From 0f89c54be92773b23d66ac401ba6acb6144100c3 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Sat, 18 Apr 2009 22:34:03 -0500 Subject: i2c: Update references to individual i2c commands The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop, and isdram are no longer available so all references to them have been updated to the new form of "i2c ". Signed-off-by: Peter Tyser --- board/esd/tasreg/tasreg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'board/esd/tasreg/tasreg.c') diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index 760c71d26..9602ee59f 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -231,7 +231,7 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) addr = simple_strtol (argv[1], NULL, 16); - printf("iprobe looping on addr 0x%lx (cntrl-c aborts)...\n", addr); + printf("i2c probe looping on addr 0x%lx (cntrl-c aborts)...\n", addr); for (;;) { i2c_probe(addr); @@ -249,7 +249,7 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( iploop, 2, 1, do_iploop, - "iprobe loop ", + "i2c probe loop ", NULL ); -- cgit v1.2.3 From a89c33db96a1e55319a286dd4c3c05ca64ac6bfd Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 24 May 2009 17:06:54 +0200 Subject: General help message cleanup Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk --- board/BuS/EB+MCF-EV123/EB+MCF-EV123.c | 2 +- board/ads5121/ads5121_diu.c | 2 +- board/amcc/acadia/cmd_acadia.c | 4 +-- board/amcc/canyonlands/bootstrap.c | 4 +-- board/amcc/katmai/cmd_katmai.c | 4 +-- board/amcc/kilauea/cmd_pll.c | 4 +-- board/amcc/luan/luan.c | 4 +-- board/amcc/makalu/cmd_pll.c | 4 +-- board/amcc/sequoia/cmd_sequoia.c | 4 +-- board/amcc/taihu/lcd.c | 16 +++++----- board/amcc/taihu/taihu.c | 8 ++--- board/amcc/taihu/update.c | 4 +-- board/amcc/taishan/lcd.c | 14 ++++----- board/amcc/taishan/showinfo.c | 6 ++-- board/amcc/taishan/update.c | 2 +- board/amcc/yucca/cmd_yucca.c | 2 +- board/amirix/ap1000/ap1000.c | 10 +++--- board/amirix/ap1000/powerspan.c | 2 +- board/barco/barco.c | 6 ++-- board/bc3450/cmd_bc3450.c | 23 +++++++------- board/bf537-stamp/cmd_bf537led.c | 4 +-- board/cm5200/cmd_cm5200.c | 2 +- board/delta/delta.c | 2 +- board/esd/ar405/ar405.c | 13 ++++---- board/esd/cms700/cms700.c | 5 +-- board/esd/common/auto_update.c | 2 +- board/esd/common/cmd_loadpci.c | 4 +-- board/esd/common/lcd.c | 2 +- board/esd/common/xilinx_jtag/micro.c | 2 +- board/esd/cpci2dp/cpci2dp.c | 4 +-- board/esd/cpci405/cpci405.c | 12 +++---- board/esd/cpci5200/cpci5200.c | 4 ++- board/esd/cpci750/cpci750.c | 4 +-- board/esd/dasa_sim/cmd_dasa_sim.c | 2 +- board/esd/du440/du440.c | 33 ++++++++++---------- board/esd/hh405/hh405.c | 5 +-- board/esd/ocrtc/cmd_ocrtc.c | 4 +-- board/esd/pci405/cmd_pci405.c | 2 +- board/esd/pci405/pci405.c | 4 +-- board/esd/pf5200/pf5200.c | 10 +++--- board/esd/plu405/plu405.c | 5 +-- board/esd/pmc440/cmd_pmc440.c | 35 +++++++++++---------- board/esd/tasreg/tasreg.c | 24 +++++++------- board/esd/voh405/voh405.c | 5 +-- board/evb64260/zuma_pbb.c | 4 +-- board/freescale/common/pixis.c | 28 +++++++++-------- board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 4 +-- board/g2000/g2000.c | 6 ++-- board/hymod/bsp.c | 4 +-- board/inka4x0/inkadiag.c | 10 +++--- board/keymile/common/keymile_hdlc_enet.c | 4 +-- board/lwmon/lwmon.c | 6 ++-- board/lwmon5/kbd.c | 2 +- board/lwmon5/lwmon5.c | 2 +- board/micronas/vct/smc_eeprom.c | 6 ++-- board/mpl/mip405/cmd_mip405.c | 2 +- board/mpl/pati/cmd_pati.c | 2 +- board/mpl/pip405/cmd_pip405.c | 2 +- board/mpl/vcma9/cmd_vcma9.c | 2 +- board/pcippc2/pcippc2.c | 2 +- board/pcs440ep/pcs440ep.c | 4 +-- board/pn62/cmd_pn62.c | 6 ++-- board/prodrive/pdnb3/pdnb3.c | 2 +- board/pxa255_idp/pxa_idp.c | 2 +- board/r360mpi/r360mpi.c | 2 +- board/renesas/sh7785lcr/rtl8169_mac.c | 4 +-- board/renesas/sh7785lcr/selfcheck.c | 2 +- board/renesas/sh7785lcr/sh7785lcr.c | 2 +- board/sandburst/common/ppc440gx_i2c.c | 2 +- board/sandburst/karef/karef.c | 4 +-- board/sandburst/metrobox/metrobox.c | 4 +-- board/siemens/common/fpga.c | 2 +- board/siemens/pcu_e/pcu_e.c | 8 ++--- board/ssv/common/cmd_sled.c | 2 +- board/ssv/common/wd_pio.c | 2 +- board/tqc/tqm5200/cmd_stk52xx.c | 13 ++++---- board/tqc/tqm5200/cmd_tb5200.c | 4 +-- board/tqc/tqm8272/tqm8272.c | 2 +- board/trab/cmd_trab.c | 12 +++---- board/trab/trab.c | 2 +- board/trizepsiv/eeprom.c | 3 +- board/w7o/cmd_vpd.c | 2 +- board/zeus/update.c | 2 +- board/zeus/zeus.c | 4 +-- common/cmd_ambapp.c | 7 +++-- common/cmd_bdinfo.c | 2 +- common/cmd_bedbug.c | 16 +++++----- common/cmd_bmp.c | 2 +- common/cmd_boot.c | 4 +-- common/cmd_bootldr.c | 3 +- common/cmd_bootm.c | 10 +++--- common/cmd_cache.c | 4 +-- common/cmd_cplbinfo.c | 4 +-- common/cmd_dataflash_mmc_mux.c | 2 +- common/cmd_date.c | 2 +- common/cmd_dcr.c | 8 ++--- common/cmd_df.c | 2 +- common/cmd_diag.c | 2 +- common/cmd_display.c | 2 +- common/cmd_doc.c | 4 +-- common/cmd_dtt.c | 4 +-- common/cmd_eeprom.c | 4 +-- common/cmd_elf.c | 4 +-- common/cmd_ext2.c | 4 +-- common/cmd_fat.c | 6 ++-- common/cmd_fdc.c | 2 +- common/cmd_fdos.c | 4 +-- common/cmd_fdt.c | 2 +- common/cmd_flash.c | 6 ++-- common/cmd_fpga.c | 5 +-- common/cmd_i2c.c | 5 +-- common/cmd_ide.c | 4 +-- common/cmd_immap.c | 33 ++++++++++---------- common/cmd_irq.c | 3 +- common/cmd_itest.c | 2 +- common/cmd_jffs2.c | 7 ++--- common/cmd_license.c | 5 +-- common/cmd_load.c | 16 +++++----- common/cmd_log.c | 2 +- common/cmd_mac.c | 18 ++--------- common/cmd_mem.c | 37 ++++++++++------------ common/cmd_mfsl.c | 7 ++--- common/cmd_mgdisk.c | 2 +- common/cmd_mii.c | 2 +- common/cmd_misc.c | 4 +-- common/cmd_mmc.c | 11 ++++--- common/cmd_mp.c | 7 +++-- common/cmd_mtdparts.c | 4 +-- common/cmd_nand.c | 45 ++++++++++++++------------- common/cmd_net.c | 12 +++---- common/cmd_nvedit.c | 10 +++--- common/cmd_onenand.c | 2 +- common/cmd_otp.c | 3 +- common/cmd_pci.c | 2 +- common/cmd_pcmcia.c | 4 +-- common/cmd_portio.c | 4 +-- common/cmd_reginfo.c | 1 + common/cmd_reiser.c | 4 +-- common/cmd_sata.c | 3 +- common/cmd_scsi.c | 4 +-- common/cmd_setexpr.c | 2 +- common/cmd_sf.c | 3 +- common/cmd_source.c | 7 +++-- common/cmd_spi.c | 2 +- common/cmd_strings.c | 3 +- common/cmd_ubi.c | 2 +- common/cmd_ubifs.c | 17 +++++----- common/cmd_universe.c | 2 +- common/cmd_usb.c | 6 ++-- common/cmd_vfd.c | 2 +- common/cmd_ximg.c | 11 ++++--- common/cmd_yaffs2.c | 24 +++++++------- common/command.c | 15 +++++---- common/hush.c | 2 +- common/lcd.c | 2 +- cpu/arm_cortexa8/omap3/board.c | 4 +-- cpu/mpc512x/iim.c | 4 +-- cpu/mpc512x/speed.c | 2 +- cpu/mpc83xx/speed.c | 2 +- cpu/nios/asmi.c | 2 +- cpu/nios2/epcs.c | 2 +- cpu/nios2/sysid.c | 2 +- drivers/gpio/pca953x.c | 2 +- drivers/misc/ds4510.c | 8 +++-- drivers/qe/qe.c | 5 +-- 165 files changed, 507 insertions(+), 496 deletions(-) (limited to 'board/esd/tasreg/tasreg.c') diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index 02a095ef8..73dfb3d52 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -156,7 +156,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcimage, 2, 0, do_vcimage, "loads an image to Display", - "vcimage addr\n" + "vcimage addr" ); /* EOF EB+MCF-EV123c */ diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c index 41a135314..1dd60afa4 100644 --- a/board/ads5121/ads5121_diu.c +++ b/board/ads5121/ads5121_diu.c @@ -131,7 +131,7 @@ U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp, "Init or Display BMP file", "init\n - initialize DIU\n" - "addr\n - display bmp at address 'addr'\n" + "addr\n - display bmp at address 'addr'" ); diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c index d47cf1af5..c427f9ebc 100644 --- a/board/amcc/acadia/cmd_acadia.c +++ b/board/amcc/acadia/cmd_acadia.c @@ -97,5 +97,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - " - program the I2C bootstrap EEPROM\n" - ); + " - program the I2C bootstrap EEPROM" +); diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c index 30046fee3..6dc2ccae9 100644 --- a/board/amcc/canyonlands/bootstrap.c +++ b/board/amcc/canyonlands/bootstrap.c @@ -191,5 +191,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - " - strap to boot from NAND or NOR flash\n" - ); + " - strap to boot from NAND or NOR flash" +); diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c index 2c2849b01..335d30c36 100644 --- a/board/amcc/katmai/cmd_katmai.c +++ b/board/amcc/katmai/cmd_katmai.c @@ -214,5 +214,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 1, do_bootstrap, "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap\n" - ); + "wrclk [prom0|prom1] - program the serial device strap" +); diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c index 6b38493e5..9bae67e56 100644 --- a/board/amcc/kilauea/cmd_pll.c +++ b/board/amcc/kilauea/cmd_pll.c @@ -291,7 +291,7 @@ U_BOOT_CMD( RCONF: Read current eeprom configuration. \n\ -----------------------------------------------\n\ WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------\n" - ); + -----------------------------------------------" +); #endif /* CONFIG_CMD_EEPROM */ diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index d2a3b9ec3..7d02d904e 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -331,5 +331,5 @@ U_BOOT_CMD( l2cache, 2, 1, do_l2cache, "enable or disable L2 cache", "[on, off]\n" - " - enable or disable L2 cache\n" - ); + " - enable or disable L2 cache" +); diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c index 6b38493e5..9bae67e56 100644 --- a/board/amcc/makalu/cmd_pll.c +++ b/board/amcc/makalu/cmd_pll.c @@ -291,7 +291,7 @@ U_BOOT_CMD( RCONF: Read current eeprom configuration. \n\ -----------------------------------------------\n\ WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------\n" - ); + -----------------------------------------------" +); #endif /* CONFIG_CMD_EEPROM */ diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index 6dfd8ba38..01dd97c84 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -227,5 +227,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - " - strap to boot from NAND or NOR flash\n" - ); + " - strap to boot from NAND or NOR flash" +); diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c index 6b68f3356..c3dc9837b 100644 --- a/board/amcc/taihu/lcd.c +++ b/board/amcc/taihu/lcd.c @@ -233,25 +233,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", - NULL - ); + "" +); U_BOOT_CMD( lcd_puts, 2, 1, do_lcd_puts, "display string on lcd", - " - to be displayed\n" - ); + " - to be displayed" +); U_BOOT_CMD( lcd_putc, 2, 1, do_lcd_putc, "display char on lcd", - " - to be displayed\n" - ); + " - to be displayed" +); U_BOOT_CMD( lcd_cur, 3, 1, do_lcd_cur, "shift cursor on lcd", " - shift cursor on lcd times, direction is \n" " - 0..31\n" - " - 0=backward 1=forward\n" - ); + " - 0=backward 1=forward" +); diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index 669429b67..d8806ac32 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -94,8 +94,8 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) U_BOOT_CMD ( sw2_stat, 1, 1, do_sw_stat, "show status of switch 2", - NULL - ); + "" +); static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) { @@ -134,8 +134,8 @@ U_BOOT_CMD ( led_ctl, 3, 1, do_led_ctl, "make led 1 or 2 on or off", " - make led on/off,\n" - "\tled_no is 1 or 2\t" - ); + "\tled_no is 1 or 2" +); #define SPI_CS_GPIO0 0 #define SPI_SCLK_GPIO14 14 diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c index 8e969056c..f9c31b392 100644 --- a/board/amcc/taihu/update.c +++ b/board/amcc/taihu/update.c @@ -128,5 +128,5 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[] U_BOOT_CMD ( update_boot_eeprom, 1, 1, update_boot_eeprom, "update boot eeprom content", - NULL - ); + "" +); diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c index e4d070570..d432cc3d0 100644 --- a/board/amcc/taishan/lcd.c +++ b/board/amcc/taishan/lcd.c @@ -254,18 +254,18 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 0; } -U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL); -U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL); +U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", ""); +U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", ""); U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts, "display string on lcd", - " - to be displayed\n"); + " - to be displayed"); U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc, "display char on lcd", - " - to be displayed\n"); + " - to be displayed"); U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur, "shift cursor on lcd", " - shift cursor on lcd times, direction is \n" - " - 0~31\n" " - 0,backward; 1, forward\n"); + " - 0~31\n" " - 0,backward; 1, forward"); #if 0 /* test-only */ void set_phy_loopback_mode(void) @@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(ledon, 1, 1, do_led_test_on, - "led test light on", NULL); + "led test light on", ""); U_BOOT_CMD(ledoff, 1, 1, do_led_test_off, - "led test light off", NULL); + "led test light off", ""); #endif diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c index b471c956e..2a78a22e6 100644 --- a/board/amcc/taishan/showinfo.c +++ b/board/amcc/taishan/showinfo.c @@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info, - "Show PCIX bridge info", NULL); + "Show PCIX bridge info", ""); #define TAISHAN_PCI_DEV_ID0 0x800 #define TAISHAN_PCI_DEV_ID1 0x1000 @@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc, } U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info, - "Show PCIX Device info", NULL); + "Show PCIX Device info", ""); extern void show_reset_reg(void); @@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info, - "Show Reset REG info", NULL); + "Show Reset REG info", ""); diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c index 63f874488..aab3a6577 100644 --- a/board/amcc/taishan/update.c +++ b/board/amcc/taishan/update.c @@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom, - "update bootstrap eeprom content", NULL); + "update bootstrap eeprom content", ""); #endif diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c index d2ca2572d..ed6daa389 100644 --- a/board/amcc/yucca/cmd_yucca.c +++ b/board/amcc/yucca/cmd_yucca.c @@ -282,5 +282,5 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, U_BOOT_CMD( evb440spe, 3, 1, do_evb440spe, "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap\n" + "wrclk [prom0|prom1] - program the serial device strap" ); diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c index fcf26984f..cadfe0b5b 100644 --- a/board/amirix/ap1000/ap1000.c +++ b/board/amirix/ap1000/ap1000.c @@ -670,14 +670,14 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor, " - Set config options.