------------------------------------------*/
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN2
+#define CONFIG_FPGA_SPARTAN3
+
+#define CONFIG_FPGA_COUNT	2
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/*
+ * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS		2	/* NAND chip connected to CSx   */
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP		0x03017200
+#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+
+/* Memory Bank 2 (NAND-FLASH) initialization */
+#define CFG_EBC_PB2AP		0x018003c0
+#define CFG_EBC_PB2CR		(CFG_NAND_ADDR | 0x1c000)
+#else
+#define CFG_NAND_CS		0	/* NAND chip connected to CSx   */
+/* Memory Bank 2 (NOR-FLASH) initialization */
+#define CFG_EBC_PB2AP		0x03017200
+#define CFG_EBC_PB2CR		(CFG_FLASH_BASE | 0xda000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
+#endif
+
+/* Memory Bank 4 (FPGA / 32Bit) initialization */
+#define CFG_EBC_PB4AP		0x03840f40	/* BME=0,TWT=7,CSN=1,TH=7,RE=1,SOR=0,BEM=1 */
+#define CFG_EBC_PB4CR		(CFG_FPGA_BASE0 | 0x1c000)	/* BS=1M,BU=R/W,BW=32bit */
+
+/* Memory Bank 5 (FPGA / 16Bit) initialization */
+#define CFG_EBC_PB5AP		0x03840f40	/* BME=0,TWT=3,CSN=1,TH=0,RE=1,SOR=0,BEM=1 */
+#define CFG_EBC_PB5CR		(CFG_FPGA_BASE1 | 0x1a000)	/* BS=1M,BU=R/W,BW=16bit */
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl. chips */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH     */
+#define BOOTFLAG_WARM	0x02	/* Software reboot                      */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 8a74c4f5c..c2aa2cc09 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -454,16 +454,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 1c6a9ae4f..ae8d9abac 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -335,7 +335,7 @@
 #else
 #define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
 #endif /* CONFIG_TQM5200_B */
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
@@ -392,6 +392,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 7a3801026..be5b4d3f5 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -192,11 +192,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index e8b6a80b1..a0c01b65a 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -188,15 +188,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index beeca6343..f51b12e30 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -179,11 +179,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index d5609c1d4..a725e71ca 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -177,15 +177,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index e35b5b2ac..16dc3ebe9 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -183,11 +183,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index cd5212eff..c4b459952 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -217,15 +217,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index d5838dbf3..ac22c1e8b 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -186,11 +186,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index fe3a2f020..8601de172 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -189,11 +189,14 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
@@ -368,7 +371,7 @@
  */
 #define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
 #define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
+#define	SDRAM_MAX_SIZE		0x08000000	/* max 128 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 #define CFG_OR_TIMING_SDRAM	0x00000A00
@@ -444,7 +447,10 @@
 #define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
+/* 10 column SDRAM */
+#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /*
  * Internal Definitions
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index f09d3d165..2bf4a2a35 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -186,14 +186,17 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
-
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
 #define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 039aa3af4..d42ffc9da 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -186,16 +186,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
-
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index ca3c16652..d7e5eebae 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -232,11 +232,14 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index f36b729cd..8a3aa4bc4 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -42,17 +42,10 @@
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
 #define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
 #define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
-#define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  50 MHz - CPU default clock	*/
+#define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  66 MHz - CPU default clock	*/
 						/* (it will be used if there is no	*/
 						/* 'cpuclk' variable with valid value)	*/
 
-#define CFG_MEASURE_CPUCLK			/* Measure real cpu clock	*/
-						/* (function measure_gclk()	*/
-						/* will be called)		*/
-#ifdef CFG_MEASURE_CPUCLK
-#define CFG_8XX_XIN		10000000	/* measure_gclk() needs this	*/
-#endif
-
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
@@ -83,9 +76,15 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM866M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"bootfile=/tftpboot/TQM885D/uImage\0"				\
+	"fdt_addr=400C0000\0"						\
+	"kernel_addr=40100000\0"					\
+	"ramdisk_addr=40280000\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=protect off 40000000 +${filesize};"			\
+		"erase 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"protect on 40000000 +${filesize}\0"			\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -144,7 +143,7 @@
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-#undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
+#undef CONFIG_RTC_MPC8xx		/* MPC885 does not support RTC	*/
 
 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
 
@@ -230,7 +229,7 @@
 #define CFG_FLASH_BASE		0x40000000
 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
@@ -242,16 +241,20 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector	*/
+#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment		*/
+#define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
@@ -434,26 +437,30 @@
 #define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
 
 /*
- * Memory Periodic Timer Prescaler
- * Periodic timer for refresh, start with refresh rate for 40 MHz clock
- * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK)
+ * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
+ *
+ *                        CPUclock(MHz) * 31.2
+ * CFG_MAMR_PTA = -----------------------------------     with DFBRG = 0
+ *                2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
+ *
+ * CPU clock =  15 MHz:  CFG_MAMR_PTA =  29   ->  4 * 7.73 us
+ * CPU clock =  50 MHz:  CFG_MAMR_PTA =  97   ->  4 * 7.76 us
+ * CPU clock =  66 MHz:  CFG_MAMR_PTA = 128   ->  4 * 7.75 us
+ * CPU clock = 133 MHz:  CFG_MAMR_PTA = 255   ->  4 * 7.67 us
+ *
+ * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
+ * be met also in the default configuration, i.e. if environment variable
+ * 'cpuclk' is not set.
  */
-#define CFG_MAMR_PTA		39
+#define CFG_MAMR_PTA		128
 
 /*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * Memory Periodic Timer Prescaler Register (MPTPR) values.
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16
+/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8
 
 /*
  * MAMR settings for SDRAM
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 14848abe5..3ca928ec9 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -52,9 +52,13 @@
 
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
+
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
@@ -204,8 +208,6 @@
 #define CFG_IDE_MAXBUS		2		/* max. 2 IDE busses	*/
 #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
-#define CONFIG_ATAPI		1	/* ATAPI for Travelstar		*/
-
 #define CFG_ATA_BASE_ADDR	0xF0100000
 #define CFG_ATA_IDE0_OFFSET	0x0000
 #define CFG_ATA_IDE1_OFFSET	0x0010
@@ -244,11 +246,6 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
-#endif
-
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
@@ -281,19 +278,12 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 
 #define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
-#if 0 /* test-only */
-/* CAT24WC08/16... */
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
-					/* 16 byte page write mode using*/
-					/* last 4 bits of the address	*/
-#else
+#define CFG_EEPROM_WREN         1
+
 /* CAT24WC32/64... */
 #define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
@@ -301,21 +291,10 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last 5 bits of the address	*/
-#endif
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
@@ -410,18 +389,20 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs -> GPIO
  */
-#define CFG_GPIO0_OSRH		0x40000550
+#define CFG_GPIO0_OSRH		0x00000550
 #define CFG_GPIO0_OSRL		0x00000110
 #define CFG_GPIO0_ISR1H		0x00000000
 #define CFG_GPIO0_ISR1L		0x15555440
 #define CFG_GPIO0_TSRH		0x00000000
 #define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0017
+#define CFG_GPIO0_TCR		0x777E0017
 
 #define CFG_DUART_RST		(0x80000000 >> 14)
 #define CFG_LCD_ENDIAN		(0x80000000 >> 7)
+#define CFG_IIC_ON		(0x80000000 >> 8)
 #define CFG_LCD0_RST		(0x80000000 >> 30)
 #define CFG_LCD1_RST		(0x80000000 >> 31)
+#define CFG_EEPROM_WP		(0x80000000 >> 0)
 
 /*
  * Internal Definitions
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 5512f4be2..ec6f20554 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -248,16 +248,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index fc177fb1f..7017fff5d 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -290,15 +290,6 @@
  */
 #define SPD_EEPROM_ADDRESS      0x50	/* XXX conflicting address!!! XXX */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192		/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32		/* ...		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above val. */
-#endif
-
 /*
  * Init Memory Controller:
  */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 20d693fa4..bfb3156f6 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -293,15 +293,6 @@
  */
 #define SPD_EEPROM_ADDRESS      0x50	/* XXX conflicting address!!! XXX */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192		/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32		/* ...		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above val. */
-#endif
-
 /*
  * Init Memory Controller:
  */
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 656784aa0..582d8cf86 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -254,16 +254,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 611f5a62c..38ea576a6 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -257,14 +257,6 @@ extern void out32(unsigned int, unsigned long);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192 /* For AMCC 440GX CPUs */
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index e3f6e2c8b..dc322dd55 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -385,15 +385,6 @@
 #define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384		/* For AMCC 405EZ CPU		*/
-#define CFG_CACHELINE_SIZE	32		/* ...				*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above value*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index bb1efdf6d..58060a8c8 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -231,7 +231,7 @@
 #define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 #if 0
-#define CFG_I2C_NOPROBES	{{0,0x69}}	* Don't probe these addrs */
+#define CFG_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
 #endif
 
 /*
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index d88c3ad43..aff9823d5 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -355,12 +355,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
new file mode 100644
index 000000000..194788b18
--- /dev/null
+++ b/include/configs/atstk1003.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7001		1
+#define CONFIG_ATSTK1003		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1			1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND						\
+	"mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
new file mode 100644
index 000000000..1bad171cb
--- /dev/null
+++ b/include/configs/atstk1004.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7002		1
+#define CONFIG_ATSTK1004		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1			1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND						\
+	"mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+#define CFG_SDRAM_16BIT			1
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 14c563808..d57744855 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -414,15 +414,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index 7736a1e32..eca195a9f 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -321,14 +321,6 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405EP CPU			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index c43b49737..a24478d0b 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -290,14 +290,6 @@
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*
- * Cache configuration
- *
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's */
-					/* have only 8kB, 16kB is save here  */
-#define CFG_CACHELINE_SIZE	32
-
-/*
  * Miscellaneous board specific definitions
  *
  */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index a7120aa57..064650cfc 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -289,14 +289,6 @@
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*
- * Cache configuration
- *
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's */
-					/* have only 8kB, 16kB is save here  */
-#define CFG_CACHELINE_SIZE	32
-
-/*
  * Miscellaneous board specific definitions
  *
  */
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 2c626a032..5faa9ebcd 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -293,14 +293,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index 577f459e2..b43b228fb 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -321,13 +321,6 @@
 #define CONFIG_PORT_ADDR	0xF0000500
 
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405GPr CPUs	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 90858819b..1214bc31b 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -364,13 +364,6 @@
 #define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 )
 #define HCU_HW_VERSION_REGISTER   ( CFG_CPLD + 0x1400000 )
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	      /* ...			            */
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 7908e5a47..0aa4f2dcc 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -62,7 +62,7 @@
 #define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
 
 #define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x01000000
+#define CFG_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
@@ -72,6 +72,9 @@
 #define CFG_PCIE1_XCFGBASE	0xc3001000
 #define CFG_PCIE2_XCFGBASE	0xc3002000
 
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
@@ -190,8 +193,14 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 		"bootm\0"						\
-	"rootpath=/opt/eldk/ppc_4xx\0"				\
+	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
+		"tftp ${fdt_addr} ${fdt_file};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000 - ${fdt_addr}\0"				\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=katmai/uImage\0"					\
+	"fdt_file=katmai/katmai.dtb\0"					\
+	"fdt_addr=400000\0"						\
 	"kernel_addr=fff10000\0"					\
 	"ramdisk_addr=fff20000\0"					\
 	"initrd_high=30000000\0"					\
@@ -202,6 +211,7 @@
 	"upd=run load;run update\0"					\
 	"kozio=bootm ffc60000\0"					\
 	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP:RP\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -243,7 +253,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
-
+#define CONFIG_CMD_SNTP
 
 #define	CONFIG_IBM_EMAC4_V4	1	/* 440SPe has this EMAC version	*/
 #define CONFIG_MII		1	/* MII PHY management		*/
@@ -427,14 +437,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/*Initial Memory map for Linux*/
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs		*/
-#define CFG_CACHELINE_SIZE	32	/* ...				*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
 
 /*
  * Internal Definitions
@@ -449,4 +451,8 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
new file mode 100644
index 000000000..f3e8601d8
--- /dev/null
+++ b/include/configs/kilauea.h
@@ -0,0 +1,523 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * kilauea.h - configuration for AMCC Kilauea (405EX)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KILAUEA		1		/* Board is Kilauea	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_405EX		1		/* Specifc 405EX support*/
+#define CONFIG_SYS_CLK_FREQ	33333333	/* ext frequency to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+#define CONFIG_BOARD_EMAC_COUNT
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFC000000
+#define CFG_NAND_ADDR		0xF8000000
+#define CFG_FPGA_BASE		0xF0000000
+#define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(TEXT_BASE)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0x02000000	/* inside of SDRAM	*/
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in init-ram */
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
+#define CFG_OCM_DATA_ADDR	CFG_INIT_RAM_ADDR /* for commproc.c	*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CFG_NAND_BOOT_SPL_DST	0x00800000	/* Copy SPL here		*/
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
+#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
+#define CFG_NAND_4_ADDR_CYCLE	1		/* Fourth addr used (>32MB)	*/
+
+#define CFG_NAND_ECCSIZE	256
+#define CFG_NAND_ECCBYTES	3
+#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM        (256)		/* 256MB			*/
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
+#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+
+/* Standard DTT sensor configuration */
+#define CONFIG_DTT_DS1775	1
+#define CONFIG_DTT_SENSORS	{ 0 }
+#define CFG_I2C_DTT_ADDR	0x48
+
+/* RTC configuration */
+#define CONFIG_RTC_DS1338	1
+#define CFG_I2C_RTC_ADDR	0x68
+
+/*-----------------------------------------------------------------------
+ * Ethernet
+ *----------------------------------------------------------------------*/
+#define CONFIG_M88E1111_PHY	1
+#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0		1
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	2
+
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"logversion=2\0"						\
+	"netdev=eth0\0"							\
+	"hostname=kilauea\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000\0"					\
+	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
+		"tftp ${fdt_addr} ${fdt_file};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000 - ${fdt_addr}\0"				\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=kilauea/uImage\0"					\
+	"fdt_file=kilauea/kilauea.dtb\0"				\
+	"fdt_addr=400000\0"						\
+	"kernel_addr=fc000000\0"					\
+	"ramdisk_addr=fc200000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 kilauea/u-boot.bin\0"				\
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffa0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load update\0"						\
+	"nload=tftp 200000 kilauea/u-boot-nand.bin\0"			\
+	"nupdate=nand erase 0 60000;nand write 200000 0 60000;"		\
+		"setenv filesize;saveenv\0"				\
+	"nupd=run nload nupdate\0"					\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP\0"						\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY	| \
+				 CFG_POST_CACHE		| \
+				 CFG_POST_CPU		| \
+				 CFG_POST_ETHER		| \
+				 CFG_POST_I2C		| \
+				 CFG_POST_MEMORY	| \
+				 CFG_POST_UART)
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/*-----------------------------------------------------------------------
+ * PCIe stuff
+ *----------------------------------------------------------------------*/
+#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CFG_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
+
+#define	CFG_PCIE0_CFGBASE	0xa0000000      /* remote access */
+#define	CFG_PCIE0_XCFGBASE	0xb0000000      /* local access */
+#define	CFG_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE1_CFGBASE	0xc0000000      /* remote access */
+#define	CFG_PCIE1_XCFGBASE	0xd0000000      /* local access */
+#define	CFG_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE0_UTLBASE	0xef502000
+#define	CFG_PCIE1_UTLBASE	0xef503000
+
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+/* booting from NAND, so NAND chips select has to be on CS 0 */
+#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+
+/* Memory Bank 1 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB1AP		0x05806500
+#define CFG_EBC_PB1CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
+
+/* Memory Bank 0 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1e000)
+#else
+#define CFG_NAND_CS		1		/* NAND chip connected to CSx	*/
+
+/* Memory Bank 0 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x05806500
+#define CFG_EBC_PB0CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
+
+/* Memory Bank 1 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB1AP		0x018003c0
+#define CFG_EBC_PB1CR		(CFG_NAND_ADDR | 0x1e000)
+#endif
+
+/* Memory Bank 2 (FPGA) initialization						*/
+#define CFG_EBC_PB2AP           0x9400C800
+#define CFG_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit	*/
+
+#define CFG_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
+
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *----------------------------------------------------------------------*/
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0	EBC_DATA_PAR(0)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO1	EBC_DATA_PAR(1)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO2	EBC_DATA_PAR(2)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO3	EBC_DATA_PAR(3)			*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO4	EBC_DATA(20)	USB2_DATA(4)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO5	EBC_DATA(21)	USB2_DATA(5)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO6	EBC_DATA(22)	USB2_DATA(6)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO7	EBC_DATA(23)	USB2_DATA(7)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	CS(1)/NFCE(1)	IRQ(7)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	CS(2)/NFCE(2)	IRQ(8)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3)	IRQ(9)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6)				*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16)	USB2_DATA(0)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17)	USB2_DATA(1)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18)	USB2_DATA(2)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19)	USB2_DATA(3)	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD	UART1_CTS	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR	UART1_RTS	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR	UART1_TX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI	UART1_RX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ	DMA_ACK2	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK	DMA_REQ2	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ	DMA_EOT2	IRQ(4) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK	DMA_ACK3	IRQ(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5)	DMA_EOT0	TS(3) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ	DMA_EOT3	IRQ(5) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO28				*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1	IRQ(2)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO30 DMA_REQ1	IRQ(1)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO31 DMA_ACK1	IRQ(0)		*/	\
+}												\
+}
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Some Kilauea stuff..., mainly fpga registers
+ */
+#define CFG_FPGA_REG_BASE		CFG_FPGA_BASE
+#define CFG_FPGA_FIFO_BASE		(in32(CFG_FPGA_BASE) | (1 << 11))
+
+/* interrupt */
+#define CFG_FPGA_SLIC0_R_DPRAM_INT	0x80000000
+#define CFG_FPGA_SLIC0_W_DPRAM_INT	0x40000000
+#define CFG_FPGA_SLIC1_R_DPRAM_INT	0x20000000
+#define CFG_FPGA_SLIC1_W_DPRAM_INT	0x10000000
+#define CFG_FPGA_PHY0_INT		0x08000000
+#define CFG_FPGA_PHY1_INT		0x04000000
+#define CFG_FPGA_SLIC0_INT		0x02000000
+#define CFG_FPGA_SLIC1_INT		0x01000000
+
+/* DPRAM setting */
+/* 00: 32B; 01: 64B; 10: 128B; 11: 256B  */
+#define CFG_FPGA_DPRAM_R_INT_LINE	0x00400000	/* 64 B */
+#define CFG_FPGA_DPRAM_W_INT_LINE	0x00100000	/* 64 B */
+#define CFG_FPGA_DPRAM_RW_TYPE		0x00080000
+#define CFG_FPGA_DPRAM_RST		0x00040000
+#define CFG_FPGA_UART0_FO		0x00020000
+#define CFG_FPGA_UART1_FO		0x00010000
+
+/* loopback */
+#define CFG_FPGA_CHIPSIDE_LOOPBACK	0x00004000
+#define CFG_FPGA_LINESIDE_LOOPBACK	0x00008000
+#define CFG_FPGA_SLIC0_ENABLE		0x00002000
+#define CFG_FPGA_SLIC1_ENABLE		0x00001000
+#define CFG_FPGA_SLIC0_CS		0x00000800
+#define CFG_FPGA_SLIC1_CS		0x00000400
+#define CFG_FPGA_USER_LED0		0x00000200
+#define CFG_FPGA_USER_LED1		0x00000100
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/korat.h b/include/configs/korat.h
new file mode 100644
index 000000000..1ea7d4894
--- /dev/null
+++ b/include/configs/korat.h
@@ -0,0 +1,376 @@
+/*
+ * (C) Copyright 2007
+ * Larry Johnson, lrj@acm.org
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * korat.h - configuration for Korat board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_440EPX		1	/* Specific PPC440EPx           */
+#define CONFIG_4xx		1	/* ... PPC4xx family            */
+#define CONFIG_SYS_CLK_FREQ	33333333
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f      */
+#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r             */
+
+/*-----------------------------------------------------------------------
+ * Manufacturer's information serial EEPROM parameters
+ *----------------------------------------------------------------------*/
+#define MAN_DATA_EEPROM_ADDR	0x53	/* EEPROM I2C address           */
+#define MAN_SERIAL_NO_FIELD	2
+#define MAN_SERIAL_NO_LENGTH	13
+#define MAN_MAC_ADDR_FIELD	3
+#define MAN_MAC_ADDR_LENGTH	17
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor   */
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()  */
+
+#define CFG_BOOT_BASE_ADDR	0xf0000000
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0          */
+#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH       */
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_OCM_BASE		0xe0010000	/* ocm                  */
+#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
+#define CFG_PCI_BASE		0xe0000000	/* Internal PCI regs    */
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory    */
+#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals */
+
+#define CFG_USB2D0_BASE		0xe0000100
+#define CFG_USB_DEVICE		0xe0000000
+#define CFG_USB_HOST		0xe0000400
+#define CFG_CPLD_BASE		0xc0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx has 16KB of internal SRAM, so no need for D-Cache		*/
+#undef CFG_INIT_RAM_DCACHE
+#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM                  */
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256	/* num bytes initial data       */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk   */
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI	1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environ vars   */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI			/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver        */
+
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip    */
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)      */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)      */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)     */
+#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection        */
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash        */
+
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector          */
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector     */
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM        (512)	/* 512 MiB      TODO: remove    */
+#define CONFIG_DDR_DATA_EYE		/* use DDR2 optimization        */
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup     */
+#define CONFIG_ZERO_SDRAM		/* Zero SDRAM after setup       */
+#define CONFIG_DDR_ECC			/* Use ECC when available       */
+#define SPD_EEPROM_ADDRESS	{0x50}
+#define CONFIG_PROG_SDRAM_TLB
+#define CFG_DRAM_TEST
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged               */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address  */
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T60	1
+#define CFG_I2C_RTC_ADDR	0x68
+
+/* I2C SYSMON (LM73)							*/
+#define CONFIG_DTT_LM73		1	/* National Semi's LM73 */
+#define CONFIG_DTT_SENSORS	{2}	/* Sensor addresses     */
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_MIN_TEMP	-30
+
+#define CONFIG_PREBOOT	"echo;"						\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME		korat
+#define CFG_BOOTFILE		"bootfile=/tftpboot/korat/uImage\0"
+#define CFG_ROOTPATH		"rootpath=/opt/eldk/ppc_4xxFP\0"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CFG_BOOTFILE							\
+	CFG_ROOTPATH							\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"kernel_addr=FC000000\0"					\
+	"ramdisk_addr=FC180000\0"					\
+	"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0"		\
+	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+		"cp.b 200000 FFFA0000 60000\0"			        \
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds     */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download  */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
+
+#define	CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management           */
+#define CONFIG_PHY_ADDR		2	/* PHY address, See schematics  */
+#define CONFIG_PHY_DYNAMIC_ANEG	1
+
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	3
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_CACHE    | \
+				 CFG_POST_CPU	   | \
+				 CFG_POST_ECC      | \
+				 CFG_POST_ETHER	   | \
+				 CFG_POST_FPU	   | \
+				 CFG_POST_I2C	   | \
+				 CFG_POST_MEMORY   | \
+				 CFG_POST_RTC      | \
+				 CFG_POST_SPR      | \
+				 CFG_POST_UART)
+
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0xC8000000	/* free virtual address      */
+
+#define CFG_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
+
+#define CONFIG_SUPPORT_VFAT
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory         */
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt       */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size      */
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size      */
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args   */
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on           */
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM        */
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address       */
+#define CFG_EXTBDINFO		1  /* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
+#define CONFIG_LOOPW            1	/* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1	/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI			/* include pci support          */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
+#define CFG_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP   */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
+#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC                         */
+#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever                     */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/* Memory Bank 0 (NOR-FLASH) initialization				*/
+#define CFG_EBC_PB0AP		0x04017300
+#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0x000DA000)
+
+/* Memory Bank 1 (NOR-FLASH) initialization				*/
+#define CFG_EBC_PB1AP		0x04017300
+#define CFG_EBC_PB1CR		(0xF8000000 | 0x000DA000)
+
+/* Memory Bank 2 (CPLD) initialization					*/
+#define CFG_EBC_PB2AP		0x04017300
+#define CFG_EBC_PB2CR		(CFG_CPLD_BASE | 0x00038000)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH     */
+#define BOOTFLAG_WARM	0x02	/* Software reboot                      */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use     */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index a09dd7473..cba7295fe 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -293,15 +293,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 00c34d5d7..5210024d8 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -153,7 +153,7 @@
 				 CFG_POST_SPR      | \
 				 CFG_POST_UART)
 
-#define CFG_POST_CACHE_ADDR	0x10000000	/* free virtual address		*/
+#define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 #define CONFIG_LOGBUFFER
 #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
@@ -414,7 +414,7 @@
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_440_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
@@ -432,7 +432,7 @@
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12				*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13				*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15				*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4)			*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5)			*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6)			*/	\
@@ -473,7 +473,7 @@
 {GPIO1_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
@@ -487,15 +487,6 @@
 }											\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	      /* ...			            */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
new file mode 100644
index 000000000..8f8e867b8
--- /dev/null
+++ b/include/configs/makalu.h
@@ -0,0 +1,397 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * makalu.h - configuration for AMCC Makalu (405EX)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_MAKALU		1		/* Board is Makalu	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_405EX		1		/* Specifc 405EX support*/
+#define CONFIG_SYS_CLK_FREQ	33330000	/* ext frequency to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFC000000
+#define CFG_FPGA_BASE		0xF0000000
+#define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(TEXT_BASE)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0x02000000	/* inside of SDRAM	*/
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in init-ram */
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
+#define CFG_OCM_DATA_ADDR	CFG_INIT_RAM_ADDR /* for commproc.c	*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK			/* no ext. clk		*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM	256
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
+#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+
+/* Standard DTT sensor configuration */
+#define CONFIG_DTT_DS1775	1
+#define CONFIG_DTT_SENSORS	{ 0 }
+#define CFG_I2C_DTT_ADDR	0x48
+
+/* RTC configuration */
+#define CONFIG_RTC_X1205	1
+#define CFG_I2C_RTC_ADDR	0x6f
+
+/*-----------------------------------------------------------------------
+ * Ethernet
+ *----------------------------------------------------------------------*/
+#define CONFIG_M88E1111_PHY	1
+#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		6	/* PHY address, See schematics	*/
+
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0		1
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	0
+
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"logversion=2\0"						\
+	"netdev=eth0\0"							\
+	"hostname=makalu\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0"	\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addtty addmisc;"			\
+		"bootm 200000\0"					\
+	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
+		"tftp ${fdt_addr} ${fdt_file};"				\
+		"run nfsargs addip addtty addmisc;"			\
+		"bootm 200000 - ${fdt_addr}\0"				\
+	"flash_nfs=run nfsargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=makalu/uImage\0"					\
+	"fdt_file=makalu/makalu.dtb\0"					\
+	"fdt_addr=400000\0"						\
+	"kernel_addr=fc000000\0"					\
+	"ramdisk_addr=fc200000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 makalu/u-boot.bin\0"				\
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffa0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load update\0"						\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP\0"						\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY	| \
+				 CFG_POST_CACHE		| \
+				 CFG_POST_CPU		| \
+				 CFG_POST_ETHER		| \
+				 CFG_POST_I2C		| \
+				 CFG_POST_MEMORY	| \
+				 CFG_POST_UART)
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/*-----------------------------------------------------------------------
+ * PCIe stuff
+ *----------------------------------------------------------------------*/
+#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CFG_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
+
+#define	CFG_PCIE0_CFGBASE	0xa0000000      /* remote access */
+#define	CFG_PCIE0_XCFGBASE	0xb0000000      /* local access */
+#define	CFG_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE1_CFGBASE	0xc0000000      /* remote access */
+#define	CFG_PCIE1_XCFGBASE	0xd0000000      /* local access */
+#define	CFG_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE0_UTLBASE	0xef502000
+#define	CFG_PCIE1_UTLBASE	0xef503000
+
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+/* Memory Bank 0 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x08033700
+#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+
+/* Memory Bank 2 (CPLD) initialization						*/
+#define CFG_EBC_PB2AP           0x9400C800
+#define CFG_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit	*/
+
+#define CFG_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
+
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *----------------------------------------------------------------------*/
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0	EBC_DATA_PAR(0)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO1	EBC_DATA_PAR(1)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO2	EBC_DATA_PAR(2)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO3	EBC_DATA_PAR(3)			*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO4	EBC_DATA(20)	USB2_DATA(4)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO5	EBC_DATA(21)	USB2_DATA(5)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO6	EBC_DATA(22)	USB2_DATA(6)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO7	EBC_DATA(23)	USB2_DATA(7)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	CS(1)/NFCE(1)	IRQ(7)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	CS(2)/NFCE(2)	IRQ(8)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3)	IRQ(9)		*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 IRQ(6)				*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16)	USB2_DATA(0)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17)	USB2_DATA(1)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18)	USB2_DATA(2)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19)	USB2_DATA(3)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD	UART1_CTS	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR	UART1_RTS	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO20 UART0_DTR	UART1_TX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO21 UART0_RI	UART1_RX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ	DMA_ACK2	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK	DMA_REQ2	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ	DMA_EOT2	IRQ(4) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK	DMA_ACK3	IRQ(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5)	DMA_EOT0	TS(3) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ	DMA_EOT3	IRQ(5) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO28				*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO29 DMA_EOT1	IRQ(2)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO30 DMA_REQ1	IRQ(1)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO31 DMA_ACK1	IRQ(0)		*/	\
+}												\
+}
+
+#define CFG_GPIO_PCIE_RST	23
+#define CFG_GPIO_PCIE_CLKREQ	27
+#define CFG_GPIO_PCIE_WAKE	28
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 018304184..194591830 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -160,12 +160,6 @@
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-
-/*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
new file mode 100644
index 000000000..ae0d01851
--- /dev/null
+++ b/include/configs/ms7722se.h
@@ -0,0 +1,136 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7722
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MS7722SE_H
+#define __MS7722SE_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4		1
+#define CONFIG_CPU_SH7722	1
+#define CONFIG_MS7722SE		1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_ENV
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS    	"console=ttySC0,115200 root=1f01"
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_IPADDR		192.168.0.22
+#define CONFIG_SERVERIP		192.168.0.1
+#define CONFIG_GATEWAYIP	192.168.0.1
+
+#define CONFIG_VERSION_VARIABLE
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+
+/* SMC9111 */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE    (0xB8000000)
+
+/* MEMORY */
+#define MS7722SE_SDRAM_BASE	(0x8C000000)
+#define MS7722SE_FLASH_BASE_1	(0xA0000000)
+#define MS7722SE_FLASH_BANK_SIZE	(8*1024 * 1024)
+
+#define CFG_LONGHELP				/* undef to save memory	*/
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CFG_CBSIZE		256		/* Buffer size for input from the Console */
+#define CFG_PBSIZE		256		/* Buffer size for Console output */
+#define CFG_MAXARGS		16		/* max args accepted for monitor commands */
+#define CFG_BARGSIZE		512		/* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
+
+/* SCIF */
+#define CFG_SCIF_CONSOLE	1
+#define CONFIG_CONS_SCIF0	1
+#undef  CFG_CONSOLE_INFO_QUIET			/* Suppress display of console information at boot */
+#undef  CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef  CFG_CONSOLE_ENV_OVERWRITE
+
+#define CFG_MEMTEST_START	(MS7722SE_SDRAM_BASE)
+#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+
+#undef  CFG_ALT_MEMTEST		/* Enable alternate, more extensive, memory test */
+#undef  CFG_MEMTEST_SCRATCH	/* Scratch address used by the alternate memory test */
+
+#undef  CFG_LOADS_BAUD_CHANGE	/* Enable temporary baudrate change while serial download */
+
+#define CFG_SDRAM_BASE	(MS7722SE_SDRAM_BASE)
+#define CFG_SDRAM_SIZE	(64 * 1024 * 1024)	/* maybe more, but if so u-boot doesn't know about it... */
+
+#define CFG_LOAD_ADDR	(CFG_SDRAM_BASE + 4 * 1024 * 1024)	/* default load address for scripts ?!? */
+
+#define CFG_MONITOR_BASE	(MS7722SE_FLASH_BASE_1)	/* Address of u-boot image
+						   	in Flash (NOT run time address in SDRAM) ?!? */
+#define CFG_MONITOR_LEN	(128 * 1024)		/* */
+#define CFG_MALLOC_LEN	(256 * 1024)		/* Size of DRAM reserved for malloc() use */
+#define CFG_GBL_DATA_SIZE	(256)		/* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ	(8 * 1024 * 1024)
+
+/* FLASH */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef  CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO			/* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_BASE		(MS7722SE_FLASH_BASE_1)	/* Physical start address of Flash memory */
+
+#define CFG_MAX_FLASH_SECT	150		/* Max number of sectors on each
+				   			Flash chip */
+
+/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
+#define CFG_MAX_FLASH_BANKS	2
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
+				  CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
+				}
+
+#define CFG_FLASH_ERASE_TOUT	(3 * 1000)	/* Timeout for Flash erase operations (in ms) */
+#define CFG_FLASH_WRITE_TOUT	(3 * 1000)	/* Timeout for Flash write operations (in ms) */
+#define CFG_FLASH_LOCK_TOUT	(3 * 1000)	/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)	/* Timeout for Flash clear lock bit operations (in ms) */
+
+#undef  CFG_FLASH_PROTECTION			/* Use hardware flash sectors protection instead of U-Boot software protection */
+
+#undef  CFG_DIRECT_FLASH_TFTP
+
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE	1
+#define CFG_ENV_SECT_SIZE	(8 * 1024)
+#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
+#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE) 	/* Offset of env Flash sector relative to CFG_FLASH_BASE */
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	33333333
+#define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif	/* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
new file mode 100644
index 000000000..36681568f
--- /dev/null
+++ b/include/configs/ms7750se.h
@@ -0,0 +1,108 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7750
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MS7750SE_H
+#define __MS7750SE_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4		1
+#define CONFIG_CPU_SH7750	1
+/* #define CONFIG_CPU_SH7751	1 */
+/* #define CONFIG_CPU_TYPE_R	1 */
+#define CONFIG_MS7750SE		1
+#define __LITTLE_ENDIAN__	1
+
+/*
+ * Command line configuration.
+ */
+/*#include <config_cmd_default.h>*/
+
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+
+#define CFG_SCIF_CONSOLE	1
+#define CONFIG_BAUDRATE		38400
+#define CONFIG_CONS_SCIF1	1
+#define BOARD_LATE_INIT		1
+
+#define CONFIG_BOOTDELAY	-1
+#define CONFIG_BOOTARGS    	"console=ttySC0,38400"
+#define CONFIG_ENV_OVERWRITE	1
+
+/* SDRAM */
+#define CFG_SDRAM_BASE		(0x8C000000)
+#define CFG_SDRAM_SIZE		(64 * 1024 * 1024)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT		"=> "
+#define CFG_CBSIZE		256
+#define CFG_PBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_BARGSIZE		512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+
+/* NOR Flash */
+/* #define CFG_FLASH_BASE		(0xA1000000)*/
+#define CFG_FLASH_BASE		(0xA0000000)
+#define CFG_MAX_FLASH_BANKS	(1)	/* Max number of
+				 	 * Flash memory banks
+				 	 */
+#define CFG_MAX_FLASH_SECT	142
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
+#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)	/* Address of u-boot image in Flash */
+#define CFG_MONITOR_LEN		(128 * 1024)
+#define CFG_MALLOC_LEN		(256 * 1024)		/* Size of DRAM reserved for malloc() use */
+
+#define CFG_GBL_DATA_SIZE	(256)			/* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CFG_RX_ETH_BUFFER	(8)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_CFI_BROKEN_TABLE
+#undef  CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO				/* print 'E' for empty sector on flinfo */
+
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT  	120000
+#define CFG_FLASH_WRITE_TOUT	500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	33333333
+#define TMU_CLK_DIVIDER		4
+#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __MS7750SE_H */
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index bc2fd33ff..fd4d3affe 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -317,14 +317,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 51f19a145..255e0727c 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -311,14 +311,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10)	/* For AMCC 405 CPUs		*/
-#define CFG_CACHELINE_SIZE	32	/* ...					*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 7653ba1d2..d66f4bd44 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -365,7 +365,7 @@
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_440_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
+#define CFG_4xx_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG},  /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/ \
@@ -438,15 +438,6 @@
 }											\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 814082ccc..40a05fa5e 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -92,8 +92,8 @@
 
