diff options
269 files changed, 14164 insertions, 5025 deletions
@@ -1,3 +1,689 @@ +commit 5f6c732affea9647762d27a4617a2ae64c52dceb +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 18 16:17:46 2007 +0200 + + Update CHANGELOG + +commit ad4eb555671d97f96dc56eab55103b1f86874b01 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 18 14:30:39 2007 +0200 + + MCC200 board: remove warning which is obsolete after PSoC firmware changes + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 3747a3f010b2b1442dec3e871c69788b6017aaae +Author: Domen Puncer <domen.puncer@telargo.com> +Date: Wed Apr 18 12:11:05 2007 +0200 + + [PATCH] icecube/lite5200b: document wakeup from low-power support + + Signed-off-by: Domen Puncer <domen.puncer@telargo.com> + +commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 18 12:07:47 2007 +0200 + + ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 18 12:05:59 2007 +0200 + + ppc4xx: Add output for bootrom location to 405EZ ports + + Now 405EZ ports also show upon bootup from which boot device + they are configured to boot: + + U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) + + CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) + Bootstrap Option E - Boot ROM Location EBC (32 bits) + 16 kB I-Cache 16 kB D-Cache + Board: Acadia - AMCC PPC405EZ Evaluation Board + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 +Author: Domen Puncer <domen.puncer@telargo.com> +Date: Mon Apr 16 14:00:13 2007 +0200 + + [PATCH] icecube/lite5200b: wakeup from low-power support + + U-Boot part of Lite5200b low power mode support. + Puts SDRAM out of self-refresh and transfers control to + address saved at physical 0x0. + + Signed-off-by: Domen Puncer <domen.puncer@telargo.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit 8048cdd56f04a756eeea4951f402bf5cc33785db +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Apr 14 21:16:54 2007 +0200 + + Update CHANGELOG + +commit 8e6875183cdca91c134408d119d4abcd48ef6856 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 18:56:46 2006 +0100 + + AVR32: Enable MMC support + + Set up the portmux for the MMC interface and enable the MMC driver + along with support for DOS partitions, ext2 and FAT filesystems. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit fc26c97bb6df41b4a95662c34054fe912387bf38 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Fri Jan 20 10:03:53 2006 +0100 + + Atmel MCI driver + + Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs. + + The AT91 ARM-based CPUs use basically the same hardware, so it should + be possible to share this driver, but no effort has been made so far. + + Hardware documentation can be found in the AT32AP7000 data sheet, + which can be downloaded from + + http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 18:55:37 2006 +0100 + + AVR32: Add clk and gpio infrastructure for mmci + + Implement functions for configuring the mmci pins, as well as + functions for getting the clock rate of the mmci controller. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 7fac3f69e9f05c5e5326681976c35d129324c4de +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 18:53:56 2006 +0100 + + Enable partition support with MMC + + Include implementations of init_part() and get_partition_info() when + CONFIG_MMC is set. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 17:14:30 2006 +0100 + + AVR32: Enable networking + + Implement MACB initialization for AVR32 and ATSTK1000, and turn + everything on, including the MACB driver. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Fri Jan 20 10:03:34 2006 +0100 + + Atmel MACB ethernet driver + + Driver for the Atmel MACB on-chip ethernet controller. + + This driver has been tested on the ATSTK1000 board with a AT32AP7000 + CPU. It should probably work on AT91SAM926x as well with some minor + modifications. + + Hardware documentation can be found in the AT32AP7000 data sheet, + which can be downloaded from + + http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 16:56:14 2006 +0100 + + AVR32: Add clk and gpio infrastructure for macb0 and macb1 + + Implement functions for configuring the macb0 and macb1 pins, as + well as functions for getting the clock rate of the various + busses the macb ethernet controllers are connected to. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit d5acb95b16a0a74c643524342c3437e765426d05 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 15:39:15 2006 +0100 + + AVR32: Implement simple DMA memory allocator + + Implement dma_alloc_coherent() which returns cache-aligned + uncacheable memory. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 91975b0fea773c9e681fea8cf3349669f27685ee +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 15:46:02 2006 +0100 + + Import <linux/mii.h> from the Linux kernel + + Instead of creating yet another set of MII register definitions + in the macb driver, here's a complete set of definitions for everyone + to use. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 1b804b229556a4d862da93c0ec94e79419364b2c +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Wed Mar 21 19:47:36 2007 +0100 + + AVR32: Include more commands for ATSTK1000 + + Include the imi, imls and jffs commands sets by default on ATSTK1000. + Also define CONFIG_BOOTARGS to something more useful, define + CONFIG_BOOTCOMMAND and enable autoboot by default. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Wed Mar 21 19:44:48 2007 +0100 + + AVR32: Provide a definition of struct stat + + Copy the definition of struct stat from the Linux kernel. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 12f099c08167a7a51aeee623bc16dafd0841271c +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Dec 17 14:46:06 2006 +0100 + + AVR32: Use initdram() instead of board_init_memories() + + Conform to the "standard" interface and use initdram() instead of + board_init_memories() on AVR32. This enables us to get rid of the + sdram_size member of the global_data struct as well. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Mon Nov 20 15:53:10 2006 +0100 + + AVR32: Relocate u-boot to SDRAM + + Relocate the u-boot image into SDRAM like everyone else does. This + means that we can handle much larger .data and .bss than we used to. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit df548d3c3e2bbc40258713167859ffc2ce99a900 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sun Nov 19 18:06:53 2006 +0100 + + AVR32: Resource management rewrite + + Rewrite the resource management code (i.e. I/O memory, clock gating, + gpio) so it doesn't depend on any global state. This is necessary + because this code is heavily used before relocation to RAM, so we + can't write to any global variables. + + As an added bonus, this makes u-boot's memory footprint a bit smaller, + although some functionality has been left out; all clocks are enabled + all the time, and there's no checking for gpio line conflicts. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sat Nov 18 18:01:13 2006 +0100 + + AVR32: Clean up memory-map.h for at32ap7000 + + Convert spaces to tabs (must have missed this one last time around), + sort the entries by address and group them together by bus + connectivity. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 28c699ef69f4b6cdf252e4747b7b590028a88981 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sat Nov 18 17:32:31 2006 +0100 + + AVR32: Build position-independent u-boot + + Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot + position independent. This will make relocation a lot easier. + + -mno-init-got means that gcc shouldn't emit code to load the GOT + address into r6 in every function prologue. We do it once and for + all in the early startup assembly code, so enabling this option + makes u-boot a bit faster and smaller. + + The assembly parts have always been position-independent, so no code + changes should be necessary. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 5374b36de91d006d1df9536259fa9f66b01aa3aa +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sat Nov 18 17:24:31 2006 +0100 + + AVR32: Use avr32-linux- cross-compilation prefix by default + + It doesn't really matter which toolchain you use to compile u-boot, + but the avr32-linux one is probably what most people have installed. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit c841beeddebece0039e724fb27f4d1a39ee1c6b6 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Sat Nov 18 17:15:30 2006 +0100 + + AVR32: Split start_u_boot into board_init_f and board_init_r + + Split the avr32 initialization code into a function to run before + relocation, board_init_f and a function to run after relocation, + board_init_r. For now, board_init_f simply calls board_init_r + at the end. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Sat Apr 14 05:26:48 2007 +0200 + + [Fix] Set the LED status register on the UC101 for the LXT971 PHY. + clear the Display after reset. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 7882751c78b7ecabfd49b0eff8de27661c71f16c +Author: Denis Peter <d.peter@mpl.ch> +Date: Fri Apr 13 09:13:33 2007 +0200 + + [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c + + Fix bug introduced by "Fix get_partition_info() parameter error in all + other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented + to use diskboot or scsiboot form another device than 0. + + Signed-off-by: Denis Peter <d.peter@mpl.ch> + +commit 0b94504d22e70f537c17a0d38c87edb6e370977d +Author: Greg Lopp <lopp@pobox.com> +Date: Fri Apr 13 08:02:24 2007 +0200 + + [PATCH] Fix use of "void *" for block dev read/write buffer pointers + + Signed-of-by: Greg Lopp <lopp@pobox.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Thu Apr 12 14:15:59 2007 +0200 + + ppc4xx: Fix i2c divisor calcularion for PPC4xx + + This patch fixes changes the i2c_init(...) function to use the function + get_OPB_freq() rather than calculating the OPB speed by + sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is + specific per processor. The prior method was not and so was calculating + the wrong speed for some PPC4xx processors. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6c9ba919375db977aaad9146bf320c7afd07ae7a +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 11 17:25:01 2007 +0200 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 51056dd9863e6a1bc363afbbe1775c58cd967418 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 11 17:22:55 2007 +0200 + + Update for SC3 board + + * Make IDE timeout configurable through ide_reset_timeout variable. + * Use Newline as "password" string + * Use just a single partition in NAND flash + +commit c0707ce65677650b5ceab0500ee50ae5168afef2 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:34:06 2007 +0800 + + [Blackfin][PATCH] Kill off a bunch of common local prototypes + +commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:33:04 2007 +0800 + + [Blackfin][PATCH] Fix dynamic CPLB generation issue + +commit 0445e3a264251d75b1be45ef713c70726a2952f0 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:31:47 2007 +0800 + + [Blackfin][PATCH] minior cleanup + +commit 155fd766573981090e638b493d5857562151862e +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:31:18 2007 +0800 + + [Blackfin][PATCH] Fix copyright and update license + +commit 9fd437bbd75d282f899e1da50be20a2bf38450bc +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:30:25 2007 +0800 + + [Blackfin][PATCH] Add BF537 EMAC driver initialization + +commit 889256e8604e0c68db1d866d720894dffede9df6 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:29:55 2007 +0800 + + [Blackfin][PATCH] call real the system synchronize instruction + +commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:29:17 2007 +0800 + + [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it + +commit dfeeab2cd680df047e68e723b246adf6f33bb556 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:28:34 2007 +0800 + + [Blackfin][PATCH]: fix flash unaligned copy issue + +commit 31c98a88228021b314c89ebb8104fb6473da4471 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 4 02:09:30 2007 +0200 + + Minor coding style cleanup. + +commit 94abd7c0583ebe01e799b25f451201deeaab550d +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 4 01:49:15 2007 +0200 + + Minor cleanup. + +commit a65c5768e5537530bd1780af3d3fddc3113a163c +Author: Stefan Roese <sr@denx.de> +Date: Mon Apr 2 10:09:30 2007 +0200 + + ppc4xx: Change SysACE address on Katmai + + With this new base address of the Xilinx SystemACE controller + the Linux driver will be easier to adapt, since it can now be + mapped via the "normal" ioremap() call. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 14:30:53 2007 -0400 + + Fix some minor whitespace violations. + +commit 213bf8c822de8eecaf69860684469cdaba2e9e6a +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:23:51 2007 -0400 + + Add a flattened device tree (fdt) command (2 of 2) + + Modifications to the existing code to support the new fdt command. + +commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:22:10 2007 -0400 + + Add a flattened device tree (fdt) command (1 of 2) + + The fdt command uses David Gibson's libfdt library to manipulate as well + as print the flattened device tree. This patch is the new command, + the second part is the modifications to the existing code. + +commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:13:43 2007 -0400 + + libfdt: Enhanced and published fdt_next_tag() + + Enhanced the formerly private function _fdt_next_tag() to allow stepping + through the tree, used to produce a human-readable dump, and made + it part of the published interface. + Also added some comments. + +commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:05:39 2007 -0400 + + libfdt: Customizations for use by u-boot. + + Changes to David Gibson's original source to fit into u-boot's + environment. No functionality changes. + +commit 35748177c64a4a83a00057e93bb33e40278a2a96 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:00:56 2007 -0400 + + libfdt: Import libfdt source (2 of 2) + + This adds the applicable libfdt source files (unmodified) and a README + to explain where the source came from. + +commit 7cd5da0fe877e7171a4cdd44880bce783132871a +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 11:59:59 2007 -0400 + + libfdt: Import libfdt source (1 of 2) + + This adds the applicable libfdt source files (unmodified) and a README + to explain where the source came from. + +commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 13:16:23 2007 +0200 + + ppc4xx: Update Katmai bootstrap command + + Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB + is selected. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cabee756a6532986729477c3cc1ea16ef8517ad2 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 13:15:06 2007 +0200 + + ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) + + Additional RAM information is now printed upon powerup, like + DDR2 frequency and CAS latency. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 60723803431ac75cad085690789e433d5ab9174e +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 08:48:36 2007 +0200 + + ppc4xx: Change Yucca config file to support ECC + + With the updated 44x DDR2 driver the Yucca board now supports + ECC generation and checking. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 490e5730c674b20d708b783a2c5ffd7208f83873 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 08:47:34 2007 +0200 + + ppc4xx: Fix "bootstrap" command for Katmai board + + The board specific "bootstrap" command is now fixed and can + be used for the AMCC Katmai board to configure different + CPU/PLB/OPB frequencies. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 08:46:08 2007 +0200 + + ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) + + Fix a bug in the auto calibration routine. This driver now runs + more reliable with the tested modules. It's also tested with + 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 342cd097be1e7affe82f42ab3da220959a699e64 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 30 22:52:09 2007 +0200 + + [PATCH] Clean include dependence + +commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 30 22:42:45 2007 +0200 + + [CLEAN] Remove inefficient Suzaku code + +commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 28 15:03:16 2007 +0200 + + Merge some AMCC make targets to keep the top-level Makefile smaller + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 28 14:52:12 2007 +0200 + + i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined + + The "old" i2c commands (iprobe, imd...) are now compiled in again, + even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE + config option. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a +Author: Michal Simek <monstr@monstr.eu> +Date: Tue Mar 27 00:32:16 2007 +0200 + + PATCH: Resolve GPL license problem + +commit 1798049522f594013aea29457d46794298c6ae15 +Author: Michal Simek <root@monstr.eu> +Date: Mon Mar 26 01:39:07 2007 +0200 + + Support for XUPV2P board + Reset support + BSP autoconfig support + +commit 0d974d5297349504a2ddfa09314be573b5df320a +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 24 15:57:09 2007 +0100 + + [PATCH] Add 4xx GPIO functions + + This patch adds some 4xx GPIO functions. It also moves some of the + common code and defines into a common 4xx GPIO header file. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 24 15:55:58 2007 +0100 + + [PATCH] Small Sequoia cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 24 15:45:34 2007 +0100 + + [PATCH] Clean up 40EZ/Acadia support + + This patch cleans up all the open issue of the preliminary + Acadia support. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Dec 12 11:02:20 2006 -0600 + + Fix 8641HPCN problem with ld version 2.16 + + (Dot outside sections problem). + + This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c +Author: Haiying Wang <haiying.wang@freescale.com> +Date: Thu Dec 7 10:35:55 2006 -0600 + + Set Rev 2.x 86xx PIC in mixed mode. + + Prevent false interrupt from hanging Linux as MSR[EE] is set + to enable interrupts by changing the PIC out of the default + pass through mode into mixed mode. + + Signed-off-by: Haiying Wang <haiying.wang@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e +Author: Jason Jin <jason.jin@freescale.com> +Date: Thu Dec 7 10:32:35 2006 -0600 + + Add flash cmd function to 8641HPCN ramboot + + Also fixes some commmand for 8641 HPCN ramboot case. + + Signed-off-by: Jason Jin <jason.jin@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46 +Author: Ed Swarthout <ed.swarthout@freescale.com> +Date: Thu Dec 7 10:34:14 2006 -0600 + + Add support for 8641 Rev 2 silicon. + + Without this patch, I am unable to get to the prompt on rev 2 silicon. + Only set ddrioovcr for rev1. + + Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 44ba464b99001f8bd1c456a1e9d59726252f707a +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Mar 22 00:13:12 2007 +0100 + + Code cleanup / re-insert previous Copyright entries. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302 Author: Wolfgang Denk <wd@denx.de> Date: Wed Mar 21 23:26:15 2007 +0100 @@ -148,6 +834,38 @@ Date: Mon Mar 12 00:25:14 2007 +0800 [Blackfin][PATCH] code cleanup +commit cfc67116a706fd18b8f6a9c11a16753c5626d689 +Author: Michal Simek <monstr@monstr.eu> +Date: Sun Mar 11 13:48:24 2007 +0100 + + [Microblaze][PATCH] part 2 + timer support + interrupt controller support + flash support + ethernet support + cache support + board information support + env support + booting image support + + adding support for Xilinx ML401 + +commit 76316a318de91f6184e7c22a10e02d275ade2441 +Author: Michal Simek <monstr@monstr.eu> +Date: Sun Mar 11 13:42:58 2007 +0100 + + [Microblaze][PATCH] + timer support + interrupt controller support + flash support + ethernet support + cache support + board information support + env support + booting image support + + adding support for Xilinx ML401 + commit 8db13d63157811c839d15a313d9f2d2f5fd10af3 Author: Aubrey Li <aubrey.adi@gmail.com> Date: Sat Mar 10 23:49:29 2007 +0800 @@ -358,6 +1076,12 @@ Date: Tue Mar 6 07:47:04 2007 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Mar 4 01:36:05 2007 +0100 + + Some code cleanup. + commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 Author: Kim Phillips <kim.phillips@freescale.com> Date: Wed Feb 28 00:02:04 2007 -0600 @@ -1229,6 +1953,15 @@ Date: Tue Jan 23 13:25:22 2007 +0100 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip Identification Register (CIR). +commit fdef388758506765d4d6a7155c8f1584c63ff581 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Mon Jan 22 13:19:21 2007 +0800 + + use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP + The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 + fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support + mpc7448hpc2 board. + commit a4012396645533aef218354eeba754dff0deace8 Author: Wolfgang Denk <wd@pollux.denx.de> Date: Fri Jan 19 23:08:39 2007 +0100 @@ -1644,6 +2377,72 @@ Date: Fri Dec 8 16:23:08 2006 +0100 automatic update mechanism +commit 9d27b3a0685ff99fc477983f315c04d49f657a8a +Author: roy zang <tie-fei.zang@freescale.com> +Date: Mon Dec 4 17:56:59 2006 +0800 + + Slight code clean up. + Add comments, delete duplicate define and remove spaces. + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Mon Dec 4 17:54:21 2006 +0800 + + Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original + multiplier table can not refect the real PLL clock behavior of these + processors. Please refer to the hardware specification for detailed + information of the corresponding processors. + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Mon Dec 4 14:46:23 2006 +0800 + + Remove the static MAC address, ip address, server ip, netmask and + gateway ip for network setting. + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf +Author: roy zang <tie-fei.zang@freescale.com> +Date: Mon Dec 4 14:33:08 2006 +0800 + + Remove the duplicate memory test code for mpc744ihpc2 board. + If a memory test is needed, please use the functions in + post/memory.c or memtest command. + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit c9c1eeed7dd193fa65fb194654132040d49d4d3a +Author: roy zang <tie-fei.zang@freescale.com> +Date: Fri Dec 1 19:01:25 2006 +0800 + + Fix the exception occuring in RAM table search issue. + The original search_one_table() function code can only processes the search + for the exception occurring in FLASH/ROM, because the exception and fixup + table usually locate in FLASH. If the exception address is also in + FLASH, it will be OK. + If the exception occurs in RAM, after the u-boot relocation, a + relocation offset should be added. + + clean up the code in cpu/74xx_7xx/cpu.c + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit ee311214e0d216f904feea269599d0934bf71f23 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Fri Dec 1 11:47:36 2006 +0800 + + Clean up the code according to codestyle: + (1) remove some C++ comments. + (2) remove trailing white space. + (3) remove trailing empty line. + (4) Indentation by table. + (5) remove {} in one line condition. + (6) add space before '(' in function call. + Remove some weird printf () output. + Add necessary comments. + Modified Makefile to support building in a separate directory. + commit dd520bf314c7add4183c5191692180f576f96b60 Author: Wolfgang Denk <wd@pollux.denx.de> Date: Thu Nov 30 18:02:20 2006 +0100 @@ -2350,12 +3149,191 @@ Date: Thu Sep 7 07:39:46 2006 -0700 Signed-off-by: Nick Spence <nick.spence@freescale.com> +commit 4831c8b8a97799da77923d6bbb4c260c0d45521c +Author: roy zang <tie-fei.zang@freescale.com> +Date: Fri Nov 3 13:10:00 2006 +0800 + + Remove some unused CFG define. + undef CFG_DRAM_TEST + +commit 99c09c4dec34f77c243bf51bea532e3f339410ad +Author: roy zang <tie-fei.zang@freescale.com> +Date: Fri Nov 3 13:07:36 2006 +0800 + + Change the TEXT_BASE from 0xFFF00000 to 0xFF000000. + Both work. 0xFF000000 seems more reasonable. + commit c59200443072353044aa4bf737a5a60f9a9af231 Author: Wolfgang Denk <wd@pollux.denx.de> Date: Thu Nov 2 15:15:01 2006 +0100 Release U-Boot 1.1.6 +commit c1fbe4103a0d6c8957f912af902d705ba67836f2 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 19:14:48 2006 +0800 + + This patch comes from Yuli's posted patch on 8/8/2006 + titled "CFI Driver Little-Endian write Issue". + + http://sourceforge.net/mailarchive/message.php?msg_id=36311999 + + If that patch applied, please discard this one. + Until now , I do not see his patch is applied. So please apply this one. + + Signed-off-by: Yuli Barcohen <yuli@arabellasw.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit b825f158e449e1e9cf74c08e572955e122394c96 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 19:12:31 2006 +0800 + + Tsi108 on chip i2c support. + + The i2c Interface provides a master-only, serial interface that can be + used for initializing Tsi108/Tsi109 registers from an EEPROM after a + device reset. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 19:11:06 2006 +0800 + + Tsi108 on chip pci controller support. + + If there is no pci card, the tsi108/109 pci configure read will + cause a machine check exception to the processor. PCI error should + also be cleared after the read. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit d1927cee977126e547ceeba23e4f978f377cfb8f +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 19:08:55 2006 +0800 + + Tundra tsi108 on chip Ethernet controller support. + + The following is a brief description of the Ethernet controller: + The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent + Gigabit Ethernet ports,E0 and E1. It uses a single Management interface + to manage the two physical connection devices (PHYs). Each Ethernet port + has its own statistics monitor that tracks and reports key interface + statistics. Each port supports a 256-entry hash table for address + filtering. In addition, each port is bridged to the Switch Fabric + through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. + + Each Ethernet port also has a pair of internal Ethernet DMA channels to + support the transmit and receive data flows. The Ethernet DMA channels + use descriptors set up in memory, the memory map of the device, and + access via the Switch Fabric. The Ethernet Controller?s DMA arbiter + handles arbitration for the Switch Fabric. The Controller also + has a register businterface for register accesses and status monitor + control. + + The PMD (Physical Media Device) interface operates in MII, GMII, or TBI + modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. + The GMII and TBI modes are used to connect with Gigabit PMDs. Internal + data flows to and from the Ethernet Controller through the Switch Fabric. + + Each Ethernet port uses its transmit and receive DMA channels to manage + data flows through buffer descriptors that are predefined by the + system (the descriptors can exist anywhere in the system memory map). + These descriptors are data structures that point to buffers filled + with data ready to transmit over Ethernet, or they point to empty + buffers ready to receive data from Ethernet. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 19:01:33 2006 +0800 + + Tundra tsi108 header file. + + The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for + PowerPC processors that offers numerous system interconnect options for + embedded application designers. The Tsi108 can interconnect 60x or + MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet, + and Flash. Provided the macro define for tsi108 chip. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 87c4db09699c6b89176b31004afcb83eb1585d47 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 18:59:15 2006 +0800 + + Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. + mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 27801b8ab11c61b577e45742a515bb3b23b80241 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 18:57:21 2006 +0800 + + Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. + Make ,config.mk and link file for the mpc7448hpc2 board. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 18:55:04 2006 +0800 + + Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. + The mpc7448hpc2 board support header file. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 625bb5ddb50b243f931262ca8c46956409471917 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 18:52:21 2006 +0800 + + Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. + The mpc7448hpc2 board support low level assemble language init code. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 4c52783b3d024e153c4972b97332e314bc3bdc46 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 18:49:51 2006 +0800 + + General code modification for mpc7448hpc2 board support. + 1. Add 7447A and 7448 processor support. + 2. Add the following flags. + + CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically + (such as by switch on board), this flag should be set. + + CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot + relocates to RAM, this flag should be set. + + CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the + system hang in exception, this flag should be set. + + There is a design issue for tsi108/109 pci configure read. When pci scan + the slots, if there is no pci card, the tsi108/9 will cause a machine + check exception for mpc7448 processor. + + Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695 +Author: roy zang <tie-fei.zang@freescale.com> +Date: Thu Nov 2 18:34:47 2006 +0800 + + Add README file for mpc7448hpc2 board. + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 Author: Bartlomiej Sieka <tur@semihalf.com> Date: Wed Nov 1 02:04:38 2006 +0100 @@ -474,3 +474,8 @@ N: Timur Tabi E: timur@freescale.com D: Support for MPC8349E-mITX W: www.freescale.com + +N: Michal Simek +E: monstr@monstr.eu +D: Support for Microblaze, ML401, XUPV2P board +W: www.monstr.eu diff --git a/MAINTAINERS b/MAINTAINERS index 68233cf23..2a43848fc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -564,6 +564,11 @@ Yasushi Shoji <yashi@atmark-techno.com> SUZAKU MicroBlaze +Michal Simek <monstr@monstr.eu> + + ML401 MicroBlaze + XUPV2P MicroBlaze + ######################################################################### # Coldfire Systems: # # # @@ -155,6 +155,7 @@ LIST_85xx=" \ LIST_74xx=" \ DB64360 DB64460 EVB64260 P3G4 \ p3m7448 PCIPPC2 PCIPPC6 ZUMA \ + mpc7448hpc2 " LIST_7xx=" \ @@ -293,7 +294,7 @@ LIST_nios2=" \ ######################################################################### LIST_microblaze=" \ - suzaku + suzaku ml401 xupv2p " ######################################################################### @@ -149,7 +149,7 @@ ifeq ($(ARCH),blackfin) CROSS_COMPILE = bfin-uclinux- endif ifeq ($(ARCH),avr32) -CROSS_COMPILE = avr32- +CROSS_COMPILE = avr32-linux- endif endif endif @@ -430,6 +430,7 @@ inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 lite5200b_config \ +lite5200b_PM_config \ lite5200b_LOWBOOT_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @@ -438,6 +439,10 @@ lite5200b_LOWBOOT_config: unconfig @ echo "... DDR memory revision" @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h + @[ -z "$(findstring _PM_,$@)" ] || \ + { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ + echo "... with power management (low-power mode) support" ; \ + } @[ -z "$(findstring LOWBOOT_,$@)" ] || \ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ echo "... with LOWBOOT configuration" ; \ @@ -1190,44 +1195,31 @@ PPChameleonEVB_HI_33_config: unconfig } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave -rainier_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_RAINIER" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc - -rainier_nand_config: unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)nand_spl - @mkdir -p $(obj)board/amcc/sequoia - @echo "#define CONFIG_RAINIER" > $(obj)include/config.h - @echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h - @echo "Compile NAND boot image for sequoia" - @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc - @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk - sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 -sequoia_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx sequoia amcc +sequoia_config \ +rainier_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ + tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h + @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc -sequoia_nand_config: unconfig +sequoia_nand_config \ +rainier_nand_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)nand_spl @mkdir -p $(obj)board/amcc/sequoia @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @echo "Compile NAND boot image for sequoia" - @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc + @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ + tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h + @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk sc3_config:unconfig @./mkconfig $(@:_config=) ppc ppc4xx sc3 -sycamore_config: unconfig - @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc - taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc @@ -1244,8 +1236,10 @@ W7OLMC_config \ W7OLMG_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o -walnut_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx walnut amcc +# Walnut & Sycamore images are identical (recognized via PVR) +walnut_config \ +sycamore_config: unconfig + @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc WUH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd @@ -1253,12 +1247,11 @@ WUH405_config: unconfig XPEDITE1K_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k -yosemite_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx yosemite amcc - -yellowstone_config: unconfig +yosemite_config \ +yellowstone_config: unconfig @mkdir -p $(obj)include - @echo "#define CONFIG_YELLOWSTONE" > $(obj)include/config.h + @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ + tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc yucca_config: unconfig @@ -1826,6 +1819,9 @@ EVB64260_config \ EVB64260_750CX_config: unconfig @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 +mpc7448hpc2_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 + P3G4_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 @@ -2358,6 +2354,16 @@ suzaku_config: unconfig @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno +ml401_config: unconfig + @ >include/config.h + @echo "#define CONFIG_ML401 1" >> include/config.h + @./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx + +xupv2p_config: unconfig + @ >include/config.h + @echo "#define CONFIG_XUPV2P 1" >> include/config.h + @./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx + ######################################################################### ## Blackfin ######################################################################### @@ -164,6 +164,7 @@ Directory Hierarchy: - lib_mips Files generic to MIPS architecture - lib_nios Files generic to NIOS architecture - lib_ppc Files generic to PowerPC architecture +- libfdt Library files to support flattened device trees - net Networking code - post Power On Self Test - rtc Real Time Clock drivers @@ -430,12 +431,23 @@ The following options need to be configured: expect it to be in bytes, others in MB. Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. - CONFIG_OF_FLAT_TREE + CONFIG_OF_LIBFDT / CONFIG_OF_FLAT_TREE New kernel versions are expecting firmware settings to be - passed using flat open firmware trees. - The environment variable "disable_of", when set, disables this - functionality. + passed using flattened device trees (based on open firmware + concepts). + + CONFIG_OF_LIBFDT + * New libfdt-based support + * Adds the "fdt" command + * The bootm command does _not_ modify the fdt + + CONFIG_OF_FLAT_TREE + * Deprecated, see CONFIG_OF_LIBFDT + * Original ft_build.c-based support + * Automatically modifies the dft as part of the bootm command + * The environment variable "disable_of", when set, + disables this functionality. CONFIG_OF_FLAT_TREE_MAX_SIZE @@ -448,13 +460,16 @@ The following options need to be configured: CONFIG_OF_HAS_BD_T - The resulting flat device tree will have a copy of the bd_t. - Space should be pre-allocated in the dts for the bd_t. + * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command + * CONFIG_OF_FLAT_TREE - The resulting flat device tree + will have a copy of the bd_t. Space should be + pre-allocated in the dts for the bd_t. CONFIG_OF_HAS_UBOOT_ENV - The resulting flat device tree will have a copy of u-boot's - environment variables + * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command + * CONFIG_OF_FLAT_TREE - The resulting flat device tree + will have a copy of u-boot's environment variables CONFIG_OF_BOARD_SETUP @@ -721,6 +736,8 @@ The following options need to be configured: #define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET) + Other Commands: + fdt (flattened device tree) command: CONFIG_OF_LIBFDT Note: Don't enable the "icache" and "dcache" commands (configuration option CFG_CMD_CACHE) unless you know @@ -2381,17 +2398,17 @@ configurations; the following names are supported: csb272_config lwmon_config sbc8260_config CU824_config MBX860T_config sbc8560_33_config DUET_ADS_config MBX_config sbc8560_66_config - EBONY_config MPC8260ADS_config SM850_config - ELPT860_config MPC8540ADS_config SPD823TS_config - ESTEEM192E_config MPC8540EVAL_config stxgp3_config - ETX094_config MPC8560ADS_config SXNI855T_config - FADS823_config NETVIA_config TQM823L_config - FADS850SAR_config omap1510inn_config TQM850L_config - FADS860T_config omap1610h2_config TQM855L_config - FPS850L_config omap1610inn_config TQM860L_config - omap5912osk_config walnut_config - omap2420h4_config Yukon8220_config - ZPC1900_config + EBONY_config mpc7448hpc2_config SM850_config + ELPT860_config MPC8260ADS_config SPD823TS_config + ESTEEM192E_config MPC8540ADS_config stxgp3_config + ETX094_config MPC8540EVAL_config SXNI855T_config + FADS823_config NMPC8560ADS_config TQM823L_config + FADS850SAR_config NETVIA_config TQM850L_config + FADS860T_config omap1510inn_config TQM855L_config + FPS850L_config omap1610h2_config TQM860L_config + omap1610inn_config walnut_config + omap5912osk_config Yukon8220_config + omap2420h4_config ZPC1900_config Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for diff --git a/avr32_config.mk b/avr32_config.mk index 0b92053e1..441caa405 100644 --- a/avr32_config.mk +++ b/avr32_config.mk @@ -21,5 +21,5 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -ffixed-r5 -mno-pic -mrelax +PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax PLATFORM_LDFLAGS += --relax diff --git a/board/AtmarkTechno/suzaku/suzaku.c b/board/AtmarkTechno/suzaku/suzaku.c index afe124a9d..267c476f0 100644 --- a/board/AtmarkTechno/suzaku/suzaku.c +++ b/board/AtmarkTechno/suzaku/suzaku.c @@ -24,7 +24,7 @@ /* This is a board specific file. It's OK to include board specific * header files */ -#include <asm/suzaku.h> +#include <config.h> void do_reset(void) { diff --git a/board/AtmarkTechno/suzaku/u-boot.lds b/board/AtmarkTechno/suzaku/u-boot.lds index 00a8ef7ad..cb90854a3 100644 --- a/board/AtmarkTechno/suzaku/u-boot.lds +++ b/board/AtmarkTechno/suzaku/u-boot.lds @@ -61,6 +61,7 @@ SECTIONS { __bss_start = .; *(.bss) - __bss_start = .; + __bss_end = .; } + __end = . ; } diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile index 183f694c7..abcbf3e43 100644 --- a/board/amcc/acadia/Makefile +++ b/board/amcc/acadia/Makefile @@ -23,25 +23,29 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o cpr.o memory.o +COBJS = $(BOARD).o cpr.o memory.o SOBJS = -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak .depend *~ ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index c8aaad2d7..baf598c67 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -26,10 +26,7 @@ extern void board_pll_init_f(void); -/* Some specific Acadia Defines */ -#define CPLD_BASE 0x80000000 - -void liveoak_gpio_init(void) +static void acadia_gpio_init(void) { /* * GPIO0 setup (select GPIO or alternate function) @@ -54,62 +51,16 @@ void liveoak_gpio_init(void) out32(GPIO1_TCR, CFG_GPIO1_TCR); /* enable output driver for outputs */ } -#if 0 /* test-only: not called at all??? */ -void ext_bus_cntlr_init(void) -{ -#if (defined(EBC_PB4AP) && defined(EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4)) - mtebc(pb4ap, EBC_PB4AP); - mtebc(pb4cr, EBC_PB4CR); -#endif -} -#endif - int board_early_init_f(void) { unsigned int reg; -#if 0 /* test-only */ - /* - * If CRAM memory and SPI/NAND boot, and if the CRAM memory is - * already initialized by the pre-loader then we can't reinitialize - * CPR registers, GPIO registers and EBC registers as this will - * have the effect of un-initializing CRAM. - */ - spr_reg = (volatile unsigned long) mfspr(SPRG7); - if (spr_reg != LOAK_CRAM) { /* != CRAM */ + /* don't reinit PLL when booting via I2C bootstrap option */ + mfsdr(SDR_PINSTP, reg); + if (reg != 0xf0000000) board_pll_init_f(); - liveoak_gpio_init(); - ext_bus_cntlr_init(); - mtebc(pb1ap, CFG_EBC_PB1AP); - mtebc(pb1cr, CFG_EBC_PB1CR); - - mtebc(pb2ap, CFG_EBC_PB2AP); - mtebc(pb2cr, CFG_EBC_PB2CR); - } -#else - board_pll_init_f(); - liveoak_gpio_init(); -/* ext_bus_cntlr_init(); */ -#endif - -#if 0 /* test-only (orig) */ - /* - * If we boot from NAND Flash, we are running in - * RAM, so disable the EBC_CS0 so that it goes back - * to the NOR Flash. It will be enabled later - * for the NAND Flash on EBC_CS1 - */ - mfsdr(sdrultra0, reg); - mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0); -#endif -#if 0 /* test-only */ - /* configure for NAND */ - mfsdr(sdrultra0, reg); - reg &= ~SDR_ULTRA0_CSN_MASK; - reg |= SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS; - mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0); -#endif + acadia_gpio_init(); /* USB Host core needs this bit set */ mfsdr(sdrultra1, reg); @@ -128,7 +79,7 @@ int board_early_init_f(void) int misc_init_f(void) { /* Set EPLD to take PHY out of reset */ - out8(CPLD_BASE + 0x05, 0x00); + out8(CFG_CPLD_BASE + 0x05, 0x00); udelay(100000); return 0; diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk index ce2137465..c8566ecc7 100644 --- a/board/amcc/acadia/config.mk +++ b/board/amcc/acadia/config.mk @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -21,21 +21,10 @@ # MA 02111-1307 USA # -sinclude $(TOPDIR)/board/amcc/liveoak/config.tmp - ifndef TEXT_BASE TEXT_BASE = 0xFFFC0000 endif -ifeq ($(CONFIG_NAND_U_BOOT),y) -LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif - -ifeq ($(CONFIG_SPI_U_BOOT),y) -LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-spi.lds -PAD_TO = 0x00840000 -endif - ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/cpr.c index 23b9e1242..9dcce35c8 100644 --- a/board/amcc/acadia/cpr.c +++ b/board/amcc/acadia/cpr.c @@ -76,19 +76,19 @@ void board_pll_init_f(void) * | UART0 | 28.57 | 7 (0x07)| * | UART1 | 28.57 | 7 (0x07)| * | DAC | 28.57 | 7 (0xA7)| - * | ADC | 4 | 50 (0x32)| + * | ADC | 4 | 50 (0x32)| * | PWM | 28.57 | 7 (0x07)| * | EMAC | 4 | 50 (0x32)| * ----------------------------------- */ /* Initialize PLL */ - mtcpr(cprpllc, 0x20000238); - mtcpr(cprplld, 0x03010400); + mtcpr(cprpllc, 0x20000238); + mtcpr(cprplld, 0x03010400); mtcpr(cprprimad, 0x03050a0a); - mtcpr(cprperc0, 0x00000000); - mtcpr(cprperd0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */ - mtcpr(cprperd1, 0x07323200); + mtcpr(cprperc0, 0x00000000); + mtcpr(cprperd0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */ + mtcpr(cprperd1, 0x07323200); mtcpr(cprclkupd, 0x40000000); } @@ -117,11 +117,11 @@ void board_pll_init_f(void) */ /* Initialize PLL */ - mtcpr(cprpllc, 0x0000033C); - mtcpr(cprplld, 0x0a010000); + mtcpr(cprpllc, 0x0000033C); + mtcpr(cprplld, 0x0a010000); mtcpr(cprprimad, 0x02040808); - mtcpr(cprperd0, 0x02080505); /* SPI clk div. eq. OPB clk div. */ - mtcpr(cprperd1, 0xA6A60300); + mtcpr(cprperd0, 0x02080505); /* SPI clk div. eq. OPB clk div. */ + mtcpr(cprperd1, 0xA6A60300); mtcpr(cprclkupd, 0x40000000); } @@ -143,20 +143,20 @@ void board_pll_init_f(void) */ /* Initialize PLL */ - mtcpr(cprpllc, 0x000003BC); - mtcpr(cprplld, 0x06060600); + mtcpr(cprpllc, 0x000003BC); + mtcpr(cprplld, 0x06060600); mtcpr(cprprimad, 0x02020004); - mtcpr(cprperd0, 0x04002828); /* SPI clk div. eq. OPB clk div. */ - mtcpr(cprperd1, 0xC8C81600); + mtcpr(cprperd0, 0x04002828); /* SPI clk div. eq. OPB clk div. */ + mtcpr(cprperd1, 0xC8C81600); mtcpr(cprclkupd, 0x40000000); } -#endif /* CPU_<speed>_405EZ */ +#endif /* CPU_<speed>_405EZ */ #if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) /* * Get timebase clock frequency */ -unsigned long get_tbclk (void) +unsigned long get_tbclk(void) { unsigned long cpr_plld; unsigned long cpr_primad; @@ -192,4 +192,4 @@ unsigned long get_tbclk (void) return (freqProcessor); } -#endif /* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */ +#endif /* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */ diff --git a/board/amcc/acadia/flash.c b/board/amcc/acadia/flash.c deleted file mode 100644 index 0626aba9d..000000000 --- a/board/amcc/acadia/flash.c +++ /dev/null @@ -1,1108 +0,0 @@ -/* - * (C) Copyright 2004-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 Jun Gu <jung@artesyncp.com> - * Add support for Am29F016D and dynamic switch setting. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com - */ - -#include <common.h> -#include <ppc4xx.h> -#include <asm/processor.h> - -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* - * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0 - */ -static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = { - {0xffc00001}, /* 0:boot from big flash */ -}; - -/* - * include common flash code (for amcc boards) - */ -/*----------------------------------------------------------------------- - * Functions - */ -static int write_word(flash_info_t * info, ulong dest, ulong data); -#ifdef CFG_FLASH_2ND_16BIT_DEV -static int write_word_1(flash_info_t * info, ulong dest, ulong data); -static int write_word_2(flash_info_t * info, ulong dest, ulong data); -static int flash_erase_1(flash_info_t * info, int s_first, int s_last); -static int flash_erase_2(flash_info_t * info, int s_first, int s_last); -static ulong flash_get_size_1(vu_long * addr, flash_info_t * info); -static ulong flash_get_size_2(vu_long * addr, flash_info_t * info); -#endif - -void flash_print_info(flash_info_t * info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_STM: - printf("STM "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_SST: - printf("SST "); - break; - case FLASH_MAN_MX: - printf("MIXC "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - printf("AM29F040 (512 Kbit, uniform sector size)\n"); - break; - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AMD016: - printf("AM29F016D (16 Mbit, uniform sector size)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_AM033C: - printf("AM29LV033C (32 Mbit, top boot sector)\n"); - break; - case FLASH_SST800A: - printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); - break; - case FLASH_SST160A: - printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); - break; - case FLASH_STMW320DT: - printf ("M29W320DT (32 M, top sector)\n"); - break; - case FLASH_MXLV320T: - printf ("MXLV320T (32 Mbit, top sector)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count - 1)) - size = info->start[i + 1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k = 0; k < size; k++) { - if (*flash++ != 0xffffffff) { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s%s", - info->start[i], - erased ? " E" : " ", info->protect[i] ? "RO " : " "); - } - printf("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -#ifdef CFG_FLASH_2ND_16BIT_DEV -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - /* bit 0 used for big flash marking */ - if ((ulong)addr & 0x1) { - return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info); - } else { - return flash_get_size_1(addr, info); - } -} - -static ulong flash_get_size_1(vu_long * addr, flash_info_t * info) -#else -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -#endif -{ - short i; - CFG_FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); - - /* Write auto select command: read Manufacturer ID */ - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; - udelay(1000); - - value = addr2[0]; - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D: - info->flash_id += FLASH_AMD016; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C: - info->flash_id += FLASH_AMDLV033C; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); - - /* For AMD29033C flash we need to resend the command of * - * reading flash protection for upper 8 Mb of flash */ - if (i == 32) { - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; - - return (info->size); -} - -static int wait_for_DQ7_1(flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile CFG_FLASH_WORD_SIZE *addr = - (CFG_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - last = start; - while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != - (CFG_FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - return 0; -} - -#ifdef CFG_FLASH_2ND_16BIT_DEV -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { - return flash_erase_2(info, s_first, s_last); - } else { - return flash_erase_1(info, s_first, s_last); - } -} - -static int flash_erase_1(flash_info_t * info, int s_first, int s_last) -#else -int flash_erase(flash_info_t * info, int s_first, int s_last) -#endif -{ - volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); - volatile CFG_FLASH_WORD_SIZE *addr2; - int flag, prot, sect, l_sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ - for (i = 0; i < 50; i++) - udelay(1000); /* wait 1 ms */ - } else { - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - } - l_sect = sect; - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_1(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -#ifdef CFG_FLASH_2ND_16BIT_DEV -static int write_word(flash_info_t * info, ulong dest, ulong data) -{ - if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { - return write_word_2(info, dest, data); - } else { - return write_word_1(info, dest, data); - } -} - -static int write_word_1(flash_info_t * info, ulong dest, ulong data) -#else -static int write_word(flash_info_t * info, ulong dest, ulong data) -#endif -{ - volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); - volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; - volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - - for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} - -#ifdef CFG_FLASH_2ND_16BIT_DEV - -#undef CFG_FLASH_WORD_SIZE -#define CFG_FLASH_WORD_SIZE unsigned short - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) -{ - short i; - int n; - CFG_FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); - - /* issue bank reset to return to read mode */ - addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; - /* Write auto select command: read Manufacturer ID */ - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; - udelay(1000); - - value = addr2[0]; - DEBUGF("FLASH MANUFACT: %x\n", value); - -#if 0 /* TODO: remove ifdef when Flash responds correctly */ - switch (value) { - case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - case (CFG_FLASH_WORD_SIZE) MX_MANUFACT: - info->flash_id = FLASH_MAN_MX; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } -#endif /* TODO: remove ifdef when Flash responds correctly */ - - /* - * TODO: Start - * uncomment block above when Flash responds correctly. - * also remove the lines below: - */ - info->flash_id = FLASH_MAN_AMD; - DEBUGF("FLASH MANUFACT: FLASH_MAN_AMD\n"); - /* TODO: End */ - - value = addr2[1]; /* device ID */ - - DEBUGF("\nFLASH DEVICEID: %x\n", value); - -#if 0 /* TODO: remove ifdef when Flash responds correctly */ - switch (value) { - - case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 71; - info->size = 0x00400000; break; /* => 4 MB */ - - case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 71; - info->size = 0x00400000; break; /* => 4 MB */ - - case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT: - info->flash_id += FLASH_STMW320DT; - info->sector_count = 67; - info->size = 0x00400000; break; /* => 4 MB */ - - case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T: - info->flash_id += FLASH_MXLV320T; - info->sector_count = 71; - info->size = 0x00400000; break; /* => 4 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } -#endif /* TODO: remove ifdef when Flash responds correctly */ - - /* - * TODO: Start - * uncomment block above when Flash responds correctly. - * also remove the lines below: - */ - DEBUGF("\nFLASH DEVICEID: FLASH_AM320T\n"); - info->flash_id += FLASH_AM320T; - info->sector_count = 71; - info->size = 0x00400000; /* => 4 MB */ - /* TODO: End */ - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) { - /* set sector offsets for top boot block type */ - base += info->size; - i = info->sector_count; - /* 1 x 16k boot sector */ - base -= 16 << 10; - --i; - info->start[i] = base; - /* 2 x 8k boot sectors */ - for (n=0; n<2; ++n) { - base -= 8 << 10; - --i; - info->start[i] = base; - } - /* 1 x 32k boot sector */ - base -= 32 << 10; - --i; - info->start[i] = base; - - while (i > 0) { /* 64k regular sectors */ - base -= 64 << 10; - --i; - info->start[i] = base; - } - } else if ( ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ) { - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00002000; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000a000; - info->start[i--] = base + info->size - 0x0000c000; - info->start[i--] = base + info->size - 0x0000e000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - else { - if (info->flash_id & FLASH_BTYPE){ - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address,(A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); - - /* For AMD29033C flash we need to resend the command of * - * reading flash protection for upper 8 Mb of flash */ - if (i == 32) { - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; - - return (info->size); -} - -/* - * TODO: FIX: this wait loop sometimes fails: DQ7 indicates the erase command - * never was accepted (i.e. didn't start) - why???? - */ -static int wait_for_DQ7_2(flash_info_t * info, int sect) -{ - ulong start, now, last, counter = 0; - volatile CFG_FLASH_WORD_SIZE *addr = - (CFG_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - DEBUGF("DQ7_2: start = 0x%08lx\n", start); - last = start; - while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != - (CFG_FLASH_WORD_SIZE) 0x00800080) { - DEBUGF("DQ7_2: start = 0x%08lx, now = 0x%08lx\n", start, now); - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - udelay(1000000); /* 1 sec */ - putc('.'); - counter++; - if (counter > 5) { - return -1; - } - DEBUGF("DQ7_2: now = 0x%08lx, last = 0x%08lx\n", now, last); - } - return 0; -} - -static void wr_flash_cmd(ulong sector, ushort addr, CFG_FLASH_WORD_SIZE value) -{ - int fw_size; - - fw_size = sizeof(value); - switch (fw_size) - { - case 1: - out8((ulong)(sector + addr), value); - break; - case 2: - out16((ulong)(sector + (addr << 1)), value); - break; - default: - printf("flash_erase: error incorrect chip programing size.\n"); - } - return; -} - -static int flash_erase_2(flash_info_t * info, int s_first, int s_last) -{ - volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); - volatile CFG_FLASH_WORD_SIZE *addr2; - int flag, prot, sect, l_sect, count = 0; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first, count = 0; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ - for (i = 0; i < 50; i++) - udelay(1000); /* wait 1 ms */ - } else { - /* - * TODO: fix code - */ - wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0); - wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA); - wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055); - wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00800080); - wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA); - wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055); - wr_flash_cmd((ulong)addr2, 0, (CFG_FLASH_WORD_SIZE) 0x00300030); - udelay(2000000); /* 2 sec */ - wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0); - -#if 0 - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; - addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ -#endif - } - l_sect = sect; - printf(".."); - printf(".."); - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_2(info, sect); - count++; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf(" done\n"); - - if (count > 0) { - return 0; - } else { - return 1; - } -} - -static int write_word_2(flash_info_t * info, ulong dest, ulong data) -{ - volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); - volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; - volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - - for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; - addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} -#endif /* CFG_FLASH_2ND_16BIT_DEV */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_word(flash_info_t * info, ulong dest, ulong data); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - unsigned long total_b = 0; - unsigned long size_b[CFG_MAX_FLASH_BANKS]; - unsigned short index = 0; - int i; - - index = 0; - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { - continue; - } - - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], - &flash_info[i]); - flash_info[i].size = size_b[i]; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i] << 20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, - CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, - &flash_info[i]); -#if defined(CFG_ENV_IS_IN_FLASH) - (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#if defined(CFG_ENV_IS_IN_FLASH) && defined(CFG_ENV_ADDR_REDUND) - (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, - CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#endif -#endif - - total_b += flash_info[i].size; - } - - return total_b; -} diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index a1b015519..5375d36c9 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -21,529 +21,80 @@ * MA 02111-1307 USA */ +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + #include <common.h> #include <asm/processor.h> +#include <asm/io.h> +#include <asm/gpio.h> -#define CRAM_BANK0_BASE 0x0 -#define CRAM_DIDR 0x00100000 -#define MICRON_MT45W8MW16BGX_CRAM_ID 0x1b431b43 -#define MICRON_MT45W8MW16BGX_CRAM_ID2 0x13431343 -#define MICRON_DIDR_VENDOR_ID 0x00030003 /* 00011b */ -#define CRAM_DIDR_VENDOR_ID_MASK 0x001f001f /* DIDR[4:0] */ -#define CRAM_DEVID_NOT_SUPPORTED 0x00000000 - -#define PSRAM_PASS 0x50415353 /* "PASS" */ -#define PSRAM_FAIL 0x4641494C /* "FAIL" */ - -static u32 is_cram_inited(void); -static u32 is_cram(void); -static long int cram_init(u32); -static void cram_bcr_write(u32); -void udelay (unsigned long); - +/* + * sdram_init - Dummy implementation for start.S, spd_sdram used on this board! + */ void sdram_init(void) { - volatile unsigned long spr_reg; - - /* - * If CRAM not initialized or CRAM looks initialized because this - * is after a warm reboot then set SPRG7 to indicate CRAM needs - * initialization. Note that CRAM is initialized by the SPI and - * NAND preloader. - */ - spr_reg = (volatile unsigned long) mfspr(SPRG6); - if ((is_cram_inited() != 1) || (spr_reg != LOAK_SPL)) { - mtspr(SPRG7, LOAK_NONE); /* "NONE" */ - } -#if 1 - /* - * When running the NAND SPL, the normal EBC configuration is not - * done, so We need to enable EPLD access on EBC_CS_2 and the memory - * on EBC_CS_3 - */ - - /* Enable CPLD - Needed for PSRAM Access */ - - - /* Init SDRAM by setting EBC Bank 3 for PSRAM */ - mtebc(pb1ap, CFG_EBC_PB1AP); - mtebc(pb1cr, CFG_EBC_PB1CR); - - mtebc(pb2ap, CFG_EBC_PB2AP); - mtebc(pb2cr, CFG_EBC_PB2CR); - - /* pre-boot loader code: we are in OCM */ - mtspr(SPRG6, LOAK_SPL); /* "SPL " */ - mtspr(SPRG7, LOAK_OCM); /* "OCM " */ -#endif return; } static void cram_bcr_write(u32 wr_val) { - u32 tmp_reg; - u32 val; - volatile u32 gpio_reg; - - /* # Program CRAM write */ - - /* - * set CRAM_CRE = 0x1 - * set wr_val = wr_val << 2 - */ - gpio_reg = in32(GPIO1_OR); - out32(GPIO1_OR, gpio_reg | 0x00000400); - wr_val = wr_val << 2; - /* wr_val = 0x1c048; */ + wr_val <<= 2; - /* - * # stop PLL clock before programming CRAM - * set EPLD0_MUX_CTL.OESPR3 = 1 - * delay 2 - */ + /* set CRAM_CRE to 1 */ + gpio_write_bit(CFG_GPIO_CRAM_CRE, 1); - /* - * # CS1 - * read 0x00200000 - * #shift 2 bit left before write - * set val = wr_val + 0x00200000 - * write dmem val 0 - * read 0x00200000 val - * print val/8x - */ - tmp_reg = in32(0x00200000); - val = wr_val + 0x00200000; - /* val = 0x0021c048; */ - out32(val, 0x0000); - udelay(100000); - val = in32(0x00200000); + /* Write BCR to CRAM on CS1 */ + out32(wr_val + 0x00200000, 0); + debug("CRAM VAL: %08x for CS1 ", wr_val + 0x00200000); - debug("CRAM VAL: %x for CS1 ", val); + /* Write BCR to CRAM on CS2 */ + out32(wr_val + 0x02200000, 0); + debug("CRAM VAL: %08x for CS2\n", wr_val + 0x02200000); - /* - * # CS2 - * read 0x02200000 - * #shift 2 bit left before write - * set val = wr_val + 0x02200000 - * write dmem val 0 - * read 0x02200000 val - * print val/8x - */ - tmp_reg = in32(0x02200000); - val = wr_val + 0x02200000; - /* val = 0x0221c048; */ - out32(val, 0x0000); - udelay(100000); - val = in32(0x02200000); + sync(); + eieio(); - debug("CRAM VAL: %x for CS2 ", val); + /* set CRAM_CRE back to 0 (normal operation) */ + gpio_write_bit(CFG_GPIO_CRAM_CRE, 0); - /* - * # Start PLL clock before programming CRAM - * set EPLD0_MUX_CTL.OESPR3 = 0 - */ - - /* - * set CRAMCR = 0x1 - */ - gpio_reg = in32(GPIO1_OR); - out32(GPIO1_OR, gpio_reg | 0x00000400); - - /* - * # read CRAM config BCR ( bit19:18 = 10b ) - * #read 0x00200000 - * # 1001_1001_0001_1111 ( 991f ) => - * #10_0110_0100_0111_1100 => 2647c => 0022647c - * #0011_0010_0011_1110 (323e) - * # - */ - - /* - * set EPLD0_MUX_CTL.CRAMCR = 0x0 - */ - gpio_reg = in32(GPIO1_OR); - out32(GPIO1_OR, gpio_reg & 0xFFFFFBFF); return; } -static u32 is_cram_inited() -{ - volatile unsigned long spr_reg; - - /* - * If CRAM is initialized already, then don't reinitialize it again. - * In the case of NAND boot and SPI boot, CRAM will already be - * initialized by the pre-loader - */ - spr_reg = (volatile unsigned long) mfspr(SPRG7); - if (spr_reg == LOAK_CRAM) { - return 1; - } else { - return 0; - } -} - -/****** - * return 0 if not CRAM - * return 1 if CRAM and it's already inited by preloader - * else return cram_id (CRAM Device Identification Register) - ******/ -static u32 is_cram(void) -{ - u32 gpio_TCR, gpio_OSRL, gpio_OR, gpio_ISR1L; - volatile u32 gpio_reg; - volatile u32 cram_id = 0; - - if (is_cram_inited() == 1) { - /* this is CRAM and it is already inited (by preloader) */ - cram_id = 1; - } else { - /* - * # CRAM CLOCK - * set GPIO0_TCR.G8 = 1 - * set GPIO0_OSRL.G8 = 0 - * set GPIO0_OR.G8 = 0 - */ - gpio_reg = in32(GPIO0_TCR); - gpio_TCR = gpio_reg; - out32(GPIO0_TCR, gpio_reg | 0x00800000); - gpio_reg = in32(GPIO0_OSRL); - gpio_OSRL = gpio_reg; - out32(GPIO0_OSRL, gpio_reg & 0xffffbfff); - gpio_reg = in32(GPIO0_OR); - gpio_OR = gpio_reg; - out32(GPIO0_OR, gpio_reg & 0xff7fffff); - - /* - * # CRAM Addreaa Valid - * set GPIO0_TCR.G10 = 1 - * set GPIO0_OSRL.G10 = 0 - * set GPIO0_OR.G10 = 0 - */ - gpio_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, gpio_reg | 0x00200000); - gpio_reg = in32(GPIO0_OSRL); - out32(GPIO0_OSRL, gpio_reg & 0xfffffbff); - gpio_reg = in32(GPIO0_OR); - out32(GPIO0_OR, gpio_reg & 0xffdfffff); - - /* - * # config input (EBC_WAIT) - * set GPIO0_ISR1L.G9 = 1 - * set GPIO0_TCR.G9 = 0 - */ - gpio_reg = in32(GPIO0_ISR1L); - gpio_ISR1L = gpio_reg; - out32(GPIO0_ISR1L, gpio_reg | 0x00001000); - gpio_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, gpio_reg & 0xffbfffff); - - /* - * Enable CRE to read Registers - * set GPIO0_TCR.21 = 1 - * set GPIO1_OR.21 = 1 - */ - gpio_reg = in32(GPIO1_TCR); - out32(GPIO1_TCR, gpio_reg | 0x00000400); - - gpio_reg = in32(GPIO1_OR); - out32(GPIO1_OR, gpio_reg | 0x00000400); - - /* Read Version ID */ - cram_id = (volatile u32) in32(CRAM_BANK0_BASE+CRAM_DIDR); - udelay(100000); - - asm volatile(" sync"); - asm volatile(" eieio"); - - debug("Cram ID: %X ", cram_id); - - switch (cram_id) { - case MICRON_MT45W8MW16BGX_CRAM_ID: - case MICRON_MT45W8MW16BGX_CRAM_ID2: - /* supported CRAM vendor/part */ - break; - case CRAM_DEVID_NOT_SUPPORTED: - default: - /* check for DIDR Vendor ID of Micron */ - if ((cram_id & CRAM_DIDR_VENDOR_ID_MASK) == - MICRON_DIDR_VENDOR_ID) - { - /* supported CRAM vendor */ - break; - } - /* this is not CRAM or not supported CRAM vendor/part */ - cram_id = 0; - /* - * reset the GPIO registers to the values that were - * there before this routine - */ - out32(GPIO0_TCR, gpio_TCR); - out32(GPIO0_OSRL, gpio_OSRL); - out32(GPIO0_OR, gpio_OR); - out32(GPIO0_ISR1L, gpio_ISR1L); - break; - } - } - - return cram_id; -} - -static long int cram_init(u32 already_inited) -{ - volatile u32 tmp_reg; - u32 cram_wr_val; - - if (already_inited == 0) return 0; - - /* - * If CRAM is initialized already, then don't reinitialize it again. - * In the case of NAND boot and SPI boot, CRAM will already be - * initialized by the pre-loader - */ - if (already_inited != 1) { - /* - * #o CRAM Card - * # - CRAMCRE @reg16 = 1; for CRAM to use - * # - CRAMCRE @reg16 = 0; for CRAM to program - * - * # enable CRAM SEL, move from setEPLD.cmd - * set EPLD0_MUX_CTL.OECRAM = 0 - * set EPLD0_MUX_CTL.CRAMCR = 1 - * set EPLD0_ETHRSTBOOT.SLCRAM = 0 - * #end - */ - - /* - * #1. EBC need to program READY, CLK, ADV for ASync mode - * # config output - */ - - /* - * # CRAM CLOCK - * set GPIO0_TCR.G8 = 1 - * set GPIO0_OSRL.G8 = 0 - * set GPIO0_OR.G8 = 0 - */ - tmp_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, tmp_reg | 0x00800000); - tmp_reg = in32(GPIO0_OSRL); - out32(GPIO0_OSRL, tmp_reg & 0xffffbfff); - tmp_reg = in32(GPIO0_OR); - out32(GPIO0_OR, tmp_reg & 0xff7fffff); - - /* - * # CRAM Addreaa Valid - * set GPIO0_TCR.G10 = 1 - * set GPIO0_OSRL.G10 = 0 - * set GPIO0_OR.G10 = 0 - */ - tmp_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, tmp_reg | 0x00200000); - tmp_reg = in32(GPIO0_OSRL); - out32(GPIO0_OSRL, tmp_reg & 0xfffffbff); - tmp_reg = in32(GPIO0_OR); - out32(GPIO0_OR, tmp_reg & 0xffdfffff); - - /* - * # config input (EBC_WAIT) - * set GPIO0_ISR1L.G9 = 1 - * set GPIO0_TCR.G9 = 0 - */ - tmp_reg = in32(GPIO0_ISR1L); - out32(GPIO0_ISR1L, tmp_reg | 0x00001000); - tmp_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, tmp_reg & 0xffbfffff); - - /* - * # config CS4 from GPIO - * set GPIO0_TCR.G0 = 1 - * set GPIO0_OSRL.G0 = 1 - */ - tmp_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, tmp_reg | 0x80000000); - tmp_reg = in32(GPIO0_OSRL); - out32(GPIO0_OSRL, tmp_reg | 0x40000000); - - /* - * #2. EBC in Async mode - * # set EBC0_PB1AP = 0x078f0ec0 - * set EBC0_PB1AP = 0x078f1ec0 - * set EBC0_PB2AP = 0x078f1ec0 - */ - mtebc(pb1ap, 0x078F1EC0); - mtebc(pb2ap, 0x078F1EC0); - - /* - * #set EBC0_PB1CR = 0x000bc000 - * #enable CS2 for CRAM - * set EBC0_PB2CR = 0x020bc000 - */ - mtebc(pb1cr, 0x000BC000); - mtebc(pb2cr, 0x020BC000); - - /* - * #3. set CRAM in Sync mode - * #exec cm_bcr_write.cmd { 0x701f } - * #3. set CRAM in Sync mode (full drv strength) - * exec cm_bcr_write.cmd { 0x701F } - */ - cram_wr_val = 0x7012; /* CRAM burst setting */ - cram_bcr_write(cram_wr_val); - - /* - * #4. EBC in Sync mode - * #set EBC0_PB1AP = 0x9f800fc0 - * #set EBC0_PB1AP = 0x900001c0 - * set EBC0_PB2AP = 0x9C0201c0 - * set EBC0_PB2AP = 0x9C0201c0 - */ - mtebc(pb1ap, 0x9C0201C0); - mtebc(pb2ap, 0x9C0201C0); - - /* - * #5. EBC need to program READY, CLK, ADV for Sync mode - * # config output - * set GPIO0_TCR.G8 = 1 - * set GPIO0_OSRL.G8 = 1 - * set GPIO0_TCR.G10 = 1 - * set GPIO0_OSRL.G10 = 1 - */ - tmp_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, tmp_reg | 0x00800000); - tmp_reg = in32(GPIO0_OSRL); - out32(GPIO0_OSRL, tmp_reg | 0x00004000); - tmp_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, tmp_reg | 0x00200000); - tmp_reg = in32(GPIO0_OSRL); - out32(GPIO0_OSRL, tmp_reg | 0x00000400); - - /* - * # config input - * set GPIO0_ISR1L.G9 = 1 - * set GPIO0_TCR.G9 = 0 - */ - tmp_reg = in32(GPIO0_ISR1L); - out32(GPIO0_ISR1L, tmp_reg | 0x00001000); - tmp_reg = in32(GPIO0_TCR); - out32(GPIO0_TCR, tmp_reg & 0xffbfffff); - - /* - * # config EBC to use RDY - * set SDR0_ULTRA0.EBCREN = 1 - */ - mfsdr(sdrultra0, tmp_reg); - mtsdr(sdrultra0, tmp_reg | 0x04000000); - - /* - * set EPLD0_MUX_CTL.OESPR3 = 0 - */ - mtspr(SPRG7, LOAK_CRAM); /* "CRAM" */ - } /* if (already_inited != 1) */ - - return (64 * 1024 * 1024); -} - -/****** - * return 0 if not PSRAM - * return 1 if is PSRAM - ******/ -static int is_psram(u32 addr) -{ - u32 test_pattern = 0xdeadbeef; - volatile u32 readback; - - if (addr == CFG_SDRAM_BASE) { - /* This is to temp enable OE for PSRAM */ - out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f); - udelay(10000); - } - - out32(addr, test_pattern); - asm volatile(" sync"); - asm volatile(" eieio"); - - readback = (volatile u32) in32(addr); - asm volatile(" sync"); - asm volatile(" eieio"); - if (readback == test_pattern) { - return 1; - } else { - return 0; - } -} - -static long int psram_init(void) +long int initdram(int board_type) { - u32 readback; - long psramsize = 0; - int i; - - /* This is to temp enable OE for PSRAM */ - out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f); - udelay(10000); + u32 val; - /* - * PSRAM bank 1: read then write to address 0x00000000 - */ - for (i = 0; i < 100; i++) { - if (is_psram(CFG_SDRAM_BASE + (i*256)) == 1) { - readback = PSRAM_PASS; - } else { - readback = PSRAM_FAIL; - break; - } - } - if (readback == PSRAM_PASS) { - debug("psram_init(bank0): pass\n"); - psramsize = (16 * 1024 * 1024); - } else { - debug("psram_init(bank0): fail\n"); - return 0; - } + /* 1. EBC need to program READY, CLK, ADV for ASync mode */ + gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0); + gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0); + gpio_config(CFG_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0); + gpio_config(CFG_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG); -#if 0 - /* - * PSRAM bank 1: read then write to address 0x01000000 - */ - for (i = 0; i < 100; i++) { - if (is_psram((1 << 24) + (i*256)) == 1) { - readback = PSRAM_PASS; - } else { - readback = PSRAM_FAIL; - break; - } - } - if (readback == PSRAM_PASS) { - debug("psram_init(bank1): pass\n"); - psramsize = psramsize + (16 * 1024 * 1024); - } -#endif + /* 2. EBC in Async mode */ + mtebc(pb1ap, 0x078F1EC0); + mtebc(pb2ap, 0x078F1EC0); + mtebc(pb1cr, 0x000BC000); + mtebc(pb2cr, 0x020BC000); - mtspr(SPRG7, LOAK_PSRAM); /* "PSRA" - PSRAM */ + /* 3. Set CRAM in Sync mode */ + cram_bcr_write(0x7012); /* CRAM burst setting */ - return psramsize; -} + /* 4. EBC in Sync mode */ + mtebc(pb1ap, 0x9C0201C0); + mtebc(pb2ap, 0x9C0201C0); -long int initdram(int board_type) -{ - long int sram_size; - u32 cram_inited; + /* Set GPIO pins back to alternate function */ + gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG); + gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG); - /* Determine Attached Memory Expansion Card*/ - cram_inited = is_cram(); - if (cram_inited != 0) { /* CRAM */ - debug("CRAM Expansion Card attached\n"); - sram_size = cram_init(cram_inited); - } else if (is_psram(CFG_SDRAM_BASE+4) == 1) { /* PSRAM */ - debug("PSRAM Expansion Card attached\n"); - sram_size = psram_init(); - } else { /* no SRAM */ - debug("No Memory Card Attached!!