summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-24img2srec: use standard typesMike Frysinger
The img2srec code creates a lot of typedefs with common names. These easily clash with system headers that include these typedefs (like mingw). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-24tools: gitignore *.exe binariesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-24ppc: Move conditional compilation of kgdb.c to MakefilePeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-11-24spi_flash.h: pull in linux/types.h for u## typesMike Frysinger
2009-11-24bootm: mark local boot_os[] table staticMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-24mkconfig: deny messed up ARCH definitionNishanth Menon
Refuse to setup a platform if the command line ARCH= is not the same as the one required for the board. This prevents any user with prehistoric aliases from messing up their builds. Reported in thread: http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html Inputs from: Mike Frysinger and Wolfgang Denk: http://lists.denx.de/pipermail/u-boot/2009-November/063642.html Cc: Wolfgang Denk <wd@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2009-11-24Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2009-11-24Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk
2009-11-24Repair the 'netretry=once' option.Remy Bohmer
'netretry = once' does the same as 'netretry = yes', because it is not stored when it was tried once. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-24Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=yRemy Bohmer
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-11-24OMAP3: pandora: fix booting without serial attachedGrazvydas Ignotas
When the board is booted without serial cable attached (which is how most of them will be used) UART RX is left floating and sometimes picks noise, which interrupts countdown and enters U-Boot prompt instead of booting the kernel. Fix this by setting up internal pullup on UART RX pin. This does not prevent serial from working as the internal pullup is weak. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
2009-11-23Add support for CS2 dataflash for Atmel-SPI.Remy Bohmer
The only missing chipselect line support is CS2, and I need it on CS2... Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-11-23Fix mingw tools buildRemy Bohmer
mkimage does not build due to missing strtok_r() and getline() implementation Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-11-23Building of FIT images does not work.Remy Bohmer
The type is not set for generation of the FIT images, resulting in no images being created without printing or returning an error Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-11-22sf: fix stmicro offset setup while erasingMike Frysinger
Reported-by: Peter Gombos <gombos@protecta.hu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-22sf: new driver for Winbond W25X16/32/64 devicesJason McMullan
Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-22mpc8260: move FDT memory node fixup into common CPU code.Marcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> Tested-by: Heiko Schocher <hs@denx.de>
2009-11-22Add driver for FTRTC010 real time clockPo-Yu Chuang
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-11-22MIMC200: set default fbmem valueMark Jackson
This patch adds a default bootargs "fbmem" value to the CONFIG_BOOTARGS string for the MIMC200 board. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
2009-11-17ppc4xx: Initialize magnetic coupler on VOM405 boardsMatthias Fuchs
This patch fixes an ugly behavior of the IL712 magnetic coupler as used on VOM405. These parts will remember their last state over a power cycle which might cause unwanted behavior. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-17ppc4xx: Initialize magnetic couplers in PLU405Matthias Fuchs
This patch fixes an ugly behavior of the IL712 magnetic couplers as used on PLU405. These parts will remember their last state over a power cycle which might cause unwanted behavior. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-17Add minimal SJA1000 header for basic CAN modeMatthias Fuchs
This patch is in preparation for the upcoming PLU405 board fix. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-15Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2009-11-15Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2009-11-15Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk
2009-11-13ppc/85xx: Fix how we determine the number of CAM entriesKumar Gala
We were incorrectly use the max CAM size as the number of entries in the array for setting up the addrmap. We should be using the NENTRY field which is the low 12-bits of TLB1CFG. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-12smc911x: make smc911x_initialize return correct valueMike Rapoport
Make smc911x_initialize return -1 on error and number of interfaces detected otherwise. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-12smc911x_eeprom: fix building after smc911x overhaulMike Frysinger
When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was missed. The config option needed updating as well as overhauling of the rergister read/write functions. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-12fsl-ddr: Fix the chip-select interleaving issueDave Liu
commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3 introduced one new bug to chip-select interleaving. Single DDR controller also can do the chip-select interleaving if there is dual-rank or qual-rank DIMMs. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2009-11-11Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2009-11-11mxc_fec: avoid free() calls to already freed pointers.javier Martin
Sometimes, inside NetLoop, eth_halt() is called before eth_init() has been called. This is harmless except for free() calls to pointers which have not been allocated yet. This patch initializes those pointers to NULL and allocates them only the first time. This way we can get rid of free calls in halt callback. This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-11mxc_fec: fix some erroneous PHY accesses.javier Martin