 /* enable I2C */
 #define CONFIG_HARD_I2C        	1	/* I2C with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_SPEED		50000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x30
 
 
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index b4a063a1d..9b05bd6c8 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -103,7 +103,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
 
 
 #define CONFIG_BOOTDELAY	3
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index dc906b150..60d401fa0 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -234,16 +234,6 @@
 #define CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...					*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 #define FLASH0_BA	CFG_FLASH_BASE		/* FLASH 0 Base Address		*/
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index cb2253698..0a03c0ece 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -433,24 +433,6 @@ extern unsigned long offsetOfEnvironment;
 #define CONFIG_JFFS2_PART_SIZE		0x01000000
 #define CONFIG_JFFS2_PART_OFFSET	0x00000000
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *
- * CFG_DCACHE_SIZE -> size of data cache:
- * - 405GP 8k
- * - 405GPr 16k
- * How to handle the difference in chache size?
- * CFG_CACHELINE_SIZE -> size of one cache line: 32 bytes
- * (used in cpu/ppc4xx/start.S)
-*/
-#define CFG_DCACHE_SIZE    16384
-
-#define CFG_CACHELINE_SIZE 32
-
-#if defined(CONFIG_CMD_KGDB)
- #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 600f98cf0..1f72b5488 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -43,6 +43,14 @@
 #define CONFIG_SYS_CLK_FREQ    ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
 				33333333 : 33000000)
 
+#if 0
+/*
+ * 44x dcache supported is working now on sequoia, but we don't enable
+ * it yet since it needs further testing
+ */
+#define CONFIG_4xx_DCACHE			/* enable dcache	*/
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
 
@@ -293,8 +301,15 @@
 
 /* USB */
 #ifdef CONFIG_440EPX
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
+#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
 
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
@@ -314,6 +329,7 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
 
 
 /*
@@ -361,7 +377,7 @@
 
 #define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x10000000 /* free virtual address	*/
+#define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 
 #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
@@ -460,15 +476,6 @@
 #define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
 #define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	      /* ...			            */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
@@ -481,4 +488,9 @@
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index ca404ff45..18a036c2b 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -88,7 +88,6 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_ELF
 
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
index d623e5600..d012c60aa 100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@ -80,6 +80,7 @@
 	"bootfile=/tftpboot/taihu/uImage\0"				\
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"netdev=eth0\0"							\
+	"hostname=taihu\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -210,10 +211,12 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 /*-----------------------------------------------------------------------
  * I2C stuff
@@ -244,6 +247,7 @@ unsigned char spi_read(void);
 /* standard dtt sensor configuration */
 #define CONFIG_DTT_DS1775	1
 #define CONFIG_DTT_SENSORS	{ 0 }
+#define CFG_I2C_DTT_ADDR	0x49
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -327,7 +331,7 @@ unsigned char spi_read(void);
 /*-----------------------------------------------------------------------
  * PPC405 GPIO Configuration
  */
-#define CFG_440_GPIO_TABLE { /*				GPIO	Alternate1		*/	\
+#define CFG_4xx_GPIO_TABLE { /*				GPIO	Alternate1		*/	\
 {												\
 /* GPIO Core 0 */										\
 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO0	PerBLast    SPI CS	*/	\
@@ -365,13 +369,6 @@ unsigned char spi_read(void);
 }												\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405EP CPU */
-#define CFG_CACHELINE_SIZE	32
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-
 /*
  * Init Memory Controller:
  *
@@ -421,43 +418,6 @@ unsigned char spi_read(void);
 #define CFG_EBC_PB4AP           0x158FF600
 #define CFG_EBC_PB4CR           0x5021A000
 
-/*-----------------------------------------------------------------------
- * Definitions for GPIO setup (PPC405EP specific)
- *
- * GPIO0[0]     - External Bus Controller BLAST output
- * GPIO0[1-9]   - Instruction trace outputs
- * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
- * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
- * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
- * GPIO0[24-27] - UART0 control signal inputs/outputs
- * GPIO0[28-29] - UART1 data signal input/output
- * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
- */
-#define CFG_GPIO0_OSRH	0x15555550	/* output select high/low */
-#define CFG_GPIO0_OSRL	0x00000110
-#define CFG_GPIO0_ISR1H	0x00000001	/* input select high/low */
-#define CFG_GPIO0_ISR1L	0x15545440
-#define CFG_GPIO0_TSRH	0x00000000	/* three-state select high/low */
-#define CFG_GPIO0_TSRL	0x00000000
-#define CFG_GPIO0_TCR	0xFFFE8117	/* three-state control */
-#define CFG_GPIO0_ODR	0x00000000	/* open drain */
-
-#define GPIO0		0		/* GPIO controller 0 */
-
-/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */
-
-#define GPIOx_OSL	(GPIO0_OSRH-GPIO_BASE)
-#define GPIOx_TSL	(GPIO0_TSRH-GPIO_BASE)
-#define GPIOx_IS1L	(GPIO0_ISR1H-GPIO_BASE)
-#define GPIOx_IS2L	(GPIO0_ISR1H-GPIO_BASE)
-#define GPIOx_IS3L	(GPIO0_ISR1H-GPIO_BASE)
-
-#define GPIO_OS(x)	(x+GPIOx_OSL)	/* GPIO output select */
-#define GPIO_TS(x)	(x+GPIOx_TSL)	/* GPIO three-state select */
-#define GPIO_IS1(x)	(x+GPIOx_IS1L)	/* GPIO input select */
-#define GPIO_IS2(x)	(x+GPIOx_IS1L)
-#define GPIO_IS3(x)	(x+GPIOx_IS1L)
-
 #define CPLD_REG0_ADDR	0x50100000
 #define CPLD_REG1_ADDR	0x50100001
 /*
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index baa4fbd31..ab3b0c1ac 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -319,15 +319,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index edae6f4b9..827a28f07 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -193,11 +193,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index 180549efa..19b29e71d 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -290,16 +290,6 @@
 #endif
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 35bce4af9..a8eeff989 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -160,6 +160,14 @@
 #define CFG_ENV_OFFSET		0x0
 #endif /* CFG_ENV_IS_IN_EEPROM */
 
+/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
+#define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
+#define CONFIG_DTT_AD7414	1		/* use AD7414		*/
+#define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_LOW_TEMP	-30
+#define CFG_DTT_HYSTERESIS	3
+
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
@@ -273,6 +281,7 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
@@ -361,15 +370,6 @@
 
 #define CFG_BCSR5_PCI66EN	0x80
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 74033b4ae..db1d35bdd 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -64,7 +64,7 @@
 #define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
 
 #define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x01000000
+#define CFG_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
@@ -74,6 +74,9 @@
 #define CFG_PCIE1_XCFGBASE	0xc3001000
 #define CFG_PCIE2_XCFGBASE	0xc3002000
 
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000400000000ULL
+
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
@@ -183,6 +186,7 @@
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	"pciconfighost=1\0"						\
+	"pcie_mode=RP:EP:EP\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -320,14 +324,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/*Initial Memory map for Linux*/
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs		*/
-#define CFG_CACHELINE_SIZE	32	/* ...				*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 605755a87..810a528d2 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -237,13 +237,6 @@
 #endif
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405EP CPU			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-
-/*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */
diff --git a/include/dtt.h b/include/dtt.h
index 2e8c69015..4e8aaad87 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -31,7 +31,8 @@
     defined(CONFIG_DTT_DS1621) || \
     defined(CONFIG_DTT_DS1775) || \
     defined(CONFIG_DTT_LM81) || \
-    defined(CONFIG_DTT_ADM1021)
+    defined(CONFIG_DTT_ADM1021) || \
+    defined(CONFIG_DTT_LM73)
 
 #define CONFIG_DTT				/* We have a DTT */
 
@@ -119,4 +120,13 @@ extern int dtt_get_temp(int sensor);
 #define DTT_ADM1021_DEVID	0x41
 #endif
 
+#if defined(CONFIG_DTT_LM73)
+#define DTT_READ_TEMP		0x0
+#define DTT_CONFIG		0x1
+#define DTT_TEMP_HIGH		0x2
+#define DTT_TEMP_LOW		0x3
+#define DTT_CONTROL		0x4
+#define DTT_ID			0x7
+#endif
+
 #endif /* _DTT_H_ */
diff --git a/include/e500.h b/include/e500.h
index 8e3bf8cb7..0d73260f4 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -12,6 +12,7 @@ typedef struct
 {
   unsigned long freqProcessor;
   unsigned long freqSystemBus;
+  unsigned long freqDDRBus;
 } MPC85xx_SYS_INFO;
 
 #endif  /* _ASMLANGUAGE */
diff --git a/include/fdt.h b/include/fdt.h
index 3dd3aca3b..48ccfd910 100644
--- a/include/fdt.h
+++ b/include/fdt.h
@@ -1,22 +1,3 @@
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
 #ifndef _FDT_H
 #define _FDT_H
 
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 60fa423b3..3d6c1a841 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -29,6 +29,23 @@
 #include <fdt.h>
 
 int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force);
+void do_fixup_by_path(void *fdt, const char *path, const char *prop,
+		      const void *val, int len, int create);
+void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
+			  u32 val, int create);
+void do_fixup_by_prop(void *fdt,
+		      const char *pname, const void *pval, int plen,
+		      const char *prop, const void *val, int len,
+		      int create);
+void do_fixup_by_prop_u32(void *fdt,
+			  const char *pname, const void *pval, int plen,
+			  const char *prop, u32 val, int create);
+void do_fixup_by_compat(void *fdt, const char *compat,
+			const char *prop, const void *val, int len, int create);
+void do_fixup_by_compat_u32(void *fdt, const char *compat,
+			    const char *prop, u32 val, int create);
+int fdt_fixup_memory(void *blob, u64 start, u64 size);
+void fdt_fixup_ethernet(void *fdt, bd_t *bd);
 
 #ifdef CONFIG_OF_HAS_UBOOT_ENV
 int fdt_env(void *fdt);
diff --git a/include/flash.h b/include/flash.h
index b0bf733f1..2ed1e20fd 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -52,6 +52,9 @@ typedef struct {
 	ushort	ext_addr;		/* extended query table address		*/
 	ushort	cfi_version;		/* cfi version				*/
 	ushort	cfi_offset;		/* offset for cfi query 		*/
+	ulong   addr_unlock1;		/* unlock address 1 for AMD flash roms  */
+	ulong   addr_unlock2;		/* unlock address 2 for AMD flash roms  */
+	const char *name;		/* human-readable name 	                */
 #endif
 } flash_info_t;
 
@@ -77,6 +80,7 @@ typedef struct {
 #define FLASH_CFI_X8		0x00
 #define FLASH_CFI_X16		0x01
 #define FLASH_CFI_X8X16		0x02
+#define FLASH_CFI_X16X32	0x05
 
 /* convert between bit value and numeric value */
 #define CFI_FLASH_SHIFT_WIDTH	3
@@ -101,6 +105,13 @@ extern void flash_read_user_serial(flash_info_t * info, void * buffer, int offse
 extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len);
 #endif	/* CFG_FLASH_PROTECTION */
 
+#ifdef CONFIG_FLASH_CFI_LEGACY
+extern ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info);
+extern int jedec_flash_match(flash_info_t *info, ulong base);
+#define CFI_CMDSET_AMD_LEGACY		0xFFF0
+#endif
+
+
 /*-----------------------------------------------------------------------
  * return codes from flash_write():
  */
diff --git a/include/ioports.h b/include/ioports.h
index cfba667ca..1134ea520 100644
--- a/include/ioports.h
+++ b/include/ioports.h
@@ -26,7 +26,7 @@ typedef struct {
  * a 0x20 byte boundary
  */
 #ifdef CONFIG_MPC85xx
-#define ioport_addr(im, idx) (ioport_t *)((uint)&((im)->im_cpm.im_cpm_iop) + ((idx)*0x20))
+#define ioport_addr(im, idx) (ioport_t *)((uint)&(im->im_cpm_iop) + ((idx)*0x20))
 #else
 #define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20))
 #endif
diff --git a/include/libfdt.h b/include/libfdt.h
index 38c65a989..805004900 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -1,154 +1,721 @@
+#ifndef _LIBFDT_H
+#define _LIBFDT_H
 /*
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
  *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
  *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#ifndef _LIBFDT_H
-#define _LIBFDT_H
-
-#include <fdt.h>
 #include <libfdt_env.h>
+#include <fdt.h>
 
 #define FDT_FIRST_SUPPORTED_VERSION	0x10
 #define FDT_LAST_SUPPORTED_VERSION	0x11
 
 /* Error codes: informative error codes */
 #define FDT_ERR_NOTFOUND	1
+	/* FDT_ERR_NOTFOUND: The requested node or property does not exist */
 #define FDT_ERR_EXISTS		2
+	/* FDT_ERR_EXISTS: Attemped to create a node or property which
+	 * already exists */
 #define FDT_ERR_NOSPACE		3
+	/* FDT_ERR_NOSPACE: Operation needed to expand the device
+	 * tree, but its buffer did not have sufficient space to
+	 * contain the expanded tree. Use fdt_open_into() to move the
+	 * device tree to a buffer with more space. */
 
 /* Error codes: codes for bad parameters */
 #define FDT_ERR_BADOFFSET	4
+	/* FDT_ERR_BADOFFSET: Function was passed a structure block
+	 * offset which is out-of-bounds, or which points to an
+	 * unsuitable part of the structure for the operation. */
 #define FDT_ERR_BADPATH		5
-#define FDT_ERR_BADSTATE	6
+	/* FDT_ERR_BADPATH: Function was passed a badly formatted path
+	 * (e.g. missing a leading / for a function which requires an
+	 * absolute path) */
+#define FDT_ERR_BADPHANDLE	6
+	/* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle
+	 * value.  phandle values of 0 and -1 are not permitted. */
+#define FDT_ERR_BADSTATE	7
+	/* FDT_ERR_BADSTATE: Function was passed an incomplete device
+	 * tree created by the sequential-write functions, which is
+	 * not sufficiently complete for the requested operation. */
 
 /* Error codes: codes for bad device tree blobs */
-#define FDT_ERR_TRUNCATED	7
-#define FDT_ERR_BADMAGIC	8
-#define FDT_ERR_BADVERSION	9
-#define FDT_ERR_BADSTRUCTURE	10
-#define FDT_ERR_BADLAYOUT	11
+#define FDT_ERR_TRUNCATED	8
+	/* FDT_ERR_TRUNCATED: Structure block of the given device tree
+	 * ends without an FDT_END tag. */
+#define FDT_ERR_BADMAGIC	9
+	/* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
+	 * device tree at all - it is missing the flattened device
+	 * tree magic number. */
+#define FDT_ERR_BADVERSION	10
+	/* FDT_ERR_BADVERSION: Given device tree has a version which
+	 * can't be handled by the requested operation.  For
+	 * read-write functions, this may mean that fdt_open_into() is
+	 * required to convert the tree to the expected version. */
+#define FDT_ERR_BADSTRUCTURE	11
+	/* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
+	 * structure block or other serious error (e.g. misnested
+	 * nodes, or subnodes preceding properties). */
+#define FDT_ERR_BADLAYOUT	12
+	/* FDT_ERR_BADLAYOUT: For read-write functions, the given
+	 * device tree has it's sub-blocks in an order that the
+	 * function can't handle (memory reserve map, then structure,
+	 * then strings).  Use fdt_open_into() to reorganize the tree
+	 * into a form suitable for the read-write operations. */
+
+/* "Can't happen" error indicating a bug in libfdt */
+#define FDT_ERR_INTERNAL	13
+	/* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
+	 * Should never be returned, if it is, it indicates a bug in
+	 * libfdt itself. */
 
-#define FDT_ERR_MAX		11
+#define FDT_ERR_MAX		13
+
+/**********************************************************************/
+/* Low-level functions (you probably don't need these)                */
+/**********************************************************************/
+
+const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
+{
+	return (void *)fdt_offset_ptr(fdt, offset, checklen);
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
+
+/**********************************************************************/
+/* General functions                                                  */
+/**********************************************************************/
 
 #define fdt_get_header(fdt, field) \
-	(fdt32_to_cpu(((struct fdt_header *)(fdt))->field))
-#define fdt_magic(fdt)			(fdt_get_header(fdt, magic))
+	(fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
+#define fdt_magic(fdt) 			(fdt_get_header(fdt, magic))
 #define fdt_totalsize(fdt)		(fdt_get_header(fdt, totalsize))
 #define fdt_off_dt_struct(fdt)		(fdt_get_header(fdt, off_dt_struct))
 #define fdt_off_dt_strings(fdt)		(fdt_get_header(fdt, off_dt_strings))
 #define fdt_off_mem_rsvmap(fdt)		(fdt_get_header(fdt, off_mem_rsvmap))
 #define fdt_version(fdt)		(fdt_get_header(fdt, version))
-#define fdt_last_comp_version(fdt)	(fdt_get_header(fdt, last_comp_version))
-#define fdt_boot_cpuid_phys(fdt)	(fdt_get_header(fdt, boot_cpuid_phys))
-#define fdt_size_dt_strings(fdt)	(fdt_get_header(fdt, size_dt_strings))
+#define fdt_last_comp_version(fdt) 	(fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt) 	(fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt) 	(fdt_get_header(fdt, size_dt_strings))
 #define fdt_size_dt_struct(fdt)		(fdt_get_header(fdt, size_dt_struct))
 
-#define fdt_set_header(fdt, field, val) \
-	((struct fdt_header *)(fdt))->field = cpu_to_fdt32(val)
+#define __fdt_set_hdr(name) \
+	static inline void fdt_set_##name(void *fdt, uint32_t val) \
+	{ \
+		struct fdt_header *fdth = fdt; \
+		fdth->name = cpu_to_fdt32(val); \
+	}
+__fdt_set_hdr(magic);
+__fdt_set_hdr(totalsize);
+__fdt_set_hdr(off_dt_struct);
+__fdt_set_hdr(off_dt_strings);
+__fdt_set_hdr(off_mem_rsvmap);
+__fdt_set_hdr(version);
+__fdt_set_hdr(last_comp_version);
+__fdt_set_hdr(boot_cpuid_phys);
+__fdt_set_hdr(size_dt_strings);
+__fdt_set_hdr(size_dt_struct);
+#undef __fdt_set_hdr
 
+/**
+ * fdt_check_header - sanity check a device tree or possible device tree
+ * @fdt: pointer to data which might be a flattened device tree
+ *
+ * fdt_check_header() checks that the given buffer contains what
+ * appears to be a flattened device tree with sane information in its
+ * header.
+ *
+ * returns:
+ *     0, if the buffer appears to contain a valid device tree
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings, as above
+ */
 int fdt_check_header(const void *fdt);
 
-void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+/**
+ * fdt_move - move a device tree around in memory
+ * @fdt: pointer to the device tree to move
+ * @buf: pointer to memory where the device is to be moved
+ * @bufsize: size of the memory space at buf
+ *
+ * fdt_move() relocates, if possible, the device tree blob located at
+ * fdt to the buffer at buf of size bufsize.  The buffer may overlap
+ * with the existing device tree blob at fdt.  Therefore,
+ *     fdt_move(fdt, fdt, fdt_totalsize(fdt))
+ * should always succeed.
+ *
+ * returns:
+ *     0, on success
+ *     -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_move(const void *fdt, void *buf, int bufsize);
 
-#define fdt_offset_ptr_typed(fdt, offset, var) \
-	((typeof(var))(fdt_offset_ptr((fdt), (offset), sizeof(*(var)))))
+/**********************************************************************/
+/* Read-only functions                                                */
+/**********************************************************************/
 
-int fdt_move(const void *fdt, void *buf, int bufsize);
+/**
+ * fdt_string - retreive a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ *
+ * fdt_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt.
+ *
+ * returns:
+ *     a pointer to the string, on success
+ *     NULL, if stroffset is out of bounds
+ */
+const char *fdt_string(const void *fdt, int stroffset);
 
-/* Read-only functions */
-char *fdt_string(const void *fdt, int stroffset);
+/**
+ * fdt_num_mem_rsv - retreive the number of memory reserve map entries
+ * @fdt: pointer to the device tree blob
+ *
+ * Returns the number of entries in the device tree blob's memory
+ * reservation map.  This does not include the terminating 0,0 entry
+ * or any other (0,0) entries reserved for expansion.
+ *
+ * returns:
+ *     the number of entries
+ */
+int fdt_num_mem_rsv(const void *fdt);
 
+/**
+ * fdt_get_mem_rsv - retreive one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: pointers to 64-bit variables
+ *
+ * On success, *address and *size will contain the address and size of
+ * the n-th reserve map entry from the device tree blob, in
+ * native-endian format.
+ *
+ * returns:
+ *     0, on success
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
+
+/**
+ * fdt_subnode_offset_namelen - find a subnode based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_subnode_offset(), but only examine the first
+ * namelen characters of name for matching the subnode name.  This is
+ * useful for finding subnodes based on a portion of a larger string,
+ * such as a full path.
+ */
 int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
 			       const char *name, int namelen);
+/**
+ * fdt_subnode_offset - find a subnode of a given node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_subnode_offset() finds a subnode of the node at structure block
+ * offset parentoffset with the given name.  name may include a unit
+ * address, in which case fdt_subnode_offset() will find the subnode
+ * with that unit address, or the unit address may be omitted, in
+ * which case fdt_subnode_offset() will find an arbitrary subnode
+ * whose name excluding unit address matches the given name.
+ *
+ * returns:
+ *	structure block offset of the requested subnode (>=0), on success
+ *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
 int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
 
-int fdt_find_node_by_path(const void *fdt, const char *path);
-int fdt_find_node_by_type(const void *fdt, int nodeoffset, const char *type);
+/**
+ * fdt_path_offset - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ *
+ * fdt_path_offset() finds a node of a given path in the device tree.
+ * Each path component may omit the unit address portion, but the
+ * results of this are undefined if any such path component is
+ * ambiguous (that is if there are multiple nodes at the relevant
+ * level matching the given component, differentiated only by unit
+ * address).
+ *
+ * returns:
+ *	structure block offset of the node with the requested path (>=0), on success
+ *	-FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
+ *	-FDT_ERR_NOTFOUND, if the requested node does not exist
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_path_offset(const void *fdt, const char *path);
 
-int fdt_node_is_compatible(const void *fdt, int nodeoffset,
-			   const char *compat);
-int fdt_find_compatible_node(const void *fdt, int nodeoffset,
-			     const char *type, const char *compat);
+/**
+ * fdt_get_name - retreive the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the starting node
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_name() retrieves the name (including unit address) of the
+ * device tree node at structure block offset nodeoffset.  If lenp is
+ * non-NULL, the length of this name is also returned, in the integer
+ * pointed to by lenp.
+ *
+ * returns:
+ *	pointer to the node's name, on success
+ *		If lenp is non-NULL, *lenp contains the length of that name (>=0)
+ *	NULL, on error
+ *		if lenp is non-NULL *lenp contains an error code (<0):
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE, standard meanings
+ */
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
 
-struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
-				      const char *name, int *lenp);
-void *fdt_getprop(const void *fdt, int nodeoffset,
-		  const char *name, int *lenp);
+/**
+ * fdt_get_property - find a given property in a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property() retrieves a pointer to the fdt_property
+ * structure within the device tree blob corresponding to the property
+ * named 'name' of the node at offset nodeoffset.  If lenp is
+ * non-NULL, the length of the property value also returned, in the
+ * integer pointed to by lenp.
+ *
+ * returns:
+ *	pointer to the structure representing the property
+ *		if lenp is non-NULL, *lenp contains the length of the property
+ *		value (>=0)
+ *	NULL, on error
+ *		if lenp is non-NULL, *lenp contains an error code (<0):
+ *		-FDT_ERR_NOTFOUND, node does not have named property
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE,
+ *		-FDT_ERR_BADSTRUCTURE,
+ *		-FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
+					    const char *name, int *lenp);
+static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
+						      const char *name,
+						      int *lenp)
+{
+	return (struct fdt_property *)fdt_get_property(fdt, nodeoffset,
+						       name, lenp);
+}
 
