diff options
Diffstat (limited to 'board/korat/korat.c')
| -rw-r--r-- | board/korat/korat.c | 761 |
1 files changed, 761 insertions, 0 deletions
diff --git a/board/korat/korat.c b/board/korat/korat.c new file mode 100644 index 000000000..7cb9ee11f --- /dev/null +++ b/board/korat/korat.c @@ -0,0 +1,761 @@ +/* + * (C) Copyright 2007 + * Larry Johnson, lrj@acm.org + * + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm-ppc/io.h> +#include <i2c.h> +#include <ppc440.h> + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +ulong flash_get_size(ulong base, int banknum); + +int board_early_init_f(void) +{ + u32 sdr0_pfc1, sdr0_pfc2; + u32 gpio0_ir; + u32 reg; + int eth; + + mtdcr(ebccfga, xbcfg); + mtdcr(ebccfgd, 0xb8400000); + + /*-------------------------------------------------------------------- + * Setup the GPIO pins + * + * Korat GPIO usage: + * + * Init. + * Pin Source I/O value Function + * ------ ------ --- ----- --------------------------------- + * GPIO00 Alt1 I/O x PerAddr07 + * GPIO01 Alt1 I/O x PerAddr06 + * GPIO02 Alt1 I/O x PerAddr05 + * GPIO03 GPIO x x GPIO03 to expansion bus connector + * GPIO04 GPIO x x GPIO04 to expansion bus connector + * GPIO05 GPIO x x GPIO05 to expansion bus connector + * GPIO06 Alt1 O x PerCS1 (2nd NOR flash) + * GPIO07 Alt1 O x PerCS2 (CPLD) + * GPIO08 Alt1 O x PerCS3 to expansion bus connector + * GPIO09 Alt1 O x PerCS4 to expansion bus connector + * GPIO10 Alt1 O x PerCS5 to expansion bus connector + * GPIO11 Alt1 I x PerErr + * GPIO12 GPIO O 0 ATMega !Reset + * GPIO13 GPIO O 1 SPI Atmega !SS + * GPIO14 GPIO O 1 Write protect EEPROM #1 (0xA8) + * GPIO15 GPIO O 0 CPU Run LED !On + * GPIO16 Alt1 O x GMC1TxD0 + * GPIO17 Alt1 O x GMC1TxD1 + * GPIO18 Alt1 O x GMC1TxD2 + * GPIO19 Alt1 O x GMC1TxD3 + * GPIO20 Alt1 O x RejectPkt0 + * GPIO21 Alt1 O x RejectPkt1 + * GPIO22 GPIO I x PGOOD_DDR + * GPIO23 Alt1 O x SCPD0 + * GPIO24 Alt1 O x GMC0TxD2 + * GPIO25 Alt1 O x GMC0TxD3 + * GPIO26 GPIO? I/O x IIC0SDA (selected in SDR0_PFC4) + * GPIO27 GPIO O 0 PHY #0 1000BASE-X + * GPIO28 GPIO O 0 PHY #1 1000BASE-X + * GPIO29 GPIO I x Test jumper !Present + * GPIO30 GPIO I x SFP module #0 !Present + * GPIO31 GPIO I x SFP module #1 !Present + * + * GPIO32 GPIO O 1 SFP module #0 Tx !Enable + * GPIO33 GPIO O 1 SFP module #1 Tx !Enable + * GPIO34 Alt2 I x !UART1_CTS + * GPIO35 Alt2 O x !UART1_RTS + * GPIO36 Alt1 I x !UART0_CTS + * GPIO37 Alt1 O x !UART0_RTS + * GPIO38 Alt2 O x UART1_Tx + * GPIO39 Alt2 I x UART1_Rx + * GPIO40 Alt1 I x IRQ0 (Ethernet 0) + * GPIO41 Alt1 I x IRQ1 (Ethernet 1) + * GPIO42 Alt1 I x IRQ2 (PCI interrupt) + * GPIO43 Alt1 I x IRQ3 (System Alert from CPLD) + * GPIO44 xxxx x x (grounded through pulldown) + * GPIO45 GPIO O 0 PHY #0 Enable + * GPIO46 GPIO O 0 PHY #1 Enable + * GPIO47 GPIO I x Reset switch !Pressed + * GPIO48 GPIO I x Shutdown switch !Pressed + * GPIO49 xxxx x x (reserved for trace port) + * . . . . . + * . . . . . + * . . . . . + * GPIO63 xxxx x x (reserved for trace port) + *-------------------------------------------------------------------*/ + + out_be32((u32 *) GPIO0_OR, 0x00060000); + out_be32((u32 *) GPIO1_OR, 0xC0000000); + + out_be32((u32 *) GPIO0_OSRL, 0x54055400); + out_be32((u32 *) GPIO0_OSRH, 0x55015000); + out_be32((u32 *) GPIO1_OSRL, 0x02180000); + out_be32((u32 *) GPIO1_OSRH, 0x00000000); + + out_be32((u32 *) GPIO0_TSRL, 0x54055500); + out_be32((u32 *) GPIO0_TSRH, 0x00015000); + out_be32((u32 *) GPIO1_TSRL, 0x00000000); + out_be32((u32 *) GPIO1_TSRH, 0x00000000); + + out_be32((u32 *) GPIO0_TCR, 0x000FF0D8); + out_be32((u32 *) GPIO1_TCR, 0xD6060000); + + out_be32((u32 *) GPIO0_ISR1L, 0x54000100); + out_be32((u32 *) GPIO0_ISR1H, 0x00500000); + out_be32((u32 *) GPIO1_ISR1L, 0x00405500); + out_be32((u32 *) GPIO1_ISR1H, 0x00000000); + + out_be32((u32 *) GPIO0_ISR2L, 0x00000000); + out_be32((u32 *) GPIO0_ISR2H, 0x00000000); + out_be32((u32 *) GPIO1_ISR2L, 0x04010000); + out_be32((u32 *) GPIO1_ISR2H, 0x00000000); + + out_be32((u32 *) GPIO0_ISR3L, 0x00000000); + out_be32((u32 *) GPIO0_ISR3H, 0x00000000); + out_be32((u32 *) GPIO1_ISR3L, 0x00000000); + out_be32((u32 *) GPIO1_ISR3H, 0x00000000); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(uic0er, 0x00000000); /* disable all */ + mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ + mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + + mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(uic1er, 0x00000000); /* disable all */ + mtdcr(uic1cr, 0x00000000); /* all non-critical */ + mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ + mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + + mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(uic2er, 0x00000000); /* disable all */ + mtdcr(uic2cr, 0x00000000); /* all non-critical */ + mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic2sr, 0xffffffff); /* clear all */ + + /* take sim card reader and CF controller out of reset */ + out_8((u8 *) CFG_CPLD_BASE + 0x04, 0x80); + + /* Configure the two Ethernet PHYs. For each PHY, configure for fiber + * if the SFP module is present, and for copper if it is not present. + */ + gpio0_ir = in_be32((u32 *) GPIO0_IR); + for (eth = 0; eth < 2; ++eth) { + if (gpio0_ir & (0x00000001 << (1 - eth))) { + /* SFP module not present: configure PHY for copper. */ + /* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */ + out_8((u8 *) CFG_CPLD_BASE + 0x06, + in_8((u8 *) CFG_CPLD_BASE + 0x06) | + 0x06 << (4 * eth)); + } else { + /* SFP module present: configure PHY for fiber and + enable output */ + out_be32((u32 *) GPIO0_OR, in_be32((u32 *) GPIO0_OR) | + (0x00000001 << (4 - eth))); + out_be32((u32 *) GPIO1_OR, in_be32((u32 *) GPIO1_OR) & + ~(0x00000001 << (31 - eth))); + } + } + /* enable Ethernet: set GPIO45 and GPIO46 to 1 */ + out_be32((u32 *) GPIO1_OR, in_be32((u32 *) GPIO1_OR) | 0x00060000); + + /* select Ethernet pins */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_4; + mfsdr(SDR0_PFC2, sdr0_pfc2); + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_4; + mtsdr(SDR0_PFC2, sdr0_pfc2); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + /* PCI arbiter enabled */ + mfsdr(sdr_pci0, reg); + mtsdr(sdr_pci0, 0x80000000 | reg); + + return 0; +} + +static int man_data_read(unsigned int addr) +{ + /* + * Read an octet of data from address "addr" in the manufacturer's + * information serial EEPROM, or -1 on error. + */ + u8 data[2]; + + if (0 != i2c_probe(MAN_DATA_EEPROM_ADDR) || + 0 != i2c_read(MAN_DATA_EEPROM_ADDR, addr, 1, data, 1)) { + debug("man_data_read(0x%02X) failed\n", addr); + return -1; + } + debug("man_info_read(0x%02X) returned 0x%02X\n", addr, data[0]); + return data[0]; +} + +static unsigned int man_data_field_addr(unsigned int const field) +{ + /* + * The manufacturer's information serial EEPROM contains a sequence of + * zero-delimited fields. Return the starting address of field "field", + * or 0 on error. + */ + unsigned addr, i; + + if (0 == field || 'A' != man_data_read(0) || '\0' != man_data_read(1)) + /* Only format "A" is currently supported */ + return 0; + + for (addr = 2, i = 1; i < field && addr < 256; ++addr) { + if ('\0' == man_data_read(addr)) + ++i; + } + return (addr < 256) ? addr : 0; +} + +static char *man_data_read_field(char s[], unsigned const field, + unsigned const length) +{ + /* + * Place the null-terminated contents of field "field" of length + * "length" from the manufacturer's information serial EEPROM into + * string "s[length + 1]" and return a pointer to s, or return 0 on + * error. In either case the original contents of s[] is not preserved. + */ + unsigned addr, i; + + addr = man_data_field_addr(field); + if (0 == addr || addr + length >= 255) + return 0; + + for (i = 0; i < length; ++i) { + int const c = man_data_read(addr++); + + if (c <= 0) + return 0; + + s[i] = (char)c; + } + if (0 != man_data_read(addr)) + return 0; + + s[i] = '\0'; + return s; +} + +static void set_serial_number(void) +{ + /* + * If the environmental variable "serial#" is not set, try to set it + * from the manufacturer's information serial EEPROM. + */ + char s[MAN_SERIAL_NO_LENGTH + 1]; + + if (0 == getenv("serial#") && + 0 != man_data_read_field(s, MAN_SERIAL_NO_FIELD, + MAN_SERIAL_NO_LENGTH)) + setenv("serial#", s); +} + +static void set_mac_addresses(void) +{ + /* + * If the environmental variables "ethaddr" and/or "eth1addr" are not + * set, try to set them from the manufacturer's information serial + * EEPROM. + */ + char s[MAN_MAC_ADDR_LENGTH + 1]; + + if (0 != getenv("ethaddr") && 0 != getenv("eth1addr")) + return; + + if (0 == man_data_read_field(s, MAN_MAC_ADDR_FIELD, + MAN_MAC_ADDR_LENGTH)) + return; + + if (0 == getenv("ethaddr")) + setenv("ethaddr", s); + + if (0 == getenv("eth1addr")) { + ++s[MAN_MAC_ADDR_LENGTH - 1]; + setenv("eth1addr", s); + } +} + +/*---------------------------------------------------------------------------+ + | misc_init_r. + +---------------------------------------------------------------------------*/ +int misc_init_r(void) +{ + uint pbcr; + int size_val = 0; + u32 reg; + unsigned long usb2d0cr = 0; + unsigned long usb2phy0cr, usb2h0cr = 0; + unsigned long sdr0_pfc1; + char *act = getenv("usbact"); + + /* + * FLASH stuff... + */ + + /* Re-do sizing to get full correct info */ + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + + mtdcr(ebccfga, pb0cr); + pbcr = mfdcr(ebccfgd); + switch (gd->bd->bi_flashsize) { + case 1 << 20: + size_val = 0; + break; + case 2 << 20: + size_val = 1; + break; + case 4 << 20: + size_val = 2; + break; + case 8 << 20: + size_val = 3; + break; + case 16 << 20: + size_val = 4; + break; + case 32 << 20: + size_val = 5; + break; + case 64 << 20: + size_val = 6; + break; + case 128 << 20: + size_val = 7; + break; + } + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtdcr(ebccfga, pb0cr); + mtdcr(ebccfgd, pbcr); + + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff, + &flash_info[0]); + + /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + + /* + * USB suff... + */ + if (act == NULL || strcmp(act, "hostdev") == 0) { + /* SDR Setting */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_USB2D0CR, usb2d0cr); + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1 */ + + /* An 8-bit/60MHz interface is the only possible alternative + when connecting the Device to the PHY */ + usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1 */ + + /* To enable the USB 2.0 Device function through the UTMI interface */ + usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; + usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1 */ + + sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK; + sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0 */ + + mtsdr(SDR0_PFC1, sdr0_pfc1); + mtsdr(SDR0_USB2D0CR, usb2d0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB2H0CR, usb2h0cr); + + /*clear resets */ + udelay(1000); + mtsdr(SDR0_SRST1, 0x00000000); + udelay(1000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Host(int phy) Device(ext phy)\n"); + + } else if (strcmp(act, "dev") == 0) { + /*-------------------PATCH-------------------------------*/ + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1 */ + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + + udelay(1000); + mtsdr(SDR0_SRST1, 0x672c6000); + + udelay(1000); + mtsdr(SDR0_SRST0, 0x00000080); + + udelay(1000); + mtsdr(SDR0_SRST1, 0x60206000); + + *(unsigned int *)(0xe0000350) = 0x00000001; + + udelay(1000); + mtsdr(SDR0_SRST1, 0x60306000); + /*-------------------PATCH-------------------------------*/ + + /* SDR Setting */ + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + mfsdr(SDR0_USB2D0CR, usb2d0cr); + mfsdr(SDR0_PFC1, sdr0_pfc1); + + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0 */ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0 */ + + usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0 */ + + usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; + usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0 */ + + sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK; + sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1 */ + + mtsdr(SDR0_USB2H0CR, usb2h0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB2D0CR, usb2d0cr); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + /*clear resets */ + udelay(1000); + mtsdr(SDR0_SRST1, 0x00000000); + udelay(1000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Device(int phy)\n"); + } + + mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */ + reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0); + mtsdr(SDR0_SRST1, reg); + + /* + * Clear PLB4A0_ACR[WRP] + * This fix will make the MAL burst disabling patch for the Linux + * EMAC driver obsolete. + */ + reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; + mtdcr(plb4_acr, reg); + + set_serial_number(); + set_mac_addresses(); + return 0; +} + +int checkboard(void) +{ + char const *const s = getenv("serial#"); + u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0); + u32 const gpio0_or = in_be32((u32 *) GPIO0_OR); + + printf("Board: Korat, Rev. %X", rev); + if (s != NULL) + printf(", serial# %s", s); + + printf(", Ethernet PHY 0: "); + if (gpio0_or & 0x00000010) + printf("fiber"); + else + printf("copper"); + + printf(", PHY 1: "); + if (gpio0_or & 0x00000008) + printf("fiber"); + else + printf("copper"); + + printf(".