Age | Commit message (Collapse) | Author |
|
Fixed coverity and compiler warning in drivers/spi/u8500_spi.c.
Also removed a variable which is no longer needed after the
GPIO-handling was removed from the driver.
ST-Ericsson ID: None
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Iea067014c2c2ea4bd4367eccbe1cde36c69e01da
Signed-off-by: Markus Helgesson <markus.helgesson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13763
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
|
|
This patch changes the display initialization to only activate the
display related clocks that are actually needed for the selected
display mode, DSI or DPI. It also removes two compile time warnings.
ST-Ericsson ID: CR 321311
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I5ae07bd06ae02c2e7c1a0f7860b251f35a953e99
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13587
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com>
|
|
db8500 v2.1 has a new ASIC ID. Add it to the function table.
Without this patch and with CONFIG_ITP_LOAD, U-Boot will hang on a
db8500 v2.1
Change-Id: I819663e698aa6667f5831575db87ded2c9f0c5c2
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/14476
Reviewed-by: QATOOLS
Reviewed-by: Jens WIKLANDER <jens.wiklander@stericsson.com>
Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Reviewed-by: Martin HOVANG <martin.xm.hovang@stericsson.com>
|
|
With newer PRCMU FW (2.0.6), clearing of the Ack mailbox interrupt is
enforced.
This patch clears the Ack mailbox interrupt.
ST-Ericsson ID: ER 322248
Change-Id: I38c7af5a375230c22b61db6cc46283c01ff39727
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/14201
Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Ulf MORLAND <ulf.morland@stericsson.com>
Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
Tested-by: Jonas SKARSTAM <jonas.skarstam@stericsson.com>
|
|
ST-Ericsson ID: -
Change-Id: Ia578aac003204392564a74860966a959ad82117b
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13917
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
ST-Ericsson ID: 321908
Change-Id: Ib51c36558e37c7f52db638052644758e6d3cc51a
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13848
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
This code was added by ST-Ericsson to the mainline code.
Remove it, since its whole purpose was for debugging/testing.
Furthermore Coverity found 4 defects in it.
ST-Ericsson ID: ER 273353
Change-Id: I9e23f399a68c88bc250b280c3bc418da7217f8d3
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13292
Reviewed-by: QATOOLS
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
|
|
The HREFP 2.0 V60 has no GPIO expander and the display reset IO line
was moved to an ordinary GPIO line.
Furthermore move the board dependent routine out from the mcde driver
into u8500.c
ST-Ericsson ID: CR 272893
Change-Id: If1362cecaeb183e67273066f759e220672f4537f
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13480
Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
|
|
Verification of the kernel and ITP signature before allowing to boot is
added. This feature is configurable and by default not activated. MeeGo-
built RPM will have this enabled.
ST-Ericsson ID: WP275634, ER275440
Change-Id: Ib888f39dd5dca1bc8b7d6e1b002da83a77908b07
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11415
Tested-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Jens WIKLANDER <jens.wiklander@stericsson.com>
|
|
Place output from u-boot build in directory specified by
Android product configuration.
ST-Ericsson ID: 277228
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ibc93d0e305400d2d3064b3bbdda993fd13909227
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9858
Reviewed-by: QATOOLS
Tested-by: Axel FAGERSTEDT <axel.fagerstedt@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
This adds the correct calculation for high capacity mmc.
ST-Ericsson ID: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4a6b152d02f22d4abba790177fcfb200ba853192
Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13312
Reviewed-by: QATOOLS
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
The cut-off voltage for AB8500 is set too high in the OTP.
To be able to start with a charger from a drained battery,
we have to lower this threshold before the backlight and
display is started.
ST-Ericsson ID: ER320113
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ia5c8c5b749fa9cb9cf8a15072ddfe5b0d1f33f5f
Signed-off-by: Johan Palsson <johan.palsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13028
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Removes enable interrupts for mcde mistakenly inherited from the kernel
code. Furthermore three printfs has been changed to debug.
ST-Ericsson ID: ER320412
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ifd68404ecf36b040166b900cd51f6d503e4d2ef6
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/12876
Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
Reviewed-by: Anders BAUER <anders.bauer@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
The HREFP 2.0 V60 has no GPIO expander, therefore some GPIO lines
were moved around.
