summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2010-01-05mpc85xx: Add 4-bits eSDHC support for MPC8569E-MDS boardsAnton Vorontsov
Thanks to "Errata to MPC8569E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 0" document, which describes all eSDHC pins, we can add 4-bits eSDHC support for MPC8569E-MDS boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc/85xx: Remove CONFIG_SYS_DDR_TLB_STARTKumar Gala
Now that we dynamically determine TLB CAM entries to use we dont need CONFIG_SYS_DDR_TLB_START anymore. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05ppc/85xx: Clean up ATUM8548 PCI setup codeKumar Gala
Use new fsl_pci_init_port() that reduces amount of duplicated code in the board ports, use IO accessors and clean up printing of status info. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-03Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2009-12-22ppc4xx: alpr: Remove some not needed commands to make image fit againStefan Roese
The latest changes increased the size of the alpr image a bit more. Now it doesn't fit into the 256k reserved for it. This patch now removes the commands "ping" and "diag" which are not needed in the production systems. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
2009-12-21Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
2009-12-20omap3evm: musb: add USB configAjay Kumar Gupta
Added USB host and device config for host (MSC, Keyboard) and device (ACM) functionalities. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2009-12-20OMAP3 zoom2 Use usbtty if the debug board is not connected.Tom Rix
The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20OMAP3 beagle Add usbtty configurationTom Rix
The primary console of beagle is the serial header. A secondary console is to use the usbtty. The user can set this manually by doing setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty saveenv usbtty will be usable by accessing the /dev/ttyACM0 on a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20OMAP3 zoom1 Add usbtty configurationTom Rix
The primary console of zoom1 is the serial out from the jumpers accessed by removing the back panel. A secondary console is to use the usbtty. The user can set this manually by doing setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty saveenv usbtty will be usable by accessing the /dev/ttyACM0 on a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-17Merge branch 'next' of git://git.denx.de/u-boot-netWolfgang Denk
2009-12-15Merge branch 'next' of ../nextWolfgang Denk
2009-12-14Net: Clean up LAN91C96 SupportBen Warren
A previous Commit converted the LAN91C96 Ethernet driver to using the CONFIG_NET_MULTI API, but did not include full board support. This patch finishes the job. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-12-14MVBLUE: Remove CONFIG_CMD_IRQPeter Tyser
Neither the MVBLUE nor its underlying architecture implement the do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined. This change fixes the following MVBLUE compiler error: -> ./MAKEALL MVBLUE Configuring for MVBLUE board... common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo' make: *** [u-boot] Error 1 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2009-12-14imx27lite: Reenable MTD support on NOR flash.Detlev Zundel
The support for this was silently dropped by a configuration split during the merge of the imx27lite board support in commit 864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common handling of FLASH devices via MTD layer). Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-12-13LAN91C96: Enable NET_MULTI LAN driverNishanth Menon
This modification is NOT tested on any of the platforms modified as I dont have them. please help by testing+building+fixing Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-12-13TI OMAP3: SDP3430 FIX NET_MULTI WarningNishanth Menon
Enable the NET MULTI option and remove build warning Tested: SDP3430 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-12-08common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOULHeiko Schocher
There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08microblaze: Stop stack clobbering in microblaze-generic.Graeme Smecher
A typo caused the stack and malloc regions to overlap, which prevented mem_malloc_init() from returning. This commit makes the memory layout match the example described in include/configs/microblaze-generic.h Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-07mpc52xx, manroland: add some commandsHeiko Schocher
add the following commands for the manroland boards: CONFIG_CMDLINE_EDITING CONFIG_COMMAND_HISTORY CONFIG_AUTO_COMPLETE Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-05Merge branch 'master' into nextWolfgang Denk
Conflicts: board/esd/plu405/plu405.c drivers/rtc/ftrtc010.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-05i386: Final RelocationGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-05i386: Fix global label in inline asm compile errorGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-05i386: Fix malloc initializationGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-0285xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config filesBecky Bruce
A bunch of the 85xx boards have this cruft in them - it's not used anywhere. Delete it. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-12-01Merge branch 'next-sync' of git://git.denx.de/u-boot-arm into nextWolfgang Denk
2009-11-27NAND: Add config option for imx27liteSandeep Paulraj
We will get compilation warnings without "CONFIG_SYS_64BIT_VSPRINTF" being defined in the board config. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-11-27arm: A320: Add support for Faraday A320 evaluation boardPo-Yu Chuang
This patch adds support for A320 evaluation board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2009-11-27OMAP3:SDRC: introduce DDR typesNishanth Menon
Micron DDR timings based on: http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-omap3.git;a=blob;f=include/asm/arch-omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d4017316d86;hb=HEAD Introduce Micron DDR timings and provide CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config options to allow for platform files to setup their timings as per the type of DDR selected Reported-by: Steve Sakoman in http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page=y Signed-off-by: Nishanth Menon <nm@ti.com>
2009-11-27TI DA8xx: Integrate DA830 EVM support into U-BootSekhar Nori