\n"); + return (0); +} + +#if defined(CFG_DRAM_TEST) +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + + mtmsr(0); + + /* TODO: find correct size of SDRAM */ + for (k = 0; k < CFG_MBYTES_SDRAM; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) + printf("%3d MB\r", k / 1024); + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + return 0; +} +#endif /* defined(CFG_DRAM_TEST) */ + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int pci_pre_init(struct pci_controller *hose) +{ + unsigned long addr; + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB3 devices to 0. + | Set PLB3 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp1, addr); + mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb3_acr); + mtdcr(plb3_acr, addr | 0x80000000); + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB4 devices to 0. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp0, addr); + mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ + mtdcr(plb4_acr, addr); + + /*-------------------------------------------------------------------------+ + | Set Nebula PLB4 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + /* Segment0 */ + addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; + addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; + addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; + addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; + mtdcr(plb0_acr, addr); + + /* Segment1 */ + addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; + addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; + addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; + addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; + mtdcr(plb1_acr, addr); + + return 1; +} +#endif /* defined(CONFIG_PCI) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller *hose) +{ + /*--------------------------------------------------------------------------+ + * Set up Direct MMIO registers + *--------------------------------------------------------------------------*/ + /*--------------------------------------------------------------------------+ + | PowerPC440EPX PCI Master configuration. + | Map one 1Gig range of PLB/processor addresses to PCI memory space. + | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF + | Use byte reversed out routines to handle endianess. + | Make this region non-prefetchable. + +--------------------------------------------------------------------------*/ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + + /*--------------------------------------------------------------------------+ + * Set up Configuration registers + *--------------------------------------------------------------------------*/ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + CFG_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); + + /*--------------------------------------------------------------------------+ + * Set up Configuration registers for on-board NEC uPD720101 USB controller + *--------------------------------------------------------------------------*/ + pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * pci_master_init + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +void pci_master_init(struct pci_controller *hose) +{ + unsigned short temp_short; + + /*--------------------------------------------------------------------------+ + | Write the PowerPC440 EP PCI Configuration regs. + | Enable PowerPC440 EP to be a master on the PCI bus (PMM). + | Enable PowerPC440 EP to act as a PCI memory target (PTM). + +--------------------------------------------------------------------------*/ + pci_read_config_word(0, PCI_COMMAND, &temp_short); + pci_write_config_word(0, PCI_COMMAND, + temp_short | PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY); +} +#endif + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* Korat is always configured as host. */ + return (1); +} +#endif + +#if defined(CONFIG_POST) +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +#endif |