The preferred approach was to first check if there is a machid in the
environment. And if not try to program the GPIOE. If that fails, assume
it is a V60 or newer.
But for the splash screen, we need to know very early on which HW
version we are running. At that time no environment is available,
therefore it is unavoidable to do the I2C access (10 ms timeout), if
both HW versions shall be supported in one binary.
CAUTION: you need also a Linux kernel which supports MACH_TYPE_HREFV60.
Older U8500 kernels will not even issue a start-up message.
Depends-On: http://gerrit.lud.stericsson.com/gerrit/12335
ST-Ericsson ID: CR 272893
Change-Id: Id794df8c185dfbf67f7bce81deb49abf71129f7b
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/12578
Reviewed-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
|
|
This patch introduces combined DSI and DPI display support for u-boot.
The code is also similar to the kernel code for easy maintenance.
ST-Ericsson ID: ER319241
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10069
Change-Id: Ic232b6f738348cbedb67e27418678ddd223d7800
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11038
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
|
|
The git version have been missing in the boot log when building in MeeGo,
since MeeGo is building in OBS and not in git source tree.
This patch adds a customized git2obs script that will both archive the
git and generate a correct version file. The version file will then
be used by the Makefile when building.
ST-Ericsson ID: 317452
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I22edc5d94b909307dd1539c4ff8645f771f12306
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11432
Reviewed-by: QATOOLS
Reviewed-by: Robert MARKLUND <robert.marklund@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
make distclean removes all .bin files.
This patch limits it to generated .bin files.
ST-Ericsson ID: ER282970
Change-Id: I31099cdcfaf465aa0d0f4db633dfc545755cba2d
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11327
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
|
|
General removal of executable permission of built source and header files,
i.e. changing permission from 755 to 644.
ST-Ericsson ID: None
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic3cfc551d1ef1b1f0b5825f9916d1fc15b15b444
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/10896
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
|
|
Splitting security related code from itp.c into sec_bridge.c
ST-Ericsson ID: WP275634
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I813daf0d0eaea4645e7d990bf467f19b0af968db
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/10895
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
itp.c and cspsa_fp.c is SoC specific, not board specific.
Other db8500 based boards need it as well, therefore move it into
the SoC directory.
ST-Ericsson ID: WP275634
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I386c0d84e9f44f18ded0d9059fc2dae4c27974f2
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/10894
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
|
|
This change makes it possible to use a bitmap file (.bmp) as the splash
image. This also removes the need to specify width and height of the
splash image. RLE compression, 1 and 4 bit formats are not supported.
ST-Ericsson ID: AP281072
Change-Id: I7c9ae953ad0440b665bb03ed1b9bbf43bab04e91
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9406
Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Copied the GPIO configurator written for the Linux kernel.
The Nomadik db8500 GPIO driver. Purpose is to be able
to just cut-n-paste the GPIO config from Linux to U-boot.
Also at the same time remove the obsolete and old
gpio_alt_funcenable/disable methods.
Now all is configured using a table in u8500.c.
Now drivers doesn't have to worry about setting up the GPIO pins.
Actually no driver today uses GPIO pins directly, only via
hardware blocks within db8500. Functions are still added
to be able to interact directly with a GPIO pin. This also
cleaned up a lot of driver by not having to bit manipulate GPIO
registers them self.
The new driver is called db8500_gpio and placed in driver/gpio/.
Functions are in include/db8500_gpio.h:
void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull);
void db8500_gpio_make_input(unsigned gpio);
int db8500_gpio_get_input(unsigned gpio);
void db8500_gpio_make_output(unsigned gpio, int val);
void db8500_gpio_set_output(unsigned gpio, int val);
And for the configurator in include/db8500_pincfg.h:
void db8500_gpio_config_pins(pin_cfg_t *cfgs, size_t num);
All in all the final binary size has decreased.
This is only done for db8500 nomadik GPIO. The code for gpio
expanders has not been touched.
All references to Nomadik has been removed in this driver.