\n"); - sram_size = 0; - } + /* Config EBC to use RDY */ + mfsdr(sdrultra0, val); + mtsdr(sdrultra0, val | 0x04000000); - return sram_size; + return (CFG_MBYTES_RAM << 20); } int testdram(void) diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds index be030923b..b08c9994b 100644 --- a/board/amcc/acadia/u-boot.lds +++ b/board/amcc/acadia/u-boot.lds @@ -62,19 +62,6 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/serial.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/environment.o(.text)*/ *(.text) *(.fixup) diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index c93ba6e3c..b5bb14580 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -23,6 +23,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/gpio.h> #include <spd_sdram.h> #include <ppc440.h> #include "bamboo.h" diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h index 1ce6366da..447486297 100644 --- a/board/amcc/bamboo/bamboo.h +++ b/board/amcc/bamboo/bamboo.h @@ -264,19 +264,9 @@ #define TRUE 1 #define FALSE 0 -#define GPIO_GROUP_MAX 2 -#define GPIO_MAX 32 -#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */ -#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */ -#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */ -#define GPIO_MASK 0xC0000000 /* GPIO_MASK */ -#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */ - /* For the other GPIO number, you must shift */ - #define GPIO0 0 #define GPIO1 1 - /*#define MAX_SELECTION_NB CORE_NB */ #define MAX_CORE_SELECT_NB 22 diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c index 684f6a586..439be4fa9 100644 --- a/board/amcc/katmai/cmd_katmai.c +++ b/board/amcc/katmai/cmd_katmai.c @@ -27,6 +27,9 @@ #include <i2c.h> #include <asm/byteorder.h> +#define CONFIG_STRESS /* enable 667 MHz CPU freq selection */ +#define DEBUG + static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { uchar chip; @@ -49,55 +52,28 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else chip = IIC0_ALT_BOOTPROM_ADDR; - do { - printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n"); - nbytes = readline (" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if ((strcmp(console_buffer, "33") != 0) & - (strcmp(console_buffer, "66") != 0)) - nbytes=0; - - strcpy(sysClock, console_buffer); - - } while (nbytes == 0); + /* on Katmai SysClk is always 33MHz */ + strcpy(sysClock, "33"); do { - if (strcmp(sysClock, "66") == 0) { - printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n"); - } else { #ifdef CONFIG_STRESS - printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n"); + printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n"); #else - printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n"); + printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n"); #endif - } nbytes = readline (" ? "); if (strcmp(console_buffer, "quit") == 0) return 0; - if (strcmp(sysClock, "66") == 0) { - if ((strcmp(console_buffer, "400") != 0) & - (strcmp(console_buffer, "533") != 0) -#ifdef CONFIG_STRESS - & (strcmp(console_buffer, "667") != 0) -#endif - ) { - nbytes = 0; - } - } else { - if ((strcmp(console_buffer, "400") != 0) & - (strcmp(console_buffer, "500") != 0) & - (strcmp(console_buffer, "533") != 0) + if ((strcmp(console_buffer, "400") != 0) && + (strcmp(console_buffer, "500") != 0) && + (strcmp(console_buffer, "533") != 0) #ifdef CONFIG_STRESS - & (strcmp(console_buffer, "667") != 0) + && (strcmp(console_buffer, "667") != 0) #endif - ) { - nbytes = 0; - } + ) { + nbytes = 0; } strcpy(cpuClock, console_buffer); @@ -124,13 +100,13 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; if (strcmp(cpuClock, "400") == 0) { - if ((strcmp(console_buffer, "100") != 0) & + if ((strcmp(console_buffer, "100") != 0) && (strcmp(console_buffer, "133") != 0)) nbytes = 0; } #ifdef CONFIG_STRESS if (strcmp(cpuClock, "667") == 0) { - if ((strcmp(console_buffer, "133") != 0) & + if ((strcmp(console_buffer, "133") != 0) && (strcmp(console_buffer, "166") != 0)) nbytes = 0; } @@ -147,9 +123,9 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (strcmp(console_buffer, "quit") == 0) return 0; - if ((strcmp(console_buffer, "33") != 0) & - (strcmp(console_buffer, "66") != 0) & - (strcmp(console_buffer, "100") != 0) & + if ((strcmp(console_buffer, "33") != 0) && + (strcmp(console_buffer, "66") != 0) && + (strcmp(console_buffer, "100") != 0) && (strcmp(console_buffer, "133") != 0)) { nbytes = 0; } @@ -176,11 +152,11 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } while (nbytes == 0); if (strcmp(sysClock, "33") == 0) { - if ((strcmp(cpuClock, "400") == 0) & + if ((strcmp(cpuClock, "400") == 0) && (strcmp(plbClock, "100") == 0)) data = 0x8678c206; - if ((strcmp(cpuClock, "400") == 0) & + if ((strcmp(cpuClock, "400") == 0) && (strcmp(plbClock, "133") == 0)) data = 0x8678c2c6; @@ -189,42 +165,16 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if ((strcmp(cpuClock, "533") == 0)) data = 0x87790252; - #ifdef CONFIG_STRESS - if ((strcmp(cpuClock, "667") == 0) & + if ((strcmp(cpuClock, "667") == 0) && (strcmp(plbClock, "133") == 0)) data = 0x87794256; - if ((strcmp(cpuClock, "667") == 0) & + if ((strcmp(cpuClock, "667") == 0) && (strcmp(plbClock, "166") == 0)) data = 0x87794206; - -#endif - } - if (strcmp(sysClock, "66") == 0) { - if ((strcmp(cpuClock, "400") == 0) & - (strcmp(plbClock, "100") == 0)) - data = 0x84706206; - - if ((strcmp(cpuClock, "400") == 0) & - (strcmp(plbClock, "133") == 0)) - data = 0x847062c6; - - if ((strcmp(cpuClock, "533") == 0)) - data = 0x85708206; - -#ifdef CONFIG_STRESS - if ((strcmp(cpuClock, "667") == 0) & - (strcmp(plbClock, "133") == 0)) - data = 0x8570a256; - - if ((strcmp(cpuClock, "667") == 0) & - (strcmp(plbClock, "166") == 0)) - data = 0x8570a206; - #endif } - #ifdef DEBUG printf(" pin strap0 to write in i2c = %x\n", data); #endif /* DEBUG */ @@ -233,19 +183,20 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf("Error writing strap0 in %s\n", argv[2]); if (strcmp(pcixClock, "33") == 0) - data = 0x00000701; + data = 0x000007E1; if (strcmp(pcixClock, "66") == 0) - data = 0x00000601; + data = 0x000006E1; if (strcmp(pcixClock, "100") == 0) - data = 0x00000501; + data = 0x000005E1; if (strcmp(pcixClock, "133") == 0) - data = 0x00000401; + data = 0x000004E1; if (strcmp(plbClock, "166") == 0) - data |= 0x05950000; +/* data |= 0x05950000; */ /* this set's DDR2 clock == PLB clock */ + data |= 0x05A50000; /* this set's DDR2 clock == 2 * PLB clock */ else data |= 0x05A50000; diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S index 6b024eec4..5202ae694 100644 --- a/board/amcc/katmai/init.S +++ b/board/amcc/katmai/init.S @@ -103,7 +103,7 @@ tlbtabB: tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_ACE_BASE, SZ_1K, 0xE0000000, 4,AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_ACE_BASE, SZ_1K, CFG_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index fbf1a98ab..286bdc1f2 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -27,6 +27,7 @@ #include <asm/processor.h> #include <i2c.h> #include <asm-ppc/io.h> +#include <asm-ppc/gpio.h> #include "../cpu/ppc4xx/440spe_pcie.h" diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index daaffe06d..930fa71cb 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -363,8 +363,8 @@ int checkboard(void) printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); #endif - rev = *(u8 *)(CFG_CPLD + 0); - val = *(u8 *)(CFG_CPLD + 5) & 0x01; + rev = *(u8 *)(CFG_BCSR_BASE + 0); + val = *(u8 *)(CFG_BCSR_BASE + 5) & 0x01; printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); if (s != NULL) { diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile index 155d46ac9..8a15713cc 100644 --- a/board/atmel/atstk1000/Makefile +++ b/board/atmel/atstk1000/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)lib$(BOARD).a -COBJS := $(BOARD).o flash.o +COBJS := $(BOARD).o flash.o eth.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c index 4d737d293..6618963cc 100644 --- a/board/atmel/atstk1000/atstk1000.c +++ b/board/atmel/atstk1000/atstk1000.c @@ -23,6 +23,8 @@ #include <asm/io.h> #include <asm/sdram.h> +#include <asm/arch/gpio.h> +#include <asm/arch/hmatrix2.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,9 +42,27 @@ static const struct sdram_info sdram = { .txsr = 5, }; -void board_init_memories(void) +int board_early_init_f(void) { - gd->sdram_size = sdram_init(&sdram); + /* Set the SDRAM_ENABLE bit in the HEBI SFR */ + hmatrix2_writel(SFR4, 1 << 1); + + gpio_enable_ebi(); + gpio_enable_usart1(); +#if defined(CONFIG_MACB) + gpio_enable_macb0(); + gpio_enable_macb1(); +#endif +#if defined(CONFIG_MMC) + gpio_enable_mmci(); +#endif + + return 0; +} + +long int initdram(int board_type) +{ + return sdram_init(&sdram); } void board_init_info(void) diff --git a/cpu/at32ap/at32ap7000/hebi.c b/board/atmel/atstk1000/eth.c index 3b32adf1e..3a7916efe 100644 --- a/cpu/at32ap/at32ap7000/hebi.c +++ b/board/atmel/atstk1000/eth.c @@ -1,5 +1,7 @@ /* - * Copyright (C) 2006 Atmel Corporation + * Copyright (C) 2005-2006 Atmel Corporation + * + * Ethernet initialization for the ATSTK1000 starterkit * * See file CREDITS for list of people who contributed to this * project. @@ -21,18 +23,16 @@ */ #include <common.h> -#include <asm/io.h> - -#include <asm/arch/hmatrix2.h> #include <asm/arch/memory-map.h> -#include <asm/arch/platform.h> -void cpu_enable_sdram(void) -{ - const struct device *hmatrix; +extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); - hmatrix = get_device(DEVICE_HMATRIX); +#if defined(CONFIG_MACB) && (CONFIG_COMMANDS & CFG_CMD_NET) +void atstk1000_eth_initialize(bd_t *bi) +{ + int id = 0; - /* Set the SDRAM_ENABLE bit in the HEBI SFR */ - hmatrix2_writel(hmatrix, SFR4, 1 << 1); + macb_eth_initialize(id++, (void *)MACB0_BASE, bi->bi_phy_id[0]); + macb_eth_initialize(id++, (void *)MACB1_BASE, bi->bi_phy_id[1]); } +#endif diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c index 3aebf66ee..958f4dc33 100644 --- a/board/atmel/atstk1000/flash.c +++ b/board/atmel/atstk1000/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init(void) gd->bd->bi_flashstart = CFG_FLASH_BASE; gd->bd->bi_flashsize = CFG_FLASH_SIZE; - gd->bd->bi_flashoffset = __edata_lma - _text; + gd->bd->bi_flashoffset = _edata - _text; flash_info[0].size = CFG_FLASH_SIZE; flash_info[0].sector_count = 135; diff --git a/board/atmel/atstk1000/u-boot.lds b/board/atmel/atstk1000/u-boot.lds index ef89ea4df..34e347aec 100644 --- a/board/atmel/atstk1000/u-boot.lds +++ b/board/atmel/atstk1000/u-boot.lds @@ -40,35 +40,38 @@ SECTIONS } . = ALIGN(32); __flashprog_end = .; + _etext = .; - . = ALIGN(8); .rodata : { *(.rodata) *(.rodata.*) } - _etext = .; - __data_lma = ALIGN(8); - . = 0x24000000; + . = ALIGN(8); _data = .; - .data : AT(__data_lma) { + .data : { *(.data) *(.data.*) } . = ALIGN(4); __u_boot_cmd_start = .; - __u_boot_cmd_lma = __data_lma + (__u_boot_cmd_start - _data); - .u_boot_cmd : AT(__u_boot_cmd_lma) { + .u_boot_cmd : { KEEP(*(.u_boot_cmd)) } __u_boot_cmd_end = .; + . = ALIGN(4); + _got = .; + .got : { + *(.got) + } + _egot = .; + . = ALIGN(8); _edata = .; - __edata_lma = __u_boot_cmd_lma + (_edata - __u_boot_cmd_start); - .bss : AT(__edata_lma) { + .bss : { *(.bss) *(.bss.*) } diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile index 4fe7d785f..e55c1a78a 100644 --- a/board/bf533-ezkit/Makefile +++ b/board/bf533-ezkit/Makefile @@ -1,7 +1,7 @@ # # U-boot - Makefile # -# Copyright (c) 2007 Analog Device Inc. +# Copyright (c) 2005-2007 Analog Device Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c index feaeb0069..1dd4a3fe2 100644 --- a/board/bf533-ezkit/bf533-ezkit.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -1,7 +1,7 @@ /* * U-boot - ezkit533.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h index e211918bc..bd9e859e7 100644 --- a/board/bf533-ezkit/flash-defines.h +++ b/board/bf533-ezkit/flash-defines.h @@ -1,7 +1,7 @@ /* * U-boot - flash-defines.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __FLASHDEFINES_H__ @@ -60,7 +60,7 @@ void reset_flash(void); int erase_flash(void); int erase_block_flash(int, unsigned long); void unlock_flash(long lOffset); -int write_data(long lStart, long lCount, long lStride, int *pnData); +int write_data(long lStart, long lCount, uchar *pnData); int FillData(long lStart, long lCount, long lStride, int *pnData); int read_data(long lStart, long lCount, long lStride, int *pnData); int read_flash(long nOffset, int *pnValue); diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c index 067a26090..299cdbae7 100644 --- a/board/bf533-ezkit/flash.c +++ b/board/bf533-ezkit/flash.c @@ -1,7 +1,7 @@ /* * U-boot - flash.c Flash driver for PSD4256GV * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. * * (C) Copyright 2000-2004 @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <asm/io.h> @@ -178,63 +178,66 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) { int ret; - - ret = write_data(addr, cnt, 1, (int *)src); + int d; + if (addr % 2) { + read_flash(addr - 1 - CFG_FLASH_BASE, &d); + d = (int)((d & 0x00FF) | (*src++ << 8)); + ret = write_data(addr - 1, 2, (uchar *) & d); + if (ret == FLASH_FAIL) + return ERR_NOT_ERASED; + ret = write_data(addr + 1, cnt - 1, src); + } else + ret = write_data(addr, cnt, src); if (ret == FLASH_FAIL) return ERR_NOT_ERASED; return FLASH_SUCCESS; } -int write_data(long lStart, long lCount, long lStride, int *pnData) +int write_data(long lStart, long lCount, uchar * pnData) { long i = 0; - int j = 0; unsigned long ulOffset = lStart - CFG_FLASH_BASE; int d; - int iShift = 0; - int iNumWords = 2; - int nLeftover = lCount % 4; int nSector = 0; + int flag = 0; - for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { - for (iShift = 0, j = 0; (j < iNumWords); - j++, ulOffset += (lStride * 2)) { - if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) { - printf - ("Invalid locations, Try writing to another location \n"); - return FLASH_FAIL; - } - get_sector_number(ulOffset, &nSector); - read_flash(ulOffset, &d); - if (d != 0xffff) { - printf - ("Flash not erased at offset 0x%x Please erase to reprogram \n", - ulOffset); - return FLASH_FAIL; - } - unlock_flash(ulOffset); - if (write_flash(ulOffset, (pnData[i] >> iShift)) < 0) { - printf("Error programming the flash \n"); - return FLASH_FAIL; - } - iShift += 16; - } + if (lCount % 2) { + flag = 1; + lCount = lCount - 1; } - if (nLeftover > 0) { - if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) + + for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) { + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset, &d); + if (d != 0xffff) { + printf + ("Flash not erased at offset 0x%x Please erase to reprogram \n", + ulOffset); return FLASH_FAIL; + } + unlock_flash(ulOffset); + d = (int)(pnData[i] | pnData[i + 1] << 8); + write_flash(ulOffset, d); + if (poll_toggle_bit(ulOffset) < 0) { + printf("Error programming the flash \n"); + return FLASH_FAIL; + } + if ((i > 0) && (!(i % AFP_SectorSize2))) + printf("."); + } + if (flag) { get_sector_number(ulOffset, &nSector); read_flash(ulOffset, &d); if (d != 0xffff) { printf - ("Flash already programmed. Please erase to reprogram \n"); - printf("uloffset = 0x%x \t d = 0x%x\n", ulOffset, d); + ("Flash not erased at offset 0x%x Please erase to reprogram \n", + ulOffset); return FLASH_FAIL; } unlock_flash(ulOffset); - if (write_flash(ulOffset, pnData[i]) < 0) { + d = (int)(pnData[i] | (d & 0xFF00)); + write_flash(ulOffset, d); + if (poll_toggle_bit(ulOffset) < 0) { printf("Error programming the flash \n"); return FLASH_FAIL; } diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h index 97765165f..cc654b895 100644 --- a/board/bf533-ezkit/psd4256.h +++ b/board/bf533-ezkit/psd4256.h @@ -1,7 +1,7 @@ /* * U-boot - psd4256.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile index 8223d591c..02c941b5a 100644 --- a/board/bf533-stamp/Makefile +++ b/board/bf533-stamp/Makefile @@ -1,7 +1,7 @@ # # U-boot - Makefile # -# Copyright (c) 2007 Analog Device Inc. +# Copyright (c) 2005-2007 Analog Device Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 2f6e75187..b9dff9917 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -1,7 +1,7 @@ /* * U-boot - stamp.c STAMP board specific routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/bf533-stamp/bf533-stamp.h b/board/bf533-stamp/bf533-stamp.h index b2b51aa2b..1e58e4754 100644 --- a/board/bf533-stamp/bf533-stamp.h +++ b/board/bf533-stamp/bf533-stamp.h @@ -1,7 +1,7 @@ /* * U-boot - stamp.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __STAMP_H__ diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index cc4e9985f..47f7c9edf 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -1,7 +1,7 @@ /* * U-boot - BF537.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h index f19e171d0..acc1e8638 100644 --- a/board/bf537-stamp/flash-defines.h +++ b/board/bf537-stamp/flash-defines.h @@ -1,7 +1,7 @@ /* * U-boot - flash-defines.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __FLASHDEFINES_H__ diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c index 42dcf062b..ed8584147 100644 --- a/board/bf537-stamp/flash.c +++ b/board/bf537-stamp/flash.c @@ -1,7 +1,7 @@ /* * U-boot - flash.c Flash driver for PSD4256GV * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. * * (C) Copyright 2000-2004 @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <malloc.h> diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c index 71281c013..989b0194c 100644 --- a/board/bf561-ezkit/bf561-ezkit.c +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -2,7 +2,7 @@ * U-boot - ezkit561.c * * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl> - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 700c9d932..296099843 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -42,6 +42,53 @@ #include "mt48lc16m16a2-75.h" # endif #endif + +#ifdef CONFIG_LITE5200B_PM +/* u-boot part of low-power mode implementation */ +#define SAVED_ADDR (*(void **)0x00000000) +#define PSC2_4 0x02 + +void lite5200b_wakeup(void) +{ + unsigned char wakeup_pin; + void (*linux_wakeup)(void); + + /* check PSC2_4, if it's down "QT" is signaling we have a wakeup + * from low power mode */ + *(vu_char *)MPC5XXX_WU_GPIO_ENABLE = PSC2_4; + __asm__ volatile ("sync"); + + wakeup_pin = *(vu_char *)MPC5XXX_WU_GPIO_DATA_I; + if (wakeup_pin & PSC2_4) + return; + + /* acknowledge to "QT" + * by holding pin at 1 for 10 uS */ + *(vu_char *)MPC5XXX_WU_GPIO_DIR = PSC2_4; + __asm__ volatile ("sync"); + *(vu_char *)MPC5XXX_WU_GPIO_DATA_O = PSC2_4; + __asm__ volatile ("sync"); + udelay(10); + + /* put ram out of self-refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x80000000; /* mode_en */ + __asm__ volatile ("sync"); + *(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x50000000; /* cke ref_en */ + __asm__ volatile ("sync"); + *(vu_long *)MPC5XXX_SDRAM_CTRL &= ~0x80000000; /* !mode_en */ + __asm__ volatile ("sync"); + udelay(10); /* wait a bit */ + + /* jump back to linux kernel code */ + linux_wakeup = SAVED_ADDR; + printf("\n\nLooks like we just woke, transferring control to 0x%08lx\n", + linux_wakeup); + linux_wakeup(); +} +#else +#define lite5200b_wakeup() +#endif + #ifndef CFG_RAMBOOT static void sdram_start (int hi_addr) { @@ -208,6 +255,8 @@ long int initdram (int board_type) __asm__ volatile ("sync"); } + lite5200b_wakeup(); + return dramsize + dramsize2; } diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c index 98b86d183..726366ddf 100644 --- a/board/mcc200/lcd.c +++ b/board/mcc200/lcd.c @@ -180,10 +180,6 @@ void lcd_enable (void) break; udelay (PSOC_WAIT_TIME); } - if (!retries) { - printf ("%s Warning: PSoC doesn't respond on " - "RTS NEGATE\n", __FUNCTION__); - } return; } diff --git a/board/mpc7448hpc2/Makefile b/board/mpc7448hpc2/Makefile new file mode 100644 index 000000000..e3d757d5d --- /dev/null +++ b/board/mpc7448hpc2/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o tsi108_init.o +SOBJS := asm_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +.PHONY: distclean +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude ($obj).depend + +######################################################################### diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S new file mode 100644 index 000000000..a7a40a134 --- /dev/null +++ b/board/mpc7448hpc2/asm_init.S @@ -0,0 +1,918 @@ +/* + * (C) Copyright 2004-05; Tundra Semiconductor Corp. + * + * Added automatic detect of SDC settings + * Copyright (c) 2005 Freescale Semiconductor, Inc. + * Maintainer tie-fei.zang@freescale.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * FILENAME: asm_init.s + * + * Originator: Alex Bounine + * + * DESCRIPTION: + * Initialization code for the Tundra Tsi108 bridge chip + * + */ + +#include <config.h> +#include <version.h> + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> +#include <asm/processor.h> + +#include <tsi108.h> + +/* + * Build Configuration Options + */ + +/* #define DISABLE_PBM disables usage of PB Master */ +/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */ +/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */ + +/* + * Hardcoded SDC settings + */ + +#ifdef SDC_HARDCODED_INIT + +/* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */ + +#define VAL_SD_REFRESH (0x61A) +#define VAL_SD_TIMING (0x0308336b) +#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */ +#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */ + +#endif /* SDC_HARDCODED_INIT */ + +/* + CPU Configuration: + + CPU Address and Data Parity enables. + +#define CPU_AP +#define CPU_DP +*/ + +/* + * Macros + * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are + * expected to work correctly for the CSR space within 32KB range. + * + * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant. + * These macros are absolutely identical except their names. This difference + * is provided intentionally for better readable code. + */ + +#define LOAD_PTR(reg,const32) \ + addis reg,r0,const32@h; ori reg,reg,const32@l + +#define LOAD_U32(reg,const32) \ + addis reg,r0,const32@h; ori reg,reg,const32@l + +/* LOADMEM initializes a register with the contents of a specified 32-bit + * memory location, usually a CSR value. + */ + +#define LOAD_MEM(reg,addr32) \ + addis reg,r0,addr32@ha; lwz reg,addr32@l(reg) + +#ifndef SDC_HARDCODED_INIT +sdc_clk_sync: + /* MHz: 0,0,183,100,133,167,200,233 */ + .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */ +#endif + +/* + * board_asm_init() - early initialization function. Coded to be portable to + * dual-CPU configuration. + * Checks CPU number and performs board HW initialization if called for CPU0. + * Registers used: r3,r4,r5,r6,r19,r29 + * + * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108 + * and the rest of the board. Current implementation demonstrates two + * possible ways to identify CPU number: + * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM. + * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108. + */ + + .globl board_asm_init +board_asm_init: + mflr r19 /* Save LR to be able return later. */ + bl icache_enable /* Enable icache to reduce reads from flash. */ + +/* Initialize pointer to Tsi108 register space */ + + LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ + ori r4,r29,TSI108_PB_REG_OFFSET + +/* Check Processor Version Number */ + + mfspr r3, PVR + rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */ + + cmpli 0,0,r3,0x8000 /* MPC74xx */ + bne cont_brd_init + + /* + * For MPC744x/5x enable extended BATs[4-7] + * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1 + * to disable prefetch + */ + + mfspr r5, HID0 + oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */ + ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */ + mtspr HID0, r5 + isync + sync + + /* Adding code to disable external interventions in MPX bus mode */ + mfspr r3, 1014 + oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */ + mtspr 1014, r3 + isync + sync + + /* Sri: code to enable FP unit */ + mfmsr r3 + ori r3, r3, 0x2000 + mtmsr r3 + isync + sync + + /* def CONFIG_DUAL_CPU + * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number. + */ +#if(1) + mfspr r3,1014 /* read MSSCR0 */ + rlwinm. r3,r3,27,31,31 /* get processor ID number */ + mtspr SPRN_PIR,r3 /* Save CPU ID */ + sync + bne init_done + b do_tsi108_init + +cont_brd_init: + + /* An alternative method of checking the processor number (in addition + * to configuration using MSSCR0[ID] bit on MPC74xx). + * Good for IBM PPC750FX/GX. + */ + + lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */ + rlwinm. r3,r3,24,31,31 /* get processor ID number */ + bne init_done +#else + +cont_brd_init: + +#endif /* CONFIG_DUAL_CPU */ + + /* Initialize Tsi108 chip */ + +do_tsi108_init: + + /* + * Adjust HLP/Flash parameters. By default after reset the HLP port is + * set to support slow devices. Better performance can be achived when + * an optimal parameters are used for specific EPROM device. + * NOTE: This should be performed ASAP for the emulation platform + * because it has 5MHz HLP clocking. + */ + +#ifdef CONFIG_TSI108EMU + ori r4,r29,TSI108_HLP_REG_OFFSET + LOAD_U32(r5,0x434422c0) + stw r5,0x08(r4) /* set HLP B0_CTRL0 */ + sync + LOAD_U32(r5,0xd0012000) + stw r5,0x0c(r4) /* set HLP B0_CTRL1 */ + sync +#endif + + /* Initialize PB interface. */ + + ori r4,r29,TSI108_PB_REG_OFFSET + +#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE) + /* Relocate (if required) Tsi108 registers. Set new value for + * PB_REG_BAR: + * Note we are in the 32-bit address mode. + */ + LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */ + stw r5,PB_REG_BAR(r4) + andis. r29,r5,0xFFFF + sync + ori r4,r29,TSI108_PB_REG_OFFSET +#endif + + /* Set PB Slave configuration register */ + + LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */ + lwz r3, PB_RSR(r4) /* get PB bus mode */ + xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */ + rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */ + stw r5,PB_SCR(r4) + sync + + /* Configure PB Arbiter */ + + lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */ +#ifdef DISABLE_PBM + ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */ +#endif + andc r5,r5,r3 /* Clear the masked bit fields */ + ori r5,r5,0x0001 /* Set pipeline depth */ + stw r5,PB_ARB_CTRL(r4) + +#if (0) /* currently using the default settings for PBM after reset */ + LOAD_U32(r5,0x) /* value for PB_MCR */ + stw r5,PB_MCR(r4) + sync + + LOAD_U32(r5,0x) /* value for PB_MCMD */ + stw r5,PB_MCMD(r4) + sync +#endif + + /* Disable or enable PVT based on processor bus frequency + * 1. Read CG_PWRUP_STATUS register field bits 18,17,16 + * 2. See if the value is < or > 133mhz (18:16 = 100) + * 3. If > enable PVT + */ + + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,16,29,31 + + cmpi 0,0,r3,0x0004 + bgt sdc_init + +#ifndef CONFIG_TSI108EMU + /* FIXME: Disable PB calibration control for any real Tsi108 board */ + li r5,0x0101 /* disable calibration control */ + stw r5,PB_PVT_CTRL2(r4) + sync +#endif + + /* Initialize SDRAM controller. */ + +sdc_init: + +#ifndef SDC_HARDCODED_INIT + /* get SDC clock prior doing sdram controller autoconfig */ + ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */ + lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */ + rlwinm r3,r3,12,29,31 /* r3 - SD clk */ + lis r5,sdc_clk_sync@h + ori r5,r5,sdc_clk_sync@l + /* Sri: At this point check if r3 = 001. If yes, + * the memory frequency should be same as the + * MPX bus frequency + */ + cmpi 0,0,r3,0x0001 + bne get_nsec + lwz r6, CG_PWRUP_STATUS(r4) + rlwinm r6,r6,16,29,31 + mr r3,r6 + +get_nsec: + rlwinm r3,r3,2,0,31 + lwzx r9,r5,r3 /* get SD clk rate in nSec */ + /* ATTN: r9 will be used by SPD routine */ +#endif /* !SDC_HARDCODED_INIT */ + + ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */ + + /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */ + + LOAD_U32(r5,0x00) + stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */ +#ifdef ENABLE_SDRAM_ECC + li r5, 0x01 +#endif /* ENABLE_SDRAM_ECC */ + stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */ + sync + +#ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */ + + /* First read the CG_PWRUP_STATUS register to get the + * memory speed from bits 22,21,20 + */ + + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,12,29,31 + + /* Now first check for 166, then 200, or default */ + + cmpi 0,0,r3,0x0005 + bne check_for_200mhz + + /* set values for 166 Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x00000515) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03073368) + stw r5,SD_TIMING(r4) + sync + + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ +#ifdef SDC_AUTOPRECH_EN + oris r5,r5,0x0001 /* set auto precharge EN bit */ +#endif + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync + + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ +#ifdef SDC_AUTOPRECH_EN + oris r5,r5,0x0001 /* set auto precharge EN bit */ +#endif + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync + + b sdc_init_done + +check_for_200mhz: + + cmpi 0,0,r3,0x0006 + bne set_default_values + + /* set values for 200Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x0000061a) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03083348) + stw r5,SD_TIMING(r4) + sync + + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ +#ifdef SDC_AUTOPRECH_EN + oris r5,r5,0x0001 /* set auto precharge EN bit */ +#endif + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync + + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ +#ifdef SDC_AUTOPRECH_EN + oris r5,r5,0x0001 /* set auto precharge EN bit */ +#endif + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync + + b sdc_init_done + +set_default_values: + + /* Set refresh rate and timing parameters */ + LOAD_U32(r5,VAL_SD_REFRESH) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,VAL_SD_TIMING) + stw r5,SD_TIMING(r4) + sync + + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ +#ifdef SDC_AUTOPRECH_EN + oris r5,r5,0x0001 /* set auto precharge EN bit */ +#endif + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync + + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ +#ifdef SDC_AUTOPRECH_EN + oris r5,r5,0x0001 /* set auto precharge EN bit */ +#endif + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync +#else /* !SDC_HARDCODED_INIT */ + bl tsi108_sdram_spd /* automatically detect SDC settings */ +#endif /* SDC_HARDCODED_INIT */ + +sdc_init_done: + +#ifdef DISABLE_PBM + LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */ +#else + LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */ +#endif /* DISABLE_PBM */ + +#ifdef CONFIG_TSI108EMU + oris r5,r5,0x0010 /* set EMULATION_MODE bit */ +#endif + + stw r5,SD_CTRL(r4) + eieio + sync + + /* Enable SDRAM access */ + + oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */ + stw r5,SD_CTRL(r4) + sync + +wait_init_complete: + lwz r5,SD_STATUS(r4) + andi. r5,r5,0x0001 + /* wait until SDRAM initialization is complete */ + beq wait_init_complete + + /* Map SDRAM into the processor bus address space */ + + ori r4,r29,TSI108_PB_REG_OFFSET + + /* Setup BARs associated with direct path PB<->SDRAM */ + + /* PB_SDRAM_BAR1: + * provides a direct path to the main system memory (cacheable SDRAM) + */ + + /* BA=0,Size=512MB, ENable, No Addr.Translation */ + LOAD_U32(r5, 0x00000011) + stw r5,PB_SDRAM_BAR1(r4) + sync + + /* Make sure that PB_SDRAM_BAR1 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR1(r4) + sync + + /* PB_SDRAM_BAR2: + * provides non-cacheable alias (via the direct path) to main + * system memory. + * Size = 512MB, ENable, Addr.Translation - ON, + * BA = 0x0_40000000, TA = 0x0_00000000 + */ + + LOAD_U32(r5, 0x40010011) + stw r5,PB_SDRAM_BAR2(r4) + sync + + /* Make sure that PB_SDRAM_BAR2 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR2(r4) + sync + +init_done: + + /* All done. Restore LR and return. */ + mtlr r19 + blr + +#if (0) + /* + * init_cpu1 + * This routine enables CPU1 on the dual-processor system. + * Now there is only one processor in the system + */ + + .global enable_cpu1 +enable_cpu1: + + lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */ + addi r3,r3,Tsi108_Base@l + lwz r3,0(r3) /* R3 = CSR Base Addr */ + ori r4,r3,TSI108_PB_REG_OFFSET + lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + ori r3,r3,0x0200 /* Set M1_EN bit */ + stw r3,PB_ARB_CTRL(r4) + + blr +#endif + + /* + * enable_EI + * Enable CPU core external interrupt + */ + + .global enable_EI +enable_EI: + mfmsr r3 + ori r3,r3,0x8000 /* set EE bit */ + mtmsr r3 + blr + + /* + * disable_EI + * Disable CPU core external interrupt + */ + + .global disable_EI +disable_EI: + mfmsr r3 + li r4,-32768 /* aka "li r4,0x8000" */ + andc r3,r3,r4 /* clear EE bit */ + mtmsr r3 + blr + +#ifdef ENABLE_SDRAM_ECC + /* enables SDRAM ECC */ + + .global enable_ECC +enable_ECC: + ori r4,r29,TSI108_SD_REG_OFFSET + lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */ + ori r3,r3,0x0001 /* Set ECC_EN bit */ + stw r3,SD_ECC_CTRL(r4) + blr + + /* + * clear_ECC_err + * Clears all pending SDRAM ECC errors + * (normally after SDRAM scrubbing/initialization) + */ + + .global clear_ECC_err +clear_ECC_err: + ori r4,r29,TSI108_SD_REG_OFFSET + ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */ + stw r3,SD_INT_STATUS(r4) + blr + +#endif /* ENABLE_SDRAM_ECC */ + +#ifndef SDC_HARDCODED_INIT + + /* SDRAM SPD Support */ +#define SD_I2C_CTRL1 (0x400) +#define SD_I2C_CTRL2 (0x404) +#define SD_I2C_RD_DATA (0x408) +#define SD_I2C_WR_DATA (0x40C) + + /* + * SDRAM SPD Support Macros + */ + +#define SPD_DIMM0 (0x00000100) +#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */ + +#define SPD_RDIMM (0x01) +#define SPD_UDIMM (0x02) + +#define SPD_CAS_3 0x8 +#define SPD_CAS_4 0x10 +#define SPD_CAS_5 0x20 + +#define ERR_NO_DIMM_FOUND (0xdb0) +#define ERR_TRAS_FAIL (0xdb1) +#define ERR_TRCD_FAIL (0xdb2) +#define ERR_TRP_FAIL (0xdb3) +#define ERR_TWR_FAIL (0xdb4) +#define ERR_UNKNOWN_PART (0xdb5) +#define ERR_NRANK_INVALID (0xdb6) +#define ERR_DIMM_SIZE (0xdb7) +#define ERR_ADDR_MODE (0xdb8) +#define ERR_RFRSH_RATE (0xdb9) +#define ERR_DIMM_TYPE (0xdba) +#define ERR_CL_VALUE (0xdbb) +#define ERR_TRFC_FAIL (0xdbc) + +/* READ_SPD requirements: + * byte - byte address in SPD device (0 - 255) + * r3 = will return data read from I2C Byte location + * r4 - unchanged (SDC base addr) + * r5 - clobbered in routine (I2C status) + * r10 - number of DDR slot where first SPD device is detected + */ + +#define READ_SPD(byte_num) \ + addis r3, 0, byte_num@l; \ + or r3, r3, r10; \ + ori r3, r3, 0x0A; \ + stw r3, SD_I2C_CTRL1(r4); \ + li r3, I2C_CNTRL2_START; \ + stw r3, SD_I2C_CTRL2(r4); \ + eieio; \ + sync; \ + li r3, 0x100; \ +1:; \ + addic. r3, r3, -1; \ + bne 1b; \ +2:; \ + lwz r5, SD_I2C_CTRL2(r4); \ + rlwinm. r3,r5,0,23,23; \ + bne 2b; \ + rlwinm. r3,r5,0,3,3; \ + lwz r3,SD_I2C_RD_DATA(r4) + +#define SPD_MIN_RFRSH (0x80) +#define SPD_MAX_RFRSH (0x85) + +refresh_rates: /* in nSec */ + .long 15625 /* Normal (0x80) */ + .long 3900 /* Reduced 0.25x (0x81) */ + .long 7800 /* Reduced 0.5x (0x82) */ + .long 31300 /* Extended 2x (0x83) */ + .long 62500 /* Extended 4x (0x84) */ + .long 125000 /* Extended 8x (0x85) */ + +/* + * tsi108_sdram_spd + * + * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data + * Uses registers: r4 - SDC base address (not changed) + * r9 - SDC clocking period in nSec + * Changes registers: r3,r5,r6,r7,r8,r10,r11 + */ + +tsi108_sdram_spd: + + li r10,SPD_DIMM0 + xor r11,r11,r11 /* DIMM Base Address: starts from 0 */ + +do_first_dimm: + + /* Program Refresh Rate Register */ + + READ_SPD(12) /* get Refresh Rate */ + beq check_next_slot + li r5, ERR_RFRSH_RATE + cmpi 0,0,r3,SPD_MIN_RFRSH + ble spd_fail + cmpi 0,0,r3,SPD_MAX_RFRSH + bgt spd_fail + addi r3,r3,-SPD_MIN_RFRSH + rlwinm r3,r3,2,0,31 + lis r5,refresh_rates@h + ori r5,r5,refresh_rates@l + lwzx r5,r5,r3 /* get refresh rate in nSec */ + divwu r5,r5,r9 /* calculate # of SDC clocks */ + stw r5,SD_REFRESH(r4) /* Set refresh rate */ + sync + + /* Program SD Timing Register */ + + li r7, 0 /* clear r7 prior parameter collection */ + + READ_SPD(20) /* get DIMM type: Registered or Unbuffered */ + beq spd_read_fail + li r5, ERR_DIMM_TYPE + cmpi 0,0,r3,SPD_UDIMM + beq do_cl + cmpi 0,0,r3,SPD_RDIMM + bne spd_fail + oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */ + +do_cl: + READ_SPD(18) /* Get CAS Latency */ + beq spd_read_fail + li r5,ERR_CL_VALUE + andi. r6,r3,SPD_CAS_3 + beq cl_4 + li r6,3 + b set_cl +cl_4: + andi. r6,r3,SPD_CAS_4 + beq cl_5 + li r6,4 + b set_cl +cl_5: + andi. r6,r3,SPD_CAS_5 + beq spd_fail + li r6,5 +set_cl: + rlwimi r7,r6,24,5,7 + + READ_SPD(30) /* Get tRAS */ + beq spd_read_fail + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 + beq set_tras + addi r6,r6,1 +set_tras: + li r5,ERR_TRAS_FAIL + cmpi 0,0,r6,0x0F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,16,12,15 + + READ_SPD(29) /* Get tRCD */ + beq spd_read_fail + /* right shift tRCD by 2 bits as per DDR2 spec */ + rlwinm r3,r3,30,2,31 + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 + beq set_trcd + addi r6,r6,1 +set_trcd: + li r5,ERR_TRCD_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,12,17,19 + + READ_SPD(27) /* Get tRP value */ + beq spd_read_fail + rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 + beq set_trp + addi r6,r6,1 +set_trp: + li r5,ERR_TRP_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,8,21,23 + + READ_SPD(36) /* Get tWR value */ + beq spd_read_fail + rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 + beq set_twr + addi r6,r6,1 +set_twr: + addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */ + li r5,ERR_TWR_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,5,24,26 + + READ_SPD(42) /* Get tRFC */ + beq spd_read_fail + li r5, ERR_TRFC_FAIL + /* Tsi108 spec: tRFC=(tRFC + 1)/2 */ + addi r3,r3,1 + rlwinm. r3,r3,31,1,31 /* divide by 2 */ + beq spd_fail + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 + beq set_trfc + addi r6,r6,1 +set_trfc: + cmpi 0,0,r6,0x1F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,0,27,31 + + stw r7,SD_TIMING(r4) + sync + + /* + * The following two registers are set on per-DIMM basis. + * The SD_REFRESH and SD_TIMING settings are common for both DIMMS + */ + +do_each_dimm: + + /* Program SDRAM DIMM Control Register */ + + li r7, 0 /* clear r7 prior parameter collection */ + + READ_SPD(13) /* Get Primary SDRAM Width */ + beq spd_read_fail + cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */ + beq do_nbank + oris r7,r7,0x0010 /* Set MEM_WIDTH bit */ + +do_nbank: + READ_SPD(17) /* Get Number of banks on SDRAM device */ + beq spd_read_fail + /* Grendel only distinguish betw. 4 or 8-bank memory parts */ + li r5,ERR_UNKNOWN_PART /* non-supported memory part */ + cmpi 0,0,r3,4 + beq do_nrank + cmpi 0,0,r3,8 + bne spd_fail + ori r7,r7,0x1000 + +do_nrank: + READ_SPD(5) /* Get # of Ranks */ + beq spd_read_fail + li r5,ERR_NRANK_INVALID + andi. r6,r3,0x7 /* Use bits [2..0] only */ + beq do_addr_mode + cmpi 0,0,r6,1 + bgt spd_fail + rlwimi r7,r6,8,23,23 + +do_addr_mode: + READ_SPD(4) /* Get # of Column Addresses */ + beq spd_read_fail + li r5, ERR_ADDR_MODE + andi. r3,r3,0x0f /* cut off reserved bits */ + cmpi 0,0,r3,8 + ble spd_fail + cmpi 0,0,r3,15 + bgt spd_fail + addi r6,r3,-8 /* calculate ADDR_MODE parameter */ + rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */ + +set_dimm_ctrl: +#ifdef SDC_AUTOPRECH_EN + oris r7,r7,0x0001 /* set auto precharge EN bit */ +#endif + ori r7,r7,1 /* set ENABLE bit */ + cmpi 0,0,r10,SPD_DIMM0 + bne 1f + stw r7,SD_D0_CTRL(r4) + sync + b set_dimm_bar +1: + stw r7,SD_D1_CTRL(r4) + sync + + + /* Program SDRAM DIMMx Base Address Register */ + +set_dimm_bar: + READ_SPD(5) /* get # of Ranks */ + beq spd_read_fail + andi. r7,r3,0x7 + addi r7,r7,1 + READ_SPD(31) /* Read DIMM rank density */ + beq spd_read_fail + rlwinm r5,r3,27,29,31 + rlwinm r6,r3,3,24,28 + or r5,r6,r5 /* r5 = Normalized Rank Density byte */ + lis r8, 0x0080 /* 128MB >> 4 */ + mullw r8,r8,r5 /* r8 = (rank_size >> 4) */ + mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */ + neg r7,r8 + rlwinm r7,r7,28,4,31 + or r7,r7,r11 /* set ADDR field */ + rlwinm r8,r8,12,20,31 + add r11,r11,r8 /* set Base Addr for next DIMM */ + + cmpi 0,0,r10,SPD_DIMM0 + bne set_dimm1_size + stw r7,SD_D0_BAR(r4) + sync + li r10,SPD_DIMM1 + READ_SPD(0) + bne do_each_dimm + b spd_done + +set_dimm1_size: + stw r7,SD_D1_BAR(r4) + sync +spd_done: + blr + +check_next_slot: + cmpi 0,0,r10,SPD_DIMM1 + beq spd_read_fail + li r10,SPD_DIMM1 + b do_first_dimm +spd_read_fail: + ori r3,r0,0xdead + b err_hung +spd_fail: + li r3,0x0bad + sync +err_hung: /* hang here for debugging */ + nop + nop + b err_hung + +#endif /* !SDC_HARDCODED_INIT */ diff --git a/board/mpc7448hpc2/config.mk b/board/mpc7448hpc2/config.mk new file mode 100644 index 000000000..2e58858c4 --- /dev/null +++ b/board/mpc7448hpc2/config.mk @@ -0,0 +1,28 @@ +# +# Copyright (c) 2005 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Flash address +TEXT_BASE = 0xFF000000 +# RAM address +#TEXT_BASE = 0x00400000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -maltivec -mabi=altivec -msoft-float diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c new file mode 100644 index 000000000..63c99de17 --- /dev/null +++ b/board/mpc7448hpc2/mpc7448hpc2.c @@ -0,0 +1,107 @@ +/* + * (C) Copyright 2005 Freescale Semiconductor, Inc. + * + * Roy Zang <tie-fei.zang@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * modifications for the Tsi108 Emul Board by avb@Tundra + */ + +/* + * board support/init functions for the + * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform). + */ + +#include <common.h> +#include <74xx_7xx.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +extern void ft_cpu_setup (void *blob, bd_t *bd); +#endif + +#undef DEBUG + +extern void flush_data_cache (void); +extern void invalidate_l1_instruction_cache (void); +extern void tsi108_init_f (void); + +int display_mem_map (void); + +void after_reloc (ulong dest_addr) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* + * Jump to the main U-Boot board init code + */ + board_init_r ((gd_t *) gd, dest_addr); + /* NOTREACHED */ +} + +/* + * Check Board Identity: + * report board type + */ + +int checkboard (void) +{ + int l_type = 0; + + printf ("BOARD: %s\n", CFG_BOARD_NAME); + return (l_type); +} + +/* + * Read Processor ID: + * + * report calling processor number + */ + +int read_pid (void) +{ + return 0; /* we are on single CPU platform for a while */ +} + +long int dram_size (int board_type) +{ + return 0x20000000; /* 256M bytes */ +} + +long int initdram (int board_type) +{ + return dram_size (board_type); +} + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup (void *blob, bd_t *bd) +{ + u32 *p; + int len; + + ft_cpu_setup (blob, bd); + + p = ft_get_prop (blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32 (bd->bi_memstart); + *p = cpu_to_be32 (bd->bi_memsize); + } +} +#endif diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c new file mode 100644 index 000000000..8a7efef77 --- /dev/null +++ b/board/mpc7448hpc2/tsi108_init.c @@ -0,0 +1,665 @@ +/***************************************************************************** + * (C) Copyright 2003; Tundra Semiconductor Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + *****************************************************************************/ + +/*---------------------------------------------------------------------------- + * FILENAME: tsi108_init.c + * + * Originator: Alex Bounine + * + * DESCRIPTION: + * Initialization code for the Tundra Tsi108 bridge chip + *---------------------------------------------------------------------------*/ + +#include <common.h> +#include <74xx_7xx.h> +#include <config.h> +#include <version.h> +#include <asm/processor.h> +#include <tsi108.h> + +extern void mpicInit (int verbose); + +/* + * Configuration Options + */ + +typedef struct { + ulong upper; + ulong lower; +} PB2OCN_LUT_ENTRY; + +PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = { + /* 0 - 7 */ + {0x00000000, 0x00000201}, /* PBA=0xE000_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE100_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE200_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE300_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE400_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE500_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE600_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE700_0000 -> PCI/X (Byte-Swap) */ + + /* 8 - 15 */ + {0x00000000, 0x00000201}, /* PBA=0xE800_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xE900_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xEA00_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xEB00_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xEC00_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xED00_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xEE00_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xEF00_0000 -> PCI/X (Byte-Swap) */ + + /* 16 - 23 */ + {0x00000000, 0x00000201}, /* PBA=0xF000_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF100_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF200_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF300_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF400_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF500_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF600_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF700_0000 -> PCI/X (Byte-Swap) */ + /* 24 - 31 */ + {0x00000000, 0x00000201}, /* PBA=0xF800_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xF900_0000 -> PCI/X (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xFA00_0000 -> PCI/X PCI I/O (Byte-Swap) */ + {0x00000000, 0x00000201}, /* PBA=0xFB00_0000 -> PCI/X PCI Config (Byte-Swap) */ + + {0x00000000, 0x02000240}, /* PBA=0xFC00_0000 -> HLP */ + {0x00000000, 0x01000240}, /* PBA=0xFD00_0000 -> HLP */ + {0x00000000, 0x03000240}, /* PBA=0xFE00_0000 -> HLP */ + {0x00000000, 0x00000240} /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/ +}; + +#ifdef CFG_CLK_SPREAD +typedef struct { + ulong ctrl0; + ulong ctrl1; +} PLL_CTRL_SET; + +/* + * Clock Generator SPLL0 initialization values + * PLL0 configuration table for various PB_CLKO freq. + * Uses pre-calculated values for Fs = 30 kHz, D = 0.5% + * Fout depends on required PB_CLKO. Based on Fref = 33 MHz + */ + +static PLL_CTRL_SET pll0_config[8] = { + {0x00000000, 0x00000000}, /* 0: bypass */ + {0x00000000, 0x00000000}, /* 1: reserved */ + {0x00430044, 0x00000043}, /* 2: CG_PB_CLKO = 183 MHz */ + {0x005c0044, 0x00000039}, /* 3: CG_PB_CLKO = 100 MHz */ + {0x005c0044, 0x00000039}, /* 4: CG_PB_CLKO = 133 MHz */ + {0x004a0044, 0x00000040}, /* 5: CG_PB_CLKO = 167 MHz */ + {0x005c0044, 0x00000039}, /* 6: CG_PB_CLKO = 200 MHz */ + {0x004f0044, 0x0000003e} /* 7: CG_PB_CLKO = 233 MHz */ +}; +#endif /* CFG_CLK_SPREAD */ + +/* + * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT + * (based on recommended Tsi108 reference clock 33MHz) + */ +static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 }; + +/* + * get_board_bus_clk () + * + * returns the bus clock in Hz. + */ +unsigned long get_board_bus_clk (void) +{ + ulong i; + + /* Detect PB clock freq. */ + i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); + i = (i >> 16) & 0x07; /* Get PB PLL multiplier */ + + return pb_clk_sel[i] * 1000000; +} + +/* + * board_early_init_f () + * + * board-specific initialization executed from flash + */ + +int board_early_init_f (void) +{ + DECLARE_GLOBAL_DATA_PTR; + ulong i; + + gd->mem_clk = 0; + i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + + CG_PWRUP_STATUS); + i = (i >> 20) & 0x07; /* Get GD PLL multiplier */ + switch (i) { + case 0: /* external clock */ + printf ("Using external clock\n"); + break; + case 1: /* system clock */ + gd->mem_clk = gd->bus_clk; + break; + case 4: /* 133 MHz */ + case 5: /* 166 MHz */ + case 6: /* 200 MHz */ + gd->mem_clk = pb_clk_sel[i] * 1000000; + break; + default: + printf ("Invalid DDR2 clock setting\n"); + return -1; + } + printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000); + printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); + return 0; +} + +/* + * board_early_init_r() - Tsi108 initialization function executed right after + * relocation. Contains code that cannot be executed from flash. + */ + +int board_early_init_r (void) +{ + ulong temp, i; + ulong reg_val; + volatile ulong *reg_ptr; + + reg_ptr = + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900); + + for (i = 0; i < 32; i++) { + *reg_ptr++ = 0x00000201; /* SWAP ENABLED */ + *reg_ptr++ = 0x00; + } + + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); + + /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2, + 0x80000001); + __asm__ __volatile__ ("sync"); + + /* Make sure that OCN_BAR2 decoder is set (to allow following immediate + * read from SDRAM) + */ + + temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2); + __asm__ __volatile__ ("sync"); + + /* + * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the + * processor bus address space. Immediately after reset LUT and address + * translation are disabled for this BAR. Now we have to initialize LUT + * and switch from the BOOT mode to the normal operation mode. + * + * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000 + * and covers 512MB of address space. To allow larger aperture we also + * have to relocate register window of Tsi108 + * + * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT + * mode. + * + * initialize pointer to LUT associated with PB_OCN_BAR1 + */ + reg_ptr = + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800); + + for (i = 0; i < 32; i++) { + *reg_ptr++ = pb2ocn_lut1[i].lower; + *reg_ptr++ = pb2ocn_lut1[i].upper; + } + + __asm__ __volatile__ ("sync"); + + /* Base addresses for CS0, CS1, CS2, CS3 */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, + 0x00000000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR, + 0x00100000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR, + 0x00200000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR, + 0x00300000); + __asm__ __volatile__ ("sync"); + + /* Masks for HLP banks */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); + + /* Set CTRL0 values for banks */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0, + 0x7FFC44C2); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0, + 0x7FFC44C0); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0, + 0x7FFC44C0); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0, + 0x7FFC44C2); + __asm__ __volatile__ ("sync"); + + /* Set banks to latched mode, enabled, and other default settings */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); + + /* + * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode. + * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable) + */ + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1, + 0xE0000011); + __asm__ __volatile__ ("sync"); + + /* Make sure that OCN_BAR2 decoder is set (to allow following + * immediate read from SDRAM) + */ + + temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1); + __asm__ __volatile__ ("sync"); + + /* + * SRI: At this point we have enabled the HLP banks. That means we can + * now read from the NVRAM and initialize the environment variables. + * We will over-ride the env_init called in board_init_f + * This is really a work-around because, the HLP bank 1 + * where NVRAM resides is not visible during board_init_f + * (lib_ppc/board.c) + * Alternatively, we could use the I2C EEPROM at start-up to configure + * and enable all HLP banks and not just HLP 0 as is being done for + * Taiga Rev. 2. + */ + + env_init (); + +#ifndef DISABLE_PBM + + /* + * For IBM processors we have to set Address-Only commands generated + * by PBM that are different from ones set after reset. + */ + + temp = get_cpu_type (); + + if ((CPU_750FX == temp) || (CPU_750GX == temp)) + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD, + 0x00009955); +#endif /* DISABLE_PBM */ + +#ifdef CONFIG_PCI + /* + * Initialize PCI/X block + */ + + /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */ + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + PCI_PFAB_BAR0_UPPER, 0); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0, + 0xFB000001); + __asm__ __volatile__ ("sync"); + + /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */ + + temp = in32(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT); + + temp &= ~0xFF00; /* Clear the BUS_NUM field */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT, + temp); + + /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER, + 0); + __asm__ __volatile__ ("sync"); + + /* This register is on the PCI side to interpret the address it receives + * and maps it as a IO address. + */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO, + 0xFA000001); + __asm__ __volatile__ ("sync"); + + /* + * Map PCI/X Memory Space + * + * Transactions directed from OCM to PCI Memory Space are directed + * from PB to PCI + * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings). + * If address remapping is required the corresponding PCI_PFAB_MEM32 + * and PCI_PFAB_PFMx register groups have to be configured. + * + * Map the path from the PCI/X bus into the system memory + * + * The memory mapped window assotiated with PCI P2O_BAR2 provides + * access to the system memory without address remapping. + * All system memory is opened for accesses initiated by PCI/X bus + * masters. + * + * Initialize LUT associated with PCI P2O_BAR2 + * + * set pointer to LUT associated with PCI P2O_BAR2 + */ + + reg_ptr = + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500); + +#ifdef DISABLE_PBM + + /* In case when PBM is disabled (no HW supported cache snoopng on PB) + * P2O_BAR2 is directly mapped into the system memory without address + * translation. + */ + + reg_val = 0x00000004; /* SDRAM port + NO Addr_Translation */ + + for (i = 0; i < 32; i++) { + *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */ + *reg_ptr++ = 0; /* P2O_BAR2_LUT_UPPERx */ + } + + /* value for PCI BAR2 (size = 512MB, Enabled, No Addr. Translation) */ + reg_val = 0x00007500; +#else + + reg_val = 0x00000002; /* Destination port = PBM */ + + for (i = 0; i < 32; i++) { + *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */ +/* P2O_BAR2_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */ + *reg_ptr++ = 0x40000000; +/* offset = 16MB, address translation is enabled to allow byte swapping */ + reg_val += 0x01000000; + } + +/* value for PCI BAR2 (size = 512MB, Enabled, Address Translation Enabled) */ + reg_val = 0x00007100; +#endif + + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + reg_val); + __asm__ __volatile__ ("sync"); + + /* Set 64-bit PCI bus address for system memory + * ( 0 is the best choice for easy mapping) + */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER, + 0x00000000); + __asm__ __volatile__ ("sync"); + +#ifndef DISABLE_PBM + /* + * The memory mapped window assotiated with PCI P2O_BAR3 provides + * access to the system memory using SDRAM OCN port and address + * translation. This is alternative way to access SDRAM from PCI + * required for Tsi108 emulation testing. + * All system memory is opened for accesses initiated by + * PCI/X bus masters. + * + * Initialize LUT associated with PCI P2O_BAR3 + * + * set pointer to LUT associated with PCI P2O_BAR3 + */ + reg_ptr = + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600); + + reg_val = 0x00000004; /* Destination port = SDC */ + + for (i = 0; i < 32; i++) { + *reg_ptr++ = reg_val; /* P2O_BAR3_LUTx */ + +/* P2O_BAR3_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */ + *reg_ptr++ = 0; + +/* offset = 16MB, address translation is enabled to allow byte swapping */ + reg_val += 0x01000000; + } + + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); + + /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */ + + reg_val = + in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + PCI_P2O_PAGE_SIZES); + reg_val &= ~0x00FF; + reg_val |= 0x0071; + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + reg_val); + __asm__ __volatile__ ("sync"); + + /* Set 64-bit base PCI bus address for window (0x20000000) */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3, + 0x20000000); + __asm__ __volatile__ ("sync"); + +#endif /* !DISABLE_PBM */ + +#ifdef ENABLE_PCI_CSR_BAR + /* open if required access to Tsi108 CSRs from the PCI/X bus */ + /* enable BAR0 on the PCI/X bus */ + reg_val = in32(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR); + reg_val |= 0x02; + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR, + reg_val); + __asm__ __volatile__ ("sync"); + + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0, + CFG_TSI108_CSR_BASE); + __asm__ __volatile__ ("sync"); + +#endif + + /* + * Finally enable PCI/X Bus Master and Memory Space access + */ + + reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR); + reg_val |= 0x06; + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val); + __asm__ __volatile__ ("sync"); + +#endif /* CONFIG_PCI */ + + /* + * Initialize MPIC outputs (interrupt pins): + * Interrupt routing on the Grendel Emul. Board: + * PB_INT[0] -> INT (CPU0) + * PB_INT[1] -> INT (CPU1) + * PB_INT[2] -> MCP (CPU0) + * PB_INT[3] -> MCP (CPU1) + * Set interrupt controller outputs as Level_Sensitive/Active_Low + */ + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02); + __asm__ __volatile__ ("sync"); + + /* + * Ensure that Machine Check exception is enabled + * We need it to support PCI Bus probing (configuration reads) + */ + + reg_val = mfmsr (); + mtmsr(reg_val | MSR_ME); + + return 0; +} + +/* + * Needed to print out L2 cache info + * used in the misc_init_r function + */ + +unsigned long get_l2cr (void) +{ + unsigned long l2controlreg; + asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):); + return l2controlreg; +} + +/* + * misc_init_r() + * + * various things to do after relocation + * + */ + +int misc_init_r (void) +{ + DECLARE_GLOBAL_DATA_PTR; +#ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */ + ulong i; + + /* Ensure that Spread-Spectrum is disabled */ + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0); + + /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK + * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5% + */ + + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + 0x002e0044); /* D = 0.25% */ + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, + 0x00000039); /* BWADJ */ + + /* Initialize PLL0: CG_PB_CLKO */ + /* Detect PB clock freq. */ + i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); + i = (i >> 16) & 0x07; /* Get PB PLL multiplier */ + + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0); + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1); + + /* Wait and set SSEN for both PLL0 and 1 */ + udelay (1000); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + 0x802e0044); /* D=0.25% */ + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, + 0x80000000 | pll0_config[i].ctrl0); +#endif /* CFG_CLK_SPREAD */ + +#ifdef CFG_L2 + l2cache_enable (); +#endif + printf ("BUS: %d MHz\n", gd->bus_clk / 1000000); + printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); + + /* + * All the information needed to print the cache details is avaiblable + * at this point i.e. above call to l2cache_enable is the very last + * thing done with regards to enabling diabling the cache. + * So this seems like a good place to print all this information + */ + + printf ("CACHE: "); + switch (get_cpu_type()) { + case CPU_7447A: + printf ("L1 Instruction cache - 32KB 8-way"); + (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("L1 Data cache - 32KB 8-way"); + (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("Unified L2 cache - 512KB 8-way"); + (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("\n"); + break; + + case CPU_7448: + printf ("L1 Instruction cache - 32KB 8-way"); + (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("L1 Data cache - 32KB 8-way"); + (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("Unified L2 cache - 1MB 8-way"); + (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + break; + default: + break; + } + return 0; +} diff --git a/board/mpc7448hpc2/u-boot.lds b/board/mpc7448hpc2/u-boot.lds new file mode 100644 index 000000000..8f24213fc --- /dev/null +++ b/board/mpc7448hpc2/u-boot.lds @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2001 + * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * u-boot.lds - linker script for U-Boot on mpc7448hpc2 Board. + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/74xx_7xx/start.o (.text) + +/* store the environment in a seperate sector in the boot flash */ +/* . = env_offset; */ +/* common/environment.o(.text) */ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk index 9ace8860c..5801a5f17 100644 --- a/board/mpc8360emds/config.mk +++ b/board/mpc8360emds/config.mk @@ -26,3 +26,8 @@ # TEXT_BASE = 0xFE000000 + +# +# Additional board-specific libraries +# +BOARDLIBS = libfdt/libfdt.a diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 535884cb5..deadb5ffb 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -31,6 +31,10 @@ #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> #endif +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#include <libfdt_env.h> +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* GETH1 */ @@ -658,22 +662,36 @@ U_BOOT_CMD(ecc, 4, 0, do_ecc, " - disables injects\n" " - re-inits memory"); #endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \ + && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_LIBFDT) + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_path_offset (fdt, "/memory"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(bd->bi_memstart); + tmp[1] = cpu_to_be32(bd->bi_memsize); + err = fdt_setprop(fdt, nodeoffset, "reg", tmp, sizeof(tmp)); + } +#else u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); } #endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 67cd70981..158effe0a 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -21,6 +21,10 @@ #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> #endif +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#include <libfdt_env.h> +#endif #include <asm/fsl_i2c.h> @@ -299,6 +303,22 @@ void pci_init_board(void) } #endif /* CONFIG_PCISLAVE */ +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_path_offset (fdt, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(fdt, nodeoffset, "bus-range", tmp, sizeof(tmp)); + } +} +#endif /* CONFIG_OF_LIBFDT */ #ifdef CONFIG_OF_FLAT_TREE void ft_pci_setup(void *blob, bd_t *bd) diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c index 7a6b3be72..f72651396 100644 --- a/board/uc101/uc101.c +++ b/board/uc101/uc101.c @@ -221,6 +221,8 @@ long int initdram (int board_type) int checkboard (void) { puts ("Board: MAN UC101\n"); + /* clear the Display */ + *(char *)(CFG_DISP_CWORD) = 0x80; return 0; } diff --git a/board/xilinx/ml401/Makefile b/board/xilinx/ml401/Makefile new file mode 100644 index 000000000..9ab563362 --- /dev/null +++ b/board/xilinx/ml401/Makefile @@ -0,0 +1,65 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +$(shell mkdir -p $(obj)../xilinx_enet) +endif + +INCS := -I../common -I../xilinx_enet +CFLAGS += $(INCS) +HOST_CFLAGS += $(INCS) + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o \ + ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \ + ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \ + ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \ + ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \ + ../common/xbasic_types.o ../common/xdma_channel.o \ + ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \ + ../common/xversion.o \ + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xilinx/ml401/config.mk b/board/xilinx/ml401/config.mk new file mode 100644 index 000000000..807f169fa --- /dev/null +++ b/board/xilinx/ml401/config.mk @@ -0,0 +1,32 @@ +# +# (C) Copyright 2007 Michal Simek +# +# Michal SIMEK <monstr@monstr.eu> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# CAUTION: This file is automatically generated by libgen. +# Version: Xilinx EDK 6.3 EDK_Gmm.12.3 +# + +TEXT_BASE = 0x12000000 + +PLATFORM_CPPFLAGS += -mno-xl-soft-mul +PLATFORM_CPPFLAGS += -mno-xl-soft-div +PLATFORM_CPPFLAGS += -mxl-barrel-shift diff --git a/board/xilinx/ml401/ml401.c b/board/xilinx/ml401/ml401.c new file mode 100644 index 000000000..b48103fdc --- /dev/null +++ b/board/xilinx/ml401/ml401.c @@ -0,0 +1,49 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This is a board specific file. It's OK to include board specific + * header files */ + +#include <common.h> +#include <config.h> + +void do_reset (void) +{ +#ifdef CFG_GPIO_0 + *((unsigned long *)(CFG_GPIO_0_ADDR)) = + ++(*((unsigned long *)(CFG_GPIO_0_ADDR))); +#endif +#ifdef CFG_RESET_ADDRESS + puts ("Reseting board\n"); + asm ("bra r0"); +#endif +} + +int gpio_init (void) +{ +#ifdef CFG_GPIO_0 + *((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0; +#endif + return 0; +} diff --git a/include/asm-microblaze/suzaku.h b/board/xilinx/ml401/u-boot.lds index c57a144d3..cb90854a3 100644 --- a/include/asm-microblaze/suzaku.h +++ b/board/xilinx/ml401/u-boot.lds @@ -22,6 +22,46 @@ * MA 02111-1307 USA */ -/* System Register (GPIO) */ -#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 -#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) +OUTPUT_ARCH(microblaze) +ENTRY(_start) + +SECTIONS +{ + .text ALIGN(0x4): + { + __text_start = .; + cpu/microblaze/start.o (.text) + *(.text) + __text_end = .; + } + + .rodata ALIGN(0x4): + { + __rodata_start = .; + *(.rodata) + __rodata_end = .; + } + + .data ALIGN(0x4): + { + __data_start = .; + *(.data) + __data_end = .; + } + + .u_boot_cmd ALIGN(0x4): + { + . = .; + __u_boot_cmd_start = .; + *(.u_boot_cmd) + __u_boot_cmd_end = .; + } + + .bss ALIGN(0x4): + { + __bss_start = .; + *(.bss) + __bss_end = .; + } + __end = . ; +} diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/ml401/xparameters.h new file mode 100644 index 000000000..18d24f9c1 --- /dev/null +++ b/board/xilinx/ml401/xparameters.h @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 6.3 EDK_Gmm.12.3 + */ + +/* System Clock Frequency */ +#define XILINX_CLOCK_FREQ 66666667 + +/* Interrupt controller is intc_0 */ +#define XILINX_INTC_BASEADDR 0xd1000fc0 +#define XILINX_INTC_NUM_INTR_INPUTS 12 + +/* Timer pheriphery is opb_timer_0 */ +#define XILINX_TIMER_BASEADDR 0xa2000000 +#define XILINX_TIMER_IRQ 0 + +/* Uart pheriphery is console_uart */ +#define XILINX_UART_BASEADDR 0xa0000000 +#define XILINX_UART_BAUDRATE 115200 + +/* GPIO is opb_gpio_0*/ +#define XILINX_GPIO_BASEADDR 0x90000000 + +/* Flash Memory is opb_emc_0 */ +#define XILINX_FLASH_START 0x28000000 +#define XILINX_FLASH_SIZE 0x00800000 + +/* Main Memory is plb_ddr_0 */ +#define XILINX_RAM_START 0x10000000 +#define XILINX_RAM_SIZE 0x10000000 + +/* Sysace Controller is opb_sysace_0 */ +#define XILINX_SYSACE_BASEADDR 0xCF000000 +#define XILINX_SYSACE_HIGHADDR 0xCF0001FF +#define XILINX_SYSACE_MEM_WIDTH 16 + +/* Ethernet controller is opb_ethernet_0 */ +#define XPAR_XEMAC_NUM_INSTANCES 1 +#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 +#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000 +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF +#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 +#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 +#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c index f159cb6e3..d3403038e 100644 --- a/board/xilinx/xilinx_enet/emac_adapter.c +++ b/board/xilinx/xilinx_enet/emac_adapter.c @@ -147,7 +147,11 @@ eth_rx(void) RecvFrameLength = PKTSIZE; Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength); if (Result == XST_SUCCESS) { +#ifndef CONFIG_EMACLITE NetReceive((uchar *)etherrxbuff, RecvFrameLength); +#else + NetReceive(etherrxbuff, RecvFrameLength); +#endif return (1); } else { return (0); diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile new file mode 100644 index 000000000..9ab563362 --- /dev/null +++ b/board/xilinx/xupv2p/Makefile @@ -0,0 +1,65 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +$(shell mkdir -p $(obj)../xilinx_enet) +endif + +INCS := -I../common -I../xilinx_enet +CFLAGS += $(INCS) +HOST_CFLAGS += $(INCS) + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o \ + ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \ + ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \ + ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \ + ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \ + ../common/xbasic_types.o ../common/xdma_channel.o \ + ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \ + ../common/xversion.o \ + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk new file mode 100644 index 000000000..c07b0b35b --- /dev/null +++ b/board/xilinx/xupv2p/config.mk @@ -0,0 +1,32 @@ +# +# (C) Copyright 2007 Michal Simek +# +# Michal SIMEK <monstr@monstr.eu> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# CAUTION: This file is automatically generated by libgen. +# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 +# + +TEXT_BASE = 0x38000000 + +PLATFORM_CPPFLAGS += -mno-xl-soft-mul +PLATFORM_CPPFLAGS += -mno-xl-soft-div +PLATFORM_CPPFLAGS += -mxl-barrel-shift diff --git a/board/xilinx/xupv2p/u-boot.lds b/board/xilinx/xupv2p/u-boot.lds new file mode 100644 index 000000000..cb90854a3 --- /dev/null +++ b/board/xilinx/xupv2p/u-boot.lds @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2004 Atmark Techno, Inc. + * + * Yasushi SHOJI <yashi@atmark-techno.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(microblaze) +ENTRY(_start) + +SECTIONS +{ + .text ALIGN(0x4): + { + __text_start = .; + cpu/microblaze/start.o (.text) + *(.text) + __text_end = .; + } + + .rodata ALIGN(0x4): + { + __rodata_start = .; + *(.rodata) + __rodata_end = .; + } + + .data ALIGN(0x4): + { + __data_start = .; + *(.data) + __data_end = .; + } + + .u_boot_cmd ALIGN(0x4): + { + . = .; + __u_boot_cmd_start = .; + *(.u_boot_cmd) + __u_boot_cmd_end = .; + } + + .bss ALIGN(0x4): + { + __bss_start = .; + *(.bss) + __bss_end = .; + } + __end = . ; +} diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h new file mode 100644 index 000000000..a96c693c5 --- /dev/null +++ b/board/xilinx/xupv2p/xparameters.h @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 + */ + +/* System Clock Frequency */ +#define XILINX_CLOCK_FREQ 100000000 + +/* Interrupt controller is opb_intc_0 */ +#define XILINX_INTC_BASEADDR 0x41200000 +#define XILINX_INTC_NUM_INTR_INPUTS 11 + +/* Timer pheriphery is opb_timer_1 */ +#define XILINX_TIMER_BASEADDR 0x41c00000 +#define XILINX_TIMER_IRQ 1 + +/* Uart pheriphery is RS232_Uart_1 */ +#define XILINX_UART_BASEADDR 0x40600000 +#define XILINX_UART_BAUDRATE 115200 + +/* GPIO is LEDs_4Bit*/ +#define XILINX_GPIO_BASEADDR 0x40000000 + +/* FLASH doesn't exist none */ + +/* Main Memory is DDR_256MB_32MX64_rank1_row13_col10_cl2_5 */ +#define XILINX_RAM_START 0x30000000 +#define XILINX_RAM_SIZE 0x10000000 + +/* Sysace Controller is SysACE_CompactFlash */ +#define XILINX_SYSACE_BASEADDR 0x41800000 +#define XILINX_SYSACE_HIGHADDR 0x4180ffff +#define XILINX_SYSACE_MEM_WIDTH 16 + +/* Ethernet controller is Ethernet_MAC */ +#define XPAR_XEMAC_NUM_INSTANCES 1 +#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 +#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000 +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff +#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 +#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 +#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 diff --git a/board/xilinx/xupv2p/xupv2p.c b/board/xilinx/xupv2p/xupv2p.c new file mode 100644 index 000000000..b48103fdc --- /dev/null +++ b/board/xilinx/xupv2p/xupv2p.c @@ -0,0 +1,49 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This is a board specific file. It's OK to include board specific + * header files */ + +#include <common.h> +#include <config.h> + +void do_reset (void) +{ +#ifdef CFG_GPIO_0 + *((unsigned long *)(CFG_GPIO_0_ADDR)) = + ++(*((unsigned long *)(CFG_GPIO_0_ADDR))); +#endif +#ifdef CFG_RESET_ADDRESS + puts ("Reseting board\n"); + asm ("bra r0"); +#endif +} + +int gpio_init (void) +{ +#ifdef CFG_GPIO_0 + *((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0; +#endif + return 0; +} diff --git a/common/Makefile b/common/Makefile index 6f81c4abc..74a6af204 100644 --- a/common/Makefile +++ b/common/Makefile @@ -32,7 +32,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \ cmd_cache.o cmd_console.o \ cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \ cmd_eeprom.o cmd_elf.o cmd_ext2.o \ - cmd_fat.o cmd_fdc.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ + cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \ cmd_load.o cmd_log.o \ cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \ diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 70de795de..d97c09e88 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -180,6 +180,32 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } +#elif defined(CONFIG_MICROBLAZE) /* ! PPC, which leaves Microblaze */ + +int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + bd_t *bd = gd->bd; + print_num ("mem start ", (ulong)bd->bi_memstart); + print_num ("mem size ", (ulong)bd->bi_memsize); + print_num ("flash start ", (ulong)bd->bi_flashstart); + print_num ("flash size ", (ulong)bd->bi_flashsize); + print_num ("flash offset ", (ulong)bd->bi_flashoffset); +#if defined(CFG_SRAM_BASE) + print_num ("sram start ", (ulong)bd->bi_sramstart); + print_num ("sram size ", (ulong)bd->bi_sramsize); +#endif +#if defined(CFG_CMD_NET) + puts ("ethaddr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); + } + puts ("\nip_addr = "); + print_IPaddr (bd->bi_ip_addr); +#endif + printf ("\nbaudrate = %d bps\n", (ulong)bd->bi_baudrate); + return 0; +} #else /* ! PPC, which leaves MIPS */ diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index c0ed076bb..2721216bf 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -34,7 +34,11 @@ #include <environment.h> #include <asm/byteorder.h> -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) +#include <fdt.h> +#include <libfdt.h> +#endif +#if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> #endif @@ -467,7 +471,7 @@ U_BOOT_CMD( "[addr [arg ...]]\n - boot application image stored in memory\n" "\tpassing arguments 'arg ...'; when booting a Linux kernel,\n" "\t'arg' can be the address of an initrd image\n" -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) "\tWhen booting a Linux kernel which requires a flat device-tree\n" "\ta third argument is required which is the address of the of the\n" "\tdevice-tree blob. To boot that kernel without an initrd image,\n" @@ -529,7 +533,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, bd_t *kbd; void (*kernel)(bd_t *, ulong, ulong, ulong, ulong); image_header_t *hdr = &header; -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) char *of_flat_tree = NULL; ulong of_data = 0; #endif @@ -622,7 +626,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * Check if there is an initrd image */ -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) /* Look for a '-' which indicates to ignore the ramdisk argument */ if (argc >= 3 && strcmp(argv[2], "-") == 0) { debug ("Skipping initrd\n"); @@ -739,12 +743,15 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, len = data = 0; } -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) if(argc > 3) { of_flat_tree = (char *) simple_strtoul(argv[3], NULL, 16); hdr = (image_header_t *)of_flat_tree; - - if (*(ulong *)of_flat_tree == OF_DT_HEADER) { +#if defined(CONFIG_OF_LIBFDT) + if (be32_to_cpu(fdt_magic(of_flat_tree)) == FDT_MAGIC) { +#else + if (*(ulong *)of_flat_tree == OF_DT_HEADER) { +#endif #ifndef CFG_NO_FLASH if (addr2info((ulong)of_flat_tree) != NULL) of_data = (ulong)of_flat_tree; @@ -787,7 +794,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, printf("ERROR: uImage is not uncompressed\n"); return; } +#if defined(CONFIG_OF_LIBFDT) + if (be32_to_cpu(fdt_magic(of_flat_tree + sizeof(image_header_t))) != FDT_MAGIC) { +#else if (*((ulong *)(of_flat_tree + sizeof(image_header_t))) != OF_DT_HEADER) { +#endif printf ("ERROR: uImage data is not a flat device tree\n"); return; } @@ -824,12 +835,20 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, of_data += 4 - tail; } +#if defined(CONFIG_OF_LIBFDT) + if (be32_to_cpu(fdt_magic(of_data)) != FDT_MAGIC) { +#else if (((struct boot_param_header *)of_data)->magic != OF_DT_HEADER) { +#endif printf ("ERROR: image is not a flat device tree\n"); return; } +#if defined(CONFIG_OF_LIBFDT) + if (be32_to_cpu(fdt_totalsize(of_data)) != ntohl(len_ptr[2])) { +#else if (((struct boot_param_header *)of_data)->totalsize != ntohl(len_ptr[2])) { +#endif printf ("ERROR: flat device tree size does not agree with image\n"); return; } @@ -913,7 +932,31 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, unlock_ram_in_cache(); #endif -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) + /* move of_flat_tree if needed */ + if (of_data) { + int err; + ulong of_start, of_len; + of_len = be32_to_cpu(fdt_totalsize(of_data)); + /* provide extra 8k pad */ + if (initrd_start) + of_start = initrd_start - of_len - 8192; + else + of_start = (ulong)kbd - of_len - 8192; + of_start &= ~(4096 - 1); /* align on page */ + debug ("## device tree at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n", + of_data, of_data + of_len - 1, of_len, of_len); + + + printf (" Loading Device Tree to %08lx, end %08lx ... ", + of_start, of_start + of_len - 1); + err = fdt_open_into(of_start, of_data, of_len); + if (err != 0) { + printf ("libfdt: %s\n", fdt_strerror(err)); + } + } +#endif +#if defined(CONFIG_OF_FLAT_TREE) /* move of_flat_tree if needed */ if (of_data) { ulong of_start, of_len; @@ -942,13 +985,13 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * r6: Start of command line string * r7: End of command line string */ -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) if (!of_flat_tree) /* no device tree; boot old style */ #endif (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); /* does not return */ -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) /* * Linux Kernel Parameters (passing device tree): * r3: ptr to OF flat tree, followed by the board info data @@ -957,8 +1000,10 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * r6: NULL * r7: NULL */ +#if defined(CONFIG_OF_FLAT_TREE) ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); /* ft_dump_blob(of_flat_tree); */ +#endif (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); #endif diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c new file mode 100644 index 000000000..968bade62 --- /dev/null +++ b/common/cmd_fdt.c @@ -0,0 +1,874 @@ +/* + * (C) Copyright 2007 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com + * Based on code written by: + * Pantelis Antoniou <pantelis.antoniou@gmail.com> and + * Matthew McClintock <msm@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <linux/ctype.h> +#include <linux/types.h> + +#ifdef CONFIG_OF_LIBFDT +#include <asm/global_data.h> +#include <fdt.h> +#include <libfdt.h> + +#define MAX_LEVEL 32 /* how deeply nested we will go */ +#define SCRATCHPAD 1024 /* bytes of scratchpad memory */ + +/* + * Global data (for the gd->bd) + */ +DECLARE_GLOBAL_DATA_PTR; + +/* + * Scratchpad memory. + */ +static char data[SCRATCHPAD]; + + +/* + * Function prototypes/declarations. + */ +static int fdt_valid(void); +static void print_data(const void *data, int len); +static int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end); +static int fdt_env(void *fdt); +static int fdt_bd_t(void *fdt); + + +/* + * Flattened Device Tree command, see the help for parameter definitions. + */ +int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + char op; + + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + /* + * Figure out which subcommand was given + */ + op = argv[1][0]; + /******************************************************************** + * Set the address of the fdt + ********************************************************************/ + if (op == 'a') { + /* + * Set the address [and length] of the fdt. + */ + fdt = (struct fdt_header *)simple_strtoul(argv[2], NULL, 16); + + if (!fdt_valid()) { + return 1; + } + + if (argc >= 4) { + int len; + int err; + /* + * Optional new length + */ + len = simple_strtoul(argv[3], NULL, 16); + if (len < fdt_totalsize(fdt)) { + printf ("New length %d < existing length %d, ignoring.\n", + len, fdt_totalsize(fdt)); + } else { + /* + * Open in place with a new length. + */ + err = fdt_open_into(fdt, fdt, len); + if (err != 0) { + printf ("libfdt: %s\n", fdt_strerror(err)); + } + } + } + + /******************************************************************** + * Move the fdt + ********************************************************************/ + } else if (op == 'm') { + struct fdt_header *newaddr; + int len; + int err; + + if (argc != 5) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + /* + * Set the address and length of the fdt. + */ + fdt = (struct fdt_header *)simple_strtoul(argv[2], NULL, 16); + if (!fdt_valid()) { + return 1; + } + + newaddr = (struct fdt_header *)simple_strtoul(argv[3], NULL, 16); + len = simple_strtoul(argv[4], NULL, 16); + if (len < fdt_totalsize(fdt)) { + printf ("New length %d < existing length %d, aborting.\n", + len, fdt_totalsize(fdt)); + return 1; + } + + /* + * Copy to the new location. + */ + err = fdt_open_into(fdt, newaddr, len); + if (err != 0) { + printf ("libfdt: %s\n", fdt_strerror(err)); + return 1; + } + fdt = newaddr; + + /******************************************************************** + * Set the value of a node in the fdt. + ********************************************************************/ + } else if (op == 's') { + char *pathp; /* path */ + char *prop; /* property */ + struct fdt_property *nodep; /* node struct pointer */ + char *newval; /* value from the user (as a string) */ + char *vp; /* temporary value pointer */ + char *cp; /* temporary char pointer */ + int nodeoffset; /* node offset from libfdt */ + int len; /* new length of the property */ + int oldlen; /* original length of the property */ + unsigned long tmp; /* holds converted values */ + int ret; /* return value */ + + /* + * Parameters: Node path, property, value. + */ + if (argc < 5) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + pathp = argv[2]; + prop = argv[3]; + newval = argv[4]; + + if (strcmp(pathp, "/") == 0) { + nodeoffset = 0; + } else { + nodeoffset = fdt_path_offset (fdt, pathp); + if (nodeoffset < 0) { + /* + * Not found or something else bad happened. + */ + printf ("libfdt: %s\n", fdt_strerror(nodeoffset)); + return 1; + } + } + nodep = fdt_getprop (fdt, nodeoffset, prop, &oldlen); + if (oldlen < 0) { + printf ("libfdt %s\n", fdt_strerror(oldlen)); + return 1; + } else if (oldlen == 0) { + /* + * The specified property has no value + */ + printf("%s has no value, cannot set one (yet).\n", prop); + return 1; + } else { + /* + * Convert the new property + */ + vp = data; + if (*newval == '<') { + /* + * Bigger values than bytes. + */ + len = 0; + newval++; + while ((*newval != '>') && (*newval != '\0')) { + cp = newval; + tmp = simple_strtoul(cp, &newval, 16); + if ((newval - cp) <= 2) { + *vp = tmp & 0xFF; + vp += 1; + len += 1; + } else if ((newval - cp) <= 4) { + *(uint16_t *)vp = __cpu_to_be16(tmp); + vp += 2; + len += 2; + } else if ((newval - cp) <= 8) { + *(uint32_t *)vp = __cpu_to_be32(tmp); + vp += 4; + len += 4; + } else { + printf("Sorry, I could not convert \"%s\"\n", cp); + return 1; + } + while (*newval == ' ') + newval++; + } + if (*newval != '>') { + printf("Unexpected character '%c'\n", *newval); + return 1; + } + } else if (*newval == '[') { + /* + * Byte stream. Convert the values. + */ + len = 0; + newval++; + while ((*newval != ']') && (*newval != '\0')) { + tmp = simple_strtoul(newval, &newval, 16); + *vp++ = tmp & 0xFF; + len++; + while (*newval == ' ') + newval++; + } + if (*newval != ']') { + printf("Unexpected character '%c'\n", *newval); + return 1; + } + } else { + /* + * Assume it is a string. Copy it into our data area for + * convenience (including the terminating '\0'). + */ + len = strlen(newval) + 1; + strcpy(data, newval); + } + + ret = fdt_setprop(fdt, nodeoffset, prop, data, len); + if (ret < 0) { + printf ("libfdt %s\n", fdt_strerror(ret)); + return 1; + } + } + + /******************************************************************** + * Print (recursive) / List (single level) + ********************************************************************/ + } else if ((op == 'p') || (op == 'l')) { + /* + * Recursively print (a portion of) the fdt. + */ + static int offstack[MAX_LEVEL]; + static char tabs[MAX_LEVEL+1] = "\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t"; + int depth = MAX_LEVEL; /* how deep to print */ + char *pathp; /* path */ + char *prop; /* property */ + void *nodep; /* property node pointer */ + int nodeoffset; /* node offset from libfdt */ + int nextoffset; /* next node offset from libfdt */ + uint32_t tag; /* tag */ + int len; /* length of the property */ + int level = 0; /* keep track of nesting level */ + + /* + * list is an alias for print, but limited to 1 level + */ + if (op == 'l') { + depth = 1; + } + + /* + * Get the starting path. The root node is an oddball, + * the offset is zero and has no name. + */ + pathp = argv[2]; + if (argc > 3) + prop = argv[3]; + else + prop = NULL; + + if (strcmp(pathp, "/") == 0) { + nodeoffset = 0; + printf("/"); + } else { + nodeoffset = fdt_path_offset (fdt, pathp); + if (nodeoffset < 0) { + /* + * Not found or something else bad happened. + */ + printf ("libfdt %s\n", fdt_strerror(nodeoffset)); + return 1; + } + } + /* + * The user passed in a property as well as node path. Print only + * the given property and then return. + */ + if (prop) { + nodep = fdt_getprop (fdt, nodeoffset, prop, &len); + if (len == 0) { + printf("%s %s\n", pathp, prop); /* no property value */ + return 0; + } else if (len > 0) { + printf("%s=", prop); + print_data (nodep, len); + printf("\n"); + return 0; + } else { + printf ("libfdt %s\n", fdt_strerror(len)); + return 1; + } + } + + /* + * The user passed in a node path and no property, print the node + * and all subnodes. + */ + offstack[0] = nodeoffset; + + while(level >= 0) { + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, &pathp); + switch(tag) { + case FDT_BEGIN_NODE: + if(level <= depth) + printf("%s%s {\n", &tabs[MAX_LEVEL - level], pathp); + level++; + offstack[level] = nodeoffset; + if (level >= MAX_LEVEL) { + printf("Aaaiii <splat> nested too deep.\n"); + return 1; + } + break; + case FDT_END_NODE: + level--; + if(level <= depth) + printf("%s};\n", &tabs[MAX_LEVEL - level]); + if (level == 0) { + level = -1; /* exit the loop */ + } + break; + case FDT_PROP: + nodep = fdt_getprop (fdt, offstack[level], pathp, &len); + if (len < 0) { + printf ("libfdt %s\n", fdt_strerror(len)); + return 1; + } else if (len == 0) { + /* the property has no value */ + if(level <= depth) + printf("%s%s;\n", &tabs[MAX_LEVEL - level], pathp); + } else { + if(level <= depth) { + printf("%s%s=", &tabs[MAX_LEVEL - level], pathp); + print_data (nodep, len); + printf(";\n"); + } + } + break; + case FDT_NOP: + break; + case FDT_END: + return 1; + default: + if(level <= depth) + printf("Unknown tag 0x%08X\n", tag); + return 1; + } + nodeoffset = nextoffset; + } + + /******************************************************************** + * Remove a property/node + ********************************************************************/ + } else if (op == 'r') { + int nodeoffset; /* node offset from libfdt */ + int err; + + /* + * Get the path. The root node is an oddball, the offset + * is zero and has no name. + */ + if (strcmp(argv[2], "/") == 0) { + nodeoffset = 0; + } else { + nodeoffset = fdt_path_offset (fdt, argv[2]); + if (nodeoffset < 0) { + /* + * Not found or something else bad happened. + */ + printf ("libfdt %s\n", fdt_strerror(nodeoffset)); + return 1; + } + } + /* + * Do the delete. A fourth parameter means delete a property, + * otherwise delete the node. + */ + if (argc > 3) { + err = fdt_delprop(fdt, nodeoffset, argv[3]); + if (err < 0) { + printf("fdt_delprop libfdt: %s\n", fdt_strerror(err)); + return err; + } + } else { + err = fdt_del_node(fdt, nodeoffset); + if (err < 0) { + printf("fdt_del_node libfdt: %s\n", fdt_strerror(err)); + return err; + } + } + + /******************************************************************** + * Create a chosen node + ********************************************************************/ + } else if (op == 'c') { + fdt_chosen(fdt, 0, 0); + + /******************************************************************** + * Create a u-boot-env node + ********************************************************************/ + } else if (op == 'e') { + fdt_env(fdt); + + /******************************************************************** + * Create a bd_t node + ********************************************************************/ + } else if (op == 'b') { + fdt_bd_t(fdt); + + /******************************************************************** + * Unrecognized command + ********************************************************************/ + } else { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + return 0; +} + +/********************************************************************/ + +static int fdt_valid(void) +{ + if (fdt == NULL) { + printf ("The address of the fdt is invalid.\n"); + return 0; + } + if (!fdt || (fdt_magic(fdt) != FDT_MAGIC)) { + fdt = NULL; + printf ("Unrecognized fdt: bad magic\n"); + return 0; + } + if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) { + printf ("Unsupported fdt version: $d < %d\n", + FDT_FIRST_SUPPORTED_VERSION, fdt_version(fdt)); + fdt = NULL; + return 0; + } + if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) { + printf ("Unsupported fdt version: $d > %d\n", + fdt_version(fdt), FDT_LAST_SUPPORTED_VERSION); + fdt = NULL; + return 0; + } + return 1; +} + +/********************************************************************/ + +/* + * OF flat tree handling + * Written by: Pantelis Antoniou <pantelis.antoniou@gmail.com> + * Updated by: Matthew McClintock <msm@freescale.com> + * Converted to libfdt by: Gerald Van Baren <vanbaren@cideas.com> + */ + +static int is_printable_string(const void *data, int len) +{ + const char *s = data; + + /* zero length is not */ + if (len == 0) + return 0; + + /* must terminate with zero */ + if (s[len - 1] != '\0') + return 0; + + /* printable or a null byte (concatenated strings) */ + while (((*s == '\0') || isprint(*s)) && (len > 0)) { + /* + * If we see a null, there are three possibilities: + * 1) If len == 1, it is the end of the string, printable + * 2) Next character also a null, not printable. + * 3) Next character not a null, continue to check. + */ + if (s[0] == '\0') { + if (len == 1) + return 1; + if (s[1] == '\0') + return 0; + } + s++; + len--; + } + + /* Not the null termination, or not done yet: not printable */ + if (*s != '\0' || (len != 0)) + return 0; + + return 1; +} + +static void print_data(const void *data, int len) +{ + int j; + const u8 *s; + + /* no data, don't print */ + if (len == 0) + return; + + /* + * It is a string, but it may have multiple strings (embedded '\0's). + */ + if (is_printable_string(data, len)) { + puts("\""); + j = 0; + while (j < len) { + if (j > 0) + puts("\", \""); + puts(data); + j += strlen(data) + 1; + data += strlen(data) + 1; + } + puts("\""); + return; + } + + switch (len) { + case 1: /* byte */ + printf("<%02x>", (*(u8 *) data) & 0xff); + break; + case 2: /* half-word */ + printf("<%04x>", be16_to_cpu(*(u16 *) data) & 0xffff); + break; + case 4: /* word */ + printf("<%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU); + break; + case 8: /* double-word */ +#if __WORDSIZE == 64 + printf("<%016llx>", be64_to_cpu(*(uint64_t *) data)); +#else + printf("<%08x ", be32_to_cpu(*(u32 *) data) & 0xffffffffU); + data += 4; + printf("%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU); +#endif + break; + default: /* anything else... hexdump */ + printf("["); + for (j = 0, s = data; j < len; j++) + printf("%02x%s", s[j], j < len - 1 ? " " : ""); + printf("]"); + + break; + } +} + +/********************************************************************/ + +static int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end) +{ + bd_t *bd = gd->bd; + int nodeoffset; + int err; + u32 tmp; /* used to set 32 bit integer properties */ + char *str; /* used to set string properties */ + ulong clock; + + if (initrd_start && initrd_end) { + err = fdt_add_reservemap_entry(fdt, + initrd_start, initrd_end - initrd_start + 1); + if (err < 0) { + printf("libfdt: %s\n", fdt_strerror(err)); + return err; + } + } + + /* + * See if we already have a "chosen" node, create it if not. + */ + nodeoffset = fdt_path_offset (fdt, "/chosen"); + if (nodeoffset < 0) { + /* + * Create a new node "/chosen" (offset 0 is root level) + */ + nodeoffset = fdt_add_subnode(fdt, 0, "chosen"); + if (nodeoffset < 0) { + printf("libfdt: %s\n", fdt_strerror(nodeoffset)); + return nodeoffset; + } + } + + str = getenv("bootargs"); + if (str != NULL) { + err = fdt_setprop(fdt, nodeoffset, "bootargs", str, strlen(str)+1); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + } + if (initrd_start && initrd_end) { + tmp = __cpu_to_be32(initrd_start); + err = fdt_setprop(fdt, nodeoffset, "linux,initrd-start", &tmp, sizeof(tmp)); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + tmp = __cpu_to_be32(initrd_end); + err = fdt_setprop(fdt, nodeoffset, "linux,initrd-end", &tmp, sizeof(tmp)); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + } +#ifdef OF_STDOUT_PATH + err = fdt_setprop(fdt, nodeoffset, "linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); +#endif + + nodeoffset = fdt_path_offset (fdt, "/cpus"); + if (nodeoffset >= 0) { + clock = cpu_to_be32(bd->bi_intfreq); + err = fdt_setprop(fdt, nodeoffset, "clock-frequency", &clock, 4); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + } +#ifdef OF_TBCLK + nodeoffset = fdt_path_offset (fdt, "/cpus/" OF_CPU "/timebase-frequency"); + if (nodeoffset >= 0) { + clock = cpu_to_be32(OF_TBCLK); + err = fdt_setprop(fdt, nodeoffset, "clock-frequency", &clock, 4); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + } +#endif +} + +/********************************************************************/ + +#ifdef CONFIG_OF_HAS_BD_T + +/* Function that returns a character from the environment */ +extern uchar(*env_get_char) (int); + +#define BDM(x) { .name = #x, .offset = offsetof(bd_t, bi_ ##x ) } + +static const struct { + const char *name; + int offset; +} bd_map[] = { + BDM(memstart), + BDM(memsize), + BDM(flashstart), + BDM(flashsize), + BDM(flashoffset), + BDM(sramstart), + BDM(sramsize), +#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \ + || defined(CONFIG_E500) + BDM(immr_base), +#endif +#if defined(CONFIG_MPC5xxx) + BDM(mbar_base), +#endif +#if defined(CONFIG_MPC83XX) + BDM(immrbar), +#endif +#if defined(CONFIG_MPC8220) + BDM(mbar_base), + BDM(inpfreq), + BDM(pcifreq), + BDM(pevfreq), + BDM(flbfreq), + BDM(vcofreq), +#endif + BDM(bootflags), + BDM(ip_addr), + BDM(intfreq), + BDM(busfreq), +#ifdef CONFIG_CPM2 + BDM(cpmfreq), + BDM(brgfreq), + BDM(sccfreq), + BDM(vco), +#endif +#if defined(CONFIG_MPC5xxx) + BDM(ipbfreq), + BDM(pcifreq), +#endif + BDM(baudrate), +}; + +static int fdt_env(void *fdt) +{ + int nodeoffset; + int err; + int k, nxt; + int i; + static char tmpenv[256]; + + /* + * See if we already have a "u-boot-env" node, delete it if so. + * Then create a new empty node. + */ + nodeoffset = fdt_path_offset (fdt, "/u-boot-env"); + if (nodeoffset >= 0) { + err = fdt_del_node(fdt, nodeoffset); + if (err < 0) { + printf("libfdt: %s\n", fdt_strerror(err)); + return err; + } + } + /* + * Create a new node "/u-boot-env" (offset 0 is root level) + */ + nodeoffset = fdt_add_subnode(fdt, 0, "u-boot-env"); + if (nodeoffset < 0) { + printf("libfdt: %s\n", fdt_strerror(nodeoffset)); + return nodeoffset; + } + + for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) { + char *s, *lval, *rval; + + /* + * Find the end of the name=definition + */ + for (nxt = i; env_get_char(nxt) != '\0'; ++nxt) + ; + s = tmpenv; + for (k = i; k < nxt && s < &tmpenv[sizeof(tmpenv) - 1]; ++k) + *s++ = env_get_char(k); + *s++ = '\0'; + lval = tmpenv; + /* + * Find the first '=': it separates the name from the value + */ + s = strchr(tmpenv, '='); + if (s != NULL) { + *s++ = '\0'; + rval = s; + } else + continue; + err = fdt_setprop(fdt, nodeoffset, lval, rval, strlen(rval)+1); + if (err < 0) { + printf("\"%s\" - libfdt: %s\n", lval, fdt_strerror(err)); + return err; + } + } + return 0; +} +#endif /* CONFIG_OF_HAS_UBOOT_ENV */ + +/********************************************************************/ + +#ifdef CONFIG_OF_HAS_BD_T +static int fdt_bd_t(void *fdt) +{ + bd_t *bd = gd->bd; + int nodeoffset; + int err; + u32 tmp; /* used to set 32 bit integer properties */ + int i; + + /* + * See if we already have a "bd_t" node, delete it if so. + * Then create a new empty node. + */ + nodeoffset = fdt_path_offset (fdt, "/bd_t"); + if (nodeoffset >= 0) { + err = fdt_del_node(fdt, nodeoffset); + if (err < 0) { + printf("libfdt: %s\n", fdt_strerror(err)); + return err; + } + } + /* + * Create a new node "/bd_t" (offset 0 is root level) + */ + nodeoffset = fdt_add_subnode(fdt, 0, "bd_t"); + if (nodeoffset < 0) { + printf("libfdt: %s\n", fdt_strerror(nodeoffset)); + return nodeoffset; + } + /* + * Use the string/pointer structure to create the entries... + */ + for (i = 0; i < sizeof(bd_map)/sizeof(bd_map[0]); i++) { + tmp = cpu_to_be32(getenv("bootargs")); + err = fdt_setprop(fdt, nodeoffset, bd_map[i].name, &tmp, sizeof(tmp)); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + } + /* + * Add a couple of oddball entries... + */ + err = fdt_setprop(fdt, nodeoffset, "enetaddr", &bd->bi_enetaddr, 6); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + err = fdt_setprop(fdt, nodeoffset, "ethspeed", &bd->bi_ethspeed, 4); + if (err < 0) + printf("libfdt: %s\n", fdt_strerror(err)); + +#ifdef CONFIG_OF_BOARD_SETUP + ft_board_setup(fdt, bd); +#endif + + return 0; +} +#endif /* CONFIG_OF_HAS_BD_T */ + +/********************************************************************/ + +U_BOOT_CMD( + fdt, 5, 0, do_fdt, + "fdt - flattened device tree utility commands\n", + "addr <addr> [<length>] - Set the fdt location to <addr>\n" + "fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr>\n" + "fdt print <path> [<prop>] - Recursive print starting at <path>\n" + "fdt list <path> [<prop>] - Print one level starting at <path>\n" + "fdt set <path> <prop> [<val>] - Set <property> [to <val>]\n" + "fdt mknode <path> <node> - Create a new node after <path>\n" + "fdt rm <path> [<prop>] - Delete the node or <property>\n" + "fdt chosen - Add/update the \"/chosen\" branch in the tree\n" +#ifdef CONFIG_OF_HAS_UBOOT_ENV + "fdt env - Add/replace the \"/u-boot-env\" branch in the tree\n" +#endif +#ifdef CONFIG_OF_HAS_BD_T + "fdt bd_t - Add/replace the \"/bd_t\" branch in the tree\n" +#endif + "Hints:\n" + " * Set a larger length with the fdt addr command to add to the blob.\n" + " * If the property you are setting/printing has a '#' character,\n" + " you MUST escape it with a \\ character or quote it with \" or\n" + " it will be ignored as a comment.\n" + " * If the value has spaces in it, you MUST escape the spaces with\n" + " \\ characters or quote it with \"\"\n" + "Examples: fdt print / # print the whole tree\n" + " fdt print /cpus \"#address-cells\"\n" + " fdt set /cpus \"#address-cells\" \"[00 00 00 01]\"\n" +); + +#endif /* CONFIG_OF_FLAT_TREE */ diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 34571ee73..755810d59 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -969,7 +969,7 @@ U_BOOT_CMD( "i2c sdram chip - print SDRAM configuration information\n" #endif /* CFG_CMD_SDRAM */ ); -#else /* CONFIG_I2C_CMD_TREE */ +#endif /* CONFIG_I2C_CMD_TREE */ U_BOOT_CMD( imd, 4, 1, do_i2c_md, \ "imd - i2c memory display\n", \ @@ -1024,6 +1024,5 @@ U_BOOT_CMD( " (valid chip values 50..57)\n" ); #endif -#endif /* CONFIG_I2C_CMD_TREE */ #endif /* CFG_CMD_I2C */ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 2e185cc44..ce99a41ab 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -423,7 +423,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } part = simple_strtoul(++ep, NULL, 16); } - if (get_partition_info (ide_dev_desc, part, &info)) { + if (get_partition_info (&ide_dev_desc[dev], part, &info)) { SHOW_BOOT_PROGRESS (-1); return 1; } @@ -513,9 +513,11 @@ void ide_init (void) #endif unsigned char c; int i, bus; +#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3) + unsigned int ata_reset_time; +#endif #ifdef CONFIG_AMIGAONEG3SE unsigned int max_bus_scan; - unsigned int ata_reset_time; char *s; #endif #ifdef CONFIG_IDE_8xx_PCCARD @@ -617,10 +619,9 @@ void ide_init (void) udelay (100000); /* 100 ms */ ide_outb (dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev)); udelay (100000); /* 100 ms */ -#ifdef CONFIG_AMIGAONEG3SE - ata_reset_time = ATA_RESET_TIME; - s = getenv("ide_reset_timeout"); - if (s) ata_reset_time = 2*simple_strtol(s, NULL, 10); +#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3) + if ((s = getenv("ide_reset_timeout")) != NULL) + ata_reset_time = simple_strtol(s, NULL, 10); #endif i = 0; do { @@ -628,7 +629,7 @@ void ide_init (void) c = ide_inb (dev, ATA_STATUS); i++; -#ifdef CONFIG_AMIGAONEG3SE +#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3) if (i > (ata_reset_time * 100)) { #else if (i > (ATA_RESET_TIME * 100)) { @@ -1343,7 +1344,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) ++n; ++blknr; - buffer += ATA_SECTORWORDS; + buffer += ATA_BLOCKSIZE; } IDE_READ_E: ide_led (DEVICE_LED(device), 0); /* LED off */ @@ -1427,7 +1428,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer) c = ide_inb (device, ATA_STATUS); /* clear IRQ */ ++n; ++blknr; - buffer += ATA_SECTORWORDS; + buffer += ATA_BLOCKSIZE; } WR_OUT: ide_led (DEVICE_LED(device), 0); /* LED off */ @@ -2051,7 +2052,7 @@ ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) n+=cnt; blkcnt-=cnt; blknr+=cnt; - buffer+=cnt*(ATAPI_READ_BLOCK_SIZE/4); /* ulong blocksize in ulong */ + buffer+=(cnt*ATAPI_READ_BLOCK_SIZE); } while (blkcnt > 0); return (n); } diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index da36ed9e1..00b84fad1 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -248,7 +248,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } part = simple_strtoul(++ep, NULL, 16); } - if (get_partition_info (scsi_dev_desc, part, &info)) { + if (get_partition_info (&scsi_dev_desc[dev], part, &info)) { printf("error reading partinfo\n"); return 1; } diff --git a/common/serial.c b/common/serial.c index 605d4e34b..13e9f30e4 100644 --- a/common/serial.c +++ b/common/serial.c @@ -41,7 +41,7 @@ struct serial_device *default_serial_console (void) || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4) return &serial_scc_device; #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ - || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) + || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx) #if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL) #if (CONFIG_CONS_INDEX==1) return &eserial1_device; @@ -91,7 +91,7 @@ void serial_initialize (void) #endif #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ - || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) + || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx) serial_register(&serial0_device); serial_register(&serial1_device); #endif diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c index f4e5fc504..9c8998b60 100644 --- a/cpu/74xx_7xx/cpu.c +++ b/cpu/74xx_7xx/cpu.c @@ -44,6 +44,10 @@ #include <74xx_7xx.h> #include <asm/cache.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#endif + #ifdef CONFIG_AMIGAONEG3SE #include "../board/MAI/AmigaOneG3SE/via686.h" #include "../board/MAI/AmigaOneG3SE/memio.h" @@ -101,6 +105,10 @@ get_cpu_type(void) type = CPU_7457; break; + case 0x8003: + type = CPU_7447A; + break; + case 0x8004: type = CPU_7448; break; @@ -156,6 +164,10 @@ int checkcpu (void) str = "MPC7410"; break; + case CPU_7447A: + str = "MPC7447A"; + break; + case CPU_7448: str = "MPC7448"; break; @@ -264,20 +276,19 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* * For the 7400 the TB clock runs at 1/4 the cpu bus speed. */ -#ifdef CONFIG_AMIGAONEG3SE +#if defined(CONFIG_AMIGAONEG3SE) || defined(CFG_CONFIG_BUS_CLK) unsigned long get_tbclk(void) { return (gd->bus_clk / 4); } -#else /* ! CONFIG_AMIGAONEG3SE */ +#else /* ! CONFIG_AMIGAONEG3SE and !CFG_CONFIG_BUS_CLK*/ unsigned long get_tbclk (void) { return CFG_BUS_HZ / 4; } -#endif /* CONFIG_AMIGAONEG3SE */ +#endif /* CONFIG_AMIGAONEG3SE or CFG_CONFIG_BUS_CLK*/ /* ------------------------------------------------------------------------- */ - #if defined(CONFIG_WATCHDOG) #if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx) void @@ -289,3 +300,30 @@ watchdog_reset(void) #endif /* CONFIG_WATCHDOG */ /* ------------------------------------------------------------------------- */ + +#ifdef CONFIG_OF_FLAT_TREE +void +ft_cpu_setup (void *blob, bd_t *bd) +{ + u32 *p; + ulong clock; + int len; + + clock = bd->bi_busfreq; + + p = ft_get_prop (blob, "/cpus/" OF_CPU "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32 (clock); + +#if defined(CONFIG_TSI108_ETH) + p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6200/address", &len); + memcpy (p, bd->bi_enetaddr, 6); +#endif + +#if defined(CONFIG_HAS_ETH1) + p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6600/address", &len); + memcpy (p, bd->bi_enet1addr, 6); +#endif +} +#endif +/* ------------------------------------------------------------------------- */ diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c index e02a4cc21..1dd1b2cd8 100644 --- a/cpu/74xx_7xx/cpu_init.c +++ b/cpu/74xx_7xx/cpu_init.c @@ -43,6 +43,7 @@ cpu_init_f (void) case CPU_7450: case CPU_7455: case CPU_7457: + case CPU_7447A: case CPU_7448: /* enable the timebase bit in HID0 */ set_hid0(get_hid0() | 0x4000000); diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c index d1800ede0..d8c40cea0 100644 --- a/cpu/74xx_7xx/speed.c +++ b/cpu/74xx_7xx/speed.c @@ -31,6 +31,8 @@ DECLARE_GLOBAL_DATA_PTR; +extern unsigned long get_board_bus_clk (void); + static const int hid1_multipliers_x_10[] = { 25, /* 0000 - 2.5x */ 75, /* 0001 - 7.5x */ @@ -50,6 +52,42 @@ static const int hid1_multipliers_x_10[] = { 0 /* 1111 - off */ }; +/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */ +static const int hid1_74xx_multipliers_x_10[] = { + 115, /* 00000 - 11.5x */ + 170, /* 00001 - 17x */ + 75, /* 00010 - 7.5x */ + 150, /* 00011 - 15x */ + 70, /* 00100 - 7x */ + 180, /* 00101 - 18x */ + 10, /* 00110 - bypass */ + 200, /* 00111 - 20x */ + 20, /* 01000 - 2x */ + 210, /* 01001 - 21x */ + 65, /* 01010 - 6.5x */ + 130, /* 01011 - 13x */ + 85, /* 01100 - 8.5x */ + 240, /* 01101 - 24x */ + 95, /* 01110 - 9.5x */ + 90, /* 01111 - 9x */ + 30, /* 10000 - 3x */ + 105, /* 10001 - 10.5x */ + 55, /* 10010 - 5.5x */ + 110, /* 10011 - 11x */ + 40, /* 10100 - 4x */ + 100, /* 10101 - 10x */ + 50, /* 10110 - 5x */ + 120, /* 10111 - 12x */ + 80, /* 11000 - 8x */ + 140, /* 11001 - 14x */ + 60, /* 11010 - 6x */ + 160, /* 11011 - 16x */ + 135, /* 11100 - 13.5x */ + 280, /* 11101 - 28x */ + 0, /* 11110 - off */ + 125 /* 11111 - 12.5x */ +}; + static const int hid1_fx_multipliers_x_10[] = { 00, /* 0000 - off */ 00, /* 0001 - off */ @@ -89,22 +127,30 @@ int get_clocks (void) { ulong clock = 0; +#ifdef CFG_BUS_CLK + gd->bus_clk = CFG_BUS_CLK; /* bus clock is a fixed frequency */ +#else + gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */ +#endif + /* calculate the clock frequency based upon the CPU type */ switch (get_cpu_type()) { + case CPU_7447A: case CPU_7448: case CPU_7455: case CPU_7457: /* - * It is assumed that the PLL_EXT line is zero. * Make sure division is done before multiplication to prevent 32-bit * arithmetic overflows which will cause a negative number */ - clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF]; + clock = (gd->bus_clk / 10) * + hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F]; break; case CPU_750GX: case CPU_750FX: - clock = CFG_BUS_CLK * hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10; + clock = gd->bus_clk * + hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10; break; case CPU_7450: @@ -121,7 +167,8 @@ int get_clocks (void) * Make sure division is done before multiplication to prevent 32-bit * arithmetic overflows which will cause a negative number */ - clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[get_hid1 () >> 28]; + clock = (gd->bus_clk / 10) * + hid1_multipliers_x_10[get_hid1 () >> 28]; break; case CPU_UNKNOWN: @@ -131,7 +178,6 @@ int get_clocks (void) } gd->cpu_clk = clock; - gd->bus_clk = CFG_BUS_CLK; return (0); } diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile index f62ec8bc9..f69b1f385 100644 --- a/cpu/at32ap/Makefile +++ b/cpu/at32ap/Makefile @@ -30,7 +30,7 @@ LIB := $(obj)lib$(CPU).a START := start.o SOBJS := entry.o COBJS := cpu.o hsdramc.o exception.o cache.o -COBJS += interrupts.o device.o pm.o pio.o +COBJS += interrupts.o pio.o atmel_mci.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) START := $(addprefix $(obj),$(START)) diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap7000/Makefile index 2ed74d250..d27671211 100644 --- a/cpu/at32ap/at32ap7000/Makefile +++ b/cpu/at32ap/at32ap7000/Makefile @@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)lib$(SOC).a -COBJS := hebi.o devices.o +COBJS := gpio.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/at32ap/at32ap7000/devices.c b/cpu/at32ap/at32ap7000/devices.c deleted file mode 100644 index 8b216e906..000000000 --- a/cpu/at32ap/at32ap7000/devices.c +++ /dev/null @@ -1,448 +0,0 @@ -/* - * Copyright (C) 2006 Atmel Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> - -#include <asm/arch/memory-map.h> -#include <asm/arch/platform.h> - -#include "../sm.h" - -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) - -const struct clock_domain chip_clock[] = { - [CLOCK_CPU] = { - .reg = SM_PM_CPU_MASK, - .id = CLOCK_CPU, - .bridge = NO_DEVICE, - }, - [CLOCK_HSB] = { - .reg = SM_PM_HSB_MASK, - .id = CLOCK_HSB, - .bridge = NO_DEVICE, - }, - [CLOCK_PBA] = { - .reg = SM_PM_PBA_MASK, - .id = CLOCK_PBA, - .bridge = DEVICE_PBA_BRIDGE, - }, - [CLOCK_PBB] = { - .reg = SM_PM_PBB_MASK, - .id = CLOCK_PBB, - .bridge = DEVICE_PBB_BRIDGE, - }, -}; - -static const struct resource hebi_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 0 }, - }, - }, { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 13 }, - }, - }, { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 14 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 27, DEVICE_PIOE, GPIO_FUNC_A, 0 }, - }, - }, -}; -static const struct resource pba_bridge_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 1 }, - } - }, { - .type = RESOURCE_CLOCK, - .u = { - /* HSB-HSB Bridge */ - .clock = { CLOCK_HSB, 4 }, - }, - }, -}; -static const struct resource pbb_bridge_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 2 }, - }, - }, -}; -static const struct resource hramc_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 3 }, - }, - }, -}; -static const struct resource pioa_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 10 }, - }, - }, -}; -static const struct resource piob_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 11 }, - }, - }, -}; -static const struct resource pioc_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 12 }, - }, - }, -}; -static const struct resource piod_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 13 }, - }, - }, -}; -static const struct resource pioe_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 14 }, - }, - }, -}; -static const struct resource sm_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 0 }, - }, - }, -}; -static const struct resource intc_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 1 }, - }, - }, -}; -static const struct resource hmatrix_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 2 }, - }, - }, -}; -#if defined(CFG_HPDC) -static const struct resource hpdc_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 16 }, - }, - }, -}; -#endif -#if defined(CFG_MACB0) -static const struct resource macb0_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 8 }, - }, - }, { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 6 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 19, DEVICE_PIOC, GPIO_FUNC_A, 0 }, - }, - }, -}; -#endif -#if defined(CFG_MACB1) -static const struct resource macb1_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 9 }, - }, - }, { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 7 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 12, DEVICE_PIOC, GPIO_FUNC_B, 19 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 14, DEVICE_PIOD, GPIO_FUNC_B, 2 }, - }, - }, -}; -#endif -#if defined(CFG_LCDC) -static const struct resource lcdc_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 7 }, - }, - }, -}; -#endif -#if defined(CFG_USART0) -static const struct resource usart0_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 3 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 2, DEVICE_PIOA, GPIO_FUNC_B, 8 }, - }, - }, -}; -#endif -#if defined(CFG_USART1) -static const struct resource usart1_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 4 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 2, DEVICE_PIOA, GPIO_FUNC_A, 17 }, - }, - }, -}; -#endif -#if defined(CFG_USART2) -static const struct resource usart2_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 5 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 2, DEVICE_PIOB, GPIO_FUNC_B, 26 }, - }, - }, -}; -#endif -#if defined(CFG_USART3) -static const struct resource usart3_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBA, 6 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 2, DEVICE_PIOB, GPIO_FUNC_B, 17 }, - }, - }, -}; -#endif -#if defined(CFG_MMCI) -static const struct resource mmci_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_PBB, 9 }, - }, - }, { - .type = RESOURCE_GPIO, - .u = { - .gpio = { 6, DEVICE_PIOA, GPIO_FUNC_A, 10 }, - }, - }, -}; -#endif -#if defined(CFG_DMAC) -static const struct resource dmac_resource[] = { - { - .type = RESOURCE_CLOCK, - .u = { - .clock = { CLOCK_HSB, 10 }, - }, - }, -}; -#endif - -const struct device chip_device[] = { - [DEVICE_HEBI] = { - .regs = (void *)HSMC_BASE, - .nr_resources = ARRAY_SIZE(hebi_resource), - .resource = hebi_resource, - }, - [DEVICE_PBA_BRIDGE] = { - .nr_resources = ARRAY_SIZE(pba_bridge_resource), - .resource = pba_bridge_resource, - }, - [DEVICE_PBB_BRIDGE] = { - .nr_resources = ARRAY_SIZE(pbb_bridge_resource), - .resource = pbb_bridge_resource, - }, - [DEVICE_HRAMC] = { - .nr_resources = ARRAY_SIZE(hramc_resource), - .resource = hramc_resource, - }, - [DEVICE_PIOA] = { - .regs = (void *)PIOA_BASE, - .nr_resources = ARRAY_SIZE(pioa_resource), - .resource = pioa_resource, - }, - [DEVICE_PIOB] = { - .regs = (void *)PIOB_BASE, - .nr_resources = ARRAY_SIZE(piob_resource), - .resource = piob_resource, - }, - [DEVICE_PIOC] = { - .regs = (void *)PIOC_BASE, - .nr_resources = ARRAY_SIZE(pioc_resource), - .resource = pioc_resource, - }, - [DEVICE_PIOD] = { - .regs = (void *)PIOD_BASE, - .nr_resources = ARRAY_SIZE(piod_resource), - .resource = piod_resource, - }, - [DEVICE_PIOE] = { - .regs = (void *)PIOE_BASE, - .nr_resources = ARRAY_SIZE(pioe_resource), - .resource = pioe_resource, - }, - [DEVICE_SM] = { - .regs = (void *)SM_BASE, - .nr_resources = ARRAY_SIZE(sm_resource), - .resource = sm_resource, - }, - [DEVICE_INTC] = { - .regs = (void *)INTC_BASE, - .nr_resources = ARRAY_SIZE(intc_resource), - .resource = intc_resource, - }, - [DEVICE_HMATRIX] = { - .regs = (void *)HMATRIX_BASE, - .nr_resources = ARRAY_SIZE(hmatrix_resource), - .resource = hmatrix_resource, - }, -#if defined(CFG_HPDC) - [DEVICE_HPDC] = { - .nr_resources = ARRAY_SIZE(hpdc_resource), - .resource = hpdc_resource, - }, -#endif -#if defined(CFG_MACB0) - [DEVICE_MACB0] = { - .regs = (void *)MACB0_BASE, - .nr_resources = ARRAY_SIZE(macb0_resource), - .resource = macb0_resource, - }, -#endif -#if defined(CFG_MACB1) - [DEVICE_MACB1] = { - .regs = (void *)MACB1_BASE, - .nr_resources = ARRAY_SIZE(macb1_resource), - .resource = macb1_resource, - }, -#endif -#if defined(CFG_LCDC) - [DEVICE_LCDC] = { - .nr_resources = ARRAY_SIZE(lcdc_resource), - .resource = lcdc_resource, - }, -#endif -#if defined(CFG_USART0) - [DEVICE_USART0] = { - .regs = (void *)USART0_BASE, - .nr_resources = ARRAY_SIZE(usart0_resource), - .resource = usart0_resource, - }, -#endif -#if defined(CFG_USART1) - [DEVICE_USART1] = { - .regs = (void *)USART1_BASE, - .nr_resources = ARRAY_SIZE(usart1_resource), - .resource = usart1_resource, - }, -#endif -#if defined(CFG_USART2) - [DEVICE_USART2] = { - .regs = (void *)USART2_BASE, - .nr_resources = ARRAY_SIZE(usart2_resource), - .resource = usart2_resource, - }, -#endif -#if defined(CFG_USART3) - [DEVICE_USART3] = { - .regs = (void *)USART3_BASE, - .nr_resources = ARRAY_SIZE(usart3_resource), - .resource = usart3_resource, - }, -#endif -#if defined(CFG_MMCI) - [DEVICE_MMCI] = { - .regs = (void *)MMCI_BASE, - .nr_resources = ARRAY_SIZE(mmci_resource), - .resource = mmci_resource, - }, -#endif -#if defined(CFG_DMAC) - [DEVICE_DMAC] = { - .regs = (void *)DMAC_BASE, - .nr_resources = ARRAY_SIZE(dmac_resource), - .resource = dmac_resource, - }, -#endif -}; diff --git a/cpu/at32ap/at32ap7000/gpio.c b/cpu/at32ap/at32ap7000/gpio.c new file mode 100644 index 000000000..52f5372a6 --- /dev/null +++ b/cpu/at32ap/at32ap7000/gpio.