-uint32_t fdt_next_tag(const void *fdt, int offset,
-		      int *nextoffset, char **namep);
-int fdt_num_reservemap(void *fdt, int *used, int *total);
-int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re);
+/**
+ * fdt_getprop - retrieve the value of a given property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop() retrieves a pointer to the value of the property
+ * named 'name' of the node at offset nodeoffset (this will be a
+ * pointer to within the device blob itself, not a copy of the value).
+ * If lenp is non-NULL, the length of the property value also
+ * returned, in the integer pointed to by lenp.
+ *
+ * returns:
+ *	pointer to the property's value
+ *		if lenp is non-NULL, *lenp contains the length of the property
+ *		value (>=0)
+ *	NULL, on error
+ *		if lenp is non-NULL, *lenp contains an error code (<0):
+ *		-FDT_ERR_NOTFOUND, node does not have named property
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE,
+ *		-FDT_ERR_BADSTRUCTURE,
+ *		-FDT_ERR_TRUNCATED, standard meanings
+ */
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+			const char *name, int *lenp);
+static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
+				  const char *name, int *lenp)
+{
+	return (void *)fdt_getprop(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_get_phandle - retreive the phandle of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the node
+ *
+ * fdt_get_phandle() retrieves the phandle of the device tree node at
+ * structure block offset nodeoffset.
+ *
+ * returns:
+ *	the phandle of the node at nodeoffset, on succes (!= 0, != -1)
+ *	0, if the node has no phandle, or another error occurs
+ */
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_get_path - determine the full path of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose path to find
+ * @buf: character buffer to contain the returned path (will be overwritten)
+ * @buflen: size of the character buffer at buf
+ *
+ * fdt_get_path() computes the full path of the node at offset
+ * nodeoffset, and records that path in the buffer at buf.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ *	0, on success
+ *		buf contains the absolute path of the node at
+ *		nodeoffset, as a NUL-terminated string.
+ * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
+ *		characters and will not fit in the given buffer.
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
+
+/**
+ * fdt_supernode_atdepth_offset - find a specific ancestor of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ * @supernodedepth: depth of the ancestor to find
+ * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_supernode_atdepth_offset() finds an ancestor of the given node
+ * at a specific depth from the root (where the root itself has depth
+ * 0, its immediate subnodes depth 1 and so forth).  So
+ *	fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
+ * will always return 0, the offset of the root node.  If the node at
+ * nodeoffset has depth D, then:
+ *	fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
+ * will return nodeoffset itself.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+
+ *	structure block offset of the node at node offset's ancestor
+ *		of depth supernodedepth (>=0), on success
+ * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+*	-FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+				 int supernodedepth, int *nodedepth);
+
+/**
+ * fdt_node_depth - find the depth of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_node_depth() finds the depth of a given node.  The root node
+ * has depth 0, its immediate subnodes depth 1 and so forth.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ *	depth of the node at nodeoffset (>=0), on success
+ * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_depth(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_parent_offset - find the parent of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_parent_offset() locates the parent node of a given node (that
+ * is, it finds the offset of the node which contains the node at
+ * nodeoffset as a subnode).
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset, *twice*.
+ *
+ * returns:
+ *	stucture block offset of the parent of the node at nodeoffset
+ *		(>=0), on success
+ * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_parent_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_node_offset_by_prop_value - find nodes with a given property value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @propname: property name to check
+ * @propval: property value to search for
+ * @proplen: length of the value in propval
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the first
+ * node after startoffset, which has a property named propname whose
+ * value is of length proplen and has value equal to propval; or if
+ * startoffset is -1, the very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ *	offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
+ *					       propval, proplen);
+ *	while (offset != -FDT_ERR_NOTFOUND) {
+ *		... other code here ...
+ *		offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
+ *						       propval, proplen);
+ *	}
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ *	structure block offset of the located node (>= 0, >startoffset),
+ *		 on success
+ *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ *		tree after startoffset
+ * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+				  const char *propname,
+				  const void *propval, int proplen);
+
+/**
+ * fdt_node_offset_by_phandle - find the node with a given phandle
+ * @fdt: pointer to the device tree blob
+ * @phandle: phandle value
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the node
+ * which has the given phandle value.  If there is more than one node
+ * in the tree with the given phandle (an invalid tree), results are
+ * undefined.
+ *
+ * returns:
+ *	structure block offset of the located node (>= 0), on success
+ *	-FDT_ERR_NOTFOUND, no node with that phandle exists
+ *	-FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
+
+/**
+ * fdt_node_check_compatible: check a node's compatible property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @compatible: string to match against
+ *
+ *
+ * fdt_node_check_compatible() returns 0 if the given node contains a
+ * 'compatible' property with the given string as one of its elements,
+ * it returns non-zero otherwise, or on error.
+ *
+ * returns:
+ *	0, if the node has a 'compatible' property listing the given string
+ *	1, if the node has a 'compatible' property, but it does not list
+ *		the given string
+ *	-FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
+ * 	-FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+			      const char *compatible);
+
+/**
+ * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @compatible: 'compatible' string to match against
+ *
+ * fdt_node_offset_by_compatible() returns the offset of the first
+ * node after startoffset, which has a 'compatible' property which
+ * lists the given compatible string; or if startoffset is -1, the
+ * very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ *	offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
+ *	while (offset != -FDT_ERR_NOTFOUND) {
+ *		... other code here ...
+ *		offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
+ *	}
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ *	structure block offset of the located node (>= 0, >startoffset),
+ *		 on success
+ *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ *		tree after startoffset
+ * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+				  const char *compatible);
+
+/**********************************************************************/
+/* Write-in-place functions                                           */
+/**********************************************************************/
 
-/* Write-in-place functions */
 int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
 			const void *val, int len);
-
-#define fdt_setprop_inplace_typed(fdt, nodeoffset, name, val) \
-	({ \
-		typeof(val) x = val; \
-		fdt_setprop_inplace(fdt, nodeoffset, name, &x, sizeof(x)); \
-	})
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+					   const char *name, uint32_t val)
+{
+	val = cpu_to_fdt32(val);
+	return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
+}
 
 int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
 int fdt_nop_node(void *fdt, int nodeoffset);
-int fdt_insert_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size);
 
+/**********************************************************************/
+/* Sequential write functions                                         */
+/**********************************************************************/
 
-/* Sequential-write functions */
 int fdt_create(void *buf, int bufsize);
 int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
 int fdt_finish_reservemap(void *fdt);
 int fdt_begin_node(void *fdt, const char *name);
 int fdt_property(void *fdt, const char *name, const void *val, int len);
-#define fdt_property_typed(fdt, name, val) \
-	({ \
-		typeof(val) x = (val); \
-		fdt_property((fdt), (name), &x, sizeof(x)); \
-	})
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+	val = cpu_to_fdt32(val);
+	return fdt_property(fdt, name, &val, sizeof(val));
+}
 #define fdt_property_string(fdt, name, str) \
 	fdt_property(fdt, name, str, strlen(str)+1)
 int fdt_end_node(void *fdt);
 int fdt_finish(void *fdt);
-int fdt_replace_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size);
 
-/* Read-write functions */
-int fdt_open_into(void *fdt, void *buf, int bufsize);
+/**********************************************************************/
+/* Read-write functions                                               */
+/**********************************************************************/
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize);
 int fdt_pack(void *fdt);
 
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+int fdt_del_mem_rsv(void *fdt, int n);
+
 int fdt_setprop(void *fdt, int nodeoffset, const char *name,
 		const void *val, int len);
-#define fdt_setprop_typed(fdt, nodeoffset, name, val) \
-	({ \
-		typeof(val) x = (val); \
-		fdt_setprop((fdt), (nodeoffset), (name), &x, sizeof(x)); \
-	})
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+				   uint32_t val)
+{
+	val = cpu_to_fdt32(val);
+	return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
 #define fdt_setprop_string(fdt, nodeoffset, name, str) \
 	fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
-int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
-			 const void *val, int len, int create);
 int fdt_delprop(void *fdt, int nodeoffset, const char *name);
 int fdt_add_subnode_namelen(void *fdt, int parentoffset,
 			    const char *name, int namelen);
 int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
 int fdt_del_node(void *fdt, int nodeoffset);
 
-/* Extra functions */
+/**********************************************************************/
+/* Debugging / informational functions                                */
+/**********************************************************************/
+
 const char *fdt_strerror(int errval);
 
 #endif /* _LIBFDT_H */
diff --git a/include/miiphy.h b/include/miiphy.h
index 71716b04d..5518a0a89 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -26,56 +26,49 @@
 |
 |  Author:	Mark Wisner
 |
-|  Change Activity-
-|
-|  Date	       Description of Change					BY
-|  ---------   ---------------------					---
-|  04-May-99   Created							MKW
-|  07-Jul-99   Added full duplex support				MKW
-|  08-Sep-01   Tweaks							gvb
-|
 +----------------------------------------------------------------------------*/
 #ifndef _miiphy_h_
 #define _miiphy_h_
 
 #include <net.h>
 
-int  miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		unsigned short *value);
-int  miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-		unsigned short value);
-int  miiphy_info(char *devname, unsigned char addr, unsigned int  *oui,
-		unsigned char *model, unsigned char *rev);
-int  miiphy_reset(char *devname, unsigned char addr);
-int  miiphy_speed(char *devname, unsigned char addr);
-int  miiphy_duplex(char *devname, unsigned char addr);
+int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+		 unsigned short *value);
+int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+		  unsigned short value);
+int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
+		 unsigned char *model, unsigned char *rev);
+int miiphy_reset (char *devname, unsigned char addr);
+int miiphy_speed (char *devname, unsigned char addr);
+int miiphy_duplex (char *devname, unsigned char addr);
+int miiphy_is_1000base_x (char *devname, unsigned char addr);
 #ifdef CFG_FAULT_ECHO_LINK_DOWN
-int  miiphy_link(char *devname, unsigned char addr);
+int miiphy_link (char *devname, unsigned char addr);
 #endif
 
-void miiphy_init(void);
+void miiphy_init (void);
 
-void miiphy_register(char *devname,
-	int (* read)(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short *value),
-	int (* write)(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value));
+void miiphy_register (char *devname,
+		      int (*read) (char *devname, unsigned char addr,
+				   unsigned char reg, unsigned short *value),
+		      int (*write) (char *devname, unsigned char addr,
+				    unsigned char reg, unsigned short value));
 
-int miiphy_set_current_dev(char *devname);
-char *miiphy_get_current_dev(void);
+int miiphy_set_current_dev (char *devname);
+char *miiphy_get_current_dev (void);
 
-void miiphy_listdev(void);
+void miiphy_listdev (void);
 
 #define BB_MII_DEVNAME	"bbmii"
 
 int bb_miiphy_read (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short *value);
+		    unsigned char reg, unsigned short *value);
 int bb_miiphy_write (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value);
+		     unsigned char reg, unsigned short value);
 
 /* phy seed setup */
 #define AUTO			99
-#define _1000BASET              1000
+#define _1000BASET		1000
 #define _100BASET		100
 #define _10BASET		10
 #define HALF			22
@@ -90,9 +83,10 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 #define PHY_ANLPAR		0x05
 #define PHY_ANER		0x06
 #define PHY_ANNPTR		0x07
-#define PHY_ANLPNP              0x08
-#define PHY_1000BTCR            0x09
-#define PHY_1000BTSR            0x0A
+#define PHY_ANLPNP		0x08
+#define PHY_1000BTCR		0x09
+#define PHY_1000BTSR		0x0A
+#define PHY_EXSR		0x0F
 #define PHY_PHYSTS		0x10
 #define PHY_MIPSCR		0x11
 #define PHY_MIPGSR		0x12
@@ -115,10 +109,10 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 #define PHY_BMCR_DPLX		0x0100
 #define PHY_BMCR_COL_TST	0x0080
 
-#define PHY_BMCR_SPEED_MASK     0x2040
-#define PHY_BMCR_1000_MBPS      0x0040
-#define PHY_BMCR_100_MBPS       0x2000
-#define PHY_BMCR_10_MBPS        0x0000
+#define PHY_BMCR_SPEED_MASK	0x2040
+#define PHY_BMCR_1000_MBPS	0x0040
+#define PHY_BMCR_100_MBPS	0x2000
+#define PHY_BMCR_10_MBPS	0x0000
 
 /* phy BMSR */
 #define PHY_BMSR_100T4		0x8000
@@ -126,6 +120,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 #define PHY_BMSR_100TXH		0x2000
 #define PHY_BMSR_10TF		0x1000
 #define PHY_BMSR_10TH		0x0800
+#define PHY_BMSR_EXT_STAT	0x0100
 #define PHY_BMSR_PRE_SUP	0x0040
 #define PHY_BMSR_AUTN_COMP	0x0020
 #define PHY_BMSR_RF		0x0010
@@ -138,23 +133,42 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 #define PHY_ANLPAR_NP		0x8000
 #define PHY_ANLPAR_ACK		0x4000
 #define PHY_ANLPAR_RF		0x2000
+#define PHY_ANLPAR_ASYMP	0x0800
+#define PHY_ANLPAR_PAUSE	0x0400
 #define PHY_ANLPAR_T4		0x0200
 #define PHY_ANLPAR_TXFD		0x0100
 #define PHY_ANLPAR_TX		0x0080
 #define PHY_ANLPAR_10FD		0x0040
 #define PHY_ANLPAR_10		0x0020
-#define PHY_ANLPAR_100		0x0380	    /* we can run at 100 */
-
-#define PHY_ANLPAR_PSB_MASK     0x001f
-#define PHY_ANLPAR_PSB_802_3    0x0001
-#define PHY_ANLPAR_PSB_802_9    0x0002
-
-/* PHY_1000BTSR */
-#define PHY_1000BTSR_MSCF       0x8000
-#define PHY_1000BTSR_MSCR       0x4000
-#define PHY_1000BTSR_LRS        0x2000
-#define PHY_1000BTSR_RRS        0x1000
-#define PHY_1000BTSR_1000FD     0x0800
-#define PHY_1000BTSR_1000HD     0x0400
+#define PHY_ANLPAR_100		0x0380	/* we can run at 100 */
+/* phy ANLPAR 1000BASE-X */
+#define PHY_X_ANLPAR_NP		0x8000
+#define PHY_X_ANLPAR_ACK	0x4000
+#define PHY_X_ANLPAR_RF_MASK	0x3000
+#define PHY_X_ANLPAR_PAUSE_MASK	0x0180
+#define PHY_X_ANLPAR_HD		0x0040
+#define PHY_X_ANLPAR_FD		0x0020
+
+#define PHY_ANLPAR_PSB_MASK	0x001f
+#define PHY_ANLPAR_PSB_802_3	0x0001
+#define PHY_ANLPAR_PSB_802_9	0x0002
+
+/* phy 1000BTCR */
+#define PHY_1000BTCR_1000FD	0x0200
+#define PHY_1000BTCR_1000HD	0x0100
+
+/* phy 1000BTSR */
+#define PHY_1000BTSR_MSCF	0x8000
+#define PHY_1000BTSR_MSCR	0x4000
+#define PHY_1000BTSR_LRS	0x2000
+#define PHY_1000BTSR_RRS	0x1000
+#define PHY_1000BTSR_1000FD	0x0800
+#define PHY_1000BTSR_1000HD	0x0400
+
+/* phy EXSR */
+#define PHY_EXSR_1000XF		0x8000
+#define PHY_EXSR_1000XH		0x4000
+#define PHY_EXSR_1000TF		0x2000
+#define PHY_EXSR_1000TH		0x1000
 
 #endif
diff --git a/include/ppc405.h b/include/ppc405.h
index 0c7bf3e6d..b5ad38fc5 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -22,6 +22,12 @@
 #ifndef	__PPC405_H__
 #define __PPC405_H__
 
+#ifndef CONFIG_IOP480
+#define CFG_DCACHE_SIZE		(16 << 10)	/* For AMCC 405 CPUs	*/
+#else
+#define CFG_DCACHE_SIZE		(2 << 10)	/* For PLX IOP480 (403)	*/
+#endif
+
 /*--------------------------------------------------------------------- */
 /* Special Purpose Registers						*/
 /*--------------------------------------------------------------------- */
@@ -123,6 +129,40 @@
 #define uicvr        (UIC_DCR_BASE+0x7)  /* UIC vector                       */
 #define uicvcr       (UIC_DCR_BASE+0x8)  /* UIC vector configuration         */
 
+#if defined(CONFIG_405EX)
+#define uic0sr        uicsr		/* UIC status            */
+#define uic0srs       uicsrs		/* UIC status set        */
+#define uic0er        uicer		/* UIC enable            */
+#define uic0cr        uiccr		/* UIC critical          */
+#define uic0pr        uicpr		/* UIC polarity          */
+#define uic0tr        uictr		/* UIC triggering        */
+#define uic0msr       uicmsr		/* UIC masked status     */
+#define uic0vr        uicvr		/* UIC vector            */
+#define uic0vcr       uicvcr		/* UIC vector configuration*/
+
+#define UIC_DCR_BASE1 0xd0
+#define uic1sr        (UIC_DCR_BASE1+0x0)  /* UIC status            */
+#define uic1srs       (UIC_DCR_BASE1+0x1)  /* UIC status set        */
+#define uic1er        (UIC_DCR_BASE1+0x2)  /* UIC enable            */
+#define uic1cr        (UIC_DCR_BASE1+0x3)  /* UIC critical          */
+#define uic1pr        (UIC_DCR_BASE1+0x4)  /* UIC polarity          */
+#define uic1tr        (UIC_DCR_BASE1+0x5)  /* UIC triggering        */
+#define uic1msr       (UIC_DCR_BASE1+0x6)  /* UIC masked status     */
+#define uic1vr        (UIC_DCR_BASE1+0x7)  /* UIC vector            */
+#define uic1vcr       (UIC_DCR_BASE1+0x8)  /* UIC vector configuration*/
+
+#define UIC_DCR_BASE2 0xe0
+#define uic2sr        (UIC_DCR_BASE2+0x0)  /* UIC status            */
+#define uic2srs       (UIC_DCR_BASE2+0x1)  /* UIC status set        */
+#define uic2er        (UIC_DCR_BASE2+0x2)  /* UIC enable            */
+#define uic2cr        (UIC_DCR_BASE2+0x3)  /* UIC critical          */
+#define uic2pr        (UIC_DCR_BASE2+0x4)  /* UIC polarity          */
+#define uic2tr        (UIC_DCR_BASE2+0x5)  /* UIC triggering        */
+#define uic2msr       (UIC_DCR_BASE2+0x6)  /* UIC masked status     */
+#define uic2vr        (UIC_DCR_BASE2+0x7)  /* UIC vector            */
+#define uic2vcr       (UIC_DCR_BASE2+0x8)  /* UIC vector configuration*/
+#endif
+
 /*-----------------------------------------------------------------------------+
 |  Universal interrupt controller interrupts
 +-----------------------------------------------------------------------------*/
@@ -166,6 +206,116 @@
 #define UIC_EXT3	0x00000002	/* External  interrupt 3	*/
 #define UIC_EXT4	0x00000001	/* External  interrupt 4	*/
 
+#elif defined(CONFIG_405EX)
+
+/* UIC 0 */
+#define UIC_U0			0x80000000      /* */
+#define UIC_U1			0x40000000      /* */
+#define UIC_IIC0		0x20000000      /* */
+#define UIC_PKA			0x10000000      /* */
+#define UIC_TRNG		0x08000000      /* */
+#define UIC_EBM			0x04000000      /* */
+#define UIC_BGI			0x02000000      /* */
+#define UIC_IIC1		0x01000000      /* */
+#define UIC_SPI			0x00800000      /* */
+#define UIC_EIRQ0		0x00400000      /**/
+#define UIC_MTE			0x00200000      /*MAL Tx EOB */
+#define UIC_MRE			0x00100000      /*MAL Rx EOB */
+#define UIC_DMA0		0x00080000      /* */
+#define UIC_DMA1		0x00040000      /* */
+#define UIC_DMA2		0x00020000      /* */
+#define UIC_DMA3		0x00010000      /* */
+#define UIC_PCIE0AL		0x00008000      /* */
+#define UIC_PCIE0VPD		0x00004000      /* */
+#define UIC_RPCIE0HRST		0x00002000      /* */
+#define UIC_FPCIE0HRST		0x00001000      /* */
+#define UIC_PCIE0TCR		0x00000800      /* */
+#define UIC_PCIEMSI0		0x00000400      /* */
+#define UIC_PCIEMSI1		0x00000200      /* */
+#define UIC_SECURITY		0x00000100      /* */
+#define UIC_ENET		0x00000080      /* */
+#define UIC_ENET1		0x00000040      /* */
+#define UIC_PCIEMSI2		0x00000020      /* */
+#define UIC_EIRQ4		0x00000010      /**/
+#define UIC_UIC2NC		0x00000008      /* */
+#define UIC_UIC2C		0x00000004      /* */
+#define UIC_UIC1NC		0x00000002      /* */
+#define UIC_UIC1C		0x00000001      /* */
+
+#define UIC_MAL_TXEOB 		UIC_MTE/* MAL TXEOB                          */
+#define UIC_MAL_RXEOB 		UIC_MRE/* MAL RXEOB                          */
+/* UIC 1 */
+#define UIC_MS			0x80000000      /* MAL SERR */
+#define UIC_MTDE		0x40000000      /* MAL TXDE */
+#define UIC_MRDE		0x20000000      /* MAL RXDE */
+#define UIC_PCIE0BMVC0		0x10000000      /* */
+#define UIC_PCIE0DCRERR		0x08000000      /* */
+#define UIC_EBC			0x04000000      /* */
+#define UIC_NDFC		0x02000000      /* */
+#define UIC_PCEI1DCRERR		0x01000000      /* */
+#define UIC_GPTCMPT8		0x00800000      /* */
+#define UIC_GPTCMPT9		0x00400000      /* */
+#define UIC_PCIE1AL		0x00200000      /* */
+#define UIC_PCIE1VPD		0x00100000      /* */
+#define UIC_RPCE1HRST		0x00080000      /* */
+#define UIC_FPCE1HRST		0x00040000      /* */
+#define UIC_PCIE1TCR		0x00020000      /* */
+#define UIC_PCIE1VC0		0x00010000      /* */
+#define UIC_GPTCMPT3		0x00008000      /* */
+#define UIC_GPTCMPT4		0x00004000      /* */
+#define UIC_EIRQ7		0x00002000      /* */
+#define UIC_EIRQ8		0x00001000      /* */
+#define UIC_EIRQ9		0x00000800      /* */
+#define UIC_GPTCMP5		0x00000400      /* */
+#define UIC_GPTCMP6		0x00000200      /* */
+#define UIC_GPTCMP7		0x00000100      /* */
+#define UIC_SROM		0x00000080      /* SERIAL ROM*/
+#define UIC_GPTDECPULS		0x00000040      /* GPT Decrement pulse*/
+#define UIC_EIRQ2		0x00000020      /* */
+#define UIC_EIRQ5		0x00000010      /* */
+#define UIC_EIRQ6		0x00000008      /* */
+#define UIC_EMAC0WAKE		0x00000004      /* */
+#define UIC_EIRQ1		0x00000002      /* */
+#define UIC_EMAC1WAKE		0x00000001      /* */
+#define UIC_MAL_SERR		UIC_MS 		/* MAL SERR     */
+#define UIC_MAL_TXDE		UIC_MTDE		/* MAL TXDE     */
+#define UIC_MAL_RXDE		UIC_MRDE 		/* MAL RXDE     */
+/* UIC 2 */
+#define UIC_PCIE0INTA		0x80000000      /* PCIE0 INTA*/
+#define UIC_PCIE0INTB		0x40000000      /* PCIE0 INTB*/
+#define UIC_PCIE0INTC		0x20000000      /* PCIE0 INTC*/
+#define UIC_PCIE0INTD		0x10000000      /* PCIE0 INTD*/
+#define UIC_EIRQ3		0x08000000      /* External IRQ 3*/
+#define UIC_DDRMCUE		0x04000000      /* */
+#define UIC_DDRMCCE		0x02000000      /* */
+#define UIC_MALINTCOATX0	0x01000000      /* Interrupt coalecence TX0*/
+#define UIC_MALINTCOATX1	0x00800000      /* Interrupt coalecence TX1*/
+#define UIC_MALINTCOARX0	0x00400000      /* Interrupt coalecence RX0*/
+#define UIC_MALINTCOARX1	0x00200000      /* Interrupt coalecence RX1*/
+#define UIC_PCIE1INTA		0x00100000      /* PCIE0 INTA*/
+#define UIC_PCIE1INTB		0x00080000      /* PCIE0 INTB*/
+#define UIC_PCIE1INTC		0x00040000      /* PCIE0 INTC*/
+#define UIC_PCIE1INTD		0x00020000      /* PCIE0 INTD*/
+#define UIC_RPCIEMSI2		0x00010000      /* MSI level 2 Note this looks same as uic0-26*/
+#define UIC_PCIEMSI3		0x00008000      /* MSI level 2*/
+#define UIC_PCIEMSI4		0x00004000      /* MSI level 2*/
+#define UIC_PCIEMSI5		0x00002000      /* MSI level 2*/
+#define UIC_PCIEMSI6		0x00001000      /* MSI level 2*/
+#define UIC_PCIEMSI7		0x00000800      /* MSI level 2*/
+#define UIC_PCIEMSI8		0x00000400      /* MSI level 2*/
+#define UIC_PCIEMSI9		0x00000200      /* MSI level 2*/
+#define UIC_PCIEMSI10		0x00000100      /* MSI level 2*/
+#define UIC_PCIEMSI11		0x00000080      /* MSI level 2*/
+#define UIC_PCIEMSI12		0x00000040      /* MSI level 2*/
+#define UIC_PCIEMSI13		0x00000020      /* MSI level 2*/
+#define UIC_PCIEMSI14		0x00000010      /* MSI level 2*/
+#define UIC_PCIEMSI15		0x00000008      /* MSI level 2*/
+#define UIC_PLB4XAHB		0x00000004      /* PLBxAHB bridge*/
+#define UIC_USBWAKE		0x00000002      /* USB wakup*/
+#define UIC_USBOTG		0x00000001      /*  USB OTG*/
+#define UIC_ETH0	UIC_ENET
+#define UIC_ETH1	UIC_ENET1
+
 #else	/* !defined(CONFIG_405EZ) */
 
 #define UIC_UART0     0x80000000      /* UART 0                             */
@@ -200,9 +350,6 @@
 /******************************************************************************
  * SDRAM Controller
  ******************************************************************************/
-#define SDRAM_DCR_BASE 0x10
-#define memcfga  (SDRAM_DCR_BASE+0x0)   /* Memory configuration address reg  */
-#define memcfgd  (SDRAM_DCR_BASE+0x1)   /* Memory configuration data    reg  */
   /* values for memcfga register - indirect addressing of these regs */
 #ifndef CONFIG_405EP
   #define mem_besra   0x00    /* bus error syndrome reg a	     */
@@ -256,7 +403,11 @@
 /******************************************************************************
  * Power Management
  ******************************************************************************/
+#ifdef CONFIG_405EX
+#define POWERMAN_DCR_BASE 0xb0
+#else
 #define POWERMAN_DCR_BASE 0xb8
+#endif
 #define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status             */
 #define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable             */
 #define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force              */
@@ -264,9 +415,6 @@
 /******************************************************************************
  * Extrnal Bus Controller
  ******************************************************************************/
-#define EBC_DCR_BASE 0x12
-#define ebccfga (EBC_DCR_BASE+0x0)   /* External bus controller addr reg     */
-#define ebccfgd (EBC_DCR_BASE+0x1)   /* External bus controller data reg     */
   /* values for ebccfga register - indirect addressing of these regs */
   #define pb0cr       0x00    /* periph bank 0 config reg            */
   #define pb1cr       0x01    /* periph bank 1 config reg            */
@@ -561,16 +709,6 @@
 #define VCO_MIN     500
 #define VCO_MAX     1000
 #elif defined(CONFIG_405EZ)
-/******************************************************************************
- * SDR Registers
- ******************************************************************************/
-#define SDR_DCR_BASE 0x0E
-#define sdrcfga (SDR_DCR_BASE+0x0)	/* ADDR */
-#define sdrcfgd (SDR_DCR_BASE+0x1)	/* Data */
-
-#define mtsdr(reg, data)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
-#define mfsdr(reg, data)	do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
-
 #define sdrnand0	0x4000
 #define sdrultra0	0x4040
 #define sdrultra1	0x4050
@@ -604,10 +742,6 @@
 /******************************************************************************
  * Control
  ******************************************************************************/
-#define CNTRL_DCR_BASE 0x0C
-#define cprcfga (CNTRL_DCR_BASE+0x0)   /* CPR addr reg     */
-#define cprcfgd (CNTRL_DCR_BASE+0x1)   /* CPR data reg     */
-
 /* CPR Registers */
 #define cprclkupd       0x020		/* CPR_CLKUPD */
 #define cprpllc         0x040		/* CPR_PLLC */
@@ -619,12 +753,6 @@
 #define cprmisc0        0x181		/* CPR_MISC0 */
 #define cprmisc1        0x182		/* CPR_MISC1 */
 
-/*
- * Macro for accessing the indirect CPR register
- */
-#define mtcpr(reg, data)	do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,data); } while (0)
-#define mfcpr(reg, data)	do { mtdcr(cprcfga,reg);data = mfdcr(cprcfgd); } while (0)
-
 #define CPR_CLKUPD_ENPLLCH_EN  0x40000000     /* Enable CPR PLL Changes */
 #define CPR_CLKUPD_ENDVCH_EN   0x20000000     /* Enable CPR Sys. Div. Changes */
 #define CPR_PERD0_SPIDV_MASK   0x000F0000     /* SPI Clock Divider */
@@ -645,252 +773,6 @@
 #define PERD0_U0DV_MASK        0x0000FF00     /* UART 0 Divider Mask */
 #define PERD0_U1DV_MASK        0x000000FF     /* UART 1 Divider Mask */
 