\n" "\n" "All values can be decimal or hex (hex preceded with 0x).\n" - "Only whole numbers are supported for external limits.\n"); + "Only whole numbers are supported for external limits."); #if 0 U_BOOT_CMD (loadace, 2, 0, do_loadace, "load fpga configuration from System ACE compact flash", "N\n" " - Load configuration N (0-7) from System ACE compact flash\n" - "loadace\n" " - loads default configuration\n"); + "loadace\n" " - loads default configuration"); #endif U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, @@ -685,19 +685,19 @@ U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, "N [ADDRESS]\n" " - set software configuration byte to N, optionally use ADDRESS as\n" " location of buffer for flash copy\n" - "swconfig\n" " - display software configuration byte\n"); + "swconfig\n" " - display software configuration byte"); U_BOOT_CMD (pause, 2, 0, do_pause, "sleep processor until any key is pressed with poll time of N seconds", "N\n" " - sleep processor until any key is pressed with poll time of N seconds\n" "pause\n" - " - sleep processor until any key is pressed with poll time of 1 second\n"); + " - sleep processor until any key is pressed with poll time of 1 second"); U_BOOT_CMD (swrecon, 1, 0, do_swreconfig, "trigger a board reconfigure to the software selected configuration", "\n" - " - trigger a board reconfigure to the software selected configuration\n"); + " - trigger a board reconfigure to the software selected configuration"); int board_eth_init(bd_t *bis) { diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c index f727061df..28e2bbc47 100644 --- a/board/amirix/ap1000/powerspan.c +++ b/board/amirix/ap1000/powerspan.c @@ -487,7 +487,7 @@ U_BOOT_CMD (eeprom, 4, 0, do_eeprom, " - store contents of eeprom at address ADD\n" "eeprom p ADD\n" " - put data stored at address ADD into the eeprom\n" - "eeprom d\n" " - return eeprom to default contents\n"); + "eeprom d\n" " - return eeprom to default contents"); unsigned int PowerSpanRead (unsigned int theOffset) { diff --git a/board/barco/barco.c b/board/barco/barco.c index a19e1edab..d7a00782b 100644 --- a/board/barco/barco.c +++ b/board/barco/barco.c @@ -307,19 +307,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD ( try_working, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); U_BOOT_CMD ( boot_working, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); U_BOOT_CMD ( boot_default, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); /* * We are not using serial communication, so just provide empty functions diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c index aa46e5812..271ffb1d1 100644 --- a/board/bc3450/cmd_bc3450.c +++ b/board/bc3450/cmd_bc3450.c @@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip, "\n" " - prints the state of the dip switch and/or\n" " external configuration inputs as hex value.\n" - " - \"Config 1\" is the LSB\n"); + " - \"Config 1\" is the LSB"); /* @@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (buz, 2, 1, cmd_buz, "turns buzzer on/off", - "\n" "buz \n" " - turns the buzzer on or off\n"); + "\n" "buz \n" " - turns the buzzer on or off"); #endif /* CONFIG_BC3450_BUZZER */ @@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp, "\n" "fp bl \n" " - turns the CCFL backlight of the display on/off\n" - "fp \n" " - turns the whole display on/off\n" + "fp \n" " - turns the whole display on/off" #ifdef CONFIG_BC3450_CRT + "\n" "fp crt \n" - " - enables/disables the crt output (debug only)\n" + " - enables/disables the crt output (debug only)" #endif /* CONFIG_BC3450_CRT */ ); - /* * temp - DS1620 thermometer */ @@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (temp, 3, 1, cmd_temp, "print current temperature", - "\n" "temp\n" " - print current temperature\n"); + "\n" "temp\n" " - print current temperature"); #ifdef CONFIG_BC3450_CAN /* @@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n" #ifdef CONFIG_BC3450_CAN - "test can\n" - " - connect CAN1 (X8) with CAN2 (X9) for this test\n" + "test can\n" + " - connect CAN1 (X8) with CAN2 (X9) for this test\n" #endif /* CONFIG_BC3450_CAN */ - "test unit-off\n" - " - turns off the BC3450 unit\n" - " WARNING: Unsaved environment variables will be lost!\n"); + "test unit-off\n" + " - turns off the BC3450 unit\n" + " WARNING: Unsaved environment variables will be lost!" +); #endif diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c index e77bb0cb1..e65c4f835 100644 --- a/board/bf537-stamp/cmd_bf537led.c +++ b/board/bf537-stamp/cmd_bf537led.c @@ -33,7 +33,7 @@ "led \n" \ " - Index (0-5) of LED to change, or \"all\"\n" \ " - Must be one of:\n" \ - " on off toggle\n" + " on off toggle" /* Number of LEDs supported by the board */ #define NUMBER_LEDS 6 @@ -191,7 +191,7 @@ void set_led_state(int index, int state) /* Display usage information */ void show_cmd_usage() { - printf("Usage:\n%s", USAGE_LONG); + printf("Usage:\n%s\n", USAGE_LONG); } /* Register information for u-boot to find this command */ diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index f009eede2..cd98ae219 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -443,6 +443,6 @@ U_BOOT_CMD( "fkt rs232 number\n" " - Test RS232 (loopback plug(s) for RS232 required)\n" "fkt usb\n" - " - Test USB communication\n" + " - Test USB communication" ); #endif /* CONFIG_CMD_BSP */ diff --git a/board/delta/delta.c b/board/delta/delta.c index 73e6c3e37..84ff47e53 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -260,7 +260,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); #endif /* DELTA_CHECK_KEYBD */ diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index 14520e11a..9d1b6d264 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -247,9 +247,8 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( digtest, 3, 1, do_digtest, "Test digital in-/output", - NULL - ); - + "" +); #define ERROR_DELTA 256 @@ -341,8 +340,8 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( anatest, 2, 1, do_anatest, "Test analog in-/output", - NULL - ); + "" +); int counter = 0; @@ -408,6 +407,6 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( inctest, 3, 1, do_inctest, "Test incremental encoder inputs", - NULL - ); + "" +); #endif diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index 658a26796..01b12232b 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -189,8 +189,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ /* ------------------------------------------------------------------------- */ diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 8593125ef..33aeb46d2 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -551,6 +551,6 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( autoupd, 1, 1, auto_update, "Automatically update images", - NULL + "" ); #endif /* CONFIG_AUTO_UPDATE */ diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c index c779f793d..47e946f11 100644 --- a/board/esd/common/cmd_loadpci.c +++ b/board/esd/common/cmd_loadpci.c @@ -124,7 +124,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 1, 1, do_loadpci, "Wait for pci bootcmd and boot it", - NULL - ); + "" +); #endif diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index 066df74bf..5c50b4c8d 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -373,5 +373,5 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( esdbmp, 2, 1, do_esdbmp, "display BMP image", - " - display image\n" + " - display image" ); diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c index 37ac0cc4e..414e82135 100644 --- a/board/esd/common/xilinx_jtag/micro.c +++ b/board/esd/common/xilinx_jtag/micro.c @@ -1869,4 +1869,4 @@ U_BOOT_CMD( cpld, 2, 1, do_cpld, "program onboard CPLD", "" - ); +); diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index aba240f17..cd57ed459 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -183,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepwren, 2, 0, do_eep_wren, "Enable / disable / query EEPROM write access", - NULL - ); + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index ccbe245d7..a677c623f 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -690,8 +690,8 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( onewire, 1, 1, do_onewire, "Read 1-write ID", - NULL - ); + "" +); #define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */ #define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */ @@ -751,8 +751,8 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getbpip, 1, 1, do_get_bpip, "Update IP-Address with Backplane IP-Address", - NULL - ); + "" +); /* * Set and print backplane ip... @@ -787,7 +787,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setbpip, 2, 1, do_set_bpip, "Write Backplane IP-Address", - NULL - ); + "" +); #endif /* CONFIG_CPCI405AB */ diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c index b6b50fb46..36fcf7f87 100644 --- a/board/esd/cpci5200/cpci5200.c +++ b/board/esd/cpci5200/cpci5200.c @@ -295,4 +295,6 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(writepci, 3, 1, do_writepci, "Write some data to pcibus", - " \n" " - Write some data to pcibus.\n"); + " \n" + "" +); diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 482663398..258d8b234 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -994,5 +994,5 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( show_config, 1, 1, do_show_config, "Show Marvell strapping register", - "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" - ); + "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)" +); diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c index 0310c47cf..675e5071d 100644 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ b/board/esd/dasa_sim/cmd_dasa_sim.c @@ -230,7 +230,7 @@ U_BOOT_CMD( pci9054, 3, 1, do_pci9054, "PLX PCI9054 EEPROM access", "pci9054 info - print EEPROM values\n" - "pci9054 update - updates EEPROM with default values\n" + "pci9054 update - updates EEPROM with default values" ); /* ------------------------------------------------------------------------- */ diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 45dfa6fd7..0ec519b8d 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -607,8 +607,8 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dcf77, 1, 1, do_dcf77, "Check DCF77 receiver", - NULL - ); + "" +); /* * initialize USB hub via I2C1 @@ -657,8 +657,8 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hubinit, 1, 1, do_hubinit, "Initialize USB hub", - NULL - ); + "" +); #endif /* CONFIG_I2C_MULTI_BUS */ #define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3 @@ -790,8 +790,8 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sbe, 2, 0, do_setup_boot_eeprom, "setup boot eeprom", - NULL - ); + "" +); #if defined(CONFIG_SYS_EEPROM_WREN) /* @@ -863,8 +863,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ static int got_pldirq; @@ -916,8 +917,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( wpi, 1, 1, do_waitpwrirq, "Wait for power change interrupt", - NULL - ); + "" +); /* * initialize DVI panellink transmitter @@ -961,8 +962,8 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dviinit, 1, 1, do_dviinit, "Initialize DVI Panellink transmitter", - NULL - ); + "" +); /* * TODO: 'time' command might be useful for others as well. @@ -1001,8 +1002,8 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( time, CONFIG_SYS_MAXARGS, 1, do_time, "run command and output execution time", - NULL - ); + "" +); extern void video_hw_rectfill ( unsigned int bpp, /* bytes per pixel */ @@ -1051,5 +1052,5 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo, "demo", - NULL - ); + "" +); diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index eab952c56..5ae4c7586 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -769,8 +769,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c index db2c54842..5f3254d25 100644 --- a/board/esd/ocrtc/cmd_ocrtc.c +++ b/board/esd/ocrtc/cmd_ocrtc.c @@ -55,7 +55,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setdevice, 1, 1, do_setdevice, "Set device number on pci adapter boards", - NULL + "" ); @@ -78,7 +78,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getdevice, 1, 1, do_getdevice, "Get device number and set slot env variable", - NULL + "" ); #endif diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c index a0d1f3f0d..1d1461129 100644 --- a/board/esd/pci405/cmd_pci405.c +++ b/board/esd/pci405/cmd_pci405.c @@ -109,6 +109,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 1, 1, do_loadpci, "Wait for pci-image and boot it", - NULL + "" ); #endif diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 8973f9709..56184caa8 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -381,5 +381,5 @@ U_BOOT_CMD( "wpeeprom 1\n" " - enable I2C EEPROM write protection\n" "wpeeprom 0\n" - " - disable I2C EEPROM write protection\n" - ); + " - disable I2C EEPROM write protection" +); diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c index f225f0e19..4e64e83bf 100644 --- a/board/esd/pf5200/pf5200.c +++ b/board/esd/pf5200/pf5200.c @@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return (0); } -U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL); +U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", ""); int phypower(int flag) { @@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(phypower, 2, 2, do_phypower, - "Switch power of ethernet phy", NULL); + "Switch power of ethernet phy", ""); int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { @@ -369,5 +369,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(writepci, 3, 1, do_writepci, - "Write some data to pcibus", - " \n" " - Write some data to pcibus.