diff options
Diffstat (limited to 'include')
-rwxr-xr-x | include/asm-microblaze/asm.h | 98 | ||||
-rw-r--r-- | include/asm-microblaze/microblaze_intc.h | 3 | ||||
-rw-r--r-- | include/asm-ppc/e300.h | 16 | ||||
-rw-r--r-- | include/asm-ppc/global_data.h | 6 | ||||
-rw-r--r-- | include/asm-ppc/immap_83xx.h | 56 | ||||
-rw-r--r-- | include/cmd_confdefs.h | 2 | ||||
-rw-r--r-- | include/common.h | 6 | ||||
-rw-r--r-- | include/configs/MPC8313ERDB.h | 561 | ||||
-rw-r--r-- | include/configs/MPC8349ITX.h | 3 | ||||
-rw-r--r-- | include/configs/ml401.h | 61 | ||||
-rw-r--r-- | include/configs/xupv2p.h | 14 | ||||
-rw-r--r-- | include/linux/stat.h | 3 | ||||
-rw-r--r-- | include/mpc83xx.h | 257 |
13 files changed, 1045 insertions, 41 deletions
diff --git a/include/asm-microblaze/asm.h b/include/asm-microblaze/asm.h new file mode 100755 index 000000000..f10f89c94 --- /dev/null +++ b/include/asm-microblaze/asm.h @@ -0,0 +1,98 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* FSL macros */ +#define NGET(val, fslnum) \ + __asm__ __volatile__ ("nget %0, rfsl" #fslnum :"=r" (val)); + +#define GET(val, fslnum) \ + __asm__ __volatile__ ("get %0, rfsl" #fslnum :"=r" (val)); + +#define NCGET(val, fslnum) \ + __asm__ __volatile__ ("ncget %0, rfsl" #fslnum :"=r" (val)); + +#define CGET(val, fslnum) \ + __asm__ __volatile__ ("cget %0, rfsl" #fslnum :"=r" (val)); + +#define NPUT(val, fslnum) \ + __asm__ __volatile__ ("nput %0, rfsl" #fslnum ::"r" (val)); + +#define PUT(val, fslnum) \ + __asm__ __volatile__ ("put %0, rfsl" #fslnum ::"r" (val)); + +#define NCPUT(val, fslnum) \ + __asm__ __volatile__ ("ncput %0, rfsl" #fslnum ::"r" (val)); + +#define CPUT(val, fslnum) \ + __asm__ __volatile__ ("cput %0, rfsl" #fslnum ::"r" (val)); + +/* CPU dependent */ +/* machine status register */ +#define MFS(val, reg) \ + __asm__ __volatile__ ("mfs %0," #reg :"=r" (val)); + +#define MTS(val, reg) \ + __asm__ __volatile__ ("mts " #reg ", %0"::"r" (val)); + +/* get return address from interrupt */ +#define R14(val) \ + __asm__ __volatile__ ("addi %0, r14, 0":"=r" (val)); + +#define NOP __asm__ __volatile__ ("nop"); + +/* use machine status registe USE_MSR_REG */ +#ifdef XILINX_USE_MSR_INSTR +#define MSRSET(val) \ + __asm__ __volatile__ ("msrset r0," #val ); + +#define MSRCLR(val) \ + __asm__ __volatile__ ("msrclr r0," #val ); + +#else +#define MSRSET(val) \ +{ \ + register unsigned tmp; \ + __asm__ __volatile__ (" \ + mfs %0, rmsr; \ + ori %0, %0, "#val"; \ + mts rmsr, %0; \ + nop;" \ + : "=r" (tmp) \ + : "d" (val) \ + : "memory"); \ +} + +#define MSRCLR(val) \ +{ \ + register unsigned tmp; \ + __asm__ __volatile__ (" \ + mfs %0, rmsr; \ + andi %0, %0, ~"#val"; \ + mts rmsr, %0; \ + nop;" \ + : "=r" (tmp) \ + : "d" (val) \ + : "memory"); \ +} +#endif diff --git a/include/asm-microblaze/microblaze_intc.h b/include/asm-microblaze/microblaze_intc.h index 6635aeacb..4c385aa24 100644 --- a/include/asm-microblaze/microblaze_intc.h +++ b/include/asm-microblaze/microblaze_intc.h @@ -38,3 +38,6 @@ struct irq_action { void *arg; int count; /* number of interrupt */ }; + +void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, + void *arg); diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h index ff9512f20..d1bb159ae 100644 --- a/include/asm-ppc/e300.h +++ b/include/asm-ppc/e300.h @@ -6,19 +6,9 @@ #ifndef __E300_H__ #define __E300_H__ -/* - * e300 Processor Version & Revision Numbers - */ -#define PVR_83xx 0x80830000 -#define PVR_8349_REV10 (PVR_83xx | 0x0010) -#define PVR_8349_REV11 (PVR_83xx | 0x0011) -#define