summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-21Move api_examples to examples/apiPeter Tyser
Also add a rule to remove demo.bin which was previously leftover after a "make clean" Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-2183xx, kmeter: fix compile errorHeiko Schocher
CONFIG_SYS_MALLOC_LEN is defined in the board config, and the keymile-common.h, which collects common options used by all keymile-boards. This results in a compile error when compiling the kmeter1 board. So remove this define in the board config file. Signed-off-by: Heiko Schocher <hs@denx.de>
2009-07-21Move examples/ to examples/standalonePeter Tyser
The current files in examples are all standalone application examples, so put them in their own subdirectory for organizational purposes Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-21Move architecture specific config.mk files into subdirsPeter Tyser
This cleans up U-Boot's toplevel directory a bit and makes the architecture 'config.mk' file naming and location similar to board and cpu 'config.mk' files Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-21Add "tags" to .gitignore file.Po-Yu Chuang
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-21powerpc: updates for the keymile boardsHeiko Schocher
- CONFIG_SYS_MAX_I2C_BUS changed to 1 We use only one I2C hardwarecontroller on this boards, so change the CONFIG_SYS_MAX_I2C_BUS to 1. - common: dont print errormsg if second IVM Block lacks. - 82xx, mgcoge: fix double mtdpart entry in environment - 82xx, mgcoge: activate on second Flash the second bank. - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards - common: Change malloc size to 1MByte for all Keymile boards We need a bigger malloc area for the environment support (128k) on some Keymile boards (kmeter1) and the upcoming UBI support. Change it to 1MB for all Keymile boards to be on the save side. Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for UBI/UBIFS support. - Add UBI support to all Keymile boards - change manner of writing "/localbus/ranges" node instead of writting the complete "/localbus/ranges" node before booting Linux, only update the ranges entries which gets dynamical detected (size of flashes). This is needed, because keymile adds in the DTS "/localbus/ranges" node entries, which u-boot must not overwrite/delete. - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips The Intel P30 chip has 2 non-identical chips on one die, so we need to define 2 seperate regions that are scanned by physmap_of independantly. - kmeter1: Add MTD concat support to Keymile boards - 82xx, mgcoge: add "unlock=yes" to default environment - added CONFIG_MTD_DEVICE to get in sync with mainline code Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-20fsl_sata: Fix compiler warnings shown by gcc-4.4galak
Update fsl_sata to use common structures instead of casting back and forth between the fsl specific ones and the common ones (which are identical). fsl_sata.c: In function 'scan_sata': fsl_sata.c:550: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:549: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:548: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:545: note: initialized from here fsl_sata.c:592: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:590: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:588: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:586: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:579: warning: dereferencing pointer 'cfis' does break strict-aliasing rules ... Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-20Add unaligned.h for armSimon Kagstrom
This patch adds unaligned.h for ARM (needed to build with LZO compression). The file is taken from the linux kernel, but includes u-boot headers instead. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: Stefan Roese <sr@denx.de>
2009-07-20Remove last remanants of unused CONFIG_I2C_CMD_TREEPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-20ubi: help message correctionAndrzej Wolski
Fix incorrect information about size units and correct typo. Signed-off-by: Andrzej Wolski <awolski@poczta.fm> Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-20Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2009-07-20Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2009-07-19mmc: set bus width to 1 and clock to minimum early during initializationIlya Yanok
We need to switch back to 1-bit before initialization or SD 2.0 cards will fail to send SCR if we've switched to 4-bit already. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-07-19config.mk: Remove unused HPATHShinya Kuribayashi
This variable is not unused anywhere. Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2009-07-19digsy mtc: Enable command line history.Grzegorz Bernacki
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-07-19compiler.h: unify system ifdef cruft hereMike Frysinger
