Age | Commit message (Collapse) | Author |
|
Erronrous root= parameter causes "Kernel panic - not syncing: No init found"
After applying this patch Snowball boots successfully to a shell again.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This is to address the following bug:
https://bugs.launchpad.net/igloocommunity/+bug/934034
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Optimizing for size with gcc 4.6.x prevents uboot from reaching the cmd
line. Removing this optimization solves the problem.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
This is fixing bug:
https://bugs.launchpad.net/igloocommunity/+bug/925913
Signed-off-by: Benn Porscke <benn.porscke@stericsson.com>
Committer: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
If a boot.scr file exist in a fat partition on the emmc it will be used.
|
|
It delays the boot for all, although useful only for those using network
based filesystems as rootfs.
|
|
The ethernet controller reportedly suffers data corruption of transfers from
SRAM through the Flexible Smart Memory Controller on some PDK boards.
Increasing the data-phase timing for the transfers fixes these problems.
|
|
cpu/arm_cortex_a9/db8500/sec_bridge.c file)
|
|
|
|
Files fetched by 'fat load' must use absolute path, otherwize the
command fails.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
flexible. Confining the change to snowball.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Conflicts:
board/st/u8500/u8500.c
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
|
|
|
|
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
- Initial pin configuration.
- Introduction of u8500_is_snowball.
- Introduction of new machine type.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
This patch will enable MCDECLK but not change the clocksource.
ST-Ericsson ID: ER 323824
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2d67a80ee24513251f6456cc7586530fb9a11b6e
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/15040
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Marcel TUNNISSEN <marcel.tuennissen@stericsson.com>
|
|
MCDE: Sub TOC entry not found
toc_load_toc_entry: get_entry_info_toc failed
mcde_display_image: no splash image found.
ready
The splash code searches for the SPLASH entry. If it is not found in the
normal TOC, the TOC code in disk/part_toc.c tries the sub TOC entries.
The sub TOC code then issues the "Sub TOC entry not found" message.
It should be up to the caller to interpret it as error and to print an
appropriate error message.
Therefore this patch change it into a debug() message.
Change-Id: Ie2f566b0f7b8f4ff6a950ec05743b573c58626e7
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/14828
Reviewed-by: QATOOLS
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
|
|
.git2obs passes version to setlocalversion to get correct git version,
i.e. from latest real u-boot tag and not the in-house repo tags.
ST-Ericsson ID: None
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I1ea64bbd70cb929fc5ddccf2ddff3161d370094a
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/14579
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Previously the setlocalversion script checked if the git had untagged
commits since the latest tag. If one wants to set extra tags as
checkpoints, other than the official releases, then this will give
incorrect version.
This patch introduce a second optional parameter to setlocalversion, for
specifying a git tag to look for. The Makefile specifies the u-boot version
and passes it to the script. The script will then look for untagged commits
since the "u-boot version"-tag.
ST-Ericsson ID: None
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7315f4d38d6b74b78e118b36aac271859658ff67
Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/14578
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Fixed coverity and compiler warning in drivers/spi/u8500_spi.c.
Also removed a variable which is no longer needed after the
GPIO-handling was removed from the driver.
ST-Ericsson ID: None
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Iea067014c2c2ea4bd4367eccbe1cde36c69e01da
Signed-off-by: Markus Helgesson <markus.helgesson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13763
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
|
|
This patch changes the display initialization to only activate the
display related clocks that are actually needed for the selected
display mode, DSI or DPI. It also removes two compile time warnings.
ST-Ericsson ID: CR 321311
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I5ae07bd06ae02c2e7c1a0f7860b251f35a953e99
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13587
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com>
|
|
db8500 v2.1 has a new ASIC ID. Add it to the function table.