\n"); + "Write some data to pcibus", + " \n" + "" +); diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index a94604a2f..fdacbf6f6 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -333,6 +333,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 0fbc3dc23..1af431bd7 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -99,8 +99,8 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( waithci, 1, 1, do_waithci, "Wait for host control interrupt", - NULL - ); + "" +); void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) { @@ -266,8 +266,8 @@ U_BOOT_CMD( " - with 'wait' argument: interrupt driven read from all fifos\n" " - with 'read' argument: read current contents from all fifos\n" " - with 'write' argument: write 'data' 'cnt' times to " - "'fifo' or 'address'\n" - ); + "'fifo' or 'address'" +); int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -338,7 +338,7 @@ U_BOOT_CMD( sbe, 4, 0, do_setup_bootstrap_eeprom, "setup bootstrap eeprom", " [ []]" - ); +); #if defined(CONFIG_PRAM) #include @@ -400,8 +400,8 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( painit, 1, 1, do_painit, "prepare PciAccess system", - NULL - ); + "" +); #endif /* CONFIG_PRAM */ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -412,8 +412,8 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( selfreset, 1, 1, do_selfreset, "assert self-reset# signal", - NULL - ); + "" +); int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -449,8 +449,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( resetout, 2, 1, do_resetout, "assert PMC-RESETOUT# signal", - NULL - ); + "" +); int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -481,8 +481,8 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( inta, 2, 1, do_inta, "Assert/Deassert or query INTA# state in non-monarch mode", - NULL - ); + "" +); /* test-only */ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -514,8 +514,8 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pmm, 2, 1, do_pmm, "Setup pmm[1] registers", - " (pciaddr will be aligned to 256MB)\n" - ); + " (pciaddr will be aligned to 256MB)" +); #if defined(CONFIG_SYS_EEPROM_WREN) int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -549,8 +549,9 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return state; } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* CONFIG_CMD_BSP */ diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index 9602ee59f..18444427f 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -250,8 +250,8 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iploop, 2, 1, do_iploop, "i2c probe loop ", - NULL - ); + "" +); /* */ @@ -303,8 +303,8 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( codec, 1, 1, do_codec, "Enable codec", - NULL - ); + "" +); /* */ @@ -336,8 +336,8 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( saa, 5, 1, do_saa, "Write to SAA1064 ", - NULL - ); + "" +); /* */ @@ -375,8 +375,8 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iwrite, 6, 1, do_iwrite, "Write n bytes to I2C-device", - "addr cnt data0 ... datan\n" - ); + "addr cnt data0 ... datan" +); /* */ @@ -407,8 +407,8 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iread, 3, 1, do_iread, "Read from I2C ", - NULL - ); + "" +); /* */ @@ -445,6 +445,6 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ireadl, 2, 1, do_ireadl, "Read-loop from I2C ", - NULL - ); + "" +); #endif diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 96a04b3ff..91275507e 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -392,6 +392,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c index aef9c27e7..cab4fcae1 100644 --- a/board/evb64260/zuma_pbb.c +++ b/board/evb64260/zuma_pbb.c @@ -204,19 +204,17 @@ U_BOOT_CMD( zinit, 1, 0, do_zuma_init_pbb, "init zuma pbb", "\n" - " - init zuma pbb\n" ); U_BOOT_CMD( zdtest, 3, 1, do_zuma_test_dma, "run dma test", "[cmd [count]]\n" - " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" + " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes" ); U_BOOT_CMD( zminit, 1, 0, do_zuma_init_mbox, "init zuma mbox", "\n" - " - init zuma mbox\n" ); #endif diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index eb76d937f..4851f066e 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -279,9 +279,10 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp, } U_BOOT_CMD( - diswd, 1, 0, pixis_disable_watchdog_cmd, - "Disable watchdog timer", - NULL); + diswd, 1, 0, pixis_disable_watchdog_cmd, + "Disable watchdog timer", + "" +); #ifdef CONFIG_PIXIS_SGMII_CMD int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -343,14 +344,15 @@ int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, - "pixis_set_sgmii" - " - Enable or disable SGMII mode for a given TSEC \n", - "\npixis_set_sgmii [TSEC num] \n" - " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" - " on - enables SGMII\n" - " off - disables SGMII\n" - " switch - use switch settings\n"); + pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, + "pixis_set_sgmii" + " - Enable or disable SGMII mode for a given TSEC \n", + "\npixis_set_sgmii [TSEC num] \n" + " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" + " on - enables SGMII\n" + " off - disables SGMII\n" + " switch - use switch settings" +); #endif /* @@ -544,5 +546,5 @@ U_BOOT_CMD( " pixis_reset [altbank]\n" " pixis_reset altbank wd\n" " pixis_reset altbank cf \n" - " pixis_reset cf \n" - ); + " pixis_reset cf " +); diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 2b2d5d7ec..0ad878c29 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -140,8 +140,8 @@ U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp, "Init or Display BMP file", "init\n - initialize DIU\n" - "addr\n - display bmp at address 'addr'\n" - ); + "addr\n - display bmp at address 'addr'" +); #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index b35038dc4..218f1bebf 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -186,7 +186,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpebc, 1, 1, do_dumpebc, "Dump all EBC registers", - NULL + "" ); @@ -208,7 +208,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpdcr, 1, 1, do_dumpdcr, "Dump all DCR registers", - NULL + "" ); @@ -272,6 +272,6 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpspr, 1, 1, do_dumpspr, "Dump all SPR registers", - NULL + "" ); #endif diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 092d36844..262070fdf 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -297,7 +297,7 @@ U_BOOT_CMD( "fpga info\n" " - print information about the Hymod FPGA, namely the\n" " memory addresses at which the four FPGA local bus\n" - " address spaces appear in the physical address space\n" + " address spaces appear in the physical address space" ); /* ------------------------------------------------------------------------- */ int @@ -340,7 +340,7 @@ U_BOOT_CMD( "[type]\n" " - write zeroes into the EEPROM on the board of type `type'\n" " (`type' is either `main' or `mezz' - default `main')\n" - " Note: the EEPROM write enable jumper must be installed\n" + " Note: the EEPROM write enable jumper must be installed" ); /* ------------------------------------------------------------------------- */ diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c index 12c0a85d6..3761ef66d 100644 --- a/board/inka4x0/inkadiag.c +++ b/board/inka4x0/inkadiag.c @@ -439,14 +439,14 @@ static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); cmd_tbl_t cmd_inkadiag_sub[] = { U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input", - " [value] - get or set specified signal\n"), + " [value] - get or set specified signal"), U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port", " - test uart num [0..11] in mode\n" - "and baudrate with msg\n"), + "and baudrate with msg"), U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer", - " - turn buzzer on for period ms with freq hz\n"), + " - turn buzzer on for period ms with freq hz"), U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help", - "[command] - get help for command\n"), + "[command] - get help for command"), }; static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, @@ -483,7 +483,7 @@ U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag, "inkadiag - inka diagnosis\n", "[inkadiag what ...]\n" " - perform a diagnosis on inka hardware\n" - "'inkadiag' performs hardware tests.\n\n"); + "'inkadiag' performs hardware tests."); /* Relocate the command table function pointers when running in RAM */ int inkadiag_init_r (void) { diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c index 57978800f..2e913adc5 100644 --- a/board/keymile/common/keymile_hdlc_enet.c +++ b/board/keymile/common/keymile_hdlc_enet.c @@ -591,7 +591,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d) U_BOOT_CMD( stest, 1, 1, hdlc_enet_stest, "simple send test for hdlc_enet", - "no arguments\n" + "" ); /* simple receive test routine */ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d) @@ -613,7 +613,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d) U_BOOT_CMD( rtest, 1, 1, hdlc_enet_rtest, "simple receive test for hdlc_enet", - "no arguments\n" + "" ); #endif diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index 1b665a918..75b32090d 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -853,7 +853,7 @@ U_BOOT_CMD( pic, 4, 1, do_pic, "read and write PIC registers", "read reg - read PIC register `reg'\n" - "pic write reg val - write value `val' to PIC register `reg'\n" + "pic write reg val - write value `val' to PIC register `reg'" ); /*********************************************************************** @@ -911,7 +911,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); /* Read and set LSB switch */ @@ -985,7 +985,7 @@ U_BOOT_CMD( "check and set LSB switch", "on - switch LSB on\n" "lsb off - switch LSB off\n" - "lsb - print current setting\n" + "lsb - print current setting" ); #endif diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c index bafd39c62..be1a1dfeb 100644 --- a/board/lwmon5/kbd.c +++ b/board/lwmon5/kbd.c @@ -433,7 +433,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); /*----------------------------- Utilities -----------------------------*/ diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 4c04b9841..9b76e7663 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -487,7 +487,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepromwp, 2, 0, do_eeprom_wp, "eeprom write protect off/on", - " - enable (on) or disable (off) I2C EEPROM write protect\n" + " - enable (on) or disable (off) I2C EEPROM write protect" ); #if defined(CONFIG_VIDEO) diff --git a/board/micronas/vct/smc_eeprom.c b/board/micronas/vct/smc_eeprom.c index 2bc7ad4c4..6587f13e2 100644 --- a/board/micronas/vct/smc_eeprom.c +++ b/board/micronas/vct/smc_eeprom.c @@ -384,11 +384,11 @@ static int do_eeprom_save_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] } U_BOOT_CMD(smcee, 1, 0, do_eeprom_erase_all, - "smcee - Erase content of SMC EEPROM\n",); + "smcee - Erase content of SMC EEPROM",); U_BOOT_CMD(smced, 1, 0, do_eeprom_dump, - "smced - Dump content of SMC EEPROM\n",); + "smced - Dump content of SMC EEPROM",); U_BOOT_CMD(smcew, 2, 0, do_eeprom_save_mac, "smcew - Write MAC address to SMC EEPROM\n", - "aa:bb:cc:dd:ee:ff new mac address\n"); + "aa:bb:cc:dd:ee:ff new mac address"); diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c index dc1380445..cd93a7ca0 100644 --- a/board/mpl/mip405/cmd_mip405.c +++ b/board/mpl/mip405/cmd_mip405.c @@ -60,7 +60,7 @@ U_BOOT_CMD( "mip405 flash mps - updates U-Boot with image from MPS\n" "mip405 info - displays board information\n" "mip405 led - switches LED on (on=1) or off (on=0)\n" - "mip405 mem [cnt] - Memory Test -times, = -1 loop forever\n" + "mip405 mem [cnt] - Memory Test -times, = -1 loop forever" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c index 95bfdcc8c..0682323ae 100644 --- a/board/mpl/pati/cmd_pati.c +++ b/board/mpl/pati/cmd_pati.c @@ -443,7 +443,7 @@ U_BOOT_CMD( " era - erase PCI EEPROM (write all word to 0xffff)\n" " reload- Reload PCI Bridge with EEPROM Values\n" " NOTE: must start on word boundary\n" - " and must be even byte values\n" + " and must be even byte values" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c index ad5e0a1e1..6bbae89e5 100644 --- a/board/mpl/pip405/cmd_pip405.c +++ b/board/mpl/pip405/cmd_pip405.c @@ -63,7 +63,7 @@ U_BOOT_CMD( "PIP405 specific Cmds", "flash mem [SrcAddr] - updates