summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2009-12-20USBTTY make some function declarations easier to use.Tom Rix
Zoom2 needs to use these declarations and the include directory is a better place from them than in the middle of the driver directory. It did not make sense to create a new file for just a couple of lines so they were appended to the serial.h Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20OMAP3 beagle Add usbtty configurationTom Rix
The primary console of beagle is the serial header. A secondary console is to use the usbtty. The user can set this manually by doing setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty saveenv usbtty will be usable by accessing the /dev/ttyACM0 on a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20OMAP3 zoom1 Add usbtty configurationTom Rix
The primary console of zoom1 is the serial out from the jumpers accessed by removing the back panel. A secondary console is to use the usbtty. The user can set this manually by doing setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty saveenv usbtty will be usable by accessing the /dev/ttyACM0 on a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20OMAP3 Add usb device supportTom Rix
This change adds the usb device support for musb. Omap3 platform support added at the same level as davinci. The interface for usbtty to use the musb device support was added. Verified on omap3 beagle, zoom1 and zoom2. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20TWL4030 Add usb PHY supportTom Rix
The twl4030 provides a PHY device for connecting a link device, like musb, to physical connection. This change adds the twl4030 usb registers and functions for initializing the PHY as required by omap3. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20USB add macros for debugging usb device setup.Tom Rix
When developing usb device features, it is useful to print out common usb structures. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20USB Consolidate descriptor definitionsTom Rix
The header files usb.h and usbdescriptors.h have the same nameed structure definitions for usb_config_descriptor usb_interface_descriptor usb_endpoint_descriptor usb_device_descriptor usb_string_descriptor These are out right duplicates in usb.h usb_device_descriptor usb_string_descriptor This one has extra unused elements usb_endpoint_descriptor unsigned char bRefresh unsigned char bSynchAddress; These in usb.h have extra elements at the end of the usb 2.0 specified descriptor and are used. usb_config_descriptor usb_interface_descriptor The change is to consolidate the definition of the descriptors to usbdescriptors.h. The dublicates in usb.h are removed. The extra element structure will have their name shorted by removing the '_descriptor' suffix. So usb_config_descriptor -> usb_config usb_interface_descriptor -> usb_interface For these, the common descriptor elements are accessed now by an element 'desc'. As an example - if (iface->bInterfaceClass != USB_CLASS_HUB) + if (iface->desc.bInterfaceClass != USB_CLASS_HUB) This has been compile tested on MAKEALL arm, ppc and mips. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-15Merge branch 'next' of ../nextWolfgang Denk
2009-12-14MVBLUE: Remove CONFIG_CMD_IRQPeter Tyser
Neither the MVBLUE nor its underlying architecture implement the do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined. This change fixes the following MVBLUE compiler error: -> ./MAKEALL MVBLUE Configuring for MVBLUE board... common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo' make: *** [u-boot] Error 1 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2009-12-14imx27lite: Reenable MTD support on NOR flash.Detlev Zundel
The support for this was silently dropped by a configuration split during the merge of the imx27lite board support in commit 864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common handling of FLASH devices via MTD layer). Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-12-08common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOULHeiko Schocher
There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08microblaze: Correct ffs regression for MicroblazeMichal Simek
We are using generic implementation of ffs. This should be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00 Here is warning message which this patch removes. In file included from /tmp/u-boot-microblaze/include/common.h:38, from cmd_mtdparts.c:87: /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110, from /tmp/u-boot-microblaze/include/common.h:38, from cmd_mtdparts.c:87: /tmp/u-boot-microblaze/include/asm/bitops.h:269:1: warning: this is the location of the previous definition Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-08microblaze: Stop stack clobbering in microblaze-generic.Graeme Smecher