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#include <asm/arch/gpio.h> + +/* + * Lots of small functions here. We depend on --gc-sections getting + * rid of the ones we don't need. + */ +void gpio_enable_ebi(void) +{ +#ifdef CFG_HSDRAMC +#ifndef CFG_SDRAM_16BIT + gpio_select_periph_A(GPIO_PIN_PE0, 0); + gpio_select_periph_A(GPIO_PIN_PE1, 0); + gpio_select_periph_A(GPIO_PIN_PE2, 0); + gpio_select_periph_A(GPIO_PIN_PE3, 0); + gpio_select_periph_A(GPIO_PIN_PE4, 0); + gpio_select_periph_A(GPIO_PIN_PE5, 0); + gpio_select_periph_A(GPIO_PIN_PE6, 0); + gpio_select_periph_A(GPIO_PIN_PE7, 0); + gpio_select_periph_A(GPIO_PIN_PE8, 0); + gpio_select_periph_A(GPIO_PIN_PE9, 0); + gpio_select_periph_A(GPIO_PIN_PE10, 0); + gpio_select_periph_A(GPIO_PIN_PE11, 0); + gpio_select_periph_A(GPIO_PIN_PE12, 0); + gpio_select_periph_A(GPIO_PIN_PE13, 0); + gpio_select_periph_A(GPIO_PIN_PE14, 0); + gpio_select_periph_A(GPIO_PIN_PE15, 0); +#endif + gpio_select_periph_A(GPIO_PIN_PE26, 0); +#endif +} + +void gpio_enable_usart0(void) +{ + gpio_select_periph_B(GPIO_PIN_PA8, 0); + gpio_select_periph_B(GPIO_PIN_PA9, 0); +} + +void gpio_enable_usart1(void) +{ + gpio_select_periph_A(GPIO_PIN_PA17, 0); + gpio_select_periph_A(GPIO_PIN_PA18, 0); +} + +void gpio_enable_usart2(void) +{ + gpio_select_periph_B(GPIO_PIN_PB26, 0); + gpio_select_periph_B(GPIO_PIN_PB27, 0); +} + +void gpio_enable_usart3(void) +{ + gpio_select_periph_B(GPIO_PIN_PB18, 0); + gpio_select_periph_B(GPIO_PIN_PB19, 0); +} + +void gpio_enable_macb0(void) +{ + gpio_select_periph_A(GPIO_PIN_PC3, 0); /* TXD0 */ + gpio_select_periph_A(GPIO_PIN_PC4, 0); /* TXD1 */ + gpio_select_periph_A(GPIO_PIN_PC7, 0); /* TXEN */ + gpio_select_periph_A(GPIO_PIN_PC8, 0); /* TXCK */ + gpio_select_periph_A(GPIO_PIN_PC9, 0); /* RXD0 */ + gpio_select_periph_A(GPIO_PIN_PC10, 0); /* RXD1 */ + gpio_select_periph_A(GPIO_PIN_PC13, 0); /* RXER */ + gpio_select_periph_A(GPIO_PIN_PC15, 0); /* RXDV */ + gpio_select_periph_A(GPIO_PIN_PC16, 0); /* MDC */ + gpio_select_periph_A(GPIO_PIN_PC17, 0); /* MDIO */ +#if !defined(CONFIG_RMII) + gpio_select_periph_A(GPIO_PIN_PC0, 0); /* COL */ + gpio_select_periph_A(GPIO_PIN_PC1, 0); /* CRS */ + gpio_select_periph_A(GPIO_PIN_PC2, 0); /* TXER */ + gpio_select_periph_A(GPIO_PIN_PC5, 0); /* TXD2 */ + gpio_select_periph_A(GPIO_PIN_PC6, 0); /* TXD3 */ + gpio_select_periph_A(GPIO_PIN_PC11, 0); /* RXD2 */ + gpio_select_periph_A(GPIO_PIN_PC12, 0); /* RXD3 */ + gpio_select_periph_A(GPIO_PIN_PC14, 0); /* RXCK */ + gpio_select_periph_A(GPIO_PIN_PC18, 0); /* SPD */ +#endif +} + +void gpio_enable_macb1(void) +{ + gpio_select_periph_B(GPIO_PIN_PD13, 0); /* TXD0 */ + gpio_select_periph_B(GPIO_PIN_PD14, 0); /* TXD1 */ + gpio_select_periph_B(GPIO_PIN_PD11, 0); /* TXEN */ + gpio_select_periph_B(GPIO_PIN_PD12, 0); /* TXCK */ + gpio_select_periph_B(GPIO_PIN_PD10, 0); /* RXD0 */ + gpio_select_periph_B(GPIO_PIN_PD6, 0); /* RXD1 */ + gpio_select_periph_B(GPIO_PIN_PD5, 0); /* RXER */ + gpio_select_periph_B(GPIO_PIN_PD4, 0); /* RXDV */ + gpio_select_periph_B(GPIO_PIN_PD3, 0); /* MDC */ + gpio_select_periph_B(GPIO_PIN_PD2, 0); /* MDIO */ +#if !defined(CONFIG_RMII) + gpio_select_periph_B(GPIO_PIN_PC19, 0); /* COL */ + gpio_select_periph_B(GPIO_PIN_PC23, 0); /* CRS */ + gpio_select_periph_B(GPIO_PIN_PC26, 0); /* TXER */ + gpio_select_periph_B(GPIO_PIN_PC27, 0); /* TXD2 */ + gpio_select_periph_B(GPIO_PIN_PC28, 0); /* TXD3 */ + gpio_select_periph_B(GPIO_PIN_PC29, 0); /* RXD2 */ + gpio_select_periph_B(GPIO_PIN_PC30, 0); /* RXD3 */ + gpio_select_periph_B(GPIO_PIN_PC24, 0); /* RXCK */ + gpio_select_periph_B(GPIO_PIN_PD15, 0); /* SPD */ +#endif +} + +void gpio_enable_mmci(void) +{ + gpio_select_periph_A(GPIO_PIN_PA10, 0); /* CLK */ + gpio_select_periph_A(GPIO_PIN_PA11, 0); /* CMD */ + gpio_select_periph_A(GPIO_PIN_PA12, 0); /* DATA0 */ + gpio_select_periph_A(GPIO_PIN_PA13, 0); /* DATA1 */ + gpio_select_periph_A(GPIO_PIN_PA14, 0); /* DATA2 */ + gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */ +} diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c new file mode 100644 index 000000000..9f62c0f14 --- /dev/null +++ b/cpu/at32ap/atmel_mci.c @@ -0,0 +1,477 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#ifdef CONFIG_MMC + +#include <part.h> +#include <mmc.h> + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/byteorder.h> +#include <asm/arch/clk.h> +#include <asm/arch/memory-map.h> + +#include "atmel_mci.h" + +#ifdef DEBUG +#define pr_debug(fmt, args...) printf(fmt, ##args) +#else +#define pr_debug(...) do { } while(0) +#endif + +#ifndef CFG_MMC_CLK_OD +#define CFG_MMC_CLK_OD 150000 +#endif + +#ifndef CFG_MMC_CLK_PP +#define CFG_MMC_CLK_PP 5000000 +#endif + +#ifndef CFG_MMC_OP_COND +#define CFG_MMC_OP_COND 0x00100000 +#endif + +#define MMC_DEFAULT_BLKLEN 512 +#define MMC_DEFAULT_RCA 1 + +static unsigned int mmc_rca; +static block_dev_desc_t mmc_blkdev; + +block_dev_desc_t *mmc_get_dev(int dev) +{ + return &mmc_blkdev; +} + +static void mci_set_mode(unsigned long hz, unsigned long blklen) +{ + unsigned long bus_hz; + unsigned long clkdiv; + + bus_hz = get_mci_clk_rate(); + clkdiv = (bus_hz / hz) / 2 - 1; + + pr_debug("mmc: setting clock %lu Hz, block size %lu\n", + hz, blklen); + + if (clkdiv & ~255UL) { + clkdiv = 255; + printf("mmc: clock %lu too low; setting CLKDIV to 255\n", + hz); + } + + blklen &= 0xfffc; + mmci_writel(MR, (MMCI_BF(CLKDIV, clkdiv) + | MMCI_BF(BLKLEN, blklen))); +} + +#define RESP_NO_CRC 1 +#define R1 MMCI_BF(RSPTYP, 1) +#define R2 MMCI_BF(RSPTYP, 2) +#define R3 (R1 | RESP_NO_CRC) +#define R6 R1 +#define NID MMCI_BF(MAXLAT, 0) +#define NCR MMCI_BF(MAXLAT, 1) +#define TRCMD_START MMCI_BF(TRCMD, 1) +#define TRDIR_READ MMCI_BF(TRDIR, 1) +#define TRTYP_BLOCK MMCI_BF(TRTYP, 0) +#define INIT_CMD MMCI_BF(SPCMD, 1) +#define OPEN_DRAIN MMCI_BF(OPDCMD, 1) + +#define ERROR_FLAGS (MMCI_BIT(DTOE) \ + | MMCI_BIT(RDIRE) \ + | MMCI_BIT(RENDE) \ + | MMCI_BIT(RINDE) \ + | MMCI_BIT(RTOE)) + +static int +mmc_cmd(unsigned long cmd, unsigned long arg, + void *resp, unsigned long flags) +{ + unsigned long *response = resp; + int i, response_words = 0; + unsigned long error_flags; + u32 status; + + pr_debug("mmc: CMD%lu 0x%lx (flags 0x%lx)\n", + cmd, arg, flags); + + error_flags = ERROR_FLAGS; + if (!(flags & RESP_NO_CRC)) + error_flags |= MMCI_BIT(RCRCE); + + flags &= ~MMCI_BF(CMDNB, ~0UL); + + if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_48_BIT_RESP) + response_words = 1; + else if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_136_BIT_RESP) + response_words = 4; + + mmci_writel(ARGR, arg); + mmci_writel(CMDR, cmd | flags); + do { + udelay(40); + status = mmci_readl(SR); + } while (!(status & MMCI_BIT(CMDRDY))); + + pr_debug("mmc: status 0x%08lx\n", status); + + if (status & ERROR_FLAGS) { + printf("mmc: command %lu failed (status: 0x%08lx)\n", + cmd, status); + return -EIO; + } + + if (response_words) + pr_debug("mmc: response:"); + + for (i = 0; i < response_words; i++) { + response[i] = mmci_readl(RSPR); + pr_debug(" %08lx", response[i]); + } + pr_debug("\n"); + + return 0; +} + +static int mmc_acmd(unsigned long cmd, unsigned long arg, + void *resp, unsigned long flags) +{ + unsigned long aresp[4]; + int ret; + + /* + * Seems like the APP_CMD part of an ACMD has 64 cycles max + * latency even though the ACMD part doesn't. This isn't + * entirely clear in the SD Card spec, but some cards refuse + * to work if we attempt to use 5 cycles max latency here... + */ + ret = mmc_cmd(MMC_CMD_APP_CMD, 0, aresp, + R1 | NCR | (flags & OPEN_DRAIN)); + if (ret) + return ret; + if ((aresp[0] & (R1_ILLEGAL_COMMAND | R1_APP_CMD)) != R1_APP_CMD) + return -ENODEV; + + ret = mmc_cmd(cmd, arg, resp, flags); + return ret; +} + +static unsigned long +mmc_bread(int dev, unsigned long start, lbaint_t blkcnt, + unsigned long *buffer) +{ + int ret, i = 0; + unsigned long resp[4]; + unsigned long card_status, data; + unsigned long wordcount; + u32 status; + + if (blkcnt == 0) + return 0; + + pr_debug("mmc_bread: dev %d, start %lx, blkcnt %lx\n", + dev, start, blkcnt); + + /* Put the device into Transfer state */ + ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR); + if (ret) goto fail; + + /* Set block length */ + ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR); + if (ret) goto fail; + + pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR)); + + for (i = 0; i < blkcnt; i++, start++) { + ret = mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, + start * mmc_blkdev.blksz, resp, + (R1 | NCR | TRCMD_START | TRDIR_READ + | TRTYP_BLOCK)); + if (ret) goto fail; + + ret = -EIO; + wordcount = 0; + do { + do { + status = mmci_readl(SR); + if (status & (ERROR_FLAGS | MMCI_BIT(OVRE))) + goto fail; + } while (!(status & MMCI_BIT(RXRDY))); + + if (status & MMCI_BIT(RXRDY)) { + data = mmci_readl(RDR); + /* pr_debug("%x\n", data); */ + *buffer++ = data; + wordcount++; + } + } while(wordcount < (512 / 4)); + + pr_debug("mmc: read %u words, waiting for BLKE\n", wordcount); + + do { + status = mmci_readl(SR); + } while (!(status & MMCI_BIT(BLKE))); + + putc('.'); + } + +out: + /* Put the device back into Standby state */ + mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR); + return i; + +fail: + mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR); + printf("mmc: bread failed, card status = ", card_status); + goto out; +} + +static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp) +{ + cid->mid = resp[0] >> 24; + cid->oid = (resp[0] >> 8) & 0xffff; + cid->pnm[0] = resp[0]; + cid->pnm[1] = resp[1] >> 24; + cid->pnm[2] = resp[1] >> 16; + cid->pnm[3] = resp[1] >> 8; + cid->pnm[4] = resp[1]; + cid->pnm[5] = resp[2] >> 24; + cid->pnm[6] = 0; + cid->prv = resp[2] >> 16; + cid->psn = (resp[2] << 16) | (resp[3] >> 16); + cid->mdt = resp[3] >> 8; +} + +static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp) +{ + cid->mid = resp[0] >> 24; + cid->oid = (resp[0] >> 8) & 0xffff; + cid->pnm[0] = resp[0]; + cid->pnm[1] = resp[1] >> 24; + cid->pnm[2] = resp[1] >> 16; + cid->pnm[3] = resp[1] >> 8; + cid->pnm[4] = resp[1]; + cid->pnm[5] = 0; + cid->pnm[6] = 0; + cid->prv = resp[2] >> 24; + cid->psn = (resp[2] << 8) | (resp[3] >> 24); + cid->mdt = (resp[3] >> 8) & 0x0fff; +} + +static void mmc_dump_cid(const struct mmc_cid *cid) +{ + printf("Manufacturer ID: %02lX\n", cid->mid); + printf("OEM/Application ID: %04lX\n", cid->oid); + printf("Product name: %s\n", cid->pnm); + printf("Product Revision: %lu.%lu\n", + cid->prv >> 4, cid->prv & 0x0f); + printf("Product Serial Number: %lu\n", cid->psn); + printf("Manufacturing Date: %02lu/%02lu\n", + cid->mdt >> 4, cid->mdt & 0x0f); +} + +static void mmc_dump_csd(const struct mmc_csd *csd) +{ + unsigned long *csd_raw = (unsigned long *)csd; + printf("CSD data: %08lx %08lx %08lx %08lx\n", + csd_raw[0], csd_raw[1], csd_raw[2], csd_raw[3]); + printf("CSD structure version: 1.%u\n", csd->csd_structure); + printf("MMC System Spec version: %u\n", csd->spec_vers); + printf("Card command classes: %03x\n", csd->ccc); + printf("Read block length: %u\n", 1 << csd->read_bl_len); + if (csd->read_bl_partial) + puts("Supports partial reads\n"); + else + puts("Does not support partial reads\n"); + printf("Write block length: %u\n", 1 << csd->write_bl_len); + if (csd->write_bl_partial) + puts("Supports partial writes\n"); + else + puts("Does not support partial writes\n"); + if (csd->wp_grp_enable) + printf("Supports group WP: %u\n", csd->wp_grp_size + 1); + else + puts("Does not support group WP\n"); + printf("Card capacity: %u bytes\n", + (csd->c_size + 1) * (1 << (csd->c_size_mult + 2)) * + (1 << csd->read_bl_len)); + printf("File format: %u/%u\n", + csd->file_format_grp, csd->file_format); + puts("Write protection: "); + if (csd->perm_write_protect) + puts(" permanent"); + if (csd->tmp_write_protect) + puts(" temporary"); + putc('\n'); +} + +static int mmc_idle_cards(void) +{ + int ret; + + /* Reset and initialize all cards */ + ret = mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0); + if (ret) + return ret; + + /* Keep the bus idle for 74 clock cycles */ + return mmc_cmd(0, 0, NULL, INIT_CMD); +} + +static int sd_init_card(struct mmc_cid *cid, int verbose) +{ + unsigned long resp[4]; + int i, ret = 0; + + mmc_idle_cards(); + for (i = 0; i < 1000; i++) { + ret = mmc_acmd(MMC_ACMD_SD_SEND_OP_COND, CFG_MMC_OP_COND, + resp, R3 | NID); + if (ret || (resp[0] & 0x80000000)) + break; + ret = -ETIMEDOUT; + } + + if (ret) + return ret; + + ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID); + if (ret) + return ret; + sd_parse_cid(cid, resp); + if (verbose) + mmc_dump_cid(cid); + + /* Get RCA of the card that responded */ + ret = mmc_cmd(MMC_CMD_SD_SEND_RELATIVE_ADDR, 0, resp, R6 | NCR); + if (ret) + return ret; + + mmc_rca = resp[0] >> 16; + if (verbose) + printf("SD Card detected (RCA %u)\n", mmc_rca); + return 0; +} + +static int mmc_init_card(struct mmc_cid *cid, int verbose) +{ + unsigned long resp[4]; + int i, ret = 0; + + mmc_idle_cards(); + for (i = 0; i < 1000; i++) { + ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CFG_MMC_OP_COND, resp, + R3 | NID | OPEN_DRAIN); + if (ret || (resp[0] & 0x80000000)) + break; + ret = -ETIMEDOUT; + } + + if (ret) + return ret; + + /* Get CID of all cards. FIXME: Support more than one card */ + ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID | OPEN_DRAIN); + if (ret) + return ret; + mmc_parse_cid(cid, resp); + if (verbose) + mmc_dump_cid(cid); + + /* Set Relative Address of the card that responded */ + ret = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, mmc_rca << 16, resp, + R1 | NCR | OPEN_DRAIN); + return ret; +} + +int mmc_init(int verbose) +{ + struct mmc_cid cid; + struct mmc_csd csd; + int ret; + + /* Initialize controller */ + mmci_writel(CR, MMCI_BIT(SWRST)); + mmci_writel(CR, MMCI_BIT(MCIEN)); + mmci_writel(DTOR, 0x5f); + mmci_writel(IDR, ~0UL); + mci_set_mode(CFG_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); + + ret = sd_init_card(&cid, verbose); + if (ret) { + mmc_rca = MMC_DEFAULT_RCA; + ret = mmc_init_card(&cid, verbose); + } + if (ret) + return ret; + + /* Get CSD from the card */ + ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, &csd, R2 | NCR); + if (ret) + return ret; + if (verbose) + mmc_dump_csd(&csd); + + /* Initialize the blockdev structure */ + mmc_blkdev.if_type = IF_TYPE_MMC; + mmc_blkdev.part_type = PART_TYPE_DOS; + mmc_blkdev.block_read = mmc_bread; + sprintf((char *)mmc_blkdev.vendor, + "Man %02x%04x Snr %08x", + cid.mid, cid.oid, cid.psn); + strncpy((char *)mmc_blkdev.product, cid.pnm, + sizeof(mmc_blkdev.product)); + sprintf((char *)mmc_blkdev.revision, "%x %x", + cid.prv >> 4, cid.prv & 0x0f); + mmc_blkdev.blksz = 1 << csd.read_bl_len; + mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2)); + + mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz); + +#if 0 + if (fat_register_device(&mmc_blkdev, 1)) + printf("Could not register MMC fat device\n"); +#else + init_part(&mmc_blkdev); +#endif + + return 0; +} + +int mmc_read(ulong src, uchar *dst, int size) +{ + return -ENOSYS; +} + +int mmc_write(uchar *src, ulong dst, int size) +{ + return -ENOSYS; +} + +int mmc2info(ulong addr) +{ + return 0; +} + +#endif /* CONFIG_MMC */ diff --git a/cpu/at32ap/atmel_mci.h b/cpu/at32ap/atmel_mci.h new file mode 100644 index 000000000..0ffbc4fd0 --- /dev/null +++ b/cpu/at32ap/atmel_mci.h @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CPU_AT32AP_ATMEL_MCI_H__ +#define __CPU_AT32AP_ATMEL_MCI_H__ + +/* Atmel MultiMedia Card Interface (MCI) registers */ +#define MMCI_CR 0x0000 +#define MMCI_MR 0x0004 +#define MMCI_DTOR 0x0008 +#define MMCI_SDCR 0x000c +#define MMCI_ARGR 0x0010 +#define MMCI_CMDR 0x0014 +#define MMCI_RSPR 0x0020 +#define MMCI_RSPR1 0x0024 +#define MMCI_RSPR2 0x0028 +#define MMCI_RSPR3 0x002c +#define MMCI_RDR 0x0030 +#define MMCI_TDR 0x0034 +#define MMCI_SR 0x0040 +#define MMCI_IER 0x0044 +#define MMCI_IDR 0x0048 +#define MMCI_IMR 0x004c + +/* Bitfields in CR */ +#define MMCI_MCIEN_OFFSET 0 +#define MMCI_MCIEN_SIZE 1 +#define MMCI_MCIDIS_OFFSET 1 +#define MMCI_MCIDIS_SIZE 1 +#define MMCI_PWSEN_OFFSET 2 +#define MMCI_PWSEN_SIZE 1 +#define MMCI_PWSDIS_OFFSET 3 +#define MMCI_PWSDIS_SIZE 1 +#define MMCI_SWRST_OFFSET 7 +#define MMCI_SWRST_SIZE 1 + +/* Bitfields in MR */ +#define MMCI_CLKDIV_OFFSET 0 +#define MMCI_CLKDIV_SIZE 8 +#define MMCI_PWSDIV_OFFSET 8 +#define MMCI_PWSDIV_SIZE 3 +#define MMCI_PDCPADV_OFFSET 14 +#define MMCI_PDCPADV_SIZE 1 +#define MMCI_PDCMODE_OFFSET 15 +#define MMCI_PDCMODE_SIZE 1 +#define MMCI_BLKLEN_OFFSET 16 +#define MMCI_BLKLEN_SIZE 16 + +/* Bitfields in DTOR */ +#define MMCI_DTOCYC_OFFSET 0 +#define MMCI_DTOCYC_SIZE 4 +#define MMCI_DTOMUL_OFFSET 4 +#define MMCI_DTOMUL_SIZE 3 + +/* Bitfields in SDCR */ +#define MMCI_SCDSEL_OFFSET 0 +#define MMCI_SCDSEL_SIZE 4 +#define MMCI_SCDBUS_OFFSET 7 +#define MMCI_SCDBUS_SIZE 1 + +/* Bitfields in ARGR */ +#define MMCI_ARG_OFFSET 0 +#define MMCI_ARG_SIZE 32 + +/* Bitfields in CMDR */ +#define MMCI_CMDNB_OFFSET 0 +#define MMCI_CMDNB_SIZE 6 +#define MMCI_RSPTYP_OFFSET 6 +#define MMCI_RSPTYP_SIZE 2 +#define MMCI_SPCMD_OFFSET 8 +#define MMCI_SPCMD_SIZE 3 +#define MMCI_OPDCMD_OFFSET 11 +#define MMCI_OPDCMD_SIZE 1 +#define MMCI_MAXLAT_OFFSET 12 +#define MMCI_MAXLAT_SIZE 1 +#define MMCI_TRCMD_OFFSET 16 +#define MMCI_TRCMD_SIZE 2 +#define MMCI_TRDIR_OFFSET 18 +#define MMCI_TRDIR_SIZE 1 +#define MMCI_TRTYP_OFFSET 19 +#define MMCI_TRTYP_SIZE 2 + +/* Bitfields in RSPRx */ +#define MMCI_RSP_OFFSET 0 +#define MMCI_RSP_SIZE 32 + +/* Bitfields in SR/IER/IDR/IMR */ +#define MMCI_CMDRDY_OFFSET 0 +#define MMCI_CMDRDY_SIZE 1 +#define MMCI_RXRDY_OFFSET 1 +#define MMCI_RXRDY_SIZE 1 +#define MMCI_TXRDY_OFFSET 2 +#define MMCI_TXRDY_SIZE 1 +#define MMCI_BLKE_OFFSET 3 +#define MMCI_BLKE_SIZE 1 +#define MMCI_DTIP_OFFSET 4 +#define MMCI_DTIP_SIZE 1 +#define MMCI_NOTBUSY_OFFSET 5 +#define MMCI_NOTBUSY_SIZE 1 +#define MMCI_ENDRX_OFFSET 6 +#define MMCI_ENDRX_SIZE 1 +#define MMCI_ENDTX_OFFSET 7 +#define MMCI_ENDTX_SIZE 1 +#define MMCI_RXBUFF_OFFSET 14 +#define MMCI_RXBUFF_SIZE 1 +#define MMCI_TXBUFE_OFFSET 15 +#define MMCI_TXBUFE_SIZE 1 +#define MMCI_RINDE_OFFSET 16 +#define MMCI_RINDE_SIZE 1 +#define MMCI_RDIRE_OFFSET 17 +#define MMCI_RDIRE_SIZE 1 +#define MMCI_RCRCE_OFFSET 18 +#define MMCI_RCRCE_SIZE 1 +#define MMCI_RENDE_OFFSET 19 +#define MMCI_RENDE_SIZE 1 +#define MMCI_RTOE_OFFSET 20 +#define MMCI_RTOE_SIZE 1 +#define MMCI_DCRCE_OFFSET 21 +#define MMCI_DCRCE_SIZE 1 +#define MMCI_DTOE_OFFSET 22 +#define MMCI_DTOE_SIZE 1 +#define MMCI_OVRE_OFFSET 30 +#define MMCI_OVRE_SIZE 1 +#define MMCI_UNRE_OFFSET 31 +#define MMCI_UNRE_SIZE 1 + +/* Constants for DTOMUL */ +#define MMCI_DTOMUL_1_CYCLE 0 +#define MMCI_DTOMUL_16_CYCLES 1 +#define MMCI_DTOMUL_128_CYCLES 2 +#define MMCI_DTOMUL_256_CYCLES 3 +#define MMCI_DTOMUL_1024_CYCLES 4 +#define MMCI_DTOMUL_4096_CYCLES 5 +#define MMCI_DTOMUL_65536_CYCLES 6 +#define MMCI_DTOMUL_1048576_CYCLES 7 + +/* Constants for RSPTYP */ +#define MMCI_RSPTYP_NO_RESP 0 +#define MMCI_RSPTYP_48_BIT_RESP 1 +#define MMCI_RSPTYP_136_BIT_RESP 2 + +/* Constants for SPCMD */ +#define MMCI_SPCMD_NO_SPEC_CMD 0 +#define MMCI_SPCMD_INIT_CMD 1 +#define MMCI_SPCMD_SYNC_CMD 2 +#define MMCI_SPCMD_INT_CMD 4 +#define MMCI_SPCMD_INT_RESP 5 + +/* Constants for TRCMD */ +#define MMCI_TRCMD_NO_TRANS 0 +#define MMCI_TRCMD_START_TRANS 1 +#define MMCI_TRCMD_STOP_TRANS 2 + +/* Constants for TRTYP */ +#define MMCI_TRTYP_BLOCK 0 +#define MMCI_TRTYP_MULTI_BLOCK 1 +#define MMCI_TRTYP_STREAM 2 + +/* Bit manipulation macros */ +#define MMCI_BIT(name) \ + (1 << MMCI_##name##_OFFSET) +#define MMCI_BF(name,value) \ + (((value) & ((1 << MMCI_##name##_SIZE) - 1)) \ + << MMCI_##name##_OFFSET) +#define MMCI_BFEXT(name,value) \ + (((value) >> MMCI_##name##_OFFSET)\ + & ((1 << MMCI_##name##_SIZE) - 1)) +#define MMCI_BFINS(name,value,old) \ + (((old) & ~(((1 << MMCI_##name##_SIZE) - 1) \ + << MMCI_##name##_OFFSET)) \ + | MMCI_BF(name,value)) + +/* Register access macros */ +#define mmci_readl(reg) \ + readl((void *)MMCI_BASE + MMCI_##reg) +#define mmci_writel(reg,value) \ + writel((value), (void *)MMCI_BASE + MMCI_##reg) + +#endif /* __CPU_AT32AP_ATMEL_MCI_H__ */ diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c index 37e3ea040..311466b78 100644 --- a/cpu/at32ap/cpu.c +++ b/cpu/at32ap/cpu.c @@ -26,33 +26,79 @@ #include <asm/sections.h> #include <asm/sysreg.h> +#include <asm/arch/clk.h> #include <asm/arch/memory-map.h> -#include <asm/arch/platform.h> #include "hsmc3.h" +#include "sm.h" + +/* Sanity checks */ +#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \ + || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBA) \ + || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBB) +# error Constraint fCPU >= fHSB >= fPB{A,B} violated +#endif +#if defined(CONFIG_PLL) && ((CFG_PLL0_MUL < 1) || (CFG_PLL0_DIV < 1)) +# error Invalid PLL multiplier and/or divider +#endif DECLARE_GLOBAL_DATA_PTR; +static void pm_init(void) +{ + uint32_t cksel; + +#ifdef CONFIG_PLL + /* Initialize the PLL */ + sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES) + | SM_BF(PLLMUL, CFG_PLL0_MUL - 1) + | SM_BF(PLLDIV, CFG_PLL0_DIV - 1) + | SM_BF(PLLOPT, CFG_PLL0_OPT) + | SM_BF(PLLOSC, 0) + | SM_BIT(PLLEN))); + + /* Wait for lock */ + while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ; +#endif + + /* Set up clocks for the CPU and all peripheral buses */ + cksel = 0; + if (CFG_CLKDIV_CPU) + cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1); + if (CFG_CLKDIV_HSB) + cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1); + if (CFG_CLKDIV_PBA) + cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1); + if (CFG_CLKDIV_PBB) + cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1); + sm_writel(PM_CKSEL, cksel); + + gd->cpu_hz = get_cpu_clk_rate(); + +#ifdef CONFIG_PLL + /* Use PLL0 as main clock */ + sm_writel(PM_MCCTRL, SM_BIT(PLLSEL)); +#endif +} + int cpu_init(void) { - const struct device *hebi; extern void _evba(void); char *p; gd->cpu_hz = CFG_OSC0_HZ; - /* fff03400: 00010001 04030402 00050005 10011103 */ - hebi = get_device(DEVICE_HEBI); - hsmc3_writel(hebi, MODE0, 0x00031103); - hsmc3_writel(hebi, CYCLE0, 0x000c000d); - hsmc3_writel(hebi, PULSE0, 0x0b0a0906); - hsmc3_writel(hebi, SETUP0, 0x00010002); + /* TODO: Move somewhere else, but needs to be run before we + * increase the clock frequency. */ + hsmc3_writel(MODE0, 0x00031103); + hsmc3_writel(CYCLE0, 0x000c000d); + hsmc3_writel(PULSE0, 0x0b0a0906); + hsmc3_writel(SETUP0, 0x00010002); pm_init(); sysreg_write(EVBA, (unsigned long)&_evba); asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET)); - gd->console_uart = get_device(CFG_CONSOLE_UART_DEV); /* Lock everything that mess with the flash in the icache */ for (p = __flashprog_start; p <= (__flashprog_end + CFG_ICACHE_LINESZ); diff --git a/cpu/at32ap/device.c b/cpu/at32ap/device.c deleted file mode 100644 index 89914b6b5..000000000 --- a/cpu/at32ap/device.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright (C) 2006 Atmel Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> - -#include <asm/arch/platform.h> - -#include "sm.h" - -struct device_state { - int refcount; -}; - -static struct device_state device_state[NR_DEVICES]; - -static int claim_resource(const struct resource *res) -{ - int ret = 0; - - switch (res->type) { - case RESOURCE_GPIO: - ret = gpio_set_func(res->u.gpio.gpio_dev, - res->u.gpio.start, - res->u.gpio.nr_pins, - res->u.gpio.func); - break; - case RESOURCE_CLOCK: - ret = pm_enable_clock(res->u.clock.id, res->u.clock.index); - break; - } - - return ret; -} - -static void free_resource(const struct resource *res) -{ - switch (res->type) { - case RESOURCE_GPIO: - gpio_free(res->u.gpio.gpio_dev, res->u.gpio.start, - res->u.gpio.nr_pins); - break; - case RESOURCE_CLOCK: - pm_disable_clock(res->u.clock.id, res->u.clock.index); - break; - } -} - -static int init_dev(const struct device *dev) -{ - unsigned int i; - int ret = 0; - - for (i = 0; i < dev->nr_resources; i++) { - ret = claim_resource(&dev->resource[i]); - if (ret) - goto cleanup; - } - - return 0; - -cleanup: - while (i--) - free_resource(&dev->resource[i]); - - return ret; -} - -const struct device *get_device(enum device_id devid) -{ - struct device_state *devstate; - const struct device *dev; - unsigned long flags; - int initialized = 0; - int ret = 0; - - devstate = &device_state[devid]; - dev = &chip_device[devid]; - - flags = disable_interrupts(); - if (devstate->refcount++) - initialized = 1; - if (flags) - enable_interrupts(); - - if (!initialized) - ret = init_dev(dev); - - return ret ? NULL : dev; -} - -void put_device(const struct device *dev) -{ - struct device_state *devstate; - unsigned long devid, flags; - - devid = (unsigned long)(dev - chip_device) / sizeof(struct device); - devstate = &device_state[devid]; - - flags = disable_interrupts(); - devstate--; - if (!devstate) { - unsigned int i; - for (i = 0; i < dev->nr_resources; i++) - free_resource(&dev->resource[i]); - } - if (flags) - enable_interrupts(); -} diff --git a/cpu/at32ap/entry.S b/cpu/at32ap/entry.S index b52d798be..a6fc68867 100644 --- a/cpu/at32ap/entry.S +++ b/cpu/at32ap/entry.S @@ -42,8 +42,7 @@ timer_interrupt_handler: * We're running at interrupt level 3, so we don't need to save * r8-r12 or lr to the stack. */ - mov r8, lo(timer_overflow) - orh r8, hi(timer_overflow) + lda.w r8, timer_overflow ld.w r9, r8[0] mov r10, -1 mtsr SYSREG_COMPARE, r10 diff --git a/cpu/at32ap/exception.c b/cpu/at32ap/exception.c index 4123c4461..0672685cd 100644 --- a/cpu/at32ap/exception.c +++ b/cpu/at32ap/exception.c @@ -24,6 +24,8 @@ #include <asm/sysreg.h> #include <asm/ptrace.h> +DECLARE_GLOBAL_DATA_PTR; + static const char * const cpu_modes[8] = { "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1", "Interrupt level 2", "Interrupt level 3", "Exception", "NMI" @@ -109,11 +111,10 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs) printf("CPU Mode: %s\n", cpu_modes[mode]); /* Avoid exception loops */ - if (regs->sp >= CFG_INIT_SP_ADDR - || regs->sp < (CFG_INIT_SP_ADDR - CONFIG_STACKSIZE)) + if (regs->sp < CFG_SDRAM_BASE || regs->sp >= gd->stack_end) printf("\nStack pointer seems bogus, won't do stack dump\n"); else - dump_mem("\nStack: ", regs->sp, CFG_INIT_SP_ADDR); + dump_mem("\nStack: ", regs->sp, gd->stack_end); panic("Unhandled exception\n"); } diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c index f36da3545..a936e0316 100644 --- a/cpu/at32ap/hsdramc.c +++ b/cpu/at32ap/hsdramc.c @@ -25,17 +25,11 @@ #include <asm/io.h> #include <asm/sdram.h> -#include <asm/arch/platform.h> +#include <asm/arch/clk.h> +#include <asm/arch/memory-map.h> #include "hsdramc1.h" -struct hsdramc { - const struct device *hebi; - void *regs; -}; - -static struct hsdramc hsdramc; - unsigned long sdram_init(const struct sdram_info *info) { unsigned long *sdram = (unsigned long *)uncached(info->phys_addr); @@ -44,16 +38,6 @@ unsigned long sdram_init(const struct sdram_info *info) unsigned long bus_hz; unsigned int i; - hsdramc.hebi = get_device(DEVICE_HEBI); - if (!hsdramc.hebi) - return 0; - - /* FIXME: Both of these lines are complete hacks */ - hsdramc.regs = hsdramc.hebi->regs + 0x400; - bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id); - - cpu_enable_sdram(); - tmp = (HSDRAMC1_BF(NC, info->col_bits - 8) | HSDRAMC1_BF(NR, info->row_bits - 11) | HSDRAMC1_BF(NB, info->bank_bits - 1) @@ -74,7 +58,7 @@ unsigned long sdram_init(const struct sdram_info *info) + info->bank_bits + 2); #endif - hsdramc1_writel(&hsdramc, CR, tmp); + hsdramc1_writel(CR, tmp); /* * Initialization sequence for SDRAM, from the data sheet: @@ -87,15 +71,15 @@ unsigned long sdram_init(const struct sdram_info *info) /* * 2. A Precharge All command is issued to the SDRAM */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE); + hsdramc1_readl(MR); writel(0, sdram); /* * 3. Eight auto-refresh (CBR) cycles are provided */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH); + hsdramc1_readl(MR); for (i = 0; i < 8; i++) writel(0, sdram); @@ -106,8 +90,8 @@ unsigned long sdram_init(const struct sdram_info *info) * * CAS from info struct, burst length 1, serial burst type */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE); + hsdramc1_readl(MR); writel(0, sdram + (info->cas << 4)); /* @@ -117,9 +101,9 @@ unsigned long sdram_init(const struct sdram_info *info) * From the timing diagram, it looks like tMRD is 3 * cycles...try a dummy read from the peripheral bus. */ - hsdramc1_readl(&hsdramc, MR); - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_readl(MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL); + hsdramc1_readl(MR); writel(0, sdram); /* @@ -128,7 +112,8 @@ unsigned long sdram_init(const struct sdram_info *info) * * 15.6 us is a typical value for a burst of length one */ - hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000); + bus_hz = get_sdram_clk_rate(); + hsdramc1_writel(TR, (156 * (bus_hz / 1000)) / 10000); printf("SDRAM: %u MB at address 0x%08lx\n", sdram_size >> 20, info->phys_addr); diff --git a/cpu/at32ap/hsdramc1.h b/cpu/at32ap/hsdramc1.h index ce229bca1..305d2cb5d 100644 --- a/cpu/at32ap/hsdramc1.h +++ b/cpu/at32ap/hsdramc1.h @@ -135,9 +135,9 @@ | HSDRAMC1_BF(name,value)) /* Register access macros */ -#define hsdramc1_readl(port,reg) \ - readl((port)->regs + HSDRAMC1_##reg) -#define hsdramc1_writel(port,reg,value) \ - writel((value), (port)->regs + HSDRAMC1_##reg) +#define hsdramc1_readl(reg) \ + readl((void *)HSDRAMC_BASE + HSDRAMC1_##reg) +#define hsdramc1_writel(reg,value) \ + writel((value), (void *)HSDRAMC_BASE + HSDRAMC1_##reg) #endif /* __ASM_AVR32_HSDRAMC1_H__ */ diff --git a/cpu/at32ap/hsmc3.h b/cpu/at32ap/hsmc3.h index ec78cee71..ca533b922 100644 --- a/cpu/at32ap/hsmc3.h +++ b/cpu/at32ap/hsmc3.h @@ -118,9 +118,9 @@ | HSMC3_BF(name,value)) /* Register access macros */ -#define hsmc3_readl(port,reg) \ - readl((port)->regs + HSMC3_##reg) -#define hsmc3_writel(port,reg,value) \ - writel((value), (port)->regs + HSMC3_##reg) +#define hsmc3_readl(reg) \ + readl((void *)HSMC_BASE + HSMC3_##reg) +#define hsmc3_writel(reg,value) \ + writel((value), (void *)HSMC_BASE + HSMC3_##reg) #endif /* __CPU_AT32AP_HSMC3_H__ */ diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c index d720cfa94..c9e04993c 100644 --- a/cpu/at32ap/interrupts.c +++ b/cpu/at32ap/interrupts.c @@ -27,7 +27,7 @@ #include <asm/processor.h> #include <asm/sysreg.h> -#include <asm/arch/platform.h> +#include <asm/arch/memory-map.h> #define HANDLER_MASK 0x00ffffff #define INTLEV_SHIFT 30 @@ -44,8 +44,6 @@ volatile unsigned long timer_overflow; */ static unsigned long tb_factor; -static const struct device *intc_dev; - unsigned long get_tbclk(void) { return gd->cpu_hz; @@ -117,16 +115,19 @@ void udelay(unsigned long usec) static int set_interrupt_handler(unsigned int nr, void (*handler)(void), unsigned int priority) { + extern void _evba(void); unsigned long intpr; unsigned long handler_addr = (unsigned long)handler; + handler_addr -= (unsigned long)&_evba; + if ((handler_addr & HANDLER_MASK) != handler_addr || (priority & INTLEV_MASK) != priority) return -EINVAL; intpr = (handler_addr & HANDLER_MASK); intpr |= (priority & INTLEV_MASK) << INTLEV_SHIFT; - writel(intpr, intc_dev->regs + 4 * nr); + writel(intpr, (void *)INTC_BASE + 4 * nr); return 0; } @@ -143,10 +144,7 @@ void timer_init(void) do_div(tmp, gd->cpu_hz); tb_factor = (u32)tmp; - intc_dev = get_device(DEVICE_INTC); - - if (!intc_dev - || set_interrupt_handler(0, &timer_interrupt_handler, 3)) + if (set_interrupt_handler(0, &timer_interrupt_handler, 3)) return; /* For all practical purposes, this gives us an overflow interrupt */ diff --git a/cpu/at32ap/pio.c b/cpu/at32ap/pio.c index 8b6c3a35d..9ba0b8ea8 100644 --- a/cpu/at32ap/pio.c +++ b/cpu/at32ap/pio.c @@ -21,74 +21,40 @@ */ #include <common.h> -#include <asm/errno.h> #include <asm/io.h> -#include <asm/arch/platform.h> +#include <asm/arch/gpio.h> +#include <asm/arch/memory-map.h> #include "pio2.h" -struct pio_state { - const struct device *dev; - u32 alloc_mask; -}; - -static struct pio_state pio_state[CFG_NR_PIOS]; - -int gpio_set_func(enum device_id gpio_devid, unsigned int start, - unsigned int nr_pins, enum gpio_func func) +void gpio_select_periph_A(unsigned int pin, int use_pullup) { - const struct device *gpio; - struct pio_state *state; - u32 mask; - - state = &pio_state[gpio_devid - DEVICE_PIOA]; - - gpio = get_device(gpio_devid); - if (!gpio) - return -EBUSY; - - state->dev = gpio; - mask = ((1 << nr_pins) - 1) << start; - - if (mask & state->alloc_mask) { - put_device(gpio); - return -EBUSY; - } - state->alloc_mask |= mask; - - switch (func) { - case GPIO_FUNC_GPIO: - /* TODO */ - return -EINVAL; - case GPIO_FUNC_A: - pio2_writel(gpio, ASR, mask); - pio2_writel(gpio, PDR, mask); - pio2_writel(gpio, PUDR, mask); - break; - case GPIO_FUNC_B: - pio2_writel(gpio, BSR, mask); - pio2_writel(gpio, PDR, mask); - pio2_writel(gpio, PUDR, mask); - break; - } - - return 0; + void *base = gpio_pin_to_addr(pin); + uint32_t mask = 1 << (pin & 0x1f); + + if (!base) + panic("Invalid GPIO pin %u\n", pin); + + pio2_writel(base, ASR, mask); + pio2_writel(base, PDR, mask); + if (use_pullup) + pio2_writel(base, PUER, mask); + else + pio2_writel(base, PUDR, mask); } -void gpio_free(enum device_id gpio_devid, unsigned int start, - unsigned int nr_pins) +void gpio_select_periph_B(unsigned int pin, int use_pullup) { - const struct device *gpio; - struct pio_state *state; - u32 mask; - - state = &pio_state[gpio_devid - DEVICE_PIOA]; - gpio = state->dev; - mask = ((1 << nr_pins) - 1) << start; - - pio2_writel(gpio, ODR, mask); - pio2_writel(gpio, PER, mask); - - state->alloc_mask &= ~mask; - put_device(gpio); + void *base = gpio_pin_to_addr(pin); + uint32_t mask = 1 << (pin & 0x1f); + + if (!base) + panic("Invalid GPIO pin %u\n", pin); + + pio2_writel(base, BSR, mask); + pio2_writel(base, PDR, mask); + if (use_pullup) + pio2_writel(base, PUER, mask); + else + pio2_writel(base, PUDR, mask); } diff --git a/cpu/at32ap/pio2.h b/cpu/at32ap/pio2.h index 6b79de3c7..9719ea8c4 100644 --- a/cpu/at32ap/pio2.h +++ b/cpu/at32ap/pio2.h @@ -36,9 +36,9 @@ #define PIO2_OWSR 0x00a8 /* Register access macros */ -#define pio2_readl(port,reg) \ - readl((port)->regs + PIO2_##reg) -#define pio2_writel(port,reg,value) \ - writel((value), (port)->regs + PIO2_##reg) +#define pio2_readl(base,reg) \ + readl((void *)base + PIO2_##reg) +#define pio2_writel(base,reg,value) \ + writel((value), (void *)base + PIO2_##reg) #endif /* __CPU_AT32AP_PIO2_H__ */ diff --git a/cpu/at32ap/pm.c b/cpu/at32ap/pm.c index 01ac325ee..c78d547f8 100644 --- a/cpu/at32ap/pm.c +++ b/cpu/at32ap/pm.c @@ -26,138 +26,17 @@ #include <asm/io.h> #include <asm/arch/memory-map.h> -#include <asm/arch/platform.h> #include "sm.h" -/* Sanity checks */ -#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \ - || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBA) \ - || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBB) -# error Constraint fCPU >= fHSB >= fPB{A,B} violated -#endif -#if defined(CONFIG_PLL) && ((CFG_PLL0_MUL < 1) || (CFG_PLL0_DIV < 1)) -# error Invalid PLL multiplier and/or divider -#endif - -DECLARE_GLOBAL_DATA_PTR; - -struct clock_domain_state { - const struct device *bridge; - unsigned long freq; - u32 mask; -}; -static struct clock_domain_state ckd_state[NR_CLOCK_DOMAINS]; - -int pm_enable_clock(enum clock_domain_id id, unsigned int index) -{ - const struct clock_domain *ckd = &chip_clock[id]; - struct clock_domain_state *state = &ckd_state[id]; - - if (ckd->bridge != NO_DEVICE) { - state->bridge = get_device(ckd->bridge); - if (!state->bridge) - return -EBUSY; - } - - state->mask |= 1 << index; - if (gd->sm) - writel(state->mask, gd->sm->regs + ckd->reg); - - return 0; -} - -void pm_disable_clock(enum clock_domain_id id, unsigned int index) -{ - const struct clock_domain *ckd = &chip_clock[id]; - struct clock_domain_state *state = &ckd_state[id]; - - state->mask &= ~(1 << index); - if (gd->sm) - writel(state->mask, gd->sm->regs + ckd->reg); - - if (ckd->bridge) - put_device(state->bridge); -} - -unsigned long pm_get_clock_freq(enum clock_domain_id domain) -{ - return ckd_state[domain].freq; -} - -void pm_init(void) -{ - uint32_t cksel = 0; - unsigned long main_clock; - - /* Make sure we don't disable any device we're already using */ - get_device(DEVICE_HRAMC); - get_device(DEVICE_HEBI); - - /* Enable the PICO as well */ - ckd_state[CLOCK_CPU].mask |= 1; - - gd->sm = get_device(DEVICE_SM); - if (!gd->sm) - panic("Unable to claim system manager device!\n"); - - /* Disable any devices that haven't been explicitly claimed */ - sm_writel(gd->sm, PM_PBB_MASK, ckd_state[CLOCK_PBB].mask); - sm_writel(gd->sm, PM_PBA_MASK, ckd_state[CLOCK_PBA].mask); - sm_writel(gd->sm, PM_HSB_MASK, ckd_state[CLOCK_HSB].mask); - sm_writel(gd->sm, PM_CPU_MASK, ckd_state[CLOCK_CPU].mask); #ifdef CONFIG_PLL - /* Initialize the PLL */ - main_clock = (CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL; - - sm_writel(gd->sm, PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES) - | SM_BF(PLLMUL, CFG_PLL0_MUL - 1) - | SM_BF(PLLDIV, CFG_PLL0_DIV - 1) - | SM_BF(PLLOPT, CFG_PLL0_OPT) - | SM_BF(PLLOSC, 0) - | SM_BIT(PLLEN))); - - /* Wait for lock */ - while (!(sm_readl(gd->sm, PM_ISR) & SM_BIT(LOCK0))) ; +#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) #else - main_clock = CFG_OSC0_HZ; +#define MAIN_CLK_RATE (CFG_OSC0_HZ) #endif - /* Set up clocks for the CPU and all peripheral buses */ - if (CFG_CLKDIV_CPU) { - cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1); - ckd_state[CLOCK_CPU].freq = main_clock / (1 << CFG_CLKDIV_CPU); - } else { - ckd_state[CLOCK_CPU].freq = main_clock; - } - if (CFG_CLKDIV_HSB) { - cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1); - ckd_state[CLOCK_HSB].freq = main_clock / (1 << CFG_CLKDIV_HSB); - } else { - ckd_state[CLOCK_HSB].freq = main_clock; - } - if (CFG_CLKDIV_PBA) { - cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1); - ckd_state[CLOCK_PBA].freq = main_clock / (1 << CFG_CLKDIV_PBA); - } else { - ckd_state[CLOCK_PBA].freq = main_clock; - } - if (CFG_CLKDIV_PBB) { - cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1); - ckd_state[CLOCK_PBB].freq = main_clock / (1 << CFG_CLKDIV_PBB); - } else { - ckd_state[CLOCK_PBB].freq = main_clock; - } - sm_writel(gd->sm, PM_CKSEL, cksel); - - /* CFG_HZ currently depends on cpu_hz */ - gd->cpu_hz = ckd_state[CLOCK_CPU].freq; +DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_PLL - /* Use PLL0 as main clock */ - sm_writel(gd->sm, PM_MCCTRL, SM_BIT(PLLSEL)); -#endif -} #endif /* CFG_POWER_MANAGER */ diff --git a/cpu/at32ap/sm.h b/cpu/at32ap/sm.h index ce81ef0a4..6492c8e81 100644 --- a/cpu/at32ap/sm.h +++ b/cpu/at32ap/sm.h @@ -196,9 +196,9 @@ | SM_BF(name,value)) /* Register access macros */ -#define sm_readl(port,reg) \ - readl((port)->regs + SM_##reg) -#define sm_writel(port,reg,value) \ - writel((value), (port)->regs + SM_##reg) +#define sm_readl(reg) \ + readl((void *)SM_BASE + SM_##reg) +#define sm_writel(reg,value) \ + writel((value), (void *)SM_BASE + SM_##reg) #endif /* __CPU_AT32AP_SM_H__ */ diff --git a/cpu/at32ap/start.S b/cpu/at32ap/start.S index 79ee33b1f..ab8c2b73d 100644 --- a/cpu/at32ap/start.S +++ b/cpu/at32ap/start.S @@ -70,32 +70,12 @@ _start: 2: lddpc sp, sp_init - /* - * Relocate the data section and initialize .bss. Everything - * is guaranteed to be at least doubleword aligned by the - * linker script. - */ - lddpc r12, .Ldata_vma - lddpc r11, .Ldata_lma - lddpc r10, .Ldata_end - sub r10, r12 -4: ld.d r8, r11++ - sub r10, 8 - st.d r12++, r8 - brne 4b - - mov r8, 0 - mov r9, 0 - lddpc r10, .Lbss_end - sub r10, r12 -4: sub r10, 8 - st.d r12++, r8 - brne 4b - /* Initialize the GOT pointer */ lddpc r6, got_init 3: rsub r6, pc - ld.w pc, r6[start_u_boot@got] + + /* Let's go */ + rjmp board_init_f .align 2 .type sp_init,@object @@ -103,11 +83,82 @@ sp_init: .long CFG_INIT_SP_ADDR got_init: .long 3b - _GLOBAL_OFFSET_TABLE_ -.Ldata_lma: - .long __data_lma -.Ldata_vma: - .long _data -.Ldata_end: - .long _edata -.Lbss_end: - .long _end + + /* + * void relocate_code(new_sp, new_gd, monitor_addr) + * + * Relocate the u-boot image into RAM and continue from there. + * Does not return. + */ + .global relocate_code + .type relocate_code,@function +relocate_code: + mov sp, r12 /* use new stack */ + mov r12, r11 /* save new_gd */ + mov r11, r10 /* save destination address */ + + /* copy .text section and flush the cache along the way */ + lda.w r8, _text + lda.w r9, _etext + sub lr, r10, r8 /* relocation offset */ + +1: ldm r8++, r0-r3 + stm r10, r0-r3 + sub r10, -16 + ldm r8++, r0-r3 + stm r10, r0-r3 + sub r10, -16 + cp.w r8, r9 + cache r10[-4], 0x0d /* dcache clean/invalidate */ + cache r10[-4], 0x01 /* icache invalidate */ + brlt 1b + + /* flush write buffer */ + sync 0 + + /* copy data sections */ + lda.w r9, _edata +1: ld.d r0, r8++ + st.d r10++, r0 + cp.w r8, r9 + brlt 1b + + /* zero out .bss */ + mov r0, 0 + mov r1, 0 + lda.w r9, _end + sub r9, r8 +1: st.d r10++, r0 + sub r9, 8 + brgt 1b + + /* jump to RAM */ + sub r0, pc, . - in_ram + add pc, r0, lr + + .align 2 +in_ram: + /* find the new GOT and relocate it */ + lddpc r6, got_init_reloc +3: rsub r6, pc + mov r8, r6 + lda.w r9, _egot + lda.w r10, _got + sub r9, r10 +1: ld.w r0, r8[0] + add r0, lr + st.w r8++, r0 + sub r9, 4 + brgt 1b + + /* Move the exception handlers */ + mfsr r2, SYSREG_EVBA + add r2, lr + mtsr SYSREG_EVBA, r2 + + /* Do the rest of the initialization sequence */ + call board_init_r + + .align 2 +got_init_reloc: + .long 3b - _GLOBAL_OFFSET_TABLE_ diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile index 90018f3f5..dd4f299ac 100644 --- a/cpu/bf533/Makefile +++ b/cpu/bf533/Makefile @@ -1,6 +1,6 @@ # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h index 0a04f3e8c..25b96a9f6 100644 --- a/cpu/bf533/bf533_serial.h +++ b/cpu/bf533/bf533_serial.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_serial.h Serial Driver defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _Bf533_SERIAL_H diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk index 10817d9ea..6a713c3f5 100644 --- a/cpu/bf533/config.mk +++ b/cpu/bf533/config.mk @@ -1,6 +1,6 @@ # U-boot - config.mk # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # PLATFORM_RELFLAGS += -mcpu=bf533 -ffixed-P5 diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c index ac8ec517f..8118861f8 100644 --- a/cpu/bf533/cpu.c +++ b/cpu/bf533/cpu.c @@ -1,7 +1,7 @@ /* * U-boot - cpu.c CPU specific functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -93,7 +93,7 @@ void icache_enable(void) /* Fill the rest with invalid entry */ if (j <= 15) { - for (; j <= 16; j++) { + for (; j < 16; j++) { debug("filling %i with 0", j); *I1++ = 0x0; } @@ -169,7 +169,7 @@ void dcache_enable(void) /* Fill the rest with invalid entry */ if (j <= 15) { - for (; j <= 16; j++) { + for (; j < 16; j++) { debug("filling %i with 0", j); *I1++ = 0x0; } diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h index 821363e76..b6b73b1d8 100644 --- a/cpu/bf533/cpu.h +++ b/cpu/bf533/cpu.h @@ -1,7 +1,7 @@ /* * U-boot - cpu.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _CPU_H_ diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S index 0512f3bf9..62e3d65ae 100644 --- a/cpu/bf533/flush.S +++ b/cpu/bf533/flush.S @@ -1,9 +1,9 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * Copyright (C) 2004 LG SOft India. All Rights Reserved. +/* Copyright (C) 2003-2007 Analog Devices Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. */ + #define ASSEMBLY #include <asm/linkage.h> diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S index 524da8f51..c356d53aa 100644 --- a/cpu/bf533/interrupt.S +++ b/cpu/bf533/interrupt.S @@ -1,7 +1,7 @@ /* * U-boot - interrupt.S Processing of interrupts and exception handling * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,8 +35,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c index 9317f26d9..14d06cf8d 100644 --- a/cpu/bf533/interrupts.c +++ b/cpu/bf533/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -30,8 +30,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c index f476f1434..55866896a 100644 --- a/cpu/bf533/ints.c +++ b/cpu/bf533/ints.c @@ -1,7 +1,7 @@ /* * U-boot - ints.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on ints.c * @@ -32,8 +32,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c index 11a46be96..6cab5daac 100644 --- a/cpu/bf533/serial.c +++ b/cpu/bf533/serial.c @@ -1,7 +1,7 @@ /* * U-boot - serial.c Serial driver for BF533 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S index 94556d681..67a60cf21 100644 --- a/cpu/bf533/start.S +++ b/cpu/bf533/start.S @@ -1,7 +1,7 @@ /* * U-boot - start.S Startup file of u-boot for BF533/BF561 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on head.S * Copyright (c) 2003 Metrowerks/Motorola @@ -26,8 +26,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S index 72cfafb5e..6d4731b69 100644 --- a/cpu/bf533/start1.S +++ b/cpu/bf533/start1.S @@ -1,7 +1,7 @@ /* * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c index 248e34f3f..19b1fde41 100644 --- a/cpu/bf533/traps.c +++ b/cpu/bf533/traps.c @@ -1,7 +1,7 @@ /* * U-boot - traps.c Routines related to interrupts and exceptions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * No original Copyright holder listed, @@ -29,8 +29,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -39,7 +39,6 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/traps.h> -#include <asm/page.h> #include <asm/machdep.h> #include "cpu.h" #include <asm/arch/anomaly.h> diff --git a/cpu/bf537/Makefile b/cpu/bf537/Makefile index 61c733886..8b0f9c0e9 100644 --- a/cpu/bf537/Makefile +++ b/cpu/bf537/Makefile @@ -1,6 +1,6 @@ # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/cpu/bf537/config.mk b/cpu/bf537/config.mk index 4d57d9c9a..8a35789f1 100644 --- a/cpu/bf537/config.mk +++ b/cpu/bf537/config.mk @@ -1,6 +1,6 @@ # U-boot - config.mk # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # PLATFORM_RELFLAGS += -mcpu=bf537 -ffixed-P5 diff --git a/cpu/bf537/cpu.c b/cpu/bf537/cpu.c index cb8dc3cd1..62f603bdb 100644 --- a/cpu/bf537/cpu.c +++ b/cpu/bf537/cpu.c @@ -1,7 +1,7 @@ /* * U-boot - cpu.c CPU specific functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/cpu.h b/cpu/bf537/cpu.h index 821363e76..b6b73b1d8 100644 --- a/cpu/bf537/cpu.h +++ b/cpu/bf537/cpu.h @@ -1,7 +1,7 @@ /* * U-boot - cpu.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _CPU_H_ diff --git a/cpu/bf537/flush.S b/cpu/bf537/flush.S index c260a8f96..fbd26cc92 100644 --- a/cpu/bf537/flush.S +++ b/cpu/bf537/flush.S @@ -1,9 +1,9 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * Copyright (C) 2004 LG SOft India. All Rights Reserved. +/* Copyright (C) 2003-2007 Analog Devices Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. */ + #define ASSEMBLY #include <asm/linkage.h> diff --git a/cpu/bf537/interrupt.S b/cpu/bf537/interrupt.S index a8be34f02..a71df55a9 100644 --- a/cpu/bf537/interrupt.S +++ b/cpu/bf537/interrupt.S @@ -1,7 +1,7 @@ /* * U-boot - interrupt.S Processing of interrupts and exception handling * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,8 +35,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf537/interrupts.c b/cpu/bf537/interrupts.c index 2ca76ecb3..d2213b115 100644 --- a/cpu/bf537/interrupts.c +++ b/cpu/bf537/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -30,8 +30,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/ints.c b/cpu/bf537/ints.c index f476f1434..55866896a 100644 --- a/cpu/bf537/ints.c +++ b/cpu/bf537/ints.c @@ -1,7 +1,7 @@ /* * U-boot - ints.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on ints.c * @@ -32,8 +32,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c index dd4f916d5..e04d08a0e 100644 --- a/cpu/bf537/serial.c +++ b/cpu/bf537/serial.c @@ -1,7 +1,7 @@ /* * U-boot - serial.c Serial driver for BF537 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf537_serial.c: Serial driver for BlackFin BF537 internal UART. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/serial.h b/cpu/bf537/serial.h index c9ee3dc06..76555c279 100644 --- a/cpu/bf537/serial.h +++ b/cpu/bf537/serial.h @@ -1,7 +1,7 @@ /* * U-boot - bf537_serial.h Serial Driver defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _Bf537_SERIAL_H diff --git a/cpu/bf537/start.S b/cpu/bf537/start.S index 264e9b608..4e02bcb9e 100644 --- a/cpu/bf537/start.S +++ b/cpu/bf537/start.S @@ -1,7 +1,7 @@ /* * U-boot - start.S Startup file of u-boot for BF537 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on head.S * Copyright (c) 2003 Metrowerks/Motorola @@ -26,8 +26,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/cpu/bf537/start1.S b/cpu/bf537/start1.S index 72cfafb5e..6d4731b69 100644 --- a/cpu/bf537/start1.S +++ b/cpu/bf537/start1.S @@ -1,7 +1,7 @@ /* * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf537/traps.c b/cpu/bf537/traps.c index 994ece8f6..4e18e27df 100644 --- a/cpu/bf537/traps.c +++ b/cpu/bf537/traps.c @@ -1,7 +1,7 @@ /* * U-boot - traps.c Routines related to interrupts and exceptions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * No original Copyright holder listed, @@ -29,8 +29,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -39,7 +39,6 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/traps.h> -#include <asm/page.h> #include <asm/machdep.h> #include "cpu.h" #include <asm/arch/anomaly.h> diff --git a/cpu/bf561/Makefile b/cpu/bf561/Makefile index ee7842a5d..29471694d 100644 --- a/cpu/bf561/Makefile +++ b/cpu/bf561/Makefile @@ -1,6 +1,6 @@ # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk index c49a0ba5f..f4dc04bfc 100644 --- a/cpu/bf561/config.mk +++ b/cpu/bf561/config.mk @@ -1,6 +1,6 @@ # U-boot - config.mk # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5 diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c index a7b53d8a2..5b907cd1e 100644 --- a/cpu/bf561/cpu.c +++ b/cpu/bf561/cpu.c @@ -1,7 +1,7 @@ /* * U-boot - cpu.c CPU specific functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h index 821363e76..b6b73b1d8 100644 --- a/cpu/bf561/cpu.h +++ b/cpu/bf561/cpu.h @@ -1,7 +1,7 @@ /* * U-boot - cpu.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _CPU_H_ diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S index 7e12c8305..0140a60c4 100644 --- a/cpu/bf561/flush.S +++ b/cpu/bf561/flush.S @@ -1,9 +1,9 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * Copyright (C) 2004 LG SOft India. All Rights Reserved. +/* Copyright (C) 2003-2007 Analog Devices Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. */ + #define ASSEMBLY #include <asm/linkage.h> diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S index f82fd9b82..21839ce7d 100644 --- a/cpu/bf561/interrupt.S +++ b/cpu/bf561/interrupt.S @@ -1,7 +1,7 @@ /* * U-boot - interrupt.S Processing of interrupts and exception handling * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,8 +35,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf561/interrupts.c b/cpu/bf561/interrupts.c index e314f60d2..ecbc6addf 100644 --- a/cpu/bf561/interrupts.c +++ b/cpu/bf561/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -30,8 +30,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c index 328e5d8ef..27a38a349 100644 --- a/cpu/bf561/ints.c +++ b/cpu/bf561/ints.c @@ -1,7 +1,7 @@ /* * U-boot - ints.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on ints.c * @@ -32,8 +32,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c index baec1d3e4..7f5c69536 100644 --- a/cpu/bf561/serial.c +++ b/cpu/bf561/serial.c @@ -1,7 +1,7 @@ /* * U-boot - serial.c Serial driver for BF561 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h index 98c1242a3..c1cbf36ac 100644 --- a/cpu/bf561/serial.h +++ b/cpu/bf561/serial.h @@ -1,7 +1,7 @@ /* * U-boot - bf561_serial.h Serial Driver defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _Bf561_SERIAL_H diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S index 933364804..bd26cf32f 100644 --- a/cpu/bf561/start.S +++ b/cpu/bf561/start.S @@ -1,7 +1,7 @@ /* * U-boot - start.S Startup file of u-boot for BF533/BF561 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on head.S * Copyright (c) 2003 Metrowerks/Motorola @@ -26,8 +26,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/cpu/bf561/start1.S b/cpu/bf561/start1.S index 72cfafb5e..6d4731b69 100644 --- a/cpu/bf561/start1.S +++ b/cpu/bf561/start1.S @@ -1,7 +1,7 @@ /* * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c index f5ff3a807..7e2dcd17a 100644 --- a/cpu/bf561/traps.c +++ b/cpu/bf561/traps.c @@ -1,7 +1,7 @@ /* * U-boot - traps.c Routines related to interrupts and exceptions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * No original Copyright holder listed, @@ -29,8 +29,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile index fd544254f..db1afa553 100644 --- a/cpu/microblaze/Makefile +++ b/cpu/microblaze/Makefile @@ -26,7 +26,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = cpu.o interrupts.o +SOBJS = dcache.o icache.o irq.o disable_int.o enable_int.o +COBJS = cpu.o interrupts.o cache.o exception.o timer.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c new file mode 100644 index 000000000..fc388ebb5 --- /dev/null +++ b/cpu/microblaze/cache.c @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <moonstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + +int dcache_status (void) +{ + int i = 0; + int mask = 0x80; + __asm__ __volatile__ ("mfs %0,rmsr"::"r" (i):"memory"); + /* i&=0x80 */ + __asm__ __volatile__ ("and %0,%0,%1"::"r" (i), "r" (mask):"memory"); + return i; +} + +int icache_status (void) +{ + int i = 0; + int mask = 0x20; + __asm__ __volatile__ ("mfs %0,rmsr"::"r" (i):"memory"); + /* i&=0x20 */ + __asm__ __volatile__ ("and %0,%0,%1"::"r" (i), "r" (mask):"memory"); + return i; +} +#endif diff --git a/cpu/microblaze/dcache.S b/cpu/microblaze/dcache.S new file mode 100644 index 000000000..eaf96717e --- /dev/null +++ b/cpu/microblaze/dcache.S @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + .text + .globl dcache_enable + .ent dcache_enable + .align 2 +dcache_enable: + /* Make space on stack for a temporary */ + addi r1, r1, -4 + /* Save register r12 */ + swi r12, r1, 0 + /* Read the MSR register */ + mfs r12, rmsr + /* Set the instruction enable bit */ + ori r12, r12, 0x80 + /* Save the MSR register */ + mts rmsr, r12 + /* Load register r12 */ + lwi r12, r1, 0 + /* Return */ + rtsd r15, 8 + /* Update stack in the delay slot */ + addi r1, r1, 4 + .end dcache_enable + + .text + .globl dcache_disable + .ent dcache_disable + .align 2 +dcache_disable: + /* Make space on stack for a temporary */ + addi r1, r1, -4 + /* Save register r12 */ + swi r12, r1, 0 + /* Read the MSR register */ + mfs r12, rmsr + /* Clear the data cache enable bit */ + andi r12, r12, ~0x80 + /* Save the MSR register */ + mts rmsr, r12 + /* Load register r12 */ + lwi r12, r1, 0 + /* Return */ + rtsd r15, 8 + /* Update stack in the delay slot */ + addi r1, r1, 4 + .end dcache_disable diff --git a/cpu/microblaze/disable_int.S b/cpu/microblaze/disable_int.S new file mode 100644 index 000000000..aecd79513 --- /dev/null +++ b/cpu/microblaze/disable_int.S @@ -0,0 +1,46 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + .text + .globl microblaze_disable_interrupts + .ent microblaze_disable_interrupts + .align 2 +microblaze_disable_interrupts: + #Make space on stack for a temporary + addi r1, r1, -4 + #Save register r12 + swi r12, r1, 0 + #Read the MSR register + mfs r12, rmsr + #Clear the interrupt enable bit + andi r12, r12, ~2 + #Save the MSR register + mts rmsr, r12 + #Load register r12 + lwi r12, r1, 0 + #Return + rtsd r15, 8 + #Update stack in the delay slot + addi r1, r1, 4 + .end microblaze_disable_interrupts diff --git a/include/asm-microblaze/platform.h b/cpu/microblaze/enable_int.S index 2096cce45..c096c6c3c 100644 --- a/include/asm-microblaze/platform.h +++ b/cpu/microblaze/enable_int.S @@ -1,7 +1,7 @@ /* - * (C) Copyright 2004 Atmark Techno, Inc. + * (C) Copyright 2007 Michal Simek * - * Yasushi SHOJI <yashi@atmark-techno.com> + * Michal SIMEK <monstrmonstr.eu> * * See file CREDITS for list of people who contributed to this * project. @@ -13,7 +13,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -22,8 +22,17 @@ * MA 02111-1307 USA */ -#include <config.h> - -#ifdef CONFIG_SUZAKU -#include <asm/suzaku.h> -#endif + .text + .globl microblaze_enable_interrupts + .ent microblaze_enable_interrupts + .align 2 +microblaze_enable_interrupts: + addi r1, r1, -4 + swi r12, r1, 0 + mfs r12, rmsr + ori r12, r12, 2 + mts rmsr, r12 + lwi r12, r1, 0 + rtsd r15, 8 + addi r1, r1, 4 + .end microblaze_enable_interrupts diff --git a/cpu/microblaze/exception.c b/cpu/microblaze/exception.c new file mode 100644 index 000000000..b135acbad --- /dev/null +++ b/cpu/microblaze/exception.c @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +void _hw_exception_handler (void) +{ + int address = 0; + int state = 0; + /* loading address of exception EAR */ + __asm__ __volatile ("mfs %0,rear"::"r" (address):"memory"); + /* loading excetpion state register ESR */ + __asm__ __volatile ("mfs %0,resr"::"r" (state):"memory"); + printf ("Hardware exception at 0x%x address\n", address); + switch (state & 0x1f) { /* mask on exception cause */ + case 0x1: + puts ("Unaligned data access exception\n"); + break; + case 0x2: + puts ("Illegal op-code exception\n"); + break; + case 0x3: + puts ("Instruction bus error exception\n"); + break; + case 0x4: + puts ("Data bus error exception\n"); + break; + case 0x5: + puts ("Divide by zero exception\n"); + break; + default: + puts ("Undefined cause\n"); + break; + } + printf ("Unaligned %sword access\n", ((state & 0x800) ? "" : "half")); + printf ("Unaligned %s access\n", ((state & 0x400) ? "store" : "load")); + printf ("Register R%x\n", (state & 0x3E) >> 5); + hang (); +} + +#ifdef CFG_USR_EXCEP +void _exception_handler (void) +{ + puts ("User vector_exception\n"); + hang (); +} +#endif diff --git a/cpu/microblaze/icache.S b/cpu/microblaze/icache.S new file mode 100644 index 000000000..25940d106 --- /dev/null +++ b/cpu/microblaze/icache.S @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + .text + .globl icache_enable + .ent icache_enable + .align 2 +icache_enable: + /* Make space on stack for a temporary */ + addi r1, r1, -4 + /* Save register r12 */ + swi r12, r1, 0 + /* Read the MSR register */ + mfs r12, rmsr + /* Set the instruction enable bit */ + ori r12, r12, 0x20 + /* Save the MSR register */ + mts rmsr, r12 + /* Load register r12 */ + lwi r12, r1, 0 + /* Return */ + rtsd r15, 8 + /* Update stack in the delay slot */ + addi r1, r1, 4 + .end icache_enable + + .text + .globl icache_disable + .ent icache_disable + .align 2 +icache_disable: + /* Make space on stack for a temporary */ + addi r1, r1, -4 + /* Save register r12 */ + swi r12, r1, 0 + /* Read the MSR register */ + mfs r12, rmsr + /* Clear the instruction enable bit */ + andi r12, r12, ~0x20 + /* Save the MSR register */ + mts rmsr, r12 + /* Load register r12 */ + lwi r12, r1, 0 + /* Return */ + rtsd r15, 8 + /* Update stack in the delay slot */ + addi r1, r1, 4 + .end icache_disable diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c index ccf67e172..2db847cd0 100644 --- a/cpu/microblaze/interrupts.c +++ b/cpu/microblaze/interrupts.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK <monstr@monstr.eu> * Yasushi SHOJI <yashi@atmark-techno.com> * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -22,11 +24,185 @@ * MA 02111-1307 USA */ -void enable_interrupts(void) +#include <common.h> +#include <command.h> +#include <asm/microblaze_intc.h> + +#undef DEBUG_INT + +extern void microblaze_disable_interrupts (void); +extern void microblaze_enable_interrupts (void); + +void enable_interrupts (void) { + microblaze_enable_interrupts (); } -int disable_interrupts(void) +int disable_interrupts (void) { + microblaze_disable_interrupts (); return 0; } + +#ifdef CFG_INTC_0 +#ifdef CFG_TIMER_0 +extern void timer_init (void); +#endif + +static struct irq_action vecs[CFG_INTC_0_NUM]; + +/* mapping structure to interrupt controller */ +microblaze_intc_t *intc = (microblaze_intc_t *) (CFG_INTC_0_ADDR); + +/* default handler */ +void def_hdlr (void) +{ + puts ("def_hdlr\n"); +} + +void enable_one_interrupt (int irq) +{ + int mask; + int offset = 1; + offset <<= irq; + mask = intc->ier; + intc->ier = (mask | offset); +#ifdef DEBUG_INT + printf ("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask, + intc->ier); + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); +#endif +} + +void disable_one_interrupt (int irq) +{ + int mask; + int offset = 1; + offset <<= irq; + mask = intc->ier; + intc->ier = (mask & ~offset); +#ifdef DEBUG_INT + printf ("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask, + intc->ier); + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); +#endif +} + +/* adding new handler for interrupt */ +void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, void *arg) +{ + struct irq_action *act; + /* irq out of range */ + if ((irq < 0) || (irq > CFG_INTC_0_NUM)) { + puts ("IRQ out of range\n"); + return; + } + act = &vecs[irq]; + if (hdlr) { /* enable */ + act->handler = hdlr; + act->arg = arg; + act->count = 0; + enable_one_interrupt (irq); + } else { /* disable */ + + act->handler = (interrupt_handler_t *) def_hdlr; + act->arg = (void *)irq; + disable_one_interrupt (irq); + } +} + +/* initialization interrupt controller - hardware */ +void intc_init (void) +{ + intc->mer = 0; + intc->ier = 0; + intc->iar = 0xFFFFFFFF; + /* XIntc_Start - hw_interrupt enable and all interrupt enable */ + intc->mer = 0x3; +#ifdef DEBUG_INT + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); +#endif +} + +int interrupts_init (void) +{ + int i; + /* initialize irq list */ + for (i = 0; i < CFG_INTC_0_NUM; i++) { + vecs[i].handler = (interrupt_handler_t *) def_hdlr; + vecs[i].arg = (void *)i; + vecs[i].count = 0; + } + /* initialize intc controller */ + intc_init (); +#ifdef CFG_TIMER_0 + timer_init (); +#endif + enable_interrupts (); + return 0; +} + +void interrupt_handler (void) +{ + int irqs; + irqs = (intc->isr & intc->ier); /* find active interrupt */ + +#ifdef DEBUG_INT + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); + printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); +#endif + struct irq_action *act = vecs; + while (irqs) { + if (irqs & 1) { +#ifdef DEBUG_INT + printf + ("Jumping to interrupt handler rutine addr %x,count %x,arg %x\n", + act->handler, act->count, act->arg); +#endif + act->handler (act->arg); + act->count++; + } + irqs >>= 1; + act++; + } + intc->iar = 0xFFFFFFFF; /* erase all events */ +#ifdef DEBUG + printf ("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr, + intc->ier, intc->iar, intc->mer); + printf ("Interrupt handler on %x line, r14\n", irqs); +#endif +} +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_IRQ) +#ifdef CFG_INTC_0 +int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int i; + struct irq_action *act = vecs; + + puts ("\nInterrupt-Information:\n\n" + "Nr Routine Arg Count\n" + "-----------------------------\n"); + + for (i = 0; i < CFG_INTC_0_NUM; i++) { + if (act->handler != (interrupt_handler_t*) def_hdlr) { + printf ("%02d %08lx %08lx %d\n", i, + (int)act->handler, (int)act->arg, act->count); + } + act++; + } + puts ("\n"); + return (0); +} +#else +int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + puts ("Undefined interrupt controller\n"); +} +#endif +#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */ diff --git a/cpu/microblaze/irq.S b/cpu/microblaze/irq.S new file mode 100644 index 000000000..a4e3fbfad --- /dev/null +++ b/cpu/microblaze/irq.S @@ -0,0 +1,165 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + .text + .global _interrupt_handler +_interrupt_handler: + addi r1, r1, -4 + swi r2, r1, 0 + addi r1, r1, -4 + swi r3, r1, 0 + addi r1, r1, -4 + swi r4, r1, 0 + addi r1, r1, -4 + swi r5, r1, 0 + addi r1, r1, -4 + swi r6, r1, 0 + addi r1, r1, -4 + swi r7, r1, 0 + addi r1, r1, -4 + swi r8, r1, 0 + addi r1, r1, -4 + swi r9, r1, 0 + addi r1, r1, -4 + swi r10, r1, 0 + addi r1, r1, -4 + swi r11, r1, 0 + addi r1, r1, -4 + swi r12, r1, 0 + addi r1, r1, -4 + swi r13, r1, 0 + addi r1, r1, -4 + swi r14, r1, 0 + addi r1, r1, -4 + swi r15, r1, 0 + addi r1, r1, -4 + swi r16, r1, 0 + addi r1, r1, -4 + swi r17, r1, 0 + addi r1, r1, -4 + swi r18, r1, 0 + addi r1, r1, -4 + swi r19, r1, 0 + addi r1, r1, -4 + swi r20, r1, 0 + addi r1, r1, -4 + swi r21, r1, 0 + addi r1, r1, -4 + swi r22, r1, 0 + addi r1, r1, -4 + swi r23, r1, 0 + addi r1, r1, -4 + swi r24, r1, 0 + addi r1, r1, -4 + swi r25, r1, 0 + addi r1, r1, -4 + swi r26, r1, 0 + addi r1, r1, -4 + swi r27, r1, 0 + addi r1, r1, -4 + swi r28, r1, 0 + addi r1, r1, -4 + swi r29, r1, 0 + addi r1, r1, -4 + swi r30, r1, 0 + addi r1, r1, -4 + swi r31, r1, 0 + brlid r15, interrupt_handler + nop + nop + lwi r31, r1, 0 + addi r1, r1, 4 + lwi r30, r1, 0 + addi r1, r1, 4 + lwi r29, r1, 0 + addi r1, r1, 4 + lwi r28, r1, 0 + addi r1, r1, 4 + lwi r27, r1, 0 + addi r1, r1, 4 + lwi r26, r1, 0 + addi r1, r1, 4 + lwi r25, r1, 0 + addi r1, r1, 4 + lwi r24, r1, 0 + addi r1, r1, 4 + lwi r23, r1, 0 + addi r1, r1, 4 + lwi r22, r1, 0 + addi r1, r1, 4 + lwi r21, r1, 0 + addi r1, r1, 4 + lwi r20, r1, 0 + addi r1, r1, 4 + lwi r19, r1, 0 + addi r1, r1, 4 + lwi r18, r1, 0 + addi r1, r1, 4 + lwi r17, r1, 0 + addi r1, r1, 4 + lwi r16, r1, 0 + addi r1, r1, 4 + lwi r15, r1, 0 + addi r1, r1, 4 + lwi r14, r1, 0 + addi r1, r1, 4 + lwi r13, r1, 0 + addi r1, r1, 4 + lwi r12, r1, 0 + addi r1, r1, 4 + lwi r11, r1, 0 + addi r1, r1, 4 + lwi r10, r1, 0 + addi r1, r1, 4 + lwi r9, r1, 0 + addi r1, r1, 4 + lwi r8, r1, 0 + addi r1, r1, 4 + lwi r7, r1, 0 + addi r1, r1, 4 + lwi r6, r1, 0 + addi r1, r1, 4 + lwi r5, r1, 0 + addi r1, r1, 4 + lwi r4, r1, 0 + addi r1, r1, 4 + lwi r3, r1, 0 + addi r1, r1, 4 + lwi r2, r1, 0 + addi r1, r1, 4 + + /* enable_interrupt */ + addi r1, r1, -4 + swi r12, r1, 0 + mfs r12, rmsr + ori r12, r12, 2 + mts rmsr, r12 + lwi r12, r1, 0 + addi r1, r1, 4 + nop + bra r14 + nop + nop + .size _interrupt_handler,.