summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-08ppc/85xx: Add a simple function to search the TLBKumar Gala
Allow us to search the TLB array based on an address. This is useful if we want to change an entry but dont know where it happens to be located. For example, the boot page mapping we use on MP or the flash TLB that we change the WIMGE settings for after we've relocated. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-0885xx: Add support for setting IVORs to fixed offset defaultsKumar Gala
In future Book-E implementations IVORs will most likely go away and be replaced with fixed offsets. The IVPR will continue to exist to allow for relocation of the interrupt vectors. This code adds support to setup the IVORs as their fixed offset values per the ISA 2.06 spec when we transition from u-boot to another OS either via 'bootm' or a cpu release. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08ppc/85xx: Fix up eSDHC controller clock frequency in the device treeDipen Dudhat
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08ppc/8xxx: Remove ddr_pd_cntl register since it doesn't existKumar Gala
The ddr_pd_cntl isn't defined in any reference manual and thus we wil remove especially since we set it to 0, which would most likely be its POR value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08ppc/8xxx: relocate cpu pointer in global dataKumar Gala
Now that we have a pointer to the cpu struct we need to relocate it once we get into ram. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08fsl: sys_eeprom: Fix 'may be used uninitialized' warningAnton Vorontsov
The warning is bogus, so silence it by initializing the 'ret' variable. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clkDipen Dudhat
Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a platform define. This will enable all the 85xx platforms to use sdhc_clk based on CONFIG_FSL_ESDHC. Signed-off-by: Gao Guanhua <B22826@freescale.com> Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-07Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk
2009-09-07Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2009-09-06fsl_i2c: increase I2C timeout values and make them configurableTimur Tabi
The value of I2C_TIMEOUT in fsl_i2c.c has several problems. First, it is defined as CONFIG_HZ/4, but it is used as a count of microseconds, so it makes no sense to derive it from a clock rate. Second, the current value (250) is too low for some boards, so it needs to be increased. Third, the timeout necessary for multiple-master arbitration is larger than the timeout for basic read/write operations, so we shouldn't have a single constant for both timeouts. Finally, it would be nice if we could override these values on a per-board basis. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Wolfgang Denk <wd@denx.de> Tested-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-06Reset i2c slave devices during init on mpc5xxx cpusEric Millbrandt
Reset any i2c devices that may have been interrupted during a system reset. Normally this would be accomplished by clocking the line until SCL and SDA are released and then sending a start condtiion (From an Atmel datasheet). There is no direct access to the i2c pins so instead create start commands through the i2c interface. Send a start command then delay for the SDA Hold time, repeat this by disabling/enabling the bus a total of 9 times. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
2009-09-05ARM: DaVinci: Adding Support for DaVinci DM365 EVMSandeep Paulraj
This patch adds support for the DM365 EVM. It has been tested on a DM365 EVM. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-09-05ARM: DaVinci: DaVinci DM365 SOC specific codeSandeep Paulraj
This patch adds support for DaVinci DM365 SOC. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-09-05DM9000 init for pm9261Ilko Iliev
Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2009-09-05Add support for the DevKit8000 boardFrederik Kriewitz
This patch adds support for the DevKit8000 board. Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>
2009-09-05omap3: move the other boards to board/Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-09-05arm: move Logicpd's boards to board/logicpd/Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-09-05omap: move TI's boards to board/ti/Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-09-04ARM: Update mach-typesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-04push LOAD_ADDR out to arch mk filesMike Frysinger
Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in the standalone Makefile, push the setting up of LOAD_ADDR out to the arch config.mk (and rename to STANDALONE_LOAD_ADDR in the process). This keeps the common code clean and lets the arch do whatever crazy crap it wants in its own area. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-04zlib: fix code when DEBUG is definedGiuseppe CONDORELLI
Removed stdio.h inclusion and moved trace macros to use printf avoiding to write debug informations to standard error. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
2009-09-04mxc_nand: Remove Freescale's "All Rights Reserved."Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-09-04mpc83xx/serdes: License cleanup: remove "All Rights Reserved" noticeAnton Vorontsov
"All Rights Reserved" conflicts with the GPL. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04License cleanup: remove unintended "All Rights Reserved" notices.Wolfgang Denk
Some files included my old standerd file header which had a "All Rights Reserved" part. As this has never been my intention, I remove these lines to make the files compatible with GPL v.2 and later. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-04cmd_mtdparts.c: fix compiler warning in debug codeWolfgang Denk
Fix warning messages: cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long unsigned int', but argument 6 has type 'u32' cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long unsigned int', but argument 7 has type 'u32' Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-04Move uninitialized_var() macro from ubi_uboot.h to compiler.hAnton Vorontsov
This is needed so that we could use this macro for non-UBI code. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04arm: Remove -fno-strict-aliasingKumar Gala