U-Boot with image in memory\n" "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" - "pip405 flash mps - updates U-Boot with image from MPS\n" + "pip405 flash mps - updates U-Boot with image from MPS" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c index cbe7fe256..016077439 100644 --- a/board/mpl/vcma9/cmd_vcma9.c +++ b/board/mpl/vcma9/cmd_vcma9.c @@ -174,5 +174,5 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcma9, 6, 1, do_vcma9, "VCMA9 specific commands", - "flash mem [SrcAddr]\n - updates U-Boot with image in memory\n" + "flash mem [SrcAddr]\n - updates U-Boot with image in memory" ); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 80c2cb58e..7985f7d71 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -239,7 +239,7 @@ U_BOOT_CMD( "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" - "wd - print current status\n" + "wd - print current status" ); #endif diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 9cc3f5b64..47d639146 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -763,7 +763,7 @@ U_BOOT_CMD( " 0x02 = DIAG 2 on\n" " 0x04 = DIAG 3 on\n" " 0x08 = DIAG 4 on\n" - " > 0x100 set the LED, who are on, to state blinking\n" + " > 0x100 set the LED, who are on, to state blinking" ); #if defined(CONFIG_SHA1_CHECK_UB_IMG) @@ -823,7 +823,7 @@ U_BOOT_CMD( "calculate the SHA1 Sum", "address len [addr] calculate the SHA1 sum [save at addr]\n" " -p calculate the SHA1 sum from the U-Boot image in flash and print\n" - " -c check the U-Boot image in flash\n" + " -c check the U-Boot image in flash" ); #endif diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index ff5d63ee1..a98935172 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -54,8 +54,8 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led , 3, 1, do_led, "set LED 0..11 on the PN62 board", - "i fun\n" - " - set 'i'th LED to function 'fun'\n" + "i fun" + " - set 'i'th LED to function 'fun'" ); /* @@ -177,7 +177,7 @@ U_BOOT_CMD( loadpci, 2, 1, do_loadpci, "load binary file over PCI", "[addr]\n" - " - load binary file over PCI to address 'addr'\n" + " - load binary file over PCI to address 'addr'" ); #endif diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index 877728403..c323456d6 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -228,7 +228,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fpga, 2, 0, do_fpga, "boot FPGA", - "address size\n - boot FPGA with gzipped image at
\n" + "address size\n - boot FPGA with gzipped image at
" ); #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index aa598aaa4..e9e479c4b 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -129,7 +129,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, "custom IDP command", - "no args at this time\n" + "no args at this time" ); #endif diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c index 1871984a6..703af73aa 100644 --- a/board/r360mpi/r360mpi.c +++ b/board/r360mpi/r360mpi.c @@ -415,5 +415,5 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c index 6d0bbc0c2..634efb42a 100644 --- a/board/renesas/sh7785lcr/rtl8169_mac.c +++ b/board/renesas/sh7785lcr/rtl8169_mac.c @@ -325,7 +325,7 @@ U_BOOT_CMD( setmac, 2, 1, do_set_mac, "write MAC address for RTL8110SCL", "\n" - "setmac - write MAC address for RTL8110SCL\n" + "setmac - write MAC address for RTL8110SCL" ); int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -344,5 +344,5 @@ U_BOOT_CMD( printmac, 1, 1, do_print_mac, "print MAC address for RTL8110", "\n" - " - print MAC address for RTL8110\n" + " - print MAC address for RTL8110" ); diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c index 6dbb7842e..e803b3c9c 100644 --- a/board/renesas/sh7785lcr/selfcheck.c +++ b/board/renesas/sh7785lcr/selfcheck.c @@ -168,5 +168,5 @@ U_BOOT_CMD( "hwtest sm107 - output SM107 version\n" "hwtest net - check RTL8110 ID\n" "hwtest sata - check SiI3512 ID\n" - "hwtest pci - output PCI slot device ID\n" + "hwtest pci - output PCI slot device ID" ); diff --git a/board/renesas/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c index 6bdf3c067..9948d04ea 100644 --- a/board/renesas/sh7785lcr/sh7785lcr.c +++ b/board/renesas/sh7785lcr/sh7785lcr.c @@ -82,6 +82,6 @@ U_BOOT_CMD( pmb, 1, 1, do_pmb, "pmb - PMB setting\n", "\n" - " - PMB setting for all SDRAM mapping\n" + " - PMB setting for all SDRAM mapping" ); #endif diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c index c1af70cea..bc88e5a7e 100644 --- a/board/sandburst/common/ppc440gx_i2c.c +++ b/board/sandburst/common/ppc440gx_i2c.c @@ -501,7 +501,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iprobe1, 1, 1, do_i2c1_probe, "probe to discover valid I2C chip addresses", - "\n -discover valid I2C chip addresses\n" + "" ); #endif /* CONFIG_I2C_BUS1 */ diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index b8ae68fcd..92f524756 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -611,7 +611,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(kasetup, 1, 1, karefSetupVars, - "Set environment to factory defaults", NULL); + "Set environment to factory defaults", ""); U_BOOT_CMD(karecover, 1, 1, karefRecover, - "Set environment to allow for fs recovery", NULL); + "Set environment to allow for fs recovery", ""); diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index fc136c89c..27d7f7408 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -577,7 +577,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars, - "Set environment to factory defaults", NULL); + "Set environment to factory defaults", ""); U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover, - "Set environment to allow for fs recovery", NULL); + "Set environment to allow for fs recovery", ""); diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c index c9a93e158..4b45902aa 100644 --- a/board/siemens/common/fpga.c +++ b/board/siemens/common/fpga.c @@ -295,7 +295,7 @@ U_BOOT_CMD( "access FPGA(s)", "fpga status [name] - print FPGA status\n" "fpga reset [name] - reset FPGA\n" - "fpga load [name] addr - load FPGA configuration data\n" + "fpga load [name] addr - load FPGA configuration data" ); #endif diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index f87d6bc00..827578c3a 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -404,10 +404,10 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (puma, 4, 1, do_puma, - "access PUMA FPGA", - "status - print PUMA status\n" - "puma load addr len - load PUMA configuration data\n"); - + "access PUMA FPGA", + "status - print PUMA status\n" + "puma load addr len - load PUMA configuration data" +); #endif /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c index 99ff50760..449c1a499 100644 --- a/board/ssv/common/cmd_sled.c +++ b/board/ssv/common/cmd_sled.c @@ -157,6 +157,6 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (sled, 3, 0, do_sled, "check and set status led", - "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n"); + "sled [name [state]]\n" __NAME_STR " - state: on|off|blink"); #endif #endif /* CONFIG_STATUS_LED */ diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c index 9b384259e..eaf1d2526 100644 --- a/board/ssv/common/wd_pio.c +++ b/board/ssv/common/wd_pio.c @@ -154,7 +154,7 @@ U_BOOT_CMD( "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" - "wd - print current status\n" + "wd - print current status" ); #endif #endif /* CONFIG_HW_WATCHDOG */ diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 20632a7f1..e309beb1d 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -1201,21 +1201,21 @@ U_BOOT_CMD( "sound square [duration] [freq] [channel]\n" " - generate squarewave for 'duration' ms with frequency 'freq'\n" " on left \"l\" or right \"r\" channel\n" - "pcm1772 reg val\n" + "pcm1772 reg val" ); U_BOOT_CMD( wav , 3, 1, cmd_wav, "play wav file", "[addr] [bytes]\n" - " - play wav file at address 'addr' with length 'bytes'\n" + " - play wav file at address 'addr' with length 'bytes'" ); U_BOOT_CMD( beep , 2, 1, cmd_beep, "play short beep", "[channel]\n" - " - play short beep on \"l\"eft or \"r\"ight channel\n" + " - play short beep on \"l\"eft or \"r\"ight channel" ); #endif /* CONFIG_STK52XX || CONFIG_FO300 */ @@ -1228,10 +1228,11 @@ U_BOOT_CMD( "fkt can\n" " - loopback plug for X83 required\n" "fkt rs232 number\n" - " - loopback plug(s) for X2 required\n" + " - loopback plug(s) for X2 required" #ifndef CONFIG_TQM5200S + "\n" "fkt backlight on/off\n" - " - switch backlight on or off\n" + " - switch backlight on or off" #endif /* !CONFIG_TQM5200S */ ); #elif defined(CONFIG_FO300) @@ -1241,7 +1242,7 @@ U_BOOT_CMD( "fkt can\n" " - loopback plug for X16/X29 required\n" "fkt rs232 number\n" - " - loopback plug(s) for X21/X22 required\n" + " - loopback plug(s) for X21/X22 required" ); #endif #endif diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c index b9c9e7e19..578e716e7 100644 --- a/board/tqc/tqm5200/cmd_tb5200.c +++ b/board/tqc/tqm5200/cmd_tb5200.c @@ -91,13 +91,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led , 2, 1, cmd_led, "switch status LED on or off", - "on/off\n" + "on/off" ); U_BOOT_CMD( backlight , 2, 1, cmd_backlight, "switch backlight on or off", - "on/off\n" + "on/off" ); #endif /* CONFIG_STK52XX */ diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c index 5bc080ff8..92f74a39c 100644 --- a/board/tqc/tqm8272/tqm8272.c +++ b/board/tqc/tqm8272/tqm8272.c @@ -867,7 +867,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwib, 1, 1, do_hwib_dump, "dump HWIB'", - "\n" + "" ); #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 7e2a67234..d0465fb7e 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -262,7 +262,7 @@ U_BOOT_CMD( "\n" " - start burn-in test application\n" " The burn-in test could took a while to finish!\n" - " The content of the onboard EEPROM is modified!\n" + " The content of the onboard EEPROM is modified!" ); @@ -295,7 +295,7 @@ U_BOOT_CMD( "read dip switch on TRAB", "\n" " - read state of dip switch (S1) on TRAB board\n" - " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n" + " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"" ); @@ -323,7 +323,7 @@ U_BOOT_CMD( vcc5v, 1, 1, do_vcc5v, "read VCC5V on TRAB", "\n" - " - read actual value of voltage VCC5V\n" + " - read actual value of voltage VCC5V" ); @@ -347,7 +347,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( c_temp, 1, 1, do_contact_temp, "read contact temperature on TRAB", - "\n" + "" " - reads the onboard temperature (=contact temperature)\n" ); @@ -401,7 +401,7 @@ U_BOOT_CMD( "print burn in status on TRAB", "\n" " - prints the status variables of the last burn in test\n" - " stored in the onboard EEPROM on TRAB board\n" + " stored in the onboard EEPROM on TRAB board" ); static int read_dip (void) @@ -890,7 +890,7 @@ U_BOOT_CMD( "delay\n" " - contact temperature [1/100 C] is printed endlessly to console\n" " specifies the seconds to wait between two measurements\n" - " For each measurment a timestamp is printeted\n" + " For each measurment a timestamp is printeted" ); #endif diff --git a/board/trab/trab.c b/board/trab/trab.c index 53590650f..ddf6abf7b 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -323,7 +323,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); #ifdef CONFIG_MODEM_SUPPORT diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index 9fa7aef9a..b6b16bf68 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -81,4 +81,5 @@ U_BOOT_CMD( "\tdm9000ee read \n" "\tword:\t\t00-02 : MAC Address\n" "\t\t\t03-07 : DM9000 Configuration\n" - "\t\t\t08-63 : User data\n"); + "\t\t\t08-63 : User data" +); diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c index eaec940e6..013fc791f 100644 --- a/board/w7o/cmd_vpd.c +++ b/board/w7o/cmd_vpd.c @@ -60,7 +60,7 @@ U_BOOT_CMD( vpd, 2, 1, do_vpd, "Read Vital Product Data", "[dev_addr]\n" - " - Read VPD Data from default address, or device address 'dev_addr'.\n" + " - Read VPD Data from default address, or device address 'dev_addr'." ); #endif diff --git a/board/zeus/update.c b/board/zeus/update.c index ce1f34fee..c8487e58f 100644 --- a/board/zeus/update.c +++ b/board/zeus/update.c @@ -99,7 +99,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( update_boot_eeprom, 1, 1, do_update_boot_eeprom, "update boot eeprom content", - NULL + "" ); #endif diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c index 3f329c2fc..9bc390f83 100644 --- a/board/zeus/zeus.c +++ b/board/zeus/zeus.c @@ -328,7 +328,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setdef, 4, 1, do_set_default, "write board-specific values to EEPROM (ethaddr...)", - "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n" + "ethaddr eth1addr serial#\n - write board-specific values to EEPROM" ); static inline int sw_reset_pressed(void) @@ -419,7 +419,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( chkreset, 1, 1, do_chkreset, "Check for status of SW-reset button and act accordingly", - NULL + "" ); #if defined(CONFIG_POST) diff --git a/common/cmd_ambapp.c b/common/cmd_ambapp.c index 06531f12b..bb20ab514 100644 --- a/common/cmd_ambapp.c +++ b/common/cmd_ambapp.c @@ -273,6 +273,7 @@ int ambapp_init_reloc(void) } U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print, - "list AMBA Plug&Play information", - "ambapp\n" - " - lists AMBA (AHB & APB) Plug&Play devices present on the system\n"); + "list AMBA Plug&Play information", + "ambapp\n" + " - lists AMBA (AHB & APB) Plug&Play devices present on the system" +); diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index b230924ee..11c154731 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -384,5 +384,5 @@ static void print_str(const char *name, const char *str) U_BOOT_CMD( bdinfo, 1, 1, do_bdinfo, "print Board Info structure", - NULL + "" ); diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index cd9e720fc..8be1c25fd 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -108,7 +108,7 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (ds, 3, 1, do_bedbug_dis, "disassemble memory", - "ds