PVR_8360_REV10 (PVR_83xx | 0x0020) -#define PVR_8360_REV11 (PVR_83xx | 0x0020) - -#if defined(CONFIG_MPC832X) -#undef PVR_83xx -#define PVR_83xx 0x80840000 -#endif +#define PVR_E300C1 0x80830000 +#define PVR_E300C2 0x80840000 +#define PVR_E300C3 0x80850000 /* * Hardware Implementation-Dependent Register 0 (HID0) diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 26bc875f8..cd2463643 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -55,11 +55,13 @@ typedef struct global_data { #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; -#if defined (CONFIG_MPC834X) +#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X) u32 tsec1_clk; u32 tsec2_clk; - u32 usbmph_clk; u32 usbdr_clk; +#endif +#if defined (CONFIG_MPC834X) + u32 usbmph_clk; #endif /* CONFIG_MPC834X */ u32 core_clk; u32 i2c1_clk; diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 5e088d67d..0de93385f 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -206,7 +206,9 @@ typedef struct pmc83xx { u32 pmccr; /* PMC Configuration Register */ u32 pmcer; /* PMC Event Register */ u32 pmcmr; /* PMC Mask Register */ - u8 res0[0xF4]; + u32 pmccr1; /* PMC Configuration Register 1 */ + u32 pmccr2; /* PMC Configuration Register 2 */ + u8 res0[0xEC]; } pmc83xx_t; /* @@ -355,7 +357,8 @@ typedef struct lbus83xx { u8 res2[0x8]; u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ u32 mdr; /* UPM Data Register */ - u8 res3[0x8]; + u8 res3[0x4]; + u32 lsor; /* Special Operation Initiation Register */ u32 lsdmr; /* SDRAM Mode Register */ u8 res4[0x8]; u32 lurt; /* UPM Refresh Timer */ @@ -369,8 +372,14 @@ typedef struct lbus83xx { u8 res6[0xC]; u32 lbcr; /* Configuration Register */ u32 lcrr; /* Clock Ratio Register */ - u8 res7[0x28]; - u8 res8[0xF00]; + u8 res7[0x8]; + u32 fmr; /* Flash Mode Register */ + u32 fir; /* Flash Instruction Register */ + u32 fcr; /* Flash Command Register */ + u32 fbar; /* Flash Block Addr Register */ + u32 fpar; /* Flash Page Addr Register */ + u32 fbcr; /* Flash Byte Count Register */ + u8 res8[0xF08]; } lbus83xx_t; /* @@ -527,7 +536,7 @@ typedef struct pcictrl83xx { * USB */ typedef struct usb83xx { - u8 fixme[0x2000]; + u8 fixme[0x1000]; } usb83xx_t; /* @@ -574,7 +583,42 @@ typedef struct immap { ios83xx_t ios; /* Sequencer */ pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ u8 res5[0x19900]; - usb83xx_t usb; + usb83xx_t usb[2]; + tsec83xx_t tsec[2]; + u8 res6[0xA000]; + security83xx_t security; + u8 res7[0xC0000]; +} immap_t; + +#elif defined(CONFIG_MPC831X) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[1]; /* General purpose I/O module */ + u8 res0[0x1300]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res1[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res2[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res3[0x1000]; + spi83xx_t spi; /* Serial Peripheral Interface */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res4[0x80]; + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res5[0x1aa00]; + usb83xx_t usb[1]; tsec83xx_t tsec[2]; u8 res6[0xA000]; security83xx_t security; diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index cf3658310..b3ccdcea2 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -94,6 +94,7 @@ #define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */ #define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */ #define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */ +#define CFG_CMD_MFSL 0x8000000000000000ULL /* FSL support for Microblaze */ #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */ @@ -125,6 +126,7 @@ CFG_CMD_IRQ | \ CFG_CMD_JFFS2 | \ CFG_CMD_KGDB | \ + CFG_CMD_MFSL | \ CFG_CMD_MII | \ CFG_CMD_MMC | \ CFG_CMD_NAND | \ diff --git a/include/common.h b/include/common.h index b162dbd7c..3c4b37b0d 100644 --- a/include/common.h +++ b/include/common.h @@ -402,6 +402,10 @@ void ppcDcbi(unsigned long value); void ppcSync(void); void ppcDcbz(unsigned long value); #endif +#if defined (CONFIG_MICROBLAZE) +unsigned short in16(unsigned int); +void out16(unsigned int, unsigned short value); +#endif #if defined (CONFIG_MPC83XX) void ppcDWload(unsigned int *addr, unsigned int *ret); @@ -440,8 +444,6 @@ int sdram_adjust_866 (void); int adjust_sdram_tbs_8xx (void); #if defined(CONFIG_8260) int prt_8260_clks (void); -#elif defined(CONFIG_MPC83XX) -int print_clock_conf(void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); #endif diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h new file mode 100644 index 000000000..697631345 --- /dev/null +++ b/include/configs/MPC8313ERDB.h @@ -0,0 +1,561 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * mpc8313epb board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83XX 1 +#define CONFIG_MPC831X 1 +#define CONFIG_MPC8313 1 +#define CONFIG_MPC8313ERDB 1 + +#define CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI + +#ifdef CFG_66MHZ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ +#elif defined(CFG_33MHZ) +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#else +#error Unknown oscillator frequency. +#endif + +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +#define CFG_IMMR 0xE0000000 + +#define CFG_MEMTEST_START 0x00001000 +#define CFG_MEMTEST_END 0x07f00000 + +/* Early revs of this board will lock up hard when attempting + * to access the PMC registers, unless a JTAG debugger is + * connected, or some resistor modifications are made. + */ +#define CFG_8313ERDB_BROKEN_PMC 1 + +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +/* + * Manually set up DDR parameters, as this board does not + * seem to have the SPD connected to I2C. + */ +#define CFG_DDR_SIZE 128 /* MB */ +#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \ + | 0x00040000 /* TODO */ \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) + /* 0x80840102 */ + +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x00220802 */ +#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x3935d322 */ +#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | (31 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x0f9048ca */ /* P9-45,may need tuning */ +#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03200064 */ +#if defined(CONFIG_DDR_2T_TIMING) +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_2T_EN \ + | SDRAM_CFG_DBW_32 ) +#else +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_32_BE ) + /* 0x43080000 */ +#endif +#define CFG_SDRAM_CFG2 0x00401000; +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) + /* 0x44400232 */ +#define CFG_DDR_MODE_2 0x8000C000; + +#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CFG_DDRCDR_VALUE ( DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR ) + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ +#define CFG_FLASH_EMPTY_INFO /* display empty sectors */ +#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_9 \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD ) + /* 0xFF006FF7 TODO SLOW 16 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + */ +#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_2 /* 0x00010002 */ +#define CFG_LBC_LBCR ( 0x00040000 /* TODO */ \ + | (0xFF << LBCR_BMT_SHIFT) \ + | 0xF ) /* 0x0004ff0f */ + +#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */ + +/* drivers/nand/nand.c */ +#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE + +#define CFG_BR1_PRELIM ( CFG_NAND_BASE \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V ) /* valid */ +#define CFG_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR ) + /* 0xFFFF8396 */ +#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ + +#define CFG_VSC7385_BASE 0xF0000000 + +#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ +#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ +#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */ +#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */ + +/* local bus read write buffer mapping */ +#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ +#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ +#define CFG_LBLAWBAR3_PRELIM 0xFA000000 +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8313@0" +#define OF_SOC "soc8313@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500" + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* TSEC */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#define CONFIG_NET_MULTI + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_GMII 1 /* MII PHY management */ +#define CONFIG_MPC83XX_TSEC1 1 + +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC83XX_TSEC2 1 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x1c +#define TSEC2_PHY_ADDR 4 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1337 +#define CFG_I2C_RTC_ADDR 0x68 + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#else + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CFG_BASE_COMMANDS ( CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_DHCP \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + | CFG_CMD_DATE \ + | CFG_CMD_PCI) + +#define CONFIG_CMDLINE_EDITING 1 + +#define CFG_RAMBOOT_COMMANDS (CFG_BASE_COMMANDS & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS)) + +#if defined(CFG_RAMBOOT) +#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS +#else +#define CONFIG_COMMANDS CFG_BASE_COMMANDS +#endif + +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#ifdef CFG_66MHZ + +/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */ +/* 0x62040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#elif defined(CFG_33MHZ) + +/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */ +/* 0x65040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_5X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#endif + +/* 0xa0606c00 */ +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* System IO Config */ +#define CFG_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ +#define CFG_SICRL SICRL_USBDR /* Enable Internal USB Phy */ + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI2 not supported on 8313 */ +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:E0:0C:00:95:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8313erdb +#define CONFIG_ROOTPATH /nfs/root/path +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc8313erdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "ethprime=TSEC1\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 37bbfb336..906339e9d 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -154,6 +154,9 @@ #define CFG_MEMTEST_START 0x1000 /* memtest region */ #define CFG_MEMTEST_END 0x2000 +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + #ifdef CONFIG_HARD_I2C #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif diff --git a/include/configs/ml401.h