From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/cogent/README | 8 ++++---- board/cogent/flash.c | 20 ++++++++++---------- board/cogent/lcd.c | 4 ++-- board/cogent/mb.h | 44 ++++++++++++++++++++++---------------------- 4 files changed, 38 insertions(+), 38 deletions(-) (limited to 'board/cogent') diff --git a/board/cogent/README b/board/cogent/README index e6eef662c..31ca187b5 100644 --- a/board/cogent/README +++ b/board/cogent/README @@ -80,16 +80,16 @@ To configure, perform the usual U-Boot configuration task of editing "include/config_cogent_mpc8xx.h" and reviewing all the options and settings in there. In particular, check the chip select values installed into the memory controller's various option and base -registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and -CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed -into the SCCR - via the define CFG_SCCR. Finally, decide whether you +registers - these are set by the defines CONFIG_SYS_CMA_CSn_{BASE,SIZE} and +CONFIG_SYS_{B,O}Rn_PRELIM. Also be careful of the clock settings installed +into the SCCR - via the define CONFIG_SYS_SCCR. Finally, decide whether you want the serial console on motherboard serial port A or on one of the 8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly (NONE means use Cogent motherboard serial port A). Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be the base address of the EPROM for the CPU module. This should be the -same as the value selected for CFG_MONITOR_BASE in +same as the value selected for CONFIG_SYS_MONITOR_BASE in "include/config_cogent_*.h" (in fact, I have made this automatic via the -DTEXT_BASE=... option in CPPFLAGS). diff --git a/board/cogent/flash.c b/board/cogent/flash.c index 942f33ab0..e6c85b6d9 100644 --- a/board/cogent/flash.c +++ b/board/cogent/flash.c @@ -24,11 +24,11 @@ #include #include -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ #if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif # ifndef CONFIG_ENV_SIZE # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE @@ -121,7 +121,7 @@ c302f_probe(flash_info_t *fip, c302f_addr_t base) fip->size += C302F_BNK_SIZE; osc = fip->sector_count; fip->sector_count += C302F_BNK_NBLOCKS; - if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT) + if ((nsc = fip->sector_count) >= CONFIG_SYS_MAX_FLASH_SECT) panic("Too many sectors in flash at address 0x%08lx\n", (unsigned long)base); @@ -264,7 +264,7 @@ c302f_write_word(c302f_addr_t addr, c302f_word_t value) /* data polling for D7 */ start = get_timer (0); do { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { retval = 1; goto done; } @@ -295,7 +295,7 @@ flash_init(void) flash_info_t *fip; /* Init: no FLASHes known */ - for (i=0; isize; fip++; #endif @@ -320,10 +320,10 @@ flash_init(void) * protect monitor and environment sectors */ -#if CFG_MONITOR_BASE == CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE+monitor_flash_len-1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif @@ -472,7 +472,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last) do { now = get_timer(start); - if (now - estart > CFG_FLASH_ERASE_TOUT) { + if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout (sect %d)\n", sect); haderr = 1; break; diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c index 814b4c80a..76f5ad103 100644 --- a/board/cogent/lcd.c +++ b/board/cogent/lcd.c @@ -197,7 +197,7 @@ void lcd_printf(const char *fmt, ...) { va_list args; - char buf[CFG_PBSIZE]; + char buf[CONFIG_SYS_PBSIZE]; va_start(args, fmt); (void)vsprintf(buf, fmt, args); @@ -234,7 +234,7 @@ lcd_heartbeat(void) void board_show_activity (ulong timestamp) { #ifdef CONFIG_STATUS_LED - if ((timestamp % (CFG_HZ / 2) == 0) + if ((timestamp % (CONFIG_SYS_HZ / 2) == 0) lcd_heartbeat (); #endif } diff --git a/board/cogent/mb.h b/board/cogent/mb.h index f6eaf0ac5..b3aba48f7 100644 --- a/board/cogent/mb.h +++ b/board/cogent/mb.h @@ -69,51 +69,51 @@ * 0xA000000-0xDFFFFFF. */ -#define CMA_MB_RAM_BASE (CFG_CMA_MB_BASE+0x0000000) +#define CMA_MB_RAM_BASE (CONFIG_SYS_CMA_MB_BASE+0x0000000) #define CMA_MB_RAM_SIZE 0x2000000 /* dip sws set actual size */ #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT1) -#define CMA_MB_SLOT1_BASE (CFG_CMA_MB_BASE+0x2000000) +#define CMA_MB_SLOT1_BASE (CONFIG_SYS_CMA_MB_BASE+0x2000000) #define CMA_MB_SLOT1_SIZE 0x2000000 #endif #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2) -#define CMA_MB_SLOT2_BASE (CFG_CMA_MB_BASE+0x4000000) +#define CMA_MB_SLOT2_BASE (CONFIG_SYS_CMA_MB_BASE+0x4000000) #define CMA_MB_SLOT2_SIZE 0x2000000 #endif #if (CMA_MB_CAPS & CMA_MB_CAP_PCI) -#define CMA_MB_STDPCI_BASE (CFG_CMA_MB_BASE+0x4000000) +#define CMA_MB_STDPCI_BASE (CONFIG_SYS_CMA_MB_BASE+0x4000000) #define CMA_MB_STDPCI_SIZE 0x1ff0000 -#define CMA_MB_V360EPC_BASE (CFG_CMA_MB_BASE+0x5ff0000) +#define CMA_MB_V360EPC_BASE (CONFIG_SYS_CMA_MB_BASE+0x5ff0000) #define CMA_MB_V360EPC_SIZE 0x10000 #endif #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3) -#define CMA_MB_SLOT3_BASE (CFG_CMA_MB_BASE+0x6000000) +#define CMA_MB_SLOT3_BASE (CONFIG_SYS_CMA_MB_BASE+0x6000000) #define CMA_MB_SLOT3_SIZE 0x2000000 #endif #if (CMA_MB_CAPS & CMA_MB_CAP_PCI_EXT) -#define CMA_MB_EXTPCI_BASE (CFG_CMA_MB_BASE+0xa000000) +#define CMA_MB_EXTPCI_BASE (CONFIG_SYS_CMA_MB_BASE+0xa000000) #define CMA_MB_EXTPCI_SIZE 0x4000000 #endif -#define CMA_MB_ROMLOW_BASE (CFG_CMA_MB_BASE+0xe000000) +#define CMA_MB_ROMLOW_BASE (CONFIG_SYS_CMA_MB_BASE+0xe000000) #define CMA_MB_ROMLOW_SIZE 0x800000 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH) -#define CMA_MB_FLLOW_EXEC_BASE (CFG_CMA_MB_BASE+0xe000000) +#define CMA_MB_FLLOW_EXEC_BASE (CONFIG_SYS_CMA_MB_BASE+0xe000000) #define CMA_MB_FLLOW_EXEC_SIZE 0x100000 -#define CMA_MB_FLLOW_RDWR_BASE (CFG_CMA_MB_BASE+0xe400000) +#define CMA_MB_FLLOW_RDWR_BASE (CONFIG_SYS_CMA_MB_BASE+0xe400000) #define CMA_MB_FLLOW_RDWR_SIZE 0x400000 #endif #if (CMA_MB_CAPS & CMA_MB_CAP_RTC) -#define CMA_MB_RTC_BASE (CFG_CMA_MB_BASE+0xe800000) +#define