summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-11-03mpc83xx: Lindent and clean up cpu/mpc83xx/speed.cKim Phillips
2006-11-03mpc83xx: Fix the incorrect dcbz operationDave Liu
The 834x rev1.x silicon has one CPU5 errata. The issue is when the data cache locked with HID0[DLOCK], the dcbz instruction looks like no-op inst. The right behavior of the data cache is when the data cache Locked with HID0[DLOCK], the dcbz instruction allocates new tags in cache. The 834x rev3.0 and later and 8360 have not this bug inside. So, when 834x rev3.0/8360 are working with ECC, the dcbz instruction will corrupt the stack in cache, the processor will checkstop reset. However, the 834x rev1.x can work with ECC with these code, because the sillicon has this cache bug. The dcbz will not corrupt the stack in cache. Really, it is the fault code running on fault sillicon. This patch fix the incorrect dcbz operation. Instead of CPU FP writing to initialise the ECC. CHANGELOG: * Fix the incorrect dcbz operation instead of CPU FP writing to initialise the ECC memory. Otherwise, it will corrupt the stack in cache, The processor will checkstop reset. Signed-off-by: Dave Liu <daveliu@freescale.com>
2006-11-03mpc83xx: add OF_FLAT_TREE bits to 83xx boardsKim Phillips
add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and STDOUT_PATH configuration bits to mpc8349emds, mpc8349itx, and mpc8360emds board code. redo environment to use bootm with the fdtaddr for booting ARCH=powerpc kernels by default, and provide default fdtaddr values.
2006-11-03mpc83xx: change ft code to modify local-mac-address propertyKim Phillips
Update 83xx OF code to update local-mac-address properties for ethernet instead of the obsolete 'address' property.
2006-11-03mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and ↵Timur Tabi
MPC8360EMDS This patch also adds an improved I2C set_speed(), which handles all clock frequencies. Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03mpc83xx: add the README.mpc8360emdsDave Liu
add doc/README.mpc8360emds to accompany the new board support
2006-11-03mpc83xx: add QE ethernet supportDave Liu
this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
2006-11-03mpc83xx: Add MPC8360EMDS basic board supportDave Liu
Add support for the Freescale MPC8360EMDS board. Includes DDR, DUART, Local Bus, PCI.
2006-11-03mpc83xx: add the QUICC Engine (QE) immap fileDave Liu
common QE immap file. Also required for 8360.
2006-11-03mpc83xx: Add 8360 specifics to 83xx immapDave Liu
Mainly add QE device dependencies, with appropriate 8360 protection. Lindent also run.
2006-11-03mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITXTimur Tabi
PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" CHANGELOG: * For the 8349E-mITX, fix some size values in pci_init_board(), enable the clock for the 2nd USB board (Linux kernel will hang otherwise), and fix the CONFIG_BOOTARGS macro. Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03mpc83xx: Add support for the MPC8349E-mITXTimur Tabi
PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006090742000024 "Add support for multiple I2C buses" 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" CHANGELOG: * Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time. Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03Additional MPC8349 support for multibus i2cBen Warren
Hello, Here is a patch for a file that was accidentally left out of a previous attempt. It accompanies the patch with ticket DNX#2006090742000024 CHANGELOG: Change PCI initialization to use new multi-bus I2C API. regards, Ben
2006-11-03Multi-bus I2C implementation of MPC834xBen Warren
Hello, Attached is a patch implementing multiple I2C buses on the MPC834x CPU family and the MPC8349EMDS board in particular. This patch requires Patch 1 (Add support for multiple I2C buses). Testing was performed on a 533MHz board. /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ Signed-off-by: Ben Warren <bwarren@qstreams.com> CHANGELOG: Implemented driver-level code to support two I2C buses on the MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds are 50kHz, 100kHz and 400kHz on each bus. regards, Ben
2006-11-03Add support for multiple I2C busesBen Warren
Hello, Attached is a patch providing support for multiple I2C buses at the command level. The second part of the patch includes an implementation for the MPC834x CPU and MPC8349EMDS board. /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ Signed-off-by: Ben Warren <bwarren@qstreams.com> Overview: 1. Include new 'i2c' command (based on USB implementation) using CONFIG_I2C_CMD_TREE. 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that the commands to change bus number and speed are only available under the new 'i2c' command mentioned in the first bullet. 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form of an array of bus-device pairs. Otherwise, it is an array of uchar. CHANGELOG: Added new 'i2c' master command for all I2C interaction. This is conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for setting I2C bus speed as well as changing the active bus if the board has more than one (conditionally compiled with CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. Updated README. regards, Ben
2006-11-03mpc83xx: Add support for Errata DDR6 on MPC 834x systemsTimur Tabi
CHANGELOG: * Errata DDR6, which affects all current MPC 834x processors, lists changes required to maintain compatibility with various types of DDR memory. This patch implements those changes. Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for itTimur Tabi
2006-11-03mpc83xx: Add support for variable flash memory sizes on 83xx systemsTimur Tabi
CHANGELOG: * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access window registers, instead of using a hard-coded value of 8MB. Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03mpc83xx: Unified TQM834x variable names with 83xx and consolidated macrosTanya Jiang