[# instructions]\n"); + "ds
[# instructions]"); /* ====================================================================== * Entry point from the interpreter to the assembler. Assembles @@ -160,7 +160,7 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_asm */ U_BOOT_CMD (as, 2, 0, do_bedbug_asm, - "assemble memory", "as
\n"); + "assemble memory", "as
"); /* ====================================================================== * Used to set a break point from the interpreter. Simply calls into the @@ -181,7 +181,7 @@ U_BOOT_CMD (break, 3, 0, do_bedbug_break, " - Set or clear a breakpoint\n" "break
- Break at an address\n" "break off - Disable breakpoint.\n" - "break show - List breakpoints.\n"); + "break show - List breakpoints."); /* ====================================================================== * Called from the debug interrupt routine. Simply calls the CPU-specific @@ -278,7 +278,7 @@ int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (continue, 1, 0, do_bedbug_continue, "continue from a breakpoint", - " - continue from a breakpoint.\n"); + ""); /* ====================================================================== * Interpreter command to continue to the next instruction, stepping into @@ -309,7 +309,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (step, 1, 1, do_bedbug_step, "single step execution.", - " - single step execution.\n"); + ""); /* ====================================================================== * Interpreter command to continue to the next instruction, stepping over @@ -340,7 +340,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (next, 1, 1, do_bedbug_next, "single step execution, stepping over subroutines.", - " - single step execution, stepping over subroutines.\n"); + ""); /* ====================================================================== * Interpreter command to print the current stack. This assumes an EABI @@ -385,7 +385,7 @@ int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (where, 1, 1, do_bedbug_stack, "Print the running stack.", - " - Print the running stack.\n"); + ""); /* ====================================================================== * Interpreter command to dump the registers. Calls the CPU-specific @@ -405,7 +405,7 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_rdump */ U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump, - "Show registers.", " - Show registers.\n"); + "Show registers.", ""); /* ====================================================================== */ diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index abbb0704f..fc8462ead 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -141,7 +141,7 @@ U_BOOT_CMD( bmp, 5, 1, do_bmp, "manipulate BMP image data", "info - display image info\n" - "bmp display [x y] - display image at x,y\n" + "bmp display [x y] - display image at x,y" ); /* diff --git a/common/cmd_boot.c b/common/cmd_boot.c index efc1a0262..bfc1db21d 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -66,7 +66,7 @@ U_BOOT_CMD( go, CONFIG_SYS_MAXARGS, 1, do_go, "start application at address 'addr'", "addr [arg ...]\n - start application at address 'addr'\n" - " passing 'arg' as arguments\n" + " passing 'arg' as arguments" ); extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -74,5 +74,5 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( reset, 1, 0, do_reset, "Perform RESET of the CPU", - NULL + "" ); diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c index 48d113f1f..b2a8b0e19 100644 --- a/common/cmd_bootldr.c +++ b/common/cmd_bootldr.c @@ -170,4 +170,5 @@ int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(bootldr, 2, 0, do_bootldr, "boot ldr image from memory", "[addr]\n" - " - boot ldr image stored in memory\n"); + "" +); diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index bd1813ad4..367d5a7a9 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -948,7 +948,7 @@ U_BOOT_CMD( "\tbdt - OS specific bd_t processing\n" "\tcmdline - OS specific command line processing/setup\n" "\tprep - OS specific prep before relocation or go\n" - "\tgo - start OS\n" + "\tgo - start OS" ); /*******************************************************************/ @@ -973,14 +973,14 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( boot, 1, 1, do_bootd, "boot default, i.e., run 'bootcmd'", - NULL + "" ); /* keep old command name "bootd" for backward compatibility */ U_BOOT_CMD( bootd, 1, 1, do_bootd, "boot default, i.e., run 'bootcmd'", - NULL + "" ); #endif @@ -1068,7 +1068,7 @@ U_BOOT_CMD( "addr [addr ...]\n" " - print header information for application image starting at\n" " address 'addr' in memory; this includes verification of the\n" - " image contents (magic number, header and payload checksums)\n" + " image contents (magic number, header and payload checksums)" ); #endif @@ -1135,7 +1135,7 @@ U_BOOT_CMD( "list all images found in flash", "\n" " - Prints information about all images found at sector\n" - " boundaries in flash.\n" + " boundaries in flash." ); #endif diff --git a/common/cmd_cache.c b/common/cmd_cache.c index c0f2cbaf6..0dfa3363b 100644 --- a/common/cmd_cache.c +++ b/common/cmd_cache.c @@ -99,14 +99,14 @@ U_BOOT_CMD( icache, 2, 1, do_icache, "enable or disable instruction cache", "[on, off]\n" - " - enable or disable instruction cache\n" + " - enable or disable instruction cache" ); U_BOOT_CMD( dcache, 2, 1, do_dcache, "enable or disable data cache", "[on, off]\n" - " - enable or disable data (writethrough) cache\n" + " - enable or disable data (writethrough) cache" ); #endif diff --git a/common/cmd_cplbinfo.c b/common/cmd_cplbinfo.c index 56e70d615..1a044d290 100644 --- a/common/cmd_cplbinfo.c +++ b/common/cmd_cplbinfo.c @@ -55,5 +55,5 @@ int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo, "display current CPLB tables", - "\n" - " - display current CPLB tables\n"); + "" +); diff --git a/common/cmd_dataflash_mmc_mux.c b/common/cmd_dataflash_mmc_mux.c index 4b2cf1c2c..97e303e94 100644 --- a/common/cmd_dataflash_mmc_mux.c +++ b/common/cmd_dataflash_mmc_mux.c @@ -61,5 +61,5 @@ U_BOOT_CMD( dataflash_mmc_mux, 2, 1, do_dataflash_mmc_mux, "dataflash_mmc_mux\t- enable or disable MMC or SPI\n", "[mmc, spi]\n" - " - enable or disable MMC or SPI\n" + " - enable or disable MMC or SPI" ); diff --git a/common/cmd_date.c b/common/cmd_date.c index 3d78be269..b69e93508 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -218,5 +218,5 @@ U_BOOT_CMD( "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n" " - without arguments: print date & time\n" " - with numeric argument: set the system date & time\n" - " - with 'reset' argument: reset the RTC\n" + " - with 'reset' argument: reset the RTC" ); diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c index 7aed06c11..4f23b8d59 100644 --- a/common/cmd_dcr.c +++ b/common/cmd_dcr.c @@ -224,22 +224,22 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getdcr, 2, 1, do_getdcr, "Get an AMCC PPC 4xx DCR's value", - "dcrn - return a DCR's value.\n" + "dcrn - return a DCR's value." ); U_BOOT_CMD( setdcr, 2, 1, do_setdcr, "Set an AMCC PPC 4xx DCR's value", - "dcrn - set a DCR's value.\n" + "dcrn - set a DCR's value." ); U_BOOT_CMD( getidcr, 3, 1, do_getidcr, "Get a register value via indirect DCR addressing", - "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n" + "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn." ); U_BOOT_CMD( setidcr, 4, 1, do_setidcr, "Set a register value via indirect DCR addressing", - "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n" + "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn." ); diff --git a/common/cmd_df.c b/common/cmd_df.c index d64f9009d..7f957fed4 100644 --- a/common/cmd_df.c +++ b/common/cmd_df.c @@ -34,4 +34,4 @@ usage: U_BOOT_CMD( sf, 2, 1, do_serial_flash, "Serial flash sub-system", - "probe [bus:]cs - init flash device on given SPI bus and CS\n") + "probe [bus:]cs - init flash device on given SPI bus and CS") diff --git a/common/cmd_diag.c b/common/cmd_diag.c index c2a617547..0436c492f 100644 --- a/common/cmd_diag.c +++ b/common/cmd_diag.c @@ -72,5 +72,5 @@ U_BOOT_CMD( " - print information about specified tests\n" "diag run - run all available tests\n" "diag run [test1 [test2]]\n" - " - run specified tests\n" + " - run specified tests" ); diff --git a/common/cmd_display.c b/common/cmd_display.c index 4102424d1..34223952e 100644 --- a/common/cmd_display.c +++ b/common/cmd_display.c @@ -74,5 +74,5 @@ U_BOOT_CMD( "display string on dot matrix display", "[]\n" " - with argument: display on dot matrix display\n" - " - without arguments: clear dot matrix display\n" + " - without arguments: clear dot matrix display" ); diff --git a/common/cmd_doc.c b/common/cmd_doc.c index 3385c6736..5cc90f064 100644 --- a/common/cmd_doc.c +++ b/common/cmd_doc.c @@ -202,7 +202,7 @@ U_BOOT_CMD( "doc write addr off size - read/write `size'" " bytes starting at offset `off'\n" " to/from memory address `addr'\n" - "doc erase off size - erase `size' bytes of DOC from offset `off'\n" + "doc erase off size - erase `size' bytes of DOC from offset `off'" ); int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -342,7 +342,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( docboot, 4, 1, do_docboot, "boot from DOC device", - "loadAddr dev\n" + "loadAddr dev" ); int doc_rw (struct DiskOnChip* this, int cmd, diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index 7783c880b..3cfd36ef7 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -55,6 +55,6 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dtt, 1, 1, do_dtt, - "Digital Thermometer and Thermostat", - " - Read temperature from digital thermometer and thermostat.\n" + "Read temperature from Digital Thermometer and Thermostat", + "" ); diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index f749087eb..102efaf5b 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -424,7 +424,7 @@ U_BOOT_CMD( "EEPROM sub-system", "read devaddr addr off cnt\n" "eeprom write devaddr addr off cnt\n" - " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'\n" + " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'" ); #else /* One EEPROM */ U_BOOT_CMD( @@ -432,7 +432,7 @@ U_BOOT_CMD( "EEPROM sub-system", "read addr off cnt\n" "eeprom write addr off cnt\n" - " - read/write `cnt' bytes at EEPROM offset `off'\n" + " - read/write `cnt' bytes at EEPROM offset `off'" ); #endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */ diff --git a/common/cmd_elf.c b/common/cmd_elf.c index 83e758999..abec7ddc9 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -313,11 +313,11 @@ unsigned long load_elf_image (unsigned long addr) U_BOOT_CMD( bootelf, 2, 0, do_bootelf, "Boot from an ELF image in memory", - " [address] - load address of ELF image.\n" + " [address] - load address of ELF image." ); U_BOOT_CMD( bootvx, 2, 0, do_bootvx, "Boot vxWorks from an ELF image", - " [address] - load address of vxWorks ELF image.\n" + " [address] - load address of vxWorks ELF image." ); diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 923b35567..6ee60c66f 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -118,7 +118,7 @@ U_BOOT_CMD( ext2ls, 4, 1, do_ext2ls, "list files in a directory (default /)", " [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'\n" + " - list files from 'dev' on 'interface' in a 'directory'" ); /****************************************************************************** @@ -256,5 +256,5 @@ U_BOOT_CMD( "load binary file from a Ext2 filesystem", " [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from ext2 filesystem\n" + " to address 'addr' from ext2 filesystem" ); diff --git a/common/cmd_fat.c b/common/cmd_fat.c index 4a26b8072..f3089a296 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -91,7 +91,7 @@ U_BOOT_CMD( "load binary file from a dos filesystem", " [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from dos filesystem\n" + " to address 'addr' from dos filesystem" ); int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -138,7 +138,7 @@ U_BOOT_CMD( fatls, 4, 1, do_fat_ls, "list files in a directory (default /)", " [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'\n" + " - list files from 'dev' on 'interface' in a 'directory'" ); int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -176,7 +176,7 @@ U_BOOT_CMD( fatinfo, 3, 1, do_fat_fsinfo, "print information about filesystem", " \n" - " - print information about filesystem from 'dev' on 'interface'\n" + " - print information about filesystem from 'dev' on 'interface'" ); #ifdef NOT_IMPLEMENTED_YET diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index c043b9765..8e18c71bf 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -903,6 +903,6 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fdcboot, 3, 1, do_fdcboot, "boot from floppy device", - "loadAddr drive\n" + "loadAddr drive" ); #endif diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c index bcf98d9e4..3cc658624 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c @@ -143,11 +143,11 @@ int do_fdosls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fdosboot, 3, 0, do_fdosboot, "boot from a dos floppy file", - "[loadAddr] [filename]\n" + "[loadAddr] [filename]" ); U_BOOT_CMD( fdosls, 2, 0, do_fdosls, "list files in a directory", - "[directory]\n" + "[directory]" ); diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 0947b72d2..86837723b 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -840,5 +840,5 @@ U_BOOT_CMD( "fdt chosen [ ] - Add/update the /chosen branch in the tree\n" " / - initrd start/end addr\n" "NOTE: Dereference aliases by omiting the leading '/', " - "e.g. fdt print ethernet0.