CMA_MB_RTC_BASE (CONFIG_SYS_CMA_MB_BASE+0xe800000) #define CMA_MB_RTC_SIZE 0x4000 #endif #if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR) -#define CMA_MB_SERPAR_BASE (CFG_CMA_MB_BASE+0xe900000) +#define CMA_MB_SERPAR_BASE (CONFIG_SYS_CMA_MB_BASE+0xe900000) #define CMA_MB_SERIALB_BASE (CMA_MB_SERPAR_BASE+0x00) #define CMA_MB_SERIALA_BASE (CMA_MB_SERPAR_BASE+0x40) #define CMA_MB_PARALLEL_BASE (CMA_MB_SERPAR_BASE+0x80) @@ -121,20 +121,20 @@ #endif #if (CMA_MB_CAPS & CMA_MB_CAP_KBM) -#define CMA_MB_PKBM_BASE (CFG_CMA_MB_BASE+0xe900100) +#define CMA_MB_PKBM_BASE (CONFIG_SYS_CMA_MB_BASE+0xe900100) #define CMA_MB_PKBM_SIZE 0x10 #endif #if (CMA_MB_CAPS & CMA_MB_CAP_LCD) -#define CMA_MB_LCD_BASE (CFG_CMA_MB_BASE+0xeb00000) +#define CMA_MB_LCD_BASE (CONFIG_SYS_CMA_MB_BASE+0xeb00000) #define CMA_MB_LCD_SIZE 0x10 #endif -#define CMA_MB_DIPSW_BASE (CFG_CMA_MB_BASE+0xec00000) +#define CMA_MB_DIPSW_BASE (CONFIG_SYS_CMA_MB_BASE+0xec00000) #define CMA_MB_DIPSW_SIZE 0x10 #if (CMA_MB_CAPS & (CMA_MB_CAP_SLOT1|CMA_MB_CAP_SER2|CMA_MB_CAP_KBM)) -#define CMA_MB_SLOT1CFG_BASE (CFG_CMA_MB_BASE+0xf100000) +#define CMA_MB_SLOT1CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf100000) #if (CMA_MB_CAPS & CMA_MB_CAP_SER2) #define CMA_MB_SER2_BASE (CMA_MB_SLOT1CFG_BASE+0x80) #define CMA_MB_SER2B_BASE (CMA_MB_SER2_BASE+0x00) @@ -152,7 +152,7 @@ #endif #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2) -#define CMA_MB_SLOT2CFG_BASE (CFG_CMA_MB_BASE+0xf200000) +#define CMA_MB_SLOT2CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf200000) #if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT2) #define CMA_MB_S2KBM_BASE (CMA_MB_SLOT2CFG_BASE+0x200) #endif @@ -160,7 +160,7 @@ #endif #if (CMA_MB_CAPS & CMA_MB_CAP_PCI) -#define CMA_MB_PCICTL_BASE (CFG_CMA_MB_BASE+0xf200000) +#define CMA_MB_PCICTL_BASE (CONFIG_SYS_CMA_MB_BASE+0xf200000) #define CMA_MB_PCI_V3CTL_BASE (CMA_MB_PCICTL_BASE+0x100) #define CMA_MB_PCI_IDSEL_BASE (CMA_MB_PCICTL_BASE+0x200) #define CMA_MB_PCI_IMASK_BASE (CMA_MB_PCICTL_BASE+0x300) @@ -171,19 +171,19 @@ #endif #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3) -#define CMA_MB_SLOT3CFG_BASE (CFG_CMA_MB_BASE+0xf300000) +#define CMA_MB_SLOT3CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf300000) #if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT3) #define CMA_MB_S3KBM_BASE (CMA_MB_SLOT3CFG_BASE+0x200) #endif #define CMA_MB_SLOT3CFG_SIZE 0x400 #endif -#define CMA_MB_ROMHIGH_BASE (CFG_CMA_MB_BASE+0xf800000) +#define CMA_MB_ROMHIGH_BASE (CONFIG_SYS_CMA_MB_BASE+0xf800000) #define CMA_MB_ROMHIGH_SIZE 0x800000 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH) -#define CMA_MB_FLHIGH_EXEC_BASE (CFG_CMA_MB_BASE+0xf800000) +#define CMA_MB_FLHIGH_EXEC_BASE (CONFIG_SYS_CMA_MB_BASE+0xf800000) #define CMA_MB_FLHIGH_EXEC_SIZE 0x100000 -#define CMA_MB_FLHIGH_RDWR_BASE (CFG_CMA_MB_BASE+0xfc00000) +#define CMA_MB_FLHIGH_RDWR_BASE (CONFIG_SYS_CMA_MB_BASE+0xfc00000) #define CMA_MB_FLHIGH_RDWR_SIZE 0x400000 #endif -- cgit v1.2.3