-#if 0 /* Deprecated */
-#define CNTRL_DCR_BASE 0x0f0
-#define cpc0_pllmr0   (CNTRL_DCR_BASE+0x0)  /* PLL mode  register 0                */
-#define cpc0_boot     (CNTRL_DCR_BASE+0x1)  /* Clock status register               */
-#define cpc0_epctl    (CNTRL_DCR_BASE+0x3)  /* EMAC to PHY control register        */
-#define cpc0_pllmr1   (CNTRL_DCR_BASE+0x4)  /* PLL mode  register 1                */
-#define cpc0_ucr      (CNTRL_DCR_BASE+0x5)  /* UART control register               */
-#define cpc0_pci      (CNTRL_DCR_BASE+0x9)  /* PCI control register                */
-
-#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register          */
-#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register   */
-#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register      */
-#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register*/
-#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register          */
-#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register        */
-#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register          */
-#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register             */
-#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR                    */
-#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register         */
-
-/* Bit definitions */
-#define PLLMR0_CPU_DIV_MASK      0x00300000     /* CPU clock divider */
-#define PLLMR0_CPU_DIV_BYPASS    0x00000000
-#define PLLMR0_CPU_DIV_2         0x00100000
-#define PLLMR0_CPU_DIV_3         0x00200000
-#define PLLMR0_CPU_DIV_4         0x00300000
-
-#define PLLMR0_CPU_TO_PLB_MASK   0x00030000     /* CPU:PLB Frequency Divisor */
-#define PLLMR0_CPU_PLB_DIV_1     0x00000000
-#define PLLMR0_CPU_PLB_DIV_2     0x00010000
-#define PLLMR0_CPU_PLB_DIV_3     0x00020000
-#define PLLMR0_CPU_PLB_DIV_4     0x00030000
-
-#define PLLMR0_OPB_TO_PLB_MASK   0x00003000     /* OPB:PLB Frequency Divisor */
-#define PLLMR0_OPB_PLB_DIV_1     0x00000000
-#define PLLMR0_OPB_PLB_DIV_2     0x00001000
-#define PLLMR0_OPB_PLB_DIV_3     0x00002000
-#define PLLMR0_OPB_PLB_DIV_4     0x00003000
-
-#define PLLMR0_EXB_TO_PLB_MASK   0x00000300     /* External Bus:PLB Divisor  */
-#define PLLMR0_EXB_PLB_DIV_2     0x00000000
-#define PLLMR0_EXB_PLB_DIV_3     0x00000100
-#define PLLMR0_EXB_PLB_DIV_4     0x00000200
-#define PLLMR0_EXB_PLB_DIV_5     0x00000300
-
-#define PLLMR0_MAL_TO_PLB_MASK   0x00000030     /* MAL:PLB Divisor  */
-#define PLLMR0_MAL_PLB_DIV_1     0x00000000
-#define PLLMR0_MAL_PLB_DIV_2     0x00000010
-#define PLLMR0_MAL_PLB_DIV_3     0x00000020
-#define PLLMR0_MAL_PLB_DIV_4     0x00000030
-
-#define PLLMR0_PCI_TO_PLB_MASK   0x00000003     /* PCI:PLB Frequency Divisor */
-#define PLLMR0_PCI_PLB_DIV_1     0x00000000
-#define PLLMR0_PCI_PLB_DIV_2     0x00000001
-#define PLLMR0_PCI_PLB_DIV_3     0x00000002
-#define PLLMR0_PCI_PLB_DIV_4     0x00000003
-
-#define PLLMR1_SSCS_MASK         0x80000000     /* Select system clock source */
-#define PLLMR1_PLLR_MASK         0x40000000     /* PLL reset */
-#define PLLMR1_FBMUL_MASK        0x00F00000     /* PLL feedback multiplier value */
-#define PLLMR1_FBMUL_DIV_16      0x00000000
-#define PLLMR1_FBMUL_DIV_1       0x00100000
-#define PLLMR1_FBMUL_DIV_2       0x00200000
-#define PLLMR1_FBMUL_DIV_3       0x00300000
-#define PLLMR1_FBMUL_DIV_4       0x00400000
-#define PLLMR1_FBMUL_DIV_5       0x00500000
-#define PLLMR1_FBMUL_DIV_6       0x00600000
-#define PLLMR1_FBMUL_DIV_7       0x00700000
-#define PLLMR1_FBMUL_DIV_8       0x00800000
-#define PLLMR1_FBMUL_DIV_9       0x00900000
-#define PLLMR1_FBMUL_DIV_10      0x00A00000
-#define PLLMR1_FBMUL_DIV_11      0x00B00000
-#define PLLMR1_FBMUL_DIV_12      0x00C00000
-#define PLLMR1_FBMUL_DIV_13      0x00D00000
-#define PLLMR1_FBMUL_DIV_14      0x00E00000
-#define PLLMR1_FBMUL_DIV_15      0x00F00000
-
-#define PLLMR1_FWDVA_MASK        0x00070000     /* PLL forward divider A value */
-#define PLLMR1_FWDVA_DIV_8       0x00000000
-#define PLLMR1_FWDVA_DIV_7       0x00010000
-#define PLLMR1_FWDVA_DIV_6       0x00020000
-#define PLLMR1_FWDVA_DIV_5       0x00030000
-#define PLLMR1_FWDVA_DIV_4       0x00040000
-#define PLLMR1_FWDVA_DIV_3       0x00050000
-#define PLLMR1_FWDVA_DIV_2       0x00060000
-#define PLLMR1_FWDVA_DIV_1       0x00070000
-#define PLLMR1_FWDVB_MASK        0x00007000     /* PLL forward divider B value */
-#define PLLMR1_TUNING_MASK       0x000003FF     /* PLL tune bits */
-
-/* Defines for CPC0_EPRCSR register */
-#define CPC0_EPRCSR_E0NFE          0x80000000
-#define CPC0_EPRCSR_E1NFE          0x40000000
-#define CPC0_EPRCSR_E1RPP          0x00000080
-#define CPC0_EPRCSR_E0RPP          0x00000040
-#define CPC0_EPRCSR_E1ERP          0x00000020
-#define CPC0_EPRCSR_E0ERP          0x00000010
-#define CPC0_EPRCSR_E1PCI          0x00000002
-#define CPC0_EPRCSR_E0PCI          0x00000001
-
-/* Defines for CPC0_BOOR Register */
-#define CPC0_BOOT_SEP                      0x00000002 /* serial EEPROM present  */
-
-/* Defines for CPC0_PLLMR1 Register fields */
-#define PLL_ACTIVE                 0x80000000
-#define CPC0_PLLMR1_SSCS           0x80000000
-#define PLL_RESET                  0x40000000
-#define CPC0_PLLMR1_PLLR           0x40000000
-    /* Feedback multiplier */
-#define PLL_FBKDIV                 0x00F00000
-#define CPC0_PLLMR1_FBDV           0x00F00000
-#define PLL_FBKDIV_16              0x00000000
-#define PLL_FBKDIV_1               0x00100000
-#define PLL_FBKDIV_2               0x00200000
-#define PLL_FBKDIV_3               0x00300000
-#define PLL_FBKDIV_4               0x00400000
-#define PLL_FBKDIV_5               0x00500000
-#define PLL_FBKDIV_6               0x00600000
-#define PLL_FBKDIV_7               0x00700000
-#define PLL_FBKDIV_8               0x00800000
-#define PLL_FBKDIV_9               0x00900000
-#define PLL_FBKDIV_10              0x00A00000
-#define PLL_FBKDIV_11              0x00B00000
-#define PLL_FBKDIV_12              0x00C00000
-#define PLL_FBKDIV_13              0x00D00000
-#define PLL_FBKDIV_14              0x00E00000
-#define PLL_FBKDIV_15              0x00F00000
-    /* Forward A divisor */
-#define PLL_FWDDIVA                0x00070000
-#define CPC0_PLLMR1_FWDVA          0x00070000
-#define PLL_FWDDIVA_8              0x00000000
-#define PLL_FWDDIVA_7              0x00010000
-#define PLL_FWDDIVA_6              0x00020000
-#define PLL_FWDDIVA_5              0x00030000
-#define PLL_FWDDIVA_4              0x00040000
-#define PLL_FWDDIVA_3              0x00050000
-#define PLL_FWDDIVA_2              0x00060000
-#define PLL_FWDDIVA_1              0x00070000
-    /* Forward B divisor */
-#define PLL_FWDDIVB                0x00007000
-#define CPC0_PLLMR1_FWDVB          0x00007000
-#define PLL_FWDDIVB_8              0x00000000
-#define PLL_FWDDIVB_7              0x00001000
-#define PLL_FWDDIVB_6              0x00002000
-#define PLL_FWDDIVB_5              0x00003000
-#define PLL_FWDDIVB_4              0x00004000
-#define PLL_FWDDIVB_3              0x00005000
-#define PLL_FWDDIVB_2              0x00006000
-#define PLL_FWDDIVB_1              0x00007000
-    /* PLL tune bits */
-#define PLL_TUNE_MASK            0x000003FF
-#define PLL_TUNE_2_M_3           0x00000133     /*  2 <= M <= 3               */
-#define PLL_TUNE_4_M_6           0x00000134     /*  3 <  M <= 6               */
-#define PLL_TUNE_7_M_10          0x00000138     /*  6 <  M <= 10              */
-#define PLL_TUNE_11_M_14         0x0000013C     /* 10 <  M <= 14              */
-#define PLL_TUNE_15_M_40         0x0000023E     /* 14 <  M <= 40              */
-#define PLL_TUNE_VCO_LOW         0x00000000     /* 500MHz <= VCO <=  800MHz   */
-#define PLL_TUNE_VCO_HI          0x00000080     /* 800MHz <  VCO <= 1000MHz   */
-
-/* Defines for CPC0_PLLMR0 Register fields */
-    /* CPU divisor */
-#define PLL_CPUDIV                 0x00300000
-#define CPC0_PLLMR0_CCDV           0x00300000
-#define PLL_CPUDIV_1               0x00000000
-#define PLL_CPUDIV_2               0x00100000
-#define PLL_CPUDIV_3               0x00200000
-#define PLL_CPUDIV_4               0x00300000
-    /* PLB divisor */
-#define PLL_PLBDIV                 0x00030000
-#define CPC0_PLLMR0_CBDV           0x00030000
-#define PLL_PLBDIV_1               0x00000000
-#define PLL_PLBDIV_2               0x00010000
-#define PLL_PLBDIV_3               0x00020000
-#define PLL_PLBDIV_4               0x00030000
-    /* OPB divisor */
-#define PLL_OPBDIV                 0x00003000
-#define CPC0_PLLMR0_OPDV           0x00003000
-#define PLL_OPBDIV_1               0x00000000
-#define PLL_OPBDIV_2               0x00001000
-#define PLL_OPBDIV_3               0x00002000
-#define PLL_OPBDIV_4               0x00003000
-    /* EBC divisor */
-#define PLL_EXTBUSDIV              0x00000300
-#define CPC0_PLLMR0_EPDV           0x00000300
-#define PLL_EXTBUSDIV_2            0x00000000
-#define PLL_EXTBUSDIV_3            0x00000100
-#define PLL_EXTBUSDIV_4            0x00000200
-#define PLL_EXTBUSDIV_5            0x00000300
-    /* MAL divisor */
-#define PLL_MALDIV                 0x00000030
-#define CPC0_PLLMR0_MPDV           0x00000030
-#define PLL_MALDIV_1               0x00000000
-#define PLL_MALDIV_2               0x00000010
-#define PLL_MALDIV_3               0x00000020
-#define PLL_MALDIV_4               0x00000030
-    /* PCI divisor */
-#define PLL_PCIDIV                 0x00000003
-#define CPC0_PLLMR0_PPFD           0x00000003
-#define PLL_PCIDIV_1               0x00000000
-#define PLL_PCIDIV_2               0x00000001
-#define PLL_PCIDIV_3               0x00000002
-#define PLL_PCIDIV_4               0x00000003
-
-/*
- *-------------------------------------------------------------------------------
- * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
- * assuming a 33.3MHz input clock to the 405EP.
- *-------------------------------------------------------------------------------
- */
-#define PLLMR0_266_133_66  (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
-			    PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
-			    PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_266_133_66  (PLL_FBKDIV_8  |  \
-			    PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
-			    PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_133_66_66_33  (PLL_CPUDIV_1 | PLL_PLBDIV_1 |  \
-			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
-			      PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_133_66_66_33  (PLL_FBKDIV_4  |  \
-			      PLL_FWDDIVA_6 | PLL_FWDDIVB_6 |  \
-			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
-			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 |  \
-			      PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6  |  \
-			      PLL_FWDDIVA_4 | PLL_FWDDIVB_4 |  \
-			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
-			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
-			      PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8  |  \
-			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
-			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 |  \
-			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
-			      PLL_MALDIV_1 | PLL_PCIDIV_2)
-#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8  |  \
-			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
-			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-
-/*
- * PLL Voltage Controlled Oscillator (VCO) definitions
- * Maximum and minimum values (in MHz) for correct PLL operation.
- */
-#define VCO_MIN     500
-#define VCO_MAX     1000
-#endif /* #if 0 */
 #else /* #ifdef CONFIG_405EP */
 /******************************************************************************
  * Control
@@ -1214,6 +1096,25 @@
 #define GPIO1_ISR3L		(GPIO1_BASE+0x40)
 #define GPIO1_ISR3H		(GPIO1_BASE+0x44)
 
+#elif defined(CONFIG_405EX)
+#define GPIO_BASE  0xEF600800
+#define GPIO0_OR               (GPIO_BASE+0x0)
+#define GPIO0_TCR              (GPIO_BASE+0x4)
+#define GPIO0_OSRL             (GPIO_BASE+0x8)
+#define GPIO0_OSRH             (GPIO_BASE+0xC)
+#define GPIO0_TSRL             (GPIO_BASE+0x10)
+#define GPIO0_TSRH             (GPIO_BASE+0x14)
+#define GPIO0_ODR              (GPIO_BASE+0x18)
+#define GPIO0_IR               (GPIO_BASE+0x1C)
+#define GPIO0_RR1              (GPIO_BASE+0x20)
+#define GPIO0_RR2              (GPIO_BASE+0x24)
+#define GPIO0_ISR1L            (GPIO_BASE+0x30)
+#define GPIO0_ISR1H            (GPIO_BASE+0x34)
+#define GPIO0_ISR2L            (GPIO_BASE+0x38)
+#define GPIO0_ISR2H            (GPIO_BASE+0x3C)
+#define GPIO0_ISR3L            (GPIO_BASE+0x40)
+#define GPIO0_ISR3H            (GPIO_BASE+0x44)
+
 #else	/* !405EZ */
 
 #define GPIO_BASE  0xEF600700
@@ -1234,39 +1135,458 @@
 
 #endif /* CONFIG_405EZ */
 
-/*
- * Macro for accessing the indirect EBC register
- */
-#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-#define mfebc(reg, data)  mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
-
-#define mtsdram(reg, data)	do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
-#define mfsdram(reg, data)	do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
-
-#ifndef __ASSEMBLY__
-
-typedef struct
-{
-  unsigned long pllFwdDiv;
-  unsigned long pllFwdDivB;
-  unsigned long pllFbkDiv;
-  unsigned long pllPlbDiv;
-  unsigned long pllPciDiv;
-  unsigned long pllExtBusDiv;
-  unsigned long pllOpbDiv;
-  unsigned long freqVCOMhz;             /* in MHz                          */
-  unsigned long freqProcessor;
-  unsigned long freqPLB;
-  unsigned long freqPCI;
-  unsigned long pciIntArbEn;            /* Internal PCI arbiter is enabled */
-  unsigned long pciClkSync;             /* PCI clock is synchronous        */
-  unsigned long freqVCOHz;
-} PPC405_SYS_INFO;
-
-#endif  /* _ASMLANGUAGE */
-
-#define RESET_VECTOR	0xfffffffc
-#define CACHELINE_MASK	(CFG_CACHELINE_SIZE - 1) /* Address mask for cache
-						     line aligned data. */
+#define GPIO0_BASE		GPIO_BASE
+
+#if defined(CONFIG_405EX)
+#define SDR0_SRST		0x0200
+
+#define SDRAM_BESR0	0x00
+#define SDRAM_BEARL	0x02
+#define SDRAM_BEARU	0x03
+#define SDRAM_WMIRQ	0x06	/**/
+#define SDRAM_PLBOPT	0x08	/**/
+#define SDRAM_PUABA	0x09	/**/
+#define SDRAM_MCSTAT    0x1F    /* memory controller status           */
+#define SDRAM_MCOPT1    0x20    /* memory controller options 1        */
+#define SDRAM_MCOPT2    0x21    /* memory controller options 2        */
+#define SDRAM_MODT0     0x22    /* on die termination for bank 0      */
+#define SDRAM_MODT1     0x23    /* on die termination for bank 1      */
+#define SDRAM_MODT2     0x24    /* on die termination for bank 2      */
+#define SDRAM_MODT3     0x25    /* on die termination for bank 3      */
+#define SDRAM_CODT      0x26    /* on die termination for controller  */
+#define SDRAM_VVPR      0x27    /* variable VRef programmming         */
+#define SDRAM_OPARS     0x28    /* on chip driver control setup       */
+#define SDRAM_OPART     0x29    /* on chip driver control trigger     */
+#define SDRAM_RTR       0x30    /* refresh timer                      */
+#define SDRAM_PMIT      0x34    /* power management idle timer        */
+#define SDRAM_MB0CF     0x40    /* memory bank 0 configuration        */
+#define SDRAM_MB1CF     0x44    /* memory bank 1 configuration        */
+#define SDRAM_MB2CF     0x48    /* memory bank 2 configuration        */
+#define SDRAM_MB3CF     0x4C    /* memory bank 3 configuration        */
+#define SDRAM_INITPLR0  0x50    /* manual initialization control      */
+#define SDRAM_INITPLR1  0x51    /* manual initialization control      */
+#define SDRAM_INITPLR2  0x52    /* manual initialization control      */
+#define SDRAM_INITPLR3  0x53    /* manual initialization control      */
+#define SDRAM_INITPLR4  0x54    /* manual initialization control      */
+#define SDRAM_INITPLR5  0x55    /* manual initialization control      */
+#define SDRAM_INITPLR6  0x56    /* manual initialization control      */
+#define SDRAM_INITPLR7  0x57    /* manual initialization control      */
+#define SDRAM_INITPLR8  0x58    /* manual initialization control      */
+#define SDRAM_INITPLR9  0x59    /* manual initialization control      */
+#define SDRAM_INITPLR10 0x5a    /* manual initialization control      */
+#define SDRAM_INITPLR11 0x5b    /* manual initialization control      */
+#define SDRAM_INITPLR12 0x5c    /* manual initialization control      */
+#define SDRAM_INITPLR13 0x5d    /* manual initialization control      */
+#define SDRAM_INITPLR14 0x5e    /* manual initialization control      */
+#define SDRAM_INITPLR15 0x5f    /* manual initialization control      */
+#define SDRAM_RQDC      0x70    /* read DQS delay control             */
+#define SDRAM_RFDC      0x74    /* read feedback delay control        */
+#define SDRAM_RDCC      0x78    /* read data capture control          */
+#define SDRAM_DLCR      0x7A    /* delay line calibration             */
+#define SDRAM_CLKTR     0x80    /* DDR clock timing                   */
+#define SDRAM_WRDTR     0x81    /* write data, DQS, DM clock, timing  */
+#define SDRAM_SDTR1     0x85    /* DDR SDRAM timing 1                 */
+#define SDRAM_SDTR2     0x86    /* DDR SDRAM timing 2                 */
+#define SDRAM_SDTR3     0x87    /* DDR SDRAM timing 3                 */
+#define SDRAM_MMODE     0x88    /* memory mode                        */
+#define SDRAM_MEMODE    0x89    /* memory extended mode               */
+#define SDRAM_ECCCR     0x98    /* ECC error status                   */
+#define SDRAM_RID       0xF8    /* revision ID                        */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Bank 0-7 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_RXBAS_SDSZ_4         0x00000000      /*   4M                    */
+#define SDRAM_RXBAS_SDSZ_8         0x00001000      /*   8M                    */
+#define SDRAM_RXBAS_SDSZ_16        0x00002000      /*  16M                    */
+#define SDRAM_RXBAS_SDSZ_32        0x00003000      /*  32M                    */
+#define SDRAM_RXBAS_SDSZ_64        0x00004000      /*  64M                    */
+#define SDRAM_RXBAS_SDSZ_128       0x00005000      /* 128M                    */
+#define SDRAM_RXBAS_SDSZ_256       0x00006000      /* 256M                    */
+#define SDRAM_RXBAS_SDSZ_512       0x00007000      /* 512M                    */
+#define SDRAM_RXBAS_SDSZ_1024      0x00008000      /* 1024M                   */
+#define SDRAM_RXBAS_SDSZ_2048      0x00009000      /* 2048M                   */
+#define SDRAM_RXBAS_SDSZ_4096      0x0000a000      /* 4096M                   */
+#define SDRAM_RXBAS_SDSZ_8192      0x0000b000      /* 8192M                   */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Status
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCSTAT_MIC_MASK       0x80000000  /* Memory init status mask    */
+#define   SDRAM_MCSTAT_MIC_NOTCOMP  0x00000000  /* Mem init not complete      */
+#define   SDRAM_MCSTAT_MIC_COMP     0x80000000  /* Mem init complete          */
+#define SDRAM_MCSTAT_SRMS_MASK      0x80000000  /* Mem self refresh stat mask */
+#define   SDRAM_MCSTAT_SRMS_NOT_SF  0x00000000  /* Mem not in self refresh    */
+#define   SDRAM_MCSTAT_SRMS_SF      0x80000000  /* Mem in self refresh        */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Options 1
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT1_MCHK_MASK       0x30000000 /* Memory data err check mask */
+#define   SDRAM_MCOPT1_MCHK_NON      0x00000000 /* No ECC generation          */
+#define   SDRAM_MCOPT1_MCHK_GEN      0x20000000 /* ECC generation             */
+#define   SDRAM_MCOPT1_MCHK_CHK      0x10000000 /* ECC generation and check   */
+#define   SDRAM_MCOPT1_MCHK_CHK_REP  0x30000000 /* ECC generation, chk, report*/
+#define   SDRAM_MCOPT1_MCHK_CHK_DECODE(n)  ((((unsigned long)(n))>>28)&0x3)
+#define SDRAM_MCOPT1_RDEN_MASK       0x08000000 /* Registered DIMM mask       */
+#define   SDRAM_MCOPT1_RDEN          0x08000000 /* Registered DIMM enable     */
+#define SDRAM_MCOPT1_PMU_MASK        0x06000000 /* Page management unit mask  */
+#define   SDRAM_MCOPT1_PMU_CLOSE     0x00000000 /* PMU Close                  */
+#define   SDRAM_MCOPT1_PMU_OPEN      0x04000000 /* PMU Open                   */
+#define   SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose              */
+#define SDRAM_MCOPT1_DMWD_MASK       0x01000000 /* DRAM width mask            */
+#define   SDRAM_MCOPT1_DMWD_32       0x00000000 /* 32 bits                    */
+#define   SDRAM_MCOPT1_DMWD_64       0x01000000 /* 64 bits                    */
+#define SDRAM_MCOPT1_UIOS_MASK       0x00C00000 /* Unused IO State            */
+#define SDRAM_MCOPT1_BCNT_MASK       0x00200000 /* Bank count                 */
+#define   SDRAM_MCOPT1_4_BANKS       0x00000000 /* 4 Banks                    */
+#define   SDRAM_MCOPT1_8_BANKS       0x00200000 /* 8 Banks                    */
+#define SDRAM_MCOPT1_DDR_TYPE_MASK   0x00100000 /* DDR Memory Type mask       */
+#define   SDRAM_MCOPT1_DDR1_TYPE     0x00000000 /* DDR1 Memory Type           */
+#define   SDRAM_MCOPT1_DDR2_TYPE     0x00100000 /* DDR2 Memory Type           */
+#define   SDRAM_MCOPT1_QDEP          0x00020000 /* 4 commands deep            */
+#define SDRAM_MCOPT1_RWOO_MASK       0x00008000 /* Out of Order Read mask     */
+#define   SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled                   */
+#define   SDRAM_MCOPT1_RWOO_ENABLED  0x00008000 /* enabled                    */
+#define SDRAM_MCOPT1_WOOO_MASK       0x00004000 /* Out of Order Write mask    */
+#define   SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled                   */
+#define   SDRAM_MCOPT1_WOOO_ENABLED  0x00004000 /* enabled                    */
+#define SDRAM_MCOPT1_DCOO_MASK       0x00002000 /* All Out of Order mask      */
+#define   SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled                   */
+#define   SDRAM_MCOPT1_DCOO_ENABLED  0x00000000 /* enabled                    */
+#define SDRAM_MCOPT1_DREF_MASK       0x00001000 /* Deferred refresh mask      */
+#define   SDRAM_MCOPT1_DREF_NORMAL   0x00000000 /* normal refresh             */
+#define   SDRAM_MCOPT1_DREF_DEFER_4  0x00001000 /* defer up to 4 refresh cmd  */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Options 2
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT2_SREN_MASK        0x80000000 /* Self Test mask            */
+#define   SDRAM_MCOPT2_SREN_EXIT      0x00000000 /* Self Test exit            */
+#define   SDRAM_MCOPT2_SREN_ENTER     0x80000000 /* Self Test enter           */
+#define SDRAM_MCOPT2_PMEN_MASK        0x40000000 /* Power Management mask     */
+#define   SDRAM_MCOPT2_PMEN_DISABLE   0x00000000 /* disable                   */
+#define   SDRAM_MCOPT2_PMEN_ENABLE    0x40000000 /* enable                    */
+#define SDRAM_MCOPT2_IPTR_MASK        0x20000000 /* Init Trigger Reg mask     */
+#define   SDRAM_MCOPT2_IPTR_IDLE      0x00000000 /* idle                      */
+#define   SDRAM_MCOPT2_IPTR_EXECUTE   0x20000000 /* execute preloaded init    */
+#define SDRAM_MCOPT2_XSRP_MASK        0x10000000 /* Exit Self Refresh Prevent */
+#define   SDRAM_MCOPT2_XSRP_ALLOW     0x00000000 /* allow self refresh exit   */
+#define   SDRAM_MCOPT2_XSRP_PREVENT   0x10000000 /* prevent self refresh exit */
+#define SDRAM_MCOPT2_DCEN_MASK        0x08000000 /* SDRAM Controller Enable   */
+#define   SDRAM_MCOPT2_DCEN_DISABLE   0x00000000 /* SDRAM Controller Enable   */
+#define   SDRAM_MCOPT2_DCEN_ENABLE    0x08000000 /* SDRAM Controller Enable   */
+#define SDRAM_MCOPT2_ISIE_MASK        0x04000000 /* Init Seq Interruptable mas*/
+#define   SDRAM_MCOPT2_ISIE_DISABLE   0x00000000 /* disable                   */
+#define   SDRAM_MCOPT2_ISIE_ENABLE    0x04000000 /* enable                    */
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Refresh Timer Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RTR_RINT_MASK       0xFFF80000
+#define   SDRAM_RTR_RINT_ENCODE(n)  ((((unsigned long)(n))&0xFFF8)<<16)
+#define   SDRAM_RTR_RINT_DECODE(n)  ((((unsigned long)(n))>>16)&0xFFF8)
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read DQS Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RQDC_RQDE_MASK        0x80000000
+#define   SDRAM_RQDC_RQDE_DISABLE   0x00000000
+#define   SDRAM_RQDC_RQDE_ENABLE    0x80000000
+#define SDRAM_RQDC_RQFD_MASK        0x000001FF
+#define   SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+
+#define SDRAM_RQDC_RQFD_MAX         0xFF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read Data Capture Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RDCC_RDSS_MASK        0xC0000000
+#define   SDRAM_RDCC_RDSS_T1        0x00000000
+#define   SDRAM_RDCC_RDSS_T2        0x40000000
+#define   SDRAM_RDCC_RDSS_T3        0x80000000
+#define   SDRAM_RDCC_RDSS_T4        0xC0000000
+#define SDRAM_RDCC_RSAE_MASK        0x00000001
+#define   SDRAM_RDCC_RSAE_DISABLE   0x00000001
+#define   SDRAM_RDCC_RSAE_ENABLE    0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read Feedback Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RFDC_ARSE_MASK        0x80000000
+#define   SDRAM_RFDC_ARSE_DISABLE   0x80000000
+#define   SDRAM_RFDC_ARSE_ENABLE    0x00000000
+#define SDRAM_RFDC_RFOS_MASK        0x007F0000
+#define   SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define SDRAM_RFDC_RFFD_MASK        0x000003FF
+#define   SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+
+#define SDRAM_RFDC_RFFD_MAX         0x4FF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Delay Line Calibration Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLCR_DCLM_MASK          0x80000000
+#define   SDRAM_DLCR_DCLM_MANUEL      0x80000000
+#define   SDRAM_DLCR_DCLM_AUTO        0x00000000
+#define SDRAM_DLCR_DLCR_MASK          0x08000000
+#define   SDRAM_DLCR_DLCR_CALIBRATE   0x08000000
+#define   SDRAM_DLCR_DLCR_IDLE        0x00000000
+#define SDRAM_DLCR_DLCS_MASK          0x07000000
+#define   SDRAM_DLCR_DLCS_NOT_RUN     0x00000000
+#define   SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
+#define   SDRAM_DLCR_DLCS_COMPLETE    0x02000000
+#define   SDRAM_DLCR_DLCS_CONT_DONE   0x03000000
+#define   SDRAM_DLCR_DLCS_ERROR       0x04000000
+#define SDRAM_DLCR_DLCV_MASK          0x000001FF
+#define   SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+#define   SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Controller On Die Termination Register
++-----------------------------------------------------------------------------*/
+#define   SDRAM_CODT_ODT_ON                   0x80000000
+#define   SDRAM_CODT_ODT_OFF                  0x00000000
+#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK       0x00000020
+#define   SDRAM_CODT_DQS_2_5_V_DDR1           0x00000000
+#define   SDRAM_CODT_DQS_1_8_V_DDR2           0x00000020
+#define SDRAM_CODT_DQS_MASK                   0x00000010
+#define   SDRAM_CODT_DQS_DIFFERENTIAL         0x00000000
+#define   SDRAM_CODT_DQS_SINGLE_END           0x00000010
+#define   SDRAM_CODT_CKSE_DIFFERENTIAL         	0x00000000
+#define   SDRAM_CODT_CKSE_SINGLE_END           	0x00000008
+#define   SDRAM_CODT_FEEBBACK_RCV_SINGLE_END  0x00000004
+#define   SDRAM_CODT_FEEBBACK_DRV_SINGLE_END  0x00000002
+#define   SDRAM_CODT_IO_HIZ  					0x00000000
+#define   SDRAM_CODT_IO_NMODE  					0x00000001
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MMODE_WR_MASK              0x00000E00
+#define   SDRAM_MMODE_WR_DDR1            0x00000000
+#define   SDRAM_MMODE_WR_DDR2_3_CYC      0x00000400
+#define   SDRAM_MMODE_WR_DDR2_4_CYC      0x00000600
+#define   SDRAM_MMODE_WR_DDR2_5_CYC      0x00000800
+#define   SDRAM_MMODE_WR_DDR2_6_CYC      0x00000A00
+#define SDRAM_MMODE_DCL_MASK             0x00000070
+#define   SDRAM_MMODE_DCL_DDR1_2_0_CLK   0x00000020
+#define   SDRAM_MMODE_DCL_DDR1_2_5_CLK   0x00000060
+#define   SDRAM_MMODE_DCL_DDR1_3_0_CLK   0x00000030
+#define   SDRAM_MMODE_DCL_DDR2_2_0_CLK   0x00000020
+#define   SDRAM_MMODE_DCL_DDR2_3_0_CLK   0x00000030
+#define   SDRAM_MMODE_DCL_DDR2_4_0_CLK   0x00000040
+#define   SDRAM_MMODE_DCL_DDR2_5_0_CLK   0x00000050
+#define   SDRAM_MMODE_DCL_DDR2_6_0_CLK   0x00000060
+#define   SDRAM_MMODE_DCL_DDR2_7_0_CLK   0x00000070
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Extended Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MEMODE_DIC_MASK            0x00000002
+#define   SDRAM_MEMODE_DIC_NORMAL        0x00000000
+#define   SDRAM_MEMODE_DIC_WEAK          0x00000002
+#define SDRAM_MEMODE_DLL_MASK            0x00000001
+#define   SDRAM_MEMODE_DLL_DISABLE       0x00000001
+#define   SDRAM_MEMODE_DLL_ENABLE        0x00000000
+#define SDRAM_MEMODE_RTT_MASK 		     0x00000044
+#define   SDRAM_MEMODE_RTT_DISABLED      0x00000000
+#define   SDRAM_MEMODE_RTT_75OHM         0x00000004
+#define   SDRAM_MEMODE_RTT_150OHM        0x00000040
+#define SDRAM_MEMODE_DQS_MASK            0x00000400
+#define   SDRAM_MEMODE_DQS_DISABLE       0x00000400
+#define   SDRAM_MEMODE_DQS_ENABLE        0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Clock Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CLKTR_CLKP_MASK            0xC0000000
+#define   SDRAM_CLKTR_CLKP_0_DEG         0x00000000
+#define   SDRAM_CLKTR_CLKP_180_DEG_ADV   0x80000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Write Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_WRDTR_WDTP_1_CYC		 0x80000000
+#define SDRAM_WRDTR_LLWP_MASK            0x10000000
+#define   SDRAM_WRDTR_LLWP_DIS           0x10000000
+#define   SDRAM_WRDTR_LLWP_1_CYC         0x00000000
+#define SDRAM_WRDTR_WTR_MASK             0x0E000000
+#define   SDRAM_WRDTR_WTR_0_DEG          0x06000000
+#define   SDRAM_WRDTR_WTR_180_DEG_ADV    0x02000000
+#define   SDRAM_WRDTR_WTR_270_DEG_ADV    0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR1 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR1_LDOF_MASK        0x80000000
+#define   SDRAM_SDTR1_LDOF_1_CLK     0x00000000
+#define   SDRAM_SDTR1_LDOF_2_CLK     0x80000000
+#define SDRAM_SDTR1_RTW_MASK         0x00F00000
+#define   SDRAM_SDTR1_RTW_2_CLK      0x00200000
+#define   SDRAM_SDTR1_RTW_3_CLK      0x00300000
+#define SDRAM_SDTR1_WTWO_MASK        0x000F0000
+#define   SDRAM_SDTR1_WTWO_0_CLK     0x00000000
+#define   SDRAM_SDTR1_WTWO_1_CLK     0x00010000
+#define SDRAM_SDTR1_RTRO_MASK        0x0000F000
+#define   SDRAM_SDTR1_RTRO_1_CLK     0x00000000
+#define   SDRAM_SDTR1_RTRO_2_CLK     0x00002000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR2 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR2_RCD_MASK         0xF0000000
+#define   SDRAM_SDTR2_RCD_1_CLK      0x10000000
+#define   SDRAM_SDTR2_RCD_2_CLK      0x20000000
+#define   SDRAM_SDTR2_RCD_3_CLK      0x30000000
+#define   SDRAM_SDTR2_RCD_4_CLK      0x40000000
+#define   SDRAM_SDTR2_RCD_5_CLK      0x50000000
+#define SDRAM_SDTR2_WTR_MASK         0x0F000000
+#define   SDRAM_SDTR2_WTR_1_CLK      0x01000000
+#define   SDRAM_SDTR2_WTR_2_CLK      0x02000000
+#define   SDRAM_SDTR2_WTR_3_CLK      0x03000000
+#define   SDRAM_SDTR2_WTR_4_CLK      0x04000000
+#define   SDRAM_SDTR3_WTR_ENCODE(n)  ((((unsigned long)(n))&0xF)<<24)
+#define SDRAM_SDTR2_XSNR_MASK        0x00FF0000
+#define   SDRAM_SDTR2_XSNR_8_CLK     0x00080000
+#define   SDRAM_SDTR2_XSNR_16_CLK    0x00100000
+#define   SDRAM_SDTR2_XSNR_32_CLK    0x00200000
+#define   SDRAM_SDTR2_XSNR_64_CLK    0x00400000
+#define SDRAM_SDTR2_WPC_MASK         0x0000F000
+#define   SDRAM_SDTR2_WPC_2_CLK      0x00002000
+#define   SDRAM_SDTR2_WPC_3_CLK      0x00003000
+#define   SDRAM_SDTR2_WPC_4_CLK      0x00004000
+#define   SDRAM_SDTR2_WPC_5_CLK      0x00005000
+#define   SDRAM_SDTR2_WPC_6_CLK      0x00006000
+#define   SDRAM_SDTR3_WPC_ENCODE(n)  ((((unsigned long)(n))&0xF)<<12)
+#define SDRAM_SDTR2_RPC_MASK         0x00000F00
+#define   SDRAM_SDTR2_RPC_2_CLK      0x00000200
+#define   SDRAM_SDTR2_RPC_3_CLK      0x00000300
+#define   SDRAM_SDTR2_RPC_4_CLK      0x00000400
+#define SDRAM_SDTR2_RP_MASK          0x000000F0
+#define   SDRAM_SDTR2_RP_3_CLK       0x00000030
+#define   SDRAM_SDTR2_RP_4_CLK       0x00000040
+#define   SDRAM_SDTR2_RP_5_CLK       0x00000050
+#define   SDRAM_SDTR2_RP_6_CLK       0x00000060
+#define   SDRAM_SDTR2_RP_7_CLK       0x00000070
+#define SDRAM_SDTR2_RRD_MASK         0x0000000F
+#define   SDRAM_SDTR2_RRD_2_CLK      0x00000002
+#define   SDRAM_SDTR2_RRD_3_CLK      0x00000003
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR3 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR3_RAS_MASK         0x1F000000
+#define   SDRAM_SDTR3_RAS_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
+#define SDRAM_SDTR3_RC_MASK          0x001F0000
+#define   SDRAM_SDTR3_RC_ENCODE(n)   ((((unsigned long)(n))&0x1F)<<16)
+#define SDRAM_SDTR3_XCS_MASK         0x00001F00
+#define SDRAM_SDTR3_XCS              0x00000D00
+#define SDRAM_SDTR3_RFC_MASK         0x0000003F
+#define   SDRAM_SDTR3_RFC_ENCODE(n)  ((((unsigned long)(n))&0x3F)<<0)
+
+/*-----------------------------------------------------------------------------+
+|  Memory Bank 0-1 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_BXCF_M_AM_MASK      0x00000F00      /* Addressing mode          */
+#define   SDRAM_BXCF_M_AM_0       0x00000000      /*   Mode 0                 */
+#define   SDRAM_BXCF_M_AM_1       0x00000100      /*   Mode 1                 */
+#define   SDRAM_BXCF_M_AM_2       0x00000200      /*   Mode 2                 */
+#define   SDRAM_BXCF_M_AM_3       0x00000300      /*   Mode 3                 */
+#define   SDRAM_BXCF_M_AM_4       0x00000400      /*   Mode 4                 */
+#define   SDRAM_BXCF_M_AM_5       0x00000500      /*   Mode 5                 */
+#define   SDRAM_BXCF_M_AM_6       0x00000600      /*   Mode 6                 */
+#define   SDRAM_BXCF_M_AM_7       0x00000700      /*   Mode 7                 */
+#define   SDRAM_BXCF_M_AM_8       0x00000800      /*   Mode 8                 */
+#define   SDRAM_BXCF_M_AM_9       0x00000900      /*   Mode 9                 */
+#define SDRAM_BXCF_M_BE_MASK      0x00000001      /* Memory Bank Enable       */
+#define   SDRAM_BXCF_M_BE_DISABLE 0x00000000      /* Memory Bank Enable       */
+#define   SDRAM_BXCF_M_BE_ENABLE  0x00000001      /* Memory Bank Enable       */
+
+#define sdr_uart0	0x0120	/* UART0 Config */
+#define sdr_uart1	0x0121	/* UART1 Config */
+#define sdr_mfr		0x4300	/* SDR0_MFR reg */
+
+/* Defines for CPC0_EPRCSR register */
+#define CPC0_EPRCSR_E0NFE          0x80000000
+#define CPC0_EPRCSR_E1NFE          0x40000000
+#define CPC0_EPRCSR_E1RPP          0x00000080
+#define CPC0_EPRCSR_E0RPP          0x00000040
+#define CPC0_EPRCSR_E1ERP          0x00000020
+#define CPC0_EPRCSR_E0ERP          0x00000010
+#define CPC0_EPRCSR_E1PCI          0x00000002
+#define CPC0_EPRCSR_E0PCI          0x00000001
+
+#define cpr0_clkupd	0x020
+#define cpr0_pllc	0x040
+#define cpr0_plld	0x060
+#define cpr0_cpud	0x080
+#define cpr0_plbd	0x0a0
+#define cpr0_opbd	0x0c0
+#define cpr0_perd	0x0e0
+#define cpr0_ahbd	0x100
+#define cpr0_icfg	0x140
+
+#define SDR_PINSTP	0x0040
+#define sdr_sdcs	0x0060
+
+#define SDR0_SDCS_SDD			(0x80000000 >> 31)
+
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0                   0x4000
+#define   SDR0_CUST0_MUX_E_N_G_MASK   0xC0000000     /* Mux_Emac_NDFC_GPIO */
+#define   SDR0_CUST0_MUX_EMAC_SEL     0x40000000       /* Emac Selection */
+#define   SDR0_CUST0_MUX_NDFC_SEL     0x80000000       /* NDFC Selection */
+#define   SDR0_CUST0_MUX_GPIO_SEL     0xC0000000       /* GPIO Selection */
+
+#define   SDR0_CUST0_NDFC_EN_MASK     0x20000000     /* NDFC Enable Mask */
+#define   SDR0_CUST0_NDFC_ENABLE      0x20000000       /* NDFC Enable */
+#define   SDR0_CUST0_NDFC_DISABLE     0x00000000       /* NDFC Disable */
+
+#define   SDR0_CUST0_NDFC_BW_MASK     0x10000000     /* NDFC Boot Width */
+#define   SDR0_CUST0_NDFC_BW_16_BIT   0x10000000       /* NDFC Boot Width = 16 Bit */
+#define   SDR0_CUST0_NDFC_BW_8_BIT    0x00000000       /* NDFC Boot Width =  8 Bit */
+
+#define   SDR0_CUST0_NDFC_BP_MASK     0x0F000000     /* NDFC Boot Page */
+#define   SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
+#define   SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
+
+#define   SDR0_CUST0_NDFC_BAC_MASK    0x00C00000     /* NDFC Boot Address Cycle */
+#define   SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
+#define   SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
+
+#define   SDR0_CUST0_NDFC_ARE_MASK    0x00200000     /* NDFC Auto Read Enable */
+#define   SDR0_CUST0_NDFC_ARE_ENABLE  0x00200000       /* NDFC Auto Read Enable */
+#define   SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000       /* NDFC Auto Read Disable */
+
+#define   SDR0_CUST0_NRB_MASK         0x00100000     /* NDFC Ready / Busy */
+#define   SDR0_CUST0_NRB_BUSY         0x00100000       /* Busy */
+#define   SDR0_CUST0_NRB_READY        0x00000000       /* Ready */
+
+#define   SDR0_CUST0_NDRSC_MASK       0x0000FFF0     /* NDFC Device Reset Count Mask */
+#define   SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
+#define   SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
+
+#define   SDR0_CUST0_CHIPSELGAT_MASK  0x0000000F     /* Chip Select Gating Mask */
+#define   SDR0_CUST0_CHIPSELGAT_DIS   0x00000000       /* Chip Select Gating Disable */
+#define   SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F       /* All Chip Select Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN0   0x00000008       /* Chip Select0 Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN1   0x00000004       /* Chip Select1 Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN2   0x00000002       /* Chip Select2 Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN3   0x00000001       /* Chip Select3 Gating Enable */
+
+#define SDR0_PFC0		0x4100
+#define SDR0_PFC1		0x4101
+#define SDR0_PFC1_U1ME		0x02000000
+#define SDR0_PFC1_U0ME		0x00080000
+#define SDR0_PFC1_U0IM		0x00040000
+#define SDR0_PFC1_SIS		0x00020000
+#define SDR0_PFC1_DMAAEN	0x00010000
+#define SDR0_PFC1_DMADEN	0x00008000
+#define SDR0_PFC1_USBEN		0x00004000
+#define SDR0_PFC1_AHBSWAP	0x00000020
+#define SDR0_PFC1_USBBIGEN	0x00000010
+#define SDR0_PFC1_GPT_FREQ	0x0000000f
+#endif
 