\n" + "e.g. fdt print ethernet0." ); diff --git a/common/cmd_flash.c b/common/cmd_flash.c index f1f3517b1..9f27ab0dd 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -712,7 +712,7 @@ U_BOOT_CMD( flinfo, 2, 1, do_flinfo, "print FLASH memory information", "\n - print information for all FLASH memory banks\n" - "flinfo N\n - print information for FLASH memory bank # N\n" + "flinfo N\n - print information for FLASH memory bank # N" ); U_BOOT_CMD( @@ -726,7 +726,7 @@ U_BOOT_CMD( "erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n" "erase bank N\n - erase FLASH bank # N\n" TMP_ERASE - "erase all\n - erase all FLASH banks\n" + "erase all\n - erase all FLASH banks" ); U_BOOT_CMD( @@ -751,7 +751,7 @@ U_BOOT_CMD( " - make sectors SF-SL writable in FLASH bank # N\n" "protect off bank N\n - make FLASH bank # N writable\n" TMP_PROT_OFF - "protect off all\n - make all FLASH banks writable\n" + "protect off all\n - make all FLASH banks writable" ); #undef TMP_ERASE diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 362bffdcd..2e017b84d 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -357,9 +357,10 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga, "\tload\tLoad device from memory buffer\n" "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n" "\tloadmk\tLoad device generated with mkimage\n" - "\tdump\tLoad device to memory buffer\n" + "\tdump\tLoad device to memory buffer" #if defined(CONFIG_FIT) + "\n" "\tFor loadmk operating on FIT format uImage address must include\n" - "\tsubimage unit name in the form of addr:\n" + "\tsubimage unit name in the form of addr:" #endif ); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index b922b966a..ae2684516 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1315,9 +1315,10 @@ U_BOOT_CMD( "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" "i2c probe - show devices on the I2C bus\n" "i2c reset - re-init the I2C Controller\n" - "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" + "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device" #if defined(CONFIG_CMD_SDRAM) - "i2c sdram chip - print SDRAM configuration information\n" + "\n" + "i2c sdram chip - print SDRAM configuration information" #endif ); diff --git a/common/cmd_ide.c b/common/cmd_ide.c index d86bf3703..feda773be 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -2108,11 +2108,11 @@ U_BOOT_CMD( "ide read addr blk# cnt\n" "ide write addr blk# cnt - read/write `cnt'" " blocks starting at block `blk#'\n" - " to/from memory address `addr'\n" + " to/from memory address `addr'" ); U_BOOT_CMD( diskboot, 3, 1, do_diskboot, "boot from IDE device", - "loadAddr dev:part\n" + "loadAddr dev:part" ); diff --git a/common/cmd_immap.c b/common/cmd_immap.c index c8367f0fb..37e60582f 100644 --- a/common/cmd_immap.c +++ b/common/cmd_immap.c @@ -615,39 +615,39 @@ do_mccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( siuinfo, 1, 1, do_siuinfo, "print System Interface Unit (SIU) registers", - NULL + "" ); U_BOOT_CMD( memcinfo, 1, 1, do_memcinfo, "print Memory Controller registers", - NULL + "" ); U_BOOT_CMD( sitinfo, 1, 1, do_sitinfo, "print System Integration Timers (SIT) registers", - NULL + "" ); #ifdef CONFIG_8260 U_BOOT_CMD( icinfo, 1, 1, do_icinfo, "print Interrupt Controller registers", - NULL + "" ); #endif U_BOOT_CMD( carinfo, 1, 1, do_carinfo, "print Clocks and Reset registers", - NULL + "" ); U_BOOT_CMD( iopinfo, 1, 1, do_iopinfo, "print I/O Port registers", - NULL + "" ); U_BOOT_CMD( @@ -659,62 +659,61 @@ U_BOOT_CMD( U_BOOT_CMD( dmainfo, 1, 1, do_dmainfo, "print SDMA/IDMA registers", - NULL + "" ); U_BOOT_CMD( fccinfo, 1, 1, do_fccinfo, "print FCC registers", - NULL + "" ); U_BOOT_CMD( brginfo, 1, 1, do_brginfo, "print Baud Rate Generator (BRG) registers", - NULL + "" ); U_BOOT_CMD( i2cinfo, 1, 1, do_i2cinfo, "print I2C registers", - NULL + "" ); U_BOOT_CMD( sccinfo, 1, 1, do_sccinfo, "print SCC registers", - NULL + "" ); U_BOOT_CMD( smcinfo, 1, 1, do_smcinfo, "print SMC registers", - NULL + "" ); U_BOOT_CMD( spiinfo, 1, 1, do_spiinfo, "print Serial Peripheral Interface (SPI) registers", - NULL + "" ); U_BOOT_CMD( muxinfo, 1, 1, do_muxinfo, "print CPM Multiplexing registers", - NULL + "" ); U_BOOT_CMD( siinfo, 1, 1, do_siinfo, "print Serial Interface (SI) registers", - NULL + "" ); U_BOOT_CMD( mccinfo, 1, 1, do_mccinfo, "print MCC registers", - NULL + "" ); - #endif diff --git a/common/cmd_irq.c b/common/cmd_irq.c index a21aedea4..4604a5a31 100644 --- a/common/cmd_irq.c +++ b/common/cmd_irq.c @@ -45,6 +45,5 @@ int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( interrupts, 5, 0, do_interrupts, "enable or disable interrupts", - "[on, off]\n" - " - enable or disable interrupts\n" + "[on, off]" ); diff --git a/common/cmd_itest.c b/common/cmd_itest.c index 309b08bb0..5b301bf5a 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -191,5 +191,5 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) U_BOOT_CMD( itest, 4, 0, do_itest, "return true/false on integer compare", - "[.b, .w, .l, .s] [*]value1 [*]value2\n" + "[.b, .w, .l, .s] [*]value1 [*]value2" ); diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 3bb6c3cb1..4db4a83aa 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -636,18 +636,17 @@ U_BOOT_CMD( "load binary file from a filesystem image", "[ off ] [ filename ]\n" " - load binary file from flash bank\n" - " with offset 'off'\n" + " with offset 'off'" ); U_BOOT_CMD( ls, 2, 1, do_jffs2_ls, "list files in a directory (default /)", - "[ directory ]\n" - " - list files in a directory.\n" + "[ directory ]" ); U_BOOT_CMD( fsinfo, 1, 1, do_jffs2_fsinfo, "print information about filesystems", - " - print information about filesystems\n" + "" ); /***************************************************/ diff --git a/common/cmd_license.c b/common/cmd_license.c index c3c34967d..141215b3a 100644 --- a/common/cmd_license.c +++ b/common/cmd_license.c @@ -53,7 +53,8 @@ int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(license, 1, 1, do_license, - "print GPL license text", - NULL); + "print GPL license text", + "" +); #endif /* CONFIG_CMD_LICENSE */ diff --git a/common/cmd_load.c b/common/cmd_load.c index 2b5a66dd6..73fbf743c 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -1049,7 +1049,7 @@ U_BOOT_CMD( "load S-Record file over serial line", "[ off ] [ baud ]\n" " - load S-Record file over serial line" - " with offset 'off' and baudrate 'baud'\n" + " with offset 'off' and baudrate 'baud'" ); #else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */ @@ -1057,7 +1057,7 @@ U_BOOT_CMD( loads, 2, 0, do_load_serial, "load S-Record file over serial line", "[ off ]\n" - " - load S-Record file over serial line with offset 'off'\n" + " - load S-Record file over serial line with offset 'off'" ); #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ @@ -1073,14 +1073,14 @@ U_BOOT_CMD( "save S-Record file over serial line", "[ off ] [size] [ baud ]\n" " - save S-Record file over serial line" - " with offset 'off', size 'size' and baudrate 'baud'\n" + " with offset 'off', size 'size' and baudrate 'baud'" ); #else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */ U_BOOT_CMD( saves, 3, 0, do_save_serial, "save S-Record file over serial line", "[ off ] [size]\n" - " - save S-Record file over serial line with offset 'off' and size 'size'\n" + " - save S-Record file over serial line with offset 'off' and size 'size'" ); #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ #endif @@ -1093,7 +1093,7 @@ U_BOOT_CMD( "load binary file over serial line (kermit mode)", "[ off ] [ baud ]\n" " - load binary file over serial line" - " with offset 'off' and baudrate 'baud'\n" + " with offset 'off' and baudrate 'baud'" ); U_BOOT_CMD( @@ -1101,7 +1101,7 @@ U_BOOT_CMD( "load binary file over serial line (ymodem mode)", "[ off ] [ baud ]\n" " - load binary file over serial line" - " with offset 'off' and baudrate 'baud'\n" + " with offset 'off' and baudrate 'baud'" ); #endif @@ -1130,8 +1130,8 @@ int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwflow, 2, 0, do_hwflow, - "turn the harwdare flow control on/off", - "[on|off]\n - change RTS/CTS hardware flow control over serial line\n" + "turn RTS/CTS hardware flow control in serial line on/off", + "[on|off]" ); #endif diff --git a/common/cmd_log.c b/common/cmd_log.c index a03835d02..d422d9f92 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -256,7 +256,7 @@ U_BOOT_CMD( "info - show pointer details\n" "log reset - clear contents\n" "log show - show contents\n" - "log append - append to the logbuffer\n" + "log append - append to the logbuffer" ); static int logbuff_printk(const char *line) diff --git a/common/cmd_mac.c b/common/cmd_mac.c index cf601e4e6..20403da39 100644 --- a/common/cmd_mac.c +++ b/common/cmd_mac.c @@ -44,20 +44,6 @@ U_BOOT_CMD( " - program date\n" "mac ports\n" " - program the number of ports\n" - "mac 0\n" - " - program the MAC address for port 0\n" - "mac 1\n" - " - program the MAC address for port 1\n" - "mac 2\n" - " - program the MAC address for port 2\n" - "mac 3\n" - " - program the MAC address for port 3\n" - "mac 4\n" - " - program the MAC address for port 4\n" - "mac 5\n" - " - program the MAC address for port 5\n" - "mac 6\n" - " - program the MAC address for port 6\n" - "mac 7\n" - " - program the MAC address for port 7\n" + "mac X\n" + " - program the MAC address for port X [X=0...7]" ); diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 2d4fc2a41..cdf8c798d 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -1172,39 +1172,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( md, 3, 1, do_mem_md, "memory display", - "[.b, .w, .l] address [# of objects]\n - memory display\n" + "[.b, .w, .l] address [# of objects]" ); U_BOOT_CMD( mm, 2, 1, do_mem_mm, - "memory modify (auto-incrementing)", - "[.b, .w, .l] address\n" " - memory modify, auto increment address\n" + "memory modify (auto-incrementing address)", + "[.b, .w, .l] address" ); U_BOOT_CMD( nm, 2, 1, do_mem_nm, "memory modify (constant address)", - "[.b, .w, .l] address\n - memory modify, read and keep address\n" + "[.b, .w, .l] address" ); U_BOOT_CMD( mw, 4, 1, do_mem_mw, "memory write (fill)", - "[.b, .w, .l] address value [count]\n - write memory\n" + "[.b, .w, .l] address value [count]" ); U_BOOT_CMD( cp, 4, 1, do_mem_cp, "memory copy", - "[.b, .w, .l] source target count\n - copy memory\n" + "[.b, .w, .l] source target count" ); U_BOOT_CMD( cmp, 4, 1, do_mem_cmp, "memory compare", - "[.b, .w, .l] addr1 addr2 count\n - compare memory\n" + "[.b, .w, .l] addr1 addr2 count" ); #ifndef CONFIG_CRC32_VERIFY @@ -1212,7 +1212,7 @@ U_BOOT_CMD( U_BOOT_CMD( crc32, 4, 1, do_mem_crc, "checksum calculation", - "address count [addr]\n - compute CRC32 checksum [save at addr]\n" + "address count [addr]\n - compute CRC32 checksum [save at addr]" ); #else /* CONFIG_CRC32_VERIFY */ @@ -1221,7 +1221,7 @@ U_BOOT_CMD( crc32, 5, 1, do_mem_crc, "checksum calculation", "address count [addr]\n - compute CRC32 checksum [save at addr]\n" - "-v address count crc\n - verify crc of memory area\n" + "-v address count crc\n - verify crc of memory area" ); #endif /* CONFIG_CRC32_VERIFY */ @@ -1230,43 +1230,40 @@ U_BOOT_CMD( base, 2, 1, do_mem_base, "print or set address offset", "\n - print address offset for memory commands\n" - "base off\n - set address offset for memory commands to 'off'\n" + "base off\n - set address offset for memory commands to 'off'" ); U_BOOT_CMD( loop, 3, 1, do_mem_loop, "infinite loop on address range", - "[.b, .w, .l] address number_of_objects\n" - " - loop on a set of addresses\n" + "[.b, .w, .l] address number_of_objects" ); #ifdef CONFIG_LOOPW U_BOOT_CMD( loopw, 4, 1, do_mem_loopw, "infinite write loop on address range", - "[.b, .w, .l] address number_of_objects data_to_write\n" - " - loop on a set of addresses\n" + "[.b, .w, .l] address number_of_objects data_to_write" ); #endif /* CONFIG_LOOPW */ U_BOOT_CMD( mtest, 5, 1, do_mem_mtest, - "simple RAM test", - "[start [end [pattern [iterations]]]]\n" - " - simple RAM read/write test\n" + "simple RAM read/write test", + "[start [end [pattern [iterations]]]]" ); #ifdef CONFIG_MX_CYCLIC U_BOOT_CMD( mdc, 4, 1, do_mem_mdc, "memory display cyclic", - "[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n" + "[.b, .w, .l] address count delay(ms)" ); U_BOOT_CMD( mwc, 4, 1, do_mem_mwc, "memory write cyclic", - "[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n" + "[.b, .w, .l] address value delay(ms)" ); #endif /* CONFIG_MX_CYCLIC */ @@ -1274,6 +1271,6 @@ U_BOOT_CMD( U_BOOT_CMD( unzip, 4, 1, do_unzip, "unzip a memory region", - "srcaddr dstaddr [dstsize]\n" + "srcaddr dstaddr [dstsize]" ); #endif /* CONFIG_CMD_UNZIP */ diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index 6470baceb..b19ad0e63 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -394,8 +394,7 @@ U_BOOT_CMD (frd, 3, 1, do_frd, " 0 - non blocking data read\n" " 1 - non blocking control read\n" " 2 - blocking data read\n" - " 3 - blocking control read\n"); - + " 3 - blocking control read"); U_BOOT_CMD (fwr, 4, 1, do_fwr, "write data to FSL", @@ -403,11 +402,11 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr, " 0 - non blocking data write\n" " 1 - non blocking control write\n" " 2 - blocking data write\n" - " 3 - blocking control write\n"); + " 3 - blocking control write"); U_BOOT_CMD (rspr, 3, 1, do_rspr, "read/write special purpose register", "- reg_num [write value] read/write special purpose register\n" " 1 - MSR - Machine status register\n" " 3 - EAR - Exception address register\n" - " 5 - ESR - Exception status register\n"); + " 5 - ESR - Exception status register"); diff --git a/common/cmd_mgdisk.c b/common/cmd_mgdisk.c index 48323d45b..aadc33563 100644 --- a/common/cmd_mgdisk.c +++ b/common/cmd_mgdisk.c @@ -70,7 +70,7 @@ U_BOOT_CMD( " - random read : mgd read [from] [to] [size]\n" " - random write : mgd write [from] [to] [size]\n" " - sector read : mgd readsec [sector] [to] [counts]\n" - " - sector write : mgd writesec [from] [sector] [counts]\n" + " - sector write : mgd writesec [from] [sector] [counts]" ); #endif diff --git a/common/cmd_mii.c b/common/cmd_mii.c index d70031aaa..65e13c3eb 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -460,5 +460,5 @@ U_BOOT_CMD( "mii read - read MII PHY register \n" "mii write - write MII PHY register \n" "mii dump - pretty-print (0-5 only)\n" - "Addr and/or reg may be ranges, e.g. 2-7.