Without this patch and with CONFIG_ITP_LOAD, U-Boot will hang on a
db8500 v2.1
Change-Id: I819663e698aa6667f5831575db87ded2c9f0c5c2
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/14476
Reviewed-by: QATOOLS
Reviewed-by: Jens WIKLANDER <jens.wiklander@stericsson.com>
Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Reviewed-by: Martin HOVANG <martin.xm.hovang@stericsson.com>
|
|
With newer PRCMU FW (2.0.6), clearing of the Ack mailbox interrupt is
enforced.
This patch clears the Ack mailbox interrupt.
ST-Ericsson ID: ER 322248
Change-Id: I38c7af5a375230c22b61db6cc46283c01ff39727
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/14201
Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Ulf MORLAND <ulf.morland@stericsson.com>
Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
Tested-by: Jonas SKARSTAM <jonas.skarstam@stericsson.com>
|
|
ST-Ericsson ID: -
Change-Id: Ia578aac003204392564a74860966a959ad82117b
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13917
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
ST-Ericsson ID: 321908
Change-Id: Ib51c36558e37c7f52db638052644758e6d3cc51a
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13848
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
This code was added by ST-Ericsson to the mainline code.
Remove it, since its whole purpose was for debugging/testing.
Furthermore Coverity found 4 defects in it.
ST-Ericsson ID: ER 273353
Change-Id: I9e23f399a68c88bc250b280c3bc418da7217f8d3
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13292
Reviewed-by: QATOOLS
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
|
|
The HREFP 2.0 V60 has no GPIO expander and the display reset IO line
was moved to an ordinary GPIO line.
Furthermore move the board dependent routine out from the mcde driver
into u8500.c
ST-Ericsson ID: CR 272893
Change-Id: If1362cecaeb183e67273066f759e220672f4537f
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13480
Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
|
|
Verification of the kernel and ITP signature before allowing to boot is
added. This feature is configurable and by default not activated. MeeGo-
built RPM will have this enabled.
ST-Ericsson ID: WP275634, ER275440
Change-Id: Ib888f39dd5dca1bc8b7d6e1b002da83a77908b07
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11415
Tested-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Jens WIKLANDER <jens.wiklander@stericsson.com>
|
|
Place output from u-boot build in directory specified by
Android product configuration.
ST-Ericsson ID: 277228
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ibc93d0e305400d2d3064b3bbdda993fd13909227
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9858
Reviewed-by: QATOOLS
Tested-by: Axel FAGERSTEDT <axel.fagerstedt@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
This adds the correct calculation for high capacity mmc.
ST-Ericsson ID: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4a6b152d02f22d4abba790177fcfb200ba853192
Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13312
Reviewed-by: QATOOLS
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
The cut-off voltage for AB8500 is set too high in the OTP.
To be able to start with a charger from a drained battery,
we have to lower this threshold before the backlight and
display is started.
ST-Ericsson ID: ER320113
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ia5c8c5b749fa9cb9cf8a15072ddfe5b0d1f33f5f
Signed-off-by: Johan Palsson <johan.palsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13028
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Removes enable interrupts for mcde mistakenly inherited from the kernel
code. Furthermore three printfs has been changed to debug.
ST-Ericsson ID: ER320412
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ifd68404ecf36b040166b900cd51f6d503e4d2ef6
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/12876
Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
Reviewed-by: Anders BAUER <anders.bauer@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
The HREFP 2.0 V60 has no GPIO expander, therefore some GPIO lines
were moved around.
The preferred approach was to first check if there is a machid in the
environment. And if not try to program the GPIOE. If that fails, assume
it is a V60 or newer.
But for the splash screen, we need to know very early on which HW
version we are running. At that time no environment is available,
therefore it is unavoidable to do the I2C access (10 ms timeout), if
both HW versions shall be supported in one binary.
CAUTION: you need also a Linux kernel which supports MACH_TYPE_HREFV60.
Older U8500 kernels will not even issue a start-up message.
Depends-On: http://gerrit.lud.stericsson.com/gerrit/12335
ST-Ericsson ID: CR 272893
Change-Id: Id794df8c185dfbf67f7bce81deb49abf71129f7b
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/12578
Reviewed-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
|