 #endif	/* __PPC405_H__ */
diff --git a/include/ppc440.h b/include/ppc440.h
index 38809f34b..90e56b098 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -19,9 +19,35 @@
 |	LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
 +----------------------------------------------------------------------------*/
 
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #ifndef __PPC440_H__
 #define __PPC440_H__
 
+#define CFG_DCACHE_SIZE		(32 << 10)	/* For AMCC 440 CPUs	*/
+
 /*--------------------------------------------------------------------- */
 /* Special Purpose Registers						*/
 /*--------------------------------------------------------------------- */
@@ -123,10 +149,6 @@
 /*-----------------------------------------------------------------------------
  | Clocking Controller
  +----------------------------------------------------------------------------*/
-#define CLOCKING_DCR_BASE 0x0c
-#define clkcfga	 (CLOCKING_DCR_BASE+0x0)
-#define clkcfgd	 (CLOCKING_DCR_BASE+0x1)
-
 /* values for clkcfga register - indirect addressing of these regs */
 #define clk_clkukpd	0x0020
 #define clk_pllc	0x0040
@@ -140,9 +162,6 @@
 #define clk_icfg	0x0140
 
 /* 440gx sdr register definations */
-#define SDR_DCR_BASE	0x0e
-#define sdrcfga		(SDR_DCR_BASE+0x0)
-#define sdrcfgd		(SDR_DCR_BASE+0x1)
 #define sdr_sdstp0	0x0020	    /* */
 #define sdr_sdstp1	0x0021	    /* */
 #define SDR_PINSTP	0x0040
@@ -191,61 +210,9 @@
 #define sdr_plbtr	0x4200
 #define sdr_mfr		0x4300	/* SDR0_MFR reg */
 
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */
-#define DDR0_00	0x00
-#define DDR0_01	0x01
-#define DDR0_02	0x02
-#define DDR0_03	0x03
-#define DDR0_04	0x04
-#define DDR0_05	0x05
-#define DDR0_06	0x06
-#define DDR0_07	0x07
-#define DDR0_08	0x08
-#define DDR0_09	0x09
-#define DDR0_10	0x0A
-#define DDR0_11	0x0B
-#define DDR0_12	0x0C
-#define DDR0_13	0x0D
-#define DDR0_14	0x0E
-#define DDR0_15	0x0F
-#define DDR0_16	0x10
-#define DDR0_17	0x11
-#define DDR0_18	0x12
-#define DDR0_19	0x13
-#define DDR0_20	0x14
-#define DDR0_21	0x15
-#define DDR0_22	0x16
-#define DDR0_23	0x17
-#define DDR0_24	0x18
-#define DDR0_25	0x19
-#define DDR0_26	0x1A
-#define DDR0_27	0x1B
-#define DDR0_28	0x1C
-#define DDR0_29	0x1D
-#define DDR0_30	0x1E
-#define DDR0_31	0x1F
-#define DDR0_32	0x20
-#define DDR0_33	0x21
-#define DDR0_34	0x22
-#define DDR0_35	0x23
-#define DDR0_36	0x24
-#define DDR0_37	0x25
-#define DDR0_38	0x26
-#define DDR0_39	0x27
-#define DDR0_40	0x28
-#define DDR0_41	0x29
-#define DDR0_42	0x2A
-#define DDR0_43	0x2B
-#define DDR0_44	0x2C
-#endif /*CONFIG_440EPX*/
-
 /*-----------------------------------------------------------------------------
  | SDRAM Controller
  +----------------------------------------------------------------------------*/
-#define SDRAM_DCR_BASE 0x10
-#define memcfga	 (SDRAM_DCR_BASE+0x0)	/* Memory configuration address reg */
-#define memcfgd	 (SDRAM_DCR_BASE+0x1)	/* Memory configuration data reg    */
-
 /* values for memcfga register - indirect addressing of these regs	    */
 #define mem_besr0_clr	0x0000	/* bus error status reg 0 (clr)		    */
 #define mem_besr0_set	0x0004	/* bus error status reg 0 (set)		    */
@@ -331,9 +298,6 @@
 #define sdr_sdstp6	0x4005
 #define sdr_sdstp7	0x4007
 
-#define SDR0_CFGADDR		0x00E
-#define SDR0_CFGDATA		0x00F
-
 /******************************************************************************
  * PCI express defines
  ******************************************************************************/
@@ -480,10 +444,6 @@
 /*----------------------------------------------------------------------------+
 | Memory controller defines
 +----------------------------------------------------------------------------*/
-#define SDRAMC_DCR_BASE	0x010
-#define SDRAMC_CFGADDR	(SDRAMC_DCR_BASE+0x0)   /* Memory configuration add  */
-#define SDRAMC_CFGDATA	(SDRAMC_DCR_BASE+0x1)   /* Memory configuration data */
-
 /* A REVOIR versus specs 4 bank  - SG*/
 #define SDRAM_MCSTAT	0x14	/* memory controller status                  */
 #define SDRAM_MCOPT1	0x20	/* memory controller options 1               */
@@ -829,14 +789,455 @@
 #define SDRAM_BXCF_M_BE_MASK		0x00000001	/* Memory Bank Enable	*/
 #define SDRAM_BXCF_M_BE_DISABLE		0x00000000	/* Memory Bank Enable	*/
 #define SDRAM_BXCF_M_BE_ENABLE		0x00000001	/* Memory Bank Enable	*/
+
+#define SDR0_MFR_FIXD			0x10000000	/* Workaround for PCI/DMA */
 #endif /* CONFIG_440SPE */
 
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+/*-----------------------------------------------------------------------------
+ | SDRAM Controller
+ +----------------------------------------------------------------------------*/
+#define DDR0_00				0x00
+#define DDR0_00_INT_ACK_MASK              0x7F000000	/* Write only */
+#define DDR0_00_INT_ACK_ALL               0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n)           ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n)           ((((unsigned long)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK           0x00FF0000	/* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0           0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1           0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2           0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3           0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4           0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5           0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6           0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7           0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK        0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK      0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_01				0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK     0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n)  ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK     0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n)  ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK    0x00000700	/* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n)               ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n)               ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK             0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON           0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF          0x00000000
+
+#define DDR0_02				0x02
+#define DDR0_02_MAX_CS_REG_MASK           0x02000000	/* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n)        ((((unsigned long)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n)        ((((unsigned long)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK          0x000F0000	/* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n)       ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK          0x00000F00	/* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n)       ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_02_START_MASK                0x00000001
+#define DDR0_02_START_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+#define DDR0_02_START_OFF                 0x00000000
+#define DDR0_02_START_ON                  0x00000001
+
+#define DDR0_03				0x03
+#define DDR0_03_BSTLEN_MASK               0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n)            ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n)            ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK               0x00070000
+#define DDR0_03_CASLAT_ENCODE(n)            ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK           0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n)        ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n)        ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK             0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n)          ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n)          ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_04				0x04
+#define DDR0_04_TRC_MASK                  0x1F000000
+#define DDR0_04_TRC_ENCODE(n)               ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n)               ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK                 0x00070000
+#define DDR0_04_TRRD_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK                 0x00000700
+#define DDR0_04_TRTP_ENCODE(n)              ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n)              ((((unsigned long)(n))>>8)&0x7)
+
+#define DDR0_05				0x05
+#define DDR0_05_TMRD_MASK                 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n)              ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK                0x00070000
+#define DDR0_05_TEMRS_ENCODE(n)             ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n)             ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK                  0x00000F00
+#define DDR0_05_TRP_ENCODE(n)               ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n)               ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK             0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+
+#define DDR0_06				0x06
+#define DDR0_06_WRITEINTERP_MASK          0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK                 0x00070000
+#define DDR0_06_TWTR_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK                 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK                 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n)              ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n)              ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_07				0x07
+#define DDR0_07_NO_CMD_INIT_MASK          0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK                 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n)              ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK    0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK             0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n)          ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_08				0x08
+#define DDR0_08_WRLAT_MASK                0x07000000
+#define DDR0_08_WRLAT_ENCODE(n)             ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n)             ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK                 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n)              ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK             0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n)          ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n)          ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK     0x00000001
+#define DDR0_08_DDRII_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_09				0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK  0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK                0x00030000
+#define DDR0_09_RTT_0_ENCODE(n)             ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n)             ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK  0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK         0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n)      ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n)      ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_10				0x0A
+#define DDR0_10_WRITE_MODEREG_MASK        0x00010000	/* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n)     ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n)     ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK               0x00000300
+#define DDR0_10_CS_MAP_NO_MEM             0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED    0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED    0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n)            ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n)            ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK  0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
+
+#define DDR0_11				0x0B
+#define DDR0_11_SREFRESH_MASK             0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n)          ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK                0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n)             ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n)             ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK                 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+
+#define DDR0_12				0x0C
+#define DDR0_12_TCKE_MASK                 0x0000007
+#define DDR0_12_TCKE_ENCODE(n)              ((((unsigned long)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n)              ((((unsigned long)(n))>>0)&0x7)
+
+#define DDR0_14				0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK      0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n)   ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK                0x00010000
+#define DDR0_14_REDUC_64BITS              0x00000000
+#define DDR0_14_REDUC_32BITS              0x00010000
+#define DDR0_14_REDUC_ENCODE(n)             ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n)             ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK      0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n)   ((((unsigned long)(n))>>8)&0x1)
+
+#define DDR0_17				0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK      0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK           0x00010000	/* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED         0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED       0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n)        ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n)        ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK             0x00007F00	/* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n)          ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n)          ((((unsigned long)(n))>>8)&0x7F)
+
+#define DDR0_18				0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK      0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK      0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK      0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK      0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_19				0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK      0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK      0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK      0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK      0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_20				0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK      0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK      0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK      0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK      0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_21				0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK      0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK      0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK      0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK      0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_22				0x16
+#define DDR0_22_CTRL_RAW_MASK             0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE      0x00000000	/* ECC not being used */
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY   0x01000000	/* ECC checking is on, but no attempts to correct */
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM       0x02000000	/* No ECC RAM storage available */
+#define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000	/* ECC checking and correcting on */
+#define DDR0_22_CTRL_RAW_ENCODE(n)          ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n)          ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK        0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK     0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n)  ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n)  ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_23				0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK       0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n)   ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n)   ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK           0x00FF0000	/* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK           0x0000FF00	/* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n)        ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK                  0x00000001	/* Write only */
+#define DDR0_23_FWC_ENCODE(n)               ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_24				0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK  0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK       0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK       0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK       0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n)    ((((unsigned long)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n)    ((((unsigned long)(n))>>0)&0x3)
+
+#define DDR0_25				0x19
+#define DDR0_25_VERSION_MASK              0xFFFF0000	/* Read only */
+#define DDR0_25_VERSION_ENCODE(n)           ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n)           ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK  0x000003FF	/* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_26				0x1A
+#define DDR0_26_TRAS_MAX_MASK             0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK                 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_27				0x1B
+#define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n)         ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n)         ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK                0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n)             ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n)             ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_28				0x1C
+#define DDR0_28_EMRS3_DATA_MASK           0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n)        ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK           0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_31				0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK       0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n)    ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n)    ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_32				0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK    0xFFFFFFFF	/* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33				0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK    0x00000001	/* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_34				0x22
+#define DDR0_34_ECC_U_ADDR_MASK           0xFFFFFFFF	/* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35				0x23
+#define DDR0_35_ECC_U_ADDR_MASK           0x00000001	/* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_36				0x24
+#define DDR0_36_ECC_U_DATA_MASK           0xFFFFFFFF	/* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37				0x25
+#define DDR0_37_ECC_U_DATA_MASK           0xFFFFFFFF	/* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38				0x26
+#define DDR0_38_ECC_C_ADDR_MASK           0xFFFFFFFF	/* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39				0x27
+#define DDR0_39_ECC_C_ADDR_MASK           0x00000001	/* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_40				0x28
+#define DDR0_40_ECC_C_DATA_MASK           0xFFFFFFFF	/* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41				0x29
+#define DDR0_41_ECC_C_DATA_MASK           0xFFFFFFFF	/* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42				0x2A
+#define DDR0_42_ADDR_PINS_MASK            0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n)         ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n)         ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK      0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n)   ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n)   ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_43				0x2B
+#define DDR0_43_TWR_MASK                  0x07000000
+#define DDR0_43_TWR_ENCODE(n)               ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n)               ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK              0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n)           ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n)           ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK          0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n)       ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n)       ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK      0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS     0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS     0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n)   ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_44				0x2C
+#define DDR0_44_TRCD_MASK                 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n)              ((((unsigned long)(n))>>0)&0xFF)
+
+#endif /* CONFIG_440EPX */
+
 /*-----------------------------------------------------------------------------
  | External Bus Controller
  +----------------------------------------------------------------------------*/
-#define EBC_DCR_BASE 0x12
-#define ebccfga (EBC_DCR_BASE+0x0)   /* External bus controller addr reg     */
-#define ebccfgd (EBC_DCR_BASE+0x1)   /* External bus controller data reg     */
 /* values for ebccfga register - indirect addressing of these regs */
 #define pb0cr		0x00	/* periph bank 0 config reg		*/
 #define pb1cr		0x01	/* periph bank 1 config reg		*/
@@ -2207,9 +2608,6 @@
 #define SDR0_CP440_NTO1_NTO1		0x00000002
 #define SDR0_CP440_NTO1_ENCODE(n)	((((unsigned long)(n))&0x01)<<1)
 #define SDR0_CP440_NTO1_DECODE(n)	((((unsigned long)(n))>>1)&0x01)
-#define SDR0_CFGADDR			0x00E	/*already defined line 277 */
-#define SDR0_CFGDATA			0x00F
-
 
 #define SDR0_SDSTP0			0x0020
 #define SDR0_SDSTP0_ENG_MASK		0x80000000
@@ -3209,9 +3607,6 @@
 /******************************************************************************
  * GPIO macro register defines
  ******************************************************************************/
-#define GPIO0			0
-#define GPIO1			1
-
 #if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000700)
@@ -3227,31 +3622,6 @@
 #define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000B00)
 #define GPIO1_BASE             (CFG_PERIPHERAL_BASE+0x00000C00)
 
-/* Offsets */
-#define GPIOx_OR    0x00	/* GPIO Output Register */
-#define GPIOx_TCR   0x04	/* GPIO Three-State Control Register */
-#define GPIOx_OSL   0x08	/* GPIO Output Select Register (Bits 0-31) */
-#define GPIOx_OSH   0x0C	/* GPIO Ouput Select Register (Bits 32-63) */
-#define GPIOx_TSL   0x10	/* GPIO Three-State Select Register (Bits 0-31) */
-#define GPIOx_TSH   0x14	/* GPIO Three-State Select Register  (Bits 32-63) */
-#define GPIOx_ODR   0x18	/* GPIO Open drain Register */
-#define GPIOx_IR    0x1C	/* GPIO Input Register */
-#define GPIOx_RR1   0x20	/* GPIO Receive Register 1 */
-#define GPIOx_RR2   0x24	/* GPIO Receive Register 2 */
-#define GPIOx_RR3   0x28	/* GPIO Receive Register 3 */
-#define GPIOx_IS1L  0x30	/* GPIO Input Select Register 1 (Bits 0-31) */
-#define GPIOx_IS1H  0x34	/* GPIO Input Select Register 1 (Bits 32-63) */
-#define GPIOx_IS2L  0x38	/* GPIO Input Select Register 2 (Bits 0-31) */
-#define GPIOx_IS2H  0x3C	/* GPIO Input Select Register 2 (Bits 32-63) */
-#define GPIOx_IS3L  0x40	/* GPIO Input Select Register 3 (Bits 0-31) */
-#define GPIOx_IS3H  0x44	/* GPIO Input Select Register 3 (Bits 32-63) */
-
-#define GPIO_OS(x)	(x+GPIOx_OSL)	/* GPIO Output Register High or Low */
-#define GPIO_TS(x)	(x+GPIOx_TSL)	/* GPIO Three-state Control Reg High or Low */
-#define GPIO_IS1(x)	(x+GPIOx_IS1L)	/* GPIO Input register1 High or Low */
-#define GPIO_IS2(x)	(x+GPIOx_IS2L)	/* GPIO Input register2 High or Low */
-#define GPIO_IS3(x)	(x+GPIOx_IS3L)	/* GPIO Input register3 High or Low */
-
 #define GPIO0_OR               (GPIO0_BASE+0x0)
 #define GPIO0_TCR              (GPIO0_BASE+0x4)
 #define GPIO0_OSRL             (GPIO0_BASE+0x8)
@@ -3289,71 +3659,8 @@
 #define GPIO1_ISR3H            (GPIO1_BASE+0x44)
 #endif
 
-/*
- * Macros for accessing the indirect EBC registers
- */
-#define mtebc(reg, data)	do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); } while (0)
-#define mfebc(reg, data)	do { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); } while (0)
-
-/*
- * Macros for accessing the indirect SDRAM controller registers
- */
-#define mtsdram(reg, data)	do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
-#define mfsdram(reg, data)	do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
-
-/*
- * Macros for accessing the indirect clocking controller registers
- */
-#define mtclk(reg, data)	do { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); } while (0)
-#define mfclk(reg, data)	do { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); } while (0)
-
-/*
- * Macros for accessing the sdr controller registers
- */
-#define mtsdr(reg, data)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
-#define mfsdr(reg, data)	do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
-
-/*
- * All 44x except 440GP have CPR registers (indirect DCR)
- */
-#if !defined(CONFIG_440GP)
-#define CPR0_CFGADDR		0x00C
-#define CPR0_CFGDATA		0x00D
-
-#define mtcpr(reg, data)	do { \
-		mtdcr(CPR0_CFGADDR, reg); \
-		mtdcr(CPR0_CFGDATA, data); \
-	} while (0)
-
-#define mfcpr(reg, data)	do { \
-		mtdcr(CPR0_CFGADDR, reg); \
-		data = mfdcr(CPR0_CFGDATA); \
-	} while (0)
-#endif
-
 #ifndef __ASSEMBLY__
 
-typedef struct {
-	unsigned long pllFwdDivA;
-	unsigned long pllFwdDivB;
-	unsigned long pllFbkDiv;
-	unsigned long pllOpbDiv;
-	unsigned long pllPciDiv;
-	unsigned long pllExtBusDiv;
-	unsigned long freqVCOMhz;	/* in MHz			   */
-	unsigned long freqProcessor;
-	unsigned long freqTmrClk;
-	unsigned long freqPLB;
-	unsigned long freqOPB;
-	unsigned long freqEPB;
-	unsigned long freqPCI;
-#ifdef CONFIG_440SPE
-	unsigned long freqDDR;
-#endif
-	unsigned long pciIntArbEn;            /* Internal PCI arbiter is enabled */
-	unsigned long pciClkSync;             /* PCI clock is synchronous        */
-} PPC440_SYS_INFO;
-
 static inline u32 get_mcsr(void)
 {
 	u32 val;
@@ -3369,8 +3676,4 @@ static inline void set_mcsr(u32 val)
 
 #endif	/* _ASMLANGUAGE */
 
-#define RESET_VECTOR		0xfffffffc
-#define CACHELINE_MASK		(CFG_CACHELINE_SIZE - 1) /* Address mask for		*/
-							 /* cache line aligned data.	*/
-
 #endif	/* __PPC440_H__ */
diff --git a/include/ppc4xx.h b/include/ppc4xx.h
index ca241d2c1..76fe8727f 100644
--- a/include/ppc4xx.h
+++ b/include/ppc4xx.h
@@ -22,13 +22,80 @@
 #ifndef	__PPC4XX_H__
 #define __PPC4XX_H__
 
-#define EXC_OFF_SYS_RESET	0x0100	/* System reset				*/
-#define _START_OFFSET		(EXC_OFF_SYS_RESET + 0x2000)
-
 #if defined(CONFIG_440)
 #include <ppc440.h>
 #else
 #include <ppc405.h>
 #endif
 