b/include/configs/ml401.h index cb159e79d..3db287784 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -28,6 +28,7 @@ #include "../board/xilinx/ml401/xparameters.h" #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define MICROBLAZE_V5 1 #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ @@ -36,11 +37,11 @@ #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } /* setting reset address */ -#define CFG_RESET_ADDRESS TEXT_BASE +/*#define CFG_RESET_ADDRESS TEXT_BASE*/ /* ethernet */ #define CONFIG_EMACLITE 1 -#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES +#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID /* gpio */ #define CFG_GPIO_0 1 @@ -58,6 +59,10 @@ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +/* FSL */ +#define CFG_FSL_2 +#define FSL_INTR_2 1 + /* * memory layout - Example * TEXT_BASE = 0x1200_0000; @@ -93,7 +98,8 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ +/* start of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -117,6 +123,7 @@ #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #ifdef RAMENV #define CFG_ENV_IS_NOWHERE 1 @@ -135,6 +142,7 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ #ifdef FLASH @@ -152,8 +160,13 @@ CFG_CMD_IMI |\ CFG_CMD_NET |\ CFG_CMD_CACHE |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ + CFG_CMD_JFFS2 |\ + CFG_CMD_ECHO |\ CFG_CMD_IMLS |\ CFG_CMD_FLASH |\ + CFG_CMD_MFSL |\ CFG_CMD_PING \ ) #else /* !RAMENV */ @@ -174,6 +187,11 @@ CFG_CMD_FLASH |\ CFG_CMD_PING |\ CFG_CMD_ENV |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ + CFG_CMD_JFFS2 |\ + CFG_CMD_ECHO |\ + CFG_CMD_MFSL |\ CFG_CMD_SAVES \ ) @@ -189,16 +207,30 @@ CFG_CMD_BDI |\ CFG_CMD_RUN |\ CFG_CMD_LOADS |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_LOADB |\ CFG_CMD_IMI |\ CFG_CMD_NET |\ CFG_CMD_CACHE |\ + CFG_CMD_MFSL |\ CFG_CMD_PING \ ) #endif /* !FLASH */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +/* JFFS2 partitions */ +#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ +#define MTDIDS_DEFAULT "nor0=ml401-0" + +/* default mtd partition table */ +#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ + "256k(env),3m(kernel),1m(romfs),"\ + "1m(cramfs),-(jffs2)" +#endif + /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " #define CFG_CBSIZE 512 /* size of console buffer */ @@ -207,7 +239,7 @@ #define CFG_LONGHELP #define CFG_LOAD_ADDR 0x12000000 /* default load address */ -#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" @@ -221,10 +253,19 @@ #define CFG_HZ 1000 /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION -*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION + +#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" + +#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ + "nor0=ml401-0\0"\ + "mtdparts=mtdparts=ml401-0:"\ + "256k(u-boot),256k(env),3m(kernel),"\ + "1m(romfs),1m(cramfs),-(jffs2)\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index a2f48102f..b4c720d18 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -132,6 +132,8 @@ CFG_CMD_LOADS |\ CFG_CMD_LOADB |\ CFG_CMD_MISC |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_PING \ ) @@ -163,12 +165,12 @@ "base 0;" \ "echo" - /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE 0xCF000000 -#define CFG_SYSTEMACE_WIDTH 16 -#define CONFIG_DOS_PARTITION*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION #endif /* __CONFIG_H */ diff --git a/include/linux/stat.h b/include/linux/stat.h index 43fd53fc9..37f2924df 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -67,7 +67,8 @@ struct stat { #endif /* __PPC__ */ -#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) +#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) ||\ + defined (__microblaze__) struct stat { unsigned short st_dev; diff --git a/include/mpc83xx.h b/include/mpc83xx.h index c2a4ff587..60fc214b3 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -95,6 +95,11 @@ #define SPR_8321E_REV11 0x80660011 #define SPR_8321_REV11 0x80670011 +#define SPR_8311_REV10 0x80B30010 +#define SPR_8311E_REV10 0x80B20010 +#define SPR_8313_REV10 0x80B10010 +#define SPR_8313E_REV10 0x80B00010 + /* SPCR - System Priority Configuration Register */ #define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ @@ -121,6 +126,15 @@ #define SPCR_TSEC2BDP_SHIFT (31-29) #define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */ #define SPCR_TSEC2EP_SHIFT (31-31) + +#elif defined(CONFIG_MPC831X) +/* SPCR bits - MPC831x specific */ +#define SPCR_TSECDP 0x00003000 /* TSEC data priority */ +#define SPCR_TSECDP_SHIFT (31-19) +#define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */ +#define SPCR_TSECEP_SHIFT (31-21) +#define SPCR_TSECBDP 0x00000300 /* TSEC buffer descriptor priority */ +#define SPCR_TSECBDP_SHIFT (31-23) #endif /* SICRL/H - System I/O Configuration Register Low/High @@ -195,6 +209,36 @@ #define SICRL_PCI_MSRC 0x10000000 #define SICRL_URT_CTPR 0x06000000 #define SICRL_IRQ_CTPR 0x00C00000 + +#elif defined(CONFIG_MPC831X) +/* SICRL bits - MPC831x specific */ +#define SICRL_LBC 0x30000000 +#define SICRL_UART 0x0C000000 +#define SICRL_SPI_A 0x03000000 +#define SICRL_SPI_B 0x00C00000 +#define SICRL_SPI_C 0x00300000 +#define SICRL_SPI_D 0x000C0000 +#define SICRL_USBDR 0x00000C00 +#define SICRL_ETSEC1_A 0x0000000C +#define SICRL_ETSEC2_A 0x00000003 + +/* SICRH bits - MPC831x specific */ +#define SICRH_INTR_A 0x02000000 +#define SICRH_INTR_B 0x00C00000 +#define SICRH_IIC 0x00300000 +#define SICRH_ETSEC2_B 0x000C0000 +#define SICRH_ETSEC2_C 0x00030000 +#define SICRH_ETSEC2_D 0x0000C000 +#define SICRH_ETSEC2_E 0x00003000 +#define SICRH_ETSEC2_F 0x00000C00 +#define SICRH_ETSEC2_G 0x00000300 +#define SICRH_ETSEC1_B 0x00000080 +#define SICRH_ETSEC1_C 0x00000060 +#define SICRH_GTX1_DLY 0x00000008 +#define SICRH_GTX2_DLY 0x00000004 +#define SICRH_TSOBI1 0x00000002 +#define SICRH_TSOBI2 0x00000001 + #endif /* SWCRR - System Watchdog Control Register @@ -393,6 +437,28 @@ #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 +#if defined(CONFIG_MPC831X) +#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 +#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000 +#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 +#define HRCWH_ROM_LOC_NAND_LP_16BIT 0x00600000 + +#define HRCWH_RL_EXT_LEGACY 0x00000000 +#define HRCWH_RL_EXT_NAND 0x00040000 + +#define HRCWH_TSEC1M_IN_MII 0x00000000 +#define HRCWH_TSEC1M_IN_RMII 0x00002000 +#define HRCWH_TSEC1M_IN_RGMII 0x00006000 +#define HRCWH_TSEC1M_IN_RTBI 0x0000A000 +#define HRCWH_TSEC1M_IN_SGMII 0x0000C000 + +#define HRCWH_TSEC2M_IN_MII 0x00000000 +#define HRCWH_TSEC2M_IN_RMII 0x00000400 +#define HRCWH_TSEC2M_IN_RGMII 0x00000C00 +#define HRCWH_TSEC2M_IN_RTBI 0x00001400 +#define HRCWH_TSEC2M_IN_SGMII 0x00001800 +#endif + #if defined(CONFIG_MPC834X) #define HRCWH_TSEC1M_IN_RGMII 0x00000000 #define HRCWH_TSEC1M_IN_RTBI 0x00004000 @@ -523,6 +589,18 @@ #define SCCR_TSEC2CM_1 0x10000000 #define SCCR_TSEC2CM_2 0x20000000 #define SCCR_TSEC2CM_3 0x30000000 + +#elif defined(CONFIG_MPC831X) +/* TSEC1 bits are for TSEC2 as well */ +#define SCCR_TSEC1CM 0xc0000000 +#define SCCR_TSEC1CM_SHIFT 30 