Shove a lot of the HOSTCC and related #ifdef checking crap into the new compiler.h header so that we can keep all other headers nice and clean. Also introduce custom uswap functions so we don't have to rely on the non standard implementations that a host may (or may not in the case of OS X) provide. This allows mkimage to finally build cleanly on an OS X system. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-19common: fix 'dummy' is used uninitialized in this function warningKim Phillips
fix this gcc 4.4 warning: xyzModem.c: In function 'xyzModem_stream_open': xyzModem.c:564: warning: 'dummy' is used uninitialized in this function Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-19push CROSS_COMPILE out to $(ARCH)_config.mkMike Frysinger
Each arch should handle setting a proper default CROSS_COMPILE value in their own config.mk file rather than having to maintain a large ugly list in the Makefile. By using conditional assignment, we don't have to worry about the variable already being set (env/cmdline/etc...). The common config.mk file takes care of exporting CROSS_COMPILE already, and while a few variables (toolchain ones) utilize CROSS_COMPILE before including the arch config.mk, they do so with deferred assignment. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-19malloc.h: protect it against multiple includeJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-19Fix boards broken after removal of legacy NAND and DoC supportWolfgang Denk
Commit 2419169f removed support for legacy NAND and disk on chip but missed to update the code for a few boards. This patch fixes the resulting build issues. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19cmd_flash.c: fix fix compile error for boards with DataFlashWolfgang Denk
Commit 5669ed45 ("cmd_flash.c: fix warning: unused variable 'addr_first'/'addr_last'") changed the #ifdef logic areound the declaration of these variables and missed a combination of settings of HAS_DATAFLASH with SYS_NO_FLASH; this patch fixes this. Also spotted by Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19pcm030: fix out-of-tree buildingWolfgang Denk
Commit 0a87dd90 that was supposed to fix out-of-tree building for the pcm030 board was unfortunately incomplete. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19Canyonlands SATA harddisk driverKazuaki Ichinohe
This patch adds a SATA harddisk driver for the canyonlands. This patch is kernel driver's porting. This patch corresponded to not cmd_scsi but cmd_sata. This patch divided an unused member with ifndef __U_BOOT__ in the structure. [environment variable, boot script] setenv bootargs root=/dev/sda7 rw setenv bootargs ${bootargs} console=ttyS0,115200 ext2load sata 0:2 0x400000 /canyonlands/uImage ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb fdt addr 0x800000 0x4000 bootm 0x400000 - 0x800000 If you drive SATA-2 disk on Canyonlands, you must change parts from PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using following disks: 1.Vendor: Fujitsu Type: MHW2040BS 2.Vendor: Fujitsu Type: MHW2060BK 3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT 4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required) 5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required) 6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required) 7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required) 8.Vendor: Transcend Type: TS32GSSD25S-M 9.Vendor: MTRON Type: MSD-SATA1525-016 Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
2009-07-19Add support for the Tundra TSI148 VME-bridgeReinhard Arlt
From: Reinhard Arlt <reinhard.arlt@esd-electronics.com> This patch adds support for the Tundra TSI148 VME-bridge. It's used on the upcoming esd VME8349 board. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-18Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDRMike Frysinger
MAC addresses should not be hardcoded in boards to avoid random link level conflicts. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18Blackfin: bf533-stamp: back down SCLK a bitMike Frysinger
While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with the shortened SDRAM traces. So lower the SCLK speed down to a value that all three can handle. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18Blackfin: split cpu COBJS into multilinesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18Blackfin: add os log functionsMike Frysinger
Part of the mini Blackfin ABI with operating systems is that they can use 0x4f0-0x4f8 to pass log buffers to/from bootloaders. So add support to U-Boot for reading the log buffer. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCIKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-19PATI board: fix compiler warningsWolfgang Denk