Integrate DA830 EVM support into U-Boot. Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/ Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-27Add a unified s3c24x0 header filekevin.morfitt@fearnside-systems.co.uk
This patch adds a unified s3c24x0 cpu header file that selects the header file for the specific s3c24x0 cpu from the SOC and CPU configs defined in board config file. This removes the current chain of s3c24-type #ifdef's from the s3c24x0 code. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-27S3C6400/SMDK6400: fix stack_setup in start.SSeunghyeon Rhee
Fix stack_setup to place the stack on the correct address in DRAM accroding to U-Boot standard and remove conditional compilation by CONFIG_MEMORY_UPPER_CODE macro that is not necessry. This macro was introduced and used only by this board for some unclear reason. The definition of this macro is also removed because it's not referenced elsewhere. Signed-off-by: Seunghyeon Rhee <seunghyeon@lpmtec.com> Tested-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-25ppc4xx: Remove autoupdate feature from PLU405 boardMatthias Fuchs
The autoupdate feature is not used on PLU405 boards. So remove it. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-22MIMC200: set default fbmem valueMark Jackson
This patch adds a default bootargs "fbmem" value to the CONFIG_BOOTARGS string for the MIMC200 board. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
2009-11-19ppc4xx: Remove unused features from PMC440 board supportMatthias Fuchs
This patch shrinks the PMC440 u-boot binary (from next branch) to fit into 384kB again. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-19ppc4xx: alpr: Remove some not needed commands to make image fit againStefan Roese
The latest changes in the u-boot/next branch increased the size of the alpr image a bit more. Now it doesn't fit into the 256k reserved for it. This patch now removes the commands "askenv" and "irq" which are not needed in the production systems. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
2009-11-19ppc4xx: Consolidate pci_pre_init() functionStefan Roese
This patch removes the duplicted implementations of the pci_pre_init() function by introducing a weak default function for it. This weak default has a different implementation for some PPC variants. It can be overridden by a board specific version. Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-19ppc4xx: Consolidate pci_target_init() functionStefan Roese
This patch removes the duplicted implementations of the pci_target_init() function by introducing a weak default function for it. This weak default has a different implementation for 440EP(x)/GR(x) PPC's. It can be overridden by a board specific version (e.g. PMC440, korat). Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
2009-11-17ppc4xx: Initialize magnetic couplers in PLU405Matthias Fuchs
This patch fixes an ugly behavior of the IL712 magnetic couplers as used on PLU405. These parts will remember their last state over a power cycle which might cause unwanted behavior. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-15Merge branch 'master' into nextWolfgang Denk
2009-11-13ENV Variable support for Flex-OneNANDAmul Kumar Saha
Define and use CONFIG_ENV_ADDR_FLEX and CONFIG_ENV_SIZE_FLEX for storing environment variables. Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com> Signed-off-by: Amul Kumar Saha <amul.saha@samsung.com>
2009-11-11Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2009-11-10ppc4xx: Katmai: Add chip_config commandStefan Roese
This patch removes the Katmai "bootstrap" command and replaces it with the now common command "chip_config". Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-10ppc4xx: Add UBI support to PLU405 boardsMatthias Fuchs
-add UBI support -increase malloc'able memory size -cleanup MONITOR|FLASH_BASE|LEN constants Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-09Fix SMC91111 regression: lpd7a40x build failuresBen Warren
Both lpd7a400 and lpd7a404 failed to compile because they had CONFIG_SMC_USE_IOFUNCS defined: examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw' Also removed an orphaned paren in lpd7a404.h Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-11-09ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)Stefan Roese
This patch fixes a problem only seen very occasionally on Canyonlands. The NOR flash interface (CFI driver) doesn't work reliably in all cases. Erasing and/or programming sometimes doesn't work. Sometimes with an error message, like "flash not erased" when trying to program an area that should have just been erased. And sometimes without any error messages. As mentioned above, this problem was only seen rarely and with some PLL configuration (CPU speed, EBC speed). Now I spotted this problem a few times, when running my Canyonlands with the following setup (chip_config): 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100 Changing the EBC configuration to not release the bus into high impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1 in EBC0_CFG) seems to fix this problem. I haven't seen any failure anymore with this patch applied. Signed-off-by: Stefan Roese <sr@denx.de> Cc: David Mitchell <dmitchell@amcc.com> Cc: Jeff Mann <MannJ@embeddedplanet.com>
2009-11-09ppc4xx: Consolidate 4xx PCIe board specific configurationStefan Roese
This patch consolidates the PPC4xx board specific PCIe configuration code. This way the duplicated code is removed. Boards can implement a special, non standard behaviour (e.g. number of PCIe slots, etc) by overriding the weak default functions. Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-02ppc4xx: sc3: Remove unreferenced external declarations from sc3.hStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2009-10-31mpc52xx: add support for the IPEK01 boardWolfgang Grandegger
This patch adds support for the board IPEK01 based on the MPC5200. The Futjitsu Lime graphics controller is configured in 16 bpp mode. Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2009-10-31video: mb862xx: add option VIDEO_FB_16BPP_WORD_SWAP for IPEK01Wolfgang Grandegger
In 16 bpp mode, the new IPEK01 board only requires swapping of D16 words for D32 accesses due to the diffferent connecting to the GDC bus. This patch introduces the configuration option VIDEO_FB_16BPP_WORD_SWAP, which should be set for all board using the mb862xx in 16 bpp mode. For the IPEK01, VIDEO_FB_16BPP_PIXEL_SWAP should not be set. Signed-off-by: Wolfgang Grandegger <wg@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 06:14:02 +0000