-_interrupt_handler diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S index 7efdbb097..ca3befc24 100644 --- a/cpu/microblaze/start.S +++ b/cpu/microblaze/start.S @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK <monstr@monstr.eu> * Yasushi SHOJI <yashi@atmark-techno.com> * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -27,10 +29,91 @@ .text .global _start _start: + mts rmsr, r0 /* disable cache */ + addi r1, r0, CFG_INIT_SP_OFFSET + addi r1, r1, -4 /* Decrement SP to top of memory */ + /* add opcode instruction for 32bit jump - 2 instruction imm & brai*/ + addi r6, r0, 0xb000 /* hex b000 opcode imm */ + bslli r6, r6, 16 /* shift */ + swi r6, r0, 0x0 /* reset address */ + swi r6, r0, 0x8 /* user vector exception */ + swi r6, r0, 0x10 /* interrupt */ + swi r6, r0, 0x20 /* hardware exception */ - addi r1, r0, CFG_SDRAM_BASE /* init stack pointer */ - addi r1, r1, CFG_SDRAM_SIZE /* set sp to high up */ + addi r6, r0, 0xb808 /* hew b808 opcode brai*/ + bslli r6, r6, 16 + swi r6, r0, 0x4 /* reset address */ + swi r6, r0, 0xC /* user vector exception */ + swi r6, r0, 0x14 /* interrupt */ + swi r6, r0, 0x24 /* hardware exception */ - brai board_init +#ifdef CFG_RESET_ADDRESS + /* reset address */ + addik r6, r0, CFG_RESET_ADDRESS + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0x2 + shi r6, r0, 0x6 +/* + * Copy U-Boot code to TEXT_BASE + * solve problem with sbrk_base + */ +#if (CFG_RESET_ADDRESS != TEXT_BASE) + addi r4, r0, __end + addi r5, r0, __text_start + rsub r4, r5, r4 /* size = __end - __text_start */ + addi r6, r0, CFG_RESET_ADDRESS /* source address */ + addi r7, r0, 0 /* counter */ +4: + lw r8, r6, r7 + sw r8, r5, r7 + addi r7, r7, 0x4 + cmp r8, r4, r7 + blti r8, 4b +#endif +#endif + +#ifdef CFG_USR_EXCEP + /* user_vector_exception */ + addik r6, r0, _exception_handler + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0xa + shi r6, r0, 0xe +#endif +#ifdef CFG_INTC_0 + /* interrupt_handler */ + addik r6, r0, _interrupt_handler + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0x12 + shi r6, r0, 0x16 +#endif + + /* hardware exception */ + addik r6, r0, _hw_exception_handler + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0x22 + shi r6, r0, 0x26 + + /* enable instruction and data cache */ + mfs r12, rmsr + ori r12, r12, 0xa0 + mts rmsr, r12 + +clear_bss: + /* clear BSS segments */ + addi r5, r0, __bss_start + addi r4, r0, __bss_end + cmp r6, r5, r4 + beqi r6, 3f +2: + swi r0, r5, 0 /* write zero to loc */ + addi r5, r5, 4 /* increment to next loc */ + cmp r6, r5, r4 /* check if we have reach the end */ + bnei r6, 2b +3: /* jumping to board_init */ + brai board_init 1: bri 1b diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c new file mode 100644 index 000000000..be4fd57cc --- /dev/null +++ b/cpu/microblaze/timer.c @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/microblaze_timer.h> + +volatile int timestamp = 0; + +void reset_timer (void) +{ + timestamp = 0; +} + +ulong get_timer (ulong base) +{ + return (timestamp - base); +} + +void set_timer (ulong t) +{ + timestamp = t; +} + +#ifdef CFG_INTC_0 +#ifdef CFG_TIMER_0 +extern void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, + void *arg); + +microblaze_timer_t *tmr = (microblaze_timer_t *) (CFG_TIMER_0_ADDR); + +void timer_isr (void *arg) +{ + timestamp++; + tmr->control = tmr->control | TIMER_INTERRUPT; +} + +void timer_init (void) +{ + tmr->loadreg = CFG_TIMER_0_PRELOAD; + tmr->control = TIMER_INTERRUPT | TIMER_RESET; + tmr->control = + TIMER_ENABLE | TIMER_ENABLE_INTR | TIMER_RELOAD | TIMER_DOWN_COUNT; + reset_timer (); + install_interrupt_handler (CFG_TIMER_0_IRQ, timer_isr, (void *)tmr); +} +#endif +#endif diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 13a3870f3..e59bd85e1 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -467,6 +467,10 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) miiphy_write(dev->name, phyAddr, 0x0, 0x8000); udelay(1000); +#if defined(CONFIG_UC101) + /* Set the LED configuration Register for the UC101 Board */ + miiphy_write(dev->name, phyAddr, 0x14, 0x4122); +#endif if (fec->xcv_type == MII10) { /* * Force 10Base-T, FDX operation diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index e4bc4052d..21b16463c 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -30,8 +30,14 @@ #include <watchdog.h> #include <command.h> #include <mpc83xx.h> -#include <ft_build.h> #include <asm/processor.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#endif +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#include <libfdt_env.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -291,6 +297,100 @@ void watchdog_reset (void) } #endif +#if defined(CONFIG_OF_LIBFDT) + +/* + * Fixups to the fdt. If "create" is TRUE, the node is created + * unconditionally. If "create" is FALSE, the node is updated + * only if it already exists. + */ +#define FT_UPDATE 0x00000000 /* update existing property only */ +#define FT_CREATE 0x00000001 /* create property if it doesn't exist */ +#define FT_BUSFREQ 0x00000002 /* source is bd->bi_busfreq */ +#define FT_ENETADDR 0x00000004 /* source is bd->bi_enetaddr */ +static const struct { + int createflags; + char *node; + char *prop; +} fixup_props[] = { + { FT_CREATE | FT_BUSFREQ, + "/cpus/" OF_CPU, + "bus-frequency", + }, + { FT_CREATE | FT_BUSFREQ, + "/cpus/" OF_SOC, + "bus-frequency" + }, + { FT_CREATE | FT_BUSFREQ, + "/" OF_SOC "/serial@4500/", + "clock-frequency" + }, + { FT_CREATE | FT_BUSFREQ, + "/" OF_SOC "/serial@4600/", + "clock-frequency" + }, +#ifdef CONFIG_MPC83XX_TSEC1 + { FT_UPDATE | FT_ENETADDR, + "/" OF_SOC "/ethernet@24000, + "mac-address", + }, + { FT_UPDATE | FT_ENETADDR, + "/" OF_SOC "/ethernet@24000, + "local-mac-address", + }, +#endif +#ifdef CONFIG_MPC83XX_TSEC2 + { FT_UPDATE | FT_ENETADDR, + "/" OF_SOC "/ethernet@25000, + "mac-address", + }, + { FT_UPDATE | FT_ENETADDR, + "/" OF_SOC "/ethernet@25000, + "local-mac-address", + }, +#endif +}; + +void +ft_cpu_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int j; + + for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) { + nodeoffset = fdt_path_offset (fdt, fixup_props[j].node); + if (nodeoffset >= 0) { + /* + * If unconditional create or the property already exists... + */ + if ((fixup_props[j].createflags & FT_CREATE) || + (fdt_get_property(fdt, nodeoffset, fixup_props[j].prop, 0))) { + if (fixup_props[j].createflags & FT_BUSFREQ) { + u32 tmp; + + tmp = cpu_to_be32(bd->bi_busfreq); + err = fdt_setprop(fdt, nodeoffset, + fixup_props[j].prop, &tmp, sizeof(tmp)); + } else if (fixup_props[j].createflags & FT_ENETADDR) { + err = fdt_setprop(fdt, nodeoffset, + fixup_props[j].prop, bd->bi_enetaddr, 6); + } else { + printf("ft_cpu_setup: %s %s has no flag for the value to set\n", + fixup_props[j].node, + fixup_props[j].prop); + } + if (err < 0) + printf("libfdt: %s %s returned %s\n", + fixup_props[j].node, + fixup_props[j].prop, + fdt_strerror(err)); + } + } + } +} +#endif + #if defined(CONFIG_OF_FLAT_TREE) void ft_cpu_setup(void *blob, bd_t *bd) diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 83c991116..2ecd3e4b6 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -107,10 +107,11 @@ #define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n)) /* Defines for the Read Cycle Delay test */ -#define NUMMEMTESTS 8 -#define NUMMEMWORDS 8 +#define NUMMEMTESTS 8 +#define NUMMEMWORDS 8 +#define NUMLOOPS 256 /* memory test loops */ -#define CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */ +#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */ /* * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory @@ -584,10 +585,23 @@ static void get_spd_info(unsigned long *dimm_populated, #ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { + PPC440_SYS_INFO board_cfg; + u32 val; + if (is_ecc_enabled()) - puts(" (ECC enabled)"); + puts(" (ECC"); else - puts(" (ECC not enabled)"); + puts(" (ECC not"); + + get_sys_info(&board_cfg); + + mfsdr(SDR0_DDR0, val); + val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1); + printf(" enabled, %d MHz", (val * 2) / 1000000); + + mfsdram(SDRAM_MMODE, val); + val = (val & SDRAM_MMODE_DCL_MASK) >> 4; + printf(", CL%d)", val); } #endif @@ -731,6 +745,7 @@ static void check_frequency(unsigned long *dimm_populated, else cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + ((tcyc_reg & 0x0F)*10); + debug("cycle_time=%d [10 picoseconds]\n", cycle_time); if (cycle_time > (calc_cycle_time + 10)) { /* @@ -1109,7 +1124,7 @@ static void program_codt(unsigned long *dimm_populated, modt3 = 0x00000000; } } - } else { + } else { codt |= SDRAM_CODT_DQS_2_5_V_DDR1; modt0 = 0x00000000; modt1 = 0x00000000; @@ -1315,6 +1330,7 @@ static void program_mode(unsigned long *dimm_populated, mfsdr(SDR0_DDR0, sdr_ddrpll); sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1); + debug("sdram_freq=%d\n", sdram_freq); /*------------------------------------------------------------------ * Handle the timing. We need to find the worst case timing of all @@ -1344,6 +1360,7 @@ static void program_mode(unsigned long *dimm_populated, /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18); + debug("cas_bit[SPD byte 18]=%02x\n", cas_bit); /* For a particular DIMM, grab the three CAS values it supports */ for (cas_index = 0; cas_index < 3; cas_index++) { @@ -1362,7 +1379,8 @@ static void program_mode(unsigned long *dimm_populated, if ((tcyc_reg & 0x0F) >= 10) { if ((tcyc_reg & 0x0F) == 0x0D) { /* Convert from hex to decimal */ - cycle_time_ns_x_100[cas_index] = (((tcyc_reg & 0xF0) >> 4) * 100) + 75; + cycle_time_ns_x_100[cas_index] = + (((tcyc_reg & 0xF0) >> 4) * 100) + 75; } else { printf("ERROR: SPD reported Tcyc is incorrect for DIMM " "in slot %d\n", (unsigned int)dimm_num); @@ -1370,9 +1388,12 @@ static void program_mode(unsigned long *dimm_populated, } } else { /* Convert from hex to decimal */ - cycle_time_ns_x_100[cas_index] = (((tcyc_reg & 0xF0) >> 4) * 100) + + cycle_time_ns_x_100[cas_index] = + (((tcyc_reg & 0xF0) >> 4) * 100) + ((tcyc_reg & 0x0F)*10); } + debug("cas_index=%d: cycle_time_ns_x_100=%d\n", cas_index, + cycle_time_ns_x_100[cas_index]); } /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */ @@ -1385,8 +1406,10 @@ static void program_mode(unsigned long *dimm_populated, * Bit 7 6 5 4 3 2 1 0 * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0 */ - if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { - max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) && + (cycle_time_ns_x_100[cas_index] != 0)) { + max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, + cycle_time_ns_x_100[cas_index]); cas_index++; } else { if (cas_index != 0) @@ -1394,8 +1417,10 @@ static void program_mode(unsigned long *dimm_populated, cas_4_0_available = FALSE; } - if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { - max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && + (cycle_time_ns_x_100[cas_index] != 0)) { + max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, + cycle_time_ns_x_100[cas_index]); cas_index++; } else { if (cas_index != 0) @@ -1403,8 +1428,10 @@ static void program_mode(unsigned long *dimm_populated, cas_3_0_available = FALSE; } - if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { - max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && + (cycle_time_ns_x_100[cas_index] != 0)) { + max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100, + cycle_time_ns_x_100[cas_index]); cas_index++; } else { if (cas_index != 0) @@ -1412,8 +1439,10 @@ static void program_mode(unsigned long *dimm_populated, cas_2_5_available = FALSE; } - if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { - max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) && + (cycle_time_ns_x_100[cas_index] != 0)) { + max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100, + cycle_time_ns_x_100[cas_index]); cas_index++; } else { if (cas_index != 0) @@ -1426,8 +1455,10 @@ static void program_mode(unsigned long *dimm_populated, * Bit 7 6 5 4 3 2 1 0 * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD */ - if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { - max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) && + (cycle_time_ns_x_100[cas_index] != 0)) { + max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100, + cycle_time_ns_x_100[cas_index]); cas_index++; } else { if (cas_index != 0) @@ -1435,8 +1466,10 @@ static void program_mode(unsigned long *dimm_populated, cas_5_0_available = FALSE; } - if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { - max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && + (cycle_time_ns_x_100[cas_index] != 0)) { + max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, + cycle_time_ns_x_100[cas_index]); cas_index++; } else { if (cas_index != 0) @@ -1444,8 +1477,10 @@ static void program_mode(unsigned long *dimm_populated, cas_4_0_available = FALSE; } - if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { - max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && + (cycle_time_ns_x_100[cas_index] != 0)) { + max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, + cycle_time_ns_x_100[cas_index]); cas_index++; } else { if (cas_index != 0) @@ -1468,6 +1503,9 @@ static void program_mode(unsigned long *dimm_populated, cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10; cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10; cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10; + debug("cycle_3_0_clk=%d\n", cycle_3_0_clk); + debug("cycle_4_0_clk=%d\n", cycle_4_0_clk); + debug("cycle_5_0_clk=%d\n", cycle_5_0_clk); if (sdram_ddr1 == TRUE) { /* DDR1 */ if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) { @@ -1486,6 +1524,9 @@ static void program_mode(unsigned long *dimm_populated, hang(); } } else { /* DDR2 */ + debug("cas_3_0_available=%d\n", cas_3_0_available); + debug("cas_4_0_available=%d\n", cas_4_0_available); + debug("cas_5_0_available=%d\n", cas_5_0_available); if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) { mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK; *selected_cas = DDR_CAS_3; @@ -2137,6 +2178,18 @@ static unsigned long is_ecc_enabled(void) return ecc; } +static void blank_string(int size) +{ + int i; + + for (i=0; i<size; i++) + putc('\b'); + for (i=0; i<size; i++) + putc(' '); + for (i=0; i<size; i++) + putc('\b'); +} + #ifdef CONFIG_DDR_ECC /*-----------------------------------------------------------------------------+ * program_ecc. @@ -2233,8 +2286,10 @@ static void program_ecc_addr(unsigned long start_address, unsigned long end_address; unsigned long address_increment; unsigned long mcopt1; - char str[] = "ECC generation..."; - int i; + char str[] = "ECC generation -"; + char slash[] = "\\|/-\\|/-"; + int loop = 0; + int loopi = 0; current_address = start_address; mfsdram(SDRAM_MCOPT1, mcopt1); @@ -2257,14 +2312,20 @@ static void program_ecc_addr(unsigned long start_address, while (current_address < end_address) { *((unsigned long *)current_address) = 0x00000000; current_address += address_increment; + + if ((loop++ % (2 << 20)) == 0) { + putc('\b'); + putc(slash[loopi++ % 8]); + } } + } else { /* ECC bit set method for cached memory */ dcbz_area(start_address, num_bytes); dflush(); } - for (i=0; i<strlen(str); i++) - putc('\b'); + + blank_string(strlen(str)); sync(); eieio(); @@ -2347,7 +2408,7 @@ static void program_DQS_calibration(unsigned long *dimm_populated, #endif } -static u32 short_mem_test(void) +static int short_mem_test(void) { u32 *membase; u32 bxcr_num; @@ -2371,42 +2432,41 @@ static u32 short_mem_test(void) 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} }; + int l; for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) { mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf); /* Banks enabled */ if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { - /* Bank is enabled */ - membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num))); /*------------------------------------------------------------------ * Run the short memory test. *-----------------------------------------------------------------*/ + membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num))); + for (i = 0; i < NUMMEMTESTS; i++) { for (j = 0; j < NUMMEMWORDS; j++) { membase[j] = test[i][j]; ppcDcbf((u32)&(membase[j])); } sync(); - for (j = 0; j < NUMMEMWORDS; j++) { - if (membase[j] != test[i][j]) { + for (l=0; l<NUMLOOPS; l++) { + for (j = 0; j < NUMMEMWORDS; j++) { + if (membase[j] != test[i][j]) { + ppcDcbf((u32)&(membase[j])); + return 0; + } ppcDcbf((u32)&(membase[j])); - break; } - ppcDcbf((u32)&(membase[j])); + sync(); } - sync(); - if (j < NUMMEMWORDS) - break; } - if (i < NUMMEMTESTS) - break; } /* if bank enabled */ } /* for bxcf_num */ - return bxcr_num; + return 1; } #ifndef HARD_CODED_DQS @@ -2415,12 +2475,10 @@ static u32 short_mem_test(void) *-----------------------------------------------------------------------------*/ static void DQS_calibration_process(void) { - unsigned long ecc_temp; unsigned long rfdc_reg; unsigned long rffd; unsigned long rqdc_reg; unsigned long rqfd; - unsigned long bxcr_num; unsigned long val; long rqfd_average; long rffd_average; @@ -2440,6 +2498,10 @@ static void DQS_calibration_process(void) long max_end; unsigned char fail_found; unsigned char pass_found; + u32 rqfd_start; + char str[] = "Auto calibration -"; + char slash[] = "\\|/-\\|/-"; + int loopi = 0; /*------------------------------------------------------------------ * Test to determine the best read clock delay tuning bits. @@ -2464,11 +2526,16 @@ static void DQS_calibration_process(void) * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed), * from experimentation it is safe to say you will always have a failure. *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MCOPT1, ecc_temp); - ecc_temp &= SDRAM_MCOPT1_MCHK_MASK; - mfsdram(SDRAM_MCOPT1, val); - mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | - SDRAM_MCOPT1_MCHK_NON); + + /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */ + rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */ + + puts(str); + +calibration_loop: + mfsdram(SDRAM_RQDC, rqdc_reg); + mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) | + SDRAM_RQDC_RQFD_ENCODE(rqfd_start)); max_start = 0; min_end = 0; @@ -2492,9 +2559,6 @@ static void DQS_calibration_process(void) fail_found = FALSE; pass_found = FALSE; - /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */ - /* rqdc_reg = mfsdram(SDRAM_RQDC) & ~(SDRAM_RQDC_RQFD_MASK); */ - /* * get the delay line calibration register value */ @@ -2510,13 +2574,10 @@ static void DQS_calibration_process(void) *-----------------------------------------------------------------*/ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd)); - /* do the small memory test */ - bxcr_num = short_mem_test(); - /*------------------------------------------------------------------ * See if the rffd value passed. *-----------------------------------------------------------------*/ - if (bxcr_num == MAXBXCF) { + if (short_mem_test()) { if (fail_found == TRUE) { pass_found = TRUE; if (current_pass_length == 0) @@ -2578,13 +2639,10 @@ static void DQS_calibration_process(void) *-----------------------------------------------------------------*/ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd)); - /* do the small memory test */ - bxcr_num = short_mem_test(); - /*------------------------------------------------------------------ * See if the rffd value passed. *-----------------------------------------------------------------*/ - if (bxcr_num == MAXBXCF) { + if (short_mem_test()) { if (fail_found == TRUE) { pass_found = TRUE; if (current_pass_length == 0) @@ -2612,17 +2670,28 @@ static void DQS_calibration_process(void) } } + rqfd_average = ((max_start + max_end) >> 1); + /*------------------------------------------------------------------ * Make sure we found the valid read passing window. Halt if not *-----------------------------------------------------------------*/ if (window_found == FALSE) { - printf("ERROR: Cannot determine a common read delay for the " + if (rqfd_start < SDRAM_RQDC_RQFD_MAX) { + putc('\b'); + putc(slash[loopi++ % 8]); + + /* try again from with a different RQFD start value */ + rqfd_start++; + goto calibration_loop; + } + + printf("\nERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); hang(); } - rqfd_average = ((max_start + max_end) >> 1); + blank_string(strlen(str)); if (rqfd_average < 0) rqfd_average = 0; @@ -2630,12 +2699,6 @@ static void DQS_calibration_process(void) if (rqfd_average > SDRAM_RQDC_RQFD_MAX) rqfd_average = SDRAM_RQDC_RQFD_MAX; - /*------------------------------------------------------------------ - * Restore the ECC variable to what it originally was - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MCOPT1, val); - mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | ecc_temp); - mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) | SDRAM_RQDC_RQFD_ENCODE(rqfd_average)); diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 96f0f62eb..4068b5320 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -29,7 +29,7 @@ START = start.o resetvec.o kgdb.o SOBJS = dcr.o COBJS = 405gp_pci.o 4xx_enet.o \ bedbug_405.o commproc.o \ - cpu.o cpu_init.o i2c.o interrupts.o \ + cpu.o cpu_init.o gpio.o i2c.o interrupts.o \ miiphy.o ndfc.o sdram.o serial.o \ 40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \ tlb.o traps.o usb_ohci.o usbdev.o \ diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 2d8740cce..8e6bc84db 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -125,6 +125,7 @@ int i2c_bootrom_enabled(void) return (val & SDR0_SDCS_SDD); #endif } +#endif #if defined(CONFIG_440GX) #define SDR0_PINSTP_SHIFT 29 @@ -178,16 +179,37 @@ static char *bootstrap_str[] = { }; #endif +#if defined(CONFIG_405EZ) +#define SDR0_PINSTP_SHIFT 28 +static char *bootstrap_str[] = { + "EBC (8 bits)", + "SPI (fast)", + "NAND (512 page, 4 addr cycle)", + "I2C (Addr 0x50)", + "EBC (32 bits)", + "I2C (Addr 0x50)", + "NAND (2K page, 5 addr cycle)", + "I2C (Addr 0x50)", + "EBC (16 bits)", + "Reserved", + "NAND (2K page, 4 addr cycle)", + "I2C (Addr 0x50)", + "NAND (512 page, 3 addr cycle)", + "I2C (Addr 0x50)", + "SPI (slow)", + "I2C (Addr 0x50)", +}; +#endif + #if defined(SDR0_PINSTP_SHIFT) static int bootstrap_option(void) { unsigned long val; - mfsdr(sdr_pinstp, val); - return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT); + mfsdr(SDR_PINSTP, val); + return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT); } #endif /* SDR0_PINSTP_SHIFT */ -#endif #if defined(CONFIG_440) @@ -403,11 +425,11 @@ int checkcpu (void) #if defined(I2C_BOOTROM) printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); +#endif /* I2C_BOOTROM */ #if defined(SDR0_PINSTP_SHIFT) printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A'); printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); #endif /* SDR0_PINSTP_SHIFT */ -#endif /* I2C_BOOTROM */ #if defined(CONFIG_PCI) printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis"); diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 9d1cd1343..66e863726 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -25,6 +25,7 @@ #include <watchdog.h> #include <ppc4xx_enet.h> #include <asm/processor.h> +#include <asm/gpio.h> #include <ppc4xx.h> #if defined(CONFIG_405GP) || defined(CONFIG_405EP) @@ -98,118 +99,6 @@ DECLARE_GLOBAL_DATA_PTR; # endif #endif /* CFG_INIT_DCACHE_CS */ -#if defined(CFG_440_GPIO_TABLE) -gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_440_GPIO_TABLE; - -void set_chip_gpio_configuration(gpio_param_s (*gpio_tab)[GPIO_GROUP_MAX][GPIO_MAX]) -{ - unsigned char i=0, j=0, reg_offset = 0, gpio_core; - unsigned long gpio_reg, gpio_core_add; - - for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) { - j = 0; - reg_offset = 0; - /* GPIO config of the GPIOs 0 to 31 */ - for (i=0; i<GPIO_MAX; i++, j++) { - if (i == GPIO_MAX/2) { - reg_offset = 4; - j = i-16; - } - - gpio_core_add = (*gpio_tab)[gpio_core][i].add; - - if (((*gpio_tab)[gpio_core][i].in_out == GPIO_IN) || - ((*gpio_tab)[gpio_core][i].in_out == GPIO_BI)) { - - switch ((*gpio_tab)[gpio_core][i].alt_nb) { - case GPIO_SEL: - break; - - case GPIO_ALT1: - gpio_reg = in32(GPIO_IS1(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2)); - out32(GPIO_IS1(gpio_core_add+reg_offset), gpio_reg); - break; - - case GPIO_ALT2: - gpio_reg = in32(GPIO_IS2(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2)); - out32(GPIO_IS2(gpio_core_add+reg_offset), gpio_reg); - break; - - case GPIO_ALT3: - gpio_reg = in32(GPIO_IS3(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2)); - out32(GPIO_IS3(gpio_core_add+reg_offset), gpio_reg); - break; - } - } - - if (((*gpio_tab)[gpio_core][i].in_out == GPIO_OUT) || - ((*gpio_tab)[gpio_core][i].in_out == GPIO_BI)) { - - switch ((*gpio_tab)[gpio_core][i].alt_nb) { - case GPIO_SEL: - if (gpio_core == GPIO0) { - gpio_reg = in32(GPIO0_TCR) | (0x80000000 >> (j)); - out32(GPIO0_TCR, gpio_reg); - } - - if (gpio_core == GPIO1) { - gpio_reg = in32(GPIO1_TCR) | (0x80000000 >> (j)); - out32(GPIO1_TCR, gpio_reg); - } - - gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg); - gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg); - break; - - case GPIO_ALT1: - gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2)); - out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg); - gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2)); - out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg); - break; - - case GPIO_ALT2: - gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2)); - out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg); - gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2)); - out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg); - break; - - case GPIO_ALT3: - gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2)); - out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg); - gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) - & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2)); - out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg); - break; - } - } - } - } -} -#endif /* CFG_440_GPIO_TABLE */ - /* * Breath some life into the CPU... * @@ -248,7 +137,7 @@ cpu_init_f (void) #endif /* CONFIG_405EP */ #if defined(CFG_440_GPIO_TABLE) - set_chip_gpio_configuration(&gpio_tab); + gpio_set_chip_configuration(); #endif /* CFG_440_GPIO_TABLE */ /* diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c new file mode 100644 index 000000000..dd84e58a1 --- /dev/null +++ b/cpu/ppc4xx/gpio.c @@ -0,0 +1,214 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/gpio.h> + +#if defined(CFG_440_GPIO_TABLE) +gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_440_GPIO_TABLE; +#endif + +#if defined(GPIO0_OSRL) +/* Only some 4xx variants support alternate funtions on the GPIO's */ +void gpio_config(int pin, int in_out, int gpio_alt, int out_val) +{ + u32 mask; + u32 mask2; + u32 val; + u32 offs = 0; + u32 offs2 = 0; + int pin2 = pin << 1; + + if (pin >= GPIO_MAX) { + offs = 0x100; + pin -= GPIO_MAX; + } + + if (pin >= GPIO_MAX/2) { + offs2 = 0x100; + pin2 = (pin - GPIO_MAX/2) << 1; + } + + mask = 0x80000000 >> pin; + mask2 = 0xc0000000 >> (pin2 << 1); + + /* first set TCR to 0 */ + out32(GPIO0_TCR + offs, in32(GPIO0_TCR + offs) & ~mask); + + if (in_out == GPIO_OUT) { + val = in32(GPIO0_OSRL + offs + offs2) & ~mask2; + switch (gpio_alt) { + case GPIO_ALT1: + val |= GPIO_ALT1_SEL >> pin2; + break; + case GPIO_ALT2: + val |= GPIO_ALT2_SEL >> pin2; + break; + case GPIO_ALT3: + val |= GPIO_ALT3_SEL >> pin2; + break; + } + out32(GPIO0_OSRL + offs + offs2, val); + + /* setup requested output value */ + if (out_val == GPIO_OUT_0) + out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~mask); + else if (out_val == GPIO_OUT_1) + out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) | mask); + + /* now configure TCR to drive output if selected */ + out32(GPIO0_TCR + offs, in32(GPIO0_TCR + offs) | mask); + } else { + val = in32(GPIO0_ISR1L + offs + offs2) & ~mask2; + val |= GPIO_IN_SEL >> pin2; + out32(GPIO0_ISR1L + offs + offs2, val); + } +} +#endif /* GPIO_OSRL */ + +void gpio_write_bit(int pin, int val) +{ + u32 offs = 0; + + if (pin >= GPIO_MAX) { + offs = 0x100; + pin -= GPIO_MAX; + } + + if (val) + out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) | GPIO_VAL(pin)); + else + out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~GPIO_VAL(pin)); +} + +#if defined(CFG_440_GPIO_TABLE) +void gpio_set_chip_configuration(void) +{ + unsigned char i=0, j=0, offs=0, gpio_core; + unsigned long reg, core_add; + + for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) { + j = 0; + offs = 0; + /* GPIO config of the GPIOs 0 to 31 */ + for (i=0; i<GPIO_MAX; i++, j++) { + if (i == GPIO_MAX/2) { + offs = 4; + j = i-16; + } + + core_add = gpio_tab[gpio_core][i].add; + + if ((gpio_tab[gpio_core][i].in_out == GPIO_IN) || + (gpio_tab[gpio_core][i].in_out == GPIO_BI)) { + + switch (gpio_tab[gpio_core][i].alt_nb) { + case GPIO_SEL: + break; + + case GPIO_ALT1: + reg = in32(GPIO_IS1(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_IN_SEL >> (j*2)); + out32(GPIO_IS1(core_add+offs), reg); + break; + + case GPIO_ALT2: + reg = in32(GPIO_IS2(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_IN_SEL >> (j*2)); + out32(GPIO_IS2(core_add+offs), reg); + break; + + case GPIO_ALT3: + reg = in32(GPIO_IS3(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_IN_SEL >> (j*2)); + out32(GPIO_IS3(core_add+offs), reg); + break; + } + } + + if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) || + (gpio_tab[gpio_core][i].in_out == GPIO_BI)) { + + switch (gpio_tab[gpio_core][i].alt_nb) { + case GPIO_SEL: + if (gpio_core == GPIO0) { + reg = in32(GPIO0_TCR) | (0x80000000 >> (j)); + out32(GPIO0_TCR, reg); + } + + if (gpio_core == GPIO1) { + reg = in32(GPIO1_TCR) | (0x80000000 >> (j)); + out32(GPIO1_TCR, reg); + } + + reg = in32(GPIO_OS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + out32(GPIO_OS(core_add+offs), reg); + reg = in32(GPIO_TS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + out32(GPIO_TS(core_add+offs), reg); + break; + + case GPIO_ALT1: + reg = in32(GPIO_OS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_ALT1_SEL >> (j*2)); + out32(GPIO_OS(core_add+offs), reg); + reg = in32(GPIO_TS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_ALT1_SEL >> (j*2)); + out32(GPIO_TS(core_add+offs), reg); + break; + + case GPIO_ALT2: + reg = in32(GPIO_OS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_ALT2_SEL >> (j*2)); + out32(GPIO_OS(core_add+offs), reg); + reg = in32(GPIO_TS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_ALT2_SEL >> (j*2)); + out32(GPIO_TS(core_add+offs), reg); + break; + + case GPIO_ALT3: + reg = in32(GPIO_OS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_ALT3_SEL >> (j*2)); + out32(GPIO_OS(core_add+offs), reg); + reg = in32(GPIO_TS(core_add+offs)) + & ~(GPIO_MASK >> (j*2)); + reg = reg | (GPIO_ALT3_SEL >> (j*2)); + out32(GPIO_TS(core_add+offs), reg); + break; + } + } + } + } +} +#endif /* CFG_440_GPIO_TABLE */ diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index 8f4da8621..47c264e22 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -91,7 +91,6 @@ static void _i2c_bus_reset(void) void i2c_init(int speed, int slaveadd) { - sys_info_t sysInfo; unsigned long freqOPB; int val, divisor; int bus; @@ -124,8 +123,7 @@ void i2c_init(int speed, int slaveadd) /* Clock divide Register */ /* get OPB frequency */ - get_sys_info(&sysInfo); - freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv; + freqOPB = get_OPB_freq(); /* set divisor according to freqOPB */ divisor = (freqOPB - 1) / 10000000; if (divisor == 0) diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index d918b3ec1..a96083caa 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -2,6 +2,7 @@ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de> + * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -757,7 +758,6 @@ _start: #endif /* CONFIG_405EP */ #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE) -/* test-only... (clean up later when NAND booting is supported) */ #if defined(CONFIG_405EZ) /******************************************************************** * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2 @@ -786,41 +786,7 @@ _start: mtdcr ocmdsisdpc,r4 isync - -#if defined(CONFIG_NAND_SPL) - /* - * 405EZ can boot from NAND Flash. - * If we are booting the SPL (Pre-loader), copy code from - * the mapped 4K NAND Flash to the OCM - */ - li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1 - mtctr r4 - lis r2,CFG_NAND_BOOT_SPL_SRC@h - ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l - lis r3,CFG_NAND_BOOT_SPL_DST@h - ori r3,r3,CFG_NAND_BOOT_SPL_DST@l -spl_loop: - lwzu r4,4(r2) - stwu r4,4(r3) - bdnz spl_loop - - /* - * Jump to code in OCM Ram - */ - bl 00f -00: mflr r10 - lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h - ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l - sub r10,r10,r3 - addi r10,r10,28 - mtlr r10 - blr -start_ram: - sync - isync -#endif -#else -/* ...test-only */ +#else /* CONFIG_405EZ */ /******************************************************************** * Setup OCM - On Chip Memory *******************************************************************/ @@ -828,14 +794,15 @@ start_ram: lis r0, 0x7FFF ori r0, r0, 0xFFFF mfdcr r3, ocmiscntl /* get instr-side IRAM config */ - mfdcr r4, ocmdscntl /* get data-side IRAM config */ - and r3, r3, r0 /* disable data-side IRAM */ - and r4, r4, r0 /* disable data-side IRAM */ - mtdcr ocmiscntl, r3 /* set instr-side IRAM config */ - mtdcr ocmdscntl, r4 /* set data-side IRAM config */ + mfdcr r4, ocmdscntl /* get data-side IRAM config */ + and r3, r3, r0 /* disable data-side IRAM */ + and r4, r4, r0 /* disable data-side IRAM */ + mtdcr ocmiscntl, r3 /* set instr-side IRAM config */ + mtdcr ocmdscntl, r4 /* set data-side IRAM config */ isync - addis r3, 0, CFG_OCM_DATA_ADDR@h /* OCM location */ + lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ + ori r3,r3,CFG_OCM_DATA_ADDR@l mtdcr ocmdsarc, r3 addis r4, 0, 0xC000 /* OCM data area enabled */ mtdcr ocmdscntl, r4 @@ -1925,11 +1892,11 @@ pll_wait: #endif /* CONFIG_405EP */ #if defined(CONFIG_440) -#define function_prolog(func_name) .text; \ +#define function_prolog(func_name) .text; \ .align 2; \ .globl func_name; \ func_name: -#define function_epilog(func_name) .type func_name,@function; \ +#define function_epilog(func_name) .type func_name,@function; \ .size func_name,.-func_name /*----------------------------------------------------------------------------+ @@ -1985,13 +1952,13 @@ pll_wait: +----------------------------------------------------------------------------*/ function_prolog(dcbz_area) rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ra2 - addi r5,r5,0x0001 -..d_ra2:mtctr r5 -..d_ag2:dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag2 + rlwinm r5,r4,27,5,31 + beq ..d_ra2 + addi r5,r5,0x0001 +..d_ra2:mtctr r5 +..d_ag2:dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag2 sync blr function_epilog(dcbz_area) @@ -2000,26 +1967,26 @@ pll_wait: | dflush. Assume 32K at vector address is cachable. +----------------------------------------------------------------------------*/ function_prolog(dflush) - mfmsr r9 - rlwinm r8,r9,0,15,13 - rlwinm r8,r8,0,17,15 - mtmsr r8 - addi r3,r0,0x0000 - mtspr dvlim,r3 - mfspr r3,ivpr - addi r4,r0,1024 - mtctr r4 + mfmsr r9 + rlwinm r8,r9,0,15,13 + rlwinm r8,r8,0,17,15 + mtmsr r8 + addi r3,r0,0x0000 + mtspr dvlim,r3 + mfspr r3,ivpr + addi r4,r0,1024 + mtctr r4 ..dflush_loop: - lwz r6,0x0(r3) - addi r3,r3,32 - bdnz ..dflush_loop - addi r3,r3,-32 - mtctr r4 -..ag: dcbf r0,r3 - addi r3,r3,-32 - bdnz ..ag + lwz r6,0x0(r3) + addi r3,r3,32 + bdnz ..dflush_loop + addi r3,r3,-32 + mtctr r4 +..ag: dcbf r0,r3 + addi r3,r3,-32 + bdnz ..ag sync - mtmsr r9 + mtmsr r9 blr function_epilog(dflush) #endif /* CONFIG_440 */ diff --git a/disk/part.c b/disk/part.c index 9e8bd4fb8..acc1a748e 100644 --- a/disk/part.c +++ b/disk/part.c @@ -179,6 +179,7 @@ void dev_print (block_dev_desc_t *dev_desc) #if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ + defined(CONFIG_MMC) || \ defined(CONFIG_SYSTEMACE) ) #if defined(CONFIG_MAC_PARTITION) || \ diff --git a/doc/README.Lite5200B_low_power b/doc/README.Lite5200B_low_power new file mode 100644 index 000000000..5b04fbba7 --- /dev/null +++ b/doc/README.Lite5200B_low_power @@ -0,0 +1,22 @@ +Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM) +---------------------------------------------------------- + +Low-power mode as described in Lite5200B User's Manual, means that +with support of MC68HLC908QT1 microcontroller (refered to as QT), +everything but the SDRAM can be powered down. This brings +maximum power saving, while one can still restore previous state +quickly. + +Quick overview where U-Boot comes into the picture: +- OS saves device states +- OS saves wakeup handler address to physical 0x0, puts SDRAM into + self-refresh and signals to QT, it should power down the board +- / board is sleeping here / +- someone presses SW4 (connected to QT) +- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up, + so get SDRAM out of self-refresh and transfer control to OS + wakeup handler +- OS restores device states + +This was tested on Linux with USB and Ethernet in use. Adding +support for other devices is an OS issue. diff --git a/doc/README.NetConsole b/doc/README.NetConsole index cc35a0a8f..fea8e3364 100644 --- a/doc/README.NetConsole +++ b/doc/README.NetConsole @@ -38,6 +38,11 @@ The script expects exactly one argument, which is interpreted as the target IP address (or host name, assuming DNS is working). The script can be interrupted by pressing ^T (CTRL-T). +Be aware that in some distributives (Fedora Core 5 at least) +usage of nc has been changed and -l and -p options are considered +as mutually exclusive. If nc complains about options provided, +you can just remove the -p option from the script. + It turns out that 'netcat' cannot be used to listen to broadcast packets. We developed our own tool 'ncb' (see tools directory) that listens to broadcast packets on a given port and dumps them to the diff --git a/doc/README.mpc7448hpc2 b/doc/README.mpc7448hpc2 new file mode 100644 index 000000000..8659e8367 --- /dev/null +++ b/doc/README.mpc7448hpc2 @@ -0,0 +1,184 @@ +Freescale MPC7448hpc2 (Taiga) board +=================================== + +Created 08/11/2006 Roy Zang +-------------------------- +MPC7448hpc2 (Taiga) board is a high-performance PowerPC server reference +design, which is optimized for high speed throughput between the processor and +the memory, disk drive and Ethernet port subsystems. + +MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be +used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX +chassis. + +Building U-Boot +------------------ +The mpc7448hpc2 code base is known to compile using: + Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3 + + $ make mpc7448hpc2_config + Configuring for mpc7448hpc2 board... + + $ make + +Memory Map +---------- + +The memory map is setup for Linux to operate properly. + +The mapping is: + + Range Start Range End Definition Size + + 0x0000_0000 0x7fff_ffff DDR 2G + 0xe000_0000 0xe7ff_ffff PCI Memory 128M + 0xfa00_0000 0xfaff_ffff PCI IO 16M + 0xfb00_0000 0xfbff_ffff PCI Config 16M + 0xfc00_0000 0xfc0f_ffff NVRAM/CADMUS 1M + 0xfe00_0000 0xfeff_ffff PromJet 16M + 0xff00_0000 0xff80_0000 FLASH (boot flash) 8M + 0xff80_0000 0xffff_ffff FLASH (second half flash) 8M + +Using Flash +----------- + +The MPC7448hpc2 board has two "banks" of flash, each 8MB in size +(2^23 = 0x00800000). + +Note: the "bank" here refers to half of the flash. In fact, there is only one +bank of flash, which is divided into low and high half. Each is controlled by +the most significant bit of the address bus. The so called "bank" is only for +convenience. + +There is a switch which allows the "bank" to be selected. The switch +settings for updating flash are given below. + +The u-boot commands for copying the boot-bank into the secondary bank are +as follows: + + erase ff800000 ff880000 + cp.b ff000000 ff800000 80000 + +U-boot commands for downloading an image via tftp and flashing +it into the secondary bank: + + tftp 10000 <u-boot.bin.image> + erase ff000000 ff080000 + cp.b 10000 ff000000 80000 + +After copying the image into the second bank of flash, be sure to toggle +SW3[4] on board before resetting the board in order to set the +secondary bank as the boot-bank. + +Board Switches +---------------------- + +Most switches on the board should not be changed. The most frequent +user-settable switches on the board are used to configure +the flash banks and determining the PCI frequency. + +SW1[1-5]: Processor core voltage + + 12345 Core Voltage + ----- + SW1=01111 1.000V. + SW1=01101 1.100V. + SW1=01011 1.200V. + SW1=01001 1.300V only for MPC7447A. + + +SW2[1-6]: CPU core frequency + + CPU Core Frequency (MHz) + Bus Frequency + 123456 100 133 167 200 Ratio + + ------ + SW2=101100 500 667 833 1000 5x + SW2=100100 550 733 917 1100 5.5x + SW2=110100 600 800 1000 1200 6x + SW2=010100 650 866 1083 1300 6.5x + SW2=001000 700 930 1167 1400 7x + SW2=000100 750 1000 1250 1500 7.5x + SW2=110000 800 1066 1333 1600 8x + SW2=011000 850 1333 1417 1700 8.5x only for MPC7447A + SW2=011110 900 1200 1500 1800 9x + +This table shows only a subset of available frequency options; see the CPU +hardware specifications for more information. + +SW2[7-8]: Bus Protocol and CPU Reset Option + + 7 + - + SW2=0 System bus uses MPX bus protocol + SW2=1 System bus uses 60x bus protocol + + 8 + - + SW2=0 TSI108 can cause CPU reset + SW2=1 TSI108 can not cause CPU reset + +SW3[1-8] system options + + 123 + --- + SW3=xxx Connected to GPIO[0:2] on TSI108 + + 4 + - + SW3=0 CPU boots from low half of flash + SW3=1 CPU boots from high half of flash + + 5 + - + SW3=0 SATA and slot2 connected to PCI bus + SW3=1 Only slot1 connected to PCI bus + + 6 + - + SW3=0 USB connected to PCI bus + SW3=1 USB disconnected from PCI bus + + 7 + - + SW3=0 Flash is write protected + SW3=1 Flash is NOT write protected + + 8 + - + SW3=0 CPU will boot from flash + SW3=1 CPU will boot from PromJet + +SW4[1-3]: System bus frequency + + Bus Frequency (MHz) + --- + SW4=010 183 + SW4=011 100 + SW4=100 133 + SW4=101 166 only for MPC7447A + SW4=110 200 only for MPC7448 + others reserved + +SW4[4-6]: DDR2 SDRAM frequency + + Bus Frequency (MHz) + --- + SW4=000 external clock + SW4=011 system clock + SW4=100 133 + SW4=101 166 + SW4=110 200 + others reserved + +SW4[7-8]: PCI/PCI-X frequency control + 7 + - + SW4=0 PCI/PCI-X bus operates normally + SW4=1 PCI bus forced to PCI-33 mode + + 8 + - + SW4=0 PCI-X mode at 133 MHz allowed + SW4=1 PCI-X mode limited to 100 MHz diff --git a/drivers/Makefile b/drivers/Makefile index fffc22a5e..d68cba682 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -32,7 +32,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ e1000.o eepro100.o \ i8042.o inca-ip_sw.o keyboard.o \ - lan91c96.o \ + lan91c96.o macb.o \ natsemi.o ne2000.o netarm_eth.o netconsole.o \ ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \ omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \ @@ -46,6 +46,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ status_led.o sym53c8xx.o systemace.o ahci.o \ ti_pci1410a.o tigon3.o tsec.o \ + tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ videomodes.o w83c553f.o \ ks8695eth.o \ diff --git a/drivers/atmel_usart.c b/drivers/atmel_usart.c index 41c37683d..f35b99730 100644 --- a/drivers/atmel_usart.c +++ b/drivers/atmel_usart.c @@ -19,7 +19,22 @@ #ifdef CONFIG_ATMEL_USART #include <asm/io.h> -#include <asm/arch/platform.h> +#include <asm/arch/clk.h> +#include <asm/arch/memory-map.h> + +#if defined(CONFIG_USART0) +# define USART_ID 0 +# define USART_BASE USART0_BASE +#elif defined(CONFIG_USART1) +# define USART_ID 1 +# define USART_BASE USART1_BASE +#elif defined(CONFIG_USART2) +# define USART_ID 2 +# define USART_BASE USART2_BASE +#elif defined(CONFIG_USART3) +# define USART_ID 3 +# define USART_BASE USART3_BASE +#endif #include "atmel_usart.h" @@ -35,26 +50,23 @@ void serial_setbrg(void) * Baud Rate = -------------- * 16 * CD */ - usart_hz = pm_get_clock_freq(gd->console_uart->resource[0].u.clock.id); + usart_hz = get_usart_clk_rate(USART_ID); divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate; - usart3_writel(gd->console_uart, BRGR, USART3_BF(CD, divisor)); + usart3_writel(BRGR, USART3_BF(CD, divisor)); } int serial_init(void) { - usart3_writel(gd->console_uart, CR, - USART3_BIT(RSTRX) | USART3_BIT(RSTTX)); + usart3_writel(CR, USART3_BIT(RSTRX) | USART3_BIT(RSTTX)); serial_setbrg(); - usart3_writel(gd->console_uart, CR, - USART3_BIT(RXEN) | USART3_BIT(TXEN)); - usart3_writel(gd->console_uart, MR, - USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) - | USART3_BF(USCLKS, USART3_USCLKS_MCK) - | USART3_BF(CHRL, USART3_CHRL_8) - | USART3_BF(PAR, USART3_PAR_NONE) - | USART3_BF(NBSTOP, USART3_NBSTOP_1)); + usart3_writel(CR, USART3_BIT(RXEN) | USART3_BIT(TXEN)); + usart3_writel(MR, (USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) + | USART3_BF(USCLKS, USART3_USCLKS_MCK) + | USART3_BF(CHRL, USART3_CHRL_8) + | USART3_BF(PAR, USART3_PAR_NONE) + | USART3_BF(NBSTOP, USART3_NBSTOP_1))); return 0; } @@ -64,8 +76,8 @@ void serial_putc(char c) if (c == '\n') serial_putc('\r'); - while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(TXRDY))) ; - usart3_writel(gd->console_uart, THR, c); + while (!(usart3_readl(CSR) & USART3_BIT(TXRDY))) ; + usart3_writel(THR, c); } void serial_puts(const char *s) @@ -76,13 +88,13 @@ void serial_puts(const char *s) int serial_getc(void) { - while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY))) ; - return usart3_readl(gd->console_uart, RHR); + while (!(usart3_readl(CSR) & USART3_BIT(RXRDY))) ; + return usart3_readl(RHR); } int serial_tstc(void) { - return (usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY)) != 0; + return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0; } #endif /* CONFIG_ATMEL_USART */ diff --git a/drivers/atmel_usart.h b/drivers/atmel_usart.h index fad90a811..af3773a99 100644 --- a/drivers/atmel_usart.h +++ b/drivers/atmel_usart.h @@ -306,9 +306,9 @@ | USART3_BF(name,value)) /* Register access macros */ -#define usart3_readl(port,reg) \ - readl((port)->regs + USART3_##reg) -#define usart3_writel(port,reg,value) \ - writel((value), (port)->regs + USART3_##reg) +#define usart3_readl(reg) \ + readl((void *)USART_BASE + USART3_##reg) +#define usart3_writel(reg,value) \ + writel((value), (void *)USART_BASE + USART3_##reg) #endif /* __DRIVERS_ATMEL_USART_H__ */ diff --git a/drivers/macb.c b/drivers/macb.c new file mode 100644 index 000000000..186ab19d3 --- /dev/null +++ b/drivers/macb.c @@ -0,0 +1,575 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <common.h> + +#if defined(CONFIG_MACB) && (CONFIG_COMMANDS & (CFG_CMD_NET | CFG_CMD_MII)) + +/* + * The u-boot networking stack is a little weird. It seems like the + * networking core allocates receive buffers up front without any + * regard to the hardware that's supposed to actually receive those + * packets. + * + * The MACB receives packets into 128-byte receive buffers, so the + * buffers allocated by the core isn't very practical to use. We'll + * allocate our own, but we need one such buffer in case a packet + * wraps around the DMA ring so that we have to copy it. + * + * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific + * configuration header. This way, the core allocates one RX buffer + * and one TX buffer, each of which can hold a ethernet packet of + * maximum size. + * + * For some reason, the networking core unconditionally specifies a + * 32-byte packet "alignment" (which really should be called + * "padding"). MACB shouldn't need that, but we'll refrain from any + * core modifications here... + */ + +#include <net.h> +#include <malloc.h> + +#include <linux/mii.h> +#include <asm/io.h> +#include <asm/dma-mapping.h> +#include <asm/arch/clk.h> + +#include "macb.h" + +#define CFG_MACB_RX_BUFFER_SIZE 4096 +#define CFG_MACB_RX_RING_SIZE (CFG_MACB_RX_BUFFER_SIZE / 128) +#define CFG_MACB_TX_RING_SIZE 16 +#define CFG_MACB_TX_TIMEOUT 1000 +#define CFG_MACB_AUTONEG_TIMEOUT 5000000 + +struct macb_dma_desc { + u32 addr; + u32 ctrl; +}; + +#define RXADDR_USED 0x00000001 +#define RXADDR_WRAP 0x00000002 + +#define RXBUF_FRMLEN_MASK 0x00000fff +#define RXBUF_FRAME_START 0x00004000 +#define RXBUF_FRAME_END 0x00008000 +#define RXBUF_TYPEID_MATCH 0x00400000 +#define RXBUF_ADDR4_MATCH 0x00800000 +#define RXBUF_ADDR3_MATCH 0x01000000 +#define RXBUF_ADDR2_MATCH 0x02000000 +#define RXBUF_ADDR1_MATCH 0x04000000 +#define RXBUF_BROADCAST 0x80000000 + +#define TXBUF_FRMLEN_MASK 0x000007ff +#define TXBUF_FRAME_END 0x00008000 +#define TXBUF_NOCRC 0x00010000 +#define TXBUF_EXHAUSTED 0x08000000 +#define TXBUF_UNDERRUN 0x10000000 +#define TXBUF_MAXRETRY 0x20000000 +#define TXBUF_WRAP 0x40000000 +#define TXBUF_USED 0x80000000 + +struct macb_device { + void *regs; + + unsigned int rx_tail; + unsigned int tx_head; + unsigned int tx_tail; + + void *rx_buffer; + void *tx_buffer; + struct macb_dma_desc *rx_ring; + struct macb_dma_desc *tx_ring; + + unsigned long rx_buffer_dma; + unsigned long rx_ring_dma; + unsigned long tx_ring_dma; + + const struct device *dev; + struct eth_device netdev; + unsigned short phy_addr; +}; +#define to_macb(_nd) container_of(_nd, struct macb_device, netdev) + +static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value) +{ + unsigned long netctl; + unsigned long netstat; + unsigned long frame; + + netctl = macb_readl(macb, NCR); + netctl |= MACB_BIT(MPE); + macb_writel(macb, NCR, netctl); + + frame = (MACB_BF(SOF, 1) + | MACB_BF(RW, 1) + | MACB_BF(PHYA, macb->phy_addr) + | MACB_BF(REGA, reg) + | MACB_BF(CODE, 2) + | MACB_BF(DATA, value)); + macb_writel(macb, MAN, frame); + + do { + netstat = macb_readl(macb, NSR); + } while (!(netstat & MACB_BIT(IDLE))); + + netctl = macb_readl(macb, NCR); + netctl &= ~MACB_BIT(MPE); + macb_writel(macb, NCR, netctl); +} + +static u16 macb_mdio_read(struct macb_device *macb, u8 reg) +{ + unsigned long netctl; + unsigned long netstat; + unsigned long frame; + + netctl = macb_readl(macb, NCR); + netctl |= MACB_BIT(MPE); + macb_writel(macb, NCR, netctl); + + frame = (MACB_BF(SOF, 1) + | MACB_BF(RW, 2) + | MACB_BF(PHYA, macb->phy_addr) + | MACB_BF(REGA, reg) + | MACB_BF(CODE, 2)); + macb_writel(macb, MAN, frame); + + do { + netstat = macb_readl(macb, NSR); + } while (!(netstat & MACB_BIT(IDLE))); + + frame = macb_readl(macb, MAN); + + netctl = macb_readl(macb, NCR); + netctl &= ~MACB_BIT(MPE); + macb_writel(macb, NCR, netctl); + + return MACB_BFEXT(DATA, frame); +} + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + +static int macb_send(struct eth_device *netdev, volatile void *packet, + int length) +{ + struct macb_device *macb = to_macb(netdev); + unsigned long paddr, ctrl; + unsigned int tx_head = macb->tx_head; + int i; + + paddr = dma_map_single(packet, length, DMA_TO_DEVICE); + + ctrl = length & TXBUF_FRMLEN_MASK; + ctrl |= TXBUF_FRAME_END; + if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) { + ctrl |= TXBUF_WRAP; + macb->tx_head = 0; + } else + macb->tx_head++; + + macb->tx_ring[tx_head].ctrl = ctrl; + macb->tx_ring[tx_head].addr = paddr; + macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART)); + + /* + * I guess this is necessary because the networking core may + * re-use the transmit buffer as soon as we return... + */ + i = 0; + while (!(macb->tx_ring[tx_head].ctrl & TXBUF_USED)) { + if (i > CFG_MACB_TX_TIMEOUT) { + printf("%s: TX timeout\n", netdev->name); + break; + } + udelay(1); + i++; + } + + dma_unmap_single(packet, length, paddr); + + if (i <= CFG_MACB_TX_TIMEOUT) { + ctrl = macb->tx_ring[tx_head].ctrl; + if (ctrl & TXBUF_UNDERRUN) + printf("%s: TX underrun\n", netdev->name); + if (ctrl & TXBUF_EXHAUSTED) + printf("%s: TX buffers exhausted in mid frame\n", + netdev->name); + } + + /* No one cares anyway */ + return 0; +} + +static void reclaim_rx_buffers(struct macb_device *macb, + unsigned int new_tail) +{ + unsigned int i; + + i = macb->rx_tail; + while (i > new_tail) { + macb->rx_ring[i].addr &= ~RXADDR_USED; + i++; + if (i > CFG_MACB_RX_RING_SIZE) + i = 0; + } + + while (i < new_tail) { + macb->rx_ring[i].addr &= ~RXADDR_USED; + i++; + } + + macb->rx_tail = new_tail; +} + +static int macb_recv(struct eth_device *netdev) +{ + struct macb_device *macb = to_macb(netdev); + unsigned int rx_tail = macb->rx_tail; + void *buffer; + int length; + int wrapped = 0; + u32 status; + + for (;;) { + if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED)) + return -1; + + status = macb->rx_ring[rx_tail].ctrl; + if (status & RXBUF_FRAME_START) { + if (rx_tail != macb->rx_tail) + reclaim_rx_buffers(macb, rx_tail); + wrapped = 0; + } + + if (status & RXBUF_FRAME_END) { + buffer = macb->rx_buffer + 128 * macb->rx_tail; + length = status & RXBUF_FRMLEN_MASK; + if (wrapped) { + unsigned int headlen, taillen; + + headlen = 128 * (CFG_MACB_RX_RING_SIZE + - macb->rx_tail); + taillen = length - headlen; + memcpy((void *)NetRxPackets[0], + buffer, headlen); + memcpy((void *)NetRxPackets[0] + headlen, + macb->rx_buffer, taillen); + buffer = (void *)NetRxPackets[0]; + } + + NetReceive(buffer, length); + if (++rx_tail >= CFG_MACB_RX_RING_SIZE) + rx_tail = 0; + reclaim_rx_buffers(macb, rx_tail); + } else { + if (++rx_tail >= CFG_MACB_RX_RING_SIZE) { + wrapped = 1; + rx_tail = 0; + } + } + } + + return 0; +} + +static int macb_phy_init(struct macb_device *macb) +{ + struct eth_device *netdev = &macb->netdev; + u32 ncfgr; + u16 phy_id, status, adv, lpa; + int media, speed, duplex; + int i; + + /* Check if the PHY is up to snuff... */ + phy_id = macb_mdio_read(macb, MII_PHYSID1); + if (phy_id == 0xffff) { + printf("%s: No PHY present\n", netdev->name); + return 0; + } + + adv = ADVERTISE_CSMA | ADVERTISE_ALL; + macb_mdio_write(macb, MII_ADVERTISE, adv); + printf("%s: Starting autonegotiation...\n", netdev->name); + macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE + | BMCR_ANRESTART)); + +#if 0 + for (i = 0; i < 9; i++) + printf("mii%d: 0x%04x\n", i, macb_mdio_read(macb, i)); +#endif + + for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) { + status = macb_mdio_read(macb, MII_BMSR); + if (status & BMSR_ANEGCOMPLETE) + break; + udelay(100); + } + + if (status & BMSR_ANEGCOMPLETE) + printf("%s: Autonegotiation complete\n", netdev->name); + else + printf("%s: Autonegotiation timed out (status=0x%04x)\n", + netdev->name, status); + + if (!(status & BMSR_LSTATUS)) { + for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) { + udelay(100); + status = macb_mdio_read(macb, MII_BMSR); + if (status & BMSR_LSTATUS) + break; + } + } + + if (!(status & BMSR_LSTATUS)) { + printf("%s: link down (status: 0x%04x)\n", + netdev->name, status); + return 0; + } else { + lpa = macb_mdio_read(macb, MII_LPA); + media = mii_nway_result(lpa & adv); + speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) + ? 1 : 0); + duplex = (media & ADVERTISE_FULL) ? 1 : 0; + printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n", + netdev->name, + speed ? "100" : "10", + duplex ? "full" : "half", + lpa); + + ncfgr = macb_readl(macb, NCFGR); + ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD)); + if (speed) + ncfgr |= MACB_BIT(SPD); + if (duplex) + ncfgr |= MACB_BIT(FD); + macb_writel(macb, NCFGR, ncfgr); + return 1; + } +} + +static int macb_init(struct eth_device *netdev, bd_t *bd) +{ + struct macb_device *macb = to_macb(netdev); + unsigned long paddr; + u32 hwaddr_bottom; + u16 hwaddr_top; + int i; + + /* + * macb_halt should have been called at some point before now, + * so we'll assume the controller is idle. + */ + + /* initialize DMA descriptors */ + paddr = macb->rx_buffer_dma; + for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) { + if (i == (CFG_MACB_RX_RING_SIZE - 1)) + paddr |= RXADDR_WRAP; + macb->rx_ring[i].addr = paddr; + macb->rx_ring[i].ctrl = 0; + paddr += 128; + } + for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) { + macb->tx_ring[i].addr = 0; + if (i == (CFG_MACB_TX_RING_SIZE - 1)) + macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP; + else + macb->tx_ring[i].ctrl = TXBUF_USED; + } + macb->rx_tail = macb->tx_head = macb->tx_tail = 0; + + macb_writel(macb, RBQP, macb->rx_ring_dma); + macb_writel(macb, TBQP, macb->tx_ring_dma); + + /* set hardware address */ + hwaddr_bottom = cpu_to_le32(*((u32 *)netdev->enetaddr)); + macb_writel(macb, SA1B, hwaddr_bottom); + hwaddr_top = cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))); + macb_writel(macb, SA1T, hwaddr_top); + + /* choose RMII or MII mode. This depends on the board */ +#ifdef CONFIG_RMII + macb_writel(macb, USRIO, 0); +#else + macb_writel(macb, USRIO, MACB_BIT(MII)); +#endif + + if (!macb_phy_init(macb)) + return 0; + + /* Enable TX and RX */ + macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE)); + + return 1; +} + +static void macb_halt(struct eth_device *netdev) +{ + struct macb_device *macb = to_macb(netdev); + u32 ncr, tsr; + + /* Halt the controller and wait for any ongoing transmission to end. */ + ncr = macb_readl(macb, NCR); + ncr |= MACB_BIT(THALT); + macb_writel(macb, NCR, ncr); + + do { + tsr = macb_readl(macb, TSR); + } while (tsr & MACB_BIT(TGO)); + + /* Disable TX and RX, and clear statistics */ + macb_writel(macb, NCR, MACB_BIT(CLRSTAT)); +} + +int macb_eth_initialize(int id, void *regs, unsigned int phy_addr) +{ + struct macb_device *macb; + struct eth_device *netdev; + unsigned long macb_hz; + u32 ncfgr; + + macb = malloc(sizeof(struct macb_device)); + if (!macb) { + printf("Error: Failed to allocate memory for MACB%d\n", id); + return -1; + } + memset(macb, 0, sizeof(struct macb_device)); + + netdev = &macb->netdev; + + macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE, + &macb->rx_buffer_dma); + macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE + * sizeof(struct macb_dma_desc), + &macb->rx_ring_dma); + macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE + * sizeof(struct macb_dma_desc), + &macb->tx_ring_dma); + + macb->regs = regs; + macb->phy_addr = phy_addr; + + sprintf(netdev->name, "macb%d", id); + netdev->init = macb_init; + netdev->halt = macb_halt; + netdev->send = macb_send; + netdev->recv = macb_recv; + + /* + * Do some basic initialization so that we at least can talk + * to the PHY + */ + macb_hz = get_macb_pclk_rate(id); + if (macb_hz < 20000000) + ncfgr = MACB_BF(CLK, MACB_CLK_DIV8); + else if (macb_hz < 40000000) + ncfgr = MACB_BF(CLK, MACB_CLK_DIV16); + else if (macb_hz < 80000000) + ncfgr = MACB_BF(CLK, MACB_CLK_DIV32); + else + ncfgr = MACB_BF(CLK, MACB_CLK_DIV64); + + macb_writel(macb, NCFGR, ncfgr); + + eth_register(netdev); + + return 0; +} + +#endif /* (CONFIG_COMMANDS & CFG_CMD_NET) */ + +#if (CONFIG_COMMANDS & CFG_CMD_MII) + +int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value) +{ + unsigned long netctl; + unsigned long netstat; + unsigned long frame; + int iflag; + + iflag = disable_interrupts(); + netctl = macb_readl(&macb, EMACB_NCR); + netctl |= MACB_BIT(MPE); + macb_writel(&macb, EMACB_NCR, netctl); + if (iflag) + enable_interrupts(); + + frame = (MACB_BF(SOF, 1) + | MACB_BF(RW, 2) + | MACB_BF(PHYA, addr) + | MACB_BF(REGA, reg) + | MACB_BF(CODE, 2)); + macb_writel(&macb, EMACB_MAN, frame); + + do { + netstat = macb_readl(&macb, EMACB_NSR); + } while (!(netstat & MACB_BIT(IDLE))); + + frame = macb_readl(&macb, EMACB_MAN); + *value = MACB_BFEXT(DATA, frame); + + iflag = disable_interrupts(); + netctl = macb_readl(&macb, EMACB_NCR); + netctl &= ~MACB_BIT(MPE); + macb_writel(&macb, EMACB_NCR, netctl); + if (iflag) + enable_interrupts(); + + return 0; +} + +int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value) +{ + unsigned long netctl; + unsigned long netstat; + unsigned long frame; + int iflag; + + iflag = disable_interrupts(); + netctl = macb_readl(&macb, EMACB_NCR); + netctl |= MACB_BIT(MPE); + macb_writel(&macb, EMACB_NCR, netctl); + if (iflag) + enable_interrupts(); + + frame = (MACB_BF(SOF, 1) + | MACB_BF(RW, 1) + | MACB_BF(PHYA, addr) + | MACB_BF(REGA, reg) + | MACB_BF(CODE, 2) + | MACB_BF(DATA, value)); + macb_writel(&macb, EMACB_MAN, frame); + + do { + netstat = macb_readl(&macb, EMACB_NSR); + } while (!