+/*
+ * Common stuff for 4xx (405 and 440)
+ */
+
+#define EXC_OFF_SYS_RESET	0x0100	/* System reset				*/
+#define _START_OFFSET		(EXC_OFF_SYS_RESET + 0x2000)
+
+#define RESET_VECTOR	0xfffffffc
+#define CACHELINE_MASK	(CFG_CACHELINE_SIZE - 1) /* Address mask for cache
+						     line aligned data. */
+
+#define CPR0_DCR_BASE	0x0C
+#define cprcfga		(CPR0_DCR_BASE+0x0)
+#define cprcfgd		(CPR0_DCR_BASE+0x1)
+
+#define SDR_DCR_BASE	0x0E
+#define sdrcfga		(SDR_DCR_BASE+0x0)
+#define sdrcfgd		(SDR_DCR_BASE+0x1)
+
+#define SDRAM_DCR_BASE	0x10
+#define memcfga		(SDRAM_DCR_BASE+0x0)
+#define memcfgd		(SDRAM_DCR_BASE+0x1)
+
+#define EBC_DCR_BASE	0x12
+#define ebccfga		(EBC_DCR_BASE+0x0)
+#define ebccfgd		(EBC_DCR_BASE+0x1)
+
+/*
+ * Macros for indirect DCR access
+ */
+#define mtcpr(reg, d)	do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,d); } while (0)
+#define mfcpr(reg, d)	do { mtdcr(cprcfga,reg);d = mfdcr(cprcfgd); } while (0)
+
+#define mtebc(reg, d)	do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,d); } while (0)
+#define mfebc(reg, d)	do { mtdcr(ebccfga,reg);d = mfdcr(ebccfgd); } while (0)
+
+#define mtsdram(reg, d)	do { mtdcr(memcfga,reg);mtdcr(memcfgd,d); } while (0)
+#define mfsdram(reg, d)	do { mtdcr(memcfga,reg);d = mfdcr(memcfgd); } while (0)
+
+#define mtsdr(reg, d)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,d); } while (0)
+#define mfsdr(reg, d)	do { mtdcr(sdrcfga,reg);d = mfdcr(sdrcfgd); } while (0)
+
+#ifndef __ASSEMBLY__
+
+typedef struct
+{
+	unsigned long freqDDR;
+	unsigned long freqEBC;
+	unsigned long freqOPB;
+	unsigned long freqPCI;
+	unsigned long freqPLB;
+	unsigned long freqTmrClk;
+	unsigned long freqUART;
+	unsigned long freqProcessor;
+	unsigned long freqVCOHz;
+	unsigned long freqVCOMhz;	/* in MHz                          */
+	unsigned long pciClkSync;	/* PCI clock is synchronous        */
+	unsigned long pciIntArbEn;	/* Internal PCI arbiter is enabled */
+	unsigned long pllExtBusDiv;
+	unsigned long pllFbkDiv;
+	unsigned long pllFwdDiv;
+	unsigned long pllFwdDivA;
+	unsigned long pllFwdDivB;
+	unsigned long pllOpbDiv;
+	unsigned long pllPciDiv;
+	unsigned long pllPlbDiv;
+} PPC4xx_SYS_INFO;
+
+#endif	/* __ASSEMBLY__ */
+
 #endif	/* __PPC4XX_H__ */
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index 3d8ca0906..f28550073 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -102,6 +102,8 @@ typedef struct emac_4xx_hw_st {
     uint32_t		emac_ier;
     volatile mal_desc_t *tx;
     volatile mal_desc_t *rx;
+    u32			tx_phys;
+    u32			rx_phys;
     bd_t		*bis;	/* for eth_init upon mal error */
     mal_desc_t		*alloc_tx_buf;
     mal_desc_t		*alloc_rx_buf;
@@ -146,11 +148,12 @@ typedef struct emac_4xx_hw_st {
 #endif
 
 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define SDR0_PFC1_EM_1000	(0x00200000)
 #endif
 
-/*ZMII Bridge Register addresses */
+/* ZMII Bridge Register addresses */
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0D00)
@@ -202,6 +205,8 @@ typedef struct emac_4xx_hw_st {
 /* RGMII Register Addresses */
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x1000)
+#elif defined(CONFIG_405EX)
+#define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0xB00)
 #else
 #define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x0790)
 #endif
@@ -223,7 +228,8 @@ typedef struct emac_4xx_hw_st {
 #define RGMII_SSR_SP_100MBPS	(0x02)
 #define RGMII_SSR_SP_1000MBPS	(0x04)
 
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define RGMII_SSR_V(__x)	((__x) * 8)
 #else
 #define RGMII_SSR_V(__x)	((__x -2) * 8)
@@ -304,7 +310,7 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0800)
 #endif
 #else
-#if defined(CONFIG_405EZ)
+#if defined(CONFIG_405EZ) || defined(CONFIG_405EX)
 #define EMAC_BASE 		0xEF600900
 #else
 #define EMAC_BASE 		0xEF600800
@@ -338,7 +344,8 @@ typedef struct emac_4xx_hw_st {
 /* on 440GX EMAC_MR1 has a different layout! */
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 /* MODE Reg 1 */
 #define EMAC_M1_FDE		(0x80000000)
 #define EMAC_M1_ILE		(0x40000000)
diff --git a/include/serial.h b/include/serial.h
index 30bfde308..e292f0cd9 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -22,8 +22,9 @@ extern struct serial_device serial_smc_device;
 extern struct serial_device serial_scc_device;
 extern struct serial_device * default_serial_console (void);
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
-   || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
+    defined(CONFIG_MPC5xxx)
 extern struct serial_device serial0_device;
 extern struct serial_device serial1_device;
 #if defined(CFG_NS16550_SERIAL)
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 7e97f1347..6f35aa06b 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -46,10 +46,10 @@
 #include <net.h>
 
 #ifdef CONFIG_DRIVER_SMC91111
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 #endif
 #ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/lan91c96.h"
+#include "../drivers/net/lan91c96.h"
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 11d864fea..809ee3be9 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -311,6 +311,8 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	dma_alloc_init();
 	board_init_info();
 
+	enable_interrupts();
+
 	bd->bi_flashstart = 0;
 	bd->bi_flashsize = 0;
 	bd->bi_flashoffset = 0;
diff --git a/lib_avr32/interrupts.c b/lib_avr32/interrupts.c
index ce538f3d9..28df20db0 100644
--- a/lib_avr32/interrupts.c
+++ b/lib_avr32/interrupts.c
@@ -35,5 +35,5 @@ int disable_interrupts(void)
 	sr = sysreg_read(SR);
 	asm volatile("ssrf	%0" : : "n"(SYSREG_GM_OFFSET));
 
-	return SYSREG_BFEXT(GM, sr);
+	return !SYSREG_BFEXT(GM, sr);
 }
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 7c9990f8e..86a3b67c9 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -35,7 +35,7 @@
 #include <i2c.h>
 #include "blackfin_board.h"
 #include <asm/cplb.h>
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 
 #if defined(CONFIG_BF537)&&defined(CONFIG_POST)
 #include <post.h>
diff --git a/lib_generic/Makefile b/lib_generic/Makefile
index bf377529c..9713353dd 100644
--- a/lib_generic/Makefile
+++ b/lib_generic/Makefile
@@ -25,11 +25,22 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)libgeneric.a
 
-COBJS	= bzlib.o bzlib_crctable.o bzlib_decompress.o \
-	  bzlib_randtable.o bzlib_huffman.o \
-	  crc32.o ctype.o display_options.o div64.o ldiv.o sha1.o \
-	  string.o vsprintf.o zlib.o
-
+COBJS-y += bzlib.o
+COBJS-y += bzlib_crctable.o
+COBJS-y += bzlib_decompress.o
+COBJS-y += bzlib_randtable.o
+COBJS-y += bzlib_huffman.o
+COBJS-y += crc32.o
+COBJS-y += ctype.o
+COBJS-y += display_options.o
+COBJS-y += div64.o
+COBJS-y += ldiv.o
+COBJS-y += sha1.o
+COBJS-y += string.o
+COBJS-y += vsprintf.o
+COBJS-y += zlib.o
+
+COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 91ccec04d..c1a0acf46 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -62,6 +62,11 @@ static ulong mem_malloc_start;
 static ulong mem_malloc_end;
 static ulong mem_malloc_brk;
 
+/*
+ * mips_io_port_base is the begin of the address space to which x86 style
+ * I/O ports are mapped.
+ */
+unsigned long mips_io_port_base = -1;
 
 /*
  * The Malloc area is immediately below the monitor copy in DRAM
diff --git a/lib_ppc/cache.c b/lib_ppc/cache.c
index a81ab5e36..27e1a823c 100644
--- a/lib_ppc/cache.c
+++ b/lib_ppc/cache.c
@@ -22,7 +22,7 @@
  */
 
 #include <common.h>
-
+#include <asm/cache.h>
 
 void flush_cache (ulong start_addr, ulong size)
 {
diff --git a/lib_sh/Makefile b/lib_sh/Makefile
new file mode 100644
index 000000000..cf127a826
--- /dev/null
+++ b/lib_sh/Makefile
@@ -0,0 +1,42 @@
+#
+# Copyright (c) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(ARCH).a
+
+SOBJS	=
+
+COBJS	= board.o sh_linux.o # time.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/lib_sh/board.c b/lib_sh/board.c
new file mode 100644
index 000000000..2cd60d76b
--- /dev/null
+++ b/lib_sh/board.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <version.h>
+#include <net.h>
+#include <environment.h>
+
+extern void malloc_bin_reloc (void);
+extern int cpu_init(void);
+extern int board_init(void);
+extern int dram_init(void);
+extern int watchdog_init(void);
+extern int timer_init(void);
+
+const char version_string[] = U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+
+unsigned long monitor_flash_len = CFG_MONITOR_LEN;
+
+static unsigned long mem_malloc_start;
+static unsigned long mem_malloc_end;
+static unsigned long mem_malloc_brk;
+
+static void mem_malloc_init (void)
+{
+
+	mem_malloc_start = (TEXT_BASE - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN);
+	mem_malloc_end = (mem_malloc_start + CFG_MALLOC_LEN - 16);
+	mem_malloc_brk = mem_malloc_start;
+	memset ((void *) mem_malloc_start, 0,
+		(mem_malloc_end - mem_malloc_start));
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+	unsigned long old = mem_malloc_brk;
+	unsigned long new = old + increment;
+
+	if ((new < mem_malloc_start) ||
+	    (new > mem_malloc_end)) {
+		return NULL;
+	}
+
+	mem_malloc_brk = new;
+	return (void *) old;
+}
+
+static int sh_flash_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_flashsize = flash_init();
+	printf("FLASH: %dMB\n", gd->bd->bi_flashsize / (1024*1024));
+
+	return 0;
+}
+
+#if defined(CONFIG_CMD_NAND)
+void nand_init (void);
+static int sh_nand_init(void)
+{
+	printf("NAND: ");
+	nand_init();	/* go init the NAND */
+	return 0;
+}
+#endif /* CONFIG_CMD_NAND */
+
+#if defined(CONFIG_CMD_IDE)
+#include <ide.h>
+static int sh_marubun_init(void)
+{
+	puts ("IDE:   ");
+	ide_init();
+	return 0;
+}
+#endif /* (CONFIG_CMD_IDE) */
+
+static int sh_mem_env_init(void)
+{
+	mem_malloc_init();
+	malloc_bin_reloc();
+	env_relocate();
+	jumptable_init();
+	return 0;
+}
+
+static int sh_net_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	char *s, *e;
+	int i;
+
+	gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+	s = getenv("ethaddr");
+	for (i = 0; i < 6; ++i) {
+		gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
+		if (s) s = (*e) ? e + 1 : e;
+	}
+
+	return 0;
+}
+
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] =
+{
+	cpu_init,		/* basic cpu dependent setup */
+	board_init,		/* basic board dependent setup */
+	interrupt_init,		/* set up exceptions */
+	env_init,		/* event init */
+	serial_init,		/* SCIF init */
+	watchdog_init,		/* watchdog init */
+	console_init_f,
+	display_options,
+	checkcpu,
+	checkboard,		/* Check support board */
+	dram_init,		/* SDRAM init */
+	timer_init,		/* SuperH Timer (TCNT0 only) init */
+	sh_flash_init,		/* Flash memory(NOR) init*/
+	sh_mem_env_init,
+#if defined(CONFIG_CMD_NAND)
+	sh_nand_init,		/* Flash memory (NAND) init */
+#endif
+	devices_init,
+	console_init_r,
+	interrupt_init,
+#ifdef BOARD_LATE_INIT
+	board_late_init,
+#endif
+#if defined(CONFIG_CMD_NET)
+	sh_net_init,		/* SH specific eth init */
+#endif
+	NULL			/* Terminate this list */
+};
+
+void sh_generic_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	bd_t *bd;
+	init_fnc_t **init_fnc_ptr;
+	char *s;
+	int i;
+
+	memset (gd, 0, CFG_GBL_DATA_SIZE);
+
+	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+
+	gd->bd = (bd_t *) (gd + 1);	/* At end of global data */
+	gd->baudrate = CONFIG_BAUDRATE;
+
+	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
+
+	bd = gd->bd;
+	bd->bi_memstart	= CFG_SDRAM_BASE;
+	bd->bi_memsize = CFG_SDRAM_SIZE;
+	bd->bi_flashstart = CFG_FLASH_BASE;
+#if defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
+	bd->bi_sramstart= CFG_SRAM_BASE;
+	bd->bi_sramsize	= CFG_SRAM_SIZE;
+#endif
+	bd->bi_baudrate	= CONFIG_BAUDRATE;
+
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr , i++) {
+		if ((*init_fnc_ptr) () != 0) {
+			hang();
+		}
+	}
+
+#if defined(CONFIG_CMD_NET)
+	puts ("Net:   ");
+	eth_initialize(gd->bd);
+
+	if ((s = getenv ("bootfile")) != NULL) {
+		copy_filename (BootFile, s, sizeof (BootFile));
+	}
+#endif /* CONFIG_CMD_NET */
+
+	while (1) {
+		main_loop();
+	}
+}
+
+/***********************************************************************/
+
+void hang (void)
+{
+	puts ("Board ERROR\n");
+	for (;;);
+}
diff --git a/lib_sh/sh_linux.c b/lib_sh/sh_linux.c
new file mode 100644
index 000000000..14b6815cd
--- /dev/null
+++ b/lib_sh/sh_linux.c
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/byteorder.h>
+
+extern image_header_t header;	/* common/cmd_bootm.c */
+
+/* The SH kernel reads arguments from the empty zero page at location
+ * 0 at the start of SDRAM. The following are copied from
+ * arch/sh/kernel/setup.c and may require tweaking if the kernel sources
+ * change.
+ */
+#define PARAM   ((unsigned char *)CFG_SDRAM_BASE + 0x1000)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
+#define RAMDISK_IMAGE_START_MASK        0x07FF
+
+#ifdef CFG_DEBUG
+static void hexdump (unsigned char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if ((i % 16) == 0)
+			printf ("%s%08x: ", i ? "\n" : "", (unsigned int) &buf[i]);
+		printf ("%02x ", buf[i]);
+	}
+	printf ("\n");
+}
+#endif
+
+void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+		     ulong addr, ulong *len_ptr, int verify)
+{
+	image_header_t *hdr = &header;
+	char *bootargs = getenv("bootargs");
+	void (*kernel) (void) = (void (*)(void)) ntohl (hdr->ih_ep);
+
+	/* Setup parameters */
+	memset(PARAM, 0, 0x1000);	/* Clear zero page */
+	strcpy(COMMAND_LINE, bootargs);
+
+	kernel();
+}
diff --git a/lib_sh/time.c b/lib_sh/time.c
new file mode 100644
index 000000000..3d33918f2
--- /dev/null
+++ b/lib_sh/time.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processer.h>
+
+static void tmu_timer_start (unsigned int timer)
+{
+	if (timer > 2)
+		return;
+
+	*((volatile unsigned char *) TSTR0) |= (1 << timer);
+}
+
+int timer_init (void)
+{
+	*(volatile u16 *)TCR0 = 0;
+
+	tmu_timer_start (0);
+	return 0;
+}
+
+unsigned long long get_ticks (void)
+{
+	return (0 - *((volatile unsigned int *) TCNT0));
+}
+
+unsigned long get_timer (unsigned long base)
+{
+	return ((0 - *((volatile unsigned int *) TCNT0)) - base);
+}
+
+void set_timer (unsigned long t)
+{
+	*((volatile unsigned int *) TCNT0) = (0 - t);
+}
+
+void reset_timer (void)
+{
+	set_timer (0);
+}
+
+void udelay (unsigned long usec)
+{
+	unsigned int start = get_timer (0);
+	unsigned int end = start + (usec * ((CFG_HZ + 500000) / 1000000));
+
+	while (get_timer (0) < end)
+		continue;
+}
+
+unsigned long get_tbclk (void)
+{
+	return CFG_HZ;
+}
diff --git a/libfdt/Makefile b/libfdt/Makefile
index dc411370f..d166cce79 100644
--- a/libfdt/Makefile
+++ b/libfdt/Makefile
@@ -27,9 +27,9 @@ LIB	= $(obj)libfdt.a
 
 SOBJS	=
 
-COBJS	= fdt.o  fdt_ro.o  fdt_rw.o  fdt_strerror.o  fdt_sw.o  fdt_wip.o
-
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o
 
+COBJS	:= $(COBJS-y)
 SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 
diff --git a/libfdt/fdt.c b/libfdt/fdt.c
index 1ee67ad19..586a36136 100644
--- a/libfdt/fdt.c
+++ b/libfdt/fdt.c
@@ -2,23 +2,52 @@
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
  *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
  *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include "config.h"
-#if CONFIG_OF_LIBFDT
-
 #include "libfdt_env.h"
 
 #include <fdt.h>
@@ -45,9 +74,9 @@ int fdt_check_header(const void *fdt)
 	return 0;
 }
 
-void *fdt_offset_ptr(const void *fdt, int offset, int len)
+const void *fdt_offset_ptr(const void *fdt, int offset, int len)
 {
-	void *p;
+	const void *p;
 
 	if (fdt_version(fdt) >= 0x11)
 		if (((offset + len) < offset)
@@ -61,6 +90,45 @@ void *fdt_offset_ptr(const void *fdt, int offset, int len)
 	return p;
 }
 
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
+{
+	const uint32_t *tagp, *lenp;
+	uint32_t tag;
+	const char *p;
+
+	if (offset % FDT_TAGSIZE)
+		return -1;
+
+	tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
+	if (! tagp)
+		return FDT_END; /* premature end */
+	tag = fdt32_to_cpu(*tagp);
+	offset += FDT_TAGSIZE;
+
+	switch (tag) {
+	case FDT_BEGIN_NODE:
+		/* skip name */
+		do {
+			p = fdt_offset_ptr(fdt, offset++, 1);
+		} while (p && (*p != '\0'));
+		if (! p)
+			return FDT_END;
+		break;
+	case FDT_PROP:
+		lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
+		if (! lenp)
+			return FDT_END;
+		/* skip name offset, length and value */
+		offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
+		break;
+	}
+
+	if (nextoffset)
+		*nextoffset = ALIGN(offset, FDT_TAGSIZE);
+
+	return tag;
+}
+
 const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
 {
 	int len = strlen(s) + 1;
@@ -86,5 +154,3 @@ int fdt_move(const void *fdt, void *buf, int bufsize)
 	memmove(buf, fdt, fdt_totalsize(fdt));
 	return 0;
 }
-
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index 46d525db1..12a37d59f 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -2,23 +2,52 @@
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
  *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
  *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include "config.h"
-#if CONFIG_OF_LIBFDT
-
 #include "libfdt_env.h"
 
 #include <fdt.h>
@@ -26,14 +55,15 @@
 
 #include "libfdt_internal.h"
 
-#define CHECK_HEADER(fdt)	{ \
-	int err; \
-	if ((err = fdt_check_header(fdt)) != 0) \
-		return err; \
-}
+#define CHECK_HEADER(fdt) \
+	{ \
+		int err; \
+		if ((err = fdt_check_header(fdt)) != 0) \
+			return err; \
+	}
 
-static int offset_streq(const void *fdt, int offset,
-			const char *s, int len)
+static int nodename_eq(const void *fdt, int offset,
+		       const char *s, int len)
 {
 	const char *p = fdt_offset_ptr(fdt, offset, len+1);
 
@@ -44,169 +74,36 @@ static int offset_streq(const void *fdt, int offset,
 	if (memcmp(p, s, len) != 0)
 		return 0;
 
-	if (p[len] != '\0')
+	if (p[len] == '\0')
+		return 1;
+	else if (!memchr(s, '@', len) && (p[len] == '@'))
+		return 1;
+	else
 		return 0;
-
-	return 1;
 }
 
-/*
- * Checks if the property name matches.
- */
-static int prop_name_eq(const void *fdt, int offset, const char *name,
-			struct fdt_property **prop, int *lenp)
-{
-	int namestroff, len;
-
-	*prop = fdt_offset_ptr_typed(fdt, offset, *prop);
-	if (! *prop)
-		return -FDT_ERR_BADSTRUCTURE;
-
-	namestroff = fdt32_to_cpu((*prop)->nameoff);
-	if (streq(fdt_string(fdt, namestroff), name)) {
-		len = fdt32_to_cpu((*prop)->len);
-		*prop = fdt_offset_ptr(fdt, offset,
-				       sizeof(**prop) + len);
-		if (*prop) {
-			if (lenp)
-				*lenp = len;
-			return 1;
-		} else
-			return -FDT_ERR_BADSTRUCTURE;
-	}
-	return 0;
-}
-
-/*
- * Return a pointer to the string at the given string offset.
- */
-char *fdt_string(const void *fdt, int stroffset)
+const char *fdt_string(const void *fdt, int stroffset)
 {
 	return (char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
 }
 
-/*
- * Check if the specified node is compatible by comparing the tokens
- * in its "compatible" property with the specified string:
- *
- *   nodeoffset - starting place of the node
- *   compat     - the string to match to one of the tokens in the
- *                "compatible" list.
- */
-int fdt_node_is_compatible(const void *fdt, int nodeoffset,
-			   const char *compat)
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
 {
-	const char* cp;
-	int cplen, len;
-
-	cp = fdt_getprop(fdt, nodeoffset, "compatible", &cplen);
-	if (cp == NULL)
-		return 0;
-	while (cplen > 0) {
-		if (strncmp(cp, compat, strlen(compat)) == 0)
-			return 1;
-		len = strlen(cp) + 1;
-		cp += len;
-		cplen -= len;
-	}
-
-	return 0;
-}
-
-/*
- * Find a node by its device type property. On success, the offset of that
- * node is returned or an error code otherwise:
- *
- *   nodeoffset - the node to start searching from or 0, the node you pass
- *                will not be searched, only the next one will; typically,
- *                you pass 0 to start the search and then what the previous
- *                call returned.
- *   type       - the device type string to match against.
- */
-int fdt_find_node_by_type(const void *fdt, int nodeoffset, const char *type)
-{
-	int offset, nextoffset;
-	struct fdt_property *prop;
-	uint32_t tag;
-	int len, ret;
-
 	CHECK_HEADER(fdt);
-
-	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, NULL);
-	if (tag != FDT_BEGIN_NODE)
-		return -FDT_ERR_BADOFFSET;
-	if (nodeoffset)
-		nodeoffset = 0;	/* start searching with next node */
-
-	while (1) {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset, NULL);
-
-		switch (tag) {
-		case FDT_BEGIN_NODE:
-			nodeoffset = offset;
-			break;
-
-		case FDT_PROP:
-			if (nodeoffset == 0)
-				break;
-			ret = prop_name_eq(fdt, offset, "device_type",
-					   &prop, &len);
-			if (ret < 0)
-				return ret;
-			else if (ret > 0 &&
-				 strncmp(prop->data, type, len - 1) == 0)
-			    return nodeoffset;
-			break;
-
-		case FDT_END_NODE:
-		case FDT_NOP:
-			break;
-
-		case FDT_END:
-			return -FDT_ERR_NOTFOUND;
-
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
-		}
-	}
+	*address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
+	*size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
+	return 0;
 }
 
-/*
- * Find a node based on its device type and one of the tokens in its its
- * "compatible" property. On success, the offset of that node is returned
- * or an error code otherwise:
- *
- *   nodeoffset - the node to start searching from or 0, the node you pass
- *                will not be searched, only the next one will; typically,
- *                you pass 0 to start the search and then what the previous
- *                call returned.
- *   type       - the device type string to match against.
- *   compat     - the string to match to one of the tokens in the
- *                "compatible" list.
- */
-int fdt_find_compatible_node(const void *fdt, int nodeoffset,
-			     const char *type, const char *compat)
+int fdt_num_mem_rsv(const void *fdt)
 {
-	int offset;
+	int i = 0;
 
-	offset = fdt_find_node_by_type(fdt, nodeoffset, type);
-	if (offset < 0 || fdt_node_is_compatible(fdt, offset, compat))
-		return offset;
-
-	return -FDT_ERR_NOTFOUND;
+	while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0)
+		i++;
+	return i;
 }
 
-/*
- * Return the node offset of the node specified by:
- *   parentoffset - starting place (0 to start at the root)
- *   name         - name being searched for
- *   namelen      - length of the name: typically strlen(name)
- *
- * Notes:
- *   If the start node has subnodes, the subnodes are _not_ searched for the
- *     requested name.
- */
 int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
 			       const char *name, int namelen)
 {
@@ -216,13 +113,13 @@ int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
 
 	CHECK_HEADER(fdt);
 
-	tag = fdt_next_tag(fdt, parentoffset, &nextoffset, NULL);
+	tag = fdt_next_tag(fdt, parentoffset, &nextoffset);
 	if (tag != FDT_BEGIN_NODE)
 		return -FDT_ERR_BADOFFSET;
 
 	do {
 		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset, NULL);
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
 
 		switch (tag) {
 		case FDT_END:
@@ -230,15 +127,10 @@ int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
 
 		case FDT_BEGIN_NODE:
 			level++;
-			/*
-			 * If we are nested down levels, ignore the strings
-			 * until we get back to the proper level.
-			 */
 			if (level != 1)
 				continue;
-
-			/* Return the offset if this is "our" string. */
-			if (offset_streq(fdt, offset+FDT_TAGSIZE, name, namelen))
+			if (nodename_eq(fdt, offset+FDT_TAGSIZE, name, namelen))
+				/* Found it! */
 				return offset;
 			break;
 
@@ -258,20 +150,13 @@ int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
 	return -FDT_ERR_NOTFOUND;
 }
 
-/*
- * See fdt_subnode_offset_namelen()
- */
 int fdt_subnode_offset(const void *fdt, int parentoffset,
 		       const char *name)
 {
 	return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name));
 }
 
-/*
- * Searches for the node corresponding to the given path and returns the
- * offset of that node.
- */
-int fdt_find_node_by_path(const void *fdt, const char *path)
+int fdt_path_offset(const void *fdt, const char *path)
 {
 	const char *end = path + strlen(path);
 	const char *p = path;
@@ -279,37 +164,21 @@ int fdt_find_node_by_path(const void *fdt, const char *path)
 
 	CHECK_HEADER(fdt);
 
-	/* Paths must be absolute */
 	if (*path != '/')
 		return -FDT_ERR_BADPATH;
 
-	/* Handle the root path: root offset is 0 */
-	if (strcmp(path, "/") == 0)
-		return 0;
-
 	while (*p) {
 		const char *q;
 
-		/* Skip path separator(s) */
 		while (*p == '/')
 			p++;
 		if (! *p)
-			return -FDT_ERR_BADPATH;
-
-		/*
-		 * Find the next path separator.  The characters between
-		 * p and q are the next segment of the the path to find.
-		 */
+			return offset;
 		q = strchr(p, '/');
 		if (! q)
 			q = end;
 
-		/*
-		 * Find the offset corresponding to the this path segment.
-		 */
 		offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
-
-		/* Oops, error, abort abort abort */
 		if (offset < 0)
 			return offset;
 
@@ -319,17 +188,37 @@ int fdt_find_node_by_path(const void *fdt, const char *path)
 	return offset;
 }
 
-/*
- * Given the offset of a node and a name of a property in that node, return
- * a pointer to the property struct.
- */
-struct fdt_property *fdt_get_property(const void *fdt,
-				      int nodeoffset,
-				      const char *name, int *lenp)
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
+{
+	const struct fdt_node_header *nh;
+	int err;
+
+	if ((err = fdt_check_header(fdt)) != 0)
+		goto fail;
+
+	err = -FDT_ERR_BADOFFSET;
+	nh = fdt_offset_ptr(fdt, nodeoffset, sizeof(*nh));
+	if (!nh || (fdt32_to_cpu(nh->tag) != FDT_BEGIN_NODE))
+		goto fail;
+
+	if (len)
+		*len = strlen(nh->name);
+
+	return nh->name;
+
+ fail:
+	if (len)
+		*len = err;
+	return NULL;
+}
+
+const struct fdt_property *fdt_get_property(const void *fdt,
+					    int nodeoffset,
+					    const char *name, int *lenp)
 {
-	int level = 0;
 	uint32_t tag;
-	struct fdt_property *prop;
+	const struct fdt_property *prop;
+	int namestroff;
 	int offset, nextoffset;
 	int err;
 
@@ -340,63 +229,59 @@ struct fdt_property *fdt_get_property(const void *fdt,
 	if (nodeoffset % FDT_TAGSIZE)
 		goto fail;
 
-	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, NULL);
+	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
 	if (tag != FDT_BEGIN_NODE)
 		goto fail;
 
 	do {
 		offset = nextoffset;
 
-		tag = fdt_next_tag(fdt, offset, &nextoffset, NULL);
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
 		switch (tag) {
 		case FDT_END:
 			err = -FDT_ERR_TRUNCATED;
 			goto fail;
 
 		case FDT_BEGIN_NODE:
-			level++;
-			break;
-
 		case FDT_END_NODE:
-			level--;
+		case FDT_NOP:
 			break;
 
 		case FDT_PROP:
-			/*
-			 * If we are nested down levels, ignore the strings
-			 * until we get back to the proper level.
-			 */
-			if (level != 0)
-				continue;
-
-			err = prop_name_eq(fdt, offset, name, &prop, lenp);
-			if (err > 0)
-				return prop;
-			else if (err < 0)
+			err = -FDT_ERR_BADSTRUCTURE;
+			prop = fdt_offset_ptr(fdt, offset, sizeof(*prop));
+			if (! prop)
 				goto fail;
-			break;
+			namestroff = fdt32_to_cpu(prop->nameoff);
+			if (streq(fdt_string(fdt, namestroff), name)) {
+				/* Found it! */
+				int len = fdt32_to_cpu(prop->len);
+				prop = fdt_offset_ptr(fdt, offset,
+						      sizeof(*prop)+len);
+				if (! prop)
+					goto fail;
+
+				if (lenp)
+					*lenp = len;
 
-		case FDT_NOP:
+				return prop;
+			}
 			break;
 
 		default:
 			err = -FDT_ERR_BADSTRUCTURE;
 			goto fail;
 		}
-	} while (level >= 0);
+	} while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE));
 
 	err = -FDT_ERR_NOTFOUND;
-fail:
+ fail:
 	if (lenp)
 		*lenp = err;
 	return NULL;
 }
 
-/*
- * Given the offset of a node and a name of a property in that node, return
- * a pointer to the property data (ONLY).
- */
-void *fdt_getprop(const void *fdt, int nodeoffset,
+const void *fdt_getprop(const void *fdt, int nodeoffset,
 		  const char *name, int *lenp)
 {
 	const struct fdt_property *prop;
@@ -405,132 +290,294 @@ void *fdt_getprop(const void *fdt, int nodeoffset,
 	if (! prop)
 		return NULL;
 
-	return (void *)prop->data;
+	return prop->data;
 }
 
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
+{
+	const uint32_t *php;
+	int len;
+
+	php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len);
+	if (!php || (len != sizeof(*php)))
+		return 0;
+
+	return fdt32_to_cpu(*php);
+}
 
-uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset, char **namep)
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 {
-	const uint32_t *tagp, *lenp;
 	uint32_t tag;
-	const char *p;
-
-	if (offset % FDT_TAGSIZE)
-		return -1;
-
-	tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
-	if (! tagp)
-		return FDT_END; /* premature end */
-	tag = fdt32_to_cpu(*tagp);
-	offset += FDT_TAGSIZE;
-
-	switch (tag) {
-	case FDT_BEGIN_NODE:
-		if(namep)
-			*namep = fdt_offset_ptr(fdt, offset, 1);
-
-		/* skip name */
-		do {
-			p = fdt_offset_ptr(fdt, offset++, 1);
-		} while (p && (*p != '\0'));
-		if (! p)
-			return FDT_END;
-		break;
-	case FDT_PROP:
-		lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
-		if (! lenp)
-			return FDT_END;
-		/*
-		 * Get the property and set the namep to the name.
-		 */
-		if(namep) {
-			struct fdt_property *prop;
-
-			prop = fdt_offset_ptr_typed(fdt, offset - FDT_TAGSIZE, prop);
-			if (! prop)
-				return -FDT_ERR_BADSTRUCTURE;
-			*namep = fdt_string(fdt, fdt32_to_cpu(prop->nameoff));
+	int p = 0, overflow = 0;
+	int offset, nextoffset, namelen;
+	const char *name;
+
+	CHECK_HEADER(fdt);
+
+	tag = fdt_next_tag(fdt, 0, &nextoffset);
+	if (tag != FDT_BEGIN_NODE)
+		return -FDT_ERR_BADSTRUCTURE;
+
+	if (buflen < 2)
+		return -FDT_ERR_NOSPACE;
+	buf[0] = '/';
+	p = 1;
+
+	while (nextoffset <= nodeoffset) {
+		offset = nextoffset;
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
+		switch (tag) {
+		case FDT_END:
+			return -FDT_ERR_BADOFFSET;
+
+		case FDT_BEGIN_NODE:
+			name = fdt_get_name(fdt, offset, &namelen);
+			if (!name)
+				return namelen;
+			if (overflow || ((p + namelen + 1) > buflen)) {
+				overflow++;
+				break;
+			}
+			memcpy(buf + p, name, namelen);
+			p += namelen;
+			buf[p++] = '/';
+			break;
+
+		case FDT_END_NODE:
+			if (overflow) {
+				overflow--;
+				break;
+			}
+			do {
+				p--;
+			} while  (buf[p-1] != '/');
+			break;
+
+		case FDT_PROP:
+		case FDT_NOP:
+			break;
+
+		default:
+			return -FDT_ERR_BADSTRUCTURE;
 		}
-		/* skip name offset, length and value */
-		offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
-		break;
 	}
 
-	if (nextoffset)
-		*nextoffset = ALIGN(offset, FDT_TAGSIZE);
+	if (overflow)
+		return -FDT_ERR_NOSPACE;
 
-	return tag;
+	if (p > 1) /* special case so that root path is "/", not "" */
+		p--;
+	buf[p] = '\0';
+	return p;
 }
 
-/*
- * Return the number of used reserve map entries and total slots available.
- */
-int fdt_num_reservemap(void *fdt, int *used, int *total)
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+				 int supernodedepth, int *nodedepth)
 {
-	struct fdt_reserve_entry *re;
-	int  start;
-	int  end;
-	int  err = fdt_check_header(fdt);
-
-	if (err != 0)
-		return err;
-
-	start = fdt_off_mem_rsvmap(fdt);
-
-	/*
-	 * Convention is that the reserve map is before the dt_struct,
-	 * but it does not have to be.
-	 */
-	end = fdt_totalsize(fdt);
-	if (end > fdt_off_dt_struct(fdt))
-		end = fdt_off_dt_struct(fdt);
-	if (end > fdt_off_dt_strings(fdt))
-		end = fdt_off_dt_strings(fdt);
-
-	/*
-	 * Since the reserved area list is zero terminated, you get one fewer.
-	 */
-	if (total)
-		*total = ((end - start) / sizeof(struct fdt_reserve_entry)) - 1;
-
-	if (used) {
-		*used = 0;
-		while (start < end) {
-			re = (struct fdt_reserve_entry *)(fdt + start);
-			if (re->size == 0)
-				return 0;	/* zero size terminates the list */
-
-			*used += 1;
-			start += sizeof(struct fdt_reserve_entry);
+	int level = -1;
+	uint32_t tag;
+	int offset, nextoffset = 0;
+	int supernodeoffset = -FDT_ERR_INTERNAL;
+
+	CHECK_HEADER(fdt);
+
+	if (supernodedepth < 0)
+		return -FDT_ERR_NOTFOUND;
+
+	do {
+		offset = nextoffset;
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
+		switch (tag) {
+		case FDT_END:
+			return -FDT_ERR_BADOFFSET;
+
+		case FDT_BEGIN_NODE:
+			level++;
+			if (level == supernodedepth)
+				supernodeoffset = offset;
+			break;
+
+		case FDT_END_NODE:
+			level--;
+			break;
+
+		case FDT_PROP:
+		case FDT_NOP:
+			break;
+
+		default:
+			return -FDT_ERR_BADSTRUCTURE;
 		}
-		/*
-		 * If we get here, there was no zero size termination.
-		 */
-		return -FDT_ERR_BADLAYOUT;
+	} while (offset < nodeoffset);
+
+	if (nodedepth)
+		*nodedepth = level;
+
+	if (supernodedepth > level)
+		return -FDT_ERR_NOTFOUND;
+	return supernodeoffset;
+}
+
+int fdt_node_depth(const void *fdt, int nodeoffset)
+{
+	int nodedepth;
+	int err;
+
+	err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
+	if (err)
+		return (err < 0) ? err : -FDT_ERR_INTERNAL;
+	return nodedepth;
+}
+
+int fdt_parent_offset(const void *fdt, int nodeoffset)
+{
+	int nodedepth = fdt_node_depth(fdt, nodeoffset);
+
+	if (nodedepth < 0)
+		return nodedepth;
+	return fdt_supernode_atdepth_offset(fdt, nodeoffset,
+					    nodedepth - 1, NULL);
+}
+
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+				  const char *propname,
+				  const void *propval, int proplen)
+{
+	uint32_t tag;
+	int offset, nextoffset;
+	const void *val;
+	int len;
+
+	CHECK_HEADER(fdt);
+
+	if (startoffset >= 0) {
+		tag = fdt_next_tag(fdt, startoffset, &nextoffset);
+		if (tag != FDT_BEGIN_NODE)
+			return -FDT_ERR_BADOFFSET;
+	} else {
+		nextoffset = 0;
 	}
-	return 0;
+
+	/* FIXME: The algorithm here is pretty horrible: we scan each
+	 * property of a node in fdt_getprop(), then if that didn't
+	 * find what we want, we scan over them again making our way
+	 * to the next node.  Still it's the easiest to implement
+	 * approach; performance can come later. */
+	do {
+		offset = nextoffset;
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+		switch (tag) {
+		case FDT_BEGIN_NODE:
+			val = fdt_getprop(fdt, offset, propname, &len);
+			if (val
+			    && (len == proplen)
+			    && (memcmp(val, propval, len) == 0))
+				return offset;
+			break;
+
+		case FDT_PROP:
+		case FDT_END:
+		case FDT_END_NODE:
+		case FDT_NOP:
+			break;
+
+		default:
+			return -FDT_ERR_BADSTRUCTURE;
+		}
+	} while (tag != FDT_END);
+
+	return -FDT_ERR_NOTFOUND;
 }
 
-/*
- * Return the nth reserve map entry.
- */
-int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re)
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
 {
-	int  used;
-	int  total;
-	int  err;
+	if ((phandle == 0) || (phandle == -1))
+		return -FDT_ERR_BADPHANDLE;
+	phandle = cpu_to_fdt32(phandle);
+	return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle",
+					     &phandle, sizeof(phandle));
+}
 
-	err = fdt_num_reservemap(fdt, &used, &total);
-	if (err != 0)
-		return err;
+int _stringlist_contains(const void *strlist, int listlen, const char *str)
+{
+	int len = strlen(str);
+	const void *p;
 
-	if (n >= total)
-		return -FDT_ERR_NOSPACE;
-	if (re) {
-		*re = *(struct fdt_reserve_entry *)
-			_fdt_offset_ptr(fdt, n * sizeof(struct fdt_reserve_entry));
+	while (listlen >= len) {
+		if (memcmp(str, strlist, len+1) == 0)
+			return 1;
+		p = memchr(strlist, '\0', listlen);
+		if (!p)
+			return 0; /* malformed strlist.. */
+		listlen -= (p-strlist) + 1;
+		strlist = p + 1;
 	}
 	return 0;
 }
 
-#endif /* CONFIG_OF_LIBFDT */
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+			      const char *compatible)
+{
+	const void *prop;
+	int len;
+
+	prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
+	if (!prop)
+		return len;
+	if (_stringlist_contains(prop, len, compatible))
+		return 0;
+	else
+		return 1;
+}
+
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+				  const char *compatible)
+{
+	uint32_t tag;
+	int offset, nextoffset;
+	int err;
+
+	CHECK_HEADER(fdt);
+
+	if (startoffset >= 0) {
+		tag = fdt_next_tag(fdt, startoffset, &nextoffset);
+		if (tag != FDT_BEGIN_NODE)
+			return -FDT_ERR_BADOFFSET;
+	} else {
+		nextoffset = 0;
+	}
+
+	/* FIXME: The algorithm here is pretty horrible: we scan each
+	 * property of a node in fdt_node_check_compatible(), then if
+	 * that didn't find what we want, we scan over them again
+	 * making our way to the next node.  Still it's the easiest to
+	 * implement approach; performance can come later. */
+	do {
+		offset = nextoffset;
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+		switch (tag) {
+		case FDT_BEGIN_NODE:
+			err = fdt_node_check_compatible(fdt, offset,
+							compatible);
+			if ((err < 0)
+			    && (err != -FDT_ERR_NOTFOUND))
+				return err;
+			else if (err == 0)
+				return offset;
+			break;
+
+		case FDT_PROP:
+		case FDT_END:
+		case FDT_END_NODE:
+		case FDT_NOP:
+			break;
+
+		default:
+			return -FDT_ERR_BADSTRUCTURE;
+		}
+	} while (tag != FDT_END);
+
+	return -FDT_ERR_NOTFOUND;
+}
diff --git a/libfdt/fdt_rw.c b/libfdt/fdt_rw.c
index 55fcc41d1..dfe5628a3 100644
--- a/libfdt/fdt_rw.c
+++ b/libfdt/fdt_rw.c
@@ -2,23 +2,52 @@
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
  *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
  *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include "config.h"
-#if CONFIG_OF_LIBFDT
-
 #include "libfdt_env.h"
 
 #include <fdt.h>
@@ -26,25 +55,32 @@
 
 #include "libfdt_internal.h"
 
+static int _blocks_misordered(const void *fdt,
+			      int mem_rsv_size, int struct_size)
+{
+	return (fdt_off_mem_rsvmap(fdt) < ALIGN(sizeof(struct fdt_header), 8))
+		|| (fdt_off_dt_struct(fdt) <
+		    (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
+		|| (fdt_off_dt_strings(fdt) <
+		    (fdt_off_dt_struct(fdt) + struct_size))
+		|| (fdt_totalsize(fdt) <
+		    (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
+}
+
 static int rw_check_header(void *fdt)
 {
 	int err;
 
 	if ((err = fdt_check_header(fdt)))
 		return err;
-	if (fdt_version(fdt) < 0x11)
+	if (fdt_version(fdt) < 17)
 		return -FDT_ERR_BADVERSION;
-	if (fdt_off_mem_rsvmap(fdt) < ALIGN(sizeof(struct fdt_header), 8))
-		return -FDT_ERR_BADLAYOUT;
-	if (fdt_off_dt_struct(fdt) <
-	    (fdt_off_mem_rsvmap(fdt) + sizeof(struct fdt_reserve_entry)))
-		return -FDT_ERR_BADLAYOUT;
-	if (fdt_off_dt_strings(fdt) <
-	    (fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt)))
-		return -FDT_ERR_BADLAYOUT;
-	if (fdt_totalsize(fdt) <
-	    (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)))
+	if (_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
+			       fdt_size_dt_struct(fdt)))
 		return -FDT_ERR_BADLAYOUT;
+	if (fdt_version(fdt) > 17)
+		fdt_set_version(fdt, 17);
+
 	return 0;
 }
 
@@ -72,6 +108,19 @@ static int _blob_splice(void *fdt, void *p, int oldlen, int newlen)
 	return 0;
 }
 
+static int _blob_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
+				int oldn, int newn)
+{
+	int delta = (newn - oldn) * sizeof(*p);
+	int err;
+	err = _blob_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
+	if (err)
+		return err;
+	fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
+	fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+	return 0;
+}
+
 static int _blob_splice_struct(void *fdt, void *p,
 			       int oldlen, int newlen)
 {
@@ -81,8 +130,8 @@ static int _blob_splice_struct(void *fdt, void *p,
 	if ((err = _blob_splice(fdt, p, oldlen, newlen)))
 		return err;
 
-	fdt_set_header(fdt, size_dt_struct, fdt_size_dt_struct(fdt) + delta);
-	fdt_set_header(fdt, off_dt_strings, fdt_off_dt_strings(fdt) + delta);
+	fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
+	fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
 	return 0;
 }
 
@@ -94,7 +143,7 @@ static int _blob_splice_string(void *fdt, int newlen)
 	if ((err = _blob_splice(fdt, p, 0, newlen)))
 		return err;
 
-	fdt_set_header(fdt, size_dt_strings, fdt_size_dt_strings(fdt) + newlen);
+	fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
 	return 0;
 }
 
@@ -120,13 +169,47 @@ static int _find_add_string(void *fdt, const char *s)
 	return (new - strtab);
 }
 
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
+{
+	struct fdt_reserve_entry *re;
+	int err;
+
+	if ((err = rw_check_header(fdt)))
+		return err;
+
+	re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
+	err = _blob_splice_mem_rsv(fdt, re, 0, 1);
+	if (err)
+		return err;
+
+	re->address = cpu_to_fdt64(address);
+	re->size = cpu_to_fdt64(size);
+	return 0;
+}
+
+int fdt_del_mem_rsv(void *fdt, int n)
+{
+	struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
+	int err;
+
+	if ((err = rw_check_header(fdt)))
+		return err;
+	if (n >= fdt_num_mem_rsv(fdt))
+		return -FDT_ERR_NOTFOUND;
+
+	err = _blob_splice_mem_rsv(fdt, re, 1, 0);
+	if (err)
+		return err;
+	return 0;
+}
+
 static int _resize_property(void *fdt, int nodeoffset, const char *name, int len,
 			    struct fdt_property **prop)
 {
 	int oldlen;
 	int err;
 
-	*prop = fdt_get_property(fdt, nodeoffset, name, &oldlen);
+	*prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
 	if (! (*prop))
 		return oldlen;
 
@@ -148,7 +231,7 @@ static int _add_property(void *fdt, int nodeoffset, const char *name, int len,
 	int namestroff;
 	int err;
 
-	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, NULL);
+	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
 	if (tag != FDT_BEGIN_NODE)
 		return -FDT_ERR_BADOFFSET;
 
@@ -156,7 +239,7 @@ static int _add_property(void *fdt, int nodeoffset, const char *name, int len,
 	if (namestroff < 0)
 		return namestroff;
 
-	*prop = _fdt_offset_ptr(fdt, nextoffset);
+	*prop = _fdt_offset_ptr_w(fdt, nextoffset);
 	proplen = sizeof(**prop) + ALIGN(len, FDT_TAGSIZE);
 
 	err = _blob_splice_struct(fdt, *prop, 0, proplen);
@@ -188,32 +271,6 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name,
 	return 0;
 }
 
-/**
- * fdt_find_and_setprop: Find a node and set it's property
- *
- * @fdt: ptr to device tree
- * @node: path of node
- * @prop: property name
- * @val: ptr to new value
- * @len: length of new property value
- * @create: flag to create the property if it doesn't exist
- *
- * Convenience function to directly set a property given the path to the node.
- */
-int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
-			 const void *val, int len, int create)
-{
-	int nodeoff = fdt_find_node_by_path(fdt, node);
-
-	if (nodeoff < 0)
-		return nodeoff;
-
-	if ((!create) && (fdt_get_property(fdt, nodeoff, prop, 0) == NULL))
-		return 0; /* create flag not set; so exit quietly */
-
-	return fdt_setprop(fdt, nodeoff, prop, val, len);
-}
-
 int fdt_delprop(void *fdt, int nodeoffset, const char *name)
 {
 	struct fdt_property *prop;
@@ -221,7 +278,7 @@ int fdt_delprop(void *fdt, int nodeoffset, const char *name)
 
 	RW_CHECK_HEADER(fdt);
 
-	prop = fdt_get_property(fdt, nodeoffset, name, &len);
+	prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
 	if (! prop)
 		return len;
 
@@ -248,13 +305,13 @@ int fdt_add_subnode_namelen(void *fdt, int parentoffset,
 		return offset;
 
 	/* Try to place the new node after the parent's properties */
-	fdt_next_tag(fdt, parentoffset, &nextoffset, NULL); /* skip the BEGIN_NODE */
+	fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */
 	do {
 		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset, NULL);
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
 	} while (tag == FDT_PROP);
 
-	nh = _fdt_offset_ptr(fdt, offset);
+	nh = _fdt_offset_ptr_w(fdt, offset);
 	nodelen = sizeof(*nh) + ALIGN(namelen+1, FDT_TAGSIZE) + FDT_TAGSIZE;
 
 	err = _blob_splice_struct(fdt, nh, 0, nodelen);
@@ -279,46 +336,112 @@ int fdt_del_node(void *fdt, int nodeoffset)
 {
 	int endoffset;
 
+	RW_CHECK_HEADER(fdt);
+
 	endoffset = _fdt_node_end_offset(fdt, nodeoffset);
 	if (endoffset < 0)
 		return endoffset;
 
-	return _blob_splice_struct(fdt, _fdt_offset_ptr(fdt, nodeoffset),
+	return _blob_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
 				   endoffset - nodeoffset, 0);
 }
 
-int fdt_open_into(void *fdt, void *buf, int bufsize)
+static void _packblocks(const void *fdt, void *buf,
+		       int mem_rsv_size, int struct_size)
+{
+	int mem_rsv_off, struct_off, strings_off;
+
+	mem_rsv_off = ALIGN(sizeof(struct fdt_header), 8);
+	struct_off = mem_rsv_off + mem_rsv_size;
+	strings_off = struct_off + struct_size;
+
+	memmove(buf + mem_rsv_off, fdt + fdt_off_mem_rsvmap(fdt), mem_rsv_size);
+	fdt_set_off_mem_rsvmap(buf, mem_rsv_off);
+
+	memcpy(buf + struct_off, fdt + fdt_off_dt_struct(fdt), struct_size);
+	fdt_set_off_dt_struct(buf, struct_off);
+	fdt_set_size_dt_struct(buf, struct_size);
+
+	memcpy(buf + strings_off, fdt + fdt_off_dt_strings(fdt),
+	       fdt_size_dt_strings(fdt));
+	fdt_set_off_dt_strings(buf, strings_off);
+	fdt_set_size_dt_strings(buf, fdt_size_dt_strings(fdt));
+}
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize)
 {
 	int err;
+	int mem_rsv_size, struct_size;
+	int newsize;
+	void *tmp;
 
-	err = fdt_move(fdt, buf, bufsize);
+	err = fdt_check_header(fdt);
 	if (err)
 		return err;
 
-	fdt = buf;
+	mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+		* sizeof(struct fdt_reserve_entry);
 
-	fdt_set_header(fdt, totalsize, bufsize);
+	if (fdt_version(fdt) >= 17) {
+		struct_size = fdt_size_dt_struct(fdt);
+	} else {
+		struct_size = 0;
+		while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
+			;
+	}
 
-	/* FIXME: re-order if necessary */
+	if (!_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
+		/* no further work necessary */
+		err = fdt_move(fdt, buf, bufsize);
+		if (err)
+			return err;
+		fdt_set_version(buf, 17);
+		fdt_set_size_dt_struct(buf, struct_size);
+		fdt_set_totalsize(buf, bufsize);
+		return 0;
+	}
 
-	err = rw_check_header(fdt);
-	if (err)
-		return err;
+	/* Need to reorder */
+	newsize = ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+		+ struct_size + fdt_size_dt_strings(fdt);
+
+	if (bufsize < newsize)
+		return -FDT_ERR_NOSPACE;
+
+	if (((buf + newsize) <= fdt)
+	    || (buf >= (fdt + fdt_totalsize(fdt)))) {
+		tmp = buf;
+	} else {
+		tmp = (void *)fdt + fdt_totalsize(fdt);
+		if ((tmp + newsize) > (buf + bufsize))
+			return -FDT_ERR_NOSPACE;
+	}
+
+	_packblocks(fdt, tmp, mem_rsv_size, struct_size);
+	memmove(buf, tmp, newsize);
+
+	fdt_set_magic(buf, FDT_MAGIC);
+	fdt_set_totalsize(buf, bufsize);
+	fdt_set_version(buf, 17);
+	fdt_set_last_comp_version(buf, 16);
+	fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt));
 
 	return 0;
 }
 
 int fdt_pack(void *fdt)
 {
+	int mem_rsv_size;
 	int err;
 
 	err = rw_check_header(fdt);
 	if (err)
 		return err;
 
-	/* FIXME: pack components */
-	fdt_set_header(fdt, totalsize, _blob_data_size(fdt));
+	mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+		* sizeof(struct fdt_reserve_entry);
+	_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
+	fdt_set_totalsize(fdt, _blob_data_size(fdt));
+
 	return 0;
 }
-
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/libfdt/fdt_strerror.c b/libfdt/fdt_strerror.c
index b49c952f3..f9d32ef53 100644
--- a/libfdt/fdt_strerror.c
+++ b/libfdt/fdt_strerror.c
@@ -2,23 +2,52 @@
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
  *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
  *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include "config.h"
-#if CONFIG_OF_LIBFDT
-
 #include "libfdt_env.h"
 
 #include <fdt.h>
@@ -65,5 +94,3 @@ const char *fdt_strerror(int errval)
 
 	return "<unknown error>";
 }
-
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/libfdt/fdt_sw.c b/libfdt/fdt_sw.c
index c7eea8ff3..dda2de34b 100644
--- a/libfdt/fdt_sw.c
+++ b/libfdt/fdt_sw.c
@@ -2,23 +2,52 @@
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
  *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
  *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include "config.h"
-#if CONFIG_OF_LIBFDT
-
 #include "libfdt_env.h"
 
 #include <fdt.h>
@@ -44,8 +73,8 @@ static void *grab_space(void *fdt, int len)
 	if ((offset + len < offset) || (offset + len > spaceleft))
 		return NULL;
 
-	fdt_set_header(fdt, size_dt_struct, offset + len);
-	return fdt_offset_ptr(fdt, offset, len);
+	fdt_set_size_dt_struct(fdt, offset + len);
+	return fdt_offset_ptr_w(fdt, offset, len);
 }
 
 int fdt_create(void *buf, int bufsize)
@@ -57,15 +86,15 @@ int fdt_create(void *buf, int bufsize)
 
 	memset(buf, 0, bufsize);
 
-	fdt_set_header(fdt, magic, SW_MAGIC);
-	fdt_set_header(fdt, version, FDT_LAST_SUPPORTED_VERSION);
-	fdt_set_header(fdt, last_comp_version, FDT_FIRST_SUPPORTED_VERSION);
-	fdt_set_header(fdt, totalsize, bufsize);
+	fdt_set_magic(fdt, SW_MAGIC);
+	fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
+	fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
+	fdt_set_totalsize(fdt,  bufsize);
 
-	fdt_set_header(fdt, off_mem_rsvmap, ALIGN(sizeof(struct fdt_header),
-					      sizeof(struct fdt_reserve_entry)));
-	fdt_set_header(fdt, off_dt_struct, fdt_off_mem_rsvmap(fdt));
-	fdt_set_header(fdt, off_dt_strings, bufsize);
+	fdt_set_off_mem_rsvmap(fdt, ALIGN(sizeof(struct fdt_header),
+					  sizeof(struct fdt_reserve_entry)));
+	fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
+	fdt_set_off_dt_strings(fdt, bufsize);
 
 	return 0;
 }
@@ -85,11 +114,11 @@ int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
 	if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
 		return -FDT_ERR_NOSPACE;
 
-	re = (struct fdt_reserve_entry *)((void *)fdt + offset);
+	re = (struct fdt_reserve_entry *)(fdt + offset);
 	re->address = cpu_to_fdt64(addr);
 	re->size = cpu_to_fdt64(size);
 
-	fdt_set_header(fdt, off_dt_struct, offset + sizeof(*re));
+	fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
 
 	return 0;
 }
@@ -152,7 +181,7 @@ static int find_add_string(void *fdt, const char *s)
 		return 0; /* no more room :( */
 
 	memcpy(strtab + offset, s, len);
-	fdt_set_header(fdt, size_dt_strings, strtabsize + len);
+	fdt_set_size_dt_strings(fdt, strtabsize + len);
 	return offset;
 }
 
@@ -202,14 +231,14 @@ int fdt_finish(void *fdt)
 	oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
 	newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
 	memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
-	fdt_set_header(fdt, off_dt_strings, newstroffset);
+	fdt_set_off_dt_strings(fdt, newstroffset);
 
 	/* Walk the structure, correcting string offsets */
 	offset = 0;
-	while ((tag = fdt_next_tag(fdt, offset, &nextoffset, NULL)) != FDT_END) {
+	while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
 		if (tag == FDT_PROP) {
-			struct fdt_property *prop = fdt_offset_ptr(fdt, offset,
-								   sizeof(*prop));
+			struct fdt_property *prop =
+				fdt_offset_ptr_w(fdt, offset, sizeof(*prop));
 			int nameoff;
 
 			if (! prop)
@@ -223,9 +252,7 @@ int fdt_finish(void *fdt)
 	}
 
 	/* Finally, adjust the header */
-	fdt_set_header(fdt, totalsize, newstroffset + fdt_size_dt_strings(fdt));
-	fdt_set_header(fdt, magic, FDT_MAGIC);
+	fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
+	fdt_set_magic(fdt, FDT_MAGIC);
 	return 0;
 }
-
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/libfdt/fdt_wip.c b/libfdt/fdt_wip.c
index 2d39aabe1..88e24b831 100644
--- a/libfdt/fdt_wip.c
+++ b/libfdt/fdt_wip.c
@@ -2,23 +2,52 @@
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
  *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
  *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include "config.h"
-#if CONFIG_OF_LIBFDT
-
 #include "libfdt_env.h"
 
 #include <fdt.h>
@@ -32,7 +61,7 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
 	void *propval;
 	int proplen;
 
-	propval = fdt_getprop(fdt, nodeoffset, name, &proplen);
+	propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
 	if (! propval)
 		return proplen;
 
@@ -56,7 +85,7 @@ int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
 	struct fdt_property *prop;
 	int len;
 
-	prop = fdt_get_property(fdt, nodeoffset, name, &len);
+	prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
 	if (! prop)
 		return len;
 
@@ -71,12 +100,12 @@ int _fdt_node_end_offset(void *fdt, int nodeoffset)
 	uint32_t tag;
 	int offset, nextoffset;
 
-	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, NULL);
+	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
 	if (tag != FDT_BEGIN_NODE)
 		return -FDT_ERR_BADOFFSET;
 	do {
 		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset, NULL);
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
 
 		switch (tag) {
 		case FDT_END:
@@ -110,33 +139,6 @@ int fdt_nop_node(void *fdt, int nodeoffset)
 	if (endoffset < 0)
 		return endoffset;
 
-	nop_region(fdt_offset_ptr(fdt, nodeoffset, 0), endoffset - nodeoffset);
+	nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), endoffset - nodeoffset);
 	return 0;
 }
-
-/*
- * Replace a reserve map entry in the nth slot.
- */
-int fdt_replace_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size)
-{
-	struct fdt_reserve_entry *re;
-	int  used;
-	int  total;
-	int  err;
-
-	err = fdt_num_reservemap(fdt, &used, &total);
-	if (err != 0)
-		return err;
-
-	if (n >= total)
-		return -FDT_ERR_NOSPACE;
-	re = (struct fdt_reserve_entry *)
-		(fdt + fdt_off_mem_rsvmap(fdt) +
-		 (n * sizeof(struct fdt_reserve_entry)));
-	re->address = cpu_to_fdt64(addr);
-	re->size    = cpu_to_fdt64(size);
-
-	return 0;
-}
-
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/libfdt/libfdt_internal.h b/libfdt/libfdt_internal.h
index cc9633c9e..1e60936be 100644
--- a/libfdt/libfdt_internal.h
+++ b/libfdt/libfdt_internal.h
@@ -4,19 +4,51 @@
  * libfdt - Flat Device Tree manipulation
  * Copyright (C) 2006 David Gibson, IBM Corporation.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 #include <fdt.h>
 
@@ -26,13 +58,30 @@
 #define memeq(p, q, n)	(memcmp((p), (q), (n)) == 0)
 #define streq(p, q)	(strcmp((p), (q)) == 0)
 
-int _fdt_check_header(const void *fdt);
+uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
 const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
 int _fdt_node_end_offset(void *fdt, int nodeoffset);
 
-static inline void *_fdt_offset_ptr(const struct fdt_header *fdt, int offset)
+static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
+{
+	return fdt + fdt_off_dt_struct(fdt) + offset;
+}
+
+static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
+{
+	return (void *)_fdt_offset_ptr(fdt, offset);
+}
+
+static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
+{
+	const struct fdt_reserve_entry *rsv_table =
+		fdt + fdt_off_mem_rsvmap(fdt);
+
+	return rsv_table + n;
+}
+static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
 {
-	return (void *)fdt + fdt_off_dt_struct(fdt) + offset;
+	return (void *)_fdt_mem_rsv(fdt, n);
 }
 
 #define SW_MAGIC		(~FDT_MAGIC)
diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile
index 926476f91..6e53bea01 100644
--- a/nand_spl/board/amcc/acadia/Makefile
+++ b/nand_spl/board/amcc/acadia/Makefile
@@ -29,7 +29,7 @@ LDFLAGS	= -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
 AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
-SOBJS	= start.o resetvec.o
+SOBJS	= start.o resetvec.o cache.o
 COBJS	= gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o pll.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@@ -63,6 +63,10 @@ $(nandobj)System.map:	$(nandobj)u-boot-spl
 # create symbolic links for common files
 
 # from cpu directory
+$(obj)cache.S:
+	@rm -f $(obj)cache.S
+	ln -s $(SRCTREE)/cpu/ppc4xx/cache.S $(obj)cache.S
+
 $(obj)gpio.c:
 	@rm -f $(obj)gpio.c
 	ln -s $(SRCTREE)/cpu/ppc4xx/gpio.c $(obj)gpio.c
@@ -96,7 +100,7 @@ $(obj)nand_boot.c:
 # from drivers/nand directory
 $(obj)nand_ecc.c:
 	@rm -f $(obj)nand_ecc.c
-	ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c
+	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
 