Unified TQM834x variable names with 83xx and consolidated macro in preparation for the 8360 and other upcoming 83xx devices. Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
2006-11-03mpc83xx: Changed to unified mpx83xx names and added common 83xx changesDave Liu
Incorporated the common unified variable names and the changes in preparation for releasing mpc8360 patches. Signed-off-by: Dave Liu <daveliu@freescale.com>
2006-11-03mpc83xx: Fix missing build for mpc8349emds pci.cTanya Jiang
Make pci build for mpc8349emds Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
2006-11-03mpc83xx: Removed unused file resetvec.S for mpc83xx cpuTanya Jiang
Removed unused file resetvec.S for mpc83xx cpu Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
2006-11-03NAND Flash verify across block boundariesNick Spence
This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is defined and the write crosses a block boundary. The pointer to the verification buffer (bufstart) is not being updated to reflect the starting of the new block so the verification of the second block fails. CHANGELOG: * Fix NAND FLASH page verification across block boundaries
2006-11-03Added RGMII support to the TSECs and Marvell 881111 PhyNick Spence
Added a phy initialization to adjust the RGMII RX and TX timing Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode Signed-off-by: Nick Spence <nick.spence@freescale.com>
2006-11-02Merge with /home/tur/proj/uboot_linux_v38b/u-bootWolfgang Denk
2006-11-02Release U-Boot 1.1.6Wolfgang Denk
2006-11-01Finish up support for MarelV38B boardBartlomiej Sieka
- add watchdog support - enable GPIO_WKUP_7 pin for input - code cleanup
2006-11-01- Fix issues related to the use of ELDK 4 when compiling for MarelV38B:Bartlomiej Sieka
* remove warnings when compiling ethaddr.c * adjust linker script (fixes a crash resulting from incorrect definition of __u_boot_cmd_start) - Some MarelV38B code cleanup.
2006-11-01- Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change theBartlomiej Sieka
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with MPC5XXX_WU_GPIO_DATA_O for affected boards. - Add defintions for some MPC5XXX GPIO pins.
2006-11-01Changed MarelV38B board make target to lowercase. Config file cleanup.Bartlomiej Sieka
2006-10-29Merge with /home/sr/git/u-boot/nand-ladisWolfgang Denk
2006-10-29Automatically adjust ARFLAGS so "make -s" is really silent.Wolfgang Denk
2006-10-28[PATCH] omap925.c: Remove unused functionsStefan Roese
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
2006-10-28[PATCH] Add some missing machtypes for netstar & voiceblue boardsStefan Roese
Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of numbers in code. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
2006-10-28[PATCH] NAND: Partition name support added to NAND subsystemStefan Roese
chpart, nboot and NAND subsystem related commands now accept also partition name to specify offset. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
2006-10-28Update CHANGELOG.Wolfgang Denk
2006-10-28Enable commandline editing and hush shell on all TQM boards.Wolfgang Denk
2006-10-28README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETEWolfgang Denk
2006-10-28Check for illegal character '=' in environment variable names.Wolfgang Denk
Make sure the string passed as variable name does not contain a '=' character. This not only prevents the common error or typing "setenv foo=bar" instead of "setenv foo bar", but (more importantly) also closes a backdoor which allowed to delete write-protected environment variables, for example by using "setenv ethaddr=".
2006-10-28Minor code cleanup.Wolfgang Denk
2006-10-27Don't pass any debug options directly to the assemblerHaavard Skinnemoen
When passing the -g option to gcc, gcc automatically selects a suitable --g<format> option to pass on to the assembler. Thus, there's no point in forcing a specific debug option on the assembler using the -Wa mechanism. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-27MPC86xx: Cleaned up unused and conditionally used local variables.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-27Fix "ar" flags in some Makefiles to allow for silent "make -s"Wolfgang Denk
2006-10-26Fix TSEC driver (now for real): avoid crashes if PHY is not attachedBen Warren
to a TSEC (e.g. a switch is connected via RMII) or if the PHY is defective/incorrectly configured. Signed-off-by: Ben Warren <bwarren@qstreams.com>
2006-10-26Fix TSEC driver: avoid crashes if PHY is not attachedBen Warren
to a TSEC (e.g. a switch is connected via RMII) or if the PHY is defective/incorrectly configured. Signed-off-by: Ben Warren <bwarren@qstreams.com>
2006-10-26Code cleanup.Wolfgang Denk
2006-10-26Merge with git://git.kernel.org/pub/scm/boot/u-boot/galak/u-boot.git#device_treeWolfgang Denk
2006-10-25Finish up support for the ATSTK1000/ATSTK1002 boardsHaavard Skinnemoen
Add atstk1002_config target to Makefile and move the AVR32 section down below Blackfin so that it doesn't end up in the middle of MIPS. Drop the autogenerated linker script thing for now. Will have to revisit how to handle chips with different flash and RAM layout later. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24Added support for Multi-Image files that contain a device treeKumar Gala
If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically get copied to system memory as part of boot. Previously an error was reported if one tried to boot a device tree that was in flash. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-10-25Fix Makefile for "CHANGELOG" targetWolfgang Denk
Merge with /home/sr/git/u-boot/4xx-idcr
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-29 16:28:45 +0000