-fno-strict-aliasing is hidding warnings. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-04ppc: Remove -fno-strict-aliasingKumar Gala
-fno-strict-aliasing is hidding warnings. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-04galaxy5200: Add chip select region for an Epson S1D15313Eric Millbrandt
Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
2009-09-04Add ability for arch code to make changes before we bootKumar Gala
Added a arch_preboot_os() function that cpu specific code can implement to allow for various modifications to the state of the machine right before we boot. This can be useful to setup register state to a specific configuration. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-04Use different PBA value for E1000 PCI and PCIe cardsRoy Zang
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: André Schwarz <andre.schwarz@matrix-vision.de>
2009-09-04Add PCI support to eNET boardGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04i386: Moved PCI from #ifdef to conditional compile for sc520 boardsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structureGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Misc sc520 cdp fixupsGraeme Russ
Now that the PCI, SATA et al compile problems have been resolved, the cludge that was applied to avoid them can be removed Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Fixup sc520_spunk boardGraeme Russ
Primary intent is to resolve build errors for this board which has been neglected for a very long time. I do not have one of these boards, so I cannot test functionality Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Misc ds1722 fixupsGraeme Russ
This patch is based on a patch submitted by Jean-Christophe PLAGNIOL-VILLARD on 18th May 2008 as part of a general i386 / sc520 fixup which was never applied Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Misc ti_pci1410a fixupsGraeme Russ
Removed do_pinit() - now declared in cmd_pcmcia.c Added #define CONFIG_CMD_PCMCIA around pcmcia_off() in line with other PCMCIA drivers signed/unsigned type fixups Added semi-colon after default: label as required by newer gcc The only board that appears to use this driver is the sc520_spunk which is very old and very likely very broken anyway. I do not have one to test whether this patch breaks anything functionaly, I have can only check that it compiles without warning or error Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Misc SATA fixupsGraeme Russ
Cast first parameter to sata_cpy() In /drivers/block/ata_piix.h, ata_id_has_lba48(), ata_id_has_lba(), ata_id_has_dma(), ata_id_u32(), ata_id_u64() are all defined in include/libata.h which is included in ata.h which is included by all files which include ata_piix.h (only ata_piix.c) so these definitions are supurflous to (and conlict with) this in libata.h. Interestingly, my compiler complains about ata_id_u64 already being defined, but not ata_id_u32 ata_dump_id() is defined in include/libata.h and should not be static (maybe should even use ata_dump_id() in libata.c Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04i386: Misc PCI fixupsGraeme Russ
Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in commit ff4e66e93c1a, regressed by commit 6d7f610b09f8) Cast PCI_ROM_ADDRESS_MASK to u32 Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO Change call to pci_find_class() to pci_find_devices(). This is based on a patch submitted on 1st March 2007 (Patch that fixes the compilation errors for sc520_cdp board) by mushtaq_k This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be specified in the board config file. Dummy values have been added for the SC520 CDP board to enable compilation, but since I do not have one of these, I do know what the values should be Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Fix sc520 timer interrupt generationGraeme Russ
The current implementation has the timer being started before the interrupt handler is installed. It the interrupt occurs before the handler is installed, the timer interrupt is never reset and the timer stops Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Fix environment configuration for eNET boardGraeme Russ
The current configuration of the Environment has the redundant copy of the environment in the Boot Flash - This was never the intent. The Environment should instead be in the first two sectors of the first Strata Flash Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04i386: Fix regression introduced by commit 8c63d47651f7Graeme Russ
A local variable was deleted that should not have been Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04i386: Change inline asm global symbols to localGraeme Russ
gcc 4.3.2 optimiser creates multiple copies of inline asm (who knows why) Remove use of global names for labels to prevent 'symbol already defined' errors Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04i386: Add errno.hGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04Consolidate arch-specific mem_malloc_init() implementationsPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04Standardize mem_malloc_init() implementationPeter Tyser
This lays the groundwork to allow architectures to share a common mem_malloc_init(). Note that the x86 implementation was not modified as it did not fit the mold of all other architectures. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04Consolidate arch-specific sbrk() implementationsPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04atmel_df_pow2: standalone to convert dataflashes to pow2Mike Frysinger
Atmel DataFlashes by default operate with pages that are slightly bigger than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 bytes). However, they also have a "power of 2" mode where the pages show up with the normal binary size. The latter mode is required in order to boot with a Blackfin processor, so many people wish to convert their DataFlashes on their development systems to this mode. This standalone application does just that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02Blackfin: cm-bf548: fix device->stdio_dev falloutMike Frysinger
The recent 52cb4d4fb348 commit which renamed device to stdio_dev missed the cm-bf548's video board. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-01 03:16:21 +0000