(netstat & MACB_BIT(IDLE))); + + iflag = disable_interrupts(); + netctl = macb_readl(&macb, EMACB_NCR); + netctl &= ~MACB_BIT(MPE); + macb_writel(&macb, EMACB_NCR, netctl); + if (iflag) + enable_interrupts(); + + return 0; +} + +#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */ + +#endif /* CONFIG_MACB */ diff --git a/drivers/macb.h b/drivers/macb.h new file mode 100644 index 000000000..c778e4ee4 --- /dev/null +++ b/drivers/macb.h @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __DRIVERS_MACB_H__ +#define __DRIVERS_MACB_H__ + +/* MACB register offsets */ +#define MACB_NCR 0x0000 +#define MACB_NCFGR 0x0004 +#define MACB_NSR 0x0008 +#define MACB_TSR 0x0014 +#define MACB_RBQP 0x0018 +#define MACB_TBQP 0x001c +#define MACB_RSR 0x0020 +#define MACB_ISR 0x0024 +#define MACB_IER 0x0028 +#define MACB_IDR 0x002c +#define MACB_IMR 0x0030 +#define MACB_MAN 0x0034 +#define MACB_PTR 0x0038 +#define MACB_PFR 0x003c +#define MACB_FTO 0x0040 +#define MACB_SCF 0x0044 +#define MACB_MCF 0x0048 +#define MACB_FRO 0x004c +#define MACB_FCSE 0x0050 +#define MACB_ALE 0x0054 +#define MACB_DTF 0x0058 +#define MACB_LCOL 0x005c +#define MACB_EXCOL 0x0060 +#define MACB_TUND 0x0064 +#define MACB_CSE 0x0068 +#define MACB_RRE 0x006c +#define MACB_ROVR 0x0070 +#define MACB_RSE 0x0074 +#define MACB_ELE 0x0078 +#define MACB_RJA 0x007c +#define MACB_USF 0x0080 +#define MACB_STE 0x0084 +#define MACB_RLE 0x0088 +#define MACB_TPF 0x008c +#define MACB_HRB 0x0090 +#define MACB_HRT 0x0094 +#define MACB_SA1B 0x0098 +#define MACB_SA1T 0x009c +#define MACB_SA2B 0x00a0 +#define MACB_SA2T 0x00a4 +#define MACB_SA3B 0x00a8 +#define MACB_SA3T 0x00ac +#define MACB_SA4B 0x00b0 +#define MACB_SA4T 0x00b4 +#define MACB_TID 0x00b8 +#define MACB_TPQ 0x00bc +#define MACB_USRIO 0x00c0 +#define MACB_WOL 0x00c4 + +/* Bitfields in NCR */ +#define MACB_LB_OFFSET 0 +#define MACB_LB_SIZE 1 +#define MACB_LLB_OFFSET 1 +#define MACB_LLB_SIZE 1 +#define MACB_RE_OFFSET 2 +#define MACB_RE_SIZE 1 +#define MACB_TE_OFFSET 3 +#define MACB_TE_SIZE 1 +#define MACB_MPE_OFFSET 4 +#define MACB_MPE_SIZE 1 +#define MACB_CLRSTAT_OFFSET 5 +#define MACB_CLRSTAT_SIZE 1 +#define MACB_INCSTAT_OFFSET 6 +#define MACB_INCSTAT_SIZE 1 +#define MACB_WESTAT_OFFSET 7 +#define MACB_WESTAT_SIZE 1 +#define MACB_BP_OFFSET 8 +#define MACB_BP_SIZE 1 +#define MACB_TSTART_OFFSET 9 +#define MACB_TSTART_SIZE 1 +#define MACB_THALT_OFFSET 10 +#define MACB_THALT_SIZE 1 +#define MACB_NCR_TPF_OFFSET 11 +#define MACB_NCR_TPF_SIZE 1 +#define MACB_TZQ_OFFSET 12 +#define MACB_TZQ_SIZE 1 + +/* Bitfields in NCFGR */ +#define MACB_SPD_OFFSET 0 +#define MACB_SPD_SIZE 1 +#define MACB_FD_OFFSET 1 +#define MACB_FD_SIZE 1 +#define MACB_BIT_RATE_OFFSET 2 +#define MACB_BIT_RATE_SIZE 1 +#define MACB_JFRAME_OFFSET 3 +#define MACB_JFRAME_SIZE 1 +#define MACB_CAF_OFFSET 4 +#define MACB_CAF_SIZE 1 +#define MACB_NBC_OFFSET 5 +#define MACB_NBC_SIZE 1 +#define MACB_NCFGR_MTI_OFFSET 6 +#define MACB_NCFGR_MTI_SIZE 1 +#define MACB_UNI_OFFSET 7 +#define MACB_UNI_SIZE 1 +#define MACB_BIG_OFFSET 8 +#define MACB_BIG_SIZE 1 +#define MACB_EAE_OFFSET 9 +#define MACB_EAE_SIZE 1 +#define MACB_CLK_OFFSET 10 +#define MACB_CLK_SIZE 2 +#define MACB_RTY_OFFSET 12 +#define MACB_RTY_SIZE 1 +#define MACB_PAE_OFFSET 13 +#define MACB_PAE_SIZE 1 +#define MACB_RBOF_OFFSET 14 +#define MACB_RBOF_SIZE 2 +#define MACB_RLCE_OFFSET 16 +#define MACB_RLCE_SIZE 1 +#define MACB_DRFCS_OFFSET 17 +#define MACB_DRFCS_SIZE 1 +#define MACB_EFRHD_OFFSET 18 +#define MACB_EFRHD_SIZE 1 +#define MACB_IRXFCS_OFFSET 19 +#define MACB_IRXFCS_SIZE 1 + +/* Bitfields in NSR */ +#define MACB_NSR_LINK_OFFSET 0 +#define MACB_NSR_LINK_SIZE 1 +#define MACB_MDIO_OFFSET 1 +#define MACB_MDIO_SIZE 1 +#define MACB_IDLE_OFFSET 2 +#define MACB_IDLE_SIZE 1 + +/* Bitfields in TSR */ +#define MACB_UBR_OFFSET 0 +#define MACB_UBR_SIZE 1 +#define MACB_COL_OFFSET 1 +#define MACB_COL_SIZE 1 +#define MACB_TSR_RLE_OFFSET 2 +#define MACB_TSR_RLE_SIZE 1 +#define MACB_TGO_OFFSET 3 +#define MACB_TGO_SIZE 1 +#define MACB_BEX_OFFSET 4 +#define MACB_BEX_SIZE 1 +#define MACB_COMP_OFFSET 5 +#define MACB_COMP_SIZE 1 +#define MACB_UND_OFFSET 6 +#define MACB_UND_SIZE 1 + +/* Bitfields in RSR */ +#define MACB_BNA_OFFSET 0 +#define MACB_BNA_SIZE 1 +#define MACB_REC_OFFSET 1 +#define MACB_REC_SIZE 1 +#define MACB_OVR_OFFSET 2 +#define MACB_OVR_SIZE 1 + +/* Bitfields in ISR/IER/IDR/IMR */ +#define MACB_MFD_OFFSET 0 +#define MACB_MFD_SIZE 1 +#define MACB_RCOMP_OFFSET 1 +#define MACB_RCOMP_SIZE 1 +#define MACB_RXUBR_OFFSET 2 +#define MACB_RXUBR_SIZE 1 +#define MACB_TXUBR_OFFSET 3 +#define MACB_TXUBR_SIZE 1 +#define MACB_ISR_TUND_OFFSET 4 +#define MACB_ISR_TUND_SIZE 1 +#define MACB_ISR_RLE_OFFSET 5 +#define MACB_ISR_RLE_SIZE 1 +#define MACB_TXERR_OFFSET 6 +#define MACB_TXERR_SIZE 1 +#define MACB_TCOMP_OFFSET 7 +#define MACB_TCOMP_SIZE 1 +#define MACB_ISR_LINK_OFFSET 9 +#define MACB_ISR_LINK_SIZE 1 +#define MACB_ISR_ROVR_OFFSET 10 +#define MACB_ISR_ROVR_SIZE 1 +#define MACB_HRESP_OFFSET 11 +#define MACB_HRESP_SIZE 1 +#define MACB_PFR_OFFSET 12 +#define MACB_PFR_SIZE 1 +#define MACB_PTZ_OFFSET 13 +#define MACB_PTZ_SIZE 1 + +/* Bitfields in MAN */ +#define MACB_DATA_OFFSET 0 +#define MACB_DATA_SIZE 16 +#define MACB_CODE_OFFSET 16 +#define MACB_CODE_SIZE 2 +#define MACB_REGA_OFFSET 18 +#define MACB_REGA_SIZE 5 +#define MACB_PHYA_OFFSET 23 +#define MACB_PHYA_SIZE 5 +#define MACB_RW_OFFSET 28 +#define MACB_RW_SIZE 2 +#define MACB_SOF_OFFSET 30 +#define MACB_SOF_SIZE 2 + +/* Bitfields in USRIO */ +#define MACB_MII_OFFSET 0 +#define MACB_MII_SIZE 1 +#define MACB_EAM_OFFSET 1 +#define MACB_EAM_SIZE 1 +#define MACB_TX_PAUSE_OFFSET 2 +#define MACB_TX_PAUSE_SIZE 1 +#define MACB_TX_PAUSE_ZERO_OFFSET 3 +#define MACB_TX_PAUSE_ZERO_SIZE 1 + +/* Bitfields in WOL */ +#define MACB_IP_OFFSET 0 +#define MACB_IP_SIZE 16 +#define MACB_MAG_OFFSET 16 +#define MACB_MAG_SIZE 1 +#define MACB_ARP_OFFSET 17 +#define MACB_ARP_SIZE 1 +#define MACB_SA1_OFFSET 18 +#define MACB_SA1_SIZE 1 +#define MACB_WOL_MTI_OFFSET 19 +#define MACB_WOL_MTI_SIZE 1 + +/* Constants for CLK */ +#define MACB_CLK_DIV8 0 +#define MACB_CLK_DIV16 1 +#define MACB_CLK_DIV32 2 +#define MACB_CLK_DIV64 3 + +/* Constants for MAN register */ +#define MACB_MAN_SOF 1 +#define MACB_MAN_WRITE 1 +#define MACB_MAN_READ 2 +#define MACB_MAN_CODE 2 + +/* Bit manipulation macros */ +#define MACB_BIT(name) \ + (1 << MACB_##name##_OFFSET) +#define MACB_BF(name,value) \ + (((value) & ((1 << MACB_##name##_SIZE) - 1)) \ + << MACB_##name##_OFFSET) +#define MACB_BFEXT(name,value)\ + (((value) >> MACB_##name##_OFFSET) \ + & ((1 << MACB_##name##_SIZE) - 1)) +#define MACB_BFINS(name,value,old) \ + (((old) & ~(((1 << MACB_##name##_SIZE) - 1) \ + << MACB_##name##_OFFSET)) \ + | MACB_BF(name,value)) + +/* Register access macros */ +#define macb_readl(port,reg) \ + readl((port)->regs + MACB_##reg) +#define macb_writel(port,reg,value) \ + writel((value), (port)->regs + MACB_##reg) + +#endif /* __DRIVERS_MACB_H__ */ diff --git a/drivers/tsi108_eth.c b/drivers/tsi108_eth.c new file mode 100644 index 000000000..47341bee7 --- /dev/null +++ b/drivers/tsi108_eth.c @@ -0,0 +1,1036 @@ +/*********************************************************************** + * + * Copyright (c) 2005 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Description: + * Ethernet interface for Tundra TSI108 bridge chip + * + ***********************************************************************/ + +#include <config.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \ + && defined(CONFIG_TSI108_ETH) + +#if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2) +#error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2" +#endif + +#include <common.h> +#include <malloc.h> +#include <net.h> +#include <asm/cache.h> + +#ifdef DEBUG +#define TSI108_ETH_DEBUG 7 +#else +#define TSI108_ETH_DEBUG 0 +#endif + +#if TSI108_ETH_DEBUG > 0 +#define debug_lev(lev, fmt, args...) \ +if (lev <= TSI108_ETH_DEBUG) \ +printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args) +#else +#define debug_lev(lev, fmt, args...) do{}while(0) +#endif + +#define RX_PRINT_ERRORS +#define TX_PRINT_ERRORS + +#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000) + +#define ETH_PORT_OFFSET 0x400 + +#define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset)))) + +#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000) +#define MAC_CONFIG_1_TX_ENABLE (0x00000001) +#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002) +#define MAC_CONFIG_1_RX_ENABLE (0x00000004) +#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008) +#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010) +#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020) +#define MAC_CONFIG_1_LOOP_BACK (0x00000100) +#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000) +#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000) +#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000) +#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000) +#define MAC_CONFIG_1_SIM_RESET (0x40000000) +#define MAC_CONFIG_1_SOFT_RESET (0x80000000) + +#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004) +#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001) +#define MAC_CONFIG_2_CRC_ENABLE (0x00000002) +#define MAC_CONFIG_2_PAD_CRC (0x00000004) +#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010) +#define MAC_CONFIG_2_HUGE_FRAME (0x00000020) +#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8) +#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12) +#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */ +#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */ + +#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010) + +#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020) +#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7) +#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010) +#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020) +#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000) + +#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024) +#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001) +#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002) + +#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028) +#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c) +#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030) + +#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034) +#define MII_MGMT_INDICATORS_BUSY (0x00000001) +#define MII_MGMT_INDICATORS_SCAN (0x00000002) +#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004) + +#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c) +#define INTERFACE_STATUS_LINK_FAIL (0x00000008) +#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200) + +#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040) +#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044) + +#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200) +#define PORT_CONTROL_PRI (0x00000001) +#define PORT_CONTROL_BPT (0x00010000) +#define PORT_CONTROL_SPD (0x00040000) +#define PORT_CONTROL_RBC (0x00080000) +#define PORT_CONTROL_PRB (0x00200000) +#define PORT_CONTROL_DIS (0x00400000) +#define PORT_CONTROL_TBI (0x00800000) +#define PORT_CONTROL_STE (0x10000000) +#define PORT_CONTROL_ZOR (0x20000000) +#define PORT_CONTROL_CLR (0x40000000) +#define PORT_CONTROL_SRT (0x80000000) + +#define reg_TX_CONFIG(base) __REG32(base, 0x00000220) +#define TX_CONFIG_START_Q (0x00000003) +#define TX_CONFIG_EHP (0x00400000) +#define TX_CONFIG_CHP (0x00800000) +#define TX_CONFIG_RST (0x80000000) + +#define reg_TX_CONTROL(base) __REG32(base, 0x00000224) +#define TX_CONTROL_GO (0x00008000) +#define TX_CONTROL_MP (0x01000000) +#define TX_CONTROL_EAI (0x20000000) +#define TX_CONTROL_ABT (0x40000000) +#define TX_CONTROL_EII (0x80000000) + +#define reg_TX_STATUS(base) __REG32(base, 0x00000228) +#define TX_STATUS_QUEUE_USABLE (0x0000000f) +#define TX_STATUS_CURR_Q (0x00000300) +#define TX_STATUS_ACT (0x00008000) +#define TX_STATUS_QUEUE_IDLE (0x000f0000) +#define TX_STATUS_EOQ_PENDING (0x0f000000) + +#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c) +#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f) +#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00) +#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) +#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) + +#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230) + +#define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270) +#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) +#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000) +#define TX_DIAGNOSTIC_ADDR_AI (0x80000000) + +#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274) + +#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278) +#define TX_ERROR_STATUS (0x00000278) +#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010) +#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020) +#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040) +#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080) +#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000) +#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000) +#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000) + +#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280) +#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) +#define TX_QUEUE_0_CONFIG_BSWP (0x00000400) +#define TX_QUEUE_0_CONFIG_WSWP (0x00000800) +#define TX_QUEUE_0_CONFIG_AM (0x00004000) +#define TX_QUEUE_0_CONFIG_GVI (0x00008000) +#define TX_QUEUE_0_CONFIG_EEI (0x00010000) +#define TX_QUEUE_0_CONFIG_ELI (0x00020000) +#define TX_QUEUE_0_CONFIG_ENI (0x00040000) +#define TX_QUEUE_0_CONFIG_ESI (0x00080000) +#define TX_QUEUE_0_CONFIG_EDI (0x00100000) + +#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284) +#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) +#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) +#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) +#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) + +#define OCN_PORT_HLP 0 /* HLP Interface */ +#define OCN_PORT_PCI_X 1 /* PCI-X Interface */ +#define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */ +#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */ +#define OCN_PORT_MEMORY 4 /* Memory Controller */ +#define OCN_PORT_DMA 5 /* DMA Controller */ +#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */ +#define OCN_PORT_PRINT 7 /* Print Engine Interface */ + +#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288) + +#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c) +#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000) + +#define reg_RX_CONFIG(base) __REG32(base, 0x00000320) +#define RX_CONFIG_DEF_Q (0x00000003) +#define RX_CONFIG_EMF (0x00000100) +#define RX_CONFIG_EUF (0x00000200) +#define RX_CONFIG_BFE (0x00000400) +#define RX_CONFIG_MFE (0x00000800) +#define RX_CONFIG_UFE (0x00001000) +#define RX_CONFIG_SE (0x00002000) +#define RX_CONFIG_ABF (0x00200000) +#define RX_CONFIG_APE (0x00400000) +#define RX_CONFIG_CHP (0x00800000) +#define RX_CONFIG_RST (0x80000000) + +#define reg_RX_CONTROL(base) __REG32(base, 0x00000324) +#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f) +#define GE_E0_RX_CONTROL_GO (0x00008000) +#define GE_E0_RX_CONTROL_EAI (0x20000000) +#define GE_E0_RX_CONTROL_ABT (0x40000000) +#define GE_E0_RX_CONTROL_EII (0x80000000) + +#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c) +#define RX_EXTENDED_STATUS (0x0000032c) +#define RX_EXTENDED_STATUS_EOQ (0x0000000f) +#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001) +#define RX_EXTENDED_STATUS_EOF (0x00000f00) +#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) +#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) + +#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330) + +#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370) +#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) +#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000) +#define RX_DIAGNOSTIC_ADDR_AI (0x80000000) + +#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374) + +#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380) +#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) +#define RX_QUEUE_0_CONFIG_BSWP (0x00000400) +#define RX_QUEUE_0_CONFIG_WSWP (0x00000800) +#define RX_QUEUE_0_CONFIG_AM (0x00004000) +#define RX_QUEUE_0_CONFIG_EEI (0x00010000) +#define RX_QUEUE_0_CONFIG_ELI (0x00020000) +#define RX_QUEUE_0_CONFIG_ENI (0x00040000) +#define RX_QUEUE_0_CONFIG_ESI (0x00080000) +#define RX_QUEUE_0_CONFIG_EDI (0x00100000) + +#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384) +#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) +#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) +#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) +#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) + +#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388) + +#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c) +#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000) + +/* + * PHY register definitions + */ +/* the first 15 PHY registers are standard. */ +#define PHY_CTRL_REG 0 /* Control Register */ +#define PHY_STATUS_REG 1 /* Status Regiser */ +#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */ +#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */ +#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */ +#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */ + +/* + * PHY Register bit masks. + */ +#define PHY_CTRL_RESET (1 << 15) +#define PHY_CTRL_LOOPBACK (1 << 14) +#define PHY_CTRL_SPEED0 (1 << 13) +#define PHY_CTRL_AN_EN (1 << 12) +#define PHY_CTRL_PWR_DN (1 << 11) +#define PHY_CTRL_ISOLATE (1 << 10) +#define PHY_CTRL_RESTART_AN (1 << 9) +#define PHY_CTRL_FULL_DUPLEX (1 << 8) +#define PHY_CTRL_CT_EN (1 << 7) +#define PHY_CTRL_SPEED1 (1 << 6) + +#define PHY_STAT_100BASE_T4 (1 << 15) +#define PHY_STAT_100BASE_X_FD (1 << 14) +#define PHY_STAT_100BASE_X_HD (1 << 13) +#define PHY_STAT_10BASE_T_FD (1 << 12) +#define PHY_STAT_10BASE_T_HD (1 << 11) +#define PHY_STAT_100BASE_T2_FD (1 << 10) +#define PHY_STAT_100BASE_T2_HD (1 << 9) +#define PHY_STAT_EXT_STAT (1 << 8) +#define PHY_STAT_RESERVED (1 << 7) +#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */ +#define PHY_STAT_AN_COMPLETE (1 << 5) +#define PHY_STAT_REM_FAULT (1 << 4) +#define PHY_STAT_AN_CAP (1 << 3) +#define PHY_STAT_LINK_UP (1 << 2) +#define PHY_STAT_JABBER (1 << 1) +#define PHY_STAT_EXT_CAP (1 << 0) + +#define TBI_CONTROL_2 0x11 +#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001 +#define TBI_CONTROL_2_ENABLE_WRAP 0x0002 +#define TBI_CONTROL_2_G_MII_MODE 0x0010 +#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020 +#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100 +#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000 +#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000 +#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000 +#define TBI_CONTROL_2_SOFT_RESET 0x8000 + +/* marvel specific */ +#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */ +#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */ +#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */ + +/* + * MARVELL 88E1111 PHY register bit masks + */ +/* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */ + +#define SPEC_STAT_SPEED_MASK (3 << 14) +#define SPEC_STAT_FULL_DUP (1 << 13) +#define SPEC_STAT_PAGE_RCVD (1 << 12) +#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */ +#define SPEC_STAT_LINK_UP (1 << 10) +#define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */ +#define SPEC_STAT_MDIX (1 << 6) +#define SPEC_STAT_POLARITY (1 << 1) +#define SPEC_STAT_JABBER (1 << 0) + +#define SPEED_1000 (2 << 14) +#define SPEED_100 (1 << 14) +#define SPEED_10 (0 << 14) + +#define TBI_ADDR 0x1E /* Ten Bit Interface address */ + +/* negotiated link parameters */ +#define LINK_SPEED_UNKNOWN 0 +#define LINK_SPEED_10 1 +#define LINK_SPEED_100 2 +#define LINK_SPEED_1000 3 + +#define LINK_DUPLEX_UNKNOWN 0 +#define LINK_DUPLEX_HALF 1 +#define LINK_DUPLEX_FULL 2 + +static unsigned int phy_address[] = { 8, 9 }; + +#define vuint32 volatile u32 + +/* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte) + * This structure is accessed by the ethernet DMA engine which means it + * MUST be in LITTLE ENDIAN format */ +struct dma_descriptor { + vuint32 start_addr0; /* buffer address, least significant bytes. */ + vuint32 start_addr1; /* buffer address, most significant bytes. */ + vuint32 next_descr_addr0;/* next descriptor address, least significant bytes. Must be 64-bit aligned. */ + vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */ + vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */ + vuint32 config_status; /* Configuration/Status. */ + vuint32 reserved1; /* reserved to make the descriptor cache line aligned. */ + vuint32 reserved2; /* reserved to make the descriptor cache line aligned. */ +}; + +/* last next descriptor address flag */ +#define DMA_DESCR_LAST (1 << 31) + +/* TX DMA descriptor config status bits */ +#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */ +#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */ +#define DMA_DESCR_TX_PFVLAN (1 << 2) +#define DMA_DESCR_TX_HUGE (1 << 3) +#define DMA_DESCR_TX_PAD (1 << 4) +#define DMA_DESCR_TX_CRC (1 << 5) +#define DMA_DESCR_TX_DESCR_INT (1 << 14) +#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000 +#define DMA_DESCR_TX_ONE_COLLISION (1 << 20) +#define DMA_DESCR_TX_LATE_COLLISION (1 << 24) +#define DMA_DESCR_TX_UNDERRUN (1 << 25) +#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26) +#define DMA_DESCR_TX_OK (1 << 30) +#define DMA_DESCR_TX_OWNER (1 << 31) + +/* RX DMA descriptor status bits */ +#define DMA_DESCR_RX_EOF (1 << 0) +#define DMA_DESCR_RX_SOF (1 << 1) +#define DMA_DESCR_RX_VTF (1 << 2) +#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3) +#define DMA_DESCR_RX_SHORT_FRAME (1 << 4) +#define DMA_DESCR_RX_HASH_MATCH (1 << 7) +#define DMA_DESCR_RX_BAD_FRAME (1 << 8) +#define DMA_DESCR_RX_OVERRUN (1 << 9) +#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11) +#define DMA_DESCR_RX_CRC_ERROR (1 << 12) +#define DMA_DESCR_RX_DESCR_INT (1 << 13) +#define DMA_DESCR_RX_OWNER (1 << 15) + +#define RX_BUFFER_SIZE PKTSIZE +#define NUM_RX_DESC PKTBUFSRX + +static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32))); + +static struct dma_descriptor rx_descr_array[NUM_RX_DESC] + __attribute__ ((aligned(32))); + +static struct dma_descriptor *rx_descr_current; + +static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis); +static int tsi108_eth_send (struct eth_device *dev, + volatile void *packet, int length); +static int tsi108_eth_recv (struct eth_device *dev); +static void tsi108_eth_halt (struct eth_device *dev); +static unsigned int read_phy (unsigned int base, + unsigned int phy_addr, unsigned int phy_reg); +static void write_phy (unsigned int base, + unsigned int phy_addr, + unsigned int phy_reg, unsigned int phy_data); + +#if TSI108_ETH_DEBUG > 100 +/* + * print phy debug infomation + */ +static void dump_phy_regs (unsigned int phy_addr) +{ + int i; + + printf ("PHY %d registers\n", phy_addr); + for (i = 0; i <= 30; i++) { + printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i)); + } + printf ("\n"); + +} +#else +#define dump_phy_regs(base) do{}while(0) +#endif + +#if TSI108_ETH_DEBUG > 100 +/* + * print debug infomation + */ +static void tx_diag_regs (unsigned int base) +{ + int i; + unsigned long dummy; + + printf ("TX diagnostics registers\n"); + reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI; + udelay (1000); + dummy = reg_TX_DIAGNOSTIC_DATA(base); + for (i = 0x00; i <= 0x05; i++) { + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); + } + reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI; + udelay (1000); + dummy = reg_TX_DIAGNOSTIC_DATA(base); + for (i = 0x40; i <= 0x47; i++) { + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); + } + printf ("\n"); + +} +#else +#define tx_diag_regs(base) do{}while(0) +#endif + +#if TSI108_ETH_DEBUG > 100 +/* + * print debug infomation + */ +static void rx_diag_regs (unsigned int base) +{ + int i; + unsigned long dummy; + + printf ("RX diagnostics registers\n"); + reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI; + udelay (1000); + dummy = reg_RX_DIAGNOSTIC_DATA(base); + for (i = 0x00; i <= 0x05; i++) { + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); + } + reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI; + udelay (1000); + dummy = reg_RX_DIAGNOSTIC_DATA(base); + for (i = 0x08; i <= 0x0a; i++) { + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); + } + printf ("\n"); + +} +#else +#define rx_diag_regs(base) do{}while(0) +#endif + +#if TSI108_ETH_DEBUG > 100 +/* + * print debug infomation + */ +static void debug_mii_regs (unsigned int base) +{ + printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base)); + printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base)); + printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base)); + printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base)); + printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base)); + printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base)); + printf ("\n"); + +} +#else +#define debug_mii_regs(base) do{}while(0) +#endif + +/* + * Wait until the phy bus is non-busy + */ +static void phy_wait (unsigned int base, unsigned int condition) +{ + int timeout; + + timeout = 0; + while (reg_MII_MGMT_INDICATORS(base) & condition) { + udelay (10); + if (++timeout > 10000) { + printf ("ERROR: timeout waiting for phy bus (%d)\n", + condition); + break; + } + } +} + +/* + * read phy register + */ +static unsigned int read_phy (unsigned int base, + unsigned int phy_addr, unsigned int phy_reg) +{ + unsigned int value; + + phy_wait (base, MII_MGMT_INDICATORS_BUSY); + + reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; + + /* Ensure that the Read Cycle bit is cleared prior to next read cycle */ + reg_MII_MGMT_COMMAND(base) = 0; + + /* start the read */ + reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE; + + /* wait for the read to complete */ + phy_wait (base, + MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY); + + value = reg_MII_MGMT_STATUS(base); + + reg_MII_MGMT_COMMAND(base) = 0; + + return value; +} + +/* + * write phy register + */ +static void write_phy (unsigned int base, + unsigned int phy_addr, + unsigned int phy_reg, unsigned int phy_data) +{ + phy_wait (base, MII_MGMT_INDICATORS_BUSY); + + reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; + + /* Ensure that the Read Cycle bit is cleared prior to next cycle */ + reg_MII_MGMT_COMMAND(base) = 0; + + /* start the write */ + reg_MII_MGMT_CONTROL(base) = phy_data; +} + +/* + * configure the marvell 88e1111 phy + */ +static int marvell_88e_phy_config (struct eth_device *dev, int *speed, + int *duplex) +{ + unsigned long base; + unsigned long phy_addr; + unsigned int phy_status; + unsigned int phy_spec_status; + int timeout; + int phy_speed; + int phy_duplex; + unsigned int value; + + phy_speed = LINK_SPEED_UNKNOWN; + phy_duplex = LINK_DUPLEX_UNKNOWN; + + base = dev->iobase; + phy_addr = (unsigned long)dev->priv; + + /* Take the PHY out of reset. */ + write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET); + + /* Wait for the reset process to complete. */ + udelay (10); + timeout = 0; + while ((phy_status = + read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) { + udelay (10); + if (++timeout > 10000) { + printf ("ERROR: timeout waiting for phy reset\n"); + break; + } + } + + /* TBI Configuration. */ + write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE | + TBI_CONTROL_2_RECEIVE_CLOCK_SELECT); + /* Wait for the link to be established. */ + timeout = 0; + do { + udelay (20000); + phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG); + if (++timeout > 100) { + debug_lev(1, "ERROR: unable to establish link!!!\n"); + break; + } + } while ((phy_status & PHY_STAT_LINK_UP) == 0); + + if ((phy_status & PHY_STAT_LINK_UP) == 0) + return 0; + + value = 0; + phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); + if (phy_spec_status & SPEC_STAT_RESOLVED) { + switch (phy_spec_status & SPEC_STAT_SPEED_MASK) { + case SPEED_1000: + phy_speed = LINK_SPEED_1000; + value |= PHY_CTRL_SPEED1; + break; + case SPEED_100: + phy_speed = LINK_SPEED_100; + value |= PHY_CTRL_SPEED0; + break; + case SPEED_10: + phy_speed = LINK_SPEED_10; + break; + } + if (phy_spec_status & SPEC_STAT_FULL_DUP) { + phy_duplex = LINK_DUPLEX_FULL; + value |= PHY_CTRL_FULL_DUPLEX; + } else + phy_duplex = LINK_DUPLEX_HALF; + } + /* set TBI speed */ + write_phy (base, TBI_ADDR, PHY_CTRL_REG, value); + write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060); + +#if TSI108_ETH_DEBUG > 0 + printf ("%s link is up", dev->name); + phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); + if (phy_spec_status & SPEC_STAT_RESOLVED) { + switch (phy_speed) { + case LINK_SPEED_1000: + printf (", 1000 Mbps"); + break; + case LINK_SPEED_100: + printf (", 100 Mbps"); + break; + case LINK_SPEED_10: + printf (", 10 Mbps"); + break; + } + if (phy_duplex == LINK_DUPLEX_FULL) + printf (", Full duplex"); + else + printf (", Half duplex"); + } + printf ("\n"); +#endif + + dump_phy_regs (TBI_ADDR); + if (speed) + *speed = phy_speed; + if (duplex) + *duplex = phy_duplex; + + return 1; +} + +/* + * External interface + * + * register the tsi108 ethernet controllers with the multi-ethernet system + */ +int tsi108_eth_initialize (bd_t * bis) +{ + struct eth_device *dev; + int index; + + for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) { + dev = (struct eth_device *)malloc(sizeof(struct eth_device)); + + sprintf (dev->name, "TSI108_eth%d", index); + + dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET); + dev->priv = (void *)(phy_address[index]); + dev->init = tsi108_eth_probe; + dev->halt = tsi108_eth_halt; + dev->send = tsi108_eth_send; + dev->recv = tsi108_eth_recv; + + eth_register(dev); + } + return index; +} + +/* + * probe for and initialize a single ethernet interface + */ +static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis) +{ + unsigned long base; + unsigned long value; + int index; + struct dma_descriptor *tx_descr; + struct dma_descriptor *rx_descr; + int speed; + int duplex; + + base = dev->iobase; + + reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT; + + /* Bring DMA/FIFO out of reset. */ + reg_TX_CONFIG(base) = 0x00000000; + reg_RX_CONFIG(base) = 0x00000000; + + reg_TX_THRESHOLDS(base) = (192 << 16) | 192; + reg_RX_THRESHOLDS(base) = (192 << 16) | 112; + + /* Bring MAC out of reset. */ + reg_MAC_CONFIG_1(base) = 0x00000000; + + /* DMA MAC configuration. */ + reg_MAC_CONFIG_1(base) = + MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE; + + reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE; + reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE; + + /* Note: Early tsi108 manual did not have correct byte order + * for the station address.*/ + reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) | + (dev->enetaddr[4] << 16) | + (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0); + + reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) | + (dev->enetaddr[0] << 16); + + if (marvell_88e_phy_config(dev, &speed, &duplex) == 0) + return 0; + + value = + MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC | + MAC_CONFIG_2_CRC_ENABLE; + if (speed == LINK_SPEED_1000) + value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE); + else { + value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE); + reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD; + } + if (duplex == LINK_DUPLEX_FULL) { + value |= MAC_CONFIG_2_FULL_DUPLEX; + reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT; + } else + reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT; + reg_MAC_CONFIG_2(base) = value; + + reg_RX_CONFIG(base) = RX_CONFIG_SE; + reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY; + reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY; + + /* initialize the RX DMA descriptors */ + rx_descr = &rx_descr_array[0]; + rx_descr_current = rx_descr; + for (index = 0; index < NUM_RX_DESC; index++) { + /* make sure the receive buffers are not in cache */ + invalidate_dcache_range((unsigned long)NetRxPackets[index], + (unsigned long)NetRxPackets[index] + + RX_BUFFER_SIZE); + rx_descr->start_addr0 = + cpu_to_le32((vuint32) NetRxPackets[index]); + rx_descr->start_addr1 = 0; + rx_descr->next_descr_addr0 = + cpu_to_le32((vuint32) (rx_descr + 1)); + rx_descr->next_descr_addr1 = 0; + rx_descr->vlan_byte_count = 0; + rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) | + DMA_DESCR_RX_OWNER); + rx_descr++; + } + rx_descr--; + rx_descr->next_descr_addr0 = 0; + rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); + /* Push the descriptors to RAM so the ethernet DMA can see them */ + invalidate_dcache_range((unsigned long)rx_descr_array, + (unsigned long)rx_descr_array + + sizeof(rx_descr_array)); + + /* enable RX queue */ + reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01; + reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current; + /* enable receive DMA */ + reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID; + + reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY; + reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY; + + /* initialize the TX DMA descriptor */ + tx_descr = &tx_descriptor; + + tx_descr->start_addr0 = 0; + tx_descr->start_addr1 = 0; + tx_descr->next_descr_addr0 = 0; + tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); + tx_descr->vlan_byte_count = 0; + tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK | + DMA_DESCR_TX_SOF | + DMA_DESCR_TX_EOF); + /* enable TX queue */ + reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01; + + return 1; +} + +/* + * send a packet + */ +static int tsi108_eth_send (struct eth_device *dev, + volatile void *packet, int length) +{ + unsigned long base; + int timeout; + struct dma_descriptor *tx_descr; + unsigned long status; + + base = dev->iobase; + tx_descr = &tx_descriptor; + + /* Wait until the last packet has been transmitted. */ + timeout = 0; + do { + /* make sure we see the changes made by the DMA engine */ + invalidate_dcache_range((unsigned long)tx_descr, + (unsigned long)tx_descr + + sizeof(struct dma_descriptor)); + + if (timeout != 0) + udelay (15); + if (++timeout > 10000) { + tx_diag_regs(base); + debug_lev(1, + "ERROR: timeout waiting for last transmit packet to be sent\n"); + return 0; + } + } while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER)); + + status = le32_to_cpu(tx_descr->config_status); + if ((status & DMA_DESCR_TX_OK) == 0) { +#ifdef TX_PRINT_ERRORS + printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status, + status & DMA_DESCR_TX_OK ? "tx error, " : "", + status & DMA_DESCR_TX_RETRY_LIMIT ? + "retry limit reached, " : "", + status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "", + status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, " + : ""); +#endif + } + + debug_lev (9, "sending packet %d\n", length); + tx_descr->start_addr0 = cpu_to_le32((vuint32) packet); + tx_descr->start_addr1 = 0; + tx_descr->next_descr_addr0 = 0; + tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); + tx_descr->vlan_byte_count = cpu_to_le32(length); + tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER | + DMA_DESCR_TX_CRC | + DMA_DESCR_TX_PAD | + DMA_DESCR_TX_SOF | + DMA_DESCR_TX_EOF); + + invalidate_dcache_range((unsigned long)tx_descr, + (unsigned long)tx_descr + + sizeof(struct dma_descriptor)); + + invalidate_dcache_range((unsigned long)packet, + (unsigned long)packet + length); + + reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr; + reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID; + + return length; +} + +/* + * Check for received packets and send them up the protocal stack + */ +static int tsi108_eth_recv (struct eth_device *dev) +{ + struct dma_descriptor *rx_descr; + unsigned long base; + int length = 0; + unsigned long status; + volatile uchar *buffer; + + base = dev->iobase; + + /* make sure we see the changes made by the DMA engine */ + invalidate_dcache_range ((unsigned long)rx_descr_array, + (unsigned long)rx_descr_array + + sizeof(rx_descr_array)); + + /* process all of the received packets */ + rx_descr = rx_descr_current; + while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) { + /* check for error */ + status = le32_to_cpu(rx_descr->config_status); + if (status & DMA_DESCR_RX_BAD_FRAME) { +#ifdef RX_PRINT_ERRORS + printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n", + status, + status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, " + : "", + status & DMA_DESCR_RX_SHORT_FRAME ? "too short, " + : "", + status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " : + "", + status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "", + status & DMA_DESCR_RX_MAX_FRAME_LEN ? + "max length, " : "", + status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " : + ""); +#endif + } else { + length = + le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF; + + /*** process packet ***/ + buffer = + (volatile uchar + *)(le32_to_cpu (rx_descr->start_addr0)); + NetReceive (buffer, length); + + invalidate_dcache_range ((unsigned long)buffer, + (unsigned long)buffer + + RX_BUFFER_SIZE); + } + /* Give this buffer back to the DMA engine */ + rx_descr->vlan_byte_count = 0; + rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) | + DMA_DESCR_RX_OWNER); + /* move descriptor pointer forward */ + rx_descr = + (struct dma_descriptor + *)(le32_to_cpu (rx_descr->next_descr_addr0)); + if (rx_descr == 0) + rx_descr = &rx_descr_array[0]; + } + /* remember where we are for next time */ + rx_descr_current = rx_descr; + + /* If the DMA engine has reached the end of the queue + * start over at the begining */ + if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) { + + reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0; + reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0]; + reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID; + } + + return length; +} + +/* + * disable an ethernet interface + */ +static void tsi108_eth_halt (struct eth_device *dev) +{ + unsigned long base; + + base = dev->iobase; + + /* Put DMA/FIFO into reset state. */ + reg_TX_CONFIG(base) = TX_CONFIG_RST; + reg_RX_CONFIG(base) = RX_CONFIG_RST; + + /* Put MAC into reset state. */ + reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET; +} + +#endif diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c new file mode 100644 index 000000000..eb52cb66c --- /dev/null +++ b/drivers/tsi108_i2c.c @@ -0,0 +1,283 @@ +/* + * (C) Copyright 2004 Tundra Semiconductor Corp. + * Author: Alex Bounine + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <config.h> +#include <common.h> + +#ifdef CONFIG_TSI108_I2C +#include <tsi108.h> + +#if (CONFIG_COMMANDS & CFG_CMD_I2C) + +#define I2C_DELAY 100000 +#undef DEBUG_I2C + +#ifdef DEBUG_I2C +#define DPRINT(x) printf (x) +#else +#define DPRINT(x) +#endif + +/* All functions assume that Tsi108 I2C block is the only master on the bus */ +/* I2C read helper function */ + +static int i2c_read_byte ( + uint i2c_chan, /* I2C channel number: 0 - main, 1 - SDC SPD */ + uchar chip_addr,/* I2C device address on the bus */ + uint byte_addr, /* Byte address within I2C device */ + uchar * buffer /* pointer to data buffer */ + ) +{ + u32 temp; + u32 to_count = I2C_DELAY; + u32 op_status = TSI108_I2C_TIMEOUT_ERR; + u32 chan_offset = TSI108_I2C_OFFSET; + + DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n", + i2c_chan, chip_addr, byte_addr)); + + if (0 != i2c_chan) + chan_offset = TSI108_I2C_SDRAM_OFFSET; + + /* Check if I2C operation is in progress */ + temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2); + + if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | + I2C_CNTRL2_START))) { + /* Set device address and operation (read = 0) */ + temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) | + ((chip_addr >> 3) & 0x0F); + *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) = + temp; + + /* Issue the read command + * (at this moment all other parameters are 0 + * (size = 1 byte, lane = 0) + */ + + *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) = + (I2C_CNTRL2_START); + + /* Wait until operation completed */ + do { + /* Read I2C operation status */ + temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2); + + if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) { + if (0 == (temp & + (I2C_CNTRL2_I2C_CFGERR | + I2C_CNTRL2_I2C_TO_ERR)) + ) { + op_status = TSI108_I2C_SUCCESS; + + temp = *(u32 *) (CFG_TSI108_CSR_BASE + + chan_offset + + I2C_RD_DATA); + + *buffer = (u8) (temp & 0xFF); + } else { + /* report HW error */ + op_status = TSI108_I2C_IF_ERROR; + + DPRINT (("I2C HW error reported: 0x%02x\n", temp)); + } + + break; + } + } while (to_count--); + } else { + op_status = TSI108_I2C_IF_BUSY; + + DPRINT (("I2C Transaction start failed: 0x%02x\n", temp)); + } + + DPRINT (("I2C read_byte() status: 0x%02x\n", op_status)); + return op_status; +} + +/* + * I2C Read interface as defined in "include/i2c.h" : + * chip_addr: I2C chip address, range 0..127 + * (to read from SPD channel EEPROM use (0xD0 ... 0xD7) + * NOTE: The bit 7 in the chip_addr serves as a channel select. + * This hack is for enabling "isdram" command on Tsi108 boards + * without changes to common code. Used for I2C reads only. + * byte_addr: Memory or register address within the chip + * alen: Number of bytes to use for addr (typically 1, 2 for larger + * memories, 0 for register type devices with only one + * register) + * buffer: Pointer to destination buffer for data to be read + * len: How many bytes to read + * + * Returns: 0 on success, not 0 on failure + */ + +int i2c_read (uchar chip_addr, uint byte_addr, int alen, + uchar * buffer, int len) +{ + u32 op_status = TSI108_I2C_PARAM_ERR; + u32 i2c_if = 0; + + /* Hack to support second (SPD) I2C controller (SPD EEPROM read only).*/ + if (0xD0 == (chip_addr & ~0x07)) { + i2c_if = 1; + chip_addr &= 0x7F; + } + /* Check for valid I2C address */ + if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) { + while (len--) { + op_status = i2c_read_byte(i2c_if, chip_addr, byte_addr++, buffer++); + + if (TSI108_I2C_SUCCESS != op_status) { + DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len)); + + break; + } + } + } + + DPRINT (("I2C read() status: 0x%02x\n", op_status)); + return op_status; +} + +/* I2C write helper function */ + +static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */ + uint byte_addr, /* Byte address within I2C device */ + uchar * buffer /* pointer to data buffer */ + ) +{ + u32 temp; + u32 to_count = I2C_DELAY; + u32 op_status = TSI108_I2C_TIMEOUT_ERR; + + /* Check if I2C operation is in progress */ + temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2); + + if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) { + /* Place data into the I2C Tx Register */ + *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + + I2C_TX_DATA) = (u32) * buffer; + + /* Set device address and operation */ + temp = + I2C_CNTRL1_I2CWRITE | (byte_addr << 16) | + ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F); + *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + + I2C_CNTRL1) = temp; + + /* Issue the write command (at this moment all other parameters + * are 0 (size = 1 byte, lane = 0) + */ + + *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + + I2C_CNTRL2) = (I2C_CNTRL2_START); + + op_status = TSI108_I2C_TIMEOUT_ERR; + + /* Wait until operation completed */ + do { + /* Read I2C operation status */ + temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2); + + if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) { + if (0 == (temp & + (I2C_CNTRL2_I2C_CFGERR | + I2C_CNTRL2_I2C_TO_ERR))) { + op_status = TSI108_I2C_SUCCESS; + } else { + /* report detected HW error */ + op_status = TSI108_I2C_IF_ERROR; + + DPRINT (("I2C HW error reported: 0x%02x\n", temp)); + } + + break; + } + + } while (to_count--); + } else { + op_status = TSI108_I2C_IF_BUSY; + + DPRINT (("I2C Transaction start failed: 0x%02x\n", temp)); + } + + return op_status; +} + +/* + * I2C Write interface as defined in "include/i2c.h" : + * chip_addr: I2C chip address, range 0..127 + * byte_addr: Memory or register address within the chip + * alen: Number of bytes to use for addr (typically 1, 2 for larger + * memories, 0 for register type devices with only one + * register) + * buffer: Pointer to data to be written + * len: How many bytes to write + * + * Returns: 0 on success, not 0 on failure + */ + +int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer, + int len) +{ + u32 op_status = TSI108_I2C_PARAM_ERR; + + /* Check for valid I2C address */ + if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) { + while (len--) { + op_status = + i2c_write_byte (chip_addr, byte_addr++, buffer++); + + if (TSI108_I2C_SUCCESS != op_status) { + DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len)); + + break; + } + } + } + + return op_status; +} + +/* + * I2C interface function as defined in "include/i2c.h". + * Probe the given I2C chip address by reading single byte from offset 0. + * Returns 0 if a chip responded, not 0 on failure. + */ + +int i2c_probe (uchar chip) +{ + u32 tmp; + + /* + * Try to read the first location of the chip. + * The Tsi108 HW doesn't support sending just the chip address + * and checkong for an <ACK> back. + */ + return i2c_read (chip, 0, 1, (char *)&tmp, 1); +} + +#endif /* (CONFIG_COMMANDS & CFG_CMD_I2C) */ +#endif /* CONFIG_TSI108_I2C */ diff --git a/drivers/tsi108_pci.c b/drivers/tsi108_pci.c new file mode 100644 index 000000000..9f606df51 --- /dev/null +++ b/drivers/tsi108_pci.c @@ -0,0 +1,178 @@ +/* + * (C) Copyright 2004 Tundra Semiconductor Corp. + * Alex Bounine <alexandreb@tundra.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI initialisation for the Tsi108 EMU board. + */ + +#include <config.h> + +#ifdef CONFIG_TSI108_PCI + +#include <common.h> +#include <pci.h> +#include <asm/io.h> +#include <tsi108.h> + +struct pci_controller local_hose; + +void tsi108_clear_pci_error (void) +{ + u32 err_stat, err_addr, pci_stat; + + /* + * Quietly clear errors signalled as result of PCI/X configuration read + * requests. + */ + /* Read PB Error Log Registers */ + err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_ERRCS); + err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_AERR); + if (err_stat & PB_ERRCS_ES) { + /* Clear PCI/X bus errors if applicable */ + if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) { + /* Clear error flag */ + *(u32 *) (CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_ERRCS) = + PB_ERRCS_ES; + + /* Clear read error reported in PB_ISR */ + *(u32 *) (CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_ISR) = + PB_ISR_PBS_RD_ERR; + + /* Clear errors reported by PCI CSR (Normally Master Abort) */ + pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + + PCI_CSR); + *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_CSR) = + pci_stat; + + *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + + PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR; + } + } + + return; +} + +unsigned int __get_pci_config_dword (u32 addr) +{ + unsigned int retval; + + __asm__ __volatile__ (" lwbrx %0,0,%1\n" + "1: eieio\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: li %0,-1\n" + " b 2b\n" + ".section __ex_table,\"a\"\n" + " .align 2\n" + " .long 1b,3b\n" + ".text":"=r"(retval):"r"(addr)); + + return (retval); +} + +static int tsi108_read_config_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + dev &= (CFG_PCI_CFG_SIZE - 1); + dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); + *value = __get_pci_config_dword(dev); + if (0xFFFFFFFF == *value) + tsi108_clear_pci_error (); + return 0; +} + +static int tsi108_write_config_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + dev &= (CFG_PCI_CFG_SIZE - 1); + dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); + + out_le32 ((volatile unsigned *)dev, value); + + return 0; +} + +void pci_init_board (void) +{ + struct pci_controller *hose = (struct pci_controller *)&local_hose; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_set_region (hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* PCI memory space */ + pci_set_region (hose->regions + 1, + CFG_PCI_MEM_BUS, + CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM); + + /* PCI I/O space */ + pci_set_region (hose->regions + 2, + CFG_PCI_IO_BUS, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + hose->region_count = 3; + + pci_set_ops (hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + tsi108_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + tsi108_write_config_dword); + + pci_register_hose (hose); + + hose->last_busno = pci_hose_scan (hose); + + debug ("Done PCI initialization\n"); + return; +} + +#ifdef CONFIG_OF_FLAT_TREE +void +ft_pci_setup (void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len); + if (p != NULL) { + p[0] = local_hose.first_busno; + p[1] = local_hose.last_busno; + } + +} +#endif + +#endif /* CONFIG_TSI108_PCI */ diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h index 33e396a06..ba73bae9e 100644 --- a/include/74xx_7xx.h +++ b/include/74xx_7xx.h @@ -111,7 +111,7 @@ typedef enum __cpu_t { CPU_750CX, CPU_750FX, CPU_750GX, CPU_7400, CPU_7410, - CPU_7448, + CPU_7447A, CPU_7448, CPU_7450, CPU_7455, CPU_7457, CPU_UNKNOWN} cpu_t; diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap7000/clk.h new file mode 100644 index 000000000..7e20d97b7 --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/clk.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_CLK_H__ +#define __ASM_AVR32_ARCH_CLK_H__ + +#ifdef CONFIG_PLL +#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) +#else +#define MAIN_CLK_RATE (CFG_OSC0_HZ) +#endif + +static inline unsigned long get_cpu_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_CPU; +} +static inline unsigned long get_hsb_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_HSB; +} +static inline unsigned long get_pba_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_PBA; +} +static inline unsigned long get_pbb_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_PBB; +} + +/* Accessors for specific devices. More will be added as needed. */ +static inline unsigned long get_sdram_clk_rate(void) +{ + return get_hsb_clk_rate(); +} +static inline unsigned long get_usart_clk_rate(unsigned int dev_id) +{ + return get_pba_clk_rate(); +} +static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) +{ + return get_pbb_clk_rate(); +} +static inline unsigned long get_macb_hclk_rate(unsigned int dev_id) +{ + return get_hsb_clk_rate(); +} +static inline unsigned long get_mci_clk_rate(void) +{ + return get_pbb_clk_rate(); +} + +#endif /* __ASM_AVR32_ARCH_CLK_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h new file mode 100644 index 000000000..e4812d4d0 --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/gpio.h @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_GPIO_H__ +#define __ASM_AVR32_ARCH_GPIO_H__ + +#include <asm/arch/memory-map.h> + +#define NR_GPIO_CONTROLLERS 5 + +/* + * Pin numbers identifying specific GPIO pins on the chip. + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIN_PA0 (GPIO_PIOA_BASE + 0) +#define GPIO_PIN_PA1 (GPIO_PIOA_BASE + 1) +#define GPIO_PIN_PA2 (GPIO_PIOA_BASE + 2) +#define GPIO_PIN_PA3 (GPIO_PIOA_BASE + 3) +#define GPIO_PIN_PA4 (GPIO_PIOA_BASE + 4) +#define GPIO_PIN_PA5 (GPIO_PIOA_BASE + 5) +#define GPIO_PIN_PA6 (GPIO_PIOA_BASE + 6) +#define GPIO_PIN_PA7 (GPIO_PIOA_BASE + 7) +#define GPIO_PIN_PA8 (GPIO_PIOA_BASE + 8) +#define GPIO_PIN_PA9 (GPIO_PIOA_BASE + 9) +#define GPIO_PIN_PA10 (GPIO_PIOA_BASE + 10) +#define GPIO_PIN_PA11 (GPIO_PIOA_BASE + 11) +#define GPIO_PIN_PA12 (GPIO_PIOA_BASE + 12) +#define GPIO_PIN_PA13 (GPIO_PIOA_BASE + 13) +#define GPIO_PIN_PA14 (GPIO_PIOA_BASE + 14) +#define GPIO_PIN_PA15 (GPIO_PIOA_BASE + 15) +#define GPIO_PIN_PA16 (GPIO_PIOA_BASE + 16) +#define GPIO_PIN_PA17 (GPIO_PIOA_BASE + 17) +#define GPIO_PIN_PA18 (GPIO_PIOA_BASE + 18) +#define GPIO_PIN_PA19 (GPIO_PIOA_BASE + 19) +#define GPIO_PIN_PA20 (GPIO_PIOA_BASE + 20) +#define GPIO_PIN_PA21 (GPIO_PIOA_BASE + 21) +#define GPIO_PIN_PA22 (GPIO_PIOA_BASE + 22) +#define GPIO_PIN_PA23 (GPIO_PIOA_BASE + 23) +#define GPIO_PIN_PA24 (GPIO_PIOA_BASE + 24) +#define GPIO_PIN_PA25 (GPIO_PIOA_BASE + 25) +#define GPIO_PIN_PA26 (GPIO_PIOA_BASE + 26) +#define GPIO_PIN_PA27 (GPIO_PIOA_BASE + 27) +#define GPIO_PIN_PA28 (GPIO_PIOA_BASE + 28) +#define GPIO_PIN_PA29 (GPIO_PIOA_BASE + 29) +#define GPIO_PIN_PA30 (GPIO_PIOA_BASE + 30) +#define GPIO_PIN_PA31 (GPIO_PIOA_BASE + 31) + +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIN_PB0 (GPIO_PIOB_BASE + 0) +#define GPIO_PIN_PB1 (GPIO_PIOB_BASE + 1) +#define GPIO_PIN_PB2 (GPIO_PIOB_BASE + 2) +#define GPIO_PIN_PB3 (GPIO_PIOB_BASE + 3) +#define GPIO_PIN_PB4 (GPIO_PIOB_BASE + 4) +#define GPIO_PIN_PB5 (GPIO_PIOB_BASE + 5) +#define GPIO_PIN_PB6 (GPIO_PIOB_BASE + 6) +#define GPIO_PIN_PB7 (GPIO_PIOB_BASE + 7) +#define GPIO_PIN_PB8 (GPIO_PIOB_BASE + 8) +#define GPIO_PIN_PB9 (GPIO_PIOB_BASE + 9) +#define GPIO_PIN_PB10 (GPIO_PIOB_BASE + 10) +#define GPIO_PIN_PB11 (GPIO_PIOB_BASE + 11) +#define GPIO_PIN_PB12 (GPIO_PIOB_BASE + 12) +#define GPIO_PIN_PB13 (GPIO_PIOB_BASE + 13) +#define GPIO_PIN_PB14 (GPIO_PIOB_BASE + 14) +#define GPIO_PIN_PB15 (GPIO_PIOB_BASE + 15) +#define GPIO_PIN_PB16 (GPIO_PIOB_BASE + 16) +#define GPIO_PIN_PB17 (GPIO_PIOB_BASE + 17) +#define GPIO_PIN_PB18 (GPIO_PIOB_BASE + 18) +#define GPIO_PIN_PB19 (GPIO_PIOB_BASE + 19) +#define GPIO_PIN_PB20 (GPIO_PIOB_BASE + 20) +#define GPIO_PIN_PB21 (GPIO_PIOB_BASE + 21) +#define GPIO_PIN_PB22 (GPIO_PIOB_BASE + 22) +#define GPIO_PIN_PB23 (GPIO_PIOB_BASE + 23) +#define GPIO_PIN_PB24 (GPIO_PIOB_BASE + 24) +#define GPIO_PIN_PB25 (GPIO_PIOB_BASE + 25) +#define GPIO_PIN_PB26 (GPIO_PIOB_BASE + 26) +#define GPIO_PIN_PB27 (GPIO_PIOB_BASE + 27) +#define GPIO_PIN_PB28 (GPIO_PIOB_BASE + 28) +#define GPIO_PIN_PB29 (GPIO_PIOB_BASE + 29) +#define GPIO_PIN_PB30 (GPIO_PIOB_BASE + 30) + +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIN_PC0 (GPIO_PIOC_BASE + 0) +#define GPIO_PIN_PC1 (GPIO_PIOC_BASE + 1) +#define GPIO_PIN_PC2 (GPIO_PIOC_BASE + 2) +#define GPIO_PIN_PC3 (GPIO_PIOC_BASE + 3) +#define GPIO_PIN_PC4 (GPIO_PIOC_BASE + 4) +#define GPIO_PIN_PC5 (GPIO_PIOC_BASE + 5) +#define GPIO_PIN_PC6 (GPIO_PIOC_BASE + 6) +#define GPIO_PIN_PC7 (GPIO_PIOC_BASE + 7) +#define GPIO_PIN_PC8 (GPIO_PIOC_BASE + 8) +#define GPIO_PIN_PC9 (GPIO_PIOC_BASE + 9) +#define GPIO_PIN_PC10 (GPIO_PIOC_BASE + 10) +#define GPIO_PIN_PC11 (GPIO_PIOC_BASE + 11) +#define GPIO_PIN_PC12 (GPIO_PIOC_BASE + 12) +#define GPIO_PIN_PC13 (GPIO_PIOC_BASE + 13) +#define GPIO_PIN_PC14 (GPIO_PIOC_BASE + 14) +#define GPIO_PIN_PC15 (GPIO_PIOC_BASE + 15) +#define GPIO_PIN_PC16 (GPIO_PIOC_BASE + 16) +#define GPIO_PIN_PC17 (GPIO_PIOC_BASE + 17) +#define GPIO_PIN_PC18 (GPIO_PIOC_BASE + 18) +#define GPIO_PIN_PC19 (GPIO_PIOC_BASE + 19) +#define GPIO_PIN_PC20 (GPIO_PIOC_BASE + 20) +#define GPIO_PIN_PC21 (GPIO_PIOC_BASE + 21) +#define GPIO_PIN_PC22 (GPIO_PIOC_BASE + 22) +#define GPIO_PIN_PC23 (GPIO_PIOC_BASE + 23) +#define GPIO_PIN_PC24 (GPIO_PIOC_BASE + 24) +#define GPIO_PIN_PC25 (GPIO_PIOC_BASE + 25) +#define GPIO_PIN_PC26 (GPIO_PIOC_BASE + 26) +#define GPIO_PIN_PC27 (GPIO_PIOC_BASE + 27) +#define GPIO_PIN_PC28 (GPIO_PIOC_BASE + 28) +#define GPIO_PIN_PC29 (GPIO_PIOC_BASE + 29) +#define GPIO_PIN_PC30 (GPIO_PIOC_BASE + 30) +#define GPIO_PIN_PC31 (GPIO_PIOC_BASE + 31) + +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) +#define GPIO_PIN_PD0 (GPIO_PIOD_BASE + 0) +#define GPIO_PIN_PD1 (GPIO_PIOD_BASE + 1) +#define GPIO_PIN_PD2 (GPIO_PIOD_BASE + 2) +#define GPIO_PIN_PD3 (GPIO_PIOD_BASE + 3) +#define GPIO_PIN_PD4 (GPIO_PIOD_BASE + 4) +#define GPIO_PIN_PD5 (GPIO_PIOD_BASE + 5) +#define GPIO_PIN_PD6 (GPIO_PIOD_BASE + 6) +#define GPIO_PIN_PD7 (GPIO_PIOD_BASE + 7) +#define GPIO_PIN_PD8 (GPIO_PIOD_BASE + 8) +#define GPIO_PIN_PD9 (GPIO_PIOD_BASE + 9) +#define GPIO_PIN_PD10 (GPIO_PIOD_BASE + 10) +#define GPIO_PIN_PD11 (GPIO_PIOD_BASE + 11) +#define GPIO_PIN_PD12 (GPIO_PIOD_BASE + 12) +#define GPIO_PIN_PD13 (GPIO_PIOD_BASE + 13) +#define GPIO_PIN_PD14 (GPIO_PIOD_BASE + 14) +#define GPIO_PIN_PD15 (GPIO_PIOD_BASE + 15) +#define GPIO_PIN_PD16 (GPIO_PIOD_BASE + 16) +#define GPIO_PIN_PD17 (GPIO_PIOD_BASE + 17) + +#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) +#define GPIO_PIN_PE0 (GPIO_PIOE_BASE + 0) +#define GPIO_PIN_PE1 (GPIO_PIOE_BASE + 1) +#define GPIO_PIN_PE2 (GPIO_PIOE_BASE + 2) +#define GPIO_PIN_PE3 (GPIO_PIOE_BASE + 3) +#define GPIO_PIN_PE4 (GPIO_PIOE_BASE + 4) +#define GPIO_PIN_PE5 (GPIO_PIOE_BASE + 5) +#define GPIO_PIN_PE6 (GPIO_PIOE_BASE + 6) +#define GPIO_PIN_PE7 (GPIO_PIOE_BASE + 7) +#define GPIO_PIN_PE8 (GPIO_PIOE_BASE + 8) +#define GPIO_PIN_PE9 (GPIO_PIOE_BASE + 9) +#define GPIO_PIN_PE10 (GPIO_PIOE_BASE + 10) +#define GPIO_PIN_PE11 (GPIO_PIOE_BASE + 11) +#define GPIO_PIN_PE12 (GPIO_PIOE_BASE + 12) +#define GPIO_PIN_PE13 (GPIO_PIOE_BASE + 13) +#define GPIO_PIN_PE14 (GPIO_PIOE_BASE + 14) +#define GPIO_PIN_PE15 (GPIO_PIOE_BASE + 15) +#define GPIO_PIN_PE16 (GPIO_PIOE_BASE + 16) +#define GPIO_PIN_PE17 (GPIO_PIOE_BASE + 17) +#define GPIO_PIN_PE18 (GPIO_PIOE_BASE + 18) +#define GPIO_PIN_PE19 (GPIO_PIOE_BASE + 19) +#define GPIO_PIN_PE20 (GPIO_PIOE_BASE + 20) +#define GPIO_PIN_PE21 (GPIO_PIOE_BASE + 21) +#define GPIO_PIN_PE22 (GPIO_PIOE_BASE + 22) +#define GPIO_PIN_PE23 (GPIO_PIOE_BASE + 23) +#define GPIO_PIN_PE24 (GPIO_PIOE_BASE + 24) +#define GPIO_PIN_PE25 (GPIO_PIOE_BASE + 25) +#define GPIO_PIN_PE26 (GPIO_PIOE_BASE + 26) + +static inline void *gpio_pin_to_addr(unsigned int pin) +{ + switch (pin >> 5) { + case 0: + return (void *)PIOA_BASE; + case 1: + return (void *)PIOB_BASE; + case 2: + return (void *)PIOC_BASE; + case 3: + return (void *)PIOD_BASE; + case 4: + return (void *)PIOE_BASE; + default: + return NULL; + } +} + +void gpio_select_periph_A(unsigned int pin, int use_pullup); +void gpio_select_periph_B(unsigned int pin, int use_pullup); + +void gpio_enable_ebi(void); +void gpio_enable_usart0(void); +void gpio_enable_usart1(void); +void gpio_enable_usart2(void); +void gpio_enable_usart3(void); +void gpio_enable_macb0(void); +void gpio_enable_macb1(void); +void gpio_enable_mmci(void); + +#endif /* __ASM_AVR32_ARCH_GPIO_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h index e6df4b7fe..b0e787a92 100644 --- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h +++ b/include/asm-avr32/arch-at32ap7000/hmatrix2.h @@ -224,9 +224,9 @@ | HMATRIX2_BF(name,value)) /* Register access macros */ -#define hmatrix2_readl(port,reg) \ - readl((port)->regs + HMATRIX2_##reg) -#define hmatrix2_writel(port,reg,value) \ - writel((value), (port)->regs + HMATRIX2_##reg) +#define hmatrix2_readl(reg) \ + readl((void *)HMATRIX_BASE + HMATRIX2_##reg) +#define hmatrix2_writel(reg,value) \ + writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg) #endif /* __ASM_AVR32_HMATRIX2_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h index 8ffe851c8..5513e88e7 100644 --- a/include/asm-avr32/arch-at32ap7000/memory-map.h +++ b/include/asm-avr32/arch-at32ap7000/memory-map.h @@ -19,43 +19,48 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -#ifndef __ASM_AVR32_PART_MEMORY_MAP_H__ -#define __ASM_AVR32_PART_MEMORY_MAP_H__ +#ifndef __AT32AP7000_MEMORY_MAP_H__ +#define __AT32AP7000_MEMORY_MAP_H__ -#define AUDIOC_BASE 0xFFF02800 -#define DAC_BASE 0xFFF02000 -#define DMAC_BASE 0xFF200000 -#define ECC_BASE 0xFFF03C00 -#define HISI_BASE 0xFFF02C00 -#define HMATRIX_BASE 0xFFF00800 -#define HSDRAMC_BASE 0xFFF03800 -#define HSMC_BASE 0xFFF03400 -#define LCDC_BASE 0xFF000000 -#define MACB0_BASE 0xFFF01800 -#define MACB1_BASE 0xFFF01C00 -#define MMCI_BASE 0xFFF02400 -#define PIOA_BASE 0xFFE02800 -#define PIOB_BASE 0xFFE02C00 -#define PIOC_BASE 0xFFE03000 -#define PIOD_BASE 0xFFE03400 -#define PIOE_BASE 0xFFE03800 -#define PSIF_BASE 0xFFE03C00 -#define PWM_BASE 0xFFF01400 -#define SM_BASE 0xFFF00000 -#define INTC_BASE 0XFFF00400 -#define SPI0_BASE 0xFFE00000 -#define SPI1_BASE 0xFFE00400 -#define SSC0_BASE 0xFFE01C00 -#define SSC1_BASE 0xFFE02000 -#define SSC2_BASE 0xFFE02400 -#define TIMER0_BASE 0xFFF00C00 -#define TIMER1_BASE 0xFFF01000 -#define TWI_BASE 0xFFE00800 -#define USART0_BASE 0xFFE00C00 -#define USART1_BASE 0xFFE01000 -#define USART2_BASE 0xFFE01400 -#define USART3_BASE 0xFFE01800 -#define USB_FIFO 0xFF300000 -#define USB_BASE 0xFFF03000 +/* Devices on the High Speed Bus (HSB) */ +#define LCDC_BASE 0xFF000000 +#define DMAC_BASE 0xFF200000 +#define USB_FIFO 0xFF300000 -#endif /* __ASM_AVR32_PART_MEMORY_MAP_H__ */ +/* Devices on Peripheral Bus A (PBA) */ +#define SPI0_BASE 0xFFE00000 +#define SPI1_BASE 0xFFE00400 +#define TWI_BASE 0xFFE00800 +#define USART0_BASE 0xFFE00C00 +#define USART1_BASE 0xFFE01000 +#define USART2_BASE 0xFFE01400 +#define USART3_BASE 0xFFE01800 +#define SSC0_BASE 0xFFE01C00 +#define SSC1_BASE 0xFFE02000 +#define SSC2_BASE 0xFFE02400 +#define PIOA_BASE 0xFFE02800 +#define PIOB_BASE 0xFFE02C00 +#define PIOC_BASE 0xFFE03000 +#define PIOD_BASE 0xFFE03400 +#define PIOE_BASE 0xFFE03800 +#define PSIF_BASE 0xFFE03C00 + +/* Devices on Peripheral Bus B (PBB) */ +#define SM_BASE 0xFFF00000 +#define INTC_BASE 0xFFF00400 +#define HMATRIX_BASE 0xFFF00800 +#define TIMER0_BASE 0xFFF00C00 +#define TIMER1_BASE 0xFFF01000 +#define PWM_BASE 0xFFF01400 +#define MACB0_BASE 0xFFF01800 +#define MACB1_BASE 0xFFF01C00 +#define DAC_BASE 0xFFF02000 +#define MMCI_BASE 0xFFF02400 +#define AUDIOC_BASE 0xFFF02800 +#define HISI_BASE 0xFFF02C00 +#define USB_BASE 0xFFF03000 +#define HSMC_BASE 0xFFF03400 +#define HSDRAMC_BASE 0xFFF03800 +#define ECC_BASE 0xFFF03C00 + +#endif /* __AT32AP7000_MEMORY_MAP_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap7000/mmc.h new file mode 100644 index 000000000..fcfbbb3c6 --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/mmc.h @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_MMC_H +#define __ASM_AVR32_MMC_H + +struct mmc_cid { + unsigned long psn; + unsigned short oid; + unsigned char mid; + unsigned char prv; + unsigned char mdt; + char pnm[7]; +}; + +struct mmc_csd +{ + u8 csd_structure:2, + spec_vers:4, + rsvd1:2; + u8 taac; + u8 nsac; + u8 tran_speed; + u16 ccc:12, + read_bl_len:4; + u64 read_bl_partial:1, + write_blk_misalign:1, + read_blk_misalign:1, + dsr_imp:1, + rsvd2:2, + c_size:12, + vdd_r_curr_min:3, + vdd_r_curr_max:3, + vdd_w_curr_min:3, + vdd_w_curr_max:3, + c_size_mult:3, + sector_size:5, + erase_grp_size:5, + wp_grp_size:5, + wp_grp_enable:1, + default_ecc:2, + r2w_factor:3, + write_bl_len:4, + write_bl_partial:1, + rsvd3:5; + u8 file_format_grp:1, + copy:1, + perm_write_protect:1, + tmp_write_protect:1, + file_format:2, + ecc:2; + u8 crc:7; + u8 one:1; +}; + +/* MMC Command numbers */ +#define MMC_CMD_GO_IDLE_STATE 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RELATIVE_ADDR 3 +#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3 +#define MMC_CMD_SET_DSR 4 +#define MMC_CMD_SELECT_CARD 7 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_SINGLE_BLOCK 17 +#define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_WRITE_BLOCK 24 +#define MMC_CMD_APP_CMD 55 + +#define MMC_ACMD_SD_SEND_OP_COND 41 + +#define R1_ILLEGAL_COMMAND (1 << 22) +#define R1_APP_CMD (1 << 5) + +#endif /* __ASM_AVR32_MMC_H */ diff --git a/include/asm-avr32/arch-at32ap7000/platform.h b/include/asm-avr32/arch-at32ap7000/platform.h deleted file mode 100644 index 759050116..000000000 --- a/include/asm-avr32/arch-at32ap7000/platform.