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 + +#define SCCR_TSEC1ON 0x20000000 +#define SCCR_TSEC2ON 0x10000000 + #endif #define SCCR_USBMPHCM 0x00c00000 @@ -556,6 +634,25 @@ #define CSCONFIG_COL_BIT_10 0x00000002 #define CSCONFIG_COL_BIT_11 0x00000003 +/* TIMING_CFG_0 - DDR SDRAM Timing Configuration 0 + */ +#define TIMING_CFG0_RWT 0xC0000000 +#define TIMING_CFG0_RWT_SHIFT 30 +#define TIMING_CFG0_WRT 0x30000000 +#define TIMING_CFG0_WRT_SHIFT 28 +#define TIMING_CFG0_RRT 0x0C000000 +#define TIMING_CFG0_RRT_SHIFT 26 +#define TIMING_CFG0_WWT 0x03000000 +#define TIMING_CFG0_WWT_SHIFT 24 +#define TIMING_CFG0_ACT_PD_EXIT 0x00700000 +#define TIMING_CFG0_ACT_PD_EXIT_SHIFT 20 +#define TIMING_CFG0_PRE_PD_EXIT 0x00070000 +#define TIMING_CFG0_PRE_PD_EXIT_SHIFT 16 +#define TIMING_CFG0_ODT_PD_EXIT 0x00000F00 +#define TIMING_CFG0_ODT_PD_EXIT_SHIFT 8 +#define TIMING_CFG0_MRS_CYC 0x00000F00 +#define TIMING_CFG0_MRS_CYC_SHIFT 0 + /* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1 */ #define TIMING_CFG1_PRETOACT 0x70000000 @@ -586,6 +683,17 @@ #define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 #define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ +#define TIMING_CFG2_ADD_LAT 0x70000000 +#define TIMING_CFG2_ADD_LAT_SHIFT 28 +#define TIMING_CFG2_WR_LAT_DELAY 0x00380000 +#define TIMING_CFG2_WR_LAT_DELAY_SHIFT 19 +#define TIMING_CFG2_RD_TO_PRE 0x0000E000 +#define TIMING_CFG2_RD_TO_PRE_SHIFT 13 +#define TIMING_CFG2_CKE_PLS 0x000001C0 +#define TIMING_CFG2_CKE_PLS_SHIFT 6 +#define TIMING_CFG2_FOUR_ACT 0x0000003F +#define TIMING_CFG2_FOUR_ACT_SHIFT 0 + /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 @@ -593,13 +701,14 @@ #define SDRAM_CFG_ECC_EN 0x20000000 #define SDRAM_CFG_RD_EN 0x10000000 #define SDRAM_CFG_SDRAM_TYPE 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 #define SDRAM_CFG_8_BE 0x00040000 #define SDRAM_CFG_NCAP 0x00020000 #define SDRAM_CFG_2T_EN 0x00008000 -#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 +#define SDRAM_CFG_BI 0x00000001 /* DDR_SDRAM_MODE - DDR SDRAM Mode Register */ @@ -732,11 +841,15 @@ #define BR_PS_32 0x00001800 /* Port Size 32 bit */ #define BR_DECC 0x00000600 #define BR_DECC_SHIFT 9 +#define BR_DECC_OFF 0x00000000 +#define BR_DECC_CHK 0x00000200 +#define BR_DECC_CHK_GEN 0x00000400 #define BR_WP 0x00000100 #define BR_WP_SHIFT 8 #define BR_MSEL 0x000000E0 #define BR_MSEL_SHIFT 5 #define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_FCM 0x00000020 /* FCM */ #define BR_MS_SDRAM 0x00000060 /* SDRAM */ #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ @@ -803,6 +916,34 @@ #define OR_GPCM_EAD 0x00000001 #define OR_GPCM_EAD_SHIFT 0 +#define OR_FCM_AM 0xFFFF8000 +#define OR_FCM_AM_SHIFT 15 +#define OR_FCM_BCTLD 0x00001000 +#define OR_FCM_BCTLD_SHIFT 12 +#define OR_FCM_PGS 0x00000400 +#define OR_FCM_PGS_SHIFT 10 +#define OR_FCM_CSCT 0x00000200 +#define OR_FCM_CSCT_SHIFT 9 +#define OR_FCM_CST 0x00000100 +#define OR_FCM_CST_SHIFT 8 +#define OR_FCM_CHT 0x00000080 +#define OR_FCM_CHT_SHIFT 7 +#define OR_FCM_SCY 0x00000070 +#define OR_FCM_SCY_SHIFT 4 +#define OR_FCM_SCY_1 0x00000010 +#define OR_FCM_SCY_2 0x00000020 +#define OR_FCM_SCY_3 0x00000030 +#define OR_FCM_SCY_4 0x00000040 +#define OR_FCM_SCY_5 0x00000050 +#define OR_FCM_SCY_6 0x00000060 +#define OR_FCM_SCY_7 0x00000070 +#define OR_FCM_RST 0x00000008 +#define OR_FCM_RST_SHIFT 3 +#define OR_FCM_TRLX 0x00000004 +#define OR_FCM_TRLX_SHIFT 2 +#define OR_FCM_EHTR 0x00000002 +#define OR_FCM_EHTR_SHIFT 1 + #define OR_UPM_AM 0xFFFF8000 #define OR_UPM_AM_SHIFT 15 #define OR_UPM_XAM 