Only db8500 is left.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: I90aa1d46c813ffb5a777c3492b5751f5054f71cf
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9904
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Clean up of PRCMU code in db8500 SoC code. Move things from cpu.c
and clock.h to prcmu.c. Also remove duplicate #defines and have
prcmu.c use the #defines in prcmu.h.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: Ieffb0094b3f43f0c88f3ed457c6cb296fa0ce378
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9899
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Enable CONFIG_DISPLAY_CPUINFO and implement print_cpuinfo() in
cpu/arm_cortexa9/db8500.c.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: Id4f67b223fabc4a8007229f8db12bd2a7362f8c2
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7115
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Moved clock code from board/st/u8500/u8500.c to
cpu/arm_cortexa9/db8500/clock.c.
Remove code to simulate Maja clocks.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: Ibbb21d53091ceaddcc01e1a195e129039f986696
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7114
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Moved u8500_is_earlydrop() and cpu_is_u8500*() to
include/asm-arm/arch-db8500/cpu.h.
They are kept in cpu.h as the functions are very small and
should be inlined with each use of them.
The final binary actually also became around 100 bytes smaller.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: Ied553b7c8a004a37c70c3e328a069ae8b2a92b23
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9893
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
First patch to split cpu_arch SoC-code away from board code.
Added usage of arch_cpu_init() which is the corresponding
to board_init().
Moved db8500 code from board/st/u8500/u8500.c to
cpu/arm_cortexa9/db8500/cpu.c.
Also created include/asm/arch-db8500/cpu.h and
include/asm/arch-db8500/prcmu.h.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: I403d7d4f6c655c0d383afb3cb3be7e7df96683a3
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7150
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Tested-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
The CR has been integrated and is no longer needed.
ST-Ericsson ID: 277554
ST-Ericsson FOSS-OUT ID: NA
Change-Id: Iea3c5293e52a1c0e90b72f5ec9f25e03539a4b43
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/10327
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Ulrika SJOBERG <ulrika.malmborg@stericsson.com>
|
|
Fixed compiler warnings in common/cmd_spi.c.
ST-Ericsson ID: 269867
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I78b973ca5e1e5ae5de8058abff897ff2cf545574
Signed-off-by: Markus Helgesson <markus.helgesson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9520
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Add -Wall -Wextra -Werror to CFLAGS for db8500 SoC code.
Also add -Wno-unused-parameter due to some inline functions in generic
include files are having unused parameters.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: Ibc59c6e4ad1188e96d7c65d600881869b7024ce8
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9891
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Started work with splitting the files in board/st/u8500 into
proper SoC (system on a chip), drivers, commands and board code.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: I33300b1990f377bc049785102f1c87fbe579e86d
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7089
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
|
|
The u-boot spec-file is prepared for customized MeeGo products. The idea
is to add new spec files with the main spec as template, changing the
necessary configuration. From OBS perspective, a new linkpac should be
created with the same name as the spec file (hence triggering build of
the variant).
ST-Ericsson ID: AP280926
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie51a3c2ecbcd5b71aefa988efa5bc3758079093f
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9338
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Oscar EKBLADH <oscar.ekbladh@stericsson.com>
Reviewed-by: Olle TRANK <olle.trank@stericsson.com>
Reviewed-by: Robert MARKLUND <robert.marklund@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
clock.c is SoC specific, not board specific.
Other db8500 based boards need it as well, therefore move it into
the SoC directory.
Change-Id: Ib23d44988628e8bb6a8cb89c56941cf2a815892d
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9399
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
|
|
prcmu.c is SoC specific, not board specific.
Other db8500 based boards need it as well, therefore move it into
the SoC directory.
Change-Id: Ic40e474700fb737dbbb8ce7ea6c88ea1b89d2f20
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9371
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
|
|
Even when the configuration had not really changed U-boot would be rebuilt
due to that the configuration files were updated unnecessarily. This change
prevents the configuration file to be updated as long as the config stays
the same, and this in turn prevents buildling U-boot. This applies to STE
Ux500 board configuration.
ST-Ericsson ID: AP280716
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Iacc39eee65d57578b6cbfcfc1dc8217b31a9c76f
Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9228
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Some defines were inherited from the old U-Boot 1.3.1 and are not used
anywhere. This patch removes them.
As a side-effect the flash.c dummy was also removed.
Change-Id: Iecddb2f8bb59d909b936254085c358a1d246d205
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9203
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
|
|
The ste-rgb565.bin is now added to the RPM as splash.bin
ST-Ericsson ID: ER280657
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I124c1b61dc8cba90ab968c7fa549465cef0fdb6e
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9195
Tested-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
common.h and gpio.h were present in the u8500 board directory and in the
SoC include directory include/asm-arch/arch-stw8500.
