summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-24ppc/85xx: Clean up p1_p2_rdb PCI setupKumar Gala
General code cleanup to use in/out IO accessors as well as making the code that prints out info sane between board and generic fsl pci code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24ppc/85xx: Simplify the top makefile for P1_P2_RDB boardsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24ppc/85xx: Simplify the top makefile for 36-bit config for P2020DSKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DSKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24ppc/85xx: simplify the top makefile for 36-bit config for mpc8536dsMingkai Hu
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24ppc/85xx: Fix LCRR_CLKDIV definesKumar Gala
For some reason the CLKDIV field varies between SoC in how it interprets the bit values. All 83xx and early (e500v1) PQ3 devices support: clk/2: CLKDIV = 2 clk/4: CLKDIV = 4 clk/8: CLKDIV = 8 Newer PQ3 (e500v2) and MPC86xx support: clk/4: CLKDIV = 2 clk/8: CLKDIV = 4 clk/16: CLKDIV = 8 Ensure that the MPC86xx and MPC85xx still get the same behavior and make the defines reflect their logical view (not the value of the field). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-24Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2009-09-24Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk
2009-09-24Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2009-09-23ubifs: Add support for looking up directory and relative symlinksSimon Kagstrom
This patch adds support for resolving symlinks to directories as well as relative symlinks. Symlinks are now always resolved during file lookup, so the load stage no longer needs to special-case them. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-23ppc4xx: Fix PCIE PLL lock on 440SPe Yucca boardRupjyoti Sarmah
u-boot reports a PCIE PLL lock error at boot time on Yucca board, and left PCIe nonfunctional. This is fixed by making u-boot function ppc4xx_init_pcie() to wait 300 uS after negating reset before the first check of the PLL lock. Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-23ppc4xx: Make DDR2 timing for intip more robustDirk Eibach
DDR2 timing for intip was on the edge for some of the available chips for this board. Now it is verfied to work with all of them. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-22board/linkstation/ide.c: Fix compile warningWolfgang Denk
Fix warning: ide.c:60: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Guennadi Liakhovetski <lg@denx.de>
2009-09-22ppc: Clean up calling of phy_reset() during initPeter Tyser
Remove board-specific #ifdefs for calling phy_reset() during initializtion Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-22ppc: Clean up calling of misc_init_r() during initPeter Tyser
Remove board-specific #ifdefs for calling misc_init_r() during initializtion Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Heiko Schocher <hs@denx.de>
2009-09-22Remove deprecated 'autoscr' command/variablesPeter Tyser
The more standard 'source' command provides identical functionality to the autoscr command. Environment variable names/values on the MVBC_P, MVBML7, kmeter1, mgcoge, and km8xx boards are updated to no longer refernce 'autoscr'. The 'autoscript' and 'autoscript_uname' environment variables are also removed. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: Heiko Schocher <hs@denx.de>
2009-09-22mpc512x. Micron nand flash needs a reset before a read command is issued.Paul Gibson
Micron nand flash needs a reset before a read command is issued. The current mpc5121_nfc driver ignores the reset command.
2009-09-22FDT: remove obsolete OF_CPU and OF_SOC macros.Marcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Heiko Schocher <hs@denx.de>
2009-09-18board/flagadm/flash.c: fix compile warningWolfgang Denk
Fix warning: flash.c:531: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kári Davíđsson <kd@flaga.is>
2009-09-18Merge branch 'warning-cleanup'Wolfgang Denk
2009-09-17Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2009-09-17Correct ffs/fls regression for PowerPC etcSimon Kagstrom
Commits 02f99901ed1c9d828e3ea117f94ce2264bf8389e 52d61227b66d4099b39c8309ab37cb67ee09a405 introduced a regression where platform-specific ffs/fls implementations were defined away. This patch corrects that by using PLATFORM_xxx instead of the name itself. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de>
2009-09-17ppc4xx: Consolidate get_OPB_freq()Stefan Roese
All 4xx variants had their own, mostly identical get_OPB_freq() function. Some variants even only had the OPB frequency calculated in this routine and not supplied the sys_info.freqOPB variable correctly (e.g. 405EZ). This resulted in incorrect OPB values passed via the FDT to Linux. This patch now removes all those copies and only uses one function for all 4xx variants (except for IOP480 which doesn't have an OPB). Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-17ppc4xx: Enable commands for FDT enabled Linux booting on AMCC AcadiaStefan Roese
Acadia still used the "old" arch/ppc bootm commands for booting Linux images without FDT. This patch now enables these fdt-aware boot commands for Acadia as well. Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-17ppc4xx: Fix 405EZ uart base baud calculationStefan Roese
With this fix, Linux correctly configures the baudrate when booting with FDT passed from U-Boot to Linux. Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-15ppc/85xx: Disable all async interrupt sources when we bootKumar Gala
We should make sure to clear MSR[ME, CE, DE] when we boot an OS image since we have changed the exception vectors and the OSes vectors might not be setup we should avoid async interrupts at all costs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: Split out cpu_init_early into its own file for NAND_SPLKumar Gala
By pulling out cpu_init_early we can build just it and not all of cpu_init for NAND_SPL. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: Change cpu_init_early_f so we can use with NAND SPLKumar Gala
Use write_tlb and don't use memset so we can use the same code for cpu_init_early_f between NAND SPL and not. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15NAND boot: change NAND loader's relocate SP to CONFIG paramMingkai Hu