0x00006000 @@ -1019,4 +1160,118 @@ #define PIWAR_IWS_1G 0x0000001D #define PIWAR_IWS_2G 0x0000001E +/* PMCCR1 - PCI Configuration Register 1 + */ +#define PMCCR1_POWER_OFF 0x00000020 + +/* FMR - Flash Mode Register + */ +#define FMR_CWTO 0x0000F000 +#define FMR_CWTO_SHIFT 12 +#define FMR_BOOT 0x00000800 +#define FMR_ECCM 0x00000100 +#define FMR_AL 0x00000030 +#define FMR_AL_SHIFT 4 +#define FMR_OP 0x00000003 +#define FMR_OP_SHIFT 0 + +/* FIR - Flash Instruction Register + */ +#define FIR_OP0 0xF0000000 +#define FIR_OP0_SHIFT 28 +#define FIR_OP1 0x0F000000 +#define FIR_OP1_SHIFT 24 +#define FIR_OP2 0x00F00000 +#define FIR_OP2_SHIFT 20 +#define FIR_OP3 0x000F0000 +#define FIR_OP3_SHIFT 16 +#define FIR_OP4 0x0000F000 +#define FIR_OP4_SHIFT 12 +#define FIR_OP5 0x00000F00 +#define FIR_OP5_SHIFT 8 +#define FIR_OP6 0x000000F0 +#define FIR_OP6_SHIFT 4 +#define FIR_OP7 0x0000000F +#define FIR_OP7_SHIFT 0 +#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ +#define FIR_OP_CA 0x1 /* Issue current column address */ +#define FIR_OP_PA 0x2 /* Issue current block+page address */ +#define FIR_OP_UA 0x3 /* Issue user defined address */ +#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ +#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ +#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ +#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ +#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ +#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ +#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ +#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ +#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ +#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ +#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ +#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */ + +/* FCR - Flash Command Register + */ +#define FCR_CMD0 0xFF000000 +#define FCR_CMD0_SHIFT 24 +#define FCR_CMD1 0x00FF0000 +#define FCR_CMD1_SHIFT 16 +#define FCR_CMD2 0x0000FF00 +#define FCR_CMD2_SHIFT 8 +#define FCR_CMD3 0x000000FF +#define FCR_CMD3_SHIFT 0 + +/* FBAR - Flash Block Address Register + */ +#define FBAR_BLK 0x00FFFFFF + +/* FPAR - Flash Page Address Register + */ +#define FPAR_SP_PI 0x00007C00 +#define FPAR_SP_PI_SHIFT 10 +#define FPAR_SP_MS 0x00000200 +#define FPAR_SP_CI 0x000001FF +#define FPAR_SP_CI_SHIFT 0 +#define FPAR_LP_PI 0x0003F000 +#define FPAR_LP_PI_SHIFT 12 +#define FPAR_LP_MS 0x00000800 +#define FPAR_LP_CI 0x000007FF +#define FPAR_LP_CI_SHIFT 0 + +/* LTESR - Transfer Error Status Register + */ +#define LTESR_BM 0x80000000 +#define LTESR_FCT 0x40000000 +#define LTESR_PAR 0x20000000 +#define LTESR_WP 0x04000000 +#define LTESR_ATMW 0x00800000 +#define LTESR_ATMR 0x00400000 +#define LTESR_CS 0x00080000 +#define LTESR_CC 0x00000001 + +/* DDR Control Driver Register + */ +#define DDRCDR_EN 0x40000000 +#define DDRCDR_PZ 0x3C000000 +#define DDRCDR_PZ_MAXZ 0x00000000 +#define DDRCDR_PZ_HIZ 0x20000000 +#define DDRCDR_PZ_NOMZ 0x30000000 +#define DDRCDR_PZ_LOZ 0x38000000 +#define DDRCDR_PZ_MINZ 0x3C000000 +#define DDRCDR_NZ 0x3C000000 +#define DDRCDR_NZ_MAXZ 0x00000000 +#define DDRCDR_NZ_HIZ 0x02000000 +#define DDRCDR_NZ_NOMZ 0x03000000 +#define DDRCDR_NZ_LOZ 0x03800000 +#define DDRCDR_NZ_MINZ 0x03C00000 +#define DDRCDR_ODT 0x00080000 +#define DDRCDR_DDR_CFG 0x00040000 +#define DDRCDR_M_ODR 0x00000002 +#define DDRCDR_Q_DRN 0x00000001 + +#ifndef __ASSEMBLY__ +struct pci_region; +void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot); +#endif + #endif /* __MPC83XX_H__ */ |