This patch removes the duplicates in the board directory and replaces
all "common.h" and "gpio.h" with <asm/arch/common.h> and
<asm/arch/gpio.h>, respectively.
Change-Id: I4ff2a3a11324200222e3ae5b9d22eee6427f6d4c
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8838
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Rikard OLSSON <rikard.p.olsson@stericsson.com>
|
|
Added necessary files to build u-boot for MeeGo.
ST-Ericsson ID: CR271125
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10009
Change-Id: Id8cc3680fc3c35f82b4889aa0f259fabac6d41ca
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8343
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
Reviewed-by: Mario BOIKOV <mario.boikov@stericsson.com>
|
|
ST-Ericsson ID: ER280045
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Change-Id: Iac299906a34917a914a8ee27dde2592c3b7a19bf
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8776
Tested-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Fixed: Dereferencing possibly NULL "mmc" in call to function "mmc_init"
ST-Ericsson ID: 273353
Change-Id: Ie75546c9e26b638d7cd7fe122a1180418b48df14
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8367
Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
|
|
To get numbers for 5500 machines and official SVP8500 numbers.
ST-Ericsson ID: ER280045
mach-types are equivalent to the following patch:
ST-Ericsson ID: AP279856
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Change-Id: I0ce5ce2c31cc3e35fadd01acc20f077992be2f0d
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8775
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Code adapted from uClibc-0.9.30.3
Originated from U-Boot mainline git://git.denx.de/u-boot.git
commit 54c6977e9ca41fb38b45f1746d90f2806be3b5cb
Original committer Wolfgang Denk <wd@denx.de>
Change-Id: I85a11005af9eaed50d94674fdac74a32f7bc4f35
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8439
Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
Tested-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
|
|
This patch removes splash image from u-boot binary and loads it from a toc entry
called SPLASH instead.
Depends-On: I2e182df7fa056a5df2deb05a4ebab844eedbb85d
I715045aba01c1c747f9bd15f02c6d057f66ff968
I93e63a092fd6f229f530e55ec4b98e8e09db1c06
ST-Ericsson ID: ER268766
Change-Id: I4ee7885618d18d526dfca55d7c45b769cd9b52c9
Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6879
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Rikard OLSSON <rikard.p.olsson@stericsson.com>
|
|
Moved enabling of clocks into i2c driver, making it possible to use all i2c
from 0 to 3.
Changed sanity check of i2c_read function to make it possible read from
devices with 2 byte address.
ST-Ericsson ID: CR275232
Change-Id: I6c9c2efe20dcb6903419ba531a86228a5f4491ca
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8340
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
This fixes a coverity issue in itp.c.
ST-Ericsson ID: ER273353
Change-Id: Ifbe265567169a57d6dec940ef7593e601b9953e8
Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8284
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
|
|
Fixes sd card init that did not initialize ddr_en.
This made sd fail init when previous contents in ddr_en was not 0.
Change-Id: I5f2f33efdeb2e6af9e984805442ee0aa4285abdd
Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8231
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Tested-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
|
|
ST-Ericsson ID: ER268766
Change-Id: Ib09f8b2107e7ba09efd7ff4dec6a22949d56d5ff
Signed-off-by: Rikard Olsson <rikard.p.olsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7905
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
|
|
Use TOC functionality instead of hardcoded environment addresses to make
it easier to move the U-boot environment configuration to other
locations in the flash memory.
ST-Ericsson ID: 270847
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10009
Change-Id: If70d56587d47afdc60a2e50e85d0de13cdf556cc
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7761
Reviewed-by: Simon SJOLANDER <simon.sjolander@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Patrik RYD <patrik.ryd@stericsson.com>
Reviewed-by: Mikael GULLBERG <mikael.xx.gullberg@stericsson.com>
Tested-by: Patrik RYD <patrik.ryd@stericsson.com>
|
|
Buffer used to read configuration file was increased in size.
ST-Ericsson: 270847
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4c9a24d63e1842034e06aa8758808a43da191477
Signed-off-by: Mikael Gullberg <mikael.xx.gullberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7806
Reviewed-by: Rickard EVERTSSON <rickard.evertsson@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
|