Fix these: pati.c: In function 'checkboard': pati.c:358: warning: pointer targets in passing argument 2 of 'getenv_r' differ in signedness ../common/flash.c: In function 'write_word': ../common/flash.c:824: warning: dereferencing type-punned pointer will break strict-aliasing rules cmd_pati.c: In function 'do_pati': cmd_pati.c:279: warning: 'value' may be used uninitialized in this function Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19mpl: printing current stdio devices cleanupJean-Christophe PLAGNIOL-VILLARD
Currently the mpl boards duplicate the code to print the current devices from common/console.c; use stdio_print_current_devices() instead Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19console: unify printing current devicesJean-Christophe PLAGNIOL-VILLARD
Create stdio_print_current_devices() for this purpose Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-19Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2009-07-18cmd_flash.c: fix warning: unused variable 'addr_first'/'addr_last'Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18OMAP3 Fix compiler warning for v7_flush_dcache_allTom Rix
On build of omap3 targets in MAKEALL, the *.ERR files have cpu.c: In function 'cleanup_before_linux': cpu.c:64: warning: implicit declaration of function 'v7_flush_dcache_all' cpu.c:64: warning: implicit declaration of function 'get_device_type The functions v7_flush_dcache_all and get_device_type are declared in include/asm-arm/arch-omap3/sys_proto.h, so use this file to declare the functions. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-07-18ARM: make split_by_variant.sh output more usefulWolfgang Denk
The board/armltd/integrator/split_by_variant.sh script used to print "Configuring for integrator*p board..." no matter which board name was being compiled. This made it difficult to match MAKEALL output to board names. This patch fixes this. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...Wolfgang Denk
Commit 8d2effea added a warning for configurations that use NAND without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but failed to fix the affected boards. This patch covers the non-PPC boards that were missed in the previous patch (commit 170c1972). Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18at91cap9adk: fix #ifdef/#endif pairingWolfgang Denk
The #ifdef/#endif pairing in this file was obviously messed up. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18pcm030: fix out-of-tree buildingWolfgang Denk
Commit c9969947, which added support for the pcm030 board (aka phyCORE-MPC5200B-tiny), broke out-of-tree building. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18MPC837XERDB: fix warning: "CONFIG_SYS_MONITOR_LEN" redefinedWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-188xxx: fix warning: implicit declaration of function 'uec_standard_init'Wolfgang Denk
Commit 8e55258f created function uec_standard_init() to initialize all UEC interfaces for 83xx and 85xx but failed to provide a prototype for it. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18MIP405T: fix compile problemWolfgang Denk
The "stdio/device: rework function naming convention" patch (commit 52cb4d4f) broke the MIP405T board; this patch fixes it. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...Wolfgang Denk
Commit 8d2effea added a warning for configurations that use NAND without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but failed to fix the affected boards. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18CPCI750: fix compile problemWolfgang Denk
Commit bc0d3296 removed ppc_error_no.h from Marvell boards but forgot to update board/esd/cpci750/mv_eth.h Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2009-07-18Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk
2009-07-18cmd_i2c: bugfix: add missing braceAlessandro Rubini
The sub-command parser missed a brace, so "return 0;" is always taken and no error message is diplayed if you say "i2c scan" instead of "i2c probe", for example. Proper brace is added. Also, a misleading and unneeded else is removed. Signed-off-by: Alessandro Rubini <rubini@gnudd.com.it>
2009-07-18stdio/device: rework function naming conventionJean-Christophe PLAGNIOL-VILLARD
So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-17ppc: Fix compile error for boards with CONFIG_DDR_ECCPeter Tyser
A bug was introduced by commit e94e460c6e8741f42dab6d8dd4b596ba5d9d79ae which affected non-MPC83xx/85xx/86xx ppc boards which had CONFIG_DDR_ECC defined and resulted in errors such as: Configuring for canyonlands board... fsl_dma.c:50:2: error: #error "Freescale DMA engine not supported on your processor" make[1]: *** No rule to make target `.depend', needed by `libdma.a'. Stop. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-17include/config_cmd_default.h cleanupPrafulla Wadaskar
arranged configurations in alphabetical order CONFIG_CMD_FLASH moved under ifndef CONFIG_SYS_NO_FLASH Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 00:24:15 +0000