A typo caused the stack and malloc regions to overlap, which prevented mem_malloc_init() from returning. This commit makes the memory layout match the example described in include/configs/microblaze-generic.h Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-07mpc52xx, manroland: add some commandsHeiko Schocher
add the following commands for the manroland boards: CONFIG_CMDLINE_EDITING CONFIG_COMMAND_HISTORY CONFIG_AUTO_COMPLETE Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-05Merge branch 'master' into nextWolfgang Denk
Conflicts: board/esd/plu405/plu405.c drivers/rtc/ftrtc010.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-05add lzop decompression supportPeter Korsgaard
Add lzop decompression support to the existing lzo bitstream handling (think gzip versus zlib), and support it for uImage decompression if CONFIG_LZO is enabled. Lzop doesn't compress as good as gzip (~10% worse), but decompression is very fast (~0.7s faster here on a slow ppc). The lzop decompression code is based on Albin Tonnerre's recent ARM Linux lzo support patch. Cc: albin.tonnerre@free-electrons.com Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-05Generic udelay() with watchdog supportIngo van Lil
According to the PPC reference implementation the udelay() function is responsible for resetting the watchdog timer as frequently as needed. Most other architectures do not meet that requirement, so long-running operations might result in a watchdog reset. This patch adds a generic udelay() function which takes care of resetting the watchdog before calling an architecture-specific __udelay(). Signed-off-by: Ingo van Lil <inguin@gmx.de>
2009-12-05i386: Final RelocationGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-05i386: Move references to link script exportsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-05i386: Rearrange Interupt HandlingGraeme Russ
In preperation for full relocation Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-05i386: Fix global label in inline asm compile errorGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-05i386: Fix malloc initializationGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-0285xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config filesBecky Bruce
A bunch of the 85xx boards have this cruft in them - it's not used anywhere. Delete it. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-12-01Merge branch 'next-sync' of git://git.denx.de/u-boot-arm into nextWolfgang Denk
2009-11-29ARM Update mach-typesTom Rix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 3fcca9ac6cbce35b3e81e247d375534117d5f4cd Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-11-27NAND: Add config option for imx27liteSandeep Paulraj
We will get compilation warnings without "CONFIG_SYS_64BIT_VSPRINTF" being defined in the board config. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-11-27arm: A320: Add support for Faraday A320 evaluation boardPo-Yu Chuang
This patch adds support for A320 evaluation board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2009-11-27OMAP3: Fix SDRC initNishanth Menon
Defaults are for Infineon DDR timings. Since none of the supported boards currently do XIP boot, these seem to be faulty. fix the values as per the calculations(ACTIMA,B), conf the sdrc power with pwdnen and wakeupproc bits Signed-off-by: Nishanth Menon <nm@ti.com>
2009-11-27OMAP3:SDRC: introduce DDR typesNishanth Menon
Micron DDR timings based on: http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-omap3.git;a=blob;f=include/asm/arch-omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d4017316d86;hb=HEAD Introduce Micron DDR timings and provide CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config options to allow for platform files to setup their timings as per the type of DDR selected Reported-by: Steve Sakoman in http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page=y Signed-off-by: Nishanth Menon <nm@ti.com>
2009-11-27OMAP3:SDRC: Cleanup references to SDPNishanth Menon
Remove SDP referenced unused defines Signed-off-by: Nishanth Menon <nm@ti.com>
2009-11-27TI DA8xx: Integrate DA830 EVM support into U-BootSekhar Nori
Integrate DA830 EVM support into U-Boot. Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/ Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-27Add TI DA8xx support: DA8xx includesNick Thompson
Provides initial support for TI OMAP-L1x/DA8xx SoC devices. See http://www.ti.com The DA8xx devices are similar to DaVinci devices but have a differing memory map and updated peripheral versions. Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2009-11-27Add a unified s3c24x0 header filekevin.morfitt@fearnside-systems.co.uk
This patch adds a unified s3c24x0 cpu header file that selects the header file for the specific s3c24x0 cpu from the SOC and CPU configs defined in board config file. This removes the current chain of s3c24-type #ifdef's from the s3c24x0 code. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-27S3C6400/SMDK6400: fix stack_setup in start.SSeunghyeon Rhee