So that we can set the NAND loader's relocate stack pointer to the value other than the relocate address + 0x10000. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: add boot from NAND/eSDHC/eSPI supportMingkai Hu
The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM. For all three bootup methods, the bootup process can be divided into two stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image to configure all the hardware and boot up to U-Boot command line. When boot from NAND, the eLBC controller will first load the first stage image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NAND loader, will initialize the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K NAND loader's code comes from the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL. When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it. The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: Move code around to prep for NAND_SPLKumar Gala
If we move some of the functions in tlb.c around we need less ifdefs. The first stage loader just needs invalidate_tlb and init_tlbs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: Repack tlb_table to save spaceKumar Gala
We can pack the initial tlb_table in MAS register format and use write_tlb to set things up. This savings can be helpful for NAND style first stage boot loaders. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: Introduce low level write_tlb functionKumar Gala
Factor out the code we use to actually write a tlb entry. set_tlb is a logical view of the TLB while write_tlb is a low level matching the MAS registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: Enable usb ehci support for p2020ds boardRoy Zang
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/8xxx: Misc DDR related fixesKumar Gala
* Fix setting of ESDMODE (MR1) register - the bit shifting was wrong * Fix the format string to match size in a debug print Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15ppc/85xx: Remove some bogus code from external interrupt handler.Scott Wood
Skipping the interrupted instruction will accomplish nothing other than turning a spurious interrupt into a crash. External interrupts are not machine checks, so don't count them as such. Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-09-15ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.Scott Wood
Its reset value is random, and we sometimes read uninitialized TLB arrays. Make sure that we don't retain MAS8 from reading such an entry if the VF bit in MAS8 is set, attempts to use the mapping will trap. Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-09-15ppc/85xx: Don't enable interrupts before we're readyScott Wood
We cannot handle any exceptions while running in AS1, as the exceptions will transition back to AS0 without a valid mapping. Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-09-15mpc8260: remove Ethernet node fixup to use generic FDT code.Marcel Ziswiler
Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its configs for the common mpc8260 code to use generic Ethernet fixup. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> Tested-by: Heiko Schocher <hs@denx.de>
2009-09-15tools/netconsole: use ncb automatically if availableMike Frysinger
The standard netcat, while ubiquitous, doesn't handle broadcast udp packets properly. The local ncb util does however. So if ncb can be located in the standard locations, automatically use that instead. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-15tools/netconsole: make a bit more robustMike Frysinger
The netcat utility likes to exit when it receives an empty packet (as it thinks this means EOF). This can easily occur when working with command line editing as this behavior will be triggered when using backspace. Or with tabs and command line completion. So create two netcat processes - one to only listen (and put it into a loop), and one to do the sending. Once the user quits the transmitting netcat, the listening one will be killed automatically. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-15arm: Define test_and_set_bit and test_and_clear bit for ARMSimon Kagstrom
Needed for (e.g.) ubifs support to work. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-09-15Define ffs/fls for all architecturesSimon Kagstrom
UBIFS requires fls(), which is not defined for arm (and some other architectures) and this patch adds it. The implementation is taken from Linux and is generic. ffs() is also defined for those that miss it. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-09-15arm: Make arm bitops endianness-independentSimon Kagstrom
Bring over the bitop implementations from the Linux include/asm-generic/bitops/non-atomic.h to provide endianness-independence. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-09-15Move __set/clear_bit from ubifs.h to bitops.hSimon Kagstrom
__set_bit and __clear_bit are defined in ubifs.h as well as in asm/include/bitops.h for some architectures. This patch moves the generic implementation to include/linux/bitops.h and uses that unless it's defined by the architecture. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-09-15standalone: convert to kbuild styleMike Frysinger
Clean up the arch/cpu/board/config checks as well as redundant setting of srec/bin variables by using the kbuild VAR-$(...) style. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-15mkconfig: split the board make target to multiple config targetsWolfgang Denk
To simplify the top level makefile it useful to be able to parse the top level makefile target to multiple individual target, then put them to the config.h, leave the board config file to handle the different targets. Note that this method uses the '_'(underline) as the delimiter when splits the board make target. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> This also reverts commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-15Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk
2009-09-15Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2009-09-15kwbimage.c: Fix compile warning when building on 64 bit systems (again)Wolfgang Denk
Commit 51003b89 attempted to fix a build problem on 64 bit systems, but just turned it into a build problem on 32 bit systems (silly me). Now do the Right Thing (TM) and use a "%zu" printf format. Also fix spelling error. Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 05:30:09 +0000