This patch fixes erroneous access to the ethernet PHY which broke the driver. 1. Selector field in the auto-negotiation register must be 0x00001 for using 802.3, not 0x00000 which is reseved. 2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not 0x0 fixed address. This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains. Now using proper defines for auto-negotiation register. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-11ARM Don't inline weak symbolsRon Lee
------------------------------------------------------------------------ GCC 4.4 complains about this now. Signed-off-by: Ron Lee <ron@debian.org>
2009-11-09Fix SMC91111 regression: lpd7a40x build failuresBen Warren
Both lpd7a400 and lpd7a404 failed to compile because they had CONFIG_SMC_USE_IOFUNCS defined: examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw' Also removed an orphaned paren in lpd7a404.h Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-09SMC91111: Clean up SMC_inx macros on xsengine and xaeniaxBen Warren
This patch fixes the following warnings: Configuring for xaeniax board... smc91111_eeprom.c: In function 'print_macaddr': smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of & smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of & ... Configuring for xsengine board... smc91111_eeprom.c: In function 'print_macaddr': smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-09Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk
2009-11-09Fix CS8900 regression on impa7 boardBen Warren
The following error was seen on impa7 board, due to its use of a 32-bit bus on CS8900. cs8900.c:137:37: error: macro "get_reg_init_bus" passed 2 arguments, but takes just 1 This patch gives the macro the correct number of arguments Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-09clarify eth driver halt/recv stepsMike Frysinger
The dev->halt() func can be called at any time, and the dev->recv() func does not need to use NetRxPackets[] when calling NetReceive(). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-09Fix cs8900 dev->priv not init issueHui.Tang
Ensure all CS8900 data structures are assigned before accessing device Signed-off-by: Hui.Tang <zetalabs@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-09ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES)Stefan Roese
This error only appears when DEBUG is enabled in this driver. That's why it went unnoticed till now. Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-09ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)Stefan Roese
This patch fixes a problem only seen very occasionally on Canyonlands. The NOR flash interface (CFI driver) doesn't work reliably in all cases. Erasing and/or programming sometimes doesn't work. Sometimes with an error message, like "flash not erased" when trying to program an area that should have just been erased. And sometimes without any error messages. As mentioned above, this problem was only seen rarely and with some PLL configuration (CPU speed, EBC speed). Now I spotted this problem a few times, when running my Canyonlands with the following setup (chip_config): 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100 Changing the EBC configuration to not release the bus into high impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1 in EBC0_CFG) seems to fix this problem. I haven't seen any failure anymore with this patch applied. Signed-off-by: Stefan Roese <sr@denx.de> Cc: David Mitchell <dmitchell@amcc.com> Cc: Jeff Mann <MannJ@embeddedplanet.com>
2009-11-07ARM: Use Linux version for unaligned access codeRemy Bohmer
The asm-arm/unaligned.h includes linux/unaligned/access_ok.h This file is unsafe to be used on ARM, since it does an unaligned memory accesses which fails on ARM. Lookin at Linux the basic difference seems to be the header "include/asm-arm/unaligned.h". The Linux version of "unaligned.h" does *not* include "access_ok.h" at all. It includes "le_byteshift.h" and "be_byteshift.h" instead. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Stefan Roese <sr@denx.de> -- include/asm-arm/unaligned.h | 3 - include/linux/unaligned/be_byteshift.h | 70 +++++++++++++++++++++++++++++++++ include/linux/unaligned/le_byteshift.h | 70 +++++++++++++++++++++++++++++++++ 3 files changed, 142 insertions(+), 1 deletion(-) create mode 100644 include/linux/unaligned/be_byteshift.h create mode 100644 include/linux/unaligned/le_byteshift.h
2009-11-04ppc/85xx: Fix inclusion of 83xx immap in 85xx buildsKumar Gala
The nand_boot_fsl_elbc.c is shared between 83xx & 85xx however we should not be including the immap_83xx.h when building 85xx. We can just get this all from common.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-0486xx: Remove redundant code in initdramBecky Bruce
The same code exists both inside an #ifdef and outside of it. Remove the extra code for all the 86xx boards. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-04fsl_pci_init_port end-point initialization is brokenEd Swarthout
commit 70ed869e broke fsl pcie end-point initialization. Returning 0 is not correct. The function must return the first free bus number for the next controller. fsl_pci_init() must still be called and a bus allocated even if the controller is an end-point. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-04Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"Kumar Gala
This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc. There isn't any need to modify the API for fsl_pci_init_port to pass the status of host/agent(end-point) status. We can determine that internally to fsl_pci_init_port. Revert the patch that makes the API change. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-31ppc/85xx: Fix misc L2 cache enabling bugDave Liu
We need loop-check the flash clear lock and enable bit for L2 cache. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-31Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2009-10-30sh: Update lowlevel_init.S of espt-gigaNobuhiro Iwamatsu
There was the point that did not use write macro. Change to write macro. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-27 07:27:22 +0000