 #########################################################################
 
diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile
index 8b5461dcf..3a633fb88 100644
--- a/nand_spl/board/amcc/bamboo/Makefile
+++ b/nand_spl/board/amcc/bamboo/Makefile
@@ -82,7 +82,7 @@ $(obj)nand_boot.c:
 # from drivers/nand directory
 $(obj)nand_ecc.c:
 	@rm -f $(obj)nand_ecc.c
-	ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c
+	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
 
 ifneq ($(OBJTREE), $(SRCTREE))
 $(obj)sdram.c:
diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c
index 4f09072df..ac77d066c 100644
--- a/nand_spl/board/amcc/bamboo/sdram.c
+++ b/nand_spl/board/amcc/bamboo/sdram.c
@@ -44,6 +44,12 @@ static void wait_init_complete(void)
  * not enough free space to implement the complete I2C SPD DDR autodetection
  * routines. Therefore the Bamboo only supports the onboard 64MBytes of SDRAM
  * when booting from NAND flash.
+ *
+ * Note:
+ * As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
+ * DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
+ * modules are still plugged in. So it is recommended to remove the DIMM
+ * modules while using the NAND booting code with the fixed SDRAM setup!
  */
 void early_sdram_init(void)
 {
diff --git a/nand_spl/board/amcc/kilauea/Makefile b/nand_spl/board/amcc/kilauea/Makefile
new file mode 100644
index 000000000..84bd29824
--- /dev/null
+++ b/nand_spl/board/amcc/kilauea/Makefile
@@ -0,0 +1,108 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS	= -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS	+= -DCONFIG_NAND_SPL
+CFLAGS	+= -DCONFIG_NAND_SPL
+
+SOBJS	= start.o init.o resetvec.o cache.o
+COBJS	= memory.o nand_boot.o nand_ecc.o ndfc.o
+
+SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS	:= $(SOBJS) $(COBJS)
+LNDIR	:= $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj	:= $(OBJTREE)/nand_spl/
+
+ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all:	$(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl
+	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl:	$(OBJS)
+	cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+		-Map $(nandobj)u-boot-spl.map \
+		-o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)cache.S:
+	@rm -f $(obj)cache.S
+	ln -s $(SRCTREE)/cpu/ppc4xx/cache.S $(obj)cache.S
+
+$(obj)ndfc.c:
+	@rm -f $(obj)ndfc.c
+	ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c
+
+$(obj)resetvec.S:
+	@rm -f $(obj)resetvec.S
+	ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+
+$(obj)start.S:
+	@rm -f $(obj)start.S
+	ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
+
+# from board directory
+$(obj)init.S:
+	@rm -f $(obj)init.S
+	ln -s $(SRCTREE)/board/amcc/kilauea/init.S $(obj)init.S
+
+$(obj)memory.c:
+	@rm -f $(obj)memory.c
+	ln -s $(SRCTREE)/board/amcc/kilauea/memory.c $(obj)memory.c
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+	@rm -f $(obj)nand_boot.c
+	ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+
+# from drivers/nand directory
+$(obj)nand_ecc.c:
+	@rm -f $(obj)nand_ecc.c
+	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
+
+#########################################################################
+
+$(obj)%.o:	$(obj)%.S
+	$(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o:	$(obj)%.c
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/amcc/kilauea/config.mk b/nand_spl/board/amcc/kilauea/config.mk
new file mode 100644
index 000000000..22490918d
--- /dev/null
+++ b/nand_spl/board/amcc/kilauea/config.mk
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 405EX Reference Platform (Kilauea) board
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff,
+# in the last 4kBytes of memory space in cache.
+# We will copy this SPL into instruction-cache in start.S. So we set
+# TEXT_BASE to starting address in i-cache here.
+#
+TEXT_BASE = 0x00800000
+
+# PAD_TO used to generate a 16kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 0x4000
+PAD_TO	= 0x00804000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/nand_spl/board/amcc/kilauea/u-boot.lds b/nand_spl/board/amcc/kilauea/u-boot.lds
new file mode 100644
index 000000000..24df32d02
--- /dev/null
+++ b/nand_spl/board/amcc/kilauea/u-boot.lds
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc:common)
+SECTIONS
+{
+  .resetvec 0x00800FFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .text      :
+  {
+    start.o	(.text)
+    init.o	(.text)
+    nand_boot.o	(.text)
+    ndfc.o	(.text)
+
+    *(.text)
+    *(.fixup)
+  }
+  _etext = .;
+
+  .data    :
+  {
+    *(.rodata*)
+    *(.data*)
+    *(.sdata*)
+    __got2_start = .;
+    *(.got2)
+    __got2_end = .;
+  }
+
+  _edata  =  .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss)
+   *(.bss)
+  }
+
+  _end = . ;
+}
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index ec1be5a76..78bf071f5 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -88,7 +88,7 @@ $(obj)nand_boot.c:
 # from drivers/nand directory
 $(obj)nand_ecc.c:
 	@rm -f $(obj)nand_ecc.c
-	ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c
+	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
 
 #########################################################################
 
diff --git a/net/Makefile b/net/Makefile
index d18460cab..0eee330cf 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -27,8 +27,15 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)libnet.a
 
-COBJS	= net.o tftp.o bootp.o rarp.o eth.o nfs.o sntp.o
-
+COBJS-y += net.o
+COBJS-y += tftp.o
+COBJS-y += bootp.o
+COBJS-y += rarp.o
+COBJS-y += eth.o
+COBJS-y += nfs.o
+COBJS-y += sntp.o
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/net/bootp.c b/net/bootp.c
index 55dcc81db..89e30d2c7 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -33,7 +33,7 @@
 
 #if defined(CONFIG_CMD_NET)
 
-#define TIMEOUT		5		/* Seconds before trying BOOTP again	*/
+#define TIMEOUT		5UL		/* Seconds before trying BOOTP again	*/
 #ifndef CONFIG_NET_RETRY_COUNT
 # define TIMEOUT_COUNT	5		/* # of timeouts before giving up  */
 #else
diff --git a/net/bootp.h b/net/bootp.h
index ba9826e91..320cc3bd3 100644
--- a/net/bootp.h
+++ b/net/bootp.h
@@ -88,7 +88,7 @@ typedef enum { INIT,
 #define DHCP_NAK      6
 #define DHCP_RELEASE  7
 
-#define SELECT_TIMEOUT 3	/* Seconds to wait for offers */
+#define SELECT_TIMEOUT 3UL	/* Seconds to wait for offers */
 
 /**********************************************************************/
 
diff --git a/net/eth.c b/net/eth.c
index e7f122059..1b56a356c 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -54,6 +54,7 @@ extern int rtl8169_initialize(bd_t*);
 extern int scc_initialize(bd_t*);
 extern int skge_initialize(bd_t*);
 extern int tsi108_eth_initialize(bd_t*);
+extern int uli526x_initialize(bd_t *);
 extern int tsec_initialize(bd_t*, int, char *);
 extern int npe_initialize(bd_t *);
 extern int uec_initialize(int);
@@ -238,6 +239,9 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_TSI108_ETH)
 	tsi108_eth_initialize(bis);
 #endif
+#if defined(CONFIG_ULI526X)
+	uli526x_initialize(bis);
+#endif
 #if defined(CONFIG_RTL8139)
 	rtl8139_initialize(bis);
 #endif
diff --git a/net/net.c b/net/net.c
index cde26801b..c719bc4c0 100644
--- a/net/net.c
+++ b/net/net.c
@@ -94,7 +94,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define ARP_TIMEOUT		5		/* Seconds before trying ARP again */
+#define ARP_TIMEOUT		5UL		/* Seconds before trying ARP again */
 #ifndef	CONFIG_NET_RETRY_COUNT
 # define ARP_TIMEOUT_COUNT	5		/* # of timeouts before giving up  */
 #else
@@ -589,7 +589,7 @@ void NetStartAgain (void)
 		return;
 	}
 #ifndef CONFIG_NET_MULTI
-	NetSetTimeout (10 * CFG_HZ, startAgainTimeout);
+	NetSetTimeout (10UL * CFG_HZ, startAgainTimeout);
 	NetSetHandler (startAgainHandler);
 #else	/* !CONFIG_NET_MULTI*/
 	eth_halt ();
@@ -598,7 +598,7 @@ void NetStartAgain (void)
 	if (NetRestartWrap) {
 		NetRestartWrap = 0;
 		if (NetDevExists && !once) {
-			NetSetTimeout (10 * CFG_HZ, startAgainTimeout);
+			NetSetTimeout (10UL * CFG_HZ, startAgainTimeout);
 			NetSetHandler (startAgainHandler);
 		} else {
 			NetState = NETLOOP_FAIL;
@@ -774,7 +774,7 @@ static void PingStart(void)
 #if defined(CONFIG_NET_MULTI)
 	printf ("Using %s device\n", eth_get_name());
 #endif	/* CONFIG_NET_MULTI */
-	NetSetTimeout (10 * CFG_HZ, PingTimeout);
+	NetSetTimeout (10UL * CFG_HZ, PingTimeout);
 	NetSetHandler (PingHandler);
 
 	PingSend();
diff --git a/net/nfs.c b/net/nfs.c
index 1b27c977c..aa8d612e5 100644
--- a/net/nfs.c
+++ b/net/nfs.c
@@ -34,7 +34,7 @@
 #if defined(CONFIG_CMD_NET) && defined(CONFIG_CMD_NFS)
 
 #define HASHES_PER_LINE 65	/* Number of "loading" hashes per line	*/
-#define NFS_TIMEOUT 60
+#define NFS_TIMEOUT 60UL
 
 static int fs_mounted = 0;
 static unsigned long rpc_id = 0;
diff --git a/net/rarp.c b/net/rarp.c
index 21dfa529c..ecf38e4ee 100644
--- a/net/rarp.c
+++ b/net/rarp.c
@@ -31,7 +31,7 @@
 
 #if defined(CONFIG_CMD_NET)
 
-#define TIMEOUT		5		/* Seconds before trying BOOTP again */
+#define TIMEOUT		5UL		/* Seconds before trying BOOTP again */
 #ifndef	CONFIG_NET_RETRY_COUNT
 # define TIMEOUT_COUNT	5		/* # of timeouts before giving up  */
 #else
diff --git a/net/tftp.c b/net/tftp.c
index 5ee767646..8b95bcfec 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -15,7 +15,7 @@
 #if defined(CONFIG_CMD_NET)
 
 #define WELL_KNOWN_PORT	69		/* Well known TFTP port #		*/
-#define TIMEOUT		5		/* Seconds to timeout for a lost pkt	*/
+#define TIMEOUT		5UL		/* Seconds to timeout for a lost pkt	*/
 #ifndef	CONFIG_NET_RETRY_COUNT
 # define TIMEOUT_COUNT	10		/* # of timeouts before giving up  */
 #else
diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile
index f1034dac2..e3f44b777 100644
--- a/post/cpu/ppc4xx/Makefile
+++ b/post/cpu/ppc4xx/Makefile
@@ -24,6 +24,6 @@
 LIB	= libpostppc4xx.a
 
 AOBJS   = cache_4xx.o
-COBJS	= cache.o ether.o fpu.o spr.o uart.o watchdog.o
+COBJS	= cache.o denali_ecc.o ether.o fpu.o spr.o uart.o watchdog.o
 
 include $(TOPDIR)/post/rules.mk
diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c
index 109ca1fbd..c86a15069 100644
--- a/post/cpu/ppc4xx/cache.c
+++ b/post/cpu/ppc4xx/cache.c
@@ -51,8 +51,6 @@ int cache_post_test4 (int tlb, void *p, int size);
 int cache_post_test5 (int tlb, void *p, int size);
 int cache_post_test6 (int tlb, void *p, int size);
 
-static int tlb = -1;		/* index to the victim TLB entry */
-
 #ifdef CONFIG_440
 static unsigned char testarea[CACHE_POST_SIZE]
 __attribute__((__aligned__(CACHE_POST_SIZE)));
@@ -60,9 +58,10 @@ __attribute__((__aligned__(CACHE_POST_SIZE)));
 
 int cache_post_test (int flags)
 {
-	void* virt = (void*)CFG_POST_CACHE_ADDR;
+	void *virt = (void *)CFG_POST_CACHE_ADDR;
 	int ints;
 	int res = 0;
+	int tlb = -1;		/* index to the victim TLB entry */
 
 	/*
 	 * All 44x variants deal with cache management differently
@@ -73,25 +72,23 @@ int cache_post_test (int flags)
 #ifdef CONFIG_440
 	int word0, i;
 
-	if (tlb < 0) {
-		/*
-		 * Allocate a new TLB entry, since we are going to modify
-		 * the write-through and caching inhibited storage attributes.
-		 */
-		program_tlb((u32)testarea, (u32)virt,
-			    CACHE_POST_SIZE, TLB_WORD2_I_ENABLE);
-
-		/* Find the TLB entry */
-		for (i = 0;; i++) {
-			if (i >= PPC4XX_TLB_SIZE) {
-				printf ("Failed to program tlb entry\n");
-				return -1;
-			}
-			word0 = mftlb1(i);
-			if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) {
-				tlb = i;
-				break;
-			}
+	/*
+	 * Allocate a new TLB entry, since we are going to modify
+	 * the write-through and caching inhibited storage attributes.
+	 */
+	program_tlb((u32)testarea, (u32)virt, CACHE_POST_SIZE,
+		    TLB_WORD2_I_ENABLE);
+
+	/* Find the TLB entry */
+	for (i = 0;; i++) {
+		if (i >= PPC4XX_TLB_SIZE) {
+			printf ("Failed to program tlb entry\n");
+			return -1;
+		}
+		word0 = mftlb1(i);
+		if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) {
+			tlb = i;
+			break;
 		}
 	}
 #endif
@@ -119,6 +116,10 @@ int cache_post_test (int flags)
 	if (ints)
 		enable_interrupts ();
 
+#ifdef CONFIG_440
+	remove_tlb((u32)virt, CACHE_POST_SIZE);
+#endif
+
 	return res;
 }
 
diff --git a/post/board/lwmon5/ecc.c b/post/cpu/ppc4xx/denali_ecc.c
index 3fa3ba624..77234838d 100644
--- a/post/board/lwmon5/ecc.c
+++ b/post/cpu/ppc4xx/denali_ecc.c
@@ -31,7 +31,7 @@
 #include <common.h>
 #include <watchdog.h>
 
-#ifdef CONFIG_POST
+#if defined(CONFIG_POST) && (defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
 
 #include <post.h>
 
@@ -47,12 +47,10 @@
 #include <asm/io.h>
 #include <ppc440.h>
 
-#include "../../../board/lwmon5/sdram.h"
-
 DECLARE_GLOBAL_DATA_PTR;
 
 const static unsigned char syndrome_codes[] = {
-	0xF4, 0XF1, 0XEC ,0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
+	0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
 	0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB,
 	0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2,
 	0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A,
@@ -65,9 +63,9 @@ const static unsigned char syndrome_codes[] = {
 
 #define ECC_START_ADDR		0x10
 #define ECC_STOP_ADDR		0x2000
-#define ECC_PATTERN		0x0101010101010101ull
-#define ECC_PATTERN_CORR	0x0101010101010100ull
-#define ECC_PATTERN_UNCORR	0x010101010101010Full
+#define ECC_PATTERN		0x01010101
+#define ECC_PATTERN_CORR	0x11010101
+#define ECC_PATTERN_UNCORR	0xF1010101
 
 static int test_ecc_error(void)
 {
@@ -152,68 +150,78 @@ static int test_ecc_error(void)
 
 static int test_ecc(unsigned long ecc_addr)
 {
-	volatile unsigned long long *ecc_mem;
 	unsigned long value;
-	unsigned long ecc_data;
-	volatile unsigned long *lecc_mem;
-	int pret, ret = 0;
+	volatile unsigned *const ecc_mem = (volatile unsigned *) ecc_addr;
+	int pret;
+	int ret = 0;
 
 	sync();
 	eieio();
 	WATCHDOG_RESET();
 
-	ecc_mem = (unsigned long long *)ecc_addr;
-	lecc_mem = (ulong *)ecc_addr;
-	*ecc_mem = ECC_PATTERN;
+	debug("Entering test_ecc(0x%08lX)\n", ecc_addr);
+	out_be32(ecc_mem, ECC_PATTERN);
+	out_be32(ecc_mem + 1, ECC_PATTERN);
+	in_be32(ecc_mem);
 	pret = test_ecc_error();
-	if (pret != 0)
+	if (pret != 0) {
+		debug("pret: expected 0, got %d\n", pret);
 		ret = 1;
-
-	/* disconnect ecc */
+	}
+	/* test for correctable error */
+	/* disconnect from ecc storage */
 	mfsdram(DDR0_22, value);
-	mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK)
+	mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
 		| DDR0_22_CTRL_RAW_ECC_DISABLE);
 
-	/* injecting error */
-	*ecc_mem = ECC_PATTERN_CORR;
+	/* creating (correctable) single-bit error */
+	out_be32(ecc_mem, ECC_PATTERN_CORR);
 
 	/* enable ecc */
 	mfsdram(DDR0_22, value);
-	mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK)
+	mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
 		| DDR0_22_CTRL_RAW_ECC_ENABLE);
+	sync();
+	eieio();
 
-	ecc_data = *lecc_mem;
+	in_be32(ecc_mem);
 	pret = test_ecc_error();
 	/* if read data ok, 1 correctable error must be fixed */
-	if (pret != 3)
+	if (pret != 3) {
+		debug("pret: expected 3, got %d\n", pret);
 		ret = 1;
-
+	}
 	/* test for uncorrectable error */
 	/* disconnect from ecc storage */
 	mfsdram(DDR0_22, value);
-	mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK)
+	mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
 		| DDR0_22_CTRL_RAW_NO_ECC_RAM);
 
-	/* injecting multiply bit error */
-
-	*ecc_mem = ECC_PATTERN_UNCORR;
+	/* creating (uncorrectable) multiple-bit error */
+	out_be32(ecc_mem, ECC_PATTERN_UNCORR);
 
 	/* enable ecc */
 	mfsdram(DDR0_22, value);
-	mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK)
+	mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
 		| DDR0_22_CTRL_RAW_ECC_ENABLE);
+	sync();
+	eieio();
 
-	ecc_data = *lecc_mem;
-	/* what the data should be read? */
-
+	in_be32(ecc_mem);
 	pret = test_ecc_error();
 	/* info about uncorrectable error must appear */
-	if (pret != 5)
+	if (pret != 5) {
+		debug("pret: expected 5, got %d\n", pret);
 		ret = 1;
+	}
+	/* remove error from SDRAM */
+	out_be32(ecc_mem, ECC_PATTERN);
+	/* clear error caused by read-modify-write */
+	mfsdram(DDR0_00, value);
+	mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
 
 	sync();
 	eieio();
-
 	return ret;
 }
 
@@ -223,45 +231,37 @@ int ecc_post_test (int flags)
 	unsigned long value;
 	unsigned long iaddr;
 
-#if CONFIG_DDR_ECC
 	sync();
 	eieio();
 
+	mfsdram(DDR0_22, value);
+	if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) {
+		debug("SDRAM ECC not enabled, skipping ECC POST.\n");
+		return 0;
+	}
+
 	/* mask all int */
 	mfsdram(DDR0_01, value);
-	mtsdram(DDR0_01, (value &~ DDR0_01_INT_MASK_MASK)
+	mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK)
 		| DDR0_01_INT_MASK_ALL_OFF);
 
 	/* clear error status */
 	mfsdram(DDR0_00, value);
 	mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
 
-	/* enable full support of ECC */
-	mfsdram(DDR0_22, value);
-	mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK)
-		| DDR0_22_CTRL_RAW_ECC_ENABLE);
-
-	for (iaddr = ECC_START_ADDR; iaddr < ECC_STOP_ADDR; iaddr += iaddr) {
+	for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) {
 		ret = test_ecc(iaddr);
 		if (ret)
 			break;
 	}
-
-	/* clear error status */
-	mfsdram(DDR0_00, value);
-	mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
-
 	/*
 	 * Clear possible errors resulting from ECC testing.
 	 * If not done, then we could get an interrupt later on when
 	 * exceptions are enabled.
 	 */
 	set_mcsr(get_mcsr());
-#endif
-
 	return ret;
 
 }
-
 #endif /* CONFIG_POST & CFG_POST_ECC */
-#endif /* CONFIG_POST */
+#endif /* defined(CONFIG_POST) && ... */
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
index ab23ca5a3..4ac749134 100644
--- a/post/cpu/ppc4xx/ether.c
+++ b/post/cpu/ppc4xx/ether.c
@@ -52,6 +52,28 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/*
+ * Get count of EMAC devices (doesn't have to be the max. possible number
+ * supported by the cpu)
+ *
+ * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
+ * EMAC count is possible. As it is needed for the Kilauea/Haleakala
+ * 405EX/405EXr eval board, using the same binary.
+ */
+#if defined(CONFIG_BOARD_EMAC_COUNT)
+#define LAST_EMAC_NUM	board_emac_count()
+#else /* CONFIG_BOARD_EMAC_COUNT */
+#if defined(CONFIG_HAS_ETH3)
+#define LAST_EMAC_NUM	4
+#elif defined(CONFIG_HAS_ETH2)
+#define LAST_EMAC_NUM	3
+#elif defined(CONFIG_HAS_ETH1)
+#define LAST_EMAC_NUM	2
+#else
+#define LAST_EMAC_NUM	1
+#endif
+#endif /* CONFIG_BOARD_EMAC_COUNT */
+
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define SDR0_MFR_ETH_CLK_SEL_V(n)	((0x01<<27) / (n+1))
 #endif
@@ -65,6 +87,8 @@ static volatile mal_desc_t rx __cacheline_aligned;
 static char *tx_buf;
 static char *rx_buf;
 
+int board_emac_count(void);
+
 static void ether_post_init (int devnum, int hw_addr)
 {
 	int i;
@@ -93,11 +117,11 @@ static void ether_post_init (int devnum, int hw_addr)
 	sync ();
 #endif
 	/* reset emac */
-	out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+	out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST);
 	sync ();
 
 	for (i = 0;; i++) {
-		if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST))
+		if (!(in_be32 ((void*)(EMAC_M0 + hw_addr)) & EMAC_M0_SRST))
 			break;
 		if (i >= 1000) {
 			printf ("Timeout resetting EMAC\n");
@@ -120,7 +144,7 @@ static void ether_post_init (int devnum, int hw_addr)
 	else
 		mode_reg |= EMAC_M1_OBCI_GT100;
 
-	out32 (EMAC_M1 + hw_addr, mode_reg);
+	out_be32 ((void*)(EMAC_M1 + hw_addr), mode_reg);
 
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
 
@@ -145,6 +169,8 @@ static void ether_post_init (int devnum, int hw_addr)
 	rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
 	rx.data_len = 0;
 	rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
+	flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
+	flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
 
 	switch (devnum) {
 	case 1:
@@ -186,40 +212,40 @@ static void ether_post_init (int devnum, int hw_addr)
 
 	/* set internal loopback mode */
 #ifdef CFG_POST_ETHER_EXT_LOOPBACK
-	out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | 0 |
-	       EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
-	       EMAC_M1_MF_100MBPS | EMAC_M1_IST |
-	       in32 (EMAC_M1));
+	out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | 0 |
+		  EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+		  EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+		  in_be32 ((void*)(EMAC_M1 + hw_addr)));
 #else
-	out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE |
-	       EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
-	       EMAC_M1_MF_100MBPS | EMAC_M1_IST |
-	       in32 (EMAC_M1));
+	out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | EMAC_M1_ILE |
+		  EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+		  EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+		  in_be32 ((void*)(EMAC_M1 + hw_addr)));
 #endif
 
 	/* set transmit enable & receive enable */
-	out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
+	out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_TXE | EMAC_M0_RXE);
 
 	/* enable broadcast address */
-	out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE);
+	out_be32 ((void*)(EMAC_RXM + hw_addr), EMAC_RMR_BAE);
 
 	/* set transmit request threshold register */
-	out32 (EMAC_TRTR + hw_addr, 0x18000000);	/* 256 byte threshold */
+	out_be32 ((void*)(EMAC_TRTR + hw_addr), 0x18000000);	/* 256 byte threshold */
 
 	/* set receive	low/high water mark register */
 #if defined(CONFIG_440)
 	/* 440s has a 64 byte burst length */
-	out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000);
+	out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x80009000);
 #else
 	/* 405s have a 16 byte burst length */
-	out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000);
+	out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x0f002000);
 #endif /* defined(CONFIG_440) */
-	out32 (EMAC_TXM1 + hw_addr, 0xf8640000);
+	out_be32 ((void*)(EMAC_TXM1 + hw_addr), 0xf8640000);
 
 	/* Set fifo limit entry in tx mode 0 */
-	out32 (EMAC_TXM0 + hw_addr, 0x00000003);
+	out_be32 ((void*)(EMAC_TXM0 + hw_addr), 0x00000003);
 	/* Frame gap set */
-	out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008);
+	out_be32 ((void*)(EMAC_I_FRAME_GAP_REG + hw_addr), 0x00000008);
 	sync ();
 }
 
@@ -246,7 +272,7 @@ static void ether_post_halt (int devnum, int hw_addr)
 		udelay (1000);
 	}
 	/* emac reset */
-	out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+	out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST);
 
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	/* remove clocks for EMAC internal loopback  */
@@ -266,14 +292,17 @@ static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
 			return;
 		}
 		udelay (1000);
+		invalidate_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
 	}
 	tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
 		EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
 	tx.data_len = length;
 	memcpy (tx.data_ptr, packet, length);
+	flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
+	flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length);
 	sync ();
 
-	out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0);
+	out_be32 ((void*)(EMAC_TXM0 + hw_addr), in_be32 ((void*)(EMAC_TXM0 + hw_addr)) | EMAC_TXM0_GNP0);
 	sync ();
 }
 
@@ -288,13 +317,17 @@ static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_lengt
 			return 0;
 		}
 		udelay (1000);
+		invalidate_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
 	}
 	length = rx.data_len - 4;
-	if (length <= max_length)
+	if (length <= max_length) {
+		invalidate_dcache_range((u32)rx.data_ptr, (u32)rx.data_ptr + length);
 		memcpy(packet, rx.data_ptr, length);
+	}
 	sync ();
 
 	rx.ctrl |= MAL_RX_CTRL_EMPTY;
+	flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
 	sync ();
 
 	return length;
@@ -372,6 +405,7 @@ Done:
 int ether_post_test (int flags)
 {
 	int res = 0;
+	int i;
 
 	/* Allocate tx & rx packet buffers */
 	tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
@@ -383,13 +417,10 @@ int ether_post_test (int flags)
 		goto out_free;
 	}
 
-	/* EMAC0 */
-	if (test_ctlr (0, 0))
-		res = -1;
-
-	/* EMAC1 */
-	if (test_ctlr (1, 0x100))
-		res = -1;
+	for (i = 0; i < LAST_EMAC_NUM; i++) {
+		if (test_ctlr (i, i*0x100))
+			res = -1;
+	}
 
 out_free:
 	free (tx_buf);
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
index 7c3ed402c..f47b48e9d 100644
--- a/post/cpu/ppc4xx/uart.c
+++ b/post/cpu/ppc4xx/uart.c
@@ -101,6 +101,17 @@
 #define UCR0_UDIV_POS   0
 #define UCR1_UDIV_POS   8
 #define UDIV_MAX        127
+#elif defined(CONFIG_405EX)
+#define UART0_BASE	0xef600200
+#define UART1_BASE	0xef600300
+#define CR0_MASK	0x000000ff
+#define CR0_EXTCLK_ENA	0x00800000
+#define CR0_UDIV_POS	0
+#define UDIV_SUBTRACT	0
+#define UART0_SDR	sdr_uart0
+#define UART1_SDR	sdr_uart1
+#define MFREG(a, d)	mfsdr(a, d)
+#define MTREG(a, d)	mtsdr(a, d)
 #else /* CONFIG_405GP || CONFIG_405CR */
 #define UART0_BASE      0xef600300
 #define UART1_BASE      0xef600400
@@ -137,7 +148,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
 #if !defined(CFG_EXT_SERIAL_CLOCK)
 static void serial_divs (int baudrate, unsigned long *pudiv,
 			 unsigned short *pbdiv)
@@ -183,7 +194,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
 
 static int uart_post_init (unsigned long dev_base)
 {
-	unsigned long reg;
+	unsigned long reg = 0;
 	unsigned long udiv;
 	unsigned short bdiv;
 	volatile char val;
diff --git a/post/lib_ppc/cpu.c b/post/lib_ppc/cpu.c
index 1f2ded2bf..4ab6d2dc0 100644
--- a/post/lib_ppc/cpu.c
+++ b/post/lib_ppc/cpu.c
@@ -36,6 +36,7 @@
 
 #include <watchdog.h>
 #include <post.h>
+#include <asm/mmu.h>
 
 #if CONFIG_POST & CFG_POST_CPU
 
@@ -59,6 +60,8 @@ extern int cpu_post_test_multi (void);
 extern int cpu_post_test_string (void);
 extern int cpu_post_test_complex (void);
 
+DECLARE_GLOBAL_DATA_PTR;
+
 ulong cpu_post_makecr (long v)
 {
 	ulong cr = 0;
@@ -81,6 +84,10 @@ int cpu_post_test (int flags)
 	WATCHDOG_RESET();
 	if (ic)
 		icache_disable ();
+#ifdef CONFIG_4xx_DCACHE
+	/* disable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
 
 	if (ret == 0)
 		ret = cpu_post_test_cmp ();
@@ -129,6 +136,10 @@ int cpu_post_test (int flags)
 
 	if (ic)
 		icache_enable ();
+#ifdef CONFIG_4xx_DCACHE
+	/* enable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
 
 	WATCHDOG_RESET();
 
diff --git a/sh_config.mk b/sh_config.mk
new file mode 100644
index 000000000..49d50f7eb
--- /dev/null
+++ b/sh_config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000-2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
diff --git a/tools/.gitignore b/tools/.gitignore
new file mode 100644
index 000000000..c33679a9d
--- /dev/null
+++ b/tools/.gitignore
@@ -0,0 +1,9 @@
+/bmp_logo
+/crc32.c
+/envcrc
+/environment.c
+/gen_eth_addr
+/img2srec
+/mkimage
+/sha1.c
+/ubsha1
diff --git a/tools/scripts/define2mk.sed b/tools/scripts/define2mk.sed
new file mode 100644
index 000000000..6464627ea
--- /dev/null
+++ b/tools/scripts/define2mk.sed
@@ -0,0 +1,29 @@
+#
+# Sed script to parse CPP macros and generate output usable by make
+#
+# It is expected that this script is fed the output of 'gpp -dM'
+# which preprocesses the common.h header files and outputs the final
+# list of CPP macros (and whitespace is sanitized)
+#
+
+# Only process values prefixed with #define CONFIG_
+/^#define CONFIG_[A-Za-z0-9_]\+/ {
+	# Strip the #define prefix
+	s/#define *//;
+	# Change to form CONFIG_*=VALUE
+	s/ \+/=/;
+	# Drop trailing spaces
+	s/ *$//;
+	# drop quotes around string values
+	s/="\(.*\)"$/=\1/;
+	# Concatenate string values
+	s/" *"//g;
+	# Wrap non-numeral values with quotes
+	s/=\(.*\?[^0-9].*\)$/=\"\1\"/;
+	# Change '1' and empty values to "y" (not perfect, but
+	# supports conditional compilation in the makefiles
+	s/=$/=y/;
+	s/=1$/=y/;
+	# print the line
+	p
+}