\n" + "Addr and/or reg may be ranges, e.g. 2-7." ); diff --git a/common/cmd_misc.c b/common/cmd_misc.c index 024299a87..b97537ecd 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -56,7 +56,7 @@ int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( irqinfo, 1, 1, do_irqinfo, "print information about IRQs", - NULL + "" ); #endif @@ -64,5 +64,5 @@ U_BOOT_CMD( sleep , 2, 1, do_sleep, "delay execution for some time", "N\n" - " - delay execution for N seconds (N is _decimal_ !!!)\n" + " - delay execution for N seconds (N is _decimal_ !!!)" ); diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 039fe59c7..32fe49b77 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -89,7 +89,7 @@ U_BOOT_CMD( mmc, 3, 1, do_mmc, "MMC sub-system", "init [dev] - init MMC sub system\n" - "mmc device [dev] - show or set current device\n" + "mmc device [dev] - show or set current device" ); #else /* !CONFIG_GENERIC_MMC */ @@ -135,9 +135,10 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } -U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo, - "print MMC information", - "\n"); +U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo, + "mmcinfo -- display MMC info\n", + "" +); int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -231,5 +232,5 @@ U_BOOT_CMD( "read addr blk# cnt\n" "mmc write addr blk# cnt\n" "mmc rescan \n" - "mmc list - list available devices\n"); + "mmc list - lists available devices"); #endif diff --git a/common/cmd_mp.c b/common/cmd_mp.c index a0839c2fb..faa870013 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -78,7 +78,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) " Default for r3 is and r6 is 0\n" \ "\n" \ " When cpu is released r4 and r5 = 0.\n" \ - " r7 will contain the size of the initial mapped area\n" + " r7 will contain the size of the initial mapped area" #endif U_BOOT_CMD( @@ -86,8 +86,9 @@ U_BOOT_CMD( "Multiprocessor CPU boot manipulation and release", " reset - Reset cpu \n" "cpu status - Status of cpu \n" - "cpu release [args] - Release cpu at with [args]\n" + "cpu release [args] - Release cpu at with [args]" #ifdef CPU_ARCH_HELP + "\n" CPU_ARCH_HELP #endif - ); +); diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 8bd1db7d2..2d1446ecb 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -1863,7 +1863,7 @@ U_BOOT_CMD( chpart, 2, 0, do_chpart, "change active partition", "part-id\n" - " - change active partition (e.g. part-id = nand0,1)\n" + " - change active partition (e.g. part-id = nand0,1)" ); U_BOOT_CMD( @@ -1898,6 +1898,6 @@ U_BOOT_CMD( " := standard linux memsize OR '-' to denote all remaining space\n" " := partition start offset within the device\n" " := '(' NAME ')'\n" - " := when set to 'ro' makes partition read-only (not used, passed to kernel)\n" + " := when set to 'ro' makes partition read-only (not used, passed to kernel)" ); /***************************************************/ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 1992531f4..94514160b 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -476,25 +476,26 @@ usage: return 1; } -U_BOOT_CMD(nand, 5, 1, do_nand, - "NAND sub-system", - "info - show available NAND devices\n" - "nand device [dev] - show or set current device\n" - "nand read - addr off|partition size\n" - "nand write - addr off|partition size\n" - " read/write 'size' bytes starting at offset 'off'\n" - " to/from memory address 'addr', skipping bad blocks.\n" - "nand erase [clean] [off size] - erase 'size' bytes from\n" - " offset 'off' (entire device if not specified)\n" - "nand bad - show bad blocks\n" - "nand dump[.oob] off - dump page\n" - "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" - "nand markbad off - mark bad block at offset (UNSAFE)\n" - "nand biterr off - make a bit error at offset (UNSAFE)\n" +U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand, + "NAND sub-system", + "info - show available NAND devices\n" + "nand device [dev] - show or set current device\n" + "nand read - addr off|partition size\n" + "nand write - addr off|partition size\n" + " read/write 'size' bytes starting at offset 'off'\n" + " to/from memory address 'addr', skipping bad blocks.\n" + "nand erase [clean] [off size] - erase 'size' bytes from\n" + " offset 'off' (entire device if not specified)\n" + "nand bad - show bad blocks\n" + "nand dump[.oob] off - dump page\n" + "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" + "nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n" + "nand biterr off - make a bit error at offset (UNSAFE)" #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK - "nand lock [tight] [status]\n" - " bring nand to lock state or display locked pages\n" - "nand unlock [offset] [size] - unlock section\n" + "\n" + "nand lock [tight] [status]\n" + " bring nand to lock state or display locked pages\n" + "nand unlock [offset] [size] - unlock section" #endif ); @@ -673,8 +674,8 @@ usage: U_BOOT_CMD(nboot, 4, 1, do_nandboot, "boot from NAND device", - "[partition] | [[[loadAddr] dev] offset]\n"); - + "[partition] | [[[loadAddr] dev] offset]" +); #endif #else /* CONFIG_NAND_LEGACY */ @@ -941,7 +942,7 @@ U_BOOT_CMD( " offset `off' (entire device if not specified)\n" "nand bad - show bad blocks\n" "nand read.oob addr off size - read out-of-band data\n" - "nand write.oob addr off size - read out-of-band data\n" + "nand write.oob addr off size - read out-of-band data" ); int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -1081,7 +1082,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nboot, 4, 1, do_nandboot, "boot from NAND device", - "loadAddr dev\n" + "loadAddr dev" ); #endif diff --git a/common/cmd_net.c b/common/cmd_net.c index 92bbf85d1..68183c49a 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -40,7 +40,7 @@ int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootp, 3, 1, do_bootp, "boot image via network using BOOTP/TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( tftpboot, 3, 1, do_tftpb, "boot image via network using TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -62,7 +62,7 @@ int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( rarpboot, 3, 1, do_rarpb, "boot image via network using RARP/TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); #if defined(CONFIG_CMD_DHCP) @@ -74,7 +74,7 @@ int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dhcp, 3, 1, do_dhcp, "boot image via network using DHCP/TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); #endif @@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nfs, 3, 1, do_nfs, "boot image via network using NFS protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); #endif @@ -269,7 +269,7 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ping, 2, 1, do_ping, "send ICMP ECHO_REQUEST to network host", - "pingAddress\n" + "pingAddress" ); #endif diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index ac9e5cfc3..2186205a1 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -569,7 +569,7 @@ int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( saveenv, 1, 0, do_saveenv, "save environment variables to persistent storage", - NULL + "" ); #endif @@ -602,7 +602,7 @@ U_BOOT_CMD( "print environment variables", "\n - print values of all environment variables\n" "printenv name ...\n" - " - print value of environment variable 'name'\n" + " - print value of environment variable 'name'" ); U_BOOT_CMD( @@ -611,7 +611,7 @@ U_BOOT_CMD( "name value ...\n" " - set environment variable 'name' to 'value ...'\n" "setenv name\n" - " - delete environment variable 'name'\n" + " - delete environment variable 'name'" ); #if defined(CONFIG_CMD_ASKENV) @@ -627,7 +627,7 @@ U_BOOT_CMD( " - get environment variable 'name' from stdin (max 'size' chars)\n" "askenv name [message] size\n" " - display 'message' string and get environment variable 'name'" - "from stdin (max 'size' chars)\n" + "from stdin (max 'size' chars)" ); #endif @@ -637,6 +637,6 @@ U_BOOT_CMD( run, CONFIG_SYS_MAXARGS, 1, do_run, "run commands in an environment variable", "var [...]\n" - " - run the commands in the environment variable(s) 'var'\n" + " - run the commands in the environment variable(s) 'var'" ); #endif diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index e8f06d7f4..85bd2cb68 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -486,5 +486,5 @@ U_BOOT_CMD( "onenand test [off size] - test 'size' bytes from\n" " offset 'off' (entire device if not specified)\n" "onenand dump[.oob] off - dump page\n" - "onenand markbad off - mark bad block at offset (UNSAFE)\n" + "onenand markbad off [...] - mark bad block(s) at offset (UNSAFE)" ); diff --git a/common/cmd_otp.c b/common/cmd_otp.c index 4be43448a..30af5a31a 100644 --- a/common/cmd_otp.c +++ b/common/cmd_otp.c @@ -233,4 +233,5 @@ U_BOOT_CMD(otp, 7, 0, do_otp, "otp write [--force] [count] [half]\n" " - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n" "otp lock \n" - " - lock 'count' pages starting at 'page'\n"); + " - lock 'count' pages starting at 'page'" +); diff --git a/common/cmd_pci.c b/common/cmd_pci.c index 4a9317f16..8a260df8b 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -555,5 +555,5 @@ U_BOOT_CMD( "pci modify[.b, .w, .l] b.d.f address\n" " - modify, auto increment CFG address\n" "pci write[.b, .w, .l] b.d.f address value\n" - " - write to CFG address\n" + " - write to CFG address" ); diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index e44845697..e576b0c59 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -90,8 +90,8 @@ U_BOOT_CMD( pinit, 2, 0, do_pinit, "PCMCIA sub-system", "on - power on PCMCIA socket\n" - "pinit off - power off PCMCIA socket\n" - ); + "pinit off - power off PCMCIA socket" +); #endif diff --git a/common/cmd_portio.c b/common/cmd_portio.c index 41b1991a2..f8befee29 100644 --- a/common/cmd_portio.c +++ b/common/cmd_portio.c @@ -94,7 +94,7 @@ int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( out, 3, 1, do_portio_out, "write datum to IO port", - "[.b, .w, .l] port value\n - output to IO port\n" + "[.b, .w, .l] port value\n - output to IO port" ); int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) @@ -159,5 +159,5 @@ U_BOOT_CMD( in, 2, 1, do_portio_in, "read data from an IO port", "[.b, .w, .l] port\n" - " - read datum from IO port\n" + " - read datum from IO port" ); diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 0e28c05b8..abb9941af 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -383,5 +383,6 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( reginfo, 2, 1, do_reginfo, "print register information", + "" ); #endif diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 14e4bd40e..8ede78231 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -104,7 +104,7 @@ U_BOOT_CMD( reiserls, 4, 1, do_reiserls, "list files in a directory (default /)", " [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'\n" + " - list files from 'dev' on 'interface' in a 'directory'" ); /****************************************************************************** @@ -235,5 +235,5 @@ U_BOOT_CMD( "load binary file from a Reiser filesystem", " [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from dos filesystem\n" + " to address 'addr' from dos filesystem" ); diff --git a/common/cmd_sata.c b/common/cmd_sata.c index e84977870..a8147e0e0 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -200,4 +200,5 @@ U_BOOT_CMD( "sata device [dev] - show or set current device\n" "sata part [dev] - print partition table\n" "sata read addr blk# cnt\n" - "sata write addr blk# cnt\n"); + "sata write addr blk# cnt" +); diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index dd2c1ae73..f89492fe2 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -623,11 +623,11 @@ U_BOOT_CMD( "scsi device [dev] - show or set current device\n" "scsi part [dev] - print partition table of one or all SCSI devices\n" "scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" - " to memory address `addr'\n" + " to memory address `addr'" ); U_BOOT_CMD( scsiboot, 3, 1, do_scsiboot, "boot from SCSI device", - "loadAddr dev:part\n" + "loadAddr dev:part" ); diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index 