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) 2005-2006 Atmel Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _ASM_AVR32_ARCH_PM_H -#define _ASM_AVR32_ARCH_PM_H - -#include <config.h> - -enum clock_domain_id { - CLOCK_CPU, - CLOCK_HSB, - CLOCK_PBA, - CLOCK_PBB, - NR_CLOCK_DOMAINS, -}; - -enum resource_type { - RESOURCE_GPIO, - RESOURCE_CLOCK, -}; - -enum gpio_func { - GPIO_FUNC_GPIO, - GPIO_FUNC_A, - GPIO_FUNC_B, -}; - -enum device_id { - DEVICE_HEBI, - DEVICE_PBA_BRIDGE, - DEVICE_PBB_BRIDGE, - DEVICE_HRAMC, - /* GPIO controllers must be kept together */ - DEVICE_PIOA, - DEVICE_PIOB, - DEVICE_PIOC, - DEVICE_PIOD, - DEVICE_PIOE, - DEVICE_SM, - DEVICE_INTC, - DEVICE_HMATRIX, -#if defined(CFG_HPDC) - DEVICE_HPDC, -#endif -#if defined(CFG_MACB0) - DEVICE_MACB0, -#endif -#if defined(CFG_MACB1) - DEVICE_MACB1, -#endif -#if defined(CFG_LCDC) - DEVICE_LCDC, -#endif -#if defined(CFG_USART0) - DEVICE_USART0, -#endif -#if defined(CFG_USART1) - DEVICE_USART1, -#endif -#if defined(CFG_USART2) - DEVICE_USART2, -#endif -#if defined(CFG_USART3) - DEVICE_USART3, -#endif -#if defined(CFG_MMCI) - DEVICE_MMCI, -#endif -#if defined(CFG_DMAC) - DEVICE_DMAC, -#endif - NR_DEVICES, - NO_DEVICE = -1, -}; - -struct resource { - enum resource_type type; - union { - struct { - unsigned long base; - } iomem; - struct { - unsigned char nr_pins; - enum device_id gpio_dev; - enum gpio_func func; - unsigned short start; - } gpio; - struct { - enum clock_domain_id id; - unsigned char index; - } clock; - } u; -}; - -struct device { - void *regs; - unsigned int nr_resources; - const struct resource *resource; -}; - -struct clock_domain { - unsigned short reg; - enum clock_domain_id id; - enum device_id bridge; -}; - -extern const struct device chip_device[NR_DEVICES]; -extern const struct clock_domain chip_clock[NR_CLOCK_DOMAINS]; - -/** - * Set up PIO, clock management and I/O memory for a device. - */ -const struct device *get_device(enum device_id devid); -void put_device(const struct device *dev); - -int gpio_set_func(enum device_id gpio_devid, unsigned int start, - unsigned int nr_pins, enum gpio_func func); -void gpio_free(enum device_id gpio_devid, unsigned int start, - unsigned int nr_pins); - -void pm_init(void); -int pm_enable_clock(enum clock_domain_id id, unsigned int index); -void pm_disable_clock(enum clock_domain_id id, unsigned int index); -unsigned long pm_get_clock_freq(enum clock_domain_id domain); - -void cpu_enable_sdram(void); - -#endif /* _ASM_AVR32_ARCH_PM_H */ diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h index 01d836c63..681c514cc 100644 --- a/include/asm-avr32/global_data.h +++ b/include/asm-avr32/global_data.h @@ -35,10 +35,8 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - const struct device *console_uart; - const struct device *sm; unsigned long baudrate; - unsigned long sdram_size; + unsigned long stack_end; /* highest stack address */ unsigned long have_console; /* serial_init() was called */ unsigned long reloc_off; /* Relocation Offset */ unsigned long env_addr; /* Address of env struct */ diff --git a/include/asm-avr32/initcalls.h b/include/asm-avr32/initcalls.h index 7ba25cde5..583e5dc10 100644 --- a/include/asm-avr32/initcalls.h +++ b/include/asm-avr32/initcalls.h @@ -26,8 +26,6 @@ extern int cpu_init(void); extern int timer_init(void); -extern void board_init_memories(void); -extern void board_init_pio(void); extern void board_init_info(void); #endif /* __ASM_AVR32_INITCALLS_H__ */ diff --git a/include/asm-blackfin/arch-bf533/bf533_serial.h b/include/asm-blackfin/arch-bf533/bf533_serial.h index ce58863b1..65749ee45 100644 --- a/include/asm-blackfin/arch-bf533/bf533_serial.h +++ b/include/asm-blackfin/arch-bf533/bf533_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf533_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_SERIAL_H_ diff --git a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h index bc09922a5..f4440a8d4 100644 --- a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h +++ b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_RTC_H_ diff --git a/include/asm-blackfin/arch-bf533/cplbtab.h b/include/asm-blackfin/arch-bf533/cplbtab.h deleted file mode 100644 index 89f032538..000000000 --- a/include/asm-blackfin/arch-bf533/cplbtab.h +++ /dev/null @@ -1,482 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/************************************************************************* - * ICPLB TABLE - *************************************************************************/ - -.data -/* This table is configurable */ - .align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.align 4; -.global _ipdt_table _ipdt_table:.byte4 0x00000000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ -#ifndef CONFIG_EZKIT /*STAMP Memory regions */ -.byte4 0x02000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ -#endif -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04400000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04800000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04C00000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05000000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05400000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05800000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05C00000; -.byte4(SDRAM_IGENERIC); -.byte4 0x06000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page25 */ -.byte4 0x06400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page26 */ -.byte4 0x06800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page27 */ -.byte4 0x06C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page28 */ -.byte4 0x07000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page29 */ -.byte4 0x07400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page30 */ -.byte4 0x07800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page31 */ -.byte4 0x07C00000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page32 */ -#endif -.byte4 0xffffffff; /* end of section - termination */ - -/********************************************************************** - * PAGE DESCRIPTOR TABLE - * - **********************************************************************/ - -/* Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global _dpdt_table _dpdt_table:.byte4 0x00000000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ - -#ifndef CONFIG_EZKIT -.byte4 0x02000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ -#endif - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04400000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04800000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04C00000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05000000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05400000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05800000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05C00000; -.byte4(SDRAM_DGENERIC); -.byte4 0x06000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page25 */ -.byte4 0x06400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page26 */ -.byte4 0x06800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page27 */ -.byte4 0x06C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page28 */ -.byte4 0x07000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page29 */ -.byte4 0x07400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page30 */ -.byte4 0x07800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page31 */ -.byte4 0x07C00000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page32 */ -#endif - -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ - -#if (BFIN_CPU == ADSP_BF533) -.byte4 0xFF800000; -.byte4(L1_DMEMORY); -.byte4 0xFF801000; -.byte4(L1_DMEMORY); -.byte4 0xFF802000; -.byte4(L1_DMEMORY); -.byte4 0xFF803000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF804000; -.byte4(L1_DMEMORY); -.byte4 0xFF805000; -.byte4(L1_DMEMORY); -.byte4 0xFF806000; -.byte4(L1_DMEMORY); -.byte4 0xFF807000; -.byte4(L1_DMEMORY); -#if (BFIN_CPU == ADSP_BF533) -.byte4 0xFF900000; -.byte4(L1_DMEMORY); -.byte4 0xFF901000; -.byte4(L1_DMEMORY); -.byte4 0xFF902000; -.byte4(L1_DMEMORY); -.byte4 0xFF903000; -.byte4(L1_DMEMORY); -#endif -#if ((BFIN_CPU == ADSP_BF532) || (BFIN_CPU == ADSP_BF533)) -.byte4 0xFF904000; -.byte4(L1_DMEMORY); -.byte4 0xFF905000; -.byte4(L1_DMEMORY); -.byte4 0xFF906000; -.byte4(L1_DMEMORY); -.byte4 0xFF907000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFFB00000; -.byte4(L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination */ - -#ifdef CONFIG_CPLB_INFO -.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ -_ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ -_dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf533/irq.h b/include/asm-blackfin/arch-bf533/irq.h index 9c5230db4..323574590 100644 --- a/include/asm-blackfin/arch-bf533/irq.h +++ b/include/asm-blackfin/arch-bf533/irq.h @@ -1,7 +1,7 @@ /* * U-boot bf533_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -33,8 +33,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_IRQ_H_ diff --git a/include/asm-blackfin/arch-bf537/bf537_serial.h b/include/asm-blackfin/arch-bf537/bf537_serial.h index 1610411ee..64088f243 100644 --- a/include/asm-blackfin/arch-bf537/bf537_serial.h +++ b/include/asm-blackfin/arch-bf537/bf537_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf537_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_SERIAL_H_ diff --git a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h index 0043e42bf..db5cc6f22 100644 --- a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h +++ b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf537_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_RTC_H_ diff --git a/include/asm-blackfin/arch-bf537/cplbtab.h b/include/asm-blackfin/arch-bf537/cplbtab.h deleted file mode 100644 index c5151bb4a..000000000 --- a/include/asm-blackfin/arch-bf537/cplbtab.h +++ /dev/null @@ -1,408 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/* - * ICPLB TABLE - */ - -.data -/* This table is configurable */ - .align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.align 4; -.global _ipdt_table _ipdt_table:.byte4 0x00000000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ -.byte4 0x02000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ - -.byte4 0xffffffff; /* end of section - termination */ - -/* - * PAGE DESCRIPTOR TABLE - * - */ - -/* - * Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global _dpdt_table _dpdt_table:.byte4 0x00000000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ -.byte4 0x02000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ - -#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) -.byte4 0xFF800000; -.byte4(L1_DMEMORY); -.byte4 0xFF801000; -.byte4(L1_DMEMORY); -.byte4 0xFF802000; -.byte4(L1_DMEMORY); -.byte4 0xFF803000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF804000; -.byte4(L1_DMEMORY); -.byte4 0xFF805000; -.byte4(L1_DMEMORY); -.byte4 0xFF806000; -.byte4(L1_DMEMORY); -.byte4 0xFF807000; -.byte4(L1_DMEMORY); -#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) -.byte4 0xFF900000; -.byte4(L1_DMEMORY); -.byte4 0xFF901000; -.byte4(L1_DMEMORY); -.byte4 0xFF902000; -.byte4(L1_DMEMORY); -.byte4 0xFF903000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF904000; -.byte4(L1_DMEMORY); -.byte4 0xFF905000; -.byte4(L1_DMEMORY); -.byte4 0xFF906000; -.byte4(L1_DMEMORY); -.byte4 0xFF907000; -.byte4(L1_DMEMORY); - -.byte4 0xFFB00000; -.byte4(L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination */ - -#ifdef CONFIG_CPLB_INFO -.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ -_ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ -_dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ - -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf537/irq.h b/include/asm-blackfin/arch-bf537/irq.h index 4cb4c1502..527d8a21f 100644 --- a/include/asm-blackfin/arch-bf537/irq.h +++ b/include/asm-blackfin/arch-bf537/irq.h @@ -1,7 +1,7 @@ /* * U-boot bf537_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -33,8 +33,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_IRQ_H_ diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h index 081022839..eb01ca25b 100644 --- a/include/asm-blackfin/arch-bf561/bf561_serial.h +++ b/include/asm-blackfin/arch-bf561/bf561_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf561_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF561_SERIAL_H_ diff --git a/include/asm-blackfin/arch-common/bf53x_rtc.h b/include/asm-blackfin/arch-common/bf53x_rtc.h index bc09922a5..f4440a8d4 100644 --- a/include/asm-blackfin/arch-common/bf53x_rtc.h +++ b/include/asm-blackfin/arch-common/bf53x_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_RTC_H_ diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h index 7766c4ab0..438e50b8e 100644 --- a/include/asm-blackfin/bitops.h +++ b/include/asm-blackfin/bitops.h @@ -1,7 +1,7 @@ /* * U-boot - bitops.h Routines for bit operations * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_BITOPS_H diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index 0ec92071b..bf502a4e6 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_H_ diff --git a/include/asm-blackfin/blackfin_defs.h b/include/asm-blackfin/blackfin_defs.h index 219021597..451d29c3c 100644 --- a/include/asm-blackfin/blackfin_defs.h +++ b/include/asm-blackfin/blackfin_defs.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin_defs.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_DEFS_H__ diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h index 3b4df4e13..a1a52a5c1 100644 --- a/include/asm-blackfin/byteorder.h +++ b/include/asm-blackfin/byteorder.h @@ -1,7 +1,7 @@ /* * U-boot - byteorder.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_BYTEORDER_H diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index dd695e10a..9d8d9ecc8 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -50,7 +50,7 @@ #define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) #define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) /*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ @@ -61,20 +61,20 @@ #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) #else /*Write Through */ #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) #endif #if defined(CONFIG_BF561) -#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM +L1 + ASYNC_Memory */ +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 4) /* SDRAM +L1 + ASYNC_Memory */ #else -#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 3) /* SDRAM + L1 + ASYNC_Memory */ +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM + L1 + ASYNC_Memory */ #endif #endif /* _CPLB_H */ diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h index 108c2792a..ed2b851e9 100644 --- a/include/asm-blackfin/current.h +++ b/include/asm-blackfin/current.h @@ -1,7 +1,7 @@ /* * U-boot - current.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_CURRENT_H diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index 0c01e9fb7..ea0b3664e 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -1,7 +1,7 @@ /* * U-boot - delay.h Routines for introducing delays * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_DELAY_H diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h index b64d40699..eb84f11bd 100644 --- a/include/asm-blackfin/entry.h +++ b/include/asm-blackfin/entry.h @@ -1,7 +1,7 @@ /* * U-boot - entry.h Routines for context saving and restoring * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_ENTRY_H @@ -27,7 +27,6 @@ #include <linux/config.h> #include <asm/setup.h> -#include <asm/page.h> /* * Stack layout in 'ret_from_exception': diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h index 713bba0b2..0d2c61803 100644 --- a/include/asm-blackfin/errno.h +++ b/include/asm-blackfin/errno.h @@ -1,7 +1,7 @@ /* * U-boot - errno.h Error number defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_ERRNO_H diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h index 1c738533c..9024d0a06 100644 --- a/include/asm-blackfin/global_data.h +++ b/include/asm-blackfin/global_data.h @@ -1,7 +1,7 @@ /* * U-boot - global_data.h Declarations for global data of u-boot * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ASM_GBL_DATA_H diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h index baa3e0c5c..9b360553c 100644 --- a/include/asm-blackfin/hw_irq.h +++ b/include/asm-blackfin/hw_irq.h @@ -1,7 +1,7 @@ /* * U-boot - hw_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/hw_irq.h @@ -24,8 +24,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <linux/config.h> diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h index 3c087c33e..5d0ad0618 100644 --- a/include/asm-blackfin/io-kernel.h +++ b/include/asm-blackfin/io-kernel.h @@ -1,7 +1,7 @@ /* * U-boot - io-kernel.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IO_H diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 6bab6e766..332d2c643 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -1,7 +1,7 @@ /* * U-boot - io.h IO routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IO_H @@ -37,6 +37,7 @@ extern void cf_outb(unsigned char val, volatile unsigned char *addr); static inline void sync(void) { + __builtin_bfin_ssync(); } /* diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h index aede74212..1fff31688 100644 --- a/include/asm-blackfin/irq.h +++ b/include/asm-blackfin/irq.h @@ -1,7 +1,7 @@ /* * U-boot - irq.h Interrupt related header file * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file was based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -31,8 +31,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IRQ_H_ diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h index 18f0c36d2..4fc1acf0b 100644 --- a/include/asm-blackfin/linkage.h +++ b/include/asm-blackfin/linkage.h @@ -1,7 +1,7 @@ /* * U-boot - linkage.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _LINUX_LINKAGE_H diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h index 4fea74c6c..8bf94738e 100644 --- a/include/asm-blackfin/machdep.h +++ b/include/asm-blackfin/machdep.h @@ -1,7 +1,7 @@ /* * U-boot - machdep.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_MACHDEP_H diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h index d9d8bf9ba..cb448ad61 100644 --- a/include/asm-blackfin/mem_init.h +++ b/include/asm-blackfin/mem_init.h @@ -1,7 +1,7 @@ /* * U-boot - mem_init.h Header file for memory initialization * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #if (CONFIG_MEM_MT48LC16M16A2TG_75 || \ diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h deleted file mode 100644 index d59828cda..000000000 --- a/include/asm-blackfin/page.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * U-boot - page.h - * - * Copyright (c) 2005 blackfin.uclinux.org - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _BLACKFIN_PAGE_H -#define _BLACKFIN_PAGE_H - -#include <linux/config.h> - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (4096) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifdef __KERNEL__ - -#include <asm/setup.h> - -#if PAGE_SHIFT < 13 -#define KTHREAD_SIZE (8192) -#else -#define KTHREAD_SIZE PAGE_SIZE -#endif - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr) clear_page(page) -#define copy_user_page(to, from, vaddr) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { - unsigned long pte; -} pte_t; -typedef struct { - unsigned long pmd[16]; -} pmd_t; -typedef struct { - unsigned long pgd; -} pgd_t; -typedef struct { - unsigned long pgprot; -} pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - -/* Pure 2^n version of get_order */ -extern __inline__ int get_order(unsigned long size) -{ - int order; - - size = (size - 1) >> (PAGE_SHIFT - 1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - -#endif /* !__ASSEMBLY__ */ - -#include <asm/page_offset.h> - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)vaddr) -#define __va(paddr) phys_to_virt((unsigned long)paddr) - -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) - -#define PAGE_BUG(page) do { \ - BUG(); \ -} while (0) - -#endif - -#endif - -#endif diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h index 262473fc3..cfd8f1fef 100644 --- a/include/asm-blackfin/page_offset.h +++ b/include/asm-blackfin/page_offset.h @@ -1,7 +1,7 @@ /* * U-boot - page_offset.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h index f1f2b5ffc..27889e8e8 100644 --- a/include/asm-blackfin/posix_types.h +++ b/include/asm-blackfin/posix_types.h @@ -1,7 +1,7 @@ /* * U-boot - posix_types.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ARCH_BLACKFIN_POSIX_TYPES_H diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index df49bedc0..6cd4f567f 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -1,7 +1,7 @@ /* * U-boot - processor.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * include/asm-m68k/processor.h @@ -23,8 +23,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ASM_BLACKFIN_PROCESSOR_H diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h index afd57773a..f1b7d0064 100644 --- a/include/asm-blackfin/ptrace.h +++ b/include/asm-blackfin/ptrace.h @@ -1,7 +1,7 @@ /* * U-boot - ptrace.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_PTRACE_H diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h index 9e6d817fc..f30954374 100644 --- a/include/asm-blackfin/segment.h +++ b/include/asm-blackfin/segment.h @@ -1,7 +1,7 @@ /* * U-boot - segment.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SEGMENT_H diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h index a3c1715b4..b6b82679e 100644 --- a/include/asm-blackfin/setup.h +++ b/include/asm-blackfin/setup.h @@ -1,7 +1,7 @@ /* * U-boot - setup.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * asm/setup.h -- Definition of the Linux/Blackfin setup information @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SETUP_H diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h index fbef18618..d280ffeea 100644 --- a/include/asm-blackfin/shared_resources.h +++ b/include/asm-blackfin/shared_resources.h @@ -1,7 +1,7 @@ /* * U-boot - setup.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _SHARED_RESOURCES_H_ diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h index aac6bc99f..dd5020709 100644 --- a/include/asm-blackfin/string.h +++ b/include/asm-blackfin/string.h @@ -1,7 +1,7 @@ /* * U-boot - string.h String functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* Changed by Lineo Inc. May 2001 */ @@ -30,7 +30,6 @@ #ifdef __KERNEL__ /* only set these up for kernel code */ #include <asm/setup.h> -#include <asm/page.h> #include <config.h> #include <asm/blackfin.h> diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h index 0e53adfe0..eda887fb6 100644 --- a/include/asm-blackfin/system.h +++ b/include/asm-blackfin/system.h @@ -1,7 +1,7 @@ /* * U-boot - system.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SYSTEM_H diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h index 29e6eba6f..b90cedacb 100644 --- a/include/asm-blackfin/traps.h +++ b/include/asm-blackfin/traps.h @@ -1,7 +1,7 @@ /* * U-boot - traps.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/include/asm/traps.h @@ -23,8 +23,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h index 942ed275a..665a419f2 100644 --- a/include/asm-blackfin/types.h +++ b/include/asm-blackfin/types.h @@ -1,7 +1,7 @@ /* * U-boot - types.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_TYPES_H diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h index e1a435a13..b4928da4f 100644 --- a/include/asm-blackfin/u-boot.h +++ b/include/asm-blackfin/u-boot.h @@ -1,7 +1,7 @@ /* * U-boot - u-boot.h Structure declarations for board specific data * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,15 +21,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_arch_number; /* unique id for this board */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 61e2bfea7..6e913bb85 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -1,7 +1,7 @@ /* * U-boot - uaccess.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * Based on: include/asm-m68knommu/uaccess.h @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_UACCESS_H diff --git a/include/asm-blackfin/virtconvert.h b/include/asm-blackfin/virtconvert.h index 769f5a089..9eda9f855 100644 --- a/include/asm-blackfin/virtconvert.h +++ b/include/asm-blackfin/virtconvert.h @@ -1,7 +1,7 @@ /* * U-boot - virtconvert.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_VIRT_CONVERT__ @@ -33,7 +33,6 @@ #include <linux/config.h> #include <asm/setup.h> -#include <asm/page.h> #define mm_vtop(vaddr) ((unsigned long) vaddr) #define mm_ptov(vaddr) ((unsigned long) vaddr) diff --git a/include/asm-microblaze/microblaze_intc.h b/include/asm-microblaze/microblaze_intc.h new file mode 100644 index 000000000..6635aeacb --- /dev/null +++ b/include/asm-microblaze/microblaze_intc.h @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +typedef volatile struct microblaze_intc_t { + int isr; /* interrupt status register */ + int ipr; /* interrupt pending register */ + int ier; /* interrupt enable register */ + int iar; /* interrupt acknowledge register */ + int sie; /* set interrupt enable bits */ + int cie; /* clear interrupt enable bits */ + int ivr; /* interrupt vector register */ + int mer; /* master enable register */ +} microblaze_intc_t; + +struct irq_action { + interrupt_handler_t *handler; /* pointer to interrupt rutine */ + void *arg; + int count; /* number of interrupt */ +}; diff --git a/include/asm-microblaze/microblaze_timer.h b/include/asm-microblaze/microblaze_timer.h new file mode 100644 index 000000000..844c8db11 --- /dev/null +++ b/include/asm-microblaze/microblaze_timer.h @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define TIMER_ENABLE_ALL 0x400 /* ENALL */ +#define TIMER_PWM 0x200 /* PWMA0 */ +#define TIMER_INTERRUPT 0x100 /* T0INT */ +#define TIMER_ENABLE 0x080 /* ENT0 */ +#define TIMER_ENABLE_INTR 0x040 /* ENIT0 */ +#define TIMER_RESET 0x020 /* LOAD0 */ +#define TIMER_RELOAD 0x010 /* ARHT0 */ +#define TIMER_EXT_CAPTURE 0x008 /* CAPT0 */ +#define TIMER_EXT_COMPARE 0x004 /* GENT0 */ +#define TIMER_DOWN_COUNT 0x002 /* UDT0 */ +#define TIMER_CAPTURE_MODE 0x001 /* MDT0 */ + +typedef volatile struct microblaze_timer_t { + int control; /* control/statuc register TCSR */ + int loadreg; /* load register TLR */ + int counter; /* timer/counter register */ +} microblaze_timer_t; diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index c113b7ee0..26bc875f8 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -49,6 +49,9 @@ typedef struct global_data { unsigned long scc_clk; unsigned long brg_clk; #endif +#if defined(CONFIG_MPC7448HPC2) + unsigned long mem_clk; +#endif #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h new file mode 100644 index 000000000..114dc92db --- /dev/null +++ b/include/asm-ppc/gpio.h @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* 4xx PPC's have 2 GPIO controllers */ +#if defined(CONFIG_405EZ) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define GPIO_GROUP_MAX 2 +#else +#define GPIO_GROUP_MAX 1 +#endif + +#define GPIO_MAX 32 +#define GPIO_ALT1_SEL 0x40000000 +#define GPIO_ALT2_SEL 0x80000000 +#define GPIO_ALT3_SEL 0xc0000000 +#define GPIO_IN_SEL 0x40000000 +#define GPIO_MASK 0xc0000000 + +#define GPIO_VAL(gpio) (0x80000000 >> (gpio)) + +#ifndef __ASSEMBLY__ +typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t; +typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; +typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t; + +typedef struct { + unsigned long add; /* gpio core base address */ + gpio_driver_t in_out; /* Driver Setting */ + gpio_select_t alt_nb; /* Selected Alternate */ +} gpio_param_s; +#endif + +void gpio_config(int pin, int in_out, int gpio_alt, int out_val); +void gpio_write_bit(int pin, int val); +void gpio_set_chip_configuration(void); diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index d2af0e1df..79937dcd8 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -342,8 +342,12 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 +#undef CONFIG_OF_FLAT_TREE #define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 + /* maximum size of the flat tree (8K) */ #define OF_FLAT_TREE_MAX_SIZE 8192 diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 9e02ca31b..35b6a519e 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -31,20 +31,18 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_ACADIA 1 /* Board is Acadia */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_405EZ 1 /* Specifc 405EZ support*/ -#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_ACADIA 1 /* Board is Acadia */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EZ 1 /* Specifc 405EZ support*/ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */ #define CONFIG_NO_SERIAL_EEPROM /*#undef CONFIG_NO_SERIAL_EEPROM*/ #ifdef CONFIG_NO_SERIAL_EEPROM - /*---------------------------------------------------------------------------- * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, * assuming a 66MHz input clock to the 405EZ. @@ -59,24 +57,125 @@ * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFE000000 #define CFG_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (384 * 1024)/* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (512 * 1024)/* Reserve 512 kB for malloc() */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xfe000000 #define CFG_MONITOR_BASE TEXT_BASE +#define CFG_CPLD_BASE 0x80000000 +#define CFG_NAND_ADDR 0xd0000000 #define CFG_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */ -/* - * Define here the location of the environment variables (FLASH). - * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only - * supported for backward compatibility. - */ +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 /* OCM as init ram */ + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else - #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * RAM (CRAM) + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_RAM 64 /* 64MB */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +#if 0 /* test-only... */ +/*----------------------------------------------------------------------- + * SPI stuff - Define to include SPI control + *----------------------------------------------------------------------- + */ +#define CONFIG_SPI +#endif + +/*----------------------------------------------------------------------- + * Ethernet + *----------------------------------------------------------------------*/ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* # of rx buffers & descriptors*/ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo" @@ -122,13 +221,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_NET_MULTI 1 -#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE @@ -166,7 +258,6 @@ CFG_CMD_PCI | \ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ CFG_CMD_USB) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -174,76 +265,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -/* +/*----------------------------------------------------------------------- * Miscellaneous configurable options - */ + *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ -#define CFG_BASE_BAUD 691200 -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F - -#define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_EEPROM_ADDR (0xa8>>1) -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_ENABLE -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CFG_DTT_MAX_TEMP 70 -#define CFG_DTT_LOW_TEMP -30 -#define CFG_DTT_HYSTERESIS 3 - -#if 0 /* test-only... */ -/*----------------------------------------------------------------------- - * SPI stuff - Define to include SPI control - *----------------------------------------------------------------------- - */ -#define CONFIG_SPI -#endif - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -251,39 +300,13 @@ */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI -#define CFG_FLASH_CFI_DRIVER -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} -#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ -#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ - -#undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) -#endif - #ifdef TEST_ONLY_NAND /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ #define CFG_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE (CFG_NAND + CFG_NAND_CS) +#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ #endif @@ -297,50 +320,42 @@ #endif /*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CFG_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CFG_OCM_DATA_ADDR 0xF8000000 -#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ -#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ -#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ - -#define CFG_GBL_DATA_SIZE 128 /* size for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup - */ -#define CFG_NAND 0xd0000000 + *----------------------------------------------------------------------*/ #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ -/* Memory Bank 0 (Flash) initialization */ +/* Memory Bank 0 (Flash) initialization */ #define CFG_EBC_PB0AP 0x03337200 -#define CFG_EBC_PB0CR 0xfe0bc000 /* BAS=0xFE0,BS=32MB,BU=R/W,BW=32bit */ +#define CFG_EBC_PB0CR 0xfe0bc000 -/* Memory Bank 1 (CRAM) initialization */ +/* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/ +/* Memory Bank 1 (CRAM) initialization */ #define CFG_EBC_PB1AP 0x030400c0 #define CFG_EBC_PB1CR 0x000bc000 -/* Memory Bank 2 (CRAM) initialization */ +/* Memory Bank 2 (CRAM) initialization */ #define CFG_EBC_PB2AP 0x030400c0 #define CFG_EBC_PB2CR 0x020bc000 /* Memory Bank 3 (NAND-FLASH) initialization */ #define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) -/* Memory Bank 4 (CPLD) initialization */ +/* Memory Bank 4 (CPLD) initialization */ #define CFG_EBC_PB4AP 0x04006000 -#define CFG_EBC_PB4CR 0x80018000 /* BAS=0x000,BS=16MB,BU=R/W,BW=32bit */ +#define CFG_EBC_PB4CR (CFG_CPLD_BASE | 0x18000) #define CFG_EBC_CFG 0xf8400000 /*----------------------------------------------------------------------- + * GPIO Setup + *----------------------------------------------------------------------*/ +#define CFG_GPIO_CRAM_CLK 8 +#define CFG_GPIO_CRAM_WAIT 9 +#define CFG_GPIO_CRAM_ADV 10 +#define CFG_GPIO_CRAM_CRE (32 + 21) + +/*----------------------------------------------------------------------- * Definitions for GPIO_0 setup (PPC405EZ specific) * * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs @@ -389,25 +404,6 @@ #define CFG_GPIO1_TSRL 0x00000000 #define CFG_GPIO1_TCR 0xFFFF8014 -/*----------------------------------------------------------------------- - * EPLD Regs. - */ -#define EPLD_BASE 0x80000000 -#define EPLD_ETHRSTBOOT 0x10 -#define EPLD_CTRL 0x14 -#define EPLD_MUXOE 0x16 - -/* - * State definations - */ -#define LOAK_INIT 0x494e4954 /* ASCII "INIT" */ -#define LOAK_NONE 0x4e4f4e45 /* ASCII "NONE" */ -#define LOAK_CRAM 0x4352414d /* ASCII "CRAM" */ -#define LOAK_PSRAM 0x50535241 /* ASCII "PSRA" - PSRAM */ -#define LOAK_OCM 0x4f434d20 /* ASCII "OCM " */ -#define LOAK_ZERO 0x5a45524f /* ASCII "ZERO" */ -#define LOAK_SPL 0x53504c20 /* ASCII "SPL" */ - /* * Internal Definitions * diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 458ebabeb..beaf3851d 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -62,11 +62,14 @@ */ #define CFG_PLL0_OPT 0x04 -#define CFG_USART1 1 - -#define CFG_CONSOLE_UART_DEV DEVICE_USART1 +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 /* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + #define CONFIG_CMDLINE_TAG 1 #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 @@ -75,16 +78,47 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS \ - "console=ttyUS0 root=/dev/mtdblock1 fbmem=600k" + "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k" + +#define CONFIG_BOOTCOMMAND \ + "fsload; bootm $(fileaddr)" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 2 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * These are "locally administered ethernet addresses" generated by + * ./tools/gen_eth_addr + * + * After booting the board for the first time, new addresses should be + * generated and assigned to the environment variables "ethaddr" and + * "eth1addr". + */ +#define CONFIG_ETHADDR "6a:87:71:14:cd:cb" +#define CONFIG_ETH1ADDR "ca:f8:15:e6:3e:e6" +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 +#define CONFIG_NET_MULTI 1 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \ + | CONFIG_BOOTP_GATEWAY) #define CONFIG_COMMANDS (CFG_CMD_BDI \ | CFG_CMD_LOADS \ | CFG_CMD_LOADB \ - /* | CFG_CMD_IMI */ \ + | CFG_CMD_IMI \ /* | CFG_CMD_CACHE */ \ | CFG_CMD_FLASH \ | CFG_CMD_MEMORY \ - /* | CFG_CMD_NET */ \ + | CFG_CMD_NET \ | CFG_CMD_ENV \ /* | CFG_CMD_IRQ */ \ | CFG_CMD_BOOTD \ @@ -96,7 +130,7 @@ /* | CFG_CMD_I2C */ \ | CFG_CMD_REGINFO \ /* | CFG_CMD_DATE */ \ - /* | CFG_CMD_DHCP */ \ + | CFG_CMD_DHCP \ /* | CFG_CMD_AUTOSCRIPT */ \ /* | CFG_CMD_MII */ \ | CFG_CMD_MISC \ @@ -106,19 +140,22 @@ /* | CFG_CMD_SAVES */ \ /* | CFG_CMD_SPI */ \ /* | CFG_CMD_PING */ \ - /* | CFG_CMD_MMC */ \ - /* | CFG_CMD_FAT */ \ - /* | CFG_CMD_IMLS */ \ + | CFG_CMD_MMC \ + | CFG_CMD_FAT \ + | CFG_CMD_IMLS \ /* | CFG_CMD_ITEST */ \ - /* | CFG_CMD_EXT2 */ \ + | CFG_CMD_EXT2 \ + | CFG_CMD_JFFS2 \ ) #include <cmd_confdefs.h> #define CONFIG_ATMEL_USART 1 +#define CONFIG_MACB 1 #define CONFIG_PIO2 1 #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 @@ -150,16 +187,8 @@ #define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) #define CFG_MALLOC_LEN (256*1024) -#define CFG_MALLOC_END \ - ({ \ - DECLARE_GLOBAL_DATA_PTR; \ - CFG_SDRAM_BASE + gd->sdram_size; \ - }) -#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN) - #define CFG_DMA_ALLOC_LEN (16384) -#define CFG_DMA_ALLOC_END (CFG_MALLOC_START) -#define CFG_DMA_ALLOC_START (CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN) + /* Allow 2MB for the kernel run-time image */ #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) #define CFG_BOOTPARAMS_LEN (16 * 1024) diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 1606d0da1..7f55366ca 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -78,7 +78,7 @@ #define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) -#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller - Compact Flash */ +#define CFG_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in internal SRAM) diff --git a/include/configs/ml401.h b/include/configs/ml401.h new file mode 100644 index 000000000..cb159e79d --- /dev/null +++ b/include/configs/ml401.h @@ -0,0 +1,230 @@ +/* + * (C) Copyright 2007 Czech Technical University. + * + * Michal SIMEK <monstr@seznam.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/xilinx/ml401/xparameters.h" + +#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define CONFIG_ML401 1 /* ML401 Board */ + +/* uart */ +#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR +#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE +#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } + +/* setting reset address */ +#define CFG_RESET_ADDRESS TEXT_BASE + +/* ethernet */ +#define CONFIG_EMACLITE 1 +#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES + +/* gpio */ +#define CFG_GPIO_0 1 +#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR + +/* interrupt controller */ +#define CFG_INTC_0 1 +#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR +#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS + +/* timer */ +#define CFG_TIMER_0 1 +#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR +#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ +#define FREQUENCE XILINX_CLOCK_FREQ +#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) + +/* + * memory layout - Example + * TEXT_BASE = 0x1200_0000; + * CFG_SRAM_BASE = 0x1000_0000; + * CFG_SRAM_SIZE = 0x0400_0000; + * + * CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 + * CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 + * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 + * + * 0x1000_0000 CFG_SDRAM_BASE + * FREE + * 0x1200_0000 TEXT_BASE + * U-BOOT code + * 0x1202_0000 + * FREE + * + * STACK + * 0x13F7_F000 CFG_MALLOC_BASE + * MALLOC_AREA 256kB Alloc + * 0x11FB_F000 CFG_MONITOR_BASE + * MONITOR_CODE 256kB Env + * 0x13FF_F000 CFG_GBL_DATA_OFFSET + * GLOBAL_DATA 4kB bd, gd + * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE + */ + +/* ddr sdram - main memory */ +#define CFG_SDRAM_BASE XILINX_RAM_START +#define CFG_SDRAM_SIZE XILINX_RAM_SIZE +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) + +/* global pointer */ +#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ + +/* monitor code */ +#define SIZE 0x40000 +#define CFG_MONITOR_LEN SIZE +#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) +#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN SIZE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +/* stack */ +#define CFG_INIT_SP_OFFSET CFG_MONITOR_BASE + +/*#define RAMENV */ +#define FLASH + +#ifdef FLASH + #define CFG_FLASH_BASE XILINX_FLASH_START + #define CFG_FLASH_SIZE XILINX_FLASH_SIZE + #define CFG_FLASH_CFI 1 + #define CFG_FLASH_CFI_DRIVER 1 + #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ + #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ + #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + + #ifdef RAMENV + #define CFG_ENV_IS_NOWHERE 1 + #define CFG_ENV_SIZE 0x1000 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) + + #else /* !RAMENV */ + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR 0x40000 + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + #endif /* !RAMBOOT */ +#else /* !FLASH */ + /* ENV in RAM */ + #define CFG_NO_FLASH 1 + #define CFG_ENV_IS_NOWHERE 1 + #define CFG_ENV_SIZE 0x1000 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) +#endif /* !FLASH */ + +#ifdef FLASH + #ifdef RAMENV + #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_MISC |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_IRQ |\ + CFG_CMD_ASKENV |\ + CFG_CMD_BDI |\ + CFG_CMD_RUN |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_IMI |\ + CFG_CMD_NET |\ + CFG_CMD_CACHE |\ + CFG_CMD_IMLS |\ + CFG_CMD_FLASH |\ + CFG_CMD_PING \ + ) + #else /* !RAMENV */ + #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_MISC |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_IRQ |\ + CFG_CMD_ASKENV |\ + CFG_CMD_BDI |\ + CFG_CMD_RUN |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_IMI |\ + CFG_CMD_NET |\ + CFG_CMD_CACHE |\ + CFG_CMD_IMLS |\ + CFG_CMD_FLASH |\ + CFG_CMD_PING |\ + CFG_CMD_ENV |\ + CFG_CMD_SAVES \ + ) + + #endif + +#else /* !FLASH */ + #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_MISC |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_IRQ |\ + CFG_CMD_ASKENV |\ + CFG_CMD_BDI |\ + CFG_CMD_RUN |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_IMI |\ + CFG_CMD_NET |\ + CFG_CMD_CACHE |\ + CFG_CMD_PING \ + ) +#endif /* !FLASH */ +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* Miscellaneous configurable options */ +#define CFG_PROMPT "U-Boot-mONStR> " +#define CFG_CBSIZE 512 /* size of console buffer */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ +#define CFG_MAXARGS 15 /* max number of command args */ +#define CFG_LONGHELP +#define CFG_LOAD_ADDR 0x12000000 /* default load address */ + +#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTARGS "root=romfs" +#define CONFIG_HOSTNAME "ml401" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_IPADDR 192.168.0.3 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD + +/* architecture dependent code */ +#define CFG_USR_EXCEP /* user exception */ +#define CFG_HZ 1000 + +/* system ace */ +/*#define CONFIG_SYSTEMACE +#define DEBUG_SYSTEMACE +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION +*/ +#endif /* __CONFIG_H */ diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h new file mode 100644 index 000000000..243a3f6c8 --- /dev/null +++ b/include/configs/mpc7448hpc2.h @@ -0,0 +1,411 @@ +/* + * Copyright (c) 2005 Freescale Semiconductor, Inc. + * + * (C) Copyright 2006 + * Alex Bounine , Tundra Semiconductor Corp. + * Roy Zang , <tie-fei.zang@freescale.com> Freescale Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board specific configuration options for Freescale + * MPC7448HPC2 (High-Performance Computing II) (Taiga) board + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* Board Configuration Definitions */ +/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */ + +#define CONFIG_MPC7448HPC2 + +#define CONFIG_74xx +#define CONFIG_750FX /* this option to enable init of extended BATs */ +#define CONFIG_ALTIVEC /* undef to disable */ + +#define CFG_BOARD_NAME "MPC7448 HPC II" +#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II" + +#define CFG_OCN_CLK 133000000 /* 133 MHz */ +#define CFG_CONFIG_BUS_CLK 133000000 + +#define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */ + +#undef CONFIG_ECC /* disable ECC support */ + +/* Board-specific Initialization Functions to be called */ +#define CFG_BOARD_ASM_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_HAS_ETH1 + +#define CONFIG_ENV_OVERWRITE + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ + +/*#define CFG_HUSH_PARSER */ +#undef CFG_HUSH_PARSER + +#define CFG_PROMPT_HUSH_PS2 "> " + +/* Pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,7448@0" +#define OF_TSI "tsi108@c0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/tsi108@c0000000/serial@7808" + +/* + * The following defines let you select what serial you want to use + * for your console driver. + * + * what to do: + * If you have hacked a serial cable onto the second DUART channel, + * change the CFG_DUART port from 1 to 0 below. + * + */ + +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK CFG_OCN_CLK * 8 + +#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808) +#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08) +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#undef CONFIG_BOOTARGS +/* #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" + * to mount root filesystem over NFS;echo" */ + +#if (CONFIG_BOOTDELAY >= 0) +#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\ + setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \ + ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; " + +#define CONFIG_BOOTARGS "console=ttyS0,115200" +#endif + +#undef CONFIG_EXTRA_ENV_SETTINGS + +#define CONFIG_SERIAL "No. 1" + +/* Networking Configuration */ + +#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */ + +#define CONFIG_TSI108_ETH +#define CONFIG_TSI108_ETH_NUM_PORTS 2 + +#define CONFIG_NET_MULTI + +#define CONFIG_BOOTFILE zImage.initrd.elf +#define CONFIG_LOADADDR 0x400000 + +/*-------------------------------------------------------------------------- */ + +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_ASKENV \ + | CFG_CMD_CACHE \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C \ + | CFG_CMD_SDRAM \ + | CFG_CMD_EEPROM \ + | CFG_CMD_FLASH \ + | CFG_CMD_ENV \ + | CFG_CMD_BSP \ + | CFG_CMD_DHCP \ + | CFG_CMD_PING \ + | CFG_CMD_DATE) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/*set date in u-boot*/ +#define CONFIG_RTC_M48T35A +#define CFG_NVRAM_BASE_ADDR 0xfc000000 +#define CFG_NVRAM_SIZE 0x8000 +/* + * Miscellaneous configurable options + */ +#define CONFIG_VERSION_VARIABLE 1 +#define CONFIG_TSI108_I2C + +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x00400000 /* default load address */ + +#define CFG_HZ 1000 /* decr freq: 1ms ticks */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area + */ + +/* + * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS + * To an unused memory region. The stack will remain in cache until RAM + * is initialized + */ +#undef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ +#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */ + +#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ + +#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */ +#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */ + +#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */ +#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */ + +#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */ + +#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */ + +#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */ + +#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */ +#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */ + +#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */ + +#define PCI0_IO_BASE_BOOTM 0xfd000000 + +#define CFG_RESET_ADDRESS 0x3fffff00 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ + +/* Peripheral Device section */ + +/* + * Resources on the Tsi108 + */ + +#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */ +#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */ + +#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */ + +#undef DISABLE_PBM + +/* + * PCI stuff + * + */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_TSI108_PCI /* include tsi108 pci support */ + +#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +/* PCI MEMORY MAP section */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +/* PCI Memory Space */ +#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS) +#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */ +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */ + +/* PCI I/O Space */ +#define CFG_PCI_IO_BUS 0x00000000 +#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */ + +#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */ + +#define _IO_BASE 0x00000000 /* points to PCI I/O space */ + +/* PCI Config Space mapping */ +#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */ +#define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */ + +#define CFG_IBAT0U 0xFE0003FF +#define CFG_IBAT0L 0xFE000002 + +#define CFG_IBAT1U 0x00007FFF +#define CFG_IBAT1L 0x00000012 + +#define CFG_IBAT2U 0x80007FFF +#define CFG_IBAT2L 0x80000022 + +#define CFG_IBAT3U 0x00000000 +#define CFG_IBAT3L 0x00000000 + +#define CFG_IBAT4U 0x00000000 +#define CFG_IBAT4L 0x00000000 + +#define CFG_IBAT5U 0x00000000 +#define CFG_IBAT5L 0x00000000 + +#define CFG_IBAT6U 0x00000000 +#define CFG_IBAT6L 0x00000000 + +#define CFG_IBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 + +#define CFG_DBAT0U 0xE0003FFF +#define CFG_DBAT0L 0xE000002A + +#define CFG_DBAT1U 0x00007FFF +#define CFG_DBAT1L 0x00000012 + +#define CFG_DBAT2U 0x00000000 +#define CFG_DBAT2L 0x00000000 + +#define CFG_DBAT3U 0xC0000003 +#define CFG_DBAT3L 0xC000002A + +#define CFG_DBAT4U 0x00000000 +#define CFG_DBAT4L 0x00000000 + +#define CFG_DBAT5U 0x00000000 +#define CFG_DBAT5L 0x00000000 + +#define CFG_DBAT6U 0x00000000 +#define CFG_DBAT6L 0x00000000 + +#define CFG_DBAT7U 0x00000000 +#define CFG_DBAT7L 0x00000000 + +/* I2C addresses for the two DIMM SPD chips */ +#define DIMM0_I2C_ADDR 0x51 +#define DIMM1_I2C_ADDR 0x52 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */ +#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_WRITE_SWAPPED_DATA + +#define PHYS_FLASH_SIZE 0x01000000 +#define CFG_MAX_FLASH_SECT (128) + +#define CFG_ENV_IS_IN_NVRAM +#define CFG_ENV_ADDR 0xFC000000 + +#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * L2CR setup -- make sure this is right for your board! + * look in include/mpc74xx.h for the defines used here + */ +#undef CFG_L2 + +#define L2_INIT 0 +#define L2_ENABLE (L2_INIT | L2CR_L2E) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CFG_SERIAL_HANG_IN_EXCEPTION +#endif /* __CONFIG_H */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 8298084f1..6b6acfa87 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -133,8 +133,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with S\n" -#define CONFIG_AUTOBOOT_DELAY_STR "S" /* 1st "password" */ +#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n" +#define CONFIG_AUTOBOOT_DELAY_STR "\n" /* 1st "password" */ #endif /* @@ -416,11 +416,11 @@ extern unsigned long offsetOfEnvironment; #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -/* No command line, one static partition Partition 3 contains jffs2 rootfs */ +/* No command line, one static partition */ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_SIZE 0x00400000 -#define CONFIG_JFFS2_PART_OFFSET 0x00c00000 +#define CONFIG_JFFS2_PART_SIZE 0x01000000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 29f3b408d..1f19621f4 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -33,7 +33,6 @@ *----------------------------------------------------------------------*/ /* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ #ifndef CONFIG_RAINIER -#define CONFIG_SEQUOIA 1 /* Board is Sequoia */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #else #define CONFIG_440GRX 1 /* Specific PPC440GRx */ @@ -75,9 +74,7 @@ * Initial RAM & stack pointer *----------------------------------------------------------------------*/ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ - #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) @@ -381,9 +378,6 @@ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#define CFG_FLASH CFG_FLASH_BASE -#define CFG_NAND 0xD0000000 -#define CFG_CPLD 0xC0000000 /* * On Sequoia CS0 and CS3 are switched when configuring for NAND booting @@ -392,25 +386,25 @@ #define CFG_NAND_CS 3 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x03017200 -#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) +#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000) /* Memory Bank 3 (NAND-FLASH) initialization */ #define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) #else #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ /* Memory Bank 3 (NOR-FLASH) initialization */ #define CFG_EBC_PB3AP 0x03017200 -#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000) +#define CFG_EBC_PB3CR (CFG_FLASH_BASE | 0xda000) /* Memory Bank 0 (NAND-FLASH) initialization */ #define CFG_EBC_PB0AP 0x018003c0 -#define CFG_EBC_PB0CR (CFG_NAND | 0x1c000) +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) #endif /* Memory Bank 2 (CPLD) initialization */ #define CFG_EBC_PB2AP 0x24814580 -#define CFG_EBC_PB2CR (CFG_CPLD | 0x38000) +#define CFG_EBC_PB2CR (CFG_BCSR_BASE | 0x38000) /*----------------------------------------------------------------------- * NAND FLASH diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index 1ee6be174..822455589 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -44,12 +44,17 @@ #define CFG_FLASH_SIZE 0x00400000 #define CFG_RESET_ADDRESS 0xfff00100 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024)) +#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024)) #define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024)) #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 115200 } +/* System Register (GPIO) */ +#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 +#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) + #define CONFIG_COMMANDS (CONFIG__CMD_DFL) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h new file mode 100644 index 000000000..a2f48102f --- /dev/null +++ b/include/configs/xupv2p.h @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2007 Czech Technical University. + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/xilinx/xupv2p/xparameters.h" + +#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define CONFIG_XUPV2P 1 + +/* uart */ +#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR +#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE +#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } + +/* ethernet */ +#define CONFIG_EMAC 1 +#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES + +/* + * setting reset address + * + * TEXT_BASE is set to place, where the U-BOOT run in RAM, but + * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS + * to FLASH memory and after loading bitstream jump to FLASH. + * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze + * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. + */ +#define CFG_RESET_ADDRESS 0x36000000 + +/* gpio */ +#define CFG_GPIO_0 1 +#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR + +/* interrupt controller */ +#define CFG_INTC_0 1 +#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR +#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS + +/* timer */ +#define CFG_TIMER_0 1 +#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR +#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ +#define FREQUENCE XILINX_CLOCK_FREQ +#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) + +/* + * memory layout - Example + * TEXT_BASE = 0x3600_0000; + * CFG_SRAM_BASE = 0x3000_0000; + * CFG_SRAM_SIZE = 0x1000_0000; + * + * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000 + * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000 + * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000 + * + * 0x3000_0000 CFG_SDRAM_BASE + * FREE + * 0x3600_0000 TEXT_BASE + * U-BOOT code + * 0x3602_0000 + * FREE + * + * STACK + * 0x3FF7_F000 CFG_MALLOC_BASE + * MALLOC_AREA 256kB Alloc + * 0x3FFB_F000 CFG_MONITOR_BASE + * MONITOR_CODE 256kB Env + * 0x3FFF_F000 CFG_GBL_DATA_OFFSET + * GLOBAL_DATA 4kB bd, gd + * 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE + */ + +/* ddr sdram - main memory */ +#define CFG_SDRAM_BASE XILINX_RAM_START +#define CFG_SDRAM_SIZE XILINX_RAM_SIZE +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) + +/* global pointer */ +#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ + +/* monitor code */ +#define SIZE 0x40000 +#define CFG_MONITOR_LEN SIZE +#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) +#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN SIZE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +/* stack */ +#define CFG_INIT_SP_OFFSET CFG_MALLOC_BASE + +#define CFG_NO_FLASH 1 +#define CFG_ENV_IS_NOWHERE 1 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) +#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_IRQ |\ + CFG_CMD_BDI |\ + CFG_CMD_NET |\ + CFG_CMD_IMI |\ + CFG_CMD_ECHO |\ + CFG_CMD_CACHE |\ + CFG_CMD_RUN |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_ASKENV |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_MISC |\ + CFG_CMD_PING \ + ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* Miscellaneous configurable options */ +#define CFG_PROMPT "U-Boot-mONStR> " +#define CFG_CBSIZE 512 /* size of console buffer */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ +#define CFG_MAXARGS 15 /* max number of command args */ +#define CFG_LONGHELP +#define CFG_LOAD_ADDR 0x12000000 /* default load address */ + +#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTARGS "root=romfs" +#define CONFIG_HOSTNAME "ml401" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_IPADDR 192.168.0.3 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD + +/* architecture dependent code */ +#define CFG_USR_EXCEP /* user exception */ +#define CFG_HZ 1000 + +#define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \ + "base 0;" \ + "echo" + + +/* system ace */ +/*#define CONFIG_SYSTEMACE +#define DEBUG_SYSTEMACE +#define CFG_SYSTEMACE_BASE 0xCF000000 +#define CFG_SYSTEMACE_WIDTH 16 +#define CONFIG_DOS_PARTITION*/ + +#endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 818462eed..b68ae54b9 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -32,7 +32,6 @@ *----------------------------------------------------------------------*/ /* This config file is used for Yosemite (440EP) and Yellowstone (440GR)*/ #ifndef CONFIG_YELLOWSTONE -#define CONFIG_YOSEMITE 1 /* Board is Yosemite */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ #define CONFIG_HOSTNAME yosemite #else diff --git a/include/configs/yucca.h b/include/configs/yucca.h index eb4859c3e..7f8b0228a 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -120,7 +120,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#undef CONFIG_DDR_ECC /* no ECC support for now */ +#define CONFIG_DDR_ECC 1 /* with ECC support */ /*----------------------------------------------------------------------- * I2C diff --git a/include/fdt.h b/include/fdt.h new file mode 100644 index 000000000..48ccfd910 --- /dev/null +++ b/include/fdt.h @@ -0,0 +1,60 @@ +#ifndef _FDT_H +#define _FDT_H + +#ifndef __ASSEMBLY__ + +struct fdt_header { + uint32_t magic; /* magic word FDT_MAGIC */ + uint32_t totalsize; /* total size of DT block */ + uint32_t off_dt_struct; /* offset to structure */ + uint32_t off_dt_strings; /* offset to strings */ + uint32_t off_mem_rsvmap; /* offset to memory reserve map */ + uint32_t version; /* format version */ + uint32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + uint32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + uint32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + uint32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + uint64_t address; + uint64_t size; +}; + +struct fdt_node_header { + uint32_t tag; + char name[0]; +}; + +struct fdt_property { + uint32_t tag; + uint32_t len; + uint32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(uint32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(uint32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) + +#endif /* _FDT_H */ diff --git a/include/libfdt.h b/include/libfdt.h new file mode 100644 index 000000000..a0b4d5503 --- /dev/null +++ b/include/libfdt.h @@ -0,0 +1,138 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <fdt.h> +#include <libfdt_env.h> + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 +#define FDT_ERR_EXISTS 2 +#define FDT_ERR_NOSPACE 3 + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 +#define FDT_ERR_BADPATH 5 +#define FDT_ERR_BADSTATE 6 + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 7 +#define FDT_ERR_BADMAGIC 8 +#define FDT_ERR_BADVERSION 9 +#define FDT_ERR_BADSTRUCTURE 10 +#define FDT_ERR_BADLAYOUT 11 + +#define FDT_ERR_MAX 11 + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define fdt_set_header(fdt, field, val) \ + ((struct fdt_header *)(fdt))->field = cpu_to_fdt32(val) + +void *fdt_offset_ptr(const void *fdt, int offset, int checklen); + +#define fdt_offset_ptr_typed(fdt, offset, var) \ + ((typeof(var))(fdt_offset_ptr((fdt), (offset), sizeof(*(var))))) + +int fdt_move(const void *fdt, void *buf, int bufsize); + +/* Read-only functions */ +char *fdt_string(const void *fdt, int stroffset); + +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +int fdt_path_offset(const void *fdt, const char *path); + +struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); + +uint32_t fdt_next_tag(const void *fdt, int offset, + int *nextoffset, char **namep); + +/* Write-in-place functions */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +#define fdt_setprop_inplace_typed(fdt, nodeoffset, name, val) \ + ({ \ + typeof(val) x = val; \ + fdt_setprop_inplace(fdt, nodeoffset, name, &x, sizeof(x)); \ + }) + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); +int fdt_nop_node(void *fdt, int nodeoffset); + +/* Sequential-write functions */ +int fdt_create(void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +#define fdt_property_typed(fdt, name, val) \ + ({ \ + typeof(val) x = (val); \ + fdt_property((fdt), (name), &x, sizeof(x)); \ + }) +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/* Read-write functions */ +int fdt_open_into(void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); +#define fdt_setprop_typed(fdt, nodeoffset, name, val) \ + ({ \ + typeof(val) x = (val); \ + fdt_setprop((fdt), (nodeoffset), (name), &x, sizeof(x)); \ + }) +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) +int fdt_delprop(void *fdt, int nodeoffset, const char *name); +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); +int fdt_del_node(void *fdt, int nodeoffset); + +/* Extra functions */ +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ diff --git a/include/libfdt_env.h b/include/libfdt_env.h new file mode 100644 index 000000000..6c7785254 --- /dev/null +++ b/include/libfdt_env.h @@ -0,0 +1,16 @@ +#ifndef _LIBFDT_ENV_H +#define _LIBFDT_ENV_H + +#include <stddef.h> +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/string.h> + +struct fdt_header *fdt; /* Pointer to the working fdt */ + +#define fdt32_to_cpu(x) __be32_to_cpu(x) +#define cpu_to_fdt32(x) __cpu_to_be32(x) +#define fdt64_to_cpu(x) __be64_to_cpu(x) +#define cpu_to_fdt64(x) __cpu_to_be64(x) + +#endif /* _LIBFDT_ENV_H */ diff --git a/include/linux/mii.h b/include/linux/mii.h new file mode 100644 index 000000000..7c63095fd --- /dev/null +++ b/include/linux/mii.h @@ -0,0 +1,158 @@ +/* + * linux/mii.h: definitions for MII-compatible transceivers + * Originally drivers/net/sunhme.h. + * + * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) + */ + +#ifndef __LINUX_MII_H__ +#define __LINUX_MII_H__ + +/* Generic MII registers. */ + +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ + +/* Basic mode control register. */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ +#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ +#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset the DP83840 */ + +/* Basic mode status register. */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_RFAULT 0x0010 /* Remote fault detected */ +#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ +#define BMSR_RESV 0x07c0 /* Unused... */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ + +/* Advertisement control register. */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_RESV 0x1c00 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ + +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) + +/* Link partner ability register. */ +#define LPA_SLCT 0x001f /* Same as advertise selector */ +#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ +#define LPA_RESV 0x1c00 /* Unused... */ +#define LPA_RFAULT 0x2000 /* Link partner faulted */ +#define LPA_LPACK 0x4000 /* Link partner acked us */ +#define LPA_NPAGE 0x8000 /* Next page bit */ + +#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) +#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) + +/* Expansion register for auto-negotiation. */ +#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ +#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ +#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ + +/* N-way test register. */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ + + +/** + * mii_nway_result + * @negotiated: value of MII ANAR and'd with ANLPAR + * + * Given a set of MII abilities, check each bit and returns the + * currently supported media, in the priority order defined by + * IEEE 802.3u. We use LPA_xxx constants but note this is not the + * value of LPA solely, as described above. + * + * The one exception to IEEE 802.3u is that 100baseT4 is placed + * between 100T-full and 100T-half. If your phy does not support + * 100T4 this is fine. If your phy places 100T4 elsewhere in the + * priority order, you will need to roll your own function. + */ +static inline unsigned int mii_nway_result (unsigned int negotiated) +{ + unsigned int ret; + + if (negotiated & LPA_100FULL) + ret = LPA_100FULL; + else if (negotiated & LPA_100BASE4) + ret = LPA_100BASE4; + else if (negotiated & LPA_100HALF) + ret = LPA_100HALF; + else if (negotiated & LPA_10FULL) + ret = LPA_10FULL; + else + ret = LPA_10HALF; + + return ret; +} + +/** + * mii_duplex + * @duplex_lock: Non-zero if duplex is locked at full + * @negotiated: value of MII ANAR and'd with ANLPAR + * + * A small helper function for a common case. Returns one + * if the media is operating or locked at full duplex, and + * returns zero otherwise. + */ +static inline unsigned int mii_duplex (unsigned int duplex_lock, + unsigned int negotiated) +{ + if (duplex_lock) + return 1; + if (mii_nway_result(negotiated) & LPA_DUPLEX) + return 1; + return 0; +} + + +#endif /* __LINUX_MII_H__ */ diff --git a/include/linux/stat.h b/include/linux/stat.h index 4d05aa92d..43fd53fc9 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -7,7 +7,7 @@ extern "C" { #endif -#define S_IFMT 00170000 /* type of file */ +#define S_IFMT 00170000 /* type of file */ #define S_IFSOCK 0140000 /* named socket */ #define S_IFLNK 0120000 /* symbolic link */ #define S_IFREG 0100000 /* regular */ @@ -49,20 +49,20 @@ struct stat { ino_t st_ino; /* file id */ mode_t st_mode; /* ownership/protection */ nlink_t st_nlink; /* number of links */ - uid_t st_uid; /* user id */ - gid_t st_gid; /* group id */ + uid_t st_uid; /* user id */ + gid_t st_gid; /* group id */ dev_t st_rdev; off_t st_size; /* file size in # of bytes */ - unsigned long st_blksize; /* block size */ - unsigned long st_blocks; /* file size in # of blocks */ - unsigned long st_atime; /* time file was last accessed */ - unsigned long __unused1; - unsigned long st_mtime; /* time file was last modified */ - unsigned long __unused2; - unsigned long st_ctime; /* time file status was last changed */ - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; + unsigned long st_blksize; /* block size */ + unsigned long st_blocks; /* file size in # of blocks */ + unsigned long st_atime; /* time file was last accessed */ + unsigned long __unused1; + unsigned long st_mtime; /* time file was last modified */ + unsigned long __unused2; + unsigned long st_ctime; /* time file status was last changed */ + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; }; #endif /* __PPC__ */ @@ -97,34 +97,59 @@ struct stat { #if defined (__MIPS__) struct stat { - dev_t st_dev; - long st_pad1[3]; - ino_t st_ino; - mode_t st_mode; - nlink_t st_nlink; - uid_t st_uid; - gid_t st_gid; - dev_t st_rdev; - long st_pad2[2]; - off_t st_size; - long st_pad3; + dev_t st_dev; + long st_pad1[3]; + ino_t st_ino; + mode_t st_mode; + nlink_t st_nlink; + uid_t st_uid; + gid_t st_gid; + dev_t st_rdev; + long st_pad2[2]; + off_t st_size; + long st_pad3; /* * Actually this should be timestruc_t st_atime, st_mtime and st_ctime * but we don't have it under Linux. */ - time_t st_atime; - long reserved0; - time_t st_mtime; - long reserved1; - time_t st_ctime; - long reserved2; - long st_blksize; - long st_blocks; - long st_pad4[14]; + time_t st_atime; + long reserved0; + time_t st_mtime; + long reserved1; + time_t st_ctime; + long reserved2; + long st_blksize; + long st_blocks; + long st_pad4[14]; }; #endif /* __MIPS__ */ +#if defined(__AVR32__) + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* __AVR32__ */ + #ifdef __cplusplus } #endif diff --git a/include/ppc405.h b/include/ppc405.h index 08f10d27b..a2503a93d 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -570,6 +570,8 @@ #define SDR_ICTX0_STAT 0x40000000 #define SDR_ICTX1_STAT 0x20000000 +#define SDR_PINSTP 0x40 + /****************************************************************************** * Control ******************************************************************************/ diff --git a/include/ppc440.h b/include/ppc440.h index 9b15c2c56..bc1d7aad7 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -148,7 +148,7 @@ #define sdrcfgd (SDR_DCR_BASE+0x1) #define sdr_sdstp0 0x0020 /* */ #define sdr_sdstp1 0x0021 /* */ -#define sdr_pinstp 0x0040 +#define SDR_PINSTP 0x0040 #define sdr_sdcs 0x0060 #define sdr_ecid0 0x0080 #define sdr_ecid1 0x0081 @@ -3290,29 +3290,6 @@ #define GPIO1_ISR3H (GPIO1_BASE+0x44) #endif -#define GPIO_GROUP_MAX 2 -#define GPIO_MAX 32 -#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */ -#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */ -#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */ -#define GPIO_MASK 0xC0000000 /* GPIO_MASK */ -#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */ - /* For the other GPIO number, you must shift */ - -#define GPIO_VAL(gpio) (0x80000000 >> (gpio)) - -#ifndef __ASSEMBLY__ - -typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t; -typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; - -typedef struct { unsigned long add; /* gpio core base address */ - gpio_driver_t in_out; /* Driver Setting */ - gpio_select_t alt_nb; /* Selected Alternate */ -} gpio_param_s; - -#endif /* __ASSEMBLY__ */ - /* * Macros for accessing the indirect EBC registers */ diff --git a/include/serial.h b/include/serial.h index 48800595d..f7412fd17 100644 --- a/include/serial.h +++ b/include/serial.h @@ -23,7 +23,7 @@ extern struct serial_device serial_scc_device; extern struct serial_device * default_serial_console (void); #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ - || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) + || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CFG_NS16550_SERIAL) diff --git a/include/tsi108.h b/include/tsi108.h new file mode 100644 index 000000000..ba62e7abe --- /dev/null +++ b/include/tsi108.h @@ -0,0 +1,221 @@ +/***************************************************************************** + * (C) Copyright 2003; Tundra Semiconductor Corp. + * (C) Copyright 2006; Freescale Semiconductor Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + *****************************************************************************/ + +/* + * FILENAME: tsi108.h + * + * Originator: Alex Bounine + * + * DESCRIPTION: + * Common definitions for the Tundra Tsi108 bridge chip + * + */ + +#ifndef _TSI108_H_ +#define _TSI108_H_ + +#define TSI108_HLP_REG_OFFSET (0x0000) +#define TSI108_PCI_REG_OFFSET (0x1000) +#define TSI108_CLK_REG_OFFSET (0x2000) +#define TSI108_PB_REG_OFFSET (0x3000) +#define TSI108_SD_REG_OFFSET (0x4000) +#define TSI108_MPIC_REG_OFFSET (0x7400) + +#define PB_ID (0x000) +#define PB_RSR (0x004) +#define PB_BUS_MS_SELECT (0x008) +#define PB_ISR (0x00C) +#define PB_ARB_CTRL (0x018) +#define PB_PVT_CTRL2 (0x034) +#define PB_SCR (0x400) +#define PB_ERRCS (0x404) +#define PB_AERR (0x408) +#define PB_REG_BAR (0x410) +#define PB_OCN_BAR1 (0x414) +#define PB_OCN_BAR2 (0x418) +#define PB_SDRAM_BAR1 (0x41C) +#define PB_SDRAM_BAR2 (0x420) +#define PB_MCR (0xC00) +#define PB_MCMD (0xC04) + +#define HLP_B0_ADDR (0x000) +#define HLP_B1_ADDR (0x010) +#define HLP_B2_ADDR (0x020) +#define HLP_B3_ADDR (0x030) + +#define HLP_B0_MASK (0x004) +#define HLP_B1_MASK (0x014) +#define HLP_B2_MASK (0x024) +#define HLP_B3_MASK (0x034) + +#define HLP_B0_CTRL0 (0x008) +#define HLP_B1_CTRL0 (0x018) +#define HLP_B2_CTRL0 (0x028) +#define HLP_B3_CTRL0 (0x038) + +#define HLP_B0_CTRL1 (0x00C) +#define HLP_B1_CTRL1 (0x01C) +#define HLP_B2_CTRL1 (0x02C) +#define HLP_B3_CTRL1 (0x03C) + +#define PCI_CSR (0x004) +#define PCI_P2O_BAR0 (0x010) +#define PCI_P2O_BAR0_UPPER (0x014) +#define PCI_P2O_BAR2 (0x018) +#define PCI_P2O_BAR2_UPPER (0x01C) +#define PCI_P2O_BAR3 (0x020) +#define PCI_P2O_BAR3_UPPER (0x024) + +#define PCI_MISC_CSR (0x040) +#define PCI_P2O_PAGE_SIZES (0x04C) + +#define PCI_PCIX_STAT (0x0F4) + +#define PCI_IRP_STAT (0x184) + +#define PCI_PFAB_BAR0 (0x204) +#define PCI_PFAB_BAR0_UPPER (0x208) +#define PCI_PFAB_IO (0x20C) +#define PCI_PFAB_IO_UPPER (0x210) + +#define PCI_PFAB_MEM32 (0x214) +#define PCI_PFAB_MEM32_REMAP (0x218) +#define PCI_PFAB_MEM32_MASK (0x21C) + +#define CG_PLL0_CTRL0 (0x210) +#define CG_PLL0_CTRL1 (0x214) +#define CG_PLL1_CTRL0 (0x220) +#define CG_PLL1_CTRL1 (0x224) +#define CG_PWRUP_STATUS (0x234) + +#define MPIC_CSR(n) (0x30C + (n * 0x40)) + +#define SD_CTRL (0x000) +#define SD_STATUS (0x004) +#define SD_TIMING (0x008) +#define SD_REFRESH (0x00C) +#define SD_INT_STATUS (0x010) +#define SD_INT_ENABLE (0x014) +#define SD_INT_SET (0x018) +#define SD_D0_CTRL (0x020) +#define SD_D1_CTRL (0x024) +#define SD_D0_BAR (0x028) +#define SD_D1_BAR (0x02C) +#define SD_ECC_CTRL (0x040) +#define SD_DLL_STATUS (0x250) + +#define TS_SD_CTRL_ENABLE (1 << 31) + +#define PB_ERRCS_ES (1 << 1) +#define PB_ISR_PBS_RD_ERR (1 << 8) +#define PCI_IRP_STAT_P_CSR (1 << 23) + +/* + * I2C : Register address offset definitions + */ +#define I2C_CNTRL1 (0x00000000) +#define I2C_CNTRL2 (0x00000004) +#define I2C_RD_DATA (0x00000008) +#define I2C_TX_DATA (0x0000000c) + +/* + * I2C : Register Bit Masks and Reset Values + * definitions for every register + */ + +/* I2C_CNTRL1 : Reset Value */ +#define I2C_CNTRL1_RESET_VALUE (0x0000000a) + +/* I2C_CNTRL1 : Register Bits Masks Definitions */ +#define I2C_CNTRL1_DEVCODE (0x0000000f) +#define I2C_CNTRL1_PAGE (0x00000700) +#define I2C_CNTRL1_BYTADDR (0x00ff0000) +#define I2C_CNTRL1_I2CWRITE (0x01000000) + +/* I2C_CNTRL1 : Read/Write Bit Mask Definition */ +#define I2C_CNTRL1_RWMASK (0x01ff070f) + +/* I2C_CNTRL1 : Unused/Reserved bits Definition */ +#define I2C_CNTRL1_RESERVED (0xfe00f8f0) + +/* I2C_CNTRL2 : Reset Value */ +#define I2C_CNTRL2_RESET_VALUE (0x00000000) + +/* I2C_CNTRL2 : Register Bits Masks Definitions */ +#define I2C_CNTRL2_SIZE (0x00000003) +#define I2C_CNTRL2_LANE (0x0000000c) +#define I2C_CNTRL2_MULTIBYTE (0x00000010) +#define I2C_CNTRL2_START (0x00000100) +#define I2C_CNTRL2_WR_STATUS (0x00010000) +#define I2C_CNTRL2_RD_STATUS (0x00020000) +#define I2C_CNTRL2_I2C_TO_ERR (0x04000000) +#define I2C_CNTRL2_I2C_CFGERR (0x08000000) +#define I2C_CNTRL2_I2C_CMPLT (0x10000000) + +/* I2C_CNTRL2 : Read/Write Bit Mask Definition */ +#define I2C_CNTRL2_RWMASK (0x0000011f) + +/* I2C_CNTRL2 : Unused/Reserved bits Definition */ +#define I2C_CNTRL2_RESERVED (0xe3fcfee0) + +/* I2C_RD_DATA : Reset Value */ +#define I2C_RD_DATA_RESET_VALUE (0x00000000) + +/* I2C_RD_DATA : Register Bits Masks Definitions */ +#define I2C_RD_DATA_RBYTE0 (0x000000ff) +#define I2C_RD_DATA_RBYTE1 (0x0000ff00) +#define I2C_RD_DATA_RBYTE2 (0x00ff0000) +#define I2C_RD_DATA_RBYTE3 (0xff000000) + +/* I2C_RD_DATA : Read/Write Bit Mask Definition */ +#define I2C_RD_DATA_RWMASK (0x00000000) + +/* I2C_RD_DATA : Unused/Reserved bits Definition */ +#define I2C_RD_DATA_RESERVED (0x00000000) + +/* I2C_TX_DATA : Reset Value */ +#define I2C_TX_DATA_RESET_VALUE (0x00000000) + +/* I2C_TX_DATA : Register Bits Masks Definitions */ +#define I2C_TX_DATA_TBYTE0 (0x000000ff) +#define I2C_TX_DATA_TBYTE1 (0x0000ff00) +#define I2C_TX_DATA_TBYTE2 (0x00ff0000) +#define I2C_TX_DATA_TBYTE3 (0xff000000) + +/* I2C_TX_DATA : Read/Write Bit Mask Definition */ +#define I2C_TX_DATA_RWMASK (0xffffffff) + +/* I2C_TX_DATA : Unused/Reserved bits Definition */ +#define I2C_TX_DATA_RESERVED (0x00000000) + +#define TSI108_I2C_OFFSET 0x7000 /* offset for general use I2C channel */ +#define TSI108_I2C_SDRAM_OFFSET 0x4400 /* offset for SPD I2C channel */ + +#define I2C_EEPROM_DEVCODE 0xA /* standard I2C EEPROM device code */ + +/* I2C status codes */ + +#define TSI108_I2C_SUCCESS 0 +#define TSI108_I2C_PARAM_ERR 1 +#define TSI108_I2C_TIMEOUT_ERR 2 +#define TSI108_I2C_IF_BUSY 3 +#define TSI108_I2C_IF_ERROR 4 + +#endif /* _TSI108_H_ */ diff --git a/lib_avr32/avr32_linux.c b/lib_avr32/avr32_linux.c index d128dfb53..6095e2ff2 100644 --- a/lib_avr32/avr32_linux.c +++ b/lib_avr32/avr32_linux.c @@ -27,7 +27,7 @@ #include <asm/addrspace.h> #include <asm/io.h> #include <asm/setup.h> -#include <asm/arch/platform.h> +#include <asm/arch/clk.h> DECLARE_GLOBAL_DATA_PTR; @@ -133,7 +133,7 @@ static struct tag *setup_clock_tags(struct tag *params) params->hdr.size = tag_size(tag_clock); params->u.clock.clock_id = ACLOCK_HSB; params->u.clock.clock_flags = 0; - params->u.clock.clock_hz = pm_get_clock_freq(CLOCK_HSB); + params->u.clock.clock_hz = get_hsb_clk_rate(); #endif return tag_next(params); diff --git a/lib_avr32/board.c b/lib_avr32/board.c index 02c106b80..265328aa4 100644 --- a/lib_avr32/board.c +++ b/lib_avr32/board.c @@ -47,11 +47,14 @@ static unsigned long mem_malloc_start = 0; static unsigned long mem_malloc_end = 0; static unsigned long mem_malloc_brk = 0; -/* The malloc area is wherever the board wants it to be */ +/* The malloc area is right below the monitor image in RAM */ static void mem_malloc_init(void) { - mem_malloc_start = CFG_MALLOC_START; - mem_malloc_end = CFG_MALLOC_END; + unsigned long monitor_addr; + + monitor_addr = CFG_MONITOR_BASE + gd->reloc_off; + mem_malloc_end = monitor_addr; + mem_malloc_start = mem_malloc_end - CFG_MALLOC_LEN; mem_malloc_brk = mem_malloc_start; printf("malloc: Using memory from 0x%08lx to 0x%08lx\n", @@ -73,6 +76,50 @@ void *sbrk(ptrdiff_t increment) return ((void *)old); } +#ifdef CFG_DMA_ALLOC_LEN +#include <asm/cacheflush.h> +#include <asm/io.h> + +static unsigned long dma_alloc_start; +static unsigned long dma_alloc_end; +static unsigned long dma_alloc_brk; + +static void dma_alloc_init(void) +{ + unsigned long monitor_addr; + + monitor_addr = CFG_MONITOR_BASE + gd->reloc_off; + dma_alloc_end = monitor_addr - CFG_MALLOC_LEN; + dma_alloc_start = dma_alloc_end - CFG_DMA_ALLOC_LEN; + dma_alloc_brk = dma_alloc_start; + + printf("DMA: Using memory from 0x%08lx to 0x%08lx\n", + dma_alloc_start, dma_alloc_end); + + dcache_invalidate_range(cached(dma_alloc_start), + dma_alloc_end - dma_alloc_start); +} + +void *dma_alloc_coherent(size_t len, unsigned long *handle) +{ + unsigned long paddr = dma_alloc_brk; + + if (dma_alloc_brk + len > dma_alloc_end) + return NULL; + + dma_alloc_brk = ((paddr + len + CFG_DCACHE_LINESZ - 1) + & ~(CFG_DCACHE_LINESZ - 1)); + + *handle = paddr; + return uncached(paddr); +} +#else +static inline void dma_alloc_init(void) +{ + +} +#endif + static int init_baudrate(void) { char tmp[64]; @@ -122,40 +169,152 @@ static void display_flash_config (void) printf("at address 0x%08lx\n", gd->bd->bi_flashstart); } -void start_u_boot (void) +void board_init_f(ulong board_type) { gd_t gd_data; + gd_t *new_gd; + bd_t *bd; + unsigned long *new_sp; + unsigned long monitor_len; + unsigned long monitor_addr; + unsigned long addr; + long sdram_size; /* Initialize the global data pointer */ memset(&gd_data, 0, sizeof(gd_data)); gd = &gd_data; - monitor_flash_len = _edata - _text; - /* Perform initialization sequence */ + board_early_init_f(); cpu_init(); - timer_init(); env_init(); init_baudrate(); serial_init(); console_init_f(); display_banner(); + sdram_size = initdram(board_type); + + /* If we have no SDRAM, we can't go on */ + if (sdram_size <= 0) + panic("No working SDRAM available\n"); + + /* + * Now that we have DRAM mapped and working, we can + * relocate the code and continue running from DRAM. + * + * Reserve memory at end of RAM for (top down in that order): + * - u-boot image + * - heap for malloc() + * - board info struct + * - global data struct + * - stack + */ + addr = CFG_SDRAM_BASE + sdram_size; + monitor_len = _end - _text; + + /* + * Reserve memory for u-boot code, data and bss. + * Round down to next 4 kB limit. + */ + addr -= monitor_len; + addr &= ~(4096UL - 1); + monitor_addr = addr; + + /* Reserve memory for malloc() */ + addr -= CFG_MALLOC_LEN; + +#ifdef CFG_DMA_ALLOC_LEN + /* Reserve DMA memory (must be cache aligned) */ + addr &= ~(CFG_DCACHE_LINESZ - 1); + addr -= CFG_DMA_ALLOC_LEN; +#endif - board_init_memories(); - mem_malloc_init(); + /* Allocate a Board Info struct on a word boundary */ + addr -= sizeof(bd_t); + addr &= ~3UL; + gd->bd = bd = (bd_t *)addr; + + /* Allocate a new global data copy on a 8-byte boundary. */ + addr -= sizeof(gd_t); + addr &= ~7UL; + new_gd = (gd_t *)addr; + + /* And finally, a new, bigger stack. */ + new_sp = (unsigned long *)addr; + gd->stack_end = addr; + *(--new_sp) = 0; + *(--new_sp) = 0; + + /* + * Initialize the board information struct with the + * information we have. + */ + bd->bi_dram[0].start = CFG_SDRAM_BASE; + bd->bi_dram[0].size = sdram_size; + bd->bi_baudrate = gd->baudrate; + + memcpy(new_gd, gd, sizeof(gd_t)); + + relocate_code((unsigned long)new_sp, new_gd, monitor_addr); +} - gd->bd = malloc(sizeof(bd_t)); - memset(gd->bd, 0, sizeof(bd_t)); - gd->bd->bi_baudrate = gd->baudrate; - gd->bd->bi_dram[0].start = CFG_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->sdram_size; +void board_init_r(gd_t *new_gd, ulong dest_addr) +{ + extern void malloc_bin_reloc (void); +#ifndef CFG_ENV_IS_NOWHERE + extern char * env_name_spec; +#endif + cmd_tbl_t *cmdtp; + bd_t *bd; + + gd = new_gd; + bd = gd->bd; + + gd->flags |= GD_FLG_RELOC; + gd->reloc_off = dest_addr - CFG_MONITOR_BASE; + + monitor_flash_len = _edata - _text; + /* + * We have to relocate the command table manually + */ + for (cmdtp = &__u_boot_cmd_start; + cmdtp != &__u_boot_cmd_end; cmdtp++) { + unsigned long addr; + + addr = (unsigned long)cmdtp->cmd + gd->reloc_off; + cmdtp->cmd = (typeof(cmdtp->cmd))addr; + + addr = (unsigned long)cmdtp->name + gd->reloc_off; + cmdtp->name = (typeof(cmdtp->name))addr; + + if (cmdtp->usage) { + addr = (unsigned long)cmdtp->usage + gd->reloc_off; + cmdtp->usage = (typeof(cmdtp->usage))addr; + } +#ifdef CFG_LONGHELP + if (cmdtp->help) { + addr = (unsigned long)cmdtp->help + gd->reloc_off; + cmdtp->help = (typeof(cmdtp->help))addr; + } +#endif + } + + /* there are some other pointer constants we must deal with */ +#ifndef CFG_ENV_IS_NOWHERE + env_name_spec += gd->reloc_off; +#endif + + timer_init(); + mem_malloc_init(); + malloc_bin_reloc(); + dma_alloc_init(); board_init_info(); flash_init(); - if (gd->bd->bi_flashsize) + if (bd->bi_flashsize) display_flash_config(); - if (gd->bd->bi_dram[0].size) + if (bd->bi_dram[0].size) display_dram_config(); gd->bd->bi_boot_params = malloc(CFG_BOOTPARAMS_LEN); @@ -169,6 +328,13 @@ void start_u_boot (void) jumptable_init(); console_init_r(); +#if (CONFIG_COMMANDS & CFG_CMD_NET) +#if defined(CONFIG_NET_MULTI) + puts("Net: "); +#endif + eth_initialize(gd->bd); +#endif + for (;;) { main_loop(); } diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile index 3197fe1c9..a7aaef7a3 100644 --- a/lib_blackfin/Makefile +++ b/lib_blackfin/Makefile @@ -1,7 +1,7 @@ # # U-boot Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c index 1b0d90ae6..3b9c4df98 100644 --- a/lib_blackfin/bf533_linux.c +++ b/lib_blackfin/bf533_linux.c @@ -1,7 +1,7 @@ /* * U-boot - bf533_linux.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* Dummy functions, currently not in Use */ diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c index 85b115076..1553f1b5a 100644 --- a/lib_blackfin/bf533_string.c +++ b/lib_blackfin/bf533_string.c @@ -1,7 +1,7 @@ /* * U-boot - bf533_string.c Contains library routines. * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,22 +21,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> #include <asm/setup.h> -#include <asm/page.h> #include <config.h> #include <asm/blackfin.h> #include <asm/io.h> - -extern void blackfin_icache_flush_range(const void *, const void *); -extern void blackfin_dcache_flush_range(const void *, const void *); -extern void *memcpy_ASM(void *dest, const void *src, size_t count); - -void *dma_memcpy(void *, const void *, size_t); +#include "cache.h" char *strcpy(char *dest, const char *src) { @@ -118,44 +112,7 @@ int strncmp(const char *cs, const char *ct, size_t count) return __res1; } -/* - * memcpy - Copy one area of memory to another - * @dest: Where to copy to - * @src: Where to copy from - * @count: The size of the area. - * - * You should not use this function to access IO space, use memcpy_toio() - * or memcpy_fromio() instead. - */ -void *memcpy(void *dest, const void *src, size_t count) -{ - char *tmp = (char *)dest, *s = (char *)src; - - /* L1_ISRAM can only be accessed via dma */ - if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) { - /* L1 is the destination */ - dma_memcpy(dest, src, count); - - if (icache_status()) { - blackfin_icache_flush_range(src, src + count); - } - } else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) { - /* L1 is the source */ - dma_memcpy(dest, src, count); - - if (icache_status()) { - blackfin_icache_flush_range(dest, dest + count); - } - if (dcache_status()) { - blackfin_dcache_flush_range(dest, dest + count); - } - } else { - memcpy_ASM(dest, src, count); - } - return dest; -} - -void *dma_memcpy(void *dest, const void *src, size_t count) +static void *dma_memcpy(void *dest, const void *src, size_t count) { *pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR; @@ -189,3 +146,40 @@ void *dma_memcpy(void *dest, const void *src, size_t count) src += count; return dest; } + +/* + * memcpy - Copy one area of memory to another + * @dest: Where to copy to + * @src: Where to copy from + * @count: The size of the area. + * + * You should not use this function to access IO space, use memcpy_toio() + * or memcpy_fromio() instead. + */ +extern void *memcpy_ASM(void *dest, const void *src, size_t count); +void *memcpy(void *dest, const void *src, size_t count) +{ + char *tmp = (char *) dest, *s = (char *) src; + + if (dcache_status()) { + blackfin_dcache_flush_range(src, src+count); + } + /* L1_ISRAM can only be accessed via dma */ + if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) { + /* L1 is the destination */ + dma_memcpy(dest,src,count); + } else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) { + /* L1 is the source */ + dma_memcpy(dest,src,count); + + if (icache_status()) { + blackfin_icache_flush_range(dest, dest+count); + } + if (dcache_status()) { + blackfin_dcache_invalidate_range(dest, dest+count); + } + } else { + memcpy_ASM(dest,src,count); + } + return dest; +} diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h index e0b96da87..1353421c3 100644 --- a/lib_blackfin/blackfin_board.h +++ b/lib_blackfin/blackfin_board.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin_board.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_BOARD_H__ diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index 1a0a2826c..1538da3f2 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -1,7 +1,7 @@ /* * U-boot - board.c First C file to be called contains init routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -182,7 +182,7 @@ void init_cplbtables(void) icplb_table[j][1] = L1_IMEMORY; j++; - for (i = 0; i <= CONFIG_MEM_SIZE / 4; i++) { + for (i = 0; i < CONFIG_MEM_SIZE / 4; i++) { icplb_table[j][0] = (i * 4 * 1024 * 1024); if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE && (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) { @@ -193,14 +193,19 @@ void init_cplbtables(void) j++; } #if defined(CONFIG_BF561) + /* MAC space */ + icplb_table[j][0] = 0x2C000000; + icplb_table[j][1] = SDRAM_INON_CHBL; + j++; /* Async Memory space */ for (i = 0; i < 3; i++) { - icplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024; - icplb_table[j++][1] = SDRAM_IGENERIC; + icplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024; + icplb_table[j][1] = SDRAM_INON_CHBL; + j++; } #else icplb_table[j][0] = 0x20000000; - icplb_table[j][1] = SDRAM_IGENERIC; + icplb_table[j][1] = SDRAM_INON_CHBL; #endif j = 0; dcplb_table[j][0] = 0xFF800000; @@ -220,13 +225,15 @@ void init_cplbtables(void) #if defined(CONFIG_BF561) /* MAC space */ - dcplb_table[j++][0] = CONFIG_ASYNC_EBIU_BASE; - dcplb_table[j++][1] = SDRAM_EBIU; + dcplb_table[j][0] = 0x2C000000; + dcplb_table[j][1] = SDRAM_EBIU; + j++; /* Flash space */ - for (i = 0; i < 2; i++) { - dcplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024; - dcplb_table[j++][1] = SDRAM_EBIU; + for (i = 0; i < 3; i++) { + dcplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024; + dcplb_table[j][1] = SDRAM_EBIU; + j++; } #else dcplb_table[j][0] = 0x20000000; diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c index a15914b10..9d71bcb54 100644 --- a/lib_blackfin/cache.c +++ b/lib_blackfin/cache.c @@ -1,7 +1,7 @@ /* * U-boot - cache.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,17 +21,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* for now: just dummy functions to satisfy the linker */ #include <config.h> #include <common.h> #include <asm/blackfin.h> - -extern void blackfin_icache_flush_range(unsigned long, unsigned long); -extern void blackfin_dcache_flush_range(unsigned long, unsigned long); +#include "cache.h" void flush_cache(unsigned long dummy1, unsigned long dummy2) { @@ -43,9 +41,9 @@ void flush_cache(unsigned long dummy1, unsigned long dummy2) return; if (icache_status()) - blackfin_icache_flush_range(dummy1, dummy1 + dummy2); + blackfin_icache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2)); if (dcache_status()) - blackfin_dcache_flush_range(dummy1, dummy1 + dummy2); + blackfin_dcache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2)); return; } diff --git a/lib_blackfin/cache.h b/lib_blackfin/cache.h new file mode 100644 index 000000000..3ea6809d3 --- /dev/null +++ b/lib_blackfin/cache.h @@ -0,0 +1,35 @@ +/* + * U-boot - prototypes for cache handling functions. + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _LIB_BLACKFIN_CACHE_H_ +#define _LIB_BLACKFIN_CACHE_H_ + +extern void blackfin_icache_flush_range(const void *, const void *); +extern void blackfin_dcache_flush_range(const void *, const void *); +extern void blackfin_dcache_invalidate_range(const void *, const void *); + +#endif diff --git a/lib_blackfin/memcmp.S b/lib_blackfin/memcmp.S index fcea5b3da..9b5883294 100644 --- a/lib_blackfin/memcmp.S +++ b/lib_blackfin/memcmp.S @@ -1,17 +1,8 @@ /* - * File: arch/blackfin/lib/memcmp.S - * Based on: - * Author: + * File: memcmp.S * - * Created: - * Description: - * - * Rev: $Id: memcmp.S 2386 2006-11-01 04:57:26Z magicyang $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S index a73ff9071..24577bebd 100644 --- a/lib_blackfin/memcpy.S +++ b/lib_blackfin/memcpy.S @@ -1,22 +1,8 @@ /* - * File: arch/blackfin/lib/memcpy.S - * Based on: - * Author: + * File: memcpy.S * - * Created: - * Description: internal version of memcpy(), issued by the compiler - * to copy blocks of data around. - * This is really memmove() - it has to be able to deal with - * possible overlaps, because that ambiguity is when the compiler - * gives up and calls a function. We have our own, internal version - * so that we get something we trust, even if the user has redefined - * the normal symbol. - * Rev: $Id: memcpy.S 2775 2007-02-21 13:58:44Z hennerich $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,6 +19,7 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ + .align 2 .globl _memcpy_ASM; diff --git a/lib_blackfin/memmove.S b/lib_blackfin/memmove.S index 79558f951..46f79ed18 100644 --- a/lib_blackfin/memmove.S +++ b/lib_blackfin/memmove.S @@ -1,17 +1,8 @@ /* - * File: arch/blackfin/lib/memmove.S - * Based on: - * Author: + * File: memmove.S * - * Created: - * Description: - * - * Rev: $Id: memmove.S 2205 2006-09-23 07:53:49Z vapier $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/lib_blackfin/memset.S b/lib_blackfin/memset.S index 7e6ee198e..c33c55112 100644 --- a/lib_blackfin/memset.S +++ b/lib_blackfin/memset.S @@ -1,17 +1,8 @@ /* - * File: arch/blackfin/lib/memset.S - * Based on: - * Author: + * File: memset.S * - * Created: - * Description: - * - * Rev: $Id: memset.S 2769 2007-02-19 16:45:53Z hennerich $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,7 +20,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - .align 2 /* diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c index da55711dd..bf1ca535f 100644 --- a/lib_blackfin/muldi3.c +++ b/lib_blackfin/muldi3.c @@ -1,7 +1,7 @@ /* * U-boot - muldi3.c contains routines for mult and div * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* Generic function got from GNU gcc package, libgcc2.c */ diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c index 026d247e5..c95125ad3 100644 --- a/lib_microblaze/board.c +++ b/lib_microblaze/board.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK <monstr@monstr.eu> * Yasushi SHOJI <yashi@atmark-techno.com> * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -30,8 +32,18 @@ DECLARE_GLOBAL_DATA_PTR; -const char version_string[] = - U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"; +const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")"; + +#ifdef CFG_GPIO_0 +extern int gpio_init (void); +#endif +#ifdef CFG_INTC_0 +extern int interrupts_init (void); +#endif +#if (CONFIG_COMMANDS & CFG_CMD_NET) +extern int eth_init (bd_t * bis); +extern int getenv_IPaddr (char *); +#endif /* * Begin and End of memory area for malloc(), and current "brk" @@ -40,6 +52,18 @@ static ulong mem_malloc_start; static ulong mem_malloc_end; static ulong mem_malloc_brk; +/* + * The Malloc area is immediately below the monitor copy in DRAM + * aka CFG_MONITOR_BASE - Note there is no need for reloc_off + * as our monitory code is run from SDRAM + */ +static void mem_malloc_init (void) +{ + mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN); + mem_malloc_start = CFG_MALLOC_BASE; + mem_malloc_brk = mem_malloc_start; + memset ((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start); +} void *sbrk (ptrdiff_t increment) { @@ -50,7 +74,7 @@ void *sbrk (ptrdiff_t increment) return (NULL); } mem_malloc_brk = new; - return ((void *) old); + return ((void *)old); } /* @@ -68,24 +92,36 @@ void *sbrk (ptrdiff_t increment) typedef int (init_fnc_t) (void); init_fnc_t *init_sequence[] = { - serial_init, /* serial communications setup */ + env_init, + serial_init, +#ifdef CFG_GPIO_0 + gpio_init, +#endif +#ifdef CFG_INTC_0 + interrupts_init, +#endif NULL, }; -void board_init(void) +void board_init (void) { bd_t *bd; init_fnc_t **init_fnc_ptr; - - /* Pointer is writable since we allocated a register for it. */ - gd = (gd_t *)CFG_GBL_DATA_OFFSET; - memset((void *)gd, 0, CFG_GBL_DATA_SIZE); - - gd->bd = (bd_t *)(gd+1); /* At end of global data */ + gd = (gd_t *) CFG_GBL_DATA_OFFSET; +#if (CONFIG_COMMANDS & CFG_CMD_FLASH) + ulong flash_size = 0; +#endif + asm ("nop"); /* FIXME gd is not initialize - wait */ + memset ((void *)gd, 0, CFG_GBL_DATA_SIZE); + gd->bd = (bd_t *) (gd + 1); /* At end of global data */ gd->baudrate = CONFIG_BAUDRATE; - bd = gd->bd; bd->bi_baudrate = CONFIG_BAUDRATE; + bd->bi_memstart = CFG_SDRAM_BASE; + bd->bi_memsize = CFG_SDRAM_SIZE; + + /* Initialise malloc() area */ + mem_malloc_init (); for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { WATCHDOG_RESET (); @@ -94,6 +130,37 @@ void board_init(void) } } +#if (CONFIG_COMMANDS & CFG_CMD_FLASH) + bd->bi_flashstart = CFG_FLASH_BASE; + if (0 < (flash_size = flash_init ())) { + bd->bi_flashsize = flash_size; + bd->bi_flashoffset = CFG_FLASH_BASE + flash_size; + } else { + puts ("Flash init FAILED"); + bd->bi_flashstart = 0; + bd->bi_flashsize = 0; + bd->bi_flashoffset = 0; + } +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + char *s, *e; + int i; + /* board MAC address */ + s = getenv ("ethaddr"); + for (i = 0; i < 6; ++i) { + bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + /* IP Address */ + bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); + eth_init (bd); +#endif + + /* relocate environment function pointers etc. */ + env_relocate (); + /* main_loop */ for (;;) { WATCHDOG_RESET (); @@ -104,5 +171,5 @@ void board_init(void) void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); - for (;;); + for (;;) ; } diff --git a/lib_microblaze/microblaze_linux.c b/lib_microblaze/microblaze_linux.c index b3a081551..2c7885c1f 100644 --- a/lib_microblaze/microblaze_linux.c +++ b/lib_microblaze/microblaze_linux.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK <monstr@monstr.eu> * Yasushi SHOJI <yashi@atmark-techno.com> * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -24,8 +26,146 @@ #include <common.h> #include <command.h> +#include <image.h> +#include <zlib.h> +#include <asm/byteorder.h> -void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], - ulong addr, ulong *len_ptr, int verify) +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# include <status_led.h> +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif + +extern image_header_t header; /* from cmd_bootm.c */ +/*cmd_boot.c*/ +extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); + +void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], + ulong addr, ulong * len_ptr, int verify) { + ulong len = 0, checksum; + ulong initrd_start, initrd_end; + ulong data; + /* First parameter is mapped to $r5 for kernel boot args */ + void (*theKernel) (char *); + image_header_t *hdr = &header; + char *commandline = getenv ("bootargs"); + int i; + + theKernel = (void (*)(char *))ntohl (hdr->ih_ep); + + /* Check if there is an initrd image */ + if (argc >= 3) { + SHOW_BOOT_PROGRESS (9); + + addr = simple_strtoul (argv[2], NULL, 16); + + printf ("## Loading Ramdisk Image at %08lx ...\n", addr); + + /* Copy header so we can blank CRC field for re-calculation */ + memcpy (&header, (char *)addr, sizeof (image_header_t)); + + if (ntohl (hdr->ih_magic) != IH_MAGIC) { + printf ("Bad Magic Number\n"); + SHOW_BOOT_PROGRESS (-10); + do_reset (cmdtp, flag, argc, argv); + } + + data = (ulong) & header; + len = sizeof (image_header_t); + + checksum = ntohl (hdr->ih_hcrc); + hdr->ih_hcrc = 0; + + if (crc32 (0, (char *)data, len) != checksum) { + printf ("Bad Header Checksum\n"); + SHOW_BOOT_PROGRESS (-11); + do_reset (cmdtp, flag, argc, argv); + } + + SHOW_BOOT_PROGRESS (10); + + print_image_hdr (hdr); + + data = addr + sizeof (image_header_t); + len = ntohl (hdr->ih_size); + + if (verify) { + ulong csum = 0; + + printf (" Verifying Checksum ... "); + csum = crc32 (0, (char *)data, len); + if (csum != ntohl (hdr->ih_dcrc)) { + printf ("Bad Data CRC\n"); + SHOW_BOOT_PROGRESS (-12); + do_reset (cmdtp, flag, argc, argv); + } + printf ("OK\n"); + } + + SHOW_BOOT_PROGRESS (11); + + if ((hdr->ih_os != IH_OS_LINUX) || + (hdr->ih_arch != IH_CPU_MICROBLAZE) || + (hdr->ih_type != IH_TYPE_RAMDISK)) { + printf ("No Linux Microblaze Ramdisk Image\n"); + SHOW_BOOT_PROGRESS (-13); + do_reset (cmdtp, flag, argc, argv); + } + + /* + * Now check if we have a multifile image + */ + } else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) { + ulong tail = ntohl (len_ptr[0]) % 4; + + SHOW_BOOT_PROGRESS (13); + + /* skip kernel length and terminator */ + data = (ulong) (&len_ptr[2]); + /* skip any additional image length fields */ + for (i = 1; len_ptr[i]; ++i) + data += 4; + /* add kernel length, and align */ + data += ntohl (len_ptr[0]); + if (tail) { + data += 4 - tail; + } + + len = ntohl (len_ptr[1]); + + } else { + /* + * no initrd image + */ + SHOW_BOOT_PROGRESS (14); + + data = 0; + } + +#ifdef DEBUG + if (!data) { + printf ("No initrd\n"); + } +#endif + + if (data) { + initrd_start = data; + initrd_end = initrd_start + len; + } else { + initrd_start = 0; + initrd_end = 0; + } + + SHOW_BOOT_PROGRESS (15); + +#ifdef DEBUG + printf ("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) theKernel); +#endif + + theKernel (commandline); } diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c index 12e84888b..3fa1b1126 100644 --- a/lib_microblaze/time.c +++ b/lib_microblaze/time.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK <monstr@monstr.eu> * Yasushi SHOJI <yashi@atmark-techno.com> * * See file CREDITS for list of people who contributed to this @@ -22,6 +24,11 @@ * MA 02111-1307 USA */ -void udelay(unsigned long usec) +#include <common.h> + +void udelay (unsigned long usec) { + int i; + i = get_timer (0); + while ((get_timer (0) - i) < (usec / 1000)) ; } diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c index d92f14270..fe856ffbb 100644 --- a/lib_ppc/extable.c +++ b/lib_ppc/extable.c @@ -37,6 +37,8 @@ * on our cache or tlb entries. */ +DECLARE_GLOBAL_DATA_PTR; + struct exception_table_entry { unsigned long insn, fixup; @@ -55,10 +57,22 @@ search_one_table(const struct exception_table_entry *first, long diff; mid = (last - first) / 2 + first; - diff = mid->insn - value; - if (diff == 0) - return mid->fixup; - else if (diff < 0) + if (mid > CFG_MONITOR_BASE) { + /* exception occurs in FLASH, before u-boot relocation. + * No relocation offset is needed. + */ + diff = mid->insn - value; + if (diff == 0) + return mid->fixup; + } else { + /* exception occurs in RAM, after u-boot relocation. + * A relocation offset should be added. + */ + diff = (mid->insn + gd->reloc_off) - value; + if (diff == 0) + return (mid->fixup + gd->reloc_off); + } + if (diff < 0) first = mid+1; else last = mid-1; @@ -75,8 +89,11 @@ search_exception_table(unsigned long addr) /* There is only the kernel to search. */ ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr); + /* if the serial port does not hang in exception, printf can be used */ +#if !defined(CFG_SERIAL_HANG_IN_EXCEPTION) if (ex_tab_message) printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); +#endif if (ret) return ret; return 0; diff --git a/libfdt/Makefile b/libfdt/Makefile new file mode 100644 index 000000000..dc411370f --- /dev/null +++ b/libfdt/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libfdt.a + +SOBJS = + +COBJS = fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o + + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/libfdt/README b/libfdt/README new file mode 100644 index 000000000..f4cca3499 --- /dev/null +++ b/libfdt/README @@ -0,0 +1,23 @@ +The libfdt functionality was written by David Gibson. The original +source came from the git repository: + +URL: git://ozlabs.org/home/dgibson/git/libfdt.git + +author David Gibson <dgibson@sneetch.(none)> + Fri, 23 Mar 2007 04:16:54 +0000 (15:16 +1100) +committer David Gibson <dgibson@sneetch.(none)> + Fri, 23 Mar 2007 04:16:54 +0000 (15:16 +1100) +commit 857f54e79f74429af20c2b5ecc00ee98af6a3b8b +tree 2f648f0f88225a51ded452968d28b4402df8ade0 +parent 07a12a08005f3b5cd9337900a6551e450c07b515 + +To adapt for u-boot usage, only the applicable files were copied and +imported into the u-boot git repository. +Omitted: +* GPL - u-boot comes with a copy of the GPL license +* test subdirectory - not directly useful for u-boot + +After importing, other customizations were performed. See the git log +for details. + +Jerry Van Baren diff --git a/libfdt/fdt.c b/libfdt/fdt.c new file mode 100644 index 000000000..4b1c8abf9 --- /dev/null +++ b/libfdt/fdt.c @@ -0,0 +1,85 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int _fdt_check_header(const void *fdt) +{ + if (fdt_magic(fdt) == FDT_MAGIC) { + /* Complete tree */ + if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + } else if (fdt_magic(fdt) == SW_MAGIC) { + /* Unfinished sequential-write blob */ + if (fdt_size_dt_struct(fdt) == 0) + return -FDT_ERR_BADSTATE; + } else { + return -FDT_ERR_BADMAGIC; + } + + return 0; +} + +void *fdt_offset_ptr(const void *fdt, int offset, int len) +{ + void *p; + + if (fdt_version(fdt) >= 0x11) + if (((offset + len) < offset) + || ((offset + len) > fdt_size_dt_struct(fdt))) + return NULL; + + p = _fdt_offset_ptr(fdt, offset); + + if (p + len < p) + return NULL; + return p; +} + +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) +{ + int len = strlen(s) + 1; + const char *last = strtab + tabsize - len; + const char *p; + + for (p = strtab; p <= last; p++) + if (memeq(p, s, len)) + return p; + return NULL; +} + +int fdt_move(const void *fdt, void *buf, int bufsize) +{ + int err = _fdt_check_header(fdt); + + if (err) + return err; + + if (fdt_totalsize(fdt) > bufsize) + return -FDT_ERR_NOSPACE; + + memmove(buf, fdt, fdt_totalsize(fdt)); + return 0; +} diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c new file mode 100644 index 000000000..ce01dc700 --- /dev/null +++ b/libfdt/fdt_ro.c @@ -0,0 +1,331 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +#define CHECK_HEADER(fdt) { \ + int err; \ + if ((err = _fdt_check_header(fdt)) != 0) \ + return err; \ +} + +static int offset_streq(const void *fdt, int offset, + const char *s, int len) +{ + const char *p = fdt_offset_ptr(fdt, offset, len+1); + + if (! p) + /* short match */ + return 0; + + if (memcmp(p, s, len) != 0) + return 0; + + if (p[len] != '\0') + return 0; + + return 1; +} + +/* + * Return a pointer to the string at the given string offset. + */ +char *fdt_string(const void *fdt, int stroffset) +{ + return (char *)fdt + fdt_off_dt_strings(fdt) + stroffset; +} + +/* + * Return the node offset of the node specified by: + * parentoffset - starting place (0 to start at the root) + * name - name being searched for + * namelen - length of the name: typically strlen(name) + * + * Notes: + * If the start node has subnodes, the subnodes are _not_ searched for the + * requested name. + */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen) +{ + int level = 0; + uint32_t tag; + int offset, nextoffset; + + CHECK_HEADER(fdt); + + tag = fdt_next_tag(fdt, parentoffset, &nextoffset, NULL); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset, NULL); + + switch (tag) { + case FDT_END: + return -FDT_ERR_TRUNCATED; + + case FDT_BEGIN_NODE: + level++; + /* + * If we are nested down levels, ignore the strings + * until we get back to the proper level. + */ + if (level != 1) + continue; + + /* Return the offset if this is "our" string. */ + if (offset_streq(fdt, offset+FDT_TAGSIZE, name, namelen)) + return offset; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (level >= 0); + + return -FDT_ERR_NOTFOUND; +} + +/* + * See fdt_subnode_offset_namelen() + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, + const char *name) +{ + return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); +} + +/* + * Searches for the node corresponding to the given path and returns the + * offset of that node. + */ +int fdt_path_offset(const void *fdt, const char *path) +{ + const char *end = path + strlen(path); + const char *p = path; + int offset = 0; + + CHECK_HEADER(fdt); + + /* Paths must be absolute */ + if (*path != '/') + return -FDT_ERR_BADPATH; + + while (*p) { + const char *q; + + /* Skip path separator(s) */ + while (*p == '/') + p++; + if (! *p) + return -FDT_ERR_BADPATH; + + /* + * Find the next path separator. The characters between + * p and q are the next segment of the the path to find. + */ + q = strchr(p, '/'); + if (! q) + q = end; + + /* + * Find the offset corresponding to the this path segment. + */ + offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); + + /* Oops, error, abort abort abort */ + if (offset < 0) + return offset; + + p = q; + } + + return offset; +} + +/* + * Given the offset of a node and a name of a property in that node, return + * a pointer to the property struct. + */ +struct fdt_property *fdt_get_property(const void *fdt, + int nodeoffset, + const char *name, int *lenp) +{ + int level = 0; + uint32_t tag; + struct fdt_property *prop; + int namestroff; + int offset, nextoffset; + int err; + + if ((err = _fdt_check_header(fdt)) != 0) + goto fail; + + err = -FDT_ERR_BADOFFSET; + if (nodeoffset % FDT_TAGSIZE) + goto fail; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, NULL); + if (tag != FDT_BEGIN_NODE) + goto fail; + + do { + offset = nextoffset; + + tag = fdt_next_tag(fdt, offset, &nextoffset, NULL); + switch (tag) { + case FDT_END: + err = -FDT_ERR_TRUNCATED; + goto fail; + + case FDT_BEGIN_NODE: + level++; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + /* + * If we are nested down levels, ignore the strings + * until we get back to the proper level. + */ + if (level != 0) + continue; + + err = -FDT_ERR_BADSTRUCTURE; + prop = fdt_offset_ptr_typed(fdt, offset, prop); + if (! prop) + goto fail; + namestroff = fdt32_to_cpu(prop->nameoff); + if (streq(fdt_string(fdt, namestroff), name)) { + /* Found it! */ + int len = fdt32_to_cpu(prop->len); + prop = fdt_offset_ptr(fdt, offset, + sizeof(*prop)+len); + if (! prop) + goto fail; + + if (lenp) + *lenp = len; + + return prop; + } + break; + + case FDT_NOP: + break; + + default: + err = -FDT_ERR_BADSTRUCTURE; + goto fail; + } + } while (level >= 0); + + err = -FDT_ERR_NOTFOUND; +fail: + if (lenp) + *lenp = err; + return NULL; +} + +/* + * Given the offset of a node and a name of a property in that node, return + * a pointer to the property data (ONLY). + */ +void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + const struct fdt_property *prop; + + prop = fdt_get_property(fdt, nodeoffset, name, lenp); + if (! prop) + return NULL; + + return (void *)prop->data; +} + + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset, char **namep) +{ + const uint32_t *tagp, *lenp; + uint32_t tag; + const char *p; + + if (offset % FDT_TAGSIZE) + return -1; + + tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); + if (! tagp) + return FDT_END; /* premature end */ + tag = fdt32_to_cpu(*tagp); + offset += FDT_TAGSIZE; + + switch (tag) { + case FDT_BEGIN_NODE: + if(namep) + *namep = fdt_offset_ptr(fdt, offset, 1); + + /* skip name */ + do { + p = fdt_offset_ptr(fdt, offset++, 1); + } while (p && (*p != '\0')); + if (! p) + return FDT_END; + break; + case FDT_PROP: + lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); + if (! lenp) + return FDT_END; + /* + * Get the property and set the namep to the name. + */ + if(namep) { + struct fdt_property *prop; + + prop = fdt_offset_ptr_typed(fdt, offset - FDT_TAGSIZE, prop); + if (! prop) + return -FDT_ERR_BADSTRUCTURE; + *namep = fdt_string(fdt, fdt32_to_cpu(prop->nameoff)); + } + /* skip name offset, length and value */ + offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); + break; + } + + if (nextoffset) + *nextoffset = ALIGN(offset, FDT_TAGSIZE); + + return tag; +} diff --git a/libfdt/fdt_rw.c b/libfdt/fdt_rw.c new file mode 100644 index 000000000..b33fbf45d --- /dev/null +++ b/libfdt/fdt_rw.c @@ -0,0 +1,293 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int rw_check_header(void *fdt) +{ + int err; + + if ((err = _fdt_check_header(fdt))) + return err; + if (fdt_version(fdt) < 0x11) + return -FDT_ERR_BADVERSION; + if (fdt_off_mem_rsvmap(fdt) < ALIGN(sizeof(struct fdt_header), 8)) + return -FDT_ERR_BADLAYOUT; + if (fdt_off_dt_struct(fdt) < + (fdt_off_mem_rsvmap(fdt) + sizeof(struct fdt_reserve_entry))) + return -FDT_ERR_BADLAYOUT; + if (fdt_off_dt_strings(fdt) < + (fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt))) + return -FDT_ERR_BADLAYOUT; + if (fdt_totalsize(fdt) < + (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))) + return -FDT_ERR_BADLAYOUT; + return 0; +} + +#define RW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = rw_check_header(fdt)) != 0) \ + return err; \ + } + +static inline int _blob_data_size(void *fdt) +{ + return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); +} + +static int _blob_splice(void *fdt, void *p, int oldlen, int newlen) +{ + void *end = fdt + _blob_data_size(fdt); + + if (((p + oldlen) < p) || ((p + oldlen) > end)) + return -FDT_ERR_BADOFFSET; + if ((end - oldlen + newlen) > (fdt + fdt_totalsize(fdt))) + return -FDT_ERR_NOSPACE; + memmove(p + newlen, p + oldlen, end - p - oldlen); + return 0; +} + +static int _blob_splice_struct(void *fdt, void *p, + int oldlen, int newlen) +{ + int delta = newlen - oldlen; + int err; + + if ((err = _blob_splice(fdt, p, oldlen, newlen))) + return err; + + fdt_set_header(fdt, size_dt_struct, fdt_size_dt_struct(fdt) + delta); + fdt_set_header(fdt, off_dt_strings, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _blob_splice_string(void *fdt, int newlen) +{ + void *p = fdt + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); + int err; + + if ((err = _blob_splice(fdt, p, 0, newlen))) + return err; + + fdt_set_header(fdt, size_dt_strings, fdt_size_dt_strings(fdt) + newlen); + return 0; +} + +static int _find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); + const char *p; + char *new; + int len = strlen(s) + 1; + int err; + + p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); + if (p) + /* found it */ + return (p - strtab); + + new = strtab + fdt_size_dt_strings(fdt); + err = _blob_splice_string(fdt, len); + if (err) + return err; + + memcpy(new, s, len); + return (new - strtab); +} + +static int _resize_property(void *fdt, int nodeoffset, const char *name, int len, + struct fdt_property **prop) +{ + int oldlen; + int err; + + *prop = fdt_get_property(fdt, nodeoffset, name, &oldlen); + if (! (*prop)) + return oldlen; + + if ((err = _blob_splice_struct(fdt, (*prop)->data, + ALIGN(oldlen, FDT_TAGSIZE), + ALIGN(len, FDT_TAGSIZE)))) + return err; + + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +static int _add_property(void *fdt, int nodeoffset, const char *name, int len, + struct fdt_property **prop) +{ + uint32_t tag; + int proplen; + int nextoffset; + int namestroff; + int err; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, NULL); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + + namestroff = _find_add_string(fdt, name); + if (namestroff < 0) + return namestroff; + + *prop = _fdt_offset_ptr(fdt, nextoffset); + proplen = sizeof(**prop) + ALIGN(len, FDT_TAGSIZE); + + err = _blob_splice_struct(fdt, *prop, 0, proplen); + if (err) + return err; + + (*prop)->tag = cpu_to_fdt32(FDT_PROP); + (*prop)->nameoff = cpu_to_fdt32(namestroff); + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err; + + if ((err = rw_check_header(fdt))) + return err; + + err = _resize_property(fdt, nodeoffset, name, len, &prop); + if (err == -FDT_ERR_NOTFOUND) + err = _add_property(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + + memcpy(prop->data, val, len); + return 0; +} + +int fdt_delprop(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len, proplen; + + RW_CHECK_HEADER(fdt); + + prop = fdt_get_property(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + proplen = sizeof(*prop) + ALIGN(len, FDT_TAGSIZE); + return _blob_splice_struct(fdt, prop, proplen, 0); +} + +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen) +{ + struct fdt_node_header *nh; + int offset, nextoffset; + int nodelen; + int err; + uint32_t tag; + uint32_t *endtag; + + RW_CHECK_HEADER(fdt); + + offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); + if (offset >= 0) + return -FDT_ERR_EXISTS; + else if (offset != -FDT_ERR_NOTFOUND) + return offset; + + /* Try to place the new node after the parent's properties */ + fdt_next_tag(fdt, parentoffset, &nextoffset, NULL); /* skip the BEGIN_NODE */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset, NULL); + } while (tag == FDT_PROP); + + nh = _fdt_offset_ptr(fdt, offset); + nodelen = sizeof(*nh) + ALIGN(namelen+1, FDT_TAGSIZE) + FDT_TAGSIZE; + + err = _blob_splice_struct(fdt, nh, 0, nodelen); + if (err) + return err; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memset(nh->name, 0, ALIGN(namelen+1, FDT_TAGSIZE)); + memcpy(nh->name, name, namelen); + endtag = (uint32_t *)((void *)nh + nodelen - FDT_TAGSIZE); + *endtag = cpu_to_fdt32(FDT_END_NODE); + + return offset; +} + +int fdt_add_subnode(void *fdt, int parentoffset, const char *name) +{ + return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_del_node(void *fdt, int nodeoffset) +{ + int endoffset; + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + return _blob_splice_struct(fdt, _fdt_offset_ptr(fdt, nodeoffset), + endoffset - nodeoffset, 0); +} + +int fdt_open_into(void *fdt, void *buf, int bufsize) +{ + int err; + + err = fdt_move(fdt, buf, bufsize); + if (err) + return err; + + fdt = buf; + + fdt_set_header(fdt, totalsize, bufsize); + + /* FIXME: re-order if necessary */ + + err = rw_check_header(fdt); + if (err) + return err; + + return 0; +} + +int fdt_pack(void *fdt) +{ + int err; + + err = rw_check_header(fdt); + if (err) + return err; + + /* FIXME: pack components */ + fdt_set_header(fdt, totalsize, _blob_data_size(fdt)); + return 0; +} diff --git a/libfdt/fdt_strerror.c b/libfdt/fdt_strerror.c new file mode 100644 index 000000000..7f231ce46 --- /dev/null +++ b/libfdt/fdt_strerror.c @@ -0,0 +1,64 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +struct errtabent { + const char *str; +}; + +#define ERRTABENT(val) \ + [(val)] = { .str = #val, } + +static struct errtabent errtable[] = { + ERRTABENT(FDT_ERR_NOTFOUND), + ERRTABENT(FDT_ERR_EXISTS), + ERRTABENT(FDT_ERR_NOSPACE), + + ERRTABENT(FDT_ERR_BADOFFSET), + ERRTABENT(FDT_ERR_BADPATH), + ERRTABENT(FDT_ERR_BADSTATE), + + ERRTABENT(FDT_ERR_TRUNCATED), + ERRTABENT(FDT_ERR_BADMAGIC), + ERRTABENT(FDT_ERR_BADVERSION), + ERRTABENT(FDT_ERR_BADSTRUCTURE), + ERRTABENT(FDT_ERR_BADLAYOUT), +}; +#define ERRTABSIZE (sizeof(errtable) / sizeof(errtable[0])) + +const char *fdt_strerror(int errval) +{ + if (errval > 0) + return "<valid offset/length>"; + else if (errval == 0) + return "<no error>"; + else if (errval > -ERRTABSIZE) { + const char *s = errtable[-errval].str; + + if (s) + return s; + } + + return "<unknown error>"; +} diff --git a/libfdt/fdt_sw.c b/libfdt/fdt_sw.c new file mode 100644 index 000000000..672f4ddd9 --- /dev/null +++ b/libfdt/fdt_sw.c @@ -0,0 +1,226 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int check_header_sw(void *fdt) +{ + if (fdt_magic(fdt) != SW_MAGIC) + return -FDT_ERR_BADMAGIC; + return 0; +} + +static void *grab_space(void *fdt, int len) +{ + int offset = fdt_size_dt_struct(fdt); + int spaceleft; + + spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) + - fdt_size_dt_strings(fdt); + + if ((offset + len < offset) || (offset + len > spaceleft)) + return NULL; + + fdt_set_header(fdt, size_dt_struct, offset + len); + return fdt_offset_ptr(fdt, offset, len); +} + +int fdt_create(void *buf, int bufsize) +{ + void *fdt = buf; + + if (bufsize < sizeof(struct fdt_header)) + return -FDT_ERR_NOSPACE; + + memset(buf, 0, bufsize); + + fdt_set_header(fdt, magic, SW_MAGIC); + fdt_set_header(fdt, version, FDT_LAST_SUPPORTED_VERSION); + fdt_set_header(fdt, last_comp_version, FDT_FIRST_SUPPORTED_VERSION); + fdt_set_header(fdt, totalsize, bufsize); + + fdt_set_header(fdt, off_mem_rsvmap, ALIGN(sizeof(struct fdt_header), + sizeof(struct fdt_reserve_entry))); + fdt_set_header(fdt, off_dt_struct, fdt_off_mem_rsvmap(fdt)); + fdt_set_header(fdt, off_dt_strings, bufsize); + + return 0; +} + +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) +{ + struct fdt_reserve_entry *re; + int err = check_header_sw(fdt); + int offset; + + if (err) + return err; + if (fdt_size_dt_struct(fdt)) + return -FDT_ERR_BADSTATE; + + offset = fdt_off_dt_struct(fdt); + if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) + return -FDT_ERR_NOSPACE; + + re = (struct fdt_reserve_entry *)((void *)fdt + offset); + re->address = cpu_to_fdt64(addr); + re->size = cpu_to_fdt64(size); + + fdt_set_header(fdt, off_dt_struct, offset + sizeof(*re)); + + return 0; +} + +int fdt_finish_reservemap(void *fdt) +{ + return fdt_add_reservemap_entry(fdt, 0, 0); +} + +int fdt_begin_node(void *fdt, const char *name) +{ + struct fdt_node_header *nh; + int err = check_header_sw(fdt); + int namelen = strlen(name) + 1; + + if (err) + return err; + + nh = grab_space(fdt, sizeof(*nh) + ALIGN(namelen, FDT_TAGSIZE)); + if (! nh) + return -FDT_ERR_NOSPACE; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memcpy(nh->name, name, namelen); + return 0; +} + +int fdt_end_node(void *fdt) +{ + uint32_t *en; + int err = check_header_sw(fdt); + + if (err) + return err; + + en = grab_space(fdt, FDT_TAGSIZE); + if (! en) + return -FDT_ERR_NOSPACE; + + *en = cpu_to_fdt32(FDT_END_NODE); + return 0; +} + +static int find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_totalsize(fdt); + const char *p; + int strtabsize = fdt_size_dt_strings(fdt); + int len = strlen(s) + 1; + int struct_top, offset; + + p = _fdt_find_string(strtab - strtabsize, strtabsize, s); + if (p) + return p - strtab; + + /* Add it */ + offset = -strtabsize - len; + struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + if (fdt_totalsize(fdt) + offset < struct_top) + return 0; /* no more room :( */ + + memcpy(strtab + offset, s, len); + fdt_set_header(fdt, size_dt_strings, strtabsize + len); + return offset; +} + +int fdt_property(void *fdt, const char *name, const void *val, int len) +{ + struct fdt_property *prop; + int err = check_header_sw(fdt); + int nameoff; + + if (err) + return err; + + nameoff = find_add_string(fdt, name); + if (nameoff == 0) + return -FDT_ERR_NOSPACE; + + prop = grab_space(fdt, sizeof(*prop) + ALIGN(len, FDT_TAGSIZE)); + if (! prop) + return -FDT_ERR_NOSPACE; + + prop->tag = cpu_to_fdt32(FDT_PROP); + prop->nameoff = cpu_to_fdt32(nameoff); + prop->len = cpu_to_fdt32(len); + memcpy(prop->data, val, len); + return 0; +} + +int fdt_finish(void *fdt) +{ + int err = check_header_sw(fdt); + char *p = (char *)fdt; + uint32_t *end; + int oldstroffset, newstroffset; + uint32_t tag; + int offset, nextoffset; + + if (err) + return err; + + /* Add terminator */ + end = grab_space(fdt, sizeof(*end)); + if (! end) + return -FDT_ERR_NOSPACE; + *end = cpu_to_fdt32(FDT_END); + + /* Relocate the string table */ + oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); + newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); + fdt_set_header(fdt, off_dt_strings, newstroffset); + + /* Walk the structure, correcting string offsets */ + offset = 0; + while ((tag = fdt_next_tag(fdt, offset, &nextoffset, NULL)) != FDT_END) { + if (tag == FDT_PROP) { + struct fdt_property *prop = fdt_offset_ptr(fdt, offset, + sizeof(*prop)); + int nameoff; + + if (! prop) + return -FDT_ERR_BADSTRUCTURE; + + nameoff = fdt32_to_cpu(prop->nameoff); + nameoff += fdt_size_dt_strings(fdt); + prop->nameoff = cpu_to_fdt32(nameoff); + } + offset = nextoffset; + } + + /* Finally, adjust the header */ + fdt_set_header(fdt, totalsize, newstroffset + fdt_size_dt_strings(fdt)); + fdt_set_header(fdt, magic, FDT_MAGIC); + return 0; +} diff --git a/libfdt/fdt_wip.c b/libfdt/fdt_wip.c new file mode 100644 index 000000000..261b9b0dc --- /dev/null +++ b/libfdt/fdt_wip.c @@ -0,0 +1,112 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + void *propval; + int proplen; + + propval = fdt_getprop(fdt, nodeoffset, name, &proplen); + if (! propval) + return proplen; + + if (proplen != len) + return -FDT_ERR_NOSPACE; + + memcpy(propval, val, len); + return 0; +} + +static void nop_region(void *start, int len) +{ + uint32_t *p; + + for (p = start; (void *)p < (start + len); p++) + *p = cpu_to_fdt32(FDT_NOP); +} + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len; + + prop = fdt_get_property(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + nop_region(prop, len + sizeof(*prop)); + + return 0; +} + +int _fdt_node_end_offset(void *fdt, int nodeoffset) +{ + int level = 0; + uint32_t tag; + int offset, nextoffset; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, NULL); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset, NULL); + + switch (tag) { + case FDT_END: + return offset; + + case FDT_BEGIN_NODE: + level++; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (level >= 0); + + return nextoffset; +} + +int fdt_nop_node(void *fdt, int nodeoffset) +{ + int endoffset; + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + nop_region(fdt_offset_ptr(fdt, nodeoffset, 0), endoffset - nodeoffset); + return 0; +} diff --git a/libfdt/libfdt_internal.h b/libfdt/libfdt_internal.h new file mode 100644 index 000000000..cc9633c9e --- /dev/null +++ b/libfdt/libfdt_internal.h @@ -0,0 +1,40 @@ +#ifndef _LIBFDT_INTERNAL_H +#define _LIBFDT_INTERNAL_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <fdt.h> + +#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define PALIGN(p, a) ((void *)ALIGN((unsigned long)(p), (a))) + +#define memeq(p, q, n) (memcmp((p), (q), (n)) == 0) +#define streq(p, q) (strcmp((p), (q)) == 0) + +int _fdt_check_header(const void *fdt); +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); +int _fdt_node_end_offset(void *fdt, int nodeoffset); + +static inline void *_fdt_offset_ptr(const struct fdt_header *fdt, int offset) +{ + return (void *)fdt + fdt_off_dt_struct(fdt) + offset; +} + +#define SW_MAGIC (~FDT_MAGIC) + +#endif /* _LIBFDT_INTERNAL_H */ diff --git a/microblaze_config.mk b/microblaze_config.mk index b3ac8e08c..06ddefa4c 100644 --- a/microblaze_config.mk +++ b/microblaze_config.mk @@ -22,7 +22,7 @@ # MA 02111-1307 USA # -PLATFORM_CPPFLAGS += -ffixed-r31 +PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ ifdef CONFIG_MICROBLAZE_HARD_MULT PLATFORM_CPPFLAGS += -mno-xl-soft-mul @@ -52,9 +52,12 @@ extern int rtl8139_initialize(bd_t*); extern int rtl8169_initialize(bd_t*); extern int scc_initialize(bd_t*); extern int skge_initialize(bd_t*); +extern int tsi108_eth_initialize(bd_t*); extern int tsec_initialize(bd_t*, int, char *); extern int npe_initialize(bd_t *); extern int uec_initialize(int); +extern int bfin_EMAC_initialize(bd_t *); +extern int atstk1000_eth_initialize(bd_t *); static struct eth_device *eth_devices, *eth_current; @@ -249,12 +252,21 @@ int eth_initialize(bd_t *bis) #ifdef CONFIG_NS8382X ns8382x_initialize(bis); #endif +#if defined(CONFIG_TSI108_ETH) + tsi108_eth_initialize(bis); +#endif #if defined(CONFIG_RTL8139) rtl8139_initialize(bis); #endif #if defined(CONFIG_RTL8169) rtl8169_initialize(bis); #endif +#if defined(CONFIG_BF537) + bfin_EMAC_initialize(bis); +#endif +#if defined(CONFIG_ATSTK1000) + atstk1000_eth_initialize(bis); +#endif if (!eth_devices) { puts ("No ethernet found.\n"); @@ -1424,6 +1424,26 @@ NetReceive(volatile uchar * inpkt, int len) /* XXX point to ip packet */ (*packetHandler)((uchar *)ip, 0, 0, 0); return; + case ICMP_ECHO_REQUEST: +#ifdef ET_DEBUG + printf ("Got ICMP ECHO REQUEST, return %d bytes \n", + ETHER_HDR_SIZE + len); +#endif + memcpy (&et->et_dest[0], &et->et_src[0], 6); + memcpy (&et->et_src[ 0], NetOurEther, 6); + + ip->ip_sum = 0; + ip->ip_off = 0; + NetCopyIP((void*)&ip->ip_dst, &ip->ip_src); + NetCopyIP((void*)&ip->ip_src, &NetOurIP); + ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE_NO_UDP >> 1); + + icmph->type = ICMP_ECHO_REPLY; + icmph->checksum = 0; + icmph->checksum = ~NetCksum((uchar *)icmph, + (len - IP_HDR_SIZE_NO_UDP) >> 1); + (void) eth_send((uchar *)et, ETHER_HDR_SIZE + len); + return; #endif default: return; |