diff options
Diffstat (limited to 'board/esd/cpci405/cpci405.c')
-rw-r--r-- | board/esd/cpci405/cpci405.c | 68 |
1 files changed, 24 insertions, 44 deletions
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 2ed0fc272..69cb8cef5 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; -extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/ +extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/ #if 0 #define FPGA_DEBUG #endif @@ -54,8 +54,6 @@ const unsigned char fpgadata[] = * include common fpga code (for esd boards) */ #include "../common/fpga.c" - - #include "../common/auto_update.h" #ifdef CONFIG_CPCI405AB @@ -88,13 +86,11 @@ au_image_t au_image[] = { int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); - /* Prototypes */ int cpci405_version(void); int gunzip(void *, int, unsigned char *, unsigned long *); void lxt971_no_sleep(void); - int board_early_init_f (void) { #ifndef CONFIG_CPCI405_VER2 @@ -113,10 +109,10 @@ int board_early_init_f (void) /* * First pull fpga-prg pin low, to disable fpga logic (on version 2 board) */ - out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */ + out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ + out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */ out32(GPIO0_OR, CFG_FPGA_PRG); /* set output pins to high */ - out32(GPIO0_OR, 0); /* pull prg low */ + out32(GPIO0_OR, 0); /* pull prg low */ /* * Boot onboard FPGA @@ -178,51 +174,48 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ #ifdef CONFIG_CPCI405_6U if (cpci405_version() == 3) { - mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ + mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ } else { - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ } #else - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ #endif - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ return 0; } - /* ------------------------------------------------------------------------- */ int ctermm2(void) { #ifdef CONFIG_CPCI405_VER2 - return 0; /* no, board is cpci405 */ + return 0; /* no, board is cpci405 */ #else if ((*(unsigned char *)0xf0000400 == 0x00) && (*(unsigned char *)0xf0000401 == 0x01)) - return 0; /* no, board is cpci405 */ + return 0; /* no, board is cpci405 */ else - return -1; /* yes, board is cterm-m2 */ + return -1; /* yes, board is cterm-m2 */ #endif } - int cpci405_host(void) { if (mfdcr(strap) & PSR_PCI_ARBIT_EN) - return -1; /* yes, board is cpci405 host */ + return -1; /* yes, board is cpci405 host */ else - return 0; /* no, board is cpci405 adapter */ + return 0; /* no, board is cpci405 adapter */ } - int cpci405_version(void) { unsigned long cntrl0Reg; @@ -235,8 +228,8 @@ int cpci405_version(void) mtdcr(cntrl0, cntrl0Reg | 0x03000000); out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000); out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000); - udelay(1000); /* wait some time before reading input */ - value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */ + udelay(1000); /* wait some time before reading input */ + value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */ /* * Restore GPIO settings @@ -262,13 +255,11 @@ int cpci405_version(void) } } - int misc_init_f (void) { return 0; /* dummy implementation */ } - int misc_init_r (void) { unsigned long cntrl0Reg; @@ -432,7 +423,6 @@ int misc_init_r (void) return (0); } - /* * Check Board Identity: */ @@ -488,7 +478,7 @@ int checkboard (void) } #ifndef CONFIG_CPCI405_VER2 - puts ("\nFPGA: "); + puts ("\nFPGA: "); /* display infos on fpgaimage */ index = 15; @@ -515,7 +505,6 @@ long int initdram (int board_type) return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP @@ -527,7 +516,6 @@ void reset_phy(void) #endif } - /* ------------------------------------------------------------------------- */ #ifdef CONFIG_CPCI405_VER2 @@ -550,7 +538,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ #endif /* CONFIG_CPCI405_VER2 */ - #if defined(CONFIG_PCI) void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { @@ -585,14 +572,13 @@ int pci_pre_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) */ - #ifdef CONFIG_CPCI405AB -#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ +#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ |= CFG_FPGA_MODE_1WIRE_DIR) -#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ +#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ &= ~CFG_FPGA_MODE_1WIRE_DIR) -#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \ +#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \ & CFG_FPGA_MODE_1WIRE) /* @@ -615,7 +601,6 @@ int OWTouchReset(void) return result; } - /* * Send 1 a 1-wire write bit. * Provide 10us recovery time. @@ -641,7 +626,6 @@ void OWWriteBit(int bit) } } - /* * Read a bit from the 1-wire bus and return it. * Provide 10us recovery time. @@ -661,7 +645,6 @@ int OWReadBit(void) return result; } - void OWWriteByte(int data) { int loop; @@ -672,7 +655,6 @@ void OWWriteByte(int data) } } - int OWReadByte(void) { int loop, result = 0; @@ -687,7 +669,6 @@ int OWReadByte(void) return result; } - int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { volatile unsigned short val; @@ -728,7 +709,6 @@ U_BOOT_CMD( NULL ); - #define CFG_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT28WC32 */ #define CFG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars*/ |