9a5e720d6..f8b5d4dcf 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -66,5 +66,5 @@ U_BOOT_CMD( "set environment variable as the result of eval expression", "name value1 value2\n" " - set environment variable 'name' to the result of the evaluated\n" - " express specified by . can be &, |, ^, +, -, *, /, %\n" + " express specified by . can be &, |, ^, +, -, *, /, %" ); diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 6a60b1680..2d463a8c9 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -188,4 +188,5 @@ U_BOOT_CMD( " `offset' to memory at `addr'\n" "sf write addr offset len - write `len' bytes from memory\n" " at `addr' to flash at `offset'\n" - "sf erase offset len - erase `len' bytes from `offset'\n"); + "sf erase offset len - erase `len' bytes from `offset'" +); diff --git a/common/cmd_source.c b/common/cmd_source.c index 43e131592..965b8b1b0 100644 --- a/common/cmd_source.c +++ b/common/cmd_source.c @@ -229,10 +229,11 @@ U_BOOT_CMD( "run script from memory", "[addr]\n" "\t- run script starting at addr\n" - "\t- A valid image header must be present\n" + "\t- A valid image header must be present" #if defined(CONFIG_FIT) + "\n" "For FIT format uImage addr must include subimage\n" - "unit name in the form of addr:\n" + "unit name in the form of addr:" #endif ); @@ -251,6 +252,6 @@ do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( autoscr, 2, 0, do_autoscr, "DEPRECATED - use \"source\" command instead", - "DEPRECATED - use \"source\" command instead\n" + "" ); #endif diff --git a/common/cmd_spi.c b/common/cmd_spi.c index 746d14f21..ab7aac780 100644 --- a/common/cmd_spi.c +++ b/common/cmd_spi.c @@ -142,5 +142,5 @@ U_BOOT_CMD( " - Send bits from out the SPI\n" " - Identifies the chip select of the device\n" " - Number of bits to send (base 10)\n" - " - Hexadecimal string that gets sent\n" + " - Hexadecimal string that gets sent" ); diff --git a/common/cmd_strings.c b/common/cmd_strings.c index 4517ba29e..3a0d8ff43 100644 --- a/common/cmd_strings.c +++ b/common/cmd_strings.c @@ -43,4 +43,5 @@ int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(strings, 3, 1, do_strings, "display strings", " [byte count]\n" - " - display strings at for at least [byte count] or first double NUL\n"); + " - display strings at for at least [byte count] or first double NUL" +); diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 64a730724..bbca3892c 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -609,5 +609,5 @@ U_BOOT_CMD(ubi, 6, 1, do_ubi, "[Legends]\n" " volume: charater name\n" " size: KiB, MiB, GiB, and bytes\n" - " type: s[tatic] or d[ynamic] (default=dynamic)\n" + " type: s[tatic] or d[ynamic] (default=dynamic)" ); diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c index 4767aa4b6..d9f60d51e 100644 --- a/common/cmd_ubifs.c +++ b/common/cmd_ubifs.c @@ -119,14 +119,17 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ubifsmount, 2, 0, do_ubifs_mount, "mount UBIFS volume", - "\n"); + "" +); U_BOOT_CMD(ubifsls, 2, 0, do_ubifs_ls, - "list files in a directory", - "[directory]\n" - " - list files in a 'directory' (default '/')\n"); + "list files in a directory", + "[directory]\n" + " - list files in a 'directory' (default '/')" +); U_BOOT_CMD(ubifsload, 4, 0, do_ubifs_load, - "load file from an UBIFS filesystem", - " [bytes]\n" - " - load file 'filename' to address 'addr'\n"); + "load file from an UBIFS filesystem", + " [bytes]\n" + " - load file 'filename' to address 'addr'" +); diff --git a/common/cmd_universe.c b/common/cmd_universe.c index bfb91b58c..0a6d722a0 100644 --- a/common/cmd_universe.c +++ b/common/cmd_universe.c @@ -382,5 +382,5 @@ U_BOOT_CMD( " 03 -> Configuration Space\n" " [vdw] = VMEbus Maximum Datawidth: 01 -> D8 Data Width\n" " 02 -> D16 Data Width\n" - " 03 -> D32 Data Width\n" + " 03 -> D32 Data Width" ); diff --git a/common/cmd_usb.c b/common/cmd_usb.c index a18e16e10..7b8ee6b48 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -686,14 +686,14 @@ U_BOOT_CMD( "usb part [dev] - print partition table of one or all USB storage" " devices\n" "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" - " to memory address `addr'\n" + " to memory address `addr'" ); U_BOOT_CMD( usbboot, 3, 1, do_usbboot, "boot from USB device", - "loadAddr dev:part\n" + "loadAddr dev:part" ); #else @@ -702,6 +702,6 @@ U_BOOT_CMD( "USB sub-system", "reset - reset (rescan) USB controller\n" "usb tree - show USB device tree\n" - "usb info [dev] - show available USB devices\n" + "usb info [dev] - show available USB devices" ); #endif diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c index 84d9530aa..9c5b0385b 100644 --- a/common/cmd_vfd.c +++ b/common/cmd_vfd.c @@ -71,7 +71,7 @@ U_BOOT_CMD( "/N\n" " - load bitmap N to the VFDs (N is _decimal_ !!!)\n" "vfd ADDR\n" - " - load bitmap at address ADDR\n" + " - load bitmap at address ADDR" ); #endif diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index a45d2480e..5593b2d24 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -180,11 +180,12 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(imxtract, 4, 1, do_imgextract, - "extract a part of a multi-image", - "addr part [dest]\n" - " - extract from legacy image at and copy to \n" + "extract a part of a multi-image", + "addr part [dest]\n" + " - extract from legacy image at and copy to " #if defined(CONFIG_FIT) - "addr uname [dest]\n" - " - extract subimage from FIT image at and copy to \n" + "\n" + "addr uname [dest]\n" + " - extract subimage from FIT image at and copy to " #endif ); diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c index c47ea769f..d448d0483 100644 --- a/common/cmd_yaffs2.c +++ b/common/cmd_yaffs2.c @@ -143,71 +143,71 @@ int do_ydump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ymount, 3, 0, do_ymount, "mount yaffs", - "\n" + "" ); U_BOOT_CMD( yumount, 3, 0, do_yumount, "unmount yaffs", - "\n" + "" ); U_BOOT_CMD( yls, 4, 0, do_yls, "yaffs ls", - "[-l] name\n" + "[-l] name" ); U_BOOT_CMD( yrd, 2, 0, do_yrd, "read file from yaffs", - "filename\n" + "filename" ); U_BOOT_CMD( ywr, 4, 0, do_ywr, "write file to yaffs", - "filename value num_vlues\n" + "filename value num_vlues" ); U_BOOT_CMD( yrdm, 3, 0, do_yrdm, "read file to memory from yaffs", - "filename offset\n" + "filename offset" ); U_BOOT_CMD( ywrm, 4, 0, do_ywrm, "write file from memory to yaffs", - "filename offset size\n" + "filename offset size" ); U_BOOT_CMD( ymkdir, 2, 0, do_ymkdir, "YAFFS mkdir", - "dirname\n" + "dirname" ); U_BOOT_CMD( yrmdir, 2, 0, do_yrmdir, "YAFFS rmdir", - "dirname\n" + "dirname" ); U_BOOT_CMD( yrm, 2, 0, do_yrm, "YAFFS rm", - "path\n" + "path" ); U_BOOT_CMD( ymv, 4, 0, do_ymv, "YAFFS mv", - "oldPath newPath\n" + "oldPath newPath" ); U_BOOT_CMD( ydump, 2, 0, do_ydump, "YAFFS device struct", - "dirname\n" + "dirname" ); diff --git a/common/command.c b/common/command.c index 16f3afe39..b57f8dfc8 100644 --- a/common/command.c +++ b/common/command.c @@ -39,7 +39,7 @@ do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( version, 1, 1, do_version, "print monitor version", - NULL + "" ); #if defined(CONFIG_CMD_ECHO) @@ -73,7 +73,7 @@ U_BOOT_CMD( echo, CONFIG_SYS_MAXARGS, 1, do_echo, "echo args to console", "[args..]\n" - " - echo args to console; \\c suppresses newline\n" + " - echo args to console; \\c suppresses newline" ); #endif @@ -204,8 +204,7 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( test, CONFIG_SYS_MAXARGS, 1, do_test, "minimal test like /bin/sh", - "[args..]\n" - " - test functionality\n" + "[args..]" ); int @@ -223,7 +222,7 @@ do_exit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( exit, 2, 1, do_exit, "exit script", - " - exit functionality\n" + "" ); @@ -314,15 +313,15 @@ U_BOOT_CMD( "'help' prints online help for the monitor commands.\n\n" "Without arguments, it prints a short usage message for all commands.\n\n" "To get detailed help information for specific commands you can type\n" - "'help' with one or more command names as arguments.\n" + "'help' with one or more command names as arguments." ); -/* This do not ust the U_BOOT_CMD macro as ? can't be used in symbol names */ +/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ #ifdef CONFIG_SYS_LONGHELP cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { "?", CONFIG_SYS_MAXARGS, 1, do_help, "alias for 'help'", - NULL + "" }; #else cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { diff --git a/common/hush.c b/common/hush.c index cf5782a7c..97fd07067 100644 --- a/common/hush.c +++ b/common/hush.c @@ -3627,7 +3627,7 @@ U_BOOT_CMD( "print local hushshell variables", "\n - print values of all hushshell variables\n" "showvar name ...\n" - " - print value of hushshell variable 'name'\n" + " - print value of hushshell variable 'name'" ); #endif diff --git a/common/lcd.c b/common/lcd.c index 41551707d..74a5c7769 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -427,7 +427,7 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( cls, 1, 1, lcd_clear, "clear screen", - NULL + "" ); /*----------------------------------------------------------------------*/ diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c index 51d5cf636..6e295994a 100644 --- a/cpu/arm_cortexa8/omap3/board.c +++ b/cpu/arm_cortexa8/omap3/board.c @@ -335,8 +335,8 @@ usage: U_BOOT_CMD( nandecc, 2, 1, do_switch_ecc, "nandecc - switch OMAP3 NAND ECC calculation algorithm\n", - "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm\n" - ); + "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm" +); #endif /* CONFIG_NAND_OMAP_GPMC */ diff --git a/cpu/mpc512x/iim.c b/cpu/mpc512x/iim.c index 6cdc42259..8f2eb37e1 100644 --- a/cpu/mpc512x/iim.c +++ b/cpu/mpc512x/iim.c @@ -389,6 +389,6 @@ U_BOOT_CMD( " no args for entire bank\n" "fuse prog - program fuse at row , bit <_bit>\n" " is 0-31, is 0-7; eg. 13_2 \n" - " WARNING - this is permanent\n" - ); + " WARNING - this is permanent" +); #endif /* CONFIG_CMD_FUSE */ diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c index 5992111c1..1f9086242 100644 --- a/cpu/mpc512x/speed.c +++ b/cpu/mpc512x/speed.c @@ -138,7 +138,7 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(clocks, 1, 0, do_clocks, "print clock configuration", - " clocks\n" + " clocks" ); int prt_mpc512x_clks (void) diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 9b7e7b576..95b558f92 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -545,5 +545,5 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(clocks, 1, 0, do_clocks, "print clock configuration", - " clocks\n" + " clocks" ); diff --git a/cpu/nios/asmi.c b/cpu/nios/asmi.c index 2c2e838de..33553b7ca 100644 --- a/cpu/nios/asmi.c +++ b/cpu/nios/asmi.c @@ -48,7 +48,7 @@ "asmi write addr offset count\n"\ " - write count bytes to offset from addr.\n"\ "asmi verify addr offset count\n"\ - " - verify count bytes at offset from addr.\n" + " - verify count bytes at offset from addr." /*-----------------------------------------------------------------------*/ diff --git a/cpu/nios2/epcs.c b/cpu/nios2/epcs.c index 968b50f3d..483b249cd 100644 --- a/cpu/nios2/epcs.c +++ b/cpu/nios2/epcs.c @@ -47,7 +47,7 @@ "epcs write addr offset count\n"\ " - write count bytes to offset from addr.\n"\ "epcs verify addr offset count\n"\ - " - verify count bytes at offset from addr.\n" + " - verify count bytes at offset from addr." /*-----------------------------------------------------------------------*/ diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c index 251204beb..77bc8b569 100644 --- a/cpu/nios2/sysid.c +++ b/cpu/nios2/sysid.c @@ -53,6 +53,6 @@ int do_sysid (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sysid, 1, 1, do_sysid, "display Nios-II system id", - "\n - display Nios-II system id\n" + "" ); #endif /* CONFIG_SYS_NIOS_SYSID_BASE */ diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 1c5e314d9..e8273ee36 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -221,7 +221,7 @@ U_BOOT_CMD( "pca953x invert pin 0|1\n" " - disable/enable polarity inversion for reads\n" "pca953x intput pin\n" - " - set pin as input and read value\n" + " - set pin as input and read value" ); #endif /* CONFIG_CMD_PCA953X */ diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c index 8b5fbbc45..f2510a38f 100644 --- a/drivers/misc/ds4510.c +++ b/drivers/misc/ds4510.c @@ -404,12 +404,14 @@ U_BOOT_CMD( "ds4510 pullup pin 0|1\n" " - disable/enable pullup on specified pin\n" "ds4510 nv 0|1\n" - " - make gpio and seeprom writes volatile/non-volatile\n" + " - make gpio and seeprom writes volatile/non-volatile" #ifdef CONFIG_CMD_DS4510_RST + "\n" "ds4510 rstdelay 0-3\n" - " - set reset output delay\n" + " - set reset output delay" #endif #ifdef CONFIG_CMD_DS4510_MEM + "\n" "ds4510 eeprom read addr off cnt\n" "ds4510 eeprom write addr off cnt\n" " - read/write 'cnt' bytes at EEPROM offset 'off'\n" @@ -418,7 +420,7 @@ U_BOOT_CMD( " - read/write 'cnt' bytes at SRAM-shadowed EEPROM offset 'off'\n" "ds4510 sram read addr off cnt\n" "ds4510 sram write addr off cnt\n" - " - read/write 'cnt' bytes at SRAM offset 'off'\n" + " - read/write 'cnt' bytes at SRAM offset 'off'" #endif ); #endif /* CONFIG_CMD_DS4510 */ diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index f114fe06a..918bfa748 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -473,5 +473,6 @@ U_BOOT_CMD( qe, 4, 0, qe_cmd, "QUICC Engine commands", "fw [] - Upload firmware binary at address to " - "the QE,\n\twith optional length verification.\n" - ); + "the QE,\n" + "\twith optional length verification." +); -- cgit v1.2.3