Fix stack_setup to place the stack on the correct address in DRAM accroding to U-Boot standard and remove conditional compilation by CONFIG_MEMORY_UPPER_CODE macro that is not necessry. This macro was introduced and used only by this board for some unclear reason. The definition of this macro is also removed because it's not referenced elsewhere. Signed-off-by: Seunghyeon Rhee <seunghyeon@lpmtec.com> Tested-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-27Clean-up of s3c24x0 header fileskevin.morfitt@fearnside-systems.co.uk
Cleans up the s3c24x0 header files: s4c24x0.h: removes the use of 'volatile' from the S3C24X0_REG8, S3C24X0_REG16 and S3C24X0_REG32 register typedef's. Registers are always accessed using the IO accessor functions which cast the register address as 'volatile' anyway so it isn't required here. s3c2400.h and s3c2410.h: insert a blank line between the static inline functions Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
2009-11-27s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xxMinkyu Kang
This patch moves the s3c64xx header files from include/ to include/asm-arm/arch-s3c64xx Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-27Move s3c24x0 header files to asm-arm/arch-s3c24x0/kevin.morfitt@fearnside-systems.co.uk
This patch moves the s3c24x0 header files from include/ to include/asm-arm/arch-s3c24x0/. checkpatch.pl showed 2 errors and 3 warnings. The 2 errors were both due to a non-UTF8 character in David M?ller's name: ERROR: Invalid UTF-8, patch and commit message should be encoded in UTF-8 #489: FILE: include/asm-arm/arch-s3c24x0/s3c2410.h:3: + * David M?ller ELSOFT AG Switzerland. d.mueller@elsoft.ch As David's name correctly contains a non-UTF8 character I haven't fixed these errors. The 3 warnings were all because of the use of 'volatile' in s3c24x0.h: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt #673: FILE: include/asm-arm/arch-s3c24x0/s3c24x0.h:35: +typedef volatile u8 S3C24X0_REG8; +typedef volatile u16 S3C24X0_REG16; +typedef volatile u32 S3C24X0_REG32; I'll fix these errors in another patch. Tested by running MAKEALL for ARM8 targets and ensuring there were no new errors or warnings. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-27ARM Update mach-typesTom Rix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 156171c71a0dc4bce12b4408bb1591f8fe32dc1a Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-11-27ARM Update mach-types.hTom Rix
From http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm Commit id 0996391139f43d032335b5360db11da62a2cbb39 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-11-25ppc4xx: Remove autoupdate feature from PLU405 boardMatthias Fuchs
The autoupdate feature is not used on PLU405 boards. So remove it. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-24spi_flash.h: pull in linux/types.h for u## typesMike Frysinger
2009-11-24Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=yRemy Bohmer
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-11-23ppc4xx: Cleanup PPC4xx I2C infrastructureStefan Roese
This patch cleans up the PPC4xx I2C intrastructure: - Use C struct to describe the I2C registers instead of defines - Coding style cleanup (braces, whitespace, comments, line length) - Extract common code from i2c_read() and i2c_write() - Remove unneeded IIC defines from ppc405.h & ppc440.h Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-22MIMC200: set default fbmem valueMark Jackson
This patch adds a default bootargs "fbmem" value to the CONFIG_BOOTARGS string for the MIMC200 board. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
2009-11-21Merge branch 'next' of git://git.denx.de/u-boot-nand-flash into nextWolfgang Denk
2009-11-21Merge branch 'next' of git://www.denx.de/git/u-boot-ppc4xx into nextWolfgang Denk
2009-11-19ppc4xx: Remove unused features from PMC440 board supportMatthias Fuchs
This patch shrinks the PMC440 u-boot binary (from next branch) to fit into 384kB again. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-19ppc4xx: alpr: Remove some not needed commands to make image fit againStefan Roese
The latest changes in the u-boot/next branch increased the size of the alpr image a bit more. Now it doesn't fit into the 256k reserved for it. This patch now removes the commands "askenv" and "irq" which are not needed in the production systems. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
2009-11-19ppc4xx: Consolidate pci_master_init() functionStefan Roese
This patch removes the duplicted implementations of the pci_master_init() function by introducing a weak default function for it. It can be overridden by a board specific version. Signed-off-by: Stefan Roese <sr@denx.de>
2009-11-19ppc4xx: Consolidate pci_pre_init() functionStefan Roese
This patch removes the duplicted implementations of the pci_pre_init() function by introducing a weak default function for it. This weak default has a different implementation for some PPC variants. It can be